10-1396 (AR). -it
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
(Application Number: r0=0 013 96
00
tProperty-Address: 5-4-0-82 AVENIDA BERMUDAS
APN: 774-225-017-7 -000000-
Application description: ADDITION - RESIDENTIAL
Property Zoning: COVE RESIDENTIAL
Application valuation: 3604
Ti&
f 4
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Applicant: Architect or Engineer:
OJAWCrZ
--------------------------------------------------
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
License Class: License No.:
Date: Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any pplicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars 155001.:
( ) 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.). '
( 1 I am exempt under Sec. , B.&P.C. f reason
Date: / Owner:
I CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPEIL\IIT
Owner:
SAKAMOTO PATRICK F
*NOT ON FILE
UNKNOWN, CA 99999
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (160) 777-7153
Date: 2/22/11
Contractor:ir�1 1 20 11
Owner
CITY OF S.A 0.' UINTA
------------------
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier Policy Number
_ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation la *f California,
and agree that, if I should - e subjec to thew rkers' compensation pro io of Section
Mt
of the Labor Cod I sh fort th c m ith those provisions.Date:Applicant:
WAR TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE C6ST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply wi h all
city and county ordinances and state laws relating to building const tion, and hereb thorize represe t es
ofAhis court to enter pon the above-mentioned property for - pe u os
Date: Signature (Applicant or Agent):
a
LQPEILNIIT
Application Number . . . . . 10-00001396
Structure Information
Construction Type . . . . . TYPE V, UNPROTECTED
Occupancy Type . . . . DWELLG/LODGING/LONG <=10
Other struct info . . . . . CODE EDITION 2007/08ENERGY
FLOOD ZONE NO
1ST FLOOR SQUARE FOOTAGE 63.00
----------------------------------------------------------------------------
Permit . . . BUILDING PERMIT
Additional desc . . 63 SF CLOSET ADDITION
Permit Fee . . . . 63.00 Plan Check Fee .
Issue Date . . . . Valuation . . . .
Expiration Date . . 8/21/11
40.95
3604
Qty Unit Charge Per Extension
BASE FEE 45.00
2.00 9.0000 THOU BLDG 2,001-25,000 18.00
----------------------------------------------------------------------------
Permit . . . ELECT - ADD/ALT/REM
Additional desc . .
Permit Fee . . . . 17.21
Issue Date . . . .
Expiration Date . . 8/21/11
Plan Check Fee . . 4.30
Valuation . . . . 0
Qty Unit Charge
Per
Extension
BASE FEE
15.00
63.00 .0350
ELEC NEW RES - 1
OR 2 FAMILY
2.21
----------------------------------------------------------------------------
Special Notes and Comments
63 SF CLOSET ADDITION
TO EXISTING FRONT
BEDROOM. CONVENTIONAL
LIGHT FRAME
CONSTRUCTION. 2007 CODES 2008 ENERGY.
----------------------------------------------------------------------------
Other Fees . . . . .
. . . . BLDG STDS ADMIN
(SB1473)
1.00
ENERGY REVIEW
FEE
4.10
STRONG MOTION
(SMI) - RES
.50
Fee summary Charged Paid
Credited
Due
---------------------------
Permit Fee Total
--------------------
80.21 .00
----------
.00
80.21
Plan Check Total
45.25 .00
..00
45.25
Other Fee Total
5.60 .00
.00
5.60
Grand Total
131.06 .00
.00
131.06
Bin #
Cit! of. La Quints
Building or Safety Dbrislon
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit # Q
Project Address: ������yJ���
Owner's Name:
A. P. Number. � 7 �- Z� ;" — �/ %
Address: 590&2 ,oWgF AS , '//L!E' "6W
lo7Gr,EiC�v'z � •'
7
Legal Description: �n g C-2
City, ST, Zip: 1,19 G-.dis7� 1 V0 Z,S�
Contractor:
Telephone:
Address:
Project Description:
City, ST, Zip:
t X
Telephone:
State Lie. # : City Lie. #;
Arch., Engr.; Designer.
Address:
City., ST, Zip:
Telephone: Construction Type: ,r_,0C•E Occupancy: 54407A ed
State Lie. #: �" Project type (circle, one): New Add'n Alter Repair Demo
Name of Contact Person: �[./ OY �T Sq. Ft.: b # Stories: / # Units:
[Estimated
Telephone # of Contact Person: _35-4s/
Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Reed
TRACKING PERMTT FEES
Plan Sets
Plan Check submitted Item
Amount
Structural Coles.
Reviewed, ready for rrections t Z Plan Check Deposit
Truss Cales.
Called Contact Person l Z Plan Check Balance .
Tule 24 Coles.
Plans picked up Construction
Flood plain plan
Pians resubmitted Mechanical
Grading plan
2`' Review, ready for correctionl&u y'=. Electrical
Subcontactor List
Called Contact Person L Plumbing
Grant Deed
Pians picked up ML
H.O.A. Approval
Plans resubmitted Grading
IN HOUSE:-
3" Review, ready for corrections/issue Developer Impact Fee
Planning Approval
Called Contact Person AXP. P.
Ak
Pub. Wks. Appr
Date of permit Issue
School Fees
Total,Permit Fees
3�
ti
Prescriptive Certificate of Compliance: CF -111 ADD
Residential Additions (Pagel of5)
Site Address:
5t%02. — l
Enforcement Agency:
Date:
Proposed 5ee Note
Standard
Values From JA4 Table
General Information
Project Nam
6405 4F�Di>1i'`4:0
Climate Zone #
I Is'
# of Stories
I I
Building Type Single Family ® Multi Family
Circle the Front Orientation: N, E, S, W or Degreesi
Conditioned Floor Area of Addition
(CFA): -4P I
New Addition Size; Wess than or equal to 100 ft2 DLess than or equal to 1000
Do not use this orm or additions greater than 1000A
NOTE. For Alterations to an existing home, submit a completed CF -IR ALT Form.
Exception: Existing HVAC s stems that are replaced or altered to serve the addition may be included on the CF -JR ADD Form
PRESCRIPTIVE ENVELOPE REQUIREMENTS FOR ADDITIONS
For standard wood and assemblies meeting the Cavity R -value only.
