10-0590 (SOL)t�
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number:10c0000059�
Property Address: 78665 CABRILLO WY
APN: 646-420-027- - -
Application description: SOLAR
Property Zoning: LOW DENSITY RESIDENTIAL a.
Application valuation: 3500
Applicant:
Til`!t 4 4 Qum&
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Architect or Engineer: - �-
N /P
---------------------------------------------------
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Pfessionals Code, nd my License is in full force and effect.
License Class: C46 Licens o.: 499505
Date: _� tractor: �—
i OWNER -BUILDER DECLARATION
hereby affirm under penalty oflury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars (5500).:
(_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ I I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
(_ 1 I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERA1IT
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 7/01/10
Owner:
MASTER ASSN FOR RANCHO
LA.QUIN
79325 RANCHO LA QUINT
LA QUINTA, CA 92253
n
U
p
t
�
3JL 0 U
2010
_-Contractor.
ENERGY SERVICES
i_AC.Wl4ilI7A
440 S. EL CIELO ROAD,
#339F.
C���n
PALM SPRINGS, CA 92262
(760)778-1054
Lic. No.: 499505
-------- - ---------
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier EXEMPT Policy Number EXEMPT
I c=at, in the performance of the work for which this rr is issued, I shall not employ any
person in any manner so as to become subject to the ers' compensation laws of California,
and agree that, if I should become bject to the work S.
compensation provisions of Section
3700 of the Labor Code, I s I thwith comp w' those provisions.
v
pplicant:77
WARNING: FAILURE TO SECE OR
URKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO MINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. gree to comply with all
city and county ordinances and state laws relating to building consty%tion, and hereb_ y uthorize representatives
of thi county to enter upon th above -men tioned property fy in ��ection purposes.
11 a��� ' nature (Applicant or Agent):
�. A
4
S
LQPERMIT
Application Number . . . . . 10-00000590
Permit . . . ELEC-MISCELLANEOUS
Additional desc .
Permit Fee . . . 15.75 Plan Check Fee
3.94
Issue Date . . . . Valuation . . .
. 0
Expiration Date 12/28/10
Qty Unit Charge Per
Extension
BASE FEE
15.00
1.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20
----------------------------------------------------------------------------
.75
PermitSOLAR PERMIT
PERMIT..
�. .----•- --Additional desc-'.- :--------
Permit Fee . . . . 19.50 Plan Check Fee
4.88
Issue Date . . Valuation . . .
. 3500
Expiration Date 12/28/10
Qty Unit Charge Per
Extension
1 BASE FEE
15.00
1.00 4.5000 EA SOLAR COLLECTOR < 1000
4.50
- ---------------------------------------- -----------------------------------
Special Notes and Comments
SOLAR POOL WATER HEATING SYSTEM - 40SF
COLLECTOR, ELECTRICAL CONTROL AND PIPING
TO EXISTING POOL PLUMBING. THIS PERMIT
DOES NOT INCLUDE ADDITIONAL OR
ALTERATION TO EXISTING POOL PUMP. 2007
CALIFORNIA BUILDING CODES.
July 1, 2010 12:14:45 PM AORTEGA
----------------------------------------------------------------------------
Other Fees . . . . . . . . . BLDG STDS ADMIN (SB1473)
1.00
Fee summary Charged Paid Credited
----------------------------------------
Due
-----------------
Permit Fee Total 35.25 .00 .00
35.25
Plan Check Total 8.82 .00 .00
8.82
Other Fee Total 1.00 .00 .00
1.00
Grand Total 45.07 .00 .00
45.07
G�LDLIN(tOr�U_D k� 00
CONTROLS INC.
The Recognized Technology Leader A��
1-
i.
AQUA SO LAR
Total solar system control with digital display of pool
temperature and solar system temperature. Plus, full
system diagnostic LED's. The Ag0a Solar is set by a
single dial adjustment for desired pool temperature. The
Aqua Solar offers selectable high limit, prograinmable
recirculation freeze protection and nocturnal cooling to
customize any installation.
AQUoLAr-"T C
Y
The Aqua Solar Time;,Clock Model has all the features of the
Aqua Solar with time clock:foF control of the swimming pools
main filter pump. The time clock is,programmable in 15
minute increments and can; have- .h' .01tiple ON/OFF times.
Exclusive solaF,override feature allows for maximizing solar
gain while minimizing electricity cost. True automation and
convenience....
Cil%W493lD_I
MAI
America's best selling solar control is designed for easy and depend-
able operation. The microprocessor based technology ensures reli-
ablity and accurate performance. The GL -235 offers advanced
features to provide differential temperature control, selectable high
limit, programmable recirculation freeze protection, nocturnal cooling
and optional booster pump control. The GL -235 can handle all
systems; old or new, pools & spas, 12 or 24VAC actuators.
