14940 (AR)TAb-f 4 4 Q"
Building
Address 79--960 Cedar Creat
Owner
S.R. vi)$YISCiTf
Address
City Zip
1
D.U. Xeller
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
No. 14940
BUILDING: TYPE CONST: OCC. GRP.
A.P. Number
el.
( Legal Description
Room AdditionlKitchen Remodel
Address
105is Flamingo circle
City,Zip Tel
Big Begg rake f:A� 92315 (909) 584-9i45
State Lic. • City
& Classif. ' .B 36588.0 Lic. #
Arch.,'Engr. I
Designer
Address Tel.
City( Zip I
State
Lic. #
LICENSED CONTRACTOR'S DECLARATION
jI hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section
77000) of,Division 3 ofct�he Bu ess and Professions Code, and my license is in full forccee and
effect. . i S. ! 4
SIGNATURE - DATE
` OWNER -BUILDER DECLARATION
I hereby affirm that I am exempt from the Contractor's License Law for the following
reason: (Sec. .703 1.5, Business and Professions Code: Any city or county which requires a
permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance also
requires the applicant for such permit to file a signed statement that he is licensed pursuant to
the provisions of the Contractor's License law, Chapter 9 (commencing with Section 7000) of
Division 3 of the Business and Professions Code, or Nat. he is exempt therefrom, and the basis
for the alleged exemption. Any violation of Section) 7031.5- by .'any applicant for a permit
subjects the applicant to a civil penalty of not more than rive hundred dollars ($500).
❑ I, as owner of the property, or my employees with wages as their sole compensation, will
do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and
Professions Code: The Contractor's License Law does not apply to an owner of property who
builds or Improves thereon and who does such work himself or through his own employees,
provided, that such improvements are not Intended or offered for sale. ff, however, the building
or Improvement is sold within one year of completion, the owner -builder will have the burden
of proving that he did not build or improve for the purpose of sale.)
O I, as owner of the property, am exclusively contracting with licensed contractors to torr
struct the project. (Sec. 7044, Business and Professions Code: The Contractor's License law.(
does not apply to an, owner or property; who builds or improves thereon, and who contracts loi1�
such projects with a contractor(s) licensed pursuant to the Contractor's License Law.)
❑ 1 am exempt under Sec B. & P.C. for this reason
J
Date Owner �r
WORKERS' COMPENSATlgp DECLARATION
I hereby affirm that I have a certificate of consent to self -insure, or a certificate of
Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.)
Policy No. ,Company
. ❑ Copy is filed with the city. O Certified copy is hereby furnished.
CERTIFICATE OF EXEMPTION FROM
WORKERS' COMPENSATION INSURANCE
(This section need not be completed N the permit is for one hundred dollars_L4MO) va1u84—j
or less.) I I
I certify that in the performance of the work for which this permit is issued, I shall not
employ any person in any:maer so as to become ubject to the Workers' Compensation
Laws of California. �y _ {,�{/ j
ate;t)I-v` K4 i�Owner � t�.�1J��Ls I.
NOTICE TO APPLICANT. N, after making this Certificate of Exemption you should become
subject" to the Workers' Compensation provisions of the Labor Code, you must forthwith'
comply with such provisions or this permit shall be deemed revoked.
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND
SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE
HUNDRED THOUSAND DOLLARS ($100,000), IN ADDITION TO THE COST OF COMPENSATION,
DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND
ATTORNEY'S FEES.
This is'a building permit when properly filled out, signed and validated, and is subject to
expiration if work thereunder is suspended for 180 days.
I certify that I, have read this application and state that the above information is correct.
I agree to comply'with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives -of this city to enter. the •above -..-
mentioned property for inspection purposes.
Signature of applicant —Date—
Mailing
ateMailing Address
City, State, Zip
Sq. Ft. No. No. Dw.
Size 280 Stories Units
New ❑ Add ❑ Alter ❑ Repair ❑ Demolition ❑
Estimated Valuation $21 * 812 600
PERMIT
AMOUNT
Plan Chk. Dep.
Plan Chk. Bal.
145.25
Const.
225.00
Mech.-
15.00
Electrical
27.80
Plum 'ng
30.00
2.10
Grh9ing
Driveway Enc.
Infrastructure -
TOTAL
446.23
REMARK Ca
If I " V
i
ZONE: BY:
Minimum Setback Distances:
Front Setback from Ce ine
Rear Setback from R op. Line
Side Street Setbac Cen
Side Setback fro rope
FINAL DATE 'ANSPECTOR
Issued by:
Validated bv:
CONSTRUCTION ESTIMATE
NO. ELECTRICAL FEES
NO. PLUMBIW FEES
UNDERGROUND
r
1ST FL. SO. FT. ® $
UNITS
ROUGH PLUMB.
2ND FL. SQ. FT.
BONDING
YARD SPKLR SYSTEM
HEATING (ROUGH)
MOBILEHOME SVC.
BAR SINK
POR. SO. FT.
r
ROUGH WIRING t ^ �S
J
GAR. SO. FT. ®
POWER OUTLET
ROOF DRAINS
CAR P. SQ. FT.
DRAINAGE PIPING
WALL SQ. FT.
HEATING (FINAL)
DRINKING FOUNTAIN
SO. FT. ®
GAS (FINAL)
URINAL
ESTIMATED CONSTRUCTION VALUATION $
WATER PIPING
NOTE: Not to be used as property tax valuation
GROUT
FLOOR DRAIN
MECHANICAL FEES
SERVICE
WATER SOFTENER
VENT SYSTEM FAN EVAP.COOL HOOD
SIGN
WASH ER(AUTO)(DISH)
APPLIANCE DRYER
GARBAGE DISPOSAL
FURNACE UNIT WALL FLOOR SUSPENDED
GRADING
cu. yd.
plus x$
LAUNDRYTRAY
AIR HANDLING UNIT CFM
KITCHEN SINK
ABSORPTION SYSTEM B.T.U.
TEMP USE PERMIT SVC
WATER CLOSET'
COMPRESSOR HP
POLE,TEMIPERM
LAVATORY
HEATING SYSTEM FORCED GRAVITY
AMPERES SERV ENT
SHOWER
BOILER B.T.U.
SO. FT. ® c
BATH TUB
SQ. FT. ® c
WATER HEATER
MAX. HEATER OUTPUT, B.T.U.
SQ. FT. RESID ® 11/4 c
SEWAGE DISPOSAL
SQ.FT.GAR ® 3/ic
HOUSE SEWER
SPARK ARRESTOR
GAS PIPING
PERMIT FEE
PERMIT FEE
PERMIT FEE
DBL
TOTAL FEES
MICRO FEE
MECH.FEE PL.CK.FEE
CONST. FEE ELECT. FEE
SMI FEE PLUMB. FEE
STRUCTURE PLUMBING ELECTRICAL HEATING 6 AIR COND. SOLAR
SETBACK
GROUND PLUMBING
UNDERGROUND
A.C. UNIT
COLL. AREA
OgL-SLAB GRADE
ROUGH PLUMB.
BONDING
HEATING (ROUGH)
STORAGE TANK
FORMS
SEWER OR SEPTIC TANK
r
ROUGH WIRING t ^ �S
J
DUCT WORK
ROCK STORAGE
FOUND. REINF.
GAS (ROUGH)
METER LOOP
HEATING (FINAL)
OTHER APPJEQUIP.
REINF. STEEL
GAS (FINAL)
TEMP. POLE
GROUT
WATER HEATER
SERVICE
FINAL INSP.
BOND BEAM
WATER SYSTEM
$
GRADING
cu. yd.
plus x$
=$
LUMBER GR.
FINAL INSP.
FRAMING etl-2g:�A- % S
11
FINAL INSP.
ROOFING
co/t�/
e7
_(
REMARKS:
VENTILATION
FIRE ZONE ROOFING
FIREPLACE
SPARK ARRESTOR
GAR. FIREWALL
LATHING ,sem"'�
MESH
INSULATION/SOUND
FINISH GRADING
FINAL INSPECTION
CERT. OCC.
FENCE FINAL
INSPECTOR'S SIONATURESIINITIALS
GARDEN WALL FINAL
NAR. 10 '95 10:16AM
P.1
PGA WEST 11 RESIDENTIAL ASSOCIATION, INC,
P.O. Box 1262 • La Quint&, CA 92253
9 March 1995
Jaynes R. Johnson
3326 Montellano
Hacienda Heights, CA 91745
Re: Room Addition
- 79-960 Cedar Crest
La Quinta CA 92253
Dear Mr. Johnson:
This letter will serve to confirm our telephone conversation of today in which I informed
YOU that. the Architectural Committee. of PGA West II Residential Association, Inc. had
approved your site, elevation and structural drawings/calculations for the room addition
at 79-960 Cedar Crest. Please forward a copy of this letter to the City of La Ouinta in
order to process your building permit.
Thank you for your cooperation in this matter, and if you should have any further
questions please,do not hesitate to call rq. at (619) 360-4161.
Sincerely,
PGA WEST II RESIDENTIAL, ASSOCIATION, INC.
John H. Handel
Association Manager
cc: Jim Saul
Doug Shipman
Unit Fill;
ns, 3
Certificate of Compliance: Residential (Page t of 2) CF -1 R
,MRI�I�SI ,,T.9M'0.5 `T'0'g/V 0'V s A'VolrJOA) M�4krt-I fb; /Rqs
Project Title Dat.
—q60 1apAr- CAF -S r, PGS! loialr l -A 94r/.yM. M
Project Addrew Buki ng Permit o
. H. 7, 411 D (qoj ) 18,11- 24 2zt Plan check / Date
Documentation Author Telephone
PACI<A4f, n� FOA 4gorrwd (.5 lel hock/ Date
Compilsnce Method (Package, Point System or computer) Glmste � Enforcement Agency Use Only
GENERAL INFORMATION
Total Conditioned Floor Area: .2-1 -1— It
Single Family _ J Addition
Mufti -Family Existing -Plus -Addition
North /(jo/ South / West / All Orientations
(Input orientation in deWees and drde one.)
foNE
Jld _
/ i IOIi►vN i Irrvti t%�uc:w we or Wlh)
Building Type:
(check one or more)
.Front Orientation:
Number of Dwelling Units:
BUILDING SHELL INSULATION
Construction
Component Insulation Assembly Location/Comments
Type R -Value U -Value (attic, to garage, typical, etc.)
Wall .............. - STi1Q r�
Wall ..............
Roof .....:....... R -3A Arrt r✓
Root .............
Floor .............
Floor .............
Slab Edge....
FENESTRATION
Fenestration Area
Orientation (st)
Shading Devices
Fenestration Interior Exterior Overhang Framing Type
U -Value (roller blind, etc.) (shadescreen, etc.) . , (yes/no) (metaUwoodNinyl)
Front..... (N) 140
(z.el:ltk SaI40C N/A/c o T4L
Front..... ( )
L@ft....... (W� g-�1
n.�S
_
Left......
Rear.... (' )
•Rear..... ( )
Right.... ( )
Right..... ( )
Skylight .......
Skylight .....
TOTAL 4LAss )3L1 j=T2
THERMAL MASS
N � y ¢4 LA 2 n14 = e4ASS�13O t Y o = 44 FT Z � S-71 = 16 % . o . k . .
Type/covering .
Area Thickness
(slab/exposed. tile, etc.)
(SI) (inches) Location/Description (kitchen, hath, etc.) -
T -1 L.E
80 4i1 1--17-CR6 G
8o FTS. - 277
Rovtwd December 1992
Certificate of Compliance: Residential (Page 2 of 2) CF -1 R
>L. m2S- jamso.4's A4DIT/oIJ H -4&H lo, 1995
Project Title Date
HVAC SYSTEMS
Note: Input hydronic or combined hydronic data under Water Heating Systems, except Design Heating Load.
Distribution
Heating Equipment Minimum Type and Duct or
Type (furnace, heat Efficiency Location Piping Thermostat
pump, etc.) (AFUE/HSPF) (ducts/attic, etc.) R -Value Type
Heat Pump
Configuration
(split or package)
Cooling Equipment Minimum Duct
Type (air conditioner, Efficiency Location
Duct
Thermostat
Configuration
heat pump, evap. cooling) (SEER) (attic, etc.)
R -Value
Type
(split or package)
15T 14
WATER HEATING SYSTEMS
Energy'
External
Rated'
Tank
Factor or
Tank
Water Heater Distribution Number Input (kW
Capacity
Recovery Standby' Insulation
Tvae T-vDe in Svstem or Btu/hr)
(gallons)
Efficiency Loss
M) R -Value
1. For small gas storage (rated input15 75,000 Btu/hr), electric resistance and heat pump water heaters, list Energy Factor.
For large gas storage water heaters (rated input 2 75,000 Btu/hr), list Rated Input, Recovery Efficiency and Standby Loss.
For Instantaneous gas water heaters, list Rated Input and Recovery Efficiency.
SPECIAL FEATURES/REMARKS (Add extra sheets if necessary)
NA
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and performance specifications needed to comply with Title 24, Parts t and 6, of
the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the
individual with overall design responsibility. When this certificate of compliance is submitted for a single building plan to be built in mulfiple
orientations, any shading feature that is varied is indicated in the Special Features/Remarks section.
D@signer.or Owner (per Business & Professions Code)
Name: 1`12_ -T1M Tn//n1.Cn..O
Title/Firm: l)M 1014/2sa A 4-uoe-
Address: 221( HACrENI(4 P i y4- #2,15'
11 C14404 04 izua CA. g17!�45
Telephone: ( S L S 341oy
L'ic. tt:
(signs r) (date)
Enforcement Agency
Name:
Title:
Agency:
Telephone:
(signature/stamp) (date)
Revised December 1992
Documentation Author
Name: U o SS JC i t4 7_A M 0
Title/Firm: _M SS' L
Address: C`
lel I N Sol _
Telephone: a, ( ->P – 2
�n Cr
rn w
2
(signature) RE5-88-2021 (date)
F,yFRGY PtP�S
Mandatory Measures Checklist: Residential MF -1 R
NOTE: Lownse residential buildings subject to the Standards must contain these measures regardless of the compliance
approach used. Items marked with an asterisk (') may be supersedes by more stringent compliance requirements
listed on the Certificate of Compliance. When this checklist is incorporated into the permit documents, the features
noted shall be considered by all parties as binding minimum component performance specifications for the
mandatory measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION I DESIGNER ENFORCEMENT j
Building Envelope Measures i ES I
• §I50(a): Minimum R-19 ceiling insulation.
_ 38
§150(b): loose fill insulation manufacturer's labeled R -Value.
N
• §I 50(c): Minimum R-13 wall insulation in framed walls (does not apply to exterior mass walls).
- 3
111150(d): Minimum R-13 raised floor insuiation in framed floors; minimum R-8 in concrete raised floors.
N/
§150(1): Slab edge insulation • water absorption rate no greater than 0.3%, water vapor transmission rate no
����
greater than 2:0 perm/inch.§1IS:
Insulation specified or installed meets California Energy Commission quality standards.
Indicate
type and form.
§116-17: Fenestration Products, Exterior Doors and InfiltratioNExfiltration Controls
a. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
b. Manufactured fenestration products have label with certified U•value, and infiltration certification.
c. Exterior doors and windows weather:tripped; all joints; and penetrations caulked and sealed.
§150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
N �
§150(4: Special infiltration barrier imialled to comply with §151 meets Commission quality standards.
�S
§150(e): Installations of Fireplaces, Decorative Gast Appliances and Gas Logs
1. Masonry and factory -built fireplaces haw:
a Closeable metal or glass dos `
b. Outside air intake with damper and control
c. Flue damper and control
2. No continuous burning gas pilots allowed.
Space Conditioning, Water Heating and Plumbing System Measures
§110.13: HVAC equipmerst, water heaters, showerheads and faucets certified by the Commission.
§150(1): Setback thermostat on all applicable heating systems.
§150(j): Pipe and Tank Insulation
I . Indirect hot water tanks (e.g., unfired storage tanks or badwp solar hot water tanks) have insuLifim
blanket (R•12 or greater) or combined interior/exterior insulation (R-16 or greater).
2. Fust 5 feet of pipes closest to water heater tank, non-redreulatiN systems, insulated (R4 or greater).
3. All buried or exposed piping insulated in f9draslating sections of hot waw system.
4. Cooling system piping below 55OF insulated.
5. Piping insulated between heating source and indirect hot water tank
• §150(m): Ducts and Fans
1. Ducts constructed, installed and sealed to comply with UMC Sections 1002 and 1004; ducts insulated
to a minimum installed value of R-4.2 or ducts enclosed entirely within cwditiorwd space.
2. Exhaust fan -systems have backdraft or automatic dampers
3. Gravity ventilating systems serving conditioned space have either automatic or readily accessible,
manually operated dampers..
§114: Pod and spa Heating Systems and Equipment
1. System is certified with 780/9 thermal efficiency, on-off switch, weatherproof operating instructions,
no electric resistance heating and no pilot light
2. System is installed with:
a At least 36' pipe between filter and heater for future solar healing.
b. Cover for outdoor pools or outdoor spa.
3. Pod system has directional inlets and a circulation pu*Wne'sriich.
§115: Gas-fired central furnace, pool heater, spa heater or household cooking appliance have no.
continuously buring pial light. (Exception: Non -electrical 000king applwta with pilot c 150 Btulltr.)
Ughting Measures
§150(k): 40 lumenw wad or greater for general lighting ip.kitdtefts WdVC t6 Wilh.water dmfs; and
recessed ding factures IC (insulation cover) apprgved... .... 9,......
GC¢EieK�i.:, .. .... old... ..•U.
Reviaed January 1992
U.
7.2. COMPLIANCE ANALYSIS OF
AN ADDITION ALONE
Any addition — that is. the sum of all new
conditioned spaces and associated new exterior
walls. ceilings. and floors within the building
may be shown to meet the energy budget as a
separate entity. This procedum does not involve
the existing structure, except when calculating the
water heating energy use for any addition in which
the total number of water heaters in the building
increases. The analysis may be performed using
either a special prescriptive package according to
the size of the addition or with the point system or
any approved computer performance method.
Table 7-1: Prescriptive Compliance of Additions -
Summary of Section 15'mis of the Standards
COMPONENT S100ft2210S00-999 ft2
a 1000 0
Insulation
Ceilitg
R-19
Package!
Package
Package
wan
R-13
R-13
R-13
Package
Floor
R-13
Package
Package
Package
Fenestration
U -Value
0.75
0.75
Package
Package
% of CFA
S 50 e
g + Removed4
Pkg + Removed
Package
Shading
n/a
Package
Package
Package
Thermal Mass
n/a
Package
Package
Package
Space Heating
Mandatorys
Package
Package
Package
. & Cooling —
(No electric)
(No electric)
(No electric)
(No electric)
Water Heating -
No Increase &
No Change
Na
N
Na
Na
Replacement:
No Increase
Standard
Standard
Standard
Standard
Increase
Allowed
Allowed
Allowed
Allowed
w/Calculation$
w/CalcWa ion
w/Calculation
w/Calcvlation
1. Meet the component prescriptive requirement for Package D for slab -on -grade construction or
Package E for raised floor construction (see Chapter 3).
2. "Heavy" and "Light Mass" mass walls may meet the Package D or E requirements for mass wall
insulation instead of R-13 (see Chapter 3).
3. For compliance of additions and alterations only, dual glazed "greenhouse" windows and skylights
may be assumed to meet this requirement.
4. The Package D or E fenestration area plus the area of any glazing removed because of the addition.
S. All mandatory measures for HVAC systems must be met (set Chapter 2).
6. No electric resistance space heating may be installed.
7. A standard water heating system is explained is Section 6.6.
8. If the total number of water heaters increases in the residence, then the entire existing plus addition
system must meet the water heating energy budget (see Chapter 6). Table 3.4 lists water heating
system combinations which have been pre -calculated to sotnQly with the water heating budget.
7-4 Revised January 1992 Residential Manual
Table 3-215: Prescriptive Packages for Climate Zone 15
Package
Package
Package
CPakagej
Package
Component
A
B
C11
16%
E
BUILDING ENVELOPE
16%
Maximum Total Nonsouth Facing Area
9.6%
NR
NR
Insulation Minimums:
NR
Minimum South Facing Area
6.4%
NR
NR
Ceiling
R-30
R-38
R-49
R-38
R-38
Walll
R-19
R-19
R-29
R-21
R-21
"Heavy" Wall
'(R-5.5)
(R-4.5)
N/A
(R-4.76)
(R-4.76)
"Light Mass" Wall
(R-7.0]
[R-6.0]
N/A
N/A
N/A
• Slab Floor Perimeter
R-7
R-7
R-7
NR
NR2
Raised Floor
R-19
R-19
R-21
R-193
R-19
FENESTRATION
Maximum U-Value12
0.65
0.65
0.40
0.65
0.65
Maximum Total Area
NR
16%
16%
16%
16%
Maximum Total Nonsouth Facing Area
9.6%
NR
NR
NR
NR
Minimum South Facing Area
6.4%
NR
NR
NR
NR
SHADING COEFFICIENTt
South Facing Glazing
0.15
0.15
0.40
0.40
0.40
West Facing Glazing
0.15
0.15
0.40
0.40
0.40
East Facing Glazing
NR
NR
0.40
0.40
0.40
North Facing Glazing
NR
NR
0.66
0.66
0.66
THERMAL MASSS
REQ
NR
REQ
20%
5%
INFILTRATION CONTROL
Continuous Barrier
NR
REQ
NR
NR
NR
Air-to-Aw Heat Exchanger
NR
REQ
NR
NR
NR
SPACE HEATING SYSTEM6
Electric Resitance Allowed
NO
NO
YES
NO
NO
If Gas. AFUE=
78%
78%
78%
78%
78%
If Heat Pump,
Split System HSPFs =
6.8
6.8
6.8
6.8
6.8
Single Package System HSPF =
6.6
6.6
6.6
6.6
6.6
SPACE COOLING SYSTEM
If Split System A/C. SEER =
10.0
10.0
10.0
10.0
10.0
If Single Package ATC. SEER9 =
9.7
9.7
9.7
9.7
9.7
DOMESTIC WATER HEATING TYPE
System must meet budget.
Meets
Meets
Meets 10
Meets
Meets
see §151(b) and 151(f)(8)
Budget
Budget
Budget
Budget
Budget
LEGEND: NR = Not Required; N/A = Not Applicable; REQ = Required
See notes following Table 3-Z 16.
ta•
Prescriptive Packages Revised January 1992 3-35
Notes To The Prescriptive Packages In Tables 341 Through 3416
1. The value in parentheses is the minimum R -value for the entire wall assembly excluding interior and
exterior air films if -the wall weight exceeds 40 pounds per square foot. The value in brackets is the
minimum R -value for the entire assembly if the heat capacity of the wall mats or exceeds the result of
multiplying the bracketed minimum R -value by 0.65. The insulation must be integral with or installed on
the outside of the exterior mass. The inside surface of the thermal mass, including plaster or gypsum board
in direct contract with the masonry wall. shall be exposed to the room air. The exterior wall used to meet
the R -value in parentheses can not also be used to meet the above thermal mass requirement.
2. Use Package E if the proposed building is based on a raised floor. If Package E requires slab irtSulation
(Climate Zone 16), the insulation must be installed along any slab portions of the raised floor building,
except for portions to which the exceptions in Section 151(f)LB apply.•
I. Use Package D if the proposed building is based on a slab floor. Package D requires raised floor insulation
to be installed under any, raised floor portion of the slab floor building.
4. - A combined shading coefficient (SC) of 0.66 corresponds to clear dual glazing fenestration products with
standard -exterior and interior shading devices, such as insect screens and light drapes. If the package
specifies a shading coefficient of 0.66. the building official shall assume that standard exterior and interior
shading will be installed by the builder or occupant. If the package specifies a shading coefficient of 0.40 or
lower, the builder shall meet the requirements of Section 151(f)3.
5. If the package requires thermal mass, meet the requirements of 1151(f)4. When using the performance
approach, the mass requirement for Package D is based on having 20% of the ground floor slab area
exposed to conditioned space with no thermal resistance material on the surrfage. The remaining 80% of the
ground floor slab area has a surface It -value of 2.0.. The slab is composed of concrete at least W thick with
a volumetric heat capacity of 28, a conductivity of 0.98 and a surface conductance of 1.3.
The mass requirement for Package E is based on having mass equivalent in performance to 5% of the
ground floor area of an exposed Y thick concrete slab with a volumetric heat capacity of 28. a conductivity
of 0.98. a surface conductance of 13 and no thenl resistance on the sutiace.
6. Automatic setback thermostats must be installed in conjunction with all space heating systems, in
accordance with 1151(09 of rho Standards (see Chapter 2 forexceptions).
7. Ducts in Package C shall be insulated to an installed value of at least R4.
S. HSPF means "Heating Seasonal Performance Factor."
9. Until January .1..1993. the minimum SEER for single package air conditioner systems is 8.9.
10. Electric resistance water heating is allowed as the main heat source in Package C only if the water heater is
located within the building envelope and a minimum of 25% of the energy for water heating is provided by
a passive or active solar system or a wood stove boiler. The wood stove boiler credit is not allowed in
climate zones 8, 10 and 15, nor in locati Wo that do not allow wood stoves.
11. Package C is the only package that allows electric space heating. Package C may be used only if the
building is in an area (1) where natural gas is not currently available. and (2) where extension of natural gas
service i mprwdcal, as determined by the natural gas utility.
12.. The fenestration U -value rating procedures and labeling requirements of Section 116(&)2 go into effect on
July 1. IM for all fenestration products except dual -pane, aluminum -frame fenestration products, for which
the procedures and requirements are optional until July 1. 1993. During this one-year period: (1) if
prescriptive package D or E is used. dual -pane, alumunlum-flame glazing may be assumed to meet the
U -value specified in the package used; (2) if a performance method is used, dual -pane, aluminum -frame
glazing may be assumed to have the U -value specified in the package (D or E) on which the parformaoce
budget is baled.
Prescriptive Packages Revised January 1992 3-37