The URL can be used to link to this page

PLBG (9708-085) + BLCK (04879) + SFD (04849)52660 Avenida Martinez 9708-085 04879 04849 LICENSED CONTRACTOR DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License # Lic. Class Exp. Date 473515 A .0 / ter r3JJw g`''/ , d /ate 141` ' Si nature of Contractor ' 1 , , ,,w_....r-• OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's License Law for the following reason: ( ) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business & Professionals Code). ( ) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business & Professionals Code). ( ) I am exempt under Section , B&P.C. for this reason Date Signature of Owner WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: ( ) I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. ( ) I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permitr is issued. My workers' compensation insurance carrier & policy no. are: Carrier S F1 A 9 Policy No. 9 1 6 ,> ' !S .II r 4 5J 411141 196 rTA`ld l' f i^dw9l1. (This section need not be completed if the permit valuation is for $100.00 or less). ( ) I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with thosetprovisiorisy'c'' Date: ' • % Applicant % .. , 1, . w Warning: Failure to secure Workers' Compensation coverage is unlawful and shall subject an employer to crminal penalties and civil fines up to $100,000, in addition to the cost of compensation, damages as provided for in Section 3706 of the Labor Code, interest and attorney's fees. IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on his application. 1. Each person upon whose behalf this application is made & each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this applicaton agrees to, & shall, indemnify. & hold harmless the City of La Quinta, its officers, agents and employees. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all City, and State laws relating to the building construction, and. hereby authorize representatives of this City to enter upon eabove-mentioned property for inspection.purposes. Signature low 'Date /✓ 4//fP y BUILDING PERMIT PERM'S70X-ow; CONTROL# DATE W1419-7 VALUATION "4",'+!D•91#4 LOT TRACT' 5758 JOB SITE :10L,A)U111,XVWN11A.11AldAP(l.lN1114 IAPN ADDRESS VER CONTRACTOR/DESIGNER/ENGINEER MMAIM 7 { i az: "'ti'.5T f;; 5 tuu.a'1 LiV iiclM,i iia"D1C;Z ►i 130 CANLAU t.,Ax2t31N't'E1 i,:A 42 C.A CATHEDRAL CRY CA 07.7.44 USE OF PERMIT PLUNIA i',FtL: 1' 1 .'I ICS ave r'l_° / LOW -10 LS : S I d aid i a ve w e s e rv► .rc a r>s 1'r—r4nwl `` g*,, .nnA ,ay a, f( C[ 1c AApp p 7y1i t .lP}. ¢rA d:ai.GJ 4..►A.LNt♦ . k TI.T1Yl Y.: . 9 y.VIL h7LJl`Fl!-11Iti C r frLUN1 111I'N'tJ R-1- w wSN..Vrf R 101. -000.419 -WO $34'00 DATE `1'OTAt.Af1+aRtNIJI' Via' MS' 01110, NOW BY - I DATE FINALED INSPECTOR d lst a laaa .a,aw al.krEr i;V 00 $0,00 SAM)() INSPECTION RECORD 01, OPERATION DATE INSPECTOR OPERATION DATE INSPECTOR BUILDING APPROVALS MECHANICAL APPROVALS Set Backs Underground Ducts Forms & Footings Ducts Slab Grade Return Air Steel Combustion Air Roof Deck Exhaust Fans O.K. to Wrap F.A.U. Framing Compressor Insulation Vents Fireplace P.L. Grills Fireplace T.O. Fans & Controls Party Wall Insulation Condensate Lines Party Wall Firewall Exterior Lath Drywall - Int. Lath Final Final BLOCKWALL APPROVALS POOLS - SPAS steel:, Set Backs Electric Bond Footings Main Drain Bond Beam Approval to Cover Equipment Location Underground Electric Underground Plbg. Test Final Gas Piping PLUMBING APPROVALS Gas Test Electric Final Waste Lines Heater Final Water Piping Plumbing Final Plumbing Top Out Equipment Enclosure Shower Pans O.K for Finish Plaster Sewer Lateral Pool Cover Sewer Connection Encapsulation Gas Piping 111-4 Gas Test Appliances Final Final Utility Notice (Gas) ELECTRICAL APPROVALS Temp. Power Pole Underground Conduit Rough Wiring Low Voltage Wiring Fixtures Main Service Sub Panels Exterior Receptacles %F.I. Smoke Detectors Temp. Use of Power Final Utility Notice (Perm) COMMENTS: P.O. BOX 1504 Building$ „ i& 78-105CALLEESTADO Aririrpcc LA QUINTA, CALIFORNIA 92253 Owner I Martin J. Raimare mailing Address y . 77--840 Michittan 00-7 City Zip Tel. FeaIr'. Aes:>r> ere 92260 360-2101 Contractor O&aav JAuildar Address City jZip State Lic. I City & Classif. Lic. # Arch., Engr., Designer Address Tel. CityI Zip I State Lic. # LICENSED CONTRACTOR'S DECLARATION I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my license is in full force and effect. SIGNATURE DATE OWNER -BUILDER DECLARATION I hereby affirm that I am exempt from the Contractor's License Law for the following reason: (Sec. 7031.5,Business and Professions Code: Any city or county which requires a permit to construct, after, Improve, demolish, or repair any structure, prior to its issuance also requires the applicant for such permit to file a signed statement that he Is licensed pursuant to the provisions of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of Division 3,of the Business and Professions Code, or thathe is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than rive hundred dollars ($500). ❑ I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and Professions- Code: The Contractor's License Law does not apply to an owner or property who builds or improves thereon and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he did not build or improve for the purpose of sale.) ❑ I, as owner of the property, am exclusively contracting with licensed contractors to con- struct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractor(s) licensed pursuant to the Contractor's License Law.) ❑ 1 am exempt under Sec. B. & P.C. for this reason Date t- rhe Owner ""f'r•. i' WORKERS' COMPENSATION DECLARATION I hereby affirm that I have a certificate of consent to self -insure, or a certificate of Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.) Policy No. Company O Copy is filed with the city. O Certified copy is hereby furnished. CERTIFICATE OF EXEMPTION FROM WORKERS' COMPENSATION INSURANCE (This section need not be completed if the permit is for one hundred dollars ($100) valuation or less.) I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Workers' Compensation Laws of California. -'r ll1 Date Owner •/ /ti'•/ NOTICE TO APPLICANT: If, after making this Certificate of Exemption you should become subject to the Workers' Compensation provisions or the Labor Code, you must forthwith comply with such provisions or this permit shall be deemed revoked. CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued. (Sec. 3097, Civil Code.) Lender's Name Lender's Address This is a building permit when properly filled out, signed and validated, and is subject to expiration if work thereunder is suspended for 180 days. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives -of this city to enter the above- mentioned property for inspection purposes. Signature of applicant Date Mailing Address City, State, Zip BUILDING: TYPE CONST. OCC. GRP. A.P. Number 773-302-007 04879 Legal Description Project Description Retaining wall 65' X 2' Ar,074fp,t'6041 ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATE INSPECTOR 12/2t}}86 Issued by- Date Permit Validated by: Validation: 1 WHITE - FINANCE, PINK - APPLICANT, GREEN - BUILDING, GOLDENROD - ASSESSOR'S OFFICE, HARD COPY - FILE Sq. Ft. No. Size Stories No. Dw. Units New ❑ Add ❑ Alter ❑ Repair ❑ Demolition ❑ Estimated Valuation PERMIT AMOUNT Plan Chk. Dep. Plan Chk. Bal. Const. $20,00 Mech. Electrical Plumbing # S.M.I. ` Grading Driveway Enc. Infrastructure TOTAL REMARKS Ar,074fp,t'6041 ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATE INSPECTOR 12/2t}}86 Issued by- Date Permit Validated by: Validation: 1 WHITE - FINANCE, PINK - APPLICANT, GREEN - BUILDING, GOLDENROD - ASSESSOR'S OFFICE, HARD COPY - FILE CONSTRUCTION ESTIMATL NO. ELECTRICAL FEES NO. PLUMBING FEES IST FL SO FT ip $ UNITS SLAB GRADE ROUGH PLUMB BONDING YARD SPKLR SYSTEM 2ND FL SO FT. a FORMS SEWER OR SEPTIC TANK ROUGH WIRING MOBILEHOME SVC. BAR SINK POR SO FTa GAS (ROUGH) METER LOOP HEATING (FINAL) POWER OUTLET ROOF DRAINS GAR SO. FT. 0 TEMP. POLE GROUT DRAINAGE PIPING CAR P. SO FT. ef FINAL INSP. WALL SO. FT. a WATER SYSTEM DRINKING FOUNTAIN GRADING CU. yd. $ plus xi =$ URINAL SO. FT. (it FINAL INSP. FRAMING ESTIMATED CONSTRUCTION VALUATION S WATER PIPING NOTE: Not to be used as property tax valuation FLOOR DRAIN MECHANICAL FEES WATER SOFTENER VENT SYSTEM FAN EVAP.COOL HOOD SIGN WASH ER(AUTOYDISH) APPLIANCE DRYER FIRE ZONE ROOFING GARBAGE DISPOSAL FURNACE UNIT WALL FLOOR SUSPENDED FIREPLACE LAUNDRYTRAY AIR HANDLING UNIT CFM KITCHEN SINK ABSORPTION SYSTEM B.T.U. TEMP USE PERMIT SVC WATER CLOSET COMPRESSOR HP POLE, TEMIPERM LAVATORY HEATING SYSTEM FORCED GRAVITY AMPERES SERV ENT SHOWER BOILER B.T.U. SO. FT. ® c BATH TUB SO. FT. g c WATER HEATER MAX. HEATER OUTPUT. B.T.U. SO. FT. RESID I4: c SEWAGE DISPOSAL SO.FT.GAR (g 3/4c HOUSE SEWER FINAL INSPECTION GAS PIPING PERMIT FEE PERMIT FEE PERMIT FEE DBL TOTAL FEES MICRO FEE MECH.FEE L.CK.FEE CONST. FEE ELECT. FEE SMI FEE PLUMB FEE STRUCTURE PLUMBING ELECTRICAL HEATING 8 AIR COND. SOLAR SETBACK GROUND PLUMBING UNDERGROUND - A.C. UNIT COLL. AREA SLAB GRADE ROUGH PLUMB BONDING HEATING (ROUGH) STORAGE TANK FORMS SEWER OR SEPTIC TANK ROUGH WIRING DUCT WORK ROCK STORAGE FOUND. REINF. GAS (ROUGH) METER LOOP HEATING (FINAL) OTHER APP.IEOUIP. REINF. STEEL GAS (FINAL) TEMP. POLE GROUT WATER HEATER SERVICE FINAL INSP. BOND BEAM WATER SYSTEM GRADING CU. yd. $ plus xi =$ LUMBER GR. FINAL INSP. FRAMING FINAL INSP. ROOFING REMARKS: VENTILATION FIRE ZONE ROOFING FIREPLACE SPARK ARRESTOR GAR. FIREWALL LATHING MESH INSULATIONISOUND FINISH GRADING FINAL INSPECTION CERT. OCC. FENCE FINAL INSPECTOR'S SIGNATURESIRIITIALi , GARDEN WALL FINAL Building Address Owner Mailing Address City P.O. BOX 1504 "AN ADEQUATELY SIZED DEBRIS CQNPAINER 78-105 CALLE