12-0932 (MECH)IM
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: 12-00000932
Property Address: 49690 RANCHO SAN JULIAN
APN: 649=610-011-11 -28964
Application description: MECHANICAL
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 14000
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Owner:
SWANK WILLIAM
49690 RANCHO SAN JULIAN �`r
FD
LA QUINTA, CA 92253
Contractor:
Applicant: Archite or Fp ESSER AIR . CONDITIONING &
P.O. BOX 1636
CATHEDRAL CITY, CA 92235
(760)324-0550
Lic. No.: 489046
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury -that I am licensed under provisions of Chapter 9 (commencing with
'Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
License Class: C20 �'/ LicenseNo.: 489046
Date: y� �iZ Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statementthat he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
1 _ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
.. (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves theieon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
I—) I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address: '
LQPERMIT
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 177-7153
Date: 8/16/12
AUG 1 r. 2012 �
CIT:' OF IA QUINTA
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by'Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier CASTLEPOINT NTL Policy Number WSLTHPE90140302
I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the workers' compensation provisions of Section
3700 of the Labor Code, I shall f rthwith comply with those provisions.
� �- A
Date: �pelican[:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the .
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request.and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the ownei, and the applicant, each agrees to, and shall defend, indemnity and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county ordinances and state laws relating to building construction, and hereby authorize representatives
of this county to enter upon the above-mentioned property for insp purposes.
Date: �/ 'I Z' Signature (Applicant or Agent):
Application Number . . . . . 12-00000932
Permit MECHANICAL
Additional desc .
Permit Fee . . . . 66.00
Plan Check Fee
16.50
Issue Date . . . .
Valuation
0
Expiration Date 2/12/13
Qty Unit Charge Per
Extension
BASE
FEE
15.00
2'.00- 9.0000 EA MECH
FURNACE <=100K
18.00
2.00 16.5000 EA MECH
B/C >3-15HP/>100K-500KBTU
33.00
Special Notes and Comments
------------
REPLACE (2) EXISTING 5 TON SPLIT
SYSTEMS
WITH.(2) 14 SEER 5 TON SPLIT SYSTEMS
2010.CODES.
----------------------- -----------------------------------------
Other Fees . . ... . . . . BLDG STDS ADMIN (SB1473)
1.00
Fee summary Charged
Paid Credited
Due
----------------- --- ------ ----------
Permit Fee Total 66.00
---------- ----------
.00 .00
66.00
Plan Check Total 16.50
.00 00
16.50
_. Other Fee Total 1.00
.00 .00
1.00
Grand Total 83.50
.00 .00
83.50
LQPERMIT
—Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Pae 1 of 5
Project Name: Climate Zone # # of Stories
Swank, William system 2 115 1
General Information
Site Address: 49690 Rancho San Julian La Quinta CA 92253
Enforcement Agency: La Quinta, City of Date: 8/15/2012
Building Type p Single Family ❑ Multi Family
Circle the Front Orientation: N, E,(Sk W, or degrees
Conditioned Floor Area (CFA): 2200
Project Type: E] Alterations ❑ Envelope U Fenestration ❑ Roof ❑ HVAC
$
Cell Value U -factor
Replacement or Change Out ❑ Duct Replacement ❑ Water Heater
NOTE: This form is not to be used for Newly Constructed Buildings or Additions
Insulation Values For Opaque Surfaces (for Furring use the Mass and Furring Strips Construction table below)
Assembly Alteration
❑ Opening of framed cavity alone—Alterations that involve the opening of the framed cavity of a wall, ceiling, or floor must install the
mandatory minimum insulation value per §150 for the altered assembly. Fill in Columns A —C and enter mandatory insulation value in Column H.
❑ Replacement of entire assembly— Replacement of an entire wall, ceiling,
or floor assembly requires the installation of Component
Package- D insulation values in Table 151-C. Fill in Columns A —J.
Opaque Surface Details For the furred portioned of Mass Walls see Furring Strips Construction Table below.
A B D E F G H 1 J
e
Proposed tie ode Standard Values From JA4
Table
Framing . T i kness, » Framed Continuous
AsseomTQuIl I
ftu.
JA4 Proposed
Assembly Assembly
ID' dt c o -
I e a e
$
Cell Value U -factor
Walls From Reference
in Furring Space from Reference
Joint Appendix Table 4.3.5, 4.3.6, 4.3.7
Joint Appendix Table 4.3.13
Note: Forfiirred assemblies, dcc�onnting f3i C —"* u yr,T'ea+ ages V3 alculating fiored walls use the Mass and
F irrin Construction table below:"
1. For Tag/1D indicate"I idenlrfrCdttoi nd at it n plan �
2. Indicate the Assembly Name or type:Ro�eilin SIA
haFrame'type
r� a vl S oors ndica and Size: For
Wood, Metal, Metal Buildings, Mass, en 2x9 ort See;JAfor�other assemblies.
3. Enter the thickness for mass in inches or pacing be titin fr ming- emb s timer; ; or Otherjfor all }other assembly description
such as Concrete Sandwich Panel,
Spandrel Panel, Logs,St $p! Panel and etc....ZC ,.
4. Based on the Climate Zone; Standard
enter the U factor from Tabte 151-8, C or D for each differe�16,sembly-Namt e -or -type.
