BMCH2016-031878-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: BMCH2O16-0318
Property Address: 78235 RED HAWK LN
APN: 623490019
Application Description: STRAUSE RESIDENCE / HVAC
Property Zoning:
Application Valuation: $22,750.00
Applicant:
IE INC
31225 LA BAYA
WESTLAKE VILLAGE, CA 91362
Twit 4 4 Q"
DESIGN &' DEVELOPMENT DEPARTMENT
BUILDING PERMIT
� AUG•.1 � 2016
CITY CF LACUINTA
GotAMUNITY DEVELOPML-NT DEPARTMENT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 {commencing with Section 70001 of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: License No.: 977333
Date:2 ) q I IL, contractor: _9, . 7
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
(_) 1 am exempt under Sec. B.&P.C. for this reason
Date
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
VOICE (760) 777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 8/19/2016
Owner:
JACK STRAUSE
78235 RED HAWK LN
LA QUINTA, CA 92253
Contractor:
A#1 SERVICES HEATING & AIR CONDITIONING
78206 VARNER ROAD #D-189
PALM DESERT, CA 92211
(760)342-3610
Llc. No.: 977333'
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
ofthe for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for -the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
Carrier: REPUBLIC UNDERWRITERS INSURANCE COMPANY Policy Number: ATW
1 certify that in the performance of the work for which this permit is issued, I
shall not employ any person.in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Date:'FIq Ito Applicant:
WARNING: FAILURE TO SECURE•WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVILTINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN.SECTION 3706 OF THE LABOR CODE, .
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person'upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and*state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the
above-mentioned property for inspection purposes.
Date: g? I q 1 bSignature (Applicant or Agent): ��
Date: 8/19/2016
f t
Application Number:, BMCH2016-0318
Owner:
Property Address: 78235 RED HAWK LN
JACK STRAUSE
APN: 623490019.
•78235 RED HAWK LN
Application Description: STRAUSE RESIDENCE / HVAC
LA QUINTA, CA 92253
Property Zoning:
Application Valuation: $22,750.00
Applicant:
Contractor:
IE INC
A#1 SERVICES HEATING & AIR CONDITIONING
31225 LA BAYA
78206 VARNER ROAD #D=189
WESTLAKE VILLAGE, CA 91362
PALM DESERT, CA 92211
(760)342-3610
Llc. No.: 977333
Detail: (2) HVAC CHANGE OUTS- 18 & 19 SEER/80AFUE SPLIT SYSTEM [2008 ENERGY)
CARBON MONOXIDE ALARM(S) TO BE INSTALLED PRIOR TO FINAL
INSPECTION. PER 2013 CALIFORNIA BUILDING CODES.
FINANCIAL INFORMATION
DESCRIPTION ACCOUNT QTY AMOUNT
BSAS 5B1473 FEE 101-0000720306
0 $1.00
Total Paid for BUILDING. STANDARDS ADMINISTRATION BSA: $1.00 .
DESCRIPTION
ACCOUNT
QTY
AMOUNT
HVAC CHANGEOUT - SPLIT -SYSTEM
101-0000-42402
0
$145.04
DESCRIPTION
ACCOUNT
QTY
AMOUNT
HVAC CHANGEOUT - SPLIT -SYSTEM PC
101-0000-42600
0
$72.52
Total Paid for CHANGEOUT: $217.56
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PERMIT ISSUANCE
101-0000-42404
0
$91.85
f
Total Paid for PERMIT ISSUANCE: .$91.85
0.4
13tH:#
Of '.La QU1f1ta
Building 8L Safety Mlsion
P.O. Box 1504,78-495 Calle Tampico
4.Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
Project Address: 78235 Red Hawk Lane
Owner's Name:. Sherry Strause
A. P. Number.
Address: 78235 Red Hawk Lane
Legal Description:
City, ST, Zip: La Quints, CA 92253'
Contractor. A#1 Services Heating & A/C
Telephone: ,. -�,;sa<.,,w
Address: 78206 Varner Road #D-189.
Project Description: , :r
City, ST, Zip: palm Desert, CA 92211
Replace 3ton / 70,000 BTU Complete HVAC System
Telephone: 760-342-3610 ' Replace stem 4ton / 90,000 BTU Complete HVAC S
P P Y
State Lie. # : 977333 City Lic. 9:
Arch, Engr., Designer.
Addr=:
City, ST, Zip:
Telephone:
State Lir- #: r "''
Name of Contact Person: Steven Schnierer
Construction Type:. Occupancy:
Project type (circle one): New Add'n Alter Repair Demo
Sq. Ft :
# Stories: #Units:
Telephone # of Contact Person: 8.18-735-7876
Estimated value of Project: $22,750.00 .
APPLICANT: DO NOT WRITE BELOW THIS LIME
#
Submittal
Req'd
Reed
TRACMG
PERMT FEES-
Plan Sets
Plan Check submitted
Item Amount
Structural Calci.
Reviewed, ready for corrections
Plan Check Deposit, .
Truss CAcs.
Called Contact Person
Plan Check Balance
Title 24 Calci.
