BSIG2014-102478010 Main St Ste 108
BSIG2014-1024
z
78-495 CALLE TAMPICO • D O. i
LA QUINTA, CALIFORNIA 92253 COMMUNITY DEVELOPMENT DEPARTMENT
BUILDING PERMIT
VOICE (760) 777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Application Number:
BSIG2014-1024
Owner:
Property Address:
78010 MAIN ST
OLD TOWN LA QUINTA LLC
APN:
770121008
78100 MAIN ST STE 206
Application Description:
SIGN FOR MORELIA FRUITS & MORE
LA QUINTA, CA 92253
Property Zoning:
Application Valuation:
$3,100.00
Applicant: D /1 Contractor:
SIGNARAMA SIGNARAMA
OUTSIDE CITY LIMITS OUTSIDE CITY LIMITS
LA QUINTA, CA 92253 OCT 2 9 20 .4 LA QUINTA, CA 92253
CITY OF LA QUINTA (760)776-9910
COMMUNITY DEVELOPMENT DEPARTMENT Llc. No.: :LIC -0004466
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: License No.: :LIC -0004466
Date:
Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3
of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars .
($500).:
(_ ) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
( ) I am exempt under Sec. . B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm -under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Na
Lender's
Date: 10/29/2014
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
Carrier: _ Policy Number: _
I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Date:
Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the above-
mentioned property for inspection purposes.
Date: Signature (Applicant or Agent):
FINANCIAL INFORMATION
DESCRIPTION ACCOUNT CITYAMOUNT
PAID
PAID DATE
BSAS SB1473 FEE 101-0000-20306 0
$1.00
$0.00
PAID BY METHOD RECEIPT #
CHECK #•
CLTD BY
Total Paid forBUILDING STANDARDS ADMINISTRATION BSA $1.00 $0.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
DEVICES, FIRST 20
101-0000-42403
0
$24.17
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
DEVICES, FIRST 20 PC
101-0000-42600
0
$24.17
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid for ELECTRICAL: $48.34 $0.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT;
PAID -
PAID DATE
WALL/AWNING SIGN, FIRST
101-0000-42404
0
$24.66
$0.00
PAID BY
METHOD'
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
WALL/AWNING SIGN, FIRST PC
101-0000-42600
0
$87.02
$0.00
PAID BY
METHOD
RECEIPT .#
CHECK #
CLTD BY
Total Paid forSIGN: $111.68 $0.00
TOTALS:0•
Description: SIGN FOR MORELIA FRUITS & MORE
Type: SIGN
Subtype: Status: SUBMITTED
Applied: 10/29/2014 MFA
Approved:
Parcel No: 770121008 Site Address: 78010 MAIN ST LA QUINTA,CA 92253
Subdivision: PM 30850
Block: Lot: 2
Issued:
Lot Sci Ft:.O
Building Sq Ft: 0 Zoning:
Finaled:
Valuation: $3,100.00
Occupancy Type: Construction Type:
Expired:
No. Buildings: 0
No. Stories: 0 No. Unites: 0
$1.00
Details: (2) CHANNEL LETTER LED SIGNS MORELIA'S FRUIT & MORE SIGN PERMIT NO. 20141024 MF 2010 ENERGY, 2013 CALIFORNIA
BUILDING CODES.
