Loading...
07-1402 (AR)P.O. BOX 1504 .78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 �l Application Number: 07-00001402 �- Property Address: 49425 RIO ARENOSO APN.. 646-320-041- - - Application description: ADDITION - RESIDENTIAL Property Zoning: LOW DENSITY RESIDENTIAL Application valuation: 49993 Applicant: BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Owner: ANDERSON JAMES C P 0 BOX 8701 INCLINE VILLAGE, NV 89452 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: License No.: 7923,8/1 Date r Contractor:��/L6 OWNER -BUILDER DECLARATION hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for apermit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' .State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractors) licensed pursuant to the Contractors' State License Law.). I—) I am exempt under Sec.. , B.&P.C. for this reason Date Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPE%-,11T VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 CN_ V 6��fr Date: 11/28/07 007 l WORKER'S COMPENSATION DECLARATIONt --i ------- I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 229-0025305 I certify that, in the performance.of the work for which this permit is issued, I shall not employ any . person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to�the workers' compensation provisions of Section ' 9• /3/7700 of the Labor Code, I shall forthwith comply with those provisions. Date, < /%/ Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND. DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building constructs hereby prize r ent ives of this lcounty/t�o eter upon the above-mentioned property for insp3p4r Date: fO / !� Signature (Applicant or Agent): Contractor: Architect or Engineer: RISEN CONSTRUCTION M!� 82775 CHARLESTOWN i INDIO, CA 92201 - (760)347-6399 Lic. No.: 792381 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: License No.: 7923,8/1 Date r Contractor:��/L6 OWNER -BUILDER DECLARATION hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for apermit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' .State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractors) licensed pursuant to the Contractors' State License Law.). I—) I am exempt under Sec.. , B.&P.C. for this reason Date Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPE%-,11T VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 CN_ V 6��fr Date: 11/28/07 007 l WORKER'S COMPENSATION DECLARATIONt --i ------- I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 229-0025305 I certify that, in the performance.of the work for which this permit is issued, I shall not employ any . person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to�the workers' compensation provisions of Section ' 9• /3/7700 of the Labor Code, I shall forthwith comply with those provisions. Date, < /%/ Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND. DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building constructs hereby prize r ent ives of this lcounty/t�o eter upon the above-mentioned property for insp3p4r Date: fO / !� Signature (Applicant or Agent): LQPERIMIT Application Number . . . . . 07-00001402 L. LQPERIMIT Application Number . . . . . 07-00001402 Permit BUILDING PERMIT Additional desc.. Permit Fee . . . 414.50 Plan Check Fee'. 269.43 Issue Date. Valuation . . . . 49993 Expiration Date -5/26/08 Qty Unit Charge Per Extension BASE FEE 252.00 25.00 6.5000 ----------------------------------------------------------------------------- THOU BLDG 25,001-50,000 .162.50 Permit . . ELECT - ADD/ALT/REM Additional desc . Permit Fee 45.59 Plan Check Fee 11.40 Issue Date Valuation . . 0 Expiration Date 5/26/08 Qty Unit Charge Per Extension BASE FEE 15.00 874.00 .0350 ------------------------------------------------------------------------------ ELEC NEW RES - 1 OR -2 FAMILY. 