06-2659 (RC)P.O. BOX 1504
78-495 CALLE TAMPICO
LA- QUINTA, CALIFORNIA 92253
Appljcai j_0TNumber.-06-0000-26-5-9,
Property AddFess:
79255`HIGHWAA11 STE 3
APN:
649-030-999-8 -30420 -
Application description:
REMODEL - COMMERCIAL
Property Zoning:
REGIONAL COMMERCIAL
Application valuation:
30000
Applicant:
T4ht aF 4 R"
Architect or Engineer:
07
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
LI ENSED CONTRACTOR'S DE RATION
I hereby affirm under penalty of perjury that am licensed under provisi s of apter 9 (commencing with
Section 7000) of Division.3 of the BusinessAnd Professionals Code, a my Li nse is in full force and effect.'
License -Oasis: A r _ //II License 76,7799
OWNER -BUILDER DECLARATION'
I hereby affirm under penalty of perjury that I!am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: -
(_ I I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
( ) I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued ISec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERMIT
Owner:
STAMKO DEV CO
C/O PROVIDENT FINANCIAL MGM'
10345 W OLYMPIC BLVD 2 FL
LOS ANGELES, CA 90064
Contractor:
STAMKO DEVELOPMENT CO L P
6080 CENTER DR, #668
LOS ANGELES, CA 90045
(310)242-5637
Lic. No.: 762799
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 9/18/06
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and A, y number are:
Carrier STATE FUND Policy Number 1557 -2006
_ I certify that, in the pelfornte of the work for which th' perms is issued, I shall not employ any
person in any maas to become subject to th Orkes'ompensation laws of California,
and agree that, if becomes ct to the rkers' co ensationprovisions of Section
X3700 of the LaboI shall f ith comp) with rhos rovisions.
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of su permit, or cessation of work f 0 days will subject
permit to cancellation.
I certify that I have read this application and state that t above information is corre I ogre to comply with all
city and county ordinances and state laws relating to bu' ing construct and her y autho ze representatives
94hjsFQyn)j�10 �rtter upon the above-mentioned prop y for inspe n purpose
Application Number . . . . . 06-00002659
Permit
. . .
BUILDING PERMIT
Additional
desc .
Permit Fee
. . . .
284.50 Plan Check Fee
184.93
Issue Date
Valuation .. . . .
30000
Expiration
Date
3/17/07
Qty Unit Charge
Per
Extension
BASE FEE
252.00
5.00
--------------------------------------------------------------=-------------
6.5000
THOU BLDG 25,001-50,000
32.50
Permit
. .
ELECT - ADD/ALT/REM .
Additional
desc .
Permit Fee
. . . .
30.75 Plan' Check Fee. • .
7.69
Issue Date
. . . .
Valuation . . . .
0
Expiration
Date
3/17/07
Qty Unit Charge
Per
Extension
BASE FEE
15.00
35.00
----------------------------------------------------------------------------
.4500
EA ELEC DEVICE/FIXTURE >20
15.75
Permit
. . . MECHANICAL
Additional
desc .
Permit Fee
57.50 Plan Check Fee
14.38
Issue Date
Valuation -
0
Expiration
Date
3/17/07
Qty Unit Charge
Per
Extension
BASE FEE
15.00
2.00
9.0000
EA MECH FURNACE <=100K
18.00
2.00
9.0000
EA MECH B/C <=3HP/100K BTU
18.00
1.00
----------------------------------------------------------------------------
6.5000
EA MECH VENT FAN
6.50
Permit
. .
PLUMBING
.Additional
desc
"
Permit Fee
. . . .
58.50 Plan Check Fee
14.63
Issue Date
Valuation . . . .
0
Expiration
Date..
3/17/07
Qty Unit Charge.
Per
Extension
BASE FEE
15:00
3.00
6.0000
EA PLB FIXTURE
18.00
1.00
7:5000
EA PLB WATER HEATER/VENT
7.50
1.00
3.0000
EA PLB WATER INST/ALT/REP
3.00
1.00
15.0000
EA PLB GAS METER
15.00
LQPEn11T -
Application Number
. . .
06-00002659
----------------------------------------------------------------------------
Special Notes and
Comments
ten. improvement suite
#3 1494
sq. ft.
----------------------------------------------------------------------------
Other Fees . . .
. . . . . .
STRONG MOTION
(SMI) - COM
6.30
Fee summary
-----------------
Charged
----------
•Paid
--------------------
Credited
----------
Due
Permit Fee Total
431.25
.00
.00
431.25
Plan Check Total
221.63
.00
.00
221.63
Other Fee Total
6.30
.00
.00
6.30
Grand Total
659.18
1.00
.00
659.18
Bin•
�-
City of La Quinta
Building a Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Petmit.#
�-5
Project Address:- -2 �-� j� (;�q �! �) f 5
Owner's Name: -S7
A. P. Number:
Address:
City, ST, Zip: )I.Ysi C,1 G12Z� 3
Telephone:(7C-f�')'777 7(Qe6
Project Description:
Legal Description:
Contractor:
Address:
City, ST, Zip:
Telephone:
City Lie. #:
State Lie. # :
Arch., Engr.,'Designer:
Address: 46— I'is P�iSVc 1�fG4 • g? /�
City, ST, Zip: Pt..r
l/' T��"U i✓ Co.✓%Yb9e %ate , v
Telephone `7&0 CJ j rj
State Lie. #:
Name of Contact Person: Br-V�
Construction Type: Occupancy:
Project type (circle one): New Add'n Alter Repair Demo
Sq. Ft.:
#Stories:
#Units:
.Telephone # of Contact Person:(7&b),51?-' j
Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS UNE
#
Submittal
Req'd
Recd
TRACIMG PERMIT FEES
Plan Sets
Plan Check submitted
Item Amount
Structural Calcs.
Reviewed, re for corrections
Plan Check Deposit
Truss Calcs.
Called Conta Person
Plan Check Balance
Energy Calcs.
Plans picked up
Construction
Flood plain plan .
Plans resubmitted
Mechanical
Grading, plan
2°" Review, ready for correctio s/issue
Electrical
Subcontactor. List
Called Contact Person
gl
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval '
Plans resubmitted
A ( �� 6d;0
IN I[OUSE:-
''" Review, ready for correeti ns/issueevelOPA&
Fee
Planning Approval
Called Contact Person
Pub. Wks. Appr
Date of permit issue
School Fees
•
7
7-7
otal Permi
RIVERSIDE COUNTY FIRE DEPARTMENT
In cooperation with the
California Department of Forestry and Fire Protection
210 Wed San Jacinto Avenue . errs, Caffomia 9MO . ax
_(§q 94G45910
Tom O'Keefe July 17,2W6
Fire Chief
"dlservinghe
Gabriel Lujan & Associates
UnincorporaArm of Riverside
45175 Panorama Drive, Suite A
County and the
Palm Desert, CA 92260
Cities of:
Banning
RE: TENANT IMPROVEMENT PLAN CHECK
Beaumont
LAQ-WTI-051/ Contours Express at 79255 Hwy 111, Ste 3 La Quints, CA
00
calimesa
You have been issued a release for a tenant improvement on an existing building. THIS IS
NOT AN OCCUPANCY PERMIT.
Canyon Lake
00
Coachella
It is prohibited to use/process or store any materials in this occupancy that would classify it
%%
as an "H" occupancy per Sec. 307 of the 2000 UBC.
Desert Hot Springs
.C'
Indian Wells
THE FOLLOWING CONDITIONS MUST BE MET PRIOR TO INSPECTION:
6•
Indio
Install door hardware and exit signs as per Chapter 10 of the 2000 UBC.
c•
Lake Elsinore
°
Install Knox Lock Boxes, Models 4400, 3200 or 1300, mounted per recommended standard
La Quinta
of the Knox Company. Plans must be submitted to the Fire Department for approval of
`.
mounting location/position and operating standards. Special forms are available from this
Moreno Valley
office for the ordering of the Key Lock Boxes. This form must be authorized and signed by
this office for the correctly coded system to be purchased. If the building/facility is protected
Palm Desert
with a fire alarm system or burglar alarm system, the lock boxes will require "tamper"
Penis
monitoring.
s•
Rancho Merge
A minimum 2A10BC Fire Extinguisher, (State Fire Marshal Approved) must be mounted in a
%%
visible location within 75' walking distance from any point in your building or suite. Fire
�Jo
extinguishers can be installed by a licensed extinguisher company with a State Fire Marshal
Temecula
service tag attached to the extinguisher, or purchased from a retail store with a sales receipt
attached. A licensed fire extinguisher company must service extinguisher yearly.
Board of supervisors
ELECTRICAL PANEL BOX:
Bob arm
All breakers must be labeled and a clearance of 36 inches must be maintained around the
District 1
panel at all times.
John Tavagiione,
District2
OTHER REQUIREMENTS:
Am Venable,
District 3
Approved buildingaddress shall be laced in such a position a to be lain) visible and
y
legible from the street Said numbers shall contrast with their background.
Roy Wilson,
District a
A durable sign stating 'This door to remain unlocked during business hours" shall be placed
Marion Ashley,
on or adjacent to the front exit door. The sign shall be in letters not less than one inch high
District s
on a contrasting background.
Applicant/installer shall be responsible to contact the Fire Department to schedule
inspections. A re-inspect&iAW�g 69pA&4&IWN&W pA&4gFiaLspection is necessary.
82-675 Highway 111, a fl., Lxdlo, ca 92201 • (760) 363-9686 • Fax (760) 863-7072
Requests for inspections are to be made at least 72 hours in advance and may be arranged
by calling (760) 863-8886.
All questions regarding the meaning of these conditions should be referred to the Fire
Department Planning & Engineering Staff at (760) 863-8886.
Sincerely,
Tracy Hobday
Chief Fire Department Planner
•
By:
Sonia Cooley
Fire Safety Specialist
0
f ccupancyCertifica'to o O
i
I\C06pA1TID '
i F
�t4
oF9 -Building �& Safety Department
g
This Certificate is issued pursuant to the requirements of Section 109 of the California Building
Code, certifying that, at the time of issuance, this structure was in compliance with.. the
provisions of the -Building Code and the various ordinances of the City regulating building
t
construction and/or use.
y
g
0 V
BUILDING ADDRESS: 79-255 HIGHWAY 111 #3
Use classification: COMMERICAL (CONTOURS EXPRESS) Building Permit No.: 06-2659
Occupancy Group: B Type of Construction: VN Land UseZone: CR
Owner of Building: STAMKO DEV CO. Address: 10345 W OLYMPIC BLVD 21FIL
City, ST, ZIP: LOS ANGELES, CA 90064
By: STEVE TRAXEL
Dater 01-11-2007
Building Official
`'
POST IN A CONSPICUOUS PLACE
E 24 EPORT
S%O Iit Wa 3
Title 24 Report for:• w 1
Stamko Development T.I.
79-255 Highway 111, Suite 3
La Quinta, Ca 92253
Project Designer:
Gabriel Lujan and Associates
45-175 Panorama Dr., Suite A
Palm Desert, Ca 92260
(760) 568-8545
Report Prepared By:
Tim Scott
Scott Design & Title 24
77085 Michigan Dr.
Palm Desert, CA 92211
(760) 200-4780
FCITY OF LA OETUirIoT�A
BUILDING &
APPROVED
FOR CON UCTION
DAT
1
Job Number:
;. q'%%
Date:
7/9/2006
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This p ra approval and is
l uthorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Eff y Standards.
I.* PThis program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.1 by EnergySoft Job Number: User Number: 6712
PERFORMANCE CERTIFICATE OF COMPLIANCE Part 1 Of 3 PERF -1
PROJECT NAME
This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the
DATE
Stamko Development T.I.
DOCUMENTATION AUTHOR
7/9/2006
PROJECT ADDRESS
Tim Scott
BUILDING CONDITIONED FLOOR AREA
79-255 Highway 111, Suite 3 La Quinta
The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents i
CLIMATE ZONE
15
PRINCIPAL DESIGNER - ENVELOPE
TELEPHONE
Building. Permit #.
Gabriel Lujan and Associates
(760) 568-8545
®
DOCUMENTATION AUTHOR
TELEPHONE
Checked-by/Date
Scott Design & Title 24
(760) 200-4780
Enforcement Agency Use
GENERAL INFORMATION
This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the
California Code of Regulations. This certificate applies only to a Building using the performance compliance approach.
The documentation preparer hereby certifies that the documentation is acc ate and c plete.
DOCUMENTATION AUTHOR
DATE OF PLANS
Tim Scott
BUILDING CONDITIONED FLOOR AREA
1,494 Sq.Ft,
The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents i
CLIMATE ZONE
15
BUILDING TYPE
®
NONRESIDENTIAL HIGH RISE RESIDENTIAL
HOTEUMOTEL GUEST ROOM
PHASE OF CONSTRUCTION
®
NEW CONSTRUCTION ADDITION
5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed
EXISTING + ADDITION/ALTERATION
STATEMENT OF COMPLIANCE
This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the
California Code of Regulations. This certificate applies only to a Building using the performance compliance approach.
The documentation preparer hereby certifies that the documentation is acc ate and c plete.
DOCUMENTATION AUTHOR
SIGNAT
Tim Scott
FqL
The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents i
consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this
permit application. The proposed building as designed meets the energy efficiency requirements contained in sections 110, 116,
through 118, and 140, 142, 143 or 149 of Title 24, Part 6.
ENV. LTG. MECH.
❑ r-] F] 1. 1 hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to
sign this document as the person responsible for its preparation; and that I am licensed in the State of
California as a civil engineer, mechanical engineer, or I am a licensed architect.
❑ ❑ ❑ 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section
5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed
contractor performing this work.
3. 1 affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document
because it pertains to a structure or type of work described as exempt pursuant to Business and Professions
Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in
full in the Nonresidential Manual.)
ENVELOPE COMPLIANCE
Indicate location on plans of Note Block for Mandatory Meas �'N�• ?�
Requir Forms EN -1
PRINCIPAL ENVELOPE DESIGNER - NAME
SIGN TU
LIC. NO.
DATE
Gabriel Ewan and Associates
rA. cscy
LIGHTING COMPLIANCE
Indicate location on plans of Note Block for Mandatory Measures
jry1 • Z
TG -1, LTG -2
Re red Forms
PRINCIPAL LIGHTING DESIGNER - NAME
GNATU .
LIC. NO.
DATE
Gabriel Wan and Associates
MECHANICAL COMPLIANCE
Indicate location on plans of Note Block for Mandatory Measure
• L
ECH-1 MECH-2 MECH-3 MECH-5
Require Forms
PRINCIPAL MECHANICAL DESIGNER - NAMESIG
RE
LIC. NO.
DAT
Scott Design & Title 24
Q 10&
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Pane:3 of 24 1
PERFORMANCE CERTIFICATE OF COMPLIANCE Part 2 of 3 PERF1
PROJECT NAME DATE
Stamko Develo ment T. 1. 7/9/2006
Building Orientation
Number of Stories
Number of Systems
Number of. Zones.
N 0 deg
ANNUAL TDV ENERGY USE SUMMARY kBtu/s ft- r
1,494
Standard Proposed
ENERGYCOMPONENT Design Design
Space Heating 0.37 0.70
Space Cooling 468.14 380.03
Indoor Fans 103.23 100.39'
Heat Rejection 0.00 0.00
Pumps & Misc. 0 00`0 00
Domestic Hot Water 57.23 57.73
Lighting,,.165.26 123.40
Receptacle82.18 82.18
Process 0.09 Lo'oo
_ ,TOTALS.- • 876.4l.. ` 744.43
Percent better'than Standard: 15.1%
Compliance
Margin
.
.
( S.tandard MYp7r.o"oows.ewdlMMMMMM
0.33
�r �
R,
r
3 .
0 40 80 1200 ZODi240 280 320 360 400 440
-K kBtulsgft yr' dw
process)
88.11
2.83�"°
0.00
0.00
-0.49.r
41.87
0.00
o.00
131.98
( 15.1% excluding
0.0%
BUILDING COMPLIES
175
GENERAL INFORMATION
Building Orientation
Number of Stories
Number of Systems
Number of. Zones.
N 0 deg
:Conditioned Floor Area
Unconditioned Floor Area
Conditioned Footprint Area
FuelType
1,494
sqft.
sqft.
sqft.
-
1
0
2
1,494
1
Natural Gas
175
.56.1%
TI
Orientation .:
Front. Elevation N
Left'Elevation (E)
Rear Elevation. S
Right Elevation W. ',
Total
ROOF
Gross Area
sqft.
sqft.
sqft.
sqft.
sqft.
sqft.
Glazing Area
Glazing
sqft.
sqft.
sqft.
sgft.
sqft.
Ratio
312
175
.56.1%
624
0
0.0%
312
0
0.0%
624
0sgft..
0.0%
1,872
175
1,494
0.0%
Standard .; Proposed
Lighting Power Density- 1.500 wisgn: 1.120 wisgft. .
Prescriptive Env: Heat Loss - 329 Btu/h 346 Blum
Prescriptive Env. Heat Gain 30,006 Btu/h-F. 31,764 Btum-F
Remarks: <
Run Initiation .Time: 07/09/06 12:40:16 Run Code: 1152474016
EnergyPro 4.1' by EriergySoft User Number: 6712 Job Number: Page:4 of 24
PERFORMANCE CERTIFICATE OF COMPLIANCE Part 3 of 3 PERF -1
PROJECT NAME
Stamko Development T. I.
DATE
7/9/2006
ZONE INFORMATION
System Name Zone Name Occupancy Type
Floor
Area
(sgft.)
Inst. Ctrl. Allowed LPD
LPD Credits Area Tailored
(Wlsf)1 ;(W/sf)2 (W/S3 W/s 4
Proc.
Loads '
(W/Sq
HVAC -1 & 2 Suite 3 Comp Bldg Retail and Wholesale
1,494
1.12 -
Notes: 1. See LTG -2-C 2. See LTG -4-C 3. See LTG -5-C 4. See LTG -6-C Items above require special' documentation
(items marked with asterisk, see LTG -2 -C by others) (by others)
EXCEPTIONAL CONDITIONS COMPLIANCE CHECKLIST
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification
and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of
the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation
submitted.
The HVAC System "Carrier 50JX0425' is designated as 3 Phase, or is Exempted from the NAECA 13 SEER requirement.
The exceptional features listed in this performance approach application have specifically been reviewed. Adequate written justification and
documentation for their use have been provided by the applicant.
Authorized Sionature or Stamo
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:5 of 24 I
F,
L -
CERTIFICATE OF COMPLIANCE ENV -1-C
ROJECT NAME DATE
Stamko Development T. 1. 7/9/2006
OPAQUE SURFACES
#
Surface
Type
Area
U -Fac.
Insulation
Cay. Cont.
Act.
Am.
Tilt
Cond.
Status
Joint Appendix
IV Reference
Location / Comments
1
Roof
1,494
0.034
R-30
R-0.0
0
0
New
02-A26
Suite 3
2
Wall
137
0.074
R-19
R-0.0
0
90
New
09-A5
Suite 3
3
Wall
624
0.110
R-11
R-0.0
90
90
New
09-A2
Suite 3
4
Wall
291
0.074
R-19
R-0.0
180
90
New
09-A5
Suite 3
5
Door
21
0.700
None
R-0.0
180
90
New
28-A2
Suite 3
6
Wall
624
0.110
R-11
R-0.0
270
90
New
09-A2
Suite 3
N, E, A, R (New, Exist ng, Altered, Removed)
FENESTRATION SURFACES
I ]Standards
than or equal to 10,000 sq.ft, of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default LI -factors from
Standards Table 116-A and B. Certificate shall be filed in the contractor's oroiect office dudno construction and in the building manaoers offira after r—m-rtinn
#
TvDe
Window Overhang Left Fin Right Fin
## Exterior Shade Type SHGC Hgt. Wd. Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t.
Area U -Fac'
SHGC2
Act.
Azm.
Cond.
Stat.
Glazing Type
Location/
Comments
1
Window
Front
N
30 0.720 NFRC
0.59 NFRC
.0
New
Double Metal Tint
Suite 3
2
Window
Front
N
60 0.720 NFRC
0.59 NFRC
0
New
Double Metal Tint
Suite 3
3
Window
Front
N
30 0.720 NFRC
0.59 NFRC
0
New
Double Metal Tint
Suite 3
4
lWindow
Front
N
30 0.720INFRCi
0.59 NFRC
0
New
Double Metal Tint
Suite 3
5
Window
Front
N
25 0.720 NFRC
0.59 NFRC
0
New
Double Metal Tint
Suite 3
1 D -tactor type: 116-A Detault Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value.
2 SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value
'W'L]The proposed bullding contains an enclosed space with floor area greater than 25,000 sq.ft, a calling height greater than 15 feet and a LPD for general lighting of at least 0.5 Wlsq.ft. If this
box Is checked, ENV -4-C must be filled out when submitting under the Prescriptive Compliance Approach.
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:6 of 24 1
EXTERIOR SHADING
Window Overhang Left Fin Right Fin
## Exterior Shade Type SHGC Hgt. Wd. Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t.
1 None 0.76
2 None 0.76
3 None 0.76
4 None 0.76
5 1 None 0.76
INIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES
'W'L]The proposed bullding contains an enclosed space with floor area greater than 25,000 sq.ft, a calling height greater than 15 feet and a LPD for general lighting of at least 0.5 Wlsq.ft. If this
box Is checked, ENV -4-C must be filled out when submitting under the Prescriptive Compliance Approach.
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:6 of 24 1
CERTIFICATE OF COMPLIANCE (Part 1 of 3) LTG -1 -C
PROJECT NAME DATE
Stamko Development T. I. 7/9/2006
INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES
INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0
LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG4-C) 0
UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0
ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES
❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED
❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS
❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 1,674
❑X PERFORMANCE METHOD
❑ COMMMON LIGHTING SYSTEM (From LTG -8-C)
ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C o
MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS
CONTROL LOCATION
(Room #)
CONTROL
IDENTIFICATION
CONTROLTYPE
(Auto Time Switch, Dimming, etc.)
Check if
SPACE CONTROLLED Daylighting
NOTE TO
`FIELD
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:7 of 24 1
INSTALLED
WATTS
INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C)
1,674
PORTABLE LIGHTING (From LTG -3-C)
0
LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C)
0
CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER
1,674
INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0
LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG4-C) 0
UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0
ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES
❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED
❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS
❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 1,674
❑X PERFORMANCE METHOD
❑ COMMMON LIGHTING SYSTEM (From LTG -8-C)
ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C o
MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS
CONTROL LOCATION
(Room #)
CONTROL
IDENTIFICATION
CONTROLTYPE
(Auto Time Switch, Dimming, etc.)
Check if
SPACE CONTROLLED Daylighting
NOTE TO
`FIELD
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:7 of 24 1
4
CERTIFICATE OF COMPLIANCE (Part 3 of 3) LTG -1 -C
PROJECT NAME
Stamko Development T.I.
DATE
7/9/2006
Designer:
This form is to be used by the designer and attached to the plans. Listed below are all the acceptance
tests for lighting systems. The designer is required to check the boxes by all acceptance tests that
apply and list all equipment that require an acceptance test. If all equipment of a certain type requires
a test, list the equipment description and the number of systems to be tested in parentheses. The NJ
number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the
test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design
professional or an agent selected by the owner). Since this form will be part of the plans, completion
of this section will'allow the responsible party to budget for the scope of work appropriately.
Building Departments:
Before an occupancy permit is granted for a newly constructed building or space, or a new lighting
system system serving a building or space is operated for normal use, all control devices serving the
building or space shall be certified as meeting the Acceptance Requirements for Code Compliance.
In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building department
that:
A. Certifies plans, specifications, installation certificates, and operating and maintenance
information meet the requirements of§ 10-103(b) and Title 24 Part 6.
Test Description
Test Performed By:
❑ LTG -2-A: Lighting Control Acceptance Document
- Occupancy Sensor Acceptance
- Manual Daylight Controls Acceptance
- Automatic Time Switch Control Acceptance
Equipment requiring acceptance testing
❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document
Equipment requiring acceptance testing
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:8 of 24 1
Is
CERTIFICATE OF COMPLIANCE MECH-1-C
PROJECT NAMEDATE
Stamko Development T.I. 7/9/2006
uesigner:
This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to
check the boxes by all acceptance tests that apply and list all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the
equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential
ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent
selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work
appropriately.
Building Departments:
SYSTEM ACCEPTANCE. Before an occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a
building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for
Code Compliance.
In addition a Certificate of Acceptance, MECH-I-A Form shall be submitted to the building department that certifies plans, specifications, installation
certificates, and operating and maintenance information meet the requirements of Section 10-103(b) and Title 24 Part 6.
STATEMENT OF COMPLIANCE
❑ MECH-2-A: Ventilation System Acceptance Document '
-Variable Air Volume Systems Outdoor Air Acceptance l
-Constant Air Volume Systems Outdoor Air Acceptance
Equipment requiring acceptance testing
Test required on all New systems both New Construction and Retrofit.
❑ MECH-3-A: Packaged HVAC Systems Acceptance Document
Equipment requiring acceptance testing
Test required on all New systems both New Construction and Retrofit.
MECH-4-A: Air -Side Economizer Acceptance Document
Equipment requiring acceptance testing
Test required on all New systems both New Construction and Retrofit. Units with economizers that are installed at the factory and certified with the
commission do not require equipment testing but do require construction inspection.
❑ MECH-5-A: Air Distribution Acceptance Document
Equipment requiring acceptance testing
This test required If the unit serves 5,000 fit of space or less and 25% or more of the ducts are in nonconditioned or semiconditioned space like an
attic. New systems that meet the above requirements. Retrofit systems that meet the above requirements and either extend ducts, replace ducts or
replace the packaged unit.
❑ MECH-6-A: Demand Control Ventilation Acceptance Document
Equipment requiring acceptance testing
All new DCV controls installed on new or existing packaged systems must be tested.
❑ MECH-7-A: Supply Fan Variable Flow Control Acceptance Document
Equipment requiring acceptance testing
All new VA fan volume controls installed on new or existing systems must be tested
❑ MECH-8-A: -Hydronic System Control Acceptance Document
-Variable Flow Controls Applies to chilled and hot water systems.
-Automatic Isolation Controls Applies to new boilers and chillers and the primary pumps are connected to a common header.
-Supply Water Temperature Reset Controls
Applies to new constant flow chilled and hot water systems that have a design capacity greater than or equal to 500,000 Blulhr.
-Water-loop Heat Pump Controls
Applies to all new watedoop heat pump systems where the combined loop pumps are greater than 5 hp.
Variable Frequency Controls Applies to all new distribution pumps on new variable flow chilled, hydronic heat pump
or condenser water systems where the pumps motors are greater than 5 hp.
Equipment requiring acceptance testing
EnergyPro 4.1 by EnergySoft User Number: 6712 , Job Number: Page:9 of 24
U
N
'1
V
J
N
4--
0
r
(u
CL
W
J
D
LU
TO
2
U
0
`Z
r
�2
0
J
0
0
0
1
(O
0
0
N
0)
ti
LU
Q
N
D
W
Z
0
F— z
0
� U
E tr
0
0 U.
> w
N 0
CIL
0 0
Y Z
(n C7
E E
2
A D
M1
f
o
o
CNI
'^
W
♦ti
(0
�ti
/�
(0
N
r
0
o
CD
v
a
F -V)
a
M
Y
W
J
J
-j
Installed
16
C.0
J
CL
E
°
°
m
Q
CD
CD
Wafts
r—
z
O
W
H
(�
V
0
V
N
LO
(9
J0
r
z
J
0'
z
Q
(Gxl)
Q
m
0
v
U
IL
c
..
E
z
z
0
M
M
Number
_
of
a
Luminaires
d
CEC
=
Default?
X
X
C7
O
Wafts
0
per
�
N
Luminaire
r,-
Number of
o
C:�
LL
Ballast per
T--
N
Luminaire
Watts
M
M
W
per
N
Lamp
Number of
N
CIO
0
Lamps per
C
Luminaire
E
R
J
U
Lamp
Type
co
cc
N
M
LL
O
O
V.
L
vW
W
H
co
co
•�
�
d
C
N
C
F
�
N
N
J
>
>
FL
U-
v
v
N
V
N
E
.
W
z
E E
2
A D
M1
f
o
o
'^
W
♦ti
(0
�ti
/�
(0
N
r
0
o
v
a
F -V)
a
M
Y
W
J
J
-j
16
J
CL
E
°
°
m
Q
CD
CD
J
z
O
W
H
(�
V
0
V
N
LO
(9
J0
r
z
J
0'
z
Q
d
Q
m
0
v
U
IL
c
..
E
z
z
0
E E
2
A D
M1
f
AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C
PROJECT NAME
I Stamko Development T.I.
ITEM OR SYSTEM TAG(S)
Number of Systems
T-24
MANDATORY MEASURES Section
Heating Equipment Efficiency
Cooling Equipment Efficiency
Heat Pump Thermostat
Furnace Controls
Natural Ventilation
Minimum Ventilation
VAV Minimum Position Control
Demand Control Ventilation
Time Control
Setback and Setup Control
Outdoor Damper Control
Isolation Zones
Insulation
,Pipe
Duct Insulation
PRESCRIPTIVE MEASURES
Calculated. Heating Capacity x 1.43 2
Proposed Heating Capacity 2
Calculated Sensible Cooling Capacity x 1.212
Proposed Sensible Cooling Capacity 2
Fan Control
DP Sensor Location
Supply Pressure Reset (DDC only)
Simultaneous Heat/Cool
Economizer
Heating Air Supply Reset
Cooling Air Supply Reset
Duct Sealing for Prescriptive Compliance
DATE
7/9/2006
AIR SYSTEMS, Central or Single Zone
HVAC -1 & 2
2
Reference on Plans or Specification 1
112(a)
7.20 HSPF
112(a)
12.0 SEER / 10.5 EER
112(b)
Yes
112(c), 115(a
n/a
121(b)
Yes
121 b
299 cfm
121 c
No
121(c)
No
121 c 122(e)
Programmable Switch
122(e)
Heating & Cooling Required
122
Auto
122(
n/a
123
124
R-4.2
144 a & b
n/a
144 a & b
51,215 btuh
144 a & b
n/a
144 a & b
59,512 btuh
144 c
Constant Volume
144 c
144 c
Yes
144 (d).
No
144 a
No Economizer
144
Constant Tem
144(f)
Constant Temp
144 (k)
No
1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the
required features are documented. If a requirement is not applicable, put "N/A" in the column.
2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1.
3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance,
see PERF -1 for performance method duct sealing requirements.
CllN--T`ML-Aid.L7M5 M01WTIMV uIVEla! .-ILIULLau1lJw+Y3w1t1
un Initiation I ime: U7/09/06 12:40:16 Run Code: 1152474016
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 11 of 24
WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2 MECH-2-C
PROJECT NAME
Stamko Development T.I.
DATE
7/9/2006
2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, H dronic Loops
ITEM OR SYSTEM TAG(S)
Number of Systems
T-24
MANDATORY MEASURES Section Reference on Plans or Specification)
Equipment Efficiency . 112(a)
Pipe Insulation 123
PRESCRIPTIVE MEASURES
Calculated Capacity
144 (a & b)
Proposed Capacity
144 (a & b)
Tower Fan Controls
144 h
Tower Flow Controls
144 h
Variable Flow System Design
144 0)
Chiller and Boiler Isolation
144 '
CHW and HHW Reset Controls
144 0)
WLHP Isolation Valves
144 '
VSD on CHW, CW & WLHP Pumps > 5
144 0)
HP
DP Sensor Location
144 '
•1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph
number where the required features are documented. If a requirement is not applicable, put "N/A" in the column.
2: Water side systems include wet side system using other liquids such as glycol or brine.
ITEM OR SYSTEM TAG(S)
Number of Systems
MANDATORY MEASURES
Water Heater Certification
Water Heater Efficiency
Service Water Heating Installation
Pool and Spa Efficiency and Control
Pool and Spa Installation
Pool Heater - No Pilot Light
Spa Heater - No Pilot Light
113 (a)
113 b)
113 (c)
114 a
E
Service Hot Water, Pool Heating
DHW Heater
1
AO SMITH ELJF-10
99%
n/a
n/a
n/a
n/a
Reference on Plans or Specification'
1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and
paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" ins the column.
NOTES TO FIELD - For Building Department Use Only
Run Initiation Time: 07/09/06 12:40:16 Run Code: 1152474016
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 12 of 24
U
M
W
►E,
F
L
I
c
L
F
c
c
L
I
c
0
M
Z
Transfer Air
N
0
Design Min. Ai
-
Setpoint
Max of
T
c
Columns H, J,
n
6
2
K or 300 CFM
6
-
B x 0.4
d
E
' O
F
>
Q
Y
CFM/sq. ft.
m
X
r
7 Q
>
C
12
L
30% of Design
0
Zone Supply
3
CFM
Design
rn
rn
�❑
°
m
—
Vent Air
C-'
`"
N
E
CFM
y
RECD V.AN
N
'
N
E _
=
Max of
M
M
H
m
g E
(D or G)
a g
U)
Min CFM
m
a
E
v�
C,)
by Occupant
L)
E E
z'
m
(E X F)
c
0
c u
V
CFM
`°
a
z
Q `
o
Z
pero
y;
Er
z
IL
Person
U
c
E
=
c
QNumber
of
o
m m
O
w
People
0v
m
o
m m
m
E
Min CFM
N
,m
5
p
by Area
cn
H
m
s
E
N
N
(BXC)
o
o
—'o c
m
.0Q
CFM
N
o
2c
`o
¢ 6
a
m
U
per
o
`o
-d E
,
i;
E
04
w
Suare Foot
n
m g
s
n
Z
`-
_
E
W
o
0
Q
Condition
Dom
L
>=
r
m
Area
U
g
L m
v
(SF)
m
Q>
`5
E
E
Z
`o
Q
O
w
V
Y
y m
O
J
5W
mLL
C
LU
X 2
Q n
Z
F
m
o m
Ti
m E
n m
c
W
U)
°
m
J
>
Q
D�
w>d
m
E
m o
n
.'•E
E v
d
17
Q
Z
c
a
c
m
c E
E
.� y
Q
U°
N
N
H
c-
_
O E
y
a
Z
o$
m
K 2
O
U M
~
m
Q
�
d
C
T
i
M
U
W
U
a)
2
z
�p
=
MECHANICAL EQUIPMENT DETAILS
Part 1 of 2 MECH7
PROJECT NAME
Stamko Development T. I.
DATE 7/9/2006
HILLER AND TOWER SUMMARY
Efficiency
Tons
PUMPS
Equipment Name
Equipment Type
Qty.
Tot.
Qty
GPM
BHP
Motor
Eff.
Drive
Eff.
Pump
Control
1DHW / BOILER SUMMARY
Energy Standby TANK INSUL.
Rated Vol. Condition Factor Loss or Ext.
System Name System Type Distribution Type Qty Input (Gals.) Status or RE Pilot I R -Val.
O SMITH ELJF-10 Small Elec. Point of Use 1 5,120 10 New 0.95 n/a n/a
Hot Water P mp Hot Water Piping Len th ft
Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
CENTRAL SYSTEM RATINGS
HEATING COOLING
Aux. Condition
System Name System Type ft Output kW Eff. Outout Efficlencv Status Economizer Type
Carrier 50JX0425 Packaged DX 2 41,000 O.0 7.20 HSPF 41,500 12.0 SEER / 10.5 EER New No Economizer
4
ENVELOPE MANDATORY MEASURES ENV -MM
ROJECT NAME DATE
Stamko Development T.I. 1 7/9/2006
DESCRIPTION
Designer
Enforcement
❑
§ 118(a)
Installed Insulating Material shall have been certified by the manufacturer to comply
with the California Quality Standards for insulating material, Title 20, Chapter 4, Article
3.
X]
§ 118(c)
All Insulating Materials shall be installed in compliance with the flame spread rating
and smoke density requirements of Sections 2602 and 707 of Title 24, Part 2.
0
§ 117(a)
All Exterior Joints and openings in the building that are observable sources of air
leakage shall be caulked, gasketed, weatherstripped or.otherwise sealed.
§ 116(b)
Site Constructed Doors, Windows and Skylights shall be caulked between the unit
and the building, and shall be weatherstripped (except for unframed glass doors and
fire doors).
X❑
§ 116(a)1
Manufactured Doors and Windows Installed shall have air infiltration rates not
exceeding those shown In Table Number 1-E. of the Standards. Manufactured
fenestration products must be labeled for U -value according to NFRC procedures.
X❑
§118(e)
Demising Walls in Nonresidential Buildings:
The opaque portions of framed demising walls in nonresidential buildings shall have
insulation with an installed R -value of no less than R-11;between framing members.
EnergyPro
By EnergySoft ' User Number: User Job Number: Page: 15 of 24
B C D E
Room Room Room Cavity
Task/Activity Length (L) Width (W) Height (H)
Description (ft) ft(ft)
F
Room Cay. Ratio
5xHx(L+W)
/(LxW)
A
B
C
D
E
F
Room
Name
Task/Activity
Description
Room
Area (A)
M
Room
Perimeter (P)
(ft)
Room Cavity
Height (H)
(ft)
Room Cay. Ratio
2.5 x H x P
/A
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 16 of 24
LIGHTING MANDATORY MEASURES LTG -MM
(PROJECT NAME DATE
Stamko Development T.I. I
7/9/2006
DESCRIPTION
Designer
Enforcement
F§131(d)1 For every floor, all interior lighting systems shall be equipped with a separate automatic
control to shut off the lighting. This automatic control shall meet the requirements of
Section 119 and may be an occupancy sensor, automatic time switch, or other device
capable of automatically shutting off the lighting.
FX], §131(d)2Override for Building Lighting Shut-off: The automatic building shut-off system is
provided with a manual, accessible override switch in sight of the lights. The area
of override is not to exceed 5,000 square feet.
X❑ §119(h) Automatic Control Devices Certified: All automatic control devices specified are
certified, all alternate equipment shall be certified and installed as directed by the
manufacturer.
§111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for
the project are certified and listed in the Directory. All installed fixtures shall be
certified.
§132 Tandem Wiring for One and Three Lamp Fluorescent Fixtures: All one and three
lamp fluorescent fixtures are tandem wired with two lamp ballasts where required
by Standards Section 132; or all one and three lamp fluorescent fixtures are
specified with electronic high -frequency ballasts and are exempt from tandem
r wiring requirements.
X] §131(a) Individual Room/Area Controls: Each room and area in this building is equipped
with a separate switch or occupancy sensor device for each area with floor -to -
ceiling walls.
X❑ §131(b) Uniform Reduction for Individual Rooms: All rooms and areas greater than 100
square feet and more than 0.8 watts per square foot of lighting load shall be
controlled with bi-level switching for uniform reduction of lighting within the room.
❑ §131(c) Daylight Area Control: All rooms with windows and skylights that are greater than
250 square feet and that allow for the effective use of daylight in the area shall
have 50% of the lamps in each daylit area controlled by a separate switch; or the
effective use of daylight cannot be accomplished because the windows are
continuously shaded by a building on the adjacent lot. Diagram of shading during
different times of the year is included on plans.
§131(e) Display Lighting. Display lighting shall be separately switched on circuits that
are 20 amps or less.
i
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 17 of 24
1�
MECHANICAL MANDATORY MEASURES Part 1 of 2 MECH-MM
NAME DATE
Stamko Development T. 1. 7/9/2006
DESCRIPTION
Desi ner
Enforcement
Equipment and Systems Efficiencies
X] §11i Any appliance for which there is a California standard established in the
Appliance Efficiency Regulations will comply with the applicable standard.
❑ § 115(a) Fan type central furnaces shall not have a pilot light.
X] § 123 Piping, except that conveying fluids at temperatures between 60 and 105 degrees
Fahrenheit, or within HVAC equipment, shall be insulated in accordance with
Standards Section 123.
§ 124 Air handling duct systems shall be installed and insulated in compliance with
Sections 601, 603 and 604 of the Uniform Mechanical Code.
Controls
§ 122(e) Each space conditioning system shall be installed with one of the following:
X] § 122(e)1A Each space conditioning system serving building types such as offices and
manufacturing facilities (and all others not explicitly exempt from the
requirements of Section 112 (d)) shall be installed with an automatic time switch
with an accessible manual override that allows operation of the system during
off -hours for up to 4 hours. The time switch shall be capable of programming
different schedules for weekdays and weekends and have program backup
capabilities that prevent the loss of the device's program and time setting for at
least 10 hours if power is interrupted; or
F§ 122(e)1 B An occupancy sensor to control the operating period of the system; or
F] § 122(e)1 C A 4 -hour timer that can be manually operated to control the operating period of
the system.
X] § 122(e)2 Each space conditioning system shall be installed with controls that temporarily
restart and temporarily operate the system as required to maintain a setback
heating and/or a setup cooling thermostat setpoint.
§ 122(g) Each space conditioning system serving multiple zones with a combined
conditioned floor area more than 25,000 square feet shall be provided with
isolation zones. Each zone: shall not exceed 25,000 square feet; shall be
provided with isolation devices, such as valves or dampers, that allow the supply
of heating or cooling to be setback or shut off independently of other isolation
areas; and shall be controlled by a time control device as described above.
, ® § 122(a&b) Each space conditioning system shall be controlled by an individual thermostat
that responds to temperature within the zone. Where used to control heating, the
control shall be adjustable down to 55 degrees F or lower. For cooling, the
control shall be adjustable up to 85 degrees F or higher. Where used for both
heating and cooling, the control shall be capable of providing a deadband of at
least 5 degrees F within which the supply of heating and cooling is shut off or
reduced to a minimum.
§ 122(c) Thermostats shall have numeric setpoints in degrees Fahrenheit (F) and
adjustable setpoint stops accessible only to authorized personnel.
§ 112(b) Heat pumps shall be installed with controls to prevent electric resistance
supplementary heater operation when the heating load can be met by the heat
pump alone.
EnergyPro By EnergySoft User Number: User Job Number: Page: 18 of 24
MECHANICAL MANDATORY MEASURES Part 2 of 2 MECH-MM
PROJECT NAME DATE
R Stamko Development T. 1. 1 7/9/2006
Description
Designer
Enforcement
Ventilation
§ 121(,) Controls shall be provided to allow outside air dampers or devices to be operated at
the ventilation rates as specified on these plans.
FX] § 1220 Gravity or automatic dampers interlocked and closed on fan shutdown shall be
provided on the outside air intakes and discharges of all space conditioning and
exhaust systems.
§ 122(f) All gravity ventilating systems shall be provided with automatic or readily accessible
manually operated dampers In all openings to the outside, except for combustion air
openings.
FX § 121(f)l Air Balancing: The system shall be balanced in accordance with the National
Environmental Balancing Bureau (NEBB) Procedural Standards (1983), or
Associated Air Balance Council (AABC) National Standards (1989); or
F§121(f)2 Outside_ Air Certification: The system shall provide the minimum outside air as
shown on the mechanical drawings, and shall be measured and certified by the
Installing licensed C-20 mechanical contractor and certified by (1) the design
- mechanical engineer, (2) the installing licenced C-20 mechanical contractor, or (3) the
person with overall responsibility for the design of the ventilation system; or
X❑ § 121(03 Outside Air Measurement: The system shall be equipped with a calibrated local or
remote device capable of measuring the quantity of outside air on a continuous
basis and displaying that quantity on a readily accessible display divice; or
X] § 121(04 Another method approved by the Commission.
Service Water Heating Systems
❑ § 113(b)2 If a circulating hot water system Is installed, it shall have a control capable of
automatically turning off the circulating pump(s) when hot water is not required.
X❑ § 113(b)3B Lavatories in restrooms of public facilities shall be equipped with controls to limit the
outlet temperature to 110 degrees F.
X] § 113(b)3C Lavatories in restrooms of public facilities shall be equipped with one of the
following:
Outlet devices that limit the flow of hot water to a maximum of 0.5 gallons per
minute.
Foot actuated control valves, and outlet devices that limit the flow of hot water to a
maximum of 0.75 gallons per minute.
Proximity sensor actuated control valves, and outlet devices that limit the flow of hot
water to a maximum of 0.75 gallons per minute.
Self-closing valves, and outlet devices that limit the flow of hot water to a maximum
of 2.5 gallons per minute, and 0.25 gallons/cycle (circulating system).
Self-closing valves, and outlet devices that limit the flow of hot water to a maximum
of 2.5 gallons per minute, and 0.50 gallons/cycle (non -circulating system).
Self-closing valves, and outlet devices that limit the flow of hot water to a maximum
of 2.5 gallons per minute, and 0.75 gallons/cycle (foot switches and proximity sensor
controls).
EnergyPro By EnergySoft User Number: User Job Number: Page: 19 of 24
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Stamko Development T.I. 7/9/2006
YSTEM NAME FLOOR AREA
HVAC -1 & 2 1,494
26.0 of 64.9 of
Outside Air
299 cfm
69.5 of
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
Sensible
Latent
CFM
I Sensible
2,786
43,122
7,287
2,256
27,866
0
2,156
1,393
0
0
299
11,853
3,465
299
13,843
0
0
2,156
1,393
59 288 10 753
HVAC EQUIPMENT SELECTION
Carrier 50JX0425 59,512 15,276
Total Adjusted System Output 59,512 15,276
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Jul 3 pm
irstream Tem
64.9 OF 82.1oF
Supply Fan Heating Coil
2800 cfm
irstream Tem
12.0/77.9OF 78.7/65.8OF 78.7/65.9OF
Outside Air
299 cfm
74.7/64.10F
�% Return Air Ducts 4
44,4961
51,215
51,215
Jan 12 am
Supply Air Ducts
81.6 of
ROOMS
70.0 of
58.7 / 57.7 of
Supply Air Ducts
59.5 / 58.0 of
58.2% R.H. ROOMS
74.0 / 63.9 of
Supply Fan Cooling Coil
2800 cfm
Return Air Ducts
EnergyPro 4.1 by Energysoft User Number: 6712 Job Number: Page: 20 of 24
ROOM LOAD SUMMARY
PROJECT NAME DATE
Stamko Development T. 1. 7/9/2006
YSTEM NAME FLOOR AREA
HVAC -1 & 2 1,494
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
Suite 3
Suite 3
1
2,786
43,122
7,287
2,786
43,122
7,287
2,256
27,866
PAGE TOTAL 1 2,786 43,122 7,287 2,256
TOTAL 2,786 43,122 7,287 2,256
27,866
27,866
EnergyPro By EnergySoft User Number: User Job Number: Page:21 of 24
ROOM HEATING PEAK LOADS 71
Project Title Date
tamko Development T. 1. 7/9/2006
Room Information Design Conditions
Room Name Suite 3 Time of Peak Jan 12 am
Floor Area 1,494 Outdoor Dry Bulb Temperature 26OF
Indoor Dry Bulb Temperature 70 OF
Conduction Area 1 -1 -value AT 09 Rfu/hr
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 22 of 24
R-30 Roof R.30.2x10.24
surface
Area
1,494.0
x
x
x
x
x
x
x
x
x
x
X
X
x
X
x
x
x
x
x
X
x
x
x
x
x
x
x
x
x
x
x
X
x
x
x
x
x
X
x
2.00 x
0.0340
X
X
x
X
X
X
X
X
x
x
X
X
x
X
x
X
X
x
x
x
x
x
x
x
x
x
x
X
x
x
x
X
x
x
x
X
x
x
x
x
44
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
2,235
R-19 Wall .19.2x6.16
137.0
0.0740
44
446
Double Metal Tint
30.0
0.7200
44
950
Double Metal Tint
60.0
0.7200
44
1,901
Double Metal Tint
30.0
0.7200
44
950
Double Metal Tint
30.0
0.7200
44
950
Double Metal Tint
25.0
0.7200
44
792
R-11 Partition Wall .11.2x4.16
624.0
0.1100
44
3,020
R -1A Mill ON A 9YR 16)
291.0
44
947
Metal Door
21.0
0.7000
647
-
624.0
0.1100
44=3020
Slab -On -Grade
perimeter = 156.0
0.7300
44
5,011
Items shown with an asterisk (•) denote conduction through an interior
Infiltration: `1 1.001 x 1.064 x
chedule Air Sensible
Fraction
to another room.
1 494 X 1
Ceiling Height
0.500 / 6]
ACH
Page Total:
0
pT
20 870
6 996
TOTAL HOURLY HEAT LOSS FOR ROOM 27,866
EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 22 of 24
ROOM COOLING PEAK LOADS
di-
p-701-ecTitlet Date
Stamko Development T. I. 7/9/2006
ROOM INFORMATION DESIGN CONDITIONS
Room Name Suite 3 Time of Peak Jul 3 pm
Floor Area 1,494 Outdoor Dry Bulb Temperature 112 `k
Indoor Dry Bulb Temperature 74 OF Outdoor Wet Bulb Temperature 78 C�
Conduction
30 Roof R.30.2x10.24
19 Wall .19.24.16
3
Double Metal Tint
-11 Partition Wall (W.1 1.2x4.16)
-19 Wall .19.24.16
Metal Door
11 Partition Wall W.11.2x4.16
Area
1 1.494.01
1 624.01
1. Design Equivalent Temperature Difference (DETD)
Items shown with an asterisk (') denote conduction through an interior surface to another room.
Solar Gain
U -Value
1 0.03401
1 0.11001
DETD 1
X
X
X
X
X
X
X
X
X
72.5
=
=
=
=
=
=
=
=
=
86.2
27.1
39.5
43.2
39.1
57.6
U
30.0
Page Total
Orientation
Area
X
X
x
X
x
x
X
X
X
X
SGF
X
X
X
X
X
x
X
X
X
X
SC
Weighting
X
X
x
X
X
x
X
X
X
X
Factor
=
=
=
=
=
=
=
U
30.0
41
0.657
0.832
(N)
60.0
41
0.657
0.832
(N)
30.0
41
0.657
0.832
_(N)
30.0
41
0.657
0.832
(N)
25.0
41
0.657
0.832
Page Total
Btu/hr
3,682
874
3,416
2-709
930
575
3,952
16 138
Btu/hr
672
1,344
672
672
560
3,920
Sched. Weighting
Internal Gain Frac. Area Heat Gain Factor Btu/hr
i hts 1.0 X 1,494 X 1.120 Watts/sqft x 3.41 Btuh/Watt X 0.999 = 5,708
ccu ants 1.0c X 1,494 X 300 Btuh/OCC. / 10 sqft/occ. x 1.00 = 4,482
Receptacle 1.0c X 1,494 X 1.340 Wafts/sqft x 3.41 Btuh/Watt X 1.00 = 6,833
rocess 1.0c X 1,494 X 0.000 Wafts/sgft X 3.41 Btuh/Watt X 1.00 = 0
Infiltration: 1.00 X 1.064 X 1494 X 12.00 X 0.50 /6] x 38 = 6042
chedule Air Sensible Area Ceiling Height ACH OT
Fraction
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 43,122
Sched.
Latent Gain Frac. Area Heat Gain Btu/hr
ccu ants 1.00 X 1 494 X 3001 Btuh/OCC. / F 100 sqft/occ. = 4 482
Receptacle 1.00 x x 0 000 Watts/sgft x 1 3.4131 Btuh[Watt =
Process 1.00 x 1,494 X 0.000 Watts/sgft X 3.413 Btuh/Watt = 0
• Infiltration: x Latent
x � x x � / 6] x � = 2 805
chedule Air latent Area Ceiling Height ACH pyy
ROOM COOLING COIL LOADS
Project Title Date
Stamko Development 4- T. 1. 7/9/2006
ROOM INFORMATION DESIGN CONDITIONS
Room Name Suite 3 Time of Peak Jul 3 pm
Floor Area 1,494 Outdoor Dry Bulb Temperature 112 OF
Indoor Dry Bulb Temperature 74`F Outdoor Wet Bulb Temperature 78 OF
Conduction
-30 Roof R.30.2x10.24
-19 Wall .19.24.16
Double Metal Tint
-11 Partition Wall .11.2x4.16
-19 Wall .19.24.16
Metal Door
-11 Partition Wall .11.2x4.16
Area
1,494.0 X
137.0 X
175.0 X
624.0 X
291.0 X
21.0 X
624.0 X
X
X
1. Design Equivalent Temperature Difference (DETD)
Items shown with an asterisk (') denote conduction through an interior surface to another room.
Solar Gain
U -Value
0.0340
0.0740
0.7200
0.1100
DETD '
X
X
X
X
X
X
X
X
X
72.5
=
=
=
=
=
=
=
=
=
86.2
27.1
39.5
43.2
39.1
57.6
_(N)
30.0
Page Total
Orientation
Area
X
X
X
X
X
X
X
X
X
X
SGF
X
X
x
X
X
X
X
X
X
x
SC
Weighting
X
X
x
X
X
X
X
X
x
X
Factor
=
=
=
=
=
c
=
=
_(N)
30.0
41
0.657
0.832
(N)
60.0
41
0.657
0.832
(N)
30.0
41
0.657
0.832
(N)
30.0
41
0.657
0.832
(N)
25.0
41
0.657
0.832
Page Total
Btu/hr
3,682
874
3,416
2,709
930
575
3,952
16 138
Btu/hr
672
1,344
672
672
560
3 920
Sched. Weighting
Internal Gain Frac. Area Heat Gain Factor Btu/hr
i hts 1.0c x 1,494 X 1.120 Wafts/sqft x 3.41 Btuh/Waft x 0.999 = 5,708
ccu ants 1.0c X 1,494 X 300 Btuh/OCC. / 10 sgft/OCc. X 1.00 = 4,482
Receptacle 1.0 X 1,494 X 1.340 Wafts/sgft x 3.41 Btuh/Watt x 1.00 = 6,833
rocess r1.0 X 1,494 X 0.000 Wafts/sqft X 3.41 Btuh/Watt X 1.00 = 0
Infiltration: I 1.00 X 1.064 X 1 494 X 12.00 x 0.50 1601 X 38 = 6 042
`Schedule Air Sensible Area Ceiling Height ACH DT
Fraction
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 43,122
Sched. Btu/hr
Latent Gain Frac. Area Heat Gain
Occupants 1.00 X 1494 X 300 Btuh/OCC. / 100 sqft/occ. = 4482
Receptacle 1.00 x x Watts/sgft x Btuh[Watt =
Process 1.00 x 1,494 X 0.000 Watts/sgft X 3.413 Btuh/Waft = o
• Infiltration: x71 x x x � / 6] x � _
chedule Air Latent Area Ceiling Height ACH pyy