Total Paid forBUILDING STANDARDS ADMINISTRATION
CONTACTS
Printed: Wednesday, October 29, 2014 10:51:58 AM 1 of 2
SYSTEMS
ADDITIONAL
FINANCIAL•'
•
CHRONOLOGY
AMOUNT
PAID
CLTD
PAID DATE RECEIPT # CHECK # METHOD PAID BY
CONDITIONS
BY
BSAS SB1413 FEE 101-0000-20306 0
$1.00
$0.00
Total Paid forBUILDING STANDARDS ADMINISTRATION
CONTACTS
NAME TYPE
NAME
ADDRESSI '
CITY
STATE
ZIP PHONE FAX EMAIL
APPLICANT
SIGNARAMA
OUTSIDE CITY LIMITS
LA QUINTA
CA
92253
CONTRACTOR
SIGNARAMA
OUTSIDE CITY LIMITS
LA QUINTA
CA
92253
OWNER
OLD TOWN LA QUINTA LLC
78100 MAIN ST STE 206
LA QUINTA
CA
92253
Printed: Wednesday, October 29, 2014 10:51:58 AM 1 of 2
SYSTEMS
FINANCIAL•'
•
DESCRIPTION ACCOUNT QTY
AMOUNT
PAID
CLTD
PAID DATE RECEIPT # CHECK # METHOD PAID BY
BY
BSAS SB1413 FEE 101-0000-20306 0
$1.00
$0.00
Total Paid forBUILDING STANDARDS ADMINISTRATION
$1.00
$0.00
• BSA:
Printed: Wednesday, October 29, 2014 10:51:58 AM 1 of 2
SYSTEMS
Permit Details PERMIT NUMBER
City of La Quints BSIG2014=1024,`'°
a ,
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID -
PAID DATE
RECEIPT #
CHECK #
METHOD
PAID BY
CLTD
BY
DEVICES, FIRST 20
101-0000-42403
0
$24.17
$0.00
DEVICES, FIRST 20 PC
101-0000-42600
0
$24.17
$0.00 .
Total Paid for ELECTRICAL: $48.34 $0.00
WALL/AWNING SIGN,
101-0000-42404
0
$24.66
$0.00
FIRST
WALL/AWNING SIGN,
101-0000-42600
0
$87.02
$0.00
FIRST PC
Total Paid forSIGN: $111.68 $0.00
TOTALS:• • •0
PAnENT PnOJECTS
REVIFWS
REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED STATUS REMARKS DATE NOTES
BOND INFORMATION
Printed: Wednesday, October 29, 2014 10:51:58 AM 2 of 2 C
SYSTEh1S
#
Cit 'f. 'f LCA QUinlCi
Building 8E Safety Division
P.O. Box 1504,78-495 Calle Tampico
La.Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
ProjectAddress:. jID MA' -P 5-1—.Owner's
Name:.
A. P. Number:
Address: . ? k l D
Legal Description:
Contractor. M
City, ST, Zip: r ZZ S,?
Telephone. 7 d 7 'L • ' s
Address: iqs TO x,
Project Description: C
City, ST, Zip:
G,
Telephon :
State Lie. #_: ' v .% 3 City Lia #:. c ob rWj
Arch, Engr., Designer.
Address:
City., ST, Zip:
Telephone:
`!..ate.-..k.'7:'✓,G
Construction Type: , Occupancy:
State Lic. #:
Pro"ecttype circle one New Add'n Alter Repair Demo
Name of Contact Person:
Sq. Ft -
# Stories: # Units:
Telephone # of Contact Person: Estimated Value of Project: 3,/ a-6
APPLICANT: DO NOT WRITE BELOW THIS UNE
tt
Submittal
Req'd
Recd
TRACKING
PERMrr FEES
Plan Sets
Plan Check submitted.item
Amount
Structural Cales.
Reviewed, ready for corrections
Plan Check Deposit. .
Truss Cales.
Called Contact Person
Plan Check Balance
Title 24 Cake.
Plans picked up
Construction
Flood plain plan
Plans resubmitted." .
Mechanical
Grading plan
2" Review, ready for correctionsfisstre
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
SA LL
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
'^' Review; ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.LP.P.