30.59 Permit GRADING'PERMIT Additional desc . Permit Fee 15.00 Plan Check Fee .00 Issue -Date Valuation 0 Expiration Date 5/26/08 Qty Unit Charge Per Extension ------------------------------------------------=--------------------------- BASE FEE 15.00 Permit MECHANICAL Additional. desc . Permit Fee . . . . 46.00 Plan Check Fee 11.50 Issue Date Valuation 0 Expiration Date 5/26/08 Qty Unit Charge Per Extension BASE FEE 15.00 1.00 9.0000 EA MECH FURNACE <=100K 9.00 1.00 9.0000 EA MECH B/C <=3HP/100K BTU 9.00 2.00 6.5000 ---------------------------------------------------------------------------- EA MECH .VENT FAN 13.00 Permit . . . PLUMBING Additional desc . i Application Number . . . 07-00001402 Permit PLUMBING Permit Fee 88.50 Plan Check Fee 22.13 Issue Date . . . Valuation . . . . 0 Expiration Date 5/26/08 Qty Unit Charge Per Extension BASE FEE 15.00 7:00 6.0000 EA PLB FIXTURE 42.00 1.00 15.0000 EA PLB,BUILDING SEWER 15.00 1.00 7.5000 EA PLB WATER HEATER/VENT 7.50 1:00 3.0000 EA PLB WATER INST/ALT/REP 3.00 2.00 3.0000 EA PLB GAS PIPE.1-4 OUTLETS 6.00 --------------------------------------- Special Notes and Comments ----------------------- 874 SQ. FT. CASITA ADDITION --.------------------'-------------------------------------------------------- -Other Fees ENERGY REVIEW FEE 26.94 STRONG MOTION (SMI) - RES 4.99 Fee summary Charged. Paid Credited Due Permit Fee Total 609.59 .00 .00 609.59 Plan Check Total_ 314.46 :00 .00 314.46 Other Fee Total 31.93 00 .00 31.93 Grand Total. 955.98 .00 .00 955.98 i L&MMIT. ' '77 MkI [Bin # City of La Quinta Building u Safety Division P.O. Box - 1504, 78-495 Calle Tampico Perm�t # Project Address:* 42-47-,�- Rio dR-,-NC);S(3 Owner's Name: v—or so Legal Description: Pity, ST, Ziii: C— Telephone: Ned) AQ9 -49'4 State Lic. #: 57 Name of Contact Person: Construction Type: Project type (circleone): New Ad d'n' Alter Repair Demo Telephone # of Contact Person: (560) Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS LINE Plan Sets Plan Check submitted 5/0 Item Amount Structural Calcs. Reviewed, ready for corrections 30 Plan Check Deposit Trus*s CaIcs. Called Contact Person Plan' Check Balance Energy CaIcs; Plans Picked up [Construction Flood plain.plan Plans resubmitted Lai I Mechanical Subco ntactor List Called Contact Person Plumbing Grant Deed Plans picked up S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- 3' Review, ready for corrections/issue Dev'elopcfl� pact Fee Planning Approval Called Contact Person Pub. Wks. Appr Date of permit issue L I V School Fees ----------------- --FTo—t.I Permit Fees Date 12/7/07 No. 29807 Owner Anderson Address 49-425 Rio Arenoso City La Quinta Zip 92253 CERTIFICATE OF COMPLIANCE Desert Sands Unified School District 47950 Dune Palms Road La Quinta, CA 92253 (760) 771-8515 _ 4�." y21 L)k_ Q B RMUDA DUNES rn RANCHO MIRAGE INDIAN WELLS PALM DESERT ,y V LA QUINTA PINDIO yr] O APN # 646-320-041 Jurisdiction La Quinta Permit # Tract # Study Area Type Residential Addition No. of Units 1 Lot # No. Street Unit 1 49425 Rio Arenoso Unit 2 Unit 3 Unit 4 Unit 5 Comments S.F. 874 Unit 6 Unit 7 Unit 8 Unit 9 Unit 10 Lot # No. Street S.F. At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under 5 00 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile ho mes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason: EXEMPTION NOT APPLICABLE This certifies that school facility fees imposed pursuant to Education Code Section 17620 and Government Code 65995 Et Seq. in the amount of $2.63 X 874 S.F. or $2,298.62 have been paid for the property listed above and that building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued. Fees Paid By CC/Rabobank - Lucy Ruelas Check No. 007001540 Name on the check Telephone 347.6399 . , Funding Residential By Dr. Sharon P. McGehee Superintendent �y+'�` A�n�ne"_,," ti4� •= i �� IAS Fee collected /exem ed by a On Gilvrey Payment Recd w.._ 0.00 r $2,298.62 ��er/U r_.