06-0693 (RER)P.O. BOX 1504
78495 CALLE TAMPICO
LA QUINTA,'CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Application Number: 06-00000693"- Owner:
Property Address: 52545 AVENIDA *VALLEJO MIGUEL GONZALEZ
r APN: 773-292-013-1 .=000000 52545 AVENIDA VALLEJO
Application description: REMODEL - RESIDENTIAL. LA QUINTA, CA 92253
Property Zoning: COVE RESIDENTIAL Other struct info . . . .
Application valuation: 3050
Contractor:
Applicant: Architect or Engineer: Owner
DITION 2001.
LICENSED CONTRACTOR'S DECLARATION `
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
License Class: License No.: '
Date: Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following'reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for. the alleged exemption. Any violation of Section 7031.5 by
Napplicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
r- the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
+ Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 I, as owner of the property,.am exclusively contracting with licensed contractors to construct the project ISec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
_ property who'builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State Licse Law.).
1—) I am exempt under Sec. , B.&P . 14r thA reason
Date:i��� Owner:
�;MSTRUMON LENDING AGENCY
- I hereby affirm under penalty of perjury that there is, a construction lending agency for the performance of the
work for which.this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERMIT
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 8/09/06
C.
AUG 09 2006
C
CITY OF LA QUINTA
FINANCE DEPT.
------------------
WORKER'S COMPENSATION DECLARATION
1 hereby affirm under. penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
_ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier - - - - - - - - - - - - - - - - - - - --- - Policy Number
I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, ifI shou become subje to the kers compensation provisions of Section
QQ,, cr p�3700 of the Labor Co , I shal orth th com with those provisions.
Date?) - 1' L/6 Applicant:
WARNING: FAILURE TO SECURE W ERS'. COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. -
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application, _
the owner, and. the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permii issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I -certify that I have read this application and state that the abo information is correc I agree to comply with all
city and county ordinances and state laws relating to bui in construction, and her authorize representatives
of this county to
enter upon the above-mentioned prop y r inspection rposes -
Date: ! VO Signature (Applicant or Agent):
. Application Number 06-00000693
Permit ... BUILDING PERMIT
" Additional desc .
` Permit Fee 15.0'0
Plan Check Fee'.
9.75 -
Issue Date•
Valuation
50
Expiration Date 2/05/07
Qty Unit Charge Per
Extension
BASE FEE
15.00
Permit MECHANICAL
".
Additional desc
Permit Fee 37.50
Plan Check Fee
9.38
Issue -Date
Valuation . .. ..
. 0
Expiration Date 2/05/07
Qty Unit Charge Per
Extension
'BASE FEE
`'
15.00
1:00 9.0000 EA MECH FURNACE <=100K
9.00
1.00. 4.5000 EA MECH VENT,INST/
DUCT ALT;
4.50
1.00 9.0000 EA MECH APPL
REP/ALT/ADD-.
9.00
-------------------_-------- ------------------_--------------------_------------
Special Notes and Comments
. REPLACE 14 WINDOWS/NEW 13 SEER A/C ALL
PER NEW ENERGY CALCS-DUCT TESTING
REQUIRED.
--------------------------------------------
Other Fees . . . .... "_ ENERGY
REVIEW FEE
.98
Fee summary Charged Paid
Credited -
Due
Permit Fee Total 52.50
.00 .00
52.50
Plan Check Total 19.13
00 .00
19.13
Other Fee Total 98
.00 .00
.98
"Grand Total 72.61
.00 .00
72.61,
LQPERMIT -
TELEPHONE (760) 777-7012 FAX (760) 777-7011
OWNER/BUILDER INFORMATION'
Dear Property Owner:
An application for a building permit has been submitted in your name listing yourself as the builder of the property
improvements specified. ' r
i
For your protection you should', be aware that as "Owner/Budder" you are the responsible party of record on such a
permit. Building permits are not required to be signed by property owners unless they are personally performing their
own work. If your work is being performed by someone other than yourself, you may protect yourself from possible
liability if that person applies for the proper permit in his or her name.
Contractors are required by law to be licensed and bonded by the State of California and to have a business license
from the City or County. They"are also required by law to put their license number on all permits for which they
apply.
n
If you plan to do your own work, with the exception of various trades that you plan to subcontract, you should be
aware of the following information for your benefit and protection:
If you employ or otherwise engage any persons other than your immediate family, and the work (including materials
and other costs) is $200.00 or more for the entire project, and such persons are not licensed as contractors or
subcontractors, then you may be an employer.
If you are an employer, you must register with the State.and Federal Government as an employer and you are subject
to several obligations include . State and Federal income tax. withholding, federal social security taxes, worker's
compensation insurance, disability insurance costs and unemployment compensation contributions.
There may be financial risks for you if you do not carry out these obligations, and these risks are especially serious with
respect to worker's compensation insurance.
For more specific information about your obligations under Federal Law, contact the Internal Revenue Service (and, if
you wish, the U.S. Small Business Administration). For more specific information about your obligations under State
Law, contact the Department of Benefit Payments and the Division of Industrial Accidents.
If the structure is intended for sale, property owners who are not licensed contracts are allowed to perform their
work personally'or through their own employees, without a licensed contractor or subcontractor, only under limited
conditions.
A frequent practice of unlicensed persons professing to be contractors is to secure an "Owner/Builder" building
permit, erroneously implying that the property owner.is providing his or her own labor and material personally.
Building permits are not required to be signed by property owners unless they are performing their own work
personally.
Information about licensed contractors may be obtained by contacting the Contractors' State License Board in your
community or at 1020 N. Street, Sacramento, California 95814.
Please complete and return the, enclosed owner -builder verification form so that we can confirm that you, are aware of
these matters. The building permit will not be issued until the verification is returned.' '
Very truly yours,
CITY OF LA QUINTA -
DEPT. OF BUILDING AND SAFETY
78-495 Calle Tampico
La Quinta, CA 92253
SSL( S &Vz- k)7-
PROPERTY
v<PROPERTY ADDRESS
PERMIT NUMBER(S)
0
CITY F LA QUINTA
BUILDIN. & SAFETY DEPT.
'AP ROVED
FOR C STRUCTION
DATEAB)l�
I I I
6
0
CITY F LA QUINTA
BUILDIN. & SAFETY DEPT.
'AP ROVED
FOR C STRUCTION
DATEAB)l�
I I I
�/
j
Kzi��1=��
S�x3�xo
v,f . G6
S.fLCr �6
/;
/i
g� Ljo �o
-
5 t -lo, l08
S i��1' Ox
rl�
•
S i��1' Ox
� � • G 6
TITLE 24 REPORT
Title 24 Report for:
i GONZALES RESIDENCE
CITY OF LA QUINTA 52545 Avenida Vallejo
BUILDING & SAFETY DEPT. La Quinta , CA 92253
APPROVED
FOR CONSTRUCTION
DATE ;6 B
Project Designer:
LENCH DESIGN STUDIO INC
P O BOX 450
LA QUINTA, CA 92247-0450
760/564-1866
Report Prepared By:
VERNA LENCH
Lench Design Studio; Inc.
x P.O. Box 450
La Quinta, CA 92247-0450
(760) 564-1866
Job Number:
VL-1403
• Date:
8/9/2006
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.1 by EnergySoft Job Number: VL-1403 User Number: 5454
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF -1 R Certificate of Compliance 3
Form MF -1 R Mandatory Measures Summary 7
Form WS -5R Residential Kitchen Lighting 9
HVAC System Heating and Cooling Loads Summary 10
Room Load Summary 11
Room Heating Peak Loads 12
Room Cooling Peak Loads 13
r
EnergyPro 4.1 by EnergySoft Job Number: VL -1403 User Number. 5454
}
EnergyPro 4.1 by EnergySoft Job Number: VL -1403 User Number. 5454
Certificate Of Compliance: Residential (Part 1 of 4) CF -1 R
C3QN7AI ES RESIDENCE
Project Title
(E) 90 deg
Raised Floor Area:
8/9/2006
Date
52545 Avenida yalle'a
I a Qtj'nta
Slab on Grade Area:
1,318 ft2
Project Address
Average Ceiling Height:
Building Permit #
Lench Design Studi
Inc_
Number of Dwelling Units:
(760) 564-1866
Documentation Author
Avg. SHGC: 0.68
Number of Stories:
Telephone Plan Check/Date
FneravPro
Complia ce Method
# of Thermostat
Vent
15 Field Check/Date
Climate Zone
TDV EnergyUse
Standard
Proposed
Compliance
(kBtu/sf-yr
Design
Design
Margin
Space Heating
1.15
1.19
-0.03
Space Cooling
60.37
68.30
-7.93
Fans
9.08
10.29
-1.21
Domestic Hot Water
14.84
5.24
9.61
Pumps
0.00
0.41
-0.41
Totals
85.45
85.43
0.03
Percent better than Standard:
0.0%
BUILDING COMPLIES - HERS VERIFICATION REQUIRED
Building Type:
[j] Single Family
❑ Addition
Total Conditioned Floor Area: 1,318 ft2
❑ Multi Family
❑ Existing + Add/Alt
Existing Floor Area: n/a ft2
Building Front Orientation:
(E) 90 deg
Raised Floor Area:
0 ft2
Fuel Type:
Natural Gas
Slab on Grade Area:
1,318 ft2
Fenestration:
Average Ceiling Height:
8.3 ft
Area: 239 ft2
Avg. U: 0.66
Number of Dwelling Units:
1.00
Ratio: 18.1%
Avg. SHGC: 0.68
Number of Stories:
1
BUILDING ZONE INFORMATION
# of Thermostat
Vent
Zone Name
Floor Area Volume
131 1n 9,14
Units Zone Type Type
1 00_ Cnnriefinner, Setback
Hgt. Area
n
HVAr
OPAQUE SURFACES
Type Frame Area U -Fac.
Rnpf Wnnd 1 'A1R nn2n
Wall Wnnd 45 n.071
Door None 20 0.500
Wall Wnnd 31 0 071
Wall Wnnd 134 0.071
Wall Wnnd 31R n 07
Wall Wnnd 1q2 n n71
Wall Wnnd 141 0071
Wall Wond 54 0.071
Wall Wnnd 74 n 07
Insulation Act. Gains Condition
Cay. Cont. Azm. Tilt Y /
N Status
R-49 R-0.0 Af) 0
IN
®
®❑New_
®
®
®
®
®
®
®
❑
❑
❑
❑
❑
❑❑
❑❑❑
❑❑
❑New
❑New
❑
❑New
❑New
❑New
❑New
❑New
❑New
❑
❑
❑
❑
❑
New
R-1ri—B-4 5 90 90
None R-0.0 90 90
R-15 R-45 . () 90
R-15 R-4.5 AG go
R-15 R-4.5 180 _9Q
R-15 R-4 5 270 90
R-15 R-4 5 gn
R-15�-4 b AZO gn
R-15 R 1_0 —9.0
JA IV Reference Location / Comments
01-A19 ZONE 1
09-A4 ZONE 1
2R -A4 ZONE 1
09-A4 ZONE 1
09-A4 ZONE 1
09-A4 ZONE 1
09-A4 ZONF 1
09-A4 ZONF 1
09-A4 ZONE 1
09-A4 ZONE 1
EnergyPro 4.1 by EnergySoft User Number: 5454 Job Number: VL -1403 Page:3 of 14 1
Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R
GONZALES RESIDENCE 8/9/2006
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U -Factor' SHGC2 Azm. Tilt Stat. Glazing Type Comments
1
2
Window Front
Window Front
(E)
(E)
10"0 0.680 NERC 0.68 NERC 90 -,U New Jeld-Wen 510
20.0 0.660 NFRC 0_68 NFRC .90 90 New Jeld-Wen 520
7QNF 1
ZONE 1
3
Window Front
(E)
10.0 0.680 NFRC 0_68 NFRC
90 90 New Jeld-Wen 510
ZONE 1
4
Window Left
(S)
20.0 0.660 NFRC 0_68 NFRC
180 90 New Jeld-Wen 520
ZONE 1
5
Window Left
(S)
20.0 0.660 NFRC 0_68 NFRC
180 90 New Jeld-Wen 520
ZONE 1
6
Window Rear
(W)
20.0 0.660 NFRC 0.68 NFRC
270 90 New Jeld-Wen 520
ZONE 1
L
Window Rear
(y)
14.0 0.680 NFRC 0_68 NFRC 270 90 New Jeld-Wen 510
ZONE 1
8
Window Right
(N)
40.0 0.660 NFRC 0_68 NFRC
0 90 New Jeld-Wen 520
ZONE 1
3
Window Right
(N)
6.0 0.660 NFRC 0.68 NFRC _0 90 New Jeld-Wen 520
ZONE 1
-M
Window Right
(N)
9.0 0.660 NFRC AM NFRC 0 90 New Jeld-Wen 520
ZONE 1
11
Window Rear
(W)
40.0 0.660 NFRC 0_68 NFRC
270 90 New Jeld-Wen 520
ZONE 1
12
Window Right
(N)
30.0 0.660 NFRC 0_68 NFRC
0 90 New Jeld-Wen 520
ZONE 1
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B.
INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin
# Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len.
Right Fin
Hgt. Dist. Len. Hgt.
1
2
3
4
5
6
7
8
9
10
11
12
Bug Screen
Bug Screen
Bug Screen
Bug Screen
Bug Screen
Roll -down Awning
Roll -down Awning
Bug Screen
Bug Screen
Bug Screen
Roll -down Awning
Bug Screen
0.76
0.76
0.76
0.76
0.76
0.13
0.13
0.76. 6.7 6.0
0.76 1.5 4.0
0.76 3.0 3.0
0.13 6.7 6.0
0.76
10.0 0.1 10.0 10.0
10.0 0.1 10.0 10.0
10.0 0.1 10.0 10.0
10.0 0.1 10.0 10.0
THERMAL MASS FOR HIGH MASS DESIGN
Type
Area Thick. Heat Inside
(sf) (in.) Cap. Cond. R -Val. JA IV Reference
Condition
Status
Location/
Comments
PERIMETER LOSSES
Insulation
Condition
Location/
Type
Length R -Val. Location JA IV Reference
Status
Comments
Slab Perimeter
150 None No Insulation 26-A1
New
ZONE 1
Run Initiation Time: 08/09/06 08:53:19 Run Code: 1155138799
EnergyPro 4.1 by EnergySoft User Number: 5454 Job Number: VLA403 PageA of 14
Certificate Of Compliance: Residential - (Part 3 of 4) CF -1 R
GONZALES RESIDENCE 8/9/2006
Project Title Date
HVAC SYSTEMS
Heating Minimum Cooling Minimum Condition Thermostat
Location Type Eff Type Eff Status Type
HVAC Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback
HVAC DISTRIBUTION
Location
Duct Duct Condition Ducts
Heating Cooling Location R -Value Status Tested?
HVAC Ducted Ducted Attic 4.2 New Yes
Hydronic Piping pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS Ratedl Tank Energy Standbyl Tank Insul.
Water Heater # in Input Cap. Condition Factor Loss R -Value
System Name Type Distribution Syst. (Btu/hr) (al) Status or RE 1 (%) Ext.
Laars JVH075LD(I/L) (1) - X Instant Gas Recirc/Time+Temp 1 75,000 0 New 0.82 750 n/a
MultkFamily Central Water Heating Details
Hot Water Pump Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum 'Outside Buried Insulation
1 For small gas storage (rated input — 75000 Btu/hr), electric resistance and heat pump water heaters, list energy factor.
For large gas storage water heaters (rated input > 75000 Btu/hr), list Rated Input, Recovery Efficiency and Standby Loss.
For instantaneous gas water heaters, list Rated Input, and Recovery Efficiency.
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Documentation Author
Name: VERNA LENCH
Title/Firm: LENCH DESIGN STUDIO INC Title/Finn: Lench Design Studio, Inc.
Address: • P O BOX 450 Address: P.O. Box 450
Title/Firm:
Address:
Telephone:
La Quinta, CA 92247-0450
Telephone• 760 564-1866
(signature) (date)
(signature/stamp) (date)
EnergyPro 4.1 by EnergySoft User Number: 5454 Job Number: VL -1403 Paae- 5 of 14 1
Certificate Of Compliance: Residential (Part4 of 4) CF -1R
GONZALES RESIDENCE 8/9/2006
Project Title Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local enforcement
agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the
mequacy of the special /ustmcation ana aocumentation submlttea.
Plan I Field
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC-
approved HERS provider using CEC approved testing and/or verification methods and must be reported on the CF4R Plan Field
installation certificate.
The HVAC System "HVAC' incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R.
The HVAC System "HVAC" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve.
I EnergyPro 4.1 by EnergySoft User Number. 5454 Job Number: VL -1403 Pam:6 of 14 1
• f
Mandatory Measures Summary: Residential (Pagel of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent
compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated
into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory
measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not
applicable.
N/A
DESIGNER
ENFORCE -
MENT
Building Envelope Measures
❑
❑X
❑
§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
❑X
❑ -
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑X
❑
§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑.
N.
El
apply to exterior mass walls).
§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor.
❑
❑
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
t
1. Masonry and factory -built fireplaces have:
❑
❑X
❑
• a. closable metal or glass door covering the entire opening of the firebox
❑
❑X
❑
b. outside air intake with damper and control, flue damper and control
❑
❑X
❑
2. No continuous burning gas pilot lights allowed.
❑
❑X
❑
§ 150(f): Air retarding wrap installed to comply will 151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑ '
❑X
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation, alone without facings'no greater than 0.3%, water vapor
❑
❑X
❑
permeance rate no greater than 2.0 perm/inch.
❑
❑X
❑
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and
El❑.
include CF -6R Form:
❑
❑X
❑
§ 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
• f
Page:7 of 14
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑X
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
Coefficient (SHGC), and infiltration certification.
❑
❑X •
❑
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑X
❑
Space Conditioning, Water Heating and Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
N.
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA.
❑
❑X
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with
❑
❑X
❑
insulation having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑X
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source
❑
❑X
❑
and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture,equipment
❑
❑X
❑
maintenance, and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant oris enclosed
❑
❑X
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑X
❑
EnergyPro4.1 by EnergySoft User Number: 5454 -Job Number: VL -1403
Page:7 of 14
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent
compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (") below. When this checklist is incorporated
into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory
measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not
applicable.
ENFORCE -
N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,
❑X ❑
605, and Standard 6-5; supply -air and retum-air ducts and plenums are insulated to a minumum installed level of
680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh
❑x
or tape shall be used.
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than
❑ ❑X ❑
sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause
X❑
reductions in the cross-sectional area of the ducts.
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑ 2 ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
119(d).
4. Exhaust fan systems have back draft or automatic dampers.
❑ 2 ❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑ 2 ❑
dampers.
Page:8 of 14
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑ ® ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ 2 ❑
§ 114: Pool and Spa Heating Systems and'Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch "mounted outside of the
❑ 2 ❑
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ® ❑
b. Cover for outdoor pools or outdoor spas.
❑ 2 ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ 2 ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ 2 ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ® ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are
electric and have an output frequency no less than 20 kHz.
§ 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ 2 Elluminaire
has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑ 2 ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑X ❑
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are
❑ ❑X ❑
controlled by an occupant sensor that complies with Section 1'19(d) that does not tum on automatically or have an
always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑X ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑
❑X
❑
same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article
680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑
❑x
❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑
X❑
❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section
119(d).
EnergyPro4.1 by EnergySoft User Number. 5454 Job Number. VL -1403
Page:8 of 14
4 ,
Residential Kitchen Lighting Worksheet WS -5R
GONZALES RESIDENCE 8/9/2006
Project Title Date
At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires
as defined in Table 150-0. Luminaires that are not high efficacy must be switched separately.
Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens.
Luminaire Type High Efficacy? High Efficacy
Watts Quantity Watts Other Watts
REDCompact Fluorescent Trip/Quad 4pin Yes X No 98.0 x 1 = 98 or
EiecD Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or,
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x - or
Yes No x = or
Yes No x = or
Yes No x. = or
Yes No x . = or
Yes No x = or
Yes No x = or
Yes No .x = or
Yes No x = or
Total A: 98 B: 0
COMPLIES IF A,'-- B YES ® NO ❑
EnergyPro 4.1 by Energysoft User Number. 5454 Job Number: VL -1403 Page:9 of 14
1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
GONZALES RESIDENCE 8/9/2006
SYSTEM NAME FLOOR AREA
HVAC 1,318
Number of Systems
1
Heating System
Output per System
89,000
Total Output (Btuh)
89,000
Output (Btuh/sgft)
67.5
Cooling System
Output per System
46,500
Total Output (Btuh)
46,500
Total Output (Tons)
3.9
Total Output (Btuh/sgft)
35.3
Total Output (sgft/Ton)
340,1
Air System
CFM per System
1,680
Airflow (cfm)
1,680
Airflow (cfmisgft)
1.27
Airflow (cfmrron)
433.5
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
Note: values above given at ARI conditions
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
I Sensible
Latent
CFM
I Sensible
1,33
19,367
2,019
414
20,998
0
DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures
at Time of Cooling
2,327
1,938
0
0
0
0
0
0
0
0
Supply Air Ducts
0
2,3271
1,938
24,0J 2,0191 24875
Bryant 550AN048-E/311JAV048110 29,103 14,339 89,000
Total Adjusted System Output 28,103 14,339 89,000
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2m Jan 12 am
EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak
26.0°F 68.9°F 68.9°F 118.70F
Supply Air Ducts
Outside Air "
0 cfm 117.6 OF
Supply Fan Heating Coil
1680 cfm ROOMS
68.9 OF 70.0 °F
EnergyPro 4.1 by EnergySoft User Number. 5454 Job Number: VL -1403 Page:10 of 14 1
IE
Return Air Ducts S
DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures
at Time of Cooling
Peak
111.0/77.6°F
79.3/67.7°F 79.3/67.7°F
63.0/62.1°F
Supply Air Ducts
0
Outside Air
0 cfm
Supply Fan Cooling Coil
64.3 / 62.5 OF
1680 cfm
ROOMS
57.9% R.H.
°F
78.0 / 67.3 OF
79.3/67,7
Return Air Ducts
I
EnergyPro 4.1 by EnergySoft User Number. 5454 Job Number: VL -1403 Page:10 of 14 1
ROOM LOAD SUMMARY . . :1
PROJECT NAME
GONZALES RESIDENCE
DATE
8/9/2006
SYSTEM NAME
HVAC
FLOOR AREA
1,318
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL.HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
ZONE 1
ZONE 1
1
1,331
19,367
2,019
1,331
19,367,
2,019
414
20,998
PAGE TOTAL 1 1,331 19,367 2,019 414 20,998
TOTAL 1 1,331 19,367 2,019 414 20,998
EnergyPro By EnergySoft User Number: User Job Number. VL -1403 Page: 11 of 14
ROOM HEATING PEAK LOADS
Project Title Date
GONZALES RESIDENCE 8/9/2006
Room Information Desicin Conditions
Room Name ZONE 1 Time of Peak Jan 12 am
Floor Area 1,318 Outdoor Dry Bulb Temperature 260E
Indoor Dry Bulb Temperature 70°F
Conduction
R-49 Roof Attic
Slab -On -Grade
R-1 5 Wall wil
Wood Door
R-15 Wall w11"
Jeld-Wen 510
Jeld-Wen 520
Aeld-wen 510
R-15 Wal w/1"
.Iplfi-Wpn 590
Jeld-Wen 520
R-1 5 Wall w "
Jeld-Wen 520
lelfl-Wen 590
Jeld-Wen 520
Jeld-We 520
IR -15 -Wall xmM"
Area
1,318.0
perimeter = 149.9
44.8
20.0
31.2
133.9
10.0
20.0
10.0
317.6
20.0
20.0
191.6
20.0
141.0
40-0
6.0
9.0
54.4
74.0
30.0
U -Value
X
X
x
X
X
X
X
x
x
x
x
X
x
x
x
x
x
x
X
X
x
x
X
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
OT of
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Btu/hr
44
1,160
44
4,815
44
139
44
440
44
97
44
416
44
299
44
581
44=
299
986
44
581
44
581
44=
595
44=
581
44
419
44
438
44
1 1A9
44
174
44
261
44
169
44
1jRq
44
230
44
871
Items shown with an asterisk (•r) denote conduction through an interior surface to another room. Page Total: 16 453
Infiltration: 1.00 x 1.064 x 1 318 x 8.30 x 0.532 /60] x = 4545
chedule Air Sensible Area Ceiling Height ACH pT
Fraction
TOTAL HOURLY HEAT LOSS FOR ROOM 201,998
EnergyPro 4.1 by EnergySoft User Number: 5454 Job Number: VL -1403 Page:12 of 14
RESIDENTIAL ROOM COOLING LOAD SUMMARY
Project Title Date
GONZALES RESIDENCE 8/9/2006
Room Information Desicin Conditions
Room Name: ZONE 1 Outdoor Dry Bulb Temperature: 1120F
Floor Area: 1,318 sf Outdoor Web Bulb Temperature: 780F
Indoor Dry Bulb Temperature: 78OFOutdoor Daily Range: 340F
opaque 5urtaces
R-49 Roof Attic
R-15 Wall w/1" EPS Interior
Wood Door
R-15 Wall w/1" EPS Interior
R-15 Wall w/1" EPS Interior
R-15 Wall w/1" EPS Interior
R-15 Wall w/1" EPS Interior
R-15 Wall w/1" EPS Interior
Orientation
Area
1,318.0
x
X
X
X
X
X
X
X
X
X
X
X
U -Factor
X
X
X
X
X
X
X
X
X
X
X
X
CLTD 1
=
=
=
=
=
=
=
=
Btu/hr
E
0.0200
56.0
1,476
E
44.8
0.0705
33.0
104
E
20.0
0.5000
33.0
330
N
246.2
0.0705
23.0
399
E
133.9
0.0705
33.0
312
S
317.6
0.0705
26.0
582
(W)
191.6
0.0705
33.0
446
(W)
54.4
0.0705
33.0
127
38.4+
9.0x
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
Window
2050
SH
Window
4050
FO
Window
2050
SH
Window
5040
XO
Window
5040
XO
Window
5040
XO
Window
7020
XO
Window
6068
SL DR
Window
4016
XO
Window
3030
XO
0.0x
17.9+
_ 20.0X
Page Total 1 3.7771
Orientation
1.16 X
Shaded
Area
X
X
x
X
GLF
+
+
+
Unshaded
Area
X
X
X
Ix
Page
GLF
79.2=
78.8=
79.2=
38.6 =
38.6 =
25.4=
25.8=
38.4
38.
Total
E
0.0x
38.8+
10.0x
E
0.0x
38.4+
20.0X
E
0.0x
38.8+
10.0x
S
0.0
38.4
20.0
S
0.0
38.4
20.0
W
0.0x
17.9+
_ 20.0X
W
0.0x
18.3+
14.0X
N
0.0
38.4
40.0
N
0.0x
38.4+
6.0X
N
O.Ox
38.4+
9.0x
Btu/hr
Internal Gain Btu/hr
Occu ants 4 X Occupants X 230 Btuh/occ. = 920
E ui ment 1 X Dwelling Units X 1,6001 Watts/sqft = 1.6001
Infiltration: 1.064 X 1.16 X 83.51 X 1 3.5121
Air Sensible CFM ELA Z�T
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 19,3671
Latent Gain
Occu ants X Occupants X 200 Btuh/oCC. _
Btu/hr
800
Infiltration: 4 771 x
1.16 X
83.51 X
0.00263 = 1 219
Air Latent
CFM
ELA
pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM
2,019
EnergyPro 4.1 by EnergySoft User Number: 5454 Job Number: VL -1403 Page: 13 of 14
RESIDENTIAL ROOM COOLING LOAD SUMMARY
ue surraces
Orientation Area U -Factor CLTD 1
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
Internal Gain
rage i Dial
Shaded Unshaded
Orientation Area GLF Area GLF
W 40.0x 17.9+ 0.0x 25.4
N 0.0 X 38.4 + 30.0 X 38.4
X + X
x + X
x + X
X + X
X + x
X + X
X + X
X + X
X + X
Page Total
Btu/hr
Btu/hr
716
1,153
1 869
Btu/hr
Occu ants 4X Occupants X 1 230 Btuh/OCC. = 920
E ui ment 1 X Dwelling Units X 1 1,6001 Watts/sgft = 1 1,6001
Infiltration: 1.064 X X 83 51 X = 3 512
Air sensible CFM EIA Z�'T
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 19367
Latent Gain Btu/hr
Occupants F 41 X Occupants X 200 Btuh/ocC. = 800
Infiltration: 4 771 x 1.16 x 83.51 x 0.00263 = 1 219
Air Latent CFM ELA pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 2,019
EnergyPro 4.1 by EnergySoft User Number. 5454 Job Number: VL -1403. Page: 14 of 14
X
x
x
x
x
X.
X
X
X
X
X
X
x
x
x
X
x
x
X
X
X
X
X
X
=
=
=
=
=
=
Items shown with an asterisk (') denote conduction through an interior surface to another room.
1. Cooling Load Temperature Difference (CLTD)
Fenestration
Internal Gain
rage i Dial
Shaded Unshaded
Orientation Area GLF Area GLF
W 40.0x 17.9+ 0.0x 25.4
N 0.0 X 38.4 + 30.0 X 38.4
X + X
x + X
x + X
X + X
X + x
X + X
X + X
X + X
X + X
Page Total
Btu/hr
Btu/hr
716
1,153
1 869
Btu/hr
Occu ants 4X Occupants X 1 230 Btuh/OCC. = 920
E ui ment 1 X Dwelling Units X 1 1,6001 Watts/sgft = 1 1,6001
Infiltration: 1.064 X X 83 51 X = 3 512
Air sensible CFM EIA Z�'T
TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 19367
Latent Gain Btu/hr
Occupants F 41 X Occupants X 200 Btuh/ocC. = 800
Infiltration: 4 771 x 1.16 x 83.51 x 0.00263 = 1 219
Air Latent CFM ELA pW
TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 2,019
EnergyPro 4.1 by EnergySoft User Number. 5454 Job Number: VL -1403. Page: 14 of 14