The URL can be used to link to this page

13-1122 (SFD)P.O. BOX 1504 78-49,5 CALLE TAMPICO LA QO NTA, CALIFORNIA 92253 Application Number: 13-00001122 Property Address: 53773 VIA BELLAGIO APN: 772-510-055- - - Application description: DWELLING - SINGLE FAMILY Property Zoning: LOW DENSITY RESIDENTIAL Application valuation: 516965 44��VINW /f VOICE (760) 777-7012 FAX (760) 777-7011 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153 DETACHED A _plicant: Architect or Engineer: Lic. No.: OF UNITS ------------------ LICENSED CONTRACTOR'S DECLARATION BUILDING PERMIT I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with . Section 7000) of Division 3 of the Business and Pr s ionals Code, and my License is in full force and effect. License Class: B License No.: 533670 Date: contractor: - OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500)•: (_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_) 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_ ) 1 am exempt under Sec. , BAP.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPERMIT Date: 12/31/13 Owner: TIM BALLARD 40101 MONTEREY AVE. RANCHO MIRAGE, CA 92270 Contractor: D �� SUNROSE CORPORATIO 40101 MONTEREY AVE E B1 p X014 RANCHO MIRAGE, CA 9. 7 SAN (760)773-6633 Lic. No.: 533670 CITY -OF LA9UNTi ----------------------------------------------- WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 1948056-2013 I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject, to the workers' compensation laws of California, and agree that, if I should becom subject to the workers' compensation provisions of Section � ,,/ 3700 of the Labor Code, I shall orthwith comply with those provi Dater 1-►�f / 3' Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating tobuildingconstruct'd hereby authorize representatives of this county to enter upon the above-mentioned property for inspect, purposes. Date! Signature (Applicant or Agent): �� Application Number . . . . . 13-00001122 Permit . . . . . . BUILDING 2013 Additional desc . Permit Fee . . . . 750.95 Plan Check Fee 00 Issue Date . . . . Valuation . . . . 516965 Expiration Date 6/29/14 Qty Unit Charge Per Extension BASE FEE 573..43 317.00 ---------------------------------------------------------------------------- .5600 THOU BLDG $200,001-$1M 177.52 Permit . . . ELECTRICAL 2013 Additional desc . Permit Fee . . . . 216.87 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date 6/29/14 Qty Unit Charge Per Extension 1.00 23.8300 LS ELEC FIXTURES, FIRST 20 23.83 1.00 2.3800 EA ELEC FIXTURES, ADD'L 2.38 1.00 23.8300 -EA ELEC SERVICES 23.83 1.00 23.8300 EA ELEC TEMP POWER POLES 23.83 1.00 ---------------------------------------------------------------------------- 143.0000 LS ELEC NEW RES, FIRST 1 KSF 143.00 Permit . . . •MECHANICAL 2013 Additional desc . Permit Fee . . . . 464.78 Plan Check Fee .00 Date . . . . Valuation . . . . 0 _Issue Expiration Date 6/29/14 Qty Unit Charge Per Extension 5:'00 35.7500 EA MECH FURNACE 178.75 5.00 35.7500 EA MECH CONDENSER/COMP 178.75 8.00 11.9200 EA MECH VENT FAN 95.36 1.00 ---------------- 11.9200 ----------------------------------------------------------- EA - MECH EXHAUST HOOD 11.92 Permit .' . . PLUMBING 2013 Additional desc . Permit Fee . . . . 369.51 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 6/29/14 Qty Unit Charge Per Extension 24.00 11.9200 EA PLBG FIXTURE/TRAP 286.08 1.00 11.9200 EA PLBG BUILDING SEWER 11.92 LQPERMIT Application Number . . . . . 13-00001122 Permit . . . . . . PLUMBING 2013 Qty Unit Charge Per Extension 2.00 11.9200 EA PLBG WATER HEATER/VENT 23.84 1.00 11.9200 LS PLBG GAS SYS, 1-4 OUTLETS 11.92 1.00 35:7500 LS PLBG GAS SYS, 5+ OUTLETS 35.75 -------------------------------------------------------------------=-------- Special Notes and Comments NEW SFD WITH BASEMENT 5841 SQ. FT.- DECK 216 SQ. FT., PATIO 950 SQ. FT. GARAGE 919 SQ. FT. FIRE SPRINKLERS 6760 SQ. FT. THIS PERMIT DOES NOT INCLUDE POOL, SPA,BLOCK WALLS , BQ, & WATER FEATURES AND DRIVEWAY APPROACH. September 27, 2013 1:03:48 PM JJOHNSON. -------------------------------------7-------------------------------------- Other Fees . . . . . . . . . ART IN PUBLIC PLACES -RES 797.37 BLDG STDS ADMIN (SB1473) 21.00 DIF COMMUNITY CENTERS -RES 129.00 DIF CIVIC CENTER - RES 942.00 DIF FIRE PROTECTION -RES 433.00 GRADING PLAN CHECK FEE .00 HOURLY PLAN CHECK 588.00 DIF LIBRARIES - RES 344.00 PLAN CHECK, ELECTRICAL 100.22 DIF PARK MAINT FAC - RES 40.00 PLAN CHECK, MECHANICAL 281.23 PLAN CHECK, SFD GRADING 143.00 PLAN CHECK, PLUMBING 359.96 DIF PARKS/.REC - RES 2048.00 BLDG PC 200K -1M 1540.62 STRONG MOTION (SMI) - RES 51.89 TUMF: RESIDENTIAL 1837.44 DIF STREET MAINT FAC -RES 116.00 DIF TRANSPORTATION - RES 2842.00 Fee summary Charged --------------------------- Paid Credited. ------------------------------ Due Permit Fee Total 1802.11 .00 .00 1802.11 Plan Check Total .00 .00 .00 .00 Other Fee Total 12614.73 1500.00 .00 11114.73 Grand Total' 14416.84 1500.00 .00 12916.84 LQPERMIT Building Address ar3 Owner H P.O. BOX 1504 78-495 CALLE TAMPICO V(lq' 6e_ [_4r7 / lJ LA QUINTA, CALIFORNIA 92253 Mailing GAO �0p_ /— AddressI>/ lO/0�7� 1�' C l-,;2/ City lZip T61. -7aa Contractor r Ity Zip JTel. 1 a-� 0 760 773 LP43 & Classif. rr v I Lic. #n,701 13 I Designer Address�a //�� Tel. 171417 J-1�% ci �✓ %'� �/ 1/-1I eyl-M//,.,10 01V45re.AtilU Cityt_ },k Ufy Zipqq State d /7 Lic. # LICENSED CONTRACTOR'S DECLARATION I hereb ffirm that I am licensed under provisions of Chapter 9 (commencing with Section 7000) pfDivision o the B sines d Professions Code, and my license is in full fo�. r�eff ct. ,_,,4 A ATE OWNER -BUILDER DECLARATION I hereby affirm that I am exempt from the Contractor's License Law for the following reason: (Sec. 7031.5, Business and Professions Code: Any city or county which requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the provisions of the Contrac- tor's License Law, Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, or that he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500). ❑ I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Profes- sions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he did not build or improve for the purpose of sale). ❑ I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractor(s) licensed pursuant to the Contractor's License Law.) ❑ 1 am exempt under Sec. B. & P.C. for this reason WO"'S 'S COMPENSATION DECLARATION I hereby affirm that I have a certificate of consent to self -insure, or a certificate of Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.) Policy No. Company ❑ Copy is filed with the city. ❑ Certified copy is hereby furnished. CERTIFICATE OF EXEMPTION FROM WORKERS' COMPENSATION INSURANCE (This section need not be completed if the permit is for one hundred dollars ($100) valuation or less). I certify that in the performance of the work for which this permit is issued, I shall not employ any pe3y in any manner so ome subj�ers' Co nsation Laws of California. Date Ow /lC NOTI E T APPLICANT.• If, aRe aking this ertificate of Exemption you should ecome subject to the Workers' Comp sation pr ions of the Labor Code, you must rthwith comply with such provisions or this on shall a deemed revoked. CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued. (Sec. 3097, Civil Code.) Lender's Name Lender's Address This is a building permit when properly filled out, signed and validated, and is subject to expiration if work thereunder is suspended for 180 days. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to enter the above-mentioned property for inspection purposes. Signature of applicant Date Mailing Address City, State, Zip WHITE = BUILDING DEPARTMENT /3' 11 zz APPLICATION ONLY BUILDING: TYPE CONST. 151"7291_ OCC. GRP. A.P. Number -7 % % Legal Description Project Description SFt. �i c{ Sto Size New Add ❑ No. Dw. AlterO Repair❑ Demolition 719 i.0 / IEstimated Valuation 1y,, ©C© PERMIT AMOUNT Plan Chk. Dep. , --- Plan Chk. Bal. Const. Mech. Electrical Plumbing S.M.I. Grading Driveway Enc. Infrastructure TOTAL CONTACT INFORMATION NAME: PHONE: ZONE: BY: Minimum Setback Distances: Front Setback from Center Line FINAL DATE Issued by: _ Validated by: Validation: YELLOW = APPLICANT PINK = FINANCE r Coachella Valley Unified School District 83-733 Avenue 55,, Thermal, CA 92274 (7.60) 398-5909 - Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID . AREA: AMOUNT LEVEL ONE AMOUNT: - ' LEVEL TWO AMOUNT: MITIGATION AMOUNT: COMM/IND. AMOUNT: DATE: - RECEIPT: CHECK#: - .INITIALS 'CERTIFICATE OF COMPLIANCE (California Education C6de.17620) Project Name: iHid�ea Date: December 12,.2013 Owner's Name: Tim Ballard Phone No. 760-773-6633 Project Address: 53 -773 -Via Bellagio, LaQuinta Project Description: New SFD APN: 777-170-012 Tract #: Lot #'s Type of Development: Residential XX Commercial p Industrial: Total Square Feet of Building Area: 5841 Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: December 12, 2013 Signature: SCHOOL DISTRICT'S. REQUIREMENTS: FOR THE ABOVE PROJECT HAVE BEEN -OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) . Education Code 17620 Gov. Code Project Agreement Existing Not Subject to Fee 65995 Approval Prior to 1/1/87 Requirement Number of Sq.Ft. $841 Amount per Sq.Ft. $3.20 Amount Collected $18691.20 Building Permit Application Completed: Yes/No By: Elsa F. Esqueda, Director of Facilities and Maintenance No ;; Pursuant to AB 181 any room additions or enclosures of 500 sq. ft. or less are exempt from developer fees. Any mobile homes being relocated within the same school district's jurisdiction are exempt from developer fees. Certificate issued by: Laurie Howard, Secretary Signature : �QCg,1A NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time.of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of: the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. MV:c/nrydocs%devfces/certificat e of compliance fornL updated 3-2007 11/2010 Documents provided by DataTroe LLC via irs proprietary imaging and delivery system. Copyright 20M. All rights reserved. RECORDING REQUESTED BY: Title 365 AND WHEN RECORDED MAIL TO: Discover Investments, LLC 67 Canyon Creek Irvine, CA 92603 Order No.: 510420385050 Escrow No.: FS111 A.P.N.: 777-170-012-4 TRA: 020-160 DOC # 2012-0516336 10/29/2012 11:17 AM Fees: $18.00 Page 1 of 2 Doc T Tax Paid Recorded in Official Records County of Riverside Larry W. Ward Assessor, County Clerk & Recorder "This document was electronically submitted to the County of Riverside for recording" Receipted by: MRUIZ SPACE ABOVE THIS LINE IS FOR RECORDER'S USE GRANT DEED THE UNDERSIGNED GRANTOR(S) DECLARE(S) DOCUMENTARY TRANSFER TAX IS $ 440.00 [ X1 computed on full value of property conveyed, or [ ] computed on full value less value of liens or encumbrances remaining at time of sale. [ ] unincorporated area [ X ] City of La Quinta FOR A VALUABLE CONSIDERATION, receipt of which is hereby acknowledged, Daniel P. Stoner and Judy Y. Stoner, Husband And Wife As Joint Tenants hereby GRANT(S) to Discover Investments, LLC the following described real property in the County of Riverside, State of California See attached Exhibit "A" Dated: October 17, 2012 STATE OF CALIFORNIA COUNTY OF ata a SS. On 7r`' Oc bzr 7-0/-1- before me, K, -•'s o Seb— D/so.-, ,Notary Public onalll ap eared/ /iRhie/ QP'�d S�noer who prcfved to me on the basis of satisfactory evidence to be the person (s) whose name (s) is/are subscribed to the within instrument and acknowledged to me that he/ she/ they executed the same in his/ her/ their authorized capacity (ies), and by his/ her/ their signature (s) on the instrument the person (s), or the entity upon behalf of which the person (s) acted, executed the instrument. I certify under PENALTY OF PERJURY under the KRISTOPHER JOHN OLSON laws of the State of California that the foregoing Commission # 1961438 paragraph is true and correct. " Notary Public - California Orange County WITNESS my hand And official seal. My Comm. Expires Nov 21, 2015 Signature (This area for official notary seal) MAIL TAX STATEMENTS AS DIRECTED ABOVE Documents provided by DataTree LLC via its proprietary imaging and delivery system. Copyright 2003, All rights reserved. DOC # 2012-0516336 Page 2 of 2 19f2'9/2012 11:17 AM EXHIBIT "A" The land referred to in this Report is situated in the County of Riverside, State of California, and is described as follows: PARCEL1: LOT 324 OF AMENDED TRACT NO. 29894-2. IN THE CITY OF LA QUINTA, COUNTY OF RIVERSIDE, STATE OF CALIFORNIA, AS PER MAP RECORDED IN BOOK 327, PAGE(S) 56 THROUGH 88, INCLUSIVE OF MAPS; IN THE OFFICE OF THE COUNTY RECORDER OF SAID COUNTY. EXCEPTING THEREFROM TO GRANTOR, AND ITS SUCCESSORS AND ASSIGNS, INTEREST IN ALL WATER, MINERALS, OIL, GAS, PETROLEUM, OTHER HYDROCARBON SUBSTANCES AND ALL GEOTHERMAL ENERGY SOURCES IN OR UNDER SAID LAND OR WHICH MAY BE PRODUCED FROM SAID LAND. PARCEL 2: NON-EXCLUSIVE EASEMENTS FOR ACCESS, INGRESS, EGRESS; DRAINAGE, MAINTENANCE,' REPAIRS AND FOR OTHER PURPOSES, ALL AS DESCRIBED IN THE DECLARATION. APN: 777-170-0124 f/um1U�r° I //7', .a lrl�f/! Residential Skylight Flat Glass Details (Scale: YY -0") Specifications GAL -CM -1 GAL -CM -1 oo- � Frame Material Aluminum Alumilite Skylight shall be model No. as manufactured by Bristolite Daylighting Systems, Santa Ana, CA. Skylights shall be fully factory assembled consisting of glass (see below) that is sealed by interior and exterior gasketing to a 6063-T5 heliarc welded aluminum frame. The frame is to have an integral condensation channel to carry, moisture to the exterior. The aluminum retaining cap fasteners are to be corrosion resistant. The base frame shall be installed on a 1-112" wide curb furnished by others. Sizes: Model Inside Curb Glass Model Inside Curb Glass Model Inside Curb Glass Number Dimension Type Number Dimension Type Number Dimension Type 1414 -GAL 141/4" x 141/4" _ A� - 1422 -GAL _ _ 141/4" x 221/4" _ _ A 13046 -GAL 301/4" x 461W 1919 -GAL 19"x 19" A 1446 -GAL 141/4" x 461/4" A 3069 -GAL 301/4" x 691/2" B-1 2222 -GAL 221/4" x 22114" A 2230 -GAL 221/4" x 301/4" = r3096 -GAL 301/4" x 96" B -HS 3030 -GAL -.,._301t4" x 301/4" A 2237 -GAL 221/4" x 37" A 3746 -GAL 37" x 461/4" B -AN 3737 -GAL 37" x 37" Ai� 2246 -GAL 221/4" x 461/4" A 3775 GAL 37" x 75" B -HS 4242 -GAL 42" z 42" C 2272 -GAL 221/4" x 72" A 3859 -GAL 38" x 59" B-1 4646 GAL 461/4" x 461/4" C 7222 -GAL 72" x 221/4" A 4848 -GAL 48" x 48" C 2296 -GAL 221/4" x 96" B-1 3037 -GAL 301/4" x 37" A Minimum pitch of 3:12 is required for all flat glass models. Solar Heat Gain Coefficient = .52, U Factor = .47, Visible Light Transmission = 51 %" (Typical for TB glazed units) Features: Glass Type: , 1. Curb Mounted (CM) A: 518" Thick Overall 2. Three Glass Color Choices: Bronze (TB), Grey (TG) or Clear (TC) (1/8" Tempered, 1/4" Air Space, 114" Annealed Lam.) Add highlighted suffixes to model number where applicable: B -AN: 15/16" Thick Overall i.e. 4242-GAL-CM-I-TBILC-BA (1/8" Tempered, 3/8" Air Space, 7/16" Annealed Lam.) B-1: 1" Thick Overall Options: (3/16" Tempered, 318" Air Space, 7116" Annealed Lam.) 1. Frame Finish - Bronze Anodize (BA), Clear Anodize (CA), r B•HS: 1"Thick Overalh---� White Painted Mill Finish 11 GrTY OF i(3116"'Tempered1,3l8?Air�Space, 7/16" Heat Strengthened Lam.) (WP) or (MF) 2. Low EGlass —PPG Solarban 60 (LE) e'JI!-7f►�;G �:C:1;31,16°.-Thick:Ov`erall- of 3. White Laminated Glass (LW) �4 iD (1/4"�Teympe�redy�, 1/2" Air Space, 7116" Heat Strengthened Lam.) FOR CONSTRUCTiON m ��/' DA?401 E. ® 800.8___54.8618, Bristolite�yllghting Systems— Santa na, A 0�/ 714.540.8950 PDS -1009 -GAL 40, harnessing sunlight for energy savings sale�n'soRE.Co 4.540.5415 www.bristolite.com ICC -ES Evaluation Report ESR -3177 Issued May 1, 2013 This report is subject to renewal May 1, 2015. www.icc-es.org 1 (800) 423-6587 1 (562) 699-0543 A Subsidiary of the International Code Council® DIVISION: 08 00 00—OPENINGS Section: 08 62 00—Unit Skylights REPORT HOLDER: BRISTOL FIBERLITE INDUSTRIES, INC., dba BRISTOLITE® DAYLIGHTING SYSTEMS 401 EAST GOETZ AVENUE SANTA ANA, CALIFORNIA 92707 (714)540-8950 www.bristolite.com EVALUATION SUBJECT: BRISTOLITE SKYLIGHTS 1.0 EVALUATION SCOPE Compliance with the following codes: 2009 and 2006 Intemational Building Code®(IBC) 2009 and 2006 Intemational Residential Code® (IRC) Properties evaluated: ■ Structural ■ Air infiltration ■ Water penetration resistance ■ Durability 2.0 USES The Bristolite AL -CM and AL -SF series skylights described in this report are plastic -glazed, nonopenable skylights complying with Sections 2405 and 2610 of the IBC and Section R308.6 of the IRC. 3.0 DESCRIPTION Bristolite skylights are glazed using smooth domes formed from 0.098-, 0.150-, and 0.236 -inch -thick (2.49, 3.81, and 5.99 mm) flat sheets of Class CC2 acrylic plastic described in the approved quality manual. The domes are attached at the factory to a frame with a retainer cap, both of which are 6063 T5 aluminum extrusions. Model AL -CM skylights are curb -mounted, and Model AL -SF skylights are self - flashing. Details for the skylights are noted in Table 1. 4.0 DESIGN AND INSTALLATION than, the maximum loads determined in accordance with IBC Section 2405.5.2, except the design wind forces must be as specified for skylights in IRC Section R301.2.1. See Table 1 for allowable positive and negative PG rating values. 4.1.2 Air Infiltration: The air leakage of the skylights, tested at an air pressure differential of 1.57 psf (75 Pa) complies with the maximum air leakage rate of 0.3 cfm/ft, (1.5 Us -m2) as required in Sections 402.4.4 and 502.4.1 of the 2009 International Energy Conservation Code® (IECC) (Sections 402.4.2 and 502.4.1 of the 2006 IECC). 4.2 Installation: The curb -mounted skylights must be installed on framing of minimum 2 -by -6 lumber with a minimum 0.50 specific gravity, sized to the inside dimension noted in Table 1, and of a height sufficient so that the plastic glazing is a minimum of 4 inches (102 mm) above the plane of the roof. The wood curb and its attachment to the roof structure must be designed to resist wind uplift and gravity loads. The self -flashing units are designed to mount directly to the roof deck assembly and are limited to a minimum slope of 3:12 in Occupancy Category R-3 per IBC Section 2405.4. The curbs and/or the roof deck must have a square and level mounting surface. A 1/2 -inch -diameter (12.7 mm) bead of butyl sealant, silicone sealant, or an equivalent must be applied to the top surface of the curb or deck before the skylight is set in place. The skylight must be attached with No. 8 corrosion - resistant wood screws in each mounting hole provided in the skylight frame, with the screw length being sufficient to penetrate the wood curb or roof framing member a minimum of 11/2 inches (38 mm). See Table 2 for the required number of fasteners. A sealant must be applied over the mounting flange of self -flashing skylight units and must be covered with the roof covering in such a manner as to ensure a watertight seal. A self -adhering roof underlayment, recognized in a current ICC -ES evaluation report as complying with the ICC -ES Acceptance Criteria for Roof Underlayment of Use in Severe Climate Areas (AC48), must then be applied on the roof sheathing around the entire skylight frame, and must continue up to cover the sides of the skylight frame. The underlayment must be lapped at the corners of the -skylight frame. 4.1 Design: -�-�/ Carb�rrrmou�ntted skylights must have the gap between the 4.1.1 General: The allowable loads are expressed ;as , skylight frame and the�w�oaod`curNb fully shimmed. Flashing performance grade rating values, PG. Under the IBC, the"ILC�mustAcomply"�with�and-be installed in accordance with, IBC PG' rating values must be equal to, or greater thari, the Section -1-507 or IRC, Section R905 as applicable. maximum loads required by IBC Section 2405.5.2. Under FOk.� Additfor�Ifi�U�a�ioU1dvetails are provided in Figures 1 the IRC, the PG rating values must be equal to, or greater through 0. DATE BY ICC -ES Evaluation Reports are not to be construed as representing aesthetics or an of er attn Utes not specs scally addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this report, or as to any product covered by the report. i Copyright O 2013 Page 1 of 4 ESR -3177 I Most Widely Accepted and Trusted Page 2 of 4 5.0 CONDITIONS OF USE The Bristolite AL -CM and AL -SF Skylights described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 The skylights must be installed in accordance with this report, Sections 2405.4 and 2610 of the IBC or Section R308.6 of the IRC, as applicable, and the manufacturer's published installation instructions. In the event of a conflict between this report and the manufacturer's published installation instructions, this report governs. 5.2 The allowable loads (performance grades) for the skylights are as set forth in Table 1 and must be equal to, or greater than, the applied loads specified by the applicable code. Snow loads are outside the scope of this report 5.3 The skylights are manufactured in Santa Ana, California, under a quality control program with inspections by UL LLC (AA -668). 6.0 EVIDENCE SUBMITTED Data in accordance with the ICC -ES Acceptance Criteria for Plastic -glazed Skylights (AC16), dated April 2011. 7.0 IDENTIFICATION The skylights are labeled with the Bristolite Skylights name and address; the product model number and performance grade ratings noted in Table 1 of this report; the evaluation report number (ESR -3177); a safety label complying with Class I, ANSI Z 35.1-1972 (warning of risk of falling); and the name of the inspection agency (UL LLC). TABLE 1 -DIMENSIONAL DETAILS AND PERFORMANCE GRADES FOR BRISTOLITE SKYLIGHTS MODEL NO. INSIDE CURB DIMENSIONS (inches) DOME THICKNESS (inch) DOME RISE (inches) PERFORMANCE GRADE, PG, AND ALLOWABLE LOADS (psf), AL -CM SERIES PGP„ PG„, (inward (outward forces) forces) PERFORMANCE GRADE, PG, AND ALLOWABLE LOADS (psf), AL -SF SERIES PGP„ PG„., (inward (outward forces forces 1422 14.25 x 22.25 0.098 4 30 80 30 80 1414 14.25 x 14.25 0.098 4 30 80 30 80 2246 22.25 x 46.25 0.098 5 15 40 15 30 2237 22.25 x 37 0.098 5 15 40 15 30 2230 22.25 x 30.25 0.098 5 15 40 15 30 3046 30.25 x 46.25 0.098 6 15 60 15 55 3037 30.25 x 37 0.098 6 15 60 15 55 4242 42 x 42 0.098 8 15 40 15 40 3737 37 x 37 0.098 6 15 40 15 40 3030 30.25 x 30.25 0.098 6 15 40 15 40 2222 22.25 x 22.25 0.098 5 15 40 15 40 1919 19X 19 0.098 5 15 1 40 15 40 4896 48 x 96 0.150 12 15 15 15 20 4848 48 x 48 0.150 11 15 15 15 20 4689 46.25 x 89.50 0.150 11 15 15 15 20 4669 46.25 x 69.50 0.150 11 15 15 15 20 4646 46.25 x 46.25 0.150 10 15 15 15 20 3859 38 x 59 0.150 9 15 15 15 20 3775 37 x 75 0.150 9 15 15 15 20 3746 37 x 46.25 0.150 9 15 15 15 20 3069 30.25 x 69.50 0.150 7 15 15 15 20 6096' 60 x 96 0.236 15 15 15 15 20 6072 60 x 72 0.236 15 15 15 15 _ 20 5555 55 x 55 0.236 12 '--1"5 _ 1,5 ,� a p 1115,-r A M 20 5460 54 x 60 0.236 1 13 .15. y J i' 1�5 v 1"1 r 20 For SI: 1 inch = 25.4 mm, 1 psf = 0.0479 kN/mZ. & SAFE - y ILLI•' I . ��r-NIS Model No. 6096 is considered a large size skylight which must be installed in accordance with Figure;2', VUR CON-STRUCTION bK BY ESR -3177 I Most Widely Accepted and Trusted Page 3 of 4 TABLE 2—REQUIRED FASTENERS FOR BRISTOLITE SKYLIGHTS MODEL NO. AL -CM Number of Retainer Fasteners' SERIES Number of Skylight Mountingz Fasteners AL -SF Number of Retainer Fasteners' SERIES Number of Skylight Mounting Z Fasteners 1422 10 12 10 10 1414 8 12 8 8 2246 14 16 14 16 2237 12 14 12 14 2230 12 12 12 12 3046 20 10 20 10 3037 14 8 14 8 4242 16 12 16 12 3737 16 12 16 12 3030 12 8 12 8 2222 10 10 10 10 1919 10 10 10 10 4896 24 .18 24 18 4848 16 12 16 12 4689 22 16 22 16 4669 20 14 20 14 4646 16 12 16 12 3859 14 14 14 14 - 3775 18 12 18 12 3746 14 12 14 12 3069 18 16 18 16 6096 24 14 24 14 6072 1 20 1 16 20 16 5555 20 16 20 16 5460 22 14 22 14 'Aluminum frame to aluminum retainer fasteners are No. 8, TEKS, galvanized steel screws 2Metal flange to wood curb (shear) fasteners to attach skylights to wood curbs with specific gravity of 0.50, are No. 6d common nails having sufficient length to penetrate the wood curb a minimum of 11/2 inches. Metal flange to wood deck (withdrawal) fasteners to attach skylights to decks with specific gravity of 0.50, are No.16d common nails having sufficient length to penetrate the wood framing a minimum of 3 inches. CITY OF LA QUINTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION BATE BY ESR -3177 I Most Widely Accepted and Trusted Page 4 of 4 c ALUY=M PERWETER CAP SEALANT AS REO'0 (BY OTHERS) CONDE14UTE NEEP HOLES FASTERM (BY ATHERS) Imm CURS ROOF04 iF OWENS10N5 (BY OTH£Rs) (SEETABLEI) FIGURE 1—AL-CM CURB MOUNT SKYLIGHT ALU1lLWM PERWOER CAP SEALAW AS REO.O (ax OTHERS) CONDEWATE NEEP HOLES FASTENERS (BY OTHERS) ALUAANU'N L2'x2's,121 RO .vc (mumm CONDENSATE PROVISION GAUET CONDENSATE V64EEP HOLES FASTG1tERS (BY OTHERS) lxgDE CURB OLAtENSONS (SEE TABLE 1) FIGURE 2 -AL -CM CURB MOUNT SKYLIGHT (LARGE SIZES) ROUGH OPENINC DIMENSIONS (SEE TABLE 11 FIGURE 3-ALUMILITE SELF -I c► olF BUI DOME ATE ALUMINUM CURB FRAME 1 1/2' NIDE N000 CURB (BY OTwRS) FI/SHaNG FRANCE UUME CONDENSATE PROVISOH ALUMMUM CURB FRAME 1 1/2' WIDE W000 CURB (BY OTHERS) PL1SIONG uwlgcE ACRYLIC DOME I ALUWNUM ROAMER CAP ALUm2wv SELF-FLASai.HC FRAME w 2 3/4 - NAILING E I [)EP SH NG SKYLIGHT 0 ATE j�Y •�,f Is ,arid" BUILDING ENERGY ANALYSIS REPORT PROJECT: Ballard Residence , 53-770 Via Bellago, Hideaway La Quinta, Ca 92253 Project Designer: Pekarek Crandell Architecture 31-411 Camino Capistrano, Suite 300 San .Juan Capistrano, CA 92675 (949) 487-2320 Report Prepared by: Tim Scott Scott Design and Title 24, Inc, 77-085 Michigan Drive Palm Desert, Ca 92211 (760) 20024780 Job Number: Date: 10/22/2013 CITY OF LA QUINTA BUILDING & SAFETY DEPT. The EnergyPro computer program has been used to perform the calculations summarized in this com lance re his s� ppr I and is authorized by the California Energy Commission for use with both the Residential and Nonresidentp 2008 pi dig Energ�i�iel�cSt nards. 6R CONSTR CTION This program developed by EnergySoft, LLC — www.energysof. com. Ener Pro 5.1 by Ener Soft User Number. 6712 RunCode: 2013-10-22T15:04:57 I : ATE PV TABLE OF CONTENTS Cover Page 1 Table of Contents ' 2 Form CF -1 R Certificate of Compliance 3.- - Form- MF -1 R Form -MF -1R Mandatory Measures Summary. 13 HVAC System Heating and Cooling Loads Summary 16 Room Load Summary 20 . Room Heating Peak Loads 24 Room Cooling Peak Loads 30 . - CITY OFLA QUANT BUILDING & SAFETY DEPT APPROVED FOR CONSTRUCTION i DATE ---_ C3Y EnergyPro 5.1 by EnergySoft Job Number: ID: User Number: 6712 PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name Ballard Residence Building Type 0 Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 11012212013 Project Address 53-770 Via Bellago, Hideaway La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 5,841 Addition n/a # of Stories 2 FIELD INSPECTION ENERGY CHECKLIST El Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity (ft) Features see Part 2 of 5 Status Roof Wood Framed Attic R-38 4,213 Radiant Barrier New Wall Wood Framed R-21 4,738 New Slab Unheated Slab -on -Grade None 5,129 Perim = 558' New Door Opaque Door None 24 New Wall Solid Unit Masonry None 1,404 int --R-13.0 New FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidef ins Shades Status Skylight 9.0 0.800 0.39 none none None New: Skylight 9.0 0.800 0.39 none none None New Front (NE) 97.0 0.350 0.30 none none Bug Screen New Rear (SW) 325.0 0.530 0.30 none none Bug Screen New Rear (SW) 242.5 0.350 0.30 none none Bug Screen New Right (NW) 145.0 0.350 0.30 none none Bug Screen New Right (NW) 45.9 0.530 0.30 none none Bug Screen New Left (SE) 334.9 0.350 0.30 none none Bug Screen New Front (NE) 32.0 1.040 0.38 none none Bug Screen New Front (NE) 108.0 0.530 0.30 none none Bug Screen New Left (SE) 27.5 0.350 0.30 22.0 none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 80% AFUE Split Air Conditioner 16.5 SEER Setback New 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New 2 Central Furnace 80% AFUE Split Air Conditioner 16.5 SEER Setback New HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status HVAC 1 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New HVAC 2 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New HVAC 3 & 4 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New _ WATER HEATING Qty. Type Gallons Min. Eff Distribution �CITY OF LA QUINTA 2 Large Gas 75 0.80 All Pipes Ins . RV En ergyPro 5.1 by Ener Soft User Number. 6712 RunCode: 2013-10-22715:04:57 ID: ___`Pa .e_3_of 38 'r- PERFORMANCE CERTIFICATE: Residential Part 1 of 5 PERFORMANCE CF-1 R Project Name Ballard Residence Building Type © Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 10/22/2013 Project Address 53-770 Via Bellago, Hideaway La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor77n/a 5,841 ddition # of Stories 1 2 FIELD INSPECTION ENERGY CHECKLIST El Yes ❑ No HERS Measures -- If Yes, A CF-4R must be provided per Part 2 of 5 of this form. El Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Area Special Construction Type Cavity (ft) Features see Part 2 of 5 Status . FENESTRATION U- Exterior Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status Left (SE) 4.5 0.350 0.30 18.0 none Bug Screen New Left (SE) 2.3 0.350 0.30 14.0 none Bug Screen New HVAC SYSTEMS Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New HVAC DISTRIBUTION Duct Location Heating Cooling Duct Location R-Value Status HVAC 5 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New �''+ A' A /1. A A A �. A �-—171 WATER HEATING o,,r r r vr" If_f'i QACLiV V r /-% I BUILDING & SAFET' nFPT Ot . Type Gallons Min. Eff Distributiop _ ,. , Status N i-X r- r- rl yVC:y r-OR �.viV:� Y ntJ"A✓ M YIJYV UH IIC CS EnergyPro 5.1 by Ene rgySoft User Number: 6712 RunCode: 2013-10-22715:04:57 ID: Page 4 of 38 PERFORMANCE CERTIFICATE: Residential (Part 2 of 5) CF-1 R Project Name Building Type ® Single Family ❑ Addition Alone Date Ballard Residence 1 ❑ Multi Family ❑ Existing+ Addition/Alteration 11012212013 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. The DHW System Bradford White #M-1-75S6BN is a non-NAECA large storage gas water heater. Verify DHW details. The HVAC System HVAC 1 must serve only Sleeping Areas. The non-closable area between zones cannot exceed 40 sf and each zone must have a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA3.3 must be met. HIGH MASS Design -Verily Thermal Mass: 927.0 ft2 Covered Slab Floor, 3.500" thick at Master Bedroom HIGH MASS Design - Verify Thermal Mass: 448.0 ft2 Exposed Slab Floor, 3.500" thick at Master Bedroom The HVAC System HVAC 2 must serve only Living Areas. The non-closable area between zones cannot exceed 40 sf and each zone must have a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA3.3 must be met. HIGH MASS Design - Verify Thermal Mass: 401.0 ft2 Covered Slab Floor, 3.500" thick at Casita HIGH MASS Design - Verify Thermal Mass: 60.0 ft2 Exposed Slab Floor, 3.500" thick at Casita The HVAC System HVAC 3 & 4 must serve only Living Areas. The non-closable area between zones cannot exceed 40 sf and each zone must have a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA3.3 must be met. HIGH MASS Design - Verify Thermal Mass: 246.0 ft2 Covered Slab Floor, 3.500" thick at GreaUKitchen/Dining/Media HIGH MASS Design - Verify Thermal Mass: 1,691.0 ft2 Exposed Slab Floor, 3.500" thick at Great/Kitchen/Dining/Media HIGH MASS Design - Verify Thermal Mass: 262.0 ft2 Covered Slab Floor, 3.500" thick at Bedroom 2 HIGH MASS Design - Verify Thermal Mass: 95.0 ft2 Exposed Slab Floor, 3.500" thick at Bedroom 2 The HVAC System HVAC 5 must serve only Living Areas. The non-closable area between zones cannot exceed 40 sf and each zone must have a separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA3.3 must be met. HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF-413 form for each of the measures listed below for final to be given. The Cooling System Carrier 24APA760/58PH'110 includes credit for a 13.0 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System HVAC 1 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System HVAC 1 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. The Cooling System Carrier 24APA524158CVX070 includes credit for a 13.0 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System HVAC 2 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System HVAC 2 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specked criteria. The Cooling System Carrier 24APA760/58PH'110 includes credit for a 13.0 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System HVAC 3 & 4 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display. The HVAC System HVAC 3 & 4 incorporates HERS verified Duct Leakage. HERS field verification and diagnostic testing is required to verify that duct leakage meets the specified criteria. The Cooling System Carrier 24APA524158CVX070 includes credit for a 13.0 EER Condenser. A certified°HER&rater must field verifythelinstallation � i I i V !�c.V of the correct Condenser. l The HVAC System HVAC 5 incorporates HERS Verified Refrigerant Charge or a Charge Indicator Display.0 i L-01 i v u ti. 0T I- C-1 7 I J t= r— I M A piDQnx/man, The HVAC System HVAC 5 incorporates HERS verified Duct Leakage. HERS field verification and d � gnosticlesting,i's required1o.'verify th ' uct FOR i��JIJJ I HUG 1 IVIV leakage meets the specified criteria. r)ATF RV Ener Pro 5.1 by Ener Soft User Number., 6712 RunCode: 2013-10-22T15:04:57 e 5 0f-38 PERFORMANCE CERTIFICATE: Residential Part 2 of 5) CF -1 R Project Name Ballard Residence Building Type ® Single Family ❑ Addition Alone ClT Multi Family ❑ Existing+ Addition/Alteration Date 10/22/2013 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. HIGH MASS Design - Verify Thermal Mass: 999.0 ft' Exposed Slab Floor, 3.500" thick at Basement The Roof R-38 Roof(R.38.2x12.16) includes credit for a Radiant Barrier that is Continuous meeting eligibility and installation criteria as speed in Residential Appendix RA4.2.2. HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF -4R form for each of the measures listed below for final to be given. N CITY OP LA QUINTA BUILDING & SAFETY DEPT. I FOR CONSTRUCTION nnTr A Ener Pro 5.1 by Ener Soft Use, Number: 6712 RunCode: 2013-10-22715:04:57 I ID: _ Pa e 6 ot~38 X PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF -1 R Project Name Building Type 2 Single Family ❑ Addition Alone Date Ballard Residence 1 ❑ Multi Family ❑ Existing+ Addition/Alteration 1101221201 ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/ft2- r Space Heating 5.11 4.85 0.26 Space Cooling 56.61 48.37 8.24 Fans 11.29 15.18 -3.88 Domestic Hot Water 5.88 3.87 2.01 Pumps 0.00 0.00 0.00 Totals 78.90 72.26 6.63 Percent Better Than Standard: 8.4% BUILDING COMPLIES - HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (NE) 65 deg Ext. Walls/Roof Wall Area Area Number of Dwelling Units: 1.00 (NE) 1,677 237 Fuel Available at Site: Natural Gas (SE) 2,128 369 Raised Floor Area: 0 (SK9 1,925 568 Slab on Grade Area: 5129 (N►M 1,801 191 Average Ceiling Height: 11.1 Roof 4,231 18 Fenestration Average U -Factor: 0.43 TOTAL: 1,383 Average SHGC: 0.30 Fenestration/CFA Ratio: 23.7 REMARKS Lot180-The Hideaway STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 the Administrative. Regulations and Part,6 the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and complete. Documentation Author Company Scott Design and Title 24, Inc, 1012212013 Address 77-085 Michigan Drive Name Tim Scott City/St e/ZiPalm Desert, Ca 92211 Phone (760) 200-4780 Signed Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application, and recognizes that compliance using duct design, duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. CITY OF LA QUANTA Designer or Owner (per Business & Professions Code) BUILDiNG & SAFETY DEPT. Company Pekarek Crandell Architecture APPROVED Address 31-411 Camino Capistrano, Suite 300 Name Ron Benier _ ___ i 1-1 vv,Nn try y i 10IV City/State/zip San Juan Capistrano, CA 92675 Phone (949) 487-2320 Signed License # Date DATE BY Ener Pro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22715:04:57`11`' Page-7-of4 3 _r CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5) CF -1 R Project Name Ballard Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/22/2 913 OPAQUE SURFACE DETAILS " Surface Type Area U- InsulationJoint Appendix Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Roof 1,3571 0.026 R-38 1 270 0 New 4.2.1-A9 Master Bedroom Wall 318 0.069 R-21 65 90 1 New 4.3.1-A6 Master Bedroom Wall 149 0.069 1 R-21 155 90 New 14.3.1-A6 Master Bedroom Wall 318 0.069 R-21 245 90 New 4.3.1-A6 Master Bedroom Wall 446 0.069 R-21 335 90 New 4.3.1-A6 Master Bedroom Slab 927 0.730 None 0 180 New 4.4.7-A1 Master Bedroom Slab 448 0.730 None 0 180 New 4.4.7-A 1 Master Bedroom Wall 183 0.069 R-21 65 90 New 4.3.1-A6 Casita - Wall 125 0.069 R-21 155 90 New 4.3.1-A6 Casita Wall 173 0.069 R-21 245 90 New 4.3.1-A6 Casita Slab 401 0.730 None 0 180 New 4.4.7-A1 Casita Slab 60 0.730 None 0 180 New 4.4.7-A1 Casita Roof' 026 R-38 270 0 New, 4.2.1-A9 Livin Zone Wall 069 R-21 65 90 New 4.3.1-A6 Livin Zone Door L599 500 None 65 90 New 4.5.1-A4 LivingZone Wall 069 R-21 14.3.1-A6 ILivin Zone FENESTRATION SURFACE DETAILS ID Type Area LI -Factor'. SHGC Azm Status Glazing Type Location/Comments 1 Skylight 9.0 0.800 NFRC 0.39 NFRC 270 New Skylight Master Bedroom 2 Skylight 9.0 0.800 NFRC 0.39 NFRC 270 New Skylight Master Bedroom 3 Window 10.0 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted Master Bedroom 4 Window 4.0 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted Master Bedroom 5 lWindow 60.0 0.530 NFRC 0.30 NFRC 245 New Double Mtl Tinted Master Bedroom 6 Window 4.51 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Master Bedroom . 7 Window 48.0 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Master Bedroom 8 Window 4.5 0.350 NFRC_ 0.30 NFRC 245 New Dual non Metal Tinted Master Bedroom 9 Window 10.0 0.350 NFRC 0.30. NFRC 245 New Dual non Metal Tinted Master Bedroom 10 Window 16.5 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted Master Bedroom 11 Window 4.5 0.350 NFRC. 0.30 NFRC 335 New Dual non Metal Tinted Master Bedroom 12 Window 24.01 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted Master Bedroom 13 Window 45.9 0.530 NFRC. 0.30 NFRC 335 New Double Mtl Tinted Master Bedroom 14 Window 24.0 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted Master Bedroom 15 Window 10.0 0.350 NFRC 0.30 NFRC 335,New Dual non Metal Tinted Master Bedroom .16 Window 4.5 0.350 1 NFRC 0.30 NFRC 1 651 New Dual non Metal Tinted I Casita (1) U -Factor Type: 116-A = Default Table from Standards, NFRC =Labeled Value. 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value _ EXTERIOR SHADING DETAILS ID " - Window Exterior Shade Type SHGC H t Wd Overhang Left Fin Len H t LExt RExt Dist Len Right Fin H t Dist Len H t 1 None 1.00 2 None 1.00 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 . 9 Bug Screen 0.76 10 11 Bug Screen Bug Screen 0.76 0.76 ----` �r`AT!! l�s� 1 A nil 1110TH 12 13 Bug Screen Bug Screen 0.76 0.76 kitJILi191�1a t� �hit'IG Y L,C� . 14 Bug Screen 0.76 mobr,)Uffri -15 16 Bug Screen Bug Screen 0.76 0.76 .. r . �/�•rif .Al rL t -S l.v VJ i r vv TF BY Ene Pro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22T15:04:57 Ipa e4of-38. CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF-1 R Project Name Ballard Residence Building Type la Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 02212013 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Factor Cavity Exterior Frame Interiorl Frame I Azm Joint Appendix Tilt I Status 4 Location/Comments Wall 262 0.069 R-21 245 90 1 New 4.3.1-A6 Living Zone Wall 234 0.069 R-21 335 90 New 4.3.1-A6 Living Zone Slab 246 0.730 None 0 180 New 4.4.7-A1 Living Zone Slab 1,6911 0.730 None 0 180 New 4.4.7-A1 Living Zone Roof 2071 0.026 R-38 270 0 New 4.2.1-A9 Bedroom 2 Wall 187 0.069 R-21 155 90 New 4.3.1-A6 Bedroom 2 Wall 178 0.069 R-21 245 90 New 4.3.1-A6 Bedroom 2 Wall 93 0.069 R-21 335 90 New 4.3.1-A6 Bedroom 2 Slab 262 0.730 None 0 180 New 4.4.7-A1 Bedroom 2 Slab 95 0.730 None 0 180 New 4.4.7-A1 Bedroom 2 Roof 719 0.026 R-38 270 0 New 4.2.1-A9 2nd Floor Wall 210 0.069 R-21 65 90 New 4.3.1-A6 2nd Floor Wall 346 0.069 R-21 155 90 New 4.3.1-A6 2nd Floor Wall 127 0.069 R-21 245 90 New 4.3.1-A6 12nd Floor Wall 388 0.069 R-21 335 90 New 4.3.1-A6 2nd Floor Wall 300 0.068 None 13.0 None 65 90 New 4.3.6-F2 Basement FENESTRATION SURFACE DETAILS T Ue Area -Factor SHGC Azm Status Glazin T e Location/Comments Window 12.5 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted Casita P19 Window 27.5 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Casita Window 48.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Casita Window 10.0 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Casita 21 lWindow 4.5 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Casita 22 Window 12.5 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Casita 23 Window 32.0 1.040 NFRC 0.38 NFRC 65 New Custom Door Living Zone 24 Window 4.5 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted Living Zone 25 Window 108.0 0.530 1 NFRC 0.30 NFRC 65 New Double Mtl Tinted Living Zone 26 Window 48.0 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted Living Zone 27 Window 27.5 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 28 Window 4.5 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 29 Window 2.3 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 30 Window 2.3 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 31 Window 2.3 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 32 Window lot'NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone (1) U-Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-13 = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Overhang Left Fin Right Fin Len H t LExt RExt Dist Len Hat Dist Len H t 17 Bug Screen 0.76 18 Bug Screen 0.76 . 19 Bug Screen 0.76 20 JBug Screen 0.76 21 Bug Screen 0.76 22 Bug Screen 0.76 23 Bug Screen 0.76 24 Bug Screen 0.76 25 Bug Screen 0.76 26 Bug Screen 0.76 27 Bu Screen 0.76 10.0 18.0 22.0 0.1 22.0 22.0' �_ IN A M 28 Bug Screen 0.76 6.5 4.7 18.0 0.1 18.0 18.0 r„ ,,, r, kir- CIA Cr �ui r1r, =_IDT M `VY ve 29 30 Bug Screen Bug Screen 0.76 0.761A 10.0 9.0 14.0 0.1 14.0 14.0 N Y V Va ryv N I -J` �` a i t7- 31 Bug Screen 0.76 [ r f` %zn1 I(:TI IJ 32 Bug Screen 0.76 M DATE BY- EnergyPro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22715:04:57 D: Pa e 9 oF38' CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name Ballard Residence Building Type la Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 0/22/201 OPAQUE SURFACE DETAILS Surface Type Area U- Factor Insulation Joint Appendix Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Wall 354 0.068 None 13.0 None 155 90 New 4.3.6-F2 Basement Wall 300 0.068 None 13.0 None 245 90 New 4.3.6-F2 Basement Wall 450 0.068 None 13.0 None 335 90 New 4.3.6-F2 Basement Slab 999 0.730 None 0 180 New 4.4.7-A1 Basement FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGC Azm Status Glazing Type Location/Comments 33 Window 18.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 34 Window 18.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 35 Window 40.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Living Zone 36 Window 265.0 0.530 NFRC 0.30 NFRC 245 New Double Mtl Tinted Living Zone 37 Window 16.5 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted Living Zone 38 Window 10.01 0.350 NFRC 1 0.30 NFRC 335 New Dual non Metal Tinted Living Zone 39 Window 4.5 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Bedroom 2 40 Window 13.8 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Bedroom 2 41 Window 4.5 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Bedroom 2 42 Window 48.0 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted Bedroom 2 43 Window 27.5 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted Bedroom 2 44 1 Window 4.5 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted 2nd Floor 45 Window 4.5 0.350 NFRC 0.30 NFRC 65 New Dual non Metal Tinted 2nd Floor 46 Window 4.5 0.350 NFRC 0.30 1 NFRC 65 New Dual non Metal Tinted 2nd Floor 47 Window 25.0 0.350 NFRC 0.30 NFRC 155 11New Dual non Metal Tinted 12nd Floor 48 Window 1 4.5 0.350 NFRC 0.30 NFRC 1551 New I Dual non Metal Tinted 12nd Floor (1) Ll -Factor Type: 2 SHGC Type: 116-A = Default Table from Standards, NFRC = Labeled Value 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Overhang Left Fin Right Fin Len I Hot LExt I RExt Dist Len H t Dist Len H t 33 Bug Screen 0.76 34 Bug Screen 0.76 35 Bug Screen 0.76 36 Bug Screen 0.76 37 Bug Screen 0.76 38 Bug Screen 0.76 39 Bug Screen 0.76 40 Bug Screen 0.76 41 Bug Screen 0.76 42 Bug Screen 0.76 Bu Screen 0.76 �T. r �..- n -AIRn v r Bug Screen 0.76 t t 1�f L rA ! v ii*AiirkBu r46 Screen 0.76 B &JILQ1I JU :;AE -171 Y UE- -T. I Bu Screen 0.76 n itBug Screen 0.761 r 1 `J V L-- L-.# 48 lBug Screen 0.761 1 FUH UUIJq I hiU 1 IUN M EnergyPro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22715:04:57 ID: Pae 10 of 38 CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF-1 R Project Name Ballard Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 012212013 OPAQUE SURFACE DETAILS Surface U- Type Area Factor Insulation Joint Appendix Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments FENESTRATION SURFACE DETAILS ID Type Area U-Factor SHGC2 Azm Status Glazing Type Location/Comments 49 Window 25.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted 2nd Floor 50 Window 96.0 0.350 NFRC 0.30 NFRC 245 New Dual non Metal Tinted 2nd Floor 51 Window 4.0 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted 2nd Floor 52 Window 4.0 0.350 NFRC 0.30 NFRC 3351 New Dual non Metal Tinted 2nd Floor 53 lWindow 4.0 0.350 NFRC 0.30 NFRC 335 New Dual non Metal Tinted 2nd Floor 54 Window 96.0 0.350 NFRC 0.30 NFRC 155 New Dual non Metal Tinted Basement (1) U-Factor Type: 2 SHGC Type: 116-A = Default Table from Standards, NFRC = Labeled Value 116-13 = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type Window SHGC Hat Wd Overhanq Left Fin Ri ht Fin Len I Hat LExt REA Dist Len Hat Dist Len H t 49 Bug Screen 0.76 50 Bug Screen 0.76 51 Bug Screen 0.76 52 lBug Screen 0.76 53 Bug Screen 0.76 54 Bug Screen 0.76 fir1 R N M r. r-s r l7-N r�% r R— A_.'k I N I Y �.1 V !_ L y .. r� r✓V 145 I f' UG I I(1)N DATF PV Ener Pro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22T15:04:57 loz-- Pae 11 of 38 CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5) CF-1 R Project Name Ballard Residence Building Type 0 Single Family ❑ Addition Alone ❑ Multi Family ❑ Existing+ Addition/Alteration Date 11012212015 BUILDING ZONE INFORMATION System Name Zone Name Floor Area ft New Existinci Altered Removed Volume Year Built HVAC 1 Master Bedroom 1,375 16,225 HVAC 2 Casita 461 4,610 HVAC 3 & 4 GreaUKitcheNDining/Media 1,930 23,739 Bedroom 2 357 3,570 2nd Floor 719 6,759 HVAC 5 Basement 999 9,990 Totals 5,841 01 01 0 HVAC SYSTEMS System Name Qty. Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status HVAC.1 1 Central Furnace 80% AFUE Split Air Conditioner 16.5 SEER Setback New HVAC 2 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New HVAC 3 & 4 2 Central Furnace 80% AFUE Split Air Conditioner 16.5 SEER Setback New HVAC 5 1 Central Furnace 80% AFUE Split Air Conditioner 15.0 SEER Setback New HVAC DISTRIBUTION System Name Heating Duct Ducts Cooling Duct Location R-Value Tested? Status HVAC 1 Ducted Ducted Attic, Ceiling Ins, vented 8.0 D New HVAC 2 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New HVAC 3 & 4 Ducted Ducted Attic, Ceiling Ins, vented 8.0 New HVAC 5 Ducted Ducted lAttic, Ceiling Ins, vented 8.0 0 New WATER HEATING SYSTEMS S stem Name Qt . T e Distribution' Rated Input Btuh Tank Cap. al Energy Factor or RE Standby Loss or Pilot Ext. Tank Insul. R- Value Status Bradford White #M-1-75S6,k2 Large Gas All Pipes Ins 76,000 75 0.80 0.00% 1 n/a New MULTI-FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control Hot Water Piping Length ft o of Q S stem Nam,e� , , Pipe ,Len.thA Pipe Diameterl•r-T In.s.ul. k. Qty. HP Plenum Outside Buried ❑ ❑ BUILDIR G& bAt-E I Y U r I- i ❑ rr� � ^r'l S'-1'6T'Q M Ene Pro 5.1 6 Ener Soft User Number: 6712 RunCode: 2013-10-22715:04:57 ft0JE BY a-12-of 38 MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF-1 R Project Name Date Ballard Residence 11012212013 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach Used. More stringent energy measures listed on the Certificate of Compliance (CF-1 R, CF-1 R-ADD, or CF- 1 R-ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory. Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF-1 R Form with plans. Building Envelope Measures: , 116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field-fabricated windows) have a label listing the certified U-Factor, certified Solar Heat Gain Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or. installed meets Standards for Insulating Material. Indicate t e and include on CF-6R Form. §118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(i) when the installation of a Cool Roof is specified on the CF-1 R Form. *§150(a): Minimum R-19 insulation in wood-frame ceiling ore uivalent U-factor. 150(b): Loose fill insulation shall conform with manufacturer's installed desi n labeled R-Value. *§150(c): Minimum R-13 insulation in wood-frame wall orequivalent U-factor. *§150(d): Minimum R-13 insulation in raised wood-frame floor orequivalent U-factor. 150(f): Air retarding wrap is tested, labeled, and installed according to ASTM E1677-95 2000 when specified on the CF-1 R Form. 150 : Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 e 1 A: Masonry or factory-built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §150(e)1 B: Masonry or factory-built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and tight-fitting damper and or a combustion-air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High-Rise residential occupancies meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5. §115: Continuously burning pilot lights are prohibited for natural gas: fan-type central furnaces, household cooking appliances (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. 150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA. 150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c). §1506)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §1506)1 B: Unfired storage tanks, such as storage.tanks or backup tanks for solar water-heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R-value is indicated on the exterior of the tank. §1506)2: First 5 feet of hot and cold water pipes closest to water heater tank,. non-recirculating systems,'and entire length of recirculating sections of hot water pipes are insulated per Standards Table 150-13. §1506)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. §1506)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table 123-A. 150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture, a ui b ment,mainienance,pand §1506)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor ret'ard'arWdr is enclosed-eritirbly in) I IV I A conditioned space. BUILDING A . AFI=TV np:P 150(j)4: Solar water-heating systems and/or collectors are certified by the'Solar Rating and �Certificat'ibo 'Cor oration;., p?- n ♦ Y i P Il •®,d `W ILS Y—i I I FOR CONSTRUCTION . 1 EnergyPro 5.1 by EnergySoft . User Number: 6712 RunCode: 2013-10-22715:04:57 ' N lQ:;, � Page 13 of 38 MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date Ballard Residence 11012212013 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R- and 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber'adhesive duct tapes unless such tape is used in combination with mastic and draw bands. 150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. §150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. 150 m 10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and Spa H ating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating ora pilot light. §114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. 150 : Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150 Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2. 150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. 150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k). 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. §150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts=of_power per linear=foot-of illuminated cabinet. r i-lrV nC: I A n1_11NITA Y Y Y . - BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22T15:04:57 I ID: Page 14 of J8 DATE _-- D' MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF-1 R Project Name Date 11012212013 Ballard Residence §150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual-on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a manual-on occupancy sensor. §150(k)11: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer.switch that complies with the applicable requirements of §119, or by a manual- on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site is not required to comply with §150 k 11. §150(k)l2: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptionl to §150(k)l3 may be controlled by a temporary override switch which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not be high efficacy luminaires. §150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw-base socket, and consume no more than five watts of power as determined according to § 1 30d . §150(k)l5: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130, 131, 134, and 146. §150(k)16: Permanently installed lighting in the enclosed, non-dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119. CITY OF LA QUINTA ING & SAFETY DEPT. BUI�PPR OVED FOR CONSTRUCTION RPY __-- EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22T15:04:57 ID: -age 1.5=oA38 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Ballard Residence Date 10/22/2013 System Name HVAC 1 Floor Area 1,375 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 757 Return Vented Lighting Return Air Ducts Return Fan Ventilation 0 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK Sensible 17,040 0 803 0 0 0 803 18,646 COIL HTG. PEAK Heating System Latent CFM Sensible Output per System 110,000 1,352 355 19,289 Total Output Btuh 110,000 Output Btuh/s ft 80.0 736 Coolin System 0 Output per System 59,000 0 0 0 Total Output Btuh 59,000 1,352 0 Total Output (Tons) 4.9 736 Total Output Btuh/s ft) 42.9 Total Output s ft/Ton 279.7 20,761 Air System CFM per System 2,000 HVAC EQUIPMENT SELECTION Airflow cfm 2,000 Carrier 24APA760158PH'110 46,608 4,492 110,000 Airflow (cfm/s ft) 1.45 Airflow (cfm/Ton 406.8 Outside Air % 0.0% Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 46,608 4,492 Aug 3 PM 110,000 I Jan 1 AM Outside Air (cfm/s ft) 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 70 OF Q Outside Air 0 cfm Supply Fan 2,000 cfm 70 OF 70 OF 121 OF Heating Coil 121 OF ROOM 70 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112 / 78 OF 78 ! 63 Outside Air Ar 0 cfm 78/63°F OF 78 ! 63 OF 56 / 55 OF d Supply Fan Cooling Coil— 2,000 cfm 1-4 Efl - 57 155 C ........ ...... I C 1 1'''r"4��4 4 r%) i" BUILDING &� SAE ED, 63°F APPROVED, FC) UN I HUU I IUIV EnergyPro 5.1 by EnergySo(f User Number. 6712 RunCode: 2013-10-22715:04:57 fib: Page-I- 38 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Ballard Residence Date 10/22/2013 System Name HVAC 2 Floor Area 461 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 240 Return Vented Lighting Return Air Ducts Return Fan Ventilation 0 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK COIL HTG. Sensible Latent CFM 5,206 586 112 0 245 0 0 0 0 0 245 5,6961 586 PEAK Heating System Sensible Output per System 51,000 7,071 Total Output Btuh 51,000 Output Btuh/s ft 110.6 270 Cooling System 0 Output per System 23,200 0 Total Output Btuh 23,200 0 Total Output Tons 1.9 270 Total Output Btuh/s ft 50.3 Total Output s ftITon 238.4 7,611 Air System CFM per System 800 HVAC EQUIPMENT SELECTION Airflow cfm 800 Carrier 24APA524/58CVX070 17,879 2,361 51,000 Airflow cfm/s ft 1.74 Airflow cfm/Ton 413.8 Outside Air % 0.0% Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 17,879 2,361 Aug 3 PM 51,000 Jan 1 AM Outside Air cfm/s ft 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 70 OF 70 OF 130 OF Q Outside Air 0 cfm Supply Fan Heating Coil 800 cfm 70 OF 129 OF ROOM� 70 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling. Peak 112/78°F 78/64°F 78/64°F 57/56°F Outside Air 0 cfm Supply Fan Cooling Coil . 800 cfm 78 / 64 OF �qq i R�, --�� C' QF LA QU8f1`ATA _.�...... � _ -r- BU416to!/NG APP �� W Q CONSTRUC�78 �I OF DATE. _-- BY EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22715:04:57 f Page 17 of 38 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Date Ballard Residence 10/22/2013 System Name Floor Area HVAC 3 & 4 3,006 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 2 COIL CFM Total Room Loads 2,053 Return Vented Lighting Return Air Ducts Return Fan Ventilation 0 Supply Fan Supply Air Ducts COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per System 110,000 45,478 3,319 877 47,418 Total Output Btuh 220,000 0 Output Btuh/s ft 73.2 2,143 1,810 Cooling System 0 0 Output per System 59,000 0 0 0 0 Total Output Btuh) 118,000 0 2,143 0 Total Output ons 9.8 1,810 Total Output Btuh/s ft 39.3 TOTAL SYSTEM LOAD 49,764 3,319 Total Output s ft/Ton 305.7 51,038 Air System CFM per System 2,000 HVAC EQUIPMENT SELECTION Airflow cfm 4,000 Carrier 24APA760/58PH'110 92,884 9,644 220,000 Airflow cfm/s ft 1.33 Airflow cfm/Ton 406.8 220,000 Outside Air (%) 0.0% Total Adjusted System Output 92,884 (Adjusted for Peak Design conditions) 9,644 Outside Air cfm/s ft 0.00 I TIME OF SYSTEM PEAK Aug 3 PM Jan 1 AM Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 70 OF 70 OF 121 OF Outside Air 0 cfm Supply Fan Heating Coil 121 OF 4,000 cfm 3 ROOM In 70 OF 70 OF I COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 79/64°F 79/64°F 57/55°F Outside Air _ 0 cfm Supply Fan Cooling Coil 7-! 5 °F �-�/ /� p C1 4,000 cfm BUII_/^��4'.;9j'7a & ,R4iONb APP U -E 8/63°F 79/64°F FOR CONSTRUCTION I DATE BY EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22T15:04:57 CJD. —image -48 -df 38 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Date Ballard Residence 10/22/2013 System Name Floor Area HVAC 5 999 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 341 Return Vented Lighting Return Air Ducts Return Fan Ventilation 0 Supply Fan Supply Air Ducts COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per System 51,000 7,260 837 221 13,785 Total Output Btuh) 51,000 0 Output Btuh/s ft 51.1 342 526 Cooling System 0 0 Output per System 23,200 0 0 0 0 Total Output Btuh) 23,200 01 0 Total Output Tons 1.9 342 526 Total Output Btuh/s ft 23.2 TOTAL SYSTEM LOAD 837 Total Output s ft/Ton 516.7 1 7,944 14,838 Air System CFM per System 800 HVAC EQUIPMENT SELECTION Airflow cfm 800 Carrier 24APA524/58CVX070 17,720 2,620 51,000 Airflow cfm/s ft) 0.80 Airflow ctm/Ton 413.8 Outside Air % 0.0% Total Adjusted System Output (Adjusted for Peak Design conditions) I TIME OF SYSTEM PEAK 17,7201 2,620 Aug 3 PM 1 51,000 Jan 1 AM Outside Air cfm/s ft 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 69 OF 69 OF 129 OF p — -T Outside Air ' 0 cfm Supply Fan Heating Coil 129 OF 800 cfm ROOM 69 OF 70 OF COOLING SYSTEM PSYCHROMETICS Airstream Tem eratures at Time of Cooling Peak 112/78°F 78/64°F 78/64°F 58/56°F Outside Air 0 cfm Supply Fan Cooling Coil �� Q� ° 800 cfm l3U1t46?arooG�",A'O70�M P P ri 78164 OF d` % '# !i' r fid/ 64 °F FOR CONSTRUCTIO l LATE BYEnergyPro.5.1 by EnergySoft User Number. 6712 RunCode: 2013-10-22T15:04:57 ID. PaWl of 38 a ROOM LOAD SUMMARY �17-0401 V 1,352 I It35 199289 Project Name Ballard Residence - 17, 040 1,3521 Date 10/2212013 System Name HVAC 1 Floor Area 1,375 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFMSensible Latent CFM Sensible Latent CFM Sensible Master Bedroom Master Bedroom 1 757 17,040 1,352 757 17,040 1,352 355 19,289 PAGE TOTAL TOTAL* * Total includes ventilation load for 7 �17-0401 V 1,352 I It35 199289 E57 757 - 17, 040 1,3521 3551 19 289 UAIt 6T Page 20 of 38 5 ROOM LOAD SUMMARY Project Name Date Ballard Residence 10/2212013 System Name Floor Area HVAC 2 461 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFM Sensible Latent CFM Sensible Latent CFM Sensible Casita Casita 1 1 2401 5,2061 586 240 5,2061 586 112 7,071 PAGE TOTAL TOTAL* * Total includes ventilation load for zonal systems. Ener1gyPro 5.1 by EnergySoft User Number: 6712 ILDIN i & a% moo 12401 r 5; O6 Nc586. 1J� f'12 iN 7,071 1240 5, 206 586 112 7, 071 ROOM LOAD SUMMARY Ballard Residence System Name HVAC 3&4 ROOM LOAD SUMMARY Zone Name Room Living Zone GreaUKitche Bedroom 2 Bedroom 2 2nd Floor 12nd Floor User ROOM COOLING PEAK COIL Mult. CFM I Sensible Latent CFM Sensible 1 1,403 31,069 2,0181 r1,403 218 4,834 499432 113 6,116 9,576 803 169 9,158 PAGE TOTAL TOTAL* 2013-10-22715:04:57 Date 10/22/2013 Floor Area 3,006 DLING PEAK COIL HTG. PEAK isible Latent CFM Sensible 31,069 2,018 594 32,144 4,834 499 113 6,116 9,576 803 169 9,158 2,0534 478 �3t�3�19p 7 47,418 2,0,r3rt Y JF8 -' 'g,3'119 "V771 7,418 r ROOM LOAD SUMMARY Project Name Date Ballard Residence 10/22/2013 System Name Floor Area HVAC 5 999 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. I CFM I Sensible I Latent CFM Sensible I Latent CFM Sensible Basement Basement 1 3411' 7,260 837 341 7,260 837 221 13,785 PAGE TOTAL TOTAL* Total includes ventilation load for zonal EnergyPro 5.1 by EnergySoft User Ni 3410R7Q-0JgSTssd CT10)1 13,785 341 7,260 837 221 13, 85 DATE BY. ROOM HEATING PEAK LOADS Project Name Ballard Residence Date 10/2212013 ROOM INFORMATIONDESIGN CONDITIONS Room Name Master Bedroom Floor Area 1,375.0 ft Z Indoor Dry Bulb Temperature 70 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction Area U -Value R-38 Roof(R.38.2x12.16) 1,357.0 X 0.0260 Skylight 18.0 X 0.8000 R-21 Wall (W.21.2x6.16) 1,231.1 X 0.0690 Dual non Metal Tinted 160.0 X 0.3500 Double Mtl Tinted 105.9. X 0.5300 Slab -On -Grade perim = 12 1. 0 X 0.7300 X X X X X X X X X X X X X X X X X X X X X X X X Items shown with an asterisk (") denote conduction through an interior surface to another room Infiltration:[ 1.00 X 1.064 X 1,375 X 11.80 X 0.359 Schedule Air Sensible Area Ceiling Height ACp Fraction X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X AT °F = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Btu/hr 44 1,552 44 634 44 3,738 44 2,464 44 2,470 44 3,887 Page Total 14,744 -�r�y 1 T �� 1. �. , n /E X_, ��"4, 45 �LUTAG �"" al ' L��r . APPROVED FOR runt �-ot It f�f1A� TOTAL HOURLY HEAT LOSS FOR ROOM �v vv 19,Z891 --TDATE BY EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22715:04:57 I '1 page 24 of 38 ROOM HEATING PEAK LOADS Project Name Ballard Residence Date 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Casita Floor Area 461.0 ft' Indoor Dry Bulb Temperature 70 °F Time of Peak Jan 1 AM Outdoor Dry Temperature 26 OF Bulb Conduction Area U-Value AT OF Btu/hr 44 = 1,459 44 = 1,840 44 = 2,248 = = = = = = = = = = = = = = = = = = = = = = = = = = = Page Total 51547 k (])X LA Q44 p11,524 & SA°rETY DEPT. 4PPROVED R-21 Wall (W.21.2x6.16) 480.5 X X X 0.0690 X X X Dual non Metal Tinted 119.5 0.3500 Slab-On-Grade perim = 70.0 0.7300 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Items shown with an asterisk (*) denote conduction Infiltration:[ 1.00 X Schedule Air Sensible Fraction through an interior surface 1:064 X 461 X Area to another room 10.00 X 0.0214T--/f Ceiling Height AC U{LD{NG TOTAL HOURLY HEAT LOSS FOR ROOM I rQNSTRUCTiON 7,671 EnergyPro 5.1 by EnergySoft User Number 6712 RunCode: 2013-10-22T15:04:57 lJATE --- ----Page-22 X38 • ROOM HEATING PEAK LOADS Project Name Date Ballard Residence 10/2212013 ROOM INFORMATION DESIGN CONDITIONS Room Name GreaUKitchen/Dining/Media Time of Peak Jan 1 AM Floor Area 1,930.0 ft' Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 70 OF. Conduction Area U -Value AT OF Btu/hr R-38 Roof(R.38.2x12.16) 1,930.0 X 0.0260 X 44 = 2,208 R-21 Wall (W 21.2x6.16) 1,500.1 X 0.0690 X 44 = 4,554 Custom Door 32.0 X 1.0400 X 44 = 1,464 Dual non Metal Tinted 203.9 X 0.3500 X 44 = 3,140 Double Mtl Tinted 373.0 X 0.5300 X 44 = 8,698 Wood Door 24.0 X 0.5000 X 44 = 528 Slab -On -Grade perim = 161.0 X 0.7300 X 44 = 5,171 X X = X X = X X = X X = X X - X X = X X - X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = Items shown with an.asterisk (') denote conduction through an interior surface to another room Page Total 25,764 Infiltration:[ 1.00 X 1.064 X 1,930 X 10.344. 6 1 �� 12.30 X9 AC '� J i LU P'i�i lU igT �6, 3 �. i 7' Schedule Air Sensible Area Ceiling Height LX Fraction APPROVED TOTAL HOURLY HEAT LOSS FOR ROOM EnergyPro 5.1 by EnergySoft User Number., 6712 RunCode: 2013-10-22715:04:57 .�� c � � so -r ir��- n � .... .. �.. � ., � � 32 1 ,4 DATE BY— I_ID. Paae 6 0 38 ROOM HEATING PEAK LOADS Project Name Ballard Residence Date 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Bedroom 2 Floor Area 357.0 ft' Indoor Dry Bulb Temperature 70 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction Area U -Value X X X X X X X X X X X X X X X X X X X X X X. X X X X X X X X X AT OF = = = = = = = = = = = = = = = = = = = = = _ = = = = = - = = = Btu/hr R-38 Roof(R.38.2x12.16) 207.0 X 0.0260 44 237 R-21 Wall (W.21.2x6.16) 456.7 X X X 0.0690 44 1,387 Dual non Metal Tinted 98.3 0.3500 44 1,514 Slab -On -Grade perim = 56.0 0.7300 44 1,799 X X X X X X X X X X X X X X X X X X X X X X X X X X X Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X Schedule Air Sensible Fraction through an interior surface to 1.064 X 357 X Area Ceiling another room 10.00 X 0 Height AC Page Total 4,936 I t� A 1180 DEPT. 424 74/60]) FX l�-r & SAPL-TY APPROVED 4�� —TY TOTAL HOURLY HEAT LOSS FOR ROOM FOR CONSTRUCTION6, 16 l 1. EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-10-22715:04:57 of 38 4 ROOM HEATING PEAK LOADS Project Name Ballard Residence Date 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name 2nd Floor Floor Area 719.0 ftZ Indoor. Dry Bulb Temperature 70 °F Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 267F Conduction Area X X X X X X X X X X X X X X X X X X X X X -X, X X X X X X X X X to Ceiling U -Value AT °F X 44 X 44 X 44 X X. X X X X X X X. X X X X X X X X X X X X X X X X X X X Page Total CITY OF LA 51I I/ &I])I`X /� [�T'1\ A RTO' FOR CONSTRUCTION = = = = _ = = = = = = _ = = = = = = = = = = = = = = = = = = = Btu/hr R-38 Roof(R.38.2x12.16) 719.0 0.0260 823 R-21 Wall (W.21.2x6.16) 1,070.0 0.0690 3,249 Dual non Metal Tinted 176.0 0.3500 2,710 Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X Schedule Air Sensible Fraction through an interior surface 1.064 X 719 X Area another room 9.40 X0. Height AC' 6, -M4 - QUINTA �' DEDT377 / C D �! C TOTAL HOURLY HEAT LOSS FOR ROOM 9,158 DATE BY EnergyPro 5.1 by EnergySoft User Number. 6712 RunCode: 2013-10-22715:04:57 ID: Page 28 of 38 ROOM HEATING PEAK LOADS Project Name Date Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Basement Time of Peak Jan 1 AM Floor Area 999.0 ft' Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 70 OF Conduction Area U -Value AT OF Btu/hr CMU W/R-19 1,404.0 X 0.0678 X 44 = 4,187 Dual non Metal Tinted 96.0 X 0.3500 X 44 c 1,478 Slab -On -Grade perim = 150.0 X 0.7300 X 44 = 4,818 X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X X = X' X = X X = X X = X X - X X = X X = X X = X X = X X = X X = X X = X X = X X = Items shown with an asterisk (') denote conduction through an interior surface to another room Page Totals 10;f83 GITY OF LA QUINTA Infiltration: 1.00 X 1.064 X 999 X 10.00 X 0.424 IL/@Q3C k SAFE441 EPT.3, 02 Schedule Air Sensible Area Ceiling Height ACH SAT) O ED Fraction �� V FOR CONSTRUCTION TOTAL HOURLY HEAT LOSS FOR ROOM .13,7$5 DATE _----- BY EnergyPro 5.1 by EnergySoft User Number: 6712 Runcode: 2013-10-22715:04:57 Page 29 of 38 RESIDENTIAL ROOM COOLING LOAD SUMMARY Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Master Bedroom Outdoor Dry Bulb Temperature 112 OF Floor Area 1,375.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF I Outdoor Daily Range: 34 OF OQaaue Surfaces R-38 Roof(R.38.2x12.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) Orientation IWJI (SE) (S W) Area X X X X X X X X X U -Factor X X X X. X X X X X CLTD' = = = = = = = = = 1,357.0 0.0260 56.0 318.0 0.0690 30.8 '149.0 0.0690 28.8 318.0 0.0690 31.9 446.1 0.0690 29.0 Page Total IItems shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) I Fenestration Skylight Skylight 27 28 15 16 19 20 21 Orientation (1/11) (149 (NE) (NE) (S W) (SM (SW) (SW) (S W) Shaded Area 0.0 X 0.0 X 0.0 X 0.0 X 0.0 X 0.0 X 0.0 X 0.0 X 0.0 X GLF 30.9 30.9 18.1 18.1 21.7 18.1 18.1 18.1 18.1 + + + + + + + + + Unshaded Area GLF X 83.7 X 83.7 X 31.4 X 31.4 X 29.7 X 26.1 X 26.1 X 26.1,= X 26.1 Page Total = = = = = = = = 9.0 9.0 10.0 4.0 60.0 4.5 48.0 4.5 10.0 Btu/hr 1,976 675 296 700 893 4, Btu/hr 754 754 314 126 1,779 117 1,250 1.17 261 5,471 Internal Gain Btu/hr 230 Occupants 1.0 Occupants X 230 Btuh/occ. = Equipment Q•0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 75.24 X 34 = 3,164 Air Sensible CFM ELA AT I TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 17,0401 Latent Gain 1.o Occupants X I Infiltration: 4,771 X 1.16 X 75.24 X 0.00276 = Air Sensible CFM ELA AW qlfBtuh�/,oc6DF LA Q�--� II NTA BUILDING & SAFETY F APPROVE, FOR CONSTRUCTION TOTAL HOURLY LATENT HEAT GAIN FOR ROOM I 1 3 DATE BY Ener Pro 5.1 by Ener Soft User Number. 6712 RunCode: 2013-10-22T15:04:57 LIDN P -a . e30•ef 38 A RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 1 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Master Bedroom Outdoor Dry Bulb Temperature 112 OF Floor. Area 1,375.0 ft-- Outdoor Wet Bulb Temperature 78 0 Indoor Dry Bulb Temperature 78 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr X X = X X = X X = X X = X X = X X = X X = X X = X X = Page Total 0 Items shown with an asterisk ('). denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 17 (NKK 0.0 X 18.1 + 16.5 X 27.8 = 458 18 (NM 0.0 X 18.1 + 4.5 X 27.8 = 125 22, (NVV) 0.0 X 18.1 + 24.0 X 27.8 = .667 23 (NIAO 0.0 X 21.7 + 45.9 X 31.4 = 1,440 24 (NI/0 0.0 X 18.1 + 24.0 X 27.8 = 667 24 (NVV) 0.0 X 18.1 + 10.0 X 27.8 = 278 X + X = X + X = X + X = Page Total 3,635 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. = 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 75.24 X 34 = 3,164 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 17,040 Latent Gain Btu/hr Occupants 1.0 Occupants X x200-=Btub/occ--�= 200 CITY OF LA QIJINIT Infiltration: 4,771 X 1.16 X 75.24 X o.0027s = BUILDING & SAFETY 1152 Air Sensible CFM ELA AW APPROVED TOTAL HOURLY LATENT HEAT GAIN FOR ROOM ri eONSTRUCTION 1,652. Ene Pro 5.1 by Ener Soft User Number: 6712 RunCode: 2013-10-22T15:04:57 I n4OP Rv Paea31f 8 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Casita Outdoor Dry Bulb Temperature 112 OF Floor Area 461.0 ft' Outdoor Wet Bulb Temperature 78 of Indoor Dry Bulb Temperature 78 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U-Factor CLTD' Btu/hr R-21 Wall (W.21.2x6.16) (NE) 183.0 X 0.0690 X 30.8 = 389 R-21 Wall (W.21.2x6.16) (SE) 124.5 X 0.0690 X 28.8 = 247 R-21 Wall (W.21.2x6.16) (SIM 173.0 X 0.0690 X 31.9 = 381 X X = X X =. X X = X X = X X = X X = Page Total 1,017 Items shown with an asterisk (') denote conduction through an interior surface to another room. . 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 31 (NE) 0.0 X 18.1 + 4.5 X 31.4 = 141 33 (NE) 0.0 X 18.1 + 12.5 X 31.4 = 393 34 (SE) 0.0 X 18.1 + 27.5 X 22.0 = 605 35 (SE) 0.0 X 18.1 + 48.0 X 22.0 = 1,056 29 (SW) 0.0 X 18.1 + 10.0 X 26.1 = 261 30 (SW) 0.0 X 18.1 + 4.5 X 26.1 = 117 32 (SW) 0.0 X 18.1 + 12.5 X 26.1 = 326 X +. X = X + X - Page Total r 2,898 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. - - 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 25.23 X 34 = 1,061 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 5,206 Latent Gain ITY OF LA Q I I�ttNhr �n�or20' Occupants 1.0 Occupants X .00.'Atu /occ. i3UfL/�UAlI��1G &SAF®E/ Infiltration: 4,771 X 1.16 X 25.23 X 0.00276 = A P RO v 38 Air Sensible CFM -ELA AW FOR CONSTRUG-i I I TOTAL HOURLY LATENT HEAT GAIN FOR ROOM BAXE 58 Ener Pro 5.1 by Ener Soft User Number., 6712 RunCode: 2013-10-22715:04:57 ID: Pa a32 of 38 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 1 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Great/Kitchen/Dining/Media Outdoor Dry Bulb Temperature 112 OF Floor Area 1,930.0 ft' Outdoor Wet Bulb Temperature 78 of Indoor Dry Bulb Temoerature 78 of Outdoor Daily Range: 34 OF Ooaaue Surfaces R-38 Roof(R.38.2x12.16) R-21 Wall (W.21.2x6.16) Wood Door R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) Orientation (NE) (SE) Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' = = = = = = = = = 1,930.0 0.0260 56.0 405.5 0.0690 30.8 24.0 0.5000 30.8 599.1 0.0690 28.8 262.0 0.0690 31.9 233.5 0.0690 29.0 Page Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Coolina Load Temoerature Difference (CLTD) I Fpnastratinn 36 37 40 41 38 39 3 4 5 Orientation (NE) (NE) (NE) (NE) (SE) (SE) (SE) (SE) (SE) Btu/hr Z810 861 369 1,190 576 j 6,2741 Shaded Area GLF 0.0 X 34.9 0.0 X •18.1 0.0 X 21.7 0.0 X 18.1 27.5 X 18.1 4.5 X 18.1. 2.3 X 18.1 0.0 X 18.1 0.0 X 18.1 + + + + + + + +1 + Unshaded Area GLF = = = = = = = = = 32.0 X X X 51.7 4.5 31.4 108.0 35.0 48.0 X 31.4 0.0 X 22.0 0.0 X 0.0 X 2.3 X 2.3 X 22.0 22.0 22.0 22.0 Page Total Internal Gain Occupants 2.0 OccupantsX 230 Btuh/occ. _ Equipment 1.0 Dwelling Unit X 1,600 Btu = Infiltration: 1.064 X 1.16 X 105.61 X 34 = Air Sensible CFM ELA AT Latent Gain HEAT GAIN FOR ROOM 2.0 Occupants X Infiltration: 4,771 X 1.16 X 105.61 X 0.00276 = Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR &uhZo 0I� LD� N&& SAFETY AP oR®V E® FOR Btu/hr 1,655 141 3,781 1,508 499 82 42 51 51 7, 808 Btu/hr 460 1,600 41442 31,069 tu(hr 400 ,618 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name GreabKitchen/Dining/Media Outdoor Dry Bulb Temperature 112 OF Floor Area 1,930.0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U-Factor CLTD' Btu/hr X x = X X = X x = X x = X X = X x = X x = X x = X x = Page Total 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 1 (SE) 0.0 X 18.1 + 10.0 X 22.0 = 220 2 (SE) 0.0 X 18.1 + 18.0 X 22.0 = 396 6 (SE) 0.0 X 18.1 + 18.0 X 22.0 = 396 7 (SE) 0.0 X 18.1 + 40.0 x 22.0 = 880 14 (s K9 0.0 X 21.7 + 265.0 X 29.7. = 7,857 42 (NVI9 0.0 x 18.1 + 16.5 X 27.8 = 458 13 0.0 X 18.1 + 10.0 X 27.8 = 278 X + X = X + X = Page Total 10,486 Internal Gain Btu/hr Occu ants 2.0 Occupants X=E E230 Btuh/occ. 460 ui ment 1.0 Dwelling Unit X Btu = 1,600 Infiltration: 1.064 x 1.16 x 105.61 x 34 = 4,442 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 31,069 Latent Gain i--'�"OF LA CQUINTPBtu/hr Occupants 2.0 Occupants X r _ 200 _Btuh/occ. DEI T. 400 ...�/a SAFETY Infiltration: 4,771 x 1.16 X 105.61 X 0.00276 � �,p' UCTjO 1,618 Air Sensible CFM ELA AW FOR CONSTR TOTAL HOURLY LATENT HEAT GAIN FOR ROOM BY 018 Ener Pro 5.1 by Ener Soft User Number. 6712 RunCode: 2013-10-22715:04:57 ID: Page 34of 38 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 1 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Bedroom 2 Outdoor Dry Bulb Temperature 112 OF Floor Area 357.0 ftZ Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF I Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr R-38 Roof(R.38.2x12.16) (1/10 207.0 X 0.0260 X 56.0 = 301 R-21 Wall (W.21.2x6.16) (SE) 186.7 X 0.0690 X 28.8 = 371 R-21 Wall (W.21.2x6.16) (SW) 177.5 X 0.0690 X 31.9 = 391 R-21 Wall (W.21.2x6.16) (NW) 92.5 X 0.0690 X 29.0 = 185 X X = X X = X X = X X = X X = Page Total 1,248 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 8 (SE) 0.0 X 18.1 + 4.5 X 22.0 = 99 10 (SE) 0.0 X 18.1 + 13.8 X 22.0 = 304 9 (SW) 0.0 X 18.1 + 4.5 X 26.1 = 117 11 (SW) 0.0 X 18.1 + 48.0 X 26.1 = 1,250 12 (NW) 0.0 X 18.1 + 27.5 X 27.8 = 764 X + X = X + X = X + X = X + X - Page Total 2,534 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. = 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 19.54 X 34 = 822 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 4,834 Latent Gainhr Occupants 1•� Occupants X F LA QU I NV TA 200 Btuocc. I BU I DING & SAFETY DEPT Infiltration: 4,771 X 1.16 X 19.54 X 0.00276 APPROVE® 299 Air Sensible CFM ELA AW FOR CONSTRUCTION TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 499 BY Ener Pro 5.1 by Ener Soft ' User Number: 6712 RunCode: 2013-10-22715:04:57 e-95 of 38 10 'W J-1 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name 2nd Floor Outdoor Dry Bulb Temperature 112 OF Floor Area 719.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF Outdoor Daily Range:' 34 OF Ooaaue Surfaces R-38 Roof(R.38.2x12.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) R-21 Wall (W.21.2x6.16) . Orientation (VIO (SE) (S W) Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' = = = = = = = = = 719.0 0.0260 56.0 209.5 0.0690 30.8 345.5 0.0690 28.8 127.0 0.0690 31.9 388.0 0.0690 29.0 4.5 31.4 = 0.0 18.1 + + + 25.0 X X X 22.0 = 0.0 18.1 4.5 22.0 Page Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) I Fenestration 50 51 52 43 44 45 46 47 48 Orientation (NE) (NE) (NE) (SE) (SE) (SE) (SW) (NW) (NW) Btu/hr 1,047 445 686 7761 1 3,2341 Shaded Area X X X X X X, X X X GLF Unshaded Area GLF 0.0 18.1 + 4.5 X 31.4 = 0.0 18.1 + + 4.5 X X 31.4 = 0.0 18.1 4.5 31.4 = 0.0 18.1 + + + 25.0 X X X 22.0 = 0.0 18.1 4.5 22.0 = = 0.0 18.1 25.0 22.0 0.0 18.1 + +. + 96.0 X X X 26.1 = 0.0 18.1 4.0 27.8 = 0:0 18.1 4.0 27.8 = Page Total Btu/hr 141 141 141 550 99 550 2,501 111 111 Internal Gain Btu/hr Occu ants 1.0 Occupants X=E ]230 Btuh/occ. 230 ui ment 0.0 Dwelling Unit X 1Btu = 0 Infiltration: 1.064 X 1.16 X 39.34 X 34 = 1,655 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 9,576 Latent Gain Btu/hr Occupants 200 tTh/occ. A k i -r n 20 1.0 Occupants X t y ,0F �i ` Infiltration: 4,771 X. 1.16 X 39.34 X 0.00276 = BUILDING &SAFETY •60 Air Sensible CFM ELA AW APPROVED FOR CONSTRUCTION TOTAL HOURLY LATENT HEAT GAIN FOR ROOM ' 80.8 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 1 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name 2nd Floor Outdoor Dry Bulb Temperature 112 OF Floor Area 719.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF. Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr X X = X X = X X = X X = X X = X X =. X X = X X _ X X = Page Total 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 49 (NKK 0.0 X 18.1 + 4.0 X 27.8 = 111 X + X = X + X = X + X = X + X _ X + X = X + X = X + X = X + X = Page Total 111 Internal Gain Btu/hr Occupants 1.0 Occupants X 230 Btuh/occ. = 230 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 39.34 X 34 = 1,655 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 9,576 Latent Gain 200 I -Y OF LA Ol P i �./-� Occupants 1.0 Occupants X t h occ. - 00 SAFlE�T1r" BU1 ING Infiltration: 4,771 X 1.16 X 39.34 X 0.00276 = l& APPRO V D 60 Air Sensible CFM ELA ow FOR CONSTRUCTION TOTAL HOURLY LATENT HEAT GAIN FOR ROOM80' BALTE Rid: I Ene rqvPro 5.1 6v Ener Soft User Number: 6712 RunCode: 2013-10-22715:04:57 ID: Page 37 of 38 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Ballard Residence 10/22/2013 ROOM INFORMATION DESIGN CONDITIONS Room Name Basement Outdoor Dry Bulb Temperature 112 OF Floor Area 999.0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 78 OF Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U-Factor CLTD' Btu/hr CMU W/R-19 (NE) 300.0 X 0.0678 X 30.8 = 626 CMU W/R-19 (SE) 354.0 X 0.06.78 X 28.8 = 690 CMU W/R-19 (SW) 300.0 X 0.0678 X 31.9 = 648 CMU W/R-19 (NW) 450.0 X 0.0678 X 29.0 = 884 X X = X X = X X = X X = X X = Page Total 2,�9 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr 53 (SE) 0.0 X 18.1 + 96.0 X 22.0 c 2,112 X + X = X + X = X + X = X + X = X + X = X + X = X + X = X + X = Page Total. 2,112 Internal Gain Btu/hr Occupants 0.0 Occupants X 230 Btuh/occ. = 0 Equipment 0.0 Dwelling Unit X 1,600 Btu = 0 Infiltration: 1.064 X 1.16 X 54.67 X 34 = 2,299 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM x,260 r Latent Gain 0.0 X SAFETYri 0 Occupants Occupants R® FCONSTRUCTI Infiltration: 4,771 X 1.16 X 54.67 X o.0027s =37 Air Sensible CFM ELA AW By TOTAL HOURLY LATENT HEAT GAIN FOR' ROOM D 7 Ener Pro 5.1 by Ener Soft User Number. 6712 RunCode: 2013-10-22715:04:57 ID: Pa-e 38 of 38