5. Enter the Table number that closely resembles the proposed assembly.
6. Enter the R -value that is being installed in the wall cavity or between the framing: otherwise, enter
7. Enter the Continuous Insulation R -value for the proposed assembly; otherwise, enter "0 ".
8. Enter the row and column of the U factor value based on Column F Table Number and enter the Assembly U factor in Column J
9. The Proposed Assembly U factor, Column J, must be equal to or less than the Standard Ufaclor in Column E to comply.
Furring Stri s Construction Table for Mass Walls Onl
A B C I D I E
F I G I H 1 J I K
L
M
Proposed Properties of Masonry and Concrete
Added Interior or Exterior Insulation
Walls From Reference
in Furring Space from Reference
Joint Appendix Table 4.3.5, 4.3.6, 4.3.7
Joint Appendix Table 4.3.13
_
N _
Assembly
y
o O C U G L e�tl H
`o .3 F t'— o m ;, a > ^„
'
Final
Mass
Thickness
Name or JA4 Table
T ez Number
¢ > d
0 °' -0 r °'
v °' ' °o t ; v ' A
c x c '
Assembly
¢ >
U-factor6.1
Comment
Registration Number: 312-A0012666A-000000000-0000
2008 Residential Compliance Forms
Registration Date/Time: 08/15/2012 13:06:07 HERS Provider: CBPCA
August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Page 2 of 5
Project Name: Climate Zone # # of Stories
Swank, William system 2 115 1
1. Indicate the type of assembly to include; Hollow Unit Masonry Walls, Solid Unit Masonry, Solid Concrete Walls, Etc. Additional assemblies can
be found Reference Joint Appendix JA4.
2. This is the U -Factor based on the thickness of the assembly in inches.
3. The R -value of the insulation to be added on the interior or exterior of the assembly.
4. The Calculated R- Value is the R -value of the furred out section of the assembly.
-6. The Final Assembly is calculated using Equation 4-2 or Equation 4-4of the Reference Joint Appendix JA4. The equation is the inverse of Column
added to Column L Column K is the inverse from column J.
7. Insert the calculated U- actor value on to the Opaque Sur ace Details in Column J
FENESTRATION PROPOSED AREAS
❑ Replacing window alone — Replacement windows shall meet the U -Factor and SHGC Value requirements of Component Package D in
Table 151-C. The Total Fenestration and West facing Area requirements are not applicable.
❑ Adding 50ft2 or less of window area — Newly installed windows shall meet the U -Factor and SHGC Value requirements of Component
Package D in Table 151-C.
❑ Adding more than 50ft2 of window area — Newly installed windows shall meet the U -Factor and SHGC Value and the Fenestration
Area requirements of Component Package D in Table 151-C. Complete the Altered Fenestration Allowed Area Table on Page 2 of the CF- IR -AL T
Fenestrat�trWU*,%1 i s i s
window, Glass,DoornrS li ht We
m NFRC or Default
°
outh, ft2
-I`actor2.3 SHGC; Values
Allowed
Existing
Fenestration
Total Area
MW
I. Fenestration area is the area of to[al g! drtxtuct: t.e.l �fains less,lhan SO%glass, [hefenestra[ion
0SIP
area may be the glass area plus a '2 inc fry [pr
2. Enter value from Component Package D Requiremenr sin Table 131 C. ]
3. Actual fenestration products installed and as indicated in CA, V Form shall be equivalent to or have Lower U factor and/or a lower
SHGC value than that specified on the CF -1 R ALT Form.,'`'
4. Submit a completed WS -3R Form if a reduced SHGC is calculated with exterior shading.
5.1fapplicable at this sta e enter "NFRC" or NFRC Certified windows or are CEC "Default" values ound in Table 116-A or B.
ALTERED FENESTRATION ALLOWED AREAS (Completeif more than 50ft'offenestration is added)
A
B
C
D
E
F
G
Allowed
Existing
Fenestration
Total Area
CFA of Entire
% of
Fenestration
Area
Fenestration
Allowed
Proposed Area'
Total Fenestration Area
Dwelling
CFA
Area
Removed
Area Added
(A x B)
E -D) + C
ft2)
.20
West Fenestration Area
(Required In
CZ's 2,4&7-15
.05
1. West Fenestration Area includes west -sloping skylights and any skylights with a pitch less than 1:12.
2. West facing glazing area removed cannot be "counted" twice. " In order to distribute the west glazing area removed to the other orientations,
input the west glazing area removed in the Total Fenestration Area row, column D.
3. Include the Proposed Area of the West facing fenestration in both Area columns below.
4. To meet compliance, the Proposed Area must be less than orequal to the Total Allowed Area for BOTH the Total and West Fenestration Areas.
Registration Number: 312-A0012666A-000000000-0000 8e istration Date/Time: 08/15/2012 13:06:07 CBPCA
g HERS Provider:
2008 Residential Compliance Forms August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Page 3 of 5
Project Name: Climate Zone # # of Stories
Swank, William system 2 15 1
ROOFING PRODUCTS (COOL ROOFS) §151(1)12
When the area of exterior roof surface to be replaced exceeds more than 50% of the existing roof area, or more than 1,000f?, whichever is
less, the new roofing area must meet the roofing product "Cool Roof 'requirements of§152(b)IHi, 152(b)IHii, or 152(b)IHiii.
Check applicable alternative or exception below if the roof alteration is exempt from the roofing product "Cool Roof' requirements. Note: If any
one of the alternatives or exception below is checked, the Aged Solar Reflectance and Thermal Emittance requirements for roofing products in
§l 18(i) are not applicable. Do not fill table below.
❑ Cool Roofs Not Required in Climate Zones 1-12, 14, and 16 with a Low Sloped. Less or 2:12 pitch.
