Loading...
11-1192 (RC)4 P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Application Number: C71-00001192- Owner: Property Address: 79630 -HIGHWAY 111 STE 101 GR DUNES APN: 649-020-014-1 -31143 - Property Zoning: REGIONAL COMMERCIAL Application valuation: 30000 Contractor: Applicant: Architect or Engineer: J N P CONSTRUCTION SERVI 73255 SHADOW MOUNTAIN PALM DESERT, CA 92260 ^ (760) 404-2891 rX Lica No.: 925797 _ w - LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Busin and Professionals Code, and my License is in full force and effect. License Class: B Licen a No.: 925797 Date: I2 Z2111( tyeFtractor• OWNER -BUILDER CLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044; Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_) I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY 1 hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: L.QPERMIT VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 12/22/11 WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 0032051-2011 _ I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I s luld become subject to the workers' compensation provisions of Section 3700 of the Labor C He, I shallJprthw'th�`"ply with those provisions. ,ea ��� k l l t-lCc I C. ate: Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATI COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND Cl FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000)• IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a,permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating.to btaijding construction, and ¢e eby authorize representatives ofate-'.sl this co my to enter upon the above-mentioned prope�i{{y for in purpoyte Date: r_��{' I' S' ature (Applicant or Agent): Q/ �I2e Application Number . . . . . 11-00001192 ------ Structure Information 1,650SF TI/VB/B-OCC/16-OL/SPRINKLED ----- Other struct info . . . . . CODE EDITION 2010 FIRE SPRINKLERS FULLY MIXED -USE -OCCUPANCY B OCCUPANT LOAD 16.00 ---------------------------------------------------------------------------- 1ST FLOOR SQUARE FOOTAGE 1650.00 Permit . . . BUILDING PERMIT - ADA INV FEE Additional desc . Permit Fee. . . . . 569.00 Plan Check Fee 184.93 Issue Date . . . . Valuation . . . . 30000 Expiration Date 6/19/12 Qty Unit Charge Per Extension BASE FEE 504.00 5.00 ---------------------------------------------------------------------------- 13.0000 THOU BLDG 25,001-50,000 65.00 Permit . . . ELEC-NEW COMMERCIAL Additional desc . Permit Fee . . . . 48.00 Plan Check Fee 12.00 Issue Date . . . . Valuation . . . . 0 Expiration Date •:6/19/12 Qty Unit Charge Per Extension BASE FEE 15.00 1650.00 ------=------------------------------------------------------------'--------- .0200. .ELEC GARAGE OR NON-RESIDENTIAL 33.00' Permit MECHANICAL Additional desc . Permit Fee . . . . 19.50 Plan Check Fee 4.88 Issue Date . . . . Valuation . . 0 Expiration Date 6/19/12 Qty Unit Charge Per Extension BASE FEE 15.00 1.00 4.5000 EA MECH VENT INST/ DUCT ALT 4.50 ---------------------------------------------------------------------------- Special Notes and Comments 1,650SF OFFICE TI/VB/B-OCC/16-OL/FULLY SPRINKLED [FOOTLOOSE -REFLEXOLOGY] THIS PERMIT DOES -NOT INCLUDE ALTERATIONS TO THE'BUILDING SHELL OR THE PLUMBING - SYSTEM, OR EXTERIOR SIGNAGE. OCCUPANCY SEPARATION PER 508.3 - NON SEPARATED LQPERMIT LQPERMIT Application Number . . . . . 11-00001192 ----------------------------------------------7----------------------------- Special Notes and Comments OCCUPANCIES. ***INVESTIGATION FEE ASSESSED PER 2010 CALIFORNIA BUILDING CODE CHAPTER 1 §108.6 FOR WORK COMMENCING BEFORE PERMIT ISSUANCE*** 2010 CALIFORNIA BUILDING CODES. December 19, 2011 2:31:25 PM AORTEGA ---------------------------------------------------------------------------- Other Fees . . . . . . . . ACCESSIBILITY PLAN REVIEW 18.50 BLDG STDS ADMIN (SB1473) 2.00 ENERGY REVIEW FEE 18.50 Fee summary Charged Paid ------------------------------ Credited ---------- Due ----------------- Permit Fee Total 636.50 .00 .00 636.50 Plan Check Total 201.81 .00 .00 201.81 Other Fee Total 39.00 .00 .00 39.00 Grand Total 877.31 .00 .00 877.31 Bin # City of La Quinta Building &Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 ' Building Permit Application and Tracking Sheet Permit # nn Project Address: r7 9 % 1 .10 j. Owner's Name: A. P. Number: Address: Legal Description: City, ST, Zip: Contractor: eo �� Telephone: Address: '70626-5 6hadow r ► I Project Description: City, ST, Zip: O M oe6 Telephone: 7Zoo Lo U State Lie. # : U1 Z rj � 7 City Lie. #c Arch., Engr., Designer: Address: City, ST, Zip: Telephone: O i'<'::.::. g g> ::>.; :.:u•.. :3:>g; ::�•O.?vV:.??:U/..:f::"'9....w:.ln9Y.•h "fi: ^3>%?•;cr `f "" :#<:„: ;� Construction Type: Occupancy: State Lie. #:rl;;<:>";«:>::>:•:«.::;.;:,:.:.�:;:,,,:�;;: Project type (circle one): New Add'n Alter Repair Demo Name of Contact Person: V U n 8) ue Dr n Sq. FL: #Stories: T# Units: Telephone # of Contact Person: "7&o 1vo I D t0 5 Estimated Value of Project: $ 3 D ODD`” APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Recd TRACKING PERMTI• FEES Plan Sets Plan Check submitted Item Amount Structural Calcs.Reviewed, ready for corrections 11 �1 Y"I �t Plan Check Deposit �+ Truss C21cs. Called Contact Person k n [I Plan Check Balance. Title 24 Calcs. a Plans picked up � � ( +� Construction 1101. fe Flood plain plan Plans resubmitted �� Mechanical i,. -- Grading plan2"' Review, ready for correction ssu Electrical �. Subcontactor List Called Contact Person Plumbing Grant Deed Plans picked up H.O.A. Approval Plans resubmitted Grading �+ IN HOUSE:- 7rd Review, ready for corrections/issue Developer Impact Fee ..... Planning Approval Called Contact Person ,I.P,P, �. Pub. Wks. Appr Date of permit issue Sim 't-40 School Fees Total Permit Fees I rn, a 11(2 � yew- P.O.Box 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT (760) 777-7012 FAX (760) 777-7,01 1 SII n To: Greg Butler, Building & Safety Manager To CDD: i From: Les Johnson,, Director -Planning Due Date: if Permit #: Status: Building Flans Approval (This is an approval to issue a Building Permit) The Planning Department has reviewed the Building Plans for the following project: Description: -T �p :cam �j Address or General Location: Applicant Contact The Planning Department finds that: O ...these Building Plans do not require Planning Department approval.. ...these Building Plans area roved b the Planning* Department. " PP Y g .0 ...these Building Plans require corrections. Please forward a copy of the j attached corrections to the applicant: When the corrections are made Please return them to the Planning Department for review. Les Johnson, D' ector-Planning Date i received., Nov x f t j; City of 1,0 QJ01ta Plwning DeparPrrtent # I E PROUDLY S RUING THE UNINCORPO TED AREA£ OF RIVERSI COUNTY AND THE CIT ES OF: BANNING BEAUMONT CAU M ESA CANYON LA COACHELLA DESERT HO SParmr-c EASTVALE INDIAN WELL INDIO JURUPA VAI LAKE ELSINO LA QUINTA MENIFEE MORENO VAL. PALM DESEM PERRIS RANCHO MIRE RUBIDOUx CS SAN JACINTO TEMECULA W I LOOMAR BOARD OF SUPERVISO . BOB BUSTER DI ICT 1 JOHN TAVAGLI NE DISTI ICT 2 JEFF STONE DisTF ICT 3 JOHN BENOIT DIST ICT4 MARION ASH ��5 RIVmsioE` COU FIRE DEp.I�R'T11+�tE�'T IN COOPERATION WITH THE CALIFORNIA DEPARTMENT OF FORESTRY AND FIRE PROTECTION John R. Hawkins Fire Chief 210 West San Jacinto Avenue - Perris, CA 92570 (951) 940-6900-www.rvefiire.org December 5, 2011 RE: TENANT IMPROVEMENT PLAN CHECK -Non Structural RE -DESIGN LAQ-1 I -TI -041 Footloose Reflexolgy 79-630 Hwy 111 #101 You have been issued a release for a tenant improvement on an existing building. THIS IS NOT AN OCCUPANCY PERMIT. It is prohibited to use/process or store any materials in this occupancy that would classify it as an "H" occupancy per Sec. 307 of the 2010 CBC. THE FOLLOWING CONDITIONS MUST BE MET PRIOR TO INSPECTION: Install door hardware and exit signs as per Chapter 10 of the 2010 CBC. A minimum 2A] 013C Fire Extinguisher, (State Fire Marshal Approved) must be mounted in'a visible location within 75' walking distance from any point in your building or suite. Fire extinguishers can be installed by a licensed extinguisher company with a State Fire Marshal service tag attached to the extinguisher, or purchased from a retail store with a sales receipt attached. A licensed fire extinguisher company must service extinguisher yearly. All breakers must be labeled and a clearance of 36 inches must be maintained around the panel at all times. Approved suite addresses shall be placed in such a position to be plainly visible and legible from the street. Said numbers shall contrast with their background. An approved audible interior notification alarm device shall be provided in approved location. A C-10 licensed contractor must submit plans, designed in accordance with NFPA 72 to the Fire Department for review -and approval prior to installation A durable sign stating "This door to remain unlocked during business hours" shall be placed on or adjacent to the front exit door. The sign shall be in letters not less than one inch high on a contrasting background. Provide key(s) to the tenant space for inclusion in the main building Knox Box. Key(s) shall have durable and legible tags affixed for identification of the correlating tenant space.. Key(s) shall be provided at time of final inspection. As may be necessary to maintain proper fire sprinkler protection due to constructions changes, fire sprinkler system plans for the tenant improvement area maybe required to be submitted to the Fire Department for review, L'd LLZ9-0VE(09L) N011cnJiSN00 dNf d96:E0 LL 9L oea Z•d Applicant/installer shall be responsible to contact the Fire Department to schedule inspections. A re -inspection fee will be required if more than one (1) inspection is necessary. Requests for inspections are to be made at least 72 hours in advance and may be arrange 863-8886. d by calling (760) All questions regarding the meaning of these conditions should be referred to the Fire Department Planning & Engineering Staff at (760) 863-8886. Sincerely, By: Jaso Stubble Fire Safety Specialist Noiion�USNOO dNf d61:£0 6l 96 oaa I. BUILDING ENERGY ANALYSIS REPORT P�c�� smw to,�..pu�r eta PROJECT: Footloose Reflexology 73-255 Shadow Mountain Palm Desert, CA Project Designer: efiga 114 CITY OF LA QUINTA BUILDING & SAFETY DEPT. : APPROVED FOR CONSTRUCTION oATE'111 1� _jOLA Report Prepared by: Joan D. Hacker " Insu-form, Inc. 77-810 Las Montanas Road, Suite 201 Palm Desert, Ca 92211 7607345-1-3.52 Li NOV p 9 2011 �,� i Job Number: Date: i 10/31/2011 F The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC — www.energysoft.com. EnergyPro 5 1 by EnergySoft User Number 2655 RunCode: 2011-10-31T16:49:56 ID: TABLE OF CONTENTS Cover Page 1 Table of Contents 2 Form LTG -1-C Certificate of Compliance 3 ,.Form LTG -3-C Indoor Lighting Power Allowance 7 Form LTG -MM Lighting Mandatory Measures 8 Form MECH-1-C Certificate of Compliance 9 Form MECH-2-C Air & Water System Requirements 14 Form MECH-3-C Mechanical Ventilation 16 Form MECH-4-C HVAC Misc. Prescriptive Requirements 17 Form MECH-MM Mechanical Mandatory Measures 18 HVAC System Heating and Cooling Loads Summary 19 EnergyPro 5.1 by Energysoft Job Number: ID: User Number: 2655 CERTIFICATE OF COMPLIANCE (Part 1 of 4) LTG -1 C Project Name Footloose Reflexology Date 1 10/31/2011 Project Address 73-255 Shadow Mountain Palm Desert Climate Zone 15 Total Cond. Floor Area 1,650 Unconditioned Floor Area 0 GENERAL INFORMATION Building Type: 10 Nonresidential ❑ High -Rise Residential ❑ Hotel/Motel Guest Room ❑ School ❑ Relocatable Public p Conditioned Spaces ❑ Unconditioned Spaces School Phase of Construction: ❑ New Construction ❑ Addition 12 Alteration Method of Compliance: ❑ Complete Building m Area Category ❑ Tailored Documentation Author's Declaration Statement I certify that this Certificate of Compliance documentation is accurate and complete. Signatu Name Joan D. Hacker Company I Insu-form, Inc. Date 1 0/3 12 0 1 1 Address 77-810 Las Montanas Road, Suite 201 CEA # CEPE # City/State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 .The Principal Lighting Designer's Declaration Statement • 1 am eligible under Division 3 of the California Business and Professional Code to accept responsibility for the lighting design. • This Certificate of Compliance identifies the lighting features and performance specifications required for compliance with Title 24, Pages 1 and 6 of the California Code of Regulations. • The design features represented on this Certificate of Compliance are consistent with the information provided to document this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. Name Signature Company Phone Address. License # City/State/Zip Date Lighting Mandatory Measures Indicate location on building plans of Mandatory Measures Note Block: LIGHTING COMPLIANCE FORMS & WORKSHEETS check box if worksheets is included For detailed instructions on the use of this and all Energy Efficiency Standards compliance forms; please refer to the Nonresidential Manual published by the California Energy Commission. ❑✓ LTG -1C Pages 1 through 4 Certificate of Compliance. All Pages required on plans for all submittals. ❑✓ LTG -2C Lighting Controls Credit Worksheet LTG -3C Indoor Lighting Power Allowance ❑✓ LTG -4C Pages 1 through 4 Tailored Method Worksheet ❑ LTG -5C Pages 1 and 2 Line Voltage Track Lighting Worksheet EnergyPro 5.1 by EnergySoft User Number. 2655 RunCode: 2011-10-31716:49:56 to: Page 3 of 19 CERTIFICATE OF COMPLIANCE (Part 2 of 4) LTG -1 C Project Name Footloose Reflexology Date 1 10/31/2011 INDOOR LIGHTING SCHEDULE and FIELD INSPECTION ENERGY CHECKLIST Installation Certificate, LTG -1- INST (Retain a copy and verify form is completed and signed.) Field Inspector ❑ Certificate of Acceptance, LTG -2A and LTG -3A (Retain a copy and verify form is completed and signed.) Field Inspector ❑ A separate Lighting Schedule Must Be Filled Out for Conditioned and Unconditioned Spaces Installed Lighting Power listed on this Lighting Schedule is only for: 0 CONDITIONED SPACE ❑ UNCONDITIONED SPACE 0 The actual indoor lighting power listed below includes all installed permanent and portable lighting systems in accordance with §146(a). Only for offices: Up to the first 0.2 watts per square foot of portable lighting shall not be required to be included in the ® calculation of actual indoor lighting power density in accordance with the Exception to §146(a). All portable lighting in excess of 0.2 watts per square foot is totaled below. Luminaire (Type, Lamps, Ballasts Installed Watts A B C D E F I G H None or Item Ta Complete Luminaire Description' (i.e, 3 lamp fluorescent troffer, F32T8, one dimmable electronic ballasts N fl-�m ;n 3 D How wattage Was determined (n O N � •� E E Z J LL X -00 v = c Field Ins ector2 a� 6 01 " CEC � r�i Default o From Q �o NA8 a t JL 75w Wall Mount Incandescent 75.0 21 ❑ 12 900 ❑ ❑ (4) 4 If Fluorescent T8 Energy Savings Elec 104.0 ❑ 8 832 ❑ ❑ ❑ ❑ ❑ 0 ❑ Cl ❑- ❑ ❑ ❑ ❑ ❑.; ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ El ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ... ❑ ❑ ❑ ❑ ❑ ❑ ❑ a ❑ ❑ ❑ ❑ Installed Watts Page Total: L732 Building total number of pages: Installed Watts Building Total Sum of all pages) 1'732 Enter into LTG -1C Page 4 of 4 1. Wattage shall be determined according to Section 130 (d and e). Wattage shall be rating of light fixture, not rating of bulb. 2. If Fail then describe on Page 2 of the Inspection Checklist Form and take appropriate action to correct. Verify building plans if necessary. EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-10-31716:49:56 ID: Page 4 of 19 CERTIFICATE OF COMPLIANCE (Part 3 of 4) LTG -1 C Project Name Footloose Reflexology Date 10/31/2011 INDOOR LIGHTING SCHEDULE and FIELD INSPECTION ENERGY CHECKLIST Fill in controls for all spaces: a) area controls, b) multi-level controls, c) manual daylighting controls for daylit areas > 250 ftz, automatic daylighting controls for daylit areas > 2,500 fe, d) shut-off controls, e) display lighting controls, f) tailored lighting controls — general lighting controlled separately from display, ornamental and display case lighting and g) demand responsive automatic controls for retail stores > 50,000 ft2, in accordance with Section 131. MANDATORY LIGHTING CONTROLS — FIELD INSPECTION ENERGY CHECKLIST Number Special Type/ Description of Units Location in Building Features Shut -Off Controls ❑ In addition to the manual ❑ controls installed to comiply ❑ -for every EiGor, all ind-nor El equipped with se-parate automZltic controiS Lo shut ott the iightning. ❑ This automatic controls ❑ shall meet the requirements ❑ of Section 119 and may be an ❑ occupant sensor, automatic ❑ light switch. or other 0 the lightning. Exception 0 i. 11❑ trie 11grTnIng system is serving and area that must ❑ be continuously lit. 24 Hrs. ❑ per day/365 days per year. ❑ SPECIAL FEATURES INSPECTION CHECKLIST See Page 2 of 4 of LTG -1C The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. Field Inspector's Notes or Discrepancies: Ener Pro 5.1 by Ener Soft User Number: 2655 RunCode: 2011-10-31 T16:49:56 ID: Page 5 of 19 CERTIFICATE QF COMPLIANCE Part 4 of 4 MAC Project Name Date Footloose Reflexology 10/31/2011 CONDITIONED AND UNCONDITIONED SPACE LIGHTING MUST NOT BE COMBINED FOR COMPLIANCE Indoor Lighting Power for Conditioned S aces Indoor Lighting Power for Unconditioned Spaces Watts Watts Installed Lighting 1,732 Installed Lighting 0 from Conditioned LTG -1C, Page 2 from Unconditioned LTG -1C, Page 2 Lighting Control Credit _ 0 Lighting Control Credit _ 0 Conditioned Spaces from LTG -2C Unconditioned Spaces from LTG -2C Adjusted Installed = 1 732 Adjusted Installed = 0 Li_qhtinq Power Lighting Power Complies if Installed <_ Allowed Complies if Installed 5 Allowed Allowed Lighting Power 1,980 Allowed Lighting Power Conditioned Spaces from LTG -3C or PERF -1 Unconditioned Spaces from LTG -3C)0 Required Acceptance Tests Designer: This form is to be used by the designer and attached to the plans. Listed below is the acceptance test for the Lighting system, LTG -2A and LTG -3A. The designer is required to check the acceptance tests and list all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. If all the lighting system or control of a certain type requires a test, list the different lighting and the number of systems. The NA7 Section in the Appendix of the Nonresidential Reference Appendices Manual describes the test. Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Forms can be grouped by type of Luminaire controlled. Enforcement Agency: Systems Acceptance. Before Occupancy Permit is granted for a newly constructed building or space or when ever new lighting system with controls is installed in the building or space shall be certified as meeting the Acceptance Requirements. The LTG -2A and LTG -3A forms are not considered complete forms and are not to be accepted by the enforcement agency unless the boxes are checked and/or filled and signed. In addition, a Certificate of Acceptance forms shall be submitted to the enforcement agency that certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of §10-103(b) of Title 24 Part 6. The field inspector must receive the properly filled out and signed forms before the building can receive final occupancy. A copy of the LTG -2A and LTG -3A for each different lighting luminaire control(s) must be provided to the owner of the building for their records. LTG -2A and Luminaires Controlled LTG -3A Controls and Sensors and Number of Automatic Luminaires Daylighting Controls Equipment Re uirin Testing Description controlled Location Acceptance El 13 13 Ener Pro 5.1 by EnergySoh User Number: 2655 RunCode: 2011-10-31T16:49:56 /D: Page 6 of 19 C INDOOR LIGHTING POWER ALLOWANCE LTG -3C Project Name Footloose Reflexology Date 10/31/2011 ALLOWED LIGHTING POWER Chose One Method A Separate LTG -3C must be filled out for Conditioned and Unconditioned Spaces. Indoor Lighting Power Allowances listed on this page are only for: IH CONDITIONED SPACES ❑ UNCONDITIONED SPACES COMPLETE BUILDING METHOD WATTS BUILDING CATEGORY From §146 Table 146-E PER(ft) X COMPLETE BLDG. AREA = ALLOWED WATTS l . 1 c I iri TOTALS AREA WATTS EA CATEGORY METHO WATTS BUILDING CAT GORY From §146 Table 146-F PER ft2 Area ft2 = ALLOWED WATTS Medical and Clinical Can: 0 1,650 1 8 VL4 V1 -rAsw kq1A -v • G TOTALS 1,650 1,980 AREA WATTS TAILORED METHOD Total Allowed Watts using the Tailored Method taken from LTG -4C Pae 1 of 4 Row 3 0 The indoor lighting power allowance using the Tailored Method of compliance shall be determined using the LTG -4C set of forms. A separate set of LTG - 4C forms shall be filled out for CONDITIONED and UNCONDITIONED spaces Ene Pro 5.1 b Ene Soft User Number.' 2655 RunCode: 2011-10-31T16:49:56 ID: Pa e 7 of 19 LIGHTING MANDATORY MEASURES: NONRESIDENTIAL LTG -MM Project Name Date Footloose Reflexology 10/31/2011 Indoor Lighting Measures: §131(d): Shut-off Controls For every floor, all interior lighting systems shall be equipped with a separate automatic control to shut off the lighting. 1. This automatic control shall meet the requirements of Section 119 and may be an occupancy sensor, automatic time switch, or other device capable of automatically shutting off the lighting. Override for Building Lighting Shut-off: The automatic building shut-off system is provided with a manual, accessible 2 override switch in sight of the lights. The area of override is not to exceed 5,000 square feet. §119(h): Automatic Control Devices Certified: All automatic control devices specified are certified, all alternate equipment shall be certified and installed as directed by the manufacturer. Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the project are certified and listed in the §111: Directory. All installed fixtures shall be certified. §131(a): Individual Room/Area Controls: Each room and area in this building is equipped with a separate switch or occupancy sensor device for each area with floor -to -ceiling walls. Uniform Reduction for Individual Rooms: All rooms and areas greater than 100 square feet and more than 0.8 watts §131(b): per square foot of lighting load shall be controlled with bi-level switching for uniform reduction of lighting within the room. Daylight Area Control: All rooms with windows and skylights that are greater than 250 square feet and that allow for the effective use of daylight in the area shall have 50% of the lamps in each daylit area controlled by a separate switch; §131(c): or the effective use of daylight cannot be accomplished because the windows are continuously shaded by a building on the ad'acent lot. Diagram of shading during different times of the year is included on plans. §131(c): Display Lighting. Display lighting shall be separately switched on circuits that are 20 amps or less.6. Outdoor Lighting Measures: §130(c)1: Mandatory lighting power determination for medium base sockets without permanently installed ballasts All permanently installed luminaires with lamps rated over 100 Watts either have a lamp efficacy of at least 60 lumens §132(a): per Watt or are controlled by a motion sensor. All Luminaires with lamps rated greater than 175 Watts in hardscape area, including parking lots, building entrances, §132(b): canopies, and all outdoor sales areas meet the Cutoff Requirements. §132(c)1: All permanently installed outdoor lighting meets the control requirements listed. Building facades, parking lots, garages, canopies, and outdoor sales areas meet the Multi -Level Lighting Requirements §132(c): listed. EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-10-31T16:49:56 ID: Page 8 of 19 CERTIFICATE OF COMPLIANCE and (Part 1 of 5) MECH-1 C FIELD INSPECTION ENERGY CHECKLIST Project Name Footloose Reflexology Date 10/31/2011 Project Address 73-255 Shadow Mountain Palm Desert Climate Zone 15 Total Cond. Floor Area 1,650 Addition Floor Area 0 GENERAL INFORMATION Buildin Type: 0 Nonresidential ❑ High-Rise Residential ❑ Hotel/Motel Guest Room ❑ Schools (Public School) ❑ Relocatable Public School Bldg. 0 Conditioned Spaces ❑ Unconditioned Spaces affidavit Phase of Construction: ❑ New Construction ❑ Addition 10 Alteration Approach of Compliance: ❑ Component ❑ Overall Envelope TDV ❑ Unconditioned (file affidavit) Energy Front Orientation: N, E, S, W or in Degrees: 0 deg HVAC SYSTEM DETAILS FIELD INSPECTION ENERGY CHECKLIST E ui ment2 Inspection Criteria Meets Criteria or Requirements Pass Fail — Describe Reason Item or System Tags i.e. AC-1, RTU-1 HP-1 DHW Heater ❑ ❑ Equipment T e3: Gas Fired DHW Boiler ❑ ❑ Number of Systems 1 ❑ ❑ Max Allowed Heating Capacity' 40, 000 Btu/hr ❑ ❑ Minimum Heating Efficiency' 0.53 EF ❑ ❑ Max Allowed Cooling Capacity' n/a ❑ ❑ Cooling Efficiency' n1a ❑ ❑ Duct Location/ R-Value n/a ❑ ❑ When duct testing is required, submit MECH-4A & MECH-4-HERS n/a ❑ ❑ Economizer n/a ❑ ❑ Thermostat n/a ❑ ❑ Fan Control n/a ❑ ❑ E ui ment2 Inspection Criteria FIELD INSPECTION ENERGY CHECKLIST Pass Fail — Describe Reason Item or System Tags i.e. AC-1, RTU-1, HP-1 Footloose ❑ ❑ Equipment T e3: Packaged DX ❑ ❑ Number of Systems 1 ❑ ❑ Max Allowed Heating Capacity' 22,539 Btu/hr ❑ ❑ Minimum Heating Efficiency' 3.40 COP ❑ ❑ Max Allowed Cooling Capacity' 58,120 Btu/hr ❑ ❑ Cooling Efficiency' 10.5 EER ❑ ❑ Duct Location/ R-Value n/a ❑ ❑ When duct testing is required, submit MECH-4A & MECH-4-HERS No ❑ ❑ Economizer No Economizer ❑ ❑ Thermostat Setback Required ❑ ❑ Fan Control Constant Volume ❑ ❑ 1. If the Actual installed equipment performance efficiency and capacity is less than the Proposed (from the energy compliance submittal or from the building plans) the responsible party shall resubmit energy compliance to include the new changes. 2. For additional detailed discrepancy use Page 2 of the Inspection Checklist Form. Compliance fails if a Fail box is checked. 3. Indicate Equipment Type: Gas (Pkg or, Split), VAV, HP (Pkg or split), Hydronic, PTAC, or other. Ener Pro 5.1 by EnergySoft User Number. 2655 Run Code: 2011-10-31T16:49:56 ID: Page 9 of 19 CERTIFICATE OF COMPLIANCE and (Part 2 of 5) MECH-1 C FIELD INSPECTION ENERGY CHECKLIST Project Name Date Footloose Reflexology 10/31/2011 Disc EnergyPro 5 1 by EnergySoft User Number. 2655 RunCode: 2011-10-31T16:49:56 ID: Page 10 of 19 CERTIFICATE OF COMPLIANCE and FIELD INSPECTION ENERGY CHECKLIST (Part 3 of 5) MECH-1C Project Name Date Footloose Reflexology 10/31/2011 Required Acceptance Tests Designer: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to check the applicable boxes by all acceptance tests that apply and listed all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems. The NA number designates the Section in the Appendix of the Nonresidential Reference Appendices Manual that describes the test. Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Systems Acceptance: Before occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. Systems Acceptance: Before occupancy permit is granted. All newly installed HVAC equipment must be tested using the Acceptance Requirements. The MECH-1 C form is not considered a completed form and is not to be accepted by the building department unless the correct boxes are checked. The equipment requiring testing, person performing the test (Example: HVAC installer, TAB contractor, controls contractor, PE in charge of project) and what Acceptance test must be conducted. The following checked -off forms are required for ALL newly installed equipment. In addition a Certificate of Acceptance forms shall be submitted to the building department that certifies plans, specifications, installation, certificates, and operating and maintenance information meet the requirements of §10-103(b) and Title -24 Part 6. The building inspector must receive the properly filled out and signed forms before the building can receive final occupancy. TEST DESCRIPTION MECH-2A MECH-3A MECH-4A MECH-5A MECH-6A MECH-7A MECH-8A MECH-9A MECH-10A MECH-11A Hydronic Outdoor Constant Demand Supply System Automatic Ventilation Volume & Air Control Supply Valve Water Variable Demand For Single -Zone Distribution Economizer Ventilation Fan Leakage Temp. Flow Shed Equipment Re uirin Testing or Verification Oty. VAV & CAV Unitary Ducts Controls DCV VAV Test Reset Control Control Carrier 50HJQ007 1 ❑ ❑ ❑ ❑ ❑ ❑ Cl ❑ 2 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ Ene Pro 5.1 b Ene Soft User Number: 2655 RunCode: 2011-10-31T16:49:56 /D: Pae 11 of 19 CERTIFICATE OF COMPLIANCE and FIELD INSPECTION ENERGY CHECKLIST (Part 4 of 5) MECH-1 C Project Name Footloose Reflexology Date 10/31/2011 TEST DESCRIPTION MECH-12A MECH-13A MECH-14A MECH-15A Equipment Re uirin Testing Fault Detection & Diagnostics Q ty. for DX Units Automatic Fault Detection & Diagnostics for Air & Zone Distributed Energy Storage . DX AC Systems Thermal Energy Storage (TES) Systems Test Performed By: Carrier 50HJQ007. 1 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ EnergyPro 5.1 by Ener Soft User Number: 2655 Run Code: 2011-10-31T16:49:56 /D: Pae 12 of 19 CERTIFICATE OF COMPLIANCE Part 5 of 5 MECH-1 C Project Name Date Footloose Reflexology 10/31/2011 Documentation Author's Declaration Statement I certify that this Certificate of Compliance documentation is accurate and complete. Signature Name Joan D. Hacker Company Insu-form, Inc. Date 0/31/2011 Address CEA # 77-810 Las Montanas Road, Suite 201 CEPE # City/State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 The Principal Mechanical Designer's Declaration Statement • I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the mechanical design. • This Certificate of Compliance identifies the mechanical features and performance specifications required for compliance with Title -24, Parts 1 and 6 of the California Code of Regulations. • The design features represented on this Certificate of Compliance are consistent with the information provided to document this design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application. Name Signature Company Date Address License # City/State/Zip Phone Mandatory Measures Indicate location on building plans of Note Block for Mandatory Measures MECHANICAL COMPLIANCE FORMS & WORKSHEETS (check box if worksheet is included) For detailed instructions on the use of this and all Energy Efficiency Standards compliance forms, please refer to the 2008 Nonresidential Manual. Note: The Enforcement Agency may require all forms to be incorporated onto the building plans. © MECH-1 C Certificate of Compliance. Required on plans for all submittals. ® MECH-2C Mechanical Equipment Summary is required for all submittals. ® MECH-3C Mechanical Ventilation and Reheat is required for all submittals with mechanical ventilation. 0 MECH-4C Fan Power Consumption is required for all prescriptive submittals. EnergyPro 5.1 by EnergySoft User Number: 2655 RunCode: 2011-10-31T16:49:56 ID: Pae 13 of 19 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2C Project Name Date Footloose Reflexology 1 10/31/2011 Indicate Air Systems Type Central, Single Zone, Package, VAV, or etc... Item or System Tags i.e. AC -1, RTU -1, HP -1 Footloose Number of Systems r 1 Indicate Pa a Reference on Plans or Schedule and indicate the applicable exception(s) MANDATORY MEASURES T-24 Sections Heating Equipment Efficiency 112 a 3.40 COP Cooling Equipment Efficiency 112 a 10.5 EER HVAC Heat Pump Thermostat -112(b), 112(c) Yes Furnace Controls%Thermostat 112(c), 115(a) n/a Natural Ventilation -121(b) Yes Mechanical Ventilation 121 b 334 cfm VAV Minimum Position Control 121 c No Demand Control Ventilation 121 c No Time Control 122(e) Programmable Switch Setback and Setup Control 122(e) Setback Required Outdoor Damper Control 122(f) Auto Isolation Zones 122 n/a Pipe Insulation 123 Duct Location/ R -value 124 nla PRESCRIPTIVE MEASURES Calculated Design Heating Load 144(a & b 22,539 Btu/hr Proposed Heating Capacity 144(a & b 68,693 Btu/hr Calculated Design Cooling Load 144(a & b 40,684 Btu/hr Proposed Cooling Capacity 144(a & b 48,182 Btu/hr Fan Control 144(c) Constant Volume DP Sensor Location 144(c) Supply Pressure Reset (DDC only) 144(c) Yes Simultaneous Heat/Cool 144(d) No Economizer 144(e) No Economizer Heat Air Supply Reset 144(f) Constant Temp Cool Air Supply Reset 144(f) Constant Temp Electric Resistance Heating' 144 Air Cooled Chiller Limitation 144(i) Duct Leakage Sealing. If Yes, a No MECH-4-A must be submitted 144 k 1. Total installed capacity (MBtu/hr) of all electric heat on this project exclusive of electric auxiliary heat for heat pumps. If electric heat is used explain which exception(s) to §144(g) apply. EnergyPro 5.1 by Ener Soft User Number: 2655 RunCode: 2011-10-31716:49:56 ID: Pae 14 WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2 MECH-2C Project Name Date Footloose Reflexology 10/31/2011 WATER' SIDE SYSTEMS: Chillers, Towers, Boilers, H dronic Loo s Item or System Tags (i.e. AC -1, RTU -1, HP Number of Systems F Indicate Page Reference on Plans or Specification 2 MANDATORY MEASURES T-24 Sections Equipment Efficiency 112(a) Pipe Insulation 123 PRESCRIPTIVE MEASURES Cooling Tower Fan Controls 144(a & b Cooling Tower Flow Controls 144(h) Variable Flow System Design 144(h) Chiller and Boiler Isolation 144 CHIN and HHW Reset Controls 144(j) WLHP Isolation Valves 144(j) VSD on CHW, CW & WLHP Pumps>5HP 144(j) DP Sensor Location I 144(j) 1. The proposed equipment need to match the building plans schedule or specifications. If a requirement is not applicable, put "N/A" in the column next to applicable section. 2. For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column next to applicable section. Service Hot Water, Pool Heating Item or System Tags DHW Heater (i.e. WH -1, WHP, DHW, etc...) Number of Systems 1 Indicate Page Reference on Plans or Schedule' MANDATORY MEASURES T-24 Sections SERVICE HOT WATER Certified Water Heater 111, 113(a) Standard Gas 50 gal or Less Water Heater Efficiency 113(b) 0.53 EF Service Water Heating Installation 113(c) Controls Req. Pipe Insulation 123 n/a POOL AND SPA Pool and Spa Efficiency and Control 114(a) n/a Pool and Spa Installation 114(b) n/a Pool Heater — No Pilot Light 115(c) n/a Spa Heater — No Pilot Light 1 115 d n/a Pipe Insulation 1 123 Required 1. The Proposed equipment needs to match the building plans schedule or specifications. If a requirement is not applicable, put "N/A" in the column next to applicable section. 2. For each water heater, pool heater and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. EnergyPro 5.1 by EnergySoft User Number.' 2655 RunCode: 2011-10-31 T16:49:56 ID: Pae 15 of 19 MECHANICAL VENTILATION AND REHEAT MECH-3C Project Name Date Footloose Reflexology 10/31/2011 MECHANICAL VENTILATION §121 b 2 REHEAT LIMITATION (§144(d)) AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E F G H I J K L M N Zone/System Condition Area ft2 CFM per ft2 Min CFM By Area B X C Number Of Peo le CFM per Person Min CFM by Occupant E X F REQ 'D V.A. Max of D or G Design Ventilation Air CFM 50% of Design Zone Supply CFM B X 0.4 CFM/ft 2 Max. of Columns H, J, K, 300 CFM Design Minimum Air Setpoint Transfer Air Footloose 1,650 0.15 248 248 3341 1 Footloose I I I I I Total 248 3341 1 Totals Column I Total Design Ventilation Air C Minimum ventilation rate per Section 121, Table 121-A. E Based on fixed seat or the greater of the expected number of occupants and 50% of the CBC occupant load foregress purposes fors aces without fixed seating. H Required Ventilation Air REQ'D V.A. is the larger of the ventilation rates calculated on an AREA BASIS or OCCUPANCY BASIS Column D or G). I Must be greater than orequal to H, or use Transfer Air column N to make up the difference. J Design fan supply CFM Fan CFM x 50%; or the design zone outdoor airflow rate per 121. K Condition area ft2 x 0.4 CFM / ft2; or L Maximum of Columns H, J, K, or 300 CFM M This must be less than orequal to Column L and greater than orequal to the sum of Columns H plus N. N Transfer Air must be provided where the Required Ventilation Air (Column H) is greater than the Design Minimum Air (Column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air Column H and the Design Minimum Air Column M), Column H minus M. E7e Pro 5.1 by Ener Soft User Number: 2655 Run Code: 2011-10-31716:49:56 /D: Pae 16 of 19 FAN POWER CONSUMPTION MECH-4C Project Name Footloose Reflexology Date 10/31/2011 NOTE: Provide one copy of this worksheet for each fan system with a total fan system horsepower greater than 25 hp for Constant Air Volume (CAV) Fan Systems or Variable Air Volume (VAV) Systems when using the Prescriptive Approach. See Power Consum tion of fan §144(c). A B C D E F Fan Description Design Brake HP Effici ncy Number of Fans Peak Watts B X E X 746 / C X D Motor Drive Supply Fan 1.200 85.5% 100.0% 1.0 1,047 TOTALS AND ADJUSTMENTS FILTER PRESSURE ADJUSTMENT Equation 144-A in §144(c) of the Energy Standards. 1 TOTAL FAN SYSTEM POWER WATTS, SUM COLUM F 1,047 2 SUPPLY DESIGN AIRFLOW CFM 2,400 A) If filter pressure drop (SP.) is greater than 1 inch W. C. or 245 Pascal then enter SPe on line 4. Enter Total Fan pressure drop across the fan (SPI) on Line 5. 3 TOTAL FAN SYSTEM POWER INDEX Row 1 / Row 2 W/CFM 4 SPe 5 SPI B Calculate Fan Adjustment and enter on line 6. 6 Fan Adjustment = 1- SPe-1 / SPf C) Calculate Adjusted Fan Power Index and enter on Row 7 7) ADJUSTED FAN POWER INDEX (Line 3 x Line 6)' 0.436 W/CFM 1. TOTAL FAN SYSTEM POWER INDEX or ADJUSTED FAN POWER INDEX must not exceed 0.8 W/CFM for Constant Volume systems or 1.25 W/CFM for VAV systems. EnergyPro 5.1 by EnergySoft . User Number., 2655 RunCode: 2011-10-31T16:49:56 /D: Pae 17 of 19 MECHANICAL MANDATORY MEASURES: NONRESIDENTIAL MECH-MM Project Name Date Footloose Reflexology 710/31/2011 Equipment and System Efficiencies §111: Any appliance for which there is a California standard established in the Appliance Efficiency Regulations will comply with the applicable standard. §115(a): Fan type central furnaces shall not have a pilot light. §123: Piping, except that conveying fluids at temperatures between 60 and 105 degrees Fahrenheit, or within HVAC equipment, shall be insulated in accordance with Standards Section 123. §124: Air handling duct systems shall be installed and insulated in compliance with Sections 601, 602, 603, 604, and 605 of the CMC Standards. Controls §122(e): Each space conditioning system shall be installed with one of the following: 1A. Each space conditioning system serving building types such as offices and manufacturing facilities (and all others not explicitly exempt from the requirements of Section 112 (d)) shall be installed with an automatic time switch with an accessible manual override that allows operation of the system during off -hours for up to 4 hours. The time switch shall be capable of programming different schedules for weekdays and weekends and have program backup capabilities that prevent the loss of the device's program and time setting for at least 10 hours if power is interrupted; or 1 B. An occupancy sensor to control the operating period of the system; or 1 C. A 4 -hour timer that can be manually operated to control the operating period of the system. 2 Each space conditioning system shall be installed with controls that temporarily restart and temporarily operate the system as required to maintain a setback heating and/or a setup cooling thermostat setpoint. Each space conditioning system serving multiple zones with a combined conditioned floor area more than 25,000 §122(8)' square feet shall be provided with isolation zones. Each zone: shall not exceed 25,000 square feet; shall be provided with isolation devices, such as valves or dampers that allow the supply of heating or cooling to be setback or shut off independently of other isolation areas; and shall be controlled by a time control device as described above. §122(c): Thermostats shall have numeric setpoints in degrees Fahrenheit (F) and adjustable setpoint stops accessible only to authorized personnel. §122(b): Heat pumps shall be installed with controls to prevent electric resistance supplementary heater operation when the heating load can be met by the heat pump alone Each space conditioning system shall be controlled by an individual thermostat that responds to temperature within the zone. Where used to control heating, the control shall be adjustable down to 55 degrees F or lower. For cooling, the §122(a&b): control shall be adjustable up to 85 degrees F or higher. Where used for both heating and cooling, the control shall be capable of providing a deadband of at least 5 degrees F within which the supply of heating and cooling is shut off or reduced to a minimum. Ventilation §121(e): Controls shall be provided to allow outside air dampers or devices to be operated at the ventilation rates as specified on these plans. §122(f): All gravity ventilating systems shall be provided with automatic or readily accessible manually operated dampers in all openings to the outside, except for combustion air openings. Ventilation System Acceptance. Before an occupancy permit is granted for a newly constructed building or space, or a §121(f): new ventilating system serving a building or space is operated for normal use, all ventilation systems serving the building ors ace shall be certified as meeting the Acceptance Requirements for Code Compliance Service Water Heating Systems §113(c) Installation 3. Temperature controls for public lavatories. The controls shall limit the outlet Temperature to 110° F. Circulating service water -heating systems shall have a control capable of automatically turning off the circulating pump 2 when hot water is not required. EnergyPro, 5.1 by EnergySoft User Number: 2655 RunCode: 2011-10-31T16:49:56 /D: Pae 18 of 19 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Footloose Reflexology Date 10/31/2011 System Name Footloose Floor Area 1,650 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 1,337 Return Vented Lighting Return Air Ducts Return Fan Ventilation 334 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output perSystem 69,000 18,308 1,134 0 0 Total Output Btuh 69,000 0 Output Btuh/s ft 41.8 915 0 Cooling System 0 0 Output perSystem 71,000 13,484 3,099 334 15,761 Total Output Btuh 71,000 0 915 33,623 4,233 0 Total Output Tons 5.9 0 Total Output Btuh/s ft 43.0 Total Output s ft/Ton 278.9 15,761 Air System CFM perSystem 2,400 HVAC EQUIPMENT SELECTION Airflow cfm 2,400 Carrier 50HJQ007 48,182 16,341 43,096 Airflow cfm/s ft 1.45 7.5 kW Supplemental Electric 25,598 Airflow cfm/Ton 405.6 Outside Air % 13.9 % Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 48,182 16,341 Jul 3PM 68,693 Jan 1 AM Outside Air cfm/s ft 0.20 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 64 OF Outside Air 334 cfm Supply Fan 2,400 cfm 70 OF 64 OF 81 OF 91 OF Heating Coil Aux. Heat Coil 91 OF ROOM 70 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112178 OF 80 / 66 OF 80 / 66 OF 61 / 60 OF O � Outside Air 334 cfm Supply Fan Cooling Coil 2,400 cfm 74 164 OF r 61 / 60 OF 59.6% ROOM 74164 IF EnergyPro 5.1 by EnergySoff User Number: 2655 RunCode: 2011-10-31T16:49:56 /D: Page 19 of 19