08-1790 (AR)1
P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: 08-00001790
Property Address: 78930 RANCHO LA QUINTA DR
APN: 646-370-007- - -
Application description: ADDITION - RESIDENTIAL
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 5000
Applicant: Architect or Engineer:
(f oX_,rzl .4� X -101 -
•4,4 "
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Owner:
BIANCHI TITO J
52 JAMES AVE
ATHERTON,. CA 94(
Contractor:
SANTUCCI BUILDEI
72529 BEAVERTAII
PALM DESERT, CA
(760)578-7757
Lic. No.: 820801
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 5/18/09
------------------------------------------------------------------------------------------——------
LICENSED CONTRACTOR'S DECLARATION
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
I hereby affirm under penalty of perjury one of the following declarations:
Section 7000) of Division 3 of the B siness and Professionals Code, and my License is in full force and effect.
I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
License C ss: B License No.: 820801
_
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
4
issued.
Date: / / Contractor:
_ I. have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
- Code, for the performance of the work for which this permit is issued. My workers' compensation
OWNER -BUILDER DECLARATION
insurance carrier and policy number are:
hereby affirm under penalty of perjuryt am exempt from the Contractor's State License Law for the
Carrier EXEMPT Policy -Number EXEMPT
following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to
_ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
person in any manner so as to become subject to the workers' compensation laws of California,
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State -
me subject to the workers' compensation provisions of Section
and agree that, iIRRS'
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
/ 3700 of the Labl forthwith comply with those provisions. .
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
Date: Applicant:
(_ 1 I, as owner of the property, or my employees with wages as their sole compensation,. will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
WARNING: FAILURE TO SECURCOMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
SUBJECT AN EMPLOYER TO CLTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
and who does the work himself or herself through his or her,own employees, provided that the.
DOLLARS 1$100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).APPLICANT
ACKNOWLEDGEMENT
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
conditions and restrictions set forth on this application.
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
1. Each person upon whose behalf this application is made, each ger§Qn at yyhQ5Q reaugat and far .
V-1-11 to the eu111.1—U13' Jrare LIL,ense Law.).
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
1_) I am exempt under Sec. , B.&P.C. for this reason
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
I h k
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name: _
Lender's Address:
LQPERMIT
of La Ownta, its officers, agents and employees for any act or omission re ate d to t e wor being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation. `
I certify that I have read this application -and statethat he above information is correct. 'I agree to comply with all
city and county ordinances and state laws relating to i,
city construction, and hereby authorize representatives
of thiFitt rt upon the above-mentioned prop inspection purposes.
Date:ignature (Applicant or Agent): .
Application.Number . . . . 08-00001790
------ Structure Information NANAWALL SYSTEM INSTALLATION•'
-----
Other struct info .. CODE EDITION 2007
FLOOD ZONE NO
1ST FLOOR SQUARE FOOTAGE
---------------------------------------------------------------------------
5.00
Permit . . . . BUILDING PERMIT
' Additional desc .
Permit Fee 72.00 Plan Check Fee
46.80
Issue Date .. Valuation . .
5000
Expiration Date 6/20/09
Qty Unit Charge Per
Extension
BASE FEE
45.00
3.00 9.0000 THOU BLDG 2,001-25,000
-----------------------------------------------------------------------------
•27.00
Permit . . . ELECT - ADD/ALT/REM
Additional desc .
Permit Fee. . . 15.18 Plan Check Fee
3.80.
Issue Date . . . . Valuation . . . .
0
Expiration bate -6/20/09
Qty Unit Charge Per
Extension
BASE FEE
15.00
5.00 .0350 ELEC NEW RES - 1 OR 2 FAMILY
.18
----------------------------------------------------------------------------
Special Notes and Comments
5SF ADDITION TO INSTALL NANAWALL AT REAR
PATIO. REMODEL/ADDITION [ENGINEERED]
2007 CALIFORNIA BUILDING CODES.
'December 22,' 2008 4:45:58 PM AORTEGA
----------------------------------------------------------------------------
Other Fees . . . . . . . 'ENERGY REVIEW FEE
4.68
STRONG MOTION (SMI) - RES
.50
Fee summary Charged Paid Credited
Due
Permit Fee Total 87.18 .00 .00
87.18
Plan Check Total 50.60 .00 .00.