ESTADO IS REQUIRED ON THE JOU-SITE DURING 52-660 martino "LA QUINTA, CALIFORNIA 92253 t C 11 • • - . - - ALL PHASES OF CONSTRUCTION 77-840 Palm Demaxt Contractor Michigan 00--7 Zip Tel. 92?60 Alder Zip Tel. .r. BUILDING :' TYPE CONST. OCC. GRP. 4 - - A.P. Number - 773-302"007 360-2701 01 Legal Description Project Description ' " "D" State Lic.I City & Classif. Lic. # Arcn., tngr., Designer Address Tel. CityI Zip I State I Lic. # LICENSEDCONTRACTOR'S DECLARATION I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section lot of Division 3 of the Business and Professions Code, and my license is in full force and effec _SIGNATURE DATE OWNER -BUILDER DECLARATION I .hereby affirm that I am exempt from the Contractor's License Law for the following reason:, (Sec. 7031.5,Business and Professions Code: Any city or county which requires a permit- to construct, alter, improve, demolish, or repair any structure, prior to its issuance also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the provisions of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, or that. he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500). O I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building orimprovement is sold within one year of completion, the owner -builder will have the burden of proving that he did not build or improve for the purpose of sale.) ❑ I, as owner of the property, am exclusively contracting with licensed contractors to con- struct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractors) licensed pursuant to the Contractor's License Law.) ❑ 1 am exempt under Sec. B. & P.C. for this reason Date t' I u r Owner WORKERS' COMPENSATION DECLARATION I hereby affirm that I have a certificate of consent to self -insure, or a certificate of Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.) Policy No. Company O Copy is filed with the city. ❑ Certified copy is hereby furnished. CERTIFICATE OF EXEMPTION FROM WORKERS'COMPENSATIONINSURANCE (This section need not be completed if the permit is for one hundred dollars ($100) valuation or less.) I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Workers' Compensation Laws of California. Date Owner NOTICE TO APPLICANT., If, after making this Certificate of Exemption you should become subject to the Workers' 'Compensation provisions of the Labor Code, you must forthwith comply with such provisions or this permit shall be deemed revoked. CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued. (Sec. 3097, Civil Code.) Lender's Name Lender's Address This is a building permit when properly filled out, signed and validated, and is subject to expiration it work thereunder is suspended for 180 days. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives -of this city to enter the above- mentioned property for inspection purposes. Signature of applicant Date Mailing Address City, State, Zip l WHITE - FINANCE, PINK - APPLICANT, GREEN - BUILDING, GOLDENROD --ASSESSOR'S OFFICE, HARD COPY - FILE , — ... .:', d:-•_ •x. ..r -. , .. _ -. 5 . :. ..k.wYl 3.-._... w ._ .... .. .Ji..r'+s'._. .. _ _. : d.. '. v.,i...-. ..2 _'t•_. C, f a Sq. Ft. Size 1430 No. No. Dw. Stories Units New ❑ Add ❑ Alter ❑ Repair ❑ Demolition ❑ Estimated Valuationr% s PERMIT AMOUNT Plan Chk. Dep. $50.00 Plan Chk. Bal. $ 66.191 Const. 367.00 Mech. 36.00 Electrical 75 . 45 Plumbing 105.00 S.M.I. 5.43 Grading 20.00 Driveway Enc. 20.00 Infrastructure l r 721.56 TOTAL REMARKS 1i'i4' d (4ry Ate ,cRynyr t ( . , y ' rFl. 1•i .' I .f # i' 4k ,.vr v14.. G A F a ai 17 ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATEI S CCTOT,, ii Permit Issued by: —Date—Permit Validated by: Validation: l WHITE - FINANCE, PINK - APPLICANT, GREEN - BUILDING, GOLDENROD --ASSESSOR'S OFFICE, HARD COPY - FILE , — ... .:', d:-•_ •x. ..r -. , .. _ -. 5 . :. ..k.wYl 3.-._... w ._ .... .. .Ji..r'+s'._. .. _ _. : d.. '. v.,i...-. ..2 _'t•_. C, f a CONSTRUCTION ESTIMATE NO. ELECTRICAL FEES NO. PLUMBING FEES IST FL SO F1 (p $ UNITS • SLAB GRADE .. ROUGH PLUMB YARD SPKLR SYSTEM 2ND FL SO FT. a HEATING (ROUGH) STORAGE TANK FORMS MOBILEHOME SVC. BAR SINK POR SO FT. a DUCT WORK ROCK STORAGE ej CFOUND. REINF. s y POWER OUTLET ROOF DRAINS GAR SO. FT. or HEATING (FINAL) OTHER APPJEOUIP. REINF. STEEL GAS (FINAL) DRAINAGE PIPING CAR P. SO FT. (U GROUT WATER HEATER DRINKING FOUNTAIN WALL SO. FT. @ FINAL INSP. BOND BEAM WATER SYSTEM URINAL SO. FT. GRADING cu. yd. plus x$ =$ ESTIMATED CONSTRUCTION VALUATION $ WATER PIPING NOTE: Not to be used as property tax valuation FINAL INSP. FLOOR DRAIN MECHANICAL FEES t ( (- d l I olz WATER SOFTENER VENT SYSTEM FAN EVAP.COOL HOOD SIGN WASH ER(AUTO)(DISH) APPLIANCE DRYER GARBAGE DISPOSAL FURNACE UNIT WALL FLOOR SUSPENDED LAUNDRYTRAY AIR HANDLING UNIT CFM KITCHEN SINK ABSORPTION SYSTEM B.T.U. TEMP USE PERMIT SVC WATER CLOSET COMPRESSOR HP POLE, TEMIPERM LAVATORY HEATING SYSTEM FORCED GRAVITY AMPERES SERV ENT SHOWER BOILER B.T.U. SO. FT. ® c BATH TUB SO. FT. @ c WATER HEATER MAX. HEATER OUTPUT, B.T.U. SO. FT. RESID Q 1 w c SEWAGE DISPOSAL INSULATIONISOUND - SO.FT.GAR @ Ji c HOUSE SEWER • GAS PIPING PERMIT FEE PERMIT FEE PERMIT FEE DBL TOTAL FEES MICRO FEE MECH.FEE 1PL.CK.FEE CONST. FEE ELECT. FEE SMI FEE PLUMB FEE STRUCTURE PLUMBING ELECTRICAL HEATING 8 AIR COND. SOLAR, SETBACK 5 .oe ROUND PLUMBING UNDERGROUND A.C. UNIT COLL. AREA SLAB GRADE .. ROUGH PLUMB BONDING HEATING (ROUGH) STORAGE TANK FORMS SEWER OR SEPTIC TANK ROUGH WIRING DUCT WORK ROCK STORAGE ej CFOUND. REINF. s y AS (ROUGH)(—/ !/ METER LOOP HEATING (FINAL) OTHER APPJEOUIP. REINF. STEEL GAS (FINAL) TEMP. POLE GROUT WATER HEATER SERVICE FINAL INSP. BOND BEAM WATER SYSTEM $ GRADING cu. yd. plus x$ =$ LUMBER GR. FINAL INSP. FRAMING -" FINAL INSP. GROOFING _ / _ t ( (- d l I olz / 2- REMARKS: VENTILATION FIRE ZONE ROOFING FIREPLACE SPARK ARRESTOR GR. FIREWALL VO Q 1 ? MESH INSULATIONISOUND - FINISH GRADING FINAL INSPECTIONS -,)- CERT. OCC. FENCE FINAL INSPECTOR'S SIGNATURES/INITIALS GARDEN WALL FINAL Desert Sands Unified School District CERT-IFICATIO-N OF PAYMENT OF 0 y [DU C u SCHOOL FACILITY FEES K✓- TO: City of La Quinta DATE: Z/ro Department of Community Development 0161 78-105 Calle Estado La Quinta, CA 92253 This is t certi y t t / ' , developer of which is located at — within this District, has paid school faci y fees imposed pursivanC to the authority generat d by vernment Code Sectiolt 53080 in thamount f s lC '3;o/ e2—+- cBring a total of are feet of ) r iden atial or ( ) industrial/comm rcial development and that buil ing permits for this footage in this development may w be issued by your jurisdiction. O DESERT SANDS U IFIED SCHOOL DISTRICT White - Build* g Department • Yellow - Facilities Planning • Pi k - Accounting • Gold - eveloper 4 /,, x — / J / (10)-37 Is. '.179$n4 T.O. 88-07499-21 1 T1l • Q . *TE L. . SPACE ABOVE THIS UNE FOR RECORDER'S USE GRANT DEED (Individual) THIS UNDERSIGNED GRANTOR(s) DECLARE(s) TRANSFER4,4?f is 7.70 [ computed on full value of property conveyed, Or p wmputed on full value less value of liens or encumbrances remaining at time of sale. and FOR VALUE RECEIVED JAl-ILV A. HASLETT; a single man ±r X7'3. h'• i ,GRANT(S) to MARTIN J. REIMERS, an unmarried man the below described real property in the state of California. county of Riverside ,city of unincorporated area t Lot 17, Block 143, of Santa Carmelita of Vale La p ).. Quinta as shown on ma filed in Book 18, Page 92 of of Maps, in the Office of the County Recorder of said County. 1 Tag Parcel No. 773-302-007 STATE OF CALIFORNIA COUNTYOF Riverside ss On April 20, 1988 before me, .the undersigned, a Notary Public in and for said State, personally appeared JOHN A. ASLEW--- i • i ' 1 i personally known to me (or proved to me on the basis of satisfactory evidence) to be the person(s) whose name(s) is/ SIMSubscribed to the within instrument and acknowledged to me that he/hex_ ' ecuted the same. OFFICIAL SEAL, MARILYN JEAN TUVELL WITNESS my hand and official seal. NOTARY PUBLIC - CALIFORNIA RIVERSIDE COUNTY My Comm Expires Dec 9 1988 - Signature (This 1 area for official notarial seal) M1AIL•TAX STATEMIENTS TO ABOVE ADDRESS. C-285M1186CP88707 RECORDING REQUESTED BY CHICAGO TITLE COMPANY C E AND WHEN RECORDED MAIL TO 411 T`! ME Martin J. Reimers E -G P.O. BOX 21141 W o rREET " a RP"11116 Reno, NEV 89515 1 T1l • Q . *TE L. . SPACE ABOVE THIS UNE FOR RECORDER'S USE GRANT DEED (Individual) THIS UNDERSIGNED GRANTOR(s) DECLARE(s) TRANSFER4,4?f is 7.70 [ computed on full value of property conveyed, Or p wmputed on full value less value of liens or encumbrances remaining at time of sale. and FOR VALUE RECEIVED JAl-ILV A. HASLETT; a single man ±r X7'3. h'• i ,GRANT(S) to MARTIN J. REIMERS, an unmarried man the below described real property in the state of California. county of Riverside ,city of unincorporated area t Lot 17, Block 143, of Santa Carmelita of Vale La p ).. Quinta as shown on ma filed in Book 18, Page 92 of of Maps, in the Office of the County Recorder of said County. 1 Tag Parcel No. 773-302-007 STATE OF CALIFORNIA COUNTYOF Riverside ss On April 20, 1988 before me, .the undersigned, a Notary Public in and for said State, personally appeared JOHN A. ASLEW--- i • i ' 1 i personally known to me (or proved to me on the basis of satisfactory evidence) to be the person(s) whose name(s) is/ SIMSubscribed to the within instrument and acknowledged to me that he/hex_ ' ecuted the same. OFFICIAL SEAL, MARILYN JEAN TUVELL WITNESS my hand and official seal. NOTARY PUBLIC - CALIFORNIA RIVERSIDE COUNTY My Comm Expires Dec 9 1988 - Signature (This 1 area for official notarial seal) M1AIL•TAX STATEMIENTS TO ABOVE ADDRESS. C-285M1186CP88707 E W th O F' E -G li: W o " a to W 1 T1l • Q . *TE L. . SPACE ABOVE THIS UNE FOR RECORDER'S USE GRANT DEED (Individual) THIS UNDERSIGNED GRANTOR(s) DECLARE(s) TRANSFER4,4?f is 7.70 [ computed on full value of property conveyed, Or p wmputed on full value less value of liens or encumbrances remaining at time of sale. and FOR VALUE RECEIVED JAl-ILV A. HASLETT; a single man ±r X7'3. h'• i ,GRANT(S) to MARTIN J. REIMERS, an unmarried man the below described real property in the state of California. county of Riverside ,city of unincorporated area t Lot 17, Block 143, of Santa Carmelita of Vale La p ).. Quinta as shown on ma filed in Book 18, Page 92 of of Maps, in the Office of the County Recorder of said County. 