• For 100 ft2 additions; the Proposed values must be equal or greater than the Standard column or when indicated when using Package A
"Pkg D ”. Enter values in the shaded Proposed Columns.
• For less than 1, 000ftzadditions must comply with "Pkg D" requirements unless indicated in the Standard Column. To meet "Pkg D" minimum
energy compliance re ruirements, see RCMAppendix B, Table 151-C or 152 in the RCM. Enter values in the shaded Proposed Columns.
Size of Addition
100 ft2 or less
Less than 1,000 fe
Component
Standard
Proposed
Comment
Standard Proposed
Comment
Ceiling Insulation
R-19
A 11
Minimum
Pkg D
Table 151-C
Wall Insulation
R-13
9113
Minimum
R-13
Minimum
Floor Insulation
R-13
Minimum
Pkg D
Table 151-C
Fenestration
U-
factor
SHGC
U-
factor
SHGC
Enter Values
From
"Fenestration
Proposed
Areas"
Page 2 of 5
U-
factor
U-
SHGC factor
SHGC
Enter Values From
"Fenestration
Proposed Areas "
Pae 2 of 5
0.40
Pkg D
Q o
Q�
0.40
Pkg D
Maximum Glazing
Area
50 fe
>
/_ fe
AdditiogAlone'
Enter Values From
"Addition Allowed
Fenestration Areas"
Page 3 of 5
For West -Facing fe
Orientation
Radiant Barrier
N/A AIA
Pkg D Table 151-C
Roofing
N/A See Roofing Products Below
Pkg D See Roofing Products Below
OPAQUE SURFACE DETAILS For the furred portioned of Mass Walls see Furring Strips Construction Table below.
A B C D
E F
G H I
J
Proposed 5ee Note
Standard
Values From JA4 Table
Framing Thickness,
Tag/ Assembly N Material Spacing,
ID' or Type' d Size or Other'
U- JA4 Table
factor Numbers
Framed Continuous
Cavity Insulation
R-value6 R -Value?
JA4
Assembly
Cell Values
Proposed
Assembly
U -facto?
Uf
TY MLA CJIJINTA
Note: For furred assemblies, accountingfor Continuous Insulatio R-(p���
FurringConstruction table below.
fe d
M E J
n 4-1. For calcu atingfurred walls use the Mass an
.APPROVED
FOR CONSTRUCTION
Registration Number: Registration Date/Tfine: -' TIERS Provider:
2008 Residential Compliance Forms 4� t p - i "(e . March 2010
Prescriptive Certificate of Compliance: CF -1R ADD
Residential Additions (Page 2 of 5
Site Address:
5ZI082-
Enforcement Agency:
Date:
M
Proposed Proper f Masonry and Concrete
Added Interior or Exterior Insulation
1. For TaglID indicate the identification name that matches the building plans.
2. Indicate the Assembly Name or type: Roof/Ceiling, Walls, Floors, Slabs, Crawl Space, Doors and etc..: Indicate in column G the Frame material
and Size: For Wood Metal, Metal Buildings, Mass, enter 2x4, 2x6, or etc... see JA4 for other possible frame type assemblies.
3. Enter the thickness for mass in inches or Spacing between framing members enter; 16"or 24 "OC; or Other for all other assembly description
such as Concrete Sandwich Panel, Spandrel Panel, Logs, Straw Bale Panel, and etc....
4. Based on the Climate Zone; enter the equivalent U factor found in JA4 Table based on the R -Value from Table 151-C
5. Enter the Table number that closely resembles the proposed assembly.
6. Enter the R -value that is being installed in the wall cavity or between the framing; otherwise, enter 110 ".
7. Enter the Continuous Insulation R -value for the proposed assembly; otherwise, enter "0".
8. Enter the row and column of the U factor value based on Column F Table Number and enter the Assembly U factor in Column J.
9. The Proposed Assembly U factor, Column J, must be equal to or less than the Standard U factor in Column E to comply.
F4JJRWNG STRIPS CONSTRUCTION TABLE
FOR MASS WALLS ONLY
A B C D I E
F I G I R I J I K
L
M
Proposed Proper f Masonry and Concrete
Added Interior or Exterior Insulation
Walls Froni—Reftrence
in Furring Space from Reference
Joint Appendix Table 4.3.5, 4.3.7
Joint Appendix Table 4.3.13
_
N
V
O
N
i0
o
N
= �
Y a�
T id
y
Assembly
;,
..
s
o '
L
F F `o
c
?
Final
Mass
Name or JA4 Table
.
._
C x 3
N .0 =
°0 a
r a
Assembly
Thickness
T NumbeP
¢ >
_
3
¢ >
U -factor ''
Comment
1. Indicate the Mass Thickness from Reference Joint Appendix JA.
2. Indicate the Assembly Name or type: RooflCeiling, Walls, Floors, Slabs, Crawl Space, Doors and etc... Indicate t ame type and Size: For
Wood Metal, Metal Buildings, Mass, enter 2x4, 2x6, or etc... see JA4 for other possible frame type assemblies.
3. Enter the Table number that closely resembles the proposed assembly.
4. Enter the row and column of the U factor value.
5. Enter the Effective R -value listed in the JA4 Table Number.
6. The Final Assembly is calculated by using Equation 4-1 or Equation 4-4 of the Reference Joint Appendix JA4. Enter the value in Column L.
7. Insert the Final Assembly U- actor value back on to the Opaque Sur ace Details table in Column J.
FENESTRATION PROPOSED AREAS
Orientation
Fenestration Type and Frame (North, East, ProposedArea' Maximum Maximum NFRC or
window, Glass Door or Skylight) South, West) (ft` U -factor`'' SHGC" Default Values'
Total
L Fenestration area is the area of total glazed product (i.e. glass plus frame). Exception: When a door is less than 50% glass, the fenestration
area may be the glass area plus a "2 inch frame" around the glass.
2. Enter value from Component Package D Requirements in Table 151-C.
3. Actual fenestration products installed and as indicated in CF -6R -ENV Form shall be equivalent to or have a lower U factor and/or a lower
SHGC value than that specified on the Fenestration Proposed Area table above.