50.60
Other Fee Total 5.18 .00 .00
5.18
. Grand Total 142.96 .00 .00
142.96
LQPERMIT .
_ .
B`° #
*w
City of la Quinta
Building & Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
1#1
Project Address: g— 93tj
Owner's Name: tL
v �C
A. P. Number: i � +G _ 3 _
Address: 5-2 s
Legal Description:
City, ST, Zip: 4-0 2
Contractor: k C� 1 �eY� �-t�tG
Telephone:
�m
Address: — -
i
-Project Description: E t Al
City, ST, Zip:
Cr
Telephone: .
id 405-
LL.
State Lic. # : City Lic. #:
Arch., Engr., Deer. C C•
Address: — s
City, ST, Zip:
Telephone: 3 _
State Lic. #:
Name of Contact Person: 5EK p _ ` -
Construction Type: V —� Occupancy: —
Project type (circle one): New Add :n Alte"r epair Demo
Sq. Ft.: J # Stories: # Units:
Telephone # of Contact Person: 3 (y33s-"
Estimated Value of Project: S ��
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Ree'd
TRACKING
PERMIT FEES
Plan Sets
Plan Check submi
nn
Item
Amount
Structural Calcs.
Truss Calcs.
Reviewed, rea f rrections
Called Contact Pe I
Plan Check Deposit
Plan Check Balance
Energy Calcs.
Plans picked up u (
Construction
Mechanics.)
Flood plain plan
Plans resubmitted (
Grading plan
2"° Review, ready for correction issu
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
fN HOUSE:-
''" Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
A.t�x�. .�.�a- /1.608' �2`2212�-1�u�Atto'�*5�
CERTIFICATE OF COMPLIANCE ,
Desert Sands Unified School District 4Ccs�o
47950 Dune Palms Road ¢ BERMUDA DUNES 0
1n RANCHO MIRAGE
Date 5/18/09 La Quinta, CA 92253 INDIAN WELLS
No. 30392 (760) 771-8515 d PALM DESERTV
LA QUO y
INDIO y�
Owner Bianchi APN # 646-3*70-007
Address 78930 Rancho La Quinta Drive Jurisdiction La Qui.nta
City La Quinta Zip Permit #
Tract # No. of Units 1
Type Residential Addition
Lot # No. Street S.F. Lot # No. Street S.F.
Unit 1 78930 Rancho La Quinta Dr 5 Unit 6
Unit 2 Unit 7
Unit 3 Unit 8
Unit 4 Unit 9
Unit 5 Unit 10
Comments
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under 5
00 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating orsanitation) or replacement mobile ho ,
mes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 5 S.F. or $0.00 have been paid for the property listed above and that
building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued.
Fees Paid By Exempt - Jerry Santucci Check No.
Name on the check Telephone 578.7757
Funding Exempt
By Dr. Sharon P. McGehee
Superintendent
Fee collected /exemp d by ro ilvrey Payment Recd Y y, '0.0.)
.;,.ver/Under; �`� •'
Signature
r r
NOTICE: Pursuant to Government Code Section 66020(d)(1), this w I serve to notify you that the 90 -day approval period in which you may protest the fees o
r other payment identified above will begin to run from the date ich the building or installation permit for this project is issued, or from the date on which
those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed sea'!.
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
RANCHO LA QtJIN-T •OCT S 0 200$- 1..
'u MASTER. ASSOCIATION
Architectura.ControI Committee
September 1g,�,2008.. "
.Mr. Tito Bianchi
Mr,Jerry Santucci • ''. f
:78=930 Rantho:LaQuinta Dr.--;
La'Quinta; CA 92253
. : Re: '78 ,930'Rancho La Quinta Dr
'Approva`l of Submission-.,
_The Architectural Committee:reviewed your submission •for the installation of
new, glass .collapsible rear doors.- The subr iission, as.presented- is approved'
upon, condition of.•
The Committee requires the following:
:.: All work is to be done in accordance with .all applicable requirements :of
governmental entities,. including.the: City. of- La Quinta and in ;
accordance with all, Homeowners Association archi tectu•rat guidelines, ,`
and governing„ documents:. ` -
: If apoiicable, a City .of La' Qciinta building permit be. obtained and- copy
` furnished to the Association prior to commencement of work.
