The URL can be used to link to this page

08-0035 (AR)P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number: C08-00000035 Property Address: 51525 AVENIDA JUAREZ APN: 773-042-026-13 -000000- Application description: ADDITION - RESIDENTIAL Property Zoning: MEDIUM DENSITY RES Application valuation: 15893' Applicant: Architect or Engineer: LICENSED CONTRACTOR'S DECLARATION } BUILDING & SAFETY DEPARTMENT BUILDING PERMIT I hereby affirm under penalty of perjivy that I a Iiceneod under provisions of Chapter 9 (commencing with Se6tion 7000) of Division 3 of the Business a Professionals Caae, and my License is in full force and effect. License Class: - - - - - - - - - Licens OTAGE Date:/ Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the.applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ I I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). ( ) I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPE%'%IIT_—•-- VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 3/24/08 Owner: MORRIS RICK E Other struct in C J Contractor: Owner MA�2n4 DITION C ._?0O B Lic. No.: E FO -P, 44 ------------------ WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier NO Policy Number I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to ecome subject to the workers' compensation laws of California, and agree that, if I should be me subject to the workers' compensation provisions of Section `��ff�� 3700�the Labor Code, I all forthwith compTwith those: provisions. Date: ✓ Jy,� Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL ,SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($ 100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees'for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result. of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the a e information is correct. I agree to comply with all city and county ordinances and state laws relating to buildi onstruction, and hereby authorize representatives of this county to enteyupon the above-mentioned propert r inspection purposes. Date: ��2�� Signature (Applicant or Agent): I Application Number . . . . . 08-00000035 Permit . . . . . BUILDING PERMIT Additional desc . Permit Fee . . . . 171.00 Plan Check Fee 111.15 Issue Date . . . . Valuation 15893 Expiration Date 9/20/08 Qty Unit Charge Per Extension BASE FEE 45.00 14.00 9.0000 ---------------------------------------------------------------------------- THOU BLDG 2,001-25,000 126.00 Permit . . . ELECT - ADD/ALT/REM Additional desc . Permit Fee . . . . 23.26 Plan Check Fee 5.82 Issue Date Valuation 0 Expiration Date 9/20/08 Qty Unit Charge Per Extension BASE FEE 15.00 236.00 .0350 ---------------------------------------------------------------------------- ELEC NEW RES - 1 OR 2 FAMILY 8.26 Permit . . . GRADING PERMIT Additional desc . Permit Fee . . . . 15.00 Plan Check Fee .00 Issue Date- Valuation . . . . 0 Expiration Date 9/20/08 Qty Unit Charge Per Extension` ---------------------------------------------------------------------------- BASE FEE 15.00 . Permit . . . MECHANICAL Additional desc . Permit Fee . . . . 24.00 Plan Check Fee 6.00 Issue Date Valuation . . . . 0 Expiration Date 9/20/08 Qty Unit Charge Per Extension BASE FEE 15.00 1.00 9.0000 ---------------------------------------------------------------------------- EA MECH APPL REP/ALT/ADD 9.00 Permit PLUMBING Additional desc . Permit Fee . . . . 24.0.0 Plan Check Fee 6.00 Issue Date . . . . Valuation . . . . 0 LQPERMIT. _-------- LQPE%IIIT Application Number . . . . . 08-00000035 Permit PLUMBING Expiration Date 9/20/08 Qty Unit Charge Per Extension BASE FEE 15.00. 1.00 6.0000 EA PLB FIXTURE 6.00 1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00 ------------------------------------------=--------------------------------- Special Notes and Comments 236 SQ. FT. KITCHEN ADDITION AND 180 SQ. FT. PATIO WITH BBQ AREA NO GAS LINE FOR BBQ WILL USE BOTTLE GAS. ---------------------------------------------------------------------------- Other Fees . . . . . . . . . ENERGY REVIEW FEE 11.12 STRONG MOTION (SMI) - RES 1.58 Fee summary Charged ----------------- ---------- Paid Credited ---------- --- ------ ---------- Due Permit Fee Total 257.26' .00 .00 257_.26• Plan Check Total 128.97 .00 .00 128.9.7 Other Fee 'Total 12.70 .00 .00 12.70• Grand Total 398.93 .00 .00 398.93 I Bin #„ City of La .Quinta Building U Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # Off- 3 S Project Address: 5'L 1; A. P. Number: _ , , OZ Legal Description: Owner's Name: Address:. 