Pub. Wks. Appr "
Date of permit Issue
School Fees
Total Permit Fees
(_ I0.. 1 S
project Address:I (--D ( b ,
Location of Sign Outdoor Signs O Indoor Signs
Phase of Sign Construction KNewSigns "'"" O Sign Alterations \
Type of Lighting Control )'{{oTQ(Gtj, ® New Lighting Controls ❑Replaced Lighting Controls O Not Installing Lighting Controls
This Certificate of Compliance includes the following components (check all that apply)
U_Mandatory Measures (Lighting Controls) 0 Maximum Allowed Lighting Power ❑Specific Lighting Sources
1. Mandatory Sign Lighting Controls
NOTES:
1. The some responsible person may install both the sign lighting power and the sign lighting controls, or o different responsible
person may install the sign lighting controls than the responsible person installing the sign lighting power.
2. The Mandatory Measures (sign lighting controls) are required for compliance with the sign lighting Standards. If the person
responsible for installing the sign'lighting power is not also responsible for the sign lighting controls, then the owner of the sign,
general contractor, or architect shall be responsible to have the sign lighting controls installed.
3. If more than one person has responsibility for compliance, each responsible person shall prepare and sign a Certificate of
Compliance and an Installation Certificate applicable to the portion of construction for which they are responsible; alternatively,
! the person with chief responsibility for construction shall prepare and sign the Certificate of Compliance Declaration Statement
for the entire construction. .
la. Statements of Responsibility: Any person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS Ol-E
shall complete Part la. Check Yes or No for all of the following statements:
1 have responsibility for installing the sign lighting controls
1
(&Yes, complete parts la and lb of this form O No, complete part la of this form
There are no existing sign lighting controls and I will be installing compliant sign lighting controls
2
Yes 0 No
There are no existing sign lighting controls and someone else will be responsible to install compliant sign lighting controls
3
Yes ❑ No
There are existing sign lighting controls that do not comply with the applicable provision of §110.9 and §130.3 and 1 will be
4
installing compliant sign lighting controls
❑ Yes tS No
There are existing sign lighting controls that do not comply with the applicable provision of §110.9 and §130.3 and someone
5
else will be responsible to install compliant sign lighting controls
O Yes No
CA Building Energy Efficiency Standards -,2013 Nonresidential Compliance June 2014
CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014
lb. Mandatory Sign Lighting Controls
If the person signing the Certificate of Compliance Declaration Statement on this NRCC-LTS-01-E is responsible for complying with
the sign lighting control requirements, that persoh'sh'all answer all of the following questions:
If there are construction documents, indicate where on the building plans the
mandatory measures (sign lighting control) note block can be located:
§1303(a)1. All indoor sign lighting is controlled with an automatic time -switch control or astronomical time-
Y❑
NN
NA
switch control.
§13O3(a)2A. All outdoor sign lighting is controlled with a photocontrol in addition to an automatic time-
Y
N
NA
switch control, or an astronomical time -switch control.
2
EXCEPTION to Section 130.3(a)2A: Outdoor signs in tunnels, and signs in large permanently covered outdoor
Y
NA
areas that are intended to be continuously lit, 24 hours per day and 365 days per year.
❑
§1303(a)28. All outdoor sign lighting that is ON both day and night is controlled with a dimmer that provides
the ability to automatically reduce sign lighting power by a minimum of 65 percent during nighttime hours.
be ON both
Y
❑
N
❑
NA
Signs that are illuminated at night and for more than 1 hour during daylight hours shall considered
3
day and night.
to Section 130.3(a)28: Outdoor signs in tunnels and large covered areas that are intended to be
Y
NA
EXCEPTION
illuminated both day and night.
❑
§1303(a)l Demand Responsive Electronic Message Center Control. An Electronic Message Center (EMC)
Y
N
N/A
having a new connected lighting power load greater than 15 kW has a control installed that is capable of
❑
❑
4
reducing the lighting power by a minimum of 30 percent when receiving a demand response signal.
EXCEPTION to Section 130.3(a)3: Lighting for EMCs that is not permitted by a health or life safety statute,
Y
NA
ordinance, or regulation to be reduced by 30 percent.
❑
Field Inspector Notes:
CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014
2 Maximum Allowed Lighting Power Method of Compliance
Certificate of Compliance and Field Inspection Energy Checklist
Complete this part if there are signs using the maximum allowed lighting power method of compliance. (Complete part 3 of
this Certificate of Compliance if there are signs using the Specific lighting sources method of compliance)
A
B
C
D E F G
H
I
J
Symbol
OPTIONAL— Energy
Complies
Filed Inspector
Description of the Sign
verified Label (see
Allotted Watts
Design Watts
YEN
Check that sign
Or Code
instructions below)
complies
a
v x
.
v1
c W
Q Z -W
_oo
Q
m
♦- 3
E
0
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
A
Symbol or code used on the plans (when plans are required) and other documents.
B
A description of the sign, or location of sign on the building; and the location of sign on construction documents.
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory -installed, ENERGY VERIFIED label, confirming that the
sign complies with the Section 140.8 of the California 2013 Title 24, Part 6 Standards, using the Maximum Allowed Lighting Power
method of compliance. The only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by
Underwriters Laboratories (UL) or other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards
C
Institute in accordance with ISO/IEC 17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection
program carried out by a Type A Inspection body in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label,
columns 'D' through'1' are not required to be filled out. Note: Using an ENERGY VERIFIED label is an optional method to validate
compliance. An ENERGY VERIFIED label is not needed for compliance.
D
The sign area in square feet.
E
List "I" if the sign is internally illuminated. List "E" if the sign is externally illuminated.
F
Allowed watts per square foot. Enter 12 if the sign is listed as "I" in column E. Enter 2.3 if sign is listed as "E" in column E.
G
Multiply the square footage in column D times the allowed Lighting Power Density (LPD = watts) In column F.
H
Show the total installed watts in the sign, as determined according to theapplicable provisions of §130(c).
1
Enter Y if the number in column H is less than or equal to the number in column G. Otherwise, the sign does not comply.
J
This page doubles as a field inspection checklist.
Field Inspector Notes:
CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014
3. Specific Liehtine Source Method of Compliance
Certificate of Compliance and. Field Inspection Energy Checklist
Complete this part if there are signs using the Specific lighting source method of compliance. (Complete part 2 of this Certificate
of Compliance if there are signs using.then-tax""m allowed lighting power method of compliance)
A
B
C
D
E
OPTIONAL
Specific light source used for
Field Inspector
Symbol
ENERGY VERIFIED
compliance
Check that Sign
or
Description
label
Shall include only lighting
Complies
Code
(see instructions
technologies listed below
below)
List all that apply
❑
o
A
Symbol or code used on the plans (when plans are required) and other documents.
B
A narrative description of the sign, or location of sign on the building; and the location of sign on construction documents
C
OPTIONAL - Check this box only if this sign has a permanent, pre-printed, factory-installed ENERGY VERIFIED label, confirming that this sign
complies with the Section 140.8 of the California 2013 Title 24, Part 6 Standards, using the Specific Lighting Source Method of Compliance. The
only labels that will be recognized for this purpose are ENERGY VERIFIED Certification Marks authorized by Underwriters Laboratories (UL) or
other Product Certification Body accredited to ISO/IEC Guide 65 by the American National Standards Institute in accordance with ISO/IEC
17011. Surveillance by the Accredited Certification Body shall be an ongoing annual inspection program carried out by a Type A Inspection body
in accordance with ISO/IEC 17020. For signs with such an ENERGY VERIFIED label, column 'D' is not required to be filled out. Note: Using an
ENERGY VERIFIED label is an optional method to validate compliance. An ENERGY VERIFIED label is not needed for compliance.
Specific Light Source Compliance Method. The sign(s) identified above use only the following lighting technologies:
List all applicable numbers (1 through 9) that apply in column D above for each row.
1
High pressure sodium lamps a
Metal halide lamps that are pulse start or ceramic served by a ballast that has a minimum efficiency of 88 percent or
2
greater. Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage
when tested according to ANSI 082.6-2005.
Metal halide lamps that are pulse start that are 320 watts or smaller, are not 250 watt or 175 watt lamps, and are served by
3
a ballast that has a minimum efficiency of 80 percent.
Ballast efficiency is the measured output wattage to the lamp divided by the measured operating input wattage when tested
according to ANSI C82.6-2005.
Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 75 percent
D
4
when the. transformer or power supply rated output current is less than 50 mA. The ratio of the output wattage to the input wattage is at
100 percent tubing load.
Neon or cold cathode lamps with transformer or power supply efficiency greater than or equal to a minimum efficiency of 68 percent
S
when the transformer or power supply rated output current is SO mA or greater. The ratio of the output wattage to the input wattage is at
100 percent tubing load.
6
Fluorescent lighting systems meeting one of the following requirements: A. Use only lamps with a minimum color rendering index (CRI) of
80; or B. Use only electronic ballasts with a fundamental output frequency not less than 20 kHz.
7
Light emitting diodes (LEDs) with a power supply having an efficiency of 80 percent or greater;
Single voltage external power supplies that are designed to convert 120 volt AC input into lower voltage DC or AC output, and have a
8
nameplate output power less than or equal to 250 watts, shall comply with the applicable requirements of the Appliance Efficiency
Regulations (Title 20).
9
Compact fluorescent lamps that do not contain a medium screw base sockets (E24/E26).
E
This page doubles as a field inspection checklist.
Field Inspector Notes:
CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance lune 2014
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. I certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
LJ.
Company: _ `
( VAI ( 12V 4'N/ YaC
Signature Date:
10
6-fL
Address: `
Qo,4-w2.pv. Su (77El.
plicae):
CEA/ HERS Certification identification (if a bl
City/State/Zip-
CA, 9zz (S
Phone:
I 0 -
7&0-71 - 2901
RESPONSIBLE PERSON'S DECLARATION STATEMENT .
RESPONSIBLE
I certify the following under penalty of perjury, under the laws of the State of California:
1. The informatidn provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design or system design
identified on this Certificate of Compliance (responsible designer).
3. The energy features and performance specifications, materials, components, and manufactured devices for the building design or system
design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
4, The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
S. I will ensure.that a completed signed copy of this Certificate of Compliance shall be made available with the building permit(s) issued for the
building, and made available to the enforcement agency for all applicable inspections. I understand that a completed signed copy of this
Certificate of Compliance is required to be included with the documentation the builder provides to the building owner at occupancy.
Responsible Designer Name:
1ZC1 C f2 OcJ GS
Responsible Designer Signature:
Company:
Date Signed:
Address:Ucense:
`il y 130s'IR1Jt .>k—t,jCSvlTEL
V-830
Chy/State/Zlp:l S O—,nFi Z (
--1li/0 — i Phone: ` , q (
V f
CA Building Energy Efficiency Standards - 2013 Nonresidential Compliance June 2014
N
October 28, 2014
Mr. Bill Sigurdsen
Sign*A*Rama
41945 Boardwalk
Palm Desert, CA 92211
SUBJECT: SIGN PERMIT APPLICATION 2014-1052
Morellia's Fruits & More
Dear Mr. Sigurdsen:
The Community Development Department has reviewed and approved the referenced application
for one permanent, illuminated building wall -mounted sign (reverse channel letters; LED
illumination). The sign is proposed on the east side elevation of the La Jolla Building in Old Town
La Quinta, to be located at 78010 Main Street, Suite 108. This approval is subject to the following
Conditions of Approval:
1. This sign permit grants the following sign:
A. One permanent, illuminated building wall -mounted sign (reverse channel letters; LED
Illumination). The total square footage for the sign will be no greater than
approximately 20.0 square feet.
2. Design and materials for the signs shall be per the approved plans (Exhibit A), as
enclosed and on file with the Community Development Department.
