BRES2016-0245K
TAtT 4 4v ��
VOICE (760) 777-7125
•49
78-5 CALLE.TAMPICO.
-
FAX
FAX (760) 777-7011
LA QUINTA, CALIFORNIA 92253
DESIGN & DEVELOPMENT DEPARTMENT
(760) 777-7153
BUILDING PERMIT
Date: 10/5/2016
Application Number:
6RES2016-0245
Owner:.
Property Address:
50005 CALLE ROSARITA
JIM VONDERHAAR
APN:
658250041
50005 CALLE ROSA,RITO
.Application Description:
M&M VONDERHAAR / REMODEL ENCLOSURE
LA QUINTA, CA 92253
�'rJJJ w
C:Z)
Property Zoning:
) �?
Application Valuation:
$15,000.00
«"°
® u_ o
Applicant:
Contractor:
v >= o
ROB PITCHFORD
SURF TO SAND GENERAL CONTRACTORS
1NC U
77622 COUNTRY CLUB
74355 PAROSELLAST
s
PALM DESERT, CA 92211
PALM DESERT, CA 92260
(760)218-3535
Llc. No.: 915143
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under"penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: B License No.: 915143
Date: Contractor:
OWNER -BUILDER DECLARATION
f hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031:5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business"and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
(_) I am exempt under Sec. B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Na
Lender's
WORKER'S COMPENSAT90N DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 370C of the Labor Code, for the performance
of the work for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and policy number are:
Carrier: EXEMPT Policy Number: _
I certify that in the performance ofthe work for which this permit is issued, I
shall not employ any person in any manner so as -to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Date:
Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSANDDOLLARS ($100,MO). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION. 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is perfowned under or pursuant to any permit
issued as a result of this application , the ow,-ier, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless t1he City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to can-ellation.
I certify that I have read this application anc state that the above information is correct.
I agree to comply with all city and county o dinances and state laws relating to building
construction, and hereby authorize represe natives of this city to enter upon the
above-mentioned property for inspection purposes.
Date: Signature (Applieint or Agent):
R
Date: .10/5/2016
App4ation Number:
BRES2016-0245
Owner:.
Property Address:
50005 CALLE ROSARITA
JIM VONDERHAAR
APN:
658250041
50005 CALLE ROSAFITO
Application Description:
M&M VONDERHAAR / REMODEL ENCLOSURE
LA QUINTA, CA 92253
Property Zoning: .
Application Valuation:
$15,000.00
Applicant:
'Contractor:
ROB PITCHFORD
SURF TO SAND GEN ERAL CONTRACTORS INC
77622 COUNTRY CLUB
74355.PAROSELLA ST
PALM DESERT, CA 92211
.
PALM DESERT, CA 92260
(760)218-3535
Llc. No.: 915143
Detail: ATRIUM ENCLOSURE
PER 2013 CRC CODES
•� DESCRIPTION
ACCOUNT QTY
AMOUNT
ADDITION, FIRST 100 SF
101-0000-42400• 0
$120.83
DESCRIPTION
ACCOUNT QTY
AMOUNT
ADDITION, FIRST 100 SF PC
101-0000-42600 0
$171.14
RESIDENTIAL, FIRST 1,000SF, PC
Total Paid for ADDITION:
$291.97
DESCRIPTION
ACCOUNT
QTY
AMOUNT
HOURLY CHARGE - YES ADMINISTRATIVE STAFF
101-0000-42600
0.25
$10.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
HOURLY CHARGE - YES STRUCTURAL PLAN REVIEW ENGINEER
101-0000-42600
1
$95.00
Total Paid for BLDG CITY STAFF - PER HOUR:
$105.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
BSAS SB1473 FEE
101-0000-20306
0
$1.00
Total Paid for
BUILDING STANDARDS ADMINISTRATIOM BSA:
$1.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
RESIDENTIAL, FIRST 1,000SF
101-0000-42403
0
$145.03
DESCRIPTION
ACCOUNT
QTY
AMOUNT
RESIDENTIAL, FIRST 1,000SF, PC
101-0000-42600
0
$47.86
Total Paid for ELECTRICAL - NEW CONSTRUCTION: $192.89
DESCRIPTION
ACCOUNT
QTY
AMOUNT
APPLIANCE REPAIR/ALTERATION
101-0000-42402
0
$12.09
DESCRIPTION
ACCOUNT
QTY
AMOUNT
APPLIANCE REPAIR/ALTERATION PC
101-0000-42600
0
$4.83
Total Paid for MECHANICAL: $16.92
DESCRIPTION
ACCOUNT
QTY
AMOUNT
SMI - RESIDENTIAL
101-0000-20308
0
$1.95
Total Paid for STRONG MOTION INSTRUMENTATIOM SMI: $1.95
Iain ##
City of La Quinta
Building t3£ Safety Division
Permit It 78-495 Calle Tampico
La Quinta, CA 92253 : (760) 777-7012
54.es 2 ��,-Oa is Building Permit Application and Tracking Sheet
Project Address:-OOS {�.C� Owner's Name'V
A. P. Number: &IC -t3 2S0 01'I
Address: �Q —00S//���"'F�'
Legal Description: �� ~ 1 I
City, ST, Zip: Q it h. r — 1"A
1 A
Contractor. N
Telephone
Address:
Project Description':
City, ST, Zip:
n
Telephone:
State Lie. #.:
City Lie. #:
yDesigner:'�O�
Address: / 74
City, ST, Zip: vt
7b�42
r.
CanTelephone: truettnTYO ccu an cY. :
Type:
Lie.
DemoState
Pro ectecircle one • New Add'n Alter'.Repair
Name of Contact Person: 6� `�
Sq. Ft.: #Stories:
Units:
Telephone # of Contact Person: 0,03 56
0C.
Estimated Value of Project: � ,J
APPLICANT: DO NOT WRITE BELOW THIS LINE
# Submittal Req'd Rec'd . TRACKING . PERMIT FEES
Plan Sets
Plan Check submitted
Item
ount
Structural Cafes.
Reviewed, ready for corrections
Plan Check Deposit
Truss Calcs.
Called Contact Person'
Plan Check aUnce.
Title 24 Calcs.
Plans picked up
C ruction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
2"' Review, ready foreorreclionsfissu
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
II.O.A. Approval
Plansubmitled
Grading
IN-I-IOUSE:-`�
Reyiew, ready for corrcctions(ssue
Developer Imp nct Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees,
Total Permit fees
b(=
October 3, 2016
Dear Mr. and Mrs Vonderhaar.
The Association's Architectural Committee has Approved your atrium enclosure _at
50006'Calle Rosarita. This project is authorized per your Change Application
receive 6 and clarifications you; provided in'.yQuv-eptember 3.O:email:.
Since your property is a. PUD, rather than a condo, :the Association only needs 1W
approve::extehor changes,;poor our'governing documents.
Would . ou lease not
y p rfy us when~your project has been eompleted? We can then
inspect the roof area,;and process,a refund ofyour deposit,
Thanks very much ;foryour cooperation:.
Sincerely;
C
Dave -Scott
, CAM.
Community Association Manager
760..777.1621 onsite office
www.src.hoa.com
dave.scott@all ertmgt eom
RECH®
OCT 05 2016
CITY OF LA QUINTA
COMMUNITY DEVELOPMENT
49991, Eisenhower
ua Quih4 C06mia
(760)777 762'1
SRC Tax:<��o) spa a is.
tifailing Address:
:SANTA ROSA COVE ASSOCIATION �,m BCoA 9 5
.
. .
.^
CITY- OF LA GU 0 TSV K CONTRACTOR
JOB
W) ADDRESS,
PER
'This form shall be posted on the Job with the Building Inspection- Card at all times in a conspicuous place. - - '- - Only persons appearing dn-this list ortheir employees are authorized towork
0nthis job. Any changes tothis list must beapproved bythe Building Division prior tocommencement. ofvvork` Fai|uh*t000. �\yvviUresu�inaotoppageofvvorkand/or the voidance
' v ' `
8f buildingpermit. For
ornach applicable trade, aUintorrnationrequested below must be oornp|etod by applicant. "On File" is not an acceptable response.
Company Name
Classification
License Number
Exp Date
Carrier Name
Policy Number,
E xp. Date
Lice nse Number
Exp. Date
(e.g. A, B, C-8)
(xxxxxx)
(xxlxx/xx)
(e.g. State Fund, CalComp)
(Format Varie�)
(xxlxx/xx)
(xxxx)'
�
.�
.07
�
:ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1 R -PRF -01
3roject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016 Page 1 of E
'alcuiation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xml
GENERAL INFORMATION
Pro o
8
I nn r— enle IP n
NA
01 Project Name Remodeled Residence
Space Cooling
-
02 Calculation Description -Title 24 Analysis
D1.
o
0.3%
03 Project Location 50-005 Calle Rosa Rita
0.00
0.00
04 City La Quinta
05
Standards Version Compliance 2015
06 Zip Code 92253
07
Compliance Manager Version BEMCmpMgr 2013-4 (744)
08 Climate Zone CZ15.
09
Software Version EnergyPro 6.6
10 Building Type Single Family
11
Front Orientation (deg/Cardinal) 95
12 Project Scope Addition and/or Alteration
13
Number of Dwelling Units 1
14 Total Cond. Floor Area (ft2) 1739
15
«- Number of Zones 2 °
16 Slab Area (ft2) 1739
17
Number of Stories 1
18 Addition Cond. Floor Aiea 79
19
Natural Gas Available Yes
20 Addition Slab Area (ft,)' 79•
1 21 1
Glazing Percentage (%) 10.1%
COMPLIANCE RESULTS
01 Building Complies wltti Computer.Berformance"f °--, � " f77' I" � (-' (`` 1 • . -,�
ys f.
02 This building Incorporates featur"Ahat reiqf uire feidtesthing +}and/orlv.ersif'ic8tlon[ by acertfedHERS aerj epr t
he supervision of a CEC-approved HERS provider.
,
03 This building Incorporates one or more Special Features shown below .
a ..
a
ENERGY USE SUMMARY
04 05 06 07 08
Energy Use (kTDV/tt2-yr) _
Space Heating
Standard Design
2.45
Pro o
8
I nn r— enle IP n
NA
Percent Improvement
25.7%
Space Cooling
183.03
182.lvu
D1.
o
0.3%
IAO Ventilation
0.00
0.00
r E U -N00
0.0%
Water Heating
12.70
12.5
CTI O jet 7
1.3%
Photovoltaic Offset
----
00
0.00
----
Compliance Energy Total +
198.18
196.
1.44
0.7%
tegistration Number: 216-A0302451B-000000000-0000 Registration Date/Time: 2016-09-19 18:47:40 HERS Provider: CaICERTS in(
;A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-19 18:41:43
U
'ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
3roject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016
:alculation Description: Title 24 Analysis
Input File Name: Vonderhaar-Pitchford-16.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Insulation below roof deck
CF1 R -PRF -01
Page 2 of li
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
Drovided in the building components tables below.
Building -level Verifications:
• High Quality Insulation Installation (QII)
Cooling System Verifications:
• ..None --
HVAC Distribution System Verifications:'
• -- None --
Domestic Hot Water System Verifications:
-- None --
ENERGY DESIGN RATING
This is the sum of the annual TDV energy consumption -for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
in -site renewable energy system. , I I A i t )t , { l� -"
i / Reference Energy Used Ifs Energy Design Rating Margin Percent Improvement
Total Energy (kTDV/f2-yr)*�r '' f ' `248.66 ' I �" ` t=1 247.22 1.44 0.6%
i/
includes calculated Appliances and Miscellaneous Energy Use (AM
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Project Name
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
Cooling Systems
Number of Water
Heating Systems
Remodeled Residence
1739
1
3
2
1
1
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
residence
Conditioned
HVAC1
1660
9
DHW Sys 1
addition
Conditioned
HVAC1
79
9
DHW Sys 1
tegistration Number: 216-A0302451B-000000000-0000 Registration Date/Time: 2016-09-19 18:47:40 HERS Provider: CaICERTS in(
:A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-19 18:41:43
fy.
'.ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Droject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016
'.alculation Description: Title 24 Analysis
OPAQUE SURFACES
Input File Name: Vonderhaar-Pitchford-16.xm1
CF1 R -PRF -01
Page 3 of F
01
02
03
04
05
06
07
08
09
10
Name
Zone
Construction
Azimuth
Orientation
Gross Area (tt2)
Window & Door
Area (ft2)
Tilt
(deg)
Status
Verified
Existing
Condition
5d Wall ex
residence
R-13 Wall + 21
5
Right
826
77.4
90
Existing
No
95d Wall ex
residence
R-13 Wall + 21
95
Front
628
116
90
Existing
No
140d Wall ex
residence
R-13 Wall + 21
140
45
192
20
90
Existing
No
185d Wall ex
residence
R-13 Wall + 21
185
Left
826
0
90
Existing
No
275d Wall ex
residence
R-13 Wall + 21
275
Back
628
0
90
Existing
No
Roof 2
residence
Defaul: 1978 to present
1660
Existing
No
185d Wall
addition
R-13 Wall + 21
185
Left
96
0
90
Existing
No
Roof 3
additiori ,�
R-38 Roof Attic
69.6
New
N/A
OPAQUE SURFACES–Cathedral Cellingsi�
01
b2
03___ -
X04—
05
06
06
07
08
09
10
11
12
13
Name
Zone
k!
or�rlentatl
i ni
�n
`Area
(tt2) _
—Skylight
Area (tt2)I(x
ffF
Roof Rise
In 1,2)r.
Roorf
,Pitch
Roof-
'Til deg)
Roof
Reflectan
ce
Roof
Emittance
Framin
g
Factor
Status
Verified
Existing
Condifion
Roof
additiori
R 38;rRoof Attic1
», specify
9,59.4
�--, 3 011a
0.25
*,14.04„,
0.1
0.85
0.1
New
N/A
ATTIC
01
02
03
04
05
06
07
08
09
10
Radiant
Statu
Verified Existing
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Barrier
Cool Roof
s
Condition
Attic residence
Attic Roofresidence
Ventilated
3
0.1
0.85
No
No
Engti
N0
Attic addition
Attic Roofaddition
Ventilated
1 3
1 0.1
1 0.85
1 Yes
I No
New
No
tegistration Number: 216-AO302451B-000000000-0000
. :A Building Energy Efficiency Standards = 2013 Residential Compliance
Registration Date/Time: 2016-09.19 18:47:40
Report Version - CF1R-04072016-744
HERS Provider: CaICERTS in(
Report Generated at: 2016-09-19 18:41:43
PPP7RTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1 R -PRF -01
zroject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016 Page 4 of I
t�
f'
;alculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xm1
rvnvuurr�
01
02
03
04
05
06
07
08
09
10
11
Name
Surface (Orientation -Azimuth)
Width(ft)
Height (ft)
Multlplie
r
Area (ftp
U -factor
SHGC
Exterior Shading
Status
Verified
Existing
Condition
ex 2.5x6
5d Wall ex (Right -5)
1
15.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 2.5x6 2
5d Wall ex (Right -5)
----
1
15.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x6
5d Wall ex (Right -5)
----
1
18.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x6 2
5d Wall ex (Right -5)
----
----
1
18.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x3.8
5d Wall ex (Right -5)
----
----
1
11.4
0.71
0.60
Insect Screen (default)
Existing
No
ex 4x5
95d Wall ex (Front -95)
1
20.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 6x8
95d Wall ex (Front -95)
----
----
1
48.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 4x5 2
140d Wallrez;(- specify --140)
----
----
1
20.0
0.71
0.60
Insect Screen (default)
Existing
No
Skylight
Roof? -,specify --270)
----
----
1
9.4
0.43
0.23
None
New
N/A
DOORS
f �.,���'y ��•;
01 03 r(' * W 04 a . 05 06
Name Side of Building,11 .1Area ( f1 2) U iacto� Status Verified Existing Condition
t�. " �. �: 1; - r 4 "is 8> '' ,
Door ,f 95d 1Nall ex 48.0 - 0.50 - Existing No
tegistration Number: 216-AO302451B-000000000-0000 Registration Date/Time: 2016-09-1918:47:40
:A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFSR-04072016-744
HERS Provider: CaICERTS inc
Report Generated at: 2016-09-19 18:41:43
.I.
'.ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1 R -PRF -01
3roject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016 Page 5 of I
.'alculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xml
OPAQUE SURFACE CONSTRUCTIONS
'01
02
03
04
05
06
07
08
09
Name
Zone
Total Cavity
Winter Design
Edge Insul. R -value
Construction Name
Surface Type
Construction Type
Framing
R -value
U -value
Assembly Layers
175
None
0.8
No
Existing
No
• Cavity/Frame: no Insul. /2x4 Top Chrd
t
79
14
2x4 Top Chord of Roof Truss @ 24
0.8
No
Roof Deck: Wood Siding/sheathing/decking
Attic Roofresidence
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
Defaul: 1978 to present
attic)
Wood Framed Ceiling
2x4 @ 16 in. O.C.
R 11
0.083
Over Floor Joists: R-1.9 insul.
• Inside Finish: Gypsum Board
• Sheathing/ Insulation: R21 Sheathing
• Cavity/Frame: R -13/2x4
• Exterior Finish: Wood
R-13 Wall + 21
Exterior Walls A
Wood Framed Wall
2x4 @ 16 in. O.C.
R 13
0.030
Siding/sheathing/decking
Under Roof Joists: insul.
•Cavity /Frame: R-13.03.0 / / 2x4 Top Chrd
Attic
.
w
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Roofaddition
Attic Roofs
Wood Framed Ceiling •
in. O.C.
R 19
0.052
Roofing: Light Roof (Asphalt Shingle)
Ceilings (below
A
TC4�Cavity/Frame:
Inside Finish: Gypsum Board
R-9.1 /2x4
R-38 Roof Attic
"!
Wood Framed Ceiling,
2x4 @'16 in O.C.
R
0.049
Over Floor Joists: R-9.9 insul.
atticy
19
Inside Finish: Gypsum Board
H
F1 S
f :„
Sheathing /Insulation: R19Sheathing
• Cavity/Frame: R -19/2x4
• Roof Deck: Wood Siding/sheathing/decking
R-38 Roof Atticl
Cathedral Ceilings
Wood Framed Ceiling
2x4 @ 16 in. O.C.
R 19
0.027
• Roofing: Light Roof (Asphalt Shingle)
SLAB FLOORS
01
02
03
04
05
06
07
08
09
Name
Zone
Area (tt2)
Perimeter
(ft)
Edge Insul. R -value
Carpeted
Fraction
Heated
Status
Verified
Existing
Condition
Covered Slab
residence
1660
175
None
0.8
No
Existing
No
Covered Slab 2
addition
79
14
None
0.8
No
New
No
BUILDING ENVELOPE - HERS VERIFICATION
01 02 03 04
Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage CFM50
Required Not Required Not Required ---
Registration Number: 216-A0302451B-000000000-0000 Registration Date/Time: 2016-09-19 18:47:40 HERS Provider: CaICERTS in(
:A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-19 18:41:43
'ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
2roject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016
alculation Description: Title 24 Analysis
(NATER HEATING SYSTEMS
Input File Name: Vonderhaar-Pitchford-16.xml
CF1 R -PRF -01
Page 6 of f
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Solar
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50
Number of
Fraction
0
Verified Existing
Name
System Type
Distribution Type
Water Heater
Heaters
(°/C)
Status
Condition
DHW Sys 1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
Annual
Existing
No
(NATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50
0.61 EF
40000-Btu/hr
0
0
�r
(NATER HEATING - HERS VERIFICATION
01
_ _ _ % 102.
03
04
05
06
07
Name
�- --r''
Pipe Insulation
Per alleITIping :y
'n/a
, Compact Distributlon
Point -of Use
Recirculation with
Manual Control .
Recirculation with
Sensor Control
DHW Sys i
f f ,,•�'n/aY
k 1 ?
` Nn/a
'� ,fin/a
n/a
n/a
Vo it It 0
SPACE CONDITIONING SYSTEMS �f� t -j f= n �c IIS r-,. 1 c
01
02
X03 � a —
" - " 04
05'
06 �
07
08
09
Heating System
Cooling System
Distribution
Fan
Floor Area
Verified Existing
Name
System Type
Name Ducted
Name Ducted
System
System
Served
Status
Condition
HVAC1
Other Heating and
Heating
Yes
Cooling
Yes
Air Distribution
HVAC Fan
1739
Existing
No
Cooling System
Component 1
Component 1
System 1
1
HVAC - HEATING SYSTEMS
tegistration Number: 216-AO302451B-000000000-0000
:A Building Energy Efficiency Standards - 2013 Residential Compliance
Registration Date/Time: 2016-09-19 18:47:40
Report Version - CF1R-04072016-744
HERS Provider: CaICERTS in(
Report Generated at: 2016-09-19 18:41:43
:ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1 R -PRF -01
•' 3roject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016 Page 7 of f
;alculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xml
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
07
08
Efticlency
10
Multl-speed
ry--IAQ CFM IAO Fan Type
�.� Ks - .•, t
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10
12
No
No
N/A
Location
system
Status
Condition
-
Air Distribution
System
Ducts located in attic
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
08
09
10
Name
ry--IAQ CFM IAO Fan Type
�.� Ks - .•, t
IAQ Recovery Effectiveness(%)
Insulation
Supply Duct
Return Duct
. Default
If 0
Verified Existing
HERS
Name
Type
Duct Leakage
R -value
Location
Location
Bypass Duct
Status
Condition
Verification
Air Distribution
System
Ducts located in attic
Existing (not
6.0
Attic
Attic
None
Existing
No
N/A
1
61
A specified)
1
IAQ (Indoor Air Quality) FANS
01
02
03
04
05
Name
ry--IAQ CFM IAO Fan Type
�.� Ks - .•, t
IAQ Recovery Effectiveness(%)
HERS Verification
SFam IAQVentRpt
) f �/0
. Default
If 0
Not Required
II M
#1 it 1I
COOLING VENTILATION
`' `"' x
Vis. 4
01
J�-
02
1 LJ (03 M
04
Name
Cooling Vent CFM
Cooling Vent Watts/CFM
Number of Fans
WH Fan 1
61
0.52459
1
tegistration Number: 216-AO302451 B-000000000-0000 Registration Date/Time: 2016-09-1918:47:40 HERS Provider: CaICERTS in(
:A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-19 18:41:43
:ERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD CF1 R -PRF -01
Droject Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016 Page 8 of I
'.alculatlon Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xm1
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Designer Signature:
%rrlri.�caZ?i
Tim Scott
Vit.L
company:
Signature Date:
Scott Design and Title 24, Inc.
2016-09-19 18:47:40
4ddress:
CEA/HERS Certification Identification (If applicable):
77085 Michigan Drive
'ity/State2ip:
Phone:
Palm Desert, CA 92211
760-200-4780
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations. 1 ��
3. The building design features or system design`featur�wde tified, on-this`Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications subm lied -to the enforcement.agency,for approval,with,this_building permit application.
3esponsible Designer Name:LResponsible
Designer Signature:
%rrlri.�caZ?i
Tim Scott
Vit.L
!
'1
-ompany:
Date -Signed: a. '�
2016-09-191 8 7:40
Scott Design and Title 24, Inc.
4ddress:
License:
77085 Michigan Drive
na
Dity/State2ip:
Phone:
Palm Desert, CA 92211
760-200-4780
Digitally signed by Ca10ERTS. This digital signature is provided in order to secure the content of this registered document, and in no way implies Registration
Drovider responsibility for the accuracy of the information.
tegistration Number: 216-A0302451 B-000000000-0000 Registration Date/Time: 2016-09-19 18:47:40 HERS Provider: CaICERTS in(
:A Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-19 18:41:43
UITY OF LOS ANGELES
BOARD OF CALIFORNIA DEPARTMENT OF
BUILDING AND SAFETY BUILDING AND SAFETY
COMMISSIONERS DF LOS qn 201 NORTH FIGUEROA STREET
_ LOS ANGELES, CA 90012
` F
• I I I I I �_ '.'�
VAN AMBATIELOS —
INTERIM PRESIDENT
R.aYMOND S. CHAN, C.E., S.E.
E. FELICIA BRANNON GENERAL MANAGER
JOSELYN GEAGA-ROSENTHAL ERIC GARCETTI
GEORGE HOVAGUIMIAN MAYOR FRANK BUSH
JAVIER NUNEZ EXECUTIVE OFFICER
VELUX America Inc. RESEARCH REPORT: 25885
SKY -GPM (CSI #08 62 00)
PO Box 5001
Greenwood, SC 29648-5001 ,
Expires: December 1, 2017
Attn: Roger LeBrun Issued Date: December 1, 2015
(864) 941-4828 Code: 2014 LAEC
GENERAL APPROVAL —Renewal of General Approval - VELUX® Skylights and VELUX
SUN TUNNELTM Skylights
DETAILS
VELUX® Skylights are aluminum, aluminum -clad wood, or aluminum -clad rigid PVC framed
double -pane glass -glazed skylights in fixed and vented configurations. Vented skylights are
available in manually and electrically operated versions. Fixed skylights inclLde Models QPF,
FCM and FS. Vented, manually operated skylights include Models VS and VCM. Vented,
electrically operated skylights include models VCE, VSE and VSS, VCS Solar variants. All
covered skylight models are supplied with 17.2mm (11/16") tempered -over -laminated (Type 04
or Type 08) insulating glass. Each includes Lo -E3 -coating on the tempered transparent exterior
pane. The laminated interior pane is composed of two sheets of clear heat -strengthened glass .
with a 0.030" PVB interlayer. The interior and exterior panes are separated by an argon -filled
space, sealed by a desiccant -filled stainless steel spacer system. Type 06 glasE units are identical
to Type 04 except they contain a triple layer of 0.030" interlayer plies. Type C8 glass units are
identical to Type 04 and include a white coating on the interlayer. Type 9994 glass units are
identical to Type 04 and include a hard -coat Lo -E coating on the room -side surface:
VELUX SUN TUNNELTIMI Skylights are tubular daylighting de ic@/
TCR and TMF use an exterior coated, galvanized steel roof fla ' 6 I li
(118) acrylic dome unit and an interior ceiling ring. Model T Ruse a ar
tempered glass mounted between a,very low profile thermopl tic fr
roof flashing. The TGR/TGF series consist of a low profile fl shing
deck, projects 4" upward, and aligns the dome unit to be par At�the roof deck.
TMR/TMF series consist of a pitched flashing that mounts to rooer anc
upward on the.downward roof slope and allows the tunnel opening to e
02
RR 25885
Page 1 of 5
f�
' V ELUA America Inc.
Re: VELUX® Skylights and VELUX SUN TUNNELTM Skylights
the adjacent roof. All models are connected to two interior acrylic diffuser layers joined by a
highly reflective flexible (..F) or rigid (..R) tunnel (tube).
The approval is subject to the following conditions:
1. The skylights shall be installed in accordance with Sections 2405 and 2610 of the 2014
City of Los Angeles Building Code and the manufacturer's published installation
instruction. The manufacturer's installation instruction shall be available on the job site
during installation.
2. The allowable negative and positive loads for the skylights areas set forth in Table 1 and
Table 2.
3. Flashing must comply with Section 1503.2 of the 2014 City of Los Angeles Building
Code.
4. Skylights shall be installed on roofs with slope 3:12 and steeper.
5. Skylights shall be labeled with the name of the manufacturer, City of Los Angeles
Research Report No., the product designation, and the performance grade ratings as
specified in AAMA/WDMA/CSA 101/l.S.2/A440.
6. Electrical and mechanical components installed in the unit skylight models listed in
Tables 1 and 2 are outside the scope of this approval letter and shall comply with the Los
Angeles Electrical and Mechanical Code, respectively.
DISCUSSION
The report is in compliance with the 2014 City of Los Angeles Building Code.
The polypropylene pivot and intermediate rings, ASA sash for the TLR, and acrylic dome plastic
materials are classified as CC2 per Chapter 26 of the 2014 City of Los Angeles Building Code.
The clear, frosted and crepe diffusers meet the requirements of light transmitting plastics per
Section 2606.4 of the 2014 City of Los Angeles Building Code. The two .layers of diffuser are
installed so that the crepe diffuser is on top of the frosted diffuser. The thicknesses of the
diffusers are 1.5mm (0.059') and 3mm (0.118) for crepe and frosted diffusers respectively.
The standard sizes of the covered products are shown in the following table. (Custom sizes of
the glass skylights are also covered, if dimensions do not exceed tho e shown in e a e. o
C1W OF LA 0UINTA
The approval is based on tests in accordance with AAMA/WDMA/CSA-)b0L0 !0- A49@\@Y fY'DEPT.
material tests in accordance with chapters 24 and 26 of the Los Angeles BufidPgPfq0VE D
FOWCONSTRUCTION
DATE BY
RR 25885
n.....,, r► -.Cc
V ELUA America Inc. ,
Re: VELUX® Skylights and VELUX SUN TUNNELTM Skylights -
Addressee to whom this Research Report is issued is responsible for providing zopies of it,
complete with any attachments indicated, to architects, engineers and builders using items ;
approved herein in design or construction which must be approved by Department of Building
and Safety Engineers and Inspectors. -
This general approval is only valid where an engineer and/or inspector of this Department have
determined that all conditions of this Approval have been met in the project in -which it is to be ,
used.
QUAN NGHIEM, Chief - -
Engineering Research Section
201 N. Figueroa St., Room 880
Los Angeles, CA 90012
Phone - 213-202-9812
Fax - 213-202-9943
t DE F•
RR25885
R11/24/2015
TLB 1500255
2405.5, 2610
. a -
CITY OF LA QUINTA
BUILDING & SAFETY DEPT.
APPROVED
• FOR CONSTRUCTION
DATE BY
-------------
RR 25885
n Ir c
V hLUA Amenca Inc.
Re: VELUX® Skylights and VELUX SUN TUNNELTM Skylights
Table 1 - VELUX® Skylights
Description /
Glass Skylight Outside Dimensions (in.)
Performance Grades (psf)
Hallmark Number
Model / Size Codes Width Height
Downward
Uplift
FCM 4646 51 1/4 51 1/4
FCM 3434 39 1/4 391/4
"a
FCM 3046 (or 4630) 35 1/4 51 1/4
c
FCM 3030 35 1/4 27 1/4
E
FCM 2246 (or 4622) 27 1/4 75 1/4
426-H-671.00
175
170
FCM 2234 (or 3422) 27 1/4 51 1/4
U
FCM 2230 or 3022) 271/4 39 1/4
FCM 2222 271/4 35 1/4
b
as
k
FCM 1446 (or 4614) 27 1/4 27 1/4
FCM 1430 (or 3014) 19 1/4 51 1/4
426-H-671.01
FCM 2270 (or 7022) 19 1/4 35 1/4
110
95
FS S06 443/4 461/4
426-H-675.00
100
55
FS S01 443/4 273/8
FS M08 309/16 5415/16
"a
°r
FS M06 309/16 461/4
c
FS M04 309/16 383/8
E
FS M02 309/16 30 1/2
FS D26 23 1/4 237/16
q
426-H-675.01
285
80
FS D06 23 1/4 461/4
FS C08 21 1/2 54 15/16
FS C06 21 1/2 461/4
FS C04 21 1/2 383/8
FS C01 21 1/2 273/8
FS A06 15 1/4 461/4
QPF 4646 481/4 481/4
QPF 3046 or 4630 321/4 481/4
QPF 3030 321/4 32 1/4
?; w
426-H-668.01
210
105
pF 2246 or 4622 24 1/4 48 1/4
a
QPF 2234 (or 3422) 241/4 36 1/4
QPF 2222 t 241/4 241/4
VCE / VCM / VCS 4646 51 1/4 51 1/4
a
VCE / VCM / VCS 3046 35 1/4 51 1/4
VCE / VCM / VCS 3030 35 1/4 35 1/4
o
v E
426-H-696.01
165
40
VCE / VCM / VCS 2246 27 1/4 51 1/4
VCE / VCM / VCS 2234 27 1/4 391/4
VCE / VCM / VCS 2222 27 1/4 27 1/4
U
VSE / VSS / VS S06 443/4 461/4
426-H-679.00
235
50
VSE / VSS / VS S01 443/4 273/8
PC
VSE / VSS / VS M08 309/16 54 15/16
-�/
OF
n
VSE / VSS / VS M06 309/16 46 1/4
VSE / VSS / VS M04 309/16 383/8
CITY 1
Ql
>
426-H-679.01
BU19-®1NG 8
SANETY
VSE / VSS / VS C08 21 1/2 5415/16
VSE / VSS / VS C06 21 1/2 46 1/4
G
APPROVE
VSE /VSS / VS C04 21 1/2 383/8
FOR CO
STRUC
VSE / VSS./ VS C01 21 1/2 273/8
DATE BY
I NTA
DEPT.
ION
RR 25885
'n___ n _CC
V tL U A Amenca Inc.
Re: VELUX® Skylights and VELUX SUN TUNNEUM Skylights
Table 2 - VELUX SUN TUNNEUM Skylights
Hallmark
Number
SUN TUNNEL TDD
Model /Size Codes
Outside Dimension (in.)
Performance Grades (psf)
Exterior
Tunnel
Downward
Uplift
Curb -mounted, Rigid Tunnel, Low -Slope Roof, Round Double Diffuser
426-H-665.00
TCR 022 P1
25 5/8 dia.
21 7/16 dia.
150
150
Curb -mounted; Rigid Tunnel, Low -Slope Roof, Square Single Diffuser
426-H-665.01
TCR 022 P1
25 5/8 dia.
21 7/16 dia.
150
150
Low -Profile and Very Low -Profile Self -Flashed, Rigid Tunnel, High -Slope Roof
426-H-69.1.00
TGR 014
17 9/16 dia.
13 5/8 dia.
250
125
TGR 010
13 7/16 dia.
9 1/2 dia.
426-H-693.00
TLR 014
18 1/4 square
13 5/8 dia.
250
170
Low -Profile Self -Flashed, Flexible Tunnel, High -Slope Roof
426-H-692.00 _
TGF 021 25 5/8 dia. 20 9/16 dia.
250
40
TGF 014 ' 17 9/16 dia. 141/1 dia.
Pitched -Profile Self -Flashed, Rigid Tunnel, High -Slope Roof
426-H-689.00
TMR 014 17 9/16 dia. 13 5/8 dia.
250
85
TMR 010 13 7/16 dia. 9 1/2 dia.
Pitched -Profile Self -Flashed, Flexible Tunnel, High -Slope Roof
426-H-690.00
TMF 014 T-7-1
17 9/16 dia.
14 1/8 dia.
250
80
CITY of LA QuINTA
BUILDICdG & SAFEN ®PT.
�p P ®V
FJ
ON
FOR CON
DATE_ ----ABY
RR 25885
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Vonderhaar Residence
50-005 Calle Rosa Rita
La Quinta, CA 92253
Project Designer:
Robert A. Pitchford Design and Drafting
77-622 Country Club STE O
Palm Desert, CA 92211 -
(760) 346-2856
Report Prepared by:
Tim Scott
Scott Design and Title 24, Inc,
74-818 Velie Way, Suite 8
Palm Desert, CA 92260
(760) 200-4780
INTA
BUILDING & SAFETY DEPT.
AppROVE®PT.
Jo Nur>fr15&CONSTRUCTI
DATEY
Date:
9/19/2016
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC—www.energysoft.com.
Energ Pro 6.7 by Energ Soft User Number. 6712 ID:
a
TABLE OF CONTENTS
Cover P
� age 1
Table of Contents 2
Form CF -1 R -PRF -01-E Certificate of Compliance 3
Form RMS -1 Residential Measures Summary 11
Form MF -1 R Mandatory Measures Summary 12
HVAC System Heating and Cooling Loads Summary 16
Room Load Summary 17
Room Heating Peak Loads '18
Room Cooling Peak Loads 20
EnergyPro 6.7 by EnergySoft Job Number. ID: User Number: 6712
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis
Input File Name: Vonderhaar-Pitchford-16.xml
CF1 R -PRF -01
Page 1 of 8
GENERAL INFORMATION
ENERGY USE SUMMARY
01
Project Name Remodeled Residence
04
05j
02
Calculation Description Title 24 Analysis
08
Energy Use (kTDV/ft2-yr)
03
Project Location 50-005 Calle Rosa Rita
Compliance Margin
Percent Improvement
04
City La Quinta
05
Standards Version Compliance 2015
06
Zip Code 92253
07
Compliance Manager Version BEMCmpMgr 2013-4 (744)
08
Climate Zone CZ15
09
Software Version EnergyPro 6.6
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 95
12
Project Scope Addition and/or Alteration
13 tk*
Number of Dwelling Units 1
14
Total Cond. Floor Area (ft2) 1739
15 'to
Number of Zones 2
16
Slab Area (ft) 1739
174,(V
Number of Stories 1
18
Addition Cond. Floor Area 79
�1�9
Natural Gas Available Yes
20
Addition Slab Area (ft) 79
r�
Glazing Percentage (%) 10.1%
AW
COMPLIANCE RESULTS ttl
01 Building Complies with Computer Performance
02 This building Incorporates features that require field testing and/or verification by a certified HERS rater under the supervision of a CEC-approved HERS provider.
03 This building Incorporates one or more Special Features shovX-below
�1W
Registration Number: 11%i, Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-1918:41:34
ENERGY USE SUMMARY
04
05j
06
07
08
Energy Use (kTDV/ft2-yr)
Sta#rd Design
Proposed Design
Compliance Margin
Percent Improvement
Space Heating
2.45
1.82
0.63
25.7%
Space Cooling
^ 183.03
182.39
0.64
0.3%
IAO Ventilation
0.00
0.00
0.00
0.0%
Water Heating`
12.70
12.53
0.17
1.3%
Photovoltaic Offset
0.00
0.00
Compliance Energy Total
® 198.18
196.74
1.44
0.7%
Registration Number: 11%i, Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Date(Tlme: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xmi
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
• Insulation below roof deck
CF1 R -PRF -01
Page 2 of 8
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• High Quality Insulation Installation (QII)
Cooling System Verifications:
• ..None --
HVAC Distribution System Verifications:
• —None
Domestic Hot Water System Verifications:
.-None ^
v
ENERGY DESIGN RATING ,igv
This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as.domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on-site renewable energy system. 4:09
Reference Energy Use � Energy Design Rating Margin Percent Improvement
Total Energy (kTDV/f2-yr)* 248.66 `�� 247.22 1.44 0.6%
includes calculated Appliances and Miscellaneous Energy Use (AMEU) G�
BUILDING - FEATURES INFORMATION s* F
01
02
0103
04
05
06
07
Number of Dwelling
Zone Floor Area
Avg. Ceiling
Number of Ventilation
Number of Water
Project Name
Conditioned Floor Area (ft2)
I* Units
Number of Bedrooms
Number of Zones
Cooling Systems
Heating Systems
Remodeled Residence
1739
J 1
3
2
1
1
U'N
ZONE INFORMATION _ 11110
01
02
03
04
05
06
07
Zone Floor Area
Avg. Ceiling
Zone Name
Zone Type -0
HVAC System Name
(ft2)
Height
Water Heating System 1
Water Heating System 2
residence
Conditiongd
HVAC1
1660
9
DHW Sys 1
addition
Con�dhioned
HVAC1
79
9
DHW Sys 1
.0
Registration Number: Registration Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFiR-04072016-744
HERS Provider:
Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation DatelTime: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis Input File Name: Vonderhaar- Pitchford- 16.xml
CF1 R -PRF -01
Page 3 of 8
OPAQUE SURFACES
01
02
03
04
05
fir—
06
07
01
02
03
04 05
06
07
08
09
10
Name
Zone
Construction
Azimuth Orientation
Gross Area (ft2)
Window & Door
Area (ft2)
Tilt
(deg)
Status
Verified
Existing
Condition
5d Wall ex
residence
R-13 Wall + 21
5 Right
826
77.4
90
Existing
No
95d Wall ex
residence
R-13 Wall + 21
95 Front
628
116
90
Existing
No
140d Wall ex
residence
R-13 Wall + 21
140 45
192
20
90
Existing
No
185d Wall ex
residence
R-13 Wall + 21
185 Left
826
0
90
Existing
No
275d Wall ex
residence
R-13 Wall + 21
275 ABack
628
0
90
Existing
No
Roof 2
residence
Defaul: 1978 to present
�v
1660
Existing
No
185d Wall
addition
R-13 Wall + 21
185 Left
96
0
90
Existing
No
Roof 3
addition
R-38 Roof Attic
,%
69.6
New
N/A
OPAQUE SURFACES — Cathedral Ceilings P
01
02
03
04
05
fir—
06
07
08
09
10
11
12
13
Radiant
Statu
Q11
>
Name
Construction
AType
Roof
Roof Reflectance
Framin
Barrier
Verified
s
Condition
Orientatlo
Area
Skylight
Roof Rise
Roof
Roof
Reflecten
Roof
g
Attic residence
Existing
Name
Zone
Type
n
(ft2)11
Area (ft2)
(x In 12)
Pitch
Tilt(deg)
ce
Emlttance
Factor
Status
Condiflon
Roof
addition
R-38 Roof Attic1
- specify -�9
3
9.4
3
0.25
14.04
0.1
0.85
0.1
New
N/A
ATTIC
01
02
awQ3'
04
05
06
07
08
09
10
Radiant
Statu
Verified Existing
Name
Construction
AType
Roof Rise
Roof Reflectance
Roof Emittance
Barrier
Cool Roof
s
Condition
Ex9 ti
Attic residence
Attic Roofresidence)
Ventilated
3
0.1
0.85
No
No
No
Attic addition
Attic Roofaddition kW
Ventilated
3
0.1
0.85
Yes
No
New
No
A
Registration Number:
CA Building Energy Efficiency Stana ds - 2013 Residential Compliance
Registration Date/Time:
Report Version - CF1R-04072016-744
HERS Provider:
Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Daterrime: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xml
CF1 R -PRF -01
Page 4of8
WINDOWS
01
02
03 04 05
06
07
08
09
10
11
Name
Surface (Orientation -Azimuth)
Muitiplie
Width(ft) Height (ft) r
Area (ft2)
U -factor
SHGC
Exterior Shading
Status
Verif led
Existing
Condition
ex 2.5x6
5d Wall ex (Right -5)
---- ---- 1
15.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 2.5x6 2
5d Wall ex (Right -5)
---- 1
15.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x6
5d Wall ex (Right -5)
---- ---- 1
18.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x6 2
5d Wall ex (Right -5)
---- ---- 1
18.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 3x3.8
5d Wall ex (Right -5)
---- ---- 1
011.4
0.71
0.60
Insect Screen (default)
Existing
No
ex 4x5
95d Wall ex (Front -95)
---- ---- 1 20.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 6x8
95d Wall ex (Front -95)
4,1{g1
48.0
0.71
0.60
Insect Screen (default)
Existing
No
ex 4x5 2
140d Wall ex (- specify --140)
---- ---- "101,
20.0
0.71
0.60
Insect Screen (default)
Existing
No
Skylight
Roof (- specify --270)
v 1
9.4
0.43
0.23
None
New
N/A
DOORS t$,. IV
01 02 AV, 03 04 05 06
Name Side of Building Area (ft2) U -f actor Status Verlfled Existing Condition
Ago I
Door 95d Wall ex -0' 48.0 0.50 Existing No
/q� C*
• '{!A
Registration Number:, Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744
HERS Provider:
Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Date rime: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis
Input File Name: Vonderhaar-Pitchford-16.xml
CF1 R -PRF -01
Page 5 of 8
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
09
Total Cavity
Winter Design
Construction Name
Surface Type
Construction Type
Framing
R -value
U -value
Assembly Layers
Existing
Name
Zone�� Area (ft2)
(ft)
• Cavity / Frame: no insul. /2x4 Top Chrd
Fraction
Heated
Status
2x4 Top Chord of Roof Truss @ 24
Covered Slab
residence 1660
Roof Decor: Wood Siding/sheathing/decking
Attic Roofresidence
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
14
None
0.8
No
New
No
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
Defaul: 1978 to present
attic)
Wood Framed Ceiling
2x4 Q 16 in. O.C.
R 11
0.083
Over Floor Joists: R-1.9 insul.
• Inside Finish: Gypsum Board
Sheathing/ Insulation: R21 Sheathing
Cavity/Frame: R -13/2x4
Exterior Finish: Wood
R-13 Wall + 21
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C..
R 13
0.030
Siding/sheathing/decking
-�
Under Roof Joists: R-6.0 insul.
Cavity/Frame: R -13.0/2x4 Top Chrd
2x4 Top Chord of Roof Truss Q 24
Roof Deck: Wood Siding/sheathing/decking
Attic Roofaddition
Attic Roofs
Wood Framed Ceiling
in. C•°C.
R 19
0.052
Roofing: Light Roof (Asphalt Shingle)
Inside Finish: Gypsum Board
Ceilings (below
QO
Cavity/Frame: R-9.1 /2x4
R-38 Roof Attic
attic)
Wood Framed Ceiling
2x4 Q 16 in. O.C.
R 19
0.049
Over Floor Joists: R-9.9 insul.
Inside Finish: Gypsum Board
• Sheathing /Insulation: R19 Sheathing
Cavity/ Frame: R -19/2x4
�i
Roof Deck: Wood Siding/sheathing/decking
R-38 Roof Atticl
Cathedral Ceilings
Wood Framed Ceiling
_ 2x4 @ 16 in. O.C.
R 19
0.027
Roofing: Light Roof (Asphalt Shingle)
%Zki
SLAB FLOORS
01
02 03
04
05
06
07
08
09
Verified
Perimeter
Carpeted
Existing
Name
Zone�� Area (ft2)
(ft)
Edge Insul. R -value
Fraction
Heated
Status
Condition
Covered Slab
residence 1660
175
None
0.8
No
Existing
No
Covered Slab 2
addition 79
14
None
0.8
No
New
No
v�
BUILDING ENVELOPE- HERS VERIFICATION®�
01�` 02 03 04
Quality Insulation Installation (QII)i,4 Quality Installation of Spray Foam Insulation Building Envelope Air Leakage CFM50
Required U17 Not Required Not Required ---
Registration Number:, Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Date/Time: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis
Input File Name: Vonderhaar-Pitchford-16.xmi
CF1 R -PRF -01
Page 6 of 8
WATER HEATING SYSTEMS
01
02
03
04
05
06
07
08
Name
System Type
Distribution Type
Water Heater
Number of
Heaters
Solar
Fraction
N
Status
Verified Existing
Condition
DHW Sys 1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
Annual
Existing
No
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume?i
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50 i$W
0.61 EF
40000-Btu/hr
0
0
WATER HEATING - HERS VERIFICATION 4
01
02
03 4W 04
05
06
07
Name
Pipe Insulation
Parallel Plpifigp Compact Distribution
Point -of Use
Recirculation with
Manual Control
Recirculation with
Sensor Control
DHW Sys 1
n/a
n/a V n/a
n/a
n/a
n/a
*Aw
SPACE CONDITIONING SYSTEMS
01
02
03
G 04
05
06
07
08
09
Heating System
Lv Cooling System
*
Distribution
Fan
Floor Area
Verif led Existing
Name
System Type
Name Ducted
Name Ducted
System
System
Served
Status
Condition
HVAC1
Other Heating and
Heating]
`
e
Cooling
Yes
Air Distribution
HVAC Fan
1739
Existing
No
Cooling System
Component 11
^1
Component 1
System 1
1
HVAC - HEATING SYSTEMS �+
01 ^i�j 02 03
Name Type Efficiency
Heating Component 1AW CntrlFurnace - Fuel -fired central furnace 80 AFUE
Registration Number:�S Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-1918:41:34
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence Calculation Date(Time: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis Input File Name: Vonderhaar- Pitchford- 16.xml
CF1 R -PRF -01
Page 7of8
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
08
09
Efficiency
Multi -speed
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10
12
No
No
N/A
Condition
system
.(L
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05 06
07
08
09
10
Insulation
Supply Duct Return Duct
Verified Existing
HERS
Name
Type
Duct Leakage
R -value
Location cation
Bypass Duct
Status
Condition
Verification
.(L
Air Distribution
Ducts located in attic
Existing (not
6.0
Attic Attic
None
Existing
No
N/A
System 1
specified)
(�esr
IAO (Indoor Air Quality) FANS sws
01 02 b' 03 04 05
Name IAO CFM IAQ Fan Type IAQ Recovery Effectiveness(%) HERS Verification
SFam IAQVentRpt 0 Default 0 Not Required
1.
COOLING VENTILATION
IV
01
02,r 03 04
Name
Cooling*Vent CFM Cooling Vent Watts/CFM Number of Fans
WH Fan 1
!�,,O61 0.52459 1
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744 Report Generated at: 2016-09-1918:41:34
4
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Remodeled Residence i Calculation Date/Time: 18:41, Mon, Sep 19, 2016
Calculation Description: Title 24 Analysis Input File Name: Vonderhaar-Pitchford-16.xml
CF1 R -PRF -01
Page 8 of 8
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Tim Scott
Company:
Signature Date:
Scott Design and Title 24, Inc,
9/19/2016
Address:
CEA/HERS Certification Identification (If applicable):
74-818 Velie Way, Suite 8
City/State ip:
Palm Desert, CA 92260
Phone:
O 200-4780
RESPONSIBLE PERSON'S DECLARATION STATEMENT�V
I certify the following under penalty of perjury, under the laws of the State of California: ,��v
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility forA building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificategf' ompliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consiste i�theinfo�r�videdn other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency: for approval with t
Responsible Designer Name: ai
R o I e
Robert A. Pitchford .(/�
Company:v
at igned: O�
��
Robert A. Pitchford Design and Drafting
/
Address: ��
License:
77-622 Country Club STE O 0�
City/State/Zip: `�
Phone:
Palm Desert, CA 92211 ��
(760) 346-2856
Q
Registration Number:'�, Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04072016-744
HERS Provider:
Report Generated at: 2016-09-19 18:41:34
RESIDENTIAL MEASURES SUMMARY
RMS-1
Project Name
Vonderhaar Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family 10 Existing+ Addition/Alteration
Date
9/19/2016
Project Address
50-005 Calle Rosa Rita La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
1,739
Addition
79
# of Units
1
INSULATION
Construction Type
Area
Cavity vo Special Features Status
Roof Wood Framed Attic R11 1,660 Existing
Wall Wood Framed R 13 2,983 Rigid=R-21.0 Existing
Door Opaque Door no insulation 48 Existing
Slab Unheated Slab-on-Grade - no insulation 1,660 Perim = 175' Existing
Demising Wood Framed R 13 985 Rigid=R-21.0 New
Roof Wood Framed Attic R 19 70 Rigid=R-19.0 New
Slab Unheated Slab-on-Grade - no insulation 79 Perim = 14' New
FENESTRATION I Total Area: 175 Glazing Percentage: 10.1 % New/Altered Average U-Factor. 0.43
Orientation Area U-Fac SHGC Overhang Sidefins Exterior Shades Status
Right (N) 77.4 0.710
0.60 none none Bug Screen Existing
Front (E) 68.0 0.710
0.60 none none Bug Screen Existing
Front (SE) 20.0 0.710
0.60 none none Bug Screen Existing
Skylight 9.4 0.430
0.23 none none None New
HVAC SYSTEMS
Heating Min. Eff
Cooling Min. Eff Thermostat Status
2 Central Furnace 80% AFUE
Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R-Value Status
HVAC Ducted
Ducted Attic 6.0
Existing
WATER HEATING
Type Gallons Min. Eff Distribution Status
EnemyPro 6.7 by EnelySoft User Number. 6712
Runcode: 2016-09-19T18:43:10 /D:
Pae 11 of 21
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
compliance approach used. Exceptions may apply. Review the respective code section for more information.
Building Envelope Measures:
§ 110.6(a)1:
Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§110.6(a)5:
Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of § 10-111 (a).
§110.7:
Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§ 110.8(a):
Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i):
The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CF1R.
§ 110.80):
A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFI R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a
§ I50.0(a):
rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§150.0(6):
Loose fill insulation shall conform with manufacturer's installed design labeled R -value.
§150.0(c):
Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U -
factor).
§ 150.0(d):
Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U -factor.
In Climate Zones 14 and 16 a Class Il vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
§ I50.0(g)1:
walls, vented attics and unvented attics with air -permeable insulation.
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class 11
§150.0(8)2:
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class 1I vapor retarder shall be placed over the earth floor of
§150.0(g)3:
the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§ 150.0(1):
Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8
§ 150.0(q):
Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
factor of 0.58; or the weighted average U -factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§150.0(e)IA:
Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)1B:
Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§150.0(e)1C:
Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§ I50.0(e)2:
Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measums:
§ 110.0-§ 110.3:
HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§ 110.3(c)5:
Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of §I 10.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli-
§ 110.5:
ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§150.0(h)1:
Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in §150.0(h)2.
§ 150.0(h)3A:
Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§150.0(i):
Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c).
§ 150.00) I A:
Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§150.00)1B:
Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
§ I50.06)2A:
regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§150.00)2B:
All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
2013 Low -Rise Residential Mandatory Measures Summary
§ I50.00)2C:
Pipe for cooling system lines shall be insulated as specified in §150.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
§ 150.00)3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§ 150.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§ 150.00)3B:
or Class H vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class 11 vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)l:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§ I50.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5.
§ 150.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing enc roved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§150.0(m)]:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than %< inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross-sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§ I50.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§150.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§150.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§ I50.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§150.0(m)10:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§150.0(m)1 l:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§150.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
§150.0(m)12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§150.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy:S 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§150.0(m)15:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of?: 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of:5 0.58 W/CFM as confirmed by field verification and diagnostic
testing,in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§ 150.0(0):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§ 150.0(0)1 A:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on-off switch mounted outside of the heater that allows shutting off the healer without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
2013 Low -Rise Residential Mandatory Measures Summary
§ 110.4(b)1:
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§ 110.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§ 110.4(b)3:
Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro-
grammed to run only during off-peak electric demand periods.
§ 110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§ 110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of §110.9.
§150.0(k)IA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with § 150.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§150.0(k)1B:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§150.0(k)IC:
§ I30.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§150.0(k)ID:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§ 150.0(k)1 E:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § I30.0(c). Night lights do not need to
be controlled by vacancy sensors.
§150.0(k)1F:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of § 150.0(k).
§150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§ I50.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§ I50.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§ 150.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§ 150.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with §150.0(k).
§150.0(k)2F:
Lighting controls comply with applicable requirements of §110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer
§ 150.0(k)2G:
according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5; and all other
requirements in §150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of §I50.0(k) if: it
§ 150.0(k)2H:
functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of §130.4; the EMCS requirements
of § 130.5; and all other requirements in ' 150.0(k)2.
§ 150.0(k)21:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in § 150.0(k)2.
§ 150.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§ 150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§150.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§ 150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§ 150.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testingtrating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§ I50.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with §150.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ 150.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summary
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with §110.9; meets the Installation Certification requirements in §130.4; meets the
requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically tum the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§ I50.0(k)9B:
following requirements:
i. Shall comply with § 150.0(k)9A; or
ii. Shall comply with the applicable requirements in §110.9, § 130.0, § 130.2, § 130.4, §140.7 and §141.0.
§ 150.0(k)9C:
For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in 110.9, 130.0, 130.2, 130.4, 140.7 and 141.0.
§ 150.0(k)9D:
Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in 110.9, §130.0, § 130.2, § 130.4, § 140.7 and 141.0.
§150.0(k)10:
Intemally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined
according to §130.0(c).
§ I50.0(k)11:
Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
'110.9, '130.0,
nonresidential garages in 130.1, '130.4, 140.6, and 141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§ 150.0(k)12A:
the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§150.0(k)12B:
i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§1 10.10(a)l:
tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of § 110.10 b through 110.10 e .
§I 10.10(a)2:
Low-rise multi -family buildings shall comply with the requirements of §I10.10(b) through §I 10.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§ 110.10(b)l:
buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2:
All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§ 110.10(b)3A:
No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B:
the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone, measured in the vertical plane.
§ 110.10(6)4:
For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c):
from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§ 110.10(d):
A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through § 110.10(c)
shall be provided to the occupant.
§ 110.10(e)1:
The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§ 110.10(e)2:
future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
Date
Vonderhaar Residence
9/19/2016
System Name
Floor Area
HVAC
1,739
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems
2
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
CFM Sensible
3,625 31,528
0
2,152
0
261 11,459
0
2,152
1 47,290
COIL HTG.
Latent CFM
2,484 581
2,033 261
4,517
PEAK
Heating System
Sensible
Output per System 89,000
33,524
Total Output Btuh 178,000
Output Btuh/ 102.4
1,934
Cooling System
0
Output per system 35,500
12,590
Total Output Btuh 71,000
0
Total Output Tons 5.9
1,934
Total Output Btuh/ tt 40.8
Total Output on 293.9
49,980
Air System
CFM per System
1,400
HVAC EQUIPMENT SELECTION
Airflow cfm
2,800
Existing HVAC
40,114
23,519
178,000
Airflow (cfm/ft
1.61
Airflow cfmfTon
473.2
Outside Air °yo
9-3%
Total Adjusted System Output
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK
40,114
23,519 178,000
Aug 3 PM Jan 1 AM
Outside Air (cfm/ft 0.15
Note: values above given at ARI conditions
HEATING SYSTEM PSYCHROMETRICS
Airstream Temperatures at Time of Heating Peak
26 OF 67 of
67 of 127 of
Outside Air
261 cfm Supply Fan Heating Coil
126 of
2,800 cfm
ROOM
71 of Return Fan 71 of
72 of
2,800 cfm ® III 111
COOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak
112/78OF 75/65OF
75/66OF 61 /60°F
O'
Outside Air
261 cfm
Supply Fan Cooling Coil
62 / 61 of
2,800 cfm
71.5%
ROOM - M
Return Fan
71 / 64 of
71 / 64 of
0 2,800
70 / 64 of
cfm
EnergyPro 6.7 by EnergySoff
User Number. 6712 RunCode: 2016-09-19T18:43:10 ID:
Page 16 of 21
ROOM LOAD SUMMARY
31,5281
2,4841
581 33,524
Project Name
Vonderhaar Residence
31,528
2,484
Date
9/19/2016
System Name
HVAC
Floor Area
1,739
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
Zone Name Room Name
Mult. CFM Sensible Latent
CFM Sensible Latent
CFM Sensible
residence altered residence
1 3,500 30,440 2,371
3,500 30,440 2,371
559 32,279
addition new addition
1 125 1,088 113
125 1,088 113
22 1,245
PAGE TOTAL
TOTAL•
3,6251
31,5281
2,4841
581 33,524
3,625
31,528
2,484
581 33,524
. Total includes ventilation load for zonal systems.
EneMyPfo 6.7 by EnergySoft User Number. 6712 RunCode: 2016-09-19T18:43:10 ID: Pave 17 of 21
ROOM HEATING PEAK LOADS
Project Name
Date
Vonderhaar Residence
9/19/2016
ROOM INFORMATION
DESIGN CONDITIONS
Room Name altered residence
Time of Peak Jan 1 AM
Floor Area 1,660.0 ftz
Outdoor Dry Bulb Temperature 26 OF
Indoor Dry Bulb Temperature 72 OF
Conduction Area
U -Value
AT F
Btu/hr
Default 1978 to present 1,660.0
X 0.0790
X 46
= 6,032
R-13 Wall + 21 2,886.6
X 0.0800
X 46
c 10,619
Existing Window 165.4
X 0.7100
X 46
= 5,402
Wood Door 48.0
X 0.5000
X 46
= 1,104
Slab -On -Grade perim = 175.0
X 0.7300
X 46
0 5,877
'R-13 Wall + 21 511.0
X 0.0800
X 0
_ 0
X
X
-
X
X
=
X
X
=
X
X
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
X
X
=
Items shown with an asterisk (`) denote conduction through an interior surface
to another room
Page Total
29,034
Infiltration:[ 1.00 X 1.064 X 1,660 X
9.00 X 0.266
/60] X
46 = 3,244
Schedule Air Sensible Area
Ceiling Height ACH
AT
Fraction
TOTAL HOURLY HEAT LOSS FOR ROOM 32,279
EnergyPro 6.7 by EnergySoft User Number. 6712 RunCode: 2016-09-19T18:43:10 ID: Page 18 of 21
ROOM HEATING PEAK LOADS
Project Name
Vonderhaar Residence
ROOM INFORMATION
Room Name
Floor Area
Indoor Dry Bulb
Conduction
R-38 Roof Attic
Skylight.... 43/.23
R-13Wag +21
Slab -On -Grade
'R-13 Wall + 21
DESIGN CONDITIONS
new addition Time of Peak
79.0 ft' Outdoor Dry Bulb Temperature
72 OF
Area
69.6
9.4
96.0
perim = 14.0
474.0
U -Value
X
X
X
0.0254
X
X
X
0.4300
0.0800
X
0.7300
X
X
X
X
X
0.0800
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Items shown with an asterisk (') denote conduction through an interior surface to another room
Infiltration:[ 1.0o X 1.os4 X 7s X s.00 X o.26s
Schedule Air Sensible Area Ceiling Height ACH
Fraction
TOTAL HOURLY HEAT LOSS FOR ROOM
User
AT °F
46
46
46
46
0
Page Tc
i60] XC
AT
9/19/2016
Jan 1 AM
26 OF
Btuthr
81
186
0 353
470
0
tal 1.090
46 = 154
1.2451
RESIDENTIAL ROOM COOLING LOAD SUMMARY
Project Name
Date
Vonderhaar Residence
9/19/2016
ROOM INFORMATION
DESIGN CONDITIONS
Room Name
altered residence
Outdoor Dry Bulb Temperature
112 OF
Floor Area
1,660.0 ft2
Outdoor Wet Bulb Temperature
78 OF
Indoor Dry Bulb Temperature 70 OF
Outdoor Daily Range:
34 OF
Opaque Surfaces
Orientation Area U -Factor CLTD'
Btu/hr
Default 1978 to present
(W) 1,660.0 X 0.0790 X
56.0 =
7,344
R-13 Wall + 21
(N) 748.6 X 0.0800 X
23.7 =
1,417
R-13 Wall + 21
(E) 512.0 X 0.0800 X
32.8 =
1,342
Wood Door
(E) 48.0 X 0.5000 X
32.8 =
787
R-13 Wall + 21
(SE) 172.0 X 0.0800 X
30.4 =
419
R-13 Wall + 21
(S) 826.0 X 0.0800 X
26.6 =
11754
R-13 Wall + 21
(W) 628.0 X 0.0800 X
32.7
1,642
'R-13 Wall + 21
511.0 X 0.0800 X
0.0 =
0
X X
=
Page Total
14,705
Items shown with an asterisk (')
denote conduction through an interior surface to another room.
1. Cooling Load Temperature
Difference (CLTD)
Shaded Unshaded
Fenestration
Orientation Area GLF Area
GLF
Btu/hr
ex 2.5x6
(N) 0.0 X 36.5 + 15.0 X
38.6 =
579
ex 2.5x6
(N) 0.0 X 36.5 + 15.0 X
38.6 -
579
ex 3x6
(N) 0.0 X 36.5 + 18.0 X
38.6 =
695
ex 3x6
(N) 0.0 X 36.5 + 18.0 X
38.6 =
695
ex 3x3.8
(N) 0.0 X 36.5 + 11.4 X
38.6 -
440
ex 4x5
(E) 0.0 X 36.51+ 20.0 X
71.4 -
1,429
ex 6x8
(E) 0.0 X 36.5 + 48.0 X
71.4 =
3,429
ex 4x5
(SE) 0.0 X 36.5 + 20.0 X
48.8 -
975
X + 1XI-
Page Total
8.621
Internal Gain
Btu/hr
Occupants
5.0 Occupants X 245 Btuh/occ.
=
1,220
Equipment
1,660 Floor Area X 0.50 w/sgft
=
2,833
Infiltration: 1.064
X 0.94 X 68.47 X 42 =
2,862
Air Sensible
CFM ELA AT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM
30,440
Latent Gain
Btu/hr
Occupants
5.0 Occupants X 155 Btuh/occ.
=
772
Infiltration: 4.771
X 0.94 X 68.47 X 0.00523 =
1,599
Air Sensible
CFM ELA AW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM
772
EnerovPro 6.7 bv EnemvSoft
User Number. 6712 RunCode: 2016-09-19T18:43:10 ID:
Page 20 of 21
r�
RESIDENTIAL ROOM COOLING LOAD SUMMARY
Project Name
Date
Vonderhaar Residence
1 9/19/2016
ROOM INFORMATION
DESIGN CONDITIONS
Room Name
new addition
Outdoor Dry Bulb Temperature
112 OF
Floor Area
79.0 ft2
Outdoor Wet Bulb Temperature
78 OF
Indoor Dry Bulb Temperature 70 OF
Outdoor Daily Range:
34 OF
Opaque Surfaces
Orientation Area U -Factor
CLTD'
Btu/hr
R-38 Roof Attic
(W) 69.6 x 0.0254
x 56.0 =
99
R-13 Wall + 21
(S) 96.0 x 0.0800
x 26.6 =
204
R-13 Wall + 21
474.0 x 0.0800
x 0.0 =
0
x
x =
x
x =
x
x =
X
x =
x
x =
x
x =
Page Total
303
Items shown with an asterisk (')
denote conduction through an interior surface to another room.
1. Cooling Load Temperature
Difference (CLTD)
Shaded
Unshaded
Fenestration
Orientation Area GLF Area GLF
Btu/hr
Skylight
(W) 0.0 x 17.4 +
9.4 x 48.5 0
456
x +
x -
x +
x -
x +
x -
x +
X -
x +
x -
x +
x -
x +
x _
x +
x =
Page Total
45
Internal Gain
Btu/hr
Occupants
0.2 Occupants x 245
Btuh/occ. =
58
Equipment
79 Floor Area x 0.50
w/sgft =
135
Infiltration: 1.064
x 0.94 x 3.26 x 42 =
136
Air Sensible
CFM ELA AT
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM
1,088
Latent Gain
Btu/hr
Occupants
0.2 Occupants x 155
Btuh/occ. =
37
Infiltration: 4.771
x 0.94 x 3.26 x 0.00523 =
76
Air Sensible
CFM ELA AW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM
37
EnemyPro 6.7 by EnemySoft
User Number. 6712 Runcode: 2016-09-19T18:43:10 ID:
Page 21 of 21