BMCH2014-11361.
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Tity 4 4 Q"
COMMUNITY DEVELOPMENT DEPARTMENT
BUILDING PERMIT
Application Number: BMCH2O14-1136
Property Address: 57295 INTERLACHEN
APN: 762180004
Application Description: HVAC CHANGE OUT (2) 13.5SEER/78AFUE SPLIT SYSTEMS
Property Zoning:
Application Valuation: $18,464.00
Applicant:
HARRISON ENTERPRISES INC DBA G
31-170 RESERVE DRIVE STE A
THOUSAND PALMS, CA 92276
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: C20 License No.: 686310
Date:,_ Contractor:��
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3
of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(_) I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
�(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State license Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
( I I am exempt under Sec. B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Addre!
VOICE (760) 777-7125
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 11/5/2014
Owner:
WILLIAM HUTZLEY
Contractor:
HARRISON ENTERPRISES INC DBA G
31-170 RESERVE DRIVE STE A
THOUSAND PALMS, CA 92276
(760)343-7488
Llc. No.: 686310
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
cm— I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is'Issued. My workers' compensation insurance carrier and policy number are:
Carrier: Policy Number: _
_ I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
t �
Date: Il r) Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the above-
mentioned property for inspection purposes.
Date: IL lil Signature (Applicant or Agent): ��
o
zC5
�-
G1 N
� w
�
go
LL �
QO
W
O
U
Z
0
U
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
cm— I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is'Issued. My workers' compensation insurance carrier and policy number are:
Carrier: Policy Number: _
_ I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
t �
Date: Il r) Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees for any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the above-
mentioned property for inspection purposes.
Date: IL lil Signature (Applicant or Agent): ��
FINANCIAL INFORMATION
DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE
BSAS SB1473 FEE 101-0000-20306
0
$1.00 $0.00
PAID BY METHOD
- • RECEIPT # CHECK # CLTD BY
Total Paid forBUILDING STANDARDS ADMINISTRATION BSA $1.00 $0.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
HVAC CHANGEOUT - SPLIT -SYSTEM
101-0000-42402
0
$145.04
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
HVAC CHANGEOUT - SPLIT -SYSTEM PC
101-0000-42600
0
$72.52
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid forCHANGEOUT: $217.56 $0.00
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
PERMIT ISSUANCE
101-0000-42404
0
$91.85
$0.00
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
Total Paid for PERMIT ISSUANCE: $91.85 $0.00
TOTALS:00
PERMIT NUMBER
Permit Details
City of La Quinta BMCH2O141'136:
Description: HVAC CHANGE OUT (2) 13.5SEER/78AFUE SPLIT SYSTEMS
Type: MECHANICAL Subtype: Status: SUBMITTED
Applied: 11/5/2014 SKH
Approved:
Parcel No: 762180004 Site Address: 57295 INTERLACHEN LA QUINTA,CA 92253
Subdivision: TR 28410-2 Block: Lot: 36
Issued:
Lot Scl Ft: 0 Building Scl Ft: 0 Zoning:
Finaled:
Valuation: $18,464.00 Occupancy Type: Construction Type:
Expired:
No. Buildings: 0 No. Stories: 0 No. Unites: 0
Details: HVAC CHANGE OUT - 13.5SEER/78AFUE SPLIT SYSTEM [2013 ENERGY] CARBON MONOXIDE ALARMS) TO BE INSTALLED PRIOR TO
FINAL INSPECTION. 2013 CALIFORNIA BUILDING CODES.
CHRONOLOGY
CONDITIONS
CONTACTS
NAME TYPE
NAME
ADDRESSI
CITY
STATE
ZIP
PHONE -
FAX
EMAIL
APPLICANT
HARRISON ENTERPRISES INC DBA G
31-170 RESERVE DRIVE
STE A
THOUSAND
PALMS
CA
92276
(760)398-9698
CONTRACTOR
HARRISON ENTERPRISES INC DBA G
31-170 RESERVE DRIVE
STE A
THOUSAND
PALMS
CA
92276
(760)398-9698
OWNER
WILLIAM HUTZLEY
160 SHADOW WOOD
LN
CARBONDALE
CO
92253
(760)398-9698
FINANCIAL INFORMATION
Printed: Wednesday, November 05, 2014 1:27:50 PM 1 of 2 CN?I"SYSTEMS
PARENT PROJECTS
BOND INFORMATION
ATTACHMENTS
Printed: Wednesday, November 05, 2014 1:27:50 PM 2 of 2 Ci?srsTEMs
CLTD
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
RECEIPT #
CHECK #
METHOD
PAID BY
BY
BSAS SB1473 FEE
101-0000-20306
0
$1.00
1 $0.00
Total Paid forBUILDING STANDARDS ADMINISTRATION $1.00 $0.00
BSA:
HVAC CHANGEOUT -
101-0000-42402
0
$145.04
$0.00
SPLIT -SYSTEM
HVAC CHANGEOUT -
101-0000-42600
0
$72.52
$0.00
SPLIT -SYSTEM PC
Total Paid forCHANGEOUT: $217.56 $0.00
PERMIT ISSUANCE 7F
101-0000-42404
0
.$91.8S
$0.00
Total Paid forPERMIT ISSUANCE: $91.85 $0.00
TOTALS:•0
PARENT PROJECTS
BOND INFORMATION
ATTACHMENTS
Printed: Wednesday, November 05, 2014 1:27:50 PM 2 of 2 Ci?srsTEMs
QqT'M i GF2.
STA-rE OF CALIFORNIA
ALTERATIONS - HVAC
�l `i} J
CEC-CFIR-ALT-04-E Revised 06/14 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE CHR -ALT -04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Date Prepared:
Permit#:
sci -7 2q5 � 1n-�x c
C1 &Q
HIS11114
Equipment Type
Equipment Efficiency
New Ducting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged System
X Evaporator Coil
�AFUE
COP
❑ R-6 (CZ 2, 8-13) Ducting
Served by system
Setback
Split System
(Condensing Unit
❑ R-8' (CZ 11, 14, 15) Ducting
sgft
(If not already
❑ Mini Split
❑ Compressor
l3.S SEER
HSPF
❑ R-6 (all CZ's) Plenums
present must
Furnace
❑ Lineset
EER
❑ R-5 or R7.5) Lineset'
be installed)
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
]K 1. HVAC Changeout/Repair
Required Compliance Documents to be left on site for Final:
All Equipment,
CF111-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24)' -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (< 15%, or < 10% to outside, or seal all accessible leaks), Air Flow >_ 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if. -
f:❑
01. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building
❑ 2. New HVAC System Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts' CF1R-ALT-02-E
including Mini Split CF2R: MECH-01, MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
CF3R: MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Mini Splits require C171R-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement Required Compliance Documents to be left on site for Final:
All New Ducts' and one or more of the following CFIR-ALT-02-E
replaced: Condenser Unit, Evaporator Coil, CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace' CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: 111. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts' CFIR-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
Installer Required to: Duct leakage (< 15% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos.
' All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls, between floors etc.
' Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
' All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%", 2.5-3T-2'/.", 3.5 to 4T -2Y.", 5T -4%e"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR).
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Responsible Designer Name:
Sever sc
Responsible Designer Signature:
Date Signed:
License:
�,��
II S Imo+
X0$ 310
Company:
Address:
Cit /State/Zip:
Phone:
�ey\e a� - .
3l\%O 1�e
IH e 92z�
- c o-343-7ySPr
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300
STATE OF CALIFORNIA
ALTERATIONS - HVAC
CEC-CF1 R -ALT -04-E Revised 06114 CALIFORNIA ENERGY COMMISSION
CERTIFICATE OF COMPLIANCE CF1R-ALT-04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Date Prepared:
Permitil:
_
Zqs►_r-
C 6�
15
Equipment Type
Equipment Efficiency
New Ducting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged System
PK Evaporator Coil
-�,AFUE
COP
❑ R-6 (CZ 2, 8-13) Ducting
Served by system
Setback
Split System
)KCondensing Unit
❑ R-8' (CZ 11, 14, 15) Ducting
sgft
(If not already
❑ Mini Split
❑ Compressor
13. SEER
HSPFpresent
❑ R-6 (all CZ's) Plenums
must
'Furnace
❑Lineset
EER
❑ R-5 or R7.5) Lineset°
be installed)
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
JK 1. HVAC Changeout/Repair
Required Compliance Documents to be left on site for final:
All Equipment,
CF1R-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HEIRS, MECH-(23 or 24)' -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24)-HERS2, MECH-25-HERS'
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (< 15%, or < 10% to outside, or seal all accessible leaks), Air Flow >_ 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if:
❑ 1. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building -------- J
❑ 2. New HVAC System Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts' CF1R-ALT-02-E
including Mini Split CF2R: MECH-01, M ECH-20- HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
CF3R: MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Mini Splits require CF1R-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement Required Compliance Documents to be left on site for Final:
All New Ducts' and one or more of the following CF1R-ALT-02-E
replaced: Condenser Unit, Evaporator Coil, CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace' CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: ❑ 1. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts' CF1R-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
Installer Required to: Duct leakage (< 15% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos.
' All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls, between floors etc.
' Heating'only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
' All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
° R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%", 2.5-3T-2'/.", 3.5 to 4T-2%", 5T-4%"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR).
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Responsible Designer Name:
Si Sc
Responsible Designer Signature:
DatSigned:
License:
I
ever ex��sy
t1�S
God 3110
Company:
Address:
City/state/Zip:
Phone:
3iV7D
JV% 92zL
I`7N8-0
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300
sin.#
CitOf , Q[(Intd
Building sr Safety Division
P.O. Box 1504,78-495 Calle Tampico
La.Quinta, CA 92253 -:(760) 777-7012
Building Permit Application'and Tracking Sheet
Permit #
Project Addcess:J 2 5 .Ln�t'x ` G e h
Owner's Name:.
A. P. Number.
Address: .S 1295 5:;,N" etc
Legal Description:
.
City, 9� tT1G ST, Zip: 11 CA 9 225-
�
Contractor. EYIe -: : r
Telephone: -
Project Description:
Address: 31l1O e!U rVc be-
City, ST, Zip:
W VAC .
Telephone: -7(00-343--7q&,8
k C-ro S
State Lic. # : "3.10" City Lia #;
Arcfi, Eng., Designer.
Address:
City, ST, Zip:
Telephone:V '�:a
State Lic. #: ,rd
y ry
Name of Contact Person:Sq.
Construction Type: . Occupancy:
Project type circle one): New Add, n Alter Repair Demo
Ft.: #Stories: # Units:
Telephone # of Contact Person:Estimated
Value of Project -'i to� , CC>
APPLICANT: DO NOT WHITE BELOW THIS UNE
#
Submittal
Req'd
Recd
TRACMG
PERMrr FEES-
Plan Sets
Plan Check submitted
Item
Amount
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposit. .
Truss talcs-
Called Contact Person
Pian Check Balance
Title 24 Calci.
Plans picked up
Construction
Flood plain plan
Plans resubmitted..
Mechanical
Grading plan
tad Review, ready for correetionsrmue
Electrical
Subcoutactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
SALL
H.O.A. Approval
Plans resubmitted
Grading
M HOUSE.-
'"' Review; ready for correctionsfissae
Developer Impact Fee
Planning Approval
Called Contact Person
A.LP.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees