The URL can be used to link to this page

07-0224 (RC)1+ P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number. r 07-00000224 Property Address: L'79255 -HIGHWAY 111 STE APN: 649-030-999-8 -30420 Application description: REMODEL - COMMERCIAL Property Zoning: REGIONAL COMMERCIAL Application valuation: 25000 c&t�P4'4Qumm BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Applicant: Architect or Engineer: -------------------------------------------------- LICENSED CONTRACTOR'S DECLARATION hereby affirm under penalty of perju that I am licensed un r provisions of,Chapter 9 (commencing with Section 7000) of Division 3 of the B iness and P fession s de, and my License is in full force and effect. License Cl ss: r1 ce a No.: 762799 Date 041 Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars 1$5001.: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). I—) I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPERA11T Owner: STAMKO DEV CO C/O PROVIDENT FINANCIAL MGMT 10345 W OLYMPIC BLVD 2 FL LOS ANGELES, CA 90064 . VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 7,77-7153 Date: 1/31/07 Contractor: STAMKO DEVELOPMENT CO L PKOWYOFLAQUINJU 6080 CENTER DR, #668 LOS ANGELES, CA 90045"� ZO(310)242-5637Lic. No.: 762799 ------------------ WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided - for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 1557214-2006 I certify that, in the pe rmance of the work for w ' permit is issued, I shall not employ any person in any mann r o as to become subject o the w kers' compensation laws of California, and agree that, if I Id becomes ject to a worker compensation provisions of Section 33700 of the Labor o e, I shall f with co ply with ose provisions. Dat . 7 d • Applicant: WARNING: FAILURE TO SECURE W RKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMIN L PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of suc permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that a bove information is correagreecomply with all city and county ordinances and state laws relating to b i ing constructs , and herepresentatives of this co my o mann er upon the above-mentioned prop y for inspe n purposes. Dat 0 ` Signature (Applicant or Agent): LQPERAIIT t Application Number . . . . . 07-00000224 Permit BUILDING PERMIT Additional desc . Permit Fee . . . . 252.00 _ Plan Check Fee 163.80 Issue Date . . . . Valuation . . . . 25000 :Expiration Date 7/30/07 Qty Unit Charge Per Extension BASE FEE 45..00 23.00 9.0000 THOU BLDG 2,001-25,000 ---------------------------------------------------------------------------- 207.00 Permit ELECT - ADD/ALT/REM ^ Additional desc . Permit Fee 33.00 Plan Check Fee 8.25 Issue Date Valuation . . . 0' Expiration Date 7/30/07• Qty Unit Charge Per Extension BASE FEE 15.00 900.00 .0200 ELEC GARAGE OR NON-RESIDENTIAL, ------------------ ------------------------------------------------------------ 18.00 Permit ` . . . MECHANICAL Additional desc . Permit Fee . . . . 24.00 Plan Check Fee 6.00 - Issue Date . . IValuation . . .`. 0 Expiration Date 7/30/07 Qty Unit Charge Per Extension BASE FEE 15.00 1.00 9.0000 EA MECH APPL REP/ALT/ADD -------=--------------=----------------------------------------------------- 9.00 Permit PLUMBING Additional desc . Permit Fee . . . . 70.50 Plan Check Fee 17.63 Issue Date Valuation 0 Expiration Date 7/30/07.. Qty Unit Charge Per Extension BASE FEE 15.00 8.00 6.0000 EA PLB FIXTURE 48.00 1.00 7.5000 EA PLB WATER HEATER/VENT 7.50 ---------------------------------------------------------------------------- Special Notes and Comments TENANT IMPROVEMENT DIPPIN DOTS.900•SQ. FT. January 31, 2007 9:10:34 AM LQPERAIIT t Application'Number 07-00000224 Special Notes and Comments jjohnson Fee summary Charged Paid•. Credited Due Permit Fee Total 379.50 .00 .00 379.50 Plan Check Total _.195.68 .0.0 .00 195.68 Grand Total 575.18 .00 .00 575.18 LQPERHIIT Bl�CN78 City of La Quinta Building U Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # Z,lJ. 0 Project Address: Owner's Name: V,1bb �� e - A. P. Number: Address: Legal Description: City, ST, Zip: Contractor: IJ4 V—c�, Telephone: Address: C Project Description: ^` lA v� City, ST, Zip: L4S, t K S `) Telephone: 771 It W State Lic. # : City Lic. #: a Arch., Engr., Designer: rte L� U OP Address: n F1, City, ST, Zip: Telephone: rif �t�j Construction T 8 ype: 1� �3 Occupancy: State Lic. #: Project type (circle one): g� Add'n Alter Repair Demo Name of Contact Person: to L V A Sq. Ft.: # Stories: # Units: Telephone # of Contact Person: Lob Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS UNE # Submittal Req'd Rec'd TRACKING PERMIT FEES (� AAVDll� Plan Sets s Plan Check submitted IQ p7 Item Amount Structural Cates. Reviewed, ready for corrections Plan Check Deposit Truss Calcs. Called Contact Person Plan Check Balance Energy Calcs. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2" Review, ready for correction(r.e 3 Electrical Subcoutactor List Called Contact Person11363 Plumbing Grant Deed Plans picked up S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- ''' Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue jl School Fees I �1Y4L 44 CV I �. Total Permit Fees i ly 1 U-1 CN MgRD ( in nov5 ) 19107 `P c vp (i/)P�Atcv " /z¢/o7 OP 4MRwm COACHELLA VALLEY WATER DISTRICT ASSESSOR'S PARCEL NUMBER 85-995 Avenue 52 Coachella, California 92236 (760) 398-2651 APPLICATION FOR WASTEWATER INTERCEPTOR/SEPARATOR APPROVAL APPLICANT:' Submit this form with a copy of a SCALED plot plan (1" = 20' to 1" = 40' SCALE) drawn to District specifications. A nonrefundable filing fee is required when the application is submitted. Check must be made payable to the Coachella Valley Water District. Approval of this application shall remain valid -for a period not to exceed one (1) year from date of payment. Plan Check No. Agent, Contmcto Con t Person Address State Zip Telephone ," - \-I ri FP, -4h nR ity d r-,•(> . CA ra'18.1 PA Owner Address City State Zip Telephone l L Ser, LA iDUK44 %ZM ('174-6too Job Property Address City Zi -I •ate I I I s� S Q IN Cd • f -'Uzip Legal Description I IDBA . PLEASE COMPLETE THIS SECTION FOR REVIEW OF FOOD ESTABLISHMENTS NOTE: PLANS WILL NOT BE ACCEPTED UNLESS THIS APPLICATION IS COMPLETE AND THE PLAN CHECK FEE IS PAID. GENERAL CONSTRUCTION: Type of Construction - New lO Pte. New Food Facility V Remodel of Existing Food Establishment Hours of Operation Seating Capacity: Internal External External Seating with Misters'or Heaters Bar with Food Service Bar Nonfood Service Water Softener Service: Multiservice (reusable) Single Service (disposable) OWNER/REPRESENTATIVE DECLARATION: I certify that I have read the entire application and state that all information is correct. I understand that the amount of fee paid is based on my declaration of information on this form and that incorrect information is grounds for denial of the submitted plans. I also understand that plans will be discarded if not picked up within sixty (60) days of approval or denial and that no inspection of my establishment will be conducted, or approval granted to operate, until all proper information ed has received and plans have been approved and returned. Signature � - Date 1 1� No. of Systems ❑ New ❑ Existing ❑ Replacement ❑ Addition ❑ Connect to Sewer No. Dwelling Units Fixture Units ❑ Sand/Oil ❑ Grease Interceptor ❑ Lim Trap ❑ Clarifier Grease hnt meptor Waived Gal. Approved ❑ Denied ❑ Conditional Approval* *See Remarks Signature r�jeel Date Fee S , -5-0 oa Check No. , 4 Date Lo D Initial CVWD-921 Plan Check # RIVERSIDE COUNTY COMMUNITY HEALTH AGENCY A. DEPARTMENT OF ENVIRONMENTAL HEALTH FOOD ESTABLISHMENT PLAN APPROVAL NOTICE Date 1/17/07 Project Name Dippin Dots Address 79-255 Hwy 111 Ste. 5, La Quinta Plans Submitted by Larry Lenarz Phone 360-0106 Owner Larry & Lucinda Address 44375 Buttercup Ln. La Quinta Phone 360-0106 Lenarz The plans are now approved subject to the conditions listed below and the attached compliance sheet. 1. Provide a grease interceptor sizing letter from the appropriate agency prior to final approval. 2. The 3 -compartment sink must have minimum 18"xl8" drainboards. 3. The air curtain must be an approved high velocity air curtain capable of producing 1600 fpm at 3' above the floor. (ie. Mars NCH, NH). 4. All sneeze guard protection will be evaluated at on site inspections. 5. Provide a 12" high splash guard on the right side of the hand sink in the service area. See redline correction on sheet A 2.75 6. Provide a minimum 46,000 BTU water heater. 7. Floor sinks must not be buried under equipment or cabinetry. (ie. the floor sink under the front service area hand sink.) Floor sinks must be at least half exposed with a curb around the backside coved with approved 3/8" radius cove base tile. 8. Provide approved integral 3/8" radius cove base in conjunction with the quarry or ceramic tile. Slim foot tile is not approved on tot) of ceramic or auarry tile. 9. All wall paint and interior surfaces of all cabinetry must be light in color. Paints must be gloss or semi gloss finish. CONSTRUCTION INSPECTIONS: Contact the Plan Checker for a Preliminary Inspection when construction is approximately 80% complete, with plumbing, rough ventilation, and rough equipment installed. Request for inspection should be made at least five (5) working days in advance. A FINAL INSPECTION MUST be made upon completion of ALL work including finished details. APPROVAL to operate shall not be granted, or remodeled areas approved to operate, until the facility has passed the FINAL INSPECTION, .and "APPLICATION TO OPERATE" has been completed and PERMIT FEES have been paid. Request for inspection should be made at least five (5) working days in advance. PLANS CHECKED BY Kelly Amon R.E.H:S. III Phone (760) 320-1048 I acknowledge the corrections noted construction: Signature Company Name. icated on the plans and agree to incorporate them during Date - 'nl- 0 brc k L ti I A%S %'Cl kvso DEH -SAN -178 (Rev 2/06) V Corona Hemet Indio' Murrieta Palm Springs Riverside 2275 S. Main St Suite 204 800 S. Sanderson . 47-950 Arabia St "A" .38740 Sky Canyon Dr 2500 N. Palm Canyon Dr 4065 County Cir (951) 273-9140 (951) 766-2824 (760) 863-8287 (951) 461-0284 (760) 320-1048 (951) 358-5172 Fax (951) 520-8319 Fax (951) 766-7874 Fax (760) 863-8303 Fax (951) 461-0245 Fax (760) 320-1470 Fax (951) 358-5017 John R. Hawkins Fire Chief Proudly serving the Unincorporated Areas of Riverside County and the Cities of: Banning Beaumont 4. Calimesa Canyon Lake 4. Coachella Desert Hot Springs Indian Wells 4. Indio Lake Elsinore La Quinta 4. Moreno Valley 4. Palm Desert Perris Rancho Mirage 4. San Jacinto Temecula Board of Supervisors Bob Buster, District 1 John Tavaglione, District 2 Jim Venable, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT In cooperation with the California Department of Forestry and Fire Protection 210 West San Jacinto Avenue • Perris, California 92570 • (909) 940-6900 • Pax(909)940-69'1-0 October 11, 2006 Gabriel Lujan 45175 Panorama Drive, Ste A Palm Desert, CA 92260 RE: TENANT IMPROVEMENT PLAN CHECK LAQ-06-TI-084 / Dippin Dots at 79255 Hwy 111, Ste 5, La Quinta, CA You have been issued a release for a tenant improvement on an existing building. THIS IS NOT AN OCCUPANCY PERMIT. It is prohibited to use/process or store any materials in this occupancy that would classify it as an "H" occupancy per Sec. 307 of the 2000 UBC. THE FOLLOWING CONDITIONS MUST BE MET PRIOR TO INSPECTION: Install door hardware and exit signs as per Chapter 10 of the 2000 UBC Install Knox Lock Boxes, Models 4400, 3200 or 1300, mounted per recommended standard of the. Knox Company. Plans must be submitted to the Fire Department for approval of mounting location/position and operating standards. Special forms are available from this office for the ordering of the Key Lock Boxes. This form must be authorized and signed by this office for the correctly coded system to be purchased. If the building/facility is protected with a fire alarm system or burglar alarm system, the lock boxes will require "tamper" monitoring. A minimum 2A10BC Fire Extinguisher, (State Fire Marshal Approved) must be mounted in a visible location within 75' walking distance from any point in your building or suite. Fire extinguishers can be installed by a licensed extinguisher company with a State Fire Marshal service tag attached to the extinguisher, or purchased from a retail store with a sales receipt attached. A licensed fire extinguisher company must service extinguisher yearly. ELECTRICAL PANEL BOX: All breakers must be labeled and a clearance of 36 inches must be maintained around the panel at all times. OTHER REQUIREMENTS: Approved building address shall be placed in such a position a to be plainly visible and legible from the street. Said numbers shall contrast with their background. A durable sign stating"This door to remain unlocked during business hours" shall be placed. on or adjacent to the front exit door. - The sign shall be in letters not less than one inch high on a contrasting background. EMERGENCY SERVICES DIVISION . PLANNING SECTION • INDIO OFFICE 82-675 Highway 111, 2nd FI., Indio, CA 92201 • (760) 863.8886 • Fax (760) 863-7072 F . Applicant/installer.shall be responsible to contact the Fire Department to schedule inspections. A re-inspectiortfee will be required if more than one (1) inspection is necessary. Requests for inspections are:to be made at least 72 hours in advance and may be arranged by calling (760) 863-8886. , All questions regarding the meaning of these conditions should be referred to the Fire Department Planning & Engineering Staff at (760) 863-8886. Sincerely, Tracy Hobday Chief Fire Department Planner By: O'C Sonia Cooley Fire Safety Specialist ' COUNTY OF RIVERSIDE COMMUNITY HEALTH AGENCY DEPARTMENT OF ENVIRONMENTAL HEALTH ENVIRONMENTAL HEALTH SERVICES SUPPLEMENTAL REPORT TO SAN. FORM # DATE 3 SUBJECT //� {�(�/� r //"i PERMIT NO. &-A S1". ADDRESS`7ZSS/ I ►�l �r�. L�.� r�U/�7G INSPECTOR REMARKS:S`y�j m;vl, vi► G S www /� f14W 5��V o U -ha- Lmd, .u��1 V DEH -SAN -118 (Rev 8/02) Distribution: WHITE—Office; CANARY—Owner; PINK—Office COUNTY OF'RIVERSIDIE- COMMUNITY HEALTH AGENCY DEPARTMENT OF ENVIRONMENTAL HEALTH ENVIRONMENTAL HEALTH SERVICES SUPPLEMENTAL REPORT TO SAN. FORM # DATE Lo SUBJECT llf2(2111 P01 PERMIT NO. LA -A. ADDRESS —7 V4 t1l - INSPECTOR TODYWObS-) REMARKS: c>e c r))- 6 1; OtkL4, 0 t K 6 h1b UD -y A -P V 0 �Lnd Inv 47UL Lfas 0-( AppnveA 4v opUcc-c,,- C,D-vl-A* U�,A ec` (k VIA Q. �qyp\-) A-c--q,,-yyi D4 ke.,u A, LL C -w, LA -e,-3 1�. to (e c �-eA do I?— A I cl -61 So I.- DEH -SAN -118 J 1 1 r .. Certificate of Occu ancy, OF Building & Safety Department This Certificate is issued pursuant to the requirements of Section .109 of the California Building, " Code, certifying that, at the time of issuance, this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/,or use. BUILDING ADDRESS: 79-255 HIGHWAY 111 STE #5. Use classification: COMMERCIAL (DIPPIN DOTS) -Building Permit No.: 07-224 Occupancy Group: B Type of Construction: VN Land Use Zone: CR Owner of Building: STAMKO DEV CO Address: 10345 W. OLYMPIC BLVD 2 FIL F City,, ST, ZIP: LOS ANGELES, CA 90064 By: STEVE TRAXEL Date: APRIL 4, 2007 Building Official u POST IN A CONSPICUOUS PLACE Z r TITLE 24 REPORT Title 24 Report for: Stamko Development T.I.-Dipping Dots 79-255 Highway 111, Suite 5 La Quinta, Ca 92253 Project Designer: Gabriel Lujan and Associates 45-175 Panorama Dr., Suite A Palm Desert, Ca 92260 (760) 568-8545 Report Prepared By: Tim Scott Scott Design & Title 24 77085 Michigan Dr. Palm Desert, CA 92211 (760) 200-4780 Job Number: Date: 8/24/2006 CITY OF LA QUINTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION BY, The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.1 by EnergySoft Job Number: User Number: 6712 4 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 1 Of 3 PERF -1 PROJECT NAME This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the DATE Stamko Development T.I.-Dipping Dots DOCUMENTATION AUTHOR Tim Scott 8/24/2006 PROJECT ADDRESS The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents is BUILDING CONDITIONED FLOOR AREAE 79-255 Highway 111, Suite 5 La Quinta through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ZONE CLIMAT15 PRINCIPAL DESIGNER - ENVELOPE TELEPHONE Building Permit # Gabriel Lujan and Associates (760) 568-8545 PHASE OF CONSTRUCTION DOCUMENTATION AUTHOR TELEPHONE Checked by/Date Scott Design & Title 24 (760) 200-4780 Enforcement Agency Use GENERAL INFORMATION This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation is a urate and complete. DOCUMENTATION AUTHOR Tim Scott DATE OF PLANS DAT The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents is BUILDING CONDITIONED FLOOR AREAE 900 ScI.Ft. through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ZONE CLIMAT15 BUILDING TYPE ® NONRESIDENTIAL HIGH RISE RESIDENTIAL ❑ ❑ R 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section HOTEL/MOTEL GUEST ROOM PHASE OF CONSTRUCTION ® NEW CONSTRUCTION ADDITION Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) EXISTING + ADDITION/ALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation is a urate and complete. DOCUMENTATION AUTHOR Tim Scott SIG A, DAT The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building as designed meets the energy efficiency requirements contained in sections 110, 116, through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ENV. LTG. MECH. ❑ ❑ ❑ 1. 1 hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer, mechanical engineer, or I am a licensed architect. ❑ ❑ R 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ ❑ ❑ 3. 1 affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ENVELOPE COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures ENV -1 Required Forms PRINCIPAL ENVELOPE DESIGNER - NAME SIGNATURE LIC. NO. DATE Gabriel Lu'an and Associates LIGHTING COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures LTG -1, LTG -2 Required Forms PRINCIPAL LIGHTING DESIGNER - NAME Gabriel Wan and Associates SIGNATURE LIC. NO. DATE MECHANICAL COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures ECH-1, MECH-2 MECH-3 MECH-5 Require orms RINCIPAL MECHANICAL DESIGNER - NAME IG U E LIC. NO. DAzE FScott Design & Title 24 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Pape:3 of 24 1 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 2 of 3 PERF -1 PROJECT NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 ANNUAL TDV ENERGY USE SUMMARY kBtu/s ft- r Standard Proposed Compliance ENERGY COMPONENT Design Design Margin Space Heating 2.63 0.05 2.58"° Space Cooling 520.17 440.74 79.42 Indoor Fans 111.90 114.48 -2.58 Heat Rejection 0.00 0.00 0.00 Pumps & Misc. 0.00 0.00 0.00 Domestic Hot Water 57.40 57.89 -0.49 Lighting 165.26 174.52 -9.25 Receptacle 82.18 82.18 0.00 Process o.o0 0.00 0.00 TOTALS: 939.54 869.86 69.68 Percent better than Standard: 7.4% ( 7.4% excluding ( standard Proposed 1 ............................................ 50 100 150 200250 300 350 400 450 500 kBtu/sgR-yr � 0 process) BUILDING COMPLIES GENERAL INFORMATION Building Orientation (N)Odeg Conditioned Floor Area 900 sgft. Number of Stories 1 Unconditioned Floor Area 0 sgft. Number of Systems 1 Conditioned Footprint Area 900 sgft. Number of Zones F 11 Fuel Type Natural Gas Orientation Gross Area Glazing Area Glazing Ratio Front Elevation (N) 180 sgft. 60 sgft. 33.3% Left Elevation (E) 720 sgft. 0 sgft. 0.0% Rear Elevation (S) 180 sgft. 0 sgft. 0.0% Right Elevation (W)l 720 sgft. 0 sgft. 0.0% Total 1,800 sgft. 1 60 sgft. 3.3% Roof 900 sgft. E=� sgft. 0.0% Standard Proposed Lighting Power Density 1.500 W/sgft. 1.584 W/sgft. Prescriptive Env. Heat Loss 249 Btu/h 253 Btu/h Prescriptive Env. Heat Gain 18,803 Btu/h-F 19,575 Btu/h-F Remarks: Run Initiation Time: 08/24/06 14:19:00 Run Code: 1156454340 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:4 of 24 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 3 of 3 PERF -1 PROJECT NAME Stamko Development T.I.-Dipping Dots DATE 8/24/2006 ZONE INFORMATION System Name Zone Name Occupancy Type Floor Area (sqft.) Inst. LPD (W/sf)1 Ctrl. Allowed LPD Credits > Area Tailored (W/sf)2 (Wis 3 (W/S4 Proc. toads (W/sf) HVAC -1 Suite 5 Comp Bldg Retail and Wholesale 900 1.58 Notes: 1. See LTG -2-C 2. See LTG -4-C 3. See LTG -5-C (items marked with asterisk, see LTG -2 -C by others) (by others) 4. See LTG -6-C Items above require special documentation EXCEPTIONAL CONDITIONS COMPLIANCE CHECKLIST The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. The HVAC System "Carrier 50JX0605" is designated as 3 Phase, or is Exempted from the NAECA 13 SEER requirement. di no exceptional features ustea in tors performance approach application have specifically been reviewed. Adequate written justification and ocumentation for their use have been provided by the applicant. Authorized Sianature or Stamo EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:5 of 24 1 CERTIFICATE OF COMPLIANCE ENV -1-C NAME Stamko Development T.I.-DiDDina Dots OPAQUE SURFACES DATE 8/24/2006 # Surface Type Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond' Status Joint Appendix IV Reference Location / Comments 1 Roof 900 0.034 R-30 R-0.0 0 0 New 02-A26 Suite 5 2 Wall 120 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 5 3 Wall 720 0.110 R-11 R-0.0 90 90 New 09-A2 Suite 5 4 Wall 159 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 5 5 Door 21 0.700 None R-0.0 180 90 New 28-A2 Suite 5 6 Wall 720 0.110 R-11 R-0.0 270 90 New 09-A2 Suite 5 Existing, Altered, Removed) FENESTRATION SURFACES FIMore than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from I Standards Table 116-A and B. Certificate shall be filed in the contractors oroiect office dudno construction and in the buildino manaoers office after—f-Minn # Tvpe Area U -Fac' SHGC2 Act. Am. Cond. Stat. lGlazing Type Location/ Comments 1 Window Front N 30 0.720 NFRC 0.59 NFRC 0 New Double Metal Tint Suite 5 2 Window Front N 24 0.720 NFRC 0.59 NFRC 0 New Double Metal Tint Suite 5 3 Window Front N 6 0.720 NFRC 0.59 NFRC 0 New Double Metal Tint Suite 5 1 D -tactor type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING Window Overhang Left Fin Right Fin ## Exterior Shade Type SHGC Hgt. Wd. Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 1 None 0.76 2 None 0.76 3 None 0.76 MINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES ❑The proposed building contains an enclosed space with floor area greater than 25,000 sq.ft, a ceiling height greater than 15 feet and a LPD for general lighting of at least 0.5 Wlsq.ft. If this box Is checked, ENV4-C must be filled out when submitting under the Prescriptive Compliance Approach. Run Initiation Time: 08/24/06 14:19:00 Run Code: 1156454340 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:6 of 24 CERTIFICATE OF COMPLIANCE (Part 1 of 3) LTG -1 -C r ROJECT NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES INSTALLED WATTS INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C) 1,426 PORTABLE LIGHTING (From LTG -3-C) 0 LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 0 CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 1,426 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED ❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 1,426 ❑X PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 0 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION (Room #) CONTROL IDENTIFICATION CONTROLTYPE (Auto Time Switch, Dimm Check if SPACE CONTROLLED kaylightingi NOTE TO FIELD Run Initiation Time: 08/24/06 14:19:00 Run Code: 1156454340 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Paae:7 of 24 4 CERTIFICATE OF COMPLIANCE (Part 3 of 3) LTG -1-C-] PROJECT NAME Stamko Development T.I.-Dipping Dots DATE 1 8/24/2006 Designer: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for lighting systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Before an occupancy permit is granted for a newly constructed building or space, or a new lighting system system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building department that: A. Certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of§ 10-103(b) and Title 24 Part 6. Test Description Test Performed By: O LTG -2-A: Lighting Control Acceptance Document - Occupancy Sensor Acceptance - Manual Daylight Controls Acceptance - Automatic Time Switch Control Acceptance Equipment requiring acceptance testing O LTG -3-A: Automatic Daylighting Controls Acceptance Document Equipment requiring acceptance testing EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Paoe:8 of 24 1 17 - CERTIFICATE OF COMPLIANCE MECH-1-C PROJECT NAME DATE Stamko Development T.I.-Dippinq Dots 8/24/2006 uesigner: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: SYSTEM ACCEPTANCE. Before an occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, MECH-I-A Form shall be submitted to the building department that certifies plans, specifications, installation certificates, and operating and maintenance information meet the reauirements of Section 10-1 03(b) and Title 24 Part 6 STATEMENT OF COMPLIANCE ❑ MECH-2-A: Ventilation System Acceptance Document -Variable Air Volume Systems Outdoor Air Acceptance -Constant Air Volume Systems Outdoor Air Acceptance Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. ❑ MECH-3-A: Packaged HVAC Systems Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. ❑ MECH-4-A: Air -Side Economizer Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. Units with economizers that are installed at the factory and certified with the commission do not require equipment testing but do require construction inspection. ❑ MECH-5-A: Air Distribution Acceptance Document Equipment requiring acceptance testing This test required If the unit serves 5, 000 fi2 of space or less and 25% or more of the ducts are in nonconditioned or semiconditioned space like an attic. New systems that meet the above requirements. Retrofit systems that meet the above requirements and either extend ducts, replace ducts or replace the packaged unit. ❑ MECH-6-A: Demand Control Ventilation Acceptance Document Equipment requiring acceptance testing All new DCV controls installed on new or existing packaged systems must be tested. ❑ MECH-7-A: Supply Fan Variable Flow Control Acceptance Document Equipment requiring acceptance testing All new VA fan volume controls installed on new or existing systems must be tested ❑ MECH-8-A: -Hydronic System Control Acceptance Document -Variable Flow Controls Applies to chilled and hot water systems. , -Automatic Isolation Controls Applies to new boilers and chillers and the primary pumps are connected to a common header. -Supply Water Temperature Reset Controls Applies to new constant /low chilled and hot water systems that have a design capacity greater than or equal to 500,000 Btu/hr. -Water-loop Heat Pump Controls Applies to all new watertoop heat pump systems where the combined loop pumps are greater than 5 hp. -Variable Frequency Controls Applies to all new distribution pumps on new variable flow chilled, hydronic heat pump or condenser water systems where the pumps motors are greater than 5 hp. Equipment requiring acceptance testing EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:9 of 24 N 4- 0 r tf N 0- (D C) O Q IT CV 00 w Q 0 N O 0 CD 0 O U) w Q Z F - w w O a 0 (O (O O C14 Iq N 0 rn a Q m U U N a Installed M CL 02 °E o LL V Watts J Z O ED p LU In 0 �_ V j N O J O o r z J w Q (Gxl) H Z mIx v O U IL = E z z 0 � � r Number of Luminaires � CEC C= Defaults X X O C) Wafts cj per ((0 N Luminaire r Number of C� O LL Ballast per 'r'- CV Luminaire Watts M M U) w per N Lamp R Number of N 'q m 0 Lamps per N CLE Luminaire t4 J U Lamp Type co ccH N V_ U- LL c � d U U _N _N Q co C N F to N N N J > > LL LL .v v N �T a� E M Z 0 (O (O O CD 0 N 0 rn a Q m U U N a w CL 02 °E o LL V J Z O ED p LU In 0 �_ V j N O J O o r z J w Q H Z mIx v O U IL = E z z 0 r m 0 IV N N o� L: E E Z C , ro w 'c C 3 0 o O1 W a v 0 a w AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C f PROJECT NAME DATE r1 Stamko Development T.I.-Dipping Dots 8/24/2006 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation • Duct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. AIR SYSTEMS, Central or Single Zone HVAC -1 1 Reference on Plans or Specification 1 112(a) 7.20 HSPF 112(a) 12.0 SEER / 10.2 EER 112(b) Yes 112(c), 115(a) n/a 121(b) Yes 121(b) 180 cfm 121 c No 121(c) No 121 c 122(e) Programmable Switch 122(e) Heating & Cooling Required 122 Auto 122() n/a 123 124 R-4.2 144 a & b n/a 144 a&b 0btuh 144 a & b n/a 144 a & b 40,262 btuh 144 c Constant Volume 144 (c) 144 c Yes 144 d No 144 a No Economizer 144 Constant Tem 144(f) Constant Temp 144 k) No Lug.a��►��rr��.a�•1u�11uu1!��a!r1l�rirarr�r��rr►. EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Paae:11 of 24 1 WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2 MECH-2-C PROJECT NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 71 SYSTEM FEATURES 2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, H dronic Loops ITEM OR SYSTEM TAG(S) Number of Systems MANDATORY MEASURES Equipment Efficiency Pipe Insulation PRESCRIPTIVE MEASURES Calculated Capacity Proposed Capacity Tower Fan Controls Tower Flow Controls Variable Flow System Design Chiller and Boiler Isolation CHW and HHW Reset Controls WLHP Isolation Valves VSD on CHW, CW & WLHP Pumps > 5 HP DP Sensor Location T-24 Section Reference on Plans or Specification' 112(a) 123 144(a&b) 144(a&b) 144 h 144 h 144 0) 144 144 0) 144 144 144 •1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. ITEM OR SYSTEM TAG(S) Number of Systems MANDATORY MEASURES Water Heater Certification Water Heater Efficiency Service Water Heating Installation Pool and Spa Efficiency and Control Pool and Spa Installation Pool Heater - No Pilot Light Spa Heater - No Pilot Light 113 (a) 113 b 113 (c) 114 a 114 b 115 (c) 115 d Service Hot Water, Pool Heating DHW Heater 1 AO SMITH ELJF-10 99% n/a n/a n/a n/a Reference on Plans or Specification 1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" ins the column. Run Initiation Time: 08/24/06 14:19:00 Run Code: 1156454340 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:12 of 24 U M No ►E, 0 O N F L 00 1 w L a o � t t L c t O 0 C m Q _O a) N 0 Z Transfer Air N 0 Design Min. Ai L Setpoint c s" Uv m a u c Max of m [ n Columns H, J, U t5 - cn M z K or 300 CFM a Bx0.4 c y CO — > a Y CFM/sq. ft. m > LJ r g 30% of Design 5 Zone Supply 3 CFM m Design C) $ H O m — Vent. Air F CFM O REQ'D V.A00 00_ O � i = Max of y m g E (D or G) a 3 N Min CFM m o a ; 2 E Fn C7 by Occupant v n m (EXF) o 2-=0 U CFM Z LL per x m E Qa Person m a m s E L) U m io aci E t Number of O W People O a o `o o E Min CFM 00 N c y N t � p by Area04 (B X C) m Eo N N N N o Z m` c E to .. G Q CFM N o T c `o ¢ 0. M y per o 0.EE ;= E W Square Foot L g :c o z' Q Condition `o m d > m Area m aj(SF) a an d v m s > d U) my w ` E ym - m m = e o E m o Z `o a o x mo U mm O m> t= 0 Q m i m v S U) J m 5 m LL c i x o Qn I— W `o a 0 E ci c nm i Q h ii] x m 0 H V m E m a r J Q Z w>� c c m m o c E ?, m �.i N o m n _ c o= x y o O m K 0 U '; m a Q z M IL- V� N LO c W WN W 2- -+ Y 2 Z U) _ 17, MECHANICAL EQUIPMENT DETAILS Part 1 of 2 MECH-5-C PROJECT NAME Stamko Development T.I.-Dipping Dots DATE $24/2006 CHILLER AND TOWER SUMMARY Efficiency Tons PUMPS Equipment Name Equipment Type Qty. Tot. Qty GPM BHP Motor Eff. Drive Eff. Pump Control D / BOILER MM Energy Standby ITANK INSUL. Rated Vol. Condition Factor Loss or Ext. System Name System Type Distribution Type Qty Input I (Gals.) Status or RE J Pilot I R -Val. 0 SMITH ELJF-10 Small Elec. Point of Use 1 5,120 10 New 0.95 n/a n/a AM CENTRAL SYSTEM RATINGS HEATING COOLING Aux. Condition System Name System Type Qtv —Output kW Eff. Out ut Efficiency Status Economizer Type Carrier 50JX0605 Packaged DX 1 0 0.0 7.20 HSPF 60,000 12.0 SEER / 10.2 EER New No Economizer r ENVELOPE MANDATORY MEASURES ENV -MM PROJECT NAME DATE Stamko Development T.I.-Dippinq Dots I 8/24/2006 DESCRIPTION Designer Enforcement ❑ §118(,) Installed Insulating Material shall have been certified by the manufacturer to comply ". with the California Quality Standards for insulating material, Title 20, Chapter 4, Article 3. X❑ § 118(c) All Insulating Materials shall be installed in compliance with the flame spread rating and smoke density requirements of Sections 2602 and 707 of Title 24, Part 2. FX]§ 117(a) All Exterior Joints and openings in the building that are observable sources of air leakage shall be caulked, gasketed, weatherstripped or otherwise sealed. ❑ § 116(b) Site Constructed Doors, Windows and Skylights shall be caulked between the unit and the building, and shall be weatherstripped (except for unframed glass doors and fire doors). X] § 116(a)1 Manufactured Doors and Windows installed shall have air infiltration rates not exceeding those shown in Table Number 1-E. of the Standards. Manufactured fenestration products must be labeled for U -value according to NFRC procedures. X❑ §118(e) Demising Walls in Nonresidential Buildings: The opaque portions of framed demising walls in nonresidential buildings shall have Insulation with an installed R -value of no less than R-11 between framing members. EnergyPro By EnergySoft User Number: User Job Number: Page: 15 of 24 A B C D E F Room Name Task/Activity Description Room Length (L) ft Room Width (WW) ft Room Cavity Height (H) (ft) Room Cay. Ratio 5xHx(L+W) /(LxW) A B C D E F Room Name Task/Activity Description Room Area (A) (so Room Perimeter (P) (ft) Room Cavity Height (H) (ft) Room Cay. Ratio 2.5 x H x P /A EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page:16 of 24 1 is is LIGHTING MANDATORY MEASURES LTG -MM NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 DESCRIPTION Designer Enforcement X❑ §131(d)1 For every floor, all interior lighting systems shall be equipped with a separate automatic control to shut off the lighting. This automatic control shall meet the requirements of Section 119 and may be an occupancy sensor, automatic time switch, or, other device capable of automatically shutting off the lighting. a §131(d)2Override for Building Lighting Shut-off: The automatic building shut-off system is provided with a manual, accessible override switch in sight of the lights. The area of override is not to exceed 5,000 square feet. §119(h) Automatic Control Devices Certified: All automatic control devices specified are certified, all alternate equipment shall be certified and installed as directed by the manufacturer. X❑ §111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the project are certified and listed in the Directory. All installed fixtures shall be certified. X] §132 Tandem Wiring for One and Three Lamp Fluorescent Fixtures: All one and three lamp fluorescent fixtures are tandem wired with two lamp ballasts where required by Standards Section 132; or all one and three lamp fluorescent fixtures are I specified with electronic high -frequency ballasts and are exempt from tandem wiring requirements. X❑ §131(a) Individual Room/Area Controls: Each room and area in this building is equipped with a separate switch or occupancy sensor device for each area with floor -to - ceiling walls. 5131(b) Uniform Reduction for Individual Rooms: All rooms and areas greater than 100 square feet and more than 0.8 watts per square foot of lighting load shall be controlled with bi-level switching for uniform reduction of lighting within the room. §131(c) Daylight Area Control: All rooms with windows and skylights that are greater than 250 square feet and that allow for the effective use of daylight in the area shall have 50% of the lamps in each daylit area controlled by a separate switch; or the effective use of daylight cannot be accomplished because the windows are continuously shaded by a building on the adjacent lot. Diagram of shading during different times of the year is included on plans. §131(e) Display Lighting. Display lighting shall be separately switched on circuits that are 20 amps or less. EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 17 of 24 is MECHANICAL MANDATORY MEASURES Part 1 of 2 MECH-MM NAME Stamko DeveloDment T.I.-DiDDina Dots DATE 8/24/2006 DESCRIPTION Designer Enforcement Equipment and Systems Efficiencies 0 §111 Any appliance for which there is a California standard established in the Appliance Efficiency Regulations will comply with the applicable standard. § 115(a) Fan type central furnaces shall not have a pilot light. F§ 123 Piping, except that conveying fluids at temperatures between 60 and 105 degrees Fahrenheit, or within HVAC equipment, shall be insulated in accordance with Standards Section 123. § 124 Air handling duct systems shall be installed and insulated in compliance with Sections 601, 603 and 604 of the Uniform Mechanical Code. Controls § 122(e) Each space conditioning system shall be installed with one of the following: FX] § 122(e)1A Each space conditioning system serving building types such as offices and manufacturing facilities (and all others not explicitly exempt from the requirements of Section 112 (d)) shall be installed with an automatic time switch with an accessible manual override that allows operation of the system during off -hours for up to 4 hours. The time switch shall be capable of programming different schedules for weekdays and weekends and have program backup capabilities that prevent the loss of the device's program and time setting for at least 10 hours if power is interrupted; or § 122(e)1 B An occupancy sensor to control the operating period of the system; or § 122(e)1C A 4 -hour timer that can be manually operated to control the operating period of the system. § 122(e)2 Each space conditioning system shall be installed with controls that temporarily restart and temporarily operate the system as required to maintain a setback heating and/or a setup cooling thermostat setpoint. § 122(g) Each space conditioning system serving multiple zones with a combined conditioned floor area more than 25,000 square feet shall be provided with isolation zones. Each zone: shall not exceed 25,000 square feet; shall be provided with isolation devices, such as valves or dampers, that allow the supply of heating or cooling to be setback or shut off independently of other isolation areas; and shall be controlled by a time control device as described above. ® § 122(a&b) Each space conditioning system shall be controlled by an individual thermostat that responds to temperature within the zone. Where used to control heating, the control shall be adjustable down to 55 degrees F or lower. For cooling, the control shall be adjustable up to 85 degrees F or higher. Where used for both heating and cooling, the control shall be capable of providing a deadband of at least 5 degrees F within which the supply of heating and cooling is shut off or reduced to a minimum. § 122(c) Thermostats shall have numeric setpoints in degrees Fahrenheit (F) and adjustable setpoint stops accessible only to authorized personnel. § 112(b) Heat pumps shall be installed with controls to prevent electric resistance 4 supplementary heater operation when the heating load can be met by the heat pump alone. EnergyPro By EnergySoft User Number: User Job Number: Page: 18 of 24 I __ MECHANICAL MANDATORY MEASURES Part 2 of 2 MECH-MM NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 Description Designer Enforcement Ventilation ❑X § 121(e) controls shall be provided to allow outside air dampers or devices to be operated at the ventilation rates as specified on these plans. X] § 122(f) Gravity or automatic dampers interlocked and closed on fan shutdown shall be provided on the outside air intakes and discharges of all space conditioning and exhaust systems. § 1440 All gravity ventilating systems shall be provided with automatic or readily accessible manually operated dampers in all openings to the outside, except for combustion air openings. R§ 121(f)1 Air Balancing: The system shall be balanced in accordance with the National Environmental Balancing Bureau (NEBB) Procedural Standards (1983), or Associated Air Balance Council (AABC) National Standards (1989); or ❑ § 121(f)2 Outside Air Certification: The system shall provide the minimum outside air as shown on the mechanical drawings, and shall be measured and certified by the Installing licensed C-20 mechanical contractor and certified by (1) the design mechanical engineer, (2) the installing licenced C-20 mechanical contractor, or (3) the person with overall responsibility for the design of the ventilation system; or X❑ § 121(f)3 Outside Air Measurement: The system shall be equipped with a calibrated local or remote device capable of measuring the quantity of outside air on a continuous basis and displaying that quantity on a readily accessible display divice; or X❑ § 121(f)4 Another method approved by the Commission. Service Water Heating Systems R§ 113(b)2 If a circulating hot water system is installed, it shall have a control capable of automatically turning off the circulating pump(s) when hot water is not required. X❑ § 113(b)3B Lavatories in restrooms of public facilities shall be equipped with controls to limit the outlet temperature to 110 degrees F. RX § 113(b)3C Lavatories in restrooms of public facilities shall be equipped with one of the following: Outlet devices that limit the flow of hot water to a maximum of 0.5 gallons per minute. Foot actuated control valves, and outlet devices that limit the flow of hot water to a maximum of 0.75 gallons per minute. Proximity sensor actuated control valves, and outlet devices that limit the flow of hot water to a maximum of 0.75 gallons per minute. Self-closing valves, and outlet devices that limit the flow of hot water to a maximum of 2.5 gallons per minute, and 0.25 gallons/cycle (circulating system). Self-closing valves, and outlet devices that limit the flow of hot water to a maximum of 2.5 gallons per minute, and 0.50 gallons/cycle (non -circulating system). Self-closing valves, and outlet devices that limit the flow of hot water to a maximum of 2.5 gallons per minute, and 0.75 gallons/cycle (foot switches and proximity sensor controls). EnergyPro By EnergySoft User Number: User Job Number: Page:19 of 24 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Stamko Development T.I.-Dipping Dots 8/24/2006 SYSTEM NAME FLOOR AREA HVAC -1 900 Number of Systems 1 Heating System Output per System 0 Total Output (Btuh) 0 Output (Btuh/sqft) 0.0 Cooling System Output per System 60,000 Total Output (Btuh) 60,000 Total Output (Tons) 5.0 Total Output (Btuh/sgft) 66.7 Total Output (sgft/Ton) 180.0 Air System CFM per System 2,000 Airflow (cfm) 2,000 Airflow (cfm/sqft) 2.22 Airflow (cfm/Ton) 400.0 Outside Air (%) 9.0 Outside Air (cfm/sgft) 0.20 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM ISensible Latent CFM I Sensible 1,945 29,353 4,390 495 20,804 0 1,468 1,040 0 0 180 7,147 2,010 180 8,335 0 0 1,4681 1,040 39143:5[=6 400 31 220 Carrier 50JX0605 40,262 13,673 0 Total Adjusted System Output 40,262 13,673 (Adjusted for Peak Design Conditions) 01 TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 65.6 OF 110.0 °F 110.0 OF Supply Air Ducts Outside Air 180 cfm 109.5 °F Heating Coil Supply Fan 2000 cfm ROOMS 69.5 OF 70.0 OF Return Air Ducts I 1000LING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Coolina Peakl 112.0 / 77.9 OF 78.0 / 65.7 OF 0 59.1 / 58.1 OF Outside Air 180 cfm Cooling Coil 74.7/64.3 °F 0 Supply Fan 2000 cfm 59.1 / 58.1 OF -� Supply Air Ducts 59.8 / 58.4 OF 58.7% R.H. ROOMS 74.0 / 64.0 OF h Return Air Ducts \1 EnergyPro 4.1 by Energysoft User Number: 6712 Job Number: Page: 20 of 24 ROOM LOAD SUMMARY EnergyPro By EnergySoft User Number: User Job Number: Page:21 of 24 PROJECT NAME Stamko Development T.I.-Dipping Dots DATE 8/24/2006 7 SYSTEM NAME HVAC -1 FLOOR AREA 900 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 5 Suite 5 1 1,945 29,353 4,390 1,945 29,353 4,390 495 20,804 ' PAGE TOTAL 1,945 29,353 4,390F 495 20,804 TOTAL 1 1,9451 29,353 4,390 495 20,804 EnergyPro By EnergySoft User Number: User Job Number: Page:21 of 24 ROOM HEATING PEAK LOADS ct Title mkn nPvPlnnmPnt Ti -ninninn fonts a/9nnF Room Information Desi n Conditions Room Name suite 5 Time of Peak Jan 12 am Floor Area 900 Outdoor Dry Bulb Temperature 26OF Indoor Dry Bulb Temperature 70 OF X x X X X X X X X X x X X X X X X X X X X x X x X X X X X x X X X x X X X X X X Conduction Area H -value AT oI= Rtri/hr • R-30 Roof R.30.2x10.24 surface Area 900.0 X X X X X X X X X X X X X X X X X X X X X X X x X X X X X X X X X x X X X X X X 0.0340 X x X X X X X X X X x X X X X X X X X X X x X x X X X X X x X X X x X X X X X X 44 = = = = = = = = = = = = = = = = = = 1,346 R-19 Wall .19.24.16 120.0 0.0740 44 391 Double Metal Tent 30.0 0.7200 44 950 Double Metal Tint 24.0 0.7200 44 760 6.0 0.7200 44 190 R-11 Partition Wall .11.2x4 16 720.0 0.1100 44 3,485 R-19Wall (W.19,24,16) 159.0 0.0740 44 518 Metal Door 21.0 0.7000 44 647 R-1 1 Parfitaon Wall ON 11 Px4 1 F;) 720.0 0,1100 44 3,485 Slab -On -Grade perimeter= 150.0 0.7300 4,818 Items shown with an asterisk (`) denote conduction through an interior Infiltration: r 1.001 X 1.064 X schedule Air Sensible Fraction to another room. 900 X 12.00 Ceiling Height 0.500 / 6 ] ACH Page Total: ® OT 16 590 4 214 TOTAL HOURLY HEAT LOSS FOR ROOM 20,804 EnergyPro 4.1 by EnergySoft User Number: 6712 Job Number: Page: 22 of 24 ROOM COOLING PEAK LOADS Project Title Date Stamko Development T.I.-Dipping Dots 8/24/2006 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 5 Time of Peak Jul 3 pm Floor Area 900 Outdoor Dry Bulb Temperature 112 OF Indoor Dry Bulb Temperature 74`F Outdoor Wet Bulb Temperature 78 OF Conduction -30 Roof R.30.2x10.24 -19 Wall W.19.2x6.16 Double Metal Tint Double Metal Tint -11 Partition Wall W.11.2x4.16 -19 Wall .19.2x6.16 Metal Door -11 Partition Wall W.11.2x4.16 Area 1 900.01 21.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value X 0.0340 X 0.0740 X 0.7200 X 0.7200 X 0.1100 X 0.0740 X 0.7000 X 0.1100' X 0:832 DETD 1 X X X X X X X X X 72.5 = = = = = = = = = 56.8 27.1 27.1 39.5 45.6 39.1 57.6 30.0 Page Total Orientation Area X X X X x X X X X x SGF X X X X X x X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = = = U 30.0 41 0.657 0.832 (N) 24.0 41 0.657 0:832 (N) 6.0 41 0.657 0.832 Page Total Btu/hr 2,218 504 586 586 3,126 537 575 4,560 12 691 Btu/hr 672 538 134 1 344 Sched. Weighting Btu/hr Internal Gain Frac. Area Heat Gain Factor i hts 1.0 X 900 X 1.584 Watts/sqft X 3.41 Btuh/Watt x 0.999 = 4,862 ccu ants 1.0 X 900 x 300 Btuh/OCC. / 10 sgft/OCc. x 1.00 = 2,700 Receptacle 11.0c X 900 x 1.340 Watts/sgft x 3.41 Btuh/Watt x 1.00 = 4,116 rocess 1.0 x 900 x 0.000 Watts/sgft x 3.41 Btuh/Watt x 1.00 = 0 Infiltration: 1.00 X 1.064 X 900 X 12.00 X 0.50 / 6] X 38 = 3 640 Schedule Air Sensible Area Ceiling Height ACH &T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 29,353 Sched. Latent Gain Frac. Area Heat Gain Btu/hr Occupants 1.00 X 900 x 3001 Btuh/OCC. / 100 sgftlocc. = 2 700 Receptacle 1.00 x x a on Watts/sgft x 3 4131 Btuh/Watt = Process 1.00 x soo x 0.000 Watts/sgft x 3.4131 Btuh/Watt = o Infiltration: x 4 771 x x x / 60] x_ chedule Air Latent Area Ceiling Height ACH pyy TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 437901 EnergyPro By EnergySoft User Number: User Page:23 of 24 ROOM COOLING COIL LOADS Project Title Date Stamko Development T.I.-Dipping Dots 8/24/2006 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 5 Time of Peak Jul 3 pm Floor Area 900 Outdoor Dry Bulb Temperature 112 9F Indoor Dry Bulb Temperature 74`F Outdoor Wet Bulb Temperature 78 OF Conduction -30 Roof (R.30.2x10.24 19 Wall W.19.2x6.16 Double Metal Tint Double Metal Tint -11 Partition Wall .11.2x4.16 -19 Wall W.19.24.16 Metal Door -11 Partition Wall W.11.2x4.16 Area 1 120.01 21 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value X 0.0340 X 0.0740 X 0.7200 X 0.7200 X 0.1100 X 0.0740 X 0.7000 X 0.1100 X 0.832 DETD 1 X X X X X X X X X 72.5 = = = = = = = = = 56.8 27.1 27.1 39.5 45.6 39.1 57.6 30.0 Page Total Orientation Area X X X X X X x X X X SGF x X X x x X X X X X Sc Weighting X X X X x x X X X x Factor = = = = = = = = = (N) 30.0 41 0.657 0.832 (N) 24.0 41 0.657 0.832 (N) 6.0 41 0.657 0.832 Page Total Btu/hr 2,218 504 586 586 3,126 537 575 4.560 12 691 Btu/hr 672 538 134 1344 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0 x 900 X 1.584 Watts/sqft x 3.41 Btuh/Watt X 0.999 = 4,862 ccu ants 1.0 x 900 x 300 Btuh/occ. / 10 sqft/occ. X 1.00 = 2,700 Receptacle 1.0 x 900 X 1.340 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 4,116 rocess 1.0c x 900 x 0.000 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 0 Infiltration: 1.00 x 1.064 x 900 x 12.00 x 0.50 / 60] x 38 = 1 3,6401 -Schedule Air Sensible Area Ceiling Height ACH Z�,T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 29,353 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 x 900 x 3001 Btuh/OCC. / 100 sgft/occ. = 2 700 Receptacle 1.00 x x 0 000 Watts/sgft x i 41a I Btuh/Watt = Process 1.00 x 900 X 0.000 Watts/sqft x 3.413 Btuh[Watt = o • Infiltration: x x x Ceiling Height x ACH � / 6] x _ 1 1'640J chedule Air Latent Area pyy TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 4 390 EnergyPro By EnergySoft User Number: User Page:24 of 24