The URL can be used to link to this page

13-1663 (AR)P.O. BOX 1504 T4ht 4 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Application Number: 13-00001663 Property Address: 77640 CALLE ARROBA APN: 774-123-025-12 -000000- Application description: ADDITION - RESIDENTIAL Property Zoning: COVE RESIDENTIAL Application valuation: 25855 Applicant: Architect or Engineer: 0U) N ------------------ LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that 1 am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: - - --- - - - - - - License No.: E FOOTAGE Date: Contractor: OWNER -BUILDER DECLARATION , I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any yppl''canI for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: G as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon,and who contracts for the projects with a contractor(s) licensed �'�,� pursuant to the Contractors' State License Law.) am exempt under Sec. , BAP.C. for this reason Date: y 25 /,q own; CONSTRUCTIOI LENDING AGENCY 1 hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPERMIT VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 4/25/14 Owner: FARRINGTON PAUL G 77640 CALLE ARROBA LA QUINTA, CA 9225 ( ; .I 09i Contractor: J ,� Owner {ern? �.. t Lic. No.: E FOOTAGE ----------------------------------------------- WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. _ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor .Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier 2010 Policy Number en Y that, in the performance of the work for which this permit is issued, I shall not employ any C. person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor for wi omp those provisions. Date: � � Applicat n��_�� WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS (5100,000) IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each'person at whose request and for t whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to buildint const ction, and hereby authorize representatives of this county to enter upon the above-mentioned propertynsio urp seDate:" -Z7 Signature (Applicant or Agen- Application Number . . . . . 13-00001663 Permit . . . ROOM ADDITION 2013 Additional desc . Permit Fee . . . . 181.61 Plan Check Fee 00 Issue Date Valuation . . . . 0 Expiration Date 10/22/14 Qty Unit Charge Per Extension 1.00 120.1200 LS MISC ROOM ADDN, 1ST 100 SF 120.12 1.00 ---------------------------------------------------------------------------- 61.4900 EA MISC ROOM ADDN, ADDL 500 SF 61.49 Permit . . . ELECTRICAL 2013 Additional desc . . Permit Fee . . . . 47.66 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date 10/22/14 Qty Unit Charge Per Extension 1.00 23.8300 LS ELEC FIXTURES, FIRST 20 23.83 1.00 ' ---------------------------------------------------------------------------- 23.8300 EA ELEC SERVICES 23.83 Permit . . . MECHANICAL 2013 Additional desc . . Permit Fee . . . . 95.34 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 10/22/14 Qty . Unit Charge Per Extension 1.00 35.7500 EA MECH FURNACE 35.75 1.00 11.9200 EA MECH APPL REP/ALT 11.92 1.00 35.7500 EA MECH CONDENSER/COMP 35.75 1.00 ---------------------------------------------------------------------------- 11.9200 EA MECH VENT FAN 11.92 Permit . . . PLUMBING 2013 Additional desc . . Permit Fee . . . . 47.68 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date 10/22/14 Qty Unit Charge Per Extension 3.00 11.9200 EA PLBG FIXTURE/TRAP 35.76 1.00 11.9200 EA PLBG WATER INST/ALT/REP 11.92 ---------------------------------------------------------------------------- Special Notes and Comments NEW DETACHED CASITA, 452 SQ. FT. LQPERMIT Application Number 13-00001663 ----------------------------------------7----------------------------------- Special Notes and Comments April 25, 2014 10:12:13 AM jjohnson. ---------------------------------------------------------------------------- Other Fees . . ... . . . . . BLDG STDS ADMIN (SB1473) - 1.00 PLAN CHECK, ELECTRICAL 35.75 PLAN CHECK, ROOM ADDITION 185.90 PLAN CHECK, MECHANICAL. 52.43 PLAN CHECK, PLUMBING . 47.68 STRONG MOTION (SMI) - RES 2.59 Fee summary Charged. Paid. Credited Due ----------------- Permit Fee Total ---------- 372.29 ---------- .00 -------------------- .00 372.29 .Plan Check Total .00 .00 .00 .00 Other Fee Total 325.35 .00 .00 325.35 Grand Total 697.64 .00 .00 697.64 LQPERMIT Bin # City of La Quinta Building &r Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253: (760) 777-7012 Building Permit Application and Tracking Sheet Permit # Project Address: 4 0 OWE— A 2 Po B Owner's Name: 'Piwd F•laeY i n ILO,--% A. P. Number: %�� — S7 — O Q 9 6 Address: - % 6., q c C u l l < A.riu h Legal Description: City, ST, Zip: Contractor:.O 6 Telephone: � r-> Address: Project Description: Cte5% 0 t ttcAl City, ST, Zip: Telephone: :i::j:v?>:%•:i rt::i:Jfk`T:4�n:% i:y;:;.iii .:.;<:<?;;»;<><:'s:;•r;>;:c;:>?•:�:'<.^�:<;::s>;:- State Lie. # : City Lie. #; • Arch., Engr., Designer: � i �� YL— Address: • City., ST, Zip: Telephone: > .... �.:.,:...>• •::.,.:. •:::.::::;..;,:::.:.;..;:., .:.•::.?r:;::.;:::.:.<.: ;;?;;>�:;>:#::::<:;s;<:?�:�:: Construction Type: Occupancy. . Project type circle one): New Add'n Alter • Repair Demo State Lic. # t' >?' %-'w' `" ` ''` ` >"` '`='w= Name of Contact Person: �L-',- ^e�_J' r n 1 14 /l . Sq. Ft -:k-,5-2 #Stories: # Units: Telephone # ofContact Person: �(�� fj'7�j p Qj� Estimated Value of Project: 20000 - APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Rec'd TRACKING PERMIT FEES Pian Sets Plan Check submitted G Zh-.? Item Amount Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Cales. Called Contact Person Plan Check Balance Title2 4 Cales. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2" Review, ready for correctio (s/issue Electrical SubcontactorUst Called Contact Person Z Plumbing Grant Deed Plans picked up S.M.I. O ' () = H.O.A. Approval Plans resubmitted Grading IN HOUSE:- Reyiew, ready for corrections/issue Developer Im act Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue \ School Fees Total Permit Fees P.O. BOX 1504 LA QUINTA, CALIFORNIA 92247-1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT PROPERTY O WNER' S PACKAGE (760) 777-7012 FAX (760) 777-7011 Disclosures & Forms for Owner -Builders Applying for Construction Permits IlWORTAI ! NOUCE TO FROEERTYOWNER Dear Property Owner. An. a"lication for a building permit has been submitted in your name listing yourself as the builder of the property improvements specified at -) -1 G v 0 C, / Lc Ar r &: iX— We ane providing you with an Owner -Builder Acknowledgment and Information -Verification Form to make you aware of your responsibilities and possible risk you may incur by having this -permit issued • in your tame as the Owner -Builder. We will not issue a building permit until you have read, initialed your understanding of each'provision, signed, and returned this form to us at our official address indicated. An agent of the owner cannot execute this notice unless you, the property owner, obtain the prior approval of the permitting authority. OZ'S AQQiQ t&A 1T AND-VERMCATWN Of P QII TJ N DIRECTIONS: Read and initial each statement below to signify you understand or ver#ythis information. 1. I understand a frequent practice of unlicensed persons is to have the property owner obtain an "Owner -Builder" wilding permit that erroneously implies that the property owner is providing his or her own labor and material personally. 1, as an Owner -Builder, may be held liable and subject to serious financial risk for any injuries sustained by an unlicensed person and his or her employees while working on my property. My homeowner's insurance may not provide coverage for those injuries. I am willfully acting as an Owner -Builder and am aware of the limits of my insurance -coverage for injuries to workers on my piny �. I understand building permits are not required to be signed by property owners unless they are responsible for the construction and are not hiring a licensed Contractor to assume this responsibility. �3. I understand as an "Owner-Buildee' I am the responsible party of record on the permit. I understand that I may protect myself from potential financial risk by hiring a licensed Contractor and having the permit filed in his or her naive instead of my own. -4. I understand Contractors are required by law to be licensed and bonded in California and to list their license numbers on °permits and contracts. �L5.1 understand if I employ or otherwise engage any persons, other than California licensed Contractors, and the total value of my construction is at least five hundred dollars ($500), including labor and materials, I may be considered an "employer" under state and federal law. I understand if I am considered an "employer" under state and federal law, I must register with the state and federal government, withhold payroll taxes, provide workers' compensation disability insurance, and contribute to unemployment compensation for each "employee." I also understand my failure to abide by these laws may subject me to serious financial risk 7. I understand under California Contractors' State License Law, an Owner -Builder who builds single-family residential /structures cannot legally build them with the intent to offer them for sale, unless all work is performed by licensed subcontractors and the number of structures does not exceed four within any calendar year, or all of the work is performed under contract with a licensed general building Contractor. . I understand as an Owner -Builder if I sell the property for which this permit is issued, I .may be he'd liable. for any, financial or personal_ iyjaries sustained. by any subsequent owner(s) that result from any latent construction defects in the worlumanship or materials. 9: I understand I may obtain more information regarding my obligations as an "employee" from the internal Revenue ervice, the United States Small Business Administration, the California Department of Benefit Payments, and the California Division of Industrial Accidents. I also understand I may contact the California Contractors' State License Board (CSLB) at 1- 800-321-CSLB (2752) or www.csib.ca.gov for more information about licensed contractors. 1071 am aware of and consent to an Owner -Builder building permit applied for in my name, and understand that I am the party legally and financially responsible . for proposed construction activity at the following address: 1 L I agree that, as the party legally and financially responsible for this proposed construction activity, I will abide by all applicable laws and requirements that govern Owner -Builders as well as employers. 2. I agree to notify the issuer of this form immediately of any additions; deletions, or changes to any of the information I `have provided on this form. Licensed contractors are regulated by laws designed to protect the public. If you contract with someone who .does not have a license,. the Contractors' State License Board may be unable to Mi-st-you Vith any financial loss you may sustain as a result of a complaint Your only remedy against unlicensed Contractors may be in civil court. It is also important for you tounderstand that if an unlicensed Contractor or employee of that individual or firm is injured while working on your property; you may be held. liable for damages. If you obtain a permit as Owner -Builder and wistr to hire Contractors, you will be responsible for verifying vAwffier or not those Contractors are property licensed and the status of tkir workers' compensation insurance coverage. Before a building permit can be issued, this form must be completed and signed by the property owner and returned to the agency responsible for isstdg.the. .permit Note: A copy of eke property owner's ver'slicense# forum notadcMIM or other verification acceptable to the agency is required to be presented when the permit is inued to verify the properly owner's signature. j✓/ f � Signature of property owner Date: 1.227 /3 Note: The following Authorization Form is required to be completed by the property owner only when designating an agent of the property owner to apply for a construction permit for the Owner -Builder. AUTHORIZATION OF AGENT TO ACT ON PROPERTY OWNER'S BEHALF Excluding the Notice to Property Owner, the execution of which I understand. is my personal responsibility, I hereby authorize -the following person(s) to act as my agent(s) to apply for, sign, and file~the documents necessary to obtain an Owner -Builder Permit for my project Scope of Construction Project (or Description of Work): Project Location or Address: Name of Authorized Agent: Address of Authorized Agent: Tel No I declare under penalty of perjury that I am the property owner for the address listed above and I personally filled out the above information and certify its accuracy. Note: A copy of the owner's driver's license, form notarization, or other verification acceptable to the agency is required to be presented when the permit is issued to verify the property owner's signature. Property Owner's Signature: Date: Date 4/7/14 No. 32047 Owner Farrington, Paul Address 77-640 Calle Arroba City La Quinta Zip Tract # Type Single Family Residence CERTIFICATE OF COMPLIANCE Desert Sands Unified School District 47950 Dune Palms Road La Quinta, CA 92253 (760) 771-8515 APN # Jurisdiction Permit # No. of Units o��mb fi, k� Q BERMUDA DUNES O CA RANCHO MIRAGE d INDIAN WELLS c3i PALM DESERT tj> LA QUINTA 4�' QINDIO y� 0 760-578-0888 La Quinta 1 Lot # No. Street S.F. Lot # No. Street S.F. Unit 1 77640 Calle Arroba 452 Unit 6 Unit 2 Unit 7 Unit 3 Unit 8 Unit 4 Unit 9 Unit 5 Unit 10 Comments At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under 500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason: Detached Accessory Structure This certifies that school facility fees imposed pursuant to in the amount of $3.20 X 452 S.F. or $1,446.40 have been paid for the property listed above and that building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued. Fees Paid By Paul Farrington/Cash Check No. 0.00 Bank Name/Recipient of Certificate Telephone 760-578-0888 Funding Residential By Dr. Gary Rutherford Superintendent Fee collected /exemm ted by a Lara11 Payment Recd $1,446.40 Over/Under Signature NOTICE: Pursuant to(Government Code Section 66020(d)(1), this will serve to notify you that the 90 -day approval period in which you may protest the fees or other payment identified above will begin to run from the date on which the building or installation permit for this project is issued, or from the date on which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier. NOTICE: This Document NOT VALID without embossed seal Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting I BUILDING ENERGY ANALYSIS REPORT I PROJECT: Casita 77-640 Calle Arroba La Quinta, CA Project Designer: Report Prepared by: Joan D. Hacker Insu-form, Inc. 77810 Las Montanas Road, Suite 201 Palm Desert, Ca 92211 760-345-1352 ECEIVED APR 0,8 2014 CITY OF LA QUINTA IMUNiTY DEVEWPMENT Job Number: Date: 4/7/2014 CITY OF 1eup,a QUIT � A SAFETY E EPT. The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has;app[ovf ant authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Buildingrt66e gy Efficiency-8ttafrdards, 1 lirflo This program developed by EnergySoft, LLC — www.energysoft.com ! . / k PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name Casita Building Type ® Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 4/7/2014 Project Address 77-640 Calle Arroba La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 452 Addition n/a # of Stories 1 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity Features see Part 2 of 5 Status Slab Unheated Slab -on -Grade None 452 Perim = 18' New Wall Wood Framed R-13 769 New Roof Wood Framed Attic R-38 512 Radiant Barrier New FENESTRATION U- Orientation Area Factor Exterior SHGC Overhang Sidefins Shades Status Front (E) 49.4 0.500 0.38 2.0 none Bug Screen New Left (S) 16.0 0.500 0.38 2.0 none Bug Screen New Rear (tM 8.0 0.500 0.38 2.0 none Bug Screen New HVAC SYSTEMS Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Electric 3.50 HSPF Room PTAC without Sic 9.4 EER Setback New HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status Casita Ductless/ with Fan Ductless n/a n/a New I--- I f Y"OFIAno11 WATER HEATING BUILDING &� �D� SAFETY p Ot . Type Gallons Min. Eff Distribution A Dojn6S,tatus 1 Instant Elec 0 0.99 No Pipe Insulation FOR C n y IQ—Tl w . .ff DATE Ener Pro 5.1 by EnergySoft User Number.' 2655 RunCode: 2014-04-07711:56:34 ID: P5 - e 3-51" TA °T. PERFORMANCE CERTIFICATE: Residential Part 2 of 5 CF -1 R Project Name Casita Building Type ® Single Family ❑ Addition Alone 1 ❑ Multi Family ❑ Existing+ Addition/Alteration Date 4/7/2014 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. HIGH MASS Design - Verify Thermal Mass: 452.0 ft2 Exposed Slab Floor, 3.500" thick at Casita The Roof R-38 Roof Attic includes credit for a Radiant Barrier that is Continuous meeting eligibility and installation criteria as specified in Residential Appendix RA4.2.2. HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF -4R form for each of the measures listed below for final to be given. r------ -Y_ ul I Ulr-- LA QUINTA R_ ? III n4hlr-� Q C' A rr-�, r. .... I FOR CONSTRUCTION DAT EnergyPro5.1 byEnerg ySoft User Number: 2655 RunCode: 2014-04-07T11:56:34 ID: Pa e 4 of 11 PERFORMANCE CERTIFICATE: Residential Part 3 of 5 CF -1 R Project Name Building Type m Single Family ❑ Addition Alone Date Casita ❑ Multi Family ❑ Existing+ Addition/Alteration 4/7/2014 ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/ft2- r Space Heating 2.86 4.52 -1.66 Space Cooling 119.14 105.29 13.86 Fans 20.46 21.95 -1.49 Domestic Hot Water 48.75 57.72 -8.97 Pumps 0.00 0.00 0.00 Totals 191.22 189.48 1.73 Percent Better Than Standard: 0.9% BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (E) 90 deg Ext. Walls/Roof Wall Area Area Number of Dwelling Units: 1.00 (E) 197 49 Fuel Available at Site: Natural Gas (S) 224 16 Raised Floor Area: 0 (vv) 197 8 Slab on Grade Area: 452 (N) 224 0 Average Ceiling Height: 8.5 Roof 512 0 Fenestration Average U -Factor: 0.50 TOTAL: 73 Average SHGC: 0.38 Fenestration/CFA Ratio: 16.2% REMARKS STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and complete. Documentation Author Company Insu-form, Inc. 4/,f/2014 Address 77810 Las Montanas Road, Suite 201 Name Joan D. Hacker City/State/ZipCity/State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 Sigftd Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and workshkeets, with thesspecification-s—an with any other calculations submitted with this permit application, and recognizes that compliance usingldulct des"ign,NT duct sealing, verification of refrigerant charge, insulation installation quality, and building>"envelopetsealing requ�re7 DEP ! installer testing and certification and field verification by an approved HERS rater. �p-� ��` , ED Designer or Owner (per Business & Professions Code) FOR CONSTRUCTION Company Address Name QATF N City/State/Zip Phone Si'§n2d L-icease ........Date Ene Pro 5.1 by Ener Soft User Number: 2655 Run Code: 2014.04.07711:56:34 ID: Page 5 of 11 CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CF-1 R Project Name Casita Building Type m Single Family ❑ Multi Family ❑ Addition Alone ❑ Existing+ Addition/Alteration Date 4/7/2014 OPAQUE SURFACE DETAILS Surface U- Insulation Joint Appendix Type Area Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Slab 452 0.730 None 0 180 New 4.4.7-A1 Casita Wall 148 0.102 R-13 90 90 New 4.3.1-A3 Casita Wall 208 0.102 R-13 180 90 New 4.3.1-A3 Casita Wall 189 0.102.R-13 270 90 New 4.3.1-A3 Casita Wall 224 0.102 R-13 0 90 New 4.3.1-A3 Casita Roof 512 0.025 R-38 90 0 New 4.2.1-A21 Casita FENESTRATION SURFACE DETAILS ID Type Area Ll-Factor' SHGC2 Azm Status Glazing Type Location/Comments 1 Window 33.4 0.500 NFRC 0.38 1 NFRC 90 New IWC 6200 Alum/Low-E Casita 2 Window 16.0 0.500 NFRC 0.38 NFRC 90 New IWC 6200 Alurnkow-E Casita 3 Window 16.0 0.500 NFRC 0.38 NFRC 180 New IWC 6200 Alum/Low-E Casita 4 Window 8.0 0.500 NFRC 0.38 NFRC 270 New IWC 6200 Alum/Low-E Casita (1) Ll-Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-13 = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS Window ID Exterior Shade Type SHGC H M Wd Ove hang Len H t I LExt RExt Left Fin Right Fin Dist Len H t Dist Len H t 1 Bug Screen 0.76 6.8 5.0 2.0 0.11 2.0 2.0 2 Bug Screen 0.76 4.0 4.0 2.0 0.1 2.0 2.0 3 Bug Screen 0.76 4.0 4.0 2.0 0.1 2.0 2.0 4 Bug Screen 0.76 4.0 2.0 2.0 0.1 2.0 2.0 IiN 1 i t7UA UI.\t_:. & .S: kf'-LI `Y -I-P - -� -- iN't rr- I t a GMNS b Fill - . ON 1 DATE BY EnergyPro 5.1 by Ener Soft User Number: 2655 RunCode: 2014-04-07711:56:34 ID: - a e-,6Pof,9,1 CERTIFICATE OF COMPLIANCE: Residential Part 5 of 5 CF-1 R Project Name Casita Building Type ❑ Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 4/7/2014 BUILDING ZONE INFORMATION System Name Zone Name Floor Area ft New Existing Altered Removed Volume Year Built Casita Casita 452 3,842 Totals 1 4521 01 01 01 1 HVAC SYSTEMS System Name Qty. I Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status Casita 1 I Electric 3.50 HSPF Room PTAC without Sidi 9.4 EER Setback New HVAC DISTRIBUTION System Name Heating Duct Ducts Cooling Duct Location R-Value Tested? Status Casita Ductless/ with Fan Ductless n/a n/a ❑ New WATER HEATING SYSTEMS S stem Name Qty. Type Distribution Rated Input Btuh Tank Cap. al Energy Factor or RE Standby Loss or Pilot Ext. Tank Insul. R- Value Status Instantaneous Electric 1 Instant Elec No Pipe Insulation 7,850 0 0.99 n/a n/a New MULTI-FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control Hot Water Piping Length ft C 0 m Q c 'E I �,; `f S stem Name ,,, _ Qt .FHP Plenum Outside Buried (P,ipe ,C6 th . �. PCpe� Diameter �InsuI , c ❑ i UUILOI'4u6L0AFE1 Y1TOFTF ❑ ! �� ❑ u -7 �v a.r� Y V V I ❑ +1 1 I DATE _ _ EnergyPro 5.1 by EnergySoft User Number. 2655 RunCode: 2014-04-07711:56:34 LID: Pa e 7 of 11 MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R Project Name Casita Date 4/7/2014 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF - 1 R -ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R Form with plans. Building Envelope Measures: 116 (a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain Coefficient SHGC and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form. §118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(1) when the 'installation of a Cool Roof is specified on the CF -1 R Form. *§1 50 a : Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor. §150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value. *§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent U -factor. *§150(d): Minimum R-13 insulation in raised wood -frame floor orequivalent LI -factor. 150(f): Air retarding wrap is tested labeled and installed according to ASTM E1677-95(2000) when specified on the CF -1 R Form. 150 : Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 a 1A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5. §115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. 150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA. 150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c). §1500)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §150(j)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. §1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of recirculating sections of hot water pipes are insulated per Standards Table 150-13. §150(j)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. §1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table 123-A. r - -" -- —^ §150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture 'e ui ent maintJnAA6, and wind. FA §1500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardanVar igeactlosed entirely�in�T, conditioned space. §150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and .Certif ca io qor oration. I 1 FOR CONSIIr-Vi SON e EnergyPro 5.1 by EnergySoft User Number: 2655 Run Code: 2014-04-07711:56:34,. L.TF ID: RY Page 8 of 11 MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date Casita 4/7/2014 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tae is used in combination with mastic and draw bands. 150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. §150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. 150 m 10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and Spa Heating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating ora pilot light. §114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. 150 : Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150 Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2. §150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. 150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable re uirements of §150(k). 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. §150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power,per linear foot of illuminated cabinet. n c- W LA 1i . . J V & SA PT 1JPRC .,�-i CONSTr,. EnergyPro 5.1 by EnergySoft User Number: 2655 Run Code: 2014-04-07T11:56:34 /D: Page 9 of 11 BY -� MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R Project Name Date Casita 4/7/2014 §150(k)l0: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a manual -on occupancy sensor. §150(k)l1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual - on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site is not required to comply with §150 k 11. §150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptionl to §150(k)13 may be controlled by a temporary override switch which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not be high efficacy luminaires. §150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no more than five watts of power as determined according to §130(d). §150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130, 131, 134, and 146. §150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119. CITY C. . ITA EUILDIM DEPT. API _.D FORCE, ,BION DATE— EnergyPro 5.1 by EnergySoR User Number: 2655 RunCode: 2014-04-07711:56:34 Page 10 of 11- HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Casita Date 4/7/2014 System Name Casita Floor Area 452 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 145 Return Vented Lighting Return Air Ducts Return Fan Ventilation F 0 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per System 15,000 8,794 1,038 143 7,134 Total Output Btuh 15,000 0 Output Btuh/s ft 33.2 0 0 Cooling System 0 0 Output per System 25,000 0 0 0 0 Total Output Btuh 25,000 0 1,038 0 Total Output Tons 2.1 1 0 0 Total Output Btuh/s ft 55.3 Total Output s ft/Ton 217.0 1 8,794 7,134 Air System CFM per System 300 HVAC EQUIPMENT SELECTION Airflow cfm 300 FujitsuASU12RLS(1) 18,241 0 15,000 Airflow cfm/s ft 0.66 Airflow cfm/Ton 144.0 Outside Air % 0.0% Total Adjusted System Output 1 18,241 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 0 15,000 Aug 3R Jan 1 AM Outside Air cfm/s ft 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 70 OF Outside Air 0 cfm Supply Fan 300 cfm 70 OF 70 OF 117 OF Heating Coil 117 OF - ROOM 70 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 78!52°F Outside Air 0 cfm 78/52°F 78/52°F 21/19°F o � Supply Fan Cooling Coil 21 / 19 OF 300 cfm 12.1 Bio ROOM 78/52°F EnergyPro5.1 by EnergySoft User Number: 2655 Run Code: 2014-04-07711:56:34 /D: Page 11 of 11 Tankless Electric Water Heaters with Modulating Power Control from Rheem 10 -Year Limited Heat Exchanger Warranty —Year Limited Parts Warranty See Residential Warranty Certificate for complete information. • Compact design - fits almost anywhere • Continuous hot water on demand • Industry leading low -flow activation External temperature control • LED's indicate active element and standby mode • 1/2 -Inch water connections • Rugged brass/copper heat exchanger Applications RECEIVED DEC 2 7 2013 CITY OF LA QUINTA COMMUNITY DEVELOPMENT See reverse for specifications. RTE 3 RTE 7 RTE 18, RTE 27 Tankless water h Continuous I �q y r• �j ce �7" a. - Submittal Data: 12RLFW �, , , �A . �. ASU12RLF & AOU12RLFW wq,4-t- RUNJITSU Job Name: Location: Purchaser: Engineer: Submitted To: For: ❑ Reference ❑ Approval ❑ Construction Submitted By: Unit Designation: Schedule No. Model No.: Capacities: Cooling 12,000 BTU/h OUTLINE AND DIMENSIONS Outdoor Design Temp. Fb DB*B 95/75 Heating 16,000 BTU/h Outdoor Design Temperature Fb DBI" 47/43 HSPF 11.0 SEER 22.0 to EER Cooling/Heating 12.5/12.5 Voltage/Frequency/Phase 208-230/60/1 Indoor Unit: • Auto Restart/ Reset Noise Level Cooling db (A) - HIM/UQ 40/36/30/25 Noise Level Heating db (A)-H/M/UQ 40/36/31/25 Weight 18 lbs. Outdoor Unit: _.. . 31 11-7/16 Noise Level Cooling/Heating 49/49 Recommended Fuse Size 15A Min. Ampacity. 5.9A Running Current Cooling 6.5A Running Current Heating 9.OA Weight 71 lbs. xerrigerant raping: Max Ht. Difference 49 ft. Max Total or Combined Length 66 ft. Discharge Vapor Line (O.D.) 1/4 in. Suction (O.D.) 3/8 in. • Seven year compressor warranty • ENERGY STAR® Qualified • Five year parts warranty • Built in Low Ambient to 14'F • Digital wireless remote control • Auto Restart/ Reset •, Auto Louver: Up/Down • 24 hour timer Notes: • Optional Wired Remote Control • Dry mode .�—eramM,+iv4i QUI! aA LA Quiet M *d BUILDING & SAFETY DEPT, BY ELECTRIC TANKLESS SERIES Specifications DIMENSIONS (inches / pounds) r:. • MODEL- , .,. r LENGTH'- WEIGHT- fiTE 3"-'-' `10:1/4' -... 5 -. . RTE 7 -10-1/4 5-3/8 -6' RTE 9 10 7-1/4 .. _ 8 RTE 13 10 7-1/4 8 RTE 18 10-1/2 11-1/4 1 12. RTE 27 10-1/2 11-1/4 12 • Plumbing connections: 1/2 NPT • Minimum flow rate: 1/2 gal. min. ELECTRICAL SPECIFICATIONS ..._ •_„ "REQ:`_ '`MAX POWER "NIOUEL *""`� KIIO''` `"'"VOLTS , 8RFAKER --(AMP)'"` `AWG"<. "WIRE FITE3 • 3:2 110 - 30. 29 .• 10 RTE 7 7 240 `30 29 10 RTE 9 9 240 40 38 8 RTE 13 13 240 60 54 6 RTE 18 18 240 (2) 40 75 -(2)8 RTE 27 27 240 (2) 60 112 (2) 6 APPLICATION FLOW RATE IN GPM AT 60 PSI TYpical_Shower,", , ; ti, 1.5 to2.0 GPM Max. 2 5yGPM.., Typical Bath Tub Faucet " 2.0 to 3.0 GPM Bathroom Vanity Sink faucet 0.5 to 1.5 GPM Kitchen Sink Faucet 1.0 o 2.2 GPM Washer 1.5 to 3.0 GPM TEMPERATURE RISE AND GPM FLOW MINIMUM ; yMAX 1= f ACTIVATION FLOW: MODEL- .FLOW RATE. E RATE': NUMBER (GPM) (GPM) • ` • : .. + :TEMPERATURE RISE CHART (F°)' `AND FLOW RATES BY MODEL 20° : .; 30° 4ir - -50* ...60° ::70° 80°- • 90°- :1W°, RTE 3 0.4 1.5 1.09 0.73 0.55 0.44 RTE 7 0.4 2.5 2.50 1.59 1.20 , 0.96 0.80 0.68 0.60 0.53 0.48 . RTE 9 0.4 3 3.00 2.05 1.54 1.23 1.02 0.88 0.77 0.68 0.61 RTE 13 0.4 4 4.00 2.96 2.22 1.78 1.48 1.27 1.11 0.99 0.89 RTE 18 0.4 5 5.00 4.10 3.07 2.46 2.05 1.76 1.54 1.37 1.23 RTE 27 0.4 5 5.00 5.00 4.61 3.69 3.07 2.63 2.31 1 2.05 1 1.84 In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. Rheem Water Heating and Heating & Cooling Products 101 Bell Road -Montgomery, AL 36117-4305 1-866-720-2076 • www.rheemtankless.com Rheem Canada Ltd./Ltde • Water Heater Division 125 Edgeware Road, Unit 1, Brampton, Ontario L6Y OPS Printed in USJL 02/11 WP Forth No. TK -205 Rev. 3