Pians picked up
Construction
Floodplain plan
Plans resubmitted
Mechanical
Grading plan
tad Review, ready for correctiousrissue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
t S.NLL
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
'^' Review', ready for correctionsrmuc
Developer Impact Fee
Planning Approval
Called Contact Person
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
STATE OF CALIFORNIA
ALTERATIONS - HVAC
R 7
CEC-CFIR-ALT-04-E Revised 03/15 CALIFORNIA ENERGY COMMISSION '40i
CERTIFICATE OF COMPLIANCE CF1R-ALT-04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Date Prepared:
Permit#:
78235 Red Hawk Lane
City Of La Quinta
August 19, 2016
Equipment Type
Equipment Efficiency
New Ducting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged
XEvaporator Coil
80% AFUE
COP
❑ R-6 (CZ2, 8-13) Ducting
Served by system
XSetback
System .
XCondensing Unit
❑ R-8' (CZ 11, 14, 15) Ducting
2390 sgft
(If not already
XSplit System
❑ Compressor
18 SEER
HSPF
❑ R-6 (all CZ's) Plenums
present, must
❑ Mini Split
❑ Lineset
EER
❑ R 5 or R7.5) Lineset ,
be installed)
Furnace
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
C 1. HVAC Changeout/Repair
Required Compliance Documents to be left on site for Final:
All Equipment,
CFIR-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24)2 -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24)-HERS2, MECH-25-HERS2
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (<_15%', or < 10% to outside, or seal all accessible leaks), Air Flow 2 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if:
❑ 1. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building
❑ 2. New HVAC System
Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts'
CF111-ALT-024
including Mini Split
CF2R: MECH-01, MECH-20-HERS, MECH-22-HERS, MECW(23 or 24) -HERS', MECH-25-HERS' .
CF3R: MECH-20-HERS, MECH-22-HERS; MECH-(23 or 24)-HERS2, MECH-25-HERS2
Mini Splits require CFIR-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow 2 3S0 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement
Required Compliance Documents to be left on site for Final:
All New Ducts' and one or more of the following
CF1R-ALT-02-E
replaced: Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace2
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Air Flow 2 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: ❑ 1. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet
Required Compliance Documents to be left on site for Final:
New ducting but less than All New Duds'
I CFIR-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
.Installer Required to: Duct leakage.(< 15% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos.
'All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls; between floors etc.
.2 Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
' All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%", 2.5-3T-2%", 3.5 to 4T-2%", ST -4y8"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR). ,
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents; worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
Date Signed:
License:
Steven SchniereryL
August 19, 2016
977333
Company:
Address:
City/State/Zip:
Phone:
A#1 Services Heating & A/C
78206 Varner Road #D-189
I Palm Desert, CA 92211
760-342-3610
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300
STATE OF CALIFORNIA
ALTERATIONS - HVAC
WIN
CEC-CFIR-ALT-04-E Revised 03115 CALIFORNIA ENERGY COMMISSION '"O�
CERTIFICATE OF COMPLIANCE CFIR-ALT-04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Date Prepared:
Permitil:
78235 Red Hawk Lane
City Of La Quinta
August 19, 2016
Equipment Type
Equipment Efficiency
New Ducting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged
REvaporator Coil
80%AFUE
COP
❑ R-6 (CZ 2, 8-13) Ducting
Served by system
;Setback
System
]Condensing Unit
19
❑ R-8' (Q 11, 14, 15) Ducting
2390 sqft
(if not already
XSplit System
❑ Compressor
SEER
HSPF
❑ R-6 (all CZ's) Plenums
present must
❑ Mini Split
❑ Lineset
EER
❑ R-5 or R7.5) Lineset'
be installed)
]Furnace
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of -the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
R1. HVAC Changeout/Repair
Required Compliance Documents.to be left on site for final:
All Equipment,
CF1R-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24)' -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (< IS%, or < 10% to outside, or seal all accessible leaks), Air Flow 2 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if:
❑ 1. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building1
❑ 2. New HVAC System
Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts'
CFIR-ALT-02-E
including Mini Split
'CF2R: MECH-01, MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24)-HERS2, MECH-25-HERS' .
CF3R: MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Mini Splits require CF1R-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow 2 350 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement Required Compliance Documents to be left on site for Final:
All New Ducts' and one or more of the following CFIR-ALT-02-E
replaced: Condenser Unit, Evaporator Coil, CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace' CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage :< 6%, Air Flow z 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: ❑ 1. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts'I CFIR-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
Installer Required to: Duct leakage (< IS% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos._
'All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls; between floors etc.
' Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
3 All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
° R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%", 2.5 -3T -2Y4", 3.5 to 4T-2%', 5T-4%"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR).
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
Date Signed:
License:
Steven Schnierer
I'C/LyZ�
August 19, 2016
977333
Company:
Address:
City/State/Zip:
Phone:
A#1 Services Heating & A/C
78206 Varner Road #D-189
1 Palm Desert, CA 92211
1 760-342-3610
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300