� ey�r- = - A Signature C t•� • ��i8 •, yiy� � •�l;' ' r,. •.;� ,� , rrrt;: NOTICE: Pursuant to Government Code Section 66020(d)( , this ill serve to notify you that the 90 -day approval period in which you may protest the fees o r other payment identified above will begin to run from the d which the building or installation permit for this project is issued, or from the date on which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier. NOTICE: This Document NOT VALID if Duplicated Embossed Original- Building Department/Applicant Copy - Applicant/Receipt Copy - Accounting ;`;e Vemtawwas at Rancho La Quinta Arckitectural Control Committee October 24, 2007 Mr. and Mrs. James Anderson 49-425 Rio Arenoso La Quinta, CA 92253 Re: 49-425 Rio Arenoso Approval of Submission And Notice of Recorded Variance The Architectural Committee reviewed your resubmission for construction of a free standing Casita. The submission as presented is "Approved with the following: All work is to be done in accordance with all applicable requirements of governmental entities, including the City of La Quinta and in accordance with all Homeowners Association architectural guidelines and governing documents. All work is to be done according to the re -submitted APPROVED plan. A City of La Quinta building permit be obtained and copy furnished to the Association prior to commencement of work. A variance is granted for this project only because, (1) no visual impact from the street, (2) you have received neighbor awareness with approval as to the structure that is being built, (3), the building does not exceed the City of La Quinta's ordinance of 50% lot coverage as the square footage of your lot is 13,000+ sq. ft., (4) the unique size and location of the lot and casita, and (5) the lack of physical impact to the adjacent properties. When the work has been finished, please return "Notice of Completion" to the Association Office. The Association's architectural consultant will perform a final inspection after receipt of such notice. All expenses incurred with the recordation of the variance shall be borne by you. Reference to "Variances" as it pertains to the Architectural Committee and/or Board of Directors may be found in the CC&R's, Section 8.8 Variances, page 26-27. After verification of the approved plan modifications have been concluded, your Construction Security Deposit will be processed for refund. Do not hesitate to call me at the on-site office, Si ere , kthe thedire ionof Board of Directors of The-Ventanas HOA Mary E. Walker, CCAM Association General Manager 760.777.8807 fax 760.777.8961 Email: mwalker(cbdrminternet.com cc: Ventanas Architectural Comm. Ventanas Board of Directors Dave Peters, Esq. 777.8807, if you have any questions. TITLE 24 REPORT Title 24 Report for: Anderson 874 s.f. Casita 49-425 Rio Arenoso La Quinta CA, P roject Designer: Paul Nelson 508.3400 I�CITYBUII OF LLA QUINTA Report Prepared By!", & SAFETY DEPT. 7 APPROVED P eq V David Elliott Energy Services, OR CON , ST 7JCTION 9013 SVL BOXDAT 1 ; /0 VICTORVILLE, CA 923915D— (760) 243-3883, Job Number: �Z� 7H101-070 Date: 10/18/2007 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: 7HI0-070 User Number: 1887 1, N. Certificate Of Compliance: Residential (Part 1 of 4) CF -1 R Anderson 874 s f Casita 874 ft2 Existing Floor Area: 10/18/2007 Date Project Title 0 ft2 Slab on Grade Area: 49-425_RioAenoso l a Q�linta_CA 9.0 ft Number of Dwelling Units: 1.00 Building Permit # Project Address David Fllintt FnPrav Services (760) 243-3883 Documentation Author Telephone plan Check/Date FnerPro CompliNtice Method 15 Field Check/Date Climate Zone TDV Standard Proposed Compliance (kBtu/sf-yr) Design Design Margin Space Heating 2.05 1.45 0.60 Space Cooling 78.05 79.77 -1.72 Fans 11.14 11.40 -0.26 Domestic Hot Water 19.94 18.10 1.84 Pumps 0.00 0.00 0.00 Totals 111.18 110.72 0.46 Building Type: ® Single Family ❑ Addition ❑ Mufti Family ❑ Existing + Add/Att Building Front Orientation: (E) 90 deg Fuel Type: Natural Gas Fenestration: Area: 286 ft 2 Avg. U: 0.39 Ratio: 32.7% Avg. SHGC: 0.37 BUILDING ZONE INFORMATION Total Conditioned Floor Area: 874 ft2 Existing Floor Area: n/a ft2 Raised Floor Area: 0 ft2 Slab on Grade Area: 874 ft2 Average Ceiling Height: 9.0 ft Number of Dwelling Units: 1.00 Number of Stories: 1 # of Zone Name Floor Area Volume Units Zone Type Whole House HVA1' R74 78 100 Conditioned OPAQUE SURFACES Insulation Act. Type Frame Area U -Fac. Cay. Cont Azm. Tilt Rnnf Wn0d 874 n nn R-3$ R11 A n Wall Wand 357 0 070 R-13 R-4 S An Wall Wood 176 n 070 R-13 R-4 5 j an wall, Wnnd 399 n 070 R_13 R-4.9; 770 Wall Wood 168 0 070 R_13 R-4 S n Gairts Condition Y / N Status Thermostat Vent Type Hgt. Area Setback— —2 ___ala JA IV Reference Location / Comments 01-A18 Whole House MA3 Whole House MA3 Whole House MA3 Whole Hnimp MA3 Whole House Run Initiation Time: 10118/07 14:16:09 Run Code: 1192742169 EnergyPro 4.3 by EnergySofl User Number. 1887 Job Number. 7H10-070 Page:2 of 9 • Certificate Of Compliance :Residential (Part 2 of 4) CF -1 R Anderson 874 s.f. Casita 10/18/2007 Project Title Date FENESTRATION SURFACES # Type Area U -Factor' SHGCZ True Azm. Tilt Cond. Stat. Glazing Type Location/ Comments JL 2 Window Window Front Front (E) (E) 200 O 4Q(1 NFRC Qffi ERG An _90_ New Dhl_ Metal Clear 62.0 0.370 NFRC 0_35 NFRC 90 90 New Masterview Vinyl French Door Low -E Whole House Whole House 3 Window Front (E) 20.0 0.370 NFRC 0_35 NFRC 90 90 New Masterview lfmyl Low -E Whole House 4 Window Left (S) 57.5 0.370 NFRC 0.35 NFRC 180 90 New Masterview Vmvl Low -E Whole House 5 Window Rear Wo 60.0 0.370 NFRC 0_35 NFRC 270 90 New Wsterview Vinyl Low -E Whole House 6 Window Right (NL 66.5 0.370 NFRC035 NFRC 0 90 New Masterview Vinyl Low -E Whole House 0.1 2.0 2.0 6 Bug Screen 0.76 5.0 4.0 2.0 0.1 2.0 2.0 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LEA. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 Bug Screen 0.76 6.8 3.0 10.0 0.1 10.0 10.0 2 Bug Screen 0.76 5.0 5.0 2.0 0.1 2.0 2.0 3 Bug Screen 0.76 6.8 3.0 10.0 0.1 10.0 10.0 4 Bug Screen 0.76 5.0 2.5 2.0 0"1 2.0 2.0 5 Bug Screen 0.76 5.0 4.0 2.0 0.1 2.0 2.0 6 Bug Screen 0.76 5.0 4.0 2.0 0.1 2.0 2.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Slab Perimeter 154 None No Insulation 26 -At New Whole House Run Initiation Tune: 10/18/07 14:16:09 Run Code: 1192742169 EnergyPro 4.3 by EnergySoft User Number. 1887 Job Number: 7H10-070 Page:3 of 9 REMARKS r: oof: R-38 w/ Radiant Barrier / Wall: R-13 w/ 1" EPS / Window:.37 Uf -.35 SHGC rench Door: .59 Uf -.63 SHGC / FAU: 80% AFUE / A.C.: 13 SEER " Vater Htr:.62 EF / Ducts: R-6.0 / HERS Duct Test - TXV valve check - l COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Documentation Author ~ Name: Name: Title/Firm: Paul Nelson / 508.3400 Titte/Firm: 'd Elliott Ener Services Address: Address: 9013 VL BOX VICTO VILL T Lic #: Telephone: (760) *,VOk if Fri (signature)° (date) (signature) (dal Enforcement Agency (;ABEC Name: b California AwodaUbnof&AftEwa CO11S hms Tle/FiAddres : - CERTIFIED- EIIIERGY ANALYST Address: �' r Telephone: DAVID A. ELLIOTT (signature) (date) Certificate Of Compliance: Residential (Part 3 of 4) CF -1 R Anderson 874 s.f. Casita 10/18/2007 Project Title Date HVAC SYSTEMS Heating Minimum Cooling Minimum Condition Thermostat Location Type • Eff Type Eff Status Type Whole House HVAC Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC DISTRIBUTION Duct Duct Condition Ducts Location Heating Cooling—'-- Location R -Value Status Tested? Whole House HVAC Ducted Ducted Attic 6.0 New Yes Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (BhAr) (gal) Status or RE Loss (%) Ext. Standard Gas 50 gal or Less. Small Gas No Pipe Insulation 1 40,000 50 'New 0.62 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (ft) Add 1/2" Control # HP Type In Plenum Outside Buried Insulation REMARKS r: oof: R-38 w/ Radiant Barrier / Wall: R-13 w/ 1" EPS / Window:.37 Uf -.35 SHGC rench Door: .59 Uf -.63 SHGC / FAU: 80% AFUE / A.C.: 13 SEER " Vater Htr:.62 EF / Ducts: R-6.0 / HERS Duct Test - TXV valve check - l COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Documentation Author ~ Name: Name: Title/Firm: Paul Nelson / 508.3400 Titte/Firm: 'd Elliott Ener Services Address: Address: 9013 VL BOX VICTO VILL T Lic #: Telephone: (760) *,VOk if Fri (signature)° (date) (signature) (dal Enforcement Agency (;ABEC Name: b California AwodaUbnof&AftEwa CO11S hms Tle/FiAddres : - CERTIFIED- EIIIERGY ANALYST Address: �' r Telephone: DAVID A. ELLIOTT (signature) (date) Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R Anderson 874 s.f. Casita 10/18/2007 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. Plan I Field I The Roof 'R-38 Roof Attic' includes credit for a Radiant Banter installed per Section 3.3.3 of the Residential Manual. I I I HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- approved HERS provider using CEC approved testing and/or verification methods and must be reported on the CF -411 Plan Field installation certificate. The HVAC System "Whole House HVAC" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "Whole House HVAC' incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. I EnergyPro 4.3 by EnergySoft User Number. 1887 Job Number. 7H10-070 Paoe:5 of 9 1 Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Low rise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance superoede the items marked with an asterisk (*) below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE - permit application documentation. NIA DESIGNER MENT Building Envelope Measures § 150(a): Minimum R-19 in wood ceiling insulation or equivalent LI -factor in metal frame ceiling. ❑ ❑ ❑ § 150(b): Loose fill insulation manufacturer's labeled R -Value: ❑ ❑X ❑ •§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent 1 -1 -factor in metal frame walls (does not ❑ ❑X ❑ ❑ apply to exterior mass walls). ❑ ❑ ❑ *§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent LI -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs 1. Masonry and factory -built fireplaces have: a. closable metal or glass door covering the entire opening of the firebox ❑ ❑X ❑ b. outside air intake with damper and control, flue damper and control ❑ ❑X ❑ 2. No continuous burning gas pilot lights allowed. ❑ ❑X ❑ § 150(0: Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. ❑ ❑X ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ permeance rate no greater than 2.0 perm/inch. § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include 1:1 El 1:1CF-0R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ ❑X ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain ❑ ER El Coefficient (SHGC), and infiltration certification. 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ ❑X ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ❑X ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ ❑X ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑X ❑ § 1500): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation ❑ ❑ ❑ having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R42 indemal ❑ ❑ ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150 -AB or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non4ecirculating systems, and entire ❑ ❑X ❑ length ofs of hot water shall insulated to Table 150B. nrur,el2Coong system piping (suction, chilled water, or brinines) , piping insulated between heating source and ❑ ❑ ❑ indirect hot water tank shall be insulated to Table 150-8 and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, ❑ ❑ ❑ and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirety in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.3 by EnergySoft User Number. 1887 Job Number. 7H10-070 Page:6 of 9 Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (*) below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check NIA if not ENFORCE - applicable. NIA DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All duds and plenums installed, sealed and insulated to meet the requirements of the CIVIC Sections 601, 602, 603, 604, ❑ Q ❑ 605, and Standard 6-5; supptyair and retum-air duds and plenums are insulated to a minumum installed level of ' R4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 1818 or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 114 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ X❑ ❑ sealed sheet metal, dud board or flexible dud shall not be used for conveying conditioned air. Building cavities and support platforms may contain duds. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the duds. 1 3. Joints and seams of dud systems and their components shall not be sealed with cloth back rubfxar adhesive ❑ ® ' ❑ duct tapes unless such tape is used in combination with mastic and draw bands. 4. Exhaust fan systems have back draft or automatic dampers. > ❑ ® ❑ r , 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating r ❑ ©' ❑ dampers. r 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ _ © ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. 7. Flexible ducts cannot have porous inner cores. _ ' 0 El § 114: Pool and Spa Heating Systems and Equipment , 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ ❑ ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. - 2. System is installed with: 4 a. At least 36' of pipe between fitter and heater for future solar heating. ' " • � + El,, El El b. Cover for outdoor pools or outdoor spas. r , ❑ ❑ . ❑ 3. Pool system has directional inlets and a circulation pump time switch.. ;"' - , . ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously El© ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr). • �'- � f r. § 118 (1): Cool Roof material meets specified criteria ❑ ❑ ❑ Lighting Measures r § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ ©' ❑ 150-0, and do not contain a medium screw base socket (E24/E26). • Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ Q ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ' ❑ X❑ 1 ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ Q ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). , § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ 0 ❑ controlled by an occupant sensor that complies with Section j 19(d) that does not turn on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover QC) and are ❑ ❑ ❑ certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ X❑ r same lot shall be high efficacy luminaires (not including lighting around swimming pools/Water features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ -- ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section a 119(d). EnergyPro 4.3 by EnergySoft User Number. 1887 , Job Number. 7H10-070 ' Page:7 of 9 ° Residential Kitchen Lighting Worksheet WS -5R Anderson 874 s.f. Casita 10/18/2007 Project Title Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. High Efficacy Luminaire Type High Efficacy? Watts Quantity Watts Other Watts Yes No x = or Yes No x or Yes No x = or Yes No x = or Yes No x,: or Yes No x or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Total A: 0 B: 0 COMPLIES IF A >_ B YES ® NO ❑ EnergyPro 4.3 by EnergySofl User Number. 1887 Job Number. 7H10-070 Page:8 of 9 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Anderson 874 s.f. Casita 10/18/2007 SYSTEM NAME FLOOR AREA Whole House HVAC 874 NGINEERING CHECKS ISYSTEM LOAD Number of Systems 1 Heating System Output per System 60,000 Total Output (Btuh) 60,000 Output (Btuh/sgft) 68.6 Cooling System Output per System 36,400 Total Output (Btuh) 36,400 Total Output (Tons) 3.0 Total Output (Btuh/sgft) 41.6 Total Output (sgff/Ton) 288.1 Air System CFM per System 830 Airflow (cfm) 830 Airflow (cfm/sgft) 0.95 Airflow (cfm/Ton) 273.6 Outside Air (%) 0.0 Outside Air (cfm/sgft) 0.00 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM ISensiblel Latent I I CFM I Sensible 