BRES2014-11024a
�� VOICE (760) 777-7125
D
78-495'CALLE TAMPICO FAX (760) 777-7011
LA QUINTA, CALIFORNIA 92253 COMMUNITY DEVELOPMENT DEPARTMENT INSPECTIONS (760) 777-7153
BUILDING PERMIT
Application Number:
Property Address:
APN:
Application Description:
Property Zoning:
Application Valuation:
Applicant:
DONALD JACKS
81744 IMPALA DRIVE
LA QUINTA, CA 92253
Date: 10/7/2014
BRES2014-1102 Owner:
81744 IMPALA DR DONALD JACKS
764370003 81744 IMPALA DRIVE
ENCLOSE (1) COVERED PATIO AT REAR OF DWELLING CREATING ADDIT LA QUINTA, CA 92253
$10,000.00
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9
(commencing with Section 7000) of Division 3 of the Business and Professions Code, and
my License is in full force and effect.
License Class: License No.: :LIC -0104570
9
Date: Contractor
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair any
structure, prior to its issuance, also requires the applicant for the permit to file a signed
statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business
and Professions Code) or that he or she is exempt therefrom and the basis for the alleged
exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the
applicant to a civil penalty of not more than five hundred dollars ($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that he
or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors to
construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State
License Law does not apply to an owner of property who builds or improves thereon, and
who contracts for the projects with a contractor(s) licensed pursuant to the Contractors'
State License Law.).
(_) I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
Contractor:
RICE CONSTRUCTION
44701 SAN JOSE AVENUE
PALM DESERT, CA 92260
(760)408-6430
Llc. No.: :LIC -0104570
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance of
the work for which this permit is issued.
_ I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued. My workers' compensation insurance carrier and policy number are:
Carrier:_ Policy Number: _
_ I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 o abor Code, I shall forthwith
comply with thoseprovis ns.
Date: d , ` Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE
HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit issued
as a result of this application , the owner, and the applicant, each agrees to, and shall
defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not
commenced within 180 days from date of issuance of such permit, or cessation of work
for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
1 agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to en t on the above-
mentioned property f�r/inspection purposes. 7
Date: ® r� l /Signature (Applicant or Agent):
FINANCIAL .1,
DESCRIPTION
ACCOUNT
CITY AMOUNT
PAID
PAID DATE
ADDITION, EA ADDITIONAL 500 SF
101-0000-42400
0 $61.49
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
ADDITION, EA ADDITIONAL 500 SF PC
101-0000-42600
0
$17.16
$0.00
PAID BY -
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION -
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
ADDITION, FIRST 100 SF
101-0000-42400
0
$120.12
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
ADDITION, FIRST 100 SF PC
101-0000-42600
0
$168.74
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid forADDITION: $367.51 $0.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
HOURLY PLAN CHECK - YES
101-0000-42600
1.25
$87.50
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid for BLDG CITY STAFF - PER HOUR: $87.50 $0.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
BSAS SB1473 FEE
101-0000-20306
0.
$1.00
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid forBUILDING STANDARDS ADMINISTRATION BSA $1.00 $0.00 .
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
RESIDENTIAL, FIRST 1,000SF
101-0000-42403
0
$143.00
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
RESIDENTIAL, FIRST 1,000SF, PC
101-0000-42600
0
$47.19
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid for ELECTRICAL - NEW CONSTRUCTION: $190.19 $0.00
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
SMI - RESIDENTIAL
101-0000-20308
0
$1.30
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
1
Total Paid forSTRONG MOTION INSTRUMENTATION SMt $1.30 $0.00
TOTALS:$647.50 $0.00
t
max_
F�f OF'rKF'J
Permit Det�affs
City of 1 Quinta
Description: ENCLOSE (1) COVERED PATIO AT REAR OF DWELLING CREATING ADDIT
Type: BUILDING, RESIDENTIAL
Subtype: ADDITION Status: SUBMITTED
Applied: 9/4/2014 PJU
Approved: 10/7/2014 AAL
P.ERIVIIT
Subdivision: TR 30023-2
NUMBER
Issued:
Lot Sq Ft: 0
Building Sq Ft: 0 Zoning:
Finaled:
Valuation: $10,000.00
Occupancy Type: Construction Type:
BRES�20�1
No. Buildings: 0
ENS,
Details: ENCLOSE (1) COVERED PATIO AT REAR OF DWELLING CREATING ADDITIONAL LIVING SPACE.
CHRONOLOGY TYPE`
STAFF NAME
ACTION DATE
COMPLETION DATE
NOTES
Description: ENCLOSE (1) COVERED PATIO AT REAR OF DWELLING CREATING ADDIT
Type: BUILDING, RESIDENTIAL
Subtype: ADDITION Status: SUBMITTED
Applied: 9/4/2014 PJU
Approved: 10/7/2014 AAL
Parcel No: 764370003 Site Address: 81744 IMPALA DR LA QUINTA,CA 92253
Subdivision: TR 30023-2
Block: Lot: 74
Issued:
Lot Sq Ft: 0
Building Sq Ft: 0 Zoning:
Finaled:
Valuation: $10,000.00
Occupancy Type: Construction Type:
Expired:
No. Buildings: 0
No. Stories: 0 No. Unites: 0
Details: ENCLOSE (1) COVERED PATIO AT REAR OF DWELLING CREATING ADDITIONAL LIVING SPACE.
CHRONOLOGY TYPE`
Process Summary
33 �\
i
.Applied to Approved
k".
• • • _
� . �a -::, - r � xT , ,ate -„'i. e g f 'i
,
CHRONOLOGY TYPE`
STAFF NAME
ACTION DATE
COMPLETION DATE
NOTES
RESUBMITTAL
KAY HENSEL
10/6/2014
10/6/2014
CALLED APPLICANT AND THEY WILL PICK UP THIS
TELEPHONE CALL
ARMEN ALTOUNIAN
10/7/2014
10/7/2014
AFTERNOON.
CALLED APPLICANT TO INFORM HIM CORRECTION ARE
TELEPHONE CALL
JIM JOHNSON
9/24/2014
9/24/2014
READY TO PICK UP
Yr
R{^ . ` rt} €=:y # •.3irf G+ c .: }`,3 �y ._ �-�
�. +.r .�.
.'.{!'�,. k..,�' t ..i
x, � .�h.
.f., r., _2..,,+ ..� .x`�. .
w.t �,.r�,.�
� ,�,.rds�,�,��-
•
-
.r sa '�y�;„"r,��$ °�i�: .>k y d C�'r kt
�
rw'�.
yy..�
-
NAME TYPE
NAME
ADiDRESSI
CITY STATE
ZIP PHONE FAX EMAIL
APPLICANT
DONALD JACKS
81744 IMPALA DRIVE
LA QUINTA
CA
92253
(760)777-8676
CONTRACTOR
RICE CONSTRUCTION
44701 SAN JOSE
PALM DESERT
CA
92260
(760)777-8676
AVENUE
OWNER
DONALD JACKS
81744 IMPALA DRIVE
LA QUINTA
CA
92253
(760)777-8676
Printed: Tuesday, October 07, 2014 2:09:05 PM 1 of 3 ��VV Cyf TFMC
Oi
rOF fNF
Permit Det�ailS
City of la Qu i nta
OEM -rel L,,.., - ,.. .. i.. .,...
PERMIT
NUMBER
CLTD
BRERR
ACCOUNT
-11f
I
PAID
PAID DATE
RECEIPT #
CHECK #
METHOD
PAID BY
BY
ADDITION, EA
OEM -rel L,,.., - ,.. .. i.. .,...
CLTD
DESCRIPTION
ACCOUNT
CITY
AMOUNT
PAID
PAID DATE
RECEIPT #
CHECK #
METHOD
PAID BY
BY
ADDITION, EA
101-0000-42400
0
$61.49
$0.00
ADDITIONAL 500 SF
ADDITION, EA
101-0000-42600
0
$17.16
$0.00
ADDITIONAL 500 SF PC
ADDITION, FIRST 100 SF
101-0000-42400
0
$120.12
$0.00
ADDITION, FIRST 100 SF
101-0000-42600
0
$168.74
$0.00
PC
Total Paid forADDITION: $367.51 $0.00
HOURLY PLAN CHECK -
101-0000-42600
1.25
$87.50
$0.00
YES
Total Paid for BLDG CITY STAFF - PER HOUR: $87.50 $0.00
BSAS SB1473 FEE
1 101-0000-20306
1 0
$1.00
$0.00
Total Paid forBUILDING STANDARDS ADMINISTRATION
$1.00 $0.00
BSA:
RESIDENTIAL, FIRST
101-0000-42403
0
$143.00
$0.00
1,000SF
RESIDENTIAL, FIRST
101-0000-42600
0
$47.19
$0.00
1,000SF, PC
Total Paid for ELECTRICAL - NEW CONSTRUCTION: $190.19 $0.00
SMI - RESIDENTIAL
101-0000-20308
0
$1.30
$0.00
Total Paid forSTRONG MOTION INSTRUMENTATION SMI: $1.30 $0.00
._.. Y:;aS.' :. :. ..., s< .v. •. a: � v' � "ft};• ..:. �. :h... ...-. ,::.. s,. '.x > 5 fr 57 ;?' - w;f.•: .+- - ds
-.k { ('-�Yy- ? F�j M � �`� . 1 °'� 1 11 fi'F1,3, '.{p{ �yG �A i..LL,�p,+t. � :t �..' A,•:at�a `-t:a�,',.k ;oro ^•t��av ro^';;�•I- h ra. +
•a`rtLr" _•.tia� ,.»-{¢`V9Ya: J.
Printed: Tuesday, October 07, 2014 2:09:05 PM 2 of 3 0flp ""'-'
Perimit �e MIs PERMIT NUMBER
-: City of La Quinta BRES•2014-1102
( :.::.' 4. �'-fs.'R•. a -. �..;c ;( r,s„
.. !Tr Y'.h 4A4 -..
. s.4•"_ �yf �{✓^
}Fi J..x t f
r ♦moi.+r .
. $ ,
� .s'i*y{,
go
t
"{
,!-� .. 4.:�.,t ..}
?+. s t+ .ke)'' .-hl j,. ( :.i �'` ...'.,'v'm'eL�`k{�..yYtSi 'fF'.;
t. i�ii� "•:r�:.�'Si �e
t.. -f ..6 _- _t.� ..� .._ ,�a .
RETURNED
STATUS
REMARKS
REVIEW TYPE
REVIEWER
SENT DATE
DUE DATE
NOTES
DATE
ARMEN
9/15/2014
9/18/2014
9/15/2014
REVISIONS REQUIRED
RFC
NON-STRUCTURAL
1ST REVIEW RFC
ALTOUNIAN
STRUCTURAL
JIM JOHNSON
9/15/2014
9/29/2014
9/24/2014
REVISIONS REQUIRED
CORRECTIONS
CORRECTIONS REQUIRED
PER B.H. PLEASE CHECK STRUCTURAL RESPONSES
ARMEN
APPROVED
APPROVED PER
IN HOUSE. MAY NOT NEED TO GO TO
NON-STRUCTURAL
ALTOUNIAN
10/6/2014
10/13/2014
10/6/2014
W/CONDITIONS
REDLINES
CONSULTANT AGAIN.
SEE REDLINES ON FULL SET OF PLANS.
ARMEN
APPROVED PER
STRUCTURAL
10/6/2014
10/13/2014
10/7/2014
SEE REDLINES -ON FULL SET OF PLANS
ALTOUNIAN
REDLINES
-BOND INFORMATION,
Printed: Tuesday, October 07, 2014 2:09:05 PM 3 of 3
,. ��'
Date
10/7/14
No.
31578
Owner
Donald Jacks
Address
81744 Impala Drive
City
La Quinta Zip
Tract #
Type
Residential Addition
CERTIFICATE OF COMPLIANCE
Desert Sands Unified School District
47950 Dune Palms Road
La Quinta, CA 92253
(760) 771-8515
APN #
Jurisdiction
Permit #
No. of Units
BERMUDA DUNES
RANCHO MIRAGE
INDIAN WELLS ti
PALM DESERT
LAQUININDIO Ty��y
764-370-003
La Quinta
1
Lot # No. Street S.F. Lot # No. Street S.F.
Unit 1 81744 Impala Drive 122 Unit 6
Unit 2 Unit 7
Unit 3 Unit 8
Unit 4 Unit 9
Unit 5 Unit 10
Comments
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under
500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile
homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
;X441T,12-1
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 122 S.F. or $0.00 have been paid for the property listed above and that
building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued.
Fees Paid By Exempt - Donald Jacks Check No.
Bank Name/Recipient of Certificate Telephone 760-777-8676
Funding Exempt
By Dr. Gary Rutherford
Superintendent ) I
Fee collected /exem ed by S a nM Ivrely Payment Recd ,i 0 5a �� J
=Over/Undpe
Signature
�r` , S h..1 .y r
NOTICE: Pursuant to Government Code Section 66020(d)(1), Tw'
willo notify you that the 90 -day approval period in whioh you may protest the fees
or other payment identified above will begin to run from the dabuilding or installation permit for this project is issued, 'or from the date on
which those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed seal
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
Trilogy at'La Quinta
60-750 Trilogy Pkwy;
La Quinta, CA 92253 Trilogy
Ph: 760-777-6059
Fax: 760-777-1620 TrHag- at La Quinta Matareuauce
Monday, August 18, 2014
Donald L. Jacks / Meryl M Jacks
81744 Impala Dr
La Quinta CA 92253-7703
RE: Design Review Modification Conditionally Approved
-'— - 81744 Impala -Dr /-Custoriier YD #:"TRI;:AQ=0259=01"—` '
Dear Donald L. Jacks / Meryl M Jacks:
We are pleased to inform you that your plans for converting two existing patio covers into living spaces, so that
they become as part of the home, received on August 13, 2014, have been approved by the Design
Review Committee with the following conditions: 7, 8, 19, 21 and 23. The stucco must match and be consistent
with the existing stucco color (see attached color).
Please note: Any damages caused by contractors due to construction must be repaired; all irrigation and
landscape shall be restored to the original condition .
This approval does not constitute consent by the Association for the applicant to encroach, trespass, or build on ,
any,property other than that of the applicant. This approval is related solely to the items reserved for approval by
the CC&R's in accordance'with the Design Review Guidelines. The approval does not extend to the quality of
work done by your architect, or contractor, or to any structural engineering, soils engineering, or site grading and
drainage design. You are urged to obtain the services of a state licensed professional for consultation as needed.
The Design Review Committee is composed of volunteers. As such, it does not review applications to ensure
compliance with building codes, or other local or state laws. Please be advised that this approval does not relieve
you from obtaining any necessary building permits from the governmental agencies involved to ensure
compliance with these codes. Any violations of these ordinances will be your responsibility to correct. Thank you
for your patience in this matter and for complying with the Association's policies and standards.
Sincerely,
For the Design Review Committee,
Mirna Hernandez
Asst Manager On -Site Property
Enclosures
cc: Board of Directors
Design Review Committee
TRILOGY AT LA QUINTA H.O.:
CONDITIONNS OF APPROVAL (,v
Property Address: =—rhnei (o Dr, Date Reviewed: ell
Conditions
Your plans have been approved, provided that you meet die items cliecked below and all work is consisteut with the
of Approval
Design Guidelines.
1
The patio cover material must be Alumna wood or other similar wood like constructions. Roofing materials shall
match the roof material of the dwelling or be open wood lattice
2
The color of the patio cover matches the homes stucco, accent, fascia or white.
3 .
Any patio cover or awning to be u>stalled and attached to the home must be installed in such a manner that it
does not compromise the integrity of the water permeability of the home.
4
Due to the patio covers size it must be constructed with variable heights or must be constructed in two sections
with a separation un between
5
The size of the patio cover is limited to the size of the proposed patio slab.
6
The proposed retractable awning may not be a striped awning. It must be a neutral color that blends with the
home_._>Pl w-submita.s�wuple of dhP. fabric..
7
Obtain services of a state licensed professional for consultation.
8
Obtain necessary building permits from the city of La Quanta, meeting setback requirements per city code and
maintain the existing drainage.
9
Maintain positive drainage un accordance with the Trilogy Designs Guidelines (Section 3.8).
10
The screen door must be the color of the house stucco or be black.
11
underground drainage is sus e e s nee to Germinate un the grass s e an a us with the to and
ed with a pop -up drain cover.
Pool, spa, fountain, rind air conditioning equipment set backs must comply with City of La Quinta codes. All
12
equipment shall be located, screened, or recessed in a manner so as to not be viewable from any lot or street and
the noise from die equipment attenuated for the adjacent property owners. Pool set backs are Gro for lnardscape
and 18" for water lane.
13
IThe color of die proposed concrete is natural or a neutral tone.
14
Rear yard may not exceed 70% hardscape and must have a minimum of 3096 softscape, measured from the rear
building face of wall to the side property lines.
15
Proposed planting meets with the Trilogy Rear Yard Minimum Planting Requirements standards and all plants
are included ou the Revised Approved Plant List contained in the Designs Guidelines.
16
The proposed wall or iron work to match the existing developer retaining wall as material, style and color or shall
be die Frazee Paint color specified in the guidelines.
17 '
Repl-ce block wall pen= Shea Homes standard block wall specification, if removing any portion of block Wall 16
gains access to rear or side yard (requires nispection of rebar: before cap is installed).
18
Refer to Exhibit "F" a1 the Design Guidelines. (Block Wall Design).
X
19
When work is completed, please submit Notice of Completion form attached.
20
Make sure rear yard property line pins (markers) remain during construction (applies to golf course lots only)
21
All contractors must meet the Association representative prior to commencing construction.
22
Resubmit showing drainage flow/plass.
23
See notes on plans (if any)
24
An independent irrigation controller must be used for the rear yard, it cuuiot be tied into the front yard.
Notes v r
BUILDING ENERGY ANALYSIS REPORT
C000�Py
PROJECT:
MR. & MRS. JACKS'S RESIDENCE
81744 IMPALA DR.
La Quinta, Ca 92253
Project Designer:
DONALD L. JACKS
81744 IMPALA DR.
La Quinta, Ca 92253
Report Prepared by:
Santiago Lopez-Ocampo
Santiago Lopez-Ocampo
P.O. Box 1018
La Quinta, Ca 92247
760.485.8927
CITY of LA QUINTA (;' 1 i QF L1 � Q� � ��~
PME DEPT.
Li�
SAFETY
LQ092914V
�ON
R
Date: A.
YBY
9/29/2014
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
Ener Pro 6.3 by EnergySoft User Number: 5732 ID: LQ092914
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF -1 R Certificate of Compliance 3
Form MF -1 R Mandatory Measures Summary 11
HVAC System Heating and Cooling Loads Summary 14
I
EnergyPro 6.3 by EnergySoft Job Number: ID: L0092914 User Number: 5732
0
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD-
Project
ETHODProject Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis Input File Name: Jacks Residence Con -092914 - EP6.xml
CF1 R -PRF -01
Page 1 of 8
GENERAL INFORMATION
01
Project Name Jacks Residence
02
Calculation Description Title 24 Analysis
03
Project Location 81744 IMPALA DR.
04
CA City La Quinta
05
Standards Version Compliance 2014
06
Zip code 92253
07
Compliance Manager Version BEMCmpMgr 2013-3 (651)
08
Climate Zone CZ15
09
Software Version EnergyPro 6.3
10
Building Type Single Family
11
Front Orientation (deg/Cardinal) 180
12
Project Scope Addition and/or Alteration
13
Number of Dwelling Units 1
14
Total Cond. Floor Area (FT2) 2781
15
Number of Zones 2
16
Slab Area (FT2) 2805
17
Number of Stories 1
18
Addition Cond. Floor Area 214
19
Natural Gas Available Yes
20
Addition Slab Area (FT2) 214
21
Glazing Percentage (%) 18.5%
COMPLIANCE RESULTS
01 Building Complies with Computer Performance
02 This building DOES NOT require HERS Verification
ENERGY USE SUMMARY
04 05
06
07
08
Energy Use (kTDV/ft2-yr) Standard Design
Proposed Design
Compliance Margin
Percent Improvement
Space Heating 1.99
2.54
-0.55
-27.6%
Space Cooling 199.75
197.95
1.80
0.9%
IAQ Ventilation 0.00
0.00
0.00
0.0%
Water Heating 9.75
9.75
0.00
0.0%
Photovoltaic Offset —
0.00
0.00
—
TOTAL 211.49
210.24
1.25
-- 016%
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651
& SAFETY DEPT.
I--% RO UC
FOR CONSTR
DATE BY
HERS Provider:
Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis Input File Name: Jacks Residence Corr092914 - EP6.xml
REQUIRED SPECIAL FEATURES
The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis.
Exposed slab floor in conditioned zone
CF1 R -PRF -01
Page 2 of 8
PROJECT HERS FEATURES
The following are project -level features that must be field -verified as a condition for meeting the modeled energy performance for this computer analysis. These, plus any additional HERS features listed
in the building components tables below requre field verification by a certified HERS Rater.
Check the individual building component sections below for any required HERS verification requirements.
BUILDING FEATURE INFORMATION
01
02
03
04
05
06
07
Project Name
Conditioned Floor Area (sft)
Number of Dwelling
Units
Number of Bedrooms
Number of Zones
Number of
Ventilation Cooling Systems
Number of Water
Heating Systems
Jacks Residence
2781
1
6
2
0
1
ZONE INFORMATION
01
02
03
04
05
06
07
Zone Name
Zone Type
HVAC System Name
Zone Floor Area
(ft')
Avg. Ceiling
Height
Water Heating System 1
Water Heating System 2
Existing
Conditioned
HVAC Systeml
2567
10
DHW Sys 1
Addition
Conditioned
HVAC Systeml
214
10
DHW Sys 1
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651 Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis
Input File Name: Jacks Residence Corr092914 - EP6.xml
CF1 R -PRF -01
Page 3 of 8
OPAQUE SURFACES
01
02
03
04
05
06
09
10
11
01
02
03
04
05
06
07
08
09
10
Name
Zone
Construction
Azimuth
Orientation
Gross Area (ft2)
Window
or Door Area (ft2
)
Tilt(deg)
Status
Verified
Existing
Condition
Ri/SE, 65.8,3'x 10'
Existing
R-13 Wall
135
315
658.3
84'
90
Existing
No
Re/NE, 63.83'x 10'
Existing
R-13 Wall
45
225
631
148
90
Existing
No
Le/NW, 65.83'x 10'
Existing
R-13 Wall
315
135
658.3
148.3
90
Existing
No
Fr/SW, 63.83'x 10'
Existing
R-13 Wall
225
45
631
36.9
90
Existing
No
Roof
Existing
R-30 Roof Attic
726
Existing
No
- Roof 2
Existing
R-30 Roof Attic
455
Existing
No
Roof 3
Existing
R-30 Roof Attic
938
Existing
No
Roof 4
Existing
R-30 Roof Attic
477
Existing
No
Re/NE, 29.33'x 10'
Addition
R-15 Wall
45
225
293.3
96
90
New
N/A
Re/NE, 7.5' x 10'
Addition
R-15 Wall
45
225
96
90
New
N/A
Roof 5
Addition
R-30 Roof Attic
186
Existing
No
Roof 6
Addition
R-30 Roof Attic
28
Existing
No
ATTIC
01
02
03
04
05
06
09
10
11
Name
Construction
Roof Rise
Roof
Reflectance
Roof
Emittance
Radiant
Barrier
Cool Roof
Status
Verified
Existing
Condifion
Attic
Attic Roof Cons
3.321
0.1
0.85
No
No
Existing
No
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651 Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis Input File Name: Jacks Residence Corr092914 - EP6.xml
CF1 R -PRF -01
Page 4 of 8
WINDOWS
01
02
01
02
03 04 05
06
07
08 09
10
11
Name
Side of Building
Width(ft Height Multiplie
) (ft) r
Area (ft2)
U -factor
SHGC Exterior Shading
Status
Verified
Existing
Condition
6080 SGD
Ri/SE, 65.83'x 10'
- - 1
48.0
0.34
0.31
Existing
No
6080 SGD 2
RUSE, 65.83'x 10'
- - 1
36.0
0.34
0.31
Existing
No
4050 XO
Re/NE, 63.83'x 10'
- - 1
20.0
0.34
0.33
Existing
No
4060 XO
Re/NE, 63.83'x 10'
- - 1
24.0
0.34
0.33
Existing
No
4060 XO 2
Re/NE, 63.83'x 10'
- - 1
24.0
0.34
0.33
Existing
No
2060 SH
Re/NE, 63.83'x 10'
- - 1
12.0
0.34
0.33
Existing
No
6060 XO
Re/NE, 63.83'x 10'
- - 1
36.0
0.34
0.30
Existing
No
2060 SH 2
Re/NE, 63.83'x 10'
- - 1
12.0
0.34
0.33
Existing
No
5040 XO
Re/NE, 63.83'x 10'
- - 1
20.0
0.34
0.30
Existing
No
3080 FR DR
Le/NW, 65.83'x 10'
- - 1
24.0
0.34
0.31
Existing
No
5020 XO
Le/NW, 65.83'x 10'
- - 1
10.0
0.34
0.33
Existing
No
1660 FIX
Le/NW, 65.83'x 10'
- - 1
9.0
0.34
0.33
Existing
No
5060 XO
Le/NW 65.83'x 10'
- - 1
30.0
0.34
0.30
Existing
No
2030 XO
Le/NW, 65.83'x 10'
- - 1
6.0
0.34
0.30
Existing
No
2880 FR DR
Le/NW, 65.83'x 10'
-- - 1
21.3
0.34
0.31
Existing
No
4060 XO 3
Le/NW, 65.83'x 10'
- - 1
24.0
0.34
0.30
Existing
No
4060 XO 4
Le/NW, 65.83'x 10'
- - 1
24.0
0.34
0.30
Existing
No
1616 FIX
Fr/SW, 63.83'x 10'
- - 1
2.3
0.34
0.33
Existing
No
1616 FIX 2
Fr/SW, 63.83'x 10'
- - 1
2.3
0.34
0.33
Existing
No
1616 FIX 3
Fr/SW, 63.83'x 10'
- - 1
2.3
0.34
0.33
Existing
No
5060 XO 2
Fr/SW, 63.83'x 10'
- - 1
30.0
0.34
0.30
Existing
No
12080 New
Re/NE, 29.33'x 10'
- - 1
96.0
0.34
0.23
New
N/A
DOORS
01
02
03
04
05
06
Name
Side of Building
Area (ft2)
U -factor
Status
Verified Existing Condition
3080
Le/NW, 65.83'x 10'
24.0
0.50
Existing
No
2880
Fr/SW, 63.83' x 10'
21.3
0.50
Existing
No
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651
HERS Provider:
Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence
Calculation Description: Title 24 Analysis
Calculation Datefrime: 05:39, Mon, Sep 29, 2014
Input File Name: Jacks Residence Corr092914 - EP6.xml
CF1 R -PRF -01
Page 5 of 8
OPAQUE SURFACE CONSTRUCTIONS
01
02
03
04
05
Construction Name
Surface Type
Framing
Total Cavity R -value
Assembly Layers
Zone
Area (ft)
Permeter
(ft)
Edge Insul. R -value
Roofing: Light Roof (Asphalt Shingle)
Heated
Status
2x4 Top Chord of Roof
Slab -on -Grade
Above Deck Insulation - no insulation -
Attic Roof Cons
Attic Roofs
Truss @ 24 in. O.C.
- no insulation -
Roof Deck: Wood Siding/sheathing/decking
Existing
No
Slab -on -Grade 2
Addition
Cavity: - no insulation -
0.1
- none -
0
No
inside Finish: - select inside finish -
No
- Inside Finish: Gypsum Board
Sheathing/Insulation: - no sheathingfinsul. -
R-13 Wall
Exterior Walls
2x4 @ 16 in. O.C.
R 13
Cavity: R 13
Sheathing/Insulation: - no sheathinglinsul. -
Exterior Finish: Wood Siding/sheathing/decking
Attic Floor. - no attic floor -
R-30 Roof Attic
Ceilings (below attic)
2x4 @ 24 in. O.C.
R 30
Cavity: R 30
Sheathinglnsulation - no sheathinglinsul. -
Inside Finish: Gypsum Board
'Inside Finish: Gypsum Board
Sheathing/Insulation: - no sheathingfinsul. -
R-15 Wall
Exterior Walls
2x4 @ 16 in. O.C.
R 15
Cavity: R 15
Sheathing/Insulation: - no sheathinglinsul. -
Exterior Finish: Wood Siding/sheathing/decking
SLAB FLOORS
01
02
03
04
05
06
07
08
09
Name
Zone
Area (ft)
Permeter
(ft)
Edge Insul. R -value
Carpeted
Fraction
Heated
Status
Verified
Existing
Condition
Slab -on -Grade
Existing
2805
0.1
- none -
0.8
No
Existing
No
Slab -on -Grade 2
Addition
214
0.1
- none -
0
No
New
No
WATER HEATING SYSTEMS
01
02
03
04
05
06
Name
Distribution Type
Number of Heaters
Solar Fraction (%)
Ststus
Verified Existing
Condition
DHW Sys 1
Standard
1
Annual
Existing
No
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651
HERS Provider:
Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence
Calculation Description: Title 24 Analysis
Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Input File Name: Jacks Residence Corr092914 - EP6.xml
CF 1 R -PRF -01
Page 6 of 8
WATER HEATERS
01
02
03
04
05
06
07
08
Name
Heater Element Type
Tank Type
Tank Volume
(gal)
Energy Factor or
Efficiency
Input Rating
Tank Exterior
Insulation R -value
Standby Loss
(Fraction)
DHW Heater 1
Natural Gas
Small Storage
50
0.575 EF
40000-Btu/hr
0
0
WATER HEATING - HERS VERIFICATION
01
02
03
04
05
06
07
Name
Pipe Insulation
Parallel Piping
Compact Distribution
Point -of Use
Recirculation with
Manual Control
Recirculation with
Sensor Control
DHW Sys 1
n/a
n/a
n/a
n/a
n/a
n/a
HVAC SYSTEMS
01
02
01
02
03
04
05
06
07
08
09
Bypass Duct
Name
Heating System
Cooling System
Zonally Controlled
Compressor
HERS Verification
Component 1
CoolingCom
SplitAirCond - Split air conditioning
8.488
9.7
No
No
Distribution
Fan
Floor Area
Verified Existing
Name
System Type
Name Ducted
Name Ducted
System
System
Served
Status
Condition
HVAC System1
Other Heating and
Heating
Yes
Cooling
Yes
Air Distribution
HVAC Fan
2781
Existing
No
Cooling System
Component 1
Component 1
System 1
1
HVAC - HEATING SYSTEMS
01 02 03
Name Type Efficiency
Heating Component 1 CntrlFurnace - Fuel -fired central furnace 78 AFUE
HVAC - COOLING SYSTEMS
01
02
03 04
05
06
07
08 09 08
Name
Efficiency
Insulation
Duct Leakage R -value
Multi -speed
Bypass Duct
Name
System Type
EER SEER
Zonally Controlled
Compressor
HERS Verification
Component 1
CoolingCom
SplitAirCond - Split air conditioning
8.488
9.7
No
No
Cooling Component
1 -hers -cool
system
HVAC - DISTRIBUTION SYSTEMS
01
02
03 04
05 06
07
08 09 08
Name
Type
Insulation
Duct Leakage R -value
Supply Duct Return Duct
Location Location
Bypass Duct
Verify Existing HERS
Status Condition Verification
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651 Report Generated at 2014-09-29 05:42:09
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis Input File Name: Jacks Residence CorrO92914 - EP6.xml
CF1 R -PRF -01
Page 7 of 8
Registration Number: Registration Date/Time: HERS Provider:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651 Report Generated at 2014-09-29 05:42:09
114
CERTIFICATE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE METHOD
Project Name: Jacks Residence Calculation Date/Time: 05:39, Mon, Sep 29, 2014
Calculation Description: Title 24 Analysis Input File Name: Jacks Residence Con -092914 - EP6.xml
CF1 R -PRF -01
Page 8 of 8
DOCUMENTATION AUTHOR'S DECLARATION STATEMENT
1. 1 certify that this Certificate of Compliance documentation is accurate and complete.
Documentation Author Name:
Documentation Author Signature:
Santiago Lopez-Ocampo
Company: •
Signature Date:
Santiago Lopez-Ocampo
9/29/2014
Address:
CEA/HERS Certification Identification (If applicable): r
P.O. Box 1018
r "
City/stateCa Quinta, Ca 92247
Phone: 760.485.8927
RESPONSIBLE PERSON'S DECLARATION STATEMENT
I certify the following under penalty of perjury, under the laws of the State of California:
1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance.
2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of
Regulations.
3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents,
worksheets, calculations, plans and specifications submitted to the enforcement agency for approval with this building permit application.
Responsible Designer Name:
ResponsibleDesigner Signature:
Company:
Date Signed:
DONALD L. JACKS
Address:
License:
81744 IMPALA DR.
City/State/Zip: _
Phone:
La Quinta, Ca 92253
Registration Number: Registration Date/Time:
CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-06022014-651
HERS Provider:
Report Generated at 2014-09-29 05:42:09
MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MFA R
Project Name
Date
MR. & MRS. JACKS'S RESIDENCE
9/29/2014
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF -
1 R -ALT Form) shall supersede the items marked with an asterisk (*) below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with plans.
Building Envelope Measures:
110.6(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§110.6(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a).
110.7: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
110.8(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -2R Form.
§110.8(i): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §110.8(i) when the
installation of a Cool Roof is specified on the CF -1 R Form.
*§1 50.0 a : Minimum R-30 R-19 for Additions/Alterations insulation in wood -frame ceiling orequivalent U -factor.
§150.0(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value.
*§150.0(c): Minimum R-13 insulation in 2x4 wood -frame wall R-19 in 2x6 orequivalent U -factor.
*§150.0(d): Minimum R-19 insulation in raised wood -frame floor orequivalent U -factor.
§150.0(f): Air retarding wrap is tested, labeled, and installed according to ASTM E1677-95(2000) when specified on the CF -1 R Form.
§150.0(g): Mandatory Vapor barrier installed in Climate Zones 14 or 16.
§150.0(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance
rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration.
§150.0(q) Fenestration Products. Fenestration separating conditioned space from unconditioned space or outdoors shall meet the
requirements of either Item 1 or 2 below:
1. Fenestration, including skylight products, must have a maximum U -factor of 0.58.
2. The weighted average U -factor of all fenestration, including skylight products, shall not exceed 0.58.
EXCEPTION to Section 150.0(q)1: Up to 10 square feet of fenestration area or 0.5 percent of the Conditioned Floor Area, whichever is
reater, is exempt from the maximum U -factor requirement.
150.0 r Solar Ready Buildings. Shall meet the requirements of Section 110.10 applicable to the building project.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
150.0 a 1A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox.
§150.0(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
equipped with a with a readily accessible, operable, and tight-fifting tight-fittingdamper and or a combustion -air control device.
§150.0(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the
outside of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110.0-§110.3: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§110.3(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §110.3(c)5.
§110.5: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and
spa heaters.
§150.0(h): Heating and/or cooling loads are calculated in accordance with ASHRAE SMACNA or ACCA.
§150.0(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 11 0.2 c .
§150.00)1A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally
wrapped with insulation having an installed thermal resistance of R-12 or greater.
§150.0(j)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the
tank.
EnergyPro 6.3 by EnergySoft User Number: 5732 ID: LQ092914 Page 11 of 14
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MFA R
Project Name
Date
MR. & MRS. JACKS'S RESIDENCE
9/29/2014
§150.00)2A: All domestic hot water system piping conditions listed below, whether buried or unburied, must be insulated per TABLE
120.3-A.
i. The first 5 feet (1.5 meters) of hot and cold water pipes from the storage tank.
ii. All piping with a nominal diameter of 3/4 inch (19 millimeter) or larger.
iii. All piping associated with a domestic hot water recirculation system regardless of the pipe diameter.
iv. Piping from the heating source to storage tank or between tanks.
v. Piping buried below grade.
vi. All hot water pipes from the heating source to the kitchen fixtures.
§150.00)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards
Table 120.3-A.
§150.0(j)3A: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
§150.00)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
§150.0(m)l: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC
Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed
level of R-6 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that
meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic
or tape is used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used
§150.0(m)l: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150.0(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150.0(m)7: Exhaust fans stems have back draft or automatic dampers.
§150.0(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated
dampers.
§150.0(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
§150.0(m)10: Flexible ducts cannot have porous inner cores.
§150.0(n)l: Systems using gas or propane water heaters, whether tank or on -demand, to serve individual dwelling units shall include
all the following components :
A. A 120V electrical receptacle that is within 3 feet from the water heater and accessible to the water heater with no obstructions;
B. A Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the space where the water
heater is installed;
C. A condensate drain that is no more than 2 inches higher than the base of the installed water heater, and allows natural draining
without pump assist,
D. A gas supply line with a capacity of at least 200,000 Btu/hr.
§150.0(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2 Ventilation and Acceptable Indoor Air Quality
in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in
Section 4 of that Standard.
Pool and Spa Heating Systems and Equipment Measures:
§110.4(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance heating ora pilot light.
§110.4(b)l: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines, or built-up connections for future solar heating.
110.4(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover.
§110.4(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
§150.0(p): Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of 150.0
Residential Lighting Measures:
§150.0(k)1A: Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with Section 150.0(k) in accordance
with TABLE 150.0-A or TABLE 150.0-B as applicable.
150.0 k 1C: The wattage of permanently installed luminaires shall be determined asspecified by §130.0(c).
150.0 k 1 D: Ballasts for fluorescent lamps rated 13 Wafts or greater shall be electronic and shall have an output frequency - 20 kHz.
§150.0(k)l E: Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume
no more than five watts of power per luminaire or exhaust fan as determined in accordance with Section 130.0(c). Night lights shall not
be required to be controlled by vacancy sensors.
EnergyPro 6.3 by EnergySoft User Number: 5732 ID: LQ092914 Page 12 of 14
MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MFA R
Project Name
Date
MR. & MRS. JACKS'S RESIDENCE
1912912014
150.0 k 1 F: Lighting integral to exhaust fans in rooms other than kitchens, shall meet the applicable requirements of §150.0(k).
150.0(k)2: All switching devices and controls shall meet the requirements of §150.0(k)2.
§150.0(k)3: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION: Up to 50 wafts for dwelling units less than or equal to 2,500 ft2 or 100 watts
for dwelling units larger than 2,500 ft2 may be exempt from the 50 percent high efficacy requirement when all
lighting in the kitchen is controlled in accordance with the applicable provisions in Section 150.0(k)2, and is also
controlled by vacancy sensors or dimmers.
§150.0(k)4: Permanently installed lighting that is internal to cabinets shall use no more than 20 wafts of power per linear foot of
illuminated cabinet.
§150.0(k)5: Lighting installed in bathrooms shall meet the following requirements:
A. A minimum of one high efficacy luminaire shall be installed in each bathroom; and
B. All other lighting installed in each bathroom shall be high efficacy or controlled by vacancy sensors.
§150.0(k)6: Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and
controlled by vacancy sensors.
§150.0(k)7: Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be
high efficacy, or shall be controlled by either dimmers or vacancy sensors.
EXCEPTION 1: Luminaires in closets less than 70 square feet.
EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site.
§150.0(k)8: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the luminaire is airtight with air
leakage less than 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150.0(k)9A: For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on
the same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements:
i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of items
ii or iii below; and
ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a
motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and
automatically reactivates the motion sensor within 6 hours
iii. Controlled by one of the following methods:
a. Photocontrol not having an override or bypass switch that disables the photocontrol; or
b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and
which is programmed to automatically turn the outdoor lighting OFF during daylight hours; or
c. Energy management control system which meets all of the following requirements:
At a minimum provides the functionality of an astronomical time clock in accordance with Section 110.9;
meets the Installation Certification requirements in Section 130.4; meets the requirements for an EMCS in
Section 130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and,
is programmed to automatically turn the outdoor lighting OFF during daylight hours.
§150.0(k)9A: For low-rise multi -family residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and
outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the
following requirements:
i. Shall comply with Section 150.0(k)9A; or
ii. Shall comply with the applicable requirements in Sections 110.9, 130.0, 130.2, 130.4, 140.7, and 141.0.
§150.0(k)9: For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by Section 150.0(k)9B or
Section 150.0(k)9D shall comply with the applicable requirements in Sections 110.9, 130.0, 130.2, 130.4, 140.7, and 141.0.
§150.0(k)9D: Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall
comply with the applicable requirements in Sections 110.9 130.0, 130.2 130.4, 140.7 and 141.0.
§150.0(k)10: Internally illuminated address signs shall comply with Section 140.8; OR not contain a screw -base socket, and consume
no more than five wafts of power as determined according to §130.0(d).
§150.0(k)11: Lighting for residential parking garages for eight or more
vehicles shall comply with the applicable requirements for nonresidential garages in Sections 110.9, 130.0, 130.1,
130.4, 140.6, and 141.0.
§150.0(k)12A. In a low-rise multi -family residential building where the total interior common area in a single building equals 20 percent
or less of the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or
controlled by an occupant sensor.
§150.0(k)12B. In a low-rise multi -family residential building where the total interior common area in a single building equals more than
20 percent of the floor area, permanently installed lighting in that building shall:
i. Comply with the applicable requirements in Sections 110.9, 130.0, 130.1, 140.6, and 141.0; and
ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each
space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of
ingress and egress.
EnergyPro 6.3 by EnergySoft User Number: 5732 ID: LQ092914 Page 13 of 14
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
Project Name
MR. & MRS. JACKS'S RESIDENCE
Date
9/29/2014
System Name
HVAC System
Floor Area
2,781
ENGINEERING CHECKS
SYSTEM LOAD
Number of Systems 2
COIL
CFM
Total Room Loads 1,950
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation 0
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COOLING PEAK
COIL HTG.
PEAK
Heating System
Sensible
Latent CFM
Sensible
Output perSystem 0
37,884
3,334 719
27,501
Total Output Btuh 0
0
Output Btuh/s ft 0.0
2,585
1,586
Cooling System
0
0
Output perSystem 1
0
0 0
0
Total Output Btuh 2
0
3,334
0
Total Output ons 0.0
2,585
1,586
Total Output Btuh/s ft 0.0
Total Output s ft/Ton 16,686,000.0
1 43,055
1 30,674
Air System
CFM perSystem 0
HVAC EQUIPMENT SELECTION
Airflow cfm 0
Default FAU/AC 1992 - 2005 2
0
0
Airflow cfm/s ft 0.00
Airflow cfmfron 0.0
0
Jan 1 AM
Outside Air % 0.0%
Total Adjusted System Output 2 0
(Adjusted for Peak Design conditions)
TIME OF SYSTEM PEAK Aug 3P m
Outside Air cfm/s ft 0.00
Note: values above given at ARI conditions
HEATING SYSTEM PSYCHROMETRICS
Airstream Temperatures at Time of Heating Peak
26 OF 67 OF 105 OF
Outside Air
0 cfm Heating Coil
67 OF
LH
104 OF
r_............._._..............- ..._......._
ROOM
68 OF
COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak
112/78°F 77/63°F 55/54°F
Outside Air Ar
0 cfm Coolin
ITY OF LA QUINTA 48.8
77 / 63 FEMILDING & SAFETY DEPT.
AODR Q-\/F:n TFT
FOR CONSTFIUCTION I
1
57 / 55 OF
Roolw
75 / 62 OF
EnergyProl6.3 by EnergySoft User Number: 5732 unCode: 2014-09-2 9 705:42:25 ID: LQ092914
Page 14 of 14
Bin#
(,2
qrztz
La Quin is
Building &r Safety Division
P.O. Box 1504, 78-495 Calle TaMPIC0 -
L2 Quinta, CA 92253 - (760) 777-7012,
Building Permit Application and Tracking Sheet
Permit #
G(\�
Project Address:
-'Owner's Name' —A
A. P. Number:
"7
Legal Description:
City, ST,Zip:
Contractor:"_Telephone:
zac-e-
ruc7-,,o -I
;
Address: -,Alq 20 / SA Aj
J6 Se AVe ,
t Project Description:
City, ST, Zip: PA_
'T
0 XXO 0 -r,,
Telephone:
09
State Lic. #:
City Lie. #.-.
G1
_;�,U7,_fn—gr., Designer. AJri
A:& de Z_
-A 7d d —rc s7 3 od
0
71_t_Y,_�ST,Zip:
'Telcpbone: _1?1�9
. ... .......
Constru ction Type: Occupancy:
State Lie. #:
Project New Add'n Alter Repair Dem
type (circle one): 0
Name ofContact Person:
5-
Sq. Ft.:
# stories:
#Units:
Telephone #,of Contact Per -son:
Estimated Value of Project: gi-A
oo C
Submittal Reqld
APPLICANT: DO NOT WRITE BELOW THI& LINE
Rcc1d TRACKING PERMIT FEES
Plan Sets
Plan Check submitted
Li
Item
Amount
Structural Caics.
Z_
Reviewed, ready for corrections
Plan Check Deposit
Truss Cala.
Called Contact Person
Plan Check Balance.
Title 24 Cala.
Plans picked up
Construction
Flood plain plan
Plans resubmitted,/
Mechanical
Grading plan
Review, ready for corrccfion� �lssu
P
/7
Electrical
Subcontactor List
Called Contact Person
I
Plumbing
Grant Deed
-
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN IIOUSE:-
3" Review, ready for correctionslissuc
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees