11-0582 (RER) - I IIIIIII VIII III VIII IIII 78 •
P.O. BOX 1504 - `� VOICE(760) 777-7012
78-495 CALLE TAMPICO FAX(760) 777-7011 ..
LA QUINTA, CALIFORNIA 92253 BUILDING&SAFETY DEPARTMENT INSPECTIONS (760)777-7153
BUILDING PERMIT
Date: 6/23/11
Application Number: 11-00000582; ' Owner:
Property Address: 80872-CALLE"AZUL FRANKLIN BRUCE W & KRISTY A
APN: 762-240-003-60 -300962- 81060 KINGSTON HEATH
Application description: REMODEL - RESIDENTIAL LA QUINTA, ' CA 92253 _
Property Zoning: MEDIUM DENSITY RES (760)564-1272
Application valuation: 10000
Contractor: AIN 21
Applicant: Architect or Engineer: DAVIS RESTORATION OF GREAT, P
77833 PALAPAS ROAD
PALM DESERT, CA 92211 D -
(760)360-1855
Lic. No. : 677877
- - ----------------------- ----- -- ----- ----------------- --- -------------------------------- --------
LICENSED CONTRACTOR'S DECLARATION WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury that I am licensed f Chapter 9(commencing with I hereby affirm under penalty of perjury one of the following declarations:
Section 70001 of Division 3 of the eusines ro, Code, nd my License is in full force and effect. _ I have and will maintain a certificate of consent to self-insure for workers'compensation,as provided
Lice 'e Class: B Li ns o.: 7877 for by Section 3700 of the Labor Code,for the performance of the work for which this permit is
issued.
Date: C tractor: I have and will maintain workers'compensation insurance,as required by Section 3700 of the Labor
Code,for the performance of the work for which this permit is issued. My workers'compensation
• OWNER-BUILDER DECLARATION insurance carrier and policy number are:
1 hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the Carrier NATIONAL UNION Policy Number 4880544
following reason(Sec.7031.5,Business and Professions Code: Any city or county that requires a permit to _ I certify that,in the performance of the work fo 's ermit is issued,I shall not employ any
construct,alter,improve,demolish,or repair any structure,prior to its issuance,also requires the applicant for the person in any manner so as to become ject to the wore 'compensation laws of California,
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State and agree that,if I should become s je o e orker co ensation provisions of Section
License Law(Chapter 9(commencing with Section 7000)of Division 3 of the Business and Professions Code)or 3700 of the Labor Cod all fo hose rovisions.
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars($500) 1Date: -'L - pplicant:
(_1 I,as owner of the property,or my employees with wages as their sole compensation,will do the work,and
the structure is not intended or offered for sale(Sec.7044,Business and Professions Code: The WARNING: FAILURE TO SECURE WORKERS'COMPENSATION COVERAGE IS UNLAWFUL,AND SHALL
Contractors'State License Law does not applyto an owner of property who builds or improves thereon, SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
and who does the work himself or herself through his or her own employees,provided that the DOLLARS($100,000). IN ADDITION TO THE COST OF COMPENSATION,DAMAGES AS PROVIDED FOR IN
improvements are not intended or offered for sale. If,however,the building or improvement is sold within SECTION 3706 OF THE LABOR CODE,INTEREST,AND ATTORNEY'S FEES.
one year of completion,the owner-builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.). APPLICANT ACKNOWLEDGEMENT
(_1 I,as owner of the property,am exclusively contracting with licensed contractors to construct the project(Sec. IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
7044,Business and Professions Code: The Contractors'State License Law does not apply to an owner of conditions and restrictions set forth on this application.
property who builds or improves thereon,and who contracts for the projects with a contractor(s)licensed 1. Each person upon whose behalf this application is made,each person at whose request and for
pursuant to the Contractors'State License Law.). whose benefit work is performed under or pursuant to any permit issued as a result of this application,
(_1 I am exempt under Sec. ,B.&P.C.for this reason the owner,and the applicant,each agrees to,and shall defend,indemnity and hold harmless the City
of La Quinta,its officers,agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
Date: Owner: - 2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit,or cessation of work for 180 days will subject
CONSTRUCTION LENDING AGENCY permit to cancellation.
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the I certify that I have read this application and state that the above information is c rrect. I ree to comply with all
work for which this permit is issued(Sec.3097,Civ.C.). city and county ordinances and state laws relating to buildin e tructio ,a he y a oriz presentatives
of thi county to enter upon the above-mentioned propert i--pecti S.
Lender's Name:
ate: (Applicant or Agent(:
Lender's Address: 16
LQPERMIT
Application Number . . . . . 11-00000582
------ Structure Information FIRE DAMAGE REPAIR [ENGINEERED] -----
Other struct info . . . . . CODE EDITION 2010
# BEDROOMS 2.00
----------------------------------------------------------------------------
Permit . . . ELECT - ADD/ALT/REM
Additional desc .
Permit Fee . . . . 26.00 Plan Check Fee 6.50
Issue Date . . . . Valuation 0
Expiration Date 12/20/11
Qty Unit Charge Per Extension
BASE FEE 15.00
1.00 11.0000 •EA ELEC MISC 11.00
----------------------------------------------------------------------------
Permit BUILDING PERMIT
Additional desc .
Permit Fee . . . . 117.00 Plan Check Fee 76.05
Issue Date . . . . Valuation . . . . 10000
Expiration Date 12/20/11
Qty Unit Charge. Per Extension
BASE FEE 45.00
8.00 9.0000 THOU BLDG 2,001-25,000 72.00
----------------------------------------------------------------------------
Permit . . . MECHANICAL
Additional desc . .
Permit Fee 19.50 Plan Check Fee 4.88
Issue Date . . . . Valuation . . . . 0
Expiration Date 12/20/11
Qty Unit Charge. Per Extension
BASE FEE 15.00
1.00 4.5000 EA MECH VENT INST/ DUCT ALT 4.5Q
----------------------------------------------------------------------------
Permit . . . PLUMBING
Additional desc .
Permit Fee 18.00 Plan Check Fee 4.50
Issue Date . . . . Valuation . . . . 0
Expiration Date 12/20/11
Qty Unit Charge Per Extension
BASE FEE 15.00
1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00
LQPERMIT
n
Application Number . . . 11-00000582
-----------7----------------------------------------------------------------
Special Notes and Comments
FIRE DAMAGE REPAIR AT GUEST BEDROOM AND
BATH, HALL, AND LAUNDRY WITH STRUCTURAL
TRUSS FIX (ENGINEERED] THIS PERMIT DOES
NOT INCLUDE ALTERATIONS OR ADDITIONS TO
THE -REMAINING RESIDENCE. 2010 CALIFORNIA
BUILDING CODES.
June 23, 2011 8:42:21 AM AORTEGA
---------------------------------- -----------------------------------------
Other Fees . . . . . . BLDG STDS ADMIN (SB1473) 1.00
ENERGY REVIEW FEE 7.61
STRONG MOTION (SMI) - RES 1.00
Fee summary Charged Paid Credited Due
----------------- ---------- ---------- ---------- ---------
Permit Fee Total 180.50 .00 .00 180.50
Plan Check Total, 91.93 .00 .00 91.93
Other Fee Total 9.61 .00 .00 9.61
Grand Total 282.04 .00 .00 282.04
LQPERMIT -
Bin# `ik Cit/ of La Quinta
Building 8r Safety Division '
Permit# P.O.Box 1504,78-495 Calle Tampico
La Quinta,CA 92253-(760) 777-7012
Building Permit Application and Tracking Sheet
Project Address: ®97 7z/,//z, '. Owner's Name:
A.P.Number: ,0 v Address: ��8 7 A/z v
Legal Description: City,ST,Zip:
Consx
tractor: , P Co G!/ Z/0 4:i :iv NS: ,;, (.
Tele hone: ,,,,,[f5S ,y .i ...:3:.,:.:<.!•.:;:;�t'
Address: Project Description: Allfe
City,ST,Zip:
Tel ephone:76 jfi � v�:<;::�-�M•:,:z.�,�:;s•` • •$ •>:;:�:'- v0 � .L/�G
\lr.i4:p,:.:•:$iiiyi� '...'CI`J4.•...::.5:
State Lic.#: City Lic.#: 1 Pb W at.
.Arch.,Engr.,Designer:
Address: Q� .f/ , jW�`�� 35'L••35$ '
City.,ST,Zip:
Telepho e 6 »t > ;:;✓> "'`
•.
Construction TyP •
Occupancy
y ,
S e Lic.#: \ d'n
Alter Repair Demo
,ne of Contactierson:e��ls �� J v of Sq. t: #Stories: #Units:
Tel hone#of dontact Person: l/3 S J � Estirna4d Value of Project: o
APPLICANT: DO NOT WRITE_B LOW THIS LINE
# Submittal eg-d -- -Read
=_- _.- C G
-ed PERMIT FEES
Plan Sets Plan Check submitted Item Amount
Structural Cafes. Reviewed,ready for corrections ,�� Plan Check Deposit ------
Truss
——Truss Calcs. Called Contact Person Plan Check Balance +--
Tide 24 Calcs. Plans picked up Construction
Flood plain plan Plans resubmitted Mechanical
Grading plan , 2p°Review,ready fo orrectio issue Electrical .
Subcontactor List Called Contact Person Plumbing
Grant Deed Plans picked up S.M.I.
H.O.A.Approval Plans resubmittedb Grading
IN HOUSE:- 'A Review,ready for correctio sa Developer Impact Fee
Planning Approval Called Contact Person A•I•P•P• .�
Pub.Wks.Appr Date of permit issue�O '•�
School Fees
Total Permit Fees
b lllb`�o t l — �.?S ri'. ew�D ca*ac A�vt BJ'c atsco ICt6a7
�- B"LArO Pte-fto�S ott Fox AA&W4P
C11�y ,
NJI!Z041w 9710C 6121
b Zeit- fyi. Gp�prGc.'tu>�S
IIIIIIIIIIIIIIIIIIIIIIIII 79
IE
BUILDING:.-ENERGY ANALYSIS REPORT
�o
PROJECT:
80872 'CALLE AZUL
L-A QUI NTA , CA 92253
Project:Designer:
POWELL AND ASSOCIATES
9980 INDIANA AVE
RIVESIDE, CALIF 9250.3 r
951-3523588
Report Prepared:by:
Powell and Associates .Drafting
il-OM. MCA
CITY OF LA QUINTA
BUILDING & SAFETY DEPT.
APPROVED
FOR CONSTRUCTION
DATE mal ev Job Number:
��I��D
065403
JUN 16 2011
Date:
6/16/2011 BY.
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report.This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft,LLC—www.energysoft.com.
Ener Pro 5.1by Energ Soft User Number:6914 RunCode:2011-06-16T1?:37:10 0:065403
TABLE OF CONTENTS
Cover'Page 1
Table of Contents 2
Form CF-1 R Certificate of Compliance 3
Form MF-1,R Mandatory Measures Summary 8
EnergyPro 5.1 by EnergySoft Job Number: ID:065403 User Number.6914
PERFORMANCE CERTIFICATE: 'Residential Part 1 of 5 CF-1 R
Project Name Building Type m Single Family ❑Addition Alone Date
❑ Multi Family ❑ Existing+Addition/Alteration 6/16/2011
Project Address California Energy Climate Zone Total Cond.Floor Area Addition #of Stories
80872 CALLE AZUL LA QUINTA CA Climate Zone 15 1,424 n/a 1
'FIELD INSPECTION :ENERGY CHECKLIST
❑ Yes ❑ No HERS Measures -- If Yes, A CF-4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION Area Special
Construction Type Cavity (ft) Features see Part.2 of 5) Status
Wall Wood Framed R-13 979 Existing
Door Opaque Door None 22 Existing
Roof Wood Framed Attic R-38 1,501 Existing
Slab Unheated Slab-on-Grade None 1,424 Perim=152' Existing
'FENESTRATION U- .Exterior
Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status
Front(S) 20.0 0.710 0.73 none none Bug Screen Existing
Right(E) 85.0 0.710 0.73 none none Bug Screen Existing
Rear(N) 72.0 0.710 0.73 none none Bug Screen Existing
Left(W) 15.0 0.710 0.73 none none Bug Screen Existing
Left(W) 20.0 0.370 0.32 none none Bug Screen New
HVAC.SYSTEMS
Qty. -Heating Min. Eff Cooling Min. Eff Thermostat Status
1 Central Furnace 78%AFUE Split Air Conditioner 13.0 SEER Setback' Existing
HVAC:DISTRIBUTION Duct
Location Heating Cooling Duct.Location R-Value Status
HVAC System Ducted Ducted Attic, Ceiling Ins,vented 8.0 Existing
WATER HEATING
Qty. Type Gallons Min. Eff .Distribution Status
Energ Pro 5.1 by Energ Soft User Number:6914 RunCode:2011-06-16711:37:10 ID.-065403 Page 3 of 10
PERFORMANCE CERTIFICATE: 'Residential (Part.2 of 5) CF-1R
Project Name Building Type 0 Single Family 0 Addition Alone Date
0 Multi Family 0 Existing+Addition/Alteration 6/16/2011
SPECIAL FEATURES INSPECTION CHECKLIST
The enforcement agency should pay special attention to the items specified in this checklist.These items require special written
justification and documentation,and special verification to be used with the performance approach.The enforcement agency
determines the adequacy of the justification,and may reject a building or design that otherwise complies based on the adequacy of
the special justification and documentation submitted.
HERS"REQUIRED VERIFICATION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a
completed CF-4R form for each of the measures listed below for final to be given.
Ener Pro 5.1 by Ener Soft User Number:6914 RunCode:2011-06-16T11:37:10 ID:065403 Page 4 of 10
PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF-1 R
Project Name Building Type m Single Family ❑ Addition Alone Date
❑ Multi Family ❑ Existing+Addition/Alteration 6/16/2011
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV (kBtu/ft2-yr)
Space Heating 4.31 4.29 0.03
Space Cooling 122.13 121.88 0.25
Fans 26.95 26.89 0.06
Domestic Hot Water 0.00 0.00 0.00
Pumps 0.00 0.00 0.00
Totals 153.39 153.06 0.33
Percent Better Than Standard: 0.2%
:BUILDING COMPLIES `NO HERS VERIFICATIONREQUIRED
Fenestration
Building Front Orientation: (S) 180 deg Ext.Walls/Roof Wall Area Area
Number of Dwelling Units: 1.00 (S) 275 20
Fuel Available at Site: Natural Gas (W) 331 35
Raised Floor Area: 0 (N) 275 72
Slab on Grade Area: 1,424 (E) 331 85
Average Ceiling.Height:.. . . . _.. _ e.0. ._ Roof 1,501 0
Fenestration Average U-Factor: 0.68 TOTAL: 212
Average SHGC: 0.69 Fenestration/CFA Ratio: 14.9%
REMARKS
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the
Efficiency Standards of the California Code of Regulations.
The documentation author hereby certifies that the documentation is accurate and complete.
Documentation Author
Company Powell and Associates Drafting
6/2011
Address Name
City/State/ZipCity/State/Zip Phone i ned Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require
installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Company POWELL AND ASSOCIATES
Address 9980 INDIANA AVE Name WADE POWELL /
City/State/Zip RIVESIDE, CALIF 92503 Phone 951-3523588 Signe License# Date
Ener Pro 5.1 by Ener Soft User Number:6914 RunCode:2011-06-16T11:37:10 0:065403 Page 5 of 10
CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF-1 R
Project Name Building Type m Single Family ❑Addition Alone Date
0 Multi Family ❑ Existing+Addition/Alteration 1611612011
OPAQUE SURFACE DETAILS
Surface U- Insulation Joint Appendix
Type Area Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
Wall 233 0.102 R-13 180 90 Existing 4.3.1-A3 Zone 1
Door 22 0.500 None 180 90 Existing 4.5.1-A4 Zone 1
Wall 246 0.102 R-13 90 90 Existing 4.3.1-A3 Zone 1
Wall 203 0.102 R-13 0 90 Existing 4.3.1-A3 Zone 1
Wall 296 0.102 R-13 270 90 Existing 4.3.1-A3 Zone 1
Roof 1,5011 0.025 R-38 180 0 Existing 4.2.1-A21 Zone 1
Slab 1,424 0.730 None 0 180 Existing 4.4.7-A1 Zone 1
FENESTRATION SURFACE DETAILS
ID Type Area U-Factor SHGC Azm Status Glazing Type Location/Comments
1 Window 20.0 0.710 Default 0.73 Default 180 Existing Double Metal Clear Zone 1
2 Window 85.0 0.710 Default 0.73 Default 90 Existing Double Metal Clear Zone 1
3 Window 72.0 0.710 Default 0.73 Default 0 Existing Double Metal Clear Zone 1
4 Window 15.0 0.710 Default 0.73 Default 270 Existing Double Metal Clear Zone 1
5 Window 20.0 0.370 NFRC 0.32 NFRC 270 New IWC 5300 Vinyl/Low-E Zone 1
(1) U-Factor Type: 116-A=Default Table from Standards,NFRC=Labeled Value
2) . SHGC Type: 116-B=Default Table from Standards,NFRC=Labeled Value
EXTERIOR SHADING DETAILS
Window Ove hang Left Fin Right Fin
ID Exterior Shade Type SHGC H t Wd Len H t LExt RExt Dist Len H t Dist Len H t
1 Bug Screen 0.76
2 Bug Screen 0.76
3 Bug Screen 0.76
4 Bug Screen 0.76
5 Bug Screen 0.76
Ener Pro 5.1 by Ener Soft User Number:6914 RunCode:2011-06-16711:37:10 0:065403 Page 6 of LO
CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5) CF-1 R
Project Name Building Type ®Single Family ❑Addition Alone Date
❑ Multi Family ❑ Existing+Addition/Alteration 6/16/2011
BUILDING ZONE INFORMATION
Floor Area
System Name Zone Name New Existing Altered Removed Volume Year Built
HVAC System Zone 1 1,424 11,394 2000
Totals - 0 -4.1,424 01 01 1
HVAC SYSTEMS
System Name Q!y._ Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status
HVAC System 1 Central Furnace 78%AFUE Split Air Conditioner 13.0 SEER Setback Existing
HVAC DISTRIBUTION
Duct Ducts
System Name Heating Cooling Duct Location R-Value Tested? Status
HVAC System Ducted Ducted Attic, Ceiling Ins, vented 8.0 ❑ Existing
El
WATER HEATING SYSTEMS
Ext.
Rated Tank Energy Standby Tank
Input Cap. Factor Loss or Insul. R-
S stem Name Qty. Ty e Distribution Btuh (gal) or RE Pilot Value Status
CEC Standard
MULTI-FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING
Hot Water Piping Length
E ff o
2 76E
c Pipe Pipe Insul.
Control Qt . HP w o- Plenum Outside Buried ¢ S stem Name Len th Diameter Thick.
❑ ❑
❑ ❑
❑ ❑
❑ ❑
Ener Pro 5.1 by Ener Soft User Number:6914 RunCode:2011-06-16711:37:10 ID:065403 Pae 7 of 10
MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF-1 R
Project Name Date
6/16/2011
NOTE:Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance(CF-1 R,CF-1 R-ADD,or CF-
1 R-ALT Form)shall supersede the items marked with an asterisk(*) below.This Mandatory Measures Summary shall be incorporated
into the permit documents,and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF-1 R
Form with plans.
Building Envelope Measures:
116(a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§116(a)4: Fenestration products(except field-fabricated windows) have a label listing the certified U-Factor,certified Solar Heat Gain
Coefficient SHGC ,and infiltration that meets the requirements of 10-111(a).
117: Exterior doors and windows are weather-stripped;all joints and penetrations are caulked and sealed.
118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF-6R Form.
§118(i):The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of§118(i)when the
installation of a Cool Roof is specified on the CF-1 R Form.
*§150(a):Minimum R-19 insulation in wood-frame ceiling or equivalent U-factor.
150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R-Value.
*§150(c): Minimum R-13 insulation in wood-frame wall orequivalent U-factor.
*§150(d):Minimum R-13 insulation in raised wood-frame floor orequivalent U-factor.
150(f):Air retarding wrap is tested, labeled,and installed according to ASTM E1677-95 2000 when specified on the CF-1 R Form.
150 :Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§150(1):Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%;water vapor permeance
rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
150(e)1A:Masonry or factor -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150(e)1 B:Masonry or factory-built fireplaces have a combustion outside air intake,which is at least six square inches in area and is
equipped with a with a readily accessible,operable,and tight-fitting damper and or a combustion-air control device.
§150(e)2:Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket,when that indoor air is vented to the
outside of the building,are prohibited.
Space Conditioning,Water Heating and Plumbing System Measures:
§110-§113: HVAC equipment,water heaters,showerheads,faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5:Water heating recirculation loops serving multiple dwelling units and High-Rise residential occupancies meet the air release
valve,backflow prevention,pump isolation valve, and recirculation loop connection requirements of§113(c)5.
§115:Continuously burning pilot lights are prohibited for natural gas:fan-type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt),and pool and
spa heaters.
150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c).
§1500)1 A:Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§1500)1 B: Unfired storage tanks,such as storage tanks or backup tanks for solar water-heating system,or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the
tank.
§1500)2:First 5 feet of hot and cold water pipes closest to water heater tank, non-recirculating systems,and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 150-B.
§150(j)2:Cooling system piping (suction,chilled water,or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150-B and Equation 150-A.
§1500)2:Pipe insulation for steam hydronic heating systems or hot water systems>15 psi,meets the requirements of Standards Table
123-A.
§150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture,equipment maintenance,and wind.
§150(j)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4:Solar water-heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
EnergyPro 5.1 by EnergySoft User Number:6914 RunCode:2011-06-16711:37:10 0:065403 Page 8 of 10
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF-1 R
Project Name Date
6/16/2011
§150(m)1:All air-distribution system ducts and plenums installed,are sealed and insulated to meet the requirements of CMC Sections
.601,602,603,604,605 and Standard 6-5;supply-air and return-air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space.Openings shall be sealed with mastic,tape or other duct-closure system that meets the
applicable requirements of UL 181, UL 181 A,or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is
used to seal openings reater than 1/4 inch,the combination of mastic and either mesh or tape shall be used
§150(m)1: Building cavities,support platforms for air handlers,and plenums defined or constructed with materials other than sealed
sheet metal,duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150(m)2D:Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7: Exhaust fans stems have back draft or automatic dampers.
§150(m)8:Gravity ventilating systems serving conditioned space have either automatic or readily accessible,manually operated
dampers.
§150(m)9: Insulation shall be protected from damage, including that due to sunlight,moisture,equipment maintenance,and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
150 m 10: Flexible ducts cannot have porous inner cores.
§150(o):All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air _
Quality in Low-Rise Residential Buildings.Window operation is not a permissible method of providing the Whole Building Ventilation
required in Section 4 of that Standard.
Pool and Spa Heating Systems and Equipment Measures:
§114(a):Any pool or spa heating system shall be certified to have:a thermal efficiency that complies with the Appliance Efficiency
Regulations;an on-off switch mounted outside of the heater;a permanent weatherproof plate or card with operating instructions;and
shall not use electric resistance heating ora pilot light.
§114(b)1:Any pool or spa heating equipment shall be installed with at least 36"of pipe between filter and heater, or dedicated suction
and return lines,or built-up connections for future solar heating.
114(b)2:Outdoor p ools ors as that have a heat pump or gas heater shall have a cover.
§114(b)3: Pools shall have directional inlets that adequately mix the pool water,and a time switch that will allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
§1 50 : Residential pool systems orequipment meet the pump sizing,flow rate,piping,filters,and valve requirements of§150(p).
Residential Lighting Measures:
§150(k)1:High efficacy luminaires or LED.Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies
contained in Table 150-C and is not a low efficacy luminaire asspecified by§150(k)2.
§150(k)3:The wattage of permanently installed luminaires shall be determined asspecified by§130(d).
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line-voltage socket or line-
voltage lamp holder;OR shall be rated to consume no more than five watts of power as determined by§130(d),and shall not contain a
medium screw-base socket.
150(k)6:Lighting integral to exhaust fans, in rooms other than kitchens,shall meet the applicable requirements of§150(k).
150(k)7:All switching devices and controls shall meet the requirements of§150(k)7.
§150(k)8:A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION:Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be
exempt from the 50%high efficacy requirement when:all low efficacy luminaires in the kitchen are controlled by a manual on occupant
sensor,dimmer,energy management system(EMCS),or a multi-scene programmable control system;and all permanently installed
luminaries in garages, laundry rooms,closets greater than 70 square feet,and utility rooms are high efficacy and controlled by a
manual-on occupant sensor.
§150(k)9:Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number:6914 RunCode:201 1-06-1 6 71 1:37:10 0:065403 Page 9 of 10
MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF-1 R
Project Name Date
6/16/2011
§150(k)10: Permanently installed luminaires in bathrooms,attached and detached garages, laundry rooms,closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual-on
occupant sensor certified to comply with the applicable requirements of§119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual-on occupancy sensor.
§150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms,garages, laundry rooms,
closets,and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of§119,or by a manual-
on occupant sensor that complies with the applicable requirements of§119. EXCEPTION 2:Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with§150 k 11.
§150(k)12:Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact(IC)by Underwriters
Laboratories or other nationally recognized testing/rating laboratory;and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283;and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)13:Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more
dwelling units,entrances, balconies, and porches,which are permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch,a motion sensor not having an override or bypass switch that disables the motion sensor,
and one of the following controls:a photocontrol not having an override or bypass switch that disables the photocontrol;OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock;OR an energy management
control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2:Outdoor
luminaires used to comply with Exceptions to§150(k)13 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool,water features,or other location subject to Article 680 of the California Electric Code need not
be high efficacy luminaires.
§150(k)14: Internally illuminated address signs shall comply with"Section 148;OR not contain a screw-base socket, and consume no
more than five watts of power as determined according to§130(d).
§150(k)15:Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134,and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable
requirements of Sections 130, 131, 134,and 146.
§150(k)16: Permanently installed lighting in the enclosed, non-dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119.
EnergyPro 5.1 by EnergySoft User Number.6914 RunCode:2011-06-16T11:37:10 0:065403 Page 10 of 10