BRES2015-0138t
i
�r
F
78-495 CALLS TAMPICO ,
LA QUINTA, CALIFORNIA 92253_ COMMUNITY DEVELOPMENT DEPARTMENT
BUILDING PERMIT
Application Number: BRES2015-0138
Property Address:
52565 AVENIDA VALLEJO
APN:
773292014
Application Description:
MAC NIEL/REPLACE (9) WINDOWS
Property Zoning:
Application Valuation:
$6,500.00
Applicant:
LOWE'S HOME CENTERS LLC
1000 LOWE'S BLVD
ATTN TAX DEPT
MOORESVILLE, NC 28117
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License, is in full force and effect.
License Class: B /License No.: 99118`
8332 -
Date/ Contractor:!
OWNER -BUILDER D CLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolisK, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3
of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
I ) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the'structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements.
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(� I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
( ) I am exempt under Sec. . . B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY .
I hereby affirm under penalty of perjury that there is a construction.lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. Q.
Lender's Name:
Lender's Address:
VOICE (760) 777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Owner:
ROBERT MAC NEIL
52565 AVENIDA VALLEJO
LA QUINTA, CA 92253
Contractor,
LOWE'S HOME CENTERS LLC
1000 LOWE'S BLVD
ATTN TAX DEPT
MOORESVILLE, NC 28117
(704)758-1000
LIc. No.: 991832
Date: 4/15/2015
o
c
z 7-
m
0rn0
r�
M 0
m � O
33
1
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following -declarations:
I have and will maintain a certificate of consent to self-insu're for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of th ,k for which this permit is issued.
I have and will maintain workers' compensation insurance, as required by
Sel.ori 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance -carrier and policy number are:
Carrier: _ Policy Number:
I certify that in the performance of the work for which this permit is.issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Date:
l� /v Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERA IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit. .
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation..
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws rela -to building
construction, and hereby authorize representatives of this city to ent upo the above.
menti ed prop rty f r inspection purposes.
Date: '% I. Signature (Applicant or Agent):
/,owe')
FINANCIAL • ' + •
= K u DESCRIRTION� ' r, i c ''� ACCOUNT @ QTY ` € RAMOUNT . , PAID °
, ♦ j
I PAID DATE'
BSAS SB1473 FEE 101-0000-20306 0 $1.00 $0.00
.G
Vl PAlDkBY�,, l�� ab:: METHOD�any� ;RECEIPT # CHECK # %A°
..>-.
t•CLTD BY c
' Total Paid for BUILDING STANDARDS ADMINISTRATION BSA' $1.00 $0.00
DESCRIP.TION�
`a �x ACCOUNT .;�
;QTY
{ AMOUNT }
PAID
PAID DATE
SMI - RESIDENTIAL
101-0000-20308
0
$0.85
$0.00
Tr ':fly PAIDBY��`'
*` F ,�' METHODS ". c,:RECEIPT#
°CHECK#t aCLT
DBYi'
Total Paid forSTRONG MOTION INSTRUMENTATION SM! $0.85 $0.00
"':DESCRIPTION a`'"-
ACCOUNTT 3 c
QTY
e= AMOUNT, %PAID,s
r a=
PAID DATE'
DOOR/WINDOW, REPLACE FIRST 7
101-0000-42400
0
• $60.91
$0.00
of
M PAIDgBY ' �?
z : :r {O METHOD,`
F RECEIPT If ,,
{
s CHECK #� 'I Y
CLTD BY
r �.
DESCRIPTION �,.
x
°`?.ACCOUNT .:> ..ani
QTY
IAMOUNT=`:
c .. r
PAID
vl—T
3
PAID DATE;
DOOR/WINDOW, REPLACE, EA ADDITION 5
101-0000-42400
0
$10.15
$0.00
PAID BY+:r a``;?'
:;� METHOD . K.
,Y: RECEIPT # *.�..
, {CHECK # '
CLTD BY-,:
DESCRIPTION `�
ACCOUNT a
QTY'
` AMOUNT f
x s
PAID
PAID DATE''
DOOR/WINDOW, REPLACE, EA -ADDITION 5
PC
101-0000-42600
0
$11.60
$0.00
-PAID-BY,
METHOD s
RECEIPT #
CHECK #��
CLTD BY
DESCRIPTION 4 y `a
?; M: ACCOUNT ;: g.r
:QTY
" fAMOUNT:f:a
�Y i.: �PAIO .z
!PAID DATE
DOOR/WINDOW, REPLACE, FIRST 7 PC
101-0000-42600
0
$110.22
$0.00
,'PAID BY
&� METHOD'
RECEIPT# ,
"CHECK#i
£CLTD BY"
Total Paid for WINDOW/SLIDING GLASS DOOR/FENESTRATION: $192.88 $0.00
TOTALS:00
Description: MAC NIEL/REPLACE (9)' WINDOWS
`NAME ' w
ADDRESSI
Type: BUILDING, RESIDENTIAL Subtype:. REMODEL
Status: UNDER REVIEW
Applied: 4/15/2015 SKH
Approved:
Parcel No: 773292014 Site Address: 52565 AVENIDA VALLEJO LA QUINTA,CA 92253
Subdivision: SANTA CARMELITA VALE LA QUINTA Block: 153
Lot: 2
Issued:
UNIT 16
NC
28117
Lot Scl Ft: 0 Building Scl Ft: 0
Zoning:
Finaled:
Valuation: $6,500.00 Occupancy Type:
Construction Type:
Expired:
No. Buildings: 0 No. Stories: 0
No. Unites: 0
28117
Details: REPLACE (9) WINDOWS [2013 ENERGY]. 2013 CALIFORNIA BUILDING CODES.
NAME TYPE ' f
`NAME ' w
ADDRESSI
• •
CITY
STATE • :
ZIP`
PHONE FAX EMAILA:
APPLICANT
LOWE'S HOME CENTERS LLC
1000 LOWE'S BLVD
MOORESVILLE
NC
28117
(760)396-7072
CONTRACTOR
LOWE'S HOME CENTERS LLC
1000 LOWE'S BLVD
MOORESVILLE
NC
28117
(760)396-707.2
OWNER
ROBERT MAC NEIL
52565 AVENIDA
VALLEJO
LA QUINTA
CA
92253
(760)396-7072
Printed: Wednesday, April 15, 2015 10:45:59 AM 1 of 2 O
sysrrMs
r�=:4
�. `DESCRIPTION
c ,r,• _Y !' us
ACCOUNT
QTY
,. :. Vit:
.AMOUNT
F�•Ci i:'iw.............
^113 £.p
PAID DATE
F
;RECEIPT#°
'_•`. ,Wa.w...,
"CHECK#,
.w..w....
METHOD
4 '; PAID BY
D
f
SMI - RESIDENTIAL
101-0000-20308
0.
$0.85
$0.00
Total Paid forSTRONG MOTION INSTRUMENTATION SMI: $0.85 $0.00
DOOR/WINDOW,
101-0000-42400
0
$60.91
$0.00
REPLACE FIRST 7
-
DOOR/WINDOW,
REPLACE, EA ADDITION
101-0000-42400
0
$10.15
- $0.00'
S.
DOOR/WINDOW,
REPLACE, EA ADDITION
101-0000-42600
0
$11.60
$0.00.
SPC
DOOR/WINDOW,
101-0000-42600
0
$110.22
$0.00
REPLACE, FIRST 7 PC
Ll
Total Paid forWINDOW/SLIDING GLASS
$192.88 $0.00
DOOR/FENESTRATION:
TOTALS:•4•D
INSPECTIONS
SEQID INSPECTION TYPE- - INSPECTOR :SCHEDULED COMPLETED
RESULT" REMARKS " NOTES
PATE,µ
FINAL" BLD
PARENT PROJECTS ...
Printed: Wednesday, April 15, 2015.10:45:59 AM 2 of 2
SYSTEMS
Bin #
Qty Of La Qu►nta
Building 8T Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012.
Building Permit Application and Tracking Sheet
Permit # ' t'j
Project Address: S Z S dIxDA
Owner's Name:
A. P. Number:
Address: S Z 5'61 ,S
Legal Description:
City, ST, Zip:
Contractor:L s � GU �Telephone:
'%100 ?94' D 72 -
aAddress:"
Address: 7 .5 '"((,d
Project Description: N `
t! Od �✓3
City, ST, Zip: a,o 14;,%
Telephone: fps'
E
!,d 0 elm
State Lic. # : City Lic. #-.
Arch., Engr., Designer:
Address:
City, ST, Zip:
Telephone:
:,. :.��'p
Construction TY Pe: Occupancy:
c7:
State Lic. #:hP
'
ect Pro'a circle one): New Addn Alter Repair. Demo
J. )
Name of Contact Person:
Sq. Ft.: (
# Stories:
# Units:
Telephone # of Contact Person: G Q p fir Z0 (�
. Estimated Value of Project:
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Recd
TRACKING
PERMIT FEES
Plan Sets
Plan Check submitted
Item
Amount
Structural Cafes.
Reviewed, ready for corrections
Plan Check Deposit
Truss Cafes.
Called Contact Person
Plan Check Balance
Title 24 Cafes.
Plans picked up
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
2'! Review, ready for correctionshssue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading ,
IN ROUSE:-
3" Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
9SS�S££606 L
uoL}onj}suo0 0. aaJyl '£Z=60 5�-*O-SLOZ'
VVV
r.
1
.:....:. ... <. .. ...
t`
,
7
e.
f
:
i
i
k.
-.r
s�
...........
i'
...... ..::
„r.............. .
•r
LA
(
�.. ......
......
:.......
�,:i :..��
:�1 k �j,
FE
:-
,
. r.
' 1Y
?T t
..........
............
.:....:.........
t
._ .
.........:
_v..... .,, ... .... ..,..............�
... it .. ... .... .:. ... ..... ... .. ......
..........., .. .... .. .. ...,. .....;�.,..._.........
... ... _.
9SS�S££606 L
uoL}onj}suo0 0. aaJyl '£Z=60 5�-*O-SLOZ'
BUILDING ENERGY ANALYSIS REPORT
PROJECT:,
Remodel Residence
52-565 Avenida Vallejo
La Quinta 'CA 92253
,Project Designer:
Mark Powers Lowes
52-565 Avenida Vallejo
la Quinta, CA 92253
(614) 546-9646
r '
Report Prepared by:
Jon. Scott
Scott Design and Title -24, Inc,
77-085 Michigan Drive
Palm Desert, CA 92211
(760) 200-4780 '
Job Number:
5
CITY CIT,
SUILDINT.
Date: o�ED
4/10/2015
FOR CONST UCTION
DATE �
Y
The EnergyPro computer program has been used to perform the calculations summarized in this-compli i d is
• authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Buildi En gy E iciency Standards.
4 , This program developed by EnergySoft, LLC — www.energysoft.com.
EnergyPro 6.5 by EnergySoft User Number.- 6712 ID:
,. i
J
CERTIFJOE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE IOD
Project Name: Remodel Residence Ca culation Date/Time: 15:22, Fri, Apr 10, 2015
Calculation Description: Title 24 Analysis
Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
CF 1 F-01
Page 1 of 7
GENERAL INFORMATION
01
Project Name Remodel Residence
02
Calculation Description Title 24 Analysis
03
Project Location 52-565 Avenida Vallejo
04
City La Quinta
05
Standards Version Compliance 2015
06
Zip Code 92253
07
Compliance Manager Version BEMCmpMgr 2013-3c (710)
08
Climate Zone CZ15
09
Software Version EnergyPro 6.5
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 90
12
Project Scope Addition and/or Alteration
13
Number of Dwelling Units 1
14
Total Cond. Floor Area (FT2) 1836
15
Number of Zones 1
16
Slab Area (FT2) 1836
17
Number of Stories 1
18
Addition Cond. Floor Area 0
19
Natural Gas Available Yes
20
Addition Slab Area (FT?) 0
21
Glazing Percentage (%) 12.0%
COMPLIANCE RESULTS
01 Building Complies with Computer Performance
02 This building DOES NOT require HERS Verification
03 This building incorporates one or more Special Features shown below
ENERGY USE SUMMARY
04
05
06
07
08
Energy Use
(kTDV/ft2-yr)
Standard
Design
Proposed
Design
Compliance
Margin
Percent
Improvement
Space Heating
6.79
6.62
0.17
2.5%
Space Cooling
235.69
230.76
4.93
2.1%
IAQ Ventilation
0.00
0.00
0.00
0.0%
Water Heating
12.07-
12.07
0.00
0.0%
Photovoltaic Offset
--
0.00
0.00
—
Compliance Energy Total
254.55
249.45
5.10
2.0%
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-10 15:23:02
CERTIFOF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OD CF1�F-01
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015 Page 2 of 7 �-
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• — None 2
Cooling System Verifications:
-- None —
HVAC Distribution System Verifications:
• — None —
Domestic Hot Water System Verifications:
• -- None —
ENERGY DESIGN RATING
This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on-site renewable energy system.
Reference Energy Use Energy Design Rating Margin Percent Improvement
Total Energy (kTDV/f2-yr)* 303.93 .298.83 5.10 1.7%
includes calculated Appliances and Miscellaneous Energy Use (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
Project Name -
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
-Cooling Systems
Number of Water
Heating Systems
Remodel Residence
1836
1
3
1
1
1
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Residence
Conditioned
HVAC1
1836
14
DHW Sys 1
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider:
Report Generated at: 2015-04-10 15:23:02
CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE D -
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015
Calculation Description: Title 24 Analysis
Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
CFIOF-01
Page 3 of 7
OPAQUE SURFACES .-
01
02
03 -
04
05
06
07
08
09
10
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft2)
Window & Door
Area (ft2)
Tilt
(deg)
Status
_ Verified
Existing
Condition
N Wall ex
Residence
R-13 Wall
0
Right
720
27
90
Existing
No
E Wall ex
Residence
R-13 Wall
90
Front
1080
89.5
90
Existing
No
S Wall ex
Residence
R-13 Wall
180
Left
720
36
90
Existing
No
W Wall ex
Residence
R-13 Wail
270
Back
1080
101.6
.90
Existing
No
Roof
Residence
Default 1978 to present
S Wali ex (Left -180)
- - 1
1 1836
0.30
0.29
Existing
No
ATTIC
01
02
03
04
05
06
07
08
09
10
03 04 05
06
07
08
09
10
Radiant
Name
Statu
Verified Existing
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Barrier
Cool Roof
s
Condition
Attic Residence
Attic RoofResidence
Ventilated
w 3
0.1
0.85
No
No
Ex9 ti
No
0.29
Insect Screen (default)
Altered
N/A
4x4 altered .30-.29
E Wall ex (Front -90)
- -- 1
16.0
0.30
0.29
WINDOWS
01
02
03 04 05
06
07
08
09
10
11
Name
Surface (Orientation -Azimuth)
Multiplie
Width(ft) Height (ft) r
Area (ft2)
U -factor
SHGC
Exterior Shading
Status
Verified
Existing
Condition
3x3 altered .30-.29
N Wall ex (Right -0)
-- - 1
9.0
0.30
0.29
Insect.Screen (default)
Altered
N/A
6x3 altered .30-.29
N Wall ex (Right -0)
-- - 1
18.0
0.30
0.29
Insect Screen (default)
Altered
N/A
4x4 altered .30-.29
E Wall ex (Front -90)
- -- 1
16.0
0.30
0.29
Insect Screen (default)
Altered
N/A
8x5 altered .30-.29
E Wali ex (Front -90)
- - 1
40.0
0.30
0.29
Insect Screen (default)
Altered
N/A
4x4 altered .30-.29 2
S Wali ex (Left -180)
- - 1
16.0
0.30
0.29
Insect Screen (default)
Altered
N/A
4x5 altered .30-.29
S Wall ex (Left -180)
- - 1
20.0
0.30
0.29
Insect Screen (default)
Altered
N/A
6x3 altered .30-.29 2
W Wall ex (Back -270)
- - 1
18.0
0.30
0.29
Insect Screen (default)
Altered
N/A
8x6.7 altered .30-.29
W Wall ex (Back -270)
- - 1
53.6
0.30
0.29
Insect Screen (default)
Altered
N/A
3x1 altered .30-.29
W Wall ex (Back -270)
- -- 1
3.0
0.30
0.29
Insect Screen (default)
Altered
N/A
3x1 altered .30-.29 2
W Wall ex (Back -270)
- - 1
3.0
0.30
0.29
Insect Screen (default)
Altered
N/A
6x4 altered .30-.29
W Wall ex (Back -270)
- -- 1
24.0
0.30
0.29
Insect Screen (default)
Altered
N/A
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-10 15:23:02
CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCEOD
Project Name: Remodel Residence Ca culation Date/Time: 15:22, Fri, Apr 10, 2015
Calculation Description: Title 24 Analysis
Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
CFIPF-01
Page4of7
DOORS
01
02
01
02.
03
04 05 06
Name
Side of Building
Area (ft)
U -factor Status Verified Existing Cowdition
5x6.7 ex
E Wall ex
33.5
0.50 Existing No
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
08
09
Name
Zone
Total Cavity
Winter Design
Edge Insul. R -value
Construction Name
Surface Type
Construction Type
Framing
R -value
U -value
Assembly Layers
180
None
0.8
No
Existing
No
• Cavity/Frame: no insul. /2x4 Top Chid
2x4 Top Chord of Roof Truss @ 24
Roof Deck: Wood Siding/sheathing/decking
Attic RoofResidence
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
Default 1978 to present
attic)
Wood Framed Ceiling
2x4 @ 16 in. O.C.
R11
0.083
Over Floor Joists: R-1.9 insul.
• Inside Finish: Gypsum Board
• Cavity/Frame: R -13/2x4
• Exterior Finish: Wood
R-13 Wall
Exterior Walls
Wood Framed Wall
2x4 @ 16 in. O.C.
R 13
0.095
Siding/sheathing/decking
SLAB FLOORS
01
02
03
04
05
06
07
08
09
Name
Zone
Area (ft)
Perimeter
(ft)
Edge Insul. R -value
Carpeted
Fraction
Heated
Status
Verified
Existing
Condition
Covered Slab ex
Residence
1836
180
None
0.8
No
Existing
No
BUILDING ENVELOPE - HERS VERIFICATION
01 02 03. 04
Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage ACH @ 50 Pa
Not Required Not Required Not Required —
WATER HEATING SYSTEMS
01
02
03
04
05
06
07
.08
Name
System Type
Distribution Type
Water Heater
Number of
Heaters -
Solar
Fraction
(%)
Status
Verified Existing
Condition
DHW Sys 1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
Annual
Existing
No
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-10 15:23:02
CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE AOD CFP*F-01
Project Name: Remodel Residence Ca culation Date/Time: 15:22, Fri, Apr 10, 2015 Page 5 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50
0.61 EF
40000-Btu/hr
0
0
WATER HEATING - HERS VERIFICATION
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation with
Manual Control
Recirculation with
Sensor Control
DHW Sys 1
n/a
n/a
n/a
n/a
n/a
n/a
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
07
08
09
Multi -speed
Heating System
Cooling System
System Type
EER SEER
Zonally. Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10.42
12
Distribution
Fan
Floor Area
Verified Existing
Name
System Type
Name Ducted
Name Ducted
System
System
Served
Status
Condition
HVAC1
Other Heating and
Heating
Yes
Cooling
Yes
Air Distribution
HVAC Fan
1836
Existing
No
Cooling System
Component 1
Component 1
System 1 -
1
HVAC - HEATING SYSTEMS
01 02 03
Name Type Efficiency
Heating Component 1 CntrlFurnace - Fuel -fired central furnace 80 AFUE
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
Efficiency
Multi -speed
Name
System Type
EER SEER
Zonally. Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10.42
12
No
No
N/A
system
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider:
Report Generated at: 2015-04-10 15:23:02
CERTIF•E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OD CFF-01
Project Name: Remodel Residence Calculation Date/Time: 15:22,.Fri, Apr 10, 2015 -Page 6 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xm1
HVAC - DISTRIBUTION SYSTEMS
01
02
03
04
05
06
07
08
09,•
10
Insulation
Supply Duct
Return Duct
Verified Existing
HERS
Name
Type
• Duct Leakage
R -value
Location
Location
Bypass Duct
Status
Condition
Verification
Air Distribution
Ducts located in attic
Existing (not
4.2
Attic
Attic
None
Existing
No
N/A
System 1
specified)
IAQ (Indoor Air Quality) FANS -
01 02' 03 04 05
Name - IAQ CFM IAQ Fan Type IAQ Recovery Effectiveness(%) HERS Verification
SFam IAQVentRpt 0 Default 0 Not Required
COOLING VENTILATION
01 02 03 04
Name Cooling Vent CFM Cooling Vent Watts./CFM Number of Fans
WH Fan 1 61 0.52459 1
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider: '
Report Generated at: 2015-04-1015:23:02
CERTIFOF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE JOID CFF-01
Project Name: Remodel Residence Calculation Date/Time: 15:221 Fri, Apr 10, 2015 Page 7 of 7.
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
• 4
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name: Documentation Author Signat on d. SCOtt
Jon Scott
Company: Signature Date:
Scott Design and Title 24, Inc, 4/10/2015
Address:
CEA/HERS Certification Identification (If applicable):
77-085 Michigan Drive -
City/StatePArn Desert, CA 92211
Phone: (760) 200-4780
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
Responsible Designer Name:
Responsible Designer Signature:
Mark Powers
Company:
Date Signed:
Mark Powers Lowes
Address:
License:
52-565 Avenida Vallejo
City/State/Zip:
Phone:
la Quinta, CA 92253
(614) 546-9646
Registration Number: Registration.Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider:
Report Generated at: 2015-04-10 15:23:02
e -
•
F ---q
L ---A
RESIDENTIAL MEASURES SUMMARY
RMS -1
Project Name
Remodel Residence
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
4/10/2015
Project Ad6ress .
52-565 Avenida Vallejo La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
1,836
Addition
0
# of Units
1
INSULATION
Construction Type
Area
Cavity (ft) Special Features Status
Roof Wood Framed Attic R11 1,836 Existing
Wall Wood Framed R 13 3,346 Existing
Door Opaque Door - no insulation 34 Existing
Slab Unheated Slab -on -Grade - no insulation 1,836 Perim = 180' Existing
Demising Wood Framed - no insulation 429 Existing
FENESTRATION I Total Area: 221 Glazing Percentage: 12.0%1New/Altered Average U -Factor: 0.30
Orientation Area(ft) U -Fac SHGC Overhang Sidefins Exterior Shades Status
Right (N) 27.0 0.300
0.29 none none Bug Screen Altered
Front (E) 56.0 0.300
0.29 none none Bug Screen Altered
Left (S) 36.0 0.300
0.29 none none Bug Screen Altered
Rear (Ko 101.6 0.300
0.29 none none Bug Screen Altered
HVAC SYSTEMS
Qty. Heating Min. Eff
Cooling Min. Eff Thermostat Status
1 Central Furnace 80% AFUE
Split Air Conditioner 12.0 SEER Setback
Existing
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
HVAC Ducted
Ducted Attic 4.2
Existing
WATER HEATING
Qty. Type Gallons Min. Eff Distribution Status
EnergyPro 6.5 by EnemySoft User Number. 6712
RunCode: 2015-04-10715:23:24 ID:
Pae 10 of 14
2013 Low -Rise Residential Mandatory Measures Summary
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the
- compliance approach used. Excentions may annly. Review the resnective code sertion fnr mnre infnrmntinn
Building Envelope Measures:
§ 110.6(a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§ 110.6(a)5: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC and infiltration that meets the requirements of 10-111 a .
§110.7: Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed.
§I 10.8(a): Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R.
§ 110.8(i): The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of § 110.8(i) when the
installation of a cool roof is specified on the CFI R.
§110.80): A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CF1R.
Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a
§ I50.0(a): rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The
attic access shall be gasketed to prevent air leakage.
§I50.0(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -value.
§ I50.0(c): Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U -
factor).
§ I50.0(d): Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U -factor.
In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior
§150.0(g)1:
walls, vented attics and unvented attics with air -permeable insulation.
In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II
§ 150.0(g)2:
vapor retarder.
In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of
§ I50.0(g)3: the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section
150.0(d).
§ 150.0(1): Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%;
have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration;
and when installed as part of a heated slab floor meets the requirements of § 110.8
150.0 Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U-
§ (q)' factor of 0.58; or the weighted average U -factor of all fenestration shall not exceed 0.58.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
§150.0(e)IA: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§I50.0(e)I B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device.
§150.0(e)IC: Masonry or factory -built fireplaces have a flue damper with a readily accessible control.
§I50.0(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside
of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110.0-§ 110.3: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission.
§ 110.3(c)5: Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation
valve, and recirculation loop connection requirements of § 110.3(c)5.
Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli-
§110.5: antes without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool
ands a heaters.
§I50.0(h)1: Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified
in §150.0(h)2.
§ 150.0(h)3A: Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any
dryer vent.
§150.0(i): Heating systems are equipped with thermostats that meet the setback requirements of §I10.2(c).
§150.00)1A: Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§150.00)1B: Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external
insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank.
For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage
tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system
I50.00)2A: regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and
all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3-
A.
§ 150.00)2] All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve
that allows for installation, removal, and replacement of the enclosed pipe and insulation.
4
4
4
2013 Low -Rise Residential Mandatory Measures Summary
§150.0Q)2C:
Pipe for cooling system lines shall be insulated as specified in §I50.00)2A. Piping insulation for steam and hydronic heating
systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A.
150.0 ')3:
Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
'
Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For
§ I50.00)3A:
example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or
painted with coating that is water retardant and provides shielding from solar radiation that degrades the material.
Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I
§150.00)3B:
or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor
retarder.
Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3
feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the
§150.0(n)l:
space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed
water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000
Btu/hr.
§I50.0(n)2:
Recirculating loops serving multiple dwelling units shall meet the requirements of §1 10.3(c)5.
§ I50.0(n)3:
Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC)
or by a testing agency approved by the Executive Director.
Ducts and Fans Measures:
All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0,
§603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition.
Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC
§605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing
(RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed
§150.0(m)l:
with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or
aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than '/4 inch, the
combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums
defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying
conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms
shall not be compressed to cause reductions in the cross-sectional area of the ducts.
Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints
§ 150.0(m)2:
and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is
used in combination with mastic and draw bands.
§I50.0(m)3-6:
Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other
requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling.
§ 150.0(m)7:
All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic
dampers.
§ I50.0(m)8:
Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers
except combustion inlet and outlet air openings and elevator shaft vents.
Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not
§ I50.0(m)9:
limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum,
sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is
water retardant and provides shielding from solar radiation.
§I50.0(m)l0:
Flexible ducts cannot have porous inner cores.
When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be
§I50.0(m)11:
sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference
Residential Appendix RA3.
Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal
§I50.0(m)12:
conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of
$150.0 m 12.
Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the
placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The
§ I50.0(m)13:
space conditioning system must also demonstrate airflow > 350 CFM per ton of nominal cooling capacity through the return
grilles, and an air -handling unit fan efficacy:5 0.58 W/CFM as confirmed by field verification and diagnostic testing, in
accordance with Reference Residential Appendix RA3.
Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode,
§ I50.0(m)l5:
an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of >_ 350 CFM per ton of nominal cooling
capacity, and operating at an air -handling unit fan efficacy of <_ 0.58 W/CFM as confirmed by field verification and diagnostic
testing, in accordance with Reference Residential Appendix RA3.
All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of
§ 150.0(0):
central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the
Whole Building Ventilation.
§150.0(o)IA:
Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with
Reference Residential Appendix RA3.
Pool and Spa Heating Systems and Equipment Measures:
Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
§ 110.4(a):
Regulations; an on-off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat
setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating.
4
2013 Low -Rise Residential Mandatory Measures Summary
§ 110.4(b)1:
Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction
and return lines, or built-up connections for future solar heating.
§ 110.4(b)2:
Outdoor pools or spas that have a heat pump or gas heater shall have a cover.
§I 10.4(b)3:
Pdols shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro -
rammed to run only during off-peak electric demand periods.
§ 110.5:
Natural gas pool and spa heaters shall not have a continuous burning pilot light.
§ 150.0(p):
Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements.
Lighting Measures:
§ 110.9:
All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9.
§150.0(k)IA:
Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with §I50.0(k) in accordance with TABLE
150.0-A or TABLE 150.0-B, as applicable.
§I50.0(k)IB:
When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply
with the applicable provisions of § 150.0(k).
The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with
§150.0(k)IC:
§ I30.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has
been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180
watts of low efficacy lighting er electrical box.
§150.0(k)1D:
Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz.
Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no
§150.0(k)IE:
more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §130.0(c). Night lights do not need to
be controlled by vacancy sensors.
§I50.0(k)IF:
Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable
requirements of § 150.0(k).
§ 150.0(k)2A:
High efficacy luminaires must be switched separately from low efficacy luminaires.
§ I50.0(k)2B:
Exhaust fans shall be switched separately from lighting systems.
§ 150.0(k)2C:
Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.
§ I50.0(k)2D:
Controls and equipment are installed in accordance with manufacturer's instructions.
§I50.0(k)2E:
No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with §I50.0(k).
§I50.0(k)2F:
Lighting controls comply with applicable requirements of §110.9.
An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer
§ I50.0(k)2G:
according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5; and all other
requirements in §150.0(k)2.
An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § 150.0(k) if: it
§ 150.0(k)2H:
functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements
of §130.5; and all other requirements in §150.0(k)2.
§ I50.0(k)2I:
A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the
functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in §150.0(k)2.
§ I50.0(k)3A:
A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only
§ 150.0(k)3B:
the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are
considered kitchen lighting if they are not separately switched from kitchen lighting.
§ 150.0(k)4:
Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated
cabinet.
§I50.0(k)5:
A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom
shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6:
Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§I50.0(k)7:
Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high
efficacy, or shall be controlled by either dimmers or vacancy sensors.
Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other
nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is. airtight with air leakage less than 2.0
CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing
§ I50.0(k)8:
and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and
allow ballast maintenance and replacement without requiring cutting holes in the ceiling.
For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § I50.0(k), the ballasts
shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9.
For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the
same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and
§ I50.0(k)9A:
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically
reactivates the motion sensor within 6 hours; and
iii. Controlled by one of the following methods:
2013 Low -Rise Residential Mandatory Measures Summa
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is
programmed to automatically turn the outdoor lighting OFF during daylight hours; or
" c. Znergy management control system which meets all of the following requirements: At a minimum provides the functionality of
an astronomical time clock in accordance with § 110.9; meets the Installation Certification requirements in §130.4; meets the
requirements for an EMCS in § 130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor
lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
§150.0(k)9B: following requirements:
i. Shall comply with § 150.0(k)9A; or
ii. Shall comply with the applicable requirements in § 110.9, § 130.0, ' 130.2, § 130.4, 23140.7 and § 141.0.
§I50.0(k)9C: For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by §I50.0(k)9B or 150.0(k)9D
shall comply with the applicable requirements in §110.9, $130.0, '130.2, $130.4, $140.7 and § 141.0.
§ 150.0(k)9D: Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply
with the applicable requirements in §110.9, § 130.0, § 130.2, § 130.4, § 140.7 and §141.0.
§ I50.0(k)10: Internally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined
according to $130.0(c).
§I50.0(k)11: Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for
nonresidential garages in § 110.9 ' 130.0 § 130.1 ' 130.4, ' 140.6 and § 141.0.
In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of
§150.0(k)12A: the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20
percent of the floor area, permanently installed lighting in that building shall:
§I50.0(k)1213: i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
Solar Ready Buildings:
Single family residences located in subdivisions with ten or more single family residences and where the application for a
§I 10.10(a)1: tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014,
shall comply with the requirements of 23110.10 b through § 110.10 e .
§110.10(a)2: Low-rise multi -family buildings shall comply with the requirements of §110.10(b) through §110.10(d).
The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke
ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a
local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than
80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for
§I 10.10(b)1: buildings with roof areas greater than 10,000 square feet.
For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less
than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or
on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the
building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area.
§ 110.10(b)2: All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north.
§ 110.10(b)3A: No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be
located in the solar zone.
Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice
§ 110.10(b)3B: the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the
horizontal projection of the nearest point of the solar zone measured in the vertical plane.
§ 110.10(b)4: For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly
indicated on the construction documents.
The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit
§ 110.10(c): from the solar zone to the point of interconnection with the electrical service (for single family residences the point of
interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating
system.
§I10.10(d): A copy of the construction documents or a comparable document indicating the information from §I10.10(b) through §I 10.10(c)
shall be provided to the occupant.
§ 110.10(e)1: The main electrical service panel shall have a minimum busbar rating of 200 amps.
The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a
§ 110.10(e)2: future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or
main circuit location, and permanently marked as "For Future Solar Electric".
F- -1
L
CERTIFOF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE *OD CFP#F-01
Project Name: Remodel Residence Ca culation DatelTime: 15:22, Fri, Apr 10, 2015 Page 1 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
GENERAL INFORMATION
01
Project Name Remodel Residence
02
Calculation Description Title 24 Analysis
03
Project Location 52-565 Avenida Vallejo
04
City La Quinta
05
Standards Version Compliance 2015
06
Zip Code 92,253
07
Compliance Manager Version BEMCmpMgr 2013-3c (710)
08
Climate Zone CZ15
09
Software Version EnergyPro 6.5
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 90
12
Project Scope Addition and/or Alteration
13
Number of Dwelling Units 1
14
Total Cond. Floor Area (FT2) 1836
15
Number of Zones 1
16
Slab Area (FT2) 1836
17
Number of Stories 1
18
Addition Cond. Floor Area 0
r„ 19
Natural Gas Available Yes
20
Addition Slab Area (FT2) 0 - I
21
Glazing Percentage (%) 12.0%
COMPLIANCE RESULTSJ7 t
01 Building Complies with Computer Performanc"
02 This buildingDOES NOT re uire HERS Veiifica i - � t7 x
q a V,. r ..f1...#
03 This building incorporates one o ,,moreSpecial ~e ��es shown
TA
k..0 `i1' f
L. -V r.'� t -A
4 ENgRY,Y VSE b UMMARY
04
5 0 U i'I
06
07
08
Energy Use
(kTDV/ft2-yr)
S n and 7
D 'gn
Proposed
Design
Compliance
Margin
Percent
Improvement
Space Heating
.79
6.62
0.17
2.5%
Space Cooling
235.69
230.76
4.93
2.1%
IAQ Ventilation
0.00
0.00
0.00
0.0%
Water Heating
12.07
12.07
0.00
0.0%
Photovoltaic Offset
—
0.00
0.00
—
Compliance Energy Total
254.55
249.45
5.10
2.0%
Registration Number: 215-A0094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-0410 5:23:08
CERTIFOF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE AOD CFp f F-01
Project Name: Remodel Residence Calculation DatelTime: 15:22, Fri, Apr 10, 2015 Page 2 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. -
HERS FEATURE SUMMARY
The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is
provided in the building components tables below.
Building -level Verifications:
• – None –
Cooling System Verifications:
• – None –
HVAC Distribution System Verifications:
• –None –
Domestic Hot Water System Verifications:
• -- None --
ENERGY DESIGN RATING
This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual
TDV energy consumption for lighting and components hot regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an
on-site renewable energy system. �- ,«,,� • ,�
Refe er nce Energy Use' Energy Design Rating Margin Percent Improvement
—71
Total Energy (kTDV/f2-Yr)' N�30343' ft 298.83 5.10 1.7%
` includes calculated Appliances and Miscellaneous Energy, (AMEU)
BUILDING - FEATURES INFORMATION
01
02
03
04
05
06
07
` Project Name
Conditioned Floor Area (ft2)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of Ventilation
Cooling Systems
Number of Water
Heating Systems
Remodel Residence
1836
1
3
1
1
1
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft2)
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Residence
Conditioned
HVAC1
1836
14
DHW Sys 1
Registration Number: 215-A0094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25. HERS Provider: CalGERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-10 15:23:08
CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OD CFF -01
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015 Page 3 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xm1
OPAQUE,SURFACES %
01
02
03
04
05
06
07
08
09
10
Name
Zone
Construction
Azimuth
Orientation
Gross Area (f:2)
Window & Door
Area (ft)
Tilt
(deg)
Status
Verified
Existing
Condition
N Wall ex
Residence
R-13 Wall
0
Right
720
27
90
Existing
No
E Wall ex
Residence
R-13 Wall
90
Front
1080
89.5
90
Existing
No
S Wall ex
Residence
R-13 Wall
180
Left
720
36
90
Existing
No
W Wall ex
Residence
R-13 Wall
270
Back
1080
101.6
90
Existing
No
Roof
Residence
Default 1978 to present
0.29
Insect Screen (default)
1836
N/A
44 altered .30-.29 2
Existing
No
ATTIC
01
02
03
04
05
06
07
08
09
10
X02 ,k
X03
Ww 0 vi 05
' 061
OW
' s 0e `"
Radiant
10
Statu
Verified Existing
Name
Construction
Type
Roof Rise
Roof Reflectance
Roof Emittance
Barrier
Cool Roof
s
Condition
Attic Residence
Attic RoofResidence
Ventilated
3
0.1
0.85
No
No
E�9 t�
No
- 1
18.0
0.30
0.29
Insect Screen (default)
Altered
N/A
44 altered .30-.29
E Wall ex (Front -90)
-
- 1
16.0
0.30
0.29
Insect Screen (default)
Altered
N/A
-8x5 altered .30-.29
E Wall ex (Front -90)
-
WINDOWSE1
01
X02 ,k
X03
Ww 0 vi 05
' 061
OW
' s 0e `"
09
10
11
Name
:.
Surface (Orientation -Azimuth) Width(ft)
,,, `
Multiplie
Height (ft) r
" I
Area (ft)
U t K
U -factor SHGC
Exterior Shading
Status
Verified
Existing
Condition
3x3 altered .30-.29
N Wall ex (Right -0)
-
- 1
9.0
0.30
0.29
'Insect Screen (default)
Altered
N/A
6x3 altered .30-.29
N Wall ex (Right -0)
-
- 1
18.0
0.30
0.29
Insect Screen (default)
Altered
N/A
44 altered .30-.29
E Wall ex (Front -90)
-
- 1
16.0
0.30
0.29
Insect Screen (default)
Altered
N/A
-8x5 altered .30-.29
E Wall ex (Front -90)
-
- 1
40.0
0.30
0.29
Insect Screen (default)
Altered
N/A
44 altered .30-.29 2
S Wall ex (Left -180)
- -
- - 1
16.0
0.30
0.29
Insect Screen (default)
Altered
N/A
4x5 altered .30-.29
S Wall ex (Left -180)
-
-- 1
20.0
0.30
0.29
Insect Screen (default)
Altered
N/A
6x3 altered .30-.29 2
W Wall ex (Back -270)
-
- 1
18.0
0.30
0.29
Insect Screen (default)
Altered
N/A
8x6.7 altered .30-.29
W Wall ex (Back -270)
-
- 1
53.6
0.30
0.29
Insect Screen (default)
Altered
N/A
3x1 altered .30-.29
W Wall ex (Back -270)
-
-- 1
3.0
0.30
0.29
Insect Screen (default)
Altered
N/A
3x1 altered .329 2
0-.
W Wall ex (Back -270)
--
- 1
3.0
0.30
0.29
Insect Screen (default)
Altered
N/A
6x4 altered .30-.29
W Wall ex (Back -270)
-
- 1
24.0
0.30
1 0.29
Insect Screen (default)
Altered
N/A
Registration Number: 215-A0094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-1015:23:08
CERTIF OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE �OD CF1PF-01
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015 Page 4 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xmi
DOORS
01 02 03 04 05 06
Name Side of Building Area (W) U -factor Status Verified Existing Condition
5x6.7 ex E Wall ex 33.5 0.50 Existing No
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
06
07
07
08
09
Distribution Type
Total Cavity
Winter Design
Solar
Fraction
(°/a)
Construction Name
Surface Type
Construction Type
Framing
R -value
U -value
Assembly Layers
Annual
Perimeter
No
Carpeted
• Cavity/ Frame: no insul. / 2x4 Top Chrd
Name
Zone
Area (ft)
2x4 Top Chord of Roof Truss @ 24
Edge Insul. R -value
Fraction
Roof Deck: Wood Siding/sheathing/decking
Attic RoofResidence
Attic Roofs
Wood Framed Ceiling
in. O.C.
none
0.644
Roofing: Light Roof (Asphalt Shingle)
0.8
No
Existing
No
• Inside Finish: Gypsum Board
Ceilings (below
Cavity/Frame: R-9.1 /2x4
Default 1978 to present
attic)
Wood Framed Ceiling
2x4 @ 16 in. O.C.
R 11
0.083
Over Floor Joists: R-1.9 insult
• Inside Finish: Gypsum Board
• Cavity/Frame: R -13/2x4
R-13 Wall
Exterior Walls
Wood Framed Wall
2z4�@ 1�6 in O C:�
� R 134
0.095
• Exterior Finish: Wood
Siding/sheathing/decking
W'! a --ata k Y •€ E!"--'-")iiP Rk -1 li fs- M M
SLAB FLOORS
too 4 A A 1 Aws a
01
N.02 I;
03 S
Fo4R
0 V P5.
06
07
08
09
Distribution Type
Water Heater
Number of
Heaters
Solar
Fraction
(°/a)
Status
Verified Existing
Condition
DHW Sys 1
DHW
Verified
DHW Heater 1
1
Annual
Perimeter
No
Carpeted
Existing
Name
Zone
Area (ft)
(ft)
Edge Insul. R -value
Fraction
Heated
. Status
Condition
Covered Slab ex
Residence
1836
180
None
0.8
No
Existing
No
BUILDING ENVELOPE - HERS VERIFICATION
01 02 03 04
Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage ACH @ 50 Pa
Not Required Not Required Not Required —
WATER HEATING SYSTEMS
01
02
03
04
05
06
07
08
Name
System Type
Distribution Type
Water Heater
Number of
Heaters
Solar
Fraction
(°/a)
Status
Verified Existing
Condition
DHW Sys 1
DHW
Pipe Insulation, All Lines
DHW Heater 1
1
Annual
Existing
No
Registration Number: 215-A0094659A-000000000-0000
CA Building Energy Efficiency Standards - 2013 Residential Compliance
Registration Date/Time: 2015-04-10 15:30:25
Report Version - CF1R-04012015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-04-10 15:23:08
CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE JOD
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
CFIPF-01
Page 5 of 7
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50
0.61 EF
40000-Btu/hr
0
0
WATER HEATING - HERS VERIFICATION
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation with
Manual Control
Recirculation with
Sensor Control
DHW Sys 1
n/a
n/a
n/a
n/a
n/a
n/a
SPACE CONDITIONING SYSTEMS
01
02
03
04
05
06
07
08
09
Multi -speed
Heating System
Cooling System
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Name
System Type
NameUucted�Na
a ct d�
Distribution
"System
Fan
_Systems
Floor Area
Served
Status
Verified Existing
Condition
HVAC1
Other Heating and
Heating'Cooling°`
Componen l
Yes
$
Air°Distribution?
System 1
HVAC Fan
1836
Existing
No
Cooling System
�Componnen
HVAC -HEATING SYSTEMS
01 02 03
Name Type Efficiency
Heating Component 1 CntrlFurnace - Fuel -fired central furnace 80 AFUE
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
Efficiency
Multi -speed
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Cooling Component 1
SplitAirCond - Split air conditioning
10.42
12
No
No
N/A
system
Registration -Number: 215-A0094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-1015:23:08
CERTIFO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE *OD CFOF-01
Project Name: Remodel Residence Calculation Datefrime: 15:22, Fri, Apr 10, 2015 Page 6 of 7
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xmi
HVAC.- DISTRIBUTION SYSTEMS t
01
02
03
04'
05
06
07
08
09
��, 10
Insulation
Supply Duct
Return Duct.
Verified Existing
HERS
Name
Type
Duct Leakage
R -value
Location
Location
Bypass Duct
Status
Condition
Verification
Air Distribution
Ducts located in attic
Existing (not
4.2
Attic
Attic
None
Existing
No
N/A
System"!
specified)
IAQ (Indoor Air Quality) FANS
01 02 03 04 05
Name IAQ CFM - IAQ Fan Type' IAQ Recovery Effectiveness(%) HERS Verification
SFam IAQVentRpt 0 Default 0 Not Required
COOLING VENTILATION
f
01
�_ " 02 03 04
Name
Cooling Vent CFM Cooling Vent Watts/CFM Number of Fans
WH Fan 1 • .. 4
-, _ -. — 61 0.52459 1
Registration Number: 215-Ao094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710
HERS Provider: CaICERTS inc.
Report Generated at: 2015-04-1015:23:08
CERTIF* OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE JOD
Project Name: Remodel Residence Calculation Date/Time: 15:22, Fri, Apr 10, 2015
Calculation Description: Title 24 Analysis Input File Name: Res Remodel -52 565 Avenida Vallejo-LQ-Lowes-15.xml
CFF -01
Page 7 of 7
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Tim Scott
Company:
Signature Dater
Scott Design and Title 24, Inc.
2015-04-10 15:30:25
Address:
CEA/HERS Certification Identification (if applicable):
77085 Michigan Drive
City/State/Zip: -
Phone:
Palm Desert, CA 92211
(760) 200-4780
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to -the enforcement,agenc_,for approv with thi building permit application. ,
Responsible Designer Name:. ;:
,Responsible Designer Signature:
%urv.�cai
Tim Scott f
Company:Fi
Date Signed-
2015-04-1015: 0:25
Scott Design and Title 24, Inc.
Address:
License:
.77085 Michigan Drive
na
City/State/Zip:
Phone:
Palm Desert, CA 92211
(760) 200-4780
Digitally signed by CaICERTS. This digital signature is provided in order to secure the content of this registered document, and in no way implies Registration Provider responsibility for the accuracy of the
information.
Registration Number: 215-A0094659A-000000000-0000 Registration Date/Time: 2015-04-10 15:30:25 HERS Provider: CaICERTS inc.
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-10 15:23:08