❑Cool Roofs Not Required in Climate Zones 1 through 9 and 16 with a Steep -Sloped Roofs (pitch greater than 2:12) and product unit weight less
than 5lb/ft2.
Alternatives to §152(b)1 Hi and §152(b)Hii, Steep -slope roof (pitch > 2:12)
❑ Insulation with a thermal resistance of at least 0.85 hr- ft2-*FBtu or at least a 3/4 inch air -space is added to the roof deck
over an attic; or
❑ Existing ducts in the attic are insulated and sealed according to § 151(f)10; or
❑ In climate zones 10, 12 and 13, with 1 ftZ of free ventilation area of attic ventilation for every 150 ftZ of attic floor area, and
where at least 30 percent of the free ventilation area is within 2 feet vertical distance of the roof ridge; or
❑ Building has at least R-30 ceiling insulation; or
pf § 151(f)2❑ Building has n dtr' 1 t
❑ Building has ra ' WbW',r ' the attic nWeting requiMir
yw � r y.�
❑ In climate zones 10, L1,,13rand.14, R-3 o r r deck ins anon age vented attic. i� �y
on
Exception to§152(b1Hw'Low-shi�oo {pits �1�11i�r Ar7i
Association
❑ Building has n�ducts,in the `'✓
Other Exceptions
from the below Cool Roof criteria.
❑ Roofing area covered by building,integr ted> phot t�ie�ls anti 1 .thenma Mhm.the-beiow
❑ Roof constructions;thaf 1�4ve,theimaJ macss;4" vee; he to ith a l 2
�gembrade; 1 Cool Roof criteria.
iW li rformance A roach to ow tom liance, otherwise,
Note: If no CRRC- 11 label is available; this m`p1i ce m rCanr;J e use91100
Check thea licable bo bei`ow f Exerts fro�the E) eructs gol T{oo$ uire pp
Slope gg
' Produ`"'We. $ht
ged Sola °°
Thermal
CRRC Product ID Number
_ 2 4
it 51b/ft s� 5}b�/ft e#lectance
4
Emittance
SRI s
❑ ❑
�Qt
❑
❑
Shp✓
❑ ❑
❑
❑
❑4
❑ ❑
❑
❑
❑4
❑ ❑
❑
❑
❑4
1. The CRRC Product 1D Number can be obtained from the Cool Roof Rating Council's Rated Product Directory at ivivw,coolroofs ori/products/search phhe
2. Indicate slue type of product is being used for the roof top, i.e.
single -ply roof, asphalt roof, metal roof, etc.
3. 1f the Aged Reflectance is not available in the Cool Roof Rating Council's Rated Product Directory then use the Initial Reflectance value from the same
directory and use the equation (0.2+0.7(pi„i1i"1 _ 0,1) to obtain a calculated aged value. Where pis the Initial Solar Reflectance.
4. Check box if the Aged Reflectance is a calculated value using the equation above.
5. Calculate the SRI value by using the SRI- Worksheet at hap://www.enerev.ca.rov/title24/and enter the resulting value in the SRI Column above and attach atopy of
the SRI- Worksheet to the CF -I R.
—
To apply Liquid Field Applied Coatings, the coating must be applied across the entire roof surface and meet the dry mil thickness or coverage
recommended by the coatings manufacturer and meet
minimum performance requirements listed in § 118(1)4. Select the applicable coating:
❑ Aluminum -Pigmented Asphalt Roof Coating
❑ Cement -Based Roof Coating
❑ Other
Registration Number: 312-A0012666A-000000000-0000
2008 Residential Compliance Forms
Registration Date/Time: 08/15/201213:06:07 HERS Provider: CBPCA
August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Page 4 of 5
Project Name: Climate Zone # # of Stories
Swank, William system 2 15 1
HVAC SYSTEMS - HEATING
Minimum
Duct or Piping
Configuration
Heating Equipment
1.2•'
Type
Efficiency
Distribution
Insulation
Thermostat
(Central, Split,
and Capacity
AFUE or HSPF 'Type
and Location
R -Value
Type
Space, Package or H dronic
Furnace, 44000
80 AFUE
Ducted,
SetBack
Split
1. Indicate Heating Type (Central Furnace, Wall Furnace, Heat pump, Boiler, Electric Resistance, etc.)
2. Electric resistance heating is allowed only in Component Package C, or except where electric heating is supplemental (i.e., if total capacity
< 2 KW or 7,000 Btu/hr electric heating is controlled by a time -limiting device not exceeding 30 minutes). See §151(6)3 exception.
3. Refer to the HERS Verification section on Page 4 of the CF -/R -AL T Form for additional requirements and check applicable boxes.
4. Indicate Type or Location (Ducts, Hydronic in Floor, Radiators, etc.)
HVAC SYSTEMS - COOLING
Minimum
Cooling Equipment
Efficiency Duct or Piping
(SEER/EER or Distribution Insulation Thermostat
Configuration
(Central, Split,
Type and Capacity 1-z
COP) Type and Location' R -Value Type
Space, Package or H dronic
AirConditioner, 00
14 SEFj� pct SetBack
Split
1. Indicate Cooling Typo-(A7C, Hedt pimp, o tc {�» �a •
2. Refer to the HERS fer cation section o a � nac ti i! oxes.
3. Indicate T e or Location Ducts,:H ron c in ,loon_ Radiators, etc.)
i 11 t
WATER HEA'T'ING• J
List water heaters atid�:bo__ilersfor both do tic t Ovate hed11 rs an 'hydt`on .pace heating. Individual dwelling.DHW heaters must be
gas or propane fired, antimay,not exceed a Ho a er Pipe ' sulati nfront DHW h t #d#Stt- chen(q) and all underground
hot water pipes is required in all com one ; c esri' II imate wne .
External Tank
Water HeatereType/Fuel Distribution Type ; ' umber n EneFgy Factor or Insulation
(Standard, Recirculatin )Z
System Capacity (al) 'i Thermal -Efficiency R -Value'
L Indicate Type (Storage Gas, Heat Pump, Instantaneous, etc.)
2. Recirculating systems serving multiple dwelling units shall meet the recirculation requirements of §150(n). The Prescriptive requirements do
not allow the installation of a recirculating water heating system for single dwelling units.
3. The external water heating tank and i es shall be insulated to meet the requirements o 150 ).
SPECIAL FEATURES The enforcement agency should pay special attention to the Special Features specified in this checklist below.
These items may require written justification and documentation andspecial verification.
NEW ROOF ASSEMBLY - Radiant Barrier
The radiant barrier requirement of S 151 2 does not ap ly to roof alterations.
Slab Edge (Perimeter) Insulation 0 YES 0 NO
YES: In Climate Zone 16 in Component Packages D, R-7 insulation is required.
Heated Slab Insulation 0 YES ONO
YES: Slab edge insulation required for all heated slabs in all Climate Zones. See details in Table i 18-A of the standards.
Raised Slab Insulation Q YES E3 NO
YES: In Climate Zones 1, 2, 11, 13, 14 & 16, R-8 insulation is required; -in Climate Zones 12 & 15, R-4 is required under component Package D.
Thermal Mass
To obtain Compliance Credit for the installation of thermal mass, use the Performance Approach. .
Registration Number: 312-A0012666A-000000000-0000 Registration Date/Time: 08/15/2012 13:06:07 CBPCA
g HERS Provider:
2008 Residential Compliance Forms August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Page 5 of 5
Project Name: Climate Zone # # of Stories
Swank, William system 2 15 1
HERS VERIFICATION SUMMARY The enforcement agency should pay special attention to the HERS Measures specified in this
checklist below. A completed and signed CF -41? Form for all the measures specified shall be submitted to the building inspector before final
inspection.
Duct Sealing & Testing HERS verification is required for this measure.
M YES ❑ NO YES: In Climate Zones 2 and 9-16, if more than 40 linear feet of new or replacement ducts are installed in unconditioned
space, the ducts are to be sealed per §152(b)1Dii and the newly installed ducts are to be insulated per §151(f)10.
❑ EXCEPTION: Existing duct systems that are extended, which are constructed, insulated or sealed with asbestos.
❑ YES ❑ NO YES: In Climate Zones 2 and 9-16, if the existing space -conditioning system (HVAC equipment and ducting) is replaced, the
. ducts are to be sealed per § 152(b)1 Di.
❑ YES ❑ NO YES: In Climate Zones 2 and 9-16, if the existing HVAC equipment is replaced (including the replacement of the air handler,
outdoor condensing unit of a split system, cooling or heating coil, or the furnace heat exchanger) the ducts are to be
sealed per § 152(b) I E.
❑ EXCEPTION: Duct systems that are documented to have been previously sealed confirmed through HERS
verification in accordance with procedures in the Reference Residential Appendix RA3.
❑ EXCEPTION: Duct systems with less than 40 linear feet in unconditioned space.
❑ EXCEPTION: Existing ducts stems constructed, insulated or sealed with asbestos.
Refrigerant Charge -Split System HERS verification is required for this measure.
0 YES i❑ N ES: ate Zone%2 and who th istin HV a ui t is replaced including the replacement of the air
d en Ut , ri Ma f % 1, or the furnace heat
—exchanger) a re t c e measure enc sh verified Der 2(b)t F.
Central Fan Intggrated (CFI) Ve '"°' on
The ventilation re uirements of $150 0 do ot. 1 to existing residential homes.
Ducted Split Systems-fAir Conditio C Sud t psttAi 210 W, requiredfor this measure.
13 YES 0 NO YES: In Climate Lon th_nt)pgh ' fir (HVAC equipment and ducting) is
laced, the air ow aq fan �`' '
iR ca,sha be very�ied, 52(1,)1 o meet the " irements of 151(f)7B.
uocumentanon Author's Declaratiotaltatett%Q
- - �•
• 1 certifv that this Certificate of Com WAman on is a rato and
f }
Name: Tim Esser Signature: Tim Esser
Company:
Esser Air Conditining
Date: 8/15/2012
Address: 36665 bankside Dr,Drive OFC,OFFICE
If Applicable ❑CEA or 13CEPE
(Certification #):
City/State/Zip:
Cathedral City California 92234
Phone:
760-324-0550
Responsible Building Designer's Declaration Statement
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the building design identified on
this Certificate of Compliance.
• 1 certify that the energy features and performance specifications for the building design identified
on this Certificate of Compliance conform
to the requirements of Title 24, Parts 1 and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information provided to document this
building design on the other applicable compliance forms, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Name: Tim Esser
Signature:
Tim Esser
Company:
Esser Air Conditining
Date:
8/15/2012
Address:
36665 Bankside Dr,Drive OFC,OFFICE
License:
489046
City/State/Zip:
Cathedral City California 92234
Phone:
760-324-0550
V--". .csurufrrs fire Gnergy Jranaaras, contact the Energy Hotline at: 1-800-772-3300.
Registration Number: 312-A0012666A-000000000-0000 Registration Date/Time: 08/15/2012 13:06:07 HERS Provider: CBPCA
2008 Residential Compliance Forms August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Pae 1 of 5
Project Name: Climate Zone # # of Stories
Swank, William 15 1
General Information
Site Address: 49690 Rancho San Julian La Quinta CA 92253
Enforcement Agency: La Quinta, City of Date: 8/15/2012
Building Type i7 Single Family ❑ Multi Family
Circle the Front Orientation: N, E,tS, I W, or degrees
Conditioned Floor Area (CFA): 2000
Project Type: ❑� Alterations ❑ Envelope OFenestration ❑ Roof ❑ HVAC
Cell Value" U-factor9
Replacement or Change Out ❑ Duct Replacement ❑ Water Heater
NOTE: This form is not to be used for Newly Constructed Buildings or Additions
Insulation Values For Opaque Surfaces (for Furring use the Mass and Furring Strips Construction table below)
Assembly Alteration
❑ Opening of framed cavity alone— Alterations that involve the opening of the framed cavity of a wall, ceiling, or floor must install the
mandatory minimum insulation value per §150 for the altered assembly. Fill in Columns A —C and enter mandatory insulation value in Column H.
❑ Replacement of entire assembly— Replacement of an entire wall, ceiling, floor
or assembly requires the installation of Component
Package- D insulation values in Table 151-C. Fill in Columns A — J.
Opaque Surface Details For the furred eortioned of Mass Walls see Furring Strips Construction Table below.
A B C D E F GH 1 J
Proposed `° °`e Standard Values From JA4
Table
Framing Aknes sb Framed Continuous
'Dg/ AsseomT Dial I-
3l�ftc
JA4 Proposed
Assembly Assembly
um 1 a
Cell Value" U-factor9
�!
U
o
�
2:1y�
'
Assembly
i I
Nae. For furred assemblies, accounting for Co 'nuousltrstr7ate '� -yolue S`e p q-3-pn n atculating furred walls use the Muss and
FurringConstruction t ble below."'" f
1. For Tag/1D indicate the denti 1ption na iFw match pldn,�
2. Indicate the Assembly Name or type: Ro Eetl rs, Slgbt Crawl oors n'dica the�Frcimtype and Size: For
�e
Wood, Metal, Meta! Buildings, Mass, en t 2x4 C et see J . or othersem`blies.
3
3. Enter the thickness for mass in inches or pacing be en frpming• emb rs enter; ; or Other or al! other assembly description
such as Concrete Sandwich Panel, Spandrel Panel, Logs, Str al Panel and etc....
4. Based on the Climate Zone: enter the Standard U -factor fro Table 151-B, C or D for each dierent assembly type.
-Name or
5. Enter the Table number that closely resembles the proposed assembly.
6. Enter the R -value that is being installed in the wall cavity or between the framing; otherwise, enter " 0 ".
7. Enter the Continuous Insulation R -value for the proposed assembly; otherwise, enter " 0 ".
8. Enter the row and column of the U factor value based on Column F Table Number and enter the Assembly U factor in Column J
9. The Proposed Assembly U factor, Column J, must be equal to or less than the Standard U factor in Column E to comply.
urring Strips Construction Table for Mass Walls
_ A I B I C I n
E
Proposed Properties of Masonry and Concrete
Walls From Reference
Joint A endix Table 4.3.5 4.3.6, 4.3.7
U
o
�
2:1y�
'
Assembly
c -J
Mass
Thickness'
Name or JA4 Table
Type2 Number'
¢ >
F I G I H I 1 1 J 1 K
Added Interior or Exterior Insulation
in Furring Space from Reference
L
M
Joint Appendix Table 4.3.13
>
c 5
2:1y�
'
c -J
u C�
r
> U
A
s
.3
o � io
F [= �
v a� �
^
en °� ,> > a�
� � 'v �
Final
a,
.N. K
t`0 O
> id N >
Assembly
PJ
W,>
U -factor'
Comment
Registration Number: 312-A0012665A-000000000-0000 Registration Date/Time: 08/15/2012 13:02:01 HERS Provider: CBPCA
2008 Residential Ce)mnlinnrn F.,r.
August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Pa e 2 of 5
Project Name: Climate Zone # # of Stories
Swank, William 115 1
Mass and Furring Strips Construction(footnotes)
1. Indicate the tvpe of assembly to include; Hollow Unit Masonry Walls, Solid Unit Masonry, Solid Concrete Walls, Etc. Additional assemblies can
be found Reference Joint Appendix JA4.
2. This is the U -Factor based on the thickness of the assembly in inches.
3. The R -value of the insulation to be added on the interior or exterior of the assembly.
4. The Calculated R- Value is the R -value of the furred out section of the assembly.
-6. The Final Assembly is calculated using Equation 4-2 or Equation 4-4of the Reference Joint Appendix J44. The equation is the inverse of Column
added to Column I. Column K is the inverse from column J.
7. Insert the calculated U- actor value on to the Opaque Sur ace Details in Column J
FENESTRATION PROPOSED AREAS
❑ Replacing window alone — Replacement windows shall meet the U -Factor and SHGC Value requirements of Component Package D in
Table 151-C. The Total Fenestration and West facing Area requirements are not applicable.
❑ Adding 50ft2 or less of window area — Newly installed windows shall meet the U -Factor and SHGC Value requirements of Component
Package D in Table 151-C.