3. The signs shall conform to the approved sign program for Old Town La Quinta, to include
landlord approval prior to installation.
4. The applicant is required to obtain a building permit prior to the placement of this sign.
The Building Division can be reached at (760) 777-7012
Should you have any questions or need additional information, please feel free to contact me at
(760) 777-7125.
Sincerely,
Wallace Nesbit
Principal Planner
Encl.
c: Building Division
78-495 Calle Tampico I La Quinta I California 92253 1 760.777.7000 1 www.La-Quinta.ore
102" CHANNEL LETTER SECTION
Illuminated LED MLOIUUMINAMN i 3 ALUMWUMREtIgiNS
IS FACH IETiEiI FASTENED BYA
APPROWD
28" 16"MORELIA Depth: 3"
Letters - / 1 WITH 0„
P > ANCHORS
10"I FRUITS & MORE Face Color: Gold, Red, Green y WALL _ 06SALUMINUM FAC*
Return Color: Same D
Mounting: Back POWER
p LEDMDDIAB
r Standoff: 1.5° onr:Cr i
p N16TUYCARBWTE
L.E.D. Color: White, Reds 0 D• "s
WE MRS
I p• f `/,LOJII AFGEWIRE
L ~
n
12VOLT L E.D
^ [w7i.J Q i ri 7,M A4_ c y ' tERERS PEGGED OFF WAIDRIVERL
Lf
APPROVED 13Y PiLMNING DEPART WENT wml 1 -In MERs
By
RUITS DATE
•' ,"•, +., ; . EXHIBIT. - /4 ALL WALL FeIiIRRO S D sMAD WIN U L61B)=0NE 1FK
CASE N.O. /o S 2-
NEC ELECTRICAL
CODE 2010
THIS SIGN 6 INTENDED TO BE INSTALLED IN ACCORDANCE WITH REQUIREMENTS OF
ARTICLE 600 ON THE NATIONAL ELECTRIC CODE AND OR OTHER APPLICABLE LOCAL CODES
a THIS INCLUDES PROPER GROUNDING AND BONDING OF THE SIGN
RECEIVED CHANNEL LETTER CONNECTION DETAIL /7 E
__—__ TRANSFORMEN
OCT 17 2014
CITY OF LA QUINTA ow. wu oW.uMlow-wo
COMMUNITY DEVELOPMENT
JIM
U,L. LISTED AND LABELED
` f COMPLIES WITH 2013 CA ELECTRIC CODE, ARTICLE 600
Frontage: 25 Linear Feet Customer: Telephone: 760.895-8212 Jobsite: Customer Approval:
Morellia Fruits & more Fax:760-xxx-xzxx same
Address: landlord Apprava
78-010 Main Street, Suite A108
Total Signage 19.8 S.F. La Quinta, CA 92253 South ELEVATION
S1 */A * Contractors LiC # 830191 C45,C61M42 Dwg. No.: 68320 Rev.: 1 YOUR SIGNATURE ACKNOWLEDGES FULL APPROVAL OF DESIGNCONTEAIT
AND LAYOUT, RELEASING SIGArA•RAMA FROM RESPONSIBILITY IN REGARD
41-945 Boardwalk, Ste. L workers Comp. # 193sao7 Date: 10-15-14 REPRETO SENTATIVRRECT E OF ACTUAL ESIGN AND NPMS CCOLOR CALL OUTS ION. THE COL RFINAL OCOLOR WILLWN ARE LY
Palm Desert CA. 92211 Designer. JT BE MATCHED AS CLOSE AS POSSIBLE. COMMENSURATE WITH MATERIALS USED
PH 760-776-9907 a FX 760-776-9844 City LiG. #87005491 Salesperson: BS THIS DESIGN IS PROPRIETARY PRRERTYANDMAY NOT BEUSED WITHOUT
-THE EXPRESSED WRITTEN CONSENT OF SIGN A'RAMA.