The URL can be used to link to this page

10-0915 (SFD)P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number: Property Address: APN: Application description Property Zoning: Application valuation: Applicant: 10-00000915 81681 BAFFIN AVE 767-200-998-114 -330762- DWELLING - SINGLE FAMILY LOW DENSITY RESIDENTIAL 474580 Td4t 4 4 QuAim BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Owner: EAST OF MADISON LLC PO BOX 1482 DETACHED LA QUINTA, CA 92247 �yArrchitectt or Engineer: G- 3oglo� LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I a . ' ensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business rofe ' nals Code, and my License is in full force and effect. License Class: Bse No.: 915336 / Date: f Contractor. NER-BUILDER DECLARATION I hereby affirm under penalty of perjury that I xempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and fessions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ I I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the.property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). 1 _) I am exempt under Sec. B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: + Lender's Address: LQPER111IT Contractor: DBCA INC P.O. BOX 1482 LA QUINTA, CA 92247 (760)393-5271 Lic. No.: 915336 VOICE (760) 777-7012 FAX (760) 777-7011 ' INSPECTIONS (760) 777-7153 Date: 12/07/10 \�. WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation; as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. _ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier TRAVELERS PROP Policy Number YEUB282D779708 I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as ome subject to the workers' compensation laws of California, and agree that, if I should b co sub' o the workers' compensation provisions of Section / 3700ofthe Labor Code, I a orth ith co y with those provisions. Date: 1 l ' Applican WARNING: FAILURE TO SECURE WORKERS' MPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PEN IES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS 1$100,000). IN ADDITION TO TH ST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTERE T, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. 1 certify that 1 have read this application and state that the v i ormation is correct. I agree to comply with all city and county ordinances and state laws relating to building c truc o , d hereby authorize representatives of this county to enter upon the above-mentioned property I. i esti n purp s. Date:_ Signature (Applicant or Agent): Application Number . . . . . 10-00000915 Structure Information Construction Type . . . . . TYPE V, UNPROTECTED Occupancy Type . . . . . . DWELLG/LODGING/CONG <=10 Other struct info . . . . . CODE EDITION 2007/08 ENERGY # BEDROOMS 5.00 FIRE SPRINKLERS NO GARAGE SQ FTG 999.00 PATIO SQ FTG 1362.00 NUMBER OF UNITS 1.00 1ST FLOOR SQUARE FOOTAGE 4459.00 -------=-------------------------------------------------------------------- 2ND FLOOR.SQUARE FOOTAGE 948.00 Permit . . . BUILDING PERMIT Additional desc . . Permit Fee . . . . 1952.00 Plan Check Fee 1268.80 Issue Date . . . . Valuation . . . . 474560 Expiration Date . . 6./05/11 Qty Unit Charge Per Extension BASE FEE 639.50 375.00 3.5000 ---------------------------------------------------------------------------- THOU BLDG 100,001-500,000' 1312.50 Permit . . . ELEC-NEW RESIDENTIAL Additional desc . Permit Fee . . . . 266.47 Plan Check Fee 66.62 Issue Date Valuation . . . . 0 Expiration Date 6/05/11 Qty Unit Charge Per Extension BASE FEE 15.00 5407.00 .0350 ELEC NEW RES - 1 OR 2 FAMILY 189.25 2361.00 .0200 ELEC GARAGE OR NON-RESIDENTIAL 47.22 1.00 15.0000 ---------------------------------------------------------------------------- EA ELEC TEMPORARY POWER POLE 15.00 Permit . . . GRADING PERMIT Additional desc . Permit Fee . . . . 15.00 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date 6/05/11 Qty Unit Charge Per Extension ---------------------------------------------------------------------------- BASE FEE 15.00 Permit . . . MECHANICAL LQPERMIT Application Number . . . . . 10-00000915 Permit . . . MECHANICAL Additional desc . . Permit Fee . . . . 173.00 Plan Check Fee Issue Date Valuation Expiration Date 6/05/11 43.25 0 Qty Unit Charge Per Extension Extension BASE FEE 15.00 31.00 BASE FEE 15.00 2.00 9.0000 EA MECH FURNACE <=100K 18.00 2.00 11.0000 EA MECH FURNACE >100K 22.00 4.00 16.5000 EA MECH B/C >3-15HP/>100K-500KBTU 66.00 7.00 6.5000 EA MECH VENT FAN 45.50 1.00 ---------------------------------------------------------------------------- 6.5000 EA MECH EXHAUST HOOD 6.50 Permit . . . . . . PLUMBING Additional desc . . Permit Fee . . . . 261.75 Issue Date . . . Expiration Date . . 6/05/11 Plan Check Fee.. . 65.44 Valuation . . . . 0 Qty Unit Charge Per Extension BASE FEE 15.00 31.00 6.0000 EA PLB FIXTURE 186.00 1.00 15.0000 EA PLB BUILDING SEWER 15.00 1.00 7.5000 EA PLB WATER HEATER/VENT 7.50 1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00 1.00 9.0000 EA PLB LAWN SPRINKLER SYSTEM 9.00 15.00 .7500 EA PLB GAS PIPE >=5 11.25 1.00 15.0000 EA PLB GAS METER 15.00 ------------------------------------- Special Notes and Comments --------------------------------------- 5407 SF 2 STORY SFD. INCLUDES GUEST CASITA. R-3 OCCUPANCY. TYPE V -B CONSTRUCTION. 2007 CODES 2008 ENERGY. **PERMIT DOES NOT INCLUDE BLOCK WALLS, FENCES, SWIMMING POOLS, SPA, DRIVEWAY APPROACH and BBQ'S** ---------------------------------------------------------------------------- Other Fees . . . . . . . ART IN PUBLIC PLACES -RES 686.45 BLDG STDS ADMIN (SB1473) 19.00 DIF COMMUNITY CENTERS -RES 74.00 DIF CIVIC CENTER - RES 995.00 ENERGY REVIEW FEE 126.88 DIF FIRE PROTECTION -RES 140.00 DIF LIBRARIES - RES 355.00 MULTI -SPECIES (MSHCP) FEE 1284.00 DIF PARK MAINT FAC - RES 22.00 LQPFRMIT Application Number . . . . . 10-00000915 ---------------------------------------------------------------------------- Other Fees . . . . . . . . . DIF PARKS/REC - RES 892.00 STRONG MOTION (SMI) - RES 47.46 DIF STREET MAINT FAC -RES 67.00 DIF TRANSPORTATION - RES 1930.00 Fee summary ----------------- Charged ---------- Paid Credited ------------------------------ Due Permit Fee Total 2668.22 :00 .00 2668.22' Plan Check Total 1444.11 750.00 .00 694.11 .Other Fee Total 6638.79 .00 .00 6638.79 Grand Total 10751.12 750.00 .00 10001.12 LQPERMIT Building Address C� YJT � '01-6s/ 4MA-1 Owner J � Mailing �Oj� Address City N//� ZIp��G�% J Te(w� ! KJ - –716' Contract lw,X049� 1&4444" P.O. BOX 1504 78-495 CALLE TAMPICO T1� LA QUINTA, CALIFORNIA 92253 muurubb citye Zip �� Tel. State Lic. N/ f 2 City & Classif. 9r/ %(Q Lic. # Arcn., tngr Designer %;t��ZlpState I Lic. # I am ONAC R'S DECLARATION I hereby affirm that I am lic ed nder pro 'ions of Chapter 9 (commencing with Section 7000 of Division 3 of the Bu i d Profess ns Code, and my licenseis I force and effect. I -/y / A /A ONER-BUILDER DECLARATION 1 hereby affirm that I am empt from the Contractor's License Law for the following reason: (Sec. 7031.5, Busine and Professions Code: Any city or county which requires a permit to construct, alter, imp ve, demolish, or repair any structure, prior to its issuance also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the provisions of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, or that he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500). O I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for,sale. (Sec. 7044, Business and Profes- sions Code: The Contractor's. License Law does not°apply to an owner of property who builds or improves thereon and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or, Im- provement is sold within one year of completion, the owner -builder will have the burden of proving that he did not build or improve for the purpose of sale). O I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractor(s) licensed punsa o the Contractor's License Law) O 1 am exempt under Sec. e� & .C. or ' reason Date— WORKER'S ate O WORKER'S COMPSrATION DECLARATION I hereby affirm that I have a certificate otoself-insure, or a certificate of Worker's Compensationnsurance, or a certified cop(Sec. 3800, Labor Code.) Policy No. Company O Copy is filed with the city. O Certified copy is hereby furnished. CERTIFICATE OF EXEMPTION FROM WORKERS' COMPENSATION INSURANCE (This section need not be completed if the per kfor hundred dollars ($100) valuation or less). I certify that in the performance of thew permit is issued, I shall not employ any person in any manner soas to beco Wo ers' Compensation Laws of California. Date Owner NOTICE TO APPLICANT. If, after making this C ''icate of Exemption you should become subject to the Workers' Compensation provisic of the Labor Code, you must forthwith comply with such provisions or this permit shall i earned revoked. CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued. (Sec. 3097, Civil Code.) Lender's Name Lender's Address This is a building permit when properly filled out, signed and validated, and is subject to expiration if work thereunder is suspended for 180 days. I certify that I have read this ap I do and state that the above information is correct. I' agree to comply with all city an nt o ' ances and state laws relating to building construction, and hereby authorize a se tatives this.city to enter the above-mentioned property for inspection purposes. Signature of applic Date�� Mailing Address City, State, Zip WHITE = BUILDING DEPARTMENT APPLICATION ONLY BUILDING: TYPE CONST. 000. GRP. A.P. Number Legal Description / Project Description Sq. Ft. �6 No. No. Dw. / Size T Stories Units Newx Add ❑ Alter ❑ Repair ❑ Demolition ❑ ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATE— Issued by: Validated by:— Validation: YELLOW = APPLICANT INSPECTOR Date Permit PINK = FINANCE Estimated Valuation PERMIT AMOUNT Plan Chk. Dep. Plan Chk. Bal. Const. Mech. Electrical Plumbing S.M.I. Grading Driveway Enc. Infrastructure IAI Cf lu ryo ' �� UE TOTAL REMARKS ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATE— Issued by: Validated by:— Validation: YELLOW = APPLICANT INSPECTOR Date Permit PINK = FINANCE Coachella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVEL ONE AMOUNT: LEVEL TWO AMOUNT: MITIGATION AMOUNT: COMM/IND. AMOUNT: DATE: RECEIPT: CHECK#: INITIALS: CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Name: 5500 Plan Date: December 22, 2010 Owner's Name: Madison, LLC Phone No. Project Address: 81-681 Baffin Ave La Quinta, CA Project Description: Single Family Dwelling APN: 767-710-027 Tract #: Type of Development: Residential XX, Commercial Total Square Feet of Building Area: 5,407 Lot #'s: Industrial Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on t"alf of the owner/developer. Dated: 12/22/2010 Signature: ***************************************** R * * * * * * * * * * * * * * * * * * * * * * * * * * * * SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PRO- HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code Gov. Code Project Agreement Existing Not Subject to Fee 17620 65995 Approval Prior to 1/1/87 Requirement Note: Number of Sq.Ft. 5,407 Amount per Sq.Ft. $2.97 Amount Collected $16,058.79 Building Permit Application Completed: Yes/No By: Jamie T. Brown, Asst. Supt., Business Services Certificate issued by: Tony Barrios Project Manager Signature: --7 NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. !blOt complianco. form updawd 1-20M 11/2010 RECORDING REQUESTED BY: Fidelity National Title Company Escrow No. Title Order No. 9779859 When Recorded Mail Document and Tax Statement To: The Madison Club 80-349 Via Mirasol La Quinta, CA 92253 APN4r0Zt081 ed list The undersigned grantor(s) declarels) Documentary transfer tax Is $0.00 DOC a 2005-0822763 10/04/2005 08:00A Fee:36.00 Page 1 of 4 Recorded in Official Records County of Riverside Larry W. Ward Assessor, County Clerk 8 Recorder 1111111111111111111111111111111111111111111111111111111 M $ U PAGE SIZE DA .R NOCOR SMF MISC. A R L COPY LONG REFUND NCNG EXAM GRANT DEED .,.,...,...,....., _..._. ....---.__� 1 computed on full .value of property conveyed, or 1 computed on full value less value of liens or encumbrances remaining at time of sale, 1 Unincorporated Area City of La Quinta FOR A VALUABLE CONSIDERATION, receipt of which is hereby acknowledged, ND La Quinta Partners, LLC, a Delaware limited liability company hereby GRANT(S) to East of Madison, LLC, a Delaware limited liability company the following described real property In the City of La Quinta, County of Riverside, State of CaQfomia: This Grant Deed is being recorded to correct the legal description in the certain Grant Deed recorded May 17, 2005, Instrument No. 2005-0389850, Official Records of Riverside County, California. DATED: September 20, 2005 STATE OF CAt 10 COUN�aY OF l9 -k- N ON w,bt✓ 2ta' coS before me, Q41u OOAS aa.-oti personally appeared r. In .i. rr,11►t personally known to me (or proved to me on the basis of satisfactory evidence) to be the person(s) whose name(s) is/are subscribed to the within instrument and acknowledged to me that he/she/they executed the same in his/her/their authoriz d ' (' ND La Quinta Partners, LLC, a Delaware limited liability company By: Nationwide Realty Investors, Ltd., an Ohio limited liability company, its managing member By: r A& Brian J. Ellis (,j e capacity les), and that by his/her/their signature(s) on the instrument the f2�gP S` person(s), or the entity upon behalf of which the MOND REGINARHOADSUR person(s) acted, executed the instrument. r l ARHOADSOR i at Law Notary Public, State of Ohio Witnesshand and offic' seal. �` �qrF OF W CommiSeci a03 R.Ephbon Q - Signature C MAIL TAX STATEMENTS AS DIRECTED ABOVE FD -213 (Rev 9194) GRANT DEED APN'S 767-200-027 THRU 029 767-210-012, 031, 033 767-210-042 THRU 050 f EXHIBIT "A" PARCEL 1: The Northwest 1/4 of the Northwest 1/4. of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian, according to United States Government Survey thereof. Excepting therefrom the Northerly 30.00 feet, lying within 52nd Avenue. Also excepting therefrom the Westerly 30.00 feet lying within Madison Street. Also excepting therefrom any portion lying within Tract No. 29894-1, as shown by map on file in Book 305, Pages 14 through 22, inclusive, and Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCEL 2: The North 1/2 of the Southwest 1/4 of Section 10, Township 6. South, Range 7 East; San Bernardino Base and Meridian, according to the Official Plat thereof. Excepting therefrom the Westerly 30.00 feet lying within Madison Street. Also excepting therefrom the Northerly 30.00 feet as conveyed to the County of Riverside by deed recorded October 19, 1959, as Instrument No. 89349, Official Records, which was not vacated by Resolution No. 2000-164 and 2000-163, recorded December 18, 2000, as Instrument No. 2000- 502483, Official Records. Also excepting therefrom any portion lying within Tract 29894-1, as shown by map on file in Book 345, Pages 14 through 22, inclusive and'Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County. PARCEL 3: A portion of the Southwest 1/4 of the Southwest 1 /4 of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian, in the City of La Quinta, County of riverside, State of California, according to the Official Plat thereof, described as follows: ' Commencing at the Southwest corner of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian; City of La Quinta, County of Riverside, State of California; thence along a line that bears North 89° 23'. 66" East, a distance of 787.86 feet; thence North 081, 15' 08" West a distance of 30.00 feet to the true point of beginning; thence along the same line distance of 1285.89 feet; thence North 89° 23' 17" East, a distance of 529.89 feet; thence South 000 15' 8" East, a distance of 1285.89 feet; thence South 89' 23' 56" West a distance of 529.89 feet to the true point of beginning. Excepting therefrom any portion lying within Tract No. 29894-2, as shown by map on file in Book 305, Pages 14 through 22, inclusive and Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCEL 4: The Southwest 1/4 of the Northwest 1/4 of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian, in the County of Riverside, State of California, according to the Official Plat thereof. Excepting therefrom any portion lying within Tract No. 29894-1, as shown by map on file in Book 305, Pages 14 through 22, inclusive and Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCEL 5: The West 1/2 of the Southeast 1./4 of the Southwest 1/4 of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian, according to the Official Plat thereof. Excepting therefrom any portion lying within Tract No. 29894-1, as shown by map on file in Book 305, Pages 14 through 22, inclusive and Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCEL 6: The East 1/2 of the Southeast 1/4 of the Southwest 1/4 of Section 10, Township 6 South, Range 7 East, San Bernardino Base and Meridian, as shown by the United States Government Survey approved December 15, 1903 by the Surveyor General. Excepting therefrom the South 30.00 feet in public highway Also excepting therefrom any portion lying within Tract No. 29894-1, as shown by map on file in Book 305, Pages 14 through 22, inclusive and Amended Tract No. 29894-2, as shown by map on file in Book 327; Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCEL 7: The Southeast 1/4 of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian Excepting therefrom the Northerly rectangular 30.00 feet of the Southeast 1/4 of Section 10, Township 6 South, Range 7 East, San Bernardino Meridian, as conveyed to the County of Riverside by deed recorded October 19, 1959, as Instrument No. 89348 of Official Records of Riverside County, California. Also excepting therefrom any portion lying within Tract No. 29894-1, as shown by map on file in Book 305, Pages 14 through 22, inclusive and Amended Tract No. 29894-2, as shown by map on file in Book 327, Pages 56 through 88, inclusive, all of Maps, Records of Riverside County, California. PARCELS: Lots F, G and H of -Tract No. 29894-1, in the City of La Quinta, as shown by map on file in Book 305, Pages 14 through 22, inclusive of Maps, in the Office of the County Recorder of Riverside County, California. t Radian :Protecting Your hergyfosts® , Studies have shown -that up to 93% of ceiling heat gain in summer months occurs from radiant heat transfers from attics heated by radiant energy from the sun. Roof shingles and decking absorb radiant heat generated by the sun and transfer this heat into attic spaces heating up existing insulation. Once this existing insulation meets its saturation point, it then radiates this heat to all surfaces within the interior of the home (ceilings and walls). Radiant barriers BLOCK almost ALL of this radiant heat. RadiantGUARDO double -sided radiant barrier products are the leading products on the market used by home owners, new home builders, and agricultural and manufacturing enterprises. Our radiant barrier foil insulation products are made from 99% pure aluminum making them -the best at blocking -97% of the radiant heat that attempts to enter building structures in the summer months or escape in the winter months helping save energy year round. In the summer months, our radiant barrier products can reduce attic temperatures by up to 30 degrees when installed to the underside of roof rafters. Lowering attic . temperatures provides a significant benefit by reducing air conditional loads and energy usage. Radiant barriers can also: Reduce heat transfer from attic to living spaces b' up to 50%, • Extend the life of air conditioning units, and • Increase the comfort level of a home. RadiantGUARDO radiant barriers can be installed in any of the following locations:". • Stapled directly to roof decking or draped over roof rafters before decking is applied, ; • Stapled to the underside of roof rafters in the attic, • Rolled out over existing insulation on attic .floor, or • Stapled to exterior as a house wrap before brick or siding is applied. , RadiantGUARD® Technical Specifications RadiantGUARD® Radiant Barriers meet the California Insulation Standards and the Standard'Specifications•for Sheet Radiant Barriers for Building Construction Applications ASTM C1313. Made In The �U'.S.A , 1111111111111MV MM IA-. 17 lbs per 1,000 sf .- 28 lbs per 1,00.0 sf 28 lbs per 1,000 sf Wel ht; Tensile, Strength, MachineiDlrection-, Cross. Direction. 14.1 Ibfin width 8.7 lb/in width 80.4 Ib/in width 96.4 lb/in width 65.4 Win width 64.7 lb/inwidth Mullen Burst Strength, 22 psi , 160 psi 166 psi Flame'S read 15 10 10 SmokelDevelopment 5 10 10 Fire3Ratin Class A/Class 1 Class A / Class 1 Class A / Class 1 Water Vapor, Permeability, 105E/m2/24hrs 60G/m2/24h, 60G/m2/24hrs Permeance 15 perms 8.5 perms -8.5 perms solid version .02 perms) solid version .02 perrn; Reflectivity, 97% :97% 97% Emmitance 3% 3% 3% RadiantGUARD® Radiant Barriers meet the California Insulation Standards and the Standard'Specifications•for Sheet Radiant Barriers for Building Construction Applications ASTM C1313. Made In The �U'.S.A , to INSTALL a ft@ Radiant Barrier ► Block 977 of the radiant heat No. Lower attic temperatures up to 30° No. Reduce heat flow to living spaces up to 50% No. Lower monthly utility costs ► NFPA Class A and UBC Class 1 fire rating approvals ► Comply with Standard Specifications for Sheet Radiant Barriers for Building Construction Applications (C 1313) RadiantGUARD® radiant barriers help you save energy and participate in protec-ing the environment. RadiantGUARD® is available in two durability grades and delivered in easy to insiall 48" wide 500 and 1,000 square feet rolls. For more informaion, please Visit or call today R;;di;;ntG1JARD www.Ro'diantGUARD.com Protecting Your Energy Costs`~' toll free (866) 52&84t2 QD 0 s Coatings & Waterproofing DESCRIPTION The CCW -5013 Deck Coating System consists of a one - part polyurethane Base Coat and a one -part aliphatic polyurethane Top Coat. The system prevents water from entering occupied space below, protects the surface to which it is applied from damage by water and salts and provides a safe, slip -resistant, attractive walking surface. The Top Coat is available in five fade -resistant colors. TYPICAL USE The CCW -5013 System is used for waterproofing concrete balconies, plaza decks, terraces and other areas subject to pedestrian foot traffic. LIMITATIONS • Do not apply primer or coatings to a frosty, damp or wet surface. • Do not proceed with coating application if temperature is below 40°F or if rain is imminent within 8 hours after application. Cure time is slower in cool weather. • Polyurethane coating cure times may be significantly faster than listed when temperature and/or humidity are high. • If metal pan is used for concrete form, the pan must be vented. Not for use on grade. • If deck has a between -slab membrane, consult with Carlisle representative. PACKAGING CCW -501 Base Coat and CCW -503 Top Coat: 5 gallon pails and 55 gallon drums CCW -501-T Detail Coat: 5 gallon pails Shelf life 12 months from date of manufacture when stored at 85*F or below. . ti. APPLICABLE STANDARDS ASTM C957-93 UL 790 Class A TOP COAT COLORS Standard colors in stock include Stone Gray, Colonial Gray, Beige, Desert Tan and Arizona Tan. Additional colors are available with a 250 gallon minimum order. WARNINGS AND HAZARDS Before use, refer to MSDS for important warnings and safety information. Use only in areas with adequate ventilation. Avoid breathing vapors. Keep away from heat and flame. Avoid contact with eyes and skin. In the event of skin contact, remove immediately and wash with warm, soapy water. Wear eye protection. Always wash hands before eating. TYPICAL PROPERTIES* CCW -501 BASE COAT PROPERTY y TYPICAL VALUE C,CM5013 pp ASTM C1250 85% Hardness, Shore A ASTM D2240 63 Tensile Strength Pedestrian Traffic 1 o~ Tear, Die C tDeckSystem Recoat Time* ASTM D624 . 140 Ib/in Adhesion to Concrete ' ASTM D903 23 PLI Low Temp Flexibility ASTM D522 WARNINGS AND HAZARDS Before use, refer to MSDS for important warnings and safety information. Use only in areas with adequate ventilation. Avoid breathing vapors. Keep away from heat and flame. Avoid contact with eyes and skin. In the event of skin contact, remove immediately and wash with warm, soapy water. Wear eye protection. Always wash hands before eating. TYPICAL PROPERTIES* CCW -501 BASE COAT PROPERTY METHOD TYPICAL VALUE Solids Content ASTM C1250 85% Hardness, Shore A ASTM D2240 63 Tensile Strength ASTM D412 850 psi Tear, Die C ASTM D412 625% Recoat Time* ASTM D624 . 140 Ib/in Adhesion to Concrete ' ASTM D903 23 PLI Low Temp Flexibility ASTM D522 -65°F CCW -503 TOP COAT PROPERTY METHOD TYPICAL VALUE Solids Content ASTM C1250 72% Hardness, Shore A ASTM D2240 91 Tensile Strength ASTM D412 3200 psi Tear, Die C ASTM D412 190% Recoat Time* ASTM D624 300 Ib/in Low Temp Flexibility and crack bridging" ASTM C957 Pass Weather Resistance ASTM G53 No chalking @ 2000 hrs Abrasion Resistance'* ASTM C501 <50 mg Permeability" ASTM E96 (B) <1.0 perms Individual lots may vary +/- 10% from Typical value ** System INSTALLATION Surface should be properly sloped to drain freely and eliminate the ponding of water. It must be clean, dry and free of laitance, dirt, oil, grease or other contamination. If metal decking is used as a permanent form, the metal must be vented. If the deck is cast over precast tees or slabs, control joints should be placed directly over all joints per detail DC -1 B. Surface shall have a steel trowel followed by a fine -hair broom finish. New concrete must be in place for 28 days minimum. Curing compounds must be of the seff-dissipating type and be approved by the Carlisle representative. Old concrete must be structurally sound. Spalled areas shall be filled. Loose or deteriorated concrete shall be replaced. Abrade steel -trowel finish by mechanical or chemical means. In the event of existing coatings, contact Carlisle. Refer to Carlisle DC series details for proper detailing of cracks, drains, angle changes, etc. Saw -cut cracks greater than 1/16" wide to 1/4" wide by 1/4" deep. Grind off high spots, ridges and fins. Fill all low spots, voids, rock pockets and excessively rough and spalled areas with approved non -shrink grout or epoxy patching compound. Clean joints and saw -cut cracks. All moving cracks over 1/16" wide and all expansion joints less than 1" wide shall be cleaned, primed, fitted with a backing rod and caulked with an approved sealant by CCW or CCW -201 Sealant as recommended by the data sheet. For larger joints, contact Carlisle representative. Tool sealant flush in joints up to 1/2" wide, slightly concave on wider joints. Any required metal or neoprene flashings should be installed at this time. Apply a 1" face, 450 cant of sealant at all angle changes, including projections through the deck, walls, curbs, etc. Allow sealant to cure thoroughly. Mix primer and apply per instructions below to all areas to receive a detail coat. Extend primer 2" past area to receive detail coat to allow primer tie-in during deck coating installation. Allow primer to dry 1 hour minimum, 8 hours maximum. Apply a stripe coat of CCW -501-T Detail Coat, 30 mils thick, 6" wide, centered over all sealant cants, sealed cracks, hairline cracks, control joints, expansion joints (less than 1/2" wide) and cold joints. Apply a stripe coat of CCW -501 -T Detail Coat, 30 mils thick, 6" wide, centered over any transition between dissimilar materials, such as concrete to metal flashings, concrete to wood or wood to metal, and reinforce with CCW Reinforcing Fabric. Allow the stripe coat to cure over night (16 hours minimum). Caution: Ensure that all sealant is thoroughly cured. Uncured sealant may affect the cure of the coating. PRIMING: Stir each side separately to ensure that no separation has occurred, then mix all of PartAwith all of Part B. Use a mixing paddle in a slow -speed electric drill motor. Avoid air entrapment. Mix 2 to 3 minutes until a homogenous blend is achieved. Wait 15 minutes before applying. Apply primer at a rate of 300 square feet per gallon. Avoid puddles or ponding the primer and do not apply primer over stripe coats. Allow primer to dry for 1 hour minimum, 8 hours maximum. Primer is sufficiently dry when it is somewhat tacky but will not transfer when touched. In the event coating is not applied within the maximum time, reprime. BASE COAT APPLICATION: Do not apply coating over joints greater than 1" wide. Wipe stripe coats to remove any dust or contamination. Apply CCW -501 in one uniform coat at the rate of one gallon minimum per 60 square feet or as needed in order to obtain a minimum thickness of 26 wet mils/ 22 dry mils. Allow the base membrane to cure 16 hours minimum at 75°F. TOPCOAT APPLICATION: Apply CCW -503 in one uniform coat at the rate of one gallon minimum per 100 square feet or as needed in order to obtain a minimum thickness of 16 wet mils/ 11 dry mils. Immediately broadcast 30-65 mesh silica sand into the wet Top Coat at a rate of 8 to 10 lbs per 100 square feet. Backroll to encapsulate the sand. Allow the CCW -503 to cure for 48 hours before opening the deck to traffic. All fluid applied product application rates are based on theoretical coverage relative to the percentage of solids in the material. -These are minimum application rates to achieve the required dry film thickness for the system and do not account for substrate condition or porosity. A thicker application of the product may be necessary to achieve the required dry film thickness for system relative to the substrate. LIMITED WARRANTY Carlisle Coatings and Waterproofing, Incorporated (Carlisle) warrants this product to be free of defects in workmanship and materials only at the time of shipment from our factory. If any Carlisle materials prove to contain manufacturing defects that substantially affect their performance, Carlisle will, at its option, replace the material or refund the purchase price. This limited warranty is the only warranty extended by Carlisle with respect to its materials. There are no other warranties, including the implied warranties of merchantability and fitness for a particular purpose. Carlisle specifically disclaims liability for any incidental, consequential, or other damages, including but not limited to, loss of profits or damages to a structure or its contents, arising under any theory of law whatsoever. The dollar value of Carlisle's liability and buyer's remedy under this limited warranty shall not exceed the purchase price of the Carlisle material in question. 900 Hensley Lane -Wylie TX 75098 C 800-527-7092 - www.carlisle-ccw.com coatings s waterproofing Carlisle is a trademark of Carlisle. 0 2008 Cad4le. 6003 10 CCW SOI 106/09 PRODUCT SPECIFICATION 1. PRODUCT NAME ICYNENE LD -C-50' ICYNENE LD-C-50TM is a trademark for light density, open celled, flexible, 100% water -blown polyurethane foam insulation manufactured by Icynene Inc. ICYNENE LD-C-50TM spray formula is a 0.5 lbs/ft3 density, free rise material. 2. MANUFACTURER ICYNENE LD-C-50TM is made on-site from liquid components manufactured by Icynene Inc. Installation and on-site manufacturing is supplied by independent Icynene Licensed Dealers. 3. PRODUCT DESCRIPTION ICYNENE LD-C-50TM, the "classic" light density formulation of Icynene has been installed in buildings since 1986. Icynene is the pioneer of high yield, 100% water -blown polyurethane foam technology for air -sealing and insulating buildings. ICYNENE LD -C-5011 insulates and air -seals in one step for maximum energy conservation while minimizing the environmental impact during manufacturing and construction. Significantly reducing air leakage means ICYNENE LD-C-50TM contributes to a healthier, quieter and more comfortable indoor environment, while reducing energy consumption and related greenhouse gas emissions by as much as 50%.. ICYNENE LD-C-50TI is an effective vapor permeable air barrier material that can move with the building to maintain the air barrier characteristic against energy -robbing air leakage for the life of the building. Convective air movement inside wall cavities is virtually eliminated, providing more uniform temperatures throughout the building. The result is superior quality construction, with higher comfort levels and lower heating and/or cooling costs. Energy savings will vary depending on building design, location, etc. ICYNENE LD -C -50T1 is applied by spraying liquid components onto an open wall, crawlspace, ceiling surface or cathedral ceiling. There it expands approximately 100:1 in seconds to provide a flexible foam blanket of millions of tiny air cells, filling building cavities, cracks and crevices in the process. It adheres to most construction materials, sealing out air infiltration. Excess material is easily trimmed off, leaving a surface ready for drywall or other code - compliant finish. 4. TECHNICAL DATA (Based on Core Samples) Thermal Performance Thermal resistance (ASTM C518) - R/in = R3.7 hr. ft' °F/BTU Average insulation contribution in a full fill stud wall: - 2"x4"=RI3 2" x 6" = R20. ICYNENE LD-C-50TM provides more effective performance than the equivalent R -value of air permeable insulation materials. ICYNENE LD-C- 50TM is not subject to loss of R -value due to aging, windy conditions, settling, convection or air infiltration; nor will it'be prone to traditional moisture intrusion via air leakage. A FACT SHEET with R -value data is available upon request. Air Permeance/Air Barrier /Air -Seal ICYNENE LD-C-SOTM fills any shaped cavity, and adheres most construction materials, creating assemblies with very low air permeance. Additional interior or exterior air infiltration protection is subject to applicable codes. Air permeability of core foam: ASTM E283 data - 0.009 L/s•m2 @ 75 Pa for 3.5" Air permeability of a 2" x 6" wood framed wall assembly: ASTM E 2178 data - 0.01 L/s•m2 @ 75 Pa for 5.5" All buildings insulated and air -sealed with ICYNENE LD-C-50TM must be designed to include adequate mechanical ventilation/ outdoor air supply. See ASHRAE Standard 62 — Ventilation for Acceptable Indoor Air Quality. Water Vapor Permeance ICYNENE LD-C-50TM is water vapor permeable and allows moisture to diffuse through the insulation and dissipate from the building envelope. Water vapor transmission properties: (ASTM E96 Desiccant Method) - II perms @ 5.5" In those situations that warrant a vapor retarder,, a supplemental layer of polyethylene may be used. ICYNENE LD -C -50TH - USA Alternately, low vapor permeance paint either directly on the foam or as a primer for the interior drywall may be used. Water Absorption Properties Water can be forced into the foam under pressure because it is open celled. Water will drain by gravity, given favorable drying potential, and upon drying all chemical and physical properties are fully restored. Acoustical Properties Performance in a 2" x 4" wood stud wall: STC Sound Transmission Class - 37 Hz. Freq. 125 250 500 1000 2000 4000 ASTM E90 19 30 31 42 38 46 NRC Noise Reduction Coefficient - 70 Hz. Freq. 125 250 500 1000 2000 4000 ASTM C423 .11 .43 .89 .72 .71 .67 Burn Characteristics ICYNENE LD -C -50TH is a combustible product and is therefore, consumed by flame, but will not sustain flame upon removal of the flame source. It leaves a charred foam residue. It will not melt or drip. ICYNENE LD-C-50Tm is subject to all applicable National/State and County building codes regarding fire prevention. Requirements for Thermal Barrier and Ignition Barrier coverings must be met as per the applicable building code having jurisdiction. U.S. Fire Testing Surface Burning Characteristics of (ASTM E84) @ 5" Thickness Flame Spread <25 Smoke Development <450 *Flame spread rating not intended to reflect hazards under actual fire conditions. Electrical Wiring ICYNENE LD-C-50TM has been evaluated with hot 14/3 and 12/2 residential wiring (max. 122°F). It is chemically compatible with typical electrical wiring coverings. Note: For any insulation of knob and tube wiring, please reference local electrical code. Corrosion ICYNENE LD-C-50Tm did not cause corrosion when evaluated in contact with steel at 120°F and 85% relative humidity conditions. Plastic Piping ICYNENE LD -C -50TH is compatible in direct contact with CPVC piping systems, as per Paschal Engineering Study for the Spray Polyurethane Foam Alliance. Bacterial or Fungal Growth and Food Value Independent testing conducted by Texas Tech University has confirmed that Icynene is not a source of food for mold; and as an air barrier, Icynene reduces the airborne introduction of moisture, nutrients, and mold spores into the building envelope. Environmental / Health / Safety ICYNENE LD -C -50TH is 100% water -blown and therefore contains no ozone-depleting blowing agents. It is also PBDE-free. It has been thoroughly evaluated for in-situ emissions by industry and government experts. VOC emissions are below 1/100th of the safe concentration level (TLV) within hours following the application of ICYNENE LD -C -50TH Proper handling and use is required to avoid exposure to reactive chemicals in their unreacted state. For more information, contact the Spray Polyurethane Foam Alliance or the American Chemistry Council. Newly insulated areas have been shown to be safe for occupancy 24 hours after installation is complete. ICYNENE LD -C -501'M is CHPS E.Q. 2.2/Section 01350 Compliant and listed as such in the Collaborative for High Performance Schools (CHPS) Low Emitting Materials (LEM) Table. Under LEED guidelines, products that are CHPS E.Q. 2.2/Section 01350 Compliant are considered Environmentally Preferable Products. The reaction used to create ICYNENE LD -C- 5011 generates Carbon Dioxide to expand the foam. Carbon Dioxide has a very low Global `Warming Potential [GWP of 1). Not intended for exterior use. Not to be installed within 3" of heat emitting devices or where the temperature is in excess of 200°F, as per ASTM C411 or in accordance with applicable codes. �� KYNENEn HEALTHIER, QUIETER, MORE ENERGY EFFICIENT - Telephone: 905.363.4040 Toll Free: 800.758.7325 Facsimile: 905.363.0102 Website: www.lcynene.com. E-mail: inquiry@lcynene.com SL -200-04 — March 2010 5. INSTALLATION ICYNENE LD -C -501H is installed by a network of Licensed Dealers, trained in the installation of ICYNENE LD -C -50TH. Installation is generally independent of environmental conditions. It can be installed in hot, humid or freezing conditions. Surface preparation is generally not necessary. Within seconds, the foaming process is complete. For information on Health and Safety, refer to the Spray Polyurethane Foam Alliance Health and Safety guidance documents at www.spraypolyurethane.com 6. AVAILABILITY Check regional Yellow PagesTM or contact Icynene Inc. at 800-758-7325 or our website at www.icynene.com for a local Icynene Licensed Dealer. 7. WARRANTY WHEN INSTALLED PROPERLY IN ACCORDANCE WITH INSTRUCTIONS, THE COMPANY WARRANTS THAT THE PROPERTIES OF THE PRODUCT MEET PRODUCT SPECIFICATIONS AS OUTLINED IN THIS PRODUCT SPECIFICATION SHEET. SAVE AND EXCEPT ANY EXCLUSIONS REFERENCED IN THE WARRANTY. 8. TECHNICAL Icynene Licensed Dealers and Icynene Inc. provide support on both technical and regulatory issues. Architectural specifications in CSI 3 -Part format and design details are available upon request.. 9. .REGULATORY ICYNENE LD -C -50TH has been tested as per the requirements of the International. Code Council — Evaluation Service's AC377 Acceptance Criteria Uune 2009). The following evaluation reports apply to: this product: - ICC ESR -1826 - IAPMO ESR -0165 ICYNENE LD-C-50TM - USA Based on the 3rd party test evidence submitted, this product was found to comply with: - IRC — 2006 — 2009 - IBC — 2006 _ 2009 - IECC — 2006 — 2009 10. RELATED REFERENCES All physical properties were determined through testing by accredited third -party agencies. Icynene Inc. reserves the right to change specifications in its effort of continuous improvement. Please confirm that technical data literature is current. 11. PACKAGING AND STORAGE Packaging 55 U.S. gallon steel drums Component 'A' 550.Ib. per drum Base Seal® MDI Component 'B' 500 Ib. per drum ICYNENE LD-C-50TM [Gold Seal®) Resin Storage Component A, Base Seal® MDI and Component B, ICYNENE LD -C -50TH Resin ideally should be stored between 60°F and 907. Component A, Base Seal®, should be protected from freezing. Component B, ICYNENE LD-C.50TM (Gold Seal®) Resin, can be frozen but must be protected from overheating 120°F and prolonged storage above 100°F. Component B, ICYNENE LD-C-50TM (Gold Seal®) Resin, may separate during storage and should be mixed thoroughly prior to use. 12. INSTALLATION SPECIFICATIONS Must be installed by Icynene Licensed Dealers. Refer to the Icynene Installers Manual for expanded information. LITEY"� 4848 E. CACTUS RD., 505-805 SCOTTSDALE, ARIZONA 85254 480/632 - 2949 OR 480/558 - 1260 FAX MADISON 'CLUB -COLONIAL LIGHTING FIXTURE SCHEDULE Type Manufacturer Desai ption Lamp A HALO H14991C-T/-1420P/`L11:1 Soft Focus Lens 50W/12V MR16 Lamp "~ 4" recessed low voltage fixture with adjustable (maximum) slot trim and integral 12V transformer a DESCRIPTION Ain An H14991C family housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H14991C:Is-for installations where the housing will be in directcontactwith insulation. The H.1499 Air-Tne housing also meets.restricted airflow requirements.The H14991C Ise suited for use in insulated ceilings in residential and commercial applications. DESIGN FEATURES A••• Outer Housing •Simply insert the Cable directly Double wall aluminum into the trap after connections construction for greater heat are made. •1 • UL Listed for through branch gasketed to prevent airflow from circuit wiring (maximum 8 heated or air conditioned spaces. No.12 ga. 90'C conductors). B• -•Plaster frame • Accommodates the following standard non=metallic + sheathed cable sizes: The housing can be removed (US) 81412, 814f3, #12/2,012/3 `r (Canada) #14/2,#14/3,#12/2 access to the junction box Plaster frame features incude: GUT D NAILI Pass -N- GOT • Regressed locking screw for Bar Hangers securing hanger bars from Bar Hanger Features include: below the ceiling•'Pre-installed nail easily installs ' r hanger bars in position lumber and laminated beams a DESCRIPTION Ain An H14991C family housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H14991C:Is-for installations where the housing will be in directcontactwith insulation. The H.1499 Air-Tne housing also meets.restricted airflow requirements.The H14991C Ise suited for use in insulated ceilings in residential and commercial applications. DESIGN FEATURES A••• Outer Housing •Simply insert the Cable directly Double wall aluminum into the trap after connections construction for greater heat are made. dissipation. H14991C housing is • UL Listed for through branch gasketed to prevent airflow from circuit wiring (maximum 8 heated or air conditioned spaces. No.12 ga. 90'C conductors). B• -•Plaster frame • Accommodates the following standard non=metallic Galvanized steel construction. sheathed cable sizes: The housing can be removed (US) 81412, 814f3, #12/2,012/3 from plaster frame to provide (Canada) #14/2,#14/3,#12/2 access to the junction box Plaster frame features incude: GUT D NAILI Pass -N- GOT • Regressed locking screw for Bar Hangers securing hanger bars from Bar Hanger Features include: below the ceiling•'Pre-installed nail easily installs Six cutouts for easily crimping in regular lumber, engineered hanger bars in position lumber and laminated beams • Halo name embossed on • Safety and guidance system plaster frame - prevents snagging, ensures SLIDE -N SIDE^' Junction Box smooth straight nail penetration and allows bar • Four 1/Y'trade size conduit hangers to be easily removed if knockouts with true pry -out necessary. slots positioned.to • Automatic levelling flange accommodate straight conduit aligns the•housing and lets you runs• hold the housing in place with • Slide=N-Side wire traps one hand while driving nails allow non-metallic sheathed • Housing can be positioned at cable to be installed without any point within 24" joist span tools and without removing • Score lines allow "tooless" knockouts. Accepts a wide shortening for 12•' joists range of non-metallic . Bar hangers maybe' sheathed cable' repositioned 90' -Allows connections to be made . Bar hangers do not need to be outside the junction box t.. `1 14 /Ulu � r j removed from frame for shortening -Integral T -bar clips snaps onto T -bars - no additional clips required E --- Transformer 120V Integral magnetic transformer steps line voltage down to Iamp operating voltage. G•••Thermal Protector Self resetting thermal protector deactivates fixture if overheating occurs due to improper tamping. Labels • UL1cUL Listed forDamp Location • UUcUL listed for Feed Through • UUcUL listed for Direct Contact with insulation and combustible material Meets following requirements: • State of Washington Energy Code • California Title 24 Low efficacy luminaire IC and AT requirements • International Energy . Conservation Code (IECC) • New York State Energy Conservation Code (NY -ECC) Certified under ASTM -E283 for air tight construction - x912' 1114-1 CN14q CWro'W 'Top View a.1R' l2atmml 13• I356mm4 rr% ;Y- �f H14991C 4" Insulated Ceiling A(R•TITE - Low -Voltage Recessed Housing 4" TRIMS FOR USE IN INSULATED CEILINGS FOR DIRECT CONTACT WITH INSULATION aha; _ .. with all trims listed Ready For Installs . UPGRADE FEATURES: • SLIDE-NSIDE" JUNCTION BOX • GOT NAIL[* BAR HANGERS • PASS -N -THRUM BAR HANGERS • REGRESSED LOCKING SCREW • HALO ID ON PLASTER FRAtNE- LITEM. A Trim s RAW' DESCRIPTION Adju4table Slot Aperture trim for:1'2V low voltago 4" Nl'499 family'regessad housings. l amp tilt 35?. Die,casttrim ring available in a varlety of finlsAesr: fibrae cat's paw" springs secure frirn'ln housing. ^ D I ES . I I GM FEATURES Cas't_aIuminum Vlm'rlrig avaIla blein Matte White, §slyer Satin Nidwl .• Antique Copper,or,'; Ct Tuscan'BronZe nnl lis. Slot tuaperreprovidesadjustablelampalrrdn'gwithacleanD ceiling presence Throe preSatinisprings.ensure positive retention In housing" ' . _ 1420 is designed for.use.with.the following small aperture housings; Llno`Voltage.Housing ' i1A1499T.- '60W12VMR16 j H1499RT: 6OW 12V MR16 1420P, 014991CT 60W'12VMR16,WtiitaT'rim H1499T76 76W 12V MR16 1420SL' Silva r Tr1 m` - i2 -t/8 xl•319 - r _ 153x53Smm1 t 6-1116 11 2srnrn) 1420SN ?;Satin Nlckol Trim t 142.OAC Aniiqua Copper.Trlm Trim 142OP- White`Trim. 142OSk`SII4ar Trim' r t420SN Satin Nlac ctrim - 1426AG Antique CopperTrirn'; r 1620TBZ TuscenBrorizeTrNm' ;142OTBZ T ' Tuscan BionZe*km. - ing ' 1420 "uiaabl6'Slot Aperture' ''4'�TR-1M•S LITE AM HALO/, HI499ICT/LC105/'Lt I I Soft*Focus Lens SOW[I 2V MR16 LAMP CAPRI 4" recessed L.V. fixture with adjustable mirror trim HALO* DESCRIPTION An H14991C family housing with an integral low voltage transformer that supplies •12 volts to MR16 lamps. The "H14991C is for installations where the housing will be in direct contact with insulation: The H1499 Air -rite housing also meets restricted air flow requirements.The H14991C is a suited for use in insulated ceilings in residential and commercial applications. DESIGN FEATURES A••• Outer Housing •Simply insert- the cable directly removed from frame for Double wall alurninum into the•trap after connections shortening construction for greater heat are made. • Integral T -bar clips snaps onto dissipation. H14991C,housing is • UL Listed for through branch T -bars - no additionalclips gasketed to:prevent airflow from circuit wiring (maximum 8 required heated or air conditioned'spaces. No.12 ga:, 901C conductors). E•••Transformer B ---Plaster Frame • Accommodates the following standard non-metallic 120V Integral magnetic Galvanized steel construction. sheathed.cable sizes: transformer steps line voltage The housing can be removed (US) f214/2, 814/3,•#12)2, #12/3 down to )amp operating voltage. from plaster -frame toprovide (Canada) 814)2,814/3,,412/2 G•••Thermal Protector access to the junction box. Plaster framefeaturesinclude: O ... GOT NAILI Pass -N- Self resetting -thermal Protector •Aegressedlocking 'screw•for ThruTM 'Bar Hangers deactivate s:fixtu re if overheating securing hanger bars 'from BarH'anger.Features include: occurs due to improper lamping. below the ceiling •'Pre-installed nail easily installs Labels • Six cutouts for easily crimping in regular lumber,- . UUcUL Listed for Damp hanger'bars in position lumber and laminated beams Location Halo name embossedon • Safety and guidance system . UUcUL listed:for Feed Through plasterfrarne prevents snagging, ensures • UUcUL!listedfor'DirectContact SUDE-N-SIDE' Junction Box smooth straight nail penetration and allows bar with insulation and combustible • FoLr 1/Z' -trade size conduit hangers to be easily removed if material' Meets' following requirements: knockouts with true pry -out slots positioned to necessary. • Automatic levelling flange • State of Washington Energy accommodate straight conduit aligns the housing and lets you Code . California Title 24 Low efficacy runs. • 'Slide -N -Side'" wire traps hold the housing In place with one hand while driving nails luminaire 1C and AT allow non-metallic sheathed • Housing can be positioned at requirements •'International Energy cable to be installed without any point within 24" joist span Conservation Code (IECC) tools and without removing knockouts. Accepts a.wide • Score lines allow "tooless" • New York State Energy range of non-metallic shortening for 17' joists • Bar hangers maybe Conservation Code (NY=ECC) ; sheathed cable. repositioned 90' Certified under ASTM -E283 for air tigfit construction -Allows connections to be made • Bar hangers do not need to be outside the. junction box G.................................................................. 41/2- 1114mm1 Ceiling `, opening -Kilo, `+ Ad'uskbb Mirror tlgld LAOS Spread Rafladx lrxk-&dl W-90.,rn A-3/4. O.D.(121'mm) w ' A Top Vta.w >. g 12• 12I41mml 13• .� PUn ml H14991C 4":Insulated' Ceiling AIR-TITE tow -Voltage Recessed Housing 4" TRIMS FOR USE .IN INSULATED CEILINGS FOR DIRECT CONTACT WITH INSULATION with all trims listed Olea"cty, lnstaJla#o UPGRADE FEATURES: • SLIDE -N -SIDE" JUNCTION BOX - • GOT NAILI- BAR HANGERS • PASS4&THRU— BAR HANGERS REGRESSED LOCKING SCREW • HALO tD ON PLASTER FRAME LITElFw' . r. F .1 B HALO/ , H1.499lCT/1419P/,LR-0202 Hexce[ Louver5OW/12V MR16 Lamp w NIGHTSCAPING •" 4" recessed 'low voltage fixture with adjustable (maximum) pinhole trim and integral 12V transformer '., HALO' • DESCRIPTION_. s ' An H14991C family 'housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H14991C is -for installations wherethe housing will be in direct contact with + insulation. The H9499Air-rite housing also meets restricted airflow .: requirements.The H14991C is a suited for use in insulated ceilings in residential and commercial applications. DESIGN FEATURES,. A•:• Outer Housing •Simply insert the cable directly removed from framefor Double wall aluminum into•the trap after connections shortening construction for greater heat are made. • Integral T -bar clips snaps onto dissipation. H14991C housing is ' UL Listed for through branch T -bars - no additional clips Basketed to prevent airflow from circuit wiring (maximum 8 required heated or air conditioned spaces. No.12ga.,9D°Cconductors). E ---Transformer 8•••Plaster.Frame • Accommodatesthe•following standard non-metallic 120V Integral magnetic Galvanized steel construction. sheathed cable sizes: transformer steps line voltage The housing can be removed (US) 014/2,0114/3,012t2,412/3 down to lamp operating voltage. from plaster frame to provide (Canada) 414/2,414/3,412/2 G•••Thermal Protector access trthe efeat re box Plaster frame features include: D•••GOT NAILI Pass -N- Self resetting thermal protector • Regressed locking screw -for Thru— Bar Hangers deactivates fixture if overheating securing hanger bars from Bar Hanger Features include: occurs due to improper tamping. below the ceiling -Pre-installed nail easily installs Labels • Six cutouts for easily crimping in regular lumber, engineered . UL/cUL Listed for Damp hanger bars in position lumber and laminated beams Location • Halo name embossed on • Safety and guidance system • UL/cUL listed for Feed Through plaster frame prevents snagging; ensures - UUcUL listed for Direct Contact SUDE-N-SIDEI Junction Box smooth straight nail penetration and allows bar with insulation and combustible • Four 1/Z'trade size conduit size Four 1 Z'tradeouts hangers to be easily removed if material Meets following requirements: with knocpry-out slots positioned to necessary. Automatic levelling flange a State of Washington Energy I accommodate straight conduit aligns the housing and lets you Code • California Title 24,Low efficacy pins. • Slide;N-Side- wire•traps hold the housing In place with one hand while driving nails luminaire IC and AT allow non-metallic sheathed -Housing can be positioned at requirements • International Energy cable to be installed without any point within 24 joist span Conservation Code (IECC) tools and without removing knockouts. Accepts a wide • Score lines allow "tooless" ;-New York State Energy range of non=metallic shortening for 12" joists - • Bar hangers maybe Conservation Code (NY -ECC) sheathed cable. repositioned 90' Certified under ASTM -E283 for air tight construction -Allows connections to be made Bar hangers do not need to be outside the junction box G...........:............................................ a......., - 1141W Owron Cede • 9 e , � 1�a• 1186mm1 I View 91x2• [241mml 19' [9b6mm1 H14991C 4" Insulated Ceiling AIR -TITS Low -Voltage Recessed Housing 4" TRIMS FOR USE IN , INSULATED CEILINGS FOR DIRECT CONTACT WITH INSULATION with all trims listed Ready For fnstallatio, UPGRADE FEATURES: • SLIDE-NSIDE- JUNCTION BOX • GOT NAILI— BAR HANGERS iPASS-N-THRU" BAR HANGERS REGRESSED LOCKING SCREW - HALO ID ON PLASTER FRAME •DESCR.IP.TIO.N- - - Anhole Ba$la'trim for2V lowvoltage 4'.H1499�famlly,recossed housings.,'.. - Die'cast trim rindwith baffle. Trlm ring_evailable_ln a variety of finishes p ..sp ngs senna trim fn dousing..'"'"' ., �.. `".�... ✓ TAnae.`cat's ew" ri r - r f,DESIO_N4tATURfiS.. 'Cast aluminum trim ring avallable in Matte White; Sliver,'•Sattn Nickel,% - :. 'Antique Copper or Tuscan Bronze flnlshes. Baffle avatiablo In Black:or --�� - -"` •.- White Three pressure springsensure, pos, tive retention in hou Ing; 1419 is designed for use with the following small aperture housings; . Line Voltage Housing .:- H1499T ;SOW 12V MR16 H1499RT SOW 12V MR18 1419P 1419W H1499107 .-SOW-12V MR16 Black Baffle with Whim Baffle with yH1499T75 ,75W-12VMR16 WiltoTrlinRinp ;WhlteTrim Hing 1419SL 1479SN Bleck:Baffle with Biack Baiflewith •� i$IlverTrimRing ,Satin Nlcket TrImR,Ing - _ _ .. ' -. �: 1 718". � •. �'" ' r � �, - , � 148mm1 - • • I129mm1 s 1;419AC _ 11419TBZ _ Black,Baffie.witli �Black.6affle'wlth • Antique Cap perrTrim Ring ' Tu can Bronze Trim ll P.enhole.8idi iltim 4' TRIMS ' 1419P.. Mack Baffle; White Trlm Ring F t t "-1419W=White$effie,WhiteTrim 'Ring r • 1419SL=Black$afflle, Silver Trim Ring ' W , • • 419S"'Black Baifla, Satin Nickel Trim All 1419AC� Black Battlq, Antiquo Coppa� Tdim: A ng v 1419792.. Black _.affic; To, BronieTrirn Ring F LITE C/C1HALO H991CT/,,999CG m C:50R20/FL 4" recessed IC -rated 'i'ncandescent fixture with C1:50PAR20/FL internal specular trim In champagne; halogen lamp .,DES CRIPTIO,N'• The H991CT.is a small aperture housing for accent•and-task lighting. It is designed' for use in insulated ceilings where it will be in direct contact with insulation. It is an AIR-TITE housing designed to prevent airflow'betweenliving spaces and'unconditioned areas. DESIGN FEATURES HALO' A Outer'H'ousing sheathedcable - the standard removed from frame for Aluminum construction helps cablettyyppes used in lighting for shortening dissipate heat: both U.$. and Canada. Allows wiring connections to •Integral T -bar clips snaps onto B••. Inner Housing be made outside the T -bars - no additional clips Double wall aluminum junction box required construction helps dissipate Simplyinsert,the cable F ••• Socket heat. The.innor housingdirectly can be into the trap after connections are made Fixed position porcelain socket adjusted in the p pilaster frame to -accommodates the following with nickel plated brass screw compensate for differentceiling standard non-metallic shell provides consistent lamp materials. sheathed cabletypes: positioning: C•••Plaster Frame (US)814/2,S14r3,81212,#12/3 (Canada) 014/2, 01413,1112/2 G ... Thermal Protector Galvanized stool construction. Self resetting thermal protector The housing can be removed E•••"GOT NAIL1 Pass -N- deactivates fixture if, from plaster•frameto:provide Thru— Bar Hangers overheating occurs due to accessto the junction box. BarWanger Features improper lamping. Plasterframefeatures'include: include: Labels • Regressed lockingscrew,for •Pre-installed nail easily installs securing hanger bars from in regularlumber, engineered • UL/cUL Listed for,Damp below the ceiling lumber and laminated beams Location • Six cutouts for easily crimping - Safety and guidance system • UUcUL listed for Feed Through hanger bars in position prevents snagging, ensures ' UL/cUL listed for Direct Contact • Hato name embossed on smooth straight nail % ith Insulation and combustible material plaster frame penetration and allows bar hangers to be easily removed PAoots following requirements: 6• -•Junction Box it necessary. • California Title 24Low Efficacy • Listed for through branch . Automatic level ling flange Luminaire IC and AT circuitwiring • Positioned to accommodate aligns the housing and lets you requirement • State of Washington Energy straight conduit runs hold the housing in place with Code e Seven 112" trade size conduit one'hand while driving nails • International Energy 'knockouts with true pry -out' slots •'Housing can be positioned at any point within 24" joist span Conservation Code • Slide -N -Side'"_ wire traps . Score lines allow "tooless" • New York State Energy allow non-metallic sheathed shortening for 12" joists Conservation Code (NY,ECCC) cable to be, instal led without . Bar hangers maybe • Certified under ASTM -E283 for tools and without removing repositioned 90" air -tight construction knockouts. Accepts a wider range of non-metallic .gar hangers do not need to be B................ lI3amm1 ---) .....' O --------- o Lo o O ZZ 11 rim frl. 4114" _ lloa,dnl. Top Vi&W [lazmml a 111" . 121amm1. H991CT 4" insulated Celling AIR-TITETM Recessed. Housing 4" TRIMS FOR USE IN' INSULATED CEFLI,N'GS FOR DIRECT CONTACT WITH INSULATION with all trims listed Ready Forfnstallallo. _ - ••DESCRIPTION- • • : Reflector trim for A20V line Voltage 47 H99.tan iy recessed housings. Die cast -trim ring with metal reflector. reflector and trim ring availableino variety of • hous - Three 'cat a pant -' • - _ .. ' springs severe trim "vi :DESIGN'PEATURES" Cast aluminum trim ring available in Matte White, •Satin Nickel Antique :.! Copperor Tuscan Bronze finishes., Reflector availabte In Clear - „••�•�"�',�„� _ -+ SpecuWr, Gold Black Haze,'Satin Nickel Antique Copper and Tuscan t IIi % �� •� • Bronze -Three Dreosure springs ensure positive retention In ttousung I '.989 Isdesigned fofluse vAth the tonowing amallaperture tmusings; — ' - • Une Votiaga Moirsing _ - - • 99T `. 40W A16, 40W A19, EOW R20, SOW PAR20 -.999 _ ,999SL ;H99RT .40W R16:4OW A19, 50W R20, SOW,PARYO: ,Clear Spicular Retlpctor with Clear SpequlacRofiector.with .. H991CT 40W R16, 4OW A19, SOW R20, SOW PAR20 White trim Ring Sllvor-Trim Ring t _ w•*""�""`-�=--yam., , _" - � v - � • 1 ': � 'L �, r 1. 999RG t999P ♦ Gold Specular Reflector VvM ,Haze reflector• Wh Whit; Trim Ring White Trim Ring . . • � - 61!16' ,. ,1129mml , . _ 999M6 ;999AC ' BlagiSpcwlbrRoiiectorwith tAntiquoCopper Reflector with - - White Trim Rin � - .•, - 0 `Antigua Copper'Trlm;Ring r' 999M B 999MB , �T SatInNickel Reflector with TddciiiBronii Reflactorwith • `: Satin Nickel Trim Ring ' -,.Tuscan BeonzcTrim Ring 9.99 099 Clear Spoeular Reflector Whtte Trlm Ring - i Reflector Trim ' 999RG, Gold Specular Rdlocto% White Trim king. 9991MElBlack SpecularRatloctor, Wh ie Trlm Ring. .4' TRIMS 999H.Maze`Retlector,WhltoTrlmAing, .••- • , 999SL=ClearSpecutarReflector,'SfIVerTrimRirip �999SN= Seflri klckel R.Aacior Satin Nickel Trim _Ring , • 899AGAmIqupp eCoorReflector,AritlquoCopper,Trlmfling. - ., .. < - 899T62 Tuscan Bronze Reflector Tuscan Bronze Tri m'Ring r • ' I ' 4 LITE CF IRIS OSM32TE-STG So open reflector compact fluoresent downlight with specular trim in gold IRIS CATALOG#: TYPE: DESCRIPTION, -F—Eloctricat Specification grade 32 Watt triple tube compact flu- color,'long life, and low radiant heat. Dimming and orescent fixture rated for direct, contact with insula- emergency ballast options are available. Lamp tion. The 50° cutoff to lamp and lamp image pro- module and optical element can be changed after vides a glare free, smooth, medium beam installation to provide a variety of lamp sources distribution. Triple tube lamps provide excellent and distributions. e.g. into a PAR36 adjustable I>..._.. H._...-. A:..._.. A•••Reflector -F—Eloctricat .040 thick aluminum spun parabolic reflector in Keyed quick connect provides easy lamp module iridescence4ree Clear, Gold, Haze, Warm Haze installation. Alzak• or painted Gloss White finish. Special cone G•••Frame/Housing colors listed below Hot dipped galvanized 20 gauge steel frame a... Fiange with built 1/2 inch plaster lip. Gunsights allow Self flange reflector or die-cast flange with either -for consistent alignment. Aluminum .032 thick matte white or clear coat finish. Die-cast flanges housing allows fovheat dissipation and reduces are easily removed forfield,painting. Elements weight. are keyed for proper insertion. H•••June-Pon Box C•••Attachment 18 cubic inches, listed for 4#12 AWG or 6814 AWG Positive torsion springs pull flange tight to �W C additional feed through conductors, has six ceiling. Mechanicallight trap eliminates spill light 1R inch pryouts. at edge of flange or reflector. 1 ... Bar Hangers D•••Socket No Flex* bar hangers with positive locking, for 4 pin G24g3 base for 32W PLT, TBX and TTT use with wood; engineered wood and steel frame lamps. Fatigue free stainless steel spring ensures joists spaced up to 24. O.C. ship with platform for positive lamp retention. Fixed socket height use in T -bar ceilings order accessory MBCLP clips. ensures consistent lamp position. Nailess barb and locator lip provide consistent E•••Electronic Ballast 'installation height. Thermally protected, current controlled electronic codes ballast produces full light output and rated lamp Thermally protected, IP labeled, for use in direct life. For 32W and 26W triple tube lamps. Provides contact with insulation. Meets Washington State flicker -free and noise -free operation and starting Airtight requirements, 1995 CABO Model Energy with 120 or 277 volt input. Meets stringent Class B Code. requirements, FCC part 18, for non-commercial Labels applications. M32T Lutron for use with 32W lamp UL and cUL listed, standard damp label, only. 11BEW union made. Comp Wouniteonalstaofa pherom, Flange Lamp Platform Module P5 M32T pfi�5' M32T-=26W Airtight IC -Compact 'Retod Fluoroscent Housing ` Ballast M32TLutron- .32W Tb wire ..Dimmable Ballast COOPER LIGHTING maQuOe ond:eam.nt ptiical. --t 32W Triple CFL/35000K Finish Flange Accessories 1229mml W- Isto-.[.1 'MBCLP-40 Push Stemdard- Custom Cont. Blank.Whtto C.Cloar CCH.Chocolate dls-cast • On T Bar Clips H.Hezo Haze , SF - Sall (for 10 Units) G -Gold BU.Blush Flange 1 PLEBwPlastor WMH.Wann Haze BUH.Btush Haze RAW -Natural up Extension W.Gloss White GP*Grephlte ' Die-cast -. for Max 2' Thick MW.Matto Whlto GPH_Graphlte SFWF.Salf ling Haze Flange FMCS- Flush Custom PIN1141ne paintedMount Collar K-Cognec - no Haze . White IOf.COgnec Haze SV.sSk For ll mrgencY Option SK-SkY order Pt:32TEMER and CC -Chocolate - EST_ see catalog :for ordering Information. For SKH-Sky Haze addltbrul optiom please It factory. 5 Vi P5 M32T E5T 32W TRIPLE Compact.Fluorescent 5' DOWNL'IGHT a�7Qotmml.Ra cemg cutore s yr ps9mm ENERGY DATA M32T Input Power. 120V . 36W Input Current (Max): 120V ..306A Power Factor. 120V > M T.H.O.: 120V - <-10tt M32T Lutron Input Power: 120V . 36w Input Current (Max): 120V - .33A Power Factor. 420V . > M T.H.D.: 120V -. 204E AD1030702 1229mml W- Isto-.[.1 a�7Qotmml.Ra cemg cutore s yr ps9mm ENERGY DATA M32T Input Power. 120V . 36W Input Current (Max): 120V ..306A Power Factor. 120V > M T.H.O.: 120V - <-10tt M32T Lutron Input Power: 120V . 36w Input Current (Max): 120V - .33A Power Factor. 420V . > M T.H.D.: 120V -. 204E AD1030702 LITE DF IRIS P7/,,M32TLutron/,E7TG 32W Triple CFL/3500°K 7" open reflector compact fluoresent downlight With, specular trim in gold and dimmable ballast IRIS CATALOGS: TYPE: DESCRIPTION Specification grade 42 Watt triplia tube compact color, long life, and low radiant heat. Unit can fluorescent fixture rated for directcontact with be relamped from above. Lamp module and insulation. The 80• cutoff to lamp and Tamp image optical element can be changed after installation provides is glarefree, smooth, medium beam to provide a variety of lamp sources end distribution. Triple tube "lamps provide excellent distribution. e.g. into a PAR36 adiustable, .....:..�..:._................0 O- ....:................:....-_ f..._. .......... ..„� tA. ......... . _. ;Q., ........ . 0� o•..._...•. .:...:.......... ......... rr � s 3.4•• . (172mm1 7 3.4.• 9vr . SPECT€.I.CATION FEATURES 1210-4 A•••Reflector. F•••Electrical ' :010 thick aluminum spun parabolic upper and lower Keyed quick connect provides easy lamp module reflector. Upper reflector isspecular ctear,-lower installation. reflectorevailable'i iridescentfreeClear, Gold,Name, a'Frome/Housing Warm "Size Ahaka, or painted gloss white finish. Special cone colore'listed below � dipped galvanized 20 gauge steel frame with 'rated built in 112 inch plaster lip. Gunsights allow for 8 ... Flange consistent alignment Aluminum .032 thick 'Self flange reflector or die-cast flange with either housing allows for heat dissipation and; reduces matte white or clear coat finish. Die-cast sflanges weight. Top is removable for above ceiling access are easily removed for field`painting. Elements are H•••Junction Box keyed for proper insertion 18 cubic inches,disted-for 4412 AWG or 6,#14 AW C Attachment 90• C additional food through conductors, has six Positive torsion springs pull flange tight to 1/2 inch pryouts. ceiling. Mechanical light -trap eliminates spill I ... Bar Hangers light at edge of flange or reflector. The two reflectors are keyed for top retamping. No Flex* =bar hangers with .positive locking, for u ,KarCognac with wood; engineered wood and steel frame D ... Socket joists spaced up to 2W O.C. ship with platform. 4', pin G24g4 base for 42W PLT, TBX end.TTT For use in T -bar ceilings order accessory MBCLP lamps (G24g3 for 32W lamps). Fatigue=free clips. Nailess barb and•'locator lip provide consis- stainless steel sprang ensures positive lamp tent installation height retention. Fixed socket height ensures consistent Codes lamp position. Thermally protected; IP labeled, for use in direct E•••Electronic Ballast contact with insulation. Meets Airtight require - Thermally protected; current oontroDad reps start menta, 19148 CABO Model Energy Code. ballast produces full light output and rated lamp •Label% fife. Provides flicker -free and noise -Free operation end'starting with 120 or 277 volt input. Meets strin- UC end cUL listed; standard damp label;' Bent Class B requirements, FCC part 18, for poo - fSEW union made. MATION-.. - unit Platform Larnp .Mod'ul'e P7 S� Ts 7' Standasd 077' hl42Tm42W d.Clear AirtlgM1C Compact ;H=ffaze 'rated Ruorescent8allast G=Gold M32T-32t26W ;Compact BUH-Slush Haze 1linorascantBallast •WsGloss White !41.32TLutmn-32W 'Tu Wire.Dimmable GPH.Graphtte Haze Ballast 02W lamp MWdNatts White 'only) COOPER LIGHTING and element hent Finish. Die-cast SF -Self Flangs RAW -Natural P7 M42T M32T E7T 42W Triple 32W Triplet Compact Fluorescent 7" DOWNLI'GHT l • 1: l290j 12 VVG lo Courocut" 7 Wr (197mm) use ENERGY DATA M42T Input Power. 120V - 49W Input parent (Max:): 120V ..45A Power Factor. 120V - a .99 T.H.D.: 120V . < 10-A M32T _ Input Power. 120V - 36W Input Curren (Max): 12ov..306 Power Factor. 120V - a .99 T.H:D.: 120V - < 10% M321! Lutron Input Power. 420H. 30W tnput Current (Max): 12oV • .22A P7werFactor. 120Y _ a .66 T.H.O.: 120V . <20% Accessories MBCLP-40 Push 'On T Bar Cops (for to Unita) PLE701aster Lip Extension for Max 2' Thick :Ceiling For 6marrgg� Oppttton order PMMMER er P742 TrL R a nd.F7r� see aaralog The order. Gg idorm don.: For add i ioml optons pbaaa a—suR feutory. ADD20 03 S� Ts 7' Standasd Custom Cont: Iplellubs d.Clear CC -Chocolate twnGght dtecoor ;H=ffaze CCHsptocolafeHaze G=Gold BU -Slush WMH-Warm Haze BUH-Slush Haze •WsGloss White GP.Craphits Bilmadt GPH.Graphtte Haze MWdNatts White PNOins Custom PNH=PinsHaze ,KarCognac sk-Sky- )KH�ognacHaze SKNaSky Hue Die-cast SF -Self Flangs RAW -Natural P7 M42T M32T E7T 42W Triple 32W Triplet Compact Fluorescent 7" DOWNLI'GHT l • 1: l290j 12 VVG lo Courocut" 7 Wr (197mm) use ENERGY DATA M42T Input Power. 120V - 49W Input parent (Max:): 120V ..45A Power Factor. 120V - a .99 T.H.D.: 120V . < 10-A M32T _ Input Power. 120V - 36W Input Curren (Max): 12ov..306 Power Factor. 120V - a .99 T.H:D.: 120V - < 10% M321! Lutron Input Power. 420H. 30W tnput Current (Max): 12oV • .22A P7werFactor. 120Y _ a .66 T.H.O.: 120V . <20% Accessories MBCLP-40 Push 'On T Bar Cops (for to Unita) PLE701aster Lip Extension for Max 2' Thick :Ceiling For 6marrgg� Oppttton order PMMMER er P742 TrL R a nd.F7r� see aaralog The order. Gg idorm don.: For add i ioml optons pbaaa a—suR feutory. ADD20 03 y LITE JL . FOCUS IND., SL-24-MR16-BRT 35W/12V MR16 Lamp recessed low voltage steplight with eyebrow; (maximum) to remote 12V transformer: Fixture to be mounted y at approx. 14 inches above finished step. Specified ' in Bronze textured finish. 'SPECIFICATIONS - + 4 BACK BOX HOUSING: Heavy duty stamped aluminum with eight 1/2' knodcouts,white finish _ ►• y, —� .. FRONTCOVER Castaluminum �' Y o + LENS: Whrtehigh _impact adylrglinear spread glass for 5l-24-MRi6 i �• s ( A GASKET Black neosponge 0.190' thidt closed cell " + REFLECTOR. Highly polished specular aluminum + y. LAMP-SL24,SL-24-BRS:l8watt58 B1141(35wattmax) i :r •l'- r SL-24-MR16 5L 24-MRl6-BRS: 20 wattMR16 (BAB), (35 wattmax.) SOCKET. Single contact bayonet base (Ba t 5s) -brass nickel plated screw shell and spring (t iv ): bi-pin GU5.3 y MR16 ceramic with 25W C lead wires (12v.) • LAMPLIFE. 1200 hours average rating for 5-0 Bt 141 5000 hour average iating for MRI l WIRING. Black 5 foot 18/2 zip cord (12v onW CONNECTION: FA-05,Quick Connector (not supplied) from fixture to main cable (12/Z, 10/2 or`8/Z only ,FINISH: Optional fi_ nishes available i aL-24 ORDERING INFO_ RMATION • i r CATALOG NO. '; DESCRIPTION'+ " i2•. mmm• SL -24 - Cast aluminum step eyebrow - _ S s• _ SL -24 -OR 5 yw - Cast brass step eyebrow ry O �76.vno 'SL-24-MR16! Cast aluminum e . P eyebrow , SL-24-MR16-BRS Cast brass step eyebrow ��-- - . • SG -24 a ' L LUMIERE 203BZ/,TMOSBZ/LVR NX;4 SOW/12V MR16 Lamp beam mounted adjustable 12V landscape fixture (maximum) with tree mount canopy, hexcel louver, to remote 12V transformer LUM1EREO DESCRIPTION, Cambria 203 is an uhracompact MR18 low voltage halogen fixture. It la available with a fully adjustable side swivel atom (203,203 -FL), an adjustable center rear swivel (203-CRSi or stationary rear fluoh mount(203-FM). Various lenseo.ilouvers and color or dichroic filters can be combined - up to '. t ,throe at once - to create multiple lighting effects_ Lumiiri s exclusive Siphon Protection System (S.P.S_) prevents water"from siphoning into the fixture _ e . - through Its own lead wires_ - r•r...�.�.� SPECIFICATION FEATURES A ... Material Houaing.'hood and mounting atom are precioion-machined from corrosion -resistant 6061-T6 aluminum billet broeo. bronze. copper or stainless steel [67mmll `" e Cernbrle 'tit• .2e1 �ItaTe+1 St Swivel � 1 -lite' [ml ICentn Res SwFel l 2 [so � Ittu.;ml> cm,�eite (R -h Nk—tl - o24m^' t6744- <1 miil , a.wa iw1� V21,r tunu.d Side awl.atsbim) B ... Finish Painted Fixtures conctructed.from 0061 -TO aluminum are double protected by a chromate conversion undercoating and polyester powderccat paint finish, surpassing the rigorous demands of the outdoor environment A variety of standard colors are available. C ... Brass, Bronze, Copper or Stainless Steel Fixtures conatructed4rom brass, bronze, copper or stainless steel are left unpainted to reveal the naturalbeauty of the material - Brass, -bronze and copper will patina naturally overtime D... Hood. Hood Is removable for easy relemping and accepts up to three internI accessories stones (lances, louvers. filters) to achieve multiple lighting effects. Model 203, 203 -CRS & 203 -Plot: Weep holes prevent water and mineral stain from collecting on the Ions. even In the straight -up position. Mode( 203 -FL The flush Iona design reduces fixture length, minimizes debris collection and prevents water and mineral otains from collecting on the lona_ E ... Gasket Housing and hood. are coaled with s high temperature silicone o -ring gasket to prevent water intrusion. F --- Lens Tempered glass lens. factory coated with high temperature adhesive to prevent water intrusion and breakage due to thermal shook. a ... Mounting Stem Modal'203 and 203 -FL include fully adjustable side -mounted swivel atom. providing 340• tilt and 360• rotation for easy aiming. Center rear swivel t2Q3-CRS) or stationary, rear flush mount (203-FMI models are also available. All models include 1/2' NPS•throaded male fitting. Stainless steel sim4ocking mechanisms are standardlnot available on 203-FMi. Lumiiro e exclusive Siphon Protection System (S.P.S.) prevents water from siphoning Into the fixture through its own lead wires. H ... Hardware Stainless steel hardware Is standard to provide maximum co rro oion-resistance. 1 ... Socket Ceramic socket with 25(' C Teflon TU coated lead wires and GU5.3 bi-pin base. J ... Electrical Remote 12V transformer required Inot included). Available from Lumibre as ansccoccoi v - see the Accessories & Technical Data section of this catalog for details. K .-- Lamp Not included. Available from Lumiire as an accessory - coo reveres aide of this page. L ... Labels & Approvals UL and cUL listed. standard wet label_-IPa5 rated. Manufactured to ISO 9001-2000 Quality &yotemc Standard. IBEW union made. Approved by Naw York City Dept. of Buildings. Bureau of Electrical Control for -use in NYC, NY. M .-. Warranty Lumibre warrants its fixtures against defects in materials &- workmanship for three years_ Auxiliary equipment ouch as transformers, ballasts and lamps carry the original manufacturer's `-fm6-lac" 3-7/8`. x 2' (98mm x51 mm) , _ Rectangular tree/surface mouni!v ith seU -contained wiring compartrnent and ihjough( wiring pai sages. 'Specify finish IBK,:B2, CS,'VE, VM. CAMBRIA 203 SOW (max.) MR16 Halogen Low Voltage Acce IP65' LITE LU ATOM Positron #0247-C brass matte Q50MR16/C/FL40(EXN) flush to grade adjustable uplight requires MAX remote 12Ttransformer ` OP ' `.. =- ` `' - t ' , • composite vreathen tight well Housing , bottom view x'1/2' brass threc&W conduit ports .. i-`I'/2' brass plug O ` O • lid assembly and glass Jens ° vertical adjustablellomp bracket (b•ts•+I a top view • compression seal Lex fastener O. Ot o ; .. • lid assembly and jlaas"lens 0 "• compression lens+etaining device - section • angular odivats.16 • fomp Bracket Installation finish grade"4.75. • mr-16 BAB lamp 8_ lens accessory sleeve - ° (st• aC—e I ' • lamp replacemennspring clip + hex fastener to teflon wire'8 lamg socket composite housing law voltage cable with recommended ` composite weather tight • B' bop coded at lionom of fixture "In! well housing • 1/2' bran piugv Fit, I1-1I , l I I'1 111: iV, Ott: Install thisfhx ur'e in well drained 1 c + - 4• ureas. although wcterproof do not. Install • . In locations that on sublect-ta atonding water, as the�fixtun is not designed as a i submersible lamp anclosure. LITE RB ROBERTS', B -series, 9-1.8-1 E -length 10.8W/ft STEPLIGHTING U-channe'I extruded linear lighting - requires remote 24V transformer, length to be field verified (product in top of beam -route out channel for product placement) y feed individual fixtures seperately from transformer to avoid voltage drop 6=series; COV* Liter Designed forconvenience iri�opplicatioris of Cove`Lighting`; Six lamps per foot 2k o c spacing Spe66_4Watt Lamps (16,000+ hours); 118:WattLamps,`(10;000,hours)'or� ' 2.8 Watt Lamps,(5,000+ hours)1` Re -lamp capaaty for1years of continual service Low t® pem ure of Idir p.+allows for,re-lamping:withsystem'on; Available maximum 20';.6j fength`for,.9 Watt,orl 8 Watt Lamps rAvoileble maximum 10-0 length for 2 8 Watt Lamps: Fixture`s available mcustom'length or may,befield cut 'to sF orten Fixtures are 24 Volt Widespread light distribution in etther'horzontal or vertical _rpositions Lamps wired iii parallel, mounted m polyvinyl'extrusion- ready�•fo'riWtallatioii For ektra long`,r'uns, thio 20 .lengths can;be .centi r'fed ' (.9,Watt Lamp;,andyl:8',Watt;L6mp.only), Can be dimmed on iPrimary side of.step down transformer, visible surfaces of the extrusion may be painted to match orbecome a part of themolding ydesignl' ... - Factory kerfing for radius applications (pos§ible additional cost)' Mounting't oles'pre=drilled for screw:or'nnil'fittacFinient-r y SPECIFY BY, CATALOG NUMBERS B. -''12.8-2E-93' ,TYPE; LAMP POWER LIGHT, CHOICE FEED ;LENGTH B,Series 9 Watt or 1:814att1 E_=. One End 12" thru 240" 2.8 Wath . "2E --'Both Ends i r thru 120" SfRIEiS t B=Series Gove Lite !Designed for convenience in cove lighting._ applications; Roberts' B -Series extrusions are the perfect solution for highlighting ceiling moldings whose beauty may not be adequately enhanced by, no lighting. TheS-Serieeis'available.in'a`choice of lamp wattage, and may be ielamped with the system on. Aa with all Step -Lite Systems the ,Roberts \. staff isoavailable to. assist in design, project layout and/or to size transformers for specific projects: J LITE RCP recessed clock, plug mounted r 63 inches a.f.f. ' RL NATIONAL (2)' Runs Light Rope -1 20V 1 /2 inch: 5.5 watts/foot (incl.) SPECIALTIES incandescent linear rope lighting mounted_ I'n cove; two runs of product side4y-s'lde; contractor to secure - product flat; top of product to aligni with top of cove lip SCHEMATICS SPECS voltage 110VAC ' Bulb Specifications 3:5 volt, 50MA, A8 watts ' - Average Bulb Life 30,000 hours • 0iz" :—; 1 Bulb Spacing . • on Center Colors Clear, Red; t31ue;.U�ange; Vreen, O: -0 O O. 70' Yellow Diameter 1/T (13mm;) and 3/$" (10mm) Lengths Retail NacKagmg (131iste� F�acKetl) 3', 6',,12'; 18', 24'; 30'; 150' . uuin c•.noyu qy %I:.,�ruoy I Qt Wu/ _V Diameter CLEAR ONLY: 3',.6', 9', 12', 16,18% 21',24',27'. 30', 33', 36',' 39. Y 42'„ 45';48', 51', 54', 57:, 60; 63', 66', 69'; 72' 75', 78', 81', 84', 87' 90'; 93', 4 96'; 99' Interconnectability All tengms or equaf diameter can, connect together to a'maximum of 450 4 _ t S IRIS 7/,132TSRG 32W Triple CFL/3500-K 7° regressed showerlight with frosted lens IRIS CATALOGs: TYPE: DESCRIPTION Specification rade wat fisted triple tribe compact g p p pattern. Lamp _module snd optical. element 11"; � 6 ��t^ LLLL�� IUUJJ fluorescent fixture rated for direct contact with can be changed after installation to provide insulation. Regressed frosted lens provides a low a variety of lamp sources and distributions. MOMM�— 101111111 brightness aperture and's smooth illumination e.g. into a PAR36 Adjustable .................... p .040 thick aluminum specular clear upper and Keyed quick conneat.provides easy lamp module ................... D .................... , o SPECIFI'CATI.ON. FEATURES - [21omm1 A•••Reflector G•••Electrical ' .040 thick aluminum specular clear upper and Keyed quick conneat.provides easy lamp module spun parabolic lower reflector in Clear, Gold; installation. Haag, Warm Haze, Black Alzak":finish,.pairiled H•••Frame/Housing gloss white or marts white. Specialcone colors list- ed below. Hot dipped galvanized 18 gaups steel frame with built in 1/2 inoh.plasterliip. Gunsights allow B...Flange for consistent alignment, Aluminum .032 thick Self flange reflector oidfl ia castange with aither housing allows for heat dissipation and reduces matte white or clear coat finish. Oie cast flanges weight. are easily removed 'for "field".painting: Elements I ... Junction Box are keyed for properinsertion. Gasket is a closed Dell foam. 1g cubic inches, listed for 4N1.2 AWG or 6#14 AWG P7 g0• C additional feed through conductors, has six C tens 12 inch pryouts. 125thickfrostedIans obscures lamp and is - J ... Bar Hangers retained during relamping. D•••Attachment No Flex* be hangers with ppositive locking, for use with wood, engineered wood andsteel frame Positive torsion springs pull flange tight :to .joists spaced' up to 24' O.C. ship with platform. osiling.'Mechanical light -trap eliminates spill fight for use in T -bar ceilings order accessory MBCLP. at edge of flange or reflector. Nailess barb and locator lip provide consistent *...Socket installation height. 4 pin G24g4& base for 42W PLT, TBX and TTT K•••Codes lamps (G24g3 for3AV lamps).Totiguefree Thermal ly.p rotected, IP labeled, for use in direct stainless steel spring ensures positive lamp contact with insulation. Meets Washington State retention. Fixed socket'height ensures consistent Air tight "requirements, 1998 CABO Model' Energy lamp position. Code. F••Electronic Ballast L—Labels Thermally protected, current controlled rapid start ULdisted; CSA certified, standard wet label, ballast produces fug fight output and rated lamp iBEW union made. life. Provides flicker -free and noise -free operation PLE7aPbstar ;11p Extenafon for 161ax 2• ThIck Calling and starting. Meets stringent Class B requirements, Custom � K-COgna C KH-iCognicHaze CC dlocolate FCC part 18, for.noncommerciat applications. Por edditioral opti.— plc O°' r`aOotY f�9Wflflarriieeadr.4 ft— ORDERING 4NiORMATCOIV Comptaea unit W"ic" of a pladorm, module and domain Lamp .Optical Platform ,:Modulo Elements • Finish._ Flange Aceossoriss _ .. P7 .a2W E7SF1 e 7• Standard S Custom Cont. .. - 81ank: Matta .. IdBCIP 940 rAc ct Regressed Ca Clear OCH.Ch000la[e Whk*dis-cast Push OnTBar scaM" rF lainH-Maze ShowarlightG-Gold Haze SF-SelfFlange Clips(for10 Units) 's2W ct sosrrt WMHmWarmHaze WeGloasWhits MW-iMatteWhite '8- Black BU=81ush SUH41ushHare GP.Ora hits P Haz'G►aPhfts RAW=Natural Die-cast SFWF= Self Fla a Painted White PLE7aPbstar ;11p Extenafon for 161ax 2• ThIck Calling :Ma;TLuron= 32WTuWiro :Dimming COOPER LIGHTING Custom � K-COgna C KH-iCognicHaze CC dlocolate PNmPine PNHiiPih*Hato SKH=Sky.Haro Por edditioral opti.— plc O°' r`aOotY f�9Wflflarriieeadr.4 ft— P7 M42T M32T E7SR 42W Triple 32W Triple 7^ REGRESSED SHOWERLIGHT T Iz�bm �y 9 ts4 12 LV t8 y`• [210mmi \it2t2mml Ia2emnd� Ceifi Cutun 7 a'a"�197mmJ ENERGY DATA 7- AirTrght- 42W Lamp Input Power. 120V - B2w Input Current (Manic. 120V—.45A Power Factor. . 120V-9.99" T.H:D.: 120V < 10`x 32W Lamp input Power. 42DV - 9ew Input Current than): 120V - .9018 Power Factor. 120v � 9..99 T.64.0.: 120 V � < to% M32T Lutron :Input Power. 420V - 26w .Input Current (Max.): 120V - .99A . Power Factor. 120V - s .9s -t 20V .6 c 20% ADD20914 LITE .. 'SS +IRIS P3MR/E3AASR Sow/12V MR16 Lamp 4" recessed low voltage shower fixture with (maximum) P3MR E3AA8R DOW i/R1a 3' ADJUSTABLE SHOWER `a• 7 153(41 201.64 ,. �.u`'pou• a ml 4 318• 112mrn7 ENERGY DATA 120V hput Lamp RDS'. cwTAiOOs: TYPE: •' � t a Specification grade, wet. rated 50 watt MR16 20 adjustable fixture rated for direct contact with Insula. i Van. Adjustment mechanism features hot aiming caps. I--- . 1 37 gWo•fiae 500 cutoff : to lamp and tamp image For use `-- Q 1e P3MR E3AA8R DOW i/R1a 3' ADJUSTABLE SHOWER `a• 7 153(41 201.64 ,. �.u`'pou• a ml 4 318• 112mrn7 ENERGY DATA 120V hput Lamp RDS'. cwTAiOOs: TYPE: DESVRIPTION .watts. Specification grade, wet. rated 50 watt MR16 20 adjustable fixture rated for direct contact with Insula. i Van. Adjustment mechanism features hot aiming caps. I--- . bility, aiming marks and toeless locking: Optics provide 37 gWo•fiae 500 cutoff : to lamp and tamp image For use `-- Q 1e with all halogen MR16 lamp varieties. Optical ela an" 47 can be changed after &tstall tion to provWa a variety O dlstribuQons: e.g. into a Downight •_ - �,„�,J I2r 4 rel. b 4 We. 8 PE C I F I C ATLO N:� P E AT U R E 8 iia 1•-- i A...Roflector against overheating and ensure quiet operation. For .040 thick aluminum spun parabolic reflector In dimming, use dimmers rated for electromagnetic Clear, Gold, Haze, Warm Haze, Black ADak',finish, transformers; Transfomts+ is warranted for 6 years painted gloss white or matte white. Special cone and Is serviceable front below calling. colors fisted below. Nots: if a dimming system b operated for can. a ... class struction lighting in its 'shunt' mode, i.e. bypass- 125 thick tempered.gtass protects lamp from Ing the dimmer modules, for an extended period of direct spray of water, and Is retained during time, .fixtures with the dual -too toroidal transformer relempimg. should be operated on the 'Switched Fixture' out. C•••Flange -put until the dimmers are In use. Operating fixtures „ Salf, longe reflector or die-cast flange with either on the 'Dimmed Fixture' output with a ft/ I 20 matte white or dear coat finish. Die-cast flanges Input -for an extended period will overdrive the ' are easily removed for field painting. Elements lamp ander shortened lamp Ufa. are keyed for proper insertion. I ... Electrical D•••Adjustability Keyed quick connect for low voltage socket lead. 'Removable tamp adjustment mechanism,provides Transformer Is serviceable from below ceiling: up to 450 tilt and 3610 rotation and locks Into any J...Freme/Housing aiming position. Unit Is relamped without unlocking Hot dipped galvanized 20 gauge steel frame adjustmams. Translating canterbeam optics maxi. with built in 112 Inch plaster llp: Aluminum :032 mize light output. thick housing allows for heat dissipation and E•. -Lens reduces weight. Soft focus tans standard for smooth beam R•.•Junction sort patterns. Up to two filter media can be used 48 cubic Inches, -crated for 4012 AWG or 6914 which are retained during rdamping. AWG 900 C additional feed_ through conductors, F•••Attsehment has six 112 Inch pryouts. Positive torsion springs.pull flange tight to L ... Bar Hengers telling. Mechanical light trap eliminates spill No Flax bar hangers with positive locking, for use right at edge of flange or raftector. with jolsts spaced up to 24' O:C- ship with pleU a••.m socket for: For use In T -bar callings order accessory GX5-3 base for Bi,pin MR16 lamps. Back light MBCLP; Nalless barb and locator tip provide consls. shield keeps Interior of fixture dark. tent Installation height. N•••Transformer M•••Codes TruvolVI toroidal transformer with duatoutput taps Thermally protected, IP labeled, for use In direct contact with insulation. Meets Washington State for proper 12.OV operation. Dimmer tap compere. Air tight r equtrements, 1896 CABG Model Energy setas for Inherent voltage loss,from dimmers, Cod resulting In 30% more lumens than traditional lami- nated transformers. Toroidal design, with 90% or, N•••Labels greater efficiency, features a rolled one-piece con. UL and cUL listed, standard wet label, IBEW union tinuous cora of M3 grade grain oriented silicon ` mada steel complete with an Integral thermal to protect . ORDERING ,INFORMATION - Complete unit consists of a platform and element - Optical >Platform Element Finish Flange "MR E$AASR P3MR E3AA8R DOW i/R1a 3' ADJUSTABLE SHOWER `a• 7 153(41 201.64 ,. �.u`'pou• a ml 4 318• 112mrn7 ENERGY DATA 120V hput Lamp Input Opaatkv _ Wein .watts. . Current 20 23 .19 38 41 .34 37 42 .38 42 47 .38 so 87 .48 ccossol P3MR 3' . E3AASR - :Standard KH -Cognac Has Blank-. White MBCLP 40 Push On T LLSTRAW r. Ught Straw . Aktight.ICRated- 3'-MRt6 O--:C_Claw CC- Chocolate Custom .'die"eact Bee Clips .(for 10unttsl Lens . LOW .Vehspe 46• 'N -wHa2e CCH - 'SF- Self PLE3 - master Lip L27K 2700K dvotc M Housing •Adiustable Chocdats Haze ld G-Gold BU-skLah Flange Extension for Mox 2' tar ,P3MR REMOTE .Accent =WMH.-Warm BUM-ShAh Mar• RAW Natural ' 77Jek Ceiling , WAY Oaf Lou ..3• HatYC Limited He” '.Raza OP�GrtpMta Dlecast LSPI) .• Spread Las LSPINK Surpdsa Pink Housing for 'W tloa WhNs GPH-Graphite Hese .Sf1NF Self LLNR • Linear Spread Las MW- Matte Transformer -Matti White LPainted Las LePala Lavaca 'white PNH Pine Haze W UV Reduction Las Lens abs 'B- Block SK -Sky ` LLPMK - .Light Pink lens. LHEX re Hax Ce Louver • �'. �Custam SKH -Sky Haze - COOPlR L'IOHTINO 'k -Cognac, For adsuorW:optlms plow conalt factory. A0M25e3 Ltem nrNn b teeomnrwhMd for ase /bnpd refAetora i ITE -IM T* 12V dimmable magnetic type transformer for hard=wire installation;; ' for use with 12V,fixtures requiring REMOTE transformer U# FAIL-SAFE MTT-xx-120:-CEX-dimmable ballast-RSW FxxT8/SP30 fluorescent undercabinet task fixture with opaque front, " rocker switch and dimmable ballast MOUNTING ' e A. e c- 1. �oo A , T 11/2- 6 7/16' 24,,V 6' .. . 07W TS) (39mm) 038mm) (611mm) . MTT 11/2" 6 7/16" 36.1/16' : r 126W T8) (39mm) (138mrri) (916mm) MTT . T 1/2" 67/16- 48 1/16' (32W TB) (39inm) (138irim) _ 0221'mm) 9 MTT P 1/2' "6 7/16' 6o 1/16' "+ (40W T8) (39mm) (138mm) (1626mm) E 7 MTT BX 19116, 6 7/16' f:•;. (39W BX) (40mm) (138mm) (469mm) r mn-BX 19/16' 6 7/16` 24 1%16" (40W BX) (40mm) (138mm) (611 MM) MTT$X 19/16' 67/16' 361/.16' + (42) 39W BX) (40mm) (/38mm) (916mm) s MTT-BX 1' 9/16' 6 7/16' 481/16' ((2)40W.BX). (40mm) (138mm) (1221 mm) W14 METALUX W-232A-120V-EB81 (2) F32T8,/SP30 4' surface mount fluorescent fixture With acrylic%refractor lens METALUX' DESCRIPTION. The W Series wraparound features economy and energy efficient per- Cetetog s TVPe formance. The luminaire's characteristic clean, low profile design Is both appealing and practicay functional The W Series utilizes a clear, Projoct low brightness, extruded acrylic refractor and.a heavy gauge steel'end plate with embossed light seal for dependable performance and good Comments looks. APPLICATION Prepared bV Date The efficient and economical W Series Is therfect pe wraparound for commercial spaces, schools, dormitories, offices and retail areas. SPECIFICATION FEATURES A•••Construction III •••Electrical* D•••F.ramo/Shlelding Housing die formed code gauge Ballasts are CBM/ETL Oass "P' 100% dear virgin acrylic ref so• prime cold rolled steel, Six full and are positively secured by torliens. Sides have inside En. length fibs for strength. Balast mounting bolts. Pressure lock ear prisms and bottom has cover easily removed without lampholdenL UUCUL 1•Isted. pyramidal prisms fortow tools. Steel end plates with 7JW Suitable for damp -locations. brightness control' Lens can be KO and light sealembossment C•••Flnlab hinged from either side in a lift Cou ming or continuous row mounting: Multistage, from phosphate pre• and shift manner. treatment ensures maximum - bonding and rust inhibitor. Lighting grade, baked white aa8,a• [2251 1 enambl•finish. U � l.l.jl � ie7mmt �. S•1lY�1215mm1 'I. MOUNTING DATA 77e•112mmIK.0. R1 4k2inp lb.++o6AR Imboenmestn 7-V�•. f22mml p W !:. " - +6•It2lfmnl------------ I•' aa8,a• [2251 1 I; W7/e• rademml _ 96' (2t3A,tm1 7A' [22-1 KA W ' Q*r 17-1 H.I. 44 reslrtp Sundan emboe.rome 718• p2—.1 K.C. [. G.eneeu 6'n'p IN' 16-1 Hole r r-7 TIT 12tmml 7 -IN' itaamml X-3.114• %(, . 1"11161 ` t (s2m6tl �+O W 11392mm1� .. 1777mm1 14-11JM' (+2amm1 It -7(B' F-009-1Iato✓16"l+Dfmml 4a' 11219M.1 M•I57.Lean1 - 2+' (siomml - LAMP. CCNFIGURATI'CNS 7-V4• IlEarmnl 2,(e)wt>I• V33mm1� a -V2• Riamml COOPER UGHTMO LIFT ASHIFT REFRACTOR- uar tre..sale,e remits. Oaa 4we8aw h pya/ 1;dep ate) W220 217 240 232 411111111111110 SURFACE 2 LAMPS LYS OR HTS ♦' OR 8' SURFACE 2 LAMPS • Commercial Wrap ENERGY DATA Input Watm Ee fiat • WD Lappa 217 (39) 240172) 292 (61) Ea 0~ • SID Wella '220 (58) 217 (45) 240 (s6) 292(71) Wm41ain FffkWV R5*QL LER. M72 Ca"W9 wmLar. w.2 waft cwt of low tune -2000 hra at .!>/ IMIN a 69.29 •1sla,ae d.. a..s,mis me d dr tam�rod s.emn mr as,.asatn.mream . eaaabaawua- ADF020676 / iSupersedes ADF99180e1 ..Y, IT' E'M W22 - MET,, 5535E''Softside (2)FU32T8/SP35 2'X2' fluorescent surface mount cloud 'fixture F COOPER LIGHTING - mETALuxe 66as - r. v 6Y85 - t' of r 6625 - t w = s' Metalux Residential is launching a new end improved _ ' _ -•rte �, +• .�.'- ; ..:^•,—_=.�:,,.. ; eoldsdefaon/fio cloud called the y Tuffrpuf f The newTuffrpuff ...•• ^" - ` +' "• f+x Lr zee a new Ions technolb'�y caledthe Du1•.11ume 2200.T_fite'• r� - '" now tochnologyefiniinatea, �' ►'. �, ,�' + _ brodbge wfien using eoyfia Iem:The Tuff rMf•ofte,o e flcating appee-- that ti complmWi0senv d600rwlthfull, - - low brightnewllumination.The DECORATIVE soft floating profileofthe hameleeadlffi crprovideean SOFTSIDE • appearance thetiaintvtewith " SERIES today's residential and, oommer3alareircrtmenta. —. -• With a wide variety of modular Gaeoratise ahapagendaizeaytfaleieeTufF 71 ar t f aleps e - rCtAffixWreforvirtuellyevery _ •poo* and deoorahion poeaibitirty. - - The faduresadd the righttouch ItEBtDB.NTUIL WFIFACE FAca tothe btahen,den, tiwngroom, MOUNTED CILCOM • bathroom, office or revmtional 6tINT apace, •b New levo la natunlly - ' resistant to oolorahlfb • when exp 000ee�d to W - .ent ORDERING JAFORNATIONA... ..-..,�-- ,.. _ ,_,_, _. - _. ,taypioa)dfluoenaotye mps(lane will notyetloW) . Catdlog... - Nuewecn •• .. - - - gypping ... Lan -p tNt. Newlemwilleliminatethe _ - t ha' mnakndling and Bo1�i6 [TufFrldFl - - -.Chow - - .. imftllation damage -62�.C34•IEBy 10'.e� V3Rg2F47T12 tTIb-Mlial cfhara6taeatio of the - f681A ��fEBt I%'.1a' �.. IFUJM2RMan2 23 b.AIDAW delicate puffligh" IMM S43&Mi tT■efr 040M. IF3M-281Ia.1113boD d•IHueerr. - _ The ne wwhies olps tfmirmte existing shadows • while reduoing sharp edge• • and-prornoting cafe handling. • • Energy SavingRucreesant ' ,fighting. • Soft floating opal WWW" f F acrylioddfuoer • i _ lift and shift diffuew far • � . - • $leg entmoWad-endro�pe arld matte rYh its &NUBW (Dome modeW ' l • Soft Blumtrotion ' larailablewith EnirgyStar QLoLfied eleobosio - `balaaeoe) -- ' • - � F�le euga ateehhoueing wiIM white _ • e enamel: flf\af1 . • lleeetwoorfour fluorewentlampo ' - (notinduded) • + - StfibWefor damplocatione I coca�lruc�.v�aaasa.raor..o.w.reo.ren.a..°1ecwaowoa.wrro...q.�m_r•.•a.++nse.so.w'rw UiJCiJIQated nbrenie•�mn.aLYdtWttl4ttM10Q _t�1V a+µ� CUY•[ycv tu�.11rN.rbe44•rr>:rU aAreelnaanrb�a/101ri mea..�e.eeysean....n.aro..+crr.s�w�...me„e.u.me.rar�,mri..r.el.a.•.oe.mae.•m.s ' COOPER L'16HTIN0 v J Y •fir• r � e ...` . ;� • ... LITE •� , Z Owner selected decorative :fixture installed by + - electricalcontractor + ZFL ' Owner selected FLUORESCENT decorative fixture Installed by, ' electrical contractor Fixture Schedule.Notes .' ALL MR16 lamps are to be 'GE' brand, Constant Color and exact wattage'/beam, spread as' noted; otherwise Contractor to replace at his/,her own expense. As well, all other lamp types are to be 'GE' brand', unless noted otherwise. 'ALL Type 'U' fixtures are linear undercabinet task style fixtures and need to be T installed per the following guidelines: - a). Fixture(s) to beheld to front edge of the upper cabinet and concealed behind a minimum 2" valance. b). Fixture to be fed' power from side.wall if possible; otherwise coordinate t Inconspicuous wire chase with millwork and/or general contractor. c). Actual fixture lengths to be field verified PRIORto' procurement. ; ALL fixtures requiring remote transformer to be wired with a size that allows no more than a 1 -volt drop from transformer to EACH individual fixture. Transformer locations to be field determined. , MADISON VILLAS LOT #114 fit• b'8t � ISLAND #25#24 # 23 #22 # 21 #:!o #19 #'18#17 IrJ ^ y'J TO 41 ��r� �. c,J I #42 # 43 # 44 vl " RECEIVED P,e":g 2412 r%. e •_i Y INSTALLATION CERTIFICATE CF -6R -LTG -01 Residential Lighting (Pagel of3) Site Address: Enforcement Agency: Permit Number: 1. Kitchen Lighting Dnec nrniert inrinrie kitchen liohtina9 Yes, complete section 1 ❑ No, go on to section 2 ❑ Yes § 150(k)3: The wattage of permanently installed luminaires (lighting fixtures has been determined as specified by § 130(d). ❑ Yes ❑ No . § 150(k)3: In the kitchen, are there electrical boxes finished with a blank cover or where no electrical equipment has been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan? If yes, the following row must also be es: ❑ Yes [INA Watta a has been calculated as 180 watts of low efficacy lighting er blank electrical box. §150(k)8 Kitchen Lighting must comply with either method (a), (b), or (c) below: (a) All high efficacy luminaires F-0 Yes, complies because only high efficacy luminaires have been installed in the kitchen. ❑ No, complies with method (b) or (c). . (b) >_ 50% watts used by high efficacy luminaires ❑ Yes, complies because at least 50% of the installed watts are from permanently installed high efficacy luminaires as demonstrated in the table below: Total A > Total B. ❑ No, complies with method (a) or (c). Fill out the following table if complying with either method (b) or (c). Table (b) Luminaire Type Efficacy High Low Watts x Quantity C A+C High Efficacy Watts or Low Efficacy Watts Le, 17 )d ❑ 1.9x 10 = l y D or o. -C 5C en)- `e' ❑ Ck x S 5 or 1-I 910.)2n m' -3S x 5 = or 1-75 tt► (--Aof51c of ❑ 2S x 6 or ),So ❑ ❑ Complies with method (b) if A > B Total: A:Z > B: 3 LS7 (c) Additional Kitchen Low Efficacy Lighting ❑ Yes, complies because the kitchen lighting qualifies for additional low efficacy lighting and as demonstrated in table in (b) (above) and the table in (c) (below) that ( A + C) >_ B ❑ No, complies with method (a) or (b). Additional kitchen low efficacy lighting is available only if all of the following are true: �1 Yes. All low efficacy luminaires in the kitchen are controlled by a vacancy sensor Dij2mer energy management control system (EMCS) or a multi -scene programmable controls stem. Yes. Permanently installed luminaires in garages laundry rooms closets greater than 70 square feet and utility rooms are high efficacy luminaires AND are controlled by a vacancy sensor. Table (c) From the Table in b Use 50 W for dwelling units:5 2,500 Use 100 W for dwelling units > 2,500 ft Add Yes/No ? A B. C A+C Is (A+Q >B? -2-3s tiJ oa W 3 3 s Ves 2. Lighting Internal to Cabinets Does project includes lighting internal to cabinets? ❑ Yes, complete section 2 No, go on to section 3 ❑ Yes, § I50(k)9: Permanently installed lighting internal to cabinets uses _< 20 watts of power per linear foot of illuminated cabinet. 2008 Residential Compliance Forms August 2009. rINSTALLATION CERTIFICATE CF -6R -LTG -01 Residential Lighting (Page 2 of 3 Site Address: Enforcement Agency: Permit Number: 3. Installed Devices and Components Have Been Certified to the Energv Commission Does the project include any of the devices or components listed below? [3Yes, complete section 3 13No, go on to section 4 'L( Yes § 119 and § 150(k)7(F): Any of the following devices and components which have been installed have been certified to the Energy Commission according to the applicable provisions of § 119: All LED lighting systems that are classified as high efficacy, ballasts used in recessed luminaires, vacancy sensors (automatic off/manual on occupant sensors), dimmers, track lighting integral current limiters and outdoor motion sensors 4. i.iahtinu Cnntrnle Cmmnlnto enr•tinn d 91 Yes ❑ NA §I50(k)7A: Permanently installed low efficacy luminaires are controlled by switches separate from those controlling high efficacy luminaires. Yes ❑ NA §I50(k)7B: Exhaust fans with integral lighting systems are switched separately from lighting systems, OR have a lighting system that can be manually turned on and off while allowing the fan to continue to operate for an extended period of time. 19rYes ❑ NA §150(k)7C: All permanently installed luminaires are switched with readily accessible controls that permit the luminaires to be manually switched on and off. Q® Yes ❑ NA § 150(k)7D: All lighting controls have been installed in accordance with the manufacturer's instructions. Yes ❑ NA § 150(k)7E: All lighting circuits that are controlled by more than one switch, where a dimmer or vacancy sensor has been installed to comply with § 150(k), no controls bypass the dimmer or vacancy sensor functions. 5. Luminaires (Lighting Fixtures) lines the nrniert inrhvie the inetallatinn „f a,,., Yes, complete section 5 ❑ No, go on to section 6 Yes, high efficacy luminaire classification has been determined according to § 150(k)1, and low efficacy luminaire classification has been determined according to §I50(k)2. Yes ❑ NA § 150(k)4: Fluorescent lamps rated 13 watts or greater have an electronic ballasts having an output frequency no less than 20 kHz. ❑ Yes NA § I50(k)5: Permanently installed night lights, and night lights integral to permanently installed luminaires or exhaust fans, contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and do not contain a line -voltage socket or line voltage lamp holder, OR the night light is rated to consume no more than 5 watts of power and does not contain a medium screw -base socket. Yes ❑ NA § 150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, meet the applicable requirements of § 150(k). W Yes ❑ NA Any electrical box finished with a blank cover or where no electrical equipment has been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, has been treated as low efficacy luminaires for compliance with §150(k). Does the project include any luminaires that are recessed into insulated ceilings? Yes, complete the rest of section 5 ❑ No, go on to section 6 Yes, § 150(k)12: Luminaires that are recessed into insulated ceilings meet all of the following conditions: VV Yes, are listed, as defined in §101, for zero clearance insulation contact (IC) by UL or other nationally recognized testing/rating laboratory, and Yes, have labels that certify the luminaires are airtight with air leakage less than 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283 (Exhaust fan housings are not required to be certified airtight), and Yes, are sealed with a gasket or caulk between luminaire housings and the ceiling, and all air leak paths between conditioned and unconditioned spaces have been sealed with a gasket or caulk. (including all exhaust fan housings), and 'VErYes, allows ballast maintenance and replacement to be readily accessible to building occupants from below the ceiling without requiring the cutting of holes in the ceiling. 6. Indoor Lighting (any indoor room that is not a kitchen) noes me project mcluae permanenuy installed luminaires in any room that is not a kitchen? -l(Yes, complete section 6 ❑ No, go on to section 7 Yes ❑ NA §150(k)10: Permanently installed luminaires in bathrooms, garages, laundry rooms, closets> 70 ftZ, and utility rooms are high efficacy luminaires OR are controlled by a vacancy sensor. Yes ❑ NA § 150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms are high efficacy luminaires, OR are controlled by a dimmer switch OR are controlled by a vacancy sensor. 2008 Residential Compliance Forms August 2009 INSTALLATION CERTIFICATE CF -6R -LTG -01 Residential Lighting (Page 3 of 3 Site Address: Enforcement Agency: Permit Number: 7. Outdoor Lighting Does the project include any permanentlyinstalled outdoor lighting? Yes, complete section 7 ❑ No, go on to section 8 Yes ❑ NA §150(k)13: Luminaires providing outdoor lighting, including outdoor lighting for private patios on low-rise residential buildings Responsible Person's Signature: , with four or more dwelling units, entrances, balconies, and porches, and which are permanently mounted to a residential 026/1 building or to other buildings on the same lot are high efficacy luminaires OR are controlled by a manual on/off switch, plus a Date Signed: motion sensor not having an override or bypass switch that disables the motion sensor, plus one of the following three S1 S3 L additional control methods: ve^ I gyqte,-- a. A photocontrol that does not have an override or bypass switch that disables the photocontrol; or b. An astronomical time clock not having an override or bypass switch that disables the astronomical time clock; or C. Energy management controls systems (EMCS) not having an override or bypass switch that allows the luminaire to be always on. Yes ❑ NA Exception 2: Low efficacy outdoor luminaires used to comply with Exception 1 to §150(k)13 are controlled by an override switch which temporarily bypasses the motion sensing function, and the motion sensor is automatically reactivated within six hours. The luminaire is controlled by a photocontrol, astronomical time clock, or EMCS as required by Exception 1 to §150(k)13. ❑ Yes ❑ NA Exception 3: There are permanently installed luminaires in or around swimming pools, water features, or other locations subject to Article 680 of the California Electric Code which do not need to be high efficacy luminaires. ❑ Yes ❑ NA §150(k)14: Internally illuminated address signs comply with §148, OR do not contain a screw -base socket and consume no more than 5 watts of power as determined according to § 130(d). ❑ Yes ❑ NA §150(k)15 Lighting for parking lots and carports with a total of 8 or more vehicles per site have lighting that complies with § 130,132, 134, and 147. Lighting for parking garages. for 8 or more vehicles comply with § 130, 131, 134, and 146. If yes, the Nonresidential compliance forms must be submitted 8. Common areas of low-rise residential buildings Does the project include th installation of any luminaires in common areas of low-rise residential buildings? ❑ Yes, complete section 8 Z No, go on to section 9 ❑ Yes, §150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with §I 19(d). DECLARATION STATEMENT • I certify under penalty of perjury, under the laws of the State of California, the information provided on this form is true and correct. • 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized representative of the person responsible for construction (responsible person). • I certify that the installed features, materials, components, or manufactured devices identified on this certificate (the installation) conforms to all applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the enforcement agency. • I reviewed a copy of the Certificate of Compliance (CF -1R) form approved by the enforcement agency that identifies the specific requirements for the installation. I certify that the requirements detailed on the CF -1R that apply to the installation have been met. • I.will ensure that a completed, signed copy of this Installation Certificate shall be posted, or made available with the building permit(s) issued for the building, and made available to the enforcement agency for all applicable inspections. I understand that a signed copy of this Installation Certificate is required to be included with the documentation the builder provides to the building owner at occupancy. Company Name: (Installing Subcontractor or General Contractor or Builder/Owner) 5U 2- 6,0,raA---) 1✓ 1 c.cfirl C� Responsible Person's Name: Responsible Person's Signature: , Cr -i S ln� w en 026/1 CSLB License: Date Signed: Position With Company (Title): S1 S3 L I LF/ -1.,1. / I Z ve^ I gyqte,-- 2008 Residential Compliance Forms August 2009 •J76ANDATORY MEASURES SUMMARY: Residential ,,16Project Name Residence e2of MF -1 R Date 11/23/2011. M MC ions §150(02, All air -distribution system ducts and plenums and return -air tsled and and plenums fa d to meet the a insulated to aguirements ofmini um installed leveltof R- 601, 602, 603, 604, 605 and Standard 6-5; supp y- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal o enin s greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(0)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than semay aled sheet metal, duct board or flexible ditefs and suf bort pea forms shall'not becolmpressled tolaa seaeduct ons nutheocrosssect'onal area contain ducts. Ducts installed m ca PP , of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such to a is used in combination with mastic and draw bands. -------- 4150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(0)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dam 3ers. §150(0)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and win . Cellular foam insulation shall be protected as above or painted with,a coating that is water retardant and provides shielding from solar rnrtiatinn that can cause degradation of the material. > > 150 m 10: Flexible ducts cannot nave orou5 1111ICI li ,1 . §150(0): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Accepta e n oor it Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation re uired in Section 4 of that Standard. Pool and Spa Heatin S stems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and rshall not use electric resistance heating or pilot Ii ht. 4(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction return lines or built -u connections for future solar heatin 114 b 2: Outdoor ools or s as that have a heat pump or gas heater shall have a coder. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or . programmed to run onlyduringoff-Peak electric demand periods. 150 : Residential pool systems orequipment meet the um sizing, flow rate, i in ,filters, and valve requirements of 150 Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire as specified by 15011(k)2. 150 o: The wattage of Rermanentl f installed luminaires shall be determined asspecified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain aline -voltage socket or line - than five watts of power as determined by §130(d), and shall not contain a voltage lamp holder; OR shall be rated to consume no more * medium screw -base socket. 150 k 6: Li htin inte ral to exhaust fans, in rooms other than kitchens, shall meet thea applicable re uirements of§150(k).- 1 50 k 7: All §witchinq devices and controls shall meet the requirements of §150(k)7. 150(k)8 A_minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy_ -EXCEPTION: -500 ftz may be EXCEPTION: Up to 50 watts for dwelling units less than or e�qualzto 2,500,ftzor 100 watts,for dwelling units larger than 2, �zempt from the 50% high efficacy requirement when: all I_ow efficacy luminaires in the kitchen are controlled by a manual on occupant `sensor, dimmer, energy management system (FMCS), or a multi -scene programmable control system; and all permanently installed 'luminaries in g aar g se ;laundry rooms closets greater than 70-squ a feet, and'utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. • <RunCode: 2011-11-23T12:16:30 ID: Page 15 of Ene yPro 5.1 by EnergySoft User Number. 2655 I (2) INSTALLATION CERTIFICATE CF -6R -LTG -01 Residential LiMbft (Pay 1 of 3 Site Address: EnforeementAgme. Penait Nombei- MA,DISON U-Wa C01.0I41A1- 1. Kitchen Lighting rl . ....,;P�4 ;.rl.vLP k;teh,"m I;otd;no9 complete section 1 0 N on to section 2 0 Yes §l : The wattage of pumaneutly mstallad hanieaites faeces has been determined as spwfficd by §lMd), 0 Yes 0 No § I50(k).3: In the kitchen, ate there electrical boxes finished with a blank cover or where no electrical equipment has been and where the electrical box can be used for a luminaire or a surface mounted ceiling fan? IfycN the folknving row must also be es: 0 Yes O NA W~ has been calculated as 180 watts of low efficacy lighting per blank electrical box. §150(k)8 Kitchen Lighting mast comply with either method (a), (b), or (c) below: (a) All high efficacy luminaires O Yes, complies because only high efficacy Imninaires have been installed in the kitchen. o, complies with method or (c). (b) >_ 50% watts used by high efficacy luminaires Yes, complies because at least 50% of the installed watts are from permanently installed high efficacy hzmir s as demonstrated in the table below: Total Aa Total B. 0 No, complies with method a or c Fill out the following table if complying with either method (b) or (c). Tamp fhl Luminaire Type Efficacy Fligh Low Watts x Quantity=High C Efficacy Watts or Low Efficacy Watts P 13. o )< S"0 x - — or g 30 tlf r< ° 31 x 6, — 19 ?� or GFl. ZF'W )K( ° 24 x 3 - 76 or DINFnP UL ° 17 x 2- = 3�C or Ut, ° ° 3a x = G�h or Complies with method (b) if A > B Total: A: S >_ B: .> v (c) Additional Kitchen Low Efficacy Lighting 0 Ye4 complies because the kitchen lighting qualifies for additional low efficacy ligbt uM and as demonsbaW in table in above and the table in c low that A + C >_ B N complies with method a or (b). j Additional kitchen low efficacy tie is available only if all of the following are true: 0 Yes. All low efficacy lumin :res, in the kitchen are cormolted by a vacancy sensor Dhmncr cneW management control system PdCS)or a multi -scene cameo qyskm 0 Yes. Permanently installed bimmaires in garages tmmdry moms closets greater than 70 square feet and utility rooms are high efficacy luminaires AND ate controlled by a vacancy sensor. Tohln l..l From tate Table in Use 50 W for dwelling units:5 2,500 fe Use 100 W for dwelling units > 2,500 ft2 Add yes/No ? A B C A+C Is (A+C) >B? 2. Lighting Internal to Cabinets Does project umAu des hgbftng internal to cabinets? 0 Yes. complete section 2 ANo. go on to section 3 0 Yes` 61SWkl9: Permane tiv installed liehreag internal to cabinets uses _< 20 watts of grower Per linear foot of illuminated cabinet 2008 Residential Compliance Forms August 2009 �. , INSTALLATION CERTIFICATE CF -6R LTG -0 Residential Ligbtin 2 of 3) Site Address: Eoforeemeet Agcncy: Permit Number. MAOI S0" CLU13 a it .."I" ttw:.•..a and ramnnuents Have Been Certified to the Energy Commission --r ---- - tared lhetow' ❑ Yes, complete sectioe 3 ❑ No, go on to section 4 _Does the project include so of the devices or components -- ❑ Yes § 119 and § I50(k)7(F} Any of the following devices and components which have been installed have been certified to the Energy Conmissiom according to the applicable provisions of §119: All LED lighting systems that are classified as high efficacy, ballasts used in recessed luminaires, vacancy sensors (automatic of37manuml on occupant sensors), dimmers, track lighting integral cu rmul limiters, and outdoor motion sensors. 4. Yes D %-Un"Un a.vm hew as uau -. ❑ NA §I-Wk)7A: Permanently installed low efficacy luminaires are controlled by switches separate from those controlling high efficacy luminaires. Yes ❑ NA § 150(k)7B: Exihauat fags with integral lighting systems are switched seely bum lighting systems, OR have a G&W% .. system that can be manually turned on and off while allowing the fan to continue to operate for an extended period of time. Yes ❑ NA § 150(k)7C: All permanently i stalled lumumires ane switched with readily accessible controls that permit the laanun ires to be manually switched on and off. Yes ❑ NA § I50(k)7D: All lighting controls have been installed in accordance with the manufacturces instruchiorrc. Yes ❑ NA § 150(k)7E: All lighting churns that are controlled by more than one switch, where a dimmer or vacancy sensor has been installed to comply with §150(k), no controls bypass the dimmer or vacancy sensor fimcdoru. 5. Luminaires (Lighting Futures) Does the project Include we nnsmmrB Mm or "U=Mno . — Yes, complete section 5 ❑ No, go onto section 6 XYes, high efficacy luminaire classification has been determined according to § 150(k)1, and low efficacy luminaire elass7fication has been determined according to §150(k)2. Yes ❑ NA §150": Fluorescent lamps rated 13 watts or greater have an electronic ballasts having an otaput ftcq=Ky no less than 20 kHz El Yes NA § I50(k)5: Permanently installed night tights, and night lights integral to permanently installed hmmimaices or exhaust fans, eoutain only high efficacy lamps meeting the mburnumm efficacies contained w table 150-C and do not oohtain a lima-vohage socket or line voltage lamp holden OR the night light is rated to consume no more than 5 watts of power and does not cvrnain a medium screw -base socket. ❑ Yes NA §I50(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, meet the applicable tegamements of §150(k). ❑ Yes ANA Any electrical box finished with a blank cover or where no electrical eghdpment has been installed, and where the electrical box can be used for a hmmmaire or a surface momted ceiling fan, has been treated as low efficacy luminaires for oomplianoe with §150(k). Does the project include any luminaires that are recessed into insulated ceilings? KY7complete the rest of section 5 ❑ No, go on to section 6 KYes, § 150(k)12: Luminaires that are recessed into insulated ceilings meet all of the following conditions: JK Yes, she listed, as defined in §101, for aero clearance insulation coaaad (IC) by UL or other nationally recognized labon dory, and KYes, have labels that certify the hrmaires are airtight with air leakage less tem 2.0 CFM at 75 Pascals when tested in accordance with ASTM EM (Exhaust fan housings ate not required to be oerbfied anti&), and Yes, are sealed with a gasket or caulk between luminaire housings and the ceiling, and all air kale paths between conditioned and unconditioned spaces have been sailed with a gasket or caulk (including all exh� fan housings), and Yes, allows ballast maintenance sed replacement to be readily accessible to building occupants from below the ceiling without requiring the cutting of holes in the ceiling. 6. Indoor Liehtine (env indoor room that is not a kitchen) Does the pmjm include permaneggy installed luminaires in my room that is not a Katctheu: ,XVes, complete section 6 ❑ No, go on to section 7 �( Yes O NA §150(k)10: Permanently installed luminaires in bathrooms, garages. laundry rooms, closets > 70 fl . and urtility rooms are high efficacy lumbmises OR we controlled by a vacancy sensor - Yes ❑ NA §15o(k)l l: Petmancudy installed luminaires located in rooms or areas other than in kites, bathrooms, prows. rooms, closets„ and utility rooms are high efficacy hm»naires, OR are controlled by a dimmer switch OR are controlled by a vacancy sensor. 2008 Residential Compliance Forms August 2009 INSTALLATION CERTIFICATE CF -6R -LTG -01 Residential L 3 of 3 Site Address: Eoforcemeat Ageacy: Perasit Na ober. NAD1So" C.4149 G t.0tJ1at,,. 7. Outdoor Lighting rinm Not ont our Gowno? Yes, complete section 7 ❑ No, go on to section 8 [3YcsjjNA §150(k)13: Luminaires providingoutdoor lighting, including outdoor lighting for private patios on low-rise residential buildings Respons with foto or mote dwelling units, entrances, balconies, and porches, and which we permanently mounted to a residential building ar to other buildings on the same lot we high efficacy luminaires OR are controlled by a manual odoff switch, plus a Date Si lc motion sensor not having an override or bypass switch that disables the mo ion sensor, plus one of the following three additional control methods: a A photocontroi that does not have an override or bypass switch that disables the phowcontrol; or b. An astronomical time clock not having an override or bypass switch that disables rho astronomical time clods or C. Energy mataagemerit controls systems (FMCS) not having an override or bypass switch that allows the luminaim to be always on Yes ❑ NA Esoeptiat 2: Low efEica y oro wr hurninaires used i o comply with Exception 1 to §150(k)13 arecontrolled by an override switch which temporarily bypasses the motion sensing function, and the motion sensor is automatically reactivated within six hours. The luminaire is controlled by a pbotocornrol, astronomical time clock, or EMCS as required by Exception 1 to §150(k)13. ❑ Yes IK NA Exception 3: There are permanently installed luminaires in or around swimming pools, water features, or other locations subject to Article 680 of the California Electric Code which do not creed to be high efficacy lumimaues. O Yes NA §15W)14: Internally illuminated address signs comply with §14& OR do not contain a screw 4me socket and consume no more than 5 watts of power as determined amordnng to § 130(d). O Yes X NA §150(k)15 Lighting for pang lots and carports with a total of 8 or moa vehicles per site have lighting that complies with §130,132,134, and 147. Lighting for parking garages for 8 or more vehicles comply with §130.131, 134, and 146. if yes, the Nonresidential Compliance farms mast be submitted & Common areas of low-rise residential buildings Does the pwiect include the installation of any luminaires in Common areas of low-rise tesideatial buildings? ❑ Yes, complete section 8 . No, go on to section 9 ❑ Yes, § 150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or mote dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with §119(d). DECLARATION STATEMENT • I certify under penalty of perjury, under the laws of the State of California, the infomuation provided on this form is true and correct. • I am eligible under Division 3 of the Business and Professions Code to accept responsibility for construction, or an authorized representative of the person responsible for construction (responsible person). • 1 certify that the installed features, materials, components, or manufactured devices identified on this certificate (the installation) conforms to all applicable codes and regulations, and the installation is consistent with the plans and specifications approved by the enforcement agency • I reviewed a copy of the Certificate of Compliance (CF -1R) form approved by the enforcement agency that identifies the specific requirements for the installation. I certify that the requirements detailed on the CF -1R that apply to the installation have been met. • I will ensure that a completed, signed copy of this Installation Certificate shall be posted, or made available with the building permit(s) issued for the building, and made available to the enforcement agency for all appfieable inspections. I understand that a signed copy of this Installation Certificate is required to be included with the documeatation the builder provides to the building owner of Mlfln/nrv_ Company Name: (installing Subcontractor or General Contractor or Builder/Owner) -X L i Tc F Responsible Person's Name: Respons ih4,K�ES .lo1;T2� CSLB License: Date Si lc Post patty (Tide): yp s/4nr 2008 Residential Compliance Forms August 2009 Iv LITEFA 4848 E. CACTUS RD., 505-805 SCOTTSDALE, ARIZONA 85254 480/632 - 2949 OR 480/558 - 1260 FAX MADISON CLUB -COLONIAL LIGHTING FIXTURE SCHEDULE Type Manufacturer Description Lamp A -HALO HI4991CT/1420P,/L11 1 Soft Focus Lens 50W/'12V MR16 Lamp 4" recessed low voltage fixture with adjustable (maximum) slot trim and integral 12V transformer HALO* 'DESCRIPTION An H14991C family housing with an integral low voltage transformer that supplies 12 volts to MR16 lamps. The H1499iC is for installations where the housing will be in direct contact with insulation. The H1499 Air -Tito housing also meets restricted air flow requirements.The H14991C Is a suited for use in insulated'ceilings in residential and commercial applications. DESIGN FEATURES A--- Outer Housing Double wall aluminum construction for greater heat dissipation. H14991C housing is Basketed to prevent airflow from heated or air conditioned'spaces. B---Plastor Frame Galvanized steel construction. The housing can be removed from plaster frame to provide access to the junction box. Plaster frame features include: • Regressed locking screw for securing hanger bars from below the ceiling • Six cutouts for easily crimping hanger bars in position • Halo name embossed on plaster frame SLIDE -N -SIDE— Junction Box • Four 1/2" trade size conduit knockouts with true pry -out slots positioned to accommodate straight conduit runs. • Slide -N -Side'" wire traps allow non-metallic sheathed cable to be installed without tools and without removing knockouts. Accepts a wide range of non-metallic sheathed cable. • Allows connections to be made outside the junction box • Simply insert the cable directly into the trap after connections are made. • UL Listed for through branch circuit wiring (maximum 8 No.12 ga., 901C cond'uctors). • Accommodates the following standard non-metallic sheathed cable sizes: (US) #14/2,914/3,#12/2,#12/3 (Canada) #1412,#14/3,#1212 D"'GOT NAILI Pass-N- Thru — Bar Hangers Bar Hanger Features include: • Pre-installed nail easily installs in regular lumber, engineered lumber and laminated beams • Safety and guidance system prevents snagging, ensures smooth straight nail penetration and allows bar hangers to be easily removed if necessary. -Automatic fevelling flange aligns the housing and lets you hold the housing in place with one hand while driving nails • Housing can be positioned at any point within 24- joist span • Score lines allow •tooless" shortening for 12" joists • Bar hangers maybe repositioned 90• • Bar hangers do not need to be removed from frame for shortening • Integral T -bar clips snaps onto T -bars - no additional dips required E ---Transformer 120V Integral magnetic transformer steps line voltage down to lamp operating voltage. G ... Thermal Protector Self resettingthermal protector deactivates fixture if overheating occurs due to improper lamping. Labels • UVcUL Listed for Damp Location • U VcU L listed for Feed Th rough • UL/cUL listed for Direct Contact with insulation and combustible material Meets following requirements: • State of WashingtonEnergy Code • California Title 24 Low efficacy luminaire IC and AT requirements • International Energy Conservation Code (IECC) • New York State Energy Conservation Code (NY—ECC), • Certified under ASTM -E283 for airtight construction 41a• 1114-1 c.116p ' OpaNnp 7 I/V t184mm1 Top Via a 112' I241mml as• [aso—I •a 1 H14991C 4"insulated Ceiling AIR-TITE "• Low -Voltage Recessed Housing 4- TRIMS FOR USE IN INSULATED CEILINGS FOR DIRECT CONTACT WITH INSULATION with all trims listed Rea— oY FOr��u'fli�► on UPGRADE FEATURES: • SLIDE -,N -SIDE- JUNCTION BOX • GOT NAILI— BAR HANGERS • PASS411=THRUM BAR HANGERS • REGRESSED LOCKING SCREW •.HALOID ON PLASTER FRAME 3LITE A Trim DESCRIPTION Ad] ustableSlot Aperture trim for I?V,Iow voltage 4" !'11499 family recessed housings' Lamp tilts 35', Die casbtrimAng avallable Ina'varlety of•flnlshes:'� Ttlrae cats_paw" springs'securetr1M In housing. M DESIGN. GEATURES Cestaluminum trtrrl ring evejlable fn Matte White,-Sllyer, SeUn Nickel;`Antigwi b?pper or,; Tuscan Bronie fins hes. Slot'epertur®proJfdes adjustable leriip afming wlth a cloen coiling presence Three pressure sprinds.Gniuro positive retention in'housing " "' 1420 Is designed for.use.with_ the -following small apertura housings; l.Ine`Voltagc Housing' , -M`1499T... '60W12VMR16 ' H1499RT.- '60W•12V MR16 .1420P, H1499ICT 6ow12VMA16. ;W6ifeTrlm H14991761 .76W 12V MR16 1420SU !Silver Trim' .Slot Ap4rtrq - ' -I6�i36mm1 "'1i29mm1 r t 1420SN S,Satin Nickel Trim .i Y420Ac Antique Copper Trim TdM -. 1420P White Trtm 1420SkSl14erTrlm • } 1420SN Satin NlckalTrfm _ -- - 1420AG AntiqueCopperTrim' - _-- 142oTB2 Tuscan Bronze Trfrr,' _ 1420TBZ Tuscan BronzeTrlm:Ring Adjustable Slot Aperture • 4" TRIMS r li f_ LITEY`� AM HALO/ H14991CT/.LC105/,L1 11 Soft focus Lens 50W/1 2V MR16 LAMP CAPRI 4" recessed L.V. fixture with adjustable mirror trim HALO* •w DESCRIPTION. -- An H14991C family.housing with an integral low voltage transformer I , that supplies 12 volts to MR16 lamps. The H1499IC is for installations where the housing will be in direct contact with insulation. The H1499Air-rite housing also meets restricted airflow .: requirements.The H14491C is a suited for use in insulated ceilings in residential and'commercial applications. DESIGN FEATURES .±. A••• Outer Housing •Simply insert the cable directly removed from frame for i Double wall aluminum into the trap after connections shortening r - construction for greater heat are made. -Integral T -bar clips snaps onto dissipation. H14991C.housing is • UL Listed for through branch T=bars - no additional clips `S gasketed to prevent airflow -from, circuit wiring (maximum 8 required "_J•- heatedorair conditionedspaces. No.12ga.,901Cconductors). E•••Transformer B•••Plastor Frame •. Accommodates the following standard non-metallic 120V Integral magnetic Galvamzed.steel'construdion. sheathed cable sizes: transformer steps line voltage • i The housing can be removed (US) #14/2, #14/3, #12/2, #12/3 down to lamp operating voltage. from plaster frame -to provide (Canada) 014/2,014l3,dt12/2 G•••Thermal Protector access to the'junctionbox D GOT NAILI Pass -N- Self resetting thermal- protector HI 4991C Plaster-frameRegrsdlocking crew dr Thru— Bar Hangers deactivates fixtureifoverheating Regressed gums hanger b screw for occurs due to improper l'amping. • securing hangerbars from Bar Hanger Features include: 4' Insulated Ceiling below the ceiling • Pre-installed nail easily installs Labels Six cutouts for easily crimping in regular lumber, engineered AIR•TITE lumber and laminated beams UL anon' sted for Damp Low -Volta e • hanger bars in position Location g • Halo name embossed on • Safety and guidance system • UL/cUL listed for Feed Through Recessed Housing + plaster frame prevents snagging, ensures • UUcUL listed for'Direct Contact SLIDE-N-SIDETM Junction Box smooth straight nail with insulation and combustible penetration and allows bar material • `Four 1/Z' trade size conduit hangers to be easily removed if Meets•following requirements: 4- TRIMS knockouts with true pry -out necessary. • State of WashingtonEnergy slots positioned -to Automatic levelling flange Code accommodate straight conduit aligns the housing and lets you• CaliforniaTitle 24 Low efficacy FOR USE IN runs.' r hold the housing in place with IuminairelCand AT INSULATED CEILINGS • Slide•WSide "' .wire traps one hand while driving nail's requirements allow non-metallic sheathed • Housing can be,positioned at - International Energy cable to be installed without any point within 24" joist span FOR DIRECT CONTACT Conservation Code (IECC) tools outsAccepts without removing •Score lines allow "tooless" • New York State Energy WITH 1NSULATION knockouts. Accepts a wide shortening for 12".joists Conservation Code (NY -ECC) f range of non-metallic • Bar hangers may • Certified under ASTM -E283 for sheathed cable. repositioned 90' airtight construction -Allows connections to be made • Bar hangers do not need to be Q outside the junction box /%/%40 1 • t G' with all trims listed P LCC 1055 Ad'usick" Mirror Ugld . ' LAI' 05 Sprocd R611edx included! 30•-90'tit . 4-3/4. O.D.(121 mm) r ' ' Witt. A sin• It taro„! Ceiling opening 71/4' 116pmml Top View -ILI 91121 1241mml 13- . [356mm1 Ready,For Insta!lag� UPGRADE FEATURES: • SLIDE+NSIDE— JUNCTION BOX • GOT NAILI— BAR HANGERS • PASS-N=THRU— BAR HANGERS • REGRESSED1OCKING SCREW • HALOID ON�PLASTERFRAME LITE 13 HALO/ H14991CT/1419P/L•R-0202 Hexcel Louver 50W/1 2V MR16 Lamp NIGHTSCAPING 4" recessed low voltage fixture with adjustable (maximum) pinhole trim and integral 1.2V transformer HALO" DESCRIPTION, An M14991C family housing with an integral low voltage transformer that supplies -l2 volts to MR16 .lamps. The H14991C is•for installations where the housing will be in direct contact with insulation. The H1499 Air -rite housing also meets restricted airflow requirements.The H14991C is a suited for use in insulated ceilings in residential" and commercial applications. DESIGN FEATURES - A... Outer Housing •Simply insert the cable directly removed from frame for Double wall aluminum into•the trap after connections shortening construction for greaterheat are made. • Integral.T-bar clips snaps onto dissipation.714114991C housing is • UL Listed for through branch T -bars - no additionalclips Basketed to prevent airflow from circuit wiring (maximum 8 required heated or air conditioned spaces. No. 12 ga.,90'Cconductors). E -.-Transformer B•••PlasterFrame •Accommodates the following standard non-metallic 120VIntegralma magnetic g Galvanized steel construction. sheathed cable sizes: transformer steps line voltage The housing:can'be removed (US) #14/2.#14A3,#12/2,#I2/3 down to lamp operating voltage. from plaster frameto.provide (Canada) #14/2,#14/3,#12/2 G•••Thermal Protector access toPlaserfra efeaturesin l Plaster frame features include: D•••GOT N41L1 Pass -N- Self resetting thermal protector • Regressed lockingscrew for Thru— Bar Hangers deactivates fixture if overheating securing hanger bars from Bar Hanger features include:' occurs due to improper lamping. below, the ceiling • Pre-installed nail easily installs Labels • Six cutouts -for easily crimping in regular lumber, engineered . UUcUL Listed for Damp hanger bars in position lumber and laminated beams Location • Halo name embossed on • Safety and guidance system a UL/cULlisted for Feed Through plaster frame prevents snagging, ensures • ULIcUL listed for Direct Contact SUDE-N-SIDE— Junction Box smooth straight nail penetration and allows bar with insulation and combustible • Four 1/2" trade size conduit hangers to be easily removed if material Meets following requirements: knockouts with true pry -out slots.positionedto necessary. Automatic levelling • State of Washington Energy accommodate straight conduit aligns the housing and lets you Code • California Title 24 Low efficacy runs. • Slide -N -Sider" wire traps hold the housing in place with one hand while driving nails luminaire IC and AT ' allow non-metallic sheathed • Housing can be positioned at requirements • International Energy cable to be installed without any point within 24' joist span Conservation Code (IECC) tools and without removing knockouts. Accepts a wide • Score lines allow "tooless" • New York State Energy range of non=metallic shortening for 12" joists Barhangers may be Conservation Code (NY ECC) sheathed cable. repositioned 90' Certified under ASTM -E283 for airtight construction • Allows connections•to be made Bar hangers do not need to be outside the junction'box n .......... .............................. ...................:.... 7 114' 1184min1 '4,1R• I '.Top V.low I I114mm1.I. Cell' ••--�� open, -04II' 1241mml 13' H14991C 4" Insulated Ceiling AIR-TITE Low -Voltage Recessed Housing 4" TRIMS FOR USE IN INSULATED CEILINGS FOR DIRECT CONTACT WITH INSULATION azo V •• with all trims listed Ready For fny-t��bpn s UPGRADE FEATURES: • SLIDE-NSIDE— JUNCTION BOX • GOT NAILI— BAR HANGERS • PASS-MTHRU— BAR HANGERS • ,REGRESSED -LOCKING SCREW •HALO ID ON PLASTER FRAME LITE B Trim HALCI I +�DESCRIPTIO.N: ;Pinhole Baffle lrlm'for 12V low,voltage 4-. H1499 family recessed housings.,,* Dle'cast trim ring with baffle; Trim ring available In a varlsW of finishes '. Three cat's paw' springs secure trim in housing.. ,DESIGWFEATU,RES ,. r Cast aluminum trim ring available In Matte White,Sliver,-Satin Nickel, Antique Copper or Tuscan Bronze finishes: Baffle available 19 Black.or _ White Three;pressurespringsensure posltive retention In housing.' 1419 is designed for usewith the following smallus aperture hohigs;' Llne_Voltage Housing - "" i '� , _ _. ;.-', 'H 1499T .60W 12V MR18 H1499RT : 60W 12V MR16 1419P „- 1419W t H14991CT :60W12V.MR16 {, _ rBlack Battle with . White Baffle w1t6 H1499T76 -,76W 12V MR18 White Trim Ring White Trim Ring -- t1419S 1419SN ' Black Baffle with Black Ba" lfle with ^� Silver Trinn Ring Satin Nickel Trlm Ring � 'ld8mml14-1 + \ . ,rr.r 1129mkn1 _ 1,419AC _`1419T8Z Black Baffle with ,Black Baffle,wlth Antique Copper Trim Ring 4,T6bcaii Bronze Trim Ring + P.inlole.Baffle Trim 4" TRIMS Trhri 1419P- Blecktaffi ; White Trtm.Ring /419W= White Baffle, White Trim Ring 1419SL= Black Baiie;'Sllver7rim Ring 1419SN;'81ack Baffle, Satin Nickel Trini Ring 1419AC� Bieck Battle, Antl'4" Copper Trim Ring 1419TBZ- Black Baffle,Tuscan Bronze Tdm Ring �f LITE C/C1 HALO H991CT%999CG C:SOR20/FL 4" recessed IC -rated incandescent fixture with C1:50PAR20/FL ` internal specular trim in champagne; halogen lamp DESCRIPTION The H991CT is a small aperture housing for accent and task lighting. It is designed'for use in insu'latod'ceilingswhere it will be in direct contact with insulation. It isan AIR-TITE housing designed'to prevent • air flow between living spaces and unconditioned areas. • DESIGN FEATURES ' A ... Outer Housing sheathed cable the standard removed from frame for Aluminum construction 'fielps cabletypes used in lighting for shortening • dissipate heat both U.S. and Canada. Allows wiring connections to •Integral T -tier clips snaps onto B••• Inner Housing be made outside the T -bars - no additional clips required' Double wall aluminum junction box + construction helps dissipate Simply insert the cable F•••Socket heat. The inner housing can be directly into the trap after connections are made Fixed position porcelain socket adjusted' in the,plaster frame toaccommodatos - the following with nickel plated brass screw compensate for different ceiling stand ard'non-meta llie shell provides consistent lamp materials: sheathed cable types: positioning. C•••Plaster Frame (US)#1'4/2,914/3,$12/2,912/3 (Canada) #14/2,914/3, #12/2Self G•••ThermaltProtector Galvanized steel construction. resetting thermal protector The housing can'be removed E •.."GOT NAIL[ •Pass -N- deactivatesfixture if " from plaster frame to provide Thru— Bar Hangers overheating occurs due to access to the junction box. Bar Hanger Features improper-lamping. Plaster frame -features include: include: Labels • Regressed locking screw for securing hanger bars • Pre-installed nail easily installs inregularlumber,engineered - UVcUL Listed for Damp belowtheceilinglumber and laminated beams Location " • Six cutouts for easily crimping • Safety and guidance system • UL/cUL listed for Feed Through hanger bars in position prevents snagging, ensures • UL/CULlisted for Direct Contact t s • Halo name embossed on smooth straight nail with Insulation and combustible material plaster frame penetration and allows bar Bangers to be easily removed Meets following requirements: C•••Ju' nction Box if necessary. California Title 24 Low Efficacy • Listed for through branch -Automatic levellingflangerequirement Luminaire IC and AT circuitwiring • Positioned to accommodate the aligns the housing end lata you q • State of Washington Energy straight conduit runs hold the housing in place with Code Seven 1/2"trade size conduit ` knockouts with true pry -out one'hand while driving nails • Housing can be positioned at International Energy Mots , any point within 24"joist span Conservation Code Slid" -Side'" wire traps . Score lines allow "tooless" • Now York State Energy allow non-metallic sheathed shortening for 12" joist's Conservation Code (NY-ECCC) " cable to be installed'.without .:gar'hangers may be • Certified under ASTM -E283 for tools and without removingair-tight repositioned 9o" construction i knockouts. Accepts a wider range of'non-metallic •Bar hangers do not need to be c f A . • s ........ ........... ....... a aemml as E 0 �----_—_---- a — —0 4 11,V Itoanml • Top View e• [r62mm1 a err 12ramml HALO' H991CT 4" Insulated Ceiling AIR-TITE* Recessed Housing 4" TRIMS FOR USE IN INSULATED CEILINGS FOR .DIRECT CONTACT WITH INSULATION air with all trims listed Ready For lnstallahon I LITE C/,C1Trim.'y = ; .HALO `DESCRIPTION.- - - - . Reflector VirtiYor 120V .lute voltage, 4" H99.fanft recessed housings: Die cost :. • .. _ ,. - - . , tram ring with metafreflector. reflector and trim ring a4aflable'ut a variety of ' _ `.Three "cat's past, apnngs securo tMi in housing. _ .. .. .. ;OESIG'NTEATURES` Cast Wutninum trim ring available in Matte White, ;-Satin Nickel,'Antique i Copper'or Tuscan Bronze finishes.. Reflector available In Clear SpecuWr, Gold, Black, Hole. Satin NickelAntique Copper and Tuscan' Bronze.-- Three,pressure springs ensure positive retention In housing.'"' - 999.is desrgned for use vri_th the foflowirip omatl,aperLrre housings; • Llne Voltage Housing - H99T.' `-* 40W R16, 40W A19, 0W R20,15M PAR20. :H99RT. ..40W R16, 40W A19, 60W R20, BOW PAR20 , ' H99, 40WRI 40W A19, 60W R20, SOW PAR20 t F� 167JY J mmj' ,� = • 6•l6' .. , :1129Vmm1 j' Tdin '.999; Clear Specular'Refleotor, White Trim Ring 999Rdm Gold Speculei.Reflector,,WAjtaTrim Ring . 999M6 Black 6j;4eular Reflactor,Whito Trim Ring 999H- Haze Retlector, White Trlm Ring 9995La CI ea r Specular Reflector `Stivor Trlm`Rf n0 999SN=Senn Nlekel Reflector; Settn Nickel -Trim Ring 899ACe Antique Copper Refleetor,A.ntiquo Copjier Trim'Ring 999TBZ TusceriBronzeflenector;TuscanBronieTrim'Ring 999 _ .999SL 'Clear Specular Rofloc[o�ialth {ClaerBpecularRofloctorwitIh White Trim Ring ;Silver TrimRing 999RG • 999H Gold $pocular Rviloctor with;Hazq ieeeaor with White -Trim Ring - White Trim Ring. 999M 8 999AC Black _Speiular Rofioctor with r Antique Copper hefloctor with White Trim Ring ' Antique Copper Trtm Ring 999M6 999M6 Satin Nickel Raflei aor with Tdii 6iaiiiea ,Reflector with Satin Nickel Trim Ring - "Tuseemt3ronzo Trim Ririg 989 Mitlector Trim A TRIMS t • r LITE CF IRIS - P51VI32TE-5TG 5" open reflector compact fluoresent downlight with. specular trim In gold IRIS CATALOG#: TYPE: DESCRIPTION Haze Specification grade 32 Watt tripletube compact flu- color, long life, and tow radiant heat. Dimming and orescentfixture rated for direct contact with insula- emergency ballast options are available. Lamp tion. The 50' cutoff to lamp and lamp image pro- t vides a glare free, smooth, medium beam. Installation to provide a •variety of lamp sources distribution. Triple tube lamps provide excellent and distributions. e.g. into a PAR36 adjustable t • r LITE CF IRIS - P51VI32TE-5TG 5" open reflector compact fluoresent downlight with. specular trim In gold IRIS CATALOG#: TYPE: DESCRIPTION Haze Specification grade 32 Watt tripletube compact flu- color, long life, and tow radiant heat. Dimming and orescentfixture rated for direct contact with insula- emergency ballast options are available. Lamp tion. The 50' cutoff to lamp and lamp image pro- module and optical element can be changod'after vides a glare free, smooth, medium beam. Installation to provide a •variety of lamp sources distribution. Triple tube lamps provide excellent and distributions. e.g. into a PAR36 adjustable F ..._ eam- -SPECIFICATION FEATURES •1172mm1 Haze A•••Reflector !••• Electrical ' 040 thick aluminum spun parabolic reflector in Keyed quick connect provides easy lamp module iridescence -free Clear, Gold, Haze, Warm Haze installation. Alzak•or painted Gloss White finish. Special, cone G ... Frame/Housing colors listed below Hot dipped galvanized 20 gauge steel frame B•••Flange with built in ll2.inch plaster lip. Gunsights allow ' Self flange reflector or die-cast flange with either -for consistent alignment. Aluminum .032 thick matte white or clear coat finish. Die-cast flanges housing allows for heat dissipation and reduces are easily removed for field painting. Elements weight. are keyed for proper insertion. H ... Junction Box C -_--Attachment 18 cubic inches, listed for 4#12 AWG or 6#14 AWG Psitive torsion springs pull flange tight to W C additional feed through conductors, has six ceiling. Mechanical. light trap eliminates spill light 1/2 inch pryouts. at edge of flange or reflector. 1•••Bar Hangers 0 ... Socket No Flex* bar hangers with positive locking, for 4 pin G24g3 base for 32W PLT, TBX and TTT use with wood, engineered wood and steel frame lamps. Fatigue free stainless steel spring ensures joists spaced up to 24' O.C. ship with platform for positive lamp retention. Fixed socket height use in T -bar ceilings order accessory MSCLP clips. ensures consistent lamp position. Nailess!barb and locator lip provide consistent E.. -Electronic Ballast installation height. Thermally protected, current controlled electronic Codes ballast produces full light output and rated lamp Thermally protected, IP labeled, for use in direct life. For 32W and 26W triple tube lamps. Provides contact with insulation. Meets Washington State flicker -free and noise -.free operation and starting Airtight requirements, 1995 CABO Model Energy with 120 or 2T7 volt input. Meets stringent Class B Code. requirements,FCC part 18, for non -Commercial Labels applications. M32T'Lutron for use with 32W lamp UL and cUL listed, standard damp label, only. MEW union made. SEEN Completeu Vt consists ofs platform, module and skmam - Lamp Optical Platform M'od'ule Element Finish Flange Accessories P5 M32T ;Pr [P.-r-21" M32T.32/26W • .EST. 5- Standard Custom Goat. , Btank.Whlta : MBCLR.40 Push ht IC -Compact Downlight C.Clear CCH.Chocolata dlocast On T Bar Clips FluorescentReflector 'H -Haze Haze SF.Soll '(for 10 Units) rp Ballast " M32TLutron.G.Gold BU.Blush Flange PLES.Plastor TU Wlro 'WMH.Warm Haze BUI-Blush Haze RAW -Natural . ;Lip Extension 32W .32W TU la W.Glosa White GP.Giaphlto . Die-cast for Max 2' Thick Dim ' 'Ballast MW.Matto White GPH.Graphito .. SFWF.Seif Coitlng . 32W Triple CFL/35000K icustom Haze Flange : FMCS. Flush I`Mount. Collar �K.Cop nac PN -Pine tPaIKe ,m—cognac Haze PNHirPine Haze White For ffmrgency option otdsr p632TEMER and CC.Cnocolata SK -Sky ord COOPER LIGHTING SKH.Sky Haze addESTitional onsorwalact�r pi— S fit Ul P5 M32T EST 32W TRIPLE Compact fluorescent 6" DOWNLIGHT 4011 �lrtirtij��l2satnm CelOq cutout s tis (lsasan ENERGY DATA M32T Input Power. 120V . 36W input Current (Max): •120V ..306A Power Factor. 120V.>.98 T.H.D.: 120V <10-S M32T Lutron Input Power. 120V . 36W Input Current (Max): 420V ..33A Power factor. 120V.> 25 T.H.D.: 120V.<201: ADM=02 e^ [229.m1 IS 1 I I 4011 �lrtirtij��l2satnm CelOq cutout s tis (lsasan ENERGY DATA M32T Input Power. 120V . 36W input Current (Max): •120V ..306A Power Factor. 120V.>.98 T.H.D.: 120V <10-S M32T Lutron Input Power. 120V . 36W Input Current (Max): 420V ..33A Power factor. 120V.> 25 T.H.D.: 120V.<201: ADM=02 r. LITE DF IRIS , ; ` P7/M32TLutron/E7TG 32W Triple CFL/3500*K • 7" open reflector compact fluoresent downright r ' ,with specular trim In gold and dimmable ballast Ibis CATALOG*: TYPE: DESCRIPTION' Specification grade 42 Watt triply tube compact color, long life, end' low radiant heat: Unit can 6 � fluorescent fixture rated,for direct contact with be relamped from above. Lamp module and insulation. The 50' cutoff to lamp and Tamp image optical aliment can be changed after installation provides a glare,free, smooth, medium'beam to provide a variety of lamp sources and distribution. Triple tube lamps provide excellent distributions. s.g.'irnto a PAP36 adjustable n ........... ... ...... ..... ....:.:.:.......... .......... .. R... _..... _....... ....... _ P7 M32T �............. ......... .... r. . E7T o•.. .•... ...... •.• r eaa L` • 73Y• 42W Triple p97mm]: 8 2 W Triple SpECIF1CATIOM FEATURES 12110-44m1 Compact Fluorescent A•••Reflector F•••Electrical. r .040 thick slurrninumspun parabolic upper and lower Keyedquick connect provides easy lamp module 7" DOWNLIGHT reflector. Upper reflector is specular clear, lower installation. reflector ova ilable in indescemfree Clear Gold,'Haze, G••:Frome/Housing -Warm'Haie Aliak`,or,painted gloss white'finish. Hot dipped galvanized 20 gauge stgel-frame with r Special cone colors Rsted below• built in 112 inch plaster lip. Gunsights allow for B • • •F l Ong:. consistent alignment. Aluminum .032 thick Self flange reflector or die-cast flange with either housing allows for heat dissipation and'reduces matte white or clear coat finish. Die-cast flanges weight. Top is removable for above ceiling access. 1, are easily removed forfield painting. Elements are Imo keyed for proper insertion. IS cubic cinchtion Box 7� 18 cubic inches, listed for 4412 AWG or 6#I*AWG �e1F4 12 ve, C ••Attachment 90 C additional feed through conductors has six 183'1. 1210rnmt t312rnm Positive torsion springs pull flange tight to 1l2 inch pryouta. (a2amml\� ceiling. Mechanical lighttrap eliminates spill Ccilrg Dutoa fight at edge offlange or-reflector. The fine 1 Bar Hangers 7TC(197min) No Flex` bar hangers with positive locking, for use ENERGY DATA reflectors are keyed for top relamping. with wood, engineered wood end steel frame D•••Socket joists spaced up to 24" O.C. ship with platform. MIM 4 pin G24g4base for 42W PLT, TBX end•TTT For use in T-.ber ceilings order accessory MBCLP Input Power.. 120V - dsw lamps (G24g3for32Wfamps). Fatigue-free clips.'Nailess barb and locator lip provide consis- Input Currentimax): stainless argil spring ensures pasitnre'lanlp tent120V -.45A instellation height Power Factor. 12UV ->:99 M retention. Fixed socket height ensures consistent {, lamp position. ' Codes T.H.o.: 120V 10-A Thermally protected; IP labeled, for use in direct M32T E•••Electronic Ballast contact with insulation. Meets Air tight require- Input Power. t2o1/�3eW Thermally protected; current controlled rapid start merits, 1995 CABO Model Energy Code. 3 ballast produces full light output and rated lamp Input current wax.): fife. Provides flicker-free and noise-free operation Labels 12DV -.306 , end'startingwith120or277voltinput.Meetsstrin- UL and cUL'listed, standard damp label, AowerFactor. 120V_>.9e non—Y gent Class B requirements, FCC part IS, for commercial applications. M32T Lutron 11 Input Parser. 120V 36W input Current (Max): ORDERING INFORMATION • Complete unit consists of e.ptatform, module and element 120V-.33A Power Factor. 120V - a t96 Optical T.H.D.: 120V <20% Platform Lamp Module Element Finish. Flange Accessories ' P7 rijAIM U42Ta,42W rRM. T• .Standard Custom Cont: ;8lankcWhite 'MBCLPa4o PushMdC Compact Tube C=Clear CG-Choeolam Dleeast 0nT8grCgps r FluoreseentBallast ight W=Haiti CCEIsChoeolamHaze SF=SelfFlange '(1brtoUnits) tor PLE7-Plaster A132Tm32f26W . - G-Gold BU�lush RAW=Natural 'Compact WMH:Warm Haze BUHlush Haze Die-cast Lip Extension FluorescentBallast W�loss White GPsGra hlte SWF=SeN Range fon Max2* Thick c }�, N92nmtron-32W BsBladc GPH=Grpaphite Haze Painted Whim g CelMg ITu Wire Dimmable MW:Nlatte Whim PN.Vine Ballast(32Wlamp custom PNI PlneHaze ionly) K=Cognac SKa51iy Fcr En,arrggaRay ORion order 073ZifiMER or r P742 TEMER Rand - one alta .for oder- , KH—Cognac Haze SKH=Sky Haze i^8 irdonnation. For additional o morn COOPER LIGHTING plaaw conaah faotory. A01030703 LITEFX JL FOCUS IND. SL-24-MRI6-BRT 3SW/ 12V MR16 Lamp recessed low voltage steplight with eyebrow; (maximum) to remote 12V transformer. Fixture to be mounted at approx. 14 inches above finished step. Specified in Bronze textured finish. SPECIWATIONs BACK BOX HOUSING: Heavy duty stamped aluminum with eight 1/2' knockou%white finish FRONT COVER: Cast aluminum LENS: White high impact acrylic,linear spread glass for SL-24-MR16 GASKET: Black neosponge 0.190- thick closed cell REFLECTOR: Highly polished speculaT aluminum LAMP -5424, SL -24 -ORS: 18 watt S-8 61141 (35 wattmax) SL-24-MR16, SL-24-MR16-BRS: 20 watt MR 16 (BAB), (35 watt max) SOCKET. Single contact bayonet base (Sal 5s) -brass nickel plated screw shell and spring (12v.),, bi-pin GU5.3 MRI 6 ceramic with 250' C lead wires (12v.) LAMP LIFE: 1200 hours average rating for S-8 #1141,5000 hours average rating forMR16 WIRING: Black 5 foot 18/2 zip cord 112v only) CONNECTION: FA -05 Quick Connector (not supplied) from fixture to main cable (12/2,10/2 or 8/2 only) FINISH: Optional finishes available ORDERING INFORMATION CATALOG NO. DESCRIPTION SL -24 Cast aluminum step eyebrow SL-24-BRS Cast brass step eyebrow SL-24-MR16 Cast aluminum step eyebrow SL-24-MRl6-8RS Cast brass step eyebrow � s � .. i 7. px v 1 SL -24 3. J325- �483— 76mm 3' 4 76- 0 SL -24 LITE�� L LUMIERE 203BZ/TM056Z/VR 50W/12V MR16 Lamp beam mounted adjustable 12V landscape fixture (maximum) with tree mount canopy, hexcel louver, to remote 12V transformer DESCRIPTION LUMIERE" _ _ - Cambria 203 is an ultra-compaet MRIO low vohagehologon fixture. It is - available with a fully adjustable aide swivel atom (203, 203 -FL). an adjustable center rear swivel (203-CR^ul or stationary rear flush mount (203-FMi. �•}� Various lances. louvers and color or dichroic filters can be combined - up to three at once -to create multiple lighting effects. Lumiari a exclusive Siphon Protection System (S.P.S.) prevents water from siphoning Into the fixture a ; - through its own lead wires- : SPECIFICATION FEATURES - A... Material B ... Finish Painted G ... Mounting Stem Housing.hood and mounting stem Fixtures constructed from 8001-T6 Modol,203 and 203-FLinclude fully are precioion-machined from aluminum ore double protected by adjustable side -mounted swivel corrosion -resistant 6061-T6 a chromate conversionatom, providing 340` tilt and 360° aluminum billet, braes• bronze• undercoating and polyester rotation for easy aiming. Center f copper or stainless steel. powdercost paint finish, rear swivel (203-CRS)or stationary C surpassing the rigorous demands roar flush tush models of -the outdoor.environment- A are also available. All models variety of standard colors are include 1/2" NPS threaded male available. fitting. Stainless steel eim-locking mechanismo are standardlnot C ... Brass. Bronze, Copper or available on 203 -FM). Lumibrs o Stainless Steel exclusive Siphon Protection Fixtures constructed from breco. System (S.P.S.) prevents water GL)►IVI BF1I/\ bronze, copper or stainless steel from siphoning Into the fixture are left unpainted to reveal the through Its own lead wires- - ^ natural beauty of the material- 203 t I �t,, mt^, i tri• Breso• bronze and copper will H ... Hardware (tta„ml patine.natu rally over time Stainless steel hardware is standard to provide maximum 5OW (max.) PARI G D ... Hood corrooion=recictanee. Halogen e Hood is removable for easy Low Voltage C��e •1 relemping and accepts up to three .I ... Socket internal accessories at once Ceramic socket with 25(r C (S� ^^ Bwt—I (lenges. louvem, filters) to achieve ToflonS coated load %vires and Accent/Flood multiple lighting effects. Model GU5.3 bi-pin base. 203.203 -CRS & 203=!`M: Weep - holes prevent water and mineral J... Electrical ataino from collecting on the Iona, Remote 12V transformer required 15`7-4, 2-1.4.il•� / \ even in the straight -up position. (not included). Available from Ha'rmmt Model 203 -FL- The flush lana Lumibre as an accessory - see the design reduces fixture length, Accessories & Technical Oats \ minimizes debris collection and section of this catalog for details. / prevents water andmineralsteins from collecting on the lens- K ... Lamp _ - Not included. Available from o E ... Gasket Lumi6ro as an necessary - see 1-719' S Iterml Housing and hood ere sealed with reveres side of this page. ZW-CRr ICenter beer a high temperature silicone co -ring L ... Labels 8 Approvals Swivetl gasket to prevent water intrusion. UL and cUL listed. standard wet F ... Lens label. IPE5 rated. Manufactured to Tempered glass lens. factory ISO 9601-2000 Quality Systems o]-1J�•/� �� seated with high temperature Standard. IBEW union made- t67nint 1•tJT adhesive to prevent water Approved by New York City Dept - intrusion and breakage due to of Buildings. Bureau of Electrical thermal shock. Control for use in NYC, NY. Cambria M ... Warranty ms era, Lumibre warrants its fixtures (Ft—h M—fl against defects in materials & workmanship for three (3) years. - 'Auxiliary equipment ouch as transformers. ballasts and lamps 02 11a'7� ^ carry the original martufacturer s tsrm�.�t carer IeQmml• \ , W05 -W e — -3-7%e° x 2- 498mm x 51 mm) oa�,(a Iiia Rectangular tree/su facevno6ni'.v ith self MJiL contained wiring compartment and through' (limb Cam! ' wiring passages - ' Side swi.rt eti t ; Specify finish (BR BZ, CS,w, WT), • LITE LU ATOM *- Positron #0247-C brass matte Q50MR16/C/FL40(EXN). r �' f i ` • flush to -grade adjustable uptight trequi'res MAX, r.� r'• ` ' remote 12V"transformer .' F � , La - composite weather tight well housing ` r t Bottom view • '1 /2" brass threaded conduit ports 1/2" bross.pIUg l ` O lid assembly and glosi lens • vertical adjustable lamp bracket (b. b top view . compression seal hex fastener o o r r t • lid assembly and gloss lens • O • compression lens retaining device section • angular adjustable lamp bracket t Installation finish grade .4.75' •,mo16 BAB lamp &'lens accessory skieve 4 ( pt• a <awatu( ,• •.lamp replacement spring clip hex Fastener to • teflon wire &'lamp socket - ` composite'houstng t� • low voltage cable with recommended + composite weather tight : • — B' bop coded at bottom of fixture housim • i well housing` t y 1'/2" brass plugs , • S d_ , ' G • '. a.'t•.-F•�y '. .11.1 � • I. .11 1 y' l II 111: t — NOTE; install this fixture in well drained 4' areas. although water. Cdo not install F a •-ss "^ • ` _ In locations that are subject -to standing • s water, os the$ixture is not designed'os o ? y • submersible lamp enclosure. RB ROBERTS B -series, B-1.8-1 E -length 10.8W/ft STEPLIGHTING U -channel extruded linear lighting = requires remote 24V transformer, length to be field verified (product in top of beam -route out channel for product placement) feed individual fixtures seperately from transformer to avoid voltage drop 6= Series Cove:G Life --- Designed for cpnvenience in.app lications.'of Cove Lighting: Sixam 1ps per fooV2 ,_o c spacing' Specify 9 Watt Lamps (15,000+, Hours); 1.8 Watt Lamps' (10,'000 hours)'or 2,8;Watt Lamps "(5,000+ hours)'.- Re clamp capMc for, years of continual service Lowtemperntureof lamp allows for,�eaamping wtth'`systerri'on,. Available maximum 20'-O ;length for 9,`Wattor'1.8,Watt Lamps: Available maximum 1,0 -0 length for2 8 Watt Lamps Fixture is: available'tn;oustom length -or may;be�field cufto sl often Fixtures are 24 volt Widespread 1 ght distribution�in'eitheLr_hor¢ontal or ver cal positions Lamps wired in parallel; mounted in polyvinyl `extrusion - ready •for installation FoFL;ktra lonb�i;Uhs, two 20 lengths can be'.centei fed' (9 Watt Lamp"and A.8 Watt Lamp' only) 'Pan be dimmed on primary side of step down transformer; Visible surfaces of the extrusion may be painied to .. match ar,,become;a part[ of tke molding lest- , "" _ _ ._ Fac4ory kerfing for radius applications(possible additional cost)' Mounting'holes:pre=drilled for'ecrew.or'nail'uttachment< 'SERIES. s� 13z. -Series. Cove Lite —LINE OF .WALL EXTRUSION`, WQX 11 Designed for convenience i6 cove lighting applications, Roberts' B -Series extrusions are the perfect solution for ,highlighting ceiling moldings whose beauty may not be adequately enhanced by normal lighting. The'B-Series is piiailable in a choice oflamp wattage,. and may relamped.with the y systerp'on..As with all Step -Lite Sysfems, the ;Roberts staff is available to assist in design,,prolectJbyout and/or to size transformers forspecificprojects. ,SPECIFY BXCATALOG NUMBERS B •- X2.8 - 2E - 93; j TYPE LAMP. POWER LIGHT CHOICE FEED' LENGTH 113:Series r.9 wattor 1 BWatt 1 E =b_he.End 12",thri12' 40" 2_6 Watt 2E = Both Ends 12- thru 120" 1 )io 8413 Mantlo Avenuo J Oklahoma City, OK 73132 405=728-4895 1-800-654-8268 FAX: 405-728-4878 c» a infoOrobenssteplite:com Y � .}+ ' { '.• � }• t� r " • 1 a ^ ��•"ae 4 LITE RCP ° - r.° recessed clock plug mounted'-@ 63 inches af.f. RL NATIONAL r (2) Runs Light Rope 9 20V 1 /2 Inch S:S watts/.foot (Incl.) SPECIALTIES incandescent linear rope lighting mounted In'cove; two runs of product side-by-side; contractor to secure ' product flat; top of product to align. with top of cove lip ' SCHEMATICS -SPECS Voltage,110VA'C ' Bulb Specifications 3:5 volt,'50MA, A8 watts Average Bulb Life 30,000 hours o • T Bulb Spacing- . 1 • n Centergo . 'Colors .Clear, Ked78l e, Urange,.Green, O Yellow Diameter -1/2"(-,,3m m)and 3/8" (10mm) Lengths KetalFNacKaging'(BilsterPaoked) 6% 12" 18'1 24', 30', 150' awn a.noyu�y �vyvay i'a.nc�/ w� s Diameter CLEAR ONLY: 3', 6', 9" 12', 15', 18',,'21', 24','27% 30','33', 36, 39'; 42'; 45',48', 51'," 54'; 57',,60',,63' 66", ' 69',72" 75% 78';,84, 84% 8T, 90', 93'; 4 96', 99' Interconnectability'Ali iengtns ot=equabaiamete can connecttog ether to a'maxirrium of 450 ft: per 110V ptug, LITE ' S IRIS .' . 'j 7/32TSRG 32W Triple CFL/!3500eK 76. regressed showerlight with frosted lens IRIS. CATALOG&: -TYPE: i .DESCRIPTION, Specification grade wet fisted triple tube compact pattern. Lamp module and: optical element 4 IIII U fluorescent fixture ratedior direct contact with canbe changed'efter installation to provide 6 3/4" LL t insulation: Regressed frosted lens:provides slow a -variety of lamp sources and distributions. brighth.Gas aperture end's smoothillumination e.g. into a PAR35 Adjustable H.. ........ _... ................. .... .... .................... : p �� i - SC.......................... ..:_. ..� ..............................p _ ....... ..... ..... .._.... M42T M32T o-..-...-.._.._.._..._..-..-... • (,7:ntmj E7SR a1•1. SPECIFIZATtON -FEATURES [2110mm1 A•••Refl42W .Triple'eetot G•••Electrieal 320 Triple ".040thick aluminum specular clear upper and Keyed quick connect provides easy Tamp module P spun Parabdlic'loiverreflector 'in Clear, Gold, installation. Haze, Warm Haze, BlackAlzek°finish, painted H•:•Frame/Housing 7" REGRESSED gloss white ortiatatts white. Special cone colors list- Not dipped`galveniaed;1B gauge steel frame SHOWERLIGaHT r ed l;elow. with built in 1/2 inch plaster lip. Gunsights allow B.• •Flange for consistent alignment. Aluminum .032 thick Self; flange reflector orZe cast flange with either housing allows for heatdissipation and- reduces matte white or clear coat finish. Die cast flanges weight. are easily removedforfield'peinting. Elements I ... _Junction Box are keyed for proper insertion. Gasket is a closed 18 cubic inches, listed for 4012 AWG or 8PT&AWG cell -foam. 90• C additional; feed through conductors, has six C•••Lens 132 inch pryouts. [zsb'n 125 thick frosted tons obscures lamp and is retained during-relam i J'- -Bar Hangers P �' No'Flex* bar hangers with lockin for 21 tz -n 9 9. to y,••(210mm �i(312mm] D •• Attachment use with wood; engineered wood and'steel frame tZammj Positive torsion springs pull flange tight to joists spaced up to 24, O.C. ship with platform. aia t� ceiling; -Mechanical light trap eliminates spill light for use in Tber ceilings order accessoryMBCLP at edge of flange or reflector Nailess barb and locator lip provide consistent ENERGY DATA 1 E ... Socket- installation height. 7" AbTighta 4 pin G2444.base•for42W PLT, TBXand:TTT K•••Codes 42W Lamp lamps (G24a3for 32W'lamps).Fatiguefree Thermally.protected, IP.labeled,foruse indirect Input Power. stainless steel spring ensures positivel'amp contact with insulation. Meets Washington State 120V - WW retention. 'Fixed socket height 6risurasconsistent Airtight requirements, 1995 CABO Model Energy input Current (Maxl:. lamp .position. Code. 120V - ASA Power Factor. F•••Electronic Ballast L. -Labels a2ov-00..99 ' Thermally.protected; current controlled rapid start UL listed, CSA certified, standard wet label,_ T.H:D.: ballast produces fill light output and rated lamp IBEW union made. 120V -c 10% life.' Provides, flicker -free and noise -free operation and starting. Meets stringent Class B requirements, 32W Lamp FOC -part 18, for non-cornrnerciabapplications . input P er 120V- saw _ Input current (Max): ORDERING INFORMATION 12Jv-.3008 • • s' Complaw unit maoicro of a platform, modulo and domant - - Power Factor. 1120VLamp Optical T.N.D.s•99 Platform Modulo_ .Element_ Finish. Flange Accessories, I23 -c 10% P7 MI32T Lutron - input Power. 12av asw 1 Standard Custom Cone P7 . 7' Ma2T =420 rF SR i= 9• Blanks Matte h1BCLP s 40 input Cur►errt (Max): AirtlghIt Compact gressad'C=Clear OCH=Ch000late Whftedleeast :!Push OnTBar 12ov-.3iA Rated Fluorescent ns Hallam Mate SF -Self Flange •Clips (for to Power Factor.Flouting Batias4 ov�erligM -Unka1 ;Gold BU68lush RAW=Namnl' 120V ->'.95 M32T a 9YW WMH>jWatm Haze BUM 41ush Haze `; Die-cast PLE7 m Plaster .Compact Gp=Cra hits 'SFWF-Self :Up Extension for-12ov�c20% W-GIoss.White P Max 2• Thick !FluorescentGPH�ra hlte Flange Painted 'Ballast MW�'Matte White .Haze P White Gelling F ,Bs Black ('N= -Pine ~ • .I'M32TLuiron = 32WTu Wlre Custom PNH= ine Ham �. !Dlmmktg .K-Cognsc - For additional cptiom ploaw KH-CognacHazs SKH 4bi Haze °O^ raGeon` CCdChocolats -Matta orhit& is noorn—KI6d . COOPER LIGHTING for will flanged ran.cwm A010108U r r LITE SS IRIS P3MR/.E3AASR 4" recessed low voltage shower fixture with lensed slot trim and integral 12V transformer IR0K IS CATALOG*: DESCRIPTION Specification grade,' wet Dated 50 watt MR18' adjustable fixture rated for direct contact with insula- tiom Adjustment mechanism features hot aiming cape. I bility, alming marks and toeless locking. Optics provide e glare -free 50e cutoff to lamp and lamp Image For use with all halogen MRIS lamp varlaties. Optical elm eent ` can be changed after Installation to provide a variety 0 distributions. e.g.'Into a Downight _ A•••Reflector .040 thick aluminum spun parabolic reflector In Clear, Gold, Haze, Warm Haze, Black AIzW finish, painted gloss white or matte white. Speclal cone colors listed below. s ... Glass .125 thick tempered glass protects lamp from direct spray of water, and is retained during relarnping, C -•.Flange Seif• flange reflector or die-cast flange with either matte white or dear coat finish. Die-cast flanges are easily removed forflald painting. Elements are keyed for proper insertion. D--�Adjustablllty Removable lamp adjustment mechanism provides up to 45e tilt and 381 a rotation and locks Into any aiming position. Unit Is relamped without unlocking adjustments. Translating centerbeam optics maxi- mize light output. 11—Lana Soft focus lens standard for smooth beam patterns. Up to two filter media can be used which aro retained during relamping. F- -Attachment Positive torsion springs pug flange tight to telling. Mechanical light trap eliminates spill fight at edge of flange or reflector. 0- t socke GX5.3 base for Si -pin MR 16 lamps. Back light shield keeps Interior of fixture dark. H ... Transformer Truvolts toroidal transformer with dual -output taps forproper 12.OV operation. Dimmer tap compeo- sates for Inherent voltage loss from dimmers, resuhing In 30% more lumens than traditional lams- nated'trsnaformars. Toroidal design, with 9096 or greater efficiency, features a to one-piece con- tinuous core of M3 grade grain oriented silicon steal complete with an Integral thermal to protect SOW/12V MRI 6 Lamp (maximum) TYPE: —e A tem o:D. a. ns. t. a 7n• against overheating and ensure quiet operation. For dimming, use dimmers rated for electromagnetic transformers. Transformer Is warranted for 5 years and is serviceable frorn below eating. Note: If a dimming system is operated• for con. struction lighting In its 'shunt' mode, i.e. bypass - Ing the dimmer modules, for an extended period of time, fixtures with the dualAap toroidal transformer should be operated on the 'Switched Fixture' Out- put until the dimmers are In use. Operating fixtures on the 'Dimmed Fixture' output with • .full 120v Input for an extended period Will overdrive the lamp and cause shortened lamp life. I... Electrical Keyed quiclk connect for. low voltage socket lead. Transformer Is serviceable from below ceiling. J... Froms/Housing - Hot dipped galvanized 20 gauge steel frame with built In 1/2 Inch plaster lip. Aluminum .032 thick housing allows for heat dissipation and reduces weight. - K••.-Junetlon Box 18 cubic inches, listed for 4012 AWG or 8014 AWG 90e C additional feed through conductors, has six 112 Inch pryouts. L•••Bar hangers No Flex bar hangers with positive locking, for use with joists spaced up to 24' O.C. ship with plet- form: For use in T -bar ceilings order accessory MBCLP. Nallesa barb and locator tip provide consis- tent installation height. IN ... Codes Thermally protected, IP•labeled, foruse in direct contact with insulation. Meats Washington State Air tight requirements, 199.5 CABO Model Energy Code. N-••.Lobsla UL and cULTsted, standard wet label, [SEW union, made ORDERING INFORMATION .. .. ' Comtplote unit consists of a,platrorm and elomeru Optical Platform Element Finish Flange P3MR ESAASR P3MR E3AASR Bow MR -!e 3'• ADJUSTABLE SHOWER t22anrni 16 31f7 7/8' 14O1rrrtnl' 128•tmnl a are- 11112.11n] � ENERGY DATA 120V kkprt Lamp .Input Operating .wette. .watts...Currern -20 23 -- .19 35 41 .34 37 42 .35 42 47 .39 80 57 .48 orlon P3MR -� 3' F R I �Statdan! KH -Cognac Haze - `Blank: white MBCLP 40 Push On T LISTRAW Light Straw Alrtlplu.K: Ramd18 O - C -Oea CC-Chocotate Custom dis:east Bar GRps (tor t0 Unita) fans Low Voltage W- WHMO , ;SFS Self : PLE3 - plaster`Up L27K - 2700K dkdvoic fll-CCH Chocolate HasHousingahlaG-Gokl BU -84dt {M Extatsbn-.for Max 2' -tar P3MR REMOTE . 'yypm.i Wen BUH �8LOt Has RAW - Natural - Thick Calling WAY - Daylight Lars 3' Non4C Haze Diseast LSPD - Spread Lan��for or W+Gloss white GP 'SFWF- Solt LLNR -.Lbww Spread Lens K 8urpdse Weft Remoty QPH.GrapNb H. :.Flange Painted Lana Trarotorrtta -BMW- Mama PN-PIrn :.Matta whdto LPLAV Pact Lavender white . PNH Pita Has LUV W Reduction Lens Lens I B- Slack SK -sky LIPNK - tight Pink Lens LHDt-.Marx CW louver Custom SkYCOOPER LIGHTING K-Cognse SKH Har. Far addik and apeone pleese,ckna/t factory. ADp425a3 Mme whlb Is reosmr w%W for sea Mooed reflectors I ' t' r Y 1 • i 1• '�' LITE `T# 12V dimmable magnetic type transformer for hard -wire installation,; y for use with 12V fixtures requiring REMOTE transformer U# FAIL-SAFE MTT-xx-1+20'-CEX-dimmable ballast-RSW • FxxT8/'SP30 fluorescent undercabinet task fixture with opaque front, rocker -switch and dimmable ballast ( -7 MOUNTING A , • , �a —�' i' �• : �l � • A B C TT T4/2' 67/16' 2411.16' �+ + (17WTB) (39mm) (138mm) (611mm) MW 11/2- 6 7/16' 36 1/16' (26W TO) (39mm) (138mm) (916MM) MTT 1 1/2" 6 7/16' 48 1116 ' (32W T8) (39mm) (138mm) 0221mm) MIT 11/2' 67/16' 140W TB) (39mm) (138mm) (1626mm) ) MTT-BX 19/16" .6 7/16' 18 1/16' (39W BX) (40mm) (138mm) (469mm) MTT$X 1.9/16' 6 7/16' 24.1/16' (40W BX) (40mm) (138mm) (611mm) MTT-BX ' 19/16, 6 7/16' 36 1/16' }• (12)39W8X) (40mm) (138mm) (916mm) ' MTT-BX 19/16_. 6 7/16' 48 1/18' 1 ((2)40W'BX) (40mm) (138mm) (1221mm) f `;;s • LITE W14 METALUX W-232A-120V-EB81 (2) F32T8/SP30. 4' surface mount fluorescent fixture with acrylic/refractor lens META_LUX' .DESCRIPTION The W Series wraparound features economy and energy officient per - Catalog R TYP° formance. The luminaire's characteristic clean, low profile design is both appealing and practically functional The W Series utillms a clear, Projtx t low brightness, extruded acrylic refractor anda heavy gauge steel end plate with embossed light seal for dependable performance and good Colnm6nts looks - APPLICATION:. • _s `Prepared by Data The efficient and economical W Series Is the perfect wraparound for commercial spaces, schools. dormitories, offices mind retail areas. SPECIFICATION FEATURES A•••Construe 2Ion g---Eloctrlcal• D•••Froma/Shislding _. Housing die formed'eode gauge Batlasts are CBM/ETL Class -P- 100% clear virgin acrylic refrao• prime cold roiled steel Sir full and are positively secured by tor/lons. Sides have Inside fin. lengthribs for strength Ballast mounting bolts. Pressure lock ear prisms and bottom has cover easily removed without Iamphoklers. ULICUL'listed. pyramidalprisms for low tools. Steel and plates with 7/8' Suitable for damp locations. brightness control Lens can be KO and lighent. C •••FIDIsh hinged from either aide in a lift Couplers for continuous row and shift manner. mounting. Multistage, Iron phosphate pro. _ treatment ensures maximum bonding and rust Inhibitor. Lighting grade, baked white enamel finish W220 217 244 O O 187mtn1 J_ - S -VY [218mmi MOUNTING DATA - - - ' teBinp SnndOfi Em6easmmn �-W. O O p 7•VP U2mml Q9. Q ' - � aB•Ittl6mml • I t1b66' [2251-1 QB* 1242am.1 91-r/e' IT�aanattl 7/B' 12Lnln1 K.O. IBI • •. 09T R—I Nolo IW • realtp SlMOalt lmoom+mme 718•p2mty 1A" lamml K.J. Fm Grounding -tJa - 1 ® t-tJ4• -tN- 122mm1 7-1fa• 132mm1 - ' 1 d�B' (83— ' la3mmI � IO11632mm1t3Amml�. ie -t tJm• lax,mml , f 122N•110B9mmI 1 ��61618"1461mm� l �a-p219mm1 21.1512mm1 ia• (Btemml LAMP CONFIGURATIONS LIFT a SHIFT REFRACTOR . 1 W. Gdllb�.4ah�re� oavla. a itMmml OAr4rnm.dyFa.!>tryA6fapy�a) -_Ww 4167mm1 - f ' xalJt- - 1133mm1i- a -y7• ' 12t0mml O.. COOPER LIGHTUllO t •, 240 232 2' SURFACE 2 LAMPS LTS OR HTS 4' OR t' SURFACE 2 LAMS CommorclaP Wrap ENERGY DATA Input Wat m ED 6~ • STD L.M. 217 438) 2401721 232 161) Es I~ a am Lwnps 21744M. 240 (80) 232171) LtonYulre El ieacy Rating LEII. FwJ2 Cat4bg Number. W -212A To-ty Cost of t000dtonant4 3000 "h.. at Am KWH . am •lbl.vp fM.tmyvD�t Gab b U.a 1i WJod eaetbn rw apd6o b�Y6mrt ..�e.n.nb.. ADF020676 (Supersedes ADF991800) �n°"d + � t{f. .t r. � ., - .' ~tet; r ....� - �`•.' la LITE W22 METALUX 5535E Softside L . (2)FU32T8/W35 2'X2' fluorescent surface mount cloud fixture COOPER LIGHTING - METALUX® .DJ Y H Na.l o 1P11. .02sefl11TI ON 65x5-ran fi23s•1'nct' sm I.v 4, MetafaxRaaidentialisleunching a new and improved _ :.-„;�,,, rr-..-w.•. ,. eoRmidelaorvG cloud oared the TuffrPLOYThe row TuHrVulf UbMtes a ch new.lens tenology. called the Dur4liume 2200.Ttis f r"W tedlro1z=11minates broalmge when lain 8-ylro Ians.The Tuff-rindf offeto a (loafing appearance that * mmplimmnaanVdEoorwfthfull, - - - Fawbrightnmoillumination.The DECORATIVE eoft ffoatmg pra le ofthe framefemdifitaerprovdesgin SOFTSIDE appeornnoethat a in urea with SERIES _ aodaVes neeideMial and commercial emAronmenta. With a wide variety of modular Doo o ret$ irs - ” ehapeeand idx%q,thareieaTuff- H or a Lampe ruff focwie forvirtually everV . apace and decoratianpoosibileep .ItE8108NT'!AL SURFACE The famuroe add the righttouch WSSIDE KTIALDECORATIVESFAC tothe beohen, doN living room, �bathroom,alfroeer l •FLUORESCENT 1 - apace. . • Newton* isnoturolly reoistant to odorohrfts ORDERIN6,1.N FOR MATtONM. Catalog. Numberne• -_ Sia•w .Lpnp Kh.- R. 152301, 5236FEEI 1D' a aE 2F3M 2 WDLli 1711x. I7.71M1 55Iff 65I6F1ES1 W.2v VU32TR.2FUI0FI7 ..b. 11DAkj) S43M 546REE1 is, ail WDT19, {R32IH I6na.11i3bO f' 1 . • � r Fro) 0 U/ SEN t [010 ' MDIta O1rooacp•boa••Qe fa nt"e•tu r•sme •ce•om�emr.°1 ao�eeybntrM.�en•.•ar+ueo.m. rnatnd•:.w•re oereen•ce�mruiYaaoNf ealhearl4��T4\•R•W�e•af'ryra� 9~ 3011-brw/aMrftt- aY•�alMbtibn �GQI t. obb/MierOn\ssalleereurOma.talft ACsn•�eL1 ertl•ame•e��raf (Ori7 nam�ar• ••m•maaw bas when ezpoeed to UV typioal d flucersooent Lampe (lero will notyellov4 • Now lona vAll eliminate the tranok handling and' ' 4rllafion damega , ohs"rsotadetio of the delioate Buff lighting ' diffuser. • The newwhito clips eliminate muafing ehadoma while reduoing sharp edges 'and promofing oafs handling. • Energy Swing Rucrosoent lighting. • Soft -floating opal white solo ddfueer • Lft and shift diffuser for ears inotallation • =ant molded endoaps and matte wtite drHuN r Ceoroe"modeb) • Soft illumination • lwailebiewith GnorgVStar qualified aleotronic ballaansm • He auga steelhouaing with�7 CAteenamel finch • Useetm arfour fluorea ant lamps, (not Inch ded) e Suitable fordamp locations • ULXIULlitaed COopEn UANTING LITE Z Owner selected decorativefixture installed by electrical contractor ZFL Owner selected FLUORESCENT decorative fixture installed by electricalz contractor Fixture Schedule Notes ALL MRI 6 lamps are to be 'GE' brand, Constant Color and exact Wattage/beam spread as noted; otherwise Contractor to replace at his/, -her own expense: As well; all other lamp types are to be !GE'* brand, unless • noted otherwise. t. ALL Type 'U' fixtures are linear undercabinet task style fixtures and need to be installed per the following guidelines: a). Fixture(s) to be held to front edge of the upper cabinet and -concealed behind a rhinimum 2" valance. - t b), Fixture to be fed power from side wall if possible; otherwise coordinate ' inconspicuous wire chase with millwork and['or general contractor. c). ,Actual fixture lengths'to be field verified PRIOR to procurement. ALL fixtures requiring remote transformer to be wired with a size that allows no more than a b -volt drop from :transformer to EACH individual- fixture. Transformer locations to `be field determined. BUILDING ENERGY ANALYSIS REPORT PROJECT _ "Colonial" 81-681 Baffin Ave. La Quinta, CA.92253 Project Designer:. Peterson Architecture & Associates 7507 E. McDonald Dr. Scottsdale, AZ 85250 (480) 477-1111 Report Prepared by: Scott DeVoe BREEZE AIR CONDITIONING 75-145 St. Charles Place Palm Desert, CA 92211 (760) -346-0855 tee BREEZE �i ` _ . AIR CONDTIIOMNG ING 1 A' +f BUS OF LA Qv' NTq .: RECEIVED ECEIVD Job Number. DING & SAFE7y � NOV 0 9 2010 FOR CONSTR A p p� ®� �DEP7; Dater .DA re -Z UCTION BY: By 10/14/2010 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC — www.energysoft.com. EnergyPro 5.1 by Energ Sof User Number., 3665 RunCode: 2010-10-14TH:18:57 ID: ... -� �. �' � 1• '` .. PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration 11011412010 Date Project Address 81-681 Baffin Ave. La Quinta California Energy Climate Zone I CA Climate Zone 15 Total Cond. Floor Area 5,407 Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST E) Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for. details. INSULATION Construction Type Area Special Cavity (ft) Features see Part 2 of 5 Status Roof Wood Framed Rafter R-38 4,459 New Wall Wood Framed R-19 5,417 New Slab Unheated Slab -on -Grade None 4,459 Perim = 499' New Demising Wood Framed w/Crawl Space R-13 948 New Door Opaque Door None 40 New Door Opaque Door None 24 New FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status Left (E) 40.0 0.340 0.28 8.0 none Bug Screen New Left (E) 40.0 0.340 0.28 8.0 none Bug Screen New Left (E) 8.0 0.340 0.28 8.0 none Bug Screen New Rear (S) 72.0 0.710 0.60 4.0 none Bug Screen New Right (VV) 4.5 0.340 0.28 2.0 none Bug Screen New Right (M 20.0 0.710 0.60 2.0 none Bug Screen New Right (VV) 20.0 0.340 0.28 2.0 none Bug Screen New Right (VV) 4.5 0.340 0.28 2.0 none Bug Screen New Left (E) 39.0 0.340 0.28 10.0 none Bug Screen New Right (M 40.0 0.340 0.28 2.0 none Bug Screen New Right (M 4.5 0.340 0.28 2.0 none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat . Status 1 Central Furnace 80% AFUE Split Air Conditioner 14.5 SEER Setback New 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New 1 Central Furnace 80% AFUE Split Air Conditioner 14.0 SEER Setback New HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status AC #1 Ducted Ducted Attic, Ceiling Ins, vented 6.0 New AC #2 Ducted Ducted Attic, Ceiling Ins, vented 6.0 New AC #3 Ducted Ducted Attic, Ceiling Ins, vented 6.0 New WATER HEATING Qty. Type Gallons Min. Eff Distribution Status 1 Large Gas 58 0.76 Recirc/Time+Temp New Energ Pro 5.1 by Energ Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 3 of 42 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 11011412010 Project Address 81-681 Baffin Ave. La Quinta California Energy Climate ZoneTotal CA Climate Zone 15 Cond. Floor Area 5,407 Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity (ft) Features see Part 2 of 5) Status FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status Right (W) 4.5 0.340 0.28 2.0 none Bug Screen New Right (W) 27.0 0.340 0.28 2.0 none Bug Screen New Front (N) 4.5 0.340 0.28 10.0 none Bug Screen New Front (N) 5.5 0.340 0.28 none none Bug Screen New Front (N) 5.5 0.340 0.28 none none Bug Screen New Front (N) 6.0 0.340 0.28 none none Bug Screen New Front (N) 3.0 0.340 0.28 none none Bug Screen New Front (N) 3.0 0.340 0.28 none none Bug Screen New Front (N) 13.5 0.340 0.28 2.0 none Bug Screen New Left (E) 6.0 0.340 0.28 2.0 none Bug Screen New Left (E) 6.0 0.340 0.28 2.0 none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New 1 Split Heat Pump 3.2 kW Variable Refrigerant Flo 2.4 kW Setback New HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status AC #4 Ducted Ducted Attic, Ceiling Ins, vented 6.0 New AC #5 Ducted Ducted Attic, Ceiling Ins, vented 6.0 New WATER HEATING Qty. Type Gallons Min. Eff Distribution Status Energ Pro 5.1 by Energ Soft User Number- 3665 RunCode: 2010-10-14T11:18:57 ID: Page 4 of 42 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF-1 R Project Name "Colonial" Building Type ® Single Family ❑ Addition Alone 1. ❑ Multi Family ❑ Existing+ Addition/Alteration Date 1.0/14/2010 Project Address 81-681 Baffin Ave. La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area ; 5,407 Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST 0 Yes ❑ No HERS Measures -- If Yes; A CF-4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features --If Yes, see Part 2 of 5 of this form for details. INSULATION Area Special Construction Type Cavity (ft) Features see Part 2 of 5) Status FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status Left (E) .13.5 0.340 0.28 3.0 none Bug Screen New Left (E) 24.0 0.710 0.60 4.0 none Bug Screen New Left (E) 39.0 0.340 0.28 10.0 none Bug Screen New Left (E) 39.0 0.340 0.28 10.0 none Bug Screen New Left (SE) 6.0 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New Rear (S) 3.8 0.340 0.28 none none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status HVAC DISTRIBUTION Duct Location Heating Cooling Duct Location R-Value Status WATER HEATING Qty. Type Gallons Min. Eff Distribution Status Energ Pro 5.1 by Energ Soft User Number: 3665 Run Code: 2010-10-14711:18:57 /D: Page 5 of 42 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration 1. Date 10/14/2010 Project Address 81-681 Baffin Ave. La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 5,407. Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST El Yes ❑ No HERS Measures -- If Yes, A CF -419 must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity (ft) Features (see Part 2 of 5) Status FENESTRATION U- Orientation Area(ft) Factor Exterior SHGC Overhang Sidefins Shades Status Rear (S) 216.0 0.340 0.28 4.0 none Bug Screen New Rear (S) 72.0 0.340 0.28 10.0 none Bug Screen New Right (lo 6.0 0.340 0.28 none none Bug Screen New Right (lM 3.8 0.340 0.28 none none Bug Screen New Right (lM 3.8 0.340 0.28 none none Bug Screen New Rear (Sim 6.0 0.340 0.28 none none Bug Screen New Front (N) 14.0 0.340 0.28 none none Bug Screen New Front (N) 14.0 0.340 0.28 none none Bug Screen New Front (N) 14.0 0.340 0.28 none none Bug Screen New Front (N) 14.0 0.340 0.28 none none Bug Screen New Left (E) 11.3 0.340 0.28 none none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status WATER HEATING ,Qty. Type Gallons Min. Eff Distribution Status Energ Pro 5.1 by Energ Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 6 of 42 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF-1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 10/14/2010 Project Address 81-681 Baffin Ave. La Quints California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 5,407 Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes ❑ No HERS Measures -- If Yes, A CF-4R must be provided per Part 2 of 5 of this form. 0 Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity (ft) Features (see Part 2 of 5) Status FENESTRATION U- Orientation Area(ft) Factor Exterior SHGC Overhang Sidefins Shades Status Left (E) 11.3 0.340 0.28 none none Bug Screen New Left (E) 10.0 0.340 0.28 none none Bug Screen New Left (E) 10.0 0.340 0.28 none none Bug Screen New Rear (S) 20.0 0.340 0.28 none none Bug Screen New Rear (S) 48.0 0.340 0.28 none none Bug Screen New Rear (S) 20.0 0.340 0.28 none none Bug Screen New Right (M 10.0 0.340 0.28 none none Bug Screen New Front (N) 15.0 0.340 0.28 2.0 none Bug Screen New Front (N) 15.0 0.340 0.28 2.0 none Bug Screen New Left (E) 8.0 0.340 0.28 none none Bug Screen New Left (E). 39.0 0.340 0.28 10.0 none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R-Value Status WATER HEATING Qty. Type Gallons Min. Eff Distribution Status EnergyPro 5.1 by Energ Soft User Number: 3665 RunCode: 2010-10-14711:18:57 /D: Page 7 of 42 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 10/14/2010 Project Address 81-681 Baffin Ave. La Quinta California Energy Climate Zone CA Climate Zone 15 '' Total Cond. Floor Area 5,407. Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST El Yes ❑ No HERS Measures -- If.Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Area Special Construction Type Cavity (ft) Features see Part 2 of 5) Status FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status Right (VV) 4.5 0.340 0.28 2.0 none Bug Screen New HVAC SYSTEMS Ot . Heating Min. Eff . Cooling Min. Eff Thermostat Status HVAC DISTRIBUTION Duct Location Heating Cooling Duct Location R -Value Status WATER HEATING Ot .. Type Gallons Min. Eff . Distribution Status Energ Pro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 8 of 42 PERFORMANCE CERTIFICATE: Residential . (Part 2 of 5) CF-1 R. Project Name "Colonial" Building Type ® Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 10/14/2010 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special `ustification and documentation submitted. The DHW System Rheem RGH PRO-75F is a non-NAECA large storage gas water heater. Verify DHW details. A hot water recirculation systems has been modeled. Verification of type is required. The HVAC System AC #1 must serve only Sleeping Areas. The non-closable area between zones cannot exceed 40 sf and each zone must be controlled with a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA-6 must be met. The HVAC System AC #2 must serve only Sleeping Areas. The non-closable area between zones cannot exceed 40 sf and each zone must be controlled with a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA-6 must be met. The HVAC System AC #4 must serve only Sleeping Areas. The non-closable area between zones cannot exceed 40 sf and each zone must be controlled with a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA-6 must be met. The HVAC System AC #5 must serve only Sleeping Areas. The non-closable area between zones cannot exceed 40 sf and each zone must be controlled with a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA-6 must be met. HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF-4R form for each of the measures listed below for final to be given. The Cooling System Lennox 14ACX/SL280UH110 (4 Ton) includes credit for a 12.0 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System AC #1 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System AC #1 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. The Cooling System Lennox 14ACXISL280UH090 (3 Ton) includes credit for a 12.5 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System AC #2 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System AC #2 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. The Cooling System Lennox 14ACX/SL280UH110 (5 Ton) includes credit for a 12.0 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System AC #3 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System AC #3 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. The Cooling System Lennox 14ACXISL280UH090 (3 Ton) includes credit for a 12.5 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System AC #4 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System AC #4 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 9 of 42 PERFORMANCE. CERTIFICATE: Residential ' (Part 2 of 5) CF-1 R Project Name "Colonial" Building Type ® Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration ; Date 10/14/2010 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. 1 r HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF-4R form for each of the measures listed below for final to be given. The HVAC System AC #5 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Pa a 10 of 42 PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF -1 R Project Name Building Type m Single Family ❑ Addition Alone Date "Colonial." ❑ Multi Family ❑ Existing+Addition/Alteration 1101141201C ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/ft2- r - Space Heating 4.57. 4.89 70.31 Space Cooling 65.75 55.13 10.62 Fans 13.01 15.52 -2.51 Domestic Hot Water 6.35 11.72 -5.37 Pumps 0.00 0.10 -0.10 Totals 89.68 87.35 2.33 Percent Better Than Standard: 2.6% BUILDING COMPLIES - HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (N) 0deg Ext. Walls/Roof Wall Area Area Number of Dwelling Units: 1.00 (N) 1,441 127 Fuel Available at Site: Natural Gas (E) 1,928 350 Raised Floor Area: 0 (S) 1,448 477 Slab on Grade Area: 4,459 (lM 1,772 153 Average Ceiling Height: 12.0 Roof 4,459 0 Fenestration Average U -Factor: 0.38 TOTAL: 1,107 Average SHGC: 0.31 Fenestration/CFA Ratio: 20.5 REMARKS STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 the Administrative Regulations and Part 6. the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and complete. Documentation Author Company BREEZE AIR CONDITIONING Address 75-145 St. Charles Place Name Scott DeVoe 10/14/2010 City/State/ZipCity/State/Zip Palm Desert, CA 92211 Phone (760) 346-0855 Signed Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other'compliance forms and worksheets, with the specifications, and . with any other calculations submitted with this permit application, and recognizes that compliance using duct design, duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Company . Peterson Architecture & Associates Address 7507 E. McDonald Dr. 'Name RJx Son) 6-3 1(/9/1 f] City/State/Zip Scottsdale, AZ 85250 Phone (480) 477-1111 Signed License # Date Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14TH:18:57 ID: Page 11 of 42 CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF-1 R Project Name "Colonial" I Building Type m Single Family ❑ Addition Alone 1 ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/14/2010 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Factor Cavity Exterior Frame Interior Frame Azm Joint Appendix Tilt Status 4 Location/Comments Roof 992 0.029 R-38 270 0 New 4.2.2-A 18 Zone #1 Wall 72 0.074 R-19 0 90 New 4.3.1-A5 Zone #1 Wall 2301 0.074 R-19 90 90 New 4.3.1-A5 Zone #1 Wall 246 0.074 R-19 180 90 New 4.3.1-A5 Zone #1 Wall 521 0.074 R-19 270 90 New 4.3.1-A5 Zone #1 Slab 992 0.730 None 0 180 New 4.4.7-A1 Zone #1 Roof 867 0.029 R-38 270 0 New 4.2.2-A18 Zone #2 Wall 24 0.074 R-19 0 90 New 4.3.1-A5 Zone #2 Wall 153 0.074 R-19 90 90 New 4.3.1-A5 Zone #2 Wall 17 0.074 R-19 180 90 New 4.3.1-A5 Zone #2 Wall 440 0.074 R-19 270 90 New 4.3.1-A5 Zone #2 Slab 867 0.730 None 0 180 New 4.4.7-A1 Zone #2 Demising 948 0.046 R-13 0 90 New 4.4.1-A3 Zone #3 faces Great Roo, Roof 1,137 0.029 1 R-38 270 0 New 4.2.2-A 18 lZone #3 Wall 1 747 0.074 R-19 0 _ 90 New 14.3.1-A5Zone #3 Door 40 1.450 None 0 90 New 4.5.1-A1 Zone #3 FENESTRATION SURFACE DETAILS ID Type Area U-Factor SHGC2 Azm Status Glazing Type Location/Comments 1 Window 40.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(11914) Zone #1 2 Window 40.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(11913) Zone #1 3 Window 8.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(119/B) Zone #1 4 Window 72.0 0.710 Default 0.60 Default 180 New Default Dbl Mtl Tint(1191A) Zone #1 5 Window 4.5 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1201A) Zone #1 6 Window 20.0 0.710 .Default 0.60 1 Default 270 New Default Dbl Mtl Tint(12012) Zone #1 7 Window 20.0 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(12013) Zone #1 8 Window 4.5 0.340 .NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1201B) Zone #1 9 Window 39.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(12911) Zone #2 10 Window 40.0 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(12511) Zone #2 11 Window 4.5 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1261A) Zone #2 12 Window 4.5 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1271A) Zone #2 13 Window 27.0 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1291A) Zone #2 14 Window 4.5 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(1331A) Zone #3 15 Window 5.5 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(117/A) Zone #3 16 Window 5.5 0.340 NFRC 0.28 NFRC 0 New I Loewen Mticlad Low=E(117/B) I Zone #3 (1) 1-1-Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Ove hang Left Fin Right Fin Len H t LExt RExt Dist Len H t Dist Len H t 1 Bug Screen 0.76 8.0 5.0 8.0 0.1 8.0 8.0 2 Bug Screen 0.76 8.0 5.0 8.0 0.1 8.0 8.0 3 Bug Screen 0.76 4.0 2.0 8.0 0.1 8.0 8.0 4 Bug Screen 0.76 6.0 12.0 4.0 0.1 4.0 4.0 5 Bug Screen 0.76 3.01 1.6 2.01 0.1 2.0 2.0 6 Bug Screen 0.76. 8.0 2.6 2.0 0.1 2.0 2.0 7 Bug Screen 0.76' 8.0. 2.6 2.0 0.1 2.0 2.0 8 Bug Screen 0.76 3.0 1.6 2.0 0.1 2.0 . 2.0 9 Bug Screen 0.76 6.6 6.0 10.0 0.1 10.0 10.0 10 Bug Screen 0.76 8.0 5.0 2.0 0.1 2.0 2.0 11 Bug Screen 0.76 3.0 1.6 2.0 0.1 2.0 2.0 12 Bug Screen 0.76. 3.0 1.6 2.0 0.1 2.0 2.0 13 Bug Screen 0.76 4.5 . 6.0 2.0 0.1 2.0 2.0 14 Bug Screen 0.76 3.0 1.6 10.0 0.1 10.0 10.0 15 Bug Screen 0.76 16 Bug Screen 0.76 Ener Pro 5.1 by Ener Soft User Number. 3665 RunCode: 2010-10-14711:18:57 ID: Pae 12 of 42 CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name "Colonial" Building Type IZI Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/14/2010 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Factor `Cavit Exterior Frame Interior Frame Azm Joint Appendix Tilt Status 4 Location/Comments Wall 647 0.074 'R-19 90 90 New 4.3.1-A5 Zone #3 Wall . 8 0.074 R-19 135 90 New 4.3.1-A5 Zone #3 Wall 493 0.074,R-19 180 90 New 4.3.1-A5 Zone #3 Wall 178 0.074 R-19 270 90 New 4.3.1-A5 Zone #3 Wall 8 0.074 R-19 225 90 New 4.3.1-A5 Zone #3 Slab 2,085 0.730 None 0 180 New 4.4.7-A1 Zone #3 Roof 948 0.029 R-38 270 0 New 4.2.2-A18 Zone #4 Wall 166 0.074 R-19 0 90 New 4.3.1-A5 Zone #4 Wall 347 0.074 R-19 90 90 New 4.3.1-A5 Zone #4 Wall 152f 0.074 R-19 180 90 New 4.3.1-A5 Zone #4 Wall 2121 0.074 R-19 1 270 90 New 4.3.1-A5 Zone #4 Door 241 1.450 None 270 90 New 4.5.1-A1 Zone #4 Roof 515 0.029 R-38 10 .0 New 4.2.2-A 18 Zone #5 Wall 265 0.074 R-19 01 90 New 4.3.1-A5 Zone #5 Wall 193 0.074 R-19 901 90 1 New 4.3.1-A5 Zone #5 Wall 55 0.074 R-19 1801 90 1 New I 4.3.1-A5 JZone #5 FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGC Azm Status Glazing Type Location/Comments 17 Window 6.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(1031B) Zone #3 18 Window 3.0' 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low -E(11711) Zone #3 19 Window 3.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(117/H Zone #3 20 Window 13.5 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(1121A) Zone #3 21 lWindow 6.0 0.340 NFRC 0.28 NFRC 901 New Loewen Mticlad Low-E(114/B) Zone #3 22 lWindow -6.01 0.340 NFRC 1 0.28 NFRC 90 New Loewen Mticlad Low-E(114/A) Zone #3 23 Window 13.51 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(112/B) Zone #3 24 Window 24.0 0.710 Default 0.60 Default 90 New Default Dbl Mtl Tint(110/1) Zone #3 25 Window 39.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low -E(13212) Zone #3 26 Window 39.0 0.340 NFRC 0.28 1 NFRC 90 New Loewen Mticlad Low -E(13211) Zone #3 27 Window 6.0 0.340 NFRC 0.28 NFRC 135 New Loewen Mticlad Low-E(1031A) Zone #3 28 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(117/C) Zone #3 29 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(117/D) Zone #3 30 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(117/E) Zone #3 31 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(116/A) Zone #3 32 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(116/B) I Zone #3 (1) Ll -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-13 = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t I Wd Ove hang Left Fin Right Fin Len I Hat LExt RExt Dist I Len H t Dist Len H t 17 Bug Screen 0.76 18 Bug Screen 0.76 19 Bug Screen 0.76 20 lBug Screen 0.76 4.6 3.0 2.0 0.1 2.0 2.0 21 Bug Screen 0.76 4.0 1.61 2.0 0.11 2.0 2.0 22 Bug Screen 0.76: 4.0 1.6 2.0 0.1 2.0 2.0 23 Bug Screen 0.76 4.6 3.0 3.0 0.1 3.0 3.0 24 Bug Screen 0.76. 8.0 3.0 4.0 0.1 4.0 4.0 25 Bug Screen 0.76 6.6 6.0 10.0 0.1 10.0 10.0 26 Bug Screen 0.76. 6.6 6.0 10.0 0.1 10.0 10.0 27 Bug Screen 0.76 28 Bug Screen 0.76 29 Bug Screen 0.76 30 Bug Screen 0.76 31 Bug Screen 0.76 32 Bug Screen 0.76 Ener Pro 5.1 by Ener Soft User Number. 3665 RunCode: 2010-10-14TH:18:57 ID: Pae 13 of42 CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/14/201 OPAQUE SURFACE DETAILS Surface Type Area U Factor Insulation Joint Appendix. Cavity, Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Wall 243 0.074 R-19 270 90 New 4.3.1-A5 Zone #5 Slab 515 0.730 None 0 180 New 4.4.7-A1 Zone #5 FENESTRATION SURFACE DETAILS ID Type Area LI -Factor' SHGC Azm Status Glazing Type Location/Comments 33 Window 3.8 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(116/C) Zone #3 34 Window 216.0 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low -E(1 17/1) Zone #3 35 Window 72.0 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low -E 114/1 Zone #3 36 Window 6.0 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1031D) Zone #3 37 Window 3.8 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(117/F) Zone #3 38 Window 3.8 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(117/G) Zone #3 39 Window 6.0 0.340 NFRC 0.28 NFRC 225 New Loewen Mticlad Low-E(1031C) Zone #3 40 Window 14.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low -E(20318) Zone #4 41 Window 14.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(2031C) Zone #4 42 Window 14.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(2031D) Zone #4 43 Window 14:0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(2031E) Zone #4 44 lWindow 11.3 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(2011B) Zone #4 45 Window 11.3 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(2011A) Zone #4 46 Window 10.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(2021A) Zone #4 47 Window 1 10.0, 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(2031A) Zone #4 48 Window 1 20.01 0.340 1 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(2011C) Zone #4 (1) Ll -Factor Type: 2 SHGC Type: 116-A = Default Table from Standards, NFRC = Labeled Value 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Overhanq Left Fin Ri ht Fin Len H t LExt RExt Dist Len H t Dist Len H t 33 Bug Screen 0.76 34 Bug Screen 0.76 9.0 24.0 4.0 0.1 4.0 4.0 35 Bug Screen 0.76 9.0 8.0 10.0 0.1 10.0 10.0 36 Bug Screen 0.76 37 Bug Screen 0.76 38 Bug Screen 0.76 39 Bug Screen 0.76 40 Bug Screen 0.76 41 Bug Screen 0.76 42 Bug Screen 0.76 43 Bug Screen 0.76 44 Bug Screen 0.76 45 Bug Screen 0.76 46 Bug Screen 0.76 47 Bug Screen 0.76 48 Bug Screen 0.76. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Pae 14 of 42 CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name "Colonial" Building Type m Single Family ❑ Addition Alone 1 ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/14/2010 OPAQUE SURFACE DETAILS . Surface U- Type Area Factor Insulation Joint Appendix Cavit Exterior Frame Interior Frame ' Azm Tilt Status 4 Location/Comments FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGC2 Azm Status Glazing Type Location/Comments 49 Window 48.0 0.340 NFRC 0.28 1 NFRC 180 New Loewen Mticlad Low -E(20112) Zone #4 50 Window 20.0 0.340 NFRC 0.28 NFRC 180 New Loewen Mticlad Low-E(2011D) Zone #4 51 Window 10.0 0.340 NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(2031F) Zone #4 52 Window 15.0 0.340 NFRC 0.28 NFRC 0 New Loewen Mticlad Low-E(1341A) Zone #5 53 Window 15.0 0.340 NFRC 0.28 'NFRC 0 New Loewen Mticlad Low-E(1341B) Zone #5 54 Window 8.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low-E(1371A) Zone #5 55 Window 39.0 0.340 NFRC 0.28 NFRC 90 New Loewen Mticlad Low -E(13411) Zone #5 56 Window 4.5 0.340 .NFRC 0.28 NFRC 270 New Loewen Mticlad Low-E(1351A) Zone #5 (1) Ll -Factor Type: 2 SHGC Type: 116-A = Default Table from Standards, NFRC = Labeled Value 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type Window SHGC H t Wd Overhang Left Fin Right Fin Len H t I LExt RExt Dist Len H t Dist Len H t 49 Bug Screen 0.76 50 Bug Screen 0.76 51 Bug Screen 0.76 52 IBug Screen 0.76 5.0 3.01 2.0 0.1 2.0 2.0 53 Bug Screen 0.76 5.0 3.0 2.0 0.1 2.0 2.0 54 Bug Screen 0.76 55 Bug Screen 0.76. 6.6 6.0 10.0 0.1 10.0 10.0 56 Bug Screen 0.76 ; 3.0 1.6 2.0 0.1 2.0 . 2.0 Ener Pro 5.1 by Ener Soft User Number., 3665 RunCode: 2010-10-14711:18:57 ID: Pae 15 of 42 CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5) CF -1 R Project Name "Colonial" Building Type ❑ Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 11011412016 BUILDING ZONE INFORMATION System Name Zone Name Floor Area ft New Existinq Altered Removed Volume Year Built AC #1 Master Suite 992 11,904 AC #2 Beds #1/#2 867 10,404 AC #3 Great Room/Kitchen 2,085 25,020 AC #4 Upstairs Casita 948 11,376 AC #5 Guest Casita 515 6,180 Totals 5,4071 01 01 0 HVAC SYSTEMS System Name Ot . Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status AC #1 1 Central Furnace 80% AFUE Split Air Conditioner 14.5 SEER Setback New AC #2 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New AC #3 1 Central Furnace 80% AFUE Split Air Conditioner 14.0 SEER Setback New AC #4 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New AC #5 1 Split Heat Pump 3.2 kW Variable Refrigerant Flov 2.4 kW Setback New HVAC DISTRIBUTION System Name Heating Duct Coolin Duct Location R -Value Ducts Tested? Status AC #1 Ducted Ducted Attic, Ceiling Ins, vented 6.0 m New AC #2 Ducted Ducted Attic, Ceiling Ins, vented 6.0 El New AC #3 Ducted Ducted Attic, Ceiling Ins, vented 6.0 E) New AC #4 Ducted Ducted Attic, Ceiling Ins, vented 6.0 El INew AC #5 1 Ducted I Ducted JAttic, Ceiling Ins, vented 1 6.01 El JNeW WATER HEATING SYSTEMS S stem Name at . Type Distribution Rated Input Btuh Tank Cap. al Energy Factor or RE Standby Loss or Pilot Ext. Tank Insul. R- Value Status Rheem RGH PRO -75F 1 Large Gas RecirclTime+Temp 75,100 58 0.76 3.50% 0.0 New MULTI -FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control E. m w Hot Water Piping Length ft c o a Q — System Name Pipe Len th Pipe Diameter Insul. Thick. Ot T 7PIenumOutside Buried ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ Ener Pro 5.1 by Ener Soft User Number. 3665 RunCode: 2010-10-14711:18:57 ID: Pae 16 of 42 MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R Project NameDate "Colonial" 1,1011412010 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF - 1 R -ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary: Submit all applicable sections of the MF -1 R Form with plans. Building Envelope Measures: 116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form. §118(i): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(i) when the installation of a Cool Roof is specified on the CF -1 R Form. *§150(a): Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor. 150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value. *§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent 1.1 -factor. *§150(d): Minimum R-13 insulation in raised wood -frame floor orequivalent U -factor. §150(f): Air retarding wrap is tested, labeled, and installed accordind to ASTM El677-95 2000 when specified on the CF -1 R Form. 150 : Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater than 2.0 erm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 e 1 A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §150(e)l B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5. §115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. 150(h): Heating and/orbooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA. 150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c). §1500)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. §1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of recirculating sections of hot water pipes are insulated per Standards Table 150-B. §1500)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. §1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table 123-A. 1500)3A: Insulation is protected from damage, including that due to sunlight, moisture, .equipment maintenance, and wind. §1500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in conditioned space. 150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation. EnergyPro 5.1 by EnergySoft User Number. 3665 RunCode: 2010-10-14T11:18:57 ID:. Page 17 of 42 MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date "Colonial" 10/14/2010 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums. are insulated to a minimum installed level of R- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. 150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. §150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. 150 m 10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and Spa Heating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating ora pilot light. §114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. §150( ): Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of § 150 Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2. 150(k)3: The wattage of permanently installed luminaires shall be determined as specified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Wafts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. 150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k). 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. §150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. EnergyPro 5.1 by EnergySoft User Number. 3665 RunCode: 2010-10-14T11:18:57 ID: Page 18 of 42 } MANDATORY MEASURES SUMMARY: Residential (Page 3 of, 3 MF -1 R Project Name Date "Colonial" - 10/14/2010 §150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a manual -on occupancy sensor. y §150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual - on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site is not required to comply with §150 k 11. §150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between 'the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptions to §150(k)13 may be controlled by a temporary override switch which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not be hi h efficacy luminaires. • §150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no, ' more than five watts of power as determined according to § 1 30 d . '§150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130,132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130,131, 134, and 146. §150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119. EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 19 of 42 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name "Colonial" Date 10/14/2010 System Name AC #1 Floor Area 992 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL COOLING PEAK CFM Sensible Total Room Loads 778. 13,710 Return Vented Lighting 0 Return Air Ducts 759 Return Fan 0 Ventilation 60 2,505 Supply Fan 0 Supply Air Ducts 759 TOTAL SYSTEM LOAD 1 17,733 COIL HTG. Latent CFM 1,701 766: 1,148 60, 2,848 PEAK Heating System Sensible Output per System 88,000 19,967 Total Output Btuh 88,000 Output Btuh/s ft 88.7 886 Cooling System 0 Output per System 47,500 3,388 Total Output (Btuh) 47,500 0 Total Output Tons 4.0 886 Total Output Btuh/s ft 47.9 Total Output s ft/Ton 250.6 25,127 Air System CFM per System 1,600 HVAC EQUIPMENT SELECTION Airflow cfm 1,600 Lennox 14ACX/SL280UH110 (4•Ton) 36,253 3,819 88,000 88,000 Jan 1 AM Airflow cfm/s ft 1.61 Airflow cfm/Ton) 404.2 Outside Air % 3.7 % Total Adjusted System Output 36,253 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 3,819 Aug 3 PM Outside Air (cfm/s ft 0.06 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 26 OF 77 OF Outside Air 60 cfm Supply Fan 1,600 cfm 79 OF 77 OF 105 OF 14 Heating Coil 104 OF ROOM 80 OF COOLING SYSTEM PSYCHROMETICS (Airstream Temperatures at Time of Cooling Peak) 112 / 78 OF 74 162 Outside Air 60 cfm 72161 OF OF 74 / 62 OF 55 / 54 OF • 0 c c c Supply Fan 1,600 cfm 52.9% ri 55Coil 55 / 54 OF I ROOM 72/61 OF EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 20 of 42 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name "Colonial" Date 10/14/2010 System Name AC #2 Floor Area 867 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL COOLING PEAK CFM_ Sensible Total Room Loads 497 ` 8,786 Return Vented Lighting 0 Return Air Ducts 486 Return Fan 0 Ventilation. 52 2,193 Supply Fan 0 Supply Air Ducts 486 TOTAL SYSTEM LOAD 11,952 COIL HTG. Latent CFM 1,712 527. 983 52 2,695 PEAK Heating System Sensible Output per System 70,400 13,758 Total Output Btuh 70,400 Output Btuh/s ft 81.2 611 Cooling System 0 Output per System 34,600 2,963 Total Output Btuh) 34,600 0 Total Output Tons 2.9 611 Total Output Btuh/s ft 39.9 Total Output s ft/Ton 300.7 17,943 Air System CFM p er System 1,200 HVAC EQUIPMENT SELECTION Airflow cfm 1,200 Lennox 14ACX/SL280UH090 (3 Ton) 26,135 3,155 70,400 70,400 Jan 1 AM Airflow cfm/s ft 1.38 Airflow cfm/Ton 416.2 Outside Air % 4.3 % Total Adjusted System Output 26,135 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 3,155 Aug 3 PM Outside Air cfm/s ft 0.06 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 26 OF 77 OF Outside Air 52 cfm Supply Fan 1,200 cfm 80 OF 77 OF 105 OF A Heating Coil ------------ 105 OF ROOM 80 OF I COOLING SYSTEM PSYCHROMETICS (Airstream Temperatures at Time of Cooling Peak) 112 / 78 OF 74 / 62 OF 74 J 62 OF 55 154 OF • c c Outside Air Arc 52 cfm Supply Fan Cooling Coil 1,200 cfm 53.3% 72/61 °F 55 / 54 OF. ROOM 72/61 OF EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 /D: Page 21 of 42 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name "Colonial" Date 10/14/2010 System Name AC #3 Floor Area 2,085 ENGINEERING CHECKS SYSTEM LOAD Number of S stems 1 COIL COOLING PEAK CFM Sensible Total Room Loads , 1,481 25,742 Return Vented Lighting 0 Return Air Ducts 1,425 Return fan 0 Ventilation 125 5,236 Supply Fan 0 Supply Air Ducts 1,425 TOTAL SYSTEM LOAD 1 33,828 COIL HTG. Latent CFM 3,554 1,585 2,336 2 125 5,886 PEAK Heating System Sensible Output per System 88,000 40,728 Total Output (Btuh) 88,000 Output Btuh/s ft 42.2 1,808 Cooling System 0 Output per System 56,500 7,07 Total Outp ut (Btuh) 56,500 0 Total Output (Tons) 4.7 1,808 Total Output Btuh/sgft 27.1 Total output s ft/Ton 442:8 F 51,420 Air System CFM per System 2,000 HVAC EQUIPMENT SELECTION Airflow cfm 2,000 Lennox 14ACX/SL280UH110 (5 Ton) 34,922 13,319 88,000 88,000 Jan 1 AM Airflow cfm/s ff 0.96 Airflow cfm/Ton 424.8 Outside Air % 6.3 % Total Adjusted System Output 34,922 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 13,319 Aug 3 PM Outside Air (cfm/s ft) 0.06 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 26 OF 76 OF Ctb Outside Air 125 cfm Supply Fan 2,000 cfm 79 OF 76 OF 105 OF Heating Coil 104 OF ROOM 80 OF COOLING SYSTEM PSYCHROMETICS (Airstream Temperatures at Time of Cooling Peak) 112/78°F 75/62°F 75/63°F 55/54°F Outside Air Arc 125 cfm Supply Fan Cooling Coil 2,000 cfm 53.7% 73/61 OF 56 / 54 OF ROOM 72/61 OF. EnergyPro 5.1 by EnergySoft User Number., 3665 RunCode: 2010-10-14T11:18:57 ID: Page 22 of 42 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name "Colonial" Date 10/14/2010 System Name AC #4 Floor Area 948 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL COOLING PEAK CFM Sensible Total Room Loads 676 11,858 Return Vented Lighting 0 Return Air Ducts 656 Return Fan 0 Ventilation 57 2,390 Supply Fan 0 Supply Air Ducts 656 TOTAL SYSTEM LOAD 1 15,561 COIL HTG. Latent CFM 1,634. 563 1,081 57 2,715 • PEAK Heating System Sensible Output perSystem 70,400 14,671 Total Output Btuh 70,400 Output(Bt uh/s ft 74.3 651 Cooling System 0 Output perSystem 34,600 3,238 Total Output Btuh 34,600 0 Total Output Tons 2.9 651 Total Output Btuh/s ft 36.5 Total Output s ft/Ton 328.8 19,211 Air System CFM perSystem 1,200 HVAC EQUIPMENT SELECTION Airflow cfm 1,200 Lennox 14ACX/SL280UH090 (3 Ton) 26,355 2,976 70,400 70,400 Jan 1 AM Airflow cfm/s ft 1.27 Airflow cfm/Ton) 416.2 Outside Air % 4.7% Total Adjusted System Output 26,355 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK I 2,976. Aug 3 PM Outside Air .(cfm/s ft) 0.06 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 26 OF 77 OF Outside Air O 57 cfm Supply Fan 1,200 cfm 79 °F 77 OF 105 OF Heating Coil 104 OF ROOM -y 80 OF COOLING SYSTEM PSYCHROMETICS (Airstream Temperatures at Time of Cooling Peak) 112/78°F 74/62°F 74/62°F 55/54°F c c Outside AirAr 57 cfm Supply Fan Cooling Coil 1,200 cfm 53.2% 73/61°F 56 / 54 OF ( ROOM 72/61°F EnergyPro 5.1 by EnergySoft User Number. • 3665 RunCode: 2010-10-14711:18:57 10: Page 23 of 42 HVAC SYSTEM HEATING AND,COOLING LOADS SUMMARY Project Name "Colonial" Date 10/14/2010 System Name AC #5 Floor Area 515 ENGINEERING CHECKS SYSTEM LOAD Number of S stems 1 COIL COOLING PEAK CFM Sensible Total Room Loads 7,063 Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD 1 7,063 COIL HTG. Latent CFM c PEAK Heating System Sensible Output per System 34,000 12,491 Total Output Btuh 34,000 Output(Btu h/s ft 66.0 Cooling System Output per System 30,000 Total Output Btuh . 30,000 Total Output Tons 2.5 Total Output ut (Btuh/s ft) 58.3 Total Output s ft/Ton 206.0 12,491 Air System CFM per System 0 HVAC EQUIPMENT SELECTION Airflow cfm 0 Mitsubishi PUMY 25,796 0 30,677 Airflow cfm/s ft 0.00 Airflow cfmfTon 0.0 Outside Air % 0.0 % Total Adjusted System Output 25,796. (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 0 Aug3 PM 30,677 1- I Jan 1 AM Outside Air cfm/s ft 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Tem eratures at Time of Heating Peak) 26 OF Outside Air 0 cfm 79 OF 72 OF 105 OF Heating Coil 104 OF ROOM 80 OF COOLING SYSTEM PSYCHROMETICS (Airstream Temperatures at Time of Cooling Peak) 112/78°F Outside Air. A 0 cfm 73 / 60 OF 78/63°F 52/51°F , c Cooling Coil 50.2% 53l 51 OF ROOM 72 16d OF EnergyPro 5.1 by EnergySoft. User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 24 of 42 ROOM LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 System Name Floor Area AC #1 992 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFM Sensible 1. Latent CFMSensible Latent CFM I Sensible Zone #1 1 Master Suite 1 1 7781 13,7101 1, 701 7781 13,7101 1, 701 766 19, 967 PAGE TOTAL TOTAL' I ' Total includes ventilation load for zonal 778 13, 710 1,7011 766 19,9167 778 13,710 1,701 766 19,967 EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 25 of 42 1 ROOM LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 System Name Floor Area AC #2 867 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK I COIL HTG. PEAK Zone Name Room Name Mult. CFM I Sensible I Latent CFM I Sensible Latent CFM Sensible Zone #2 Beds #11#2 1 1 1 4971 8,7861 1,712 4971 8,786: 1,7121 5271 13,758 PAGE TOTAL TOTAL* I * Total includes ventilation 497 81 786 1,7121 527 13,758 497 8,7861 1,7121 527 13, 758 EnergyPro 5.1 by EnemySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 26 of 42 ROOM LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 System Name Floor Area AC #3 2,085 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFM Sensible Latent CFM Sensible . Latent CFM Sensible. Zone #3 Great Room/Kitchen 1 1,481 25,742 3,554 1,481 25,742 3,554 1,585 40,728 0 PAGE TOTAL TOTAL* 1,481 25,742 3,554 1,585' 40,728 1,481 25,742 3,554 1,585, 40,728 * Total includes ventilation load for zonal systems. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 /D: Page 27 of 42 ROOM LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 System Name Floor Area AC #4 948 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK I COIL HTG. PEAK Zone Name Room Name Mult. CFnsible Latent CFM Sensible Latent CFM Sensible Zone #4 Upstairs Casita 1 676+11,8581 . 1, 634 676 11,8581 1,6341 5631 14, 671 PAGE TOTAL TOTAL* 676 11,858 1,634 563 14,671 676 11,858 1,634 563 14,671 * Total includes ventilation load for zonal systems. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Pa a 28 of 42 ROOM LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 System Name Floor Area AC #5 515 ROOM LOAD SUMMARY ' ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFM Sensible Latent CFM Sensible Latent CFM Sensible Zone #5 Guest Casita 1 287 5,747 979 287: 5,747 979 426 10,715 PAGE TOTAL TOTAL ' Total includes ventilation load for zonal systems. Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14T11:18:57 287 5,747 979 426 10,715 287 5,747-1979 426 10,715 ROOM HEATING PEAK LOADS Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Master Suite Time of Peak Jan 1 AM Floor Area 992.0 ft2 Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 80 OF Conduction Area U -Value AT OF Btu/hr R-38 Roof- Icynene 992.0 X 0.0290 X 54 = 1,553 R-19 Wall 1,069.0 X 0.0740 ! X 54 = 4,272 Loewen Mticlad Low -E(11914) 40.0 X 0.34001 X 54 = 734 Loewen Mticlad Low -E(11913) 40.0 X 0.3400 X 54 = 734 Loewen Mticlad Low-E(1191B) 8.0 X 0.3400: X 54 = 147 Default Dbl Mtl Tint(1191A) 72.0 X 0.7100 X 54 = 2,760 Loewen Mticlad Low-E(1201A) 4.5 X - 0.3400 X 54 = 83 Default Dbl Mtl Tint(12012) 20.0. X 0.7100 X 54 = 767 Loewen Mticlad Low -E(12013) 20.0 X 0.3400 X 54 = 367 Loewen Mticlad Low-E(1201B) 4.5 X 0.3400 X 54 = 83 Slab -On -Grade perim = 103.5 X 0.7300 X 54 = 4,080 X X = X X _ X X = X X X X - X X = X X = X X = X X _ X X - X X = X X - X X = X X = X X _ X X = X X _ X X = X X; _ X X = Items shown with an asterisk (') denote conduction through an interior surface to another room Page Total 15,581 Infiltration:[ 1.00 X 1.064 X 992: X 12.00 X 0.385 /60] X 54 = 4,386 Schedule Air Sensible Area Ceiling Height ACH AT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 19,967 EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 30 of 42 ROOM HEATING PEAK LOADS Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Beds #1/#2 Time of Peak Jan 1 AM Floor Area 867.0 ft2 Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 80 OF Conduction . Area U-Value AT °F Btu/hr R-38 Roof - Icynene 867.0 X 0.0290 X 54 = 1,358 R-19 Wall 634.0 X 0.0740 X 54 c 2,533 Loewen Mticlad Low-E(12911) 39.0 X 0.3400: X 54 = 716 Loewen Mticlad Low-E(12511) 40.0 X 0.3400 X 54 = 734 Loewen Mticlad Low-E(1261A) 4.5 X 0.3400: X 54 _ 83 Loewen Mticlad Low-E(1271A) 4.5 X 0.3400 ' X 54 _ 83 Loewen Mticlad Low-E(1291A) 27.0 X x3400 X 54 _ 496 Slab-On-Grade perm = 99.5 X 0.7300 ` X 54 0 3,922 X X = X X = X X _ X X = X X - X X = X X = X X - X X - X X = X X = X X _ X X X X = X X = X X _ X X = X X _ X X - X X = X' X = X X = X X _ Items shown with an asterisk (') denote conduction through an interior surface to another room Page Total 9,925 Infiltration:[ x 1.064 X 867 X 12.001, X 0.385 : / 60 ] X' 54 Schedule Air Sensible Area Ceiling Height ACH AT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 13,758 EnergyPro 5.1 by'EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 31 of 42 ROOM HEATING PEAK LOADS Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Great Room/Kitchen Time of Peak Jan 1 AM Floor Area 2,085.0 ftz Outdoor Dry Bulb Temperature 26 OF Indoor Dr Bulb Tem erature 80 OF L r - Conduction Area *R-0 Floor (F.0.2x .16) R-38 Roof - Icynene R-19 Wall Loewen Mticlad Low-E(1331A) Loewen Mticlad Low-E(117/A) Loewen Mticlad Low -E(11718) Loewen Mticlad Low-E(1031B) Loewen Mticlad Low -E(1 17/1) Loewen Mticlad Low-E(117/H) Loewen Mticlad Low-E(112/A) SldWdDr (103/1) Loewen Mticlad Low-E(114/B) Loewen Mticlad Low-E(114/A) Loewen Mticlad Low-E(112/B) Default Dbl Mtl Tint(110/1) Loewen Mticlad Low -E(13212) Loewen Mticlad Low -E(13211) Loewen Mticlad Low-E(1031A) Loewen Mticlad Low-E(117/C) Loewen Mticlad Low-E(117/D) Loewen Mticlad Low-E(117/E) Loewen Mticlad Low-E(116/A) Loewen Mticlad Low-E(116/B) Loewen Mticlad Low-E(116/C) Loewen Mticlad Low -E(1 17/1) Loewen Mticlad Low -E(11411) Loewen Mticlad Low-E(1031D) Loewen Mticlad Low-E(117/F) Loewen Mt/clad Low-E(117/G) . Loewen Mticlad Low-E(103/C) Slab -On -Grade Items shown with an asterisk (') denote conduction through an interior surface to another room Infiltration:[ 1.00 x 1.064 x 2,085 x 12.00 x C Schedule Air Sensible Area Ceiling Height AC Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 948.0 1,137.0 2,080.3 4.5 5.5 5.5 6.0 3.0 3.0 13.5 40.0 6.0 6.0 13.5 24.0 39.0 39.0 6.0 3.8 3.8 3.8 3.8 3.8 3.8 216.0 72.0 6.0 3.8 3.8 6.0 Perim = 216.5 U -Value X 0.0460 x x x x 0.0290 0.0740 0.3400 0.3400 x X X x x x x 0.3400 0.3400 0.3400 0.3400 0.3400 1.4500 0.3400 x x 0.3400 0.3400 x X x 0.7100 0.3400 0.3400 x 0.3400 x 0.3400 x 0.3400 x 0.3400 x 0.3400 X x x x X 0.3400 0.3400 0.3400 0.3400 '0.3400 x X x x 0.3400 0.3400 0.3400 0.7300 AT °F A U = X 54 x 54 = x 54 x 54 = x 54 = x 54 X 54 c x 54 = x 54 = x 54 x 54 = x 54 X 54 . x 54 x 54 = x 54 = x 54 = x 54 x 54 x 54 x . 54 = X = x 54 = x 54 x 54 x 54 = x 54 = x 54 x 54 x 54 Page Total 185 / 60 x 54 = -1 AT Btu/hr 0 1,781 8,313 83 101 101 110 55 55 248 3,132 110 110 248 920 716 716 110 70 70 70 70 70 70 3,966 1,322 110 70 70 110 8,534 31,509 1 9,2191 7281 ROOM HEATING PEAK LOADS Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Upstairs Casita Time of Peak Jan 1 AM Floor Area 948.0 ft2 Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 80 OF Conduction Area U -Value AT of Btu/hr R-38 Roof- Icynene 948.0 .X . 0.0290 X 54 = 1,485 R-19 Wall 877.4 X 0.0740 X 54 = 3,506 Loewen Mticlad Low-E(2031B) 14.0 X 0.3400 X 54 = 257 Loewen Mticlad Low-E(2031C) 14.0 X 0.3400 X 54 = 257 Loewen Mticlad Low-E(2031D) 14.0 X ' 0.3400 X 54 = 257 Loewen Mticlad Low-E(2031E) 14.0 X 0.3400 X : 54 = 257 Loewen Mticlad Low-E(2011B) 11.3 X 0.3400 X 54 = 207 Loewen Mticlad Low-E(2011A) 11.3 X 0.3400 X 54 = 207 Loewen Mticlad Low-E(2021A) 10.0 X 0.3400 X 54 = 184 Loewen Mticlad Low-E(2031A) 10.0 X 0.3400 X 54 = 184 Loewen Mticlad Low-E(2011C) 20.0 X . 0.3400 X 54 = 367 Loewen Mticlad Low -E(20112) 48.0 X 0.3400 X 54 = 881 Loewen Mticlad Low-E(2011D) 20.0 X 0.3400. X 54 = 367 SIdWdDr (204/1) 24.0 X 1.4500 X 54 = 1,879 Loewen Mticlad Low-E(2031F) 10.0 X 0.3400 X 54 = 184 X X = X X = X X = X X _ X X = X X = X X = X X = X X = X X - X X = X X = X X = X X _ X X - X X = Items shown with an asterisk (') denote conduction through an interior surface to another room Page Total 10,479 Infiltration:[ 1.00 X 1.064 X 948 X 12.00 X 0.385 /60] X 54 = 4,192 Schedule Air Sensible Area Ceiling Height ACH AT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 14,671 EnergyPro 5.1 by EnergySoft User Number. 3665 RunCode: 2010-10-14711:18:57 ID: Page 33 of 42 ROOM HEATING PEAK LOADS Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Guest Casita Time of Peak Jan 1 AM Floor Area 515.0 ft' Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 80 °F Conduction Area U-Value AT *F Btu/hr R-38 Roof- Icynene 515.0 ,X 0.0290 X. 54 = 806 R-19 Wall 756.0 X 0.0740 X 54 = 3,021 Loewen MUclad Low-E(1341A) 15.0 X 0.3400 . X 54 = 275 Loewen Mticlad Low-E(1341B) 15.0 X 0.3400 X 54 = 275 Loewen Mticlad Low-E(1371A) 8.0 X 0.3400 X 54 = 147 Loewen Mticlad Low-E(13411) 39.0 X 0.3400 X 54 = 716 Loewen Mticlad Low-E(1351A) 4.5 X 0.3400 X 54 = 83 Slab-On-Grade Perim = 79.0 X 0.7300 X 54 = 3,114 X X = X X = X. X = X X - X, X = X X = X X = X X = X X = X X - X X - X X = X X = X X = X X = X X = X X - X X = X X X. X = X X = X X _ X X - Items shown with an asterisk (') denote conduction through an interior surface to another room Page Total 8,438 'Infiltration:[ 1.00 X 1.064. X 515 X . 12.00 X 0.385 /60] X Schedule Air Sensible Area Ceiling Height ACH AT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 10,715 EnergyPro 5.1 by EnergySoft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 34 of 42 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Master Suite Outdoor Dry Bulb Temperature 112 OF Floor Area 992.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr R-38 Roof- Icynene (VV) 992.0 X 0.0290 X 56.0 = 1,611 R-19 Wall (N) 72.0 X 0.0740 • X 23.0 = 123 R-19 Wall (E) 230.0 X 0.0740 X 33.0 = 562 R-19 Wall (S) 246.0 X 0.0740 X 26.0 = 473 R-19 Wall (VV) 521.0 X 0.0740 X 33.0 = 1,272 X X = X X = X X _ X X _ Page Total 4,041 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr SwngGlsDr (119/4) (E) 31.5 X 17.2 + 8.5 X 33.8 = 829 SwngGlsDr (119/3) (E) 31.5 X 17.2 + 8.5 X 33.8 = 829 OperableWdw (119/8) (E) 8.0 X 17.2 + 0.0 X 33.8 = 138 OperableWdw (1.19/A) (S) 72.0 X 36.5 + 0.0 X 36.6 = 2,625 FxdWdw (120/A) (VV) 2.2 X 17.2 + 2.3 X 33.8 = 115 SwngGlsDr (120/2) (VV) 3.7 X 36.5 + 16.3 X 72.1 = 1,308 SwngGlsDr (120/3) (VV) 3.7 X 17.2 + 16.3 X 33.8 = 614 OperableWdw (120/8) (VV) 2.2 X 17.2 + 2.3 X 33.8 = 115 X + X = Page Total 6,572 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. = 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.24 X 54.28. X 40' = 2,867 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 13,710 Latent Gain Btu/hr Occupants 1.0 Occupants X 200 Btuh/occ. = 200 Infiltration: 4,771 X 1.24 X 54.28 X 0.00467 = 1,501 Air Sensible CFM ELA Aw TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,701 Ener Pro 5.1 bV Ener Soft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Page 35 of 42 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Beds #1/#2 Outdoor Dry Bulb Temperature 112 OF Floor Area 867.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr R-38 Roof - Icynene 867.0 X 0.0290 X 56.0 = 1,408 R-19 Wall (N) 24.0 X 0.0740 X 23.0 = 41 R-19 Wall . (E) 153.0 X 0.0740 X 33.0 = 374 R-19 Wall (S) 17.0 X 0.0740 X 26.0 = 33 R-19 Wall (lq 440.0 X 0.0740 X 33.0 = 1,074 X X _ X X = X X = X X _ Page Total 2,930 Items shown with an asterisk (*) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr SwngGlsDr (12911) (E) 39.0 X 17.2 + 0.0 X 33.8 = 670 SwngG1sDr(12511) (W) 7.5 X 17.2 + 32.5 X 33.8 = 1,228 FxdWdw (1261A) (W) 2.2 X 17.2 + 2.3 X 33.8 = 115 FxdWdw (1271A) (W) 2.2 X 17.2 + 2.3 X 33.8 = 115 OperableWdw (1291A) NO 9.0 X 17.2 + 18.0 X 33.8 = 763 X + X - X + X - X + X _ X + L X = Page Total 2,891 Internal Gain Btu/hr Occupants 2.0 Occupants X 230 Btuh/occ. = 460 Equipment Dwelling Unit X 1,600. Btu = o Infiltration: 1.064: X 1.24 X 47.44 X 40 = 2,505 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 8,786 Latent Gain Btu/hr Occupants 2.0 Occupants X 200. Btuh/occ. = 400 Infiltration: 4,771 X 1.24 X 47.44 X 0.00467 .= 1,312 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1 712 Ener Pro 5.1 bV Ener Soft User Number: 3665 RunCode: 2010-10-14T11:18:57 ID: Pa a 36 of 42 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Great Room/Kitchen Outdoor Dry Bulb Temperature 112 OF Floor Area 2,085.0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Dailv Ranae: 34 OF Opaque Surfaces *R-0 Floor (F.0.2x .16) R-38 Roof - Icynene R-19 Wall S1dWdDr (103/1) R-19 Wall R-19 Wall R-19 Wall R-19 Wall R-19 Wall Orientation (N) Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' c 0 0 = c c 0 = 948.0 0.0460 0.0 1,137.0 0.0290 56.0 747.0 0.0740 23.0 40.0 1.4500 23.0 646.5 :0.0740 33.0 7.6 0.0740 31.0 493.2 0.0740 26.0 178.4 0.0740 33.0 7.6 0.0740 31.0 17.2 13.5. Page Total Items shown with an asterisk (*) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration OperableWdw (133/A) FxdWdw (117/A) FxdWdw (117/8) FxdWdw (103/8) FxdWdw (117/1) . FxdWdw (117/H) OperableWdw (112/A) FxdWdw (114/6) FxdWdw (114/A) Orientation (N) (N) (N) (N) (N) (N) (N) (E) (E) Shaded Unshaded 0 1,846 1,271 1,334 1,579 17 949 436 171 1 7,4501 Area X X X X X X X X X GLF + + + + +. + + + Area X X X X X X X X X GLF = 0 = _ = 0.0 17.2 4.5 17.2 0.0 17.2 5.5 17.2 0.0 17.2 5.5 17.2'. 0:0 17.2 6.0 17.2 0.0 17.2 3.0 17.2 0.0 17.2 3.0 17.2 0.0 17.2 13.5. 17.2 2.2 17.2+ 3.8 33.8 2.2 17.2 3.8 1 33.8 Page Total Btu/hr 77 95 95 103 52 52 232 165 165 1.036 Internal Gain Btu/hr Occupants 2.0 Occupants X 230 Btuh/occ. = 460 Equipment 1.0 Dwelling Unit X 1,600 Btu = 1,600 Infiltration: 1.064 X 1.24 X 114.09 X 6,025 Air Sensible. CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 25.7421 Latent Gain . Btu/hr Occupants 2.0 Occupants X 200 Btuh/occ. = 400 Infiltration: 4,771 X 1.24. X 114.09 X 0.00467 = 3,154 Air Sensible CFM ELA Aw. I TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 3:5541 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Great Room/Kitchen Outdoor Dry Bulb Temperature .112 OF Floor Area 2,085.0 ftZ Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature . . 72 OF Outdoor Dailv Range: 34 OF Surfaces r Orientation Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' = = = = = = GLF Area GLF 6.8 _ 17.2 + 6.7 X 33.8 = 9.3 X 36.5 + 14.7 X 72.1 = 39.0 X Page Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration OperableWdw (112/8) SwngGlsDr (110/1) SwngGlsDr (132/2) SwngGlsDr (132/1) FxdWdw (103/A) FxdWdw (117/C) FxdWdw (117/D) Fi dWdw (117/E) FxdWdw (116/A) Orientation (E) (E) (E) (E) (SE) (S) (s) (S) (S) Shaded Unshaded Area GLF Area GLF 6.8 X 17.2 + 6.7 X 33.8 = 9.3 X 36.5 + 14.7 X 72.1 = 39.0 X 17.2 + 0.0 X 33.8 39.0 X 17.2 + 0.0 X 33.8 0.0 X 17.2. + 6.0 X 23.6 = 0.0 X 17.2 + 3.8 X. 17.3 = 0.0 X 17.2'+ 3.8 X 17.3 = 0.0 X 17.2 + 3.8 X 17.3 = 0.0 X 17.2 + 3.8 X Page Total Btu/hr Btu/hr 344 1,399 670 670 142 66 66 66 66 3, 488 Internal Gain Btu/hr Occupants 2.0 Occupants X 230 Btuh/occ. = 460 Equipment 1.0 Dwelling Unit X 1,600 Btu = 1,600 Infiltration: 1.064 X 1.24 X 114.09 X Air Sensible CFM ELA AT I TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 25,7421 Latent Gain Btu/hr Occupants 2.0 Occupants X 200 Btuh/occ. = 400 Infiltration: 4,771 X 1.24 X 114.09, X 0.00467 = 3,154 Air Sensible CFM ELA AW I TOTAL HOURLY LATENT HEAT GAIN FOR ROOM . 3.5541 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Great'Room/Kitchen Outdoor Dry Bulb Temperature 112 OF Floor Area 2,085.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr X X X X X X _ X X = X X = X X _ X X X X _ X X _ Page Total 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr FxdWdw (116/8) (S) 0.0 X 17.2 + 3.8 X 17.3 = 66 FxdWdw (116/C) (S) 0.0 X. 17.2 + 3.8 X . 17.3 = 66 SGD (117/1) (S) 216.0 X 17.2 + 0.0 X 17.3 = 3,713 SGD (114/1) (S) 72.0 X 17.2' + 0.0 X 17.3 = 1,238 FxdWdw (103/D) (lM 0.0 X 17.2 + 6.0 X 33.8 = 203 FxdWdw (117/F) (VV) 0.0 X 17.2 + 3.8 X 33.8 = 128 FxdWdw (117/G) (lM 0.0 X 17.2 + 3.8 X 33.8 _ 128 FxdWdw (103/C) (Sly 0.0 X 17.2 + 6.0 X 23.6 _ 142 X + X = Page Total 5,684 Internal Gain Btu/hr Occupants 2.0 Occupants X 230 Btuh/occ. = 460 Equipment 1.0 Dwelling Unit X 1,600 Btu = 1,600 Infiltration: 1.064 X 1.24' X 114.09 X 40 : = 6,025 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 25,742 Latent Gain Btu/hr Occupants 2.0 Occupants. X 200 Btuh/occ: = 400 Infiltration: 4,771 X 1.24 X 114.09 X 0.00467 = 3,154 Air Sensible CFM ELA OW TOTAL HOURLY,LATENT HEAT GAIN FOR ROOM. 3,554 Ener Pro 5.1 bV Ener Soft User Number. 3665 RunCode: 2010-10-14711:18:57 ID: Page 39 of 42 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Upstairs Casita Outdoor Dry Bulb Temperature 112 OF Floor Area 948.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Dailv Ranae: 34 OF ODaaue Surfaces R-38 Roof - Icynene R-19 Wall R-19 Wall R-19 Wall R-19 Wall SIdWdDr (204/1) Orientation (E) r0l Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' = = = = = 948.0 0.0290, 56.0 166.0 0.0740 23.0 347.4 0.0740 33.0 152.0 0.0740 26.0 212.0 0.0740 33.0 24.0 1.4500 33.0 0.0 17.2 11.3 33.8 0.0 17.2 11.3 33.8 0.0 17.2 10.0 Page Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) I Fenestration FxdWdw (203/8) FxdWdw (203/C) FxdWdw (203/D) OperableWdw (203/E) OperableWdw (201/8) OperableWdw (201/A) OperableWdw (202/A) OperableWdw (203/A) FxdWdw (201/C) I Internal Gain Orientation Shaded Unshaded Area X X X X X X X X GLF + + + + + + + + + Area X X X X X X X X X GLF = = = = 0.0 17.2 14.0 17.2 0.0 17.2 14.0 17.2 0.0 17.2 14.0 17.2 0.0'X 17.2 14.0 17.2 0.0 17.2 11.3 33.8 0.0 17.2 11.3 33.8 0.0 17.2 10.0 33.8 0.0 17.2 10.01 33.8 0.0 17.2 1 20.01 1 17.3 Page Total 1.0 Occupants X 230 Btuh/occ. _ 0.0 Dwelling Unit X 1,600 Btu = I Infiltration: 1.064 X 1.24. X 51.87 X 40 = Air Sensible CFM ELA AT LE HEAT GAIN FOR ROOM Latent Gain Occupants 1.0 Occupants X 200; Btuh/occ. Infiltration: 4,771 X 1.24_ X 51.87 X 0.00467 Air Sensible CFM ELA AW Btu/hr 1,540 283 848 292 518 1,148 4, tnumr 241 241 241 241 382 382 338 338 345 2, 748 Btu/hr 230 0 2,739 11,858 Btu/hr 200 1,434 TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,6341 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Upstairs Casita Outdoor Dry Bulb Temperature 112 OF Floor Area 948.0 ftZ Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 °F Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr X X = X X X X _ X X' _ X X = X X = X X = X X = X X Page Total 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) . Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr SwngGlsDr (201/2) (S) 0.0 X 17.2 + 48.0 X 17.3 = 828 FxdWdw (201/D) (S) 0.0 X '17.2 + 20.0 X 17.3 = 345 Operable Wdw (2037F) (VV) 0.0. X 17.2 + 10.0 X 33.8 = 338 X + X = X + X = X + X = X + X - X + X - X + X = Page Total 1,512 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ._ .230 Equipment 0.0 Dwelling Unit- X 1,600. Btu = 0 Infiltration: 1.064 X 1.24 X 51.87. X 40 = 2,739 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 11,858 Latent Gain Btu/hr Occupants 1.0 Occupants X 200 'Btuh/occ. _ '200 Infiltration: 4,771 X 1.24 X 51.87, X 0.00467 = 1,434 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,634 Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 /D: Pa a 41 of 42 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date "Colonial" 10/14/2010 ROOM INFORMATION DESIGN CONDITIONS Room Name Guest Casita Outdoor Dry Bulb Temperature 112 OF Floor Area 515.0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 72 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr R-38 Roof - Icynene (N) 515.0 X 0.0290 X 56.0 = 836 R-19 Wall (N) 265.0 X. 0.0740 X 23.0 = 451 R-19 Wall (E) 193.0 X 0.0740 X 33.0 .= 471 R-19 Wall (S) 55.0 X 0.0740 X 26.0 = 106 R-19 Wall (Vl7 243.0 X 0.0740 X 33.0 = 593 X X = X X = X X = X X = Page Total 2,458 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF • Btu/hr OperableWdw (134/A) (N) 0.0 X . 17.2 + 15.0 X 17.2 = 258 OperableWdw (134/8) (N) 0.0 X 17.2 + 15.0 X 17.2 = 258 OperableWdw (137/A) (E) 0.0 X, 17.2 + 8.0 X 33.8 = 271 SwngGlsDr (134/1) (E) 39.0 X 17.2 + 0.0 X 33.8 = 670 FxdWdw (135/A) 2.2, X 17.2 + 2.3 X 33.8 = 115 X + X = X + X - X + - X = X +. X = Page Total 1,571 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. = 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.24 X 28.18: X. 40 _ 1,488 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 5,747 Latent Gain 1.0 Occupants X '. 200 Btuh/occ. _ Btu/hr 200 Occupants Infiltration: 4,771 X ' 1.24 X 28.18 X 0.00467 = 779 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 979 Ener Pro 5.1 by Ener Soft User Number: 3665 RunCode: 2010-10-14711:18:57 ID: Page 42 of 42