❑ Adding more than 50ft2 of window area — Newly installed windows shall meet the U -Factor and SHGC Value and the Fenestration
Area requirements ofComponeni Package D in Table 151-C. Complete the Altered Fenestration Allowed Area Table on Page 2 of the CF- IR -ALT
fCpre Re rbane
Fenestra ttt�ta i r
m NFRC or Default
window, Glass.Door,or-Sk ti ht ,.,,w,r..,,� ouch, We.) ftZ)
U
,-factor2' 3 SHGC„ :° Value 5
_
Allowed
Existing
Fenestration
Total Area
1. Fenestration area is the area of total glaeAt (11O[ItiGt a eT$lc;ss plus frotneJ. is less than -50% glass, the fenestration
area rn v be the glass area plus a '7 inc rain glass.
r
2. Enter value from Component Package D Require en s in Table 151-C. ly/
3. Actual fenestration products installed and as indicated in CF
6R -I V Form shall be equivalent to or have a lower U factor and/or a lower
SHGC value than that specified on the CF -I R ALT Form.��
4. Submit a completed WS -3R Form lfa reduced SHGC is calculated with exterior shading.
5.1fopplicableal this sta a enter "NFRC" or NFRC Certified windows or are CEC "Default" values bund in Table 116-A or B.
ALTERED FENESTRATION ALLOWED AREAS (Complete if more than 50jtz offenestration is added)
A
B
C
D
E
F
G
Allowed
Existing
Fenestration
Total Area
CFA of Entire
%of
Fenestration
Area
Fenestration
Allowed
Proposed Area
Total Fenestration Area
Dwelling
CFA
Area
Removed
Area Added
A x B
(E -D) + C
>
(ftz)
.20
West Fenestration Area
(Required In
CZ's 2,4&7-15
.05
1. West Fenestration Area includes west -sloping skylights and any skylights with a pitch less than 1:12.
2. West facing glazing area removed cannot be "counted" twice. " In order to distribute the west glazing area removed to the other orientations,
input the west glazing area removed in the Total Fenestration Area row, column D.
3. Include the Proposed Area of the West facing fenestration in both Area columns below.
4. To meet compliance, the Proposed Area must be less than orequal to the Total Allowed Area or BOTH the Total and West Fenestration Areas.
Registration Number: 312-AO012665A-000000000-0000 Registration Date/Time: 08/15/2012 13:02:01yERSProvider: CBPCA
2MM8 R 'd
est enirl
a Compliance Forms Augtts! 2009
Prescriptive Certificate of Compliance: Residential CF -1 R -ALT
Residential Alterations
Page 3 of 5
Project Name: Climate Zone # # of Stories
Swank, William 15 1
ROOFING PRODUCTS (COOL ROOFS) §151(1),12
When the area of exterior roof surface to be replaced exceeds more than 50% of the existing roof area, or more than 1,000f?, whichever is
less, the new roofing area must meet the roofing product "Cool Roof' requirements of §152(b)IHi, 152(b)1Hii, or 152(b)IHiii.
Check applicable alternative or exception below if the roof alteration is exempt from the roofing product "Cool Roof 'requirements. Note: 1f any
one of the alternatives or exception below is checked, the Aged Solar Reflectance and Thermal Emittance requirements for roofing products in
§118(1) are not applicable. Do not fill table below.
❑ Cool Roofs Not Required in Climate Zones 1-12, 14, and 16 with a Low Sloped. Less or 2:12 pitch.
❑Cool Roofs Not Required in Climate Zones 1 through 9 and 16 with a Steep -Sloped Roofs (pitch greater than 2:12) and product unit weight less
than 5lb/ft2.
Alternatives to §152(b)lHi and §152(b)Hii, Steep -slope roof (pitch > 2:12)
❑ Insulation with a thermal resistance of at least 0.85 hr- ft2-*FBtu or at least a 3/4 inch air -space is added to the roof deck
over an attic; or
❑ Existing ducts in the attic are insulated and sealed according to §151(f)10; or
❑ In climate zones 10, 12 and 13, with 1 ftZ of free ventilation area of attic ventilation for every 150 ft2 of attic floor area, and
where at least 30 percent of the free ventilation area is within 2 feet vertical distance of the roof ridge; or
❑ Building has at least R-30 ceiling insulation; or
❑ Building has rUdWII the attic meting requirr, en pf § 15 I (02;.
❑ Building has 1)) r n i a I d �"! ff o r +� c
❑ In climate zones 10�L);d3 and.14, R-3 oc r r deck ins ation a e vented attic. i >fr
Exception to §152(b)11H"rii, Low slop foo {pit 1)t ! iii i�ito l"'� s s c oi a 1 i o n
❑ Building has no ductsin a attic. -A
Other Exceptions
❑ Roofing area covered by. building integ, 0 taie Mels an d So therm from the below Cool Roof criteria.
❑ Roof have
constructions that -thermal tri s.over a ro fimem r� a With a east 2 is ex om the,below-Cool Roof criteria.
Note: If no CRRC- I label is available,Ahis i ce m 1213 d cannot a use tr a rformance Approach to show compliance, otherwise,
Check theapplicable box Below if Exe firoln the 8&-%- 7gProdu-Zts"Cool Roo uire .�
Slope Product W�eigh ged-Solar" Thrmal
CRRC Product ID Number _ Z: ¢ 51b% ?URIft eflectance''4 Emittance SR.1
❑
❑
❑
❑
❑
❑
❑
❑
❑4
❑
❑
❑
❑
❑4
❑
❑
❑
❑
❑4
1. The CRRC Product ID Number can be obtained from the Cool Roof Rating Council's Rated Product Directory at wivw.coolroofs.ore/products/searchphp
2. Indicate the type of product is being used for the rooftop, i.e. single -ply roof, asphalt roof, metal roof, etc.
3. If the Aged Reflectance is not available in the Cool Roof Rating Council's Rated Product Directory then use the Initial Reflectance value from the same
directory and use the equation (0.2+0.7(pt„ itw1— 0.2) to obtain a calculated aged value. Where p is the Initial Solar Reflectance.
4. Check box if the Aged Reflectance is a calculated value tering the equation above.
J. Calculate the SRI value by using the SRI- Worksheet at hno:/hviviv.energy, ca.eov/title24/and enter the resulting value in the SRI Column above and attach atopy of
the SRi- Worksheet to the CF -I R.
—
To apply Liquid Field Applied Coatings, the coating must be applied across the entire roof surface and meet the dry mil thickness or coverage
recommended by the coatings manufacturer and meet minimum performance requirements listed in § 1 18(1)4. Select the applicable coating:
❑ Aluminum -Pigmented Asphalt Roof Coating JO
Cement-Based Roof Coating
❑ Other
Registration Number: 312-A0012665A-000000000-0000
2008 Residential Compliance Forms
RegistrationDate/Time: 08/15/201213:02:01 HERS Provider: CBPCA
August 2009
Prescriptive Certificate of Compliance: Residential CF -IR -ALT
Residential Alterations Page 4 of 5
Project Name: Climate Zone # # of Stories
Swank, William 15 1
HVAC SYSTEMS - HEATING
Heating Equipment
Minimum
Efficiency
Distribution
Duct or Piping
Insulation
Thermostat
Configuration
(Central, Split,
Type and Capacity 1•2''
AFUE or HSPF
Type and Location
R -Value
Type
Space, Package or H dronic
Furnace, 44000
80 AFUE
Ducted,
SetBack
Split
1. Indicate Heating Type (Central Furnace, Wall Furnace, Heat pump, Boiler, Electric Resistance, etc.)
2. Electric resistance heating is allowed only in Component Package C, or except where electric heating is supplemental (i.e., if total capacity
< 2 KW or 7,000 Btu/hr electric heating is controlled by a time -limiting device not exceeding 30 minutes). See §151(b)3 exception.
3. Refer to the HERS Verification section on Page 4 of the CF -1 R -ALT Form for additional requirements and check applicable boxes.
4. Indicate Type or Location (Ducts, Hydronic in Floor, Radiators, etc.)
HVAC SYSTEMS - COOLING
Minimum
Cooling Equipment
Z
Efficiency Duct or Piping Configuration
(SEER/EER or Distribution insulation Thermostat (Central, Split,
T e and Ca aci
COP) Type and Location' R -Value Type Space, Package or H dronic
AirConditioner, %0014
SEER pct
SetBack Split
mance
1. Indicate Cooling Type4(A!C ffiiitpump,� Co [c
2. Refer to the Aft
HERSIVerfcatton sectionp, P e �/ aT tr
tl oxes.
3. Indicate Ty e or Location (D cts„Hydro Ica loor [Zgdialors, etc.)
WATER HEATING;,
List water heaters and boilers for both do "e*sate
s an h' /rrdividua/ d►veW heaters must be
gas orpropanefrred, and inay no7 exceedulati- nfrgm DHW t 21kttchen(s)dndan al! underground
hot water i es is re uired in.a!! com one'
Extemal Tank
Water Heater Type/Fuel Distribution Type um ern Energ� y Faactor or insulation
Type' (Standard, Recirculatin Z System Ca acit (al) i TherulBl--Eificien R -Value'
1. Indicate Type (Storage Gas, Heat Pump, Instantaneous, etc.)
2. Recirculating systems serving multiple dwelling units shall meet the recirculation requirements of §150(n). The Prescriptive requirements do
not allow the installation of a recirculating water heating system for single dwelling units.
3. The external water heating tank and i es shall be insulated to meet the requirements of §1506).
SPECIAL FEATURES The enforcement agency should pay special attention to the Special Features specified in this checklist below.
These items may require writtenlush cation and documentation and s ecial verification.
NEW ROOF ASSEMBLY - Radiant Barrier
The radiant barrier requirement of § 151 2 does nota I to roof alterations.
Slab Edge (Perimeter) Insulation 0 YES it NO
YES: In Climate Zone 16 in Component Packages D, R-7 insulation is required.
Heated Slab Insulation f YES 13 NO
YES: Slab edge insulation required for all heated slabs in all Climate Zones. See details in Table 118-A of the standards.
Raised Slab Insulation Q YES 0 NO
YES: in Climate Zones I, 2, 11, 13, 14 & 16, R-8 insulation is required; in Climate Zones 12 & 15, R-4 is required under component Package D.
Thermal Mass
To obtain Compliance Credit for the installation of thermal mass, use the Performance Approach.
Registration Number: 312-A0012665A-000000000-0000 Registration Date/Time: 08/15/2012 1.3:02:01 CBPCA
2008 Residential C'nr»nlinnrn F'„�.,, g HERS Provider:
August 2009
Prescriptive Certificate of Compliance: Residential CF -1 R -ALT
Residential Alterations Page 5 of 5
Project Name: Climate Zone # # of Stories
Swank, William 15 1
HERS VERIFICATION SUMMARY The enforcement agency should pay special attention to the HERS Measures specified in this
checklist below. A completed and signed CF -41? Form for all the measures specified shall be submitted to the building inspector before final
inspection.
Duct Sealing & Testing HERS verification is required for this measure.
