The URL can be used to link to this page

06-3880 (SFD)P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Application Number: 06-00003880 Property Address: 80225 VIA CAPRI APN: 772-440-056- - - Application description: DWELLING SINGLE FAMILY DETACHED Property Zoning: LOW DENSITY RESIDENTIAL Application valuation: 449348 Applicant: Architect or Engineer: ----------------- LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed.under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is_ in full force and effect. - License Cass: B /�) License No.: 671203 Date: Contractor: ' tf ' I CD OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: :1 _) I, i s owner of the property, or my employees with wages as their sole compensation, will do the work, and _,'the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The' -'' Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are -not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). ' (_ I I, as owner of -the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors', State License Law does not apply to an owner of property who builds or Improves thereon, -and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). am exempt under Sec. B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there'is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPERMIT Owner: MR. & MRS. DAVID A: HOYT. 1174 BANGOR STREET SAN DIEGO, CA 92106 VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: - 1/23/07 D ° Contractor: PIERCE,.CORPORATION, ANDRE LAN 4 2007 P.O. BOX 3420 PALM DESERT, CA 92261 CITY OF LA QUINTI (760)346-3228 FINANCE DEPT. Lic..No.: 671203 - ---------------------------------------------— WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one' of the following declarations: - I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is - issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: ' Carrier STATE FUND, Policy Number 1828004-2006 I certify that, in the performance of the work for which this -permit is issued, I shall not employ any ' person in any manner so as to become subject to the workers' compensation laws of California, ' and agree that, if I should become subject to the workers' compensation provisions of Section �f�.1y 700 of the Labor Code,{,rI forth comp) with those provisions. Date: I !�1 Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS 1$100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed*under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta; its officers, agents and employees for any act or omission related td the work being performed under or following issuance of this *permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced - within 180 days from date of issUan69 of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and count ordinances and state laws relating tobuildi onstruction, a hereby' uthorize representatives of this oun y o enter upon the above-mentioned propert,'yp��or i pecti poses. Date) � Signature (Applicant or Agent! � • /, y 4 ,I Application Number 06-00003880 ------ Structure Information 5,030SF DWELLING/V-NR/RES-3/CLASS A -FR ------ Other• struct info . . . CODE EDITION 2001/2005 # BEDROOMS 4.00 FIRE SPRINKLERS NO GARAGE SQ FTG 955.00 PATIO SQ FTG 1820.00 NUMBER OF UNITS 1.00 1ST FLOOR SQUARE FOOTAGE 4536.00 2ND FLOOR SQUARE FOOTAGE 494.00 Permit BUILDING.PERMIT Additional desc . Permit.Fee .. 1864.50 Plan Check Fee 1211.93 Issue Date . . . . Valuation 449348• Expiration Date 7/22/07 Qty Unit Charge Per Extension BASE FEE 639.50 .350.00 3.5000 THOU BLDG 100,001-500,000 1225.00 Permit ELEC-NEW RESIDENTIAL Additional desc . Permit Fee 225.15 Plan Check•Fee 56.29 Issue Date Valuation . . . . 0 Expiration Date 7/22/07 Qty Unit Charge Per- Extension BASE FEE 15.00 5030.00 .0350 ELEC NEW RES - 1 OR 2 FAMILY 176.05 955.00 .0200 ELEC GARAGE OR -NON-RESIDENTIAL . 19.10 1.00 15.0000 EA ELEC TEMPORARY POWER POLE 15.0'0 Permit GRADING PERMIT Additional desc . Permit Fee . . . . 15.00 Plan Check Fee .. .00 Issue Date Valuation 0 Expiration Date 7/22/07 Qty Unit Charge Per Extension BASE -FEE. 15.00 Permit MECHANICAL Additional desc . LQPERMIT r Application Number . . . . . 06-00003880. Permit ... . . . . MECHANICAL Permit Fee 205.00 Plan Check Fee '51.25 'Issue Date Valuation 0 ..Expiration Date 7/22/07 Qty Unit Charge Per Extension BASE FEE 15.00 5.00 9.0000 EA MECH FURNACE <=100K 45.00 1.00 11.0000 EA MECH FURNACE.>100K 11.00 1.00 4.5000 EA MECH VENT INST/ DUCT ALT. 4.50 2.00 9.0000 EA MECH B/C <=3HP/100K BTU 18.00 4.00 16.5000 EA MECH B/C >3-15HP/>100K-500KBTU 66.00 5.00 6.5000 EA MECH VENT FAN 32750 2.00 6.5000 EA MECH EXHAUST HOOD 13.00 Permit PLUMBING Additional desc Permit Fee 276.00 Plan Check Fee 69.00 Issue Date . . . . Valuation 0 Expiration Date.. 7/22/07 Qty Unit Charge Per Extension BASE FEE 15.00 29.00 6.0000 EA PLB FIXTURE 174.00 1.00 15.0000 EA PLB BUILDING SEWER 15'.00 2.00 6.0000 EA PLB ROOF DRAIN 12..00 2.00 7.5000 EA PLB WATER HEATER/VENT 15.00 1.00 3.0000 EA PLB WATER INST%ALT/REP 3.00 1.00 9.0000 EA PLB LAWN SPRINKLER SYSTEM 9.00 4.00 3.0000 EA PLB GAS PIPE 1-4 OUTLETS 12.00 8.00 7500 EA PLB GAS PIPE >=5 6.00 1.00 15.0000 EA PLB GAS METER 15.00 ------------------------------- Special Notes and Comments 5,030SF DWELLING/V-NR/RES-3/CLASS A -FR. THIS PERMIT DOES NOT INCLUDE BLOCKWALLS, POOL AND SPA, OR DRIVEWAY APPROACH. January 22, 2007 4:56:22.PM AORTEGA -------------------------- Other Fees -------------------------------------- ART IN,PUBLIC PLACES -RES. -----=------ 623.37 DIF COMMUNITY CENTERS -RES 7.4'.00 DIF CIVIC -CENTER- - RES 995:.00 ENERGY REVIEW FEE • 1'2.1.19 DIF FIRE PROTECTION -RES 140.00 GRADING. PLAN CHECK FEE .00 DIF LIBRARIES - RES 355.00 LQPERMIT Application Number 06-00003880 ----------------------------------------------- Other Fees . . . . . . . DIF PARK MAINT FAC - RES 22.00 DIF PARKS/REC - RES 892.00 STRONG MOTION (SMI) - RES 44.93 DIF STREET MAINT FAC -RES ' 67.00 DIF TRANSPORTATION - RES 1930.00 Fee summary Charged Paid Credited Due -- Permit Fee Total° ---------- 2585.65 -------------- ----- - ---------- .00 .00 2585.65 Plan Check Total 1388.47 500.00 .00 8.8.8.47 Other Fee Total 5264.49 00 .00 5264.49 Grand.Total 9238.61 500.00 .00 8738.61 # #Ciety Permit # I ok- . of La QuInt'a Building 8r -Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 p, op Building Permit Application and Tracking Sheetk4Ne v� Hrq Project Address: 190 - 72t,� VIA 0AVr-1 A. P. Number: 7U:440 - Owner's Name: PAVIV 1401T Address: t 1 -74 o P_ 5T Legal Description: L,0112,V-L Contractor: ANW-EW 171GPX,'_F CONST city, ST, zip: SA N 21%6, CA 0 6 Telephone:29- 2?Z - 7&2:j Address: 44$5 wo o xv . Project Description: City, ST, Zip: 17 jh(,M _pr -,5 &T. c., - R 226 0 Telephone: Pjtw SINCiLt-FIAMILY State Lic. # City Lic. #.. Arch., Engr.,- Designer - WN Address: cmis, s: -r: 5mrl_ 1o4 City., ST, Zip: 12A LM vr__5 <A '- I An,,w Telephone: IbO-5765-171 State Lie. #: C-- ((. . .. . . . . . .Deg 15 Construction Type: V Occupancy: JZ_ U Project type (circle one): Add'n Alter Repair Demo Name of Contact Person: MArfZ-1-- 5Tjs: -T4-7-. 11 Sq. 179051 #stoe7 Stories: — _Ti_Y_Zt_: I Telephone# of Contact Person: 7 5(o87 -1-71 Estimated Value of Project: DAVID WA 346-327-8 APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Reqld Recld TRACKING PERMIT FEES 21 Plan Sets Plan Check submitted 1112- Item Amount' TStructural Cafes. Reviewed, ready for corrections Plan Check Deposit Truss Cafes. Called Contact Person Abi Plan Check Balance. Title 24 Cafes. Plans picked up 111e11*1 Construction Flood plain plan Plans resubmitted Mechanical Grading plan 211 Review, ready r corrcctio�r ue 11 �w Electrical Subcontactor List Called CofitactPerson-51 1101 Plumbing Grant Deed Plans picked u . p S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- I 3rd Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks.,kppr Date of permit issue School Fees Total Permit Fees /1/02P(10 vctl 19UE7: li 7 Rfc" CU5 7-.,-, 11cA vu e- : / / i -j u ROO v Bin # City of La Quinta Building U Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # do Project Address: 90-995 q1A 441,191Owner's Name: IV C4 A. P. Number: Address:1114 p Legal Description: Contractor: kiN�W City, ST, Zip: . /� �(4 Telephone: Addreas:1wip Project Description: city, Telephone: 110 State Lic. # : 00 Arch., Engr., Designer: O t.* City Lic. #: 0 S Address: 41.89 City, ST, Zip -&g Telephone: 6D I�IIZ State Lic. #: Q At& Name of Contact Person: am9M Construction Type: YP • Occu anc P Y: Project type (circle one): New Add'n Alter Repair Demo Sq. Ft.: # Stories: # Units: Telephone # of Contact -Person: $ x b Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Recd TRACKING. PERMIT FEES Plan Sets Plan Check submitted 5 Item Amount Structural Calcs. Reviewed, ready f corrections 2—f Plan Check Deposit Truss Calcs. Called Contact Person 15( Plan Check Balance Energy Calcs. Plans picked up fr�� Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2nd Review, ready for correction i ue Electrical Subcontactor List Called Contact Person Plumbing Grant Deed Plans. picked upILL S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- '"' Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue School Fees A _ A !�l � M W r0L . (qb slz� fu,5 � 0,6 � �vn-'ac� Io1� To 1 Permit Fees SRW Z Coachella Valley Unified School District 83-733 Avenue 55,-Therinal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVEL ONE AMOUNT: LEVEL TWO AMOUNT: MITIGATION AMOUNT: COMMAND. AMOUNT: DATE: RECEIPT: CHECK #: INITIALS: CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Name: Residence is at the Hideaway Owner's Name: David Hoyt Project Address: 80-225 Via Capri La Quinta, CA Project Description: 1 SFD Date:. January 24, 2007 Phone No. 346-3228 APN: 772-440-056 Tract #: Lot #'s: Type of Development: Residential RX Commercial Industrial Total Square Feet of Building Area: 5,030 sq. ft. Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: January 24, 2007 Signature: SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code 17620 Number of Sq.Ft. Amount per Sq.Ft. Amount Collected Gov. Code 65995 5,030 $3.75 $18,862.50 Building Permit Application Completed: Yes/No Project Agreement Existing Approval Prior to 1/1/87 No e By: Carey M. Carlson, Asst. Supt., Business Services Certificate issued by: Elvira Mattson, Office Technician Signature: Not Subject to Fee Requirement NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. At such time as this Certificate expires, if a building permit has not been issued for the project that is the subject of this Certificate, the owner will be reimbursed all fees that were paid to obtain this Certificate of Compliance. NI V:e/mydocs/devfees/certificate of compliance form tablesTO USE.doe 1/16/03 T �Rpr 27 06 06:52p Dave and Susan Hoyt WHEN RECORDED MAII. TO: Mr. & Mrs. David A. Hoyt 1174 Bangor Street San Diego, CA 92106 MAIL TAX STATEMENT TO: SAME AS ABOVE (619) 226-7674 p.2 DOC a Z�,-9PJ5773 11/17/2003 08-:00A Fee:16.00 Page 1 of 4 Doc T Tax Paid Recorded in Official Records County of Riverside AGary L. Orso ssessor County Clerk 6 Recorder 1111111 !l111111l1111N1 !1 I11111l11111lIIllilll111 M S U PAGE Ste, DA POOR NOCOR. Shy � MISC. L __-•- •NCMG COPY LONG REFUND EXAM DOCUMENT.TRANSFER TAX $ 601.15 XX Computed on the consideration or value of property conveyed; OR KW Computed on the consideration or value less liens or encumbrances remaining at the time of sale. ASignature of Declarant or Agent determining tax - Firm Name Ob -10 GRANT DEED FOR A VALUABLE CONSIDERATION, receipt of which is hereby acknowledged, ND LA QUINTA PARTNERS, LLC, a Delaware limited liability company ("Grantor"), hereby GRANT(S)to David A. Hoyt and Susan M. Hoyt, Trustees of THE HOYT FAMILY TRUST Dateed January 18, 2001 ("Grantee'), the real property located in the City of La Quinta, County of Riverside, State of California, described as: See Legal Description attached hereto and incorporated herein as Exhibit -X1. SUBJECT TO all matters of record including, without limitation, the covenants and agreements described in Exhibit "A" attached hereto. Dated: July 10, 2003 ND LA QUINTA PARTNERS, LLC, a Delaware limited liability company By: Nationwide Realty Investors, Ltd. an Ohio limite liability comp y its managin- ember By: J`osefii L. Arenson Authorized Representative 1`. 9pr 27 06 06:52p Dave and Susan Hoyt [619) 226-7674 p.3 STATE OF California ) ) ss. COUNTY OF Riverside ) On _ - (,, 1p , 2003, before me, the undersigned, a notary public in and for said State, pe sonally appeared Joseph L. Arenson, authorized representative of Nationwide Realty Investors, Ltd., (whose identity was proved to me on the basis of satisfactory evidence) to be the person whose name is subscribed to the within instrument and acknowledged to me that he executed the same in his authorized capacity, and that by his signature on the instrument the person, or the entity upon behalf of which the person acted, executed the instrument. WITNESS MY HAND AND OFFICIAL SEAL. Conn(e Concetfo y COMM. #1417229 o NOTARY PUBLIC - CALIFORNIA w RIVERSIDE COUMY r] � [SEAL] ' MY commkom E-qtres mw T t, tom dv� v Signature i�iwmmm�m�m�urt� , ro=tl,,, From: Brook Marshall [mailto:bmarshall@drminternet.com] Sent: Friday, December 08, 2006 4:52 PM To: Allison Sharpe; johnkrieg2003@yahoo.com; mstite@gordonross.net; Gerry Tarsitano Subject: 22-23 December 8, 2006 GordonRoss 42829 Cook Street, Suite 104 Palm Desert, CA 92260 RE: Hoyt/Final Working Drawings #2 Lot 22/23 at 80225 Via Capri Dear GordonRoss: The Hideaway Design Review Committee met to review the Revised Final Working Drawings for Lot 22/23. The project is being granted a conditional approval so plans may be submitted to the City of La Quinta. Additionally, a Pre -Construction Meeting may be held at the site so that temporary facilities may be brought on site and the vegetation can be removed. However, construction may not commence until a revised set of plans is submitted for review showing corrections/clarifications to the items listed below. 1. It appears there is a column, shown on the Grading plan at the SW corner, that is higher than the existing wall. Please clarify. 2. The proposed pool fountain is located on the rear property line which means construction will occur off property. The wall (tile) will be 30" high with no planting to soften. Please clarify and obtain approval from the golf course. 3. Lot 24/25 (South Coast Architects with Peter Jacobs) should be indicated on the plans for review as the plan is in design review as well. This information was on the landscape plan but not on the grading plan. 4. Any exposed pool materials will need to be submitted for review, and approval. There were no specifications provide on sheet L1 (notes say "ceramic tile to be selected by owner"). 5. A Variance request will be required for the pool setback that is currently being proposed. Grading information will be needed as well. Variance request received however the Golf Course Agronomist has not provided written confirmation/acceptance. We look forward to receiving your revised submittal. Please contact Brook Marshall at (760) 219-8057 or by email at Brookgdc.rr.com with any questions or to schedule your Pre -Construction Meeting at the lot. Sincerely, Hideaway Design Review Committee cc: John Krieg Certificate of Occupancy. G� OF'T1Building.f & Safety Department This Certificate is issued pursuant to the requirements of Section 109 of the California Building Code, certifying that, at the time of issuance, this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/or use. BUILDING ADDRESS: 80-225 VIA CAPRI Use classification: SINGLE FAMILY DWELLING Building Permit No.: 06-3880 Occupancy Group: R-3 Type of Construction: VN Land Use Zone: RL Owner of Building: MR. & MRS. DAVID HOYT Building Official POST IN A Address: 1174 BANGOR ST. City, ST, ZIP: SAN DIEGO, CA 92106 By: STEVE TRAXEL Date: OCTOBER 6, 2008 TITLE 24 REPORT Title 24 Report for: Hoyt Residence 80-225 Via Capri Lot ##22-23 La Quinta, CA 92253 Project Designer: Gordon Ross 42-829 Cook Street, Suite 104 Palm Desert, CA 92260 (760) 568-1712 Report Prepared By: CJ McFadden BREEZE AIR CONDITIONING 75-145 ST. CHARLES PLACE PALM DESERT, CA 92211 (760) 346-0855 CITY OF LA QUINTA Job Number: BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION onTEeY Date: 1/10/2007. The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: User Number. 3665 Ya 1 I TABLE OF CONTENTS I Cover Page Table of Contents Form CF -1 R Certificate of Compliance Form MF -1 R Mandatory Measures Summary Form WS -5R Residential Kitchen Lighting HVAC System Heating and Cooling Loads Summary Room Load Summary Room Heating Peak Loads Room Cooling Peak Loads Manufacturer's Specifications 1. 2 3 9 11 12 15 18 21 26 EnergyPro 4.3 by EnergySoft Job Number: User Number. 3665 Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R _H.o y_t _ R e. s. ide. n ce 4,546 ft2 11101 Q07 Project Title _80225 Via_Cap_rj_Lot#222.3-La_Q.u.inta ft2 Raised Floor Area: Date Project Address Slab on Grade Area: 4,052 Building Permit # Mr, 13.7 (760) 346-0855 Number of Dwelling Units: _BREEZE-AMR-CONDITJ Documentation Author -0069_ R-21 _R=0_0_ -270 90 Telephone Plan Check/Date _Energ_yPlo 0025_-EZ3.8_ _R=0..0_ -3.49 Q 15 R -91 -R--0-0- 45 9.0 Field Check/Date Compliance Method Wall_ Wood- 668_ Climate Zone Wall- Wood- -966--O-Q69- TDV Standard Proposed Compliance Root Wood_ 494 (! Btu/sf-yr) Design Design Margin Mall -Wood --70-0-0-69- Space Heating 3.34 3.56 -0.22 Wall- Wood- 1.02 Space Cooling 68.96 62.54 6.41 ZONE -#3 Fans 9.83 10.49 -0.65 Newt Domestic Hot Water 5.32 5.99 -0.67 Pumps 0.00 0.00 0.00 ZONEA3 Totals 87.45 82.58 4.87 Percent better than Standard: 5.6% Building Type: [-X] Single Family ❑ Multi Family Building Front Orientation Fuel Type: Fenestration: ❑ Addition ❑ Existing + Add/Alt (NW) 315 deg Natural Gas Area: 1,051 ft 2 Avg. U: 0.36 Ratio: 23.1% Avg. SHGC: 0.27 BUILDING ZONE INFORMATION Zone Name Floor Area Volume Total Conditioned Floor Area: 4,546 ft2 Existing Floor Area: n/a ft2 Raised Floor Area: 0 ft2 Slab on Grade Area: 4,052 ft2 Average Ceiling Height: 13.7 ft Number of Dwelling Units: 1.00 -0069_ R-21 _R=0_0_ -270 90 Number of Stories: 2 # of Thermostat Vent Units Zone Type Type Hgt. Area J±VA-CA1 A5] 11412 -0-91 Conditioned- -Setback- 8 -n/a -H-VA-C--#2A-2B-&-2 C 3 t0J X6,515 _0_6.8_ --Gonditioned_ Setback- 8 -nla _HVAC E3 494 4 3.47 0.9J_ -Conditioned_ Setback- 8 --nLa OPAQUE SURFACES Insulation Act. Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Roof- Wood- 951-0.025_ _LR38_ -J:;-'O-O- _345_ 0 Wall_ Wood_ 72 -0-069---R--Z1--RU- 0 90. Wall_ Wood_53.4_ _0...0.6.9 R-21 _R=0..0_ ----4-5_ 9.0 Wall- Wood- 84 _0_0.69_-R21_R=0._0_9.0.90 Wall_ Wood_ _220_ _006.9_ R -21 _R=00 ---135--90 Wall_ Wood_ 470_ -0-06a R -21__R 0..0_-225 9.0 Wall -Wood- 84_ -0069_ R-21 _R=0_0_ -270 90 Wall_ Wood_ 351 _00.69 _R210`0.0_ _3159.0. Root Wood_ _240.7- 0025_-EZ3.8_ _R=0..0_ -3.49 Q Wall_ Wood_x.,2.4.8.0069 R -91 -R--0-0- 45 9.0 Wall- Wood- 67.0.0069_ _R-210`0.0_ x_35 90 Wall_ Wood- 668_ _0069_ _R210`0_0.5259.0 Wall- Wood- -966--O-Q69- R-91-R--0-0--3J-5-----9Q .DO.OL None 32.0_500. -None_ -2=0..0 -315_ 90 Root Wood_ 494 0_025 -R-3.8_ _R 0 0 -345 0 Wall- Wood_ _20.3_ 0.06.9 0-21 --R=0_.0 --A5-----9.0 Mall -Wood --70-0-0-69- -R2102=0_0_ x.35 9.0 Wall- Wood- X25_ _00.69.0210`0.0.925.90 Wall- Wood- 1.02 _0_0.6.9_ R_21 -RU-0- _315_-9.0 .Door None_ 2.4_ -0_5.0.0_ -None_ -R0.0- -3-1-5--90 Gains Condition Y / N Status JA IV Reference Location / Comments New _011A].8 ZONE-#J- ONE-#1New New- 0.9- ZONEJ#1 New _0.9=A6 ZONE#1 New _0.9JA6 ZONF #1 New 0.9=A6 ZONE #1 N.ew _0.91.6 ZONE #1 New 0.916 ZONE #1 New 0.91.6 ZONF #1 New 01_A1.8 ZONE #2 N.e.w 0.9.26 ZONE #2 New _091.6 ZONE #9 New 0.9=A6 ZONE #9 New -0.9- ZONEJt2 New 28-94 ZQNE #2 New _01--A18 ZONE -#3 New 0.9Ja6 ZONE #3 Newt _0.916 ZONE -3 New -0.916 ZONE #5 New _0.91.6 ZONEA3 New 28A4 ZONE -#3 I EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number. Page:3 of 26 1 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Hoyt Residence Project Title Date 1/10/2007 FENESTRATION SURFACES True Cond. Location/ # Tvpe Area U-Factorl SHGC2 Azm. Tilt Stat. Glazinq Type Comments _1- 2 Window_Rear (.SE) Window Rear (SE) _2.4_.0 48.0 -0.3.50-I.FRC _0...35 -NERC 3.35_ 0.350 NFRC 0_20 NFRC 135 _9.0_ New-Loew-enDb.LS.un140_(Eixed.)_(B2)_ZO.NEJL1 90 New Loewen Dbl Sun 140 Swngpr)_ ZONE #1 3 Window Rear (SE) 24.0 0.350 NFRC 0_36 NFRC 135 90 New CPAPJWDbl Sun 140 (Fixed) (g1)_ ZONE #1 4 Window Right (SW) 15.0 0.370 NFRC 0_29 NFRC 225 90 New Loewen Dbl Sun 140 (Csmnt) (G2) ZONE #1 5 Window Right (SW) 15.0 0.370 NFRC 0_29 NFRC 225 90 New Loewen Dbl Sun 140 (Csmnt)_(G1) ZONE #1 6 Window Right(SW) 0.76 6.3 0.370 NFRC 0_29 NFRC 225 90 New Loewen Dbl Sun 140 Csmnt)_(4.. ZONE #1 7 8 Wind Window Right (§W) 6.3 0- NERC 0.370 NFRC 0_29 NFRC 2 225 Q New 90 New D r1j40_(Csrnnt)_(_ZONE #1 IR Loewen Dbl Sun 140 (Csmnt) (15) ZONE #1 9 Window Left (NE)�1 .0 0.370 NFRC 0.29 NERC 5 90 New Loewen Dbl n 14 nt)_(-Q) ZONE #2 _1.0 11 12 WindQw Window Window Left Left Left (NE) 18.0 ("E 23.3 (NE) 3.7 0.370 NERC 0.29 NFRC35 0.370 NFRC 0_29 NFRC 0.350 NFRC 0_36 NFRC 45 45 90 New 90 New 90 New Loe_w_en Dbl Sun 140 (Csmnt)_(Fi1) ZONE #2 Loewen Dbl Sun 140 Csmnt)_(J11 ZONE #2 Loewen Dbl Sun 140 (Fixed) (C2) ZONE #2 A. 14 15 Window Left_(.N.E) Window Left (NE) Window Left (NE) 37 3.7 22.7 9350-N.ERC 0.36 -NERC. 0.350 NFRC 0_36 NFRC 0.350 NFRC 0_36 NFRC 4.5_ 45 45 90 LLaw 90 New 90 New Loewen- bLSunJAO_(.Eixed.)-(_C2)__ZON.E-#2 Loewen Dbl Sun 140 Fixed _(Q2_ ZONE #2 Loewen Dbl Sun 140 (Fixed) (Cl) ZONE #2 16 17 Window Window Left Left (NE) U 48.0 22.7 0.350 NFRC 0_20 NFRC 0.350 NFRC 0_36 _NERC 45 45 90 New 90 New Loewen Dbl Sun 140 (Swnglr_ ZONE #2 T� n Dbl Sun 140 Fixed _(C2)_ ZONE #2 18 Window Left (NE) 23.3 0.370 NFRC 0_29 NFRC 45 90 New Loewen Dbl Sun 140 (Csmnt) ( 1 ZONE #2 19 Window Rear (SE) 18.0 0.370 NFRC 0.29 NFRC 135 92 New Loewen Dbl Sun 140 ( mnt)_(E11) ZONE #2 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1166. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Tvpe_ SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 Bug Screen 0.76 2 Bug Screen 0.76 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 9 Bug Screen 0.76 10 Bug Screen 0.76 11 � Screen 0.76 12 Bug Screen 0.76 13 Bug Screen 0.76 14 Bug Screen 0.76 15 Bug Screen 0.76 16 Bug Screen 0.76 17 Bug Screen 0.76 18 Bug Screen 0.76 19 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Type (sf) (in.) Cap. Cond. R -Val. Condition Location/ JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Slab Perimeter 165 None No Insulation 26-A1 New ZONE #1 Slab Perimeter 387 None No Insulation 26-A1 New ZONE #2 Run Initiation Time: 01/10/07 15:15:32 Run Code: 1168463732 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number. Page:4 of 26 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Hoyt Residence 1/10/2007 Project Title Date FENESTRATION SURFACES # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 20 Bug Screen 0.76 True Cond. Location/ # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Comments .20. Window -Rear -(SE) 40._0_ -0-37-0 -NERC 029 NFRC x_35_ _90_ New Loewen_Dbl-S.un14A_(.Csmnt)_(.E])ZO.N.F #2 21 Window Rear (SE) 180.0 0.360 NFRC 0_33 NFRC 135 90 New Loewen HP1 (SGD) (104D) ZONE #2 22 Window Rear (SE) 5.0 0.350 NFRC 0_36 NFRC 135 90 New Loewen Dbl Sun 140 (Fixed)_(C2)_ ZONE #2 23 Window Rear (SE) 5.0 0.350 NFRC 0_36 NFRC 135 90 New Loewen Dbl Sun 140 (Fixed) (C2) ZONE #2 24 Window Rear (SE) 5.0 0.350 NFRC 0_36 NFRC 135 90 New Loewen Dbl Sun 140 (Fixed) (C2)_ ZONE #2 25 Window Right (SW) 41.0 0.370 NFRC 0_29 NFRC 225 90 New Loewen Dbl Sun 140 (Csmnt)_(EJ1 ZONE #2 26 Windowight (SW) 6 _9 NFRC 0.29 NFRC 225 9Q LJ�Loewen Dbl Sun 140 (CS n�nt)_{L�) ZONE #2 27 Window Right (SW) 48.0 0.350 NFRC 0_20 NFRC 225 90 New Loewen Dbl Sun 140 (SwngDr) ZONE #2 28 WLndow fight_() 40370 NFRC_ 0.29 NFRC225 _ -90 New Dbl Sun 140 ( mnt)_(QZ)ZONE #2 2.9 Widow i ht { ) 4$4 0.3 0 NFRC 0-20 NFRC 225 90 New Loewen Dbl Sun 140 (SwnaDr)_ ZONE #2 30 Window Front (NW) 11.8 0.370 NFRC 0_29 NFRC 315 90 New l_)n Dbl Sun 140 (Csmnt)_(N1) ZONE #2 31 Window Front (NW) 5.0 0.350 NFRC 0_36 NFRC 315 90 New Loewen Dbl Sun 140 (Fixed) (C2)_ ZONE #2 32. Window Eront-(NW) 5..0- --0-a5-0-NFRC--0-3-6 _NFRC -315_ 90- New L, !v_en_DbLS.un140�Ei�ced.)_(_C2) ZONF #2 33 Window Front (NW) 5.0 0.350 NFRC 0_36 NFRC 315 90 New Loewen Dbl Sun 140 Fixed (C2)_ ZONE #2 34 Window Front (NW) 48.0 0.350 NFRC 0_20 NFRC 315 90 New Loewen Dbl Sun 140 Swng r ZONE #2 35 Window Front (NW) 48.0 0.350 NFRC 0_20 NFRC 315 90 New [ Dbl Sun 140 Swn Dr) #2 36 Window Front (NW) 48.0 0.350 NFRC 0_20 NFRC 315 90 New Dbl Sun 140 (Stang jr ZONE #2 37 Window Front (NW) 24.0 0.350 NFRC 0_20 NFRC 315 90 New [fin Dbl Sun 140 Swn pjr _ ZONE #2 33. Window Left (NE) 8.0 0.370 NFRC0.29 NFRC 4590 New WMn Dbl Sun 140 (Csmnt)_(I<1) ZONE #3 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 20 Bug Screen 0.76 21 Bug Screen 0.76 9.0 20.0 10.0 0.1 10.0 10.0 22 Bug Screen 0.76 23 Bug Screen 0.76 24 Bug Screen 0.76 25 Bug Screen 0.76 26 Bug Screen 0.76 27 Buq Screen 0.76 28 Bua Screen 29 Bug Screen 30 Bug Screen Ti Bug Screen 32 Bug Screen 33 Bug Screen 34 'Bug Screen 35 Bug Screen 36 Bug Screen 37 Bug Screen 38 Bug Screen 0.76 0.76 8.0 6.0 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick.Heat Inside Tvr)e (sf) (in.) Car). Cond. R -Val. 10.0 0.1 10.0 10.0 JA IV Reference Condition Location/ Status Comments PERIMETER LOSSES Type Length R -Val. Insulation Location Condition JA IV Reference Status Location/ Comments Run Initiation Time: 01/10/0715:15:32 Run Code: 1168463732 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number. Page:5 of 26 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Hoyt Residence Project Title Bug Screen 1/10/2007 Date FENESTRATION SURFACES # Type Area True U-Factorl SHGC2 Azm. Tilt Cond. Location/ Stat. Glazing Type Comments _3.9. Win.dow_Left_(NE) 0_ 0.370 -NRC 0..29 _NERC 45_ _9.0_New Loewen-Db.l_S.un-14.0-(CsmntMK2)ZONE-#3 40 Window Left (NE) 6.3 0.370 NFRC 0_29 NFRC 45 90 New Loewen Dbl Sun 140 Csmnt _(L1) ZONE #3 41 Window Rear (SE) 10.3 0.350 NFRC 0_36 NFRC 135 90 New Loewen Dbl Sun 140Fixed _(C2)_ ZONE #3 42 Window Rear (SE) 48.0 0.350 NFRC 0_20 NFRC 135 90 New Loewen Dbl Sun 140 (SwngDr) ZONE #3 43 Window Rear (SE) 10.3 0.350 NFRC 0_36 NFRC 135 90 New E Vgn Dbl Sun 140 Fixed _(C2)_ ZONE #3 44 Window Front (NW) 6.3 0.370 NFRC 0_29 NFRC 315 90 New Loewen Dbl Sun 140 (Csmnt)_(L2) ZONE #3 45 Window Front (NW) 6.3 0.370 NFRC 0.29NFRC 31.5 90 New Loewen Dbl Sun 140 (Csmnt)-(L3). ZONE #3 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1166. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LEA RExt. Dist. Len. Hgt. Dist. Len. Hgt. 39 Bug Screen 0.76 40 Buo Screen 0.76 41 Bug Screen 0.76 42 Bug Screen 0.76 43 Bug Screen 0.76 44 Bug Screen 0.76 45 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Type L Insulation R -Val. Location Condition Location/ JA IV Reference Status Comments Run Initiation Time: 01/10/07 15:15:32 Run Code: 1168463732 EnergyPro 4.3 by EnergySoft User Number. 3665 Job Number: Page:6 of 26 Certificate Of Compliance : Residential (Part 3 of 4) CF -1 R Hoyt Residence 1/10/2007 Project Title Date HVAC SYSTEMS Duct Condition Ducts Location R -Value Status Tested? Attic 4.2 New Heating Minimum Cooling Minimum Condition Thermostat Location Type Eff Type Eff Status Type HVAC -#1 Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC -#2A, 2B & 2C Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC -#3 Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC DISTRIBUTION Location Heating Cool HVAC -#1 Ducted Ducted HVAC -#2A, 2B & 2C Ducted Ducted HVAC -#3 Ducted Ducted Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. Duct Duct Condition Ducts Location R -Value Status Tested? Attic 4.2 New No Attic 4.2 New No Attic 4.2 New No WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input . Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext. Standard Gas 50 gal or Less Small Gas No Pipe Insulation 1 40,000 50 New 0.52 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (T_ Add 1/2" Control # HP Type In Plenum Outside Buried Insulation COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Name: Title/Firm: Gordon Ross Address: 42-829 Cook Street, Suite 104 Palm Desert, CA 92260 Telephone: (760) 568-1712 Lic. #: (signature) (date) Enforcement Agency Name: Title/Firm: Address: Telephone: (signature) (date) Documentation Author Name: CJ McFadden Title/Firm: BREEZE AIR CONDITIONING Address: 75-145 ST. CHARLES PLACE PALM DESERT, CA 92211 Telephone: 760 346-0855 (signature) J I (date) STAMP Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R Hoyt Residence 1/10/2007 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. IThe Roof "R-38 Roof' includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual. HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- Plan I Field approved HERS provider using cec approved testing anwor ventication metnods and must oe reported on the ci--arc installation certificate. Plan Field The HVAC System "HVAC -#1" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The Cooling System "PSA213D / PGC1 RA(3.5 ton) 13 SEER" includes credit for a 11.6 EER Condenser. A certified HERS rater mus field verify the installation of the correct Condenser. The HVAC System "HVAC -#2A, 2B & 2C" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The Cooling System "PSA2131) / PGC1 RA (5 Ton) 13 SEER" includes credit for a 11.6 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System "HVAC -#3" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The Cooling System "PSA2131) / PGC1 RA (2 Ton) 13 SEER" includes credit for a 11.9 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. i EnergyPro 4.3 by EnergySoft User Number. 3665 Job Number: Page:8 of 26 1 Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE - DESCRIPTION permit application documentation. N/A DESIGNER MENT Building Envelope Measures +§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ ❑ § 150(b): Loose fill insulation manufacturer's labeled R -Value: ❑ ❑ ❑ +§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not ❑ ❑X ❑ apply to exterior mass walls). *§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. 1. Masonry and factory -built fireplaces have: a. closable metal or glass door covering the entire opening of the firebox ❑ N ❑ b. outside air intake with damper and control, flue damper and control ❑ ❑X ❑ 2. No continuous burning gas pilot lights allowed. ❑ N ❑ § 150(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ permeance rate no greater than 2.0 perm/inch. § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include ❑ ❑ CF -6R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ Q ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain ❑ N 1-1Coefficient (SHGC), and infiltration certification. 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ IR ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ER ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ ❑ ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑X ❑ § 1500): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation ❑ ❑X ❑ having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ N ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire ❑ Q ❑ length of recirculating sections of hot water pipes shall be insulated to Table 150B. 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and ❑ Q ❑ indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, ❑ 0 ❑ and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page:9 of 26 5 Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - applicable. N/A DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ 2 ❑ 605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a mihumum installed level of R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ 2 ❑ sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. ❑ ❑ ❑ 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ 2 ❑ duct tapes unless such tape is used in combination with mastic and draw bands. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ 2 ❑ 4. Exhaust fan systems have back draft or automatic dampers. 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ 2 ❑ dampers. 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ 2 ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ ❑ ❑ 7. Flexible ducts cannot have porous inner cores. § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ ❑ ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. 2. System is installed with: a. At least 36" of pipe between filter and heater for future solar heating. ❑ ❑ ❑ b. Cover for outdoor pools or outdoor spas. ❑ ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ 2 ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria ❑ ❑ ❑ Lighting Measures § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ 2 ❑ 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ 2 ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ ❑X ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ 2 ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ ❑X ❑ controlled by an occupant sensor that complies with Section flg(d) that does not turn on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are ❑ ❑X ❑ certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ 2 ❑ same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8,or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 10 of 26 t Residential Kitchen Lighting Worksheet WS -5R Hoyt Residence 1/10/2007 Project Title Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. High Efficacy Luminaire Type High Efficacy? Watts Quantity Watts Other Watts (1) 26w Compact Fluorescent Triple 4 Pin Yes X No F 26.0 x 13 = 338 or (2) 2 ft Fluorescent T8 Elec Yes X1 No 1 25.0 x 7 = 175 or (2) 4 ft Fluorescent T8 Elec Yes X No 32.0 x 2 = 64 or 35w Low Voltage Halogen Yes No X 35.0 x 8 = or 280 50w Low Voltage Halogen Yes No X 50.0 x 1 = or 50 Yes No x = or Yes No x = or Yes No x = or Yes I No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes I No x = or Yes No x = or Yes No x = or YesNo x = or Yes No• x = or Total A: 577 B: 330 COMPLIES IF A >_ B YES ® NO ❑ EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Paae:11 of 26 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Hoyt Residence 1/10/2007 SYSTEM NAME' FLOOR AREA HVAC -#1 951 SYSTEM LOAD P-IEATING SYSTEM PSYCHROMETRICS (Airst 26.0 of 75.5 of Outside 71 cfm 78.2 of I J TEM PSYCHROMETRICS 11.0 / 77.6 of Outside Air 71 cfm 5 73.5/68.4 of Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent CFM Sensible TOTAL SYSTEM LOAD 1 22,792 2,635 32,813 HVAC EQUIPMENT SELECTION PSA2BD / PGCIRA(3.5 ton) 13 SEER 13,632 15,021 58,000 Total Adjusted System Output 13,632 15,021 58,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am ream Temperatures at Time of Heating Peak) 114.50F 114.5 of Supply Air Ducts Heating Coil Supply Fan OF 1400 cfm ROOMS e 80.0 of Return Air Ducts irstream Temperatures at Time of Cooling Peak) 75.4 / 69.1 of 66.3 / 65.6 of 66.3 / 65.6 of Supply Air Ducts Cooling Coil Supply Fan 67.7 / 66.1 of 1400 cfm 81.9% R.H. ROOMS 72.0 / 68.0 OF r]_L. .._ A:_ r%.._L_ ' EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number. 12 of 26 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Hoyt Residence 1/10/2007 SYSTEM NAME FLOOR AREA HVAC -#2A, 2B & 2C 3,101 26.0 OF Outside —�0 233 cfm 78.8 of 7r: R OF Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM ISensiblel Latent I CFM I Sensible 2,177 44,394 7,866 1,742 66,702 0 6,368 7,573 0 0 233 9,401 5,632 233 13,072 0 0 6,368 7,573 66,530 13,498 94,920 PSA213D / PGC1 RA (5 Ton) 13 SEER 144,483 0 258,000 Total Adjusted System Output 144 483 Ol 258,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am Heating Coil 0 Supply Fan 6000 cfm 117.2 of —� Supply Air Ducts 116.0 of ROOMS 80.0 of Return Air Ducts `S COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak) 111.0/77.6OF 74.5/60.4OF 51.8/50.7OF 51.8/50.7OF O Supply Air Ducts Outside Air 233 cfm Cooling Coil Supply Fan 52.8 / 51.2 of 6000 cfm 46.9% R.H. ROOMS 73.0/59.5 of 72.0/59.2OF Return Air Ducts I EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 13 of 26 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Hoyt Residence 1/10/2007 SYSTEM NAME FLOOR AREA HVAC -#3 494 SYSTEM LOAD Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM ISensiblel Latent I CFM I Sensible 13,427 2,79 12,555 PSA2BD / PGCIRA (2 Ton) 13 SEER 20,120 0 36,000 Total Adjusted System Output 20,120 ___JO 36,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am M (EATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) I 26.0°F 76.4 OF 118.70F 118.70F O4 Supply Air Ducts Outside Air 37 cfm Heating Coil Supply Fan 117.6 of 800 cfm ROOMS 80.0 of 78.9 of �% Return Air Ducts `{ [COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak) I 111.0/77.6 OF 75.3/61.0 OF 51.7/50.6 OF 51.7/50.6 OF O Supply Air Ducts Outside Air 37 cfm Cooling Coil Supply Fan 53.2 / 51.2 of 800 cfm 47.9% R.H. ROOMS 73.6/60.0 of 72.0 / 59.5 of �% Return Air Ducts ; I EnergyPro 4.3 by EnergySoft User Number. 3665 Job Number. Paae:14 of 26 1 ROOM LOAD SUMMARY PROJECT NAME Hot Residence DATE 1/10/2007 SYSTEM NAME HVAC -#1 FLOOR AREA 951 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE ZONE #1 Master Suite 1 3,423 15,500 2,967 3,423 15,500 2,967 676 23,512 PAGE TOTAL 1 3,423 15,500 2,967 676 23,512 TOTAL 1 3,423 15,500 2,967 676 23,512 EnergyPro By EnergySoft User Number: User Job Number: Page: 15 of 26 ROOM LOAD SUMMARY PROJECT NAME Hot Residence DATE 1/10/2007 SYSTEM NAME HVAC -#2A, 2B & 2C FLOOR AREA 3,101 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE ZONE #2 Living Area 1 2,177 44,394 7,866 2,177 44,394 7,866 1,742 66,702 PAGE TOTAL 1 2,177 44,394 7,866 1,742 667702 TOTAL 1 2,177 44,394 7,866 1,742 66,702 EnergyPro By EnergySoft User Number: User Job Number: Page:16 of 26 ROOM LOAD SUMMARY PROJECT NAME Hot Residence DATE 1/10/2007 SYSTEM NAME HVAC -#3 FLOOR AREA 494 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE ZONE #3 2nd Floor/ Guest Suite 2 1 465 9,287 1,926 465 9,287 1,926 213 8,533 PAGE TOTAL 1 465 9,287 1,926 213 8,533 TOTAL 1 465 9,287 1,926 213 8,533 EnergyPro By EnergySoft User Number. User Job Number: Page:17 of 26 ROOM HEATING PEAK LOADS Project Title Date Hovt Residence 11/10/2007 Room Information Design Conditions Room Name Master Suite Time of Peak Jan 12 am Floor Area 951 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 80 OF Conduction Area U -Value OT of Btu/hr 951.0 x x x x X x X X X X X x x x X x X x x x x x x x x x x x x x x x x x x x x x x 0.0250 x x x x X X x X x x x x X x x x x x x x x x x x x x x x x x x x x x x x x x x 54 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 1,284 72.0 0.0690 54 268 534.0 0.0690 54 1,990 84.0 0.0690 54 313 219.6 0.0690 54 818 24.0 0.3500 54 454 48.0 0.3500 54 907 24.0 0.3500 54 454 469,9 Q69 54 1751 15.0 0.3700 54 300 15.0 0.3700 3.00 6.3 0.3700 54 126 27.5 0.3700 54 549 6.3 0.3700 54= 126 84.0 0.0690 313 351.0 0.0690 54 1.308 pedmeter- 7--1 -6 5. -0- -0-7-3-0-0 50 Items shown with an asterisk (•) denote conduction through an interior surface to another room. Page Total: 17 764 Infiltration: [ 1.001 x 1.064 x 951 x Heigh x 0.526 / 60] x W = 5=748. Schedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 23,512 EnergyPro 4.3 by EnergySoft User Number. 3665 Job Number: Page: 18 of 26 ROOM HEATING PEAK LOADS Project Title Date Hoyt Residence 1/10/2007 Room Information Design Conditions Room Name Living Area Time of Peak Jan 12 am Floor Area 3,101 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 80 OF Conduction Area U -Value AT of Btu/hr R-38 Roof R-21 Wall Loewen-Dbl_Sun 1_40(_Csmnt)_(-Ga) Loewen Dbl Sun 140 Csmnt) U Loewen_Obl_S.un-140_(Csmnt)_(J 1_) Loewen Dbl Sun 140 (Fixed)_(C2) Loewen Dbl Sun 140 (F'xe )_(C2 Loewen Dbl Sun 140 Fixed C2 Loewen-DbLSun,_4.0_(Eixed.)_(C Loewen Dbl Sun 140 SwngDr 123A Loewen-D.bLSun-t40_(Eixed.)_(.C2. Loewen Db1 Sun 140 Csmnt R-21 Wall Loewen Dbl Sun 140 Csmnt)_(E1) Loewe n-Dbl_Sun14.0_(Csmnt)_(Et Lo ewe n -H P_1_(S G D.)_(104D.) Loewen-Dbl_SurU_4.0_(Eixed.).(C2 Loewen Dbl Sun 140 (Fixed)_L- Loewen Dbl Sun 140 Fixed)_(C2) t2R2LWa11 Loewen_Db.LSun-1_40_(Csmat)_(E1) Loewen Db1 Sun 140 Csmnt _ L6 Loewen Dbl Sun 140 (SwngDr)1( 31 B) Loewen Dbl Sun 14,0 (-Csmnt)_(O l� Loewen-Dbl_S un1_4.0_(SwngDr)_(120A) R-21 Wall Loewen D41 S_t�ln 140_(Csmnt)_( 11) Solid -Wood -Door Loe.wen-D.bl-S.un-14.0_(Eixed)_(.C2) Loe.wen-Dbl_Sun1_4.0_(Eixed)-(.0 Loewen Dbl Sun 140 Fixed C2 Lo_ewen_Db1_Sun140_(.SwngDr) (104 Loewen Dbl Sun 140 SwngDr_ 1048 Loewen Dbl Sun 140 SwngDr 104A Loewen Dbl Sun 140 (SwngDr) (118A) Slab -On -Grade 2,607.0 1,248.4 15.0 18.0 23.3 3.7 3.7 3.7 22. 48.0 22.7 23.3 669.5 18.0 40.0 180.0 5,0- 5.0 .05.0 5.0 667.8 41.0_ 6.3 48.0 6.4 48.0 965.7 11.8 32.0 5.0- 5.0 5.0 48.0 48.0 48.0 24.0 perimeter = 387.0 x X X x x x X x X X x X X x X x x X X X x X x x X X X x x x X x x x x X x x x 54 = = = = = = = = = = = = = = = = = = = = = = = = _ = = = 54 54 54 54 54 54 54 54 54 54= 54 54 54 54 54 54 54 54 54 54 54= 54 54 5-4 54 54 54 54 54 Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 47 960 Infiltration: 1.�Sched„oo XAir Sensible x Area 101 X Ceiling Height aeH421 / 6] x ® = 18 742 Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 66,702 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 19 of 26 ROOM HEATING PEAK LOADS Project Title Date Hoyt Residence 1/10/2007 Room Information Design Conditions Room Name 2nd Floor/ Guest Time of Peak Jan 12 am Floor Area Suia94 Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 80 OF Conduction Area U -Value QT of Btu/hr Dbl Sun 140 494.0 x X x X X X X X X X X X X x x x x x x x x x x x x x x x x x x x x x x x x x x 0.2380 X X X x x x x X x x X x x x X x x x x x x x x x x x x x x x x x x x x x x x x 0 = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = 0 494.0 0.0250 54 667 203.1 0.0690 54 757 8.0 0.3700 54 160 8.0 0.3700 54 160 6.3 0.3700 54 126 70.1 0.0690 54 261 10.3 0.3500 54 195 48-0- 0.3500 54 907 10.3 0.3500 54 195 225.4 0.0690 54 840 380 102.1 0.0690 24.0 0.5000 54 648 6.3 0.3700 54= 126 6_3_ 0.3700 126. Items shown with an asterisk (•) denote conduction through an interior surface to another room. Page Total: 5547 Infiltration: [ 1.001 x 1.064 x 494 x 8.80 x 0.717 / 60] x ® = 2 986 Schedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 8,533 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number. Page: 20 of 26 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Date Hoyt Residence 1/10/2007 Room Information Desion Conditions Room Name: Master Suite Outdoor Dry Bulb Temperature: 1120F Floor Area: 951 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72OFOutdoor Daily Range: 349F opaque aurraces R-38 Roof R-21 Wall R-21 Wall R-21 Wall R-21 Wall R-21 Wall R-21 Wall R-21 Wall Orientation Area U -Factor 951.01 x X X X X x X X x X X x 0.0173 X X X X X X X X x X x x 72.0 0.0690 534.0 0.0690 84.0 0.0690 219.6 0.0690 469.9 0.0690 84.0 0.0690 351.0 0.0690 0.0 14.4 48.0 19.0 913 SE 0.0 20.4 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (1-4) 1 Internal Gain Occupants 4 Equi ment 1 CLTD 1 Page Total Btu/hr - 921 114 1,069 191 470 1,005 191 732 4,6941 Orientation Shaded Area x x x x X X X GLF + + + + + + + Unshaded Area X X x X X X X GLF = = = = = = = Btu/hr' SE 0.0 20.4 24.0 28.6 687 (SE) 0.0 14.4 48.0 19.0 913 SE 0.0 20.4 24.0 28.6 687 (SW) 0.0x 18.2+ 15.0X 24.8= 373 (SW) 0.0X 18.2+ 15.0X 24.8= 373 SW 0.0X 18.2+ 6.3X 24.8= 156 (SSW 0.0 18.2 27.5 24.8 683 (SW) 0.0x 18.2+ 6.3X 24.8= 156 Page Total 1 4,0291 Btu/hr x Occupants X 230 Btuh/oCC. = 920 x Dwelling Units X 1,6001 Wafts/sqft = 1,6001 Infiltration: 1.064 x 1.49 x 67.10 x Air Sensible CFM ELA �T TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 15,500 Latent Gain Btu/hr Occupants IF 74 x Occupants x I 200 I Btuh/oCC. = 800 Infiltration: 4 771 x 1.49 x 67.10 x 0.00454 = 2.1(;17 Air Latent CFM ELA pW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 2,967 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 21 of 26 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Hoyt Residence Area Date 1/10/2007 Room Information Design Conditions Room Name: Living Area Outdoor Dry Bulb Temperature: 1120F Floor Area: 3,101 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72 of Outdoor Daily Range: 340F upaque burtaces R-38 Roof R-21 Wall R-21 Wall R-21 Wall R-21 Wall Solid Wood Door Orientation Area X X X X X X x x x x x x U -Factor X X X X X X X X x x x x CLTD 1 = = = = = = = = = = = = N 2,607.0 0.0173 56.0 (NE) 1,248.4 0.0690 29.0 (SE) 669.5 0.0690 31.0 SW 667.8 0.0690 31.0 (NW) 965.7 0.0690 30.2 NW 32.0 0.5000 30.2 0.0X 20.4+ 3.7X 31.9= NE 0.0x 20.4+ 3.7X 31.9= NE 0.0x 20.4+ 22.7x 31.9= NE 0.0x 14.4+ 48.0X 20.9= NE 0.0x 20.4+ 22.7X 31. Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (G3) FxdWdw ICsmntWdw 02) 1 rage I otal Orientation Btu/hr Shaded Area x x GLF + + Unshaded Area X x Page GLF = _ = (tom 0.0x 18.2+ 15.0x 27.5= (NE) 0.0x 18.2+ 18.0X 27.5= (NE) 0.0 18.2 23.3 27.5 (NNE 0.0x 20.4+ 3.7X 31.9= (�LEJ 0.0X 20.4+ 3.7X 31.9= NE 0.0x 20.4+ 3.7X 31.9= NE 0.0x 20.4+ 22.7x 31.9= NE 0.0x 14.4+ 48.0X 20.9= NE 0.0x 20.4+ 22.7X 31. NE 0.0x 18.2+ 23.3X Total Btu/hr 2,525 2,498 1,432 1,428 2,014 484 10 382 Btu/hr Internal Gain Btu/hr Occupants 4 x Occupants X 230 Btuh/occ. = p 920 Equipment 1 x Dwelling Units X 1,6001 Watts/sqft = 1,6001 Infiltration: 1.064 x 1.49 x 218.81 x 1 13,8831 Air Sensible CFM ELA &T TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 44,394 Latent Gain Btu/hr Occupants 0 x Occupants x 2001 Btuh/occ. = 800 Infiltration: 4,771 x 1.49 x 218.81 x 0.00454 = 7 066 Air Latent CFM ELA pW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 7,866 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 22 of 26 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Date Hoyt Residence 1 /10/2007 Room Information Desi n Conditions Room Name: Living Area Outdoor Dry Bulb Temperature: 1120F Floor Area: 3,101 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72 of Outdoor Daily Range: 340F upaque surraces Orientation Area U -Factor CLTD 1 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (F1) 1 3 rage i otal Orientation X X x x + + = X X GLF x SE x 18.2+ = 24.8= SE x 18.2+ x 24.8= = 180.0X 19.4+ x 27.0= x 0.0x = 5.0X 28.6= X 0.0X x 5.0X = SE 0.0x x 5.0X x SW - 18.2+ 41.0X x (SSW x 18.2+ = 24.8= (SW) x 14.4 x 19.0 = 0.0X 18.2+6.4X x 24.8= x = x x = x x = x x = Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (F1) 1 3 rage i otal Orientation Shaded Area X x GLF + + Unshaded Area X X GLF = = SE 0.0x 18.2+ 18.0x 24.8= SE 0.0x 18.2+ 40.0X 24.8= SE 180.0X 19.4+ 0.0x 27.0= SE 0.0x 20.4+ 5.0X 28.6= SE 0.0X 20.4+ 5.0X 28.6= SE 0.0x 20.4+ 5.0X 28.6= SW 0.0x 18.2+ 41.0X 24.8= (SSW 0.0x 18.2+ 6.3X 24.8= (SW) 0.0 14.4 48.0 19.0 SW 0.0X 18.2+6.4X 24.8= Page Total Btu/hr 0 Btu/hr Internal Gain Btu/hr Occu ants El X Occupants X 230 Btuh/oCC. = 920 P p Equi ment x Dwelling Units x 1,6001 Wafts/sqft = 1,6001 Infiltration: 1.064 x 1.49 x 218.81 x Air Sensible CFM ELA �T TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 44,394 Latent Gain Btu/hr Occu ants ---------T--74x Occupants x 200 Btuh/oCC. = 800 Infiltration: 4,771 x 1.49 x 218.81 x 0.00454 = 7,066 Air Latent CFM ELA pW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 7,866 EnergyPro 4.3 by Energysoft User Number: 3665 Job Number: Page: 23 of 26 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Date Hoyt Residence 1/10/2007 Room Information Design Conditions Room Name: Living Area Outdoor Dry Bulb Temperature: 1120F Floor Area: 3,101 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72*FOutdoor Daily Range: 340F 5urtaces Orientation Area U -Factor CLTD 1 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration SwnclGlsDr (1 20A) CsmntWdw (111) FxdWdw S1 Abv FxdWdw S2 Abv FxdWdw (S3) Abv SwngGlsDr1( 04C) SwngGlsDr 1046 SwngGlsDr (104A) SwngGlsDr (118A) Page Total Btu/hr 0 Orientation x X X X x x x X X x + + + + + + + + Unshaded Area X X X X X X X Ix x = = = = = = x (SSW 48.0 14.4 x 19.0 x (NW) 0.0 18.2 x 27.5 x (NW) 0.0x 20.4+ x 31.9= x NW 0.0x 20.4+ x 31.9= x (NW) 0.0 20.4 x 31.9 x (NW) 0.0 14.4 x 20.9 x NW 0.0x 14.4+ x 20.9= x LJ 0.0 14.4 x 20.9 x NW 0.0 14.4 x 20.9 x x x Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration SwnclGlsDr (1 20A) CsmntWdw (111) FxdWdw S1 Abv FxdWdw S2 Abv FxdWdw (S3) Abv SwngGlsDr1( 04C) SwngGlsDr 1046 SwngGlsDr (104A) SwngGlsDr (118A) Page Total Btu/hr 0 Orientation Shaded Area X X X x x x X X GLF + + + + + + + + Unshaded Area X X X X X X X Ix GLF = = = = = = Btu/hr (SSW 48.0 14.4 0.0 19.0 692 (NW) 0.0 18.2 11.8 27.5 325 (NW) 0.0x 20.4+ 5.0x 31.9= 160 NW 0.0x 20.4+ 5.0X 31.9= 160 (NW) 0.0 20.4 5.0 31.9 160 (NW) 0.0 14.4 48.0 20.9 1,001 NW 0.0x 14.4+ 48.0X 20.9= 1,001 LJ 0.0 14.4 48.0 20.9 1.00 NW 0.0 14.4 24.0 20.9 500 I Page Total 5 000 Internal Gain Btu/hr Occupants 4 x Occupants x 230 Btuh/occ. = 920 Equi ment 1 x Dwelling Units X 1,6001 Watts/sqft = 1,6001 Infiltration: 1.064 x 1.49 x 218.81 x = 13 883 Air Sensible CFM ELA DT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 44,394 Latent Gain Btu/hr Occupants 0 x Occupants x 200 1 Btuh/occ. = 800 Infiltration: 4,771 x 1.49 x 218.81 x 0.00454 = 7 066 Air Latent CFM ELA n w TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 7,866 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 24 of 26 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Date Hoyt Residence 11/10/2007 Room Information Design Conditions Room Name: 2nd Floor/ Guest Suite 2 Outdoor Dry Bulb Temperature: 1120F Floor Area: 494 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72 of Outdoor Daily Range: 340F Opaque Surfaces Orientation Area U -Factor CLTD 1 Btu/hr 1 R-21 Wall R-21 Wall Solid Wood Door Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (1-1) 1 Nage I otal Orientation 494.0 X X X X X X X x x X x x 0.2380 X X X X X X X x x X X x 0.0 N 494.0 0.0173 56.0 (NE) 203.1 0.0690 29.0 SE 70.1 0.0690 31.0 SW 225.4 0.0690 31.0 NW 102.1 0.0690 30.2 (NW) 24.0 0.5000 30.2 0.0 14.4 48.0 19.0 (SE) 0.0 20.4 10.3 28.6 NW 0.0x 18.2+ 6.3X 27.5 (NW) 0.0x 18.2+ 6.3X 27.5 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ICsmntWdw (1-1) 1 Nage I otal Orientation Shaded Area x X X x x x GLF + + + + + + Unshaded Area X X X x x x GLF NE 0.0x 18.2+ 8.0x 27.5 (NE) 0.0 18.2 8.0 27.5 NE 0.0x 18.2+ 6.3x 27.5 SE 0.0x 20.4+ 10.3X 28.6 (SE) 0.0 14.4 48.0 19.0 (SE) 0.0 20.4 10.3 28.6 NW 0.0x 18.2+ 6.3X 27.5 (NW) 0.0x 18.2+ 6.3X 27.5 Page Total 0 479 406 150 482 213 363 2.0931 Btu/hr Internal Gain Btu/hr Occu ants 4 X Occupants X 230 Btuh/occ. = 920 P P Equipment 1 x Dwelling Units x 1 1,6001 Watts/sqft = 1,6001 Infiltration: 1.064 x 1.49 x 34.86 x 40 = 2.2121 Air Sensible CFM ELA DT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 9,287 Latent Gain Btu/hr Occu ants 04 X Occupants x 200 Btuh/occ. = 800 Infiltration: 4,771 x 1.49 x 34.86 x 0.00454 = 1126 Air Latent CFM ELA pW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,926 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page:25 of 26 TITLE 24 REPORT Title 24 Report for: Hoyt Residence (Guest House) 80-225 Via Capri Lot #22-23 La Quinta, CA 92253 Project Designer: Gordon Ross 42-829 Cook Street, Suite 104 Palm Desert, CA 92260 (760) 568-1712 Report Prepared By: CJ McFadden BREEZE AIR CONDITIONING 75-145 ST. CHARLES PLACE PALM DESERT, CA 92211, (760) 346-0855 Job Number: Date: 1/10/2007 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: User Number. 3665 TABLE OF CONTENTS- I Cover Page Table of Contents Form CF -1 R Certificate of Compliance Form MF -1 R Mandatory Measures Summary HVAC System Heating and Cooling Loads Summary Room Load Summary Room Heating Peak Loads Room Cooling Peak Loads Manufacturer's Specifications 1 2 3 7 9 10 11 12 13 EnergyPro 4.3 by EnergySoft Job Number: User Number: 3665 Certificate Of Compliance: Residential (Part 1 of 4) CF -1 R _H.o_ytRes.Aence_(_G_uest_Ho_U 484 ft2 ❑ Multi Family ❑ Existing + Add/Alt Existing Floor Area: 1 /10/2007 Project Title -8-0--225-Vi a -Capri -L ot#22--23-Lal-Quinta Building Front Orientation: (NW) 315 deg Raised Floor Area: Date Project Address 484 ft2 Building Permit # DIT 0NING 9.5 ft (760) 346-0855 _BREEZE-ALR_CDN- Documentation Author Ratio: 30.6% Avg. SHGC: 0.28 Number of Stories: Telephone plan Check/Date _E.ner_Q_y_P o Thermostat 15 Zone Name Floor Area Volume Units Zone Type Field Check/Date Compliance Method .HVAC- 4.84. 4,598 1..0.0_ Conditioned- Climate Zone 2 -n/a TDV Standard Proposed Compliance Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Y / N Status JA IV Reference (kBtu/sf-yr) Design Design Margin 7-ONti#L4 Space Heating 2.16 1.10 1.06 Space Cooling 92.60 81.39 11.21 Wall- Wood- 168.0_0.69. R21�Z0..0_-225_ 9.0 [ X ❑New _0.9=A6 Fans 13.27 13.93 -0.66 ZONE #4 Domestic Hot Water 32.39 40.07 -7.67 Pumps 0.00 0.00 0.00 Totals 140.42 136.49 3.93 Percent better than Standard: 2.8% Building Type: [] Single Family ❑ Addition Total Conditioned Floor Area: 484 ft2 ❑ Multi Family ❑ Existing + Add/Alt Existing Floor Area: n/a ft2 Building Front Orientation: (NW) 315 deg Raised Floor Area: 0 ft2 Fuel Type: Natural Gas Slab on Grade Area: 484 ft2 Fenestration: Average Ceiling Height: 9.5 ft Area: 148 ft 2 Avg. U: 0.36 Number of Dwelling Units: 1.00 Ratio: 30.6% Avg. SHGC: 0.28 Number of Stories: 1 BUILDING ZONE INFORMATION # of Thermostat Vent Zone Name Floor Area Volume Units Zone Type Type Hgt. Area .HVAC- 4.84. 4,598 1..0.0_ Conditioned- -Setback- 2 -n/a OPAQUE SURFACES Insulation Act. Gains Condition Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Y / N Status JA IV Reference Location / Comments .Roof Wood- 4.84_ _0.025.0 38.0=0.0_-34.5_ 0 1X ❑New _0j_ -A18 7-ONti#L4 Wall_ Wood_ X0.9 0..0.6.9 R -21_B_0_0_____4.5_ 9.0 lX El New- _0.9=A6 ZONE#_4 Wall_ Wood_ _25.8_ 0_08.9 021 X0_0_ x_35_ 9.0 [ X ❑ Neer 0.9=A6 ZONE #4 Wall- Wood- 168.0_0.69. R21�Z0..0_-225_ 9.0 [ X ❑New _0.9=A6 ZONE #4 Wall- Wood- 3_1.5 0 0.6.9 -&21 X0_0 -315__90. IX ❑ N.ew 09=A6 ZONE #4 ❑ ❑ ❑ ❑ ❑❑ ❑❑ ❑❑ ❑❑ F-1 F-1 °❑o ❑❑ ❑❑o EJ El Run Initiation Time: 01/10/07 15:16:24 Run Code: 1168463784 EnergyPro 4.3 by Energysoft User Number: 3665 Job Number: Page:3 of 13 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Hoyt Residence (Guest House) 2 Bug Screen 1/10/2007 Project Title 0.76 Date FENESTRATION SURFACES 5 Bug Screen 0.76 6 Bu q Screen True Cond. Location/ # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Comments _1— Window_Left_(NE) 6.1 —0.37.0-W RG 0-29 -NERC —4.5_ _9.0_ New Loewen.Db.LS.uaJA-0_(Csmnt)_(Ml)ZON.E #L4 2 Window Left (NE) 6.1 0.370 NFRC 0_29 NFRC 45 90 New Loewen Dbl Sun 140 (Csmnt) W2)ZONE #4 3 Window Rear (SE) 22.7 0.350 NFRC 0_36 NFRC 135 90 New Loewen Dbl Sun 140 Fixed _(C4)_ ZONE #4 4 Window Rear (SE) 48.0 0.350 NFRC 0_20 NFRC 135 90 New Loewen Dbl Sun 140 (Swngtr_ ZONE #4 5 Window Rear (SE) 22.7 0.350 NFRC 0_36 NFRC 135 90 New n Dbl Sun 140 (Fixed) (C33_ ZONE #4 6 Window Front (NW) 6.6 0.370 NFRC 0_29 NFRC 315 90 New Loewen Dbl Sun 140 (Csmnt) (Pl) ZONE #4 7 Window Front (NW)18_0 0.370 NFRC 0.29 NFRC 315 90 New L ewen Dbl Sun 140 ( smnt)_(A_2) ZONE #4 8 Window Front (NNW 18.0 0.370 NFRC 0.29 NFRC 315 90 New Loewen Dbl Sun 140 (Csmnt) (A3) ZONE #4 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168 INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. RExt. Dist. Len. Hgt. Dist. Len. 1 Bug Screen 0.76 2 Bug Screen 0.76 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bu q Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ TVDe (sf) (in.) CaD. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Slab Perimeter 98 None No Insulation 26-A1 New ZONE #4 Run Initiation Time: 01/10/07 15:16:24 Run Code: 1168463784 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page:4 of 13 Certificate Of Compliance: Residential (Part 3 of 4) CF -1 R Hoyt Residence (Guest House) 1/10/2007 Project Title Date HVAC SYSTEMS Heating Minimum Cooling Minimum Condition Thermostat Location Type Eff Type Eff Status Type HVAC -#4 Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC DISTRIBUTION Duct Location Heatinq Coolinq Location HVAC -#4 Ducted Ducted Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. Duct Condition Ducts R -Value Status Tested? 4.2 New Yes WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext. Standard Gas 50 gal or Less Small Gas No Pipe Insulation 1 40,000 50 New 0.52 n/a ' n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length U_ Add 1/2" Control # HP TVDe In Plenum Outside Buried Insulation IN= 1iyil_\:7:(+1 COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Name: Title/Firm: Gordon Ross Address: 42-829 Cook Street, Suite 104 Palm Desert, CA 92260 Telephone: (760) 568-1712 Lic. #: (signature) (date) Enforcement Agency Name: Title/Firm: Address: Telephone: (signature) (date) Documentation Author Name: CJ McFadden Title/Firm: BREEZE AIR CONDITIONING Address: 75-145 ST. CHARLES PLACE PALM DESERT, CA 92211 Telephone: (760) 346-0855 )o 07 (signature) f (date) STAMP Certificate Of Compliance : Residential (Part 4 of 4) CF -1 R Hoyt Residence (Guest House) 1/10/2007 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. I Plan Field The Roof "R-38 Roof' includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual. HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- approvea MtKS proviaer using utt: approves testing anafor venncation metnoas ano must oe reportea on the L;r-4K installation certificate. plan Field The HVAC System "HVAC -#4" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF - 4R. The HVAC System "HVAC -#4" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The Cooling System "PSA2BD / PGC1 RA (2 Ton) 13 SEER" includes credit for a 11.9 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. Run Initiation Time: 01110/07 15:16:24 Run Code: 1168463784 EnergyPro 4.3 by Energysoft User Number. 3665 Job Number: Page:6 of 13 D t I Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE - DESCRIPTION permit application documentation. N/A DESIGNER MENT Building Envelope Measures +§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ ❑x ❑ § 150(b): Loose fill insulation manufacturer's labeled R -Value: ❑ ❑ ❑ .§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not ❑ ❑X ❑ apply to exterior mass walls). +§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. 1. Masonry and factory -built fireplaces have: ❑ Q ❑ a. closable metal or glass door covering the entire opening of the firebox ❑ Q ❑ b. outside air intake with damper and control, flue damper and control ❑ 0 ❑ 2. No continuous burning gas pilot lights allowed. ❑ N ❑ § 150(0: Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ permeance rate no greater than 2.0 perm/inch. ❑ ❑ ❑ § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include ❑ ❑ ❑ CF -6R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. ❑ ❑ ❑ 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ 0 ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain ❑ ❑X ❑ Coefficient (SHGC), and infiltration certification. Page:7 of 13 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ❑X ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ ❑ ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑X ❑ § 1506): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation ❑ ❑X ❑ having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ Q ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire ❑ N ❑ length of recirculating sections of hot water pipes shall be insulated to Table 150B. 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and ❑ ❑X ❑ indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, ❑ ❑ and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page:7 of 13 � t r Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - applicable. N/A DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑X ❑ 605, and Standard 6-5; supply -air and retum-air ducts and plenums are insulated to a minumum installed level of R4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ ❑X ❑ sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. ❑ ❑ ❑ 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ ® ❑ duct tapes unless such tape is used in combination with mastic and draw bands. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ® ❑ 4. Exhaust fan systems have back draft or automatic dampers. 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ ® ❑ dampers. 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ ® ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. § 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ ❑ ❑ 7. Flexible ducts cannot have porous inner cores. § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ ❑ ❑ heater, weatherproof operating instructions, no electric resistance healing and no pilot light. 2. System is installed with: a. At least 36" of pipe between filter and heater for future solar heating. ❑ ❑ ❑ b. Cover for outdoor pools or outdoor spas. ❑ ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ® ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria ❑ ❑ ❑ Lighting Measures § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ ® ❑ 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ ❑X ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ ❑X ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ ❑X ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ ❑X ❑ controlled by an occupant sensor that complies with Section 1'19(d) that does not tum on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are❑ X❑ ❑ certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ ❑X ❑ same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). EnergyPro 4.3 by EnergySoft User Number. 3665 Job Number: Page:8 of 13 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Hoyt Residence (Guest House) 1/10/2007 SYSTEM NAME FLOOR AREA HVAC -#4 484 ENGINEERING CHECKS 11SYSTEM LOAD Number of Systems 1 Heating System Output per System 36,000 Total Output (Btuh) 36,000 Output (Btuh/sgft) 74.4 Cooling System Output per System 24,000 Total Output (Btuh) 24,000 Total Output (Tons) 2.0 Total Output (Btuhlsgft) 49.6 Total Output (sgft/Ton) 242.0 Air System CFM per System 800 Airflow (cfm) 800 Airflow (cfm/sgft) 1.65 Airflow (cfm/Ton) 400.0 Outside Air (%) 4.5 Outside Air (cfm/sgft) 0.07 Note: values above given at ARI conditions 26.0 OF Outside Air 36 cfm 78.6 of 11.0 / 77.6 of Outside Air 36 cfm 73.2/59.7 of Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM I Sensiblel Latent I I CFM I Sensible 492 10,112 1,624 322 12,709 0 1,049 1,173 0 0 36 1,458 874 36 2,033 0 0 1,049 1,173 13,668T72,;;8 PSA2BD / PGC1 RA (2 Ton) 13 SEER 20,011 0 Total Adjusted System Output 20,011 0 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK I Aug 2 pm 76.2 of ® 118.50F Heating Coil LvJ Supply Fan 800 cfm 36,000 36,000 Jan 12 am 118.5 of Supply Air Ducts 117.10F ROOMS 80.0 of h Return Air Ducts 'i 74.9/60.7OF 51.4/50.3OF Cooling Coil Supply Fa 800 cfm 51.4 / 50.3 of Supply Air Ducts Fan 52.7/50.90F 47.1% R.H. ROOMS 72.0 / 59.2 of h Return Air Ducts 'I EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page:9 of 13 � G i ROOM LOAD SUMMARY PROJECT NAME Hoyt Residence Guest House DATE 1/10/2007 SYSTEM NAME HVAC -#4 FLOOR AREA 484 ROOM LOAD SUMMARY 'ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE ZONE #4 Guest Casita 1 492 10,112 1,624 492 10,112 1,624 322 12,709 PAGE TOTAL 1 492 10,112 1,624 322 12,709 TOTAL 1 492 10,112 1,624 322 12,709 EnergyPro By EnergySoft User Number: User Job Number: Page: 10 of 13 T S 1 t ROOM HEATING PEAK LOADS Project Title Hoyt Residence (Guest House) Date 1 /10/2007 Room Information Design Conditions Room Name Guest Casita Time of Peak Jan 12 am Floor Area 484 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 80 OF 0.0250 Conduction Area X X x x X X x X X X x x x x x x x x x x x x x x x x x x x x x x x x x x x x U -Value x x X x x x X x x x x x X x x x x x x x x x x x x x x x x x x x x x x x x x x OT of = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = Btu/hr 484.0 0.0250 54 653 108.6 0.0690 54 404 6.1 0.3700 54 122 6.1 0.3700 54 122 258.4 0.0690 54 963 22.7 0.3500 54 428 48.0 0.3500 54 907 22.7 0.3500 54 428 168.0x _0_6 54 626 315.2 0.0690 54 1.174 6.6 0.3700 _31 18.0 0.3700 54 360 18.0 0.3700 54 360 perimeter = 97.5 0.7300 54= 3,843 Items Shown with an astensK (-)) oenote conaucllon through an Interior surtace to another room. Page Total: I 10,5231 Infiltration: II 1.001X 1.064 x 484 x 9.50 x 0.496 / 60] x ® = 2 186 chedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 12,709 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 11 of 13 f. f t di RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Title Hoyt Residence (Guest House) Area Date 1/10/2007 Room Information Design Conditions CLTD 1 Room Name: Guest Casita Outdoor Dry Bulb Temperature: 1120F Floor Area: 484 sf Outdoor Web Bulb Temperature: 780F Indoor Dry Bulb Temperature: 72 of Outdoor Daily Range: 340F Opaque Surfaces R-21 Wall Wall Orientation Area X X X X X X X X X X X X U -Factor X X X X X x x X x x x X CLTD 1 = = = = = = (N) 484.0 0.0173 56.0 (NE) 108.6 0.0690 29.0 (SE) 258.4 0.0690 31.0 (SW) 168.0 0.0690 31.0 NW 315.2 0.0690 30.2 14.4 48.0 19.0 (SE) 0.0 20.4 22.7 28.6 NW 0.0x 18.2+ 6.6X 27.5= (NW) 0.0x 18.2+ 18.0X 27.5= (NW) 0.0x 18.2+ 18.0X 27.5= Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration 1 P1 rage I oral Orientation Shaded Area x x x X x X x GLF + + + + + + + Unshaded Area X X x X x x X Page GLF = = = = (NE) 0.0 18.2 6.1 27.5 NE 0.0x 18.2+ 6.1X 27.5= (� 0.0 20.4 22.7 28.6 (SE) 0.0 14.4 48.0 19.0 (SE) 0.0 20.4 22.7 28.6 NW 0.0x 18.2+ 6.6X 27.5= (NW) 0.0x 18.2+ 18.0X 27.5= (NW) 0.0x 18.2+ 18.0X 27.5= Total Btu/hr 469 217 553 359 657 2,2561 Btu/hr Internal Gain Btu/hr Occupants B4 X Occupants x 230 Btuh/occ. = 920 Equipment 1 x Dwelling Units X 1,6001 Watts/sqft = 1,6001 Infiltration: 1.064 x 1.24 x 30.67 x X40 = 1619 Air Sensible CFM ELA .OT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 10,1121 Latent Gain Btu/hr Occupants ® x Occupants x 200 Btuh/occ. = 800 Infiltration: 4,771 x 1.24 x 30.67 x 0.00454 = 824 Air Latent CFM ELA n w TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,624 EnergyPro 4.3 by EnergySoft User Number: 3665 Job Number: Page: 12 of 13