5l l< Yt16 ei J LA City, ST; Zip: -3 Contractor:. Contractor: C(/ Address: —6 cl J City, ST, Zip: q.la_ 3 . Telephone: � Project Description: Telephone: 7 (s - State Lic. # : City Lic: #.. Arch.; Engr., Designer: %�kk. e A C6Av_ Address: 7 a . City, ST, Zip: `� Z J Telephone: State Lic. #: Name of Contact Person: S lt2� Construction Type: Occupancy: Project.type (circle one): New . ild' A1�r Repair Demo Sq. Ft:: # Stories: Z # Units: Telephone # of Contact Person: Estimated Value of Project: APPLICANT:. DO NOT WRITE BELOW THIS LINE # Submittal Plan Sets Req'd Recd TRACIQNG . Plan Check submitted . PERMIT FEES Item'' Amount Plan Check Deposit Structural Calcs. Reviewed, ready for correcirons ; 2 Truss Calcs. Called Contact Person j Plan Check Balance Energy Calcs. Plans picked up,, % Construction Flood plain plan Plans resubmitted IL Mechanical Grading plan 2•" Review, readyor correctionsfiss Electrical Subcontactor List Called Contact Pe rso 2� Plumbing Grant Deed Plans picked up'S M I H.O.A. Approval. Plans resubmitted Grading IN HOUSE:- 7rd Review, ready for correction issue Developerlin p Fee Planning Approval Called Contact Person A.LP.P. _ Pub. Wks. Appr Date of permit issue — I School Fees • - / � , U �El S FI Total Permit Fees 1�24(a� KFC,3�l)io� Unit 2 Unit 7 Unit 3 Unit 8 Unit 4 Unit 9 Unit 5 Unit 10 Comments ; i At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patiostwalkways, residential additions under 5 00 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile ho mes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason: Residential Addition 500 Sq Feet or Less EXEMPT This certifies that school facility fees imposed pursuant to Education Code Section 17620 and Government Code 65995 Et Seq. in the amount of $0.00 X 236 S.F. or $0.00 have been paid for the property listed above and that I building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued. Fees Paid By Exempt - Rick Morris Check No. ` Name on the check Telephone Funding Exempt By Dr. Sharon P. McGehee Superintendent Fee collected /exem by S r Ivrey Payment Recd 1$0.0,0-' Ever/Under."- = Signature NOTICE: Pursuant to Government Code Section 66020(d)( , this 'll serve to notify you that the 90 -day approval period in which you'may protest the fees o ` r other payment identified above will begin to run from the date which the building or installation permit for this project is issued, or from the date on which I) those amounts are paid to the District(s) or to another public entity authorized to collect them on the Districtfs) behalf, whichever is earlier. NOTICE: This Document NOT VALID without embossed seal i Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting I r TITLE. 24 REPORT a tM l Title 24 Report PRESCRIPTIVE PACKAGE D ALTERNATIVE CITY OF LA QUINTA BUILDING & SAFM DEPT, e�PPP, VES Title 24 Re rt f6�'P C, -)NST UCTI N DATF �2-rb �$ BYRICK& SHELLY ORRI__ 51-525 Avenida Juarez La Quinta, California Project Designer: Stephen R. Nieto South West Concepts. Inc 78-115 Calle Estado, Ste. 201 La Quinta, CA 92253 Report Prepared By: Stephen R. Nieto Date: 01/04/2008 JAN 4 M8 CERTIFICATE OF COMPLIANCE: RESIDENTIAL (Page 1 of 5) CF -1R Pr6ject Title PROPOSED ADDITION FOR RICK & SHELLY MORRIS Date 01/04/2008 Building Permit # Pr oj,ect Address 51-525 AVENIDA JUAREZ, LA QUINTA, CA 92253 4 Plan Check / Date Documentation Author SOUTH WEST CONCEPTS, INC. Telephone 760 564-4707 Field Check / Date Compliance Method (Prescriptive) PACKAGE D Climate Zone 15 Enforcement Agency Use Only Altetnative Component Package Method: (check one) C D ./ 4Alternative) • Package C and Package D choices require HERS rater field verification and/or diagnostic testing (see CF -1R page 3) • For Package D Alternative see Appendix B Table 151-C Footnotes 8-14 in the Residential Compliance Manual (RCM) GENERAL INFORMATION Total Conditioned Floor Area (CFA) 236 ft' Average Ceiling Height: 10'-6" ft Check Applicable Boxes Building Type: (check one or more) Single Family Multifamily ✓ Addition Alteration (If adding fenestration fill out WS -4R, Fenestration Maximum Allowed Area Worksheet and see Section 8.3.2 for Additions and 8.3.3 for Alterations in the RCM.) • Maximum Allowed Total Fenestration Area 47.2 ft'(from WS -4R) • Maximum Allowed West Facing Fenestration Area 11.8 ft'(from WS -4R) • Number of Stories: 1 Number of Dwelling Units: 1 • Floor Construction Type: Slab Raised Floor (circle one or both) • Front Orientation: 3150 North / South East West: All Orientations (input front orientation in degrees from True North and circle one). ® RADIANT BARRIER (check box if required in climate zones 2 4 8-15) OPAQUE SURFACES INCLUDING OPAQUE DOORS Component Type (Wall, Roof, Floor, Slab Edge, Doors) Frame Type (Wood or Metal) Cavity Insulation R -Value Continuous Insulation R -Value Assembly U - factor (for wood, metal frame and mass assemblies)' Joint Roof Radiant Location .Appendix Barrier Comments IV Installed (attic, garage, Reference Yes or No typical. etc. Wall 2X6 WOOD R-21 NONE N/A LIVING ZONE Wall Roof 2X12 WOO R-38 NONE 0.025 IV.1 YES LIVING ZONE Roof Floor -Floor ,51ab Edge 1) See Joint Appendix IV in Section IV.2, IV.3 and IVA, which is the basis for the U -factor criterion. U -factors can not exceed prescriptive value to show equivalence to R -values. This column is for the Inspector to verify installation of roof radiant barrier. Residential Compliance Forms December 2005 CERTIFICATE OF COMPLIANCE: RESIDENTIAL (Page 2 of 5) CF -1R Project Title Date PROPOSED ADDITION FOR RICK & SHELLY MORRIS 01/04/2008 ]RHESTRATION PRODUCTS - U -FACTOR AND SHGC i 1� W FENESTRATION MAXIMUM ALLOWED AREA WORKSHEET WS -4R - must be included for New Construction, Additions and Alterations. 1 2 Fenestration #/Type/Pos. (Front, Left, Rear, Right, Skylight) Orien- tation, N, S, E, W' area ft' U -factor' U -factor Source' SHGC' SHGC Sources Exterior Shading/Overhangs6'' ✓box if WS -3R is included RIGHT N 20 SQ. FT. 0.55 NFRC R04032 0.26 NFRC R04032 ❑ FRONT E 14 SQ. FT. 0.55 NFRC R04032 0.26 NFRC R04032El ❑ El 11 El 1) Skylights are now included in West -facing fenestration area if the skylights are tilted to the west or tilted in any direction when the pitch is less than 1:12. See §151(03C and in Section 3.2.3 of the Residential Manual 2) Enter values in this column are either NFRC Rated value or from Standards default Table 116A. 3) Indicate source either from NFRC or Table I I 6 4) Enter values in this column from NFRC or from Standards Default Table 1.16B or adjusted SHGC from WS -3R 5) Indicate source either from NFRC or Table I I6B. 6) Shading Devices are defined in Table 3-3 in the Residential Manual and see WS -3R to calculate Exterior Shading devices. 7) See Section 3.2.4 in the Residential Manual. HVAC SYSTEMS Heating Equipment Type and Capacity f imace, heat pump, boiler, etc.) Minimum Distribution Efficiency Type and Location AFUE or HSPF ducts attic etc. Duct or Piping Thermostat R -Value Type Configuration (split or package) EXISTING Cooling Equipment Type and Capacity Minimum (A/C, heat pump, evap. Efficiency cooling) SEER or EER Distribution Type and Location Duct or Piping ducts, attics, etc.) R -Value Thermostat Tye Configuration (split or package) EXISTING Residential Compliance Forms December 2005 CERTIFICATE OF COMPLIANCE: RESIDENTIAL (Page 3 of 5) CF -1R Project Title Date PRQPOSED ADDITION FOR RICK & SHELLY MORRIS 01/04/2008 �c,FULl,' u LPu%_ i J anu l Ays for Anernatlye 1yleasures) A'§ikned CF -4R Form must be provided to the building department for each home for which the following. are required. I e I ❑ Sealed Ducts all climate zones Installer testing and certification and HERS rater field verification required.) ❑ TXVs, readily accessible (climate zones 2 and 8-15 only) ❑ Installer te ting and certification and HERS Rater field verification required.) ❑ Refrigerant Charge (climate zones 2 and 8-15 only) (Installer testing and certification and HERS Rater field EXISTING verification required.) VK Alternative to Sealed Ducts and Refrigerant Charge /TXVs (See Package D Alternative Package Features for Project Climate Zone in the RM Appendix B Table 151-C, Footnotes 7-14. ❑ No ducts installed. ❑ New ducts from existing s ace conditioning equipment, not exceeding 40 ft. in length. ❑ For additions and alterations, duct systems that are not documented to have been previously ❑ sealed as confirmed through field verification and diagnostic testing in accordance with procedures in the EXISTING Residential ACM Manual. Duct systems with more than 40 linear feet in unconditioned ❑ spaces shall meet the requirements of Section 150(m) and duct insulation requirements of Package D. �WAI K n A11AU JYJlEl N I V/ I ® Check box if system meets criteria of a "Standard" system. Standard system is one gas-fired water heater per dwelling unit. If the water heater is a storage type, 50 gallons is the maximum capacity and recirculation system is Number in System not allowed. ❑ Check box when using Preapproved Alternative Water Heating table, Table 5-4 in Chapter 5 in the Residential Standby' Loss % Manual. No water heating calculations are required, and the system complies automatically. EXISTING Check box if system does not meet criteria of "Standard" system, and does not comply with the Preapproved ❑ Alternative Water Heating table. In this case, the Performance Method must be used and must be included in the submittal. Check box to verify that a time control is required for a recirculating system pump for a system serving multiple units ❑ + Systems serving single dwe ling units (See RM Table 5-4, Alternative Water Heating Systems for recirculation requirements.) Water Heater Type/Fuel Type Distribution Type Number in System Rated Input' (kW or Btu/hr) Tank Capacity (gallons) Energy Factor' or Thermal Efficiency Standby' Loss % Tank External Insulation R -Value EXISTING system Serving multlnie dwelling unite (See Re.quiential Mamial CP( tine 5 1 1) Water Heater Type Distribution Type Number in System Rated Input' (kW or Btu/hr) Tank Capacity (gallons) Energy Factor' or Thermal Efficiency Standby' Loss % Tank External Insulation R -Value EXISTING 1) rvr bi,laai gas siUrage water nesters kratea inputs or Less tnan or equal to /-*),UUU t3tu/hr), electric resistance, and heat pump water heaters, list Energy Factor. For large gas storage water heaters (rated input of greater than 75,000 Btu/hr), list Rated Input, Recovery Efficiency, Thermal Efficiency and Standby Loss. For instantaneous gas water heaters, list Rated Input and Thermal Efficiencies. Pipe Insulation (kitchen lines > 3/4 inches) All hot water pipes from the heating source to the kitchen fixtures that are 3/a inches or greater in diameter shall be thermally insulated as specified by Section 150 0) 2 A or 150 0) 2 B. Residential Compliance Forms December 2005 1 8 CERTIFICATE OF COMPLIANCE: RESIDENTIAL (Page 4 of 5) CF -1R Project Title Date PROPOSED ADDITION FOR RICK & SHELLY MORRIS 01/04/2008 SPECIAL FEATURES REQUIRING BUILDING OFFICIAL or HERS RATER VERIFICATIOr Indicate which special features are part of this project. The list below only represents special features relevant to the preQcriptive method. (Check Applicable boxes) Category Building Official Verification of Special Features HERS Rater Verification HERS Rater Diagnostic Testing Measure Ducts ❑ Y 100% of ducts in crawlspace / basement ❑ Y Buried ducts ❑ Y Diagnostic supply duct location, surface area, and R -value ❑ Y Duct increased R -value ❑ Y Duct leakage ❑ Y Ducts in attic with radiant barriers ❑ Y Less than 12 ft. of duct outside conditioned space ❑ Y Non-standard duct location ❑ Y I Supply registers within two ft. of floor Envelope ❑ Y Air retarding wrap ❑ Y Cool roof ❑ Y Exterior shades ❑ Y High thermal mass ❑ Y Inter -zone ventilation ❑ Y Metal framed walls ❑ Y Non -default vent heights ❑ Y Quality insulation installation ❑ Y Radiant barrier ❑ Y Reduced infiltration (blower door). May also require mechanical ventilation. ❑ Y Solar gain targeting (for sunspaces) ❑ Y Sunspace with interzone surfaces ❑ Y Vent area greater than 10% HVAC E ui ment ❑ Y Adequate air flow ❑ Y Air conditioner size ❑ Y Air handler fan power ❑ Y High EER ❑ Y Hydronic heating systems ❑ Y Mechanical ventilation ❑ Y Refrigerant charge ❑ Y Thermostatic expansion valve (TXV) ❑ Y Zonal control Water Heater ❑ Y Combined hydronic ❑ Y High EF for existing water heaters ❑ Y Non-NAECA water heater ❑ Y Non-standard water heaters (wh/unit) ❑ Y Water heater distribution credits Residential Compliance Forms December 2005 I CERTIFICATE OF COMPLIANCE: RESIDENTIAL (Page 5 of 5) CF -1R Project Title PROPOSED ADDITION FOR RICK & SHELLY MORRIS Date 01/04/2008 Specie, Remarks COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner(per Business and Professions Code Documentation. Author Name: STEPHEN R. NIETO Name: STEPHEN R. NIETO Title/Firm: SOUTH WEST CONCEPTS, INC. Title/Firm: SOUTH WEST CONCEPTS, INC. Address: 78-120 CALLE ESTADO SUITE 206 Address: 78-120 CALLE ESTADO SUITE 206 LA QUINTA CA, 92253 LA QUINTA CA, 92253 Telephone: (760)564-4707 Telephone: (760)564-4707 License #: GC# 523837 License : (if applicable) GC 3837 (signature) (date) (signature) (date) Enforcement Agency Name: Title Agency: Telephone: 'gnature / stamp) Comments: Residential Compliance Forms December 2005 MANDATORY MEASURES SUMMARY: RESIDENTIAL (Page 1 of 2) MF -1R Project Title PROPOSED ADDITION FOR RICK & SHELLY MORRIS Date 01/04/2008 114 U. LUw-nye res,UcnUa, owrU,ngs suDiect to me manaaras must contain these measures regaraiess of the compliance approach used More stringent compliance requirements from the Certificate of Compliance supersede the items marked with an asterisk (*) below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. Instructions: Check or initial applicable boxes when or check NA if not applicable and included with the permit application documentation. DESCRIPTION NA Designer Enforce - ment Building Envelope Measures: Ve V/ lo/ • §150(a): Minimum R-19 in wood frame ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ Wr ❑ §150(b): Loose fill insulation manufacturer's labeled R -Value: Wr ❑ ❑ • §150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not apply to exterior mass walls 11❑ • §150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor. ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. 1. Masonry and factory -built fireplaces have: a. closeable metal or glass door covering the entire opening of the firebox �" ❑ ❑ b. outside air intake with damper and control, flue damper and control ❑ ❑ 2. No continuous burning gas pilot lights allowed Cl Wr ❑ § 150(f): Air retarding wrap installed to comply with § 151 meets requirements specified in the ACM Residential Manual. Wr ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. Wr ❑ ❑ § 1500) : Slab edge insulation - water absorption rate for the insulation material alone without facings no greater than water vapor performance rate no greater than 2.0 perm/inch. Wr ❑ El § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include CF -6R ®. 11 11Form: §116-17: Fenestration Products, Exterior Doors, and Mltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ Wr ❑ 2. Fenestration products (except field -fabricated) have label with certified U -factor, certifies Solar Heat Gain SHGC and infiltration certification El Wr ElCoefficient 3. Exterior doors and windows weather-stripped; all joints and penetrations caulked and sealed ❑ Wr ❑ Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. Wr ❑ ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE. SMACNA or ACCA. 6T ❑ ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ wr ❑ § 1500): Water system pipe and tank insulation and cooling systems like insulation. Wr ❑ ❑ 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation an installed thermal resistance of R-12 or greater. 11 Wr Elhaving 2. Back-up tanks for solar system, unfired storage tanks, or other indirect hot water tanks have R-12 external insulation orEl internal insulation and indicated on the exterior of the tank showingthe R -value. Wr El 3. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. Fust 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length recirculatingsections of hot water pipes shall be insulated to Table 150B. El Wr 11of 2. Cooling System piping (suction, chilled water, or brine lines), piping insulated between heating source and hot water tank shall be insulated to Table 150-B and Equation 150-A. ❑ El 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ Residential Compliance Forms December 2005 L VIANDATORY MEASURES SUMMARY: RESIDENTIAL (Page 2 of 2) MF -1R DESCRIPTION NA Enforce - Designer ment ' Space Conditioning, Water Heating and Plumbing System Measures: (continued) Y 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. ❑ ❑ -z& Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed entirely in El 1:1conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. Wr ❑ ❑ ' § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirement of the CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and retum-air ducts and plenums are insulated to a minimum installed level of R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable ❑ 6T ❑ requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and ❑ Cl platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes ❑ ry 11unless such tae is used in combination with mastic and draw bands. ou 4. Exhaust fan systems have back draft of automatic dampers. ❑ ❑ 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated El❑ wr dampers. 6. Protection of Insulation. insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water ❑ ❑ retardant and provides shielding from solar radiation that can cause degradation of the material. 7. Flexible ducts cannot have porous inner cores. ❑ Wr ❑ §114: Pool and Spa Heating Systems and Equipment. 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the 'heater, ❑ ❑ weatherproof operating instuctions, no electric resistance heating and no pilot light. 2. System is installed with: a. at least 36" of pipe between filter and heater for future solar heating. 6T ❑ ❑ b. cover for outdoor pools or outdoor spas. Wr ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch. ®' ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters, or household cooling appliances have no continuously burning pilot light, (Exception: Non -electrical cooking fiances with pilot < 150 Btu/hr 6T ❑ ❑ § 118(i): Cool Roof material meets specified criteria Wr ❑ ❑ Residential Lighting Measures: § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, and do not contain a medium screw base socket (E24/E26). Ballast for lamps 13 watts or greater ❑ ❑ are electronic and have an output fi-equency no less than 20 kHz § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table El Wr El150-C luminaire has facto installed HID ballast §150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50 percent of the wattage, as determined in § 130 (c), of pemumently installed luminaires in kitchens may be in luminaires that are not high efficacy El ®. 11luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms & utility rooms shall be high efficacy luminaires. OR are controlled by an occupant sensor(s) certified to comply with Section 119(d) that does not turn on ❑ Wr ❑ automatically or have an always ono tion. §1500k 4: Permanently installed luminaires located other than in kitchens, bathrooms, garages, laundry moms, and utility rooms shall be high efficacy luminaires (except closets less than 70fP): OR are controlled by a dimmer switch OR are ❑ El by an occupant sensor that complies with Section 119(d) that does not tum on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are El Wr 11certified airtight to ASTM E283 and labeled as air tight A to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy luminaires (not including lighting around swimming pools / water features or other 680 locations) ❑ Wr 11Article OR are controlled by occupant sensors with integral photo control certified to comply with Section 119d: §150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sec. 130, 132, and 147. Lighting for parkinggarages for 8 or more vehicles shall have lighting that complies with Sec. 130 131, and 146. El❑ wr §150(k)8: Permanently installed Iighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy hm»naires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). Residential Compliance Forms December 2005