12-0112 (MECH)P.O. BOX 1504
78-495 CALLE TAMPICO .
LA QUINTA, CALIFORNIA 92253
Application Number:
Property Address:
APN:
Application description
Property Zoning:
Application valuation:
X12=0000"0f 2`�
5'544-9'RIVIERA
775 -153 -002 -
MECHANICAL
LOW DENSITY RESIDENTIAL
16000
Architect or
a(a
T -41y . 4 40" -
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
---------------------------------------------------
LICENSED CONTRACTOR'S DECLARATION .
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter,9 (commencing with
Section 7000) of Division 3 of the Bus' ss anj Professionals Code, and my License is in full force and effect.
License las : C20 License :489046
/ate: Z tractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: .
.. 1 _ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon, .
and who does the work himself or herself through his or her own employees, provided that the
improvements are not.intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
1 _ 1 I, as owner of the property; am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
. property' who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.)..
I am exempt under Sec. ,.BAP.C. for this reason
Date: Owner:
CONSTRUCTION LENDING AGENCY -
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERMIT
Owner:
BAUDER BRANSTON W
55449 RIVIERA
LA QUINTA
LA QUINTA, CA 92253
Contractor:
ESSER AIR CONDITIONING& HTG
P.O. BOX 1636 .
CATHEDRAL CITY, CA 92235
(760)324-0550
Lic. No.: 489046
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 2/07/12
-----------------------------------------------
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier MAINTSTAY BUSNS Policy Number MBS-SIP0051611
1 certify that, in the performance of the work for which this permit,is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I shout ome s bject to the workers' compensation provisions of Section
3700 of the Labor e, I sh II fo ith comply with those provision .
ate: Z plicant:-
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS 1$100,0001. IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void'if work is not commenced
within 180 days from date of issuance, of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county ordinances and state laws relating to building con ction, and hereby authorize representatives
of this co ty to enter upon the above-mentioned pr erty ford ection purposes.
Date: 1 '� S,Ibnature (Applicant or Age
Application Number 12-00000112
Permit . : . MECHANICAL
Additional desc .
Permit Fee 66.00 Plan Check Fee
16.50 .
Issue Date . . . . Valuation
0
Expiration Date 8/05/12.
Qty .Unit Charge Per
Extension
BASE FEE
15.00
2:00 9.0000 EA MECH'FURNACE <=100K
18.00
2:00 1G:5000 I.;' MECII. D/C >3 15iir/.,100I:-500IGDTU
33.00
Special Notes and Comments
REPLACE (2) HVAC SYSTEMS WITH3 TON 16
SEER SYSTEMS.AT GROUND LEVEL. 2010
CODES.
----------------------------------------------------------------------------
: Other Fees . . . BLDG STDS ADMIN= (SB14"73)
1.00
Fee summary* Charged Paid Credited
Due
Permit Fee Total 66.00 .00 .00
66.00
Plan Check Total 16.50 .00 :00
16.50
Other Fee Total 1.00 .00 .00
1.00
Grand Total -. . 83.50 00 .00
83.50
LQPERMIT
- ..
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations age 1 of 5
Project Name: Climate Zone # # of Stories
Bauder,Brandt 2 15 1
General Information
Site Address: 55449 Riviera La Quinta CA 92253
Enforcement Agency: La Quinta, City of
Date: 1!612012
Building Type ❑. Single Family ❑ Multi Family
Circle the Front Orientation: l$, E, S, W, or degrees
Conditioned Floor Area (CFA): 1200
Project Type: ❑r Alterations ❑ Envelope ❑ Fenestration ❑ Roof ❑ HVAC
JA4
AssemblyAssembly
Replacement or Change Out ❑ Duct Replacement ❑ Water Heater
NOTE. This form is not to be used for Newly Constructed Buildings or Additions
Insulation Values For Opaque Surfaces (for Furring use the Mass and Furring Strips Construction table below)
Assembly Alteration
❑ Opening of framed cavity alone— Alterations that involve the opening of the framed cavity of a wall, ceiling, or floor must install the
mandatory minimum insulation value per §150 for the altered assembly. Fill in Columns A —C and enter mandatory Insulation value in Column H.
❑ Replacement of entire assembly— Replacement of an entire wall, ceiling, or floor assembly requires the installa-ion of Component
Package- D insulation values in Table 151-C. Fill in Columns A —J.
Opaque Surface Details For the furred portioned of Mass Walls see Furring Strips Construction Table below.
A B I C D E F G I H I I J
Proposed see Note Standard Values From J.4.4
Table
M
Assembly Name'
Framing Thickness,,
S cng,Ta� -
Matenffla7JA4 Tbl"
Framed
avInsalafio
JA4
AssemblyAssembly
Proposed
ID
orT --
Num r
Otei
`RvaluRVaue
stQand'Szee
Cell Value
+
1Ift it A 6 lirr *% eia
—U-facto?
Assembly
m a
� � �
o o [= F$ ;,
o.
A > ;,
<� o
=in
Mass
Name or
JA4 Table 3 y
m d
ai E o
o
Note: For fra red assemblies, accounting for Continuous InsUbtion R -value, see Rake-JA4-3 and Equation14-1. For"calculating furred walls use the Mass and
Furring Construction table below
I: For Tag/ID indicate'the ideennt fication nine thatlmatches the building plans ��,, �j'
k, tFrame,type
2. Indicate the Assembly Name or type: Ro of/Ceili and Size. For
G,Wdlls, Floors, Slabs„Crawl S r"ce Do and IndicaT�t
Wood, Metal, Meta[ Buildings, Mass, enter 2x4;ti2x6, or etc see JA4 for other possible frame typesassem'bhes,�..*�
3. Enter the thickness for mass in inches or Spacing between fr� ming members enter; '6"or 24"OC; o therrfo other assembly description
such as Concrete Sandwich Panel, Spandrel Panel, Logs, Straw Bale Panel and etc....
4. Based on the Climate Zone; enter the Standard U factor from-Tablel151-B, C or D for each diereNtassembly-AQme-or-type.
5. Enter the Table number that closely resembles the proposed assembly.
6. Enter the R -value that is being installed in the wall cavity or between the framing; otherwise, enter "0 ".
7. Enter the Continuous Insulation R -value for the proposed assembly; otherwise, enter "0 ".
8. Enter the row and column of the U factor value based on Column F Table Number and enter the Assembly U factor in Column J
9. The Proposed Assembly U factor, Column J, must be equal to or less than the Standard U factor in Column E to comply.
Furring Strips Construction Table for Mass Walls Onl
A I B I C 7D I E
F I G I H I J I K
L
M
Proposed Properties of Masonry and Concrete
Added Interior or Exterior Insulation
Walls From Reference
in Furring Space from Reference
Joint A ppendix Table 435, 43.6 43.7
Joint Appendix Table 43.13
Assembly
m a
� � �
o o [= F$ ;,
o.
A > ;,
<� o
=in
Mass
Name or
JA4 Table 3 y
m d
ai E o
o
_ m
Assembly
Thickness'
Type2
Number' ¢ >
� '
¢ > LU ce�
U-=actorb�I
Comment
Registration Number: '312-A0010024A-000000000-0000 Registration Date/Time: 01/06/2012 07:40:40 HERSP ..ider: CBPCA
2008 Residential Compliance Forms August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations age 2 of 5
Project Name: Climate Zone # # of Stories
Bauder,Brandt 2 115 1
Mass and FurringStrips Construction ootnotes
1. Indicate the type of assembly to include; Hollow Unit Masonry Walls, Solid Unit Masonry, Solid Concrete Walls, E'c. Additional assemblies can
befound Reference Joint Appendix JA4.
2. This is the U -Factor based on the thickness of the assembly in inches.
3. The R -value of the insulation to be added on the interior or exterior of the assembly.
4. The Calculated R- Value is the R -value of the furred out section of the assembly.
-6. The Final Assembly is calculated using Equation 4-2 or Equation 4-4of the Reference Joint Appendix JA4. The equation is the inverse of Column
added to Column 1. Column K is the inverse from column J.
7. Insert the calculated U- actor value on to the Opaque Surface Details in Column J
FENESTRATION PROPOSED AREAS
❑ Replacing window alone — Replacement windows shall meet the U Factor and SHGC Value requirements ofComponent Package D in
Table 151-C The Total Fenestration and West facing Area requirements are not applicable.
❑ Adding 50ft2 or less of window area — Newly installed windows shall meet the U -Factor and SHGC Value requirements of Component
Package D in Table 151-C.
❑ Adding more than SOW of window area Newly installed windows shall meet the U -Factor and SHGC Nalue and the Fenestration
Area requirements of Component Package D in Table 151-C. Complete the Altered Fenestration Allowed Area Table on Page 2 of the CF -IR -ALT
7 - O entation a-,
x'1101 It' h '44 n Ali '
Fenestration hype and`rame (1Vorth,E.,lrgpsedArea� 1VIax>tn NFRC or Default
(Window, Glass.DoororS li t #� wSouth, West �4## fi ;U-factorz'; SHGC; �4 Value'
1 IU - �.
1. Fenestration area is the area of total glazed product''(i. e. glass plus fra`rrie). Exception.'NWhen a door' s less. thant;O% glass, the fenestration
area may be the glass area plus a "2 inch frame'Aaround the glass.
2. Enter value from Component Package D Requirements Table 1514C —
3. Actual fenestration products installed and as indicated in CF -6R -ENV Form shall be equivalent too have a 1U factor and/or a lower
SHGC value than that specified on the CF- I R ALT Form. l 1 .
4. Submit a completed WS -3R Form if a reduced SHGC is calculated with exterior shading.
5.1 a licable at this stage enter "NFRC" or NFRC Certified windows or are CEC "Default" valuesfound in TabL6 116-A or B.
ALTERED FENESTRATION ALLOWED AREAS
(Complete if more than SOfrz
offenestration is added,
A
B
C
D
E
F
G
Allowed
Existing
Fenestration
Total Area
<
CFA of Entire
% of
Fenestration
Area
Fenestration
Allowed
Proposed Areal
DwellingCFA
Area
Removed
Area Added
A x B
Total Fenestration Area
(ft)
.20
>
West Fenestration Area
'
(Required In
.05
>
CZ's 2,4&7-15)
1. West Fenestration Area includes west -sloping skylights and any skylights with a pitch less than 1:12.
2. West facing glazing area removed cannot be "counted" twice. " In order to distribute the west glazing area rem07ed to the other orientations,
-input the west glazing area removed in the Total Fenestration Area row, column D.
3. Include the Proposed Area of the West facing fenestration in both Area columns below.
4. To meet compliance, the Proposed Area must be less than ore equal to the Total Allowed Area or BOTH the Total and West Fenestration Areas.
Registration Number: 312-A0010024A-000000000-0000 Registration Date/Time: 01/06/201207:40:40 HERSProvider: CBPCA
2008 Residential Compliance Forms August 2009
f
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations age 3 of 5
Project Name: Climate Zone # # of Stories
Bauder,Brandt 2 115 1
ROOFING PRODUCTS (COOL ROOFS) §151(1)12 -
When the area of exterior roof surface to be replaced exceeds more than 50% of the existing roof area; or more than 1,000 , whichever is
less, the new roofing area must meet the roofing product "Cool Roof" requirements of §152(b)1Hi, 152(b)1Hii, or 152(b)1Hiii.
Check applicable alternative or exception below if the roof alteration is exempt from the roofing product "Cool Roof' requirements. Note: If any
one of the alternatives or exception below is checked, the Aged Solar Reflectance and Thermal Emittance requirements for roofing products in
§118(1) are not applicable.'Do not fill table below.
❑ Cool Roofs Not Required in Climate Zones 1-12, 14, and 16 with a Low Sloped. Less or 2:12 pitch.
❑Cool Roofs Not Required in Climate Zones t through 9 and 16 with a Steep -Sloped Roofs (pitch greater than 2:12) and product unit weight less
than 5lb/ft2.
Alternatives to §152(b)1Hi and §152(b)Hii, Steep -slope roof (pitch > 1:12)
❑ Insulation with a thermal resistance of at least 0.85 hr•fiz•°F/Btu or at least a 3/4 inch air -space is added to the roof deck
over an attic; or
❑ Existing ducts in the attic are insulated and sealed according to §15l(f)10; or
❑ In climate zones 10, 12 and 13, with 1 ftz of free ventilation area of attic ventilation for every 150 ft of attic floor area, and
where at least 30 percent of the free ventilation area is within 2 feet vertical distance of the roof ridge; or
❑ Building has at least R-30 ceiling insulation; or
❑ Building has radiant barrier -in the attic meeting the uhSments of § 15l(f)2Perform-mce
❑ Building has no dduu, �
-,ac•, o ii; , + ,1- il
t§e
❑ In climate zones 10, 11;;13-and.14, R-3 or greater roof deck insulation a0k vented attic. �;
Exception to §152(b)1Hiii, Low -slope roof (pitch :5 2�
❑ Building has no ductsin�the attic. -
Other Exceptions` _
❑ Roofing
area co tiered by,&ilding4riteg�rated; photovoltaic panels and olar thermal panels.are exempt from the below Cool Roof criteria.
❑ Roof constructions that have•thermal mass over the roof membrane with atJeast 25 Ib/fie is Am rAbin the -below Cool Roof criteria.
Note: If no CRRC-1 Mbel is available 2,ttiiscompliance mte`thod cannot be used, use the Performance Approach to show compliance, otherwise,
_
Check the applicable box -below if Exempt fromtlthe Roofin Products "Cool Roof" Requirement -__A_._/__1
j Roof Slope
Product Weigh
Productged-Solaar
Z�'Re�flectance3'41-
Thermal
CRRC Product ID Number _<_ 2.12`►>__2:12J
< 519/ft,—>51 lilfi�
�T
Emittance
SRI5
°
❑
I
[JI
❑
❑
❑
❑
o
❑
❑4
❑
❑
❑
❑
❑4
❑
❑
❑
❑
❑4
❑
❑
❑
❑
❑4
I. The CRRC Product ID Number can be obtained from the Cool Roof Rating Council's Rated Product Directory at wwsv.coolroofs.orQ/products/search.php
2. Indicate the type of product is being used for the roof top, i.e. single ply roof, asphalt roof, metal roof, etc.
If the Aged Reflectance is not available in the Cool Roof Rating Council's Rated Product Directory then use the Initial Reflectance value from the same
directory and use the equation (0.2+0.7(pi„itiat - 0.2) to obtain a calculated aged value. Where p is the Initial Solar Reflectance.
4. Check box if the Aged Reflectance is a calculated value using the equation above.
5. Calculate the SRI value by using the SRI- Worksheet at htto:lAvww.enerQy.ca.eov/title24/and enter the resulting value in the SRI Column above and attach acopy of
the SRI- Worksheet to the CF -I R.
To apply Liquid Field Applied Coatings, the coating must be applied across the entire roof surface and meet the dry mil thickness or coverage
recommended by the coatings manufacturer and meet minimum performance requirements listed in § 118(i)4. Select the applicable coating:
❑ Aluminum -Pigmented Asphalt Roof Coating
TO Cement -Based Roof Coating
113 Other
Registration Number: 312-A0010024A-000000000-0000 Registration Date/Time: 01/06/201207:40:40 HERSProvider: CBPCA
2008 Residential Compliance Forms August 2009
r
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations age 4 of 5
Project Name: Climate Zone # # of Stories
Bauder,Brandt 2 115 1
HVAC SYSTEMS - HEATING
List water heaters and boilersfor bothh domestic
ho{t water. (DHW) heaters and hydronic�space heating. Individual dwelli;VHW heaters must be
Minimum Duct or Piping
Configuration
Heating Equipment
Efficiency Distribution Insulation
Thermostat (Central, Split,
Type and Capacity'"
(AFUE or HSPF) Type and Location R -Value
Type Space, Package or H dronic
Furnace, 60000
80 AFUE Ducted,
SetBack Split
Distribution
Numier'In
1. Indicate Heating Type (Central Furnace, Wall Furnace, Heat pump, Boiler, Electric Resistance, etc)
2. Electric resistance heating is allowed only in Component Package C, or except where electric heating is supplemental (i.e., if total capacity
< 2 KW or 7,000 Btu/hr electric heating is controlled by a time -limiting device not exceeding 30 minutes). See §151(b)3 exception.
3. Refer to the HERS Verification section on Page 4 of the CF -I R -ALT Form for additional requirements and check applicable boxes.
4. Indicate Type or Location (Ducts, Hydronic in Floor, Radiators, etc)
HVAC SYSTEMS - COOLING
Thermal-Eficienc
s)T
R -Value
Minimum
Efficiency Duct or Piping
Configuration
Cooling Equipment
(SEER/EER or Distribution Insulation Thermostat
(Central, Split,
Type and Capacity' .2
COP) Type and Location; R -Value Type
Space, Package or H dronic)
AirConditioner, 36000 ..
16 SEER , Ducted;„ O SetBack
Split
tib►'anito
irala i - iiin ia®m[, ® uu L ®!! lei
e
1. Indicate Cooling Type -(AIC Heat pump, Evap Cooling etc) �+r■
i M ' Oft
2. Refer to the HERS�Verificatioonn section�on Page 9 0fsthe,G7F'' I R ArL�T�For.m for,1ddi1,1Lnal regtttr�e JnQ.p;n check applicable boxes.
3. Indicate Type or Location Duc H dronic in Floor, Radiators, etc.
1 1 9 W `# V `r,0001- -N�l
WATER HEATIN0,,, -/--"-71 -" ', ,rt\ a r --"*1
List water heaters and boilersfor bothh domestic
ho{t water. (DHW) heaters and hydronic�space heating. Individual dwelli;VHW heaters must be
gas or propane fired, and may_not-exceed 5�0
Ballo Hol water pipe insulation from thDHW hyeaterlo the kitchens) and on all underground
'�.�i '
hot water pipes is required in all com onent
acka es -m all climate zones ,.. • 1
Heater Type/Fuel
�
`T
�
External Tank
Distribution
Numier'In
ndfor or
InsulationWater
ci
(Standard, Rerculpatin
S stem
C aci (g)
Thermal-Eficienc
s)T
R -Value
1. Indicate Type (Storage Gas, Heat Pump, Instantaneous, etc.)
2. Recirculating systems serving multiple dwelling units shall meet the recirculation requirements of §150(n). The Prescriptive requirements do
not allow the installation of a recirculating water heating system for single dwelling units.
3. The external water heating tank and i es shall be insulated to meet the requirements o 150 ' .
SPECIAL FEATURES The enforcement agency should pay special attention to the Special Features specified in this checklist below.
These items may require written justi ication and documentation and special verification.
NEW ROOF ASSEMBLY - Radiant Barrier
The radiant barrier requirement of § 151 2 does not apply to roof alterations.
Slab Edge (Perimeter) Insulation ❑ YES ONO
YES: In Climate Zone 16 in Component Packages D, R-7 insulation is required.
Heated Slab Insulation 13 YES ONO
YES: Slab edge insulation required for all heated slabs in all Climate Zones. See details in Table 118-A of the standards.
Raised Slab Insulation O YES 0 NO
YES: In Climate Zones 1, 2, 11, 13, 14 & 16, R-8 insulation is required; in Climate Zones 12 & 15, R-4 is required under component Package D.
Thermal Mass
To obtain Compliance Credit for the installation of thermal mass, use the Performance Approach.
L
Registration Number: 312-AO010024A-000000000-0000 Registration Date/Time: 01/06/201207:40:40 HERS Provider: CBPCA
2008 Residential Compliance Forms August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations age 5 of 5
Project Name: Climate Zone # # of Stories
Bauder,Brandt 2 115 1
HERS VERIFICATION SUMMARY The enforcement agency should pay special attention to the HERS Measures specified in this
checklist below. A completed and signed CF -41? Form for all the measures specified shall be submitted to the building inspector before final
inspection.
Duct Sealing & Testing HERS verification is required for this measure.
0 YES ❑ NO YES: In Climate Zones 2 and 9-16, if more than 40 linear feet of new or replacement ducts areinstalled in unconditioned
space, the ducts are to be sealed per §152(b)1Dii and the newly installed ducts are to be 6sulated per §151(f)10.
❑ EXCEPTION: Existing duct systems that are extended, which are constructed, insulted or sealed with asbestos.
❑ YES 0 NO YES: In Climate Zones 2 and 9-16, if the existing space -conditioning system (HVAC equipmert and ducting) is replaced, the
ducts are to be sealed per §I52(b)IDi.
❑ YES ❑ NO YES: In Climate Zones 2 and 9-16, if the existing HVAC equipment is replaced (including the replacement of the air handler,
- outdoor condensing unit of a split system, cooling or heating coil, or the furnace heat exckanger) the ducts are to be
sealed per § 152(b)1 E.
❑ EXCEPTION: Duct systems that are documented to have been previously sealed con:5rmed through HERS
verification in accordance with procedures in the Reference Residential Appendix RA3.
❑ EXCEPTION: Duct systems with less than 40 linear feet in unconditioned space.
❑ EXCEPTION: Existing ducts stems constructed, insulated or sealed with asbestos.
Refrigerant Charge -Split System HERS verification is required for this measure.
0 YES M NO ES: Ina lunate Zones;2 and 8-1.5, whe the -existing HVACc- equipment is replaced mcluding7the replacement of the air
, han ler oiitdo�r condensinWWIg rt od a splWt sy�st m A/aC—or ikff,r p p coo�mg or')ryea�ti�giw�il, or the furnace heat
_exchaner a refrigerant charge measurement shill"be verified per ,152(b)1F.
Central Fan Integrated (CFn VVe0 tilationLS .. and l a.r ?UaNDr.Eaw , i m
The ventilation uirements of §150 0 .do,nota 1 to existing residential homes.
Ducted Split Systems - Air Conditioners and Heat Pumps: Airflow HERS ver fcatronvs required for tris measure.
0 YES 13 NO YES: In Climate -Zones 10 through 15, when the existing space -conditioning syst"e"m (HVAC ecpipment and ducting) is
re laced, the aiMow and fan watt draw shall!be verified per § 152(b)1016 mmeet,the'i ucements of § 151(f)7B.
Documentation Author's Declaration Statem net .®► 7 *11_� / —. t
• I certify that this Certificate of Com 6ance''documentation is accurate anTcom tete. APO'
Name: Tim Esser
Signature. Tim Esser
Company: Esser Air Conditining
Date -116/2012 V -
Address: 36665 bankside Dr,Drive OFC,OFFICE
If Applicable ❑CEA or ❑CEPE
(Certification #):
City/State/Zip: Cathedral City California 92234
Phone: 760-324-0550
Responsible Building Designer's Declaration Statement
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the building design identified on
'this Certificate of Compliance.
• I certify that the energy features and performance specifications for the building design identified on this Certificate of Compliance conform
to the requirements of Title 24, Parts 1 and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information provided to document this
building design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Name: Tim Esser
Signature. Tim Esser
Company: p y• Esser Air Conditining
Date: 1/6/2012
Address: 36665 bankside Dr,Drive OFC,OFFICE
License. 489046 '
City/State/Zip:
Cathedral City California 92234
Phone:
760-324-0550
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at. 1-800-772-zs300.
Registration Number: 312-AO010024A-000000000-0000 Registration Date/Time: 01/06/2012 07:40:40 HERSprc•vider: CBPCA
2008 Residential Compliance Forms August 2009
If'sr'esc� c�pfnve Certi4icatt- of Conepleanee: ResideonaV'
Residential �Iltcrat�otas Ck-PR-ALT
Project 1Vame:" a e 1'.'of =
{G Batider,Braridt Climate Zone k
' 15 # ofStories
General Information
Site Address: 55449 Riviera La•Quinta CA 92253 Enforcement Agency: La Quints, City of 1/6/2012
Date:
Building Type p Single Family 0 -Multi Family , Circle the Front Orientation:
®, E, S, W, or degrees . • .... , ' _: -
Conditioned Floor -Area (CFA): 1200 ProjectType: ❑Alterations ❑Envelope Fencstration ❑Roof ❑HVAC
Replacement or Change Out ❑ Duct Replacement ❑ Water Heater ;
NOTE: This form is not to be used forNervly Constructed Buildings or AdAdons
Insulation Values For Opaque'SYrrfaces (for Furring use the Mass and Furring Strips Construction table belowi
Assembly Alteration
❑Opening of framed cavity alone— Alterations that involve the opening of the framed cavity ofa wall, ceiling,: or, floor must install the
- ❑mandatory minimum insulation value per ,¢150 for the'altered assembly. Fill in Columns A -C and enter mandatory insulation value in Column H.
Replacement�of entire assembly— Replacement of an entire wall, ceiling, or floor assembly requires the instcllation of Component
Packs e- D insulation values in Table 151-C Fill in Columns A —J
-Opaque Surface Details For the furred rtioned of Mass Walls see Furring St ' s ConstruMion Table below.
A g C D E F . H I.
• _ Pro ed "`` J
Standard Values From JA4 Table
Tag/ Assemb , FramingcknesVfl� r Framed Continvous JA4 Prosed.
ID1 or.T ' (� Assembly Assembl
um fit' Cell Value' U -facto
f_- •�
_ �g gid"
Note: Forfurred ass byres" Dunn, H>�
iruvresJ`ung.irored walls use the Mass and
Fwrirt Construction 7e
1. For Tag/ID indicaIe;AY_"idenli tca n
2. lndieate the Assembly Name or R Ceh
!s -
'Pe *7nrs $lu s,�awl Space Doors Fete . iicatetheFrane and Size: For
T Woad Metal, Metal Buildings, Mass, e rIR4 ° s •or 1e -sQe J' for other `�s ble,�r
3. Enter the thickness for mass in inches or ' en*' r ' x ' ,i n
P� 8 en kg- e e J enter; res?'th¢r ' or all Ther , _ embly description
such as Concrete Sandwich Panel, Spandrel Panel, Logs, SlPanel and etc.... <
4. Based on the Climate Zone; enter the Standard U factor fro able 1514, C or D for each different
5. Ewer the Table number that closely resembles the proposed assembly.
6. Enter the R -value that is being installed in the wall cavity or between the framing; otherwise; enter "0
7. Enter the Continuous Insulation R -value jor the proposed assembly;. otherwise, enter "0»
8. Enter the row and Column of the Ufactor value based on Column F Table Number and enter the Assembly Ufaetor in' Column J
9. The Proposed Assembly U factor, Column J, must be equal to or less than the Standard U factor in Column E to comply. '
Furrin Stri s Construction Table for Mass Walls Onl
A B I I C I D I E F G H I J I K
Proposed Properties of Mason and Concrete L M
�' Added Interior or Exterior Insulation
Walls From Reference in Furring Space from Reference
Joint A ndix Table 43 43. 43.7 Joint A oda Table 43.13
u v
V s
• a ow..d
ty 3 G 0 F ftp
. Mass NameAssembly'
c .� `o U d u ^ Final
Name or JA4 Table q ° ' ° g a ? '�
Thickness' T 2 Number' Q> k ,' Q; > Assemb 7
U -oto 'Comment
Registration Number. 312-A0010024A-000000000-0000 Registration Date/Time: 01 /06/2012 07:40:40 CBPCA
2008 Residential Compliance Forms HERS P: ovider:
August 2009
' ' 1. •f •t .... .`. l '�`�.. ... S _ .. 1�
•
Mass and Fumng Strips Construction ootnotes
1. Indicate the type of assembly to include: Hollow Unit Masonry Walls, Solid Unit Masonry, Solid Concrete Walls. Etc. Additional assemblies can .
found . Reference Joint Appendix JA4.
. This is the U -Factor based on'the thickness of [he assembly in inches.
3. _The R -value of the insulation to be. added on the interior'or exterior of the assembly.
The Calculated R- Value is the R -value of the fuvred out section of the assembly.
-6.7he Final Assembly is. calculated using•Equ ation 4-2 or Equation 4-4of the Reference Joint Appendix JA4. The equation is the inverse of Colum
added to Column L Column K is the inverse from column J
7. Insert the calcultited U- actor value on to the Opaque Surface - Detail$ . in Column J
FENESTRATION PROPOSED AREAS
❑ Replacing window alone - Replacement windows shall meet the U -Factor and SHGC Value requirements of Component Package D in
Table 151-C lite Total Fenestration and West facing Area requirements are not applicable.
❑ Adding 50ft2 or less of window area Newly installed windows shall meet the U -Factor and SHGC Vane requirements of Component
Package D in Table 151-C.
❑ Adding more than SOW of window area — Newly installed windows shall meet the U -Factor and SHGC Value and the Fenestration `
Area requirements of Component Package D in Table 151-0 Complete the Altered Fenestration Allowed Area Table on Page 2'of the CF -IR -ALT
FenestraCawamia, m NERC or Default
" sinflow GI , Value
,2.
1. Fenestration area is the area of total g ed&6--Jut QgXass plus frF.xceptoiLYlYJiedobi less _ g ; , the fenestration
area may be the glass area plus a "2 in'»r
2. Enter value from Component Package D equirem F, �KT, 131_ C 4r...
3. Actual fenestration products installed and as indicated in C R_ Form shall be equivalent too a,, H fact andlor a lower
SHGC value than that speed onrthe CF -1 R ALT Form.
4. Submit a completed WS -3R Form if a reduced SHGC is calculated with exterior shading.
5.1 applicable at this stage enter "NFRC"for NFRC Certified windows 'or are CEC "Default " valuesfound in Liable 116-A or B. i
ALTERED FENESTRATION ALLOWED AREAS
(Co»q7lete if more than Stiff'offenestradon is adled)
A
B
C
D
E
F
G
Allowed,
Existing
Fenestration
, Tdal Area
CFA of Entire
% of
Fenestration
Area
Fenestration
Allowed
Proposed Areae
Dwelling
CFA
Area
Removed
Area Added
Qk x B
-D + C
Total Fenestration Area
.20
>
West Fenestration Area
(Required In
.05
>
CZ's 2,4&7-15
.1. West Fenestration Area includes west -sloping skylights and any skylights with a pitch less than 1:12.
2. West facing glazing area removed cannot be "counted" twice. " In order to distribute the west glazing area removed to the other orientations,
input the west'glazing area removed in the Total Fenestration Area row, column D.
3. Include the Proposed Area of the West facing fenestration in both Area columns below.
4. To meet compliance, the Proposed Area must be less than or equal to the Total Allowed Area or BOTH the Total and West Fenestration Areas.
Registration Number: 312-A0010024A-000000000-0000 Registration Date/Time: 01/06/201207:40:40 HER; Provider: CBPCA
•2008 Residential Compliance Forms August 2009
ROOFING PRODUCTS (COOL ROOFS) §15112
,When the area of exterior roof surface to be replaced exceeds more than 50S6 of the existing roof area;• or more than.1,000 , whichever is
less,.the new roofing area must meet the rppftng product "Cool Roof' requirements of§152(b)IM4 152(6)1ffi4 or 152(b)1Hiii.
.Check applicable akernative or excepdon below if the roof alteration is exempt from.the roofing product "Cool Foof' requirements. Note: If arty
one of the alternatives or exception below is checked, the Aged Solar Reflectance and Thermal Emittance requirements for roofing products in
§118(t) are not applicable. Do•not fill table below.
O Cool Roofs Not Required in Climate Zones 1-12, 14, and 16 with a Low Sloped Less or 2:12 pitch.
Mool Roofs Not Required in Climate Zones I through 9 and 16 with a Steep -Sloped Roofs (pitch greater than 2:32) and product unit weight less
than 5lb/f . ,
Alternatives to §152(b)1Hi and §152(b)Hii, Steep -slope roof (pitch > 2.12)
❑ Insulation with a thermal resistance of at least 0.85 hrft •°FBtu or at.least a 314 inch air -space is added to the rooe deck
over an attic- oi.
-❑ . Existing ducts in the. attic are insulated and sealed according to §151(f)10; or
. ❑ In climate zones 10, 12 and 13, with I fig of free ventilation area of attic ventilation for every 150 fir of attic floor area, and
where at; least 30 percent of the free ventilation area is within 2 feet vertical distance of the roof ridge; or
❑ Building has at least R-30 ceiling insulation; or
❑ Building has er . the attic ung of §151(f)
❑ Building rata u�. ip erf®r ahce
❑ in climate zones 10 4 R-3 deck in a vented attic.
Exception to§152(6 riIosvlop�e f<(p V�nactors Association
❑ Building has acts the yr
Other Exceptions
+
io cartels a d �ttiern►aI r from the below Cool Roof criteria4h
.vC,❑ Roofing area co erect buiPldigg r#.s
+ _ . Jit }Roof constrt ermal• membrane" th least'25;iw is e m 1 Roof criteria
Note: If no CRRC-1 I isavatlal le° pl- ce in t * rsetli ormance A ach to+�lN__y'� compliance, otherwise,
Check the livable box tow if Exe Produ 1 Roo uire
x s. f
�Produet Weigh '' P lld t
al
CRRC Product ID Number
<,r5 i
Emt
SRI
❑. ❑
❑
Milo '.. sd.
Ari' �x e,'.
❑ ❑
❑ ❑
❑4
❑ ❑
❑ ❑ .
❑4
❑ ❑
❑ ❑
❑4
❑ ❑
❑ ❑
❑4.
1. The CRRC Product ID Number can be obtained from the Cool Roof Rating Council's Rated Product Directory at www.coolrtmfs.orn/aroducWsearch.den
2. Indicate the type of product is being used for the roof top, i.e. single ply roof, asphalt roof, metal roof, etc..
If the Aged Reflectance is not available in the Cool Roof Rating Counctl 's Rated Product Directory then use the Initial Reflecaance value from the same
directory and use the equation (0.2+0.7(p;,,j j — 0.2) to obtain a calculated aged value. Where p is the Initial Solar Reflechince.
4. Check box if the Aged Reflectance is a calculated value using the equation above.
5. Calculate the SRI value by using the SRI -'Worksheet at hap:/hvww.enerev.cagov/etle24/and enter the resulting value in the 'RI Column above and anach atopy of
the SRI- Worksheet to the CF -1 R
To apply Liquid Field Applied Coatings, the coating must be applied across the entire roof surface and meet the iry mil thickness or coverage
recommended by the coatings manufacturer and meet minimum performance requirements listed in § 118(i)4. Select the applicable coating:
❑ Aluminum -Pigmented Asphalt Roof Coating
Cement -Based Roof Coating Other
Registration Number: 312-A0010024A 000000000 0000 Registration Date/Time: 01/06/2012 07:40:40 'HERS'' Provider: CBPCA
2008 Residential Compliance Forms August 2009
HVAC SYSTEMS - HEATING
List water heaters `Hers for bothlo h0 w rs hydroirt heating.
as r � �,..i�u} *s. p x 3,1• taxa � 2L:. .e• ri'i• -`- ce
n
r�tvtdtial dwellnr'g HW heaters must be
s-`j�r, ^•+: � il-A�
MinimumDuct
t fire n znrd all underground
( �
or Piping Configuration
Heating Equipment
Efficiency
Distribution,
Insulation. ' Thermostat (Central, Split,
iXrEand cawityl.L3
AFUE or HSPF
Type and Location°
R -Value Type S P or H dronic
Furnace, 60000 _
80 AFUE.
Ducted;
SetBack Split
r•
1. Indicate Heating Type (Central Furnace, Wall Furnace, Heat pump, Boiler, Electric Resistance, etc)
2. Electric resistance -heating is allowed only in Component Package C,-orexcept where.electric heating is stWanental (i.e., if total capacity
< 2 KW or 7,000 Btu/hr electric heating is controlled by a time -limiting device not exceeding 30 minutes). See §151(b)3 exception.
3. Refer to the HERS Verification section on Page 4 of the'CF--I R -ALT Form for additional requirements and chezk applicable boxes.
4. Indicate Type or Location (Ducts, Hydronic in Floor, Radiators, etc.)
HVAC SYSTEMS - COOLING
Minimum,
Efficiency
Duct or Piping : Configuration
Cooling Equipment ' (SEER/EER or
Distribution Insulation Thermostat (Central, Split, "
Type and CAPacity1- COP)
Type and Location; R -Value Type S , Package or H dronic
AirCondiboner,Arnnn 16 SEQj2
®d SetBadc Split
t3ullulng: reutomanco-
1. Indicate Coolinye, '.'Z t;ump, I • •
Tl:: 4 tom: ��"V7✓•�•r`tl"G.
2. Refer to the HEfication'00 3'ag
0
"
3. Indicate T oo ct c to bor-Badiators. etc.
�a�"�'Mira"'�rY'�.�%'ni�'�.rr3�rli•:""�`�r� �::
WATER HEAVIN9k,
List water heaters `Hers for bothlo h0 w rs hydroirt heating.
as r � �,..i�u} *s. p x 3,1• taxa � 2L:. .e• ri'i• -`- ce
n
r�tvtdtial dwellnr'g HW heaters must be
s-`j�r, ^•+: � il-A�
gas or propane firedynaryrynolexceed Ogallo H water t'
• PQ< rom DHW
f e�
t fire n znrd all underground
( �
zip • � �
hot water pipes is required in all com ne takaa a vtlt ttttate.zone _ „
External Tank
Water Heater Type/Fuel Distri ution Type um n
F r, Insulation
T (Standard, Recirculating) System C (gal)
R -Value
la
Ki"
I. Indicate Type (Storage Gas, Heat Pump, Instantaneous, etc.)
2. Recirculating systems serving multiple dwelling units shall meet the `recirculation requirements of §150(n). 71:e Prescriptive requirements do
not allow the installation of a recirculating water heating system for single dwelling units.
,
3. The external water heating tank andpoes shall be insulated to meet therequirements o 150 • .
SPECIAL FEATURES The enforcement agency should pay special attention to the Special Features specified in this checklist below.
These items may require writtenjustification and documentation and special verification.
NEW ROOF ASSEMBLY - Radiant Barrier
The radiant barrier requirement of § 151 2 does not apply to roof alterations.
Slab Edge (Perimeter) Insulation 0 YES ® NO
YES: In Climate Zone 16 in Component Packages D, R-7 insulation is required
Heated Slab Insulation O YES - 0 NO
YES: Slab edge insulation required for all heated slabs in all Climate Zones. See details in Table 118-A of the s andards.
Raised Slab Insulation 0 YES ONO
YES: In Climate Zones 1, 2, 11, 13, 14 & 16, R-8 insulation is required, in Climate Zones 12 & 15, R-4 is requived under component Package D.
.Thermal Mass
` To obtain Compliance Credit for the installation of thermal mass, use the Performance Approach.
t
Registration Number: 312-A0010024A-000000000-0000 Registration Date/Time: 01/06/201207:40:40 HERS Provider: CBPCA '
'2008 Residential, Compliance Forms August 2009
rm
�Preser..'i .tive:C�rtifcate.of.Com liatice:`,Residen6al ..' ':.:-:'; •`.GF=1It=ALT• '.
