07-2223 (RER)P,O. BOX 1504
*78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number:
Property Address:
APN:
Application description:
Property Zoning:
Application valuation:
Applicant:
07-00002223
52855 AVENIDA DIAZ
773-311-028-9 -000000-
REMODEL - RESIDENTIAL
COVE RESIDENTIAL
28843
T419� 4 4 Q"
Architect or Engineer:
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
----------------------------------------------------
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
License Class: License No.:
Date: Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_ 1 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projectswitha contractor(s) licensed
pursuant to the Contractors' State License Law.l.
1 I I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name: _
Lender's Address:
LQPERA11T
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 8/02/07
Owner:
BARBARA L. KLINE
52-855 AVENIDA DIAZ
LA QUINTA, CA 92253
Other struct info . . . . . C
Contractor: s
p l u
Owner
AU
G 0-22007
DITION 2
€ liitiYl�
------------------
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier - - - - - - - - - - - - - - - - - - - - - -- Policy Number
I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the workers' compensation provisions of Section
/�L/�3,7700 of the Labor Code�rthwith co I��ithh those provisions.
Date: -� Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,0001. IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county ordinances and state laws relating to building construction, and hereby authorize representatives
ofthis county to enter upon the above-mentioned propertor inspec 'on purpos s.
Date: Signature (Applicant or Agent):
Application Number . . . . . 07-00002223
Permit .
. . BUILDING PERMIT INV FEE
Additional desc
. .
Permit Fee . .
. . 556.00
Plan Check Fee
180.70
Issue Date . .
. .
Valuation . . . .
28843
Expiration Date
1/29/08
Qty Unit
Charge. Per
Extension
BASE
FEE
504.00
4.00 13.0000
----------------------------------------------------------------------------
THOU BLDG
25,001-50,000
52.00
Permit .
. . ELECT - ADD/ALT/REM
Additional desc
.
Permit Fee
65.09
Plan Check Fee
16.27
Issue Date
Valuation . . . .
0
Expiration Date
1/29/08
Qty Unit
Charge Per
Extension
BASE
FEE
15.00
1431.00
----------------------------------------------------------------------------
.0350 ELEC
NEW RES - 1 OR 2 FAMILY
50.09
Permit .
. . MECHANICAL
Additional desc
.
Permit Fee
. . 52.50
Plan Check Fee
13.13
Issue Date
Valuation . . . .
0
Expiration Date
1/29/08
Qty Unit
Charge
Extension
_Per
BASE
FEE
15.00
1.00
9.0000 EA MECH
FURNACE <=100K
9.00.
1.00
9.0000 EA MECH
B/C <=3HP/100K BTU
9.00
2.00
6.5000 EA MECH
VENT FAN
13.00
1.00
----------------------------------------------------------------------------
6.5000 EA MECH
EXHAUST HOOD
6.50
Permit .
. . PLUMBING
Additional desc
.
Permit Fee . .
. . 66.00
Plan Check Fee
16.50
Issue Date . .
. .
Valuation ..
0
Expiration Date
1/29/08
Qty, Unit
Charge Per
Extension
BASE
FEE
15.00
8.00
6.0000 EA PLB
FIXTURE
48.00
1.00-
3.0000 EA PLB WATER INST/ALT/REP
3.00
----------------------------------------------------------------------------
Special Notes and
Comments
CODE CASE WORK
PERFORMED WITHOUT
LQPERINfIT
LQPERAIIT
Application Number . . . . . 07-00002223.
------------------------------------------------------------------------
Special Notes and Comments
PERMITS. INTERIOR REMODEL AND PATIO
CONVERSION TO LIVING SPACE. 242 SQ.
FT/.PERMIT WAS CHARGED DOUBLE FEE.
------------------------------------------------------------------------
Other Fees . . . . . . ENERGY REVIEW FEE 18.07
STRONG MOTION (SMI) - RES 2.88
Fee summary
Charged
---------- ----------
Paid
Credited
---------- ----------
Due
-----------------
Permit Fee Total
739.59
.00
.00
739.59
Plan Check Total
226.60
.00
.00
226.60
Other Fee Total
20.95
.00
.00
20.95
Grand Total
987.14
00
.00.
987.14
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/Walkways, residential additions under 5
00 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile ho
mes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 242 S.F. or $0.00 have been paid for the property listed above and that
building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued.
Fees Paid By Exempt - Barbara Klein Check No.
Name on the check- Telephone
Fubdibg Exempt
By Dr. Doris Wilson
Superintendent
Fee collected /exempted by S a o c ilvrey Payment Recd '; $0.00 " -il
;Over/Under
Signature
NOTICE: Pursuant to Government Code Section 66020(d)(1), thisserve to notify you that the 90 -day approval period in which you may protest the fees o
r other payment identified above Will begin to run from the date on which the building or installation permit for this project is issued, or from the date on which
those amounts are paid to the District(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID if Duplicated
Embossed Original - Building DepartmenUApplicant Copy - Applicant/Receipt Copy - Accounting
Bin #
City of. La Quinta.
Building U Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application* and Tracking Sheet
P mit #
K12
�] 2Z
Projec s:' SOL. -'b A VeA J0- . Is ea 3.
Owner's.Name: 1�AR(3�214 (,. , k lam►'
A. P. Number: " ( - 3 i l -0;L6
Address: 15a - 13 SS -A Vevx (c1G,_ 6i'cL
+34 amore M/i .1N WTS 1, 8'd °I
Legal Description: % m B CO 9 0
Ci ST, Zip:
City, p Lo- vL�G�- aa�
SAn+ic. C--me-li o.. Valli L.62•
Contractor:
Telephone: -
Address:
Project Description:
City, ST; Zip:4
l7 S �- AOaf S
Telephone:
State Lic
City Lic. #:
U �,
Arch., Eng., Designer:
EhcA0 d Pct o
Address: - F. R&� •y
ap cAa � .
City, ST, Zip: 25 1:-9,Llq
Telephone:
State Lic. #:
�y j11 Rr2k. Soft
Name of Co ct Person: 3. AUSA"
242
Construction Type: Occupancy:
Project type (circle one): New Add'n lter Repair Demo
Sq. Ft:: I a 0 0 #Stories: f #Units: I
Telephone # of Contact Person:
Estimated Value of Project: � jrj Opo 00
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Recd
TRACKING.
PERMIT FEES
Plan Sets
Plan Check submittedulot
Item
Amount
Structural Calcs.
Reviewed, ready for corrections
Plan Check Deposit
Truss Cale&
Called Contact Person
Plan Check Balance
Energy Calcs.
Plans picked up
% 0
Construction
Flood plain plan
Plans resubmitted
Mechanical
Grading, plan
god Review, ready for correctionslssue
Electrical
Subcontactor List
Called Contact Person -o Uv
Plumbing
Grant Deed
Plans picked up 1665 ti0 Aw)5G+
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading.
IN HOUSE:-
Review, ready for correctionsrssue
Developer Impact Fee
Planning Approval
Called Contact Person
`
A.I.P.P.
Pub. Wks. Appr
Date of permit issue
f+
'
School Fees
Total Permit Fees
� 1'L1'�� •r-^ _= /��
7 t4o� �Ca� Rte- -�_ - "I��
TELEPHONE (760) 777-7012 FAX (760) 777-7011
OWNERBUILDER INFORMATION
Dear Property Owner:
An application for a building permit has been submitted in your name listing yourself as the builder of the property
improvements specified.
For your protection you should be aware .that as "Owner/Builder" you are the responsible party of record on such a
permit. Building permits are not required to be signed by property owners unless they are personally performing their
own work. If your work is being performed by someone other than yourself, you may protect yourself from possible
liability if that person applies for the proper permit in his or her name. .
Contractors are required by law to be licensed and bonded by the State of California and to have a business license
from the City or County. They are also required by law to put their license number on all permits for which they
apply.
If you plan to do your own work, with the exception of various trades that you plan to subcontract, you should be
aware of the following information for your benefit and protection.
If you employ or otherwise engage any persons other than your immediate family, and the work (including materials
and other costs) is $200.00 or more for the entire project, and such persons are not licensed as contractors or
subcontractors, then you may be an employer.
If you are an employer, you must register with the State and Federal Government as an employer and you are subject
to several obligations include State and Federal income tax withholding, federal social security taxes, worker's
compensation insurance, disability insurance costs and unemployment compensation contributions.
There may be financial risks for you if you do not carry out these obligations, and these risks are especially serious with
respect to worker's compensation insurance.
For more specific information about your obligations under Federal Law, contact the Internal Revenue Service (and, if
you wish, the U.S. Small Business Administration). For more specific information about your obligations under State
Law, contact the Department of Benefit Payments and the Division of Industrial Accidents.
If the structure is intended for sale, property owners who are not licensed contractors are'allowed to perform their
work personally or through their own employees, without a licensed contractor or subcontractor, only under limited
conditions.
A frequent practice of unlicensed persons professing to be contractors is to secure an "Owner/Builder" building
permit, erroneously implying that the property owner is providing his or her own labor and material personally.
Building permits are not required to be signed by property owners unless they are performing their own work
personally.
Information about licensed contractors may be obtained by contacting the Contractors' State License Board in your
community or at 1020 N. Street, Sacramento, California 95814.
Please complete and return the enclosed owner -builder verification form so that we can confirm that you are aware of
these matters. The building permit will not be issued until the verification is returned.
Very truly yours,
CITY OF LA QUINTA
DEPT. OF BUILDING AND SAFETY
78-495 Calle Tampico
La Quinta, CA 92253
(760) 777-7012
FAX: (760) 777-7011
id 0,7
OWNER'S GNAT RE/DATE
is 7 /'dr,
PROPERTY ADDRESS
PERMIT NUMBER(S)
FUDream Engineering, Inc.
JUL Consulting Electrical Engineers
7 zoos
2700 N. Little Mountain Dr. Suite G-105
San Bernardino, CA 92405
T: 909.475.9900
F: 909.475.882a
72330 Canyon Lane
5 Palm Desert, CA 92260
T: 760.773.4478
F: 760.773.4999
www.dreameng.com
TITLE 24, OCTOBER 2005 ENERGY EFFICIENCY STANDARDS PACKAGE
FOR LOW RISE RESIDENTIAL BUILDINGS
KLEIN WINDOW ALTERATION
1,431 SQ. FT. — N O C hG r4e it)
7/9/07 Sq, Fogxfu,ge.
Energy Budgets for this building were determined using the ENERGY PRO 4.3 certified by the California
Energy Commission. The EnergyPro analysis attached was conducted using tables from the Residential
Manual for Compliance With the Energy Efficiency Standards (for Low Rise Residential Buildings)
OCTOBER 2005, certified by the California Energy Commission.
*** HOUSE COMPLIES ***
I hereby certify that the California Energy Commission Conservation Division regulations establishing
Energy Efficiency Standards for Residential Buildings, Title -24, Part 6, have been reviewed and the design
submitted substantially complies with these regulations.
Joseph M. Nolan
fodeA� X, Z&O
Electrical Engineer
ATTACHMENTS:
#1 - C -F1 R
#3 - Calculation Work Sheet - Existing � (����T�
S, ` #4 - Calculation Work Sheet - Composite CI� �F FEN pEQT.
#6 - FORM J Heating and Cooling Calculations 11U LDING' �` S®��®
#7 - MF -1R Mandatory Measures Checklist: Residential
#13 - CF -6R Installation Certificate P®P ONST UCTION
FOR '
#9 — Title 24 Residential Requirements for all Permanently Installed L minanes (--�
K:Imsoffice\WINWORDITITLE 241Cover SheetslEX+ADD 2005 No Eng. BudgetdocTITLE 24 - RESIDENTIAL
PAGE -1
TITLE 24 REPORT
Title 24 Report for:
Barbara Klein
52-855 Avenida Diaz
` La Quinta, CA 92253
Project Designer:
Report Prepared By:
Debra L Zamora
Dream Engineering, Inc
2700 N. Little Mountain Drive, #G-105
San Bernardino, CA 92405
(909) 475-9900
Job Number:
Date:
7/25/2007
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.3 by EnergySoft Job Number: User Number: 6496
TABLE OF CONTENTS
Cover Page
Table of Contents
Form CF -1 R Certificate of Compliance
Form MF -1 R Mandatory Measures Summary
Form WS -5R Residential Kitchen_ Lighting
1
2
3
8
10
EnergyPro
4.3 by EnergySoft Job Number: User Number: 6496
Certificate Of Compliance:
Residential
(Part 1 of 3) CF -1 R
Barbara Kle6n
Project Title
7/25/2007
Date
52-8-55 Avenida niaz
I aQuinta
Project Address
Building Permit #
nrAam FnainPPrina
Inc
(909) 475-9900
Doc umentatlon Author
Telephone
Plan Check/Date
BneraVPrn
Complrddce Method
15
Climate Zone
Field Check/Date
TDV
Standard
Proposed
Compliance
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
18.12
13.46
4.65
Space Cooling
209.76
213.42
-3.66
Fans
31.09
27.68
3.41
Domestic Hot Water
14.32
14.32
0.00
Pumps
0.00
0.00
0.00
Totals
273.28
268.88
4.40
Building Type: W Single Family
❑ Multi Family
Building Front Orientation:
Fuel Type:
Fenestration:
❑ Addition
Q Existing + Add/Alt
(E) 90 deg
Natural Gas
Area: 499 ft2 Avg. U: 0.79
Ratio: 34.9% Avg. SHGC: 0.54
BUILDING ZONE INFORMATION
Zone Name Floor Area Volume
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay. Cont. Azm. Tilt
Wall Wnnd 171 _0 35A Nnne R_p n 0 _cap
Door— None 20 0 rinn Nppe_ R_n n _0 90
Wail Wnnd 260 n '15A NonP R-0 0 270 A
Wail Wnnd 162 0 3-158y Nnne g_n n 1R0 90
Wall— Wnnd 184 n 35 Mope R40 0 _gn An
DpoL Nnne 20 0 600 Anne_ R-0 0 9f) gQ
Door None 20 p 5nn None R_n n — An 9II
nnnr None 2n n 5nn None R-0 d —9D _SII
Raaf Wnnd 1 d31 0 07c) X11 R_0 0 _Q_ n
Total Conditioned Floor Area:
Existing Floor Area:
Raised Floor Area:
Slab on Grade Area:
Average Ceiling Height:
Number of Dwelling Units:
Number of Stories:
# of
Units
Thermostat
Zone Type Type
rondifioned Setback
1,431 ft2
1,431 ft2
0 ft2
1,431 ft2
8.0 ft
1.00
1
Vent
Hgt. Area
—2 n/a
Gains Condition
Y / N Status JA IV Reference Location / Comments
Run Initiation Time: 0712510711:48:20 Run Code: 1185389300
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number: Page:3 of 10
I
Certificate Of Compliance: Residential (Part 2 of 3) CF -1 R
Barbara Klein 7/25/2007
Project Title Date
FENESTRATION SURFACES
' True Cond. Location/
# Type Area LI -Factor" SHIS Azm. Tilt Stat. Glazing Type Comments
J__
2
Window Right
Existing
(N)
R 0 0 in NFRC X33 NERC 1_ X0 -Altered Andersen 2
1.280 116-A 0_80 116-6 Single Metal Clear
7nne 1
pre -altered for above
3--
Window Right
(N)
6.0 0.30 NFRC 0_33 NFRC 0 90 Altered Andersen 2
Zone 1
4
Existing
11
1.280 116-A 0_80 116-B Single Metal Clear
pre -altered for above
-5--
Window Right
(N)
12.0 0.300 NFRC 0_33 NFRC 0 90 Altered Andersen 2
Zone 1
�
existing
Screen
1.280 116 A 0.80 116-8 Single Metal Clear
pre -altered for above
L
8
Window Right
Existing
()w
12.0 0.300 NFRC JU3 NFRC 0 _2D_ Altered Andersen 2
1.280 116-A 0_80 116-6 Single Metal Clear
Zone 1
pre -altered for above
2__
JD
Window Right
Window Right
(N)
(N)
110.0 1.280 116-A 0.80 116-B 0 -,(Q- RemovedSingle Metal Clear
15.0 1.280 116-A 0.80 116-8 0 __Q RemovedSinale Metal Clear
Zone 1
Zone 1
11
12
Window Right
Window Right
(N)
(N)
6.0 1.280 116-A 0.80 116-8 0 90 RemovedSingle Metal Clear
6.0 1.28 . 116-A0 80 116-8 0 90 RemovegQingle Metal Clear
Zone 1
Zone 1
-1a
jA
Window Right
Window Right
(N)
(N)
200 1.280 116-A 0.80 116-8 0 _ n Removed%ngle Metal Clear
110.0 1.280 116-A 0_80 116-8 0 90 Existing Single Metal Clear
Zone 1
Zone 1
15
Window Right
(N)
15.0 1.280 116-A 0_80 116-B 0 90 Existing Single Metal Clear
Zone 1
1S
17
Window Right
Window Right
(N)
lN)
6.0 1.280 116-A 0.80 116-8 0 90 Existing Single Metal Clear
6.0 1.280 116-A 0_80 11FwR 0 90 Existing Single Metal Clear
Zone 1
Zone 1
18
Window Right
(N)
20.0 1.280 116-A 0_80 116-8 0 90 Existing Single Metal Clear
Zone 1
_IR
Window Rear
(ly)
6.0 0.320 NFRC 0.28 NFRC 270 __c9LAltered Andersen
Zone 1
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B.
INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin
# Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len.
Right Fin
Hgt. Dist. Len. Hgt.
1
Buq Screen
0.76
3 Bug Screen 0.76
5 Bug Screen 0.76
7
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Tome: 07/25107 11:48:20 Run Code: 1185389300
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number. Page:4 of 10
Bug
Screen
0.76
9
Bug
Screen
0.76
10
Bug
Screen
0.76
11
Bug
Screen
0.76
12
Bug
Screen
0.76
13
Bug
Screen
0.76
14
Bug
Screen
0.76
15
Bug
Screen
0.76
16
Bug
Screen
0.76
17
Bug
Screen
0.76
18
Bug
Screen
0.76
19
Bug
screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Tome: 07/25107 11:48:20 Run Code: 1185389300
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number. Page:4 of 10
Certificate Of Compliance : Residential (Part 2 of 3) CF -1 R
Barbara Klein 7/25/2007
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U -Factor' SHGC2 Azm. Tilt Stat. Glazing Type Comments
2f).
Existing
1 2H0 11 S -A _Q10 _111P -R
Single Metal CIPar
nre-altered for abova
21
Window Rear (W)
12.0 0.320 NFRC 00^28 NFRC
270 90 Altered Andersen
Zone 1
22
Existing
1.28 116-A 0.80 116-6
Single Metal Clear
ore -altered for above
23
Window Rear (W)
6.0 1.280 116-A 0_80 116-6
270 90 RemovedSingle Metal Clear
Zone 1
24.
Window Rear (W)
6.0 1.280 116-A0.80 116-6
270 90 Existing Single Metal Clear
Zone 1
2a
Window Left (S)
64.7 0_320 NFRC 0_28 NFRC _ 190 90 Altered Andersen
Zone 1
2fi
27
Existing
Window Left (S)
1280 116-A 0_80. 116-8
33.0 0.320 NFRC 0.28 NFRC
Single Metal Clear
180 90 Altered Andersen
pre -altered for above
Zone 1
2$
M
Existing
Window Lek (S)
1.280 116-A 0_80 116-B Single Metal Clear
64.7 0.320 NFRC 0_28 NFRC 180 _a Altered Andersen
ple-altered for above
lone 1
.M
Existing
1.280 116-A 0_80 116-8
Single Metal Clear
rare -altered for above
31
Window . Left (S)
20.0.. 1_280 116-A Q.$.0 116-B
180 90 RemovedSingle Metal Clear
Zone 1
33
Window Left (S)
Window Left (S)
20.0 1280 116-A -DM 116-8 180 SIO_ RemovedSingle Metal Clear
20.0 1.280 116-A ^0080 116-8 180 90 RemovedSingle Metal Clear
Zone 1
Zone 1
34
Window Left (S)
20.0 1.280 116-A 0680 116-B
180 90 Existing Single Metal Clear
Zone 1
35
Window Left (S)
20.0 1.280 116-A 0_80 116-B
180 90 Existing Single Metal Clear
Zone 1
Window Left (S)
20.0 1.280 116-A 0_80 11&g
180 90 Existing Single Metal Clear
Zone 1
Window Front (E)
36.0 0.320 NFRC 00_28 NFRC
90 90 Altered Andersen
Zone 1
$
Existing
1.280 116-A 0=80 116-B
Single Metal Clear
ire -altered for above
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin
# Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. RExt. Dist. Len.
Right Fin
Hgt. Dist. Len. Hgt.
21
23
24
25
Bug Screen
Bug Screen
Bug Screen
Bug Screen
0.76
0.76
0.76
0.76
27
Bug
Screen
0.76
29
Bug
Screen
0.76
31
Bug
Screen
0.76
32
Bug
Screen
0.76
33
Bug
Screen
0.76
34
Bug
Screen
0.76
35
Bug
Screen
0.76
36
Bug
Screen
0.76
37
Bug
Screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sfl (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Times f2 Code:
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number. Page:5 of 10
Certificate Of Compliance: Residential (Part 2 of 3) CF -1 R
Barbara Klein 7/25/2007
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U -Factor' SHGC2 Azm. Tilt Stat. Glazing Type Comments
M Window Front 4E 94 0 1 2R 116 -A _QM 115-6 An _9Q_ RemnvPdSin9le M -tal r1oar 7nnP 1
40 Window Front (E) 24.0 1.280 116-A 0_80 116-8 90 90 Existing Single Metal Clear Zone 1
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING -Window Overhang Left Fin Right Fin
# Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len. Hgt. Dist. Len. Hgt.
39 Bug Screen 0.76
40 Bug Screen 0.76
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside 1 Condition Location/
Type (so (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Times 07/25/0711.48.20 Run Code: 1185389300
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number: Page:6 of 10
Certificate Of Compliance : Residential (Part 3 of 3) CF -1 R
Barbara Klein 7/25/2007
Project Title Date
_ HVAC SYSTEMS
Heating Minimum Cooling Minimum Condition Thermostat
Location Type Eff Type Eff Status Type
System 1 Central Furnace 75% AFUE Split Air Conditioner 8.0 SEER New Setback
HVAC DISTRIBUTION
Duct Duct Condition Ducts
Location Heating Cooling Location R -Value Status Tested?
System 1 Ducted Ducted Attic 4.2 New No
Hydronic Piping Pipe . Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS Rated
Tank
Energy
Tank Insul.
Water Heater # in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext.
Standard Gas 50 gal or Less Small Gas No Pipe Insulation 1 40,000
50
Existing 0.57
n/a n/a
Multi -Family Central Water Heating Details
Hot Water Pump Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Title/Firm:
,Address:
Telephone:
(signature)
Enforcement Agency
Name:
Title/Finn:
Address:
Telephone:
Lic. #:
Documentation Author
Name: Debra L Zamora
Title/Firm: Dream Engineering, Inc
Address: 2700 N. Little Mountain Drive, #G-105
San Bernardino, CA 92405
(date)
(signature) (date)
6496
JUAN A.
G
.ARAUJO
�
MMB
*
EXP. 12/31/07
(signature) (date)
6496
Calculation Work Sheet
27000.10% Houm nOr.
perimeter
167.0
Slab
1,431.0
Area
1,431.0
IaZI
2.252.4
NEW
avers coiling MIM
8.0
Composite
27000.10% Houm nOr.
GLAZING
sem. o-�nA cw srz4a+
H
r.SV
finai0eo* Iao.
A73..KU
P: W9A]S.tla2tl
C-- 4
ConorlNng HlecMo91 Engl-
NEW
� ..�•,
72330 0.0- L-
028
Pnbn Dost, CA 92260
7:760.773."7b
+
RIGHT
vH1:20i1(.-
.dneante0y.00m
FRONT EAS
HEIGHT
GLAZING
WALL AREA
H
NEW
W H AREA
u
ae
NEW
6.0 6.0 36.0
0.32
028
TO 13E ALTERED
6.0 4.0 24.0
RIGHT
48.0
DREAM 38.0
5.0 . 4.0 20.0
LEFT (SOLITH1
HEIGHT
8.0
WALL AREA
H
NEW
FRONT
35.5
284.0
LEFT
48.0
384.0
BACK
35.5
284.0
RIGHT
48.0
354.0
5.0 . 4.0 20.0
1,338.0
LEFT (SOLITH1
1 162.41 1 1
SKYLIGHTS
GLAZING
W H AREA
u
sc
H
NEW
9.8 6.6 64.7
0.32
0.28
NEW
5.0 6.6 33.0
0.32
0.28
0.33•
9.8 6.6 64.7
0.32
0.28
TO BE REMOVED
5.0 . 4.0 20.0
4.0 1.5 8.0
5.0 4.0 20.0
4.0 1.5 8.0
5.0 4.0 20.0
5.0 3.0 15.0
1 162.41 1 1
SKYLIGHTS
CODE
W
H
AREA
u
ac
NONE
NEW
0.30 0.33
4.0 1.5 6.0
0.30
0.33•
TOTAL I - I I I
BACK (WEST)
GLAZING
H
I AREA
FRONT
NEW WEST
TO BE REMOVED
FRONT
NEW WEST
W H AREA
8.0 1.5 12.0
u
0.32
sc
0.28
NEW
0.30 0.33
4.0 1.5 6.0
0.30
0.33•
TO BE REMOVED
4.0 1.5 6.0
0.30 0.33
TO BE REMOVED •
IiLai��l
ODORS
W
H
I AREA
FRONT
NEW WEST
TO BE REMOVED
FRONT
NEW WEST
3.0
3.0
3.0
3.0
6.7
6.7
6.7
6.7
20.1
20.1
20.1
20.1
4.0 1.5 6.0
0.30 0.33
TOTAL 1 40.21
RIGHT (NORTH)
GLAZING
W H AREA
4.0 1.5 6.0
u sc
0.30 0.33
NEW
4.0 1.5 6.0
0.30 0.33
8.0 1.5 12.0
0.30 0.33
8.0 1.5 12.0
0.30 0.33
TO BE REMOVED •
5.0 4.0 20.0
4.0 1.5 8.0
4.0 1.5 8.0
5.0 3.0 15.0
5.0 22.0 110.0
38.0
0.30 0.33
perimeter
167.0
Slab
1,431.0
Area
1,431.0
Iazin
247.0
avers a cellin hel ht
8.0
Calculation Work Sheet Existing
FRONT EAST
HEIGHT
GLAZING
W H AREA
6.0 4.0 24.0
u
Sc
CODE
DREAM 24.0
LEFT
48.0
Dnl�m HnOM��1np. Ina.
ConaltY�p Hbearlol InDY�rt•
Own Bwn3Mnq CA WYOp
r: coa.�7e.0000
P: aou.�>e.eeze
7]330 Gnypn V,r
~ P�Im Cewn, CA Y33O0
5
T. 7-773-70
00.773.<000
✓�- wwwAnrn�n0.0an
LEFT SOUTH
HEIGHT
8.0
WALL AREA
FRONT
35.5
284.0
LEFT
48.0
384.0
BACK
35.5
284.0
RIGHT
48.0
384.0
4.0 1.5 6.0
1,336.0
Dnl�m HnOM��1np. Ina.
ConaltY�p Hbearlol InDY�rt•
Own Bwn3Mnq CA WYOp
r: coa.�7e.0000
P: aou.�>e.eeze
7]330 Gnypn V,r
~ P�Im Cewn, CA Y33O0
5
T. 7-773-70
00.773.<000
✓�- wwwAnrn�n0.0an
LEFT SOUTH
CODE
GLAZING
W H AREA
u
sc
CODE
Sc
5.0 4.0 20.0
20.1
20.1
5.0 4.0 20.0
4.0 1.5 6.0
TOTAL
5.0 4.0 20.0
4.0 1.5 6.0
80.0
5.0 3.0 15.0
SKYLIGHTS
CODE
I W
I H
AREA
u
Sc
6.7
6.7
20.1
20.1
4.0 1.5 6.0
TOTAL
4.0 1.5 6.0
BACK S
CODE
GLAZING
W H AREA
4.0 1.5 6.0
u-
sc
CODE
DOORS
CODE
W
H
AREA
FRONT
BACK
3.0
3.0
6.7
6.7
20.1
20.1
TOTAL I 40.21
RIGHT NORTH
GLAZING
W H AREA
u
SC
CODE
5.0 4.0 20.0
4.0 1.5 6.0
4.0 1.5 6.0
5.0 3.0 15.0
5.0 22.0 110.0
1 157.01 1 1
AM ASJMM�
Dream Engineering, Inc.
Consulting Electrical Engineers
5.�,.
2700 N. I..ittle Mountain Dr.
suite o-105
San Bernardino, CA 92405
T: 909.475.9900
F: 909.475.8828
72330 Canyon Lane
Palm Desert, CA 92260
T: 760.773.4478
F: 760.773.4999
www.dreamens.com
FORM J EQUIPMENT LOADS
PROJECT:
25 BTU/SQ FT
DREAM ENGINEERING INC.
72330 CANYON LANE
KLEIN RESIDENCE
1431 SQ FT
PALM DESERT, CA
(760)773-4478/F242-1092
LA QUINTA
CA HTM
HTM .
AREA/
BTU
BTU
NUMBER OF FLOORS
1
CLG
HTG
LENGTH
CLG
HTG
EXPOSED WALL (SQ FT)
1336
GROSS EXPOSED WALLS
FOOTPRINT - PERIMETER (FT)
167
FIXED WINDOWS
34
0
0
0
BUILDING DIMENSIONS (SQ FT)
1431
SLIDING WINDOWS
35
252
0
8706
CEILING HEIGHT (FT)
8.0
WINDOWS &
NORTH 30
36
1080
DIRECTION FACING
EAST
GLASS DOORS:
EAST 80
36
2880
LOCATION LA QUINTA
SOUTH 45
162
7306
SUMMER DESIGN OUTDOOR - 78
112
WEST 80
18
1440
WINTER DESIGN OUTDOOR - 68
24
SKY LIGHTS
0
48
0
0
0
UBC 50% OCCUPANCY
N/A
OPAQUE DOORS
38
25
40
1520
1000
DISCLAIMER:
NET EXPOSED WALL
R13 1.9
1.80
1336
2538
2405
1.THE BUILDING HEAT LOSS & RESULTING MAXIMUM HEATING
AVE CEILINGS
R19 1.860
1.73
1431
2662
2470
EQUIPMENT OUTPUT CALCULATIONS IN THIS REPORT MEET THE
CEILINGS (R#2)
0
0
CRITERIA OF TITLE 24. THIS MAXIMUM MAY BE EXCEEDED
FLOOR (SLAB - PERIMETER)
0
28
167
0
4726
WHEN THE FURNACE IN THE SELECTED PRODUCT LINE MUST BE
FLOOR (RAISED FLOOR)
0
0
0
0
LARGER TO MEET COOLING LOAD AIR FLOW REQUIREMENTS.
SUBTOTAL BTUH LOSS
19307
2.THE BUILDING SENSIBLE HEAT GAIN CALCULATED IN THIS
DUCT BTUH LOSS (15%)
-
2317
REPORT MEETS THE CRITERIA OF TITLE 24 AND MAY BE
HEATING: TOTAL BUTH LOSS
21624
USED BY THE MECHANICAL CONTRACTOR IN EQUIPMENT
PEOPLE & APPLIANCES
1200
SELECTION AND SYSTEM DESIGN. THE ARI STANDARD 210
SENSIBLE BTU GAIN
20626
RATED CAPACITY OF THE EQUIPMENT SELECTED MAY NEED
DUCT BTU GAIN (15%)
3094
TO BE HIGHER THAN THAT STATED IN THE CALCULATIONS
SUM OF SENSIBLE AND DUCT GAINS
23720
BECAUSE THE DESIGN CONDITIONS FOR THE LOCATION ARE
COOLING: TOTAL BTUH GAIN (TOTAL X 1.3)
30836
DIFFERENT FROM THE TEST CONDITIONS USED IN THE RATINGS.
HTG UNIT SIZING =
BTUH LOSS X 1.3 + 10
X AREA =
42421 BTU HEATING OUTPUT, MINIMUM REQUIRED
CLG UNIT SIZING =
BTUH GAIN X 1.15
=
35462 BTU COOLING SENSIBLE, MINIMUM REQUIRED
3.0 TON
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or Initial applicable boxes or check NA If not applicable and Included with the
permit application documentation.
N/A
DESIGNER
ENFORCE -
MENT
Building Envelope Measures
❑
❑
❑
.§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
❑X
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
•§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
❑
❑
❑
•§ 150(d): Minimum R-13 raised floor insulation in framed Floors or equivalent U -factor.
❑
Q
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
❑
❑
❑
1. Masonry and factory -built fireplaces have:
❑
❑
❑
a. closable metal or'glass door covering the entire opening of the firebox
❑
❑
❑
b. outside air intake with damper and control, flue damper and control
❑
❑
❑
2. No continuous burning gas pilot lights allowed.
❑
❑
❑
§ 150(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perrnfinch.
❑
❑
❑
§ 118: Insulation specked or installed meets insulation installation quality standards. Indicate type and include
❑
❑
❑
CF -6R Form:
❑
❑
❑
§ 116.17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
❑
❑X
❑
Coefficient (SHGC), and infiltration certification.
3. Exterior doors and windows weatherstripped: all joints and penetrations caulked and sealed.
❑
❑
❑
(Space Conditioning, Water Heating and'Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACOA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-8 and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number:
Page:8 of 110
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent
compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated
into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory
measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or Initial applicable boxes when completed or check NIA If not
ENFORCE -
applicable.
N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,
❑ ❑ ❑
605, and Standard 6-5; supply -air and retum-air ducts and plenums are insulated to a minumum installed level of
R4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh
or tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than
❑ ❑ ❑
sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and
support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause
reductions in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with Goth back rubber adhesive
❑ ❑ ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers.
❑ ❑ ❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑ ❑ ❑
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑ ❑ ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ ❑ ❑
§ 114: Pool and Spa Heating Systems and Equipment
• 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
❑ ❑ ❑
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ❑ ❑
b. Cover for outdoor pools or outdoor spas.
❑ ❑ ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑ ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ❑ ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ❑ ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are
electric and have an output frequency no less than 20 kHz.
§ 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ ❑ ❑
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑ ❑ ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑ ❑
OR are controlled by an occupant sensor(s) ceded to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are
❑ ❑ ❑
controlled by an occupant sensor that complies with Section tZl9(d) that does not tum on automatically or have an
always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑ ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ ❑ ❑
same lot shall be high efficacy luminaires (not including lighting around swimming pools/Water features or other Article
680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section
119(d).
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number:
Page:9 of 10
Residential Kitchen Lighting Worksheet WS -5R
Barbara Klein 7/25/2007
Project Title tate
At least 50% of the total rated wattage of permanently Installed luminaires In kitchens must be In luminaires that are high efficacy luminaires
as defined In Table 150-C. Luminaires that are not high efficacy must be switched separately.
Kitchen Lighting Schedule. Provide the following Information for all luminaires to be installed In kitchens.
High Efficacy
Luminaire Type High Efficacy? Watts Quantity Watts Other Watts
(1) 60w Fluorescent Can Yes X No 65.0 x 5 = 325 or
20w Low Voltage Halogen Mag Yes No X 24.0 x 6 = or 144
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes I No I x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes9No
x = or
Yes x = or
Yes x = or
Yes x = or
Total A: 325 B: 144
COMPLIES IF A Z B YES ® NO ❑
EnergyPro 4.3 by EnergySoft User Number: 6496 Job Number. Page:10 of 10
INSTALLATION CERTIFICATE (Page 1 of 12) CF -6R
Site Address Permit Number
Installation certificates (CF -6R) are required for each and every dwelling unit. When the installation of measures that require
field verification and diagnostic testing is complete, the builder or the builder's subcontractor shall complete diagnostic
testing and the procedures specified in this section. When the installation is complete, the builder or the builder's
subcontractor shall complete the CF -6R (Installation Certificate), and keep it at the building site for review by the building
department. The builder also shall provide a copy of the Installation Certificate to the HERS rater for any measures requiring
field verification and diagnostic testing, per Section 10-103(a).
WATER HEATING SYSTEMS:
Distribution
CEC Certified Type
Heater Mfr Name & (Std, Point-
Type Model Number of --Use etc)
if # of Rated Input External
Recirculation, Identical (kW or Tank Volume Efficiency Standby Insulation
Control Type Systems BnjAr)l(gallons) (EF, RE)2 Loss (-/ 2 R -value
1 For small gas storage (rated input of less than or equal to 75,000 Btu/hr), electric resistance and heat pump water
heaters, list Energy Factor (EF). For large gas storage water heaters (rated input of greater than 75,000 Btu/hr), list
Recovery (RE), Thermal Efficiency, Standby Loss and Rated Input. For instantaneous gas water heaters, list Thermal
Efficiency and Rated Input.
2. R-12 external insulation is mandatory for storage water heaters with an energy factor of less than 0.58.
Kitchen Piping:
If indicated on the CF -1 R, all hot water piping >_ 3/4 inches in diameter that runs from the hot water source to the kitchen
fixtures is insulated.
Faucets & Shower Heads:
All faucets and showerheads installed are certified to the Energy Commission, pursuant to Title 24, Part 6, Section 111.
Central Water Heating in Buildings with Multiple Dwelling Units (required for prescriptive)
❑All hot water piping in main circulating loop is insulated to requirements of § 1500)
❑Central hot water systems serving six or fewer dwelling units which have (1) less than 25' of distribution piping.
outdoors; (2) zero distribution piping underground; (3) no recirculation pump; and (4) insulation on distribution piping
that meets the requirements of Section 1500)
13 Central hot water systems serving more than 6 dwelling units - presence of either a time control or a time/temperature
control
✓ ❑ 1, the undersigned, verify that equipment listed above my signature is: 1) the actual equipment installed; 2)
equivalent to or more efficient than that specified in the certificate of compliance (Form CF- I R) submitted for compliance
with the Energy Efficiency Standards for residential buildings; and 3) equipment that meets or exceeds the appropriate
requirements for manufactured devices (from the Appliance Efficiency Regulations or Part 6), where applicable.
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature: Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms September 2005
INSTALLATION CERTIFICATE (Page 2 of 12) CF±
Site Address Permit Number
An installation certificate is required to be posted at the building site or made available for all appropriate inspections. (The
information provided on this form is required) After completion of final inspection, a copy must be provided to the building
department (upon request) and the building owner at occupancy, per Section 10-103(a).
FENESTRATION/GLAZING:
Item
Manufacturer/Brand
Name
(GROUP LIKE
RODUCTS
Total
I t Quantity of Area Exterior
Product U -factor Product SHGC # of Like Product Square Shading Device Comments/Location/
S CF -I R value 2 SCF -1 R value) Panes O tion . Feet or Overhang S ial Features
1.
••
General Contractor (Co. Name) OR Owner
2.
OR Window Distributor
3.
Signature Date
Installing Subcontractor (Co. Name) OR
4. .
General Contractor (Co. Name) OR Owner
5.
OR Window Distributor
6.
Signature Date
Installing Subcontractor (Co. Name) OR
7.
General Contractor (Co. Name) OR Owner
8.
-
OR Window Distributor
9.
10.
11.
12:
13.
14.
15.
�I Use values from a fenestration product's NFRC label. For fenestration products without an NFRC label, use the default
values from Section 116 of the Energy Efficiency Standards.
2) Installed U -factor must be less than or equal to values from CF -1 R. Installed SHGC must be less than or equal to values
from CF- I R, or a shading device (exterior or overhang) is installed as specified on the CF -I R. Alternatively, installed -
weighted average U -factors for the total fenestration area are less than or equal to values from CF -1 R. If using default table
SHGC values from § 116 identify whether tinted or not.
✓ ❑ 1, the undersigned, verify that the fenestration/glazing listed above my signature: 1) is the actual fenestration
product installed; 2) is equivalent to or has a lower U -factor and lower SHGC than that specified in the certificate of
compliance (Form CF -IR) submitted for compliance with the Energy Efficiency Standards for residential buildings; and
3) the product meets or exceeds the appropriate requirements for manufactured devices (from Part 6), where applicable.
Item #s
Signature Date
Installing Subcontractor (Co. Name) OR.
(if applicable)
General Contractor (Co. Name) OR Owner
OR Window Distributor
Item #s
Signature Date
Installing Subcontractor (Co. Name) OR
(if applicable)
General Contractor (Co. Name) OR Owner
OR Window Distributor
Item #s
Signature Date
Installing Subcontractor (Co. Name) OR
(if applicable)
General Contractor (Co. Name) OR Owner
OR Window Distributor
Copies to: Building Department, HERS Rater (if applicable) Building Owner at Occupancy
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE (Page 3 of 12) CF -6R
Site Address Permit Number
An instal lation.certificate is required to be posted at the building site or made available for all appropriate inspections. (The
information provided on this form is required) After completion of final inspection, a copy must be provided to the building
department (upon request) and the building owner at occupancy, per Section 10-103(a).
HVAC SYSTEMS:
Heating Equipment
Equip Type
(pkg. heat um
CEC Certified Mfr.
Name and Model
Number
# of
Identical
S stems
Efficiencyi
(AFUE, etc.)
2CF-IR value
Duct
Location
attic etc.
Duct or
Piping
R -value
Heating
Load
Btu/hr
Heating
Capacity
Btu/hr
Cooling Equipment
Equip Type
(pkg. heat um
CEC Certified Mfr.
Name and Model
Number
# of
Identical
Systems
Efficiency1
(SEER or EER)
ZCF-I R value
Duct
Location
attic etc.
, Duct
R -value
Cooling
Load
Btu/hr
Cooling
Capacity
Btu/hr
1. > symbol reads greater than or equal to what is indicated on the CF -IR value.
Include both SEER and EER if compliance credit for high EER air conditioner is claimed.
✓ 011, the undersigned, verify that equipment listed above is: 1) is the actual equipment installed, 2) equivalent to or
more efficient than that specified in the certificate of compliance (Form CF -IR) submitted for compliance with the
Energy Efficiency Standards for residential buildings, and 3) equipment that meets or exceeds the appropriate
requirements for manufactured devices (from the Appliance Efficiency Regulations or Part 6), where applicable.
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature: Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE (Page 4 of 12) CF -6R
Site Address Permit Number
INSTALLER COMPLIANCE STATEMENT FOR DUCT LEAKAGE
INSTALLER COMPLIANCE STATEMENT
The building was: ✓ ❑Tested at Final ✓ ❑ Tested at Rough -in
INSTALLER VISUAL INSPECTION AT FINAL CONSTRUCTION STAGE FOR NEW DUCTS:
❑ Remove at least one supply and one return register, and verify that the spaces between the register boot and the interior finishing
wall are properly sealed.
❑ If the house rough -in duct leakage test was conducted without an air handler installed, inspect "rinection points between the
air handler and the supply and return plenums to verify that the connection points are properly d.
❑ Inspect all joints to ensure that no cloth backed rubber adhesive duct tape is used on new ducts.
✓ ❑ DUCT LEAKAGE REDUCTION
Procedures for field verification and diagnostic testing of air distribution systems are available in RACM, Appendix RC4.3
NEW CONSTRUCTION:
Duct Pressurization Test Results (CFM @ 25 Pa)
Measured
".
Values
1
Enter Tested Leakage Flow in CFM:
s
As's,
Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓ ❑ Measured
2
If Fan Flow is Calculated as 400 cfm/ton x number of tons or as 21.7 cfm/(kBtu/hr) x Heating
Capacity in Thousands of Bt — nter total cal(— d or measured fan flow in CF — e:
Pass if Leakage Percentage < �o for Final or < o at Rough -in without air handle:
✓ ✓
3
❑ Pass ❑ Fail
100 x Line # 1 / Line #2)11
ALTERATIONS:
Duct System and/or HVA uipment Change -Out
;
Enter Tested Leakage Flow in CFM fromt—VTest of Existing Duct System Prior to Duct
4
System Alteration and/or Equipment Change -Out.]
Enter. Tested Leakage Flow in CFM from Final Test of New Duct System or Altered Duct
5
System for Duct System Alteration and/or Equipment Change -Out.
{. � �"
Enter Reduction in Leakage for Altered Duct System
6
Line # 4 Minus Line # 5 –(Only if Applicable)
7
Enter Tested Leakage Flow in CFM to Outside (Only if —' able)
✓ ✓
Entire New Duct System - Pass if Leakage Percentage < o for Final.
13 Pass ❑Fail
8
100 x Line # 5 / Line # 2)11
TEST OR VERIFICATION ST DARDS: For Altered Duct System and/or HVAC Equipment Change-
✓
Out Use one of the following fo - st or Verification Standards for compliance:
9
Pass if Leakage Percentage < 15% [100 (Line # 5) / (Line # 2)]]
❑ Pass E)Fail
10
Pass if Leakage to Outside Percentage — [ 100 x L— (Line # 7) / (Line # 2)]]
❑ Pass ❑ Fail
Pass if Leakage Reduction Percentage > /o [100 x [—(Line # 6) / (Line # 4)]]
13 Pass ❑Fail
11
and Verification b Smoke Test and Visual Inspection
12
Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual Inspection
e
❑ Pass ❑ Fail
Pass if One of Lines # 9 through # 12 pass
, r
❑ Pass ❑ Fait
✓ ❑I, the undersigned, verify that the above diagnostic test results were performed in conformance with the requirements for compliance
credit. 1, the undersigned, also certify that the newly installed or retrofit Air -Distribution System Ducts, Plenums and Fans comply with
Mandatory requirements specified in Section 150 (m) of the 2005 Building Energy Efficiency standards.
Installing Subcontractor (Co. Name) OR General Contractor (Co. Name) OR Owner
Signature: Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms December 2005
INSTALLATION CERTIFICATE (Page 5 of 12) CF -6R
Site Address Permit Number
✓ ❑ THERMOSTATIC EXPANSION VALVE (TXV)
Procedures for field verification of thermostatic expansion valves are available in RACM, Appendix Rl.
✓ ❑ REFRIGERANT CHARGE MEASUREMENT
Verification for Required Refrigerant Charge and Adequate Airflow for Split System Space Cooling Systems without
Thermostatic Expansion Valves
Outdoor Unit Serial #
Access is provided for inspection. The procedure shall
Location
OF
Outdoor Unit Make
consist of visual verification that the TXV is installed on
Outdoor Unit Model
OF
✓ 13 Yes ❑ No
the system and installation of the specific equipment ❑
❑
OF
Date of Refrigerant Gauge Calibration
shall be verified.
Date of Thermocouple Calibration
(must be checked monthly)
Yes is a eass I Pass
I Fail
✓ ❑ REFRIGERANT CHARGE MEASUREMENT
Verification for Required Refrigerant Charge and Adequate Airflow for Split System Space Cooling Systems without
Thermostatic Expansion Valves
Outdoor Unit Serial #
OF
Location
OF
Outdoor Unit Make
OF
Outdoor Unit Model
OF
Cooling Capacity
Btulhr
Date of Verification
OF
Date of Refrigerant Gauge Calibration
(must be checked monthly)
Date of Thermocouple Calibration
(must be checked monthly)
Standard Charge Measurement Procedure (outdoor air dry-bulb 55°F and above):
Procedures for Determining Refrigerant Charge using the Standard Method are available in RA CM, Appendix RD2.
Note: The system should be installed and charged in accordance with the manufacturer's specifications before starting this
procedure.
Measured Temperatures
Supply (evaporator leaving) air dry-bulb temperature (Tsupply, db)
OF
Return (evaporator entering) air dry-bulb temperature (Tretum, db)
OF
Return (evaporator entering) air wet -bulb temperature (Tretum, wb)
OF
Evaporator saturation temperature (Tevaporator, sat)
OF
Suction line temperature (Tsuction, db)
OF
Condenser (entering) air dry-bulb temperature (Tcondenser, db)
OF
Superheat Charee Method Calculations for Refrieerant Charee
Actual Superheat = Tsuction, db — Tevaporator, sat
°F
Target Superheat (from Table RD -2)
°F
Actual Superheat — Target Superheat (System passes if between -5 and +5°F)
°F
Temperature Split Method Calculations for Adequate Airflow
S lit Method Calculation is not necessary i Ade uate Air ow credit is taken
Actual Temperature Split = T return, db Tsupply, db
OF
Target Temperature Split (from Table RD3)
OF
Actual Temperature Split Target Temperature Split (System passes if between -
OF
3°F and +3°F or, upon remeasurement if between -3°F and -100°F
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE (Page 6 of 12) CF -6R
Site Address Permit Number
Standard Charge Measurement Summary:
System shall pass both refrigerant charge and adequate airflow calculation criteria from the same
measurements. If corrective actions were taken, both criteria must be remeasured and recalculated.
✓ ❑ Yes 13 No I System Passes
Alternate Charge Measurement Procedure (outdoor air dry-bulb below 55 °F)
Note: The system should be installed and charged in accordance with the manufacturer's specifications and installer
verification shall be documented on CF -6R before starting this procedure. If outdoor air dry-bulb is 55 OF or above, installer
shall use the Standard Charge Measure Procedure:
Procedures for Determining Refrigerant Charge using the Alternate Method are available in RACM, Appendix RD3.
Weieh-ln Chareine Method for Refrigerant Charge
Actual liquid line length: ft
Manufacturer's Standard liquid line length: ft.
Difference (Actual — Standard): ft
Manufacturer's correction (ounces per foot) x difference in length = ounces
(+ = add) (- = remove)
Aeasured Airflow Method for Adequate Airflow Verification available in RACM, Appendix RD2.6
Calculated Airflow: Cooling Capacity (Btu/hr) X 0.033 (cfm/Btu-hr) = CFM
Measured Airflow is CFM (Measured airflow must be greater than the calculated airflow).
Alternate Charge Measurement Summary:
System shall pass both refrigerant charge and adequate airflow calculation criteria from the same measurements. If
corrective actions were taken both criteria must be remeasured and recalculated.
✓ ❑ Yes ❑ No S stem Passes "
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature: Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms April 2005
• INSTALLATION CERTIFICATE (Page 7 of 12) CF -6R
Site Address Permit Number
MISCELLANEOUS CREDITS
✓ ❑ DIAGNOSTIC SUPPLY DUCT LOCATION, SURFACE AREA AND R -VALUE
Procedures for field verification and diagnostic testing for this group compliance credits are available in RACM, Appendix RC, RE & RH.
✓ ❑ LESS THAN 12 LINEAL FEET OF SUPPLY DUCT OUTSIDE OF CONDITIONED SPACE
COMPLIANCE CREDIT
✓ I ❑Yes I ❑No I Less than 12 lineal feet of supply duct outside of conditioned space.
Yes to this compliance credit is a pass I ✓ ❑ Pass T ✓ ❑ Fail
✓ ❑ SUPPLY DUCTS LOCATED IN CONDITIONED SPACE COMPLIANCE CREDIT
✓ ❑ Yes 10 No Ducts are located within the conditioned volume of building.
Yes to this compliance credit is a pass ✓ ❑ Pass ✓ ❑ Fail
Duct System Design verification is required for a compliance credit for the following:
1. Supply duct surface area reduction
2. Buried supply ducts on the ceiling
3. Deeply buried supply ducts
✓ ❑ DUCT SYSTEM DESIGN VERIFICATION
✓
❑ Yes
❑ No
Adequate airflow verified
✓
❑ Yes
❑ No
The duct system design plan meets the requirements specified in RACM, Appendix RE, Section
RE.4.2
✓
❑ Yes
❑ No
The duct system design plan exists on building plans
✓
❑ Yes
❑ No
Duct sizes, duct system layout and locations of supply & return registers match the duct system
design plan
Yes to all is a pass I ✓ ❑ Pass r7ffFail
✓ ❑ SUPPLY DUCTS SURFACE AREA REDUCTION COMPLIANCE CREDIT
Attic
Crawl
Space
Basement Covered
Deeply
Covered
R-4.2
Duct Surface
Other Diameter Area
R-6.0 R-8.0
Surface Surface
Area Area
✓
✓
FJ
C[
[
❑Pass
❑
n
n
n
n
C'
❑
n ❑ I
n
n
n
n
5 ❑
n
n
F.
n
n a
n
n
P
U
D
0
19
Total Surface Area for Each R -Value =
✓ 0 Yes I U No tches Performance's CF -1 R?
✓ ✓
Yes to all is a pass
0 Pass
✓ ❑ Ri1RIF.D DUCTS ON THE CEILING COMPLIANCE CREDIT
✓ ❑ DF.F.PIN RIIRIF.D DUCTS CnMPL1ANCF. CREDIT
❑ Yes
❑ No Buried Ducts on the Ceiling
Deeply Buried Ducts
❑ Yes
❑ No Verified High Insulation Installation Quality
✓
✓
Yes to ducts stem design, supply duct surface area reduction and this compliance credit is a pass
❑ Pass
❑ Fail
✓ ❑ DF.F.PIN RIIRIF.D DUCTS CnMPL1ANCF. CREDIT
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms
April 2003
❑ Yes
❑ No
Deeply Buried Ducts
❑ Yes
❑ No
Verified High Insulation Installation Quality
✓
✓
Yes to ducts stem design, supply duct surface area reduction and this com liance credit is a pass
❑Pass
[]Fail
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms
April 2003
INSTALLATION CERTIFICATE
(Page 8 of 12) CF -6R
Site Address
Permit Number
A3FAN WATT DRAW
Procedures or measuring the air handler watt draw are available in RACM, Appendix RE3.2.
✓ Method For Fan Watt Draw Measurement
❑ RE3.2.1 Portable Watt Meter Measurement
❑ RE3.2.2 Utility Revenue Meter Measurement
Measured Fan Watt Draw
Measured Fan Flow enter total cfm from airflow verification
Enter results of Watts/cfm
❑
RE4.1.1
Diagnostic Fan Flow Using
✓ ❑ Yes
❑ No
Measured fan watt/cfm draw is equal to or lower than the
fan watt/cfm draw documented in CF -1 R ❑
❑
Dia nostic Fan Flow Using
Plenum Pressure Matching
Yes is a pass I Pass
Fail
13, ADEQUATE AIRFLOW VERIFICATION
Prncedures fnr measuring the airllnw are availahle in RACM_ Annendix RE3_ i.