495 15,948 1,54 249 17,178 0 1,448 1,368 0 0 0 0 0 0 0 0 0 1,448 1,368 18845 1,5411 19914 RHEEM RGPJ-07EAMGR/3 ton 29,618 0 60,000 Total Adjusted System Output 29 618 60,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0°F 68.5 OF 68.5 OF 135.90F O Supply Air Ducts Outside Air 0 cfm Supply Fan Heating Coil 134.4 of 830 cfm ROOMS 68.5 of 70.0 OF Return Air Ducts I COOLING SYSTEM 111.0 / 77.4 of Outside Air 0 cfm 79.6/59.2 of 79.6/59.2OF 79.6/59.1OF 46.3/44.60F Supply Fan Cooling Coil 830 cfm h Return Air Ducts 'I Supply Air Ducts 48.0/45.4OF 30.2% R.H. ROOMS 78.0/58.7 OF EnergyPro 4.3 by EnergySoft user Number. 1887 Job Number. 7H10-070 Page:9 of 9 c J� 2005 Joint Appendices Page IV -21 IV.3 Walls Table IV.9 - U -factors of Wood Framed Walls Notes 1. Higher density fiberglass batt is required in these cases. 2. Continuous insulation may be installed on either the inside or the exterior of the wall, or both. 3. Foamed plastic and cellulose shall fill the entire cavity. Cellulose shall have a binder to prevent sagging. ACM Joint Appendix IV - U -Factor, C -Factor, and Thermal Mass Data Rated R -value of Continuous Insulation 2 Cavity omnia Framing R-0 R-2 R-4 R-6 R-7 R-8 R-10 R-14 Spacing Insulation Size A B C D E F G H 16 in. OC None Any 1 0.356 0.204 0.144 0.111 0.100 0.091 0.077 0.059 R-11 batt 2x4 2 0.110 0.087 0.073 0.063 0.059 0.056 0.050 0.041 _R-13 batt 2x4 3 0.102 0.081 0. 68 0.059 0.056 0.052 0.047 0.039 R-15 batt 2x4 4 0.095 0.076 0.064 0.056 0.053 0.050 0.045 0.038 R-19 batt 1 2x6 5 0.074 0.063 0.055 0.049 0.046 0.044 0.040 0.034 R-21 batt 2x6 6 0.069 0.058 0.051 0.046 0.043 0.041 0.038 0.032 R-19 batt 2x8 7 0.065 0.067 0.050 0.045 0.043 0.041 0.038 0.033 R-22 batt 2x8 8 `, 0.061 0.053 0.047 0.042 0.040 0.039 0.036 0.031 R-25 batt 2x8 9 0.057 0.050 0.044 0.040 0.038 0.037 0.034 0.030 R-30 batt 1 2x8 10 0.056 0.049 0.043 0.039 0.038 0.036 0.033 0.029 R-30 batt 2x10 11 0.047 0.042 0.038 0.035 0.034 0.032 0.030 0.027 R-38 batt 1 200 12 0.046 0.041 0.037 0.034 0.033 0.031 0.029 0.026 R-38 batt 2x12 13 0.039 0.035 0.032 0.030 0.029 0.028 0.026 0.023 Foamed 2x4 14 0.103 0.082 0.069 0.060 0.056 0.053 0.048 0.040 Plastic or 2x6 + 15 0.071 0.060 0.052 0.047 0.044 0.042 0.039 0.033 Cellulose Insulation3 2x8 16 0.056 0.049 0.043 0.039 0.038 0.036 0.033 0.029 2x10 17 0.045 0.040 0.036 0.033 0.032 0.031 0.029 0.025 2x12 18 s 0.038 0.034 0.031 0.029 0.028 0.027 0.025 0.023 24 in. OC None Any '19 0.362 0.207 0.145 0.112 0.101 0.092 0.077 0.059 R-11 batt 2x4 20 0.106 0.085 0.072 0.062 0.058 0.055 0.049 0.041 R-13 batt 2x4 21 0.098 0.079 0.067 0.058 0.055 0.052 0.046 0.039 R-15 batt 2x4 22 0.091 0.073 0.062 0.055 0.051. 0.049 0.044 0.037 R-19 batt 2x6 23 0.071 0.061 0.053 0.047 0.045 0.043 0.039 0.034 R-21 batt 2x6 24 0.066 0.056 0.049 0.044 0.042 0.040 0.037 0.032 R-19 batt 2x8 25 0.063 0.055 0.049 0.044 0.042 0.040 0.037 0.032 R-22 batt 2x8 26 0.058 0.051 0.046 0.041 0.040 0.038 0.035 0.030 R-25 batt 2x8 27 0.055 0.048 0.043 0.039 0.037 0.036 0.033 0.029 R-30 batt 1 2x8 28 0.054 0.047 0.042 0.038 0.037 0.035 0.033 0.028 R-30 batt 200 29 0.045 0.041 0.037 0.034 0.033 0.031 0.029 0.026 R-38 batt 1 2x10 30 0.044 0.039 0.036 0.033 0.032 0.031 0.029 0.025 R-38 batt 2x12 31 0.037 0.034 0.031 0.029 0.028 0.027 0.025 0.023 Foamed 2x4 32 0.099 0.080 0.067 0.059 0.055 0.052 0.047 0.039 Plastic or 2x6 33 0.069 0.059 0.051 0.046 0.044 0.042 0.038 0.033 Cellulose Insulation3 2x8 34 0.054 0.048 0.043 0.039 0.037 0.035 0.033 0.029 2x10 35 0A44 0.039 0.036 0.033 0.031 0.030 0.028 0.025 2x12 36 0.036 0.033 0.031 0.028 0.027 0.027 0.025 0.022 Notes 1. Higher density fiberglass batt is required in these cases. 2. Continuous insulation may be installed on either the inside or the exterior of the wall, or both. 3. Foamed plastic and cellulose shall fill the entire cavity. Cellulose shall have a binder to prevent sagging. ACM Joint Appendix IV - U -Factor, C -Factor, and Thermal Mass Data