When the work has-been finished`; please return.."Notice of,Completion" to the-'
Association Office. The_Association's architectural consultant will perform, a
final,inspection after receipt of such notice. "Your deposit will be .returned
. "upon satisfaction of inspection'
Thanking you in advance and if any, questions please -do not, hesitate to. call ; .
me at the on, site office 777.8807..,
Mary, E. Ikee, CCAM ;
Association General Manager
}zancko La Quints MasterA550ciation - ,• - , - •^
760.777.8807' fax 760.777.8961 ^
Email : mwalker@drminternet:com "
cc: -Architectural Comm.
' t 79-285 RA\ciio LA,QUINTA De. r LA'Qui�rA, CA 92253 • 760-777=8807 FAX 760-777-8961
V
TITLE 24 REPORT
Title ' 24 Report for:
An Addition For The TiTo Bianchi Residence
78-930 Rancho La Quinta Dr.
' La Quinta, CA 92253
Project Designer:
Sergio H Garcia Design Consultant
50-101 Kenmore St.
coachella, CA 92236
(760)393-6335
` Report Prepared By:
S.G.S.
Sergio H. Garcia Consulting
P.O. Box 12513
r Palm Desert, CA 92255
(760 )393-6335
I U12blZUUt3
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is"
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.3 by EnergySoft Job Number: T-06-2008 User Number: 6079
r .>
Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R
_AnAddition-F-or-T_h.e_T_iT_o_Rianchi_Re.s.id.e.n.ce
2,408
10%28/_2QQ8
Project Title
Z8-93.OJ-�,la ncho_La_Q.0 i nta_DL-La_Q.u.i nta
2,403
ft2
Date
Project Address
ft2
Slab on Grade Area:
Building Permit #
Se.rq.i-o- tl-. Aano�a-Cons.u.lting
Average Ceiling Height:
(760) o9e3-6335Docuffient
ft
plan Check/Date
_Ener��rer_o
Compli ce MethodClimate
-31.5_
15
Zone
' 1
Field Cieck/Date
_0.102_ R-13
TDV Standard
Proposed
Compliance
Wall_ Wood_
_(kBtu/sf-yr) Design
Design
Margin
_R=0.0_
Space Heating 6.85
3.90
2.95
• 72_
Space Cooling 106.67
100.50
6.18
0_
Fans 14.88
13.97
0.90
_0.1.02_
Domestic Hot Water 10.73
10.73
0.00
Existing_
Pumps 0.00
0.00
0.00
-R_1.3_
Totals 139.13
129.10
10.03
Wall_ Wood_
Percent better
Building Type: [XJ Single Family ❑ Addition
❑ Multi Family [X-1 Existing + Add/Alt
Building Front Orientation: (SE)135 deg
Fuel Type: Natural Gas
Fenestration:
Area: 411 ft 2 Avg. U: 0.57
Ratio: 17.1% Avg. SHGC: 0.34
BUILDING ZONE INFORMATION
Zone Name Floor Area Volume
Total Conditioned Floor Area:
2,408
ft2
Existing Floor Area:
2,403
ft2
Raised Floor Area:
0
ft2
Slab on Grade Area:
2,408
ft2
Average Ceiling Height:
10.0
ft
Number of Dwelling Units:
1.00
-31.5_
Number of Stories:
' 1
30_
# of
Units
.Existing -EA -.0 2,408 -24,090 1._00_
OPAQUE SURFACES
_01_A4
Insulation
Act.
_0.9=A3
Type Frame
Area
U -Fac.
Cay.
Cont.
Azm.
Tilt
Roof Wood-
_2,4.03_
_0.0.4.9_
_R19_
_R=0.0_
-31.5_
1.8
Wall_ Wood_
30_
_0.102_ R-13
_R=0..0_
1.35__90
Existing_
Wall_ Wood_
9.8_
_0.1.02_
_R13_
_R=0.0_
0__9.0
_09_A3
Wall_ Wood_
• 72_
_0.1.02_
_R_13_
_R=0.0_
0_
90
Wall_ Wood_
6.9_
_0.1.02_
-R_1.3_
_R=0..0_
-0--g-0
Existing_
-Wall- Wood_
8.8_
_0.1.02_
-R_1.3_
_R=0..0_
-225_
90
Wall_ Wood_
4.9_
_0.1.02 -R_1.3_
--Z0..0_
1.35_
9.0
-Door _ None-
20_
_0.500_
_None_
_R0..0.1.35_
28=A4
9.0
Wall_ Wood_
504_
_0.1.02_ -E21.3_
_R=0..0_
-225_
90
Wall_ Wood_7.8_
_09=A3
_0..1.02_
-R-J3_
_R=0.0_
_31.5_
9.0
Wall_ Wood-
?6_
_0.1.02_
-R_1.3_ _R=0_.0_
_31.5.90
Wall_ Wood-
30_
_0.102_
-R_1.3_
_RU..0_
0_-9.0
Wall_ Wood_
70_
_0..1.02_
-R13_
__R=0...0_
_31.5_
90
-Wall Wood_
172_
_0..1.02-
_R_J3_
_R=0.0_
45__9.0
Wall_ Wood_
- 36_
_0..1.02_
-R_1.3
_R=0..0_-31.5_
9.0
Wall_ Wood_
224_
_0..102.