0 YES ❑ NO YES: In Climate Zones 2 and 9-16, if more than 40 linear feet of new or replacement ducts are installed in unconditioned
. space, the ducts are to be sealed per §I52(b)1Dii and the newly installed ducts are to be insulated per §151(010.
❑ EXCEPTION: Existing duct systems that are extended, which are constructed, insulated or sealed with asbestos.
❑ YES ❑ NO YES: In Climate Zones 2 and 9-16, if the existing space -conditioning system (HVAC equipment and ducting) is replaced, the
ducts are to be sealed per § 152(b)1 Di.
❑ YES ❑ NO YES: In Climate Zones 2 and 9-16, if the existing HVAC equipment is replaced (including the replacement of the air handler,
outdoor condensing unit of a split system, cooling or heating coil, or the furnace heat exchanger) the ducts are to be
sealed per § 152(b) I E.
❑ EXCEPTION: Duct systems that are documented to have been previously sealed confirmed through HERS
verification in accordance with procedures in the Reference Residential Appendix RA3.
❑ EXCEPTION: Duct systems with less than 40 linear feet in unconditioned space.
❑ EXCEPTION: Existing ducts stems constructed, insulated or sealed with asbestos.
Refrigerant Charge -Split System HERS verification is required for this measure.
0 YES ION ES: ate Zones,2 and whe th existin HV a ui t is replaced including the replacement of the air
Of,eni t ,'I<'11'YI, or the furnace heat
exchanger) a refr ecan c e measurements h verified per &152(b) I F.
Central Fan Integrated�(CEI) V,,e00talvdinly
t �' 0WASSOC� '�
The ventilation requirements of Y50 0. •doto existing residential homes.
Ducted Split Systems -Air Conditio ers A d t pSt A tlOW tt required jor this measure.
0 YES NO YES: ]n Climate Zon 1pthm S,wltentheex' tirtspa� (HVAC equipment and ducting) is
' re lac d; the air 0w.an fan tiraxyr be vers ed eri 52(b)1 Imee t.the`re' uiremeats of 151(f)7B.
tuucumentanon Autnor's Declaratiotl,Sta'temeu
• 1 certify that this Certificate of Com a0clittttn ation is eeurate'and
% :r"'`
Name: Tim EsserSignature:
Tim Esser
Company:
p y' Esser Air Conditining
Dater
8/15/2012
Address: 36665 bankside Dr,Drive OFC,OFFICE
If Applicable COCEA or ❑CEPE
City/State/Zip:
(Certification #):
Cathedral City California 92234
Phone: 760-324-0550
Responsible Building Designer's Declaration Statement
• I am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the building design identified on
this Certificate of Compliance.
• 1 certify that the energy features and performance specifications for the building design identified
on this Certificate of Compliance conform
to the requirements of Title 24, Parts I and 6 of the California Code of Regulations.
• The building design features identified on this Certificate of Compliance are consistent with the information provided to document this
building design on the other applicable compliance forms, worksheets, calculations, plans and specifications
submitted to the enforcement
agency fora :)roval with this buildin ermit application.
Name:
Tim Esser
Signature:
Tim Esser
Company:
Esser Air Conditining
Date:
8/15/2012
Address:
36665 Bankside Dr,Drive OFC,OFFICE
License:
489046
City/State/Zip:
Cathedral City California 92234
Phone:
760-324-0550
,,,C crrergy atanaaras, contact the Energy Hotline at: 1-800-772-3300.
Registration Number: 312-A0012665A-000000000-0000 Registration Date/T7me: 08/15/2012 13:02:01 HERS Provider:
CBPCA
20
08 Restdentral Compliance Forms August 2009
Bin #
Clty of da QLlinta
Building &r Safety Division t�
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
Project Address: 89694 PA"010 SAN Ju/.IAN
Owner's Name:
A- P. Number:
Address: 1,496',90 RANO HO SAN Svc/A N
Legal Description:
City, ST, Zip: AA QUI -?A, CA 0-12-13
Contractor: ,t S 5 S= Av i C ES Ohl C.
Telephone: '
Address: o. zc>x 163
Project Descr iption: R,6AAAGE 2 rX/syiN6 .S7C,N
City, ST, Zip: eA-%riC D RA L CI -TY, C A, c11235-
S p� fyrs7EM S. ,�
wits/ /4" X6 -E S -fN
Telephone: 76o . 3 2 4.O'i .SO
"j ` ` " '" = ,• > .
<
City Lie. C
S y 7 M 5
State Lic. # : /f • $ l D it (
Arch., Engr., Designer.
Address:
City., ST, Zip:
Telephone:
Construction Type: Occupancy:
State Lia #:
' Y'"""
J � ( ). ep
Project (circle one): Now Add'n Alter Repair Demo
Name of Contact Person: VA V S D W i t_ IA M.5
Sq. Ft:
#Stories:
#Units:
Telephone # of Contact Person: 76 cp 3 2 r'1'. 5,5-o
Estimated Value of Project: 14el Ql%O
APPLICANT: DO NOT WRITE BELOW THIS UNE
#
Submittal
Plan Sets
Req'd
Recd
TRACIONG
Plan Check submitted
PERMIT FEES
Item Amount
Structural Coles.
Reviewed, ready for corrections
Plan Check Deposit
Truss Cala.
Called Contact Person
Plan Check Balance
Title 24 Calcs.
Plans picked up
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
V Review, ready for correctionsfissue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.L
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
3" Review, ready for correctionslissue
Developer Impact Fee
Planning Approval
Called Contact Person
A.LP.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees