10-0591 (SOL)P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: c10=00000591',
Property Address: 78885 DESCANSO LN
APN: 646-350-015- -
Application description: SOLAR
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 3500
Applicant:-- -- - - - -- __ -
Tityl 4 4 a"
`Architect or Engineer
PIA
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business an 0 Professionals ode, and my License is in full force and effect.
License Class: C46 ense No.: 499505
at� — (% Contractor: "---�—
OWNER -BUILDER DECLARATION
I hereby affirm under penalt perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit -to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.). .
1 _ 1 I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERA1IT
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
�- Date: 7/01/10
Owner: T, 0.e
MASTER ASSN FOR RANCHO
48500 WASHINGTON ST r
LA QUINTA, CA 92253 !' jug � � 1 10 f i�
i
�.
t�
• 1. -. J r
Contractor: .... ... . ~ �•�:�T
ENERGY SERVICES
440 S. EL CIELO ROAD, #339
PALM SPRINGS, CA 92262
(760)778-1054
Lic. No.: 499505
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation .
insurance carrier and policy number are:
Carrier XEMPT Policy Number EXEMPT
' 1 certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the rkers' compensation provisions of Section
3700 of the Labor Code, I sh fo with comp) with those provisions.
��ate: pplicant:
WARNING: FAILURE TO SECURE W KERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRI AL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. gree to comply with all
city and county ordinances and state laws relating to building construction, and hereby xuthonze representatives
oft is county to enter upon the above-mentioned property fo sp ion purposes. -
Date:�� Si ture (Applicant or -Agent):
Application -Number . . . . . 10-00000591
Permit . . . ELEC-MISCELLANEOUS
Additional desc . .
Permit Fee . . . . 15.75 Plan Check'Fee
3.94
Issue Date Valuation
0
Expiration Date 12/28/10
Qty Unit Charge Per
Extension
BASE FEE
15:00
1.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20
-----------------7----------------------------------------------------------
.75
Permit . . . SOLAR PERMIT
desc
Permit Fee . . . . 19.50 Plan Check Fee
4.88
Issue -Date . . . . Valuation . . .
. 3500
Expiration Date 12/28/10
Qty Unit Charge Per
Extension
BASE FEE
15.00
_ 1.00 4.5000 EA SOLAR COLLECTOR < 1000
4.50' `
--------------------------------------------------------------
Special Notes and Comments
--------------
'
SOLAR POOL WATER HEATING SYSTEM - 40SF
COLLECTOR, ELECTRICAL CONTROL AND PIPING
TO EXISTING POOL PLUMBING. THIS PERMIT
DOES NOT INCLUDE ADDITIONAL OR
ALTERATION TO EXISTING POOL PUMP. 2007
CALIFORNIA BUILDING CODES.
July 1, 2010 12:14:45 PM AORTEGA
----------------------------------------------------------------7-----------
Other Fees . . . . . . . . . BLDG STDS ADMIN (SB1473)
1.00
Fee summary Charged Paid Credited
------------------------------
Due
---------------"------------
Permit Fee Total 35.25 .00 .00
35.25
Plan Check Total 8.82 .00 .00
8.82
Other Fee Total 1..00 .00 .00
1.00
Grand Total 45.07 .00 .00
45.07
LQPERAIIT
G(!VLEDLI __� bm
CONTROLS .INC.
The Recognized Technology LeaderVff
^ou AU . SOLAR
Total solar system control with digital display of pool
temperature and solar system temp erature. Plus, full
system diagnostic LED's. The Aqua Solar is set by a
single dial adjustment for desired pool temperature. The
Aqua Solar offers selectable high limit, programmable
recirculation freeze protection and nocturnal cooling to
customize any installation.
JON, QUIN, `S(:: LAf=;_T,C
s
The Aqua Solk.Time Glock Model -has all the features of the
Aqua Solar with`time clock for control of the swimming pools
main filter pump. -T he tirnwclock^is programmable in 15
minute increments and can have multiple ON/OFF times.
Exclusive solar override feature allows for maximizing solar
gain while minimizing electricity cost. True automation and
convenience.
GL -235
M
11
America's best selling solar control is designed for easy and depend-
able operation. The microprocessor based technology ensures reli-
ablity and accurate performance. The GL -235 offers advanced
features to provide differential temperature control, selectable high
limit, programmable recirculation freeze protection, nocturnal cooling
and optional booster pump control. The GL -235 can handle all
systems; old or new, pools & spas, 12 or 24VAC actuators.
All products are covered by Goldilne �, exclusive 5 year limited warranty*
`see warrantv statement for details
Actuator, diverter valve and 2 temperature
sensors are included in all Goldline Solar Comb
Goldline Controls is the leading supplier of solar
controls nationwide. Goldline also manufacture;
the Aqua Rite Electronic Chlorine Generator. Tt
Aqua Rite makes it's own chlorine from table sa
and keeps your pool's water sparkling. Ask your
pool professional about America's best selling
chlorine generator, the Aqua Rite.
UN flNTN
36�
l�[. EMPIRE SERIES SPECIFICATIONS
78 1/4'
3 1/4-
, ,9 9.70 •
17.30
.
60
'0.60
-. 0.51 =
.01,5
12
160
'39 3/4 -` 1- `
73 1/2:
EC/EP24
36
1/8 '
98 1/4
m 2
•'S �
•S " Cy a, a; � �
4
� C
`� 4
F O>
'� �+
�
2'0 � ,p
1-,
�.
a r°'
co'.cd7 a,Q r°i ti � ri �� v
p`' D
c c�
a rn &
¢~ ��
c�
�'� ;�
. c c\a
�2
�
a' l�. •
�.. c
a a. pF
�• �•
�� C
106
1..Q0 ..
166
018
12
160,
51 3/8� 1
y 935/8
EC/EP40
48
1/8
122 t/4
3 1/4
40.81
37.33
141
1.20'
O
g
Ix
X
ECLEP20
36�
f/8
78 1/4'
3 1/4-
, ,9 9.70 •
17.30
.
60
'0.60
-. 0.51 =
.01,5
12
160
'39 3/4 -` 1- `
73 1/2:
EC/EP24
36
1/8 '
98 1/4
3 1/4
24.61
21.88
E(.I44°F) ,
80
0.78
0.62
.017
.12
160
393/4 I
935/8
EC/EP32
C
48
1/8
98'1 /4
3,1/4
32.79
2
8
106
1..Q0 ..
0.83.
018
12
160,
51 3/8� 1
y 935/8
EC/EP40
48
1/8
122 t/4
3 1/4
40.81
37.33
141
1.20'
1.04
.020
12
160
51,3/8 1
1155/8
MODEL EC
THERMAL PERFORMANCE RATINGS*
MODEL EP
I
Btu/ftZ/Da
Category
(Ti -Ta)
Ti =inlet fluid temp
Ta=ambient air temp
CLEAR
.DAY
2000
Btu/ftZ/Day
MILDLY
CLOUDY DAY
1 500
Btu/ftZ/Day
CLOUDY
DAY
1000
Btu/ftZ/Day
A( -9°E)
1..332:
_1,005
----890 ---
— 680
`-
B(9°F)
1,218
2000 1 500
565
C(36°F) _-"-
-
__ _I;0-40fd
- ---
720
_ _ 402 _ -
D(90°F)
699
405
127
E(.I44°F) ,
T 390
137
--372. _ -
MODEL EP
A -Pool Heating (Warm Climate) B -Pool Heating C -Water Heating (Warm Climate) D -Water Heatina (Cool Climate) E -Air Conditioning/Industrial Process Heat.
Thermal performance is obtained by multiplying the collector output For the appropriate application and insolation level by the total gross collector area.
-Collector ratings are derived From the Solar Rating & Certification Corp (SRCC) Document RM -1 and Standard OG -100.
ENGINEERING SPECIFICATIONS
The following shall be the specifications for the solar collectors. Collectors
shall be SunEarth Empire model and shall be of the glazed liq-
uid flat plate type. Collectors shall be tested in conformance with ASHRAE
93-1986, and SRCC 100-81. The collectors also shall be certified by the
SRCC and the Florida Solar Energy Center (FSEC).
GENERAL
The dimensions of the collector shall be. inches in length,
inches in width and 3 1/4 inches in depth. The collector casing
shall be an anodized aluminum extrusion (alloy 6063 T5), minimum thick-
ness .060 inch, with an architectural dark bronze finish. The casing shall
have notched framewalls for ease of plate removal and reinstallation. Sheet
metal screwed fasteners shall be stainless steel (18-8 # 10). The backsheet
shall be painted textured aluminum not less than .014 inch thickness. A 1
inch vent plug shall be installed in each of the four corners of the backsheet
to minimize condensation.
GLAZING .
The collector glazing shall be one sheet of low iron tempered glass, with
a minimum of 1/8 inch thickness (5/32 inch on EP/EC 40), and a mini-
mum transmissivity of 91 percent (89 on EP/EC 40). The glazing shall be
thermally isolated from the casing by a continuous EPDM gasket. There
shall be a continuous secondary silicone seal between the glass and cas-
ing capstrip to minimize moisture from entering the casing.
INSULATION
The insulation shall be foil -faced polyisocyanurate foam sheathing board of
a minimum 1 inch thickness, siliconed in place to the aluminum backsheet,
covered by low -binder fiberglass of a minimum 1 inch thickness, providing
to change without notice. ;
MANUFACNRED BY: I AVAILABLE FROM:
SU�EflRTHII�.
4315 Santa Ana St. • Ontario, CA 91761
(909)605.5610 • Fax (909) 605.5613
(Performance specifications subject to testing erro,of +/- 3%)
thermal isolation of the foam from the absorber plate. Total thermal resis-
tance shall be a minimum of R-12. The sides and ends of the collector shall
be insulated with a minimum d'*1 inch foil -faced polyisocyanurate foam
sheathing board.
ABSORBER PLATE AND PIPING
The absorber shall consist of a roll -formed copper plate of no less than .008
inch thickness. Risers shall be a minimum of 112 inch O.D. Type M.Pper
tubing on no more than 4 1/2 inch centers continuously solderer f't ..f. �,,
plate utilizing a noncorrosive solder paste with a melting point of 460 F
The risers shall be brazed to 1 1/8 inch 0. D. Type M copper manifolds'uti-
lizing a copper phosphorous brazing alloy with no less than 15;tpercent sil-
ver content, and conforming to the American Welding Society's BCtPyS.clas .
sification. EPDM grommets shall isolate the manifold from the alum
casing. The absorber plate shall be designed for 160 psig maximum.oper-
ating pressure.
ABSORBER COATING AND PERFORMANCE CURVE
A) Black Chrome (EC Series): The absorber coating shall be black chrome on
nickel with a minimum absorptivity of 95 percent and a maximum emissiv-
ity of 12 percent. The instantaneous efficiency of, the collector shall be a
minimum Y -intercept of 0.714 and a slope of no less than -0.7271 ..
(BTU/ftZ-hr)/F
B) Moderately Selective Black Paint (EP Series): The absorber coating shall be
a moderately -selective black paint with a minimum absorptivity of 94 per-
cent and a maximum emissivity of 56 percent. The instantaneous efficiency
of the collector shall have a minimum Y -intercept of 0.682 and a slope of
no less than -0.7995 (BTU/ftZ-hr)/F
nth -Pound UnI .
--
t
Btu/ft2/Da
JO
Category
CLEAR MILDLY
CLOUDY
[Ti -Ta)
DAY CLOUDY DAY
DAY
n = inlet fluid temp
2000 1 500
1000
Ta = ambient air temp
Btu/ft2/Day Btu/ft2/Day
Btu/ftZ/Day
• q _9°F
1..284 971
659 . ,.
B 9°F
1,169 854
542
C 35°F ,
9847 677-` --
--372. _ -
D 90°F
619 343
89
TyE 144°F '.
280 62
- -
A -Pool Heating (Warm Climate) B -Pool Heating C -Water Heating (Warm Climate) D -Water Heatina (Cool Climate) E -Air Conditioning/Industrial Process Heat.
Thermal performance is obtained by multiplying the collector output For the appropriate application and insolation level by the total gross collector area.
-Collector ratings are derived From the Solar Rating & Certification Corp (SRCC) Document RM -1 and Standard OG -100.
ENGINEERING SPECIFICATIONS
The following shall be the specifications for the solar collectors. Collectors
shall be SunEarth Empire model and shall be of the glazed liq-
uid flat plate type. Collectors shall be tested in conformance with ASHRAE
93-1986, and SRCC 100-81. The collectors also shall be certified by the
SRCC and the Florida Solar Energy Center (FSEC).
GENERAL
The dimensions of the collector shall be. inches in length,
inches in width and 3 1/4 inches in depth. The collector casing
shall be an anodized aluminum extrusion (alloy 6063 T5), minimum thick-
ness .060 inch, with an architectural dark bronze finish. The casing shall
have notched framewalls for ease of plate removal and reinstallation. Sheet
metal screwed fasteners shall be stainless steel (18-8 # 10). The backsheet
shall be painted textured aluminum not less than .014 inch thickness. A 1
inch vent plug shall be installed in each of the four corners of the backsheet
to minimize condensation.
GLAZING .
The collector glazing shall be one sheet of low iron tempered glass, with
a minimum of 1/8 inch thickness (5/32 inch on EP/EC 40), and a mini-
mum transmissivity of 91 percent (89 on EP/EC 40). The glazing shall be
thermally isolated from the casing by a continuous EPDM gasket. There
shall be a continuous secondary silicone seal between the glass and cas-
ing capstrip to minimize moisture from entering the casing.
INSULATION
The insulation shall be foil -faced polyisocyanurate foam sheathing board of
a minimum 1 inch thickness, siliconed in place to the aluminum backsheet,
covered by low -binder fiberglass of a minimum 1 inch thickness, providing
to change without notice. ;
MANUFACNRED BY: I AVAILABLE FROM:
SU�EflRTHII�.
4315 Santa Ana St. • Ontario, CA 91761
(909)605.5610 • Fax (909) 605.5613
(Performance specifications subject to testing erro,of +/- 3%)
thermal isolation of the foam from the absorber plate. Total thermal resis-
tance shall be a minimum of R-12. The sides and ends of the collector shall
be insulated with a minimum d'*1 inch foil -faced polyisocyanurate foam
sheathing board.
ABSORBER PLATE AND PIPING
The absorber shall consist of a roll -formed copper plate of no less than .008
inch thickness. Risers shall be a minimum of 112 inch O.D. Type M.Pper
tubing on no more than 4 1/2 inch centers continuously solderer f't ..f. �,,
plate utilizing a noncorrosive solder paste with a melting point of 460 F
The risers shall be brazed to 1 1/8 inch 0. D. Type M copper manifolds'uti-
lizing a copper phosphorous brazing alloy with no less than 15;tpercent sil-
ver content, and conforming to the American Welding Society's BCtPyS.clas .
sification. EPDM grommets shall isolate the manifold from the alum
casing. The absorber plate shall be designed for 160 psig maximum.oper-
ating pressure.
ABSORBER COATING AND PERFORMANCE CURVE
A) Black Chrome (EC Series): The absorber coating shall be black chrome on
nickel with a minimum absorptivity of 95 percent and a maximum emissiv-
ity of 12 percent. The instantaneous efficiency of, the collector shall be a
minimum Y -intercept of 0.714 and a slope of no less than -0.7271 ..
(BTU/ftZ-hr)/F
B) Moderately Selective Black Paint (EP Series): The absorber coating shall be
a moderately -selective black paint with a minimum absorptivity of 94 per-
cent and a maximum emissivity of 56 percent. The instantaneous efficiency
of the collector shall have a minimum Y -intercept of 0.682 and a slope of
no less than -0.7995 (BTU/ftZ-hr)/F
-22M.
"ya`
JO
6
o
�
RECYCLED PAPER—SOY BASED INK
VACUUM RELIEF VALVE
SOLAR COLLECTORS
SOLAR SENSOR �
� /
VACUUM RELIEF VALVE
toa€io(a+ i6C2fStFs E3 CAP
INLET Ls`NE TO �.
SOLAR COL.LECTC OUTLET LEVE C
HERIMOMETER
(catianai�
VALVE s
CONTROL T. _
`tIS+dE ISOLATION CHECK VAL'
` (apstotsay
ISOLATIO'N OUTLET TEE
BALL VALVE
(vDtiana)p
HEATER BY-PASS
_ BALL VALVE
FILTER qee 3ssa,�
} f HEATER
VA tcr:t<.ra
'C:;L !WATER T
{
PUMP jqq%%¢} c� CITY ®F LA QUINTA.
t 'R 7 �. 1F � � ��y1.S3CR T t'� A i "r
�`� :BUILDING & .SAFETY DEPT. � �� ��T��
R HEATER P-PROVE� t� � C3=
Pcrwc S
POOL
7DATE. THERMOMETER DATE.
vFitC'A1f .. .
10•d9�t � Sra�l �rt��16►
7
ISIM5 bm4A450 We
LECTROMC CONTROL.
—
IM240 V LINE
•
4
Bin # City of La Qulnta
Building 81 Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012 1
_Building Permit Application and Tracking Sheet
Project Address: -722-7s A-vvc,�o l.,+ (Ruw Owner's Name: /LytytC(w 1,4 QvntJl.A- Rot4
A. P. Number: *M*..40 UV1 Address: 7 Z 7S lire bA 4u ra34 ,,P�
Legal Description: City, ST, Zip:. (-A- Q%/r�v
Contractor:
Address: L qw
City, ST, Zip: /� ►til y l 3 2z&
TelephonesY
:
State Lic. # : City Lic. #: q35�
Arch., Engr., Designer.
Address:
City, ST, Zip:
Project Description: S®
r
Telephone: Construction Type: Occupancy:
State Lic. #: Project type circle one New Add'n Alter Repair Demo
Name of Contact Person: J N �.4,p 5 y� �,... Sq. Ft.: # Stories: t# Units:
Telephone # of Contact Person: Estimated Value of Project: -5,5-&0
# Submittal
Plan Sets
Structural Cales.
Truss Cala.
Tide 24 Cala.
Flood plain plan
Grading plan
Subcontactor List
Grant Deed
M.O.A. Approval
IN HOUSE: -
Planning Approval
Pub. Wks. Appr
School Fees
APPLICANT: DO NOT WRITE BELOW THIS LINE
Recd
TRACKING PERMIT FEES
Plan Check submitted Item Amount
Reviewed, ready for corrections Plan Check Deposit
Called Contact Person Pian Check Balance
Plans picked up Construction '
Plans resubmitted Mechanical
2" Review, ready for corrections/issue ArElectrical
Called Contact Person Plumbing
Plans picked up S.M.I.
Plans resubmitted Grading
Review, ready for corrections/issueDeveloper Impact Fee
Called Contact Person I.P.P.
Date of permit issue
I� Total Permit Fees
06/29/2010 04:35. 9092472798 JMG PAGE 01
1
POOL 1 c-
-/A-n-'J mhlA-S-o-LA
lo•� �'f � QK OAP- S�T�NO WAY ✓
Io•o�,+ge �.� 14V 4 VA AT LINA ✓
1 fs• o54D_, , , f 7 C _� .RII-tom WAY
LANE
In-0542 DRNE"
05
Ib.-OS43 -,�J7NH A QUINTA DR VEV✓
7971 M�cal[�N DRIVE Wim'`
Ip-o54'� '�
7995; . pANC QUINT DRIVE I/
WI_IAto-o59S `�
POOL 7
014
POOL 9
4�
l ---- POOL 6
61L
POOL, 4
aµ"
POOL. $
OIL-
ILPOOL
POOL5
OP