Loading...
06-3950 (RC)P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number: Property Address: APN: Application description: Property Zoning: Application valuation: Applicant: 06-00003950 79215 CORPORATE CENTRE DR 649-820-018- - REMODEL - COMMERCIAL COMMERCIAL PARK 1500 c&ty/ - 4 4 a" Architect or Engineer: UCENS; ONTRACTOR'S DECLARATION BUILDING & SAFETY DEPARTMENT BUILDING PERMIT . I hereby affirm under penalty of oe oder pro ' ' apter 9 (commencing with Section 7000) of Division 3 of ts' ode, and my License is in full force and effect. Licensee Class: B-C27LicenseNo.: 390365Date] 1 ontractoR-BUILDER DECLARATIONI hereby affirm under penalty of pt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: I _ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of.proving that he or she did not build or improve for the purpose of sale.). (_) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_) I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPER11fIT VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 11/30/06' Owner: NEIL KLEINE Contractor: KLEINE BUILDING AND DEV I �1 41910 BOARDWALK, SUITE A- PALM DESERT, CA 92211 (760)776-4840 Lic. No.: 390365 Opr 0 - ----=---------------- - ----= Zvi- - - - WORKER'S COMPENSATION DECLA i l}QUA I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' co sation, as rovided for by Section 3700 of the Labor Code, for the performance of the work for whi is rmit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 1769113-2006 1 certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to becom subject to the workers' compensation laws of California, and agree that, if I should bec je the workers' compensation provisions of Section �� 3790 of the Labor Code, I II comply with s. Dat ,VZ Applicant: WARNING: FAILURE TO SECURE WO 'COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMIN PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,0001. IN ADDITION TO THE COST OF COMPENSATION', DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety fora permit subject to the conditions and restrictions set forth on this application. t. Each person upon whose behalf this application is made; each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that o ' formation is correct. I agree to comply with all city and county ordinances and state laws relating co truction, and hereby authorize representatives of this my o enter upon the above -menti a rty for s Da nature (Appli t nt) Application Number . . . . . 06-00003950 ------ Structure Information SITE LIGHTING 3-PARKING/8-BUILDI14G ----- Other struct info . . . . . CODE EDITION 2001/2005 FIRE SPRINKLERS NO MIXED-USE OCCUPANCY NO Permit BUILDING PERMIT Additional desc Permit Fee . . . . 35.00 Plan Check Fee 22.75 Issue Date Valuation 1500 Expiration Date .5/29/07 Qty Unit Charge Per Extension BASE FEE 15:00 10..00 2.0000 HND BLDG 501-2,000 20.00 Permit . . . ELECT - ADD/ALT/REM - Additional desc . Permit Fee . . . . 23.25 Plan Check Fee 5.81 Issue Date . . . . Valuation 0 Expiration Date 5/29/07 Qty Unit Charge Per Extension BASE FEE 15.00 8.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20 6.00 3.00 .7500 EA ELEC POLE LIGHT 2.25 ---------------------------------------------------------------------------- Special Notes and Comments SITE LIGHTING: 3-HPS PARKING/8-CFL BUILDING. THIS PERMIT IS ONLY.FOR SITE LIGHTING.November 30, 2006 11:26:04 AM AORTEGA. -------------------------------------------------------- -------------- Other Fees STRONG MOTION (SMI) - COM .50 Fee summary Charged Paid Credited Due --------------------------------------------------------- Permit Fee Total. 58.25 .00 .00 58.25 Plan Check.Total 28.56 .00 00 28.56 Other Fee Total .50 .00 .00 .50 Grand Total 87.31 .00 .00 87.31 LQPERMIT ■ /4 _ .off A '$'° Permit #i 3 Project Address: City of La Quinta A (� Building U Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet — 2�Cj~��� (� L� Name: A. P. Number. # Legal Description: Ree'd , Zip: r Contractor: �t'(� fAdd a / ne: % Address:L�(• O 0 Description: City, ST, Zip `/�i�'� 1.. ��©(, b Cj Telephone: %(v Called Contact Person Plan Check Balance State Lic. # : City Lie. #: Arch., iS- Plans picked up Construction Address: City,. ST, Zip: Grading.plan Telephone.- State Lic. #: Construction Type: Occupancy: Project type (circle one): New Add'n Alter 'Repair Demo Name of Contact Person: 1 Sq: FL: #Stories: #Units: 0 Telephone # of Contact Person: O Q Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Plan Sets Req'a . Ree'd TRACKMG .. PERMIT FEES Plan Check submitted Item Amount Structural Calcs. Reviewed,,ready for corrections Plan -Check Deposit Truss Calcs. Called Contact Person Plan Check Balance Energy Calcs. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading.plan V Review, ready for correctio css �) (� Electrical Sabcontactor List Called Contact Person 6 Plumbing Grant Deed Plans picked up B.M.I. I4.O.A. Approval Plans resubmitted.. J.qradin IN HOUSE:- 3a Review, ready for coerectionstissue Developer Impact Fee. ; Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue. 1 tl IN School Fees Total Permit Fees I I �I I u�-�bKUN.c vu�= I I �ZJ �LXo i 1 � (0 U(0 c: vvKrr�<vv(�ui�� C li CL,.)/PLMJ9*6e6M_ 044i� Il C0PV tF L10#r R7t.F I I POLES 4" STRAIGHT SQUARE STEEL POLE SHAFT: The pole shaft is fabricated from a single -piece of 11 ga (.1196') or 7 ga (.1793') commercial carbon steel. The formed steel plate is longitudinally welded providing minimum yield strength of 46 KSI. ANCHOR BASE: The pole anchor base is fabricated from A-36 structural quality carton steel with a minimum yield strength of 36 KSI. The base plate telescopes the pole shaft and is circumferentially welded on both top and bottom. ANCHOR BOLTS: Anchor bolts are fabricated from a commercial quality hot rolled carbon steel bar that meets or exceeds a minimum guaranteed yield strength of 50,000 psi. Bolts have an "If bend on one end and threaded on the opposite end. Anchor bolts are galvanized a minimum of 12' on the threaded and. Four (4) properly sized bolts, each furnished with two (2) regular hex nuts, two (2) flat washers and one (1) lock washer are provided per pole, unless otherwise specified. BASE COVER: A two-piece base cover completely conceals the entire base plate and anchorage. HANDHOLE: The reinforced handhole has a nominal rectangular 2' X 4' inside opening in the pole shaft. Included is a cover plate with attachment screws. The handhole is located 12' above the base and 1800 clockwise with respect to the luminaire arm when viewed from the top of the pole for one arm. For two arms the handhole is located directly under one arm. POLE TOP CAP: Each pole assembly is provided with a removable pole top cap. FINISH: Poles are available with a bronze, natural, white or black electrostatically applied, thermally cured TGIC polyester powdercoat finish. DESIGN: The poles as charted are designed to withstand dead loads and predicted dynamic loads developed by variable wind speeds with an additional 30% gust factor under the following conditions: The wind velocities are based on 10 mph increments from 80 mph through 100 mph. Poles to be located in areas of known abnormal conditions may require special consideration. For example: coastal areas and airports. Poles are designed for ground mounted applications. Poles mounted on structures (such as buildings and bridges) may also necessitate special consideration requiring Gardco/Emco Lighting's recommendation. Height correction factors and drag coefficients are applied to the entire structure. An appropriate safety factor is maintained based on the minimum yield strength of the material incorporated in the pole. WARNING: This design information is intended as a general guideline only. The customer is solely responsible for proper selection of pole, luminaire, accessory and foundation under the given site conditions and intended usage. The addition of any items to the pole, in addition to the luminaire, will dramatically impact the EPA load on that pole. It is strongly recommended that a qualified professional be consulted to analyze the loads given the users specific needs to ensure proper selection of the pole, luminaire, accessories, and foundation. Gardco/Emco Lighting and Genlyte assume no responsibility for such proper analysis or product selections. Failure to insure proper site analysis, pole selection, loads and installation can result in pole failure, leading to serious Injury or property damage. GENERAL INFORMATION: Mounting height is the vertical distance from the base of the lighting pole to the center of the luminaire arm at the point of luminaire attachment. Twin arms as charted are oriented at 1800 with respect to each other. For applications of two (2) arms at 90' or other multiple arm applications, consult the factory. NOTE: Factory supplied template must be used when setting anchor bolts. Gardco Lighting will not honor any claim for incorrect anchorage placement from failure to use factory supplied templates. Cut hole in template 1116' larger than diameter of anchor bolts used. Gardco Ughting/EMCO Lighting reserves the right to change materials or modtfy%the•design.of•i product without notification as part of the companys continuing product improvam program. O Copyright Gardco Lighting 2001-2006. All Rights Reserved. International Copyright Secured. A Genlyte Company 1611 -Clovis Barker Road San Marcos, TX 78666 (800) 227-0758 (512) 753-1000 FAX: (512) 753-7855 www.sitelighfng.com 34' Anchor Botts (4) Top Nuts (4) Lock Washers (4) Flat Washers (8) Grout as required after leveling pole Leveling Nuts (4) Concrete footing to suit soil conditions EMCO LIGHTING 79415-17/1006 Notes: Job: Type: POLES 4" STRAIGHT SQUARE STEEL GENERAL DESCRIPTION: The Gardco/Emco Lighting SSS straight steel pole consists of a one-piece square fabricated steel lighting standard. The carbon steel base plate is secured to the shaft with a continuous circumferential weld providing excellent strength and integrity. The poles are finished with an electrostatically applied, thermally cured TGIC polyester powdercoat. All poles include anchor bolts, full base cover, hand hole, ground lug and top cap. ORDERING PREFIX HEIGHT SIZE GAUGE DRILLING FINISH OPTIONS Enter the order code Into the appropriate box above. Note: Gardoo reserves the right to refuse a configuration. Not all combinations and oonfiguralions are valid. Rater to notes below for exclusions and limitations. For questions or concerns, please consult the factory. CATALOG MAXIMUM NUMBER POLE SIZE LUMINAIRE LOADING' ANCHOR BOLT DATA" POLE ® " e BOLT SSS 10' 20' 4 7 D1 1 Way T2 2 318'X 4" OD Tenon 80 MPH 12' 24' 11 D2 2 Way T4 4" X e" OD Tenon EPA-FT2 14' 25' (Inches) D3 3 Way (Inches) SSS 10 15' 30' 23.9 D4 4 Way 8.0" - 9.0" slot 3/4 x 17 x 3 18' SSS 12 4 11 14.8 18.8 24.4 8.0" - 9.0" slot 3/4 x 17 x 3 Imam SSS 14 PP Prime Painted OC Optional Color Paint FES Festoon outlet Side Mount Bullhorn Brackets BRP Bronze Paint SpecrtyRAL designation asdmr. ex0C4W7p24 AHH Additional Hand Hole • Single Side Mount GM -080 BLP Blade Paint SC Special Color Paint P� Indicate height above base and Bullhorn Bracket °-19"for WP White Paint SpedQt Must suppty odor chip orientation to original hand hole Add 1.9"OD or Refer NP Natural Aluminum Paint 6.7 CL Coulin Internal thread. Coupling - Accessory sheet 9415-26 GV Galvanized (No Paint) SSS 20 Indicate height above base, for details 16.0 8.0" - 9.0" slot 3/4 x 17 x 3 orientation to hand hole and size SSS 25 FPGV Finished Paint over 4.8 (12•, V4", 1', 1 114•, 1 12•) Pieter to Steel Pole Accessories 4.0 Galvanized (specify color) 4 7 5.4 7.7 cutsheet 79416.26 for additional 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 30 Floodlight and Bullhorn Brackets CATALOG MAXIMUM NUMBER POLE SIZE LUMINAIRE LOADING' ANCHOR BOLT DATA" POLE BOLT PREFIX HEIGHT SIZE GAUGE 100 MPH 90 MPH 80 MPH CIRCLE BOLT SIZE MAX PROJ. (FT.) (Inches) EPA-FT2 EPA-FT2 EPA-FT2 (Inches) (Inches) (Inches) SSS 10 4 11 18.9 23.9 30.6 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 12 4 11 14.8 18.8 24.4 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 14 4 11 11.7 15.1 19.9 8.0"-9.0"slot 3/4x17x3 4.0 SSS 15 4 11 8.9 11.8 15.9 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 18 4 11 6.7 9.2 12.6 8.0" - 9.0" slot 3/4x17x3 4.0 SSS 20 4 11 4.5 6.7 9.6 8.0" - 9.0" slot 3/4x17x3 4.0 SSS 20 4 7 8.8 11.8 16.0 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 25 4 11 1.0 2.6 4.8 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 25 4 7 5.4 7.7 10.8 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 SSS 30 4 7 2.6 4.4 6.7 8.0" - 9.0" slot 3/4 x 17 x 3 4.0 `Warning: Additional wind loading, in terms of EPA, from banners, cameras, floodlights and other accessories attached to the pole, must be added to the luminalre(s) EPA before selecting the pole with the appropriate wind load capability. "Factory supplied template must be used when setting anchor bolts. Gardco/Emco Lighting will not honor any claim for Incorrect anchorage placement resulting from failure to use factory supplied templates. Gardco Ughting/EMCO Lighting reserves the right to change materials or modify the design of its 1611 Clovis Barker Road product without notification as part of the company's continuing product improvement program. San Marcos, TX 78666 ® Copyright Gardco Lighting 2071-2006. All Rights Reserved. International Copyright Secured. (800) 227-0758 (512) 753-1000 , . • EMCO A Caenyte Company FAX: (512) 753-7855 LIGHTING LIGHTING www.sitelighting.com 79415-17/1006 I TITLE 24 REPORT I Title 24 Report for: Corp. Centre Professional Plaza -Cody Murphy LLC 79-215 &79-245 Corporate Centre La Q u i nta, CA 92253 Project Designer: Kleine Building & Development 41-910 Boardwalk, # A-10 Palm Desert, CA 92211 (760) 776-4840 Report Prepared By: Tim Scott Scott Design & Title 24 77085 Michigan Dr. Palm Desert, CA 92211 (760) 200-4780 Job Number: Date: 11/8/2006 CITY OF LA QUINTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is orized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. �7 EnergyPro 4.2 by EnergySoft Job Number: User Number: 6712 1 I I TABLE OF CONTENTS I Cover Page 1 Table of Contents 2 Form OLTG-1-C Certificate of Compliance 3 Form OLTG-2-C Lighting Compliance Summary 5 Form OLTG-3-C Illuminated Area Calculation Worksheet 7 I EnergyPro 4.2 by EnergySoft Job Number: User Number: 6712 4 4 CERTIFICATE OF COMPLIANCE (Part 1 of 2) OLTG-1-C OJECT NAME DATE ip'ROJECT Corp. Centre Professional Plaza -Cod Murphy LLC 11/8/2006 ADDRESS 79-215 &79-245 Corporate Centre La Quinta Building Permit # PRINCIPAL DESIGNER - LIGHTING TELEPHONE Kleine Building & Development (760) 776-4840 - DOCUMENTATION AUTHOR TELEPHONE Checked by/Date Scott Design & Title 24 (760) 200-4780 1 Enforcement Agency Use GENERAL INFORMATION DATE OF PLANS OUTDOOR LIGHTING ZONE LZ1 LZ2 ❑X LZ3 LZ4 FUNCTION TYPE OUTDOOR LIGHTING OUTDOOR SIGNS INDOOR SIGNS PHASE OF CONSTRUCTION ® NEW CONSTRUCTION ADDITION ALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the outdoor lighting system specifications need to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements. The documentation preparer hereby certifies that the documentati is accuqate and complete. DOCUMENTATION AUTHOR S N DAT Tim Scott G( Lz The Principal Lighting Designer hereby certifies that the proposed outdoor lighting and signs design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the lighting requirements contained in Sections 110, 119, 130 through 132, and 146,and 149 of Title 24, Part 6. Olease Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) El I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect. I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. I affirm that I am eligible under the exemption to Division a Busin sand Professions Code to sign this document because it pertains to a structure or type of work descri d exemp ursuant to Business and Professions Code Sections 5537, 5538 and 6737.1. PRINCIPAL LIGHTING DESIGNER - NAME IGN E LIC. # Kleine Building & Development LIGHTING COMPLIANCE FORMS & WORKSHEETS Check box if worksheet is included ®OLTG-I-C: Certificate of Compliance. Required on plans for all submittals for outdoor lighting. Part 2 of 2 may be incorporated in schedules on the p Either LTG -1 -C or OLTG-I-C may be used for signs as follows: 1. Use LTG -1-C if the project consists solely of indoor signs. 2. Use LTG -1-C if the project consists of indoor lighting, outdoor or indoor signs, but no other outdoor lighting. 3. Use OLTG-1-C if the project consists solely of outdoor signs. 4. Use OLTG-I-C if the project consists of outdoor lighting, outdoor or indoor signs, but no other indoor lighting. (x OLTG-2-C: LIGHTING COMPLIANCE SUMMARY. Applicable parts required for ALL outdoor lighting allowances (Except Signs). OLTG-3-C: AREA CALCULATIONS WORKSHEET. Applicable parts required for all outdoor area calculations. OLTG-4-C: SIGN LIGHTING COMPLIANCE. Required for all internally and externally illuminated signs, for both indoor and outdoor signs. EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: Page:3 of 8 ans. CERTIFICATE OF COMPLIANCE (Part2 of 2) OLTG-1-C PROJECT NAME Corp. Centre Professional Plaza -Cod Murphy LLC DATE 11/8/2006 i htin Schedules on Plans Show that Outdoor Lightincl Meets Allowed Lightingg LightingPower ❑X Lighting power allowance for general site illumination on OLTG-2-C Part 1 of 4 Not Applicable Lighting power allowance for local ordinances or for security multipliers on OLTG-2-C Part 2 of 4 ❑X Not Applicable FX Lighting power allowances for specific applications, other than vehicle service stations with canopies on OLTG-2-C Part 3 of 4 n Not Applicable Lighting power allowances for vehicle service station canopies on OLTG-2-C part 4 of 4 FX -1 Not Applicable ❑X Sign lighting compliance on OLTG-4-C Not Applicable Mandatory Measures on Plans Show that Outdoor Lightinci Meets Outdoor Liahtinci Controls And E ui ment X] Installed lighting power has been determined in accordance with Section 130(c)1 Not Applicable All permanently installed luminaires with lamps rated 100 Watts either have a lamp efficacy of at least 60 lumins per Watt or are controlled by a motion sensor per Section 132(a) FXJ Not Applicable OAll Luminaires with lamps rated greater than 175 Watts in hardscape area, including parking lots, building entrances, canopies, and all outdoor sales areas meet the Cutoff Requirements of Section 132(b) Not Applicable OAll permanently installed outdoor lighting meets the control requirements of Section 132(c)1 Not Applicable a Building facades, parking lots, garages, canopies, and outdoor sales areas meet the Multi -Level Lighting Requirements of Section 132(c Not Applicable MANDATORY AUTOMATIC CONTROLS NOTE TO FIELD CONTROL LOCATION (Room #) CONTROL IDENTIFICATION CONTROL TYPE (Auto Time Switch, Dimming, etc.) AREA CONTROLLED '7� EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: PageA of 8 LIGHTING COMPLIANCE SUMMARY (Part 1 of 4) OLTG-2-C Name Cora. Centre Professional Plaza - LLC Date 11/8/2006 LIGHTING POWER ALLOWANCES - GENERAL SITE ILLUMINATION - Table 147-A Allotted Watts Luminaire Lamps/Ballasts Installed Watts A B C D E F G H I J K L M I N O Lighting Application 9 Category (Table 147-A) D �'n m R� n x D ?xm Tar o p D c W� c�a v N n m Description m w n d C 0 �a r ori 3 3 d �' m '��° �2 an d v c a 3 iu m cu c 301 o'9 > m' n n 0 c — C c 3.Er 3 m coo y° Z a ,. nUi Building 1 Parking Lot 14,93 0.15 2,240 A 400w High Pressure Sodium X S400 1 400 1.0 469.0 X X 31 1,40 Building 2 Parking Lot 10,98 0.15 1,647 A 400w High Pressure Sodium X S400 1 400 1.0 469.0 X 3 1,40 Total Allotted Watts 3,887 • Total Installed Watts [:;;14 1 EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: Pane:5 of 8 1 4 LIGHTING COMPLIANCE SUMMARY (Part 3 of 4) OLTG-2-C roject Name Date Corr). Centre Professional Plaza-Codv Murr)hv LLC 11/8/2006 LIGHTING POWER ALLOWANCE FOR SPECIFIC APPLICATIONS Table 147-13 - Other than Vehicle Station without Canopies Allotted Watts Luminaire Lam s/Ballasts Desi n Watts A B C D E F G H I J K L M N O P Lighting Application Category (Table 147-B) r D m U3 d 5R a T x D _ �o �xm ,Ha mar o _o m: xa n* iio n c m Description CD yn �o o; o ' �m v3 M y rd c 3 3 �H m.'a 'm * ori d 3ff -0-0 r- IM c w 3 �» d..o r c* 3 m � + Lm -0 m, 0 n v'm_m m —, .. � Z_ c 3.3 E� y > r�N x°'�' z Fo m a D 30 > C f oID a o Building 1 Facade 1,88C 0.35 658 D (1) 42w Compact Fluorescent uadElec 1 42 1.0 46.0 X 1 8 368 36 Building 2 Facade 1,70C 0.35 595 D (1) 42w Compact Fluorescent jrjoLQ 1 42 1.0 46.0 X 7 322 32 • EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: Page:6 of 8 1 ILLUMINATED AREA CALCULATION WORKSHEET (Part 1 of 5) OLTG-3-C ROJECT NAME [DATE Corp. Centre Professional Plaza -Cod Murphy LLC 11/8/2006 ardscaue - Method (i) A. Hardscape for automotive vehicular use, including parking lots, driveways and site roads. A B C D I E I F I G H Lighting Application (Table 147-B) Actual Paved Area + 5, perimeter of adjacent unpaved land. Includes Planters and land. Incudes planters and landscaped areas less than 10' wide that are enclosed by hardscape on at least 3 sides. Areas SF to Subtract from within the Illuminated Area Illuminated Area (B - G) Area between poles or luminaires that are > 6 times thE mounting height distance (If Applicable) Overlapping areas of another application or luminaire Building Areas Areas obstructed by signs or other Structures Sub total of areas to subtract (C + D + E + F) Building 1 Parking Lot 14,932 0 0 0 0 0 14,932 Building 2 Parking Lot 10,980 0 0 0 0 0 10,980 Hardscape for pedestian use, including plazas, sidewalks, walkways and bikeways A B C I D I E I F I G H Lighting Application (Table 147-B) Actual Paved Area + 5- of unpaved land on either side of path of travel. Shall include all contiguous paved area before including adjacent grounds. Areas (SF) to Subtract from within the Illuminated Area Illuminated Area (B - G) Area between poles or luminaires that are > 6 times thE mounting height distance (If Applicable) Overlapping areas of another application or luminaire Building Areas Areas obstructed by signs or other structures Sub total of areas to subtract (C + D + E + F) Checklist ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. Section 147 (c)1 A - General Illumination areas includes only those illuminated areas that are in the bounds of the Application and are within a square pattern around a S% that is six times the luminaire mounting height, with the luminaire in the middle of the patttern, less any areas that are within buildings, under canopies, beyond property lines, or obstructed by signs or other structures. EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: Page:7 of 8 4 14 ILLUMINATED AREA CALCULATION WORKSHEET (Part 3 of 5) OLTG-3-C ROJECT NAME DATE Cora. Centre Professional Plaza-Codv MurDhv LLC 11/8/2006 Outdoor Sales Lot Frontage and Sales Lot Area A B I C I D I E I F G H Gross Illuminated Area (sq. ft.) If an Outdoor Sales Frontage Allotment was used, subtract that area from the Gross Illuminated Area Overlapping Areas of Another Application Sales Lot Area (A - F - G) Mounting height of Sales Frontage Luminaires (feet) 3 x B Distance (In plan view) from the frontagge luminaire fo fron edge of Sales Lot Sales Lot Frontage Length (feet) Sales Frontage Area (C - D) x E (sq. ft.) ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. ❑ Section 147 (c)2 B - Measured in plan view, only illuminated sections of outdoor sales frontage areas that are immediately adjacent to the principle viewing location and unobstructed viewing length, and are within 3 mounting heights of the frontage have been used. Luminaires qualifying for this al;owance are located in plan view between the principle viewing location and the frontage sales. Building Facade Area A B C D E F G H Designated Name and Orientation Length Height Gross Area (B x C) Areas (SF) to Subtract from within the Illuminated Area Net Area Available for Facade Ligghtin (D -G? Areas covered by signs Area for which Illumination is Obstructed by Other Objects and Area Not Illuminated Sub total (E + F) Building 1 Facade 188 10 1,880 0 0 1,880 Building 2 Facade 170 10 1,700 0 0 1,700 Checklist ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. Section 147 (c)2 A - Only facades areas that are illuminated without obstruction or interference, by one or more luminaires, have been used. EnergyPro 4.2 by EnergySoft User Number: 6712 Job Number: Paae:8 of 8 1