1 Tag Parcel No. 773-302-007 STATE OF CALIFORNIA COUNTYOF Riverside ss On April 20, 1988 before me, .the undersigned, a Notary Public in and for said State, personally appeared JOHN A. ASLEW--- i • i ' 1 i personally known to me (or proved to me on the basis of satisfactory evidence) to be the person(s) whose name(s) is/ SIMSubscribed to the within instrument and acknowledged to me that he/hex_ ' ecuted the same. OFFICIAL SEAL, MARILYN JEAN TUVELL WITNESS my hand and official seal. NOTARY PUBLIC - CALIFORNIA RIVERSIDE COUNTY My Comm Expires Dec 9 1988 - Signature (This 1 area for official notarial seal) M1AIL•TAX STATEMIENTS TO ABOVE ADDRESS. C-285M1186CP88707 I I COUNTY OF RIVERSIDE DEPARTMENT OF HEALTH Assessors Parcel No. Q Z O U w co ENVIRONMENTAL HEALTH SERVICES . [!ZY — Z — ad -7 PERMIT APPLICATION FOR A SUBSURFACE SEWAGE DISPOSAL SYSTEM Applicant: 'Submit this form with four copies of a scaled plot plan (1-20 scale) drawn to County speculations as indicated on the attached check list A non-refundable filing fee (see below) is required when the application is submitted. Check must be made payable to the County of Riverside. Approval of this application shall remain valid for a period not to exceed one year from date of approval. VERIFY ITEMS IN SECTION A FROM BUILDING & SAFETY APPLICATION BUILDING DEPARTMENT APPLICATION LOG' # AWrector, tact Pe n Phone Address & P one iLT I S a 17& 77 7 MW4 ( 14 *0 7 Par. Phone M lin Address 12t l 6a,C City State Zip JPpet yd Legal Description Prop. (PM, Tract, Lot , iN, T 7 . 4 •C LobGe s n f O r a r A nc Use of Permit P/P, CU, etc. Other //vvv F Dwelling, MH Site Prep, etc. moi] 2 U w Holding Tank Agreements Completed Certification of Existing S.D. System Required WQCB Clearance required. (Attach Form DOH SAN 007, Santa Ana Region Only) Solis Percolation Report Required. Special Feasibility Boring Report Required. Detailed Contour Plot Plans Required (1 to 5 ft interval) Staff Specialist.Lot Inspection Required ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes (TIAL No s N < NC3' C No < Noo Lot Inspection bffie . Soils boring report by' Project # 88 / ( 1 Solis Map Page r Q Soil Type Signature of Applicant Date O Y No. of Systems CATEGORY: REV CODEE No. Dwelfng Units (/ Bedrooms, FbitlTmwUift CATEGORY: REV CODE FEE Grease/Sand Intcp m SUBSURFACE DISPOSAL 1238 c — ❑ SITE EVALUATION UPON REQUEST 7349 $42.00 ds ❑ MULTIPLE PARCELS WITHIN SAME (NO PLOT PLAN) CD Z LAND DIVISION Gal ( Leach Line Sq. Ft ❑ SEWER/SEPTIC VERIFICATION 7348 $11.00 Q a. 1 at 4 Parcels (Each) 1238 $45.00 R rook/ per running tt. (Less than 1 year) min. i drainlines or U. b. Each Parcel after 4 7344 $16.00 ❑ PRELIMINARY ELECTIVE 7352 $45.00 W ❑ Rereview (2nd review same parcel) 7344 $16.00 EVALUATION (Attach DOH SAN 53) ]' N ❑ Site Evaluation in Conjunction with } ❑ HOLDING TANK 7351 $45.00 Critical Area 7346 $86.00 ❑ ALTERNATIVE/EXPERIMENTAL 7345 $13200 ❑ Site Evaluation Lot Less than SYSTEM 10,000 Sq. Ft. 7347 $86.00 moi] 2 U w Holding Tank Agreements Completed Certification of Existing S.D. System Required WQCB Clearance required. (Attach Form DOH SAN 007, Santa Ana Region Only) Solis Percolation Report Required. Special Feasibility Boring Report Required. Detailed Contour Plot Plans Required (1 to 5 ft interval) Staff Specialist.Lot Inspection Required ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes ❑ Yes (TIAL No s N < NC3' C No < Noo Lot Inspection bffie . Soils boring report by' Project # Date / ( 1 Solis Map Page r Q Soil Type Approved by Date O Y No. of Systems T of System(s) HokfIng Tank 'J 'Now ❑ Existing No. Dwelfng Units (/ Bedrooms, FbitlTmwUift (1) Septic Tank Soil Rate Grease/Sand Intcp ❑ Replacement (tr its • 44y fInstallll /"q DQ Gal ds / Gal ( Leach Line Sq. Ft Sidewall allowance IJne(s) R long wide with Leach Bed sq. ft' trench area R rook/ per running tt. sq. R min. i drainlines or Of area Leachlines/bed special design for slope: (3) Pit Diameter No. Pits Pit Below Seepage Pit Total pth -401 Applicable sofOverburden factor N/A ❑ 6 r ]' Inlet (BI) / / 1 J a Max. Allow O Depth 66 I No. 2 System/t//,4 I --REMARKS: ' - This application is APEOVEo/ uIE = f6r the category checked in SECTION B above, regarding the design of a subsurface disposal system as indicated on the accompanied plot plan, using the requirements set forth in SECTION C above. A building permit is necessary for the installation of the 0 above -designed system. No construction is permitted in the required reserved 100% expansion area. ?' °i 1( 1 Septic tank and sewer lines must be 50' minimum from any wet s /0 _ ` T Leach lines must be 100' minimum from any wells, including expansio arUJI r S&page pits must be 1.50' minimum from anywells, including ex. 61on a I ria Siclnature clLafth Official"" ".0 GGt a'[.c+ , / 3 O r, ,e J • . RECEIPT NO. Y DISTRICT: j DOH SAN 1221 Riverside, ❑ fndio {/88) DISTRIBUTION:. r Issued ByDate ❑ Hemet ❑ Perris ❑ Rancho Calif. ❑ Blythe WHITE - Office file YELLOW - Applicant PINK - Bldg. Dept GOLDENROD - Plans/Records 1)111(,[ of AGRICUL I URAL COMMISSIONOt AND LVI:IGI115 b. 1ALASUIIES 69-613 Ilwy 06, Sulte I1-12 Cnuchelll►, CA 92236 619-34Z-0291 E. LEON SPAUGY CO'•1 1 i i10'.E JAMES U V,ALLAt:F A`SIS1a-,1 f97-1--uSSIUM.P CLENIENI aE`vEN151E SLAM MEE UENEWPER' S IWW-1 + 4L O ADDRESS 1 % % $ - -; tQ — v 0 0,G.4 Z 6 a IYELUN1ONE1 (4 LtL 3 6a - Z 70 War uevelopert After reviewing your landscaili.nq illal►s, all illan.t w3terial listedIs 10tu .11 violation of yuara!lltine 164S c uveminy the Coacilelia Valley. olis do occur anti they diEEer [run plant material listed, tills oEElce must lie notiEied itnllediately. . Ifli ik you Lor protectilly alld pLeservilly 411-t— qural CalElEissiol s UL E ice cci Indio quid Riverside ()[[ice the Coachella Valley's [west -Free enviroldllent. uuena 79-811 Country Club Drive, Suite 4 Berm uda Dunes, CA 92201 - (619) 345-1588 / 328-9131 Client Name Client Client Phone - 161 - /o 9-& 4b7 PROJECT S — (a (p C) ELEVATION LOCATION & REFERENCE CURVE CONTRACYOR OWNER WEATHER TEMP. 0 at AM 0 at PM PRESENT AT SITE A(IA a5r,' S 7 9 NO TEST NUMBER TEST LOCATION LOT No. ELEVATION FIELD TESTING REFERENCE CURVE MOISTURE CONTENT % DRY DENSITY IbsiCu. ft. MAXIMUM DRY DENSITY % MAXIMUM DRY DENSITY Ibs./cu. ft. OPTIMUM MOISTURE CONTENT % A(IA a5r,' S 7 9 NO O L , r-9 6, A e"3 03. REMARKS: Zw PL&D Ing,' gkwv kosao ci V VW 4 10-7A 3917 CLIENT REPRESENTATIVE SIGNATURE d W) f V TECHNICIANS SIGNATURE TITLE 24 REPORT FOR: RESIDENCE FOR MARTIN REIMERS MARTINEZ STREET LA QUINTA, CA. PROJECT DESIGNER: MARTIN REIMERS 77-840 MICHIGAN #0-7 PALM DESERT, CA. .92260 (619) 360-2701 OWNER: MARTIN REIMERS AND 77-840 MICHIGAN PALM DESERT, CA. 92260 KATHY ROSS REPORT PREPARED BY: THOMPSON SERVICES (R.E. THOMPSON) 9255 FORTUNA AVENUE YUCCA VALLEY, CA. 92284 (619) 365-1520 Job Number: RES1101E Date: 2/16/1989 The COMPLY 24 computer program has been used to perform the calculations summarized in this compliance report. This program has interim approval and is authorized by the California Energy Commission for use with the Second Generation Nonresidential Building Energy Efficiency Standards for Nonresidential Occupancies. Second Generation Residential Occupancies shown to comply with this program conform to the results produced by the Public Domain Point System, developed by the California Energy Commission. This program developed by Michael Gabel Associates (415) 428-0803. 1 Table Of Contents for Title 24 Report ------------------------------------- CoverPage.......................................................... 1 Tableof Contents ................................................... 2 Form CF -1R Certificate of Compliance: Residential ................... 3 Form MF -1R Mandatory Measures Checklist: Residential G Form P-2R.Points System Summary ..................................... 8 Form WS -1R Points Thermal Mass Worksheet ............................ 9 Form WS -2R Interpolation Worksheet .................................. 10 Form S Shading Coefficient (SC) Worksheet ........................... 11 Domestic Hot Water Worksheet ........................................ 12 HVAC Zone & Space Loads Summary ..................................... 13 Form CF -3 Construction Assemblies ................................... 15 CERTIFICATE OF COMPLIANCE: Residential (part 1 of 3) CF -1R page 3 of 20 T- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ' Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS Building Permit No Location: Palm Desert Date: 2/16/1989 Checked By Documentation: --------------------------------------------------------------------------- THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) PROJECT ADDRESS MARTINEZ STREET LA QUINTA, CA. GENERAL INFORMATION Compliance Method: Climate Zone: Total Conditioned Floor Area: Building Occupancy: Front Entry Orientation: Floor Construction Type: Infiltration Control: BUILDING SHELL INSULATION Component Area R-13 Frame Wall 1108 RESIDENCE TO GARAGE 212 R-30 Roof/Gyp Ceiling 1430 Carpeted Slab 1208 Exposed Slab 159 Point System 15 1430 sqft Single Fam Det Nort as South/West Slab Standard (circle one) U -Value Location/Comments ------- ------------------------------------ 0.0885 1ST FLOOR 0.0942 1ST FLOOR 0.0355 1ST FLOOR 0.7200 1ST FLOOR/Slab F2 Val 0.9000 1ST FLOOR/Slab F2 Val THERMAL MASS Thick Mass Material Area (in) Type Location/Description --------------------- ---- ----- ------ ------------------------------ Concrete, Heavyweight 159 3.500 Exposed 1ST FLOOR/Int Mass Concrete, Heavyweight 1271 3.500 Covered 1ST FLOOR/Int Mass I CERTIFICATE OF COMPLIANCE: Residential (part 2 of 3) CF -1R page 4 of 20 - -r-----------------------------------------.------------------------------ Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Documentation: THOMPSON SERVICES (R.E. THOMPSON) ------------------------------------------------------- SHADING COEFF GLAZING Glass Glass Glass w/Int Orientation ----------- Area ------ Type U -Val Only Shade East 13.0 ------ Double ----- 0.65 ----- 0.88 ----- 0.75 West 68.8 Double 0.65 0.88 0.75 South 40.8 Double 0.65 0.88 0.75 North 54.0 Double 0.65 0.88 0.75 SHADING (for Glazing above) Over Orientation ----------- Exterior Device SC hang East ------------------------ None ---- 1.00 ---- 0.0 West None 1.00 0.0 South None 1.00 0.0 North None 1.00 0.0 Building Permit No Checked By Date (User # 1615) ------------------- Description Double/Nonwhite Double/Nonwhite Drapes Double/Nonwhite Drapes Double/Nonwhite Drapes Double/Nonwhite Drapes Framing Type Metal w/o Mullions Metal w/o Mullions Metal w/o Mullions Metal w/o Mullions 0 CERTIFICATE OF COMPLIANCE: Residential (part 3 of 3) CF -1R page 5 of 20 ------------------------------------------------------ ---------------------- I Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) -----------------------------------------------------------------7--------- HVAC SYSTEMS Min Output Duct Duct Manufacturer/Model No. System Type --------------- Eff ----- (Btuh) ------ Location RVal (or approved equal) ----------------- ---- ----------------------- Gas Fired. 0.720 64300 Vent. Attic Space 5.7 G12Q34X80HS16-461V UPFL Air Conditioner 9.600 42000 Max. Furnace Output: 45000 Btuh + [(72% - 71%) x 7000] = 52000 Btuh Cooling Exception: CFM Cooling (see Load Calcs) requires Btuh HOT WATER SYSTEMS Tank Manufacturer/Model No. # of Energy # of System Type Volume (or approved equal) Units Credits Pumps ------------------- ----------------------------- ------------ ----- Gas Fired 50.0 Std Gas 50 gal or less 1 0 0 SPECIAL FEATURES/REMARKS (Add extra sheets if necessary) COMPLIANCE STATEMENT This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Chapter 2-53 and Title 20, Chapter 2, Subchapter 4, Article 1 of the California Administrative Code. This certificate has been signed by the individual with overall design responsibility and the building owner, who shall retain a copy of it and transmit the certificate to any subsequent purchaser of the building. When this Certificate of Compliance is submitted for a single building plan to be built in multiple orientations, all building conservation features which vary are indicated in the Special Features/Remarks section. DESIGNER MARTIN REIMERS 77-840 MICHIGAN #0-7 PALM DESERT, CA. 92260 (619) 360-2701 License No: Signed: A j &D DOCUMENTATION AUTHOR THOMPSON SERVICES (R.E. THOMPSON) 9255 FORTUNA AVENUE YUCCA VALLEY, CA. 92284 (619) 365-1520 Signed: BUILDING OWNER MARTIN REIMERS AND KATHY ROSS 77-840 MICHIGAN PALM DESERT, CA. 92260 Signed: ENFORCEMENT AGENCY Name: Agency: Telephone: Signed: MANDATORY MEASURES CHECKLIST (part 1 of 2) MF -1R page 6 of 20 -7 ------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance ..pproach used. Items marked with an asterisk (*) may be superseded by more stringent compliance requirements listed on the Certificate of Compliance. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as binding minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. BUILDING ENVELOPE MEASURES Enforcement o Sec. 2-5352(a): Minimum ceiling insulation R-19 weighted average. * o Sec. 2-5352(b): Loose fill insulation manufacturers labeled R -Value. o Sec. 2-5352(c): Minimum wall insulation in framed walls R-11 weighted average (does not apply to exterior mass walls). * o Sec. 2-5352(k): Slab edge insulation - water absorption rate no greater than 0.3%, water vapor transmission rate no greater than 2.0 perm/inch. o Sec. 2-5311: Insulation specified or installed meets California Energy Commission (CEC) quality standards. Indicate type and form. o Sec. 2-5352(f): Vapor barriers mandatory in Climate Zones 14 and 16 only. o Sec. 2-5317: Infiltration/Exfiltration Controls a. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. b. Doors and windows certified. c. Doors and windows weatherstripped; all joints and penetrations caulked and sealed. o Sec. 2-5352(e): Special infiltration barrier installed to comply with Sec. 2-5351 meets CEC quality standards. o Sec. 2-5352(d): Installation of Fireplaces 1. Masonry and factory -built fireplaces have: a. Tight fitting, closeable metal or glass door b. Outside air intake with damper and control c. Flue damper and control 2. No continuous burning gas pilots allowed. MANDATORY MEASURES CHECKLIST (part 2 of 2) MF -1R page 7 of 20 --i ------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 I Designer: MARTIN REIMERS I Building Permit No I Location: Palm Desert Date: 2/16/1989 I Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- HVAC AND PLUMBING SYSTEM MEASURES Enforcement o Sec. 2-5352(g) and 2-5303: Space conditioning equipment sizing: attach calculations. o Sec. 2-5352(h) and 2-5315: Setback thermostat on all applicable heating systems. o Sec. 2-5316(a): Ducts constructed, installed and insulated per Chapter 10, 1976 UMC. * o Sec. 2-5316(b): Exhaust systems have damper controls. o Sec. 2-5314(c): Gas-fired space heating equipment has intermittent ignition devices. o Sec. 2-5314: HVAC equipment, water heaters, showerheads and faucets certified by the CEC. o Sec. 2-5352(i): Water heater insulation blanket (R-12 or greater) or combined interior/exterior insulation (R-16 or greater); first 5 feet of pipes closest to tank insulated (R-3 or greater). o Sec. 2-5312(Exception I): Pipe insulation on steam and steam condensate return & recirculating piping. o Sec. 2-5318(d): Swimming Pool Heating 1. System has: a. On/off switch on heater. b. Weatherproof instruction plate on heater. c. Plumbed to allow for solar. 2. 75 percent thermal efficiency. 3. Pool cover. 4. Time clock. 5. Directional water inlet. LIGHTING AND APPLIANCE MEASURES o Sec. 2-5352(j): Lighting - 25 lumens/watt or greater for general lighting in kitchens and bathrooms. o Sec. 2-5314(c): Gas fired appliances equipped with intermittent ignition devices. o Sec. 2-5314(a): Refrigerators, refrigerator -freezers, freezers and fluorescent lamp ballasts certified by the CEC. Indicate make and model number. POINTS SYSTEM SUMMARY: CLIMATE ZONE 15 P -2R page'8 of 20 ----------------------------------------- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS I Building Permit No I Location: Palm Desert Date: 2/16/1989 I Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User 1615) --------------------------------------------------------------------------- BUILDING DATA Conditioned Floor Area 1430 sqft Number of Stories 1 Occupancy Type Single Fam Det SCORE CARD ------------------------- Measure Points 1. Roof Insulation ------- 0.0355 (U -Value) ------ -2 2. Wall Insulation 0.0894 (U -Value) -5 3. Raised Floor Insulation 0.0000 (U -Value) 3a. Controlled Vent Crawlspace 0.0 (R -Value) I 0 4. Slab Edge Insulation 0.7518 (f2 factor) I 5. Infiltration Standard 0 6. Glass Heat Loss 0.65 12.3% 4 Sum 1-6 -3 7. Shade Open Area % Glass ------------ SC OH Eff % a. North 54.0 3.8 ---- x 0.77 ---- ----- = 2.9 -1 b. East 13.0 0.9 x 0.77 x 1.00 = 0.7 0 c. South 40.8 2.9 x 0.77 x 1.00 = 2.2 0 d. West 68.8 4.8 x 0.77 x 1.00 = 3.7 1 e. Skylight 0.0 0.0 x 0.00 = 0.0 0 8. Shade Closed Area % Glass ----- SC OH Eff % a. ------- North 54.0 3.8 -------- x 0.66 ----- = 2.5 0 b. East 13.0 0.9 x 0.66 x 1.00 = 0.6 2 c. South 40.8 2.9 x 0.66 x 1.00 = 1.9 -2 d. West 68.8 4.8 x 0.66 x 1.00 = 3.2 -8 e. Skylight 0.0 0.0 x 0.00 = 0.0 0 9. Interior Thermal Mass 2.11 -1 10. Exterior Wall Mass 0.00 0 Sum 7-10 -9 11. Heating System 0.720 SE x 0.83 Duct Eff = 0.60 Eff SE 1 Zonal Control: No 12. Cooling System 9.600 SEER x 0.82 Duct Eff = 7.91 Eff SEER 11 13. Water Heating (see DHW Worksheet) = 0 Point Total: 0 THERMAL MASS WORKSHEET WS -1R' page 9 of 20 -n ------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS I Building Permit No Location: Palm Desert Date: 2/16/1989 I Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------=------------ INTERIOR THERMAL MASS Interior Interior Sides Wall Mass Mass Mass Mass Material Thick Exposed U -Value Area Factor Capacity ---------------------- ------------------- ------ -------- -------- Concrete, Heavyweight 3.50 1 159.3 x 4.6 = 732.8 Concrete, Heavyweight 3.50 0 1270.7 x 1.8 = 2287.3 TOTAL 3020.0 INTERIOR MASS FACTOR 3020.0 IMC / 1430 sqft = 2.11 * Mass listed above with a Wall U -Value denotes the Interior Mass credit for Exterior Mass Walls, and are repeated below for Exterior Mass credit. 0 Sides Exposed indicates mass covered with surface material >= R-2. EXTERIOR MASS WALLS Exterior Exterior Sides Wall Mass Mass Mass Mass Material Thick Exposed U -Value Area Factor Capacity ---------------------- ----------------=--- ------ -------- -------- NONE INTERPOLATION, WEIGHTED AVERAGE & ADDITION WORKSHEET WS -2R page 10 of 20 --•------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Building Permit No Date: 2/16/1989 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) j Date (User # 1615) --------------------------------------------------------------------------- INTERPOLATION Point Point Point Score Actual Value Score Score Value Value Point Item ------- 1 ----- Value ------ 1 ----- 2 1 2 1 Score Roof 4 +( 0.0355 - 0.02) x ----- ( -4 - ----- 4) /( ----- 0.04 ----- - 0.02) ----- _ -2 Wall -3 +( 0.0894 - 0.08) x ( -8 - -3) /( 0.10 - 0.08) _ -5 Slab Edge 2 +( 0.7518 - 0.70) x ( -1 - 2) /( 0.80 - 0.70) = 0 Glass Type 2 5 +(12.3497 -12.00) x ( 3 - 5) /(13.00 -12.00) = 4 N Shade Open 0 +( 2.9243 - 2.00) x ( -1 - 0) /( 3.00 - 2.00) _ -1 E Shade Open 0 +( 0.7040 - 0.00) x ( 0 - 0) /( 1.00 - 0.00) _ 0 S Shade Open 0 +( 2.2095 - 2.00) x ( 0 - 0) /( 3.00 - 2.00) = 0 W Shade Open 1 +( 3.7258 - 3.00) x ( 1 - 1) /( 4.00 - 3.00) = 1 N Shade Clsd 0 +( 2.4923 - 2.00) x ( -1 - 0) /( 3.00 - 2.00)'= -0 E Shade Clsd 4 +( 0.6000 - 0.00) x ( 1 - 4) /( 1.00 - 0.00) = 2 S Shade Clsd 2 +( 1.8831 - 1.00) x ( -2 - 2) /( 2.00 - 1.00) _ -2 W Shade Clsd -7 +( 3.1754 - 3.00) x ( -12 - -7) /( 4.00 - 3.00) _ -8 Int Mass -1 +( 2.1119 - 2.00) x ( 0 - -1) /( 2.50 - 2.00) _ -1 Heating 1 +( 0.6007 - 0.60) x ( 2 - 1) /( 0.70 - 0.60) = 1 Cooling 0 +( 7.9131 - 7.00) x ( 12 - 0) /( 8.00 - 7.00) = 11 WEIGHTED AVERAGE POINTS Type 1 Type 2 Type 3 Total Average Item --------- Points Area ------ ---- Points. ------ Area_ ---- Points ------ Area ---- Area ----- Points ------- SHADING COEFFICIENT (SC) WORKSHEET FORM S page 11 of 20 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -------- Project: ------Project: RESIDENCE FOR MARTIN.REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- GENERAL INFORMATION 1. Glazing Type: Double 3. Framing Type: Metal w/o Mullions 5. Framing/Mullion Factor: 0.88 (from Table G-10) 6. Interior Shade Type: Double/Nonwhite Drapes 7. SC Shade Open: 0.88 (from Table G-9 or show calculation) 8. SC Shade Closed: 0.75 (from Table G-9 or show calculation) GLAZING, INTERIOR SHADE & FRAMING 9a. 0.88 (SC #7) x 0.88 (FMF #5) = 0.77 SC Shade Open 10a.0.75 (SC #8) x 0.88 (FMF #5) = 0.66 SC Shade Closed EXTERIOR SHADE Exterior Shade Type: NO EXTERIOR SHADE OVERHANG FACTOR Glass Ovrhng Dist Glass Proj OH Factor OH Factor Orientation Area Depth Above Height Ratio Shade Open Shade Clsd ----------- ----- ------ ----- ------ ----- ---------- ---------- NO OVERHANGS DHW WORKSHEET ONE: STORAGE TYPE GAS OR ELECTRIC page 12 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 - Designer: MARTIN REIMERS Location: Palm Desert Building Permit Noy Date: 2/16/1989 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- A EQUIPMENT DATA 1 Water heater type SG Enter SG or SE F, fixed input 2 Manufacturer & Water main temp. 70.0 F, see Table 1 3 Model number Daily hot water load Std Gas 50 gal or less 4 Ignition device GP GP, gas pilot or IID, int. ignition device 5 Tank volume 50.0 Total gallons, from CEC Appliance Directory 6 Recovery efficiency 76.0 Percent from CEC Appliance Directory 7 Standby loss 3.1 Percent/hour, from CEC Appliance Directory 8 Rated input 55000 Btu/hr, from CEC Appliance Directory C WATER HEATING ENERGY (1 kWh = 3413 Btu) 9 Number of Heaters 1 From building plans (total) B OPERATING DATA 1 Climate Zone 15 See Appendix D 2 Water heating budget 18700 KBtu/yr/unit, see Table 1, 3 Tank set temp. 140 F, fixed input 4 Water main temp. 70.0 F, see Table 1 5 Daily hot water load 50 50 or 35 gallons/unit, see Table 1 6 Ambient air temp. 72.6 F, see Table 1 7 Adj Standby Losses 0.0205 See Table 2 or Appendix B 8 No. dwelling units 1 From building plans (total) 9 Number of pumps 0 From building plans 10 Pumping energy 0.0 Watt-hr/yr per Pump, see Table 3 C WATER HEATING ENERGY CREDITS --------------------------------------------------------------------------- 1 Credit name See Table 5 2 Annual savings 0.0 KBtu/yr/dwelling unit, see Table 5 D CALCULATE ANNUAL WATER HEATING ENERGY (KBtu/yr) --------------------------------------------------------------------------- 1 Recovery load 10539.4 ([B5 x 8.25 x(140-B4)x 365 x 0.001]-C2)x B8 2 Recovery energy 13867.6 D1 / A6 3 Standby loss energy 4839.6 (24 - [(D2 x 1000)/(A8 x A9 x 365)]) x 8.25 x A5 x B7 x 365 x (140-B6) x 0.001 x A9 4 Pumping energy 0.0 B9 x B10 x 3.413 x 3 x 0.001 5 Total energy 18707.2 GAS SYSTEMS: (D2 + D3 + D4) / B8 6 Water heating budget ELECTRIC: ([(D2 + D3) x 3] + D4) / B8 comparison -7.2 KBtu/yr/unit B2 - D5 7 Water heating budget -0.0 Points (D6 / Floor Area) x 2 x B8 HVAC ZONE HEATING & COOLING LOAD SUMMARY page 13 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS I Building Permit No I Location: Palm Desert Date: 2/16/1989 I Checked By Documentation:,THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- HVAC ZONE DESCRIPTION HVAC Zone Name: WHOLE HOUSE HVAC System Name: G12Q34X80HS16-461V UPFL System Multiplier: 1 Heating Schedule: Residential Heating Cooling Schedule: Residential Cooling Fan Schedule: Residential HVAC & Fans Sizing Method: COINCIDENT Relative Humidity: 50 % COOLING SPACES IN THIS ZONE ----------------------- PEAK ---- HEATING ------- PEAK SENSIBLE LATENT 1ST FLOOR (Jan 12am) 24512 ------- ------------ (Aug 2pm) 23922 ------ 1072 TOTAL SPACE LOAD 24512 -------- 23922 ------ 1072 Bypass Ventilation Air ( 0 cfm) 0 ( 0 cfm) 0 -0 Supply Duct Conduction 490 478 Supply Duct Leakage 245 239 11 Supply Fan Heat Gain -1697 1697 EFFECTIVE SPACE LOAD 23550 26337 1083 Ventilation ( 0 cfm) 0. ( 0 cfm) 0 -0 Return Air Lighting Gain 0 Return Duct Conduction 471 527 Return Duct Leakage 235 263 11 Return Fan Heat Gain -0 ------- 0 TOTAL SYSTEM LOAD 24256 -------- 27127 ------ 1094 2.3 tons 0.1 tons SYSTEM PERFORMANCE 64300 34501 3327 AT DESIGN CONDITIONS 2.9 tons 0.3 tons SPACE HEATING & COOLING LOAD SUMMARY page 14 of 20 ------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Building Permit No Date: 2/16/1989 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) j Date (User # 1615) --------------------------------------------------------------------------- SUMMARY OF PEAK HOUR LOADS FOR SPACE Space Name: DESIGN CONDITIONS -------------------- Peak Hour: Indoor Conditions: Outdoor Conditions: LOAD COMPONENT Wall Conduction Window Conduction Door Conduction Roof Conduction Skylight Conduction Floor Conduction Slab Conduction Interior Conduction Infiltration Solar Gain Lighting Equipment Occupants SPACE LOADS HEATING Jan 12am 70 F DB 32 F DB Btu/hr 4486 4362 0 1931 0 0 7864 0 5869 24512 Btu/hr 1ST FLOOR COOLING SENSIBLE LATENT Aug 2pm 78 F DB 50 % RH 112 F DB 73 F WB Btu/hr 3229 3710 0 2380 0 0 0 5251 6327 976 976 1073 23922 Btu/hr 2.0 tons Btu/hr 0 1073 1072 Btu/hr 0.1 tons SUPPLY AIR QUANTITIES --------------------- Heating: 24512 Btu/hr / [1.10 * (105 F Supply - 65 F TStat)] = 557 cfm Cooling: 23922 Btu/hr / [1.08 * ( 78 F TStat - 55 F Supply)] = 963 cfm CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 15 of 20 -------------------- ----------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: R-13 Frame Wall Assembly Type: Wall Assembly,Tilt: 90 deg (Vertical) Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0684 x 0.85 + 0.1969 x 0.15 = 0.0877 Winter U -Value 0.0688 x 0.85 +.0.2000 x 0.15 = 0.0885 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch-of Construction Assembly Absorptivity: 0.70 Roughness: Stucco, Wood Shingles Weight: 12.3 lb/sqft Heat Capacity: 2.88 R -Value 11.40 11.30 U -Value 0.0877 0.0885 Th R -Value Construction Components -------------------------------------------- Fr (in) Summer Winter Outside Air Film ------------------------------ 0.25 0.17 1. Stucco. 0.875 0.17 0.17 2. Membrane, Vapor -Permeable Felt 0.010 0.06 0.06 3. Insulation, Mineral Wool, R-13 * 3.500 13.00 13.00 4. Gypsum or Plaster Board 0.500 0.45 0.45 5. 6. 7. 8. 9.. Inside Air Film --------------------------------------------------------------------------- 0.68 0.68 Total 14.61 14.53 Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0684 x 0.85 + 0.1969 x 0.15 = 0.0877 Winter U -Value 0.0688 x 0.85 +.0.2000 x 0.15 = 0.0885 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch-of Construction Assembly Absorptivity: 0.70 Roughness: Stucco, Wood Shingles Weight: 12.3 lb/sqft Heat Capacity: 2.88 R -Value 11.40 11.30 U -Value 0.0877 0.0885 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 16 of 20 -------------------------------------------------------------- m RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Building Permit No Location: Palm Desert Date: 2/16/1989 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: RESIDENCE TO GARAGE Assembly Type: Wall Assembly Tilt: 90 deg (Vertical) Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0773 x 0.85 + 0.1849 x 0.15 = 0.0934 Winter U -Value 0.0777 x 0.85 + 0.1877 x 0.15 = 0.0942 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Smooth Plaster, Metal Weight: 6.4 lb/sqft Heat Capacity: 1.84 R -Value 10.70 10.61 U -Value 0.0934 .0.0942 Th R -Value Construction Components --------------------------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Gypsum or Plaster Board 0.625 0.56 0.56 2. Insulation, Mineral Wool, R-11 * 3.500 11.00 11.00 3. Gypsum or Plaster Board 0.500 0.45 0.45 4. 5. 6. 7. 8. 9. Inside Air Film --------------------------------------------------------------------------- 0.68 0.68 Total 12.94 12.86 Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0773 x 0.85 + 0.1849 x 0.15 = 0.0934 Winter U -Value 0.0777 x 0.85 + 0.1877 x 0.15 = 0.0942 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Smooth Plaster, Metal Weight: 6.4 lb/sqft Heat Capacity: 1.84 R -Value 10.70 10.61 U -Value 0.0934 .0.0942 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 17 of 20 Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Building Permit No Date: 2/16/1989 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: R-30 Roof/Gyp Ceiling Assembly Type: Roof Assembly Tilt: 0 deg (Horizontal Roof) Framing Percentage: 10.