Residential A1terations .: a a 5'of
Project Name:: Climate Zone # # of Stories
Bauder,Brandt 15 1
HERS VERIFICATION SUMMARY.The enforcement agency should pay special attention to the HERS Measures specfiied.in this.
checklist below. A completed and signed CF -4R Form for all the measures specified shall be submitted to the building inspector before final
inspection
Duct Sealing &, Testing HERS verification is required for this measure.' '
0 YES.' . ❑ NO YES: In Climate Zones 2 and 9-16, if more than 40 linear feet of new or replacement ducts are installed in unconditioned.
space, the ducts are to be sealed per §152(b)lDii and the newly installed ducts are to be insulated per §151(f)10.
❑ •EXCEPTION: Existing duct systems that are extended, which are constructed, insulated or sealed with asbestos.
❑ YES O NO YES: In Climate Zones 2.and 9-16, if the existing space -conditioning system (RVAC equipment and ducting) is replaced, the
ducts are to be sealed per 4152(b) I Di.
❑ YES 13 NO YES: In Climate Zones 2 and 9-'16, if the existing HVAC equipment is replaced (including -ft replacement of the air handler,
'outdoor condensing unit of a split system, cooling or heating coil, or the furnace heat exchanger) the ducis are to be
sealed per §152(b)IE.
s ❑'EXCEPTION: Duct systems that are documented to have been previously sealed confirmed through ITERS
verification in accordance with procedures in the Reference Residential Appendix RA3.
13EXCEPTION: Duct systems with less than 40 linear feet in unconditioned space.
❑: EXCEPTION: Existin duct systems constructed,insulated or sealed with asbestos. t
Refrigerant Charge.- Split System . HERS verification is required for this measure.,
® YES 13 N ES: ge,Zone$2 and stun HV is relaced including the replacement of the air
" �I, or the furnace heat
a re _ shf$ verified 1 F.
Central Fan Int ted' V a -fi18ASsociation
The ventilation e, ofNa"t toe ' residential homes
Ducted Split Sy ttas it Conditto e'iS��eh p eattP ps Atfflow P ver eat required for this measure.
cwt
13 YES N Clim n all Il thro ` $when the°e space -condi sy (HVAC equipment and ducting) is
"the o fan dray.shal vekjiied pati ` 5 1 m of § 151(f)7B.
Documentation Author's Declaratio tSatemen }'it �-
• I cern that this Certificate of Co "" ` um ion is'd°a b `' r '•Y,
QCcctrrau late.
Name: Tim Esser ,
Signature: �►
Tim Esser ,
4
Company: Esser
Air Conditining r -
• 1/612012
Address. 36665 bankside Dr,Drive OFC,OFFICE
If Applicable ®CEA or CEPE
(Certification #):
City/State/Zip: Cathedral City Califomia 92234
Phone: 760-324-0550 r
Responsible Building Designer's Declaration Statement
• I am eligible under Division 3'of the California Business and Professions Code to accept responsibility for the building design identified on
this Certificate of Compliance.
• I certify that the energy features and performance specifications for the building design identified on this Certificate of Compliance conform
to the requirements of Title 24, Parts 1 and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information to document this
provided
building design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement.
agency for approval with this building permit application.
Name: Tim Esser
Signature:
Tim Esser
Company: Esser Air Condidning
1/6/2012 ,
Address:
36665 bankside Dr,Drive OFC,OFFICE ,
License: 48so46
City/State/Zip:
Cathedral City California 92234
Phone:
760-324-0550 ,
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at. 1 -8007772 -3300 -
Registration Number: 312-A0010024A-000000000-0000 Registration Date/Time: 01 /06/2012 07:40:40 HERS Provider: ' CBPCA
2008 Residential Compliance Forms August 2009
Bin .#
Qty. Of, is Quinta
Building & Safety Division
Box 1504,18-495 Calle Tampico
[A.Quinta, CA 92253 -:(760) 777-7012
Building Permit Application' and Tracking Sheet
Permit #P.O.
project Address: > t-( p(,ut4-
Owner's Name:.'b4Ra i) �A J ,u
A. P. Number.
Address: - y �{ 4 `'( -R)V \_J.4'
Legal Description:
Contractor: i- 6-- So RIJ 1 C.- i �-
res �w
//tt""
City, ST, Zip: `� Q J t,v �/�- fit• 2 �7 ?l
Tele hone:
�:sruy
Address: lq,,
Project Description: kaLAL-, Iwo 2 d% / 5t► N G
'91L
City, ST, Zip: 0IT� CA -.>c• 2231(
ll��P' St-rer-i7. WI—ref, —IdW, �
Telephone: '71,/ 321C. ��) v p'e%''' /
3 Tv,�J 16 Jere-jSl�Si"1'j Go
State Lie. # : .Lt460'J OL-i'G City Lic.
Arch., Engr., Designer
Address:
City,, ST, Zip:
Telephone:yv `ex �:: r
State Lic. #: 9.
Name of Contact Person:
Construction Type:. Occupancy:
project type (circle one): New Add'n Alter Repair Demo
Sq. Ft.: #Stories:
# Units:
Telephone # of Contact Person:
Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Reqld
Recd
TRACKING
PERMIT FEES
Plan Sets
Plan Check submitted
Item Amount
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposit. .
Truss Calcs.
Called Contact Person
Plan Check Balance
Titre 24 Calcs.
Plans picked up
Construction
Flood plain plan
Pians resubmitted..
Mechanical
Grading plan
2i'Review, ready for correctionsfissue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
fiY HOUSE:-
'^' Review, ready for eorreetionsfissue
Developer Impact Fee
Planning Approval_
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees