SFD (11364)77545 Calle Madrid
11364
P.O. BOX 1504 ( N o . 11364
Building 78-105 CALLE ESTADO
Address 77--545 Madrid LA QUINTA, CALIFORNIA 92253
Owner - - /
Suncrown Corp.
Mailing
BUILDING: TYPE CONST. OCC: GRP.
Address BOX 804 A.P. Number
City Zip Tel.
La Quinta 92253 564-5231 Legal Description
Contractor
Larry Donoho Construction Project Description SFS3
Address -
380 Sand Springs
City Zip Tela
Palm S s 92262 322-'3569
State Lic. City
& Classif. 627265 Lic. # 2154
Arch., Engr.,
Designer
Address Tel.
CityI Zip I State I
Lic. #
LICENSED CONTRACTOR'S DECLARATION
1 hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section
7000) of Division 3 of the Business and Professions Code, and my license is in full force and
SGNATURE .+` DATE
OWNER -BUILDER DECLARATION
1 hereby affirm that 1 am exempt from the Contractofs License Law for the following
reason: (Sec. 7031.5,Business and Professions Code: Any city or county which requires a
permit to construct, after, improve, demolish, or repair any structure, prior to its issuance also
requires the applicant for such permit to file a signed statement that he is dcensed pursuant to
the provisions or the Contractor's License Law, Chapter 9 (commencing with Section 7000) of
Division 3 of the Business and Professions Code, or that. he is exempt therefrom, and the basis
for the alleged exemption. Any violation of Section 7031.5 by 'any applicant for a permit
subjects the applicant to a civil penalty of not more than rive hundred dollars ($500).
❑ 1, as owner of the property, or my employees with wages as their sole compensation, will
do the work, and the structure is not Intended or offered for sale. (Sec. 7044, Buisness and
Professions Code: The Contractor's License Law does not apply to an owner of properly who
builds or irproves thereon and who does such work himself or through his own employees,
provided Onat such improvements are not intended or offered for sale. ff, however, the budding
or improvement is sold within one year of completion, the owner -budder wil have the burden
ofproving Ifiat he did not build or improve for the purpose of sale.)
❑ I, as owner of the property, am exclusively contracting with licensed contractors to con-
struct the project. (Sec. 7044, Business and Professions Code: The Contractors License Law
does not apply to an owner of property who builds or improves thereon, and who contracts for
such projects with a contractor(s) licensed pursuant to the Contractor's License Law.)
❑ 1 am exempt under Sec. B. & P.C. for this reason
Date Owner
WORKERS' COMPENSATION DECLARATION
I hereby affirm that I have a certificate of consent to self -insure, or a certificate of
Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.)
Policy No Company
4S Copy is filed with the city. ❑ Certified copy is hereby furnished.
CERTIFICATE OF EXEMPTION FROM
WORKERS' COMPENSATION INSURANCE
(This section need not be completed if the permit is for one hundred dollars ($100) vahiation
or fess.)
I certify that in the performance of thg work for which this permit is issued, I shall not
employ any person in any manner so as to become subject to the Workers' Compensation
Laws of Cali omia.
Date Owner
NOTICE TO APPLICANT: ff, after making this Certificate of Exemption you should become
subject to the Workers' Compensation provisions of the Labor Code, you must forthwith
comply with such provisions or this permit shall be deemed revoked.
CONSTRUCTION LENDING AGENCY
1 hereby affirm that there is a construction lending agency for the performance of the
work for which this permit is issued. (Sec. 3097, Civil Code.)
Lenders Name
Lender's Address
This is abuilding permit when properly filled out, signed and validated, and is subject to
expiration it work thereunder is suspended for 180 days.
I certify that I have read this application and state that the above information is correct.
1 agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives -of this city to enter the above-.
mentioned property for inspection purposes.
Signature of applicant -Date-
Mailing
ateMailing Address
City, State, Zip
Sq. Ft. 1373 No.
Size Stories
No. Dw.
Units
New ❑ Add ❑ Alter ❑ Repair ❑ Demolition ❑
Permit includes block wall --- Pool
)ermi.t to be obtained aeparatel
IEstimated Valuation 90, 329.90
PERMIT
Plan Chk. Dep.
Plan Chk. Bal.
Const.
Mech.
Electrical
Plumbing
S.M.I.
Grading
Driveway Enc.
Infrastructure
Precise Plan
TOTAL
REMARKS
AMOUNT
508.36
599.00
55.50
120.76
144.00
9.10
20.00
.00
1808.19
25.00
ZONE: BY:
Minimum Setback Distances:
Front Setback from Center Line
Rear Setback from Rear Prop. Line
Side Street Setback from Center Line
Side Setback from Property Line
FINAL DATE INSPECTOR
Issued by: Date Permit
Validated by:
Validation:
CONSTRUCTION ESTIMATE
NO. ELECTRICAL FEES
NO. PLUMBING FEES
1ST FL. SO. FT. ® $
2ND FL. SO. FT.
POR. SO. FT. ®
GAR. SO. FT. ®
CAR P. SO. FT.
WALL SO. FT. ®
SO. FT. ®
ESTIMATED CONSTRUCTION VALUATION $
UNITS
MOBILEHOME SVC.
POWER OUTLET
s
YARD SPKLR SYSTEM
BAR SINK
ROOF DRAINS
DRAINAGE PIPING
DRINKING FOUNTAIN.
URINAL
WATER PIPING
NOTE: Not to be used as property tax valuation
/
FLOOR DRAIN
MECHANICAL FEES
WATER SOFTENER
VENT SYSTEM FAN EVAP.COOL HOOD
SIGN
WASHER(AUTO)(DISH)
APPLIANCE DRYER
ROUGH WIRING
GARBAGE DISPOSAL
FURNACE UNIT WALL FLOOR SUSPENDED
ROCK STORAGE
LAUNDRY TRAY
AIR HANDLING UNIT CFM
METER LOOP
KITCHEN SINK
ABSORPTION SYSTEM B.T.U.
TEMP USE PERMIT SVC
WATER CLOSET
COMPRESSOR HP
POLE, TEM/PERM
LAVATORY
HEATING SYSTEM FORCED GRAVITY
AMPERES SERV ENT
SHOWER
BOILER. B.T.U.
SO. FT. ® c
BATH TUB
FINAL INSP.
SO. FT. ® c
WATER HEATER
MAX. HEATER OUTPUT, B.T.U.
SO. FT. RESID ® 11/4 c
SEWAGE DISPOSAL
GRADING
cu. yd.
$ plus x$
SO.FT.GAR ® 3Ac
HOUSE SEWER
FINAL INSP. ( (
GAS PIPING
PERMIT FEE
PERMIT FEE
PERMIT FEE
DBL
TOTAL FEES
MICRO FEE
MECH.FEE PL.CK.FEE
CONST. FEE ELECT. FEE
SMI FEE PLUMB. FEE
STRUCTURE PLUMBING ELECTRICAL HEATING & AIR COND. SOLAR
SETBACK
GROUND PLUMBING
UNDERGROUND
A.C. UNIT
COLL. AREA
SLAB GRADE
/
ROUGH PLUMB.
BONDING
HEATING (ROUGH)
STORAGE TANK
FORMS
SEWER OR SEPTIC TANK
ROUGH WIRING
DUCT WORK
ROCK STORAGE
FOUND. REINF.
GAS (ROUGH)
METER LOOP
HEATING (FINAL)
OTHER APPJEOUIP.
REINF. STEEL
GAS (FINAL)
TEMP. POLE
000
L
GROUT
WATER HEATER
SERVICE
FINAL INSP.
BOND BEAM
WATER SYSTEM
GRADING
cu. yd.
$ plus x$
_$
LUMBER GR.
FINAL INSP. ( (
FRAMING C(
/
/,/ ( XC
`[(((
FINAL INSP.
ROOFING
L Z
Yy ,_ w/G O `l f fO
a -. l (l( t 0 G'n
REMARKS:
VENTILATION
FIRE ZONE ROOFING
FIREPLACE
SPARK ARRESTOR
GAR. FIREWALL
H NI G
MESH
INSULATIONISOUND
FINISH GRADING
FINAL INSPECTION I a
CERT. OCC.
FENCE FINAL
INSPECTOR'S SIGNATURES11NITIALS
GARDEN WALL FINAL
DESERT SANDS UNIFIED SCHOOL DISTRICT
82-879 Highway 111
NOTICE: Indio, CA 92201
Document Cannot Be Duplicated (619) 347-8631
Date 9/24/92 Type of Permit I La Quinta
No. 11742 Permit #
Owner Name Suncrown Corporation Log #
No. 77545 street Madrid
city La Quinta zip 92253 Study Area 110
APN # I Tract # I Lot # Square Footage 11373
Type of Development Single Family Residence No. of units 0
Comments
At the present time, the Desert Sands Unified School District does not collect fees on
garages/carports, covered patios/walkways, residential additions under 500 square feet,
detached accessory structures or replacement mobilehomes. It has been determined
the above-named owner is exempt from paying school fees at this time due to the
following reason:
EXEMPTION NOT APPLICABLE
This certifies that school facility fees imposed pursuant to Government Code 53080
in the amount of 11.58 1 X 1373 or$ 2,169.34 have been paid to D.S.U.S.D. for
the property listed above and that building permits and/or Certificates of Occupancy for
this square footage in this proposed'project may now be issued.
Fees Paid By Suncrown Corporation Telephone 564-5231
Name on the check
By James E. Lively
Assistant Superintendent, Business Services
1 , ,
Fee collected /ex . pted by Shelley D. Bennett
Payment Receivs" n, '''= r
Signature/-7)Wh,y,./) 4 _Check No. ? J22w
Collector: Attach a copy of county or city plan check application form to district copyfor all waivers '
Copy Applicant/Receipt t CoPY-AccountingEmbossed Original- BuildingDept./Applicant c4'C^'' F""
CALVIN C. KAMINSKAS
Assistant Commissioner
(714) 275-3000
OFFICE OF
AGRICULTURAL COMMISSIONER
JAMES O. WALLACE, Commissioner
83-612 Avenue 45 Suite 7
Indio, CA 92201
619 342 8291
DAN RILEY
Sealer, Weights & Measures
(714) 275-3030
-
)_9z
DATE _ _ d
l CASE NO.
DEVELOPER'S NAME: S k", Cr
ADDRESS: U D oX 0 Ll
L . Q
CA 1,2 s
TELEPHONE (L OI) S to - ( f
Dear Developer:
After reviewing your landscaping plans, all plant material listed is not in
violation of quarantine laws governing the Coachella Valley: If substitutions
do occur and they differ from plant material listed, this .office must be notified
immediately.
Thank you for protecting and preserving the Coachella Valley's pest -free environment.
Agri 1 ural Commission is Office
cc: Indio and Riverside
4080 LEMON STREET, ROOM 19, RIVERSIDE, CALIFORNIA 92501 —FAX (714) 275-3012
0
TihfCvQumm
78-105 CALLE ESTADO LA QUINTA, CALIFORNIA 92253 - (619) 564-2246
FAX (619) 564-5617
July 28, 1992
Suncrown Corporation
Mr. Larry Shields
PO Box 804
La Quinta, CA 92253
Dear Mr. Shields:
Subject:
Setback Adjustment: 92-124
Locat.i.on_ Cove
77-545 Calle Madrid
APN: 774-243-012
This letter is'to report approval of your recent- application for a
setback adjustment, pursuant to Chapter 9.188 of the City of La
Quinta Planning & Zoning Regulations. The following setback
adjustment has been approved subject to conditions and in accordance
with attached Exhibit A.
SETBACK ADJUSTMENT:
Five foot setback reduced to three feet (rear yard)
FOR: Swimming Pool
CONDITIONS•
1. The applicant shall comply with Municipal Code Fencing
requirements for pools.
2. Ensure pool is reinforced to Building -Code requirements.
3. This setback adjustment does not apply to mechanical pool
equipment.
4. Pursuant to GTE requirements a three inch PVC conduit,
schedule 40 or better, shall be placed within the rear yard
5 -foot wide easement .area. This would facilitate their
accessing the area in the future, should the need to replace
the facilities arise. This conduit is to be capped off within
five feet of the side property lines, and should be placed at
a minimum depth of thirty inches.
After review it was determined that: RECEIVED
1. This adjustment is consistent with the intent an of
of
the zoning ordinance. BUILDING &SAFMyDEPT.
MAILING ADDRESS -.P.O. BOX 1504 - LA QUINTA, CALIFORNIA 92253
LTRGT.130/CS -1-
4 2. There are special circumstances applicable to the property,
including such factors -as size, shape, topography, location or
surroundings that justify approval of the adjustment. These
special circumstances are: this lot has limited space for a
pool in the rear yard and the recreational facilities will not
affect any of the existing public utility easements.
3. This adjustment will not be detrimental to the health, safety,
and general welfare of the community or be detrimental to
property in the vicinity of the parcel for which the
adjustment is requested.
If you have any questions, please contact the undersigned.
Very truly yours,
JE HERI
PL NG & ,PEVELOPMENT DIRECTOR
Gregf Trousdell
Associate Planner
GT: ccs
Attachment: Exhibit A
cc: Building &-Safety-Department
LTRGT.130/CS -2-
EXHIBIT
CASE NO. a'
cuffs t A L
�1 0Ak�/
%ziy,rt
of (19'rr-r-t-
lq�
(�Iit�r
of 14a (Quinta
rznb s�5''afet� 3441irAlln
This Certificate issued pursuant to the requirements of Section 306 of the Uniform Building
Code certifying that at the time of issuance this structure was in compliance with the various
ordinances of the City regulating building construction or use. For the following:
BUILDING ADDRESS 77-545 CALLE MADRID
Use Classification SINGLE FAMILY DWELLING Bldg. Permit No. 11364
Group R3 Type Construction VN Fre Zone Use Zone SR
Owner of Building SUNCROWN CORPORATION Address P. 0. BOX 804
City LA QUINTA, CA 92253 LONNIE DAY
Building Offic
Dy.
Date; DECEMBER 24, 1992
POST IN A CONSPICUOUS PLACE
o';
�3
6
^
TITLE 24 REPORT FOR:
SUNCROWN DEVELOPMENT
77-545 CALLE MADRID
LA QUINTA, CALIFORNIA
PROJECT DESIGNER:
OWNER:
^
REPORT.PREPARED BY:
JOHN H HACKER AN[Y ASSOCIATES
4501 E SUNNY DUNES ROAD SUITE D
' PALM SPRINGS CA 92264
619 327-4565 CA LICENSE RCE14614
Job Number:
Date: 9/23/1992
'
Tho COMPLY 24 computer program xas been used to perform the calculations
;ommarized in this compliance report. This program has intekim approval
and -is authorized by the California'Energy Commission for use with the
Second Generation Nonresidential Building Energy Efficiency Standards
ior Nonresidential Occupancies. Secohd Generation Residential Occupanciws
shown to comply with this program conf9rm to the results produced by the
Public Domain Point System, ueveloped by the California Energy Commission.
This program developed by Gabel Dodd Associates (415) 428-0803.
'
F> I
Table Of Contents iur Title 24 Report
--------------------------------------
Cover
------------------------------------
Cover Page .......................'...........'...................... 1
Table of Contents ''.''..''.'''..'..,...'..'....''''.'''''''.''...''' 2
Form CF -1R Certificate of Compliance: Residential .'.........''..... 3
Form MF -1R Mandatory Measures Checklist: Residential ''.'.'''..'.'... 6
Form p -2R Point System Summary '......'.''''.....................'.... 8
Form WS -4 HVAC System
' Summary Sheets .......... ;..................... 9
Form CF -4 HVAC Summary .................. ............................ 11
Form WB -1R Points Thermal Mass Worksheet ............................ 17
AVAC Zone & Space Loads Summary .............'....................... 18
Domestic Hot Water Worksheet ......................................... 21
Form -WS -5A Lighting Controls Credit Worksheet ....................... 22
-
o
/
CERTIFICATE OF COMPLIANCE: Residential(part 1 of 3) CF -1R page 3 of 22
Project: SUNCROWN DEVELOPMENT 1 COMPLY 24. v 3.2(1)
Mslgner' Buildinc_� Permit No
------------------
Location:
— ------
Location: Indio Date: 9/23/1992 Checked By
Documentation: JOHN H HACKER AND ASSOCIATES Date :User # 2655.)
_--------------------------------------------------------------------------
PROJECT ADDRESS
/7-545 CALLS MADRID
LA OUINTA, CALIFORNIA
GENERAL INFORMATION
Compliance Method:
Climate Zane:
Total C� �nditioned Floor Area:
Bdilding Occupancy:
Front Entry Orientation:
Number of Dwelling Units:
Floor Construction Type:
Infiltration Control:
BUILDING SHELL INSULATION
CompQnent Area
R-19 Frame Wall 920
R-38 Root/Gyp Ceiling 1373
Exposed Slab 250
C=arpeted Slob 1123
Job #:
Point System
15
1373 sqf t
Single Fam Att
East
1
Slab
Standard
U -Value Location/Comments
------- ------------------------------------
0. (1655 WHOLE HOUSE
0.0288 WHOLE HOUSE
0.9000 WHOLE HOUSE / I nsu l = R-0.0
0.7200 WHOLE HOUSE /Insul= R-0.0 .
THERMAL MASS Thick
Mass Material Area (in) Type Location/Description
--------------------- ----- ------------ ------------------------------
Concretc_, Heavyweight' 250 4.000 Exposed WHOLE HOUSE /Int Plass
Concrete, Heavyweight 113 4.000 Covered. WHOLE HOUSE /Int Mass
t
CERTIFICATE OF COMPLIANCE: Residential (part 2 of 3) CF -1R page 4 of 22
•-----------------------------------------------------------------------------
Projeact: SUNCROWN DEVELOPMENT ! COMPLY 24 v 3.20
------------------
Pesigner: building Permit No
' ------------------
Location: Indio Date: 9/23/1992 Checked By
------------------
Documentation: JOHN H HACKER AND -ASSOCIATES 1 Date (User # 2655)
---------------------------------------------------------------------------
GLAZING Glass w/Int
Location Orient Area Type U -Val SC Shade Description
--------- ------ ----- ------ ----- ----- ----- -----------------------
WHOLE HOUSE
West 136.0 Doible 0.65 0.88 0.33 Double/Light blinds
East 66.0 Double 0.65 0.88 0.33 Double/Light Blinds
North 30.0 Double 0.65 0.83 0.33 Double/Light Blinds
South 28. G Double 0.65 0.83 0.33 Double/Light Blinds
SHADING (for Glazing above) Over
Location Exterior Device SC hang Framing Type
WHOLE HOUSE
50 % Bug Screen 0.84 6.0 Metal w/o Mullions
50 % Bug Screen 0.84 2.0 Metal w/o Mullions
50 % Bug Screen 0.84 2.0 Metal w/. � Mullions
50 % Bug Screen 0.84 2;0 Metal w/o Mullions
CERTIFICATE OF COMPLIANCE: Residential (part 2 of 3r CF -1R page 5 of 22
------------------------------------------------------------------------------
Project: SUNCROWN DEVELOPMENT COMPLY 14 v 3.20
------------------
'Designer: f Building Permit No
------------------
Location: India Date: 9/23/1992 1 Checked By
D� �cumentati� Win: JOHN H HACKER AND ASSOCIATES : Date (User # 655 )
--------------7------7-----------------------------------------------------
HVAC SYSTEMS' Minimum Output Duct Duct Manufacturer/M• Adel No.
System Type Efficiency Qtuhr Location RVal (car approved equal)
---------------------- ---------------------- ---- -----------------------
Heat Pump 6.600 HSPF 4;`00, Vent. Attic Space 5.2 Day&Night 542GN048-C
Air Cond 9.500 SEER 47500 Vent. Attic Space Day&Night 542GN048-C
Zone Furnace Max: 1.Q x C 30060 Btuh + (10 x 1373 sgft)] = 56927 Btuh
Cooling Exception: ______ CFM Cooling (see Lead Calcs) requires ...... Btuh
HOT WATER SYSTEMS Tani: Manufacturer/Madel No. # of Energy R--12
System Type Volume (or approved equal) Sys Credits Blanket
Electric Resistance 37.0 A.O.Smith DSL -040 (SE) 1 2805 Y
SPECIAL FEATURES/REMARKS (Add extra sheets if necessary)
COMPLIANCE STATEMENT
This Certificate of Compliance lists the building features and performance
specifications needed to comply with Title 24, Chapter 2-53 and Title 20,
Chapter 2 Subchapter 4, Article 1 of the California Administrative Cade.
This certificate has been signed by the individual with overall design
rewponsibili.ty 'and the building owner, -who shall retain a copy of it and
transmit the certificate to any subsequent purchaser of the building. When
this Certificate of Compliance is submitted for a single building plan to
ba built in multiple orientations, all building conservation features which
very are indicated in the Special Features/Remarks section.
DESIGNER
License No:
Signed: --------------------
............................
DOCUMENTATION AUTHOR
JOHN H HACKER AND ASSOCIATES
4501 E SUNNY DUNES ROAD SUITE D
PALM SPRINGS CA 92264
619 327-4505 CA LICTENSE RCE 14614 �y
Signed:-- ---(flaelkht-- ---- 11 T I�
(Date)
BUILDING OWNER
i
Signed: _'` �V �ti..�, C%t -
(Date).
ENFORCEMENT AGENCY
Name
Agency: ...........................
Telephone:
------------------------
Signed:_
--------------------�____:Date)
R
MANDATORY MEASURES CHECKLIST (phrt 1 of 2) MF -1R page 6 of 22
------------------------------------7---------------------------------------
Project: SUNCROWN DEVELOPMENT 1 COMPLY 24 v 3.20
-------------------
Designer:
_____Designer: Building Permit No
I ,
' ------------------
Location: Indi,_, Date: 9/2371992 Checked by
------------------
DocumentatiO: JOHN H HACKER AND ASSOCIATES Date (User # 2655)
---------------------------------------------------------------------------
NOTE: Lowrise residential buildings subject to the Standards -must contain
these measures regardless of the: compliance approach used. Items marked
with an asterisk: (*) may be superseded by more stringent compliance
requirements listed on the Certificate of Compliance. When this checklist
is incorporated into the permit documents, the features noted shall be
considered by all parties as binding minimum component performance
specifications for the mandatory measures whether they are shown elsewhere
in the documents or on this checklist only.
BUILDING ENVELOPE MEASURES
o Sec. 5350a'): Minimum ceiling_ insulation R-19
weighted ave=rage.
o Sec. 2-5352(b): Loose fill insulation manufacturers
labeled R -Value.
o Sec. 2-5352(c): Minimum wall insulation in framed walls R-11
weighted average - (does not apply to exterior mass walls) . �
o Sec. ....-5352 ) : Slab edge insulation - water absorption rate
no greater than 0.3%, water vapor transmission rate no
greater than 2.0 p rm/inch.
o Sec. -5311: Insulation specified or installed meets
California Energy Commission (CEC) quality standards.
Indicate type and form.
o Sec. 2-5352(f): Vapor barriers mandatory in Climate Zones 14
and 16 only.
c, `:.pec. 2-5317: Infiltration/E:xfiltiation Controls
a. Doors and windows between conditioned and unconditioned
spaces designed to limit air leakage.
b. Doors and windows certified.
c. Doors and windows weatherstripped; all joints and
penetrations caulked and sealed.
o Sec. 2-5352(e): Special infiltration barrier installed to
comply with Sec. 2-5351 meets CEC quality standards.
o Sec. 2-5352(d): Installation of Fireplaces
1. Masonry and factory -built fireplaces have:
a. Tight fitting, closeable metal or glass door
b. Outside air intake with damper and control
c. Flue damper and control
2. No continuous burning gas pilots allowed.
Enforcement
0
MANDATORY MEASURES CHECKLIST (part 2 of 2:► MF -1R page 7 of 22
Project: SUNCROWN DEVELOPMENT COMPLY 24 v 3.20
Pesigner: 1 Building Permit N
' ------------------
Location: Indio Date: 9/23/1992 Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES Date (User # 2655)
------------------------------------- -------------------------------------
HVAC AND PLUMBING SYSTEM MEASURES Enforcement
o Sec. 2-5352(g) and 5302: equipment
Space conditioning eq p
sizing: attach calculation -----------
o Sec. 2-5352(h) and 2-5315: Setback: thermostat on all
applicable heating systems. -----------
o Sec. 2-5316(a): Ducts constructed, installed and insulated
per Chapter 10, 1976 UMC. *
ii Sec. 2-5316(b): Exhaust systems have damper controls; -----------
o 'Sec. 2-5314(c): Gas-fired space heating equipment has
intermittent ignition devices.
o Stec. ::-5314: HVAC equipment, water heaters, showerheads and
faucets certified.by the CEC.
-----------
o Sec. 2-5352(i): Water heater insulation blanket (R-12 or
greater> for Storage & backup tanks for solar water Beating
systems; first 5 feet of pipes closest to tank insulated
(R-3 or greater) .
o Sec. 5312(Exception I): Pipe insulation on steam and steam
condensate return & recirculating piping. _____------
o Sec. 2-5318(d): Swimming Pool Heating
1. System has:
a. On/off switch on heater.
b. Weatherproof instruction plate on heater.
c. Plumbed to allow for solar.
__. 75 percent thermal efficiency.
Pool cover.
4. Time clock:.
5. Directional water inlet. - ---------
,LIGHTING AND APPLIANCE= MEASURES
o Sec. 2-5352(j): Lighting - 25 lumens/ watt or greater for
general .lighting in kitchens and bathrooms.
Sec. -5314(c): Gas fired appliances equipped with
intermittent ignition devices.
o Sec. 5314(a): Refrigerators, refrigerator -freezers,
freezers and fluorescent lamp ballasts certified by the GEC.
Indicate make and model number.
POINTS SYSTEM SUMMARY: CLIMATE ZONE 15 P -2R page 8 of
Project: SUNCROWN DEVELOPMENT 1 COMPLY 24 v 3.20
------------------
Designer: Building Permit No
' =-----------------
Location: India Date: 9/23/1992 Checked By
Documentation: JOHN H HACKER AND ASSOCIATES 1 Date (User # 2655)
------------------------------------------------------------------=---------
BUILDING DATA
-------------
Conditioned
Floor Area.
1373
sgft
Number of
Stories
1
Occupancy
Type
S.Ingle
Fam Att
SCORE..CARD
--------------------------
Measure
Points
1.
Roof Insulation
-------
0.0288
CU -Value?
------
0
2.
Wall Insulation
0.0655
(U -Value:)
0
3.
Raised Floor Insulation
0.0000
(U -Value)
3a.
Controlled Vent Crawls.pace
0.0
(R -Value)
1_>
C�
4.
Slab Edge Insulation
0.7776
M factor),!
5.
Infiltration
Standard
0
6.
Glass Heat 'Lass
0.65
18.9%
-3
Sum 1-6
7.
Shade Open Area %-Gla__
Eff
a.
North 30,0
2.2
-SC-
x 0.74
-OH-
=
-%
1.6
0
b.
East 66.0
4.8
x 0.74
x 0.88 =
3.2
-1
c.
South 28.0
2.0
A 0.74
x 0.03 =
1.3
d.
West 136.0
9.9
x 0.74
x 0.65 =
4.8
1
e.
Skylight 0.0
0,0
x 0.00
0.0
p
B.
Shade Closed Area %
Glass
SC
OH Eff
a.
North 3010
2.2
x 0.28
�• =
0.6
0
b.
East. 66.0
4.8
x 0.28
x 0.78 =
1 . 1
1
c:.
South 28.5
2.0
x 0.28
x 0.63 =
0.4
5
a.
West 136.0
9.9
x 0.28
x 0.54 =
1.5
-1
e.
Skylight 0.0
0.0
x 0.00
=
0.0
0
9.
Interior Thermal Maas
2.34
10.
Exterior Wall Maes
0.00
C)
Sum 7-1G
11.
Heating System 6.600
HSPF x 0.83
Duct Eff =
5.47
Eff
HSPF
Zonal Control: No
12.
Coling System 5.500
SEER
x 0.82
Duct Eff =
7.7.3
Eff
SEER
13.
Water -Heating (see DHW
Worksheet)
_
Point Total:
HVAC EQUIPMENT & ZONING SUMMARY FORM (part 1 of 2) CF -4 page 9 of 22
------=--------------------------------=------------------------------------
Project: SUNCROWN DEVELOPMENT- 1 COMPLY 24 v 3.20
------------------
Designer: 1 Building Permit No
1
Location: India Date: 9/23/.1992 Checked By
Documentation: JOHN H HACKER AND ASSOCIATES 1 Date (User # 265 5)
---------------------------------------------------------------------------
SYSTEM EQUIPMENT SUMMARY
No Heating Cooling
No System Name System Type Sys Output COP Output EER
----=----------------------------------- --- ------ ----- ------------
SYSTEM
----------SYSTEM FAN SUMMARY ( for Systems Above)
Min Supply Fan Return Fan Economizer
No Fan Type Ratio CFM BHP Eff CFM BHP Eff Type Temp
----------------- ----- ----- ------ ---- ----- ------ ---- ---- ----
HVAC EQUIPMENT & ZONING SUMMARY FORM (part 2 of 2) CF -4 page 10 of22
---------------------------------------------------------------------------
Project: SUNCROWN DEVELOPMENT COMPLY 24 v 3.20
Designer: Building Permit No
------------------
Locat.ion: India_. Date: 9/23/1992 1 Checked By
Documentation; JOHN H HACKER AND ASSOCIATES : Date (User # 2655)
----------------------------------------------------------------------------
SYSTEM/ZONING SUMMARY
N
Z� �ne/Spaces Served Central/Zonal System System Type Sys
--------------------------- ----------------------------------------- ---
0
-CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 11 of 22
------------------------------------------------------------------------
Project: SUNC:ROWN DEVELOPMENT 1 COMPLY 24 v 3.20
Designer: Building Permit No
------------------
Loc._;tion: Indic, Date: 9/23/1992 Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES Date (User # 2655)
-----------------------------------------------------------------------------
Assembly Name: R-19 Frame Wall
Assembly Type: Wall
Assembly Tilt; 90 deg (Vertical:)
Framing Percentage: 15.0
'Framing Material: Softwood,
i
r '
Sketch of Construction Assembly
Absorptivity:
Roughness:. Stucco,
Weight:
Heat Capacity:
Dodglas Fir -Lerch
�lX
Calculation for Framing Adjustment
Summer U -Value
0.0515 % O. G5 + 0.1416 x 0.15 = 0.065()
065()
Winter U -Value
0.0517 x 0.85 + 0.1433 x 0.15 = O. OE55
OVERALL_ VALUES ADJUSTED FOR FRAMIQ
Wood Shingles
13.' lb/sgft
3.Irl
R -Value
15. 38 15.28
U -Value 0.OE50 0.0655
Th
R -Value
Construction Components
Fr (in)
Summer
Winter
- - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - -- - - - - - - - - - -
- - - - - - -
Outside Air Film
0.25
0.17'
1. Stucc=o
0.875
0.17
0.17
2. Me=mbrane, Vapor -Permeable Felt
0.010
0.06
0.06
3. .Insulation, Mineral Fiber, R-17.0
* 5.500
17.80
17.80
4. Gypsum or Plaster Board
0.500
0.45
0.411;
5.
FJ•
7.
8.
9.
Inside Air Film
------------2------=-------------------------------------------------------
0.68
0.E8
Total
19.42
19. 33
Framing Percentage: 15.0
'Framing Material: Softwood,
i
r '
Sketch of Construction Assembly
Absorptivity:
Roughness:. Stucco,
Weight:
Heat Capacity:
Dodglas Fir -Lerch
�lX
Calculation for Framing Adjustment
Summer U -Value
0.0515 % O. G5 + 0.1416 x 0.15 = 0.065()
065()
Winter U -Value
0.0517 x 0.85 + 0.1433 x 0.15 = O. OE55
OVERALL_ VALUES ADJUSTED FOR FRAMIQ
Wood Shingles
13.' lb/sgft
3.Irl
R -Value
15. 38 15.28
U -Value 0.OE50 0.0655
CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 12 of 22
------
Project: SUNCROWN DI:=VEL`OPMENT 1 COMPLY 24 v 2.20
--------•----------
Designer: [:wilding Permit No
------------------
Lcfcati� gin: Indio Date: 9/23/4992 Checked By
------------------
D� �cumentatif gin: JOHN H HACKER AND ASSOCIATES Date (User # 265 5)
-----...----------------------------------------------------------------------
Assembly Name: R-33 Roof/Gyp Ceiling
Assembly Type: Roof
Assembly Tilt: 0 deg (Horizontal Roof)
Framing Percentage: '10.0.7
Framing Material: Softwood, Douglas Fir -Larch'
-------------------------------
I ;f
1 f
f
f I
f f
f
1
1 ;
f f
f
f f
I
f
I f
I ;
I
I
I f
f 1
1 ;
f
Sketch of Eonstruction Assembly
Calculation for Framing Adjustment
Summer U -Val f_ce
0.0241 x 0.90 + 0.06EB x 0.10 = 0.0283
Winter U -Value
0.0242 ,; 0.90 0 + 0.0690 90 0.10 = 0. 0288
OV'RhL VALUES ADJUSTED FOR FRAMING
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 9.6 lb/sqft
Heat Capacity: 3.11
R -Value
35.30 34.74
U -Value 0.0283. 0283 0.0288
Th
R -Value
Construction Ccfmp.f_fnGnts
Fr (in)
Summer
Winter
------------------------7--------------------------------------------------
Outside Air Film
0.25
0.17
1. Rl 11 ff ing, Built -Up
0.375
0.33
0.33
Plywood
0.500
0.63
0.63
3. Air Space
12.000
1.00
0.93
J
4. Insulation, Mineral Fiber, R-38
11.500
3I:.00
33.00
5. Gypsum or Plaster Beard
0,500
0.45
0.45
6.
f
7.
13.
J .
Inside Air Film
0.92
0461
.
Total
41.58
41.1
Framing Percentage: '10.0.7
Framing Material: Softwood, Douglas Fir -Larch'
-------------------------------
I ;f
1 f
f
f I
f f
f
1
1 ;
f f
f
f f
I
f
I f
I ;
I
I
I f
f 1
1 ;
f
Sketch of Eonstruction Assembly
Calculation for Framing Adjustment
Summer U -Val f_ce
0.0241 x 0.90 + 0.06EB x 0.10 = 0.0283
Winter U -Value
0.0242 ,; 0.90 0 + 0.0690 90 0.10 = 0. 0288
OV'RhL VALUES ADJUSTED FOR FRAMING
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 9.6 lb/sqft
Heat Capacity: 3.11
R -Value
35.30 34.74
U -Value 0.0283. 0283 0.0288
CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 13 of 22
Project: SUNCROWN DEVELOPMENT 1 COMPLY 24 v 0.20
Designer: V Building Permit No
1 - I
I ------------------
Location: Indio Date: 9/22/1992 1 Checked By
--------------
Documentation: JOHN H HACKER ANI) ASSOCIATES Date (User # :655)
---------------------------------------------------------------------------
Ass ;t_ir bly Name: Carpeted Slab
Assembly Type: Floor
Assembly Tilt: 180 deg (Horizontal Floor)
Framing Percentage: ' 0.0
.Framing Material: NONE
OV,ERALL VALUE=S ADJUSTED FOR FRAMIOG
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sgft
Heat Capacity: 9.01
R -Value
3.22
n.ry . 3J.45
U -Value 0.3106 0.2899
Th
R -Value
Construction Components
-- ---------------------- �---------•--------
Fr (in)
---------------------------------
Summer
Winter
Outside Air Film
0.25
0.17
1. Concrete, 140 lb, . Not Dried
3.500
0.28
0.28
2. Flooring, Carpet and Fibrous Pad
3
0.250
2.08
2.08
4.
5
7.
S. .
Inside Air Film
-------------------•--------------------------------------------------------
0.61
0.132
•
l otal
3.22
3.45
Framing Percentage: ' 0.0
.Framing Material: NONE
OV,ERALL VALUE=S ADJUSTED FOR FRAMIOG
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sgft
Heat Capacity: 9.01
R -Value
3.22
n.ry . 3J.45
U -Value 0.3106 0.2899
22
CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 14 of
------------------- ---------------
Project: SUNCROWN DEVELOPMENT COMPLY 24 v 3.20
------ --- -----
De•_igner: Building Permit No
------------------
Locat.ion•. Indite, Date: 9/3/1992 1 Checked By
' ------------------
Documentation: JOHN H HACKER AND ASSOCIATES : Date (User ## 265 5)
Assembly Name: Exposed
Slab
Assembly Type: Floor
Assembly Tilt: 180 deg
(Horizgntal Floor)
Th
R -Value
Construction Components
Fr (in)
Summer
Winter
-----------------------0----------------------------------------=-----------
Out=side Air Film
0.25
0.17
1. Concrete, 140 lb,
Not Dried
3.506
0.2e
0.28
2. F1ooring, Asphalt,
3.
rt
Lines:, Vinyl or Rubber
0..010
0.05
0.05
.
L
7.
B.
9.
Inside Air Film
--------------------------------------------------
0.61
��' �"
Total
1.19
1.4
Framing Percentage:
Framing Material: NONE
-------------------------------
----------------------------
Sk:et ch of Construction Assembly
OVERALL VALUES ADJUSTED FOR FRAMAG
Abs;rptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sgft
Heat Capacity: 9.00
R -Value 1.19 1.42
U -Value 0.8403 0.7042-
Absorptivity:
.704 .
CONS"iRUCTION ASSEMBLY COMPLIANCE FORM CF page 15 of 22
Pro.ject: SUNCROWN DEVELOPMENT 1 COMPLY 24 v 3.20
Designer: Building Permit No
------------------
Location: Indio Date: 9/23099:' Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES Date(User 14 655)
A=ssembly Nampa! Solid Wood Door
Assembly Type: Doer
Assembly Tilt: 90 deg (Vertical)
Framing Percentage: 0.0 Z
.Framing Material: NONE
-------------------------------
,
,
,
,
-- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sketch of Construction Assembly
Absorptivity:
Roughness: Clear Pine
Weight:
Heat Capacity:
0. 70
Total 2.66
2. 58
OVF=RALL VALUES ADJUSTED FOR FRAMING
R -Value 2.66 2.58
5.1 lb/sqft
1.99
U -Value 0.9756 0.387
Th
R -Value
Construction Comp mints
Fr (in)
Summer
Winter
-----------------------------------------------
- - _ - - - - - - - - - - - - - - - - - - - - - T ------------------------------------------------
Outside
Outside Air Film
0.25 0.17
1. Softwood, Douglas Fir -Larch
2.
1.750
1.73
1.73
4.
C
5.
G.
7.
o . .
Inside Air Film
-------------------------------------------=-------------------------------
0.68
0.68
Framing Percentage: 0.0 Z
.Framing Material: NONE
-------------------------------
,
,
,
,
-- - - - - - - - - - - - - - - - - - - - - - - - - - - -
Sketch of Construction Assembly
Absorptivity:
Roughness: Clear Pine
Weight:
Heat Capacity:
0. 70
Total 2.66
2. 58
OVF=RALL VALUES ADJUSTED FOR FRAMING
R -Value 2.66 2.58
5.1 lb/sqft
1.99
U -Value 0.9756 0.387
CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 16 of 22
----------------------------------
Projr_ct: SUNCROWN DEVELOPMENT :.COMPLY 24 v 3.20
Designer: : Building Permit No
------------------
Location: Indic. Date: 9/23/1992 : Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES : Date(User 4 655)
1 -
Assembly Name: Double/Light Blinds
Assembly Type: Glazing
Th R -Val L)e
Construction Components Fr (in) Summer Winter
------------------------------------------------------------7--------------
Outside Air Film 0.25 0.17
1. CEC Double Glazing 0.500 0.69
2.
a.
J.
G..
7.
Inside Air Film 0.68 O.68
--------------------------------------------------------- -----------------
Framing Percentage: 0.0 %
Framing Material: NONE
-------------------------------
-------------------------------
Sketch of Construction Assembly
Winter Shading Coefficient: 0.88
Sumner Shading Coefficient: 0.33
Total 1.62 1.04 -
OVERALL VALUES ADJUSTED FOR FRAMING
R -Val sae 1.62 1.54
U -Value 0.6179 0.6500 .
THERMAL MASS WORKSHEET
---------------------------------------------------------------------------
WS -1R page
17 of 22
Pro ject: SUNCROWN DEVELOPMENT
COMPLY 24
v 3.20
D;signer:
1
------------------
Building Permit
No
Location: India
Date: 9/23/092
ChTO-d Ery
Documentation: JOHN H
---------------------------------------------------------------------------
HACKER
AND ASSOCIATES
Date (User
4# �F,5 :)
INTERIOR THERMAL MA&S
Interior
Interior
Sides
Wall Mass
Mass
Mass
Mass Material
Thick
Exposed
U -Value Area
Fatter
Capacity
------ = ---------------
- - - - -
- - - - - - -
- - - - - - - ------
--------
--------
-------
Concrete,
Concrete, Heavyweight -
4.00
1
250.0
x 4.7.=
1175.0
Concrete, Heavyweight
4.00
0
1123.0
x 1.8 =
2043.9
'
TOTAL
3218.9
INTERIOR MASS FACTOR 3213.9 IMC / 1070 sgft = 2.34
Mass listed above with a Wahl U -Value denotes the Interior Mass credit
for Exterior Masi:; Walls, and are repeated below for Exterior Mass credit.
0 SiJe_. Exposed indicates mass covered with surface material >= R
E=XTERIOR MASS WALLS Exterior Exterior
" Sides Wall Mass Mass Mass
Mass Material Thick Exposed U -Value Area Factor Capacity
NONE
-IVAC ZONE HEATING & COOLING LOAD SUMMARY page 18 of 22
------------------------------------------------------------------------------
Pro.ject: SUNCROWN DEVELOPMENT COMPLY 24, v 3.20
------------------
Des•.igner: Building Permit No
Location: India Date: 9/23/199 ------------------
� L'h�eck:ed Ey
Donumentation: JOHN H HACKER AND ASSOCIATES Date (User # 2655)
----------------------------------------------------------------------------
HVAC ZONE DESCRIPTION
;-HVAC Zone Name:
Heating System Name:
Coling System Name:
System Multiplier:
Heating Schedule: ,
Cooling Schedule:
Fan Schedule:
Peak Lead Method:
Relative Humidity:
SPACES IN THIS ZONE PEAK
WHOLE HOUSE (Jai 12am)
TOTAL SPACE LOAD
Supply Duct, Condgction
Supply Duct Leakage
Ventilation ( 0 cfm)
Return Air Lighting Gain
Return Dyct Conduction
Return Duct Leakage
Fan Motor Heat Gain
TOTAL. SYSTEM LOAD
HE4T I NG
28926
23':x26
1446
579
0
310
61 '�
-1819
30060
SYSTEM OUTPUT AT DESIGN CONDITIONS 31433 .
WHOLE HOUSE
Day&N i gh t- 542GN048 -C
Day&Night 542GN048-C
1
Residential Heating
Residential Cooling
Residential Occupancy.
COINCIDENT
50
.PEAK
(Aug 2pm)
0 cfmj
COOLING
SENSIBLE
23371
23371
1169
467
0
0
250
500
)
1819
27576
34026
LATENT
1030
1030
21
-0
1
1072
8756
NOTE: The TOTAL. SYSTEM LOAD shown represents the minimum size equipment
which will .heat or cool this zone during_ the design conditions indicated.
These numbers include: no safety factor, and the HVAC contractor should
oversize by a reasonable margin to account, for variations in weather '
conditions and the pick-up capacity required to bring the zone to temper-
ature as a result of a setback:: thermostat. These responsible for final
equipment selection should note thht Sensible and Latent Cooling Leads are
indicated to allow for accurate comparison with manufacturer's output data.
RESIDENTIAL SPACE HEATING LOAD SUMMARY page 19 of 22
Project: SUNCROWN DEVELOPMENT COMPLY 24 v 0.20
-------------------
Dysigner: Building Permit No
---- --------------
Locati gin: Indio Date; 9/20/1992 Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES 1 Date (User # 2655)
---------------------------------------------------------------------------
Space Name: WHOLE HOUSE
Design Indoor Dry Bulb Temperature:
Design Outdoor Winter Dry Bulb ,Temperature:
Design Temperature DifferencE:
Conduction
R-19 Frame Wall
Solid Wood Door
Double/Light Blinds
R Roof/Gyp •Ceiling
Exposed Slab
Carpeted Slab
Infittration: 1.00 x 0.018 x
70 F
29 F
41 F
Area
------
U -Value
-------
TD
----
Btu/hr
-------
920.0
;,
0.0655
x 41.0
- 2469
0.0
x
0.5872
x 41.0
= 018
60.0
x
0.6500
x 41.0
= 692'3
1375.0
x
0.0288
x 41.0
= 1620
Perim = 63.0
x
45
= 2709
Perim = 154.0
x
40
- 5762
1070 sgft x 9.0 ft x 1.00 AC x 41.0 - 9119
TOTAL HOURL`! HEAT LOSS FOR SPACE 28926
SUPPLY AIR QUANTITY
--------------------
Heating: 28926 Btu/hr / C1.10 * 605 F Supply - 65 F TStat)3 = 607 cfm
11,
RESIDENTIAL SPACE COOLING LOAD SUMMARY page 20 of 22
Project: SUNCROWN DEVELOPMENT ; COMPLY 24 v 0.20
------------------
Designer: ; Building Permit No
' ------------------
Lochtion: India, Date: 9/23/1992 ; Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES ; Date(User # 2655 )
--- ------------------------------------------------------------------------
Space Name: WHOLE HOUSE
Design Indoor Dry Bulb
Temperature:
78 F
Denign Outdoor Summer
Dry Rulb Temperature:
112 F
Des>ign Temperature Difference:
34 F
Conduc lon
Area
U -Value
DETD
Btu/hr
R-19 Frame Wall
920.0
x
0.0650 x
19.6 -
------
1771
Solid Wood Door
20.0
x
0.375 6, , x
29.E _
222
Double/Light Blinds
260.0
x
0.8179 x
04.0 =
548
R-38 Roof/Gyp Ceiling
1373.0
x
0.0283 x
50.0
1945
Infiltration: 1.00 x 0.013
x 1073
sqft x-9.0
ft x
1.00 AC x
04.0 =
756
"
Shaded
Unshaded
Solar- Gain
Orient.
Area SGF
Area SGF
SC
Btu/hr
Double/ Light Blinds!
West C
129.2.x 15
+
8.8 x 703
x 0.28
= 679
Double/Light Blinds
East C
24.8 x 15
+
41.0 x 703
x 0.28
= 943
Double/Light Blinds
Nort-h, C
0.0 x 15
+ -30.0
x 157
x 0.28
= 125-
Double/Light Blinds
South C
28.0 x 15
+
0.0 x 323
x 0.28'-
117
Internal Gain
-----------------------
Op Frac.
A--
Area
Heat Gain
Conv.
Btu/hr
Lighting
-----
1.00 .
------
x 1373.0
---------
x
0.500 x
-----
3.413 -
---7--
2343
Equipment
1.00
x 1370.0
x
0.250 x .
3. 410 - =
1172
Occupants
1.00
x 1373.0
!.
225 /
300 =
1030
TOTAL HOURLY
SENSIBLE.HEAT
GAIN FOR SPACE
23371
Latent gain
------------------------
Op Frac.
--------
Area
Heat
Gain
Conv.
Btu/hr
Equipment
1.00
------
x 1070.0
---------
x
0.000 x
-----
3.410 -
------
i)
Occupants
1.00
x 137a.0
22
_
30
TOTAL HOURLY
LATENT HEAT
GAIN FOR SPACE
1030
SUPPLY AIR,QUANTITY
-------------------
Cooling: 23371 Btu/hr' / 11.08 * A78 .F TStat - 55 F Supply)] _
941 cfm
_ DHW WORKSHEET ONE: STORAGE TYPE OAS OR ELECTRIC page 21 of 22
�
----------------- ------------------------
Project: SUNNOWN DEVELOPMENT | COMPLY 24 v 3.20
| .
__________________
Designer: Building Permit No
| ________—_________
Location: Indio Date: 9/23/^1932 | Checked By
| __________________
Documentation: JOHN H HACKER AND ASSOCIATES | Date (User # 2655)
___________________________________________________________________________
A EOUIPMENT DATA
1
Water heater type
SE
Enter SG or SE
2
Manufacturer &
Water heating budget
18700
3
Model number'
.
.
A.O.Smith DSE-040 (SE)
4
Ignition device .
IID
GP, gas pilot or IID, int. ignition device
5
Tank volume
37.0
Total gallons, from CEC Appliance Directory
6
Recovery efficiency
' 99.9
Percent from CEC Appliance Directory
7
Standby loss
0.8
Percent/hour, from CEC Appliance Directory
8
Rated input
40956
Btu/hr, from CEC Appliance Directory
0.0067
See Table 2 or
Appendix B
(1 kWh = 3413 Btu)
9
Number of Heaters
1
From building plans (total)
10
Insulation Jacket
Y
(Y/N) R-12 insulating jacket on the plAns
B OPERATING DATA
1
Glimate Zone
15
See Appendix D
2
Water heating budget
18700
KBtu/yr/unit,
see Table 1
3
Tank set temp.
140
F, fixed input
0.001 x A9 ~
4
Water main temp�
70.0
F, see Table 1
'
5
Daily hot water load
50
50 or 35 gallons/unit,
see Table 1
6
Ambient air temp.
72.6
F, see Table 1
,
7
Adj Standby Losses
0.0067
See Table 2 or
Appendix B
8
No. dwelling units
1
From building
plans (total)
9
Number of pumps
0
From building
plans
10
Pumping energy
0,0
Watt-hr/yr per
Pump, see Table 3-
C NATER HEATING ENERGY CREDITS
,-_-_------------_----_----------------------_------7----_---------------�--
1 Credit name See Table 5
2 Annual savings 2805.0 KBtu/yr/dwelJing unit, see Table 5
'
D CALCULATE -ANNUAL WATER HEATING ENERGY (KBtu/yr)
---------------------------------------------------------------------------
1 Recovery load 7734.4 {[B5 x 8.25 x(140-B4)x 365 x 0.001]-C2}x,B8
2 Recovery energy
7742.1
D! /
A6
3 Standby loss energy
1185.0
124
- [(D2 x 1000)/(A8 x A9 x
365)31 x 8.25
'
x A5
x B7 x 365 x (140-B6) x
0.001 x A9 ~
4 Pumping energy
0.0
B9 A
B10 x 3.413 x 3 x 0.001
'
5 Total energy
26781.3
GAS
SYSTEMS: (D2 + D3 + D4)
/ B8
ELECTRIC: {[(D2 + D3) x 33 + D41 / B8
6 Water heating budget
comparison -8031.3 KBtu/yr/unit B2 - D5
7 Water heating budget -11.8 Points 7D6. / Floor Area) x 2 x B8
'
•LIGHTING CONTROLS CREDIT WORKSHEET WS -5.A page 22 of 22
--------------------------------------------------------------------------
Project; SUNCROWN DEVELOPMENT COMPLY 24 v 3.20
Dluigner: Building Permit No
' ------------------
Loca+tion: Indic.. Date:. 9/23/1992 Checked By
------------------
Documentation: JOHN H HACKER AND ASSOCIATES l Date (User # 2655 )
---------------------------------------------------------------------------
L I GHT I t' G CONTROLS BY SPACE
Floor
Space Name Co trQI Description Area Watts Adj. Credit
TOTAL o
0