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0299 x 0.90 + 0:0778 x 0.10 = 0.0347 Winter U -Value 0.0304 x 0.90 + 0.0815 x 0.10 = 0.0355 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 9.2 lb/sqft Heat Capacity: 2.71 R -Value 28.84 28.14 U -Value 0.0347 0.0355 Th R -Value Construction Components --------------------------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Roofing, Asbestos -Cement Shingles 0.250 0.21 0.21 2. Plywood 0.500 0.63 0.63 3. Air Space 12.000 1.00 0.80 4. Insulation, Mineral Wool, R-30 * 9.500 30.00 30.00 5. Gypsum or Plaster Board 0.500 0.45 0.45 6. 7. 8. 9. Inside Air Film ---------------------------------------------------------------------------- 0.92 0.61 Total 33.46' 32.87 Framing Percentage: 10.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0299 x 0.90 + 0:0778 x 0.10 = 0.0347 Winter U -Value 0.0304 x 0.90 + 0.0815 x 0.10 = 0.0355 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 9.2 lb/sqft Heat Capacity: 2.71 R -Value 28.84 28.14 U -Value 0.0347 0.0355 v CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 18 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: Carpeted Slab Assembly Type: Floor Assembly Tilt: 180 deg (Horizontal Floor) Framing Percentage: 0.0 Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.01 R -Value U -Value 3.22 3.45 0.3106 0.2899 Th R -Value Construction Components --------------------------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Concrete, 140 lb, Not Dried 3.500 0.28 0.28 2. Flooring, Carpet and Fibrous Pad 0.250 2.08 2.08 3. 4. 5.' 6. 7. 8. 9. Inside Air Film --------------------------------------------------------------------------- 0.61 0.92 Total 3.22 3.45 Framing Percentage: 0.0 Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.01 R -Value U -Value 3.22 3.45 0.3106 0.2899 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 19 of 20 I.-J------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS 1 -COMPLY 24 v 2.20 Designer: MARTIN REIMERS Location: Palm Desert Date: 2/16/1989 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: Exposed Slab Assembly Type: Floor Assembly Tilt: 180 deg (Horizontal Floor) Framing Percentage: 0.0 % Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.00 R -Value 1.19 1.42 U -Value 0.8403 0.7042 Th R -Value Construction Components --------------------------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Concrete, 140 lb, Not Dried 3.500 0.28 0.28 2. Flooring, Asphalt, Lino, Vinyl or Rubber 0.010 0.05 0.05 3. 4. 5. 6. 7. 8. 9. Inside Air Film --------------------------------------------------------------------------- 0.61 0.92 Total 1.19 1.42. Framing Percentage: 0.0 % Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.00 R -Value 1.19 1.42 U -Value 0.8403 0.7042 CONSTRUCTION ASSEMBLY COMPLIANCE FORM I CF -3 page 20 of 20 „- ------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.2'0 Designer: MARTIN REIMERS Building Permit No Location: Palm Desert Date: 2/16/1989 Checked By Documentation:,THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: Double/Nonwhite Drapes Assembly Type: Glazing Th R -Value Construction Components Fr (in) Summer Winter ---------------------------------- ---------------------------------------- Outside Air Film 0.25 0.17 1. CEC Double Glazing 0.500 0.69 0.69 2. 3. 4. 5. 6. 7. 8. 9. Inside Air Film 0.68 0.68 --------------------------------------------------------------------------- Framing Percentage: 0.0 % Framing Material: NONE ------------------------------- Sketch of Construction Assembly Visible Transmittance: 0.85 Winter Shading Coefficient: 0.88 Summer Shading Coefficient: 0.75' Total 1.62 1.54 OVERALL VALUES ADJUSTED FOR FRAMING R -Value 1.62 1.54 U -Value 0.6179 0.6500 'Zi N TITLE 24 REPORT FOR: RESIDENCE FOR MARTIN REIMERS MARTINEZ STREET LA QUINTA, CA. PROJECT DESIGNER: MARTIN REIMERS 77-840 MICHIGAN #0-7_ PALM DESERT, CA. 92260 (619) 360-2701 OWNER: MARTIN REIMERS AND KATHY ROSS 77-840 MICHIGAN PALM DESERT, CA. 92260 REPORT PREPARED BY: THOMPSON SERVICES (R.E. THOMPSON) 9255 FORTUNA AVENUE YUCCA VALLEY, CA: 92284 (619) 365-1520 Job Number: RES1101E Date: 11/1/1988 The COMPLY 24 computer program has been used to perform the calculations summarized.in this compliance report. This program has interim approval and is authorized by the California -Energy Commission for use with the Second Generation Nonresidential Building Energy Efficiency Standards for.Nonresidential Occupancies. Second Generation Residential Occupancies shown to comply with this program conform to the results produced by the Public Domain Point System, developed by the California Energy Commission. This program developed by Michael Gabel Associates (415) 428-0803. Table Of Contents for Title 24 Report CoverPage ................ ....... ......... .... .... ... 1 Tableof Contents ................................. .................. 2 Form CF -1R Certificate of Compliance: Residential 3 Form MF -1R Mandatory Measures Checklist: Residential 6 Form P -2R Points System Summary... .......................... ......... 8 Form WS -1R Points Thermal Mass Worksheet 9 Form WS -2R Interpolation Worksheet .............................. .. 10 Form S Shading Coefficient (SC) Worksheet ........................... 11 DomesticHot Water Worksheet .................. o ..................... 12 HVACZone & Space Loads Summary ..................................... 13 Form CF -3 Construction Assemblies ................................... 15 CERTIFICATE OF COMPLIANCE: Residential (part 1 of 3) CF -1R page 3 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- PROJECT ADDRESS MARTINEZ STREET LA QUINTA, CA. GENERAL INFORMATION Compliance Method: Climate Zone: Total Conditioned Floor Area: Building Occupancy: Front Entry Orientation: Floor Construction Type: Infiltration Control: BUILDING SHELL INSULATION Component Area 2X4 R-19 WALL 1108 RESIDENCE TO GARAGE 212 R-30 Roof/Gyp Ceiling 1430 Carpeted Slab 1208 Exposed Slab 159 Point System 15 1430 sqft Single Fam Det North/East/Sout West (circle one) Slab Standard U -Value Location/Comments ------- ----------- ------------------------ 0.0581 1ST FLOOR 0.0942 1ST FLOOR 0.0355 1ST FLOOR 0.7200 1ST FLOOR/Slab F2 Val 0.9000 1ST FLOOR/Slab F2 Val THERMAL MASS Thick Mass Material Area (in) Type Location/Description --------------------- ---- ------------ ------------------------------ Concrete, Heavyweight 159 3.500 Exposed 1ST FLOOR/Int Mass Concrete, Heavyweight 1271 3.500 Covered 1ST FLOOR/Int Mass CERTIFICATE OF COMPLIANCE: Residential (part 2 -of 3) CF -1R page 4 of 20 -----.---------------------------------------------------------------------- 'Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Documentation: THOMPSON SERVICES (R.E. THOMPSON) -------------------------------------------------------- SHADING COEFF GLAZING Glass Glass Glass w/Int Orientation ----------- Area ------ Type ------ U -Val Only Shade East 13.0 Double ----- 0.65 ----- 0.88 ----- 0.75 West 68.8 Double 0.65 0.88 0.75 South 40.8 Double 0.65 0.88 0.75 North 54.0 Double 0.65 0.88 0.75 SHADING (for Glazing above) Over Orientation ----------- Exterior Device ------------------------ SC hang East None ---- 1.00 ---- 0.0 West None 1.00 0.0 South None 1.00 0.0 North None 1.00 0.0 Building Permit No I Checked By Date (User # 1615) -------------------- Description Double/Nonwhite Drapes Double/Nonwhite.Drapes Double/Nonwhite Drapes Double/Nonwhite Drapes Framing Type Metal w/o Mullions Metal w/o Mullions Metal w/o Mullions Metal w/o Mullions CERTIFICATE OF COMPLIANCE: Residential (part 3 of 3) CF -1R page 5 of 20 -----.---------------------------------------------------------------------- `Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN.REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) --------------------------------------------------------------------------- HVAC SYSTEMS R -Val Manufacturer/Model No. System Type Eff Output Duct Location Duct (or approved equal) --------------- ----- ----------------------- ---- ----------------------- Heat Pump 7.000 36000 Vent. Attic Space 2.1 LENNOX CHP15-411-3P Heat Pump 10.300 35200 Max. Furnace Output: 45000 Btuh + [(76% - 71%) x 7000] = 82351 Btuh Cooling Exception: CFM Cooling (see Load Calcs) requires Btuh HOT WATER SYSTEMS Manufacturer/Model No. # of Energy # of System Type Volume (or approved equal) Units Credits Pumps ------------------- ----------------------------- ---- ------ ----- Gas Fired 50.0 Std Gas 50 gal or less 1 0 0 SPECIAL FEATURES/REMARKS (Add extra sheets if necessary) COMPLIANCE STATEMENT This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Chapter 2-53 and Title 20, Chapter 2, Subchapter 4, Article 1 of the California Administrative Code. This certificate has been signed by the individual with overall design responsibility and the building owner, who shall retain a copy of it and transmit the certificate to any subsequent purchaser of the building. When this Certificate of Compliance is submitted for a single building plan to be built in multiple orientations, all building conservation features which vary are indicated in the Special Features/Remarks section. DESIGNER MARTIN REIMERS 77-840 MICHIGAN PALM DESERT, CA. (619) 360-2701 O-7 92260 License No: Signed: DOCUMENTATION AUTHOR THOMPSON SERVICES (R.E. THOMPSON) 9255 FORTUNA AVENUE YUCCA VALLEY, CA. 92284 (619) 365-1520 Signed: BUILDING OWNER MARTIN REIMERS AND KATHY ROSS 77-840 MICHIGAN PALM DESERT, CA. 92260 Signed• ENFORCEMENT AGENCY Name: Agency: Telephone: Signed: MANDATORY MEASURES CHECKLIST (part 1 of 2) MF -1R page 6 of.20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used.. Items marked with an asterisk (*) may be superseded by more stringent compliance requirements listed on the Certificate of Compliance. When this checklist is incorporated into.the permit documents, the features noted shall be considered by all parties as binding minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. BUILDING ENVELOPE MEASURES Enforcement o Sec. 2-5352(a): Minimum ceiling insulation R-19 weighted average. o Sec. 2-5352(b): Loose fill insulation manufacturers labeled R -Value. o Sec. 2-5352(c): Minimum wall insulation in framed walls R-11 weighted average (does not apply to exterior mass walls). o Sec. 2-5352(k): Slab edge insulation - water absorption rate no greater than 0.3%, water vapor transmission rate no greater than 2.0 perm/inch. o Sec. 2-5311: Insulation specified or installed meets California Energy Commission (CEC) quality standards. Indicate type and form. o Sec. 2-5352(f): Vapor barriers mandatory in Climate Zones 14 . and 16 only. o Sec. 2-5317: Infiltration/Exfiltration Controls a. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. b. Doors and windows certified. c. Doors and windows weatherstripped; all joints and penetrations caulked and sealed. o Sec. 2-5352(e): Special infiltration barrier installed to comply with Sec. 2-5351 meets CEC quality standards. o Sec. 2-5352(d): Installation of Fireplaces 1. Masonry and factory -built fireplaces have: a. Tight fitting, closeable metal or glass door b. Outside air intake with damper and control c. Flue damper and control 2. No continuous burning gas pilots allowed. MANDATORY MEASURES CHECKLIST (part 2 of 2) MF -1R - page 7 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- HVAC AND PLUMBING SYSTEM MEASURES Enforcement o Sec. 2-5352(g) and 2-5303: Space conditioning equipment sizing: attach calculations. o Sec. 2-5352(h) and 2-5315: Setback thermostat on all applicable heating systems. o Sec. 2-5316(a): Ducts constructed, installed and insulated per Chapter 10,'1976 UMC. o Sec. 2-5316(b): Exhaust systems have damper controls. o Sec. 2-5314(c): Gas-fired space heating equipment has intermittent ignition devices. o Sec. 2-5314: HVAC equipment, water heaters, showerheads and faucets certified by the CEC. o Sec. 2-5352(i): Water heater insulation blanket (R-12 or greater) or combined interior/exterior insulation (R-16 or greater); first 5 feet of pipes closest to tank insulated (R-3 or greater). o Sec. 2-5312(Exception I): Pipe insulation on steam and steam condensate return & recirculating piping. o Sec. 2-5318(d): Swimming Pool Heating 1. System has: a. On/off switch on heater. b. Weatherproof instruction plate on heater. c. Plumbed to allow for solar. 2. 75 percent thermal efficiency. 3. Pool cover. 4. Time clock. 5. Directional water inlet. LIGHTING AND APPLIANCE MEASURES o Sec. 2-5352(j): Lighting - 25 lumens/watt or greater for general lighting in kitchens and bathrooms. o Sec. 2-5314(c): Gas fired appliances equipped with intermittent ignition devices. o Sec. 2-5314(a): Refrigerators, refrigerator -freezers, freezers and fluorescent lamp ballasts certified by the CEC. Indicate make and model number. POINTS SYSTEM SUMMARY: CLIMATE ZONE 15 P -2R page 8 of 20 -----------------------------'---------------------------------------------- 'Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS I Building Permit No I Location: Palm Desert Date: 11/1/1988 I Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- BUILDING DATA Conditioned Floor Area 1430 sqft Number of Stories 1 Occupancy Type Single Fam Det SCORE CARD Measure Points ------------------------- 1. Roof Insulation ------- 0.0355 (U -Value) ------ -2 2. Wall Insulation 0.0639 (U -Value) 0 3. Raised Floor Insulation 0.0000 (U -Value) 3a. Controlled Vent Crawlspace 0.0 (R -Value) I 0 4. Slab Edge Insulation 0.7518 (f2 factor) I 5. Infiltration Standard 0 6. Glass Heat Loss 0.65 12.3% 4 Sum 1-6 2 7. Shade Open Area % Glass SC OH Eff % a. North 54.0 3.8 x 0.77 = 2.9 -1 b. East 13.0 0.9 x 0.77 x 1.00 = 0.7 0 c. South 40.8 2.9 x 0.77 x 1.00 = 2.2 0 d. West 68.8 4.8 x 0.77 x 1.00 = 3.7 1 e. Skylight 0.0 0.0 x 0.00 = 0.0 0 8. Shade Closed Area % Glass SC OH Eff % a. ------------ North 54.0 3.8 x -------- 0.66 ----- = 2.5 0 b. East 13.0 0.9 x 0.66 x 1.00 = 0.6 2 c. South 40.8 2.9 x 0.66 x 1'.00 = 1.9 -2 d. West 68.8 4.8 x 0.66 x 1.00 = 3.2 -8 e. Skylight 0.0 0.0 x 0.00 = 0.0 0 9. Interior Thermal Mass 2.11 -1 10. Exterior Wall Mass 0.00 0 Sum 7-10 -9 11. Heating System 7.000 HSPF x 0.78 Duct Eff = 5.46 Eff HSPF 1 Zonal Control: No 12. Cooling System 10.300 SEER x 0.74 Duct Eff = 7.62 Eff SEER 7 13. Water Heating -7 KBtu/yr / 1430 sqft x 2 points/KBtu = 0 Point Total: 1 THERMAL 14ASS WORKSHEET WS -1R page 9 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24. v 2.10 Designer: MARTIN REIMERS I Building Permit No Location: Palm Desert Date: 11/1/1988 I Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- INTERIOR THERMAL MASS Mass Material Thick ---------------------- ----- Concrete, Heavyweight 3.50 Concrete, Heavyweight 3.50 Sides Wall Exposed U -Value ------- ------- 1 0 Interior Interior Mass Mass Mass Area Factor Capacity ------ 159.3 -------- x 4.6 = -------- 732.8 1270.7 x 1.8 = 2287.3 TOTAL 3020.0 INTERIOR MASS FACTOR 3020.0 IMC / 1430 sqft = 2.11 * Mass listed above with a Wall U -Value denotes the Interior Mass credit for Exterior Mass Walls, and are repeated below for Exterior Mass credit. 0 Sides Exposed indicates mass covered with surface material >= R-2. EXTERIOR MASS WALLS Exterior Exterior Sides Wall Mass Mass Mass Mass Material Thick Exposed U -Value Area Factor'. Capacity ---------------------- ------------------- ------ -------- -------- NONE INTERPOLATION, WEIGHTED AVERAGE & ADDITION WORKSHEET WS -2R page 10 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) ( Date (User # 1615) --------------------------------------------------------------------------- INTERPOLATION Point Point Point Score Actual Value Score Score Value Value Point Item ------- 1 ----- Value ------ 1 2 1 2 1 Score Roof 4 +( 0.0355 ----- - 0.02) x ----- ( -4 - ----- 4) /( ----- 0.04 ----- - 0.02) ----- _ -2.2 Wall 1 +( 0.0639 - 0.06) x ( -3 - 1) /( 0.08 - 0.06) = 0.2 Slab Edge 2 +( 0.7518 - 0.70) x ( -1 - 2) /( 0.80 - 0.70) = 0.4 Glass Type 2 5 +(12.3497 -12.00) x ( 3 - 5) /(13.00 -12.00) = 4.3 N Shade Open 0.+( 2.9243 - 2.00) x ( -1 - 0) /( 3.00 - 2.00) _ -0.9 E Shade Open 0 +( 0.7040 - 0.00) x ( 0 - 0) /( 1.00 - 0.00) = 0.0 S Shade Open 0 +( 2.2095 - 2.00) x ( 0 - 0) /( 3.00 - 2.00) = 0.0 W Shade Open 1 +( 3.7258 - 3.00) x ( 1 - 1) /( 4.00 - 3.00) = 1.0 N Shade Clsd 0 +( 2.4923 - 2.00) x ( -1 - 0) /( 3.00 - 2.00) _ -0.5 E Shade Clsd 4 +( 0.6000 - 0.00) x ( 1 - 4) /( 1.00 - 0.00) = 2.2 S Shade Clsd 2 +( 1.8831 - 1.00) x ( -2 - 2) /( 2.00 - 1.00) _ -1.5 W Shade Clsd -7 +( 3.1754 - 3.00) x ( -12 - -7) /( 4.00 - 3.00) _ -7.9 Int Mass -1 +( 2.1119 - 2.00) x ( 0 - -1) /( 2.50 - 2.00) _ -0.8 Heating 0 +( 5.4600 - 5.14) x ( 1 - 0) /( 5.50 - 5.14) = 0.9 Cooling 0 +( 7.6220 - 7.00) x ( 12 - 0) /( 8.00 - 7.00) = 7.5 WEIGHTED AVERAGE POINTS Type 1 Type 2 Type 3 Total Average Item --------- Points Area ------ ---- Points ------ Area ---- Points ------ Area ---- Area ----- Points ------- SHADING --------------------------------------------------------------------------- COEFFICIENT (SC) WORKSHEET FORM S page 11 of 20 Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) --------------------------------------------------------------------------- GENERAL INFORMATION 1. Glazing Type: Double 3. Framing Type: Metal w/o Mullions 5. Framing/Mullion Factor: 0.88 (from Table G-10) 6. Interior Shade Type: Double/Nonwhite Drapes 7. SC Shade Open: 0.88 (from Table G-9 or show calculation) 8. SC Shade Closed: 0.75 (from Table G-9 or show calculation) GLAZING, INTERIOR SHADE & FRAMING 9a. 0.88 (SC #7) x 0.88 (FMF #5) 0.77 SC Shade Open 10a.0.75 (SC #8) x 0.88 (FMF #5) = 0.66 SC Shade Closed EXTERIOR SHADE Exterior Shade Type: NO EXTERIOR SHADE OVERHANG FACTOR Glass Ovrhng Dist Glass Proj OH Factor OH Factor Orientation Area Depth Above Height Ratio Shade Open Shade Clsd ----------- ----- ------ ----- ------ ----- ---------- ---------- NO OVERHANGS DOMESTIC HOT WATER WORKSHEET page 12 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Building Permit No Location: Palm Desert Date: 11/1/1988 1 Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- WORKSHEET ONE: STORAGE TYPE GAS OR STORAGE TYPE ELECTRIC FOR SHOWING COMPLIANCE WITH RESIDENTIAL BUILDING ENERGY EFFICIENCY STANDARDS WATER HEATING BUDGETS A EQUIPMENT DATA 1 Water heater type SG Enter SG or SE See Appendix D 2 Manufacturer & Water heating budget 18700 KBtu/yr/unit, see Table 1 3 Model number Tank set temp. Std Gas 50 gal or less 4 Ignition device GP GP, gas pilot or IID, int. ignition device 5 Tank volume 50.0 Total gallons, from CEC Appliance Directory 6 Recovery efficiency 76.0 Percent from CEC Appliance Directory 7 Standby loss 3.1 Percent/hour, from CEC Appliance Directory 8 Rated input 55000 Btu/hr, from CEC Appliance Directory 1 From building plans (total) (1 kWh = 3413 Btu) 9 Number of Heaters 1 From building plans (total) B OPERATING DATA 1 Climate Zone 15 See Appendix D 2 Water heating budget 18700 KBtu/yr/unit, see Table 1 3 Tank set temp. 140 F, fixed input 4 Water main temp. 70.0 F, see Table 1 5 Daily hot water load 50 50 or 35 gallons/unit, see Table 1 6 Ambient air temp. 72.6 F, see Table 1 7 Adj Standby Losses 0.0205 See Table 2 or Appendix B 8. No. dwelling units 1 From building plans (total) 9 Number of pumps 0 From building plans 10 Pumping energy 0.0 Watt-hr/yr per Pump, see Table 3 C WATER HEATING ENERGY CREDITS --------------------------------------------------------------------------- 1 Credit name See Table 5 2 Annual savings 0.0 KBtu/yr/dwelling unit, see Table 5 D CALCULATE ANNUAL WATER HEATING ENERGY (KBtu/yr) --------------------------------------------------------------------------- 1 Recovery load 10539.4 {[B5 x 8.25 x(140-B4)x 365 x 0.001]-C2}x B8 2 Recovery energy 13867.6 D1/A6 3 Standby loss energy 4839.6 {24 - [(D2 x 1000)/(A8 x A9 x 365)]} x 8.25 x A5 x B7 x 365 x (140-B6) x 0.001 x A9 4 Pumping energy 0.0 B9 x B10 x 3.413 x 3 x 0.001 5 Total energy 18707.2 GAS SYSTEMS: (D2 + D3 + D4) / B8 ELECTRIC: {[(D2 + D3) x 3] + D4} / B8 6 Water heating budget comparison -7.2 KBtu/yr/unit B2 - D5 HVAC ZONE HEATING & COOLING LOAD SUMMARY page 13 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- HVAC ZONE DESCRIPTION HVAC Zone Name: HVAC System Name: System Multiplier: Heating Schedule: Cooling Schedule: Fan Schedule: Sizing Method: Relative Humidity: SPACES IN THIS ZONE PEAK. ----------------------- ---- 1ST FLOOR (Jan 12am) TOTAL SPACE LOAD Bypass Ventilation Air ( 0 cfm) Supply Duct Conduction Supply Duct Leakage Supply Fan Heat Gain EFFECTIVE SPACE LOAD Ventilation ( 0 cfm) Return Air Lighting Gain Return Duct Conduction Return Duct Leakage Return Fan Heat Gain TOTAL SYSTEM LOAD SYSTEM PERFORMANCE AT DESIGN CONDITIONS WHOLE HOUSE LENNOX CHP15-411-3P 1 Residential Heating Residential Cooling Residential HVAC & Fans COINCIDENT 50 0 COOLING HEATING ------- PEAK SENSIBLE LATENT 23234 ------- ---- (Aug 2pm) -------- 23009 ------ 1072 23234 -------- 23009 ------ 1072 0 ( 0 cfm) 0 -0 929 920 465 460 21 -884 ------- 884 23744 -------- 25274 ------ 1093 0 ( 0 cfm) 0 -0 0 475 505 475 505 22 -0 0 24693 26285 1115 2.2 tons 0.1 tons 26609 29238 2466 2.4 tons 0.2 tons SPACE HEATING & COOLING LOAD --------------------------------------------------------------------------- SUMMARY page 14 of 20 Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- SUMMARY OF PEAK HOUR LOADS FOR SPACE Space Name: DESIGN CONDITIONS -------------------- Peak Hour: Indoor Conditions: Outdoor Conditions: LOAD COMPONENT Wall Conduction Window Conduction Door Conduction Roof Conduction Skylight Conduction Floor Conduction Slab Conduction Interior Conduction Infiltration Solar Gain Lighting Equipment Occupants SPACE LOADS HEATING Jan 12am 70 F DB 32 F DB Btu/hr 3208 4362 0 1931 0 0 7864 0 5869 23234 Btu/hr 1ST FLOOR COOLING SENSIBLE LATENT Aug 2pm 78 F DB 50 % RH 112 F DB 73 F WB Btu/hr 2316 3710 0 2380 0 0 0 5251 6327 976 976 1073 23009 Btu/hr 1.9 tons Btu/hr 0 1073 1072-Btu/hr 0.1 tons SUPPLY AIR QUANTITIES --------------------- Heating: 23234 Btu/hr / [1.10 * (105 F Supply - 65 F TStat)] = 528 cfm Cooling: 23009 Btu/hr / [1.08 * ( 78 F TStat - 55 F Supply)] = 926 cfm CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 15'of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: RESIDENCE TO GARAGE Assembly Type: Wall Assembly Tilt: 90 deg (Vertical) Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0773 x 0.85 + 0.1849 x 0.15 = 0.0934 Winter U -Value 0.0777 x 0.85 + 0.1877 x 0.15 = 0.0942 OVERALL VALUES ADJUSTED FOR FRAMING I ------------------------------- SketchQof Construction Assembly Absorptivity: 0.70 Roughness: Smooth Plaster, Metal Weight: 6.4 lb/sqft Heat Capacity: 1.84 R -Value 10.70 10.61 U -Value 0.0934 0.0942 Th R -Value Construction Components Fr (in) Summer Winter --------------------------------------------------------------------------- Outside Air Film 0.25 0.17 1. Gypsum or Plaster Board 0.625 0.56 0.56 2. Insulation, Mineral Wool, R-11 * 3.500 11.00 11.00 3. Gypsum or Plaster Board 0.500 0.45 0.45 4. 5. 6. 7. 8. 9. Inside Air Film ---------------------7----------------------------------------------------- 0.68 0.68 Total 12.94 12.86 Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0773 x 0.85 + 0.1849 x 0.15 = 0.0934 Winter U -Value 0.0777 x 0.85 + 0.1877 x 0.15 = 0.0942 OVERALL VALUES ADJUSTED FOR FRAMING I ------------------------------- SketchQof Construction Assembly Absorptivity: 0.70 Roughness: Smooth Plaster, Metal Weight: 6.4 lb/sqft Heat Capacity: 1.84 R -Value 10.70 10.61 U -Value 0.0934 0.0942 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 16 of 20 7-------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: 2X4 R-19 WALL Assembly Type: Wall Assembly Tilt: 90 deg (Vertical) Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0507 x 0.85 + 0.0982 x 0.15 = 0.0578 Winter U -Value 0.0509 x 0.85 + 0.0990 x 0.15 = 0.0581 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Stucco, Wood Shingles Weight: 12.5 lb/sqft Heat Capacity: 2.96 R -Value 17.29 17.20 U -Value 0.0578 0.0581 Th R -Value Construction Components ------------------=-------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Stucco 0.825 0.17 0.17 2. Membrane, Vapor -Permeable Felt 0.010 0.06 0.06 3. Insulation, Polystyrene, Smooth Skin 1.000 5.00 5.00 4. Insulation, Mineral Wool, R-13 * 3.500 13.00 13.00 5. Gypsum or Plaster Board 0.625 0.56 0.56 6. 7. 8. 9. Inside Air Film ------------7-------------------------------------------------------------- 0.68 0.68 Total 19.72 19.64 Framing Percentage: 15.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer U -Value 0.0507 x 0.85 + 0.0982 x 0.15 = 0.0578 Winter U -Value 0.0509 x 0.85 + 0.0990 x 0.15 = 0.0581 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Stucco, Wood Shingles Weight: 12.5 lb/sqft Heat Capacity: 2.96 R -Value 17.29 17.20 U -Value 0.0578 0.0581 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 17 of 20 7-------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN RE,IMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) ( Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: R-30 Roof/Gyp Ceiling Assembly Type: Roof Assembly Tilt: 0 deg (Horizontal Roof) Framing Percentage: 10.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer,U-Value 0.0299 x 0.90 + 0.0778 x 0.10 = 0.0347 Winter U -Value 0.0304 x 0.90 + 0.0815 x 0.10 = 0.0355 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 9.2 lb/sqft Heat Capacity: 2.71 R -Value 28.84 28.14 U -Value 0.0347 0.0355 Th R -Value Construction Components Fr (in) Summer Winter --------------------------------------------------------------------------- Outside Air Film 0.25 0.17 1. Roofing, Asbestos -Cement Shingles 0.250 0.21 0.21 2. Plywood 0.500 0.63 0.63 3. Air Space 12.000 1.00 0.80 4. Insulation, Mineral Wool, R-30 * 9.500 30.00 30.00 5. Gypsum or Plaster Board 0.500 0.45 0.45 6. 7. 8. 9. Inside Air Film --=------------------------------------------------------------------------ 0.92 0.61 Total 33.46 32.87 Framing Percentage: 10.0 % Framing Material: Softwood, Douglas Fir -Larch Calculation for Framing Adjustment Summer,U-Value 0.0299 x 0.90 + 0.0778 x 0.10 = 0.0347 Winter U -Value 0.0304 x 0.90 + 0.0815 x 0.10 = 0.0355 OVERALL VALUES ADJUSTED FOR FRAMING ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 9.2 lb/sqft Heat Capacity: 2.71 R -Value 28.84 28.14 U -Value 0.0347 0.0355 CONSTRUCTION ASSEMBLY COMPLIANCE.FORM CF -3 page 18 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Building Permit No Location: Palm Desert Date: 11/1/1988 i Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: Carpeted Slab Assembly Type: Floor Assembly Tilt: 180 deg (Horizontal Floor) Total 3.22 3.45 f Framing Percentage: 0.0 % Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.01 R -Value 3.22 3.45 U -Value 0.3106 0.2899 Th R -Value Construction Components Fr (in) Summer Winter ---------------------------------------=----------------------------------- Outside Air Film 0.2.5 0.17 1. Concrete, 140 lb, Not Dried 3.500 0.28 0.28 2. Flooring, Carpet and Fibrous Pad 0.250 2.08 2.08 3. 4. 5. 6. 7. 8. 9. Inside Air Film --------------------------------------------------------------------------- 0.61 0.92 Total 3.22 3.45 f Framing Percentage: 0.0 % Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING ------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.01 R -Value 3.22 3.45 U -Value 0.3106 0.2899 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 19 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS I COMPLY 24 v 2.10 Designer: MARTIN REIMERS I Building Permit No I Location: Palm Desert Date: 11/1/1988 I Checked By I Documentation: THOMPSON.SERVICES (R.E. THOMPSON) I Date (User # 1615) --------------------------------------------------------------------------- Assembly Name: Exposed Slab Assembly Type: Floor Assembly Tilt: 180 deg (Horizontal Floor) Framing Percentage: 0.0 Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING I I ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.00 R -Value 1.19 1.42 U -Value 0.8403 0.7042 Th R -Value Construction Components --------------------------------------------------------------------------- Fr (in) Summer Winter Outside Air Film 0.25 0.17 1. Concrete, 140 lb, Not Dried 3.500 0.28 0.28 2. Flooring, Asphalt, Lino, Vinyl or Rubber 0.010 0.05 0.05 3. 4. 5. 6. 7. 8. 9. Inside Air Film --------------------------------------------------------------------------- 0.61 0.92 Total 1.19 1.42 Framing Percentage: 0.0 Framing Material: NONE OVERALL VALUES ADJUSTED FOR FRAMING I I ------------------------------- Sketch of Construction Assembly Absorptivity: 0.70 Roughness: Concrete, Asph. Shingles Weight: 40.9 lb/sqft Heat Capacity: 9.00 R -Value 1.19 1.42 U -Value 0.8403 0.7042 CONSTRUCTION ASSEMBLY COMPLIANCE FORM CF -3 page 20 of 20 --------------------------------------------------------------------------- Project: RESIDENCE FOR MARTIN REIMERS COMPLY 24 v 2.10 Designer: MARTIN REIMERS Location: Palm Desert Date: 11/1/1988 Building Permit No Checked By Documentation: THOMPSON SERVICES (R.E. THOMPSON) Date (User # 1615) ---------------=----------------------------------------------------------- Assembly Name: Double/Nonwhite Drapes Assembly Type: Glazing Th R -Value Construction Components Fr (in) Summer Winter --------------------------------------------------------------------------- Outside Air Film 0.25 0.17 1. CEC Double Glazing 0.500 0.69 -0.69 2. 3. 4. 5. 6. 7. 8. 9. Inside Air Film 0.68 0.68 --------------------------------------------------------------------------- Framing Percentage: 0.0 % Framing Material: NONE ------------------------------- Sketch of Construction Assembly Visible Transmittance: 0.85 Winter Shading Coefficient: 0.88 Summer Shading Coefficient: 0.75 Total 1.62 1.54 OVERALL VALUES ADJUSTED FOR FRAMING R -Value 1.62 1.54 U -Value 0.6179 0.6500