All products are covered by Gold:',)E3 : exclusive 5 year limited warranty*.
WE
*see warranty statement for details
Actuator, diverter valve and 2 temperature
sensors are included in all Goldline Solar Comb
Goldline Controls is the leading supplier of solai
controls nationwide. Goldline also manufacture:
the Aqua Rite Electronic Chlorine Generator. Tt
Aqua Rite makes it's own chlorine from table sa
and keeps your pool's water sparkling. Ask your
pool professional about America's best selling
chlorine generator, the Aqua Rite.
U�
flflTN I�[. EMPIRE SERIES SPECIFICATIONS
78 1/4
3 1/4
19.70
17.30
60
0.60
0.51
.015
12
160
393/4
1 73 112
PEE
36 1/8 '
98 1/4
3 1/4
24.61
�
80
0.78
0.62
.017
e
160
393/4
c�'° _2 a a, cp'rei Q h � � ��, y �,'u ,o
C t2� � cri 2 v °' v p'^ O- � tT C7
t.,J�6 � �. S O S � �'", H � D y.
c c�
p1 °,
O�
� .g, &
��, �,
Oa. Q�
lJ
y.
��,p
� .c �
�O ;°
.S C �'
� S
D •
s c
Qi• '�
D'
�•
2 ¢i
1.00
=y Q�
�,�
4`,
4
160
o
cD'
�¢,=pF
�m ��C`
so
122 1/4
3 1/4
40.81
37.33
141
1.20
1.04
o
12
Ix
X
MODEL EC
THERMAL PERFORMANCE RATINGS*
36 1/8
78 1/4
3 1/4
19.70
17.30
60
0.60
0.51
.015
12
160
393/4
1 73 112
PEE
36 1/8 '
98 1/4
3 1/4
24.61
21.88
80
0.78
0.62
.017
12
160
393/4
1 93 5/8
48 1/8
98 1 /4
3 1/4
32.79
29.81
106
1.00
0.83
.018
12
160
51 3/8
1 93 5/8 i
48 1/8
122 1/4
3 1/4
40.81
37.33
141
1.20
1.04
.020
12
160
51 3/8
1 115 5/8
MODEL EC
THERMAL PERFORMANCE RATINGS*
MODEL EP
Btu/ft2/Da
Category
(Ti -Tal
T = inlet fluid temp
Ta=amtHentair temp
CLEAR
DAY
2000
Btu/ft2/Day
MILDLY
CLOUDY DAY
1 500
Btu/ft2/Day
CLOUDY
DAY
1000
Btu/ft2/Day
A -9°F ----
1,332
1,005 _
6_80
B(9°F)
1,218
1 890
565
C36°F
I,U40 __
720
372
D(90°F)
699
_
1 405
_ _402
127
E 144°F)_ _ _
'. 390
137
MODEL EP
A -Pool Heating (Warm Climate) B -Pool Heating C -Water Heating (Warm Climate) D -Water Heating (Cool Climate) E -Air Conditioning/Industrial Process Heat.
Thermal performance is obtained by multiplying the collector output for the appropriate application and insolation level by the total gross collector area.
*Collector ratings are derived from the Solar Rating & Certification Corp (SRCC) Document RM -1 and Standard OG -100.
ENGINEERING SPECIFICATIONS (Performance specifications subject to testing error of+/- 3%)
The following shall be the specifications for the solar collectors. Collectors
shall be SunEarth Empire model . and shall be of the glazed liq-
uid flat plate type. Collectors shall be tested in conformance with ASHRAE
93-1986, and SRCC 100-81. The collectors also shall be certified by the
SRCC and the Florida Solar Energy Center (FSEC(.
GENERAL
The dimensions of the collector shall be inches in length,
inches in width and 3 1/4 inches in depth. The collector casing
shall be an anodized aluminum extrusion (alloy 6063 T5), minimum thick-
ness .060 inch, with an architectural dark bronze finish. The casing shall
have notched framewalls for ease of plate removal and reinstallation. Sheet
metal screwed fasteners shall be stainless steel (18-8 #10). The backsheet
shall be painted textured aluminum not less than .014 inch thickness. A 1
inch vent plug shall be installed in each of the four corners of the backsheet
to minimize condensation.
GLAZING
The collector glazing shall be one sheet of low iron tempered glass, with
a minimum of 1/8 inch thickness (5/32 inch on EP/EC 40), and a mini-
mum transmissivity of 91 percent (89 on EP/EC 40). The glazing shall be
thermally isolated from the casing by a continuous EPDM gasket. There
shall be a continuous secondary silicone seal between the glass and cas-
ing capstrip to minimize moisture from entering the casing.
INSULATION
The insulation shall be foil -faced polyisocyanurate foam sheathing board of
a minimum 1 inch thickness, siliconed in place to the aluminum backsheet,
covered by low -binder fiberglass of a minimum 1 inch thickness, providing
to change without notice. t`
MANUFACTURED BY: I AVAILABLE FROM:
SU�EflBtNio�.
4315 Santa Ana St. • Ontario, CA 91761
(909)605.5610 • Fox (909)605.5613
thermal isolation of the foam from the absorber plate. Total thermal resis-
tance shall be a minimum of R-12. The sides and ends of the collector shall
be insulated with a minimum off inch foil -faced polyisocyanurate foam
sheathing board.
ABSORBER PLATE AND PIPING
The absorber shall consist of a roll -formed copper plate of no less than .008
inch thickness. Risers shall be a minimum of 1/2 inch O.D. Type ..'M
tubing on no more than 4 112 inch centers continuously soldered t rtf>z.
plate utilizing a norkorrosive solder paste with a melting point of 460OF'
The risers shall be brazed to 1 1/8 inch 0. D. Type M copper manifolds uti-
lizing a copper phosphorous brazing alloy with no less than I �;tper ent sil-
ver content, and conforming to the American Welding Society's clas-
sification. EPDM grommets shall isolate the manifold from the ahfom IT
casing. The absorber plate shall be designed for 160 psig maximum pper-
ating pressure.
ABSORBER COATING AND PERFORMANCE CURVE
A) Black Chrome (EC Series;: The absorber coating shall be black chrome on
nickel with a minimum absorptivity of 95 percent and a maximum emissiv-
ity of 12 percent. The instantaneous efficiency of the collector shall be a
minimum Y -intercept of 0.714 and a slope of no less than -0.7271
(BTU/ftz—hr)/F.
B) Moderately Selective Black Paint (EP Series(: The absorber coating shall be
a moderately -selective black paint with a minimum absorptivity of 94 per-
cent and a maximum emissivity of 56 percent. The instantaneous efficiency
of the collector shall have a minimum Y -intercept of 0.682 and a slope of
no less than -0.7995 (BTU/ftz—hr)/F.
Cn
'~c
(D
0)
RECYCLED PAPER—SOY BASED INK
Btu/ft2/Da
Category
(Ti -Tal
n - inlet fluid temp
Ta = ambient air temp
CLEAR
DAY
2000
Btu/ft2/Day
MILDLY
CLOUDY DAY
1 500
Btu/ft2/Day
CLOUDY
DAY
1000
Btu/ftz/Day
A -9°F ----
- 1,284
971 _
659
8(9*Fl
1,169
1 854
542
C 36°F.
984
677
372
_ _ _
D 90°F
_
619
1 343
89
E 144°F
' 280
62
A -Pool Heating (Warm Climate) B -Pool Heating C -Water Heating (Warm Climate) D -Water Heating (Cool Climate) E -Air Conditioning/Industrial Process Heat.
Thermal performance is obtained by multiplying the collector output for the appropriate application and insolation level by the total gross collector area.
*Collector ratings are derived from the Solar Rating & Certification Corp (SRCC) Document RM -1 and Standard OG -100.
ENGINEERING SPECIFICATIONS (Performance specifications subject to testing error of+/- 3%)
The following shall be the specifications for the solar collectors. Collectors
shall be SunEarth Empire model . and shall be of the glazed liq-
uid flat plate type. Collectors shall be tested in conformance with ASHRAE
93-1986, and SRCC 100-81. The collectors also shall be certified by the
SRCC and the Florida Solar Energy Center (FSEC(.
GENERAL
The dimensions of the collector shall be inches in length,
inches in width and 3 1/4 inches in depth. The collector casing
shall be an anodized aluminum extrusion (alloy 6063 T5), minimum thick-
ness .060 inch, with an architectural dark bronze finish. The casing shall
have notched framewalls for ease of plate removal and reinstallation. Sheet
metal screwed fasteners shall be stainless steel (18-8 #10). The backsheet
shall be painted textured aluminum not less than .014 inch thickness. A 1
inch vent plug shall be installed in each of the four corners of the backsheet
to minimize condensation.
GLAZING
The collector glazing shall be one sheet of low iron tempered glass, with
a minimum of 1/8 inch thickness (5/32 inch on EP/EC 40), and a mini-
mum transmissivity of 91 percent (89 on EP/EC 40). The glazing shall be
thermally isolated from the casing by a continuous EPDM gasket. There
shall be a continuous secondary silicone seal between the glass and cas-
ing capstrip to minimize moisture from entering the casing.
INSULATION
The insulation shall be foil -faced polyisocyanurate foam sheathing board of
a minimum 1 inch thickness, siliconed in place to the aluminum backsheet,
covered by low -binder fiberglass of a minimum 1 inch thickness, providing
to change without notice. t`
MANUFACTURED BY: I AVAILABLE FROM:
SU�EflBtNio�.
4315 Santa Ana St. • Ontario, CA 91761
(909)605.5610 • Fox (909)605.5613
thermal isolation of the foam from the absorber plate. Total thermal resis-
tance shall be a minimum of R-12. The sides and ends of the collector shall
be insulated with a minimum off inch foil -faced polyisocyanurate foam
sheathing board.
ABSORBER PLATE AND PIPING
The absorber shall consist of a roll -formed copper plate of no less than .008
inch thickness. Risers shall be a minimum of 1/2 inch O.D. Type ..'M
tubing on no more than 4 112 inch centers continuously soldered t rtf>z.
plate utilizing a norkorrosive solder paste with a melting point of 460OF'
The risers shall be brazed to 1 1/8 inch 0. D. Type M copper manifolds uti-
lizing a copper phosphorous brazing alloy with no less than I �;tper ent sil-
ver content, and conforming to the American Welding Society's clas-
sification. EPDM grommets shall isolate the manifold from the ahfom IT
casing. The absorber plate shall be designed for 160 psig maximum pper-
ating pressure.
ABSORBER COATING AND PERFORMANCE CURVE
A) Black Chrome (EC Series;: The absorber coating shall be black chrome on
nickel with a minimum absorptivity of 95 percent and a maximum emissiv-
ity of 12 percent. The instantaneous efficiency of the collector shall be a
minimum Y -intercept of 0.714 and a slope of no less than -0.7271
(BTU/ftz—hr)/F.
B) Moderately Selective Black Paint (EP Series(: The absorber coating shall be
a moderately -selective black paint with a minimum absorptivity of 94 per-
cent and a maximum emissivity of 56 percent. The instantaneous efficiency
of the collector shall have a minimum Y -intercept of 0.682 and a slope of
no less than -0.7995 (BTU/ftz—hr)/F.
Cn
'~c
(D
0)
RECYCLED PAPER—SOY BASED INK
WNW
VACUUM RELIEF VALVE � L
SOLAR COLLE(
SOLAR SENSOR �
FVAC.'UJUMA. RELIEF VALVE
4o4xkx%w socat s END CAP
INLET UNE TO
1 SOLAR COLLECTC' OUTLET LINE _4<
FLOW
ELEC T RO'NiC CONTROL t� ': HRMOMETERIF L
taaiiar-ast
VALVE
.f-
Ct7�ITROL ' ISOLATION CHECK VALHI
12=240 V LIME ISOLATION OUTLE 1 TEE
ti
BALL
VALVE
FILTER I-
3 -AY VALVECHECK
V
ACVE
s t I y� CITY OF LA QUINTA
HEAT BUILDING & SAFETY DEPT.
FOR Ge UCTION
HF__cci+�0A+3ETEFi POOL:3Wse�dt DATE
l�• o5q� �Iow�. ����
�6• low �"�
7
HEATER BY-PASS
BALL VALVE
T1
F#EATER
j{{
HEATED WATER
i
TO Y". -'.--OL
4
Bin # City of La Quinta
Building 8r Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Shee',,4
Project Address: '7 z-lt, �jv�, k,+ qv,� Owner's Name: AoFt.C�ij j.VJ �V�A/�AA4
A. P. Number: 1�'i
iA9R
Address: '7 2 75 3w� �Legal
Descriptioon:
City, ST, Zip: L -pr Q,/,'"i�
Telephone:>•><
:�✓�Contractor:
.'
Address: 716-- 3 3 5
Project Description:
City, ST, Zip: Pfil,44 r.� S' �itif zoo Z
s
Telephone:3txr''
7O/ O ^ 779 /D
JM1{
;`s.;::w.;>.i?>%:x:::?.`'�
State Lic. # 05-
City Lie.
Arch., Engr., Designer.
Address:
City, ST, Zip:
Telephone:
¢j
`'`$ ' ' '
Construction Type: Occupancy:
State Lic. #:
Project type (circle one): New Add'n Alter Repair Demo
Name of Contact Person: J N 5 i4N
Sq. FL:
#Stories: _T#
Units
Telephone # of Contact Person: -(pp ^ 77/e>—a�j
Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS LINE
4
Submittal
Req'd
Recd
TRACKING PERMIT FEES
Plan Sets
Plan Check submitted Item Amount
Structural Cala.
Reviewed, ready for corrections Plan Check Deposit
Truss Cala.
Called Contact Person Plan Check Balance
Title 24 Cates.
Plans picked up Construction
Flood plain plan
Plans resubmitted Mechanical
Grading plan
2" Review, ready for corrections/issueElectrical
Subcontactor List
Called Contact Person Plumbing
Grant Deed
Plans picked up S.M.I.
H.O.A. Approval
Plans resubmitted Grading
IN HOUSE:-
3" Review, ready for corrections/issue Developer Impact Fee
Planning Approval
Called Contact Person I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
1,.1,Iw- kAof .To I%Lt e