12-0054 (AR)"f"it 4 ~9.
P.O. BOX 1504 - -
VOICE (760) 777-7012
78-495 CALLE TAMPICO FAX (760) 777-7011
LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153
BUILDING PERMIT
Date: 5/17/12
Application Number: x,12:00000054 Owner:
Property Address: 80161 PALM CIRCLE DR PENNY ENGLISH LEMAY
APN: 649-090-025-14 -4518 -
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 11138
Contractor: D a
Applicant: ' Architect or Engineer: SANCHEZ CONSTRUCTI ERNIE
68075 VIA DOMINGO ET��
DESERT HOT SPRING , 9.224 1 ?01?
(760)329-7159
Lic. No.: 842333 ClryOFQUIRIT
l NAMCE pEPT A
LICENSED CONTRACTOR'S DECLARATION - WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of -.perjury t licensed under pro 'ons of Chapter 9 (commencing with I hereby affirm under penalty of perjury one of the following declarations: -
Section 7000) of Division 3 of the Bus' ess and rofe ionals C e, d my License is in full force and effect. _ I have and will maintain a certificate of consent to self -insure for workers' compensation,. as provided
License Class: B Li No.: 842333 for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
ate Con
or: p _ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance,of the work for which this permit is issued. My workers' compensation
OWNER -BUILDER. DECLARATIO - insurance carrier and policy number are: -
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for. the - Carrier EXEMPT Policy Number EXEMPT
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to Y-
I certify that, in the performance of the work for which this permit is issued, I shall not employ any
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the person in any manner so as to become subject to the workers' compensation laws of California,
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State and agree that, if I s dfdD come subject the workto n pensation provisions of Section
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and 'Professions Code) or 3700 of the La if ode, I hall f hwi mply w'fh tho provisions.
that he or she is exempt therefrom and the basis for.the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars IS5001.: D—/ icant:
(_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure -is not intended or offered for sale (Sec. 7044, Business and Professions Code: The WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAW ND SHALL -
Contractors' State License Law does not apply to an owner of property who builds or improves thereon, -SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
and who does the work himself or herself through his or her own employees, provided that the DOLLARS 1$100,0001. IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
improvements are not intended or offered for sale. If, however, the building or improvement is sold within SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
one year of completion, the owner -builder will have the burden of proving that he or.she did not build or .
improve for the purpose of sale.). APPLICANT. ACKNOWLEDGEMENT
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
7044, Business and Professions Code: The Contractors' State License Law does not apply to anowner of conditions and restrictions set forth on this application.
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed 1. Each person upon whose behalf this application is made, each person at whose request and for
pursuant to the Contractors' State License Law.). whose benefit work is performed under or pursuant to any permit issued. as a result of this application,
1 _) I am exempt under Sec. B.&P.C. for this reason the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta its officers agents and employees for any act or omission related to the work being
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's, Address:
LQPERMIT
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced -
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that above. formation is corre tI agree to comply with all
city and county ordinances and state laws relating to wilding con ructio and a . authorize se olives
of/thhis this to enter upon the above-mentioned pr pe r i p ses -
f7ftf• �� I� igna` ure (Applicant or Agent):
Application Number
12-00000054
Structure Information
Construction Type . .
. . . .TYPE V, UNPROTECTED
Occupancy Type .
. APT/LIVE-WORK/TIMESHARE
Other.struct info .
CODE EDITION 2.010
FLOOD ZONE NO
PATIO SQ FTG
165.00
1ST FLOOR SQUARE FOOTAGE
165.00
Permit . . ..
BUILDING PERMIT .
Additional desc ..
Permit Pee . . . .
135.00 Plan Check Fee
87.75
Issue Date . . . .'
Valuation.
11138
Expiration Date
11/13/12
Qty Unit Charge
Per
Extension
BASE FEE
45.00
10.00 9.0000
-----------------------------------------------------------------------------
THOU BLDG 2,001-25,00.0
90.00
Permit -ELECT
= ADD/'ALT/REM
Additional desc
Permit Fee
23.03 Plan Check Fee
5.76
Issue Date
Valuation
0 -
Expiration Date
11/13/12
Qty Unit -Charge
Per
Extension
BASE FEE
15.00.'
165.00 - --.035p
-
_ ELEC NEW RES 1 OR 2 FAMILY
- - _- -
- 5.78
--,_,
3.00 .7500
PER ELEC DEVICE/FIXTURE iST 20
2.25
Permit
MECHANICAL
' Additional desc :
Permit Fee
19.50 Plan Check'Fee
4:88
Issue Date
Valuation_ . . . .
0
Expiration Date
11/13/12
Qty Unit Charge
Per.
Extension '
BASE FEE
15.00
1.004.5000
EA MECH VENT INST/`DUCT ALT
4.50
Special Notes and Comments
.165 sf PATIO CONVERSION TO LIVING AREA
AT FRONT & REAR PATIOS
OF EXISTING
CONDOMINIUM. 2010 CODES.
--------------------------------------------------------
------------------------------
Other Fees . . .
Other
-7 -------------------
BLDG STDS ADMIN (SB14'73)
1.00
LQPERMIT - -
' Application Number
. .
12-00000054-
2-00000054--------
- - - - - - - -- -- --
Other Fees
-------
.ENERGY REVIEW FEE
8.78
STRONG MOTION (SMI) - RES
1.11
Fee summary
Charged
Paid Credited
Due
Permit Fee Total
177.53
.00 .00
177.53
Plan Check Total
98.39
.00 .00
98.39"
Other.Fee Total'
10:89
.00 .00
10.89
Grand Total.
286.81
:00 ..00
286.81
LQPERMIT
' CERTIFICATE OF COMPLIANCE
Desert Sands Unified School District
47950 Dune Palms Road ¢ BERMUDA DUNES r '
V), RANCHO MIRAGE CJ
Date •4/5/12 La Quinta, CA 92253 INDIAN WELLS
-- PALM DESERT y
No. 31246 (760) 771-8515 LAQUINTA
•QINDIO y7
0
F I
Owner Carole English Lemay APN # 600-080-025
Address 80161 Palm Circle Dr Jurisdiction La Quinta
City La Quinta Zip' Permit #
Tract # No. of Units 1
Type Residential Addition '
Lot # No. Street S.F. ' Lot # No. Street S.F.
Unit 1 80161 Palm Circle Dr 165 Unit 6
Unit 2 Unit 7
Unit 3 Unit 8 '
Unit 4 Unit 8
Unit 5 Unit 10 +
Comments I
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under
500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile
homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less '
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 165 S.F. or $0.00 have been paid for the property listed above and that.
building permits and/or Certificates of Occupancy for this,square footage in this proposed project may noir be issued.
Fees Paid By ,Exempt 7 --Ernest Sanchez check No.
y Name on the check ' Telephone
Funding Exempt '
BY 'Dr. Sharon P. McGehee
Superintendent
Fee collected /exam Sh ro c ilvrey Payment Recd 56:00 -
-Over/Under`,;
Signature
NOTICE: Pursuant to Government Code Section 66020(d)(.1), his wl serve to notify you that the 90 -day approval period in which you may protest the fees
or other payment identified above will begimfo run Irpr ;the,lJ a on iich the building or installation permit for this project is issued, or from the date on
which those amounts are paid to, the District(s)6r to.aW6ther blic ntity authorized to collect them on the District(s) behalf, whichever is earlier.'
NOTICE: This Document NOT VALID withoutembossed seal
Embossed Original - Building Department Applicant..-, Copy - Applicant/Receipt Copy - Accounting
.77
City. of La Quinta
Building & Safety Division
P.O. Box'1504, 78-495 Calle Tampico
La Quinfa, CA 92253 - (760) 777-7012
ACM aa&I eBuilding Permit Application and .Tracking Sheet
Pe #
!o/
Project Address:
Owner's Name: /�4� nr` E= n� / r' /� G 1C hal «►
A. P. Number:
Address: . ,
Legal Description:
,.City,; ST, Zip:
Contractor:Telephone:
�{s�''<
Address: o 7 S 24 .¢ Zo n1.1
Project Description:
City, ST, Zip: a)euC ct/ ;� 14o--l- P
Tele hone.
P Z
/zoo /Ll, WA (,
O »'L- u/,"L
State Lic. # : 8 VOZ X3�� City Lie. #:
Arch., Engr., Designer:
Address:
0 Poler
City, ST, Zip: =. a?j a
Telephone: 41C %- S
State Lic. #:
Name of Contact Person: 46-01—
Construction Type: Occupancy:
Project type (circle one): New Add'n Alter Repair Demo
Sq. FL:
—#Stories:
# Units:
Telephone # of Contact Person:
Estimated Value of Project: a o 6
APPLICANT: DO NOT WRITE BELOW THIS UNE
#
Submittal
Req'd Rec'd TRACKING
PERMIT FEES
Plan Sets
a Plan Check submittedI IQ%
Item Amount
Structural Calcs.
Reviewed, ready for corrections j?)
Plan Check Deposit
Truss Calcs.
Called Contact Person
Plan Check Balance
Title 24 Calcs.
Plans picked up
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
•2a0 Review, ready for correctiionif'-
Electrical
Subcontactor List
C Iled Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
'`' Review, ready for correctionsrL%ue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr.
Date of permit issue
School Fees
Total Permit Fees
Monarch Management Group
A DIVISION OF THE MANAGEMENT TRUST
Westward :Isle Ho:rneowner's Association
.December 16,.201.1
Penny EnglishLeMay
Re: 80=161 Palm.Circle-Drive:Architectural Application
'Dear Mrs..English :LeMay:
The',Architectural..Committee:at"their.most recent meeting:has:decided'.to:
approve your application :for the,additionslo your condo --as submitted by
.your application.with...tle following ;conditions:.
1; 'Contractor.must.providernanagement.with a:copy of :the ,cortractor's
license ..
. '2:..Contractor:must:providemanagement with copy.of their insurance
3: Contr-actor must:.provide-.a.copy of:city permit. rior to commencing : -work..
We appreciateyou .following':the Architectural:Guidelines =by .completing :.the
application and thankyou<for•your patience:duringthe re�iew.and approval
process.
Should ave.:any further ,ouestions, please ,.submit:them in -writi i,g :to `,the
Ar itectural ommitt .
Sin ere
e `•Westward Is% .CommunityAssociation
Architectural Control::Committee
Cc: Board..of :Directors
Unit.
39755 Berkey Drive,.Suite'A, Palm Desert, California 92211
CONNECTING PEOPLE TO THE PROMISE.. PH: 760:776.5100 FA: 760.776.5111
' www.monarchman.agEment.com ..
I
CITY OF LA QUINTA§UB-CONTRACTOR LIST
JOB ADDRESS gd i -1 b l am+ e i tL e�� V; PERMIT NUMBER OWNER CA-ii.ol E_ BUILDER
This form shall be posted on the job with the Building Inspection Card at all times in a conspicuous place. Only persons appearing on this list or their employees are authorized to work
on this job. Any changes to. this list must be approved by the Building Division prior to commencement of work. Failure to comply will result in a stoppage of work- and/or the voidance
of building permit. For each.applicable trade, all information reauested below must be comnleted by annlicant- "On File" is not an accentable response.
Tradi : / Classi kation
Contractor:..
; .: State Contractor s License
VYorkers Compensation Insurance Ci ' .:Busir ess License.
Company Name
Classification
(e.g. A, B, C-8)
License Number
(xxxxxx)•
Exp. Date
(xx/xx/xx)
Carrier Name
(e.g. State Fund, CalComp)
Policy Number;
(Format Varies)
Exp. Date License Number
(xx/xx/xx). (xxxx)
Exp. Date
(xx/xx/xx)
EARTHWORK (G-12)
:'CONCRETE (C-8)
Leu
3
%7 3 u;j f
D/ 13i 1.b14
5 , A7 -L% N lJ
18142J,74-
3D•/ .
FRAMING (C-5')
V
7
STRUCT. STEEL (C=511
MASONRY (C=29)
PLUMBING (C-36)
-
LATH; PLASTER (C-35)
C=E V 1 C� U
l�
'7 1 S r3 5
5��� �� .0 v
% 3 9c> �
..DRYWALL (C-9)
L� V 1 EL p
)�
-� •� S �S
��R�� v�
iu 0 81.7
HVAC (C-20)
ELECTRICAL (6-10)
73
.
ra� �
ROOFING (C=39)
:SHEET METAL (C-43)
FL6.0RING (C=15)
GLAZING. (C-17)
�,f 1 4 CU
3 S� S
��.+�T� F—vl
/ 7.y
INSULATIORIC72)
.SEWAGE D.I.S.P. (C-42)
PAINTING (C-33)
CERAMIC TILE (C-54)
CABINETS . (C-6)
FENCING (C-13)
LANDSCAPING (C=27)
.POOL (C-53)
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Lemay Residence
80161 Palm Circle Drive
La Quinta, CA
Project Designer:
Report Prepared by:
Joan D. Hacker
Insu-form, Inc.
77-810 Las Montanas Road, Suite 201
Palm Desert, Ca 92211
• �:c]EI5�2
EI�
MAR 0 6 2012
®L BY:
CITY OF LA QUINTA
BUILDING & SAFETY DEPT. Job Number:
APPROVED
FOR CONSTRUCTION
oA o By ` Date:
2/29/2012
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
Energ Pro 5.1 by Energ Soft User Number. 2655 RunCode: 2012-02-29T10:26:28 ID:
j
.
BUILDING ENERGY ANALYSIS REPORT
PROJECT:
Lemay Residence
80161 Palm Circle Drive
La Quinta, CA
Project Designer:
Report Prepared by:
Joan D. Hacker
Insu-form, Inc.
77-810 Las Montanas Road, Suite 201
Palm Desert, Ca 92211
• �:c]EI5�2
EI�
MAR 0 6 2012
®L BY:
CITY OF LA QUINTA
BUILDING & SAFETY DEPT. Job Number:
APPROVED
FOR CONSTRUCTION
oA o By ` Date:
2/29/2012
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
Energ Pro 5.1 by Energ Soft User Number. 2655 RunCode: 2012-02-29T10:26:28 ID:
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF-1 R Certificate of Compliance 3
Form MF-1 R Mandatory Measures Summary 9.
HVAC System Heating and Cooling Loads Summary 12
Ir ,
I
EnergyPro 5.1 by EnergySoft Job Number: ID: User Number: 2655
r
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Lemay Residence
Building Type m Single Family ❑ Addition Alone
o Multi Family ® Existing+ Addition/Alteration
Date
212.9/2012
Project Address
80161 Palm Circle Drive La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. FloorArea
1, 878
Addition
158
# of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION
Construction Type
Area Special
Cavity ( Features see Part 2 of 5)' Status
Slab Unheated Slab -on -Grade
None 1,720 Perim = 63' Existing
Wall Wood Framed
R-11 858 Existing
Door Opaque Door
None 20 Existing
Roof Wood Framed Attic
R-22 1,720 Exiving
Slab Unheated Slab -on -Grade
None 158 Perim = 15' New
Wall Wood Framed
R-13 572 New
Roof Wood Framed Attic
R-38 158 New
FENESTRATION U- Exterior
Orientation Area Factor SHGC Overhang Sidefins Shades Status
Front (NW) 20.0 0.710
0.73 2.0 none Bug Screen Existing
Front (NVt9 30.0 0.710
0.73 2.0 none Bug Screen Existing
Left (NE) 9.0 0.710
0.73 2.0 none Bug Screen Existing
Left (NE) 30.0 0.710
0.73 2.0 none Bug Screen Existing
Left (NE) 30.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (SE) 40.0 0.710
0.73 2.0 none Bug Screen Existing
Rear (SE) 40.0 0.710
0.73 2.0 none Bug Screen Existing
Right (SW) 40.0 0.710
0.73 2.0 none Bug Screen Existing
Right (SlAq 3.0 0.710
0.73 2.0 none Bug Screen Existing
Right (SKO 20.0 0.710
0.73 2.0 none Bug Screen Existing
Front (NV19 20.0 0.710
0.73 2.0 none Bug Screen New
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
1 Central Furnace 78% AFUE
Packaged Air Condition. 12.0 SEER Setback Existing
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
Living Zone Ducted
Ducted Attic, Ceiling Ins, vented 4.2 Existing
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
EnergyPro 5.1 by EnergySoft User Number., 2655
RunCode: 2012-02-29T10:26:28 ID:
Page 3 of 12
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Lemay Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration 1212912012
Date
Project Address
80161 Palm Circle Drive La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
1,878
Addition
158
# of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form.
❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION Area Special
Construction Type Cavity (ft) Features see Part 2 of 5 Status
FENESTRATION U- Exterior
Orientation Area Factor SHGC overhang Sidefins Shades Status
Rear (SE) 24.0 0.710 0.73 2.0 none Bug Screen New
Rear (SE) 17.8 0.710 0.73 2.0 none Bug Screen New
Rear (SE) 16.0 0.710 0.73 10.0 none Bug Screen New
HVAC SYSTEMS
Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status
HVAC DISTRIBUTION Duct
Location Heating Cooling Duct Location R -Value Status
WATER HEATING
Ot . Type Gallons Min. Eff Distribution Status
EnergyPro 5.1 by EnergySoft User Number. 2655 RunCode: 2012-02-29710:26:28 ID:
Page 4 of 12
PERFORMANCE CERTIFICATE: Residential (Part 2 of 5) CF -1 R
Project Name
Lemay Residence
Building Type ®Single Family ❑Addition Alone
❑ Multi Family ® Existing+ Addition/Alteration
Date
2/29/2012
SPECIAL FEATURES INSPECTION CHECKLIST
The enforcement agency should pay special attention to the items specified in this checklist. These items require special written
justification and documentation, and special verification to be used with the performance approach. The enforcement agency
determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of
the special justification and documentation submitted.
HERS REQUIRED. VERIFICATION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a
completed CF -4R form for each of the measures listed below for final to be given.
EnemvPro 5.1 by EnemySoft User Number., 2655 RunCode: 2012-02-29710:26:28 ID: Pace 5 of 12
PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF -1 R
Project Name
Building Type m Single Family ❑ Addition Alone
Date
Lemay Residence
❑ Multi Family m Existing+ Addition/Alteration
1212912012
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV kBtu/ft2- r
Space Heating 8.01 7.50 0.52
Space Cooling 131.02 123.01 8.01
Fans 28.96 27.18 1.78
Domestic Hot Water 19.08 19.08 0.00
Pumps 0.00 0.00 0.00
Totals 187.07 176.76 10.31
.Percent Better Than Standard: 5.5 %
BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED .
Fenestration
Building Front Orientation: (NW) 315 deg Ext. Walls/Roof Wall Area Area
Number of Dwelling Units: too (NKK 480 70
Fuel Available at Site: Natural Gas (NE) 610 69
Raised Floor Area: 0 (SE) 270 58
Slab on Grade Area: 1.878 (SIAQ 350 63
Average Ceiling Height: 8.0 Roof 1,878 0
Fenestration Average U -Factor: 0.71 TOTAL: 260
Average SHGC: 0.73 Fenestration/CFA Ratio: 13.8 %
REMARKS
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the
Efficiency Standards of the California Code of Regulations.
h.
The documentation author hereby certifies that the documentation is accurate and complete.
.Documentation Author
Company Insu-form, Inc.
229/2012
Address 77--810 Las Montanas Road, Suite 201 Name Joan D. Hacker
City/State/ZipCity/State/Zip Palm Desert, Ca 92211 Phone 760-345-1352 Signed Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require
installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Company c' n 1' G Z
Address g • �$i b(, G1�f G� �%� • Name �N v
City/State/Zip p� 'LZD ( Phone Signed License # -'-----Date
C1� 1 74v Ll J�-7 g
EnemyPro 5.1 by Enem ySoft User Number: 2655 RunCode: 2012-02-29T10:26:28 ID: Pa;e 6 of 12
CERTIFICATE OF COMPLIANCE:
Residential (Part 4 of 5) CF -1 R
Project Name
Lemay Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family la Existing+ Addition/Alteration
Date
2/29/2012
OPAQUE SURFACE DETAILS
Surface
Type Area
U- Insulation
I Factor Cavity Exterior Frame Interiorl Frame Azm
Joint Appendix
Tilt Status 4 Location/Comments
Slab
1,720
0.730 None
0
180 Existing 4.4.7-A1
Existing Living
Wall
290
0.110 R-11
315
90 Existing 4.3.1-A2
Existing Living
Door
20
1.450 None
315
90 Existing 4.5.1-A1
Existing Living
Wall
281
0.110 R-11
45
90 Existing 4.3.1-A2
Existing Living
Wall
390
0.110 R-11
135
90 Remove 4.3.1-A2
Existing Living
Wall
287
0.110 R-11
225
90 Existing4.3.1-A2
ExistingLiving
Roof
1,720
0.043 R-22
315
0 Existing4.2.1-A6
ExistingLiving
Wall
100
0.110 R-11
45
90 Remove 4.3.1-A2
ExistingLiving
Slab
158
0.730 None
0
180 New 4.4.7-A 1
Addition
Wall
100
0.102 R-13
315
90 New 4.3.1-A3
Addition
Wall
260
0.102 R-13
45
90 New 4.3.1-A3
Addition
Roof
158
0.025 R-38
3151
0 New 4.2.1-A21
Addition
Wall
961
0.102 R-13
135
90 111New 4.3.1-A3
Addition
Wall
116
0.102 R-13
135
90 New 4.3.1-A3
Addition
FENESTRATION SURFACE DETAILS
ID
Type
Area U -Factor
SHGC
Azm Status
Glazing Type
Location/Comments
1
Window
20.0 0.710 Default
0.73 Default
315 Existing
Double Metal Clear
Existing Living
2
Window
30.0 0.710 Default
0.73 Default
315 Existing
Double Metal Clear
Existing Living
3
4
Window
Window
9.0 0.710 Default
30.0 0.710 Default
0.73 Default
0.73 Default
45 Existing
45 Existing
Double Metal Clear
Double Metal Clear
Existing Living
Existing Living
5
Window
30.0 0.710 Default
1 0.73 Default
1 45 Existing
Double Metal Clear
Existing Living
6
Window
40.0 0.710 Default
0.73 Default
135 Existing
Double Metal Clear
Existing Living
7
Window
40.0 0.710 Default
0.73 Default
135 Existing
Double Metal Clear
Existing Living
8
9
Window
Window
40.0 0.710 Default
3.0 0.710 Default
0.73 Default
0.73 Default
225 Existing
225 Existing
Double Metal Clear
Double Metal Clear
Existing Living
Existing Living
10
Window
20.0 0.710 Default
0.73 Default
225 Existing
Double Metal Clear
Existing Living
11
Window
20.0 0.710 Default
0.73 Default
315 New
Double Metal Clear
Addition
12
Window
24.0 0.710 Default
0.73 Default
135 New
Double Metal Clear
Addition
13
Window
17.8 0.710 Default
0.73 Default
135 New
Double Metal Clear
Addition
14
Window
16.0 0.710 Default
0.73 Default
135 New
Double Metal Clear
Addition
(1) Ll -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value
2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type SHGC
Window
H t Wd
Ove hanq Left Fin
Len Hat LEA I RExt Dist Len
Ri ht Fin
H t Dist Len H t
1
Bug Screen
0.76
4.0 5.0
2.0 0.1
2.01 2.0
2
Bug Screen
0.76
5.0 6.0
2.0 0.1
2.01 2.0
3
Bug Screen
0.76
3.0 3.0
2.0 0.1
2.01 2.0
4
Bug Screen
0.76
5.0 6.0
2.0 0.1
2.01 2.0
5
Bug Screen
0.76
5.0 6.0
2.0 0.1
2.0 2.0
6
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
7
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
8
Bug Screen
0.76
6.8 6.0
2.0 0.1
2.0 2.0
9
Bug Screen
0.76
1.0 3.0
2.0 0.1
2.0 2.0
10
Bug Screen
0.76
5.0 4.0
2.0 0.1
2.0 2.0
11
Bug Screen
0.76
4.01 3.0
2.01 0.1
2.0 2.0
12
Bug Screen
0.76
4.01 6.0
2.01 0.1
2.01 2.0
13
Bug Screen
0.76
4.0 5.0
2.01 0.1
2.0 2.0
14
Bug Screen
0.76
4.0 4.0
10.0 0.1 10.0 10.0
EnergyPro
5.1 by EnergySoft User Number. 2655 RunCode: 2012-02-29710:26:28 ID:
Pa. e 7 of 12
CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5) CF -1 R
Project Name
Lemay Residence
Building Type ❑ Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
1212912012
BUILDING ZONE INFORMATION
System Name Zone Name
Floor Area
New Existinq Altered Removed Volume Year Built
Living Zone Existing Living
1,720 13,760 1981
Addition
158 1,264
Totals 1 1581 1,7201 01 0
HVAC SYSTEMS
System Name Qty. I Heating Type
Min. Eff. Coolin Type Min. Eff. Thermostat Type Status
Living Zone 1 Central Furnace
78% AFUE Packaged Air Conditione 12.0 SEER Setback Existing
HVAC DISTRIBUTION
System Name Heating
Duct Ducts
Cooling Duct Location Tested?
Status
Living Zone Ducted
-R-Value
Ducted Attic, Ceiling Ins, vented 4.2 ❑
Existing
WATER HEATING SYSTEMS
S stem Name
Qty.
Type
Distribution
Rated
Input
Btuh
Tank
Cap.
al
Energy
Factor
or RE
Standby
Loss or
Pilot
Ext.
Tank
Insul. R-
Value.
Status
Standard Gas 50 gal or Le
1
Small Gas
No Pipe Insulation
40,000
50
0.53
Ma
n/a
Existing
MULTI -FAMILY WATER
HEATING
DETAILS
HYDRONIC
HEATING
SYSTEM
PIPING
Control
Hot Water Piping Length
_ o
m
Q —
System Name
Pipe
Len th
Pipe
Diameter
Insul.
Thick.
Qt . HP
Plenum Outside
Buried
EnerqyPro 5.1 by EnergySoft User Number.- 2655
RunCode: 2012-02-29710:26:28 ID: Page 8 of 12
MANDATORY MEASURES SUMMARY- Residential Pae 1 of 3 MF -1 R
Project Name
Lemay Residence
Date
2/29/2012
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF -
1 R -ALT Form) shall supersede the items marked with an asterisk (') below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with plans.
Building Envelope Measures:
116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leaka e.
§116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC and infiltration that meets the requirements of 10-111 (a).
117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form.
§118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(1) when the
installation of a Cool Roof is specified on the CF -1 R Form.
' 150 a : Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor.
150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value.
*§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent U -factor.
*§1 50 d : Minimum R-13 insulation in raised wood -frame floor orequivalent U -factor.
150(f): Air retarding wrap is tested, labeled, and installed according to ASTM E1677-95 2000 when specified on the CF -1 R Form.
150 : Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance
rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
150 e 1 A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device.
§150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the
outside of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backflow prevention, pump isolation valve and recirculation loop connection requirements of §113(c)5.
§115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and
spa heaters.
150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c).
§1500)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§1500)113: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the
tank.
§1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 150-13.
§150(j)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150-B and Equation 150-A.
§1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table
123-A.
150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
§1500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
EnergyPro 5.1 by EnergySoft User Number.- 2655 RunCode: 2012-02-29710:26:28 ID: Page 9 of 12
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R
Project Name
Date
Lemay Residence
2/29/2012
§150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections
601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the
applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is
used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used
§150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than scaled
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities End support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7: Exhaust fans stems have back draft or automatic dampers.
§150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated
dampers.
§150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
150 m 10: Flexible ducts cannot have porous inner cores.
§150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air
Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation
required in Section 4 of that Standard.
Pool and Spa Heating Systems and Equipment Measures:
§114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance heating ora pilot light.
§114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines, or built-up connections for future solar heating.
114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover.
§114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that Mll allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
150 : Residential pool systems orequipment meet the pump sizing, flow ratepiping,filters, and valve requirements of §150'
Residential Lighting Measures:
§150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies
contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2.
150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d).
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line -
voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by F1 30(d), and shall not contain a
medium screw -base socket.
150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k).
150(k)7: All switching devices and controls shall meet the requirements of §150(k)7.
§150(k)8: A minimum of 50 percent of the total rated wattage.of permanently installed lighting in kitchen.; shall be high efficacy.
EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be
exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant
sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed
luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high effitacy and controlled by a
manual -on occupant sensor.
§150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number. 2655 RunCode: 2012-02-29T10:26:28 ID: Page 10 of 12
MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R
Project Name
Date
Lemay Residence
2/29/2012
§150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on
occupant sensor certified to comply with the applicable requirements of §119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual -on occupancy sensor.
§150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms,
closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual -
on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with §150 k 11.
§150(k)l2: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more
dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor,
and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management
control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor
luminaires used to comply with Exceptionl to §150(k)l3 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not
be high efficacy luminaires.
§150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no
more than five watts of power as determined according to 4130(d).
§150(k)l5: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable
requirements of Sections 130, 131, 134 and 146.
§150(k)l6: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119.
EnergyPro 5.1 by EnergySoft User Number.- 2655 RunCode: 2012-02-29710:26:28 ID: Pag_- 11 of 12
HVAC SYSTEM HEATING AND. COOLING LOADS SUMMARY.
Project, Name Date
Lemay Residence ..:: 2/29/2012
System. Name
Floor Area -
Living Zone 1,878
ENGINEERING. CHECKS. SYSTEM LOAD
Number of`S stems 1 COIL COOLING PEAK COIL HTG: PEAK
Heating S stemCFM Sensible Latent' CFM _ Sensible -
Output perSystem 70,000 Total.Room Loads 1,283 33;214 2,927 535 •27;22§
7.
Total Output Btuh -70,000 :Return Vented. Lighting-
Output
ighting Out ut Btuh/s ft 37.3 Return Air. Ducts 21816 1,9.35
Cooling System:
•. Return Fan 0 p
Output per System .47,000 Ventilation F 0 0 0: 0 0
Total Out ut Btuh 47,000
Supply Fan. 0
0
Total Output Tons .3.9 Supply Air Ducts" 2,816 1,935
Total Output Btuh/s ft 25.0
Total Output (s ft/Ton 479.5 TOTAL SYSTEM LOAD 1 .38,847 r 2,92731,098
Air System
CFM per System 1,300 HVAC EQUIPMENT SELECTION
Airflow (cfm) .1,300 Existing HVAC .39,184 580 70,000
Airflow cfm/s ft 0.69 "
Airflow dfmrron 331.9
Outside Air. (%) 0.0% Total Adjusted System Output 39,184 580 70,000
Outside Air (cfm/s ft) 0.00 (Adjusted for Peak Design.conditions)
Note: values above iven"at ARI conditions TIME OF SYSTEM PEAK Aug 3 PM Jan1 AM
HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of.Heatin .Peak
26.*F 69 OF 119'°F. " 119 of .,
.0utside Air
0 cfm Heating Coil Supply Fan
1;300 cfrri. 118.9F.
ROOM
69 OF 70 OF
COOLING SYSTEM PSYCHROMETICS Airstrearn Temperatures at Time of Coolie Peak
1124 78 OF 80162 OF 52 / 50 OF 52/50 OF
. ESTIMATE _
•
Ernesto Sand ez DATE: APRIL 18, 2012
68075 Ilia Domingo St.
Desert Hot Springs, CA 92240 Y
Cell: (760) -660-3512 t `
BILL Car -:)l English Le May
TO 80-161 Palm Circle Dr.
' La Quinta, CA 92253
Phane: (847) 331-8198,
ORDER DATE ORDER NUMBER T� JOB
Extension cf livingroom and. '
bedroom was. i
�YITEM # DESCRIPTION QUANTITY
1----
t 1 R_Demo walls and patio ceilings 500.00
�2 i Remove and install concrete slab 1700.00
3 +� Framing new wallsY 1500.00_y �
4 N M � Plaster "stucco" - t 1700.00
5 � A sInsulation (walls and ceiling) �— 400.00
}-6 ? Install new A/C ducts, vents, and vent plates 700.00
17 Y� Drywall and texture �^. 800.00
8 Supervision W f 1500.00
! 9. Clean up -� 300.00
1 10 Building permit 286:00
ti $9386.00
7r