BRES2015-0257I
Q�i D
78-495 CALLE TAMPICO VOICE (760) 777-7125 � D
LA QUINTA, CALIFORNIA 92253 FAX (760) 777-7011
COMMUNITY DEVELOPM D4PARJMEr#-0 2015 I SPECTIONS (760) 777-7153
BUILDING P DI
CITY OF LA QUINTA Date: 7/29/2015
Application Number: BRES2015-0257 COMMUNITY DL_NELQWRIT DEPARTMENT -
Property Address: 54479 RIVIERA JAMES HUDSON
APN: 775031030 54479 RIVIERA
Application Description: HUDSON RESIDENCE ADDTION /REMODEL LA QUINTA, CA 92253
Property Zoning: -
Application Valuation: $10,342.40
Applicant: Contractor:
BOB EDWARDS CONSTRUCTION INCOR BOB EDWARDS CONSTRUCTION INCOR
51-455 DESERT CLUB DRIVE 51-455 DESERT CLUB DRIVE
LA QUINTA, CA 92253 LA QUINTA, CA 92253
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am license under provisions of Chapter
9 {commencing with Section 70 00} of Division f t Less Professions Code,
and my Lic@nse isin full force and effect.
License CIaIIP.s: B 7' License No.: 6848 J
36 �
0 'Date: Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
of the Business and Professions Code) or that he or she is exempt therefrom and the 4
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
I ) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does no
apply to an owner of property who builds or improves thereon, and who does the wore
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
1
( I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
I ) I am exempt under Sec. . B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's
Lender's
(760)777-8202
Llc. No.: 684857
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
Carrier: _ Policy Number:_
I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if�should become subjecYto the
workers' co . pen tion provisions of Sectio 70 f La r Code, I shall forthwith
comply�w%it .tho � rovisions.
Date: ` Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT .
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comp y with all city and county ordinances and state laws relating to building
constructi , an hereby authorize representatives of th' cit t en� u the above•
mentioned ro rty for inspection purposes.
Date: Signature (Applicant or Agent):
FINANCIAL •
1•
- DESCRIPTION';
; ACCOUNT
QTY " AMOUNT.:
PAID
PAID DATE
ADDITION, EA ADDITIONAL 500 SF
101-0000-42400
0 $62.36
$0.00
PAID BY • .`> ' • '' .
METHOD
RECEIPT # :
CHECK #
CLTD BY,
DESCRIPTION
ACCOUNT
QTY;
- AMOUNT."
'PAID
PAID'DA.TE
ADDITION, EA ADDITIONAL 500 SF PC
101-0000-42600
0
$17.40
$0.00
PAID. BY ,
-METHOD
RECEIPT.#
CHECK #-,CLTD-BY
DESCRIPTION;
ACCOUNT
QTY'
AMOUNT =
,, PAID
PAID DATE
ADDITION, FIRST 100 SF
101-0000-42400
0
$120.83
$0.00
PAIUBY
METHOD
RECEIPT#
_, CHECK# '
CLTD BY
DESCRIPTION
ACCOUNT
QTY
AMOUNT ,`'.
PAID
PAID DATE.
ADDITION, FIRST 100 SF PC
101-0000-42600
0
$171.14
$0.00
PAID BY
METHOD
` RECEIPT#'
"" CHECK #
CLTD BY
Total Paid forADDITION: $371.73 $0.00
DESCRIPTION ; .
::.ACCOUNT
QTY
-AMOUNT
PAID
PAID •DATE"
HOURLY PLAN CHECK - YES
101-0000-42600
0.75
$52.50
$0.00
PAID BY
METHOD
RECEIPT•#,
CHECK #
`'CLTD BY
Total Paid for BLDG CITY STAFF - PER HOUR: $52.50 $0.00
DESCRIPTION
"ACCOUNT
QTY .
' . " AMOUNT ' -
.`PAID • •
PAIDDATE
BSAS SB1473 FEE
101-0000-20306
0
$1.00
$0.00
PAID BY "
METHOD `�
RECEIPT.,# _ "`' :
CHECK.#
CLTD BY
Total Paid forBUILDING STANDARDS ADMINISTRATION BSA $1.00 $0.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
.PAID
PAID DATE
RESIDENTIAL, FIRST 1,000SF
101-0000-42403
0
$145.03
$0.00
..:' PAID BY
METHOD .
RECEIP.T`#
"CHECK.# ..
CLTD BY
DESCRIPTION
ACCOUNT
CITY
AMOUNT ,.'
PAID
PAID DATE
RESIDENTIAL, FIRST 1,000SF, PC
101-0000-42600
0
$47.86
$0.00
PAID BY -
METHOD,: .
RECEIPT#
..:CH ECK# .".
'CLTDBY
Total Paid for ELECTRICAL - NEW CONSTRUCTION: $192.89 $0.00
+ " ^ DESCRIPTION": "
ACCOUNT
:: QTY F
.: .. AMOUNT.,
- PAID,
PAID DATE
APPLIANCE REPAIR/ALTERATION
101-0000-42402
0
$12.09
$0.00
PAID BY
METHOD :
RECEIPT#
CHECK #.
>.^ CLTD BY_.'
`'`' ".i ' +
f �'i�y��
`17
r».tet AMOUNT��v
� '.; PAID
DATE
s`v"EDESCRIPTION nr�,�)
i t�Y,^�ACCOUNT,s .
aQTyYr
� i r� _.^'PAID
APPLIANCE REPAIR/ALTERATION PC
101-0000-42600
0
$4.83
$0.00
xt Y. PAID BY y '+ fi'�
Tf ;METHOD } ` a
r RECEIPT #
*fir#,CHECK,# =
BY
„_ ;
..SLTD
Total Paid forMECHANICAL: $16.92 $0.00
" h DESCRIPTION
"ACCOUNT
�TY�
Q
AMOUNT. "
` PAID '
'
PAID.DATE
S
'rsr�
ROOF DRAIN
101-0000-42401
0
$12.09
$0.00
°PAID BY f. ' ' t:
., '."�
r'T `)RECEIP.T# i
rol zCHEGK#
CLb BY'
-,-!:METHOD-
<,DES1 RIPTION ; _ ;., _
;�t�ACCOUNT' 4 T�
CfTY
AMOUNT y�
x k PAID` °
,PAID DATE
,M
..
ROOF DRAIN PC
101-0000-42600
0
$12.09
$0.00
METHOD,..RECEIPT#
`,^
CLTDBY.'
T
f:.
_CHECK#'
Total Paid for PLUMBING FEES: $24.18 $0.00
DESCRIPTION°"' ° }``
<' ACCOUNT rz
CITY :AMOUNT=
PAID
'PAID DATE..
:'
,
SMI - RESIDENTIAL
101-0000-20308
0
$1.34
$0.00
" frPAID BYr•'.,_
' ° '�'>i=
4" :RECEIPT#a
:CHECK
CLTD BY. t
.rMETHOD
m
Total Paid forSTRONG MOTION INSTRUMENTATION SM! $1.34 $0.00
• ALS: $660.56 $0.00
-fr
it : ry t.,.t�.
Ir �111
dam..,,
PERMIT NUMBER 2
1 {
`, � ..;a'� �''i.'w,: r*^•x+.�, .v .4m 01 Now
ur
Description: HUDSON RESIDENCE ADDTION / REMODEL
Type: BUILDING, RESIDENTIAL
Subtype: ADDITION
Status: APPROVED
Applied: 7/6/2015 EVA
Approved: 7/29/2015 JJO
Parcel No: 775031030 Site Address: 54479 RIVIERA,CA
Subdivision: TR 24317-1
-Block: Lot: 2
ACTION DATE .. r
Issued:
Lot Sq Ft: 0
Building Scl Ft: 0
Zoning:
Finaled:
Valuation: $10,342.40
Occupancy Type:
Construction Type:
Expired:
7/27/2015
7/27/2015
PLANS PULLED FROM JIM'S DESK AND PROCESSED
PLAN CHECK COMMENTS
No. Buildings: 0
No. Stories: 0
No. Unites: 0
Details: 128 SQ. FT. ATRIUM CONVERSION. ADD WINDOWS, SKYLIGHT, ELECTRICAL RECEPTACLES. 2013 CALIFORNIA BUILDING CODES.
4
Applied to Approved,
Printed: Wednesday, July 29, 2015 2:46:36 PM 1 of 4 CRWYSTEMS
ADDITIONAL
CHRONOLOGY
-CHRON000GY,TYPESTAFF - `
NAME
ACTION DATE .. r
=. COMPLETION DATE "
;,,~> t G ` , r. NOTES
NOTE
KAY HENSEL
7/27/2015
7/27/2015
PLANS PULLED FROM JIM'S DESK AND PROCESSED
PLAN CHECK COMMENTS
FROM CONSULTANT
MARY FASANO
7/20/2015
7/21/2015
RETURNED FROM YOUNG STRUCTUAL APPROVED
RECEIVED
PLAN CHECK PICKED UP
PHILIP JUAREZ
7/23/2015
7/23/2015
PLANS PICKED UP BY GABRIEL RIOS
PLAN CHECK SENT TO
KAY HENSEL
7/6/2015
7/6/2015
STRUC TO YOUNG - DUE BACK 7/20/2015
OUTSIDE PC
PLAN CHECK SUBMITTAL
ED VASQUEZ
7/6/2015
7/6/2015
RECEIVED
RESUBMITTAL
PHILIP JUAREZ _
7/24/2015
7/24/2015
JIM TOLD ME YO PUT ON HIS DESK.
TELEPHONE CALL
JAKE FUSON
7/21/2015
7/21/2015
JIM NOTIFIED GABRIEL RIOS PLAN REVIEW WAS COMPLETE
AND REVISIONS WERE REQUIRED.
Printed: Wednesday, July 29, 2015 2:46:36 PM 1 of 4 CRWYSTEMS
=1
ILI v I -A MD
0
0 Illy,
�74 T)g K'
Wt
i2�
TELEPHONE CALL I JIM JOHNSON I 7/29/2015 I 7/29/2015 I CALLED JOE TO INFORM HIM PLANS ARE READY TO ISSUE
Printed: Wednesday, July 29, 2015 2:46:36 PM
2 of 4
cmm"
k7W SYSTEMS
I
FINANCIAL
INFORMATION
-'ACCOUNT
QTY
AMOUNT
PAID
PAID DATE.
RECEIPT#
CHECK #
METHOD
PAID BY,
Y
ADDITION, EA
101-0000-42400
0
$62.36
$0.00
ADDITIONAL 500 SF
ADDITION, EA
101-0000-42600
0
$17.40
$0.00
ADDITIONAL 500 SF PC
ADDITION, FIRST 100 SF
101-0000-42400
0
$120.83
$0.00
ADDITION, FIRST 100 SF
101-0000-42600
0
$171.14
$0.00
PC
Total Paid forADDITION: $371.73 $0.00
HOURLY PLAN CHECK -
101-0000-42600
0.75
I
$52.50
I
$0.00
YES
Total Paid for BLDG CITY STAFF - PER HOUR: $52.50 $0.00
BSAS SB1473 FEE
1 101-0000-20306
1 0
$1.00
$0.00
Total Paid forBUILDING STANDARDS ADMINISTRATION $1.00 $0.00
BSA:
RESIDENTIAL, FIRST
101-0000-42403
0
I
$145.03
$0.00
1,OOOSF
Printed: Wednesday, July 29, 2015 2:46:36 PM
2 of 4
cmm"
k7W SYSTEMS
I
0 L BMW
i
�A�T - 1 �4� - --Ill, - — mvilf@
I W'4 �r�tvj-mg• — -
x�al - V
5
1, 7'1
Z401 � -r,, *?L� v.
v
Printed: Wednesday, July 29, 2015 2:46:36 PM 3 of 4 03"WSYSTEMS
PARENT PROJECTS.'.
REVIEW TYPE REVIEWER
e
SEN1DAT If
REViEWS
7AEfLANED'
DOE. DATE' STATUS7
MARKS
=REMARKS
NOT
77t
`7
ELT
DESCRIPTION
A
ACCOUNT
QTY
'I -AMOUNT'
"PAID
,PAID DATE',
RECEIPT #
CHECK
METHOD(.
AID BY -' --.
PBY
RESIDENTIAL, FIRST
101-0000-42600
0
$47.86
$0.00
ENGINEERING
1,000SF, PC
Total Paid for ELECTRICAL - NEW CONSTRUCTION: $192.89 $0.00
APPLIANCE
101-0000-42402
0
$12.09
$0.00
REPAIR/ALTERATION
APPLIANCE
101-0000-42600
0
$4.83
$0.00
REPAIR/ALTERATION PC
Total Paid forMECHANICAL: $16.92 $0.00
ROOF DRAIN
101-0000-42401
0
$12.09.
$0.00
ROOF DRAIN PC
101-0000-42600
0
$12.09
$0.00
Total Paid for PLUMBING FEES: $24.18 $0.06
SMI -RESIDENTIAL
101-0000-20308
1 0
$1.34
$0.00
Total Paid for STRONG MOTION INSTRUMENTATION SMI: $1.34 $0.00
T $0.00 OTALS: $660.56,
Printed: Wednesday, July 29, 2015 2:46:36 PM 3 of 4 03"WSYSTEMS
PARENT PROJECTS.'.
REVIEW TYPE REVIEWER
e
SEN1DAT If
REViEWS
7AEfLANED'
DOE. DATE' STATUS7
MARKS
=REMARKS
NOT
:DATE'S
NON-STRUCTURAL - JAKE FUSON
7/6/2015
7/20/2015 7/21/2015 REVISIONS REQUIRED
SEE 1ST REVIEW.
2 WK
STRUCTURAL - 2 WK YOUNG
7/6/2015
7/20/2015 7/20/2015 READY FOR APPROVAL
ENGINEERING
Printed: Wednesday, July 29, 2015 2:46:36 PM 3 of 4 03"WSYSTEMS
(c "�--" "�-"�. � ��$. �t�' 1 w , S f"��.: - - - � ""'`�.',t..,, .,i�;' ,. » � � fes, � •..'yyF'.'r
Lz
}—......� ��a', ��. ... --._,-....� _.__..- ..- _.... :_�E:n. ,.. _ _ - _ a� - �...kr..R-. .a-. _ {.r:..'-''�..£�fsiwiF"p`e .8wiis�i v... :�4.,•� u�,:. �.,+.'�w �h_ �"'..^�t
< J NOP
rRUCTURAL- IJIM JOHNSON 17/24/2015I 8/7/2015 7/29/2015 I APPROVED
2 WK
"`' :�. '°k Jf..r 1 ''�i art � _.ttit..lfR"' 4 sE tj,;u.
'•+.�.w�litw'�„ 'a
.
�.i.+�.�.4:�� ��'�'C.4�:: .h.....�.: � a�i.�.�
?� A..g.�.-.1 Sb;!'aa., •¢�'`'e
Attachment.Type_
'CREATED s; =
OWNER '.;f
`<DESCRIPTION
?� a PATHNAME _
'T BDIR�r� '§r
i'iETRAKIT ENABLED .
Ft „
BRES2015-0257 - 1ST
1ST REVIEW NON-
REVIEW NOW
DOC
.7/21/2015
JAKE FUSON
STRUCTURAL
0
STRUCTURAL
CORRECTIONS
CORRECTIONS.pdf
1ST REVIEW -
NEW CITY TRANSMITTAL
DOC
7/20/201.5
KATHRYN SAMUELS
STRUCTURAL
BRES 2015-0257
0
TRANSMITTAL
(lst).pdf
Printed: Wednesday, July 29, 2015 2:46:36 PM 4 of 4 t �� SYSTEMS
L'
71Z,a
Bin #
1
C!of La Quinta
ty
Building &r Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Qtdnta, CA 92253 - (760) 777-7012
5'7 Building Permit Application and Tracking Sheet
Permit #
z C) F:-,
Project Address:
Owner's Name,
A. P. Number: —6277
Address:
Legal Description:
Contractor -�46�
City, ST, Zip:
Qv,
.. .... . ..... . . ...... ..... ... ...
Address:
Project Description -79
C T,
City. S Zip,.- uql7a�
Telephone: 6-1-77
. . ......
State Lie. # City Lia 9:
. . ....... .
Arch., Eng;., Designer
Address
444d .... ..... .. ..........
City., ST, Zip:....
. . ........
Telephone:ction
State Lic.
Occupancy:
Constru fype; V—e—�,
New n Alter Repair Dem
Project type (circle one): 0
Name of Contact Person:
Sq. FU 17 -PO
# Stories:'
Teleph o ne #.of C ontact Person:rto
. . ......
.1stimate Value ofP ect:
APPLICANT: DO.,NOT -WRITE BELOW THIS LINE
Submittal Req'd
Rec1d
TRACKING
PERMT FEES
Plan Sets
Check submitted
71(o
uem
....-Amoo.at
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposit
Truss Calcs.
Called Contact Person
Plan Check Balance.
Mile 24 Calts.
20
Plans picked up
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
21' Review, ready for corrections/issue
Electrical
Subconfactor List
"Hed Contact ]Person
Plumbing
Grant Deed
Plans picked. up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE-.-
Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit Issue
School Fees
AAA
Total Permit Fees
71Z,a
Date 7/29/15
No. 31878
Owner James Hudson
Address 54479 Riviera St.
City La Quinta Zip 92253
Tract #
Type Residential Addition
CERTIFICATE OF COMPLIANCE
Desert Sands Unified School District
47950 Dune Palms Road
La Quinta, CA 92253
(760) 771-8515
APN #
Jurisdiction
Permit #
No. of Units
v��O&DS
C�
4L' '`' �o
z o
BERMUDA DUNES
RANCHO MIRAGE d
INDIAN WELLS �r
�. PALM DESERT
LAQUINT
INDDIOy^�y
775031030
La Quinta
Lot # No. Street S.F. Lot # No. Street S.F.
Unit 1 54479 Riviera St 128 'Unit 6
Unit 2 Unit 7
Unit 3 Unit 8
Unit 4 Unit 9
Unit 5 Unit 10
Comments Exempt
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under
500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile
homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 128 S.F. or $0.00 have been paid for the property listed above and that .
building permits and/or Certificates of Occupancy.for this square footage in this proposed project may now be issued.
Fees Paid By Exempt/ Robert Edwards Check No.
Bank Name/Recipient of Certificate Telephone 760-777-8202
Funding Exempt
BY Dr. Gary Rutherford
Superintendent
Fee collected /exempted by Kelly Jones
Signature
NOTICE: Pursuant )6, Governnhent Code Section 66020(d)(1), this will serve to notify you that the 90 -day approval period in which you may protest the fees
or other payment idEntified above will begin to run from the date on which the building or installation permit for this project is issued, or from the date on
which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed seal
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
Payment Recd_ < $0.0r 71
t -1�,
' `Uver/Undbr°`
e f s
\:
NOTICE: Pursuant )6, Governnhent Code Section 66020(d)(1), this will serve to notify you that the 90 -day approval period in which you may protest the fees
or other payment idEntified above will begin to run from the date on which the building or installation permit for this project is issued, or from the date on
which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed seal
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
BUILDING ENERGY ANALYSIS REPORT
' 4
` •PROJECT:
Hudson Residence
f . 54-479 Riviera `
A
La Quinta, CA
d Project Designer•t.D
,t
..
cot,
f Report Prepared by:
Joan D. Hacker
Insu-form, Inc.
77810 Las Montanas Road, Suite 201
Palm Desert, Ca 9221:1
r
760-345-1352 ~
' CITY OF LA QUINTA
r
i BUILDING &SAFETY DEPT.
APPROVED
t FOR CONST
UCTIO
Job Number:
r.ATE T 2 B
F
Date:
7/1/2015
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
a This program developed by EnergySoft, LLC — www.energysoft.com.
Ener Pro 6.4 by Ener Soft User Number 2655. ID:
TABLE OF CONTENTS
Cover Page
Table of Contents
Form CF -1 R -PRF -01-E Certificate of Compliance
Form RMS -1 Residential Measures Summary
Form MF -1 R Mandatory Measures Summary
HVAC System Heating and Cooling Loads Summary
EnergyPro 6.4 by Energysoft Job Number. ID: User Number. 2655
P
1
2
3
12
13
17
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 1 of 9
GENERAL INFORMATION
01
Project Name Single Fam Detached
02
Calculation Description Title 24 Analysis _
03
Project Location 54-479 Riviera
04
City La Quinta
05
Standards Version Compliance 2014
06
Zip Code
07
Compliance Manager Version BEMCmpMgr 2013-3b1 (694)
08
Climate Zone CZ15
09
Software Version EnergyPro 6.4
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 45
12
Project Scope Addition and/or Alteration
13..
Number of Dwelling Units 1
14
Total Cond. Floor Area (FT2) 2974
15 ..
Number of Zones 2
16
Slab Area (FT2) 2974
17.
Number of Stories 1
18
Addition Cond. Floor Area 128
19
Natural Gas Available Yes
20
Addition Slab Area (FT2) 128
21
Glazing Percentage (%) 15.8%
COMPLIANCE RESULTS
01 Building Complies with Computer Performance
02 This building DOES NOT require HERS Verification
03 This building incorporates one or more Special Features shown below
This compliance analysis Is valid only for permit applications through December 31, 2014
ENERGY USE SUMMARY
04 05
06
07
08
Energy Use Standard
(kTDV/ft2-yr) Design
Proposed
Design
Compliance
Margin
Percent
Improvement
Space Heating 12.30
12.32
-0.02
-0.2%
Space Cooling 292.52
296.38
-3.86
-1.3%
IAQ Ventilation 0.00
0.00
0.00
0.0%
Water Heating 9.12
5.11
4.01
44.0%
Photovoltaic Offset ----
0.00
0.00
----
Compliance Energy Total 313.94
313.81
0.13
0.0%
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 2 of 9
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Cool roof
• Cathedral Ceiling
• Window overhangs and/or fins �r
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• — None --
Cooling System Verifications:
-.—None--
HVACNone --
HVAC Distribution System Verifications:
• — None -
Domestic Hot Water System Verifications:
• — None "
ENERGY DESIGN RATING
This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on-site renewable energy system.
Reference Energy Use :;•^ 'b _'EnergywDesign Rating Margin Percent Improvement
Total Energy (kTDV/f2-yr)' 355.87�'F 355 74 ",; 0.13 0:0%
' includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Project Name
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
Cooling Systems
Number of Water
Heating Systems
Single Fam Detached
'2974
1
6
2
0
1
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Daterrime: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
. Page 3of9
ZONE INFORMATION
01
02
03
04
05
06
07
08
01
02
03
1 12
13
04
05
06
Orientatio
n
07
Skylight
Area (ft2)
Zone Name
Zone Type
HVAC System Name
Roof
Reflectan
ce
Zone Floor Area
(ft2)
Avg. Ceiling
Height-
Water Heating System 1
Water Heating System 2
Existing Living
Conditioned
Living Zone1
Front
28.1
2846
10
DHW Sys 1
0
-
0.75
Addition
Conditioned
Living Zone1
128
10
DHW Sys 1
OPAQUE SURFACES
01
02
03
04
05
06
07
08
09
10
Name
Zone
Construction
Azimuth
Window and Door
Orientation Gross Area (ft) Area (ftZ)
Tilt
(deg)
Status
Verified
Existing
Condition
Front Wall
Existing Living
Default Wall 1978 to 1991
45
Front
2200
90
Existing
No
Left Wall
Existing Living
Default Wall 1978 to 1991
135
Left
1800
133.421
90
Existing
No
Rear Wall
Existing Living
Default Wall 1978 to 1991
225
Back
2200
200.138
90
Existing
No
Right Wall
Existing Living
Default Wall 1978 to 1991
315
Right
1800
107.984
90
Existing
No
Roof 2
Existing Living
Default Roof 1978 to Pres
2846
Existing
No
Front Wall 2
Addition
R-13 Wall1
45
Front
10
90
New
N/A
Left Wall 2
Addition
R-13 Wall1
135
Left
10
90
New
N/A
Rear Wall 2
Addition
R-13 Wallt
225
Back
10
90
New
N/A
Right Wall 2
Addition
R-13 Wall1
180
135
10
90
New
N/A
Roof 3
Addition
R-38 Roof Attic
100
New
N/A
OPAQUE SURFACES — Cathedral Ceilings
01
02
03
04
05
06
07
08
09
10
11
1 12
13
Name
Zone
Type
Orientatio
n
Area
(W)
Skylight
Area (ft2)
Roof Rise
(x in 12)
Roof
Pitch
Roof
Tilt(deg)
Roof
Reflectan
ce
Roof
Emmittan
ce
Framin
g
Factor
Statu
s
Verified
Existing
Condition
Roof
Addition
R-38 Roof Attic1
Front
28.1
28
0
0
0
0.3
0.75
0.07
New
N/A
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01 J
Page 4 of 9
ATTIC
01
02
03
04
05
06
07
08
09
Name
Construction
Roof Rise
Roof
Reflectance
Roof
Emittance
Radiant
Barrier
Cool Roof
Status
Verified
Existing.
Condition
Attic Existing Living
Attic Roof Cons Existing
0
0.1
0.85
No
No
Existing
No
Attic Addition
Attic Roof Cons Addition
0
0.3
0.75
Yes
Yes
New
No
WINDOWS
01
02
03
04
05
06
07
08
09
10
11
Name
Surface (Orientation -Azimuth)
Width(ft)
Height (ft)
Multiplie
r
Area (W)
U -factor
SHGC
Exterior Shading
Status
Verified
Existing
Condition
Window
Left Wall (Left -135)
8.0
2.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 2
Left Wall (Left -135)
8.0
2.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 3
Left Wall (Left -135)
8.0
2.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 4
Left Wall (Left -135)
8.0
6.8
0.982
53.4
0.71
0.73
Insect Screen (default)
Existing
No
Window 5
Left Wall (Left -135)
8.0
2.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 6
Left Wall (Left -135)
8.0
2.0
1
16.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 7
Rear Wall (Back -225)
16.0
6.8
0.981
106.7
0.71
0.73
Insect Screen (default)
Existing
No
Window 8
Rear Wall (Back -225)
8.0
6.8
0.982
53.4
0.71
0.73
Insect Screen (default)
Existing
No
Window 9
Rear Wall (Back -225)
6.0
6.8
0.98
40.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 10
Right Wall (Right -315)
8.0
4.0
1
32.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 11
Right Wall (Right -315)
8.0
4.0
1
32.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 12
Right Wall (Right -315)
6.0
6.8
0.98
40.0
0.71
0.73
Insect Screen (default)
Existing
No
Window 13
Right Wall (Right -315)
4.0
1.0
1
4.0
0.71
0.73
Insect Screen (default)
Existing
No
Skylight
Roof (Front -45)
1
28.0
0.34
0.20
New
N/A
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 5 of 9
OVERHANGS AND FINS
01
02
03
04
05
06
07
08
09
10
11
12 13
14
_
Overhang
Left Fin
Right Fin
Window
Depth
Dist Up
Left
Extent
Right
Extent
Flap Ht.
Depth
_
Top Up
DIstL
Bot Up
Depth
Top Up Dist R
Bot Up
Window
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 2
2
0.1
2.
2
0
0
0
0
0
0
0 0
0
Window 3
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 4
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 5
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 6
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 7
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 8
2
0.1'
2
2
0
01
0
0
0
0
0 0
0
Window 9
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 10
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 11
2
0.1
2
2
0
0
0
0
0
0
0 10
0
Window 12
2
0.1
2
2
0
0
0
0
0
0
0 0
0
Window 13
2
0.1
2
2
0
0
0
.0
0
0
0 0
0
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached
Calculation Description: Title 24 Analysis
Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 6 of 9
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
08
09
Name
Zone
Total Cavity
Winter Design
Edge Insul. R -value
Construction Name
Surface Type _
Construction Type _
Framing " _.
R -value
U -value
Assembly Layers
900
None
0.8
No
Existing
No
- Cavity/Frame: no insul. /2x4 Top Chrd
Addition
128
100
2x4 Top Chord of Roof Truss ® 24
0.8
No
- Roof Deck: Wood Siding/sheathing/decking
Attic Roof Cons Existing
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
- Roofing: Light Roof (Asphalt Shingle)
- Inside Finish: Gypsum Board
- Cavity/Frame: R-11 /2x4
- Exterior Finish: Wood
Default Wall 1978 to 1991
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C.
R11
0.103
Siding/sheathing/decking
- Inside Finish: Gypsum Board
Ceilings (below
- Cavity/Frame: R-9.1 /2x4
Default Roof 1978 to Pres
attic)
Wood Framed Ceiling
2x4 ® 16 in. O.C.
R 19
0.049
- Over Floor Joists: R-9.9 insul.
- Cavity/ Frame: no insul. /2x4 Top Chrd
2x4 Top Chord of Roof Truss @ 24
- Roof Deck: Wood Siding/sheathing/decking
Attic Roof Cons Addition
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
- Roofing. Light Roof (Asphalt Shingle)
- Inside Finish: Gypsum Board
- Cavity/Frame: R -13/2x4
- Exterior Finish: Wood
R-13 Wall1
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C.
R 13
0.095
Siding/sheathing/decking
- Inside Finish: Gypsum Board.
Ceilings (below
- Cavity/Frame: R-9.1 /2x4
R-38 Roof Attic
attic)
Wood Framed Ceiling
2x4 @ 24 in. O.C.
R 38
OA25
- Over Floor Joists: R-28.9 insul.
- Inside Finish: Gypsum Board
- Cavity/ Frame: R -38/2x4
- Roof Deck: Wood Siding/sheathing/decking
R-38 Roof Atticl
Cathedral Ceilings
Wood Framed Ceiling
2x4 ® 24 in. O.C.
R 38
0.036
- Roofing: Light Roof (Asphalt Shingle)
SLAB FLOORS
01
02
03
04
05
06
07
08
09
Name
Zone
Area (W)
Perimeter
(ft)
Edge Insul. R -value
Carpeted
Fraction
Heated
Status
Verified
Existing
Condition
Covered Slab
Existing Living
2846
900
None
0.8
No
Existing
No
Slab
Addition
128
100
None
0.8
No
I New
No
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694 Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Daterrime: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 7 of 9
BUILDING ENVELOPE - HERS VERIFICATION
01 02 03 04
Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage ACH @ 50 Pa
Not Required Not Required Not Required ---
WATER HEATING SYSTEMS
01
02
03
04
05
06
07
08
Name
System Type
Distribution Type
Water Heater
Number of
Heaters
Solar
Fraction
N
Status
Verified Existing
Condition
DHW Sys 1
DHW
Standard
DHW Heater 1
1
Annual
Altered
No
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Instantaneous
0.1
0.91 EF
165000-Btu/hr
0
0
WATER HEATING - HERS VERIFICATION
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation with
Manual Control
Recirculation with
Sensor Control
DHW Sys 1
n/a
n/a
n/a
n/a
n/a
n/a
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
07
08
09
Heating System
Cooling System
Distribution
Fan
Floor Area
Verified Existing
Name
System Type
Name Ducted
Name Ducted
System
System
Served
Status
Condition
Living Zone1
Other Heating and
Heating
Yes
Cooling
Yes
Air Distribution
HVAC Fan
2974
Existing
No
Cooling System
Component 1
Component 1
System 1
1
HVAC - HEATING SYSTEMS
01 02 03
Name Type Efficiency
Heating Component 1 CntrlFurnace - Fuel -fired central furnace 78 AFUE
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694 Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis
Input File Name: Hudson Exist Addition.xml
CF1 R -PRF -01
Page 8 of 9
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
04
05
` Efficiency -
07
Multi -speed
09
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10.42
12
No
No
N/A
Duct Leakage
system
Location
Location
Bypass Duct
Status
Condition
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
08
09
10
Insulation
Supply Duct
Return Duct
Verified Existing
HERS
Name -
Type
Duct Leakage
R -value
Location
Location
Bypass Duct
Status
Condition
Verification
Air Distribution
Ducts located in attic
Existing (not
8.0
Attic
Attic
None
Existing
No
N/A
System 1
specified)
IAO (Indoor Air Quality) FANS
01 02 03 04 05
Name IAO CFM IAQ Fan Type IAO Recovery Effectiveness(%) HERS Verification
SFam IAQVentRpt 0 Default 0 Not Required
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694 Report Generated at: 2015-07-0116:33:27
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached
Calculation Description: Title 24 Analysis
Calculation Date/Time: 16:31, Wed, Jul 01, 2015
Input File Name: Hudson Exist Addition.xml
CFI R -PRF -01
Page 9 of 9
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. I certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Joan D. Hacker`
Company:
Signature Date:
Insu-form, Inc.
7/1/2015
Address:
CEA/HERS Certification Identification (If applicable):
77810 Las Montanas Road, Suite 201
City/Stateraim Desert, Ca 92211
Phone: 760-345-1352
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the informatiogmvided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit appli tion.
Responsible Designer Name:
Responsible Designer Signature:
Gabriel Rios
Company:
Rios Designs
Date Signed:
07/01/201
Address:
License:
49-901 Cinnabar Lane
N/A
City/State/Zip:
Coachella, CA 92236
Phone:
(760) 485-7431
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0116:33:27
RESIDENTIAL MEASURES SUMMARY
RMS -1
Project Name
Hudson Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
7/1/2015
Project Address
54-479 Riviera La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
2974
Addition
128
# of Units
1
INSULATION
Construction Type
Area
Cavity ftp Special Features Status
Slab Unheated Slab -on -Grade
- no insulation Z846 Perim = 900' Existing
Wall Wood Framed
R11 7,559 Existing
Roof Wood Framed Attic
R 19 2,846 Existing
Demising Wood Framed
R 13 1 Existing
Wall Wood Framed
R 13 40 New
Roof Wood Framed Attic
R 38 100 Cool Roof New
Slab Unheated Slab -on -Grade
- no insulation 128 Perim = 100' New
FENESTRATION
Orientation Area(ft)
Total Area: 470Glazin Percentage: 15.8 % New/Altered Average U -Factor: 0.34
U -Fac SHGC Overhang Sidefins Exterior Shades Status
Left (SE) 133.4
a 710 0.73 2.0 none Bug Screen Existing
Rear (SW) 200.1
0.710 0.73 2.0 none Bug Screen Existing
Right (NW) 108.0
0.710 0.73 2.0 none Bug Screen Existing
Skylight 28.0
0.340 a20 none none None New
HVAC SYSTEMS
Qty. Heating
Min. Eff Cooling Min. Eff Thermostat Status
1 Central Furnace
78% AFUE Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION Duct
Location Heating Cooling Duct Location R -Value Status
Living Zone Ducted
Ducted Attic 8.0 Existing
WATER HEATING
Qty. Type
Gallons Min. Eff Distribution Status
1 Small Instantaneous Gas
0 0.91 Standard Altered
Ener Pro 6.4 by Ener Sok User Number. 2655 RunCode: 2015-07-01 T16:36:25 ID: Pae 12 of 17
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
compliance approach used. Exceptions may apply. Review the respective code section for more information.
Building Envelope Measures:
§ 110.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§ 110.6(a)5:
Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of § 10-111 (a).
§ 110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§ 110.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CFIR.
§ 110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFI R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a
§ 150.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§ I50.0(b):
Loose fill insulation shall conform with manufacturer's installed design labeled R -value.
§ 150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U -
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U -factor.
§150.0(g)l:
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
walls, vented attics and unvented attics with air -permeable insulation.
§150.0(g)2:
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of
§150.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§ 150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8
150.0
§ (q)'
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted average U -factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§ 150.0(e)I A:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§ 150.0(e)1 B:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible operable, and fight -fitting damper or a combustion -air control device.
§ 150.0(e)l C:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§ 150.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§ 110.0-§ 110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§ 110.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of §110.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type- central furnaces, household cooking appliances (appli-
§ 110.5:
ances without an electrical, supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§150.0(h)l:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in § 150.0(h)2.
§ 150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c).
§ 150.06)1 A:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§ 150.00)1 B:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§150.00)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.06)2B:
All domestic hot water pipes that are buried below grade must be installed in a waterproof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§ 150.00)2C:
Pipe for cooling system lines shall be insulated as specified in § 150.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
§150.00)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§150.00)3B:
or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of.the water heater, a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)l:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§150.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5.
§150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§ 150.0(m)l:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than % inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross-sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling.
§ I50.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§ 150.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§150:0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§150.0(m)]0:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§ 150.0(m)11:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
150.0 m 12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§150.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy:5 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§ I50.0(m)15:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of>_ 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of:5 0.58 W/CFM as confirmed by field verification and diagnostic
testing,in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§ 150.0(0):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§ 150.0(0)] A:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on-off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
2013 Low -Rise Residential Mandatory Measures Summary
§ 110.4(b)l :
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§ 110.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§ 110.4(b)3:
Pools shall have directional inlets that adequately mix the pool.water, and a time switch that will allow all pumps to be set or pro-
grammed to run only during off-peak electric demand periods.
§ 110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§ 150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§ 110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9.
§ 150.0(k)IA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with § 150.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§ 150.0(k)1B:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§ 150.0(k)IC:
§ I30.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§ 150.0(k)1D:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§ 150.0(k)IE:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § I30.0(c). Night lights do not need to
be controlled by vacancy sensors.
§150.0(k)1F:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of § 150.0(k).
§150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§150.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§ 150.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§ I50.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with § 150.0(k).
§ 150.0(k)2F:
Lighting controls comply with applicable requirements of § 110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if. it functions as a dimmer
§ 150.0(k)2G:
according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5; and all other
requirements in § 150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of §I50.0(k) if: it
§ 150.0(k)2H:
functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements
of § 130.5; and all other requirements in § 150.0(k)2.
§ 150.0(k)2I:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in §150.0 2.
§ 150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§150.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§ 150.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § I50.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ 150.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summary
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with § 110.9; meets the Installation Certification requirements in § 130.4; meets the
requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§150.0(k)9B:
following requirements:
i. Shall comply with § 150.0(k)9A; or
ii. Shall comply with the applicable requirements in 110.9, 130.0, 130.2, 130.4, 140.7 and 141.0.
§ 150.0(k)9C:
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in 110.9 130.0 130.2 130.4 140.7 and 141.0.
§ I50.0(k)9D:
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in § 110.9 130.0 § 130.2 § 130.4 § 140.7 and 141.0.
§150.0(k)10:
Internally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined
according to § 130.0(c).
§ I50.0(k)l 1:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
nonresidential garages in § 110.9 § 130.0 130.1 § 130.4 § 140.6 and § 141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§ 150.0(k)12A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§150.0(k)12B:
i. Comply with the applicable requirements in §110.9, §130.0,.§130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§1 10.10(a)l:
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of § 110.10 b through § 110.10 e .
§ 110.10(a)2:
Low-rise multi -family buildings shall comply with therequirements of § 110.10 b through § 110.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§1 10.10(b)l:
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§ 110.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone measured in the vertical plane.
§ 110.10(b)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ 110.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§ 110.10(e)1:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§ 110.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
Hudson Residence
Date
7/1/2015
System Name
Living Zone
Floor Area
2,974
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
1
COIL COOLING PEAK
CFM Sensible
Total Room Loads 5,841 69,107
Return Vented Lighting 0
Return Air Ducts 3,989
Return Fan 0
Ventilation 0 0
Supply Fan 0
Supply Air Ducts 3,989
TOTAL SYSTEM LOAD 77,086
COIL HTG.
Latent CFM
2,939 3,478
0 0
2,939
PEAK
Heating System
Sensible
Output per System 70,000
95,414
Total Output Btuh 70,000
Output Btuh/ ft 23.5
4,689
Cooling System
0
Output per System 58,000
0
Total Output Btuh 58,000
0
Total Output ons 4.8
4,689
Total Output Btuh/s ft 19.5
Total Output s ft/Ton 615.3
104,792
Air System
CFM per System
2,210
HVAC EQUIPMENT SELECTION
Airflow cfm
2,210
Existing 34,127
21,183
70,000
Airflow cfm/s ft
0.74
Airflow cfmfl-on
457.2
Total Adjusted System Output 34,127
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK
21,183 1 70,000
Aug 3 PM Jan 1 AM
Outside Air % 0.0%
Outside Air cfm/s ft 0.00
Note: values above given at ARI conditions I
HEATING SYSTEM PSYCHROMETRICS
Airstream Temperatures at Time of Heating Peak
26 OF 68 OF
Outside Air
0 cfm Supply Fan
2,210 cfm
68 OF
68 OF 98 OF
Heating Coil
96 OF
ROOM
70 OF
COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak
112/78 OF 80!69°F
Outside Air
0 cfm AL
80 169 OF
80/69°F 65/64°F
Supply Fan Cooling Coil
2,210 cfm
63.0%
�A 4
67 / 65 OF
;
' ROOM
78 ! 69 OF
Energ Pro 6.4 by Energ Soft User Number: 2655 RunCode: 2015-07-01716:36:25 ID:
Page 17of 17
29
Bronwyn Horton
Gas Mileage
6/29/15
0
6/30/15
0
7/1/15
0
7/2/15
29
7/3/15
0
29
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 17:41, Wed,'Jul 01, 2015
Calculation Description: Title 24 Analysis Input File Name: Moore Existing Addition.xml
CF1 R -PRF -01
Page 9 of 9
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Joan D. Hacker
Company:
Signature Date:
Insu-form, Inc.
7/1/2015
Address:
CEA/HERS Certification Identification (If applicable):
77810 Las Montanas Road, Suite 201
City/StateQarm Desert, Ca 92211
F'
Phone:
760-345-1352
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3.- The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
Gabriel Rios
Company:
Date Signed:
Rios Designs
07/01/2015
Address:
.License:
49-901 Cinnabar Lane
N/A
City/State/Zip: Coachella, CA 92236
Phone: (760) 485-7431
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694 Report Generated at: 2015-07-0117:42:53
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Single Fam Detached Calculation Date/Time: 17:41, Wed, Jul 01, 2015
Calculation Description: Title 24 Analysis Input File Name: Moore Existing Addition.xml
CF1 R -PRF -01
Page 9of9
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Joan D. Hacker
Company:
Signature Date:
Insu-form, Inca
7/1/2015
Address:
CEA/HERS Certification Identification (If applicable):
77810 Las Montanan Road, Suite 201
..
City/StatePalm Desert, Ca 92211
Phone: 760-345-1352
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
Gabriel Rios
Company:
Date Signed:
Rios Designs
07/01/2015
Address:
License:
49-901 Cinnabar Lane
N/A
City/State/Zip: Coachella, CA 92236
Phone:.,.(760) 485-7431
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-01152015-694
HERS Provider:
Report Generated at: 2015-07-0117:42:53