_R=13
_R=0..0_
-45--9.0
Wall_ Wood_
_0_
-0-102
_EZ13_
_R=0.0.
9.0.90
Wall Wood-
60_
_0.102 _EZ1.3_ X0_0_
135_
9.0
Wall_ Wood_
10_
_0..102 _R --t3- X0_0_
1.80_
9.0
Wall_ Wood_
25_
_0..102_
_R13_
_R=0.0_
-225-90
Wall Wood_
38_
_0.1.02_
_R_1.3
_R=0..0_
1.3.5__90
_Dooms None_
28_
_0...50.0_
-None-
_R=0..0_
13.5__90
Wall_ Wood_
t06_
_0.1.02.121.3_
_R=0..0_
4.5__9.0
Wall_ Wood-
x.25_
_0.102
_R_t3_
_R=0.0_
_31.5.90
Wall_ Wood-
39_
_0.1.02
_R_t3_
_R=0.0_
_31.5__9.0
Thermostat Vent
Zone Type Type Hgt. Area
Conditioned- -Setback- 2 -n/a
Gains Condition
Y / N Status JA IV Reference Location / Comments
Existing-
_01_A4
Existing±Additionlone
Existing_
_0.9=A3
Exisiing±Addition_Zone
Existing_
_0.9=A3
.Existing±Addition. _Zone
Existing-
_09=A3
Existing±Addition-Zone
Existing_
_0.9=A3
Existing±Additio.n_Zone
Existing_
0.9=A3
Exisiing±Additio.n_Zons
Existing_
_09=A3
Existing±Additionlone
Existing_
28=A4
Exis�ing±Addition_Zone
Existing_
A9=A3
Existing±Additionlone
Existing-
_09=A3
ExisJng±Addition_Zone
Removed-
_09_A3
Exis ing±Addition_Zone
Removed-
_09=A3
Existing±Addition_Zone
Existing_
_0.9=A3
.Existing±Ad.dition_Zone
Existing-
_0.9=A3
Exis=ing±Addition_Zone
Existing_
_09=A3
Existing±Addition_Zone
Existing_
_0.9=A3
Exis_ing±Additio.nZone
Existing_
_09 A3
Exisrng±Addition_Zone
Existing-
_09A3
Exis5ng±Addition-Zone
Existing_
_0.9A3
Exising±Additionlone
Existing_
_0.9=A3
Exis,9ng±Addition_Zone
Existing_
_0.9=A3
ExisJng±Add ition_Zo.ne
Existing_
28=A4
Exising±Addition_Zone
Existing_
0.9=A3
Exist ng±Addition_Zone
Existing_
_09=A3
Existng±Additionlone
New
_09=A3
Exising±Addition_Zone
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008 Paoe:3 of 10
Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R
A_ n-Add.ition_F_o—T_he_T_iT_o_Rianch.i_Res.id.e.n_ce
[Xj Single Family
1.0/28/2QQ8
Project Title
2,408
ft2
Date
Z8=9 3.0_R a n c h ola_Q.0 i n t a_D r_.—La-Q.0 i n to
n Existing + Add/Alt
Existing Floor Area:
2,403
Project Address
Building Front Orientation:
(SE) 135 deg
Building Permit #
Se.r_QC�io_H.. Garcia Consu.lti.ng
ft2
(760 )393-6335
Plan Check/Date
Docuriientation Author
2,408
Telephone
Fenestration:
_Ener_q�rP_r_o
Compli ce Method
15
Climate Zone
10.0
Field Cieck/Date
Area:
TDV Standard
Proposed
Compliance
1.00
_(kBtu/sf-yr) Design
Design
Margin .
Number of Stories:
Space Heating 6.85
3.90
2.95
Space Cooling 106.67
100.50
6.18
Fans 14.88
13.97
0.90
Area
Domestic Hot Water 10.73
10.73
0.00
Pumps 0.00
0.00
0.00
Totals 139.13
129.10
10.03
Percent better than Standard:
7.2%
Building Type:
[Xj Single Family
❑ Addition
Total Conditioned Floor Area:
2,408
ft2
❑ Multi Family
n Existing + Add/Alt
Existing Floor Area:
2,403
ft2
Building Front Orientation:
(SE) 135 deg
Raised Floor Area:
0
ft2
Fuel Type:
Natural Gas
Slab on Grade Area:
2,408
ft2
Fenestration:
Average Ceiling Height:
10.0
ft
Area:
411 ft2
Avg. U: 0.57
Number of Dwelling Units:
1.00
Ratio:
17.1% Avg. SHGC: 0.34
Number of Stories:
1
BUILDING ZONE INFORMATION
# of Thermostat
Vent
Zone Name
Floor Area Volume
Units Zone Type Type
Hgt.
Area
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay. Cont. Azm. Tilt
Wall_ Wood_ 12 _0.1.02 R -13--R--0-0-45-9.0
45__9.0
Gains Condition
Y / N Status
JA IV Reference Location / Comments
0.9=A3 Existing±Addition-Zone
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008 Paae:4 of 10
Certificate Of Compliance: Residential
(Part 2 of 4) CF -1 R
An Addition For The TiTo Bianchi Residence
Project Title
Window Overhang Left Fin Right Fin
#
10/28/2008
Date
FENESTRATION SURFACES
# Type Area U-Factorl SHGC2
True Cond.
Azm. Tilt Stat. Glazing Type
Location/
Comments
J_
2
Window-Left_(S_W___)
. Window Front
(SE)_
16.0.
30.0
_0_570_NF_RC_0-3_4 _NERC _225_
0.570 NFRC 0_34 NFRC
135
_9.0-Existing_+5.00 V=4_Low=E
90 Existing_+500 V-4 Low -E
_Existing±Additio.nZone_
Existing+Addition Zone
3
Window Left
(SW)
15.0
0.570 NFRC 0_34 NFRC
225
90 Existing _+500 V-4 Low -E
Existing+Addition Zone
4
Window Left
(SW)
17.5
0.570 NFRC 0_34 NFRC
225
90 Existing_+500 V-4 Low -E
Existing+Addition Zone
5
Window Rear
NW
30.0
0.570 NFRC 0_34 NFRC
315
90 Existing_+500 V-4 Low -E
Existing+Addition Zone
6
Window Rear
(NW)
54.0
0.570 NFRC 0_34 NFRC
315
90 Removed+500 V-4 Low -E
Existing+Addition Zone
7
8
Win ow Rear
Window Rear
W)L
(NW)
2_4_
100.0
0.570NFRC 0 34 NFRC
0.570 NFRC 0.34 NFRC
0
315
_W Removed*500 V 4 Low -E
90 Existing_+500 V-4 Low -E
Existia +Addition Zone
Existing+Addition Zone
9
10-
11
Window Right_(NE)
Window Right -WE )
Window Right (E)_
6_0
17.5
7.5
0.570 NFRC 0_34 NFRC
_ 570 NFRC � NFRC
0.570 NFRC 0_34 NFRC
45
45
90
90_ Existing_+50Q V-4 Low -E
9_0 Exist_+50Q V 4 Low -E
90 Existing -+500 V-4 Low -E
Existing+Addition Zone
Existing+Addition Zone
Existing+Addition Zone
12
Window Front
(SE)
25.0
0.570 NFRC 0_34 NFRC
135
90 Existing_+500 V-4 Low -E
Existing+Addition Zone
_1.3
14
Window F_r_ont_(.S)_
Window Right
(NE)
7.5
20.0
0,570 _NERC -0.3-4 _NF_RC 180_
0.570 NFRC 0_34 NFRC 45
_90 Existing_+50.0V-4_Low=E
90 Existing +500 V-4 Low -E
-Exisbng±Addition_Zone
Existin +Addition Zone
15
Window Rear
(NW)
16.0
0.570 NFRC 0_34 NFRC
315
90 Existing_+500 V-4 Low -E
Existing+Addition Zone
16
Window Rear
(NW)
78.6
0.570 NFRC 0_34 NFRC
315
90 New +500 V-4 Low -E
Existing+Addition Zone
17
Window Right
(NE)
24.0
0.570 NFRC 0_34 -NERC,
45
90 New +500 V-4 Low -E
Existing+Addition Zone
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168
INTERIOR AND EXTERIOR SHADING
Inside
Condition
Window Overhang Left Fin Right Fin
#
Exterior Shade Tv_pe
SHGC Hgt. Wd. Len. Hgt. LEA REA Dist. Len. Hgt. Dist. Len. Hgt
1
Bug Screen
0.76
2
Bug Screen
0.76
3
Bug Screen
0.76
4
Bug Screen
0.76
5
Bug Screen
0.76
6
Bug Screen
0.76
7
Bug Screen
0.76
8
Bug Screen
0.76
9
Bug Screen
0.76
10
Bug Screen
0.76
11
Bug Screen
0.76
12
Bug Screen
0.76
13
Bug Screen
0.76
14
Bug Screen
0.76
15
Bug Screen
0.76
16
Bug Screen
0.76
17
Bug Screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat
Inside
Condition
Location/
Type (sf) (in.) Cap.
Cond. R -Val. JA IV Reference
Status
Comments
Concrete, Heavyweight -2403 3.50 28
0_98 0 26-A1
Existing
Exis•:ing+Addition Zone / Slab on
Concrete, Heavyweight 5 3.50 28
0_98 0 26-A1
New
Ag+Addition Zone / Slab on
Gracie
PERIMETER LOSSES Insulation . Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Slab Perimeter 247 None No Insulation 26-A1 Existing Exising+Addition Zone
Slab Perimeter 13 None No Insulation 26-A1 New Exising+Addition Zone
Run Initiation Time: 10/28/08 15.50.46 Run Code: 1225237846
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number T-06-2008 Page:5 of 10
. Certificate Of Compliance : Residential (Part 3 of 4) CF -1 R
An Addition For The TiTo Bianchi Residence 10/28/2008
Project Title Date
HVAC SYSTEMS
Heating Minimum Cooling Minimum Condition Thermostat
Location Type Eff Type Eff Status Type
Existing F.A.U. Central Furnace 80% AFUE Split Air Conditioner 12.0 SEER Existing Setback
HVAC DISTRIBUTION
Location
Duct Duct Condition Ducts
Cooling Location R -Value Status Tested?
Existing F.A.U. Ducted Ducted Attic 4.2 Exis-ing No
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS
Rated
Tank
Energy
Tank Insul.
Water Heater # in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext.
Standard Gas 50 gal or Less Small Gas No Pipe Insulation 1 40,000
50
Existing 0.57
n/a n/a
Multi -Family Central Water Heating Details
Hot Water Pump
Control # HP
REMARKS
COPYRIGHT CONTENTS S.G.S. 2008
The existing DHW is adequate for existing plus Addition.
Hot Water Piping Length N Add 1/2"
In Plenum Outside Buried Insulation
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of tone California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Title/Firm: Sergio H Garcia Design Consultant
Address: 50-101 Kenmore St.
oachella CA 92236
Telephone: 60 393-6335 Lic. #:
aA
(signature) (date)
Enforcement Agency
Name: '
Title/Firm:
Address:
Telephone:
(signature) (date)
Documentation Author
Name: S.G.S.
Title/Firm: Sergio H. Garcia Consulting
Address: P.O.Box 12513
Palm DesertCA 92255
SERGIO H. GARCIA
H 05-06-591 .R 05 -06 -SM
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008 P.—r m in
Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R
An Addition For The TiTo Bianchi Residence 10/28/2008
Project Title Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local enforcement
agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the
aueyuacy ul Ulu special /usuncauun anu uucumentauvn suomiuea. .Plan Field
HIGH MASS Design - Verify Thermal Mass: 2403 sgft Exposed Slab Floor, 3.50" thick at Existing Zone
HIGH MASS Design - Verify Thermal Mass: 5 sgft Exposed Slab Floor, 3.50" thick at Addition
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC-
na ucoc .. .:.4.. .. rrr ., ,....
-rrr•..•a app -owed «s....g a..u.v. vcnncauOn meuwus anu must ue repurteu un the t.r-4n
installation certificate.
—Wiin-7
Field
I EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008 Paae:7 of 10 1
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the
-
ENFORCE -
permit application documentation.
N/A
DESIGNER
MENT
Building Envelope Measures
R§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
❑X
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
§ 150(d): Minimum R-13 raised Floor insulation in framed Floors or equivalent U -factor.
❑
❑
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
1. Masonry and factory -built fireplaces have:
a. closable metal or glass door covering the entire opening of the firebox
❑
❑
❑
b. outside air intake with damper and control, Flue damper and control
❑
❑
❑
2. No continuous burning gas pilot lights allowed.
❑
❑
❑
§ 150(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include
El
a
1-1CF-6R
Form:
§ 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. .
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑X
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
Coefficient (SHGC), and infiltration certification.
❑
❑X
❑
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑
❑
Space Conditioning, Water Heating and. Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑X
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008
Page:8 of 10
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent
compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (•) below. When this checklist is incorporated
into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory
measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not
ENFORCE -
applicable.
N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,
❑ ❑ ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh
or tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than
❑ ❑ ❑
sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and
support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause
reductions in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑ ❑ ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers.
❑ ❑ ❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑ ❑ ❑
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, -equipment
❑ ❑ ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ ❑ ❑
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
❑ ❑ ❑ . .
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ❑ ❑ '
b. Cover for outdoor pools or outdoor spas.
❑ ❑ ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑ ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ❑ ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ❑ ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are
electric and have an output frequency no less than 20 kHz.
§ 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ ❑ ❑
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑X❑ ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ Q ❑
OR are controlled by an occupant sensor(s) certified to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms,garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are
❑ ❑ ❑
controlled by an occupant sensor that complies with Section fl 9(d) that does not turn on automatically or have an
always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑ ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ ❑ ❑
same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article
680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and. 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section
119(d).
EnergyPro 4.3 by EnergySoft User Number: 6079 Job Number: T-06-2008
Page:9 of 10
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY --7
PROJECT NAME DATE
An Addition For The TiTo Bianchi Residence 10/28/2008
SYSTEM NAME FLOOR AREA
Existing F.A.U. 2,408
ENGINEERING CHECKS SYSTEM LOAD
Number of Systems
2
Heating System
Output per System
35,000
Total Output (Btuh)
70,000
Output (Btuh/sgft)
29.1
Cooling System
Output per System
35,200
Total Output (Btuh)
70,400
Total Output (Tons)
5.9
Total Output (Btuh/sgft)
29.2
Total Output (sgff/Ton)
410.5
Air System
CFM per System
855
Airflow (cfm)
1,710
Airflow (cfm/sgft)
0.71
Airflow (cfm/Ton)
291.5
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
Note: values above given at ARI conditions
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
I Sens
I CFM
Sensible
Total Adjusted System Output 58,685 0
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm
80.4 / 60.7 of 80.4 / 60.7 of
48.2 / 46.6 of
1,598
39,868
4,788
1,273
42,945
0
Outside Air
8,014
6,152
0
0
0
0
0
0
0
1710 cfm
0
0
8,0141
6,152
55,895 4,788
York H4DH036S06
58,685
0
Peak
Total Adjusted System Output 58,685 0
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm
;ATING SYSTEM PSYCHROMETRICS (Airstream Tei
26.0 of 66.6 of 66.6 of 105.1 of
Outside Air 0
0 cfm
Supply Fan Heating Coil
1710 cfm
66.6 of
of
h Return Air Ducts 4
55,249
70,000
70,000
Jan 12 am
Supply Air Ducts
101.7 of
ROOMS
70.0 of
DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures
at Time of Cooling
Peak
111.0 / 77.6 of
80.4 / 60.7 of 80.4 / 60.7 of
48.2 / 46.6 of
O
Supply Air Ducts
Outside Air
0 cfm
Supply Fan Cooling Coil
52.6 / 48.6 of
1710 cfm
36.1% R.H. ROOMS
80.4/60.7 of
76.0 / 59.1 of
Return Air Ducts
I
EnergyPro 4.3 by EnergySoft
User Number: 6079
Job Number: T-06-2008
Page:10 of 10