4. Submit a completed WS- R Form if a reduced SHGC is calculated with exterior shading.
5 1 a licable at this sta a nter "NERC" or NFRC Certified windows or CEC "Default " valuesfound in Table 116-A or B.
Registration Number. Registration DatelTime: HERS Provider:
2008 Residential Compliance Forms
March 2010
Prescriptive Certificate of Com fiance: CF -1R ADD
Residential Additions (Page 3 of 5
Site Address: Enforcement Agency: Date:
ADDITION ALLOWED FENESTRATION AREAS
Check applicable box below if the roof addition is exempt from the roofing product "Cool Roof' requirements. Note: If arty one of the boxes are
A
B
C
D
E
❑ Roofing area covered by building integrated; photovoltaic panels and solar thermal panels are exempt from the above Cool Roof criteria
F
Note: If no CRRC-I label is available, this compliance method cannot be used, use the Performance Approach to show compliance, otherwise, check
�FA of
Addition
Allowed %
Allowed Area
Area
Removed z
Maximum
Allowed Area
Proposed Area s
(�3)
W
of CFA
A x B)
��
fe
C + D
Reflectance 3.4
(Table Above)
Total Fenestration Area3
0.203
>
West Fenestration Area
8
0.05
(Required In CZ's 2, 4 & 7 -15)
❑
❑
1. West Fenestration Area includes west -sloping skylights and any skylights with a pitch less than 1:12.
2. Glass removed to make way for the addition.
3. For additions less than 1,000 ft2 the standards allows glazing removed during the remodel to be added to the glazing area allowance. The
maximum allowed glazing area for the addition is the CFA x 20% + glass removed to make way for the addition.
4. In climate zones 2, 4, 7-15, no more than 5% of the CFA is allowed for west facing glazing plus west facing glass area removed to make way
for the addition. The maximum allowed west facing glazing area is the CFA x 5% + west facing glass removed to make way for the addition.
5. To meet compliance, the Pro aced Area must be less than orequal to the Total Allowed Area or BOTH the Total and West Fenestration Areas.
ROOFING PRODUCTS (COOL ROOFS) §.1511912
Check applicable box below if the roof addition is exempt from the roofing product "Cool Roof' requirements. Note: If arty one of the boxes are
checked below, the Aged Solar Reflectance and Thermal Emittance requirements for roofing products in §118(i) are not applicable. Do not fill
table below.
Roofing compliance Not Required in Climate Zones 1-12, 14, and 16 with a Low -Sloped. Less or 2:12 pitch.
Roofing compliance Not Required in Climate Zones I through 9 and 16 with a Steep -Sloped. Roofs pitch greater than 2:12 and product weight
less than 5lb/ft 2.
❑ Roofing area covered by building integrated; photovoltaic panels and solar thermal panels are exempt from the above Cool Roof criteria
Roof constructions that have thermal mass over the roof membrane with at least 25 lb/ft is exempt from the above Cool Roof criteria -
Note: If no CRRC-I label is available, this compliance method cannot be used, use the Performance Approach to show compliance, otherwise, check
e applicable box below if Exempt from the Roofing Products "Cool Roof' Requirement:
Roof Slope
Product Weight
Product
Aged Solar
Thermal
CRRC Product 1D Number'
<_ 2:12 > 2:12
< 5lb/ft>_ 5lb1fe
Tyve2
Reflectance 3.4
Emittance
SRI5
❑
❑
❑
❑
❑4
®
❑
®
®
El
❑
❑
®
❑
@J
❑
❑
❑
❑
❑4
1. The CRRC Product ID Number can be obtained from the Cool Roof Rating Council's Rated Product Directory at
www. coolroofs. oM/products/searchphQ.
2. Indicate the type of product is being used for the rooftop, i.e. single ply roof, asphalt roof, metal roof, etc.
3. If the Aged Reflectance is not available in the Cool Roof Rating Council's Rated Product Directory then use the Initial Reflectance value from the
same directory and use the equation (0.2+0.7(p m,;Qj — 0.2) to obtain a calculated aged value: Where pis the Initial Solar Reflectance.
4. Check box if the Aged Reflectance is a calculated value using the equation above.
5. Calculate the SRI value by using the SRI- Worksheet at http://www. energy. ca.aov/title24/and enter the resulting value in the SRI Column above
and attach atopy of the SRI- Worksheet to the CF -IR.
To apply Liquid .Field Applied Coatings, the coating must be applied across the entire roof surface and meet the dry mil thickness or coverage
recommended by the coatings manufacturer and meet minimum performance requirements listed in §118(i)4. Select the applicable coating:
11Aluminum-PigmentedAsphalt Roof Coating
JaCement-Based Roof Coating
❑ Other
Registration Number:
2008 Residential Compliance Forms
Registration Date/Time: HERS Provider:
March 2010
Prescriptive Certificate of Compliance: CF -1R ADD
Residential Additions (Page 4 of 5
Site Address: Enforcement Agency: Date:
154142017 AVAIIAWv11f_> ,27X l� r�
HVAC SYSTEMS - HEATING
List water heaters and boilers for both domestic hot water (DHW) heaters and hydropic space heating. Individual dwelling DHW heaters must be
storage gas or propane fired, non -recirculating, and may not exceed 50 gallons. If no natural gas is connected to the building, an electric storage
DHW heater less than 50 gallons with an energy factor greater than 0.90 maybe used. Hot water pipe insulation from the DH.W heater to the
Duct or
Configuration
Configuration
Minimum Distribution
Efficiency Type and
SEER/EER or COP Location
Minimum Distribution
Piping
External Tank
(Central, Split,
Heating Equipment
Efficiency Type and
Insulation
Thermostat
Space, Package or
Type and Capacity', z 3
AFUE or HSPF Location°
R -value
Type
H dronic
�
1. Indicate Heating Type (Central Furnace, Wall Furnace, Heat pump, Boiler, Electric Resistance, etc)
2. Electric resistance heating is allowed only in Component Package C, or except where electric heating is supplemental (i.e., if total capacity
< 2 KW or 7,000.Btu/hr electric heating is controlled by a time -limiting device not exceeding 30 minutes). See §151(6)3 exception.
3. Refer to the HERS Verification section on Pages 3 and 4 of the CF -JR -ADD Form for additional requirements and check applicable boxes.
4. Indicate Type or Location Ducts, H dronic in Floor, Radiators, etc.
HVAC SYSTEMS - COOLING
List water heaters and boilers for both domestic hot water (DHW) heaters and hydropic space heating. Individual dwelling DHW heaters must be
storage gas or propane fired, non -recirculating, and may not exceed 50 gallons. If no natural gas is connected to the building, an electric storage
DHW heater less than 50 gallons with an energy factor greater than 0.90 maybe used. Hot water pipe insulation from the DH.W heater to the
kitchens and on all underground hot water pipes is required in all component packa es in all climate zones.
Configuration
Cooling Equipment
Type and Capacity 1,2
Minimum Distribution
Efficiency Type and
SEER/EER or COP Location
Duct or Piping
Insulation Thermostat
R -Value Type
(Central, Split,
Space, Package or
H dronic
External Tank
Water Heater Type/Fuel
Distribution Type
Number In
Tank
Energy Factor or
Insulation
Type'
1. Indicate Cooling Type (A/C, Heat pump, Evap. Cooling, etc).
2. Refer to the HERS Verification section on Pages 3 and 4 of the CF -IR -ADD Form for additional requirements and check applicable boxes.
3. Indicate T e.or Location(Ducts, H dronic in Floor, Radiators, etc.
WATER HEATING
List water heaters and boilers for both domestic hot water (DHW) heaters and hydropic space heating. Individual dwelling DHW heaters must be
storage gas or propane fired, non -recirculating, and may not exceed 50 gallons. If no natural gas is connected to the building, an electric storage
DHW heater less than 50 gallons with an energy factor greater than 0.90 maybe used. Hot water pipe insulation from the DH.W heater to the
kitchens and on all underground hot water pipes is required in all component packa es in all climate zones.
Heated Slab Insulation
®YES JIMNO I Slab edge insulation required for heated slabs in all Climate Zones. See details in Table 118-A of the standards.
Raised Slab Insulation
® YES
0 NO
External Tank
Water Heater Type/Fuel
Distribution Type
Number In
Tank
Energy Factor or
Insulation
Type'
Standard, Recirculatin z
System
Capacity (
Thermal Efficient
R-Value3
1. Indicate Type (Storage Gas, Heat Pump, Instantaneous, etc)
2. Recirculating systems serving multiple dwelling units shall meet the recirculation requirements of §150(n). .The Prescriptive requirements do
not allow the installation of a recirculating water heating system for single dwelling units.
3. The water heating tank and i es shall be insulated to meet the requirements o 150 ' .
SPECIAL FEATURES The enforcement agency should pay special attention to the Special Features specified in this checklist below. These
items may require written justification and documentation and special verification. Applicable special features shall be marked with a YES and be
specified within the plans.
Radiant Barrier (Rook)
®YES J &NO I Required in Climate Zones 2, 4, and 8-15 for additions larger than 100 fe.
Slab Edge (Perimeter) Insulation
YES I KdNO I In Climate Zone 16 under Component Package D, R-7 insulation is required.
Heated Slab Insulation
®YES JIMNO I Slab edge insulation required for heated slabs in all Climate Zones. See details in Table 118-A of the standards.
Raised Slab Insulation
® YES
0 NO
In Climate Zones 1, 2, 11, 13, 14 & 16 R-8 insulation is required, and in Climate Zones 12 & 15 R-4 insulation is required
under Component Package D.
Thermal Mass - To obtain Compliance Credit for the installation of thermal mass, use the Performance Approach.
Registration Number: Registration Date/Time: KERS Provider:
2008 Residential Compliance Forms
March 2010
0
N j�
NIA
NIP
Prescriptive Certificate of Compliance: CF -111 ADD
Residential Additions (Page 5 of
Site Address: Enforcement Agency: Date:
6--1109Z 41185411,04 43e1?1jW4e2Cif 1
HERS VERIFICATION SUMMARY - The enforcement agency should pay special attention to the HERS Measures specified in this
checklist below. A completed and signed CF -4R Form for all the measures specified shall be submitted to the building inspector before final
inspection.
Duct Se ling & Testing
HERS verification is re uired or this measure.
[]YES
[3NO
In all Climate Zones, if a new space -conditioning system (HVAC equipment and ducting) is installed to serve the addition
Address:
If Applicable UEA or UEPE
alone, the ducts are to be sealed and tested per §151(f)10.
(Certification #):
City/State/Zip:
In Climate Zones 2 and 9-16, if more than 40 linear feet of new or replacement ducts are installed in unconditioned
DYES
ONO
space to serve the addition, the ducts are to be sealed and tested per § 152(b)ID. ® EXCEPTION: Existing duct systems
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the building design identified on
this Certificate of Compliance.
that are extended, which are constructed, insulated or sealed with asbestos.
to the requirements of Title 24, Parts 1 and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information provided to document this
In Climate Zones 2 and 9-16, if the existing HVAC equipment is replaced (including replacement of the air handler, outdoor
agency for approval with this building permit application.
Name:
condensing unit of a split system, cooling or heating coil, or the furnace heat exchanger) and will serve the addition, the ducts
Company:
Date:
are to be sealed and tested per § 152(b) IE.
®YES
ONO
® EXCEPTION: Duct systems that are documented to have been previously sealed confirmed through HERS
verification in accordance with procedures in the Reference Residential Appendix RA3.
® EXCEPTION: Duct systems with less than 40 linear feet in unconditioned space.
EXCEPTION: Existing ducts stems constructed, insulated or sealed with asbestos.
Refr' erant Cha%e - Split System HERS verification is re uired or this measure.
OYES
EINO
_ In Climate Zones 2 and 8-15, if a newly ducted split A/C or heat pump is installed to serve the addition alone, a refrigerant
chara measurement shall be verified per § 151( 7A.
OYES
In Climate Zones 2 and 8-15, if the existing HVAC equipment is replaced (including replacement of the air handler, outdoor
EIN0
condensing unit of a split system, cooling or heating coil, or the fumace heat exchanger) and will serve the addition, a
refrigerant charge measurement shall be verified per § 152 b 1F.
Central
Fan Integrated Ventilation System — Airflow and Fan Watt Draw - do not apply for additions 1,000 fig or less.
Ducted Split Systems - Air Conditioners and Heat Pumps: Airflow and Fan Watt Draw HERS verification is required.
YES
rNO
In Climate Zones 10 through 15, if a new space -conditioning system (HVAC equipment and ducting) is installed to serve the
addition alone, the airflow and fan watt draw shall be verified per § 151 7B.
YES
�]vp
In Climate Zones 10 through 15, if the existing space -conditioning system (HVAC equipment and ducting) is replaced and
M�
will serve the addition, the airflow and fan watt draw shall be verified per § 152 1F.
Documentation Author's Declaration Statement
• I certify that this Certificate of Compliance documentation is accu and complete.
Name:
Signature:
06-0IDeWV 14
Company:
Date:.
Address:
If Applicable UEA or UEPE
5.48 Z ��/E�/�� 13E.�Iv�a�S
(Certification #):
City/State/Zip:
Phone:
44 aze»777 C/4 9ZZ5-3
7dve?- 576S< 386/
Responsible Building Designer's Declaration Statement
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the building design identified on
this Certificate of Compliance.
• I certify that the energy features and performance specifications for the building design identified on this Certificate of Compliance conform
to the requirements of Title 24, Parts 1 and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information provided to document this
building design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Name:
Signature: _
Company:
Date:
Address:
License:
City/State/Zip:
Phone:
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at. 1-800-772-3300.
Registration Number: Registration DatelTime: HERSProvider:
2008.Residential Compliance Forms March 2010
Solar Reflective Index (SRI) Calculation Worksheet SRIMS
Computer Generated Form
Date:
10/10/2010
Climate Zone:
15
Building Type:
CO) Residential
Nonresidential
Project Name:
el,05&T 14AP101714W
Project Address:
54082 Avenida Bermudas, La Quinta, CA 92253
Roofing Products (Cool Root)
Roofing products with high solar reflectance and thermal emittance are referred to as "Cool Roof', which refers to an outer layer
or exterior surface of a roof. As the term implies, the temperature of a cool roof is lower on hot sunny days than for a
conventional roof, reducing cooling loads and energy required to provide air conditioning.
The benefit of a high reflectance surface is obvious: while dark surfaces absorb the sun's energy (visible light, invisible infrared,
and ultraviolet radiation) and become hot, light-colored surfaces reflect solar energy and stay cooler. However, high emittance is
also important. Emittance refers to the ability of heat to escape from the surface once it is absorbed.. Surfaces with low
emittance (usually shiny, metallic surfaces) contribute to the transmission of heat into the roof components under the roof
surface. The heat can increase the building's air conditioning load, resulting in increased energy costs and detracting from the
comfort level of the home. High-emittance roof surfaces give off absorbed heat relatively quickly through the path of least
resistance: upward and out of the building.
Rating and Labeling
a
Initial 'Weathered
Roofing products that are used for compliance
"
Solar Reflectance 0.00 Pending
with the standards (prescriptive and performance
Thermal Emittance 0.00 Pending
approaches) are required to be tested and labeled
CR
Rated Product ID Number
by the Cool Roof Rating Council (CRRC).
COOL ROOF
Licensed Seller ID Number
Roofing product manufacturers must have their
�""® C' CC>UNCIL
—
Classification Production Line
roofing product tested for solar reflectance and
Cool Roof Rating Council ratings are determined for a fixed set of conditions. and ruay not be appropriate
for deters n ing seasonal energy performance. The actual effect of solar reflectance and thermal emittance
thermal emittance and be labeled aCCordin to
9
CRRC procedures. See example of a CRRC
on building performance ruay vary_
label at right.
-Manufacturer of product stipulates that these ratings were determined in accordance with the applicable
Cool Roof Rating Cot=il procedures.
CRRC-1 Label Attached to Submittal
(Note: If no CRRC-1 label is available, this compliance method cannot be used and another method is required to meet compliance)
CRRC
Product ID
Numbee
Manufacturer
Brand
Model
Product Type
0850-0008
Malarkey
Malarkey RCap
524 RCap Plus
Modified Bitumen
Roof Slope
Product Weight
SRI Calculations
Aged
Relfectance
CRRC listed
Calculated
Initial Solar
Thermal
x2:12
>2:12
< 51b/sq ft
Z 51b/ ft
Listed with
Aged Solar
Aged Solar
Reflectance
Emittance
CRRC?
Reflectance
Reflectance
Yes
0.67
0.86
Solar Reflective 81
Index
2008 Residential and Nonresidential Roof Certificate December 2009
44MbMFM -
Roofing Products
TECHNICAL PRODUCT DATA SHEET
524 RCAPTM PLUS
BRIGHT WHITE REFLECTIVE CAP SHEET
Note: Malarkey Roofing Products"' (Malarkey) Inventory SKU numbers for this product 524
Product Description
Product Use: 524 RCapT°" Plus is a fire -rated cap sheet manufactured with reflective coating. 524 RCap Plus meets the requirements
of the California Energy Code, Title 24, Part 6 as a cap sheet for conventional or modified built-up roofing systems. Approved for use on
all fire -rated roofs. 524 RCap Plus can be applied with hot mopping asphalt or cold process adhesives as a surface sheet for multiple -ply
roofing systems. Please consult with Malarkey Roofing Products for approval of roof systems.
Composition and.Materials: 524 RCap Plus is manufactured on fiberglass mat uniformly impregnated and coated on both sides with
bitumen (asphalt) compounded with a fire -retardant mineral stabilizer. 524 RCap Plus is surfaced with ceramic granules for ultraviolet
protection and weatherability and has a factory -applied reflective coating.
Technical Data
Typical Properties, 1.0 square roll
Application
Weight/ Roll (nominal)
77 lbs (35kg)
Dimensions
39% wide x 33' long
(1 M wide x 10.1 M long)
Coverage
1 Square
Thickness (nominal)
105 mils
Manufacturing location Portland
Recycled Content 0%
Solar Reflective Index (SRI) W(weathered)
'The calculator used in this calculation was the US Green Building
Council (USGBC) LEED-NC 2.2 as of August, 2010. According to the
USGBC Frequently Asked Questions: 'Products cannot be certified:
however, they can contribute to points under the rating system as a part
of a successful submittal.'
As manufactured, 524 RCap Plus meets the requirements of ASTM D3909 (prior to coating).
Fire Rating listed by IntertekMMl.
Complies with California Energy Code, Title 24, Part 6.
Application Procedure: 524 RCap Plus shall be applied as specified with base sheets and/or interply sheets. See Malarkey Specifi-
cation Manual for specific installation instructions. 524 RCap Plus is approved for use on fire -rated built-up roofs. Contact Malarkey's
Technical Department for details.
Precautions: 524 RCap Plus requires dry storage and protection from the weather. Roof decks should be sound, dry, smooth, meet
necessary local requirements, and provide positive drainage.
Technical Assistance: Malarkey has technical services assistance available. Contact Malarkey for details at (800) 545-1191 or (503)
283-1191, weekdays 7:00 a.m. to 5:00 p.m. Pacfic Time.
Malarkey Roofing Products offers various warranties to meet specific requirements. The warranty package for 524 RCap Plus includes 5,
10, 15, and 20 -year limited and unlimited coverage. Contact your roofer, local distribution center or Malarkey for full details.
524 RCap Plus and other Malarkey products are available throughout North America and Pacific Rim countries. Visit www.MalarkeyRoof-
ing.com for additional product information and availability.
Effective 9.101 Supercedes all previously published data
Check for more current version at www.MalarkeyRoofing.com
Corporate Office: 3131 N. Columbia Blvd., Portland, OR 97217-7472 • P.O. Box 17217, Portland, OR 97217-0217
Telephone: (503) 283-1191 • (800) 545-1191 • FAX: (503) 289-7644 • www.MalarkeyRoofinci.com
Date
2/11/11
No.
30931
Owner
P. Sakamoto & D. Lee
Address
54-082 Avenida Bermudas
City
La Quinta Zip 92253
Tract #
Type
Residential Addition
CERTIFICATE OF COMPLIANCE
Desert Sands Unified School District
47950 Dune Palms Road
La Quinta, CA 92253
(760) 771-8515
APN #
Jurisdiction
Permit #
No. of Units
J� IEDSc
4 66` �n'''��o
Q BERMUDA DUNES r
COD RANCHO MIRAGE
�. INDIAN WELLS
PALM DESERT ,y
LA OUINTA
��C INy')
G
774-225-017
La Quinta
1
Lot # No. Street S.F. Lot # No. Street S.F.
Unit 1 54082 Avenida Bermudas 63 Unit 6
Unit 2 Unit 7
Unit 3 Unit 8
Unit 4 Unit 9
Unit 5 Unit 10
Comments
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under
500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile
homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 63 S.F. or $0.00 have been paid for the property listed above and that
building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued.
Fees Paid By Exempt - Deborah Lee Check No.
Name on the check Telephone
Funding Exempt
By Dr. Sharon P. McGehee
Superintendent
Fee collected /exempted by
Signature
Payment Recd 0.00
Q'verlUrider
NOTICE: Pursuant to Government Code Section 66020(d)(1), thisI s rve to notify you that the 9D -day approval period in which you may protest the fees
or other payment identified above will begin to run from the date on w ch the building or installation permit for this project is issued, or from the date on
which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed seal
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
P.O. BOX 1504
LA Q(JINTA,* CALIFORNIA. 92247-1504 DING & SAFETY DEP [ENT
1)r
78-495 CACLE TAMPICO DEC
8 20Bo) 012
1'
LA QUINTA, CALIFORNIA 92253 FAX (760) (760)1'— 7011
PROPERTY, OWNEWS PAOMM
Disclosures & Formas for Owner -Builders Applying for Construction Permits
IMMUM! MOMS TO FROEMW-OWNIER
Dear Property Owner
An. application for a building permit has b il .property
been submitted in your name listing yourself as the u der of the r
improvements specified at
We are Providing You with an Owner -Budder Acknowledgmentand InformatienlVerificationTorm ta-make you aware o€ your
responsibilities and Possible risk -you may incur by -having this permit.issuedm' your name as the.
Owner•Budder. We w4t not issue: a building, permit until you leave read, initiated your understanding of eacW o; siotI,
Pr Ni
signed, and returned this form to as at our official address indicated. An agent of the owner cannot execute t1iisMotice
unless you, the property owner, obtain the prior approval of the permitting authority.
DMECTIONS.• R&d and -initial each statement -below to- signify you understand or ver. ift this Information.
JV1.
Iunderstand a frequent ptactice -of unlicensed persons is to have the property owner obtain an "Owner-Buildee'
bil g permit that erroneously implies that the property 'owner is providing, his. or her own labor and material peri6naft.' 11 as
an Owner -Builder ' , may beiheld liable and subject to serious financial' risk for . any injuries sustained by an unlicensed person.
and his or her employees while working on my property. My homeowner's insurance may not provide coverage for those
injuries. 7
trijuries. I am willfully acting as.an Owner -Builder and am aware of the limits of my insurance -coverage for injuries to workers
.on m property.
I understand building permits are not required to be signed by property owners unless they are resPonsible. for the
construction and are.not hiring a licensed -Contractor to assume this responsibility.
I understaiid as an "Owner -Builder"* I am the reip6nsible.party of record on the permit. I understand that I may.protect
myself from Potential financial risk by hiring a licensed Contractor and having the permit filed in his or her name instead of my
own.
Contractors are required by law to be licensed and bonded in California'and to list their license numbers on
Penw•is and contracts. -
1 understand if I employ or otherwise
engage any persons, other than California licensed Contractors, and the total value
ofmr–yconstruction is at least five hundred dollars, ($500), including labor and materials, I' may be considered an "employer"
un tate and federal law.
I understand if I am considered an "employer" under state and federal law, I
must register.with the state. and federal
.government,, withhold payroll -taxes, provide workers' compensation disability insurance, and contribute to unemployment
compensation for each "employee'." I also understand 'my failure. to abide by these laws may subject me to serious financial
I understand under California Contractors' State License Law, an Owner -Builder who builds single-family residential
structures cannot -legally build them with the .intent' to offer them for sale, unless all work is performed by licensed
subcontractors and the number of structures does not exceed four within any calendar year, or all 'of the work is performed
under contract with a licensed, general bililding Contractor.
8. I understand as. an Owner -wilder if I.sell the property for which this permit is 'issued, I may be held liable for any
financial or personal: 4aries wed by any subsequent owners) that result from any latent construction defects in the
w hip or materials.
9. I understand I may obtain more information regarding my obligations as an ''employee ' from the. lntterad It eVenue
Service, the United States Small Business. Administration, the California Department of Benefit Payments, and the California
Division of Industrial Accidents. I also understand I may contact the California Contractors' State License Board (CSLM at 1-
80 -3 -CSLB (2752) or www.csib.ca.gov for more information about licensed contractors.
0. I am aware of and consent to an. Owner -Builder building permit *applied for in my name, and understand that I am the
party legally and financially responsible . for:. proposed construction . activity at the following address:
hci I agree that, as The party legally and. financially. responsible for tris proposed construction activity, I will abide by all
applicable 1'iws and requirements that govern Owner=builders as well as employers.
gave
.1 agree to notify the issuer of this, form immediately of any additions; deletions, or changes to any of the information I
ovided on this form Licensed contractors are .regulated by laws designed to protect the public. If year contract With
-someone who does not have a license,. the Contractors' State License Board may be unable to. assist you with any financial loss
you may sustain as a result of a complaint. Your only remedy against unlicensed Contractors may be in'civil court: It is- also
,important for -you to. understand that if an unlicensed.Contractor or employee of that individual or is injured while wvorking
on your property, you may be held liable for -damages. If you obtain a permit as Owner -Builder and wish to hire ConUactors,
-you -wtl be responsible for verifying whether or not :those Contractors are properly Licensed and the status of their workers'
compensation insurance coverage:
Before a building permit can be issued, this .form must be completed and signed -by the property owner and returned to
the agency responsible for issaitag,the permit. Note: A copy. of tfre property owner's Mver's 1&ensei form notad%advn3 or
other verification acceptable to the agency is."gired to be.presented when. the Pei.w t is issued to: verify the.proPerti'
owner's signature.
Signatuae of property owner • Date: a/ G®.
..Note: The following Authorization Form is required to be completed by the property owner only when design4ting
an agent of the property owner to apply for a construction permit for the Owner -Builder.
AUTHORIZATION OF AGFNTTO ACT ON. PROPERTY OWNER'S BEHALF
Excluding.the Notice to Property Owner, .the execution of which I understand is my personal responsibility, I hereby authorize
the following person(s) to act as. my neat(s) tb apply for, sign; and file the documents necessary to obtain an Owner -Builder
Permit foamy project
Scope of Construction Project (or Description of Work):
Project Location' or Address:
Name of Authorized Agent: Tel No
Address of Authorized Agent:
I declare under penalty of peejurythat I am the property owner for the address listed above and I personally felled out the above
information and certify its accuracy. Note: A copy of the owner's driver's Incense, form notarization,. or other verification
acceptable. to the agency is required to bepresented when the permit is issued to verify the property owner's signaWre..
Property Owner's Signature: Date:
EXISTING BEDROOM
#45 0 24` 11C,
I
EXIST. FDQTING
4" P C_G 2,006 P$I
11 28 DAYS OVER
COMPACTED 541E
T� SEE $Et;TIC-0V "A"
FOR FOOTING DETAIL 1
ik
FOUNDATION PLAN
718" STUC:CD
MATCH EXIST-)
7' - G" 3
EXIST, CQNST. NEW CONST.
LEFT SIDE ELEVATION
1/4" : I'-C)"
1 f2" CDX PLYWD W/700 NAILS
0 B' 4-C_ EDGES, 12" O-C. FIELD
2Tc6 #1 DF RAFTERS 9 24" O-C.
BUILT UP FIBERGLASS ROCFtNu
TO MATCH EXISTING ROOF
2 X B BLOCKING
26 GA FLASHING
2 X 8 FADIA
(MATCH EXIST)
U
1 /4" =
r
1
HALL EXIST CLOSET EXISTING CLOSET
EXISTING SMOKE ALARM
ABOVE DOOR
£X!STING BFUROOM
CEILJI3NG 11aj'.. -VARIES
7'3I' TO 811� 4
� cn
Z: J
I
EXiST, RECEPTACLE ? I Lc
E:{ISTIN{, LIVING RM ENTRY
cr' cn
� _4{0" FAIN, PLYYVU. V�
EXI5T. STQIIE �� " EX151. WIN❑GW5 TO BE REVOVEU: MALL PANEL
VENEEk 3 - 4372 GLA55 PANELS
r �
6080 AL SL G{ R � �i, I LO
>c
-40 U_FACT R/ .3. SHGC ~' w
-- — - - - EXIST. 5X}2 +�.-:.. r
I
ram, EXI'
L HAS
EXISTING CONCRETE l� u _
1YAiKf LANDING CEI�NC�17—V_ARlts
TO 7' 6' 3 a vL EXI!
HIGH CFFIQACY
FIXTURE - - _ 1'_
ol
,70 PHOTO
CELL
1_4,1
FLOOR PLAN
EXIST. CARPORT
I
I I
1 /4" n 1'0"
- EX15.T. STONE VENEER
c�
z
T
EXISTING BEDROOM 0
sn cn
w
I
I.
I
ROOF HAS
OVERHANG
CONCRE.TE WALK
a
i+
I
BODE PLAN
T /4- = TV
EXIST, STONE VENEER
y % f
EXIST, WINDOWS
L 15TING WIN[
F.F. I
A,-
EXIST WALK/LANDING E7{15T WALKANDINC
(F,IST AT WINdC)1h FILL IMIATGH EXIST,
EXIST. CONST. NEW CONST-
FRUNT ELEVATION
H 1 /4" = 1' - 0'
NEW CONSTRUC-PON d EXISTING CONSTRUCTION
6" MIN.
6,1 5-016 NAILS
VI N. 1,12 EX151
} 12 MATCH IEL V l ��
++ r
EXISTING ROOF STRU
1/2' :;YPSUM SD ?� (PIZGTECTj
_ 2X4 BLOCKING
R19: INSUI-ATION
EXIST. 4 X 12 HEADER
RAFTER TIE
H 2:.5 EA RAFTER
2K& ;OUBLE PLATE EXIST. BEDROOM
�- ' /2" ""YPSUM BOARD
' - 2X .DLK'G 0 `w IDWALL
2X6 STUDS 24" O.C. I
- R17 INSULATION �— EXIST WOOL! FRAME A
W/ EXTERIOR STONE EVE
7/$" STUCCO OVER 15# FELT
& ME.TAL LATH REMOVE EXIST VENL�R
3/d' CDX PLY WD. NAILED W/ APPLY 1/2" GYPSUM 8(
STUCCO SCREED w/ WEEP Sd'Wj5 ,0 4'� O.C, EDGES &
HOLES 2$ CA GLAVANr2Lp 12a C FIELD
2Xe -IT D.F. MUD SILL
10
T I= .. a EXI'S7. GROUND
I —4_� P�t-G�%_00R
112" X 10" STEEL A- BOLTS —I I 1—f — V1SflUEEN
I I—III1 I t l I- 'I p l—III—I
,MIN. CIA,) W/ NUT 0 4$-
O.C. AND W17HIN 12' OF
12" SPLICES AND CORNERS,
7" EMBED, W/ 3X3 PLATE
WASHER -229 THICK VIN.
2-#4 BARS CONT,
1/,2- = 1,a"
LEGEND:
REMOVE EXIST WINDOW AND FRAME ON OPFNING
NEW WOOD FRAIMIE AND STUCCO WALL
NEW STUCCO
NEW FACIA
2X8 FACIA -
(MATCH EXIST,)
7/8' STUCCO
(MATCH EXIST.)
+ •.aAPA
N-1,
I
' =
!7 I
cal:
lI
+
I ~
I
15' 24' 2S 4D'
:2 E� ,
! J
GARAGE �� EKSTING HOUSE a-
z
HNISH FLOOR OF
Lu EXIST. RES{DENCE = ma oo' ap
GARAGE CURS r
EEv, FINISH FLOOR O I F-
CARPgI T ADD ON t toa_m, NEW ADDITION
IEXIST WALK CNI
JL
1
cv
I _ J
PL
EXIST. SIDEWALKEXISTINGx+STING EXEI;T, SIDEWALK
DRIVEWAYRIVEWAY
EXIST, 'CURB
o,
.4082 AVENIDA BERMUDAS
SITE P._Af
12 -
Exs yG WINDOW
L
E)OSTING STUCCO
F. F, ` F F
7' - O" i .3' (EXIST)
NEW CONST. E iST,
RIGHT ODE ELEVATION
1/41,
'AN ADEQUATELY Sf2ED DEWS CD",'TAINFR
1S REOUIRED ON THEJOR SITE PIRING AZL
1" = 2Q'
PHASES DF CONSTRUCTION AND MUST Rf
CONSTRUCTION 110U .S
EMPTIED AS NECESSARY F'AIWRE TD DD Sri
Octalvr l st - April 30
MAY CAUSET THE CITY To N+ VAT E ('ONTAI�lFq
Alonday - Friday: 7:00 a.m. to 5-30 p-m.
DUMPED AT THE IXEE,'4SE OF THE {JW.NFRI
Saturday- 8:00 axL to 5:00 pm.
f.GNTRACTOR "
11tlndli4: forte
(;overiunent Cod e Holl days: None
A RE-WPECTtoij nE " 13
May Ist - 8epfember 30th
A i. krd.1q =1'riday: :00 a.m, toj�7:00 p-nL
�•e }�{�� j�$��; ��/�yj//��',.[
WI� VE 4..+ KFO IF�
��jj
.3I 1 4l ait a (7:00 +1+01w to 5:00 pmu
Pt-ANS AND 109 GIRO ARE NOT ON
�} .Il.ck: Nune
THE SITE FOR A SONEMEN
aI,t,�nt Code I lul 1 da vs: None
NO ccomi"
Dons'. &!or IS NOT PERM,TrEn
TOTE.
1, THIS PRo rECT 15 PwposEO TO MEET THE REQUIREMENTS OF CIRC 2308
FOR CONVENT10NA'. LIGHT -FRAME CONSTRUCTiDN.
2. ALL CONSTRUCTION SHALL COMPLY WITH THE 2007 CALIFORNIA BUILDING, ME4HANICAL, ELECTRICAL,
PLLIEMI$ING, AND 20D8 ENERGY CODES AND THE L.4 QLIINTA MUNICIPAL CODE-
3. RCUF ASSEMBLY SHALL HAVE A CLASS "A" FIRE RATING.
.4, FOUNDATION PLATES OR SELLS SHALL BE BOLTED OR ANCHORED TO THE FD; NDATION W17H A MIN1Wum O�
TWO BOLTS OR ANCHOR STRAPS PEA PIECE, WITH ONE BGLT LOCATED NDT MORE THAN 12 INCHES NOR
LESS THAN 4 INCHES FROM THE END OF EACH PIECE.
5OR
f
�u
on the folio-muing Code Holidays:
Now Year`$ Day
Dr. Martin lu4her KigJr. Day
President's Day
Mer octal Day
Indepaj,duce Day
Labor Day
Veteran's nay
Thanhoving Day
Christmas Day
E;' r-
FEB 08 2011
BY-- it
136"2. x 15 (F
CR E V I S I G N S
LLJ
0
_j
u
d
rIf
tif
J
jr
D
w
r
W
.0
<
L
w
J
d
w
a
�
J
Q
01
c,
¢
D
4
M
I�
J
a
J
L1J
<
—
IY
U
U1
LLJ
o
m
n
co
La
OL
L0
Elf
�
❑.
0
r-
__J
<
WIM
Lo
T
x
V}
LL}
Lf)
1
kn
N
't
=J
_j
Q
n
OWNER PLAN PREPARED:
5AKAMOTO/ LEE
54-0a2 AVENIDA BERMUDAS
LA QUINTA, CA 9225.E
(760) 564-3861
DATE
4/12 /10
REVISED:
12/29/10
SHEET
OF SHEETS
h
a
L _