SA 2006-1034 Komar Desert CenterKOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
PA G E 1
KOMAR
La Quinta, CaliforniaLa Quinta, California
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
SUBMITTALS & APPROVALS
PROJECT DIRECTORY
TITLE
CONSTRUCTION REQUIREMENTS
SIGNAGE SPECIFICATIONS
PROHIBITED SIGNS
CROSS SECTIONS
MOUNTING DETAIL
LANDLORD:KOMAR INVESTMENTS, LLC
23 CORPORATE PLAZA, SUITE 247
NEWPORT BEACH, CA 92660
TEL 949-718-4844
FAX 949-718-4845
SGPA ARCHITECTURE AND PLANNING
1545 HOTEL CIRCLE SOUTH, STUDIO 200
SAN DIEGO, CA 92108
TEL (619) 297-0131
FAX (619) 294-9534
ARCHITECT:
CONSULTANT:
PROJECT
DIRECTORY
TABLE
OF CONTENTS
WALL SIGNS
MAJOR TENANTS
SHOP TENANTS
PAD TENANTS
GROUND SIGNS
MONUMENTS A1 and A2
SITE PLAN
10-11
16-21
12-15
3
2
1
4
5
6
7
8
22
9
PA G E 2
ULTRASIGNS ELECTRICAL ADVERTISING
9025 BALBOA AVENUE, STE 150
SAN DIEGO, CA 92123-1520
TEL (858) 569-1400 x104
FAX (858) 569-1453
ATTN: JOHN HADAYA
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
The intent of this sign criteria is to provide the guidelines necessar y to
achieve a visually coordinated, balanced and appealing sign environment,
harmonious with the architecture of the project, while maintaining
provisions for individual graphic expression.
Performance of this sign criteria shall be rigorously enforced and any
nonconforming sign shall be removed by the tenant or his sign contractor
at their expense, upon demand by the Landlord.
Exceptions to these standards shall not be per mitted without approval from
the Landlord and will require approval of a modification to the sign
program application by the Planning Director. If the applicant and
Planning Director cannot come to a deter mination, Planning Commission
review and approval will be required.
Accordingly, the Landlord will retain full rights of approval for any sign
used in the center.
No sign shall be installed without the written Landlord approval and the
required City permits.
1. Each Tenant shall submit to Landlord for written approval, three (3)
copies of the detailed shop drawings of this proposed sign, indicating
conformance with the sign criteria herein outlined.
2. The Landlord shall determine and approve the availability and position
of a Tenant name on any ground sign(s).
3. The Tenant shall pay for all signs, related materials and installation fees
(including final inspection costs).
4. The Tenant shall obtain all necessary per mits.
5. The Tenant shall be responsible for fulfillment of all requirements of this
sign criteria.
6. It is the responsibility of the Tenant’s sign company to verify all conduit
and transfor mer locations and service access prior to fabrication.
7. Should a sign be removed, it is the Tenant's responsibility to patch all
holes, paint sur face to match the existing color, and restore sur face to
original condition.
INTRODUCTIONA B LANDLORD/TENANT REQUIREMENTS
PA G E 3
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
1. All signs and their installation shall comply with all local building and
electrical codes.
2. All electrical signs will be fabricated by a U.L. approved sign company,
according to U.L. specifications and bear U.L. Label.
3. Sign company to be fully licensed with the City and State and shall have
full Workman's Compensation and general liability insurance.
4. All penetrations of building exterior surfaces are to be sealed waterproof
in color and finish to match existing exterior.
5. Internal illumination to be 30 milliamp neon, installed and labeled in
accordance with the "National Board of Fire Underwriters Specifications".
6. Painted surfaces to have a satin finish. Only paint containing acrylic
polyurethane products may be used.
7. Logo and letter heights shall be as specified and shall be determined by
measuring the normal capital letter of a type font exclusive of swashes,
ascenders, and descenders.
8. All sign fabrication work shall be of excellent quality. All logo images
and type-styles shall be accurately reproduced. Lettering that
approximates type-styles will not be acceptable. The Landlord reserves the
right to reject any fabrication work deemed to be below standard.
9. All lighting must match the exact specification of the approved working
drawings. No exposed conduits or raceways will be allowed.
10. Signs must be made of durable rust –inhibiting materials that are
appropriate and complimentary to the building.
11. Color coatings shall exactly match the colors specified on the approved
plans.
12. Joining of materials (e.g., seams) shall be finished in way as to be
unnoticeable. Visible welds shall be continuous and ground smooth.
Rivets, screws, and other fasteners that extend to visible surfaces shall
be flush, filled, and finished so as to be unnoticeable.
13. Finished surfaces of metal shall be free from oil canning and warping.
All sign finishes shall be free from dust, orange peel, drips, and runs and
shall have a uniform surface conforming to the highest standards of the
industry.
14. In no case shall any manufacturer ’s label be visible from the street from
normal viewing angles.
15. Exposed junction boxes, lamps, tubing or neon crossovers of any type
are not per mitted.
16. All raceways, conduits, etc... installed on rock background, corrugated
metal and/or back of parapets to be painted a specific color to be obtained
from the architect.
GENERAL SIGN CONSTRUCTION REQUIREMENTS:C
PA G E 4
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
D
The intent of this criteria is to encourage creativity to ensure the
individuality of each tenant sign as opposed to similar sign design,
construction, and colors repeated throughout the project. Signs must be
architecturally compatible with the entire center.
STOREFRONT SIGNAGE
The following types of constr uction will be allowed:
• Acrylic face channel letters
• Through face and halo channel letters
• Reverse pan channel letters
• Skeleton neon behind flat cut out shapes and letters.
• Open pan channel letters( Only in an artistic letter style/font)
• Push thru letters and logos in aluminum cabinets
• Flat cut out dimensional shapes and accents
• Metal screen mesh accents
The idea of using dissimilar materials and creating signs with varying
colors, layers, and textures will create an exciting and appealing retail
environment.
Sign area for all tenants will be calculated as follows:
1.0 square foot of sign area for every linear foot of leased frontage, not to
exceed 50 square feet per sign.
In order to allow creativity and artistic designs, ascending and descending
shapes will be allowed to extend up to 25% beyond the envelope limits
provided that the overall allocated square footage is not exceeded. In
other words, these areas shall be calculated individually and added to the
“boxed” area for the main sign body. (See diagram below)
TENANT SIGNAGE SPECIFICATIONS:
PA G E 5
Descending letter element
Descender: (The part of the lowercase letters, such as g, p, and y, which
extends below the other lowercase letters)
Irregular shaped icons & logos should be considered in
sign design for increased visual impact.
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
9. Banners may be permitted subject to Municipal Code requirements, Landlord's, and
City approval.
10. Billboard Signs are not permitted.
11. The use of permanent “sale” signs are prohibited.
12. No standard plex faced cabinet construction allowed
13. No exposed neon allowed.
Any tenant sign left after thirty (30) days from vacating premises shall become the
property of Landlord.
Landlord reserves the right to hire an independent electrical engineer at the Tenant's
sole expense to inspect the installation of all Tenant's signs and to require the Tenant to
have any discrepancies and/or code violations corrected at the Tenant's expense.
It is the Tenant's responsibility to maintain their signs in proper working and clean
conditions at all times . Otherwise, landlord reser ves the right to hire his own
contractor, make the necessary corrections, and bill tenant should it be deemed
necessary.
All signs not outlined in this sign program shall conform to the City ’s sign code.
1. Signs constituting a Traffic Hazard:
No person shall install or maintain, or cause to be installed or maintained, any
sign which simulates or imitates in size, color, lettering or design any traffic sign
or signal, or which makes use of the words "STOP", "LOOK", "DANGER" or any
words, phrases, symbols, or characters in such a manner as to inter fere with,
mislead or confuse traffic.
2. Signs in Proximity to Utility Lines:
Signs which have less horizontal or vertical clearance from authorized
communication or energized electrical power lines that are prescribed by the
laws of the State of California are prohibited.
3. Signs painted directly on a building surface will not be permitted.
4. Wall signs may not project above the top of a parapet, the roof line at the wall,
or roof line.
5. There shall be no signs that are flashing, moving or audible.
6. No sign shall project above or below the sign-able area. The sign-able area is
defined in the attached exhibit for tenants. All signs shall be limited to the
predetermined sign location and sign areas identified in the attached exhibits.
7. Vehicle Signs:
Signs on or affixed to trucks, automobiles, trailers, or other vehicles which are
use for advertising, identity, or provide direction to a specific use or activity not
related to its lawful activity are prohibited.
8. Light Bulb Strings:
External displays, other than temporary decorative holiday lighting which
consists of unshielded light bulbs are prohibited.
PROHIBITED SIGNS:
INSPECTION:
MAINTENANCE:
ABANDONMENT OF SIGNS:
E
F
G
H
PA G E 6
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
Section A
Illuminated LEXAN FACED CHANNEL display with
THROUGH FACE ILLUMINATION.
Use standard aluminum construction with Matthews (or
equivalent) satin acrylic polyurethane finish.
Faces use translucent Lexan with trim cap.
Illuminate with 30 ma neon.
Paint returns any color.
Section B
Illuminated REVERSE PAN CHANNEL display with HALO
ILLUMINATION.
Use standard aluminum construction with Matthews (or
equivalent) satin acrylic polyurethane finish.
Illuminate with 30 ma neon.
Paint faces and returns any color.
Section C
Illuminated LEXAN FACED CHANNEL display with
THROUGH FACE AND HALO ILLUMINATION.
Use standard aluminum construction with Matthews (or
equivalent) satin acrylic polyurethane finish.
Faces use Lexan with trim cap.
Illuminate with 30 ma neon.
Paint returns any color.
Section D
Illuminated ALUMINUM FACED CHANNEL display with
THROUGH FACE AND HALO ILLUMINATION.
Use standard aluminum construction with Matthews (or
equivalent) satin acrylic polyurethane finish.
Route out aluminum faces where graphics occur and back up or
push through lexan graphics.
Illuminate with 30 ma neon.
Paint face and returns any color.
Section B Section D
PA G E 7
AAAA
Section A
AA
Section C
AA NEON TUBE
CLEAR LEXAN BACKS
LEXAN BACKUP
FACIA
1/8 X 2" LAGS INTO EXPANSION SHIELDS
ALUMINUM RACEWAY
GTO-15 WIRE
TRANSFORMER
DISCONNECT SWITCH
ELECTROBITS
3/4" CONDUIT THRU WALL
ALUMINUM CHANNEL
4” RETURNS
1-3/8” PEG OFF WALL
INSTALL WITH 3- 1/8" X 3-1/2" SCREWS
INTO EXPANSION SHIELDS (EACH LETTER)
REVERSE PAN CHANNELS
THROUGH FACE AND HALO ILLUMINATION
WEEP HOLES
SIGN TO BE UL APPROVED AND BEAR UL LABEL
SECTION D
NEON TUBE
CLEAR LEXAN BACKS
LEXAN BACKUP
1/2” CLEAR PLEX PUSH THROUGH
FACIA
1/8 X 2" LAGS INTO EXPANSION SHIELDS
ALUMINUM RACEWAY
GTO-15 WIRE
TRANSFORMER
DISCONNECT SWITCH
ELECTROBITS
3/4" CONDUIT THRU WALL
ALUMINUM CHANNEL
4” RETURNS
1-3/8” PEG OFF WALL
INSTALL WITH 3- 1/8" X 3-1/2" SCREWS
INTO EXPANSION SHIELDS (EACH LETTER)
REVERSE PAN CHANNELS
THROUGH FACE AND HALO ILLUMINATION
PUSH THROUGH GRAPHICS
WEEP HOLES
SIGN TO BE UL APPROVED AND BEAR UL LABEL
SECTION E
NEON TUBE
CLEAR LEXAN BACKS
ALUMINUM FACE
FACIA
1/8 X 2" LAGS INTO EXPANSION SHIELDS
ALUMINUM RACEWAY
GTO-15 WIRE
TRANSFORMER
DISCONNECT SWITCH
ELECTROBITS
3/4" CONDUIT THRU WALL
ALUMINUM CHANNEL
4” RETURNS
1-3/8” PEG OFF WALL
INSTALL WITH 3- 1/8" X 3-1/2" SCREWS
INTO EXPANSION SHIELDS (EACH LETTER)
REVERSE PAN CHANNELS
HALO ILLUMINATION
WEEP HOLES
SIGN TO BE UL APPROVED AND BEAR UL LABEL
SECTION D
TRIM-CAP
STANDARD GLASS
STAND
ELECTRO-BITS
NEON TUBE
FASCIA
#10 SCREWS INTO PLASTIC
ANCHORS
ALUMINUM RACEWAY
GTO-15 WIRE
TRANSFORMER
DISCONNECT SWITCH
3/4" CONDUIT THRU WALL
PLEX FACE
ALUMINUM CHANNEL
5” RETURNS
WEEP HOLES
PLEX FACED CHANNEL LETTERS WITH ELECTRO-BITS
SIGN TO BE UL APPROVED AND BEAR UL LABEL
SECTION
BONDING & GROUNDING REQ'D PER ARTICLE 600 OF UL SAM
NEON TO HAVE AT LEAST 1/4" CLEARANCE FROM ALUMINUM
½”OFF PEG
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
UL APPROVED INSTALLATION DETAIL
CHANNEL LETTER WITH LED & POWER SUPPLY
EXPOSED RACEWAY ON I BEAM
LISTED DISCONNECT
SWITCH IN PRIMARY.
PRIMARY ELECTRICAL FEED
(EXISTING)
MOUNTING SURFACE
J-BOX (EXISTING)
½”ANCHOR BOLTS
(4) MIN. REQ.
NON CORROSIVE
EXAMPLE OF RACEWAY MOUNTED PLEX FACED CHANNEL LETTER DISPLAY
MOUNTED ON I BEAM
EXAMPLE OF EXTERNALLY ILLUMINATED FLAT CUT OUT GRAPHICS
MOUNTED TO MESH BACKGROUND
SINTRA GRAPHICS FLUSH MOUNTED
TO MESH BACKGROUND
SINTRA LETTERS
MESH BACKGROUND
1/8" NUTTED PEGS
PA G E 8
POWER SUPPLY
#10 NON CORROSIVE SCREWS
THREE PER LETTER
#10 NON CORROSIVE SCREWS
THREE PER LETTER
EXPOSED .090 ALUM RACEWAY
TRIM CAP
1/4" WEEP HOLES
.040 ALUMINUM LETTER RETURN
WELD TO .050 ALUM. BACK
3/16” ACRYLIC
LED
NOTE: CANOPY SIGNS HAVING DESCENDING
LETTERS SHALL BE ALLOWED TO EXTEND
25% BELOW THE EDGE OF THE CANOPY.
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
PA G E 9
TENANT
TENANT
TENANT
TENANT
TENANT
TENANT
TENANT
TENANT
A1
A2
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
MAJOR TENANT
MAXIMUM 70%
OF ADJACENT SURFACE
70% OF ADJACENT
SURFACE OR 6’-0” MAX
(WHICHEVER IS LESS)
SIZE: 1.0 SQUARE FOOT OF SIGN AREA PER LINEAR
FOOT OF LEASED PREMISES WITH A MAXIMUM OF 5
COPY:
HEIGHT:
0 SQUARE FEET
PER SIGN AND 100 SQUARE FEET TOTAL PER ELEVATION. MAXIMUM
OF THREE SIGNS PER TENANT. TOTAL SIGN AREA NOT TO EXCEED
150 SQUARE FEET PER TENANT.
MATERIALS: VARIETY OF TYPES PER SIGN CRITERIA,
SINGLE TYPE OF CONSTRUCTION ALLOWED.
ILLUMINATION: YES
TENANT NAME AND / OR LOGO
SEVENTY PERCENT OF UNINTERRUPTED FASCIA
LENGTH: SEVENTY PERCENT OF UNINTERRUPTED FASCIA
TYPEFACE: CUSTOM LOGO AND TYPE OK
COLORS: CUSTOM COLORS OK
SECONDARY SIGNS: YES (NOT TO EXCEED 25% OF TOTAL
ALLOWABLE SIGN AREA). ONLY MAJOR SERVICES/DEPARTMENTS
ALLOWED. NO ADVERTISING OR SLOGANS.
PA G E 1 0
MAXIMUM 75%
OF ADJACENT SURFACE LENGTH
70% OF ADJACENT
SURFACE HEIGHT OR
2’-6” MAX (WHICHEVER IS LESS)SECONDARY
WEST ELEVATION BUILDING “A” SCALE 3/32=1’-0”
(TENANTS OCCUPYING OVER 9,000 SQUARE FEET)
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
NORTH ELEVATION BUILDING “A” SCALE 3/32=1’-0” NORTHWEST ELEVATION
SOUTH ELEVATION BUILDING “A” SCALE 3/32=1’-0”
EAST ELEVATION BUILDING “A” SCALE 3/32=1’-0”
PA G E 1 1
ALTERNATE LOCATION
ALTERNATE LOCATION
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
TYPICAL PAD ELEVATION SCALE 1/8”=1’-0”
PAD TENANT
MAXIMUM 70%
OF ADJACENT SURFACE
70% OF ADJACENT
SURFACE OR 4’-0” MAX
(WHICHEVER IS LESS)
SIZE: MAXIMUM OF THREE (3) SIGNS PER TENANT WITH A MAXIMUM
OF FIFTY (50) SQ. FT. PER SIGN AND NOT TO EXCEED 100 SQ. FT. PER
BUILDING. NO MORE THAN ONE SIGN PER ELEVATION.
COPY:
HEIGHT:
MATERIALS: VARIETY OF TYPES PER SIGN CRITERIA,
SINGLE TYPE OF CONSTRUCTION ALLOWED.
ILLUMINATION: YES
TENANT NAME AND / OR LOGO
SEVENTY PERCENT OF UNINTERRUPTED FASCIA
(CENTERED VERTICALLY)
LENGTH: SEVENTY PERCENT OF UNINTERRUPTED FASCIA
(CENTERED HORIZONTALLY)
TYPEFACE: CUSTOM LOGO AND TYPE OK
COLORS: CUSTOM COLORS OK
SECONDARY SIGNS: NO
PA G E 1 2
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
SCALE 1/16”=1’
PAD TENANT
WEST ELEVATION PAD BUILDING “G”
SOUTH ELEVATION PAD BUILDING “G”
PAD TENANT
PA G E 1 3
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
SCALE 1/16”=1’
EAST ELEVATION PAD BUILDING “G”
NORTH ELEVATION PAD BUILDING “G”
PAD TENANT
PAD TENANT
PA G E 1 4
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
NORTH ELEVATION PAD BUILDING “J”
SOUTH ELEVATION PAD BUILDING “J”
EAST ELEVATION PAD BUILDING “J”
WEST ELEVATION PAD BUILDING “J”
PA DPAD TENANT
SCALE 1/16=1’
PA G E 1 5
PAD TENANT
PA D
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
TYPICAL SHOP TENANT ELEVATION SCALE 1/8=1’-0”
(BUILDINGS H, G, I, J)
SHOP TENANT
MAXIMUM 70%
OF ADJACENT SURFACE
70% OF ADJACENT
SURFACE OR 2’-6” MAX
(WHICHEVER IS LESS)
SIZE: 1.0 SQUARE FOOT OF SIGN AREA PER LINEAR
FOOT OF LEASED PREMISES NOT TO EXCEED 50 SQUARE FEET PER SIGN.
MAXIMUM OF TWO (2) SIGNS PER IN-LINE TENANT AND THREE (3) SIGNS
PER END -CAP TENANT. TOTAL SIGN AREA NOT TO EXCEED 100 SQUARE
FEET PER TENANT
COPY:
HEIGHT:
MATERIALS: VARIETY OF TYPES PER SIGN CRITERIA,
SINGLE TYPE OF CONSTRUCTION ALLOWED.
ILLUMINATION: YES
TENANT NAME AND / OR LOGO
SEVENTY PERCENT OF ADJACENT SURFACE
LENGTH: SEVENTY PERCENT OF ADJACENT SURFACE
TYPEFACE: CUSTOM LOGO AND TYPE OK
COLORS: CUSTOM COLORS OK
SECONDARY SIGNS: NO
CANOPY SIGNS:
CANOPY SIGNS CAN BE USE IN PLACE OF A WALL MOUNTED SIGN.
HEIGHT: MINIMUM OF 12 INCHES, MAXIMUM OF 18 INCHES
LENGTH: NOT TO EXCEED 75% OF CANOPY LENGTH
NOTE: SIGNS LIMITED TO THE LOCATIONS IDENTIFIED INTHIS CRITERIA.
PA G E 1 6
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
SCALE 1/32”=1’
WEST ELEVATION BUILDING - B AND C
NORTH ELEVATION BUILDING - B AND C
EAST ELEVATION BUILDING - B AND C
PA G E 1 7
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
NORTH ELEVATION BUILDING -D
SOUTH ELEVATION BUILDING - DWEST ELEVATION BUILDING - D
EAST ELEVATION BUILDING -D
SCALE 1/16”=1’
PA G E 1 8
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
SCALE 1/16”=1’
NORTH ELEVATION BUILDING -E
SOUTH ELEVATION BUILDING - E
EAST ELEVATION BUILDING - E
WEST ELEVATION BUILDING - E
PA G E 1 9
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
NORTH ELEVATION BUILDING -F
SOUTH ELEVATION BUILDING - F
WEST ELEVATION BUILDING - F
EAST ELEVATION BUILDING -F
PA G E 2 0
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
NORTH ELEVATION BUILDING -H
SCALE 1/16”=1’
SOUTH ELEVATION BUILDING - H
WEST ELEVATION BUILDING - H
EAST ELEVATION BUILDING - H
PA G E 2 1
KOMAR DESERT CENTER SIGN PROGRAMKOMAR DESERT CENTER SIGN PROGRAM
DECEMBER 17, 2007 AT
AUGUST 3, 2007 AT
TENANT
TENANT
ANGELUS BLOCK CO.
SPLIT “OAK”
SW #7055 ENDURING BRONZE
SW #6152 SUPERIOR BRONZE
CORONADO STONE
DESERT RIDGE WEATHERED EDGE “CHABLIS”
COLOR / MATERIAL PALETTE
SW #2820 DOWNING EARTH
50% PMS #421
SW #2803 ROOKWOOD TERRA COTTA
#3635-222 PERFORATED BLACK VINYL
A2 NEW DOUBLE FACED INTERNALLY ILLUMINATED MONUMENT DISPLAY (MAKE TWO) SCALE 3/8”=1’
ROUTE-OUT ALUMINUM TENANT PANELS WHERE GRAPHIC OCCUR AND BACK UP WITH #7328 WHITE LEXAN.
“KOMAR” TO BE ROUTE-OUT AND PUSH-THROUGH ½” WHITE ACRYLIC WITH APPLIED #222 PERFORATED BLACK VINYL.
“DESERT CENTER” TO BE ROUTE OUT AND PUSH THROUGH ½”CLEAR ACRYLIC WITH DIFFUSER PANEL AND APPLIED
#20 WHITE VINYL.
A1
PA G E 2 2
8'-0"1'-0"
1'-0"
5'-0"5'-0"
12'-0"
2'-5"
14'-0”
TENANT
TENANT
0'-6"
0'-5"
3'-4"
5'-3 3/4"
0'-8 1/2"
0'-8 1/2"