✓ Method For Airflow Measurement
2
❑
RE4.1.1
Diagnostic Fan Flow Using
Flow Capture Hood
❑
RE4.1.2
Dia nostic Fan Flow Using
Plenum Pressure Matching
Duct leakage reduction credit verified
Cooling capacities of installed systems are <_ to maximum cooling
capacity indicated on the Performance's CF -1R and RF -3.
❑ RE4:1.3 Diagnostic Fan Flow Using
Flow Grid Measurement
❑ Yes ❑ No Duct design exists on plans
❑ No
.
5
✓
Measured Airflow:
0 No
If the cooling capacities of installed systems are > than maximum ✓ ✓
cooling capacity in the CF -IR, then the electrical input,for the
installed systems must be _5 to electrical input in the CF -IR. ❑ ❑
Rated Tons cfm/ton
✓❑ HIGH EER AIR CONDITIONER
Procedures for veri ication are available in RA CM, Appendix R1.
1 ✓ ❑ Yes ❑ No EER values of installed systems match the CF -I R
✓ ❑ Yes
❑ No
Measured airflow is greater than the criteria in Table RE -2
✓ ✓
Yes to 1 and 2; and 3 If Re uired is a pass Pass Fail
Yes is a pass
❑
Pass
❑
Fail
Watts
cfm
Watts/cfm
✓
Total cfm
cfm/ton
✓ ❑ MAXIMUM COOLING CAPACITY
Procedures or det ining maximum cooling load capacity are available in RA CM, Appendix RF3.
1 ✓ ❑ Yes ❑ No Adequate airflow verified (see adequate airflow credit)
2
✓
❑ Yes
❑ No
Refrigerant charge or TXV
3
✓
13 Yes
❑ No
Duct leakage reduction credit verified
Cooling capacities of installed systems are <_ to maximum cooling
capacity indicated on the Performance's CF -1R and RF -3.
4
✓
❑Yes
❑ No
.
5
✓
❑ Yes
0 No
If the cooling capacities of installed systems are > than maximum ✓ ✓
cooling capacity in the CF -IR, then the electrical input,for the
installed systems must be _5 to electrical input in the CF -IR. ❑ ❑
Yes to 1 2 and 3• and Yes to either 4 or 5 is a pass Pass Fail
✓❑ HIGH EER AIR CONDITIONER
Procedures for veri ication are available in RA CM, Appendix R1.
1 ✓ ❑ Yes ❑ No EER values of installed systems match the CF -I R
2 ✓ ❑ Yes ❑ No Fors lits stem, indoor coil is matched to outdoor coil ✓ ✓
3 ✓ ❑ Yes ❑ No Time Delay Relay Verified (If Required) ❑ ❑
Yes to 1 and 2; and 3 If Re uired is a pass Pass Fail
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature: Date:
copies to: BUILUINU DLI'AK I ML' N I, HLKJ KA I LKkir Arrwt,Ai i n) aUILWI-4tr V W INr K A I vt_t_vrArgt, i
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE (Page 9 of 12) CF -6R
Site Address I Permit Number
An installation certificate is required to be posted at the building site or made available for all appropriate inspections. (The
information provided on this form is required)After completion of final inspection, a copy must be provided to the building
department (upon request) and the building owner at occupancy, per Section 10-103(a).
BUILDING ENVELOPE LEAKAGE DIAGNOSTICS
✓.❑ ENVELOPE SEALING INFILTRATION REDUCTION
Procedures for field verification and diagnostic testing of envelope leakage are available in RA CM, Appendix RC.
Diagnostic T ting Results
✓
✓
Building Envelope Leakage CFM @ 50 Pa) as measured by Rater:
1
❑
❑
Measured envelope leakage less than or equal to the required level from
Yes
No
CF- I R?
❑
❑
2.
Is Mechanical Ventilation shown as required on the CF -1 R?
Yes
No
2a
❑
❑
I If Mechanical Ventilation is required on the CF -1R (`Yes' in line 2), has it
Yes
No
been installed?
1:1
13
Check this box `yes' if mechanical ventilation is required (`Yes' in line 2)
Check
2b.
ventilation fan watts are no greater than shown on CF -I R.
Yes
. No
Measured Watts =
[3
[1
Check this box "yes" if measured building infiltration (CFM @ 50 Pa) is
Check
3.
than the CFM @ 50 values shown for an SLA of 1.5 on CF -1 R
Yes
No
If this box is checked no mechanical ventilation is required.)
Check this box "yes" if measured building infiltration (CFM @ 50 Pa) is
4.
El
less than the CFM @ 50 values shown for an SLA of 1.5 on CF -1R,
Yes
No
mechanical ventilation is installed and house pressure is greater than minus
5 Pascal with all exhaust fans operating.
Pass if:
a. Yes in line I and line 3, or
✓
✓
b. Yes in line 1 and line2, 2a, and 2b, or
c. Yes in line 1 and Yes in line 4.
❑
❑
Otherwise fail.
Pass
Fail
✓ ❑ I, the undersigned, verify that the building envelope leakage meets the requirements claimed for building leakage
reduction below default assumptions as used for compliance on the CF -IR. This is to certify that the above diagnostic test
results and the work I performed associated with the test(s) is in conformance with the requirements for compliance credit.
(The builder shall provide the HERS provider a copy of the CF -6R signed by the builder employees or subcontractors
certifying that diagnostic testing and installation meet the requirements for compliance credit.)
Test Performed
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature:
Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE), BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE
(Page 10 of 12) CF -6R
Site Address
Permit Number
Insulation Installation Quality Certificate
✓ ❑ Description of Insulation, (CF -6R, formerly IC -1) signed by the installer stating: insulation manufacturer's name,
material identification, installed R -values, and for loose -fill insulation: minimum weight per square foot and minimum
inches
✓ ❑ Installation meets all applicable requirements as specified in the High Quality Insulation Installation Procedures
(ACM, Appendix RH)
✓ FLOOR
❑
Yes
❑
No
❑
NA
All floor joist cavity insulation installed to uniformly fit the cavity side-to-side and end-to-end
❑
Yes
❑
No
❑
NA
Insulation in contact with the subfloor or rim joists insulated '
❑
Yes
❑
No
❑
NA
Insulation properly supported to avoid gaps, voids, and compression
✓ WALLS
❑
❑
❑
Wall stud cavities caulked or foamed to provide an air tight envelope
Yes
No
NA
❑
Yes
❑
No
❑
NA
Wall stud cavity insulation uniformly fills the cavity side-to-side, top -to -bottom, and front -to -back
❑
❑
❑
No gaps
Yes
I No
NA
❑
Yes
❑
No
❑
NA
No voids over 3/4" deep or more than 10% of the batt surface area.
❑
❑
❑
Hard to access wall stud cavities such as; comer channels, wall intersections, and behind
Yes
No
NA
tub/shower enclosures insulated to proper R -Value
❑
Yes
❑
No
❑
NA
Small spaces filled
❑
Yes
❑
No
❑
NA
Rim joists insulated
❑
❑
❑
Loose fill wall insulation meets or exceeds manufacturer's minimum weight -per -square -foot
Yes
No
NA
I requirement
✓ ROOF/CEILING PREPARATION
❑
Yes
❑
-No
❑
NA
All draft stops in place to form a continuous ceiling and wall air barrier
❑
Yes
❑
No
❑
NA
All drops covered with hard covers
❑
Yes
❑
I No
❑
NA
All draft stops and hard covers caulked or foamed to provide an air tight envelope
❑
❑
❑
All recessed light fixtures IC and air tight (AT) rated and sealed with a gasket or caulk between the
Yes
No
NA
housing and the ceiling
❑
Yes
❑
No
❑
NA
Floor cavities on multiple -story buildings have air tight draft stops to all adjoining attics
❑
Yes
❑
No
❑
NA
Eave vents prepared for blown insulation - maintain net free -ventilation area
❑
Yes
❑
No
❑
NA
Knee walls insulated or prepared for blown insulation
❑
Yes
❑
No
❑
NA
Area under equipment platforms and cat -walks insulated or accessible for blown insulation
❑
Yes
❑
No I
❑
NA
Attic rulers installed
Residential Compliance Forms 4pril 2005
INSTALLATION CERTIFICATE (Page 11 of 12) CF -6R
Site Address Permit Number
✓ Rnnp/('m.mr. RATTR
❑
❑
❑
Yes
No
NA
No gaps
❑
❑
❑
Yes
No
NA
No voids over 3/< in. deep or more than 10% of the batt surface area.
Yes
No
NA
Insulation in contact with the air -barrier
Yes
No
NA
Recessed light fixtures covered
❑
❑
❑
1 Net free -ventilation area maintained at eave vents
'Yes
No
NA
✓ ROOF/CEILING LOOSE -FILL
❑
❑
❑
Yes
No
NA
Insulation uniformly covers the entire ceiling (or roof) area from the outside of all exterior walls.
❑
❑
❑
Yes
No
NA
Baffles installed at eaves vents or soffit vents - maintain net free -ventilation area of eave vent
❑
❑
❑
Yes
No
NA
Attic access insulated
❑
❑
❑
Yes
No
NA
Recessed light fixtures covered
❑
❑
❑
Yes
No
NA
Insulation at proper depth — insulation rulers visible and indicating proper depth and R -value
❑
❑
❑
Loose -fill insulation meets or exceeds manufacturer's minimum weight and thickness requirements
Yes
No
NA
for the target R -value. Target R -value - Manufacturer's minimum required
weight for the target R -value (pounds -per -square -fool). Manufacturer's
minimum required thickness at time of installation . Manufacturer's minimum
required settled thickness . Note: To receive compliance credit the HERS rater
shall verify that the manufacturer's minimum weight and thickness has been achieved for the target
R -value. CF -6R only)
DECLARATION
✓ ❑ I hereby certify that the installation meets all applicable requirements as specified in the Insulation Installation
Procedures.
Installing Subcontractor (Co. Name) OR General
Contractor (Co. Name) OR Owner
Signature: Date:
Copies to: BUILDING DEPARTMENT, HERS RATER (IF APPLICABLE), BUILDING OWNER AT OCCUPANCY
Residential Compliance Forms April 2005
INSTALLATION CERTIFICATE (Page 12 of 12) CF -6R
Site Address
Permit Number
County Subdivision
Lot Number
Description of Insulation (Formerly IC -1 Form)
1. RAISED FLOOR
Material Brand Name
Thickness (inches) Thermal Resistance (R -Value)
2. SLAB FLOOR/PERIMETER
Material
Thickness (inches)
Perimeter Insulation Depth (inches)
3
EXTERIOR WALL
Frame Type
A. Cavity Insulation
Material
Thickness (inches)
B . Exterior Foam Sheathing
Material
Thickness (inches)
4. FOUNDATION WALL
Material
Thickness (inches)
5. CEILING
Brand Name
Thermal Resistance (R -Value)
Brand Name
Thermal Resistance (R -Value)
Brand Name
Thermal Resistance (R -Value)
Brand Name
Thermal Resistance (R -Value)
Batt or Blanket Type Brand Name
Thickness (inches) Thermal Resistance (R -Value) _
Loose Fill Type Brand
Contractor's min installed weight/W lb Minimum thickness inches
Manufacturer's installed weight per square foot to achieve Thermal Resistance (R -Value)
6. ROOF
Material Brand Name
Thickness (inches) Thermal Resistance (R -Value)
Declaration
✓ ❑ I hereby certify that the above insulation was installed in the building at the above location in conformance with the
current Energy Efficiency Standards for residential buildings (Title 24, Part 6, California Code of Regulations) as indicated
on the Certificate of Compliance, where applicable.
Item #s
(if applicable)
Signature Date
Installing Subcontractor (Co. Name) OR
General Contractor (Co. Name) OR Owner
OR Window Distributor
Item #s
Signature Date
Installing Subcontractor (Co. Name) OR
(if applicable)
General Contractor (Co. Name) OR Owner
OR Window Distributor
Item #s
Signature Date
Installing Subcontractor (Co. Name) OR
(if applicable)
General Contractor (Co. Name) OR Owner
OR Window Distributor
Residential Compliance Forms
April 2005
TITLE 24 RESIDENTIAL -REQUIREMENTS FOR
ALL PERMANANTLY INSTALLED LUMINAIRES
General
1. All ballasts for lamps rated 13 watts or greater must be electronic ballasts,.
2. Lighting fixtures that are recessed into insulated ceilings are required to be rated
for insula tion contact (IC rated) so that insulation can be placed over them. The
housing of the fixture must also be certified airtight to prevent conditioned air
escaping into the ceiling cavity or attic, or unconditioned air infiltrating from the
ceiling or attic into the conditioned space, and the must have a sealed gasket or
caulking between the housing and ceiling.
3. All high efficacy lighting must be switched separately from noir high efficacy.
Kitchen
1. At least 50 percent of the installed wattage must be from high efficacy lighting
fixtures.
Bathroom, Garage, Laundry Room, Utility Room
1. All permanently installed lighting fixtures must be high effic acy or c ontrolled by
a rnanual-on 1 automatics off occupant sensor
All Other Rooms (other than Kitchen, Bathroom, Garage, Laundry Room, Utility
Room) this includes bedroom, dining room, hallway, stairwell, etc.
1. All permanently installed lighting fixtures must be high efficacy, or manual on
automatic off occupant sensor,cbr ontrolled by a dimmer
Outd oor Lighting Attached To Buildings (does not include outdoor lighting
that is not attached to buildings, like landscape lighting or lighting mounted on
top of a post
1. All permanently installed lighting fixtures must be high efficacy, or controlled by
both a photo control and motion sensor.
Common Areas Of Low Rise Residential Buildings With Four Or More
Dwelling Units. '
1. All permanently installed lighting fixtures must be high efficacy, or Controlled
by an occupant sensor.
Residential Parking Lots and Garages fo r Eight or More Vehicles
1. he�laCes TAomatic shuttoff control, myhlevel switZn fixture cutoff (( Tare
s Ing)_, or lamps rate greater t an watts, an ipting power allAances
(LPD) as per Standards Table146 D.
i Information Center
co�x�r rtf'��
Page] o f 2
Property Information for the 2006-2007 tax year as of January 1, 2006
Property Information Assessed Value Information
Parcel Number: 773311028-6 Land 255,000
Property Address: 52855 AVENIDA DIAZ Structure 153,000
LA QUINTA CA 92253 Full Value 408,000
Lot 7 MB 019/019 SANTA
Legal Description: CARMELITA VALE LA QUINTA UNIT
17
Property Type:
SINGLE-FAMILY RESIDENTIAL
Assessment Description:
N/A
' Year Built
1977
Square Feet:
1200
:. Bedroom:
3
. Bath:
1.75
pool:
Y
} Lot Size:
0.34 Acres
Ownership Information
Mail Address:
33 CORIANDER
City, State Zip:
IRVINE CA 92603
Sales Information
Last Recorded Document:
04/2005
Recording Number:
0286306
.Related Property Information .
'City Sphered
LA QUINTA
x001 Supervisorial
District:
ROY WILSON
Landuse Designation:
CITY
Agriculture Preserve:
NOT IN AN AGRICULTURE
PRESERVE
School District-
DESERT SANDS
Water District:
CVWD
Perna Flood Plan:
FLOOD ZONE B
Total Net 408,000
Assessment Information
Assessment Number: 773311028-6
Tax Rate Area: 020-017
Taxability Code: 0-00
Base Year: 2005 .
Parcel Map -
f. Parcel Map
Tax Assessment District
CITRUS PEST CONTROL 2
CITY OF LA QUINTA
CITY OF LA QUINTA RDV
COACHELLA VAL JT BLO HIGH
COACHELLA VALLEY PUBLIC
CEMETERY
COACHELLA VALLEY REC AND
PARK
COACHELLA VALLEY RESOURCE
CONSER
COACHELLA VALLEY WATER
DISTRICT
COUNTY FREE LIBRARY
COUNTY STRUCTURE FIRE
PROTECTION
CSA 152
CV MOSQ & VECTOR CONTROL
CVWD STORM WTR UNIT
DESERT COMMUNITY COLLEGE
DESERT SANDS UNIFIED
SCHOOL
GENERAL
GENERAL PURPOSE
RIV, CO. OFFICE OF EDUCATION
For more information please visit the following links
County of Riverside Assessor - County Clerk - Recorder Pay your Taxes Online
http://pic.asrclkrec.com/Search.aspx 7/9/2007
0.
OWN
vwz3jt.*o x
"maw
Ai
R
r
C
C
r
A:Q.
QT(i�
OVA
AD
all&
OWN
vwz3jt.*o x
"maw
Ai
R
r
C
C
r
OVA
AD
all&
ad
OWN
vwz3jt.*o x
"maw
Ai
R
r
C
C
r
I
t
XV
All
-- -
MECHANICAL EQUIPMENT
SHALL BE FASTENED
IN PLACE PER SEC. 304
COMBUSTION AIR
SOURCE:.VENTED
ATTIC
PROVIDE POSITIVE
ELECTRICAL DISCONNECT,
SEE SEC. 309.1
LIGHT OVER
CONTROLS
CONVENIENCE OUTLET
IN.
MIN _ WITHIN 25' OF EQUIPMENT
M. WORKING `� PER SEC. 309.1
' SPACE AT
CONTROLS
,, 30"
WARM AIR MIN. 24" WIDE,
FURNACE PLYWD. FLOOR
0 '. ACCESS WAY l
L•h-ILIGHT SWITC
ATTIC INSULATION
20' MAX.
PLYWD PLATFORM
z .
M
ON .2x6's. 024"0/C ACCESS. LARGE ENOUGH TO REMOVE.
'.: LARGEST PIECE OF EQUIPMENT BUT
NOT LESS THAN 30"x22" ACCESS
OPENING WITHIN 20 FT. OF FURNACE
FURNACE IN ATTIC.
PER C.M.C. SEC. 319.1-319.6
N.T.S.
/3"
-- 24"-
41'
27" —
jj
DWE W2427
)BEP BD27.3
An"
W2427
BD15
�A�UF : 3a�ie a47 7,% cc'x�%4
i::':wa
5,:
4`x`1
1
it
tit ((Li Z
:......
xS
hwus�l�,l,! 2.2- 7/1 d) x /�� ��o x3�/� �� ►�
`a,arr:F
t;
TE
N
yP{{3��/�/�
II
WR3621
123"
i N
ml=
W
rn �
•`i
Q
0 J
� W
ml� OD
113"
All dimensions -size designations given are This is an original design and must not be Designed: 5/20/2007
subject to verification on job site and released or copied unless applicable fee has Printed: 5/20/2007
adjustment to fit job conditions. been paid or job order placed.
ILI-KLEIN KITCHEN.kit All Drawing #: I
Note: This drawing is an artistic
interpretation of the general appearance of
the design. It is not meant to be an exact
rendition.
'
Designed: 5120/2007
Printed: 5/20/2007
JL1-KLEIN KITCHEN.kit JLl-KLEIN KJTCHEN.kit Drawing #: 1
I
Note: This drawing is an artistic Designed: 5/20/2007
interpretation of the general appearance of Printed: 5/20/2007
the design. It is not meant to be an exact
rendition. '
JL1-KLEIN KITCHEN.kit JLI-KLEIN KITCHEN.kit Drawing #: 1
w ..
Note: This drawing is an artistic Designed: 5/20/2007
interpretation of the general appearance of Printed: 5/20/2007
the design. It is not meant to be an exact
rendition. '
JL1-KLEIN KITCHEN.kit JLI-KLEIN KITCHEN.kit Drawing #: 1
Mei" Ar . sets li. E.C. , 0. F.C. 5 . E.0 ^ Air •"d :x N9llaw, (prt.r h:ai nr• rrr>Cray . .
l
P f • •
w nuractun, stim; lies110ag r,tUlfnlwllc,9la WRp precelms for 7a.jAing aLiola prralct Fartoml'..
169•; r-1 time ArP !¢?arOlna�l i1r .l filfid $i, of wn"I .la 1'. candlllMls ane, S.Ac proautj 5:,9. !6P.L loos not racoownd
,AY Gr+Wtj V-1;:as A^t Y.11':dt? •n! Sl lLA�l:_?y �t ,a'Y C�M:Ct Tor tay i pclfit osa. rp! jjij ainufacturer•s literature Mr
aw. nt rt. org
•! a
Qualified in All 50 States
Quolificd
OP +351 •^35
7.
Or.ryA (,Va t C?rVVNCQv/ANc
-,OCP.
mv<Y.wdna.coT
PS Awning
I?std to !01f, S. 1-0i or
44'.' nyTl rrc ,�l rt c; �s .I G
lhaufaciur¢r csia�lat¢s eciferxarc¢ to L�¢ alicabl¢ sctpdard
s prcdLct meets rein
Complies with HUD
��SE4l Seal's en roumenta
�v standards parsing
"
UM Bulletin
QI :.: en•rgl• effi, ienv. heavy
No. 111
Ioac4lging:
�9 0, ..
. ::.<. n: itame .c
;.>
.� ....s • �V sash matena ts.
and consumei
100050855PKU•1
edlcarionmatera5.
Mei" Ar . sets li. E.C. , 0. F.C. 5 . E.0 ^ Air •"d :x N9llaw, (prt.r h:ai nr• rrr>Cray . .
l
P f • •
QRMd.cer°sen.�
Lil
C✓—
f
I
Frenchwood Glider
l
Vinyl -Clad Wood Frame, Dual -Pane low -E Temp
National Fenestration
Glazing with Argon
Rating C^uneit"
—
Product Type; Sliding Patio Doors with Frame
Description
Fiberglass Frame
13
1/2 Lite
5900in2
ENERGY PERFORMANCE RATINGS
U•Factor (U.S),I•P
Solar Neat Gain Coefficient
0.32
Ov28.
ADDITIONAL PERFORMANCE RATINGS
Visible Transmittance
0.45
-
- 0.26
0.31
xAre+ttmrer ru.�It,e•. +sa: ?r.e<e rt, t^•;- ront^m ,., AM'I1r 1Dle NFD,j prrcerouet mr .@?eranlnn mole pr^!h:.? larrernance.
tiF{;, rA,lr,)a tre de,er.lne•1 ,••r a ilce•f 'C+ ^t eTvir^ 11tl Cm11110< and a tneeltlt 1•r'IdVr? INC. 11W dfkt nm reC!aen•.1
a111 411 n.•t elrra•.? :ne i.h III IV •'1 t^'r 1—huf:t I.: AnY tpecitit lite. •-Wml, eanulactUrer's lite rAtpre rnr
'TIC' t• P^ r? vert••r.t^Ce Inittjnr.
nv. nr rt. nrg
•r t
Qualified in All 50 States
i,
QUAIIrICIi
sy1o� 2 Panel • DP +451 -45
• DP +301 - 30
Uan. Jfa,i�+::e5 r:.Opal�Ck
�,nvv:.vrnma.coK•
c� '4ynPanel
J.It)'i'r.5t is}2r A !�'
Frenchwood Glider
TNst9ti t0 ANSIiAAIIAiNiP 101;L5. 2'9i or
mrsg, Or t, 1.
19��faBNrtr e ,
s.ipulat.s cmforaaace to tho alplicabl� staodaM
5 fE This product meet, Green
SEA" ^earsem;ironmenral
Complies with HUD
UN Bulletin
standards gcrrerning
energ t, erriciency.heavy
No. 111
O metals in the home and
sash materials,
a, and
rER ��� edhcargiton ma enailssumer
150101885PKP-1
tNIN
Lil
C✓—
Natrona! Fenestration
J�
Irg Council
Insulated Fiberglass Swinging Door
ENERGY PERFORMANCE RATINGS
Product
U-Factor/Solar Heat Gain Coefficient (SHGQ
Description
Fiberglass Frame
1/4 Lite
54100
1/2 Lite
5900in2
3/4 Ute
Silooin2
Fullute
>11000
Triple Glazed Door
0.1$ """"
"0.04
0.25 "-""
0.29 """"10.32""-""
0.19
- 0.26
0.31
Flush/Embossed U -Factor 0.15 SHGC 0.01
Manutacturer stipulates that these ratings conform to applicable, proee4ur%^1w ;ermining whole
product oerformalue. NFRC ratinns are determined for a fixed gat of earironmta:r'.� ,eons and a
-pecific product size. Consult manufacturer's literature for other product periom,..ese Jorra+,ion, ■
www.nfre.org �,J
25`ID"
Mstr. Bedroom:
1. Moved wall to make closet;
m 2. Removed window on north wall;
csi o 3. Added double doors for entrance;
MOVED WALL S m 4. Replaced window with slider door;
:E3 5. Added transom window.
o I < Mstr. Bathroom
r � ' 1118VsV CIOSet � c 1. Moved wall to enlarge bathroom;
O
:E2. Added bathtub;
z 3. Spaced valves for new vanity/sink;
I o V� I 0 4. Replaced faucets in shower and file shower,
= Z
Ntstr Bed
5. Replaced transom window.
p 9 1 Bed 1:
°r° r o 1 1. Removed door for slider;
$ $ 2. Replaced window of like width with slider door.
v 3 Bath 1:
m 0 ` 1. Replaced vanity and faucets;
M
2.Tiled shower;
0 1 \ 1 3. Replaced transom window.
-� VAn T �$ $ _ D Living Room:
I - _ - — . �V � 1. Replaced window with slider door;
T - — - — - ��Sr~ 2. Replaced front window;
A� Bed 1 Closet I" � �) 3. Replaced front door;
' 0 1 4. Removed portion of non -load bearing walls to hall -
1 way and kitchen.
0 Kitchen:
1. Replaced cabinets and appliances.
I MSV Bath 1.
Patio:
1. Removed slider door and opened up to enclosed
r D m patio;
m m S � 1 ItX)I r 2. Removed aluminum siding from framed room and
v � m d4 0 O replaced with drywall and outside to match rest of
00 v 0 o bA I I house.
0 x ( z� 3. Replaced doors to backyard and garage;
�► Z 3 1 — — — 4. Removed window on kitchen wall;
m 0 o5. Removed and replaced windows with transom win -
0 Bed I � I lows.
I I Bath
L 0
THERMOSTAT j bQ N O
b4
480 ' 1 / 196"4*4
AUA T $ OLD WINDOW #24 $
T
� 1
m I1 �
`00 1
M EnCloSed Pado
m
n 1 3
m � O
0 <
� O o
I �
1 0
� I
idling Room
I OLD WINDOW #18 1
m .
0 1 '` O a
al a
J •
Kitchen II
'F
CONSAUCTIOWOURS
I (''tt'ober l 5t - A)rill 301 T
fL
Er;�Y,� - t• r�day:'7.00 to 5:30 p.>�—
�,u actten i �. s... 8:00 . to"L.00 p.m.
on the following o s,bi,.t: /None � $
15'6" 1
e ' : f'� ort Cocke Ido days: one
New Year's Day '' \ t Septemaber 3kh
jjr inglr.DaY :;y -Friday: 6:00 a.m. to 7:00 p.m.
Switch s dwa%Day �:oo a. . to 5:00 P.M
•,;,�,14i:.y: None
orial Day ::r. =.rca Ott Code Hob ays: None
$, 3 -way Switch jbptAdence D I A RE -INSPECTION FEE OF $30
[<D outside lite
inside lite
fan
bath fan with lite
or Day
er�Fri'�''bay
r, Ang D"
istmas Day
• smoke detector
F
el Floor Plan Old
07 Scale: 1/4" = 1'
bara L. Klein
2-855 Avenida Diaz
La Quinta, CA 92253
y:
A/-31 Yl
CITY OF LA (MITA
BUILDING & SAFETY DEPT.
APPROVED
FOR CONSTXT1 ON
22'
DA B
WILL BE CHARGED IF THE APPROVED
PLANS Ohba CARD ARE NOT ON
THE SITE FOR A SCHEDULED
INSPECTION.
NO EXCEPTIONSI
22'0'
dW4 0071 i. 11six3
__an a•
(DAFCI (DA�
v .
r�
m
r
O
M
4 ` IW 11d
8
x
�� 0014
:—. .�.
Bid I 918W
r
and upper AV -TV recepticals
S4-"
E
switch
FO3 -way switch
outside lite
Inside Ifte
fan
bath fan with Ifte
0
bath fan
outlet
GFI outlet
Ocan
light
•
smoke detector
OF
Fluorescent Lite
Remodel Floor Plan New
Date: 7/24/07 Scale: 1/4"= V
Owner. Barbara L. Klein
Address: 52-855 Avenida Diaz
La Quinta, CA 92253 7(0�
Prepared by:
Ewe" f
I
�1
110
I \
L - —0
Q n ERMWAT
I�
Baal
UNDER CABINET LITES
6 Halogens
Mstr. Bedroom: ,
1. Switch on west wall;
2. AWTV recepitical;
3. Switch inside closet;
4. Can lighting in room/closet.
Mete Bathroom
1. Moved switches in bathroom;
2. Add switch to new vanity;
3. Replaced fan and lite;
4. Can lighting in room.
Bed 1:
1. Add AWN recepiticals;
2. Can lighting in room;
3. Add switch by slider door;
4. Add outside light;
5. AWN recepiticals.
Living Room:
1. Lite outside door with switch;
2. Can lighting;
3. AWTV recepitical.
Kitchen:
1. Can lighting;
2. Outlet on south wall;
3. Replaced outlets with GFI rating;
4. Center Fan.
Enclosed Patio:
1.Can lighting;
2. Outlet and switch on west wall;
3. Center fan;
4. Double switch with 3 -way on south and east wall.
10'6"
gleT
I
1
Fiele:.d title 1
1 a F F r �o
I
g ,
Lar,
� 1 F F F B
oln
° D re Rated
Sl8 �I - thr Fi10'6"
g Note on Plan. "Hot -mopped shower pan shall be inspected upon completion of hot -mopping and shall be
filled with water for inspection." (CPC §412.8.1) 1
Noti ns Plans: "Aluminum conductors are permitted only if size 1/0 or larger, and only to feed main cr sub -
panels: All other current carrying conductors shall be copper." (LQMC §8.03.030)
t Notc on Plans: "Provide at least two 20 -ampere small appliance branch circuits to serve kitchen, breakfast
a . 'broom, and dining room. Such circuits shall have no other outlets." (CEC )
1/1043@)(I) through 210.52(B)(3)
Gangs
Note 64'Pla4 "Ptovidi at least one 20 -ampere branch circuit to serve bathroom receptacles. Such circuit(s) I
t i''abilhtia5 A other�butleis." (CEC § ) 210.11(CW), 210.52(D)
a. e tP 4'�
ec c Pltm:'Branch circuits that supply 125 -volt, single phase, 15- and 20 -ampere reeepiwlraAP
y
P
ed in dwel unit bedrooms shall be protected by an arc -fault circuit interrupter." 1 `'
ri�'iC0F
TR=,,;All HV C equipment shall be approved prior to installation by nationally recognized
dented y the listing and label of an approved agency." (CMC §302.1)
Nett oo Ports: "Appli es designed to be fixed in position shall be securely fastened in place." (CMC I
DATE BY -P" �,�_
Note on Plans: "ill construction shall comply with the 2001 California Building, Plumbing, Mechanical, 2004 1
1 Electrical, and 2005 Energy Codes and all other local codes and ordinances." Remove notes referencing other
J
codes
I
2: 1
i
UNDER CABINET LITES
6 Halogens
Mstr. Bedroom: ,
1. Switch on west wall;
2. AWTV recepitical;
3. Switch inside closet;
4. Can lighting in room/closet.
Mete Bathroom
1. Moved switches in bathroom;
2. Add switch to new vanity;
3. Replaced fan and lite;
4. Can lighting in room.
Bed 1:
1. Add AWN recepiticals;
2. Can lighting in room;
3. Add switch by slider door;
4. Add outside light;
5. AWN recepiticals.
Living Room:
1. Lite outside door with switch;
2. Can lighting;
3. AWTV recepitical.
Kitchen:
1. Can lighting;
2. Outlet on south wall;
3. Replaced outlets with GFI rating;
4. Center Fan.
Enclosed Patio:
1.Can lighting;
2. Outlet and switch on west wall;
3. Center fan;
4. Double switch with 3 -way on south and east wall.
10'6"
gleT
I
1
Fiele:.d title 1
1 a F F r �o
I
g ,
Lar,
� 1 F F F B
oln
° D re Rated
Sl8 �I - thr Fi10'6"
g Note on Plan. "Hot -mopped shower pan shall be inspected upon completion of hot -mopping and shall be
filled with water for inspection." (CPC §412.8.1) 1
Noti ns Plans: "Aluminum conductors are permitted only if size 1/0 or larger, and only to feed main cr sub -
panels: All other current carrying conductors shall be copper." (LQMC §8.03.030)
t Notc on Plans: "Provide at least two 20 -ampere small appliance branch circuits to serve kitchen, breakfast
a . 'broom, and dining room. Such circuits shall have no other outlets." (CEC )
1/1043@)(I) through 210.52(B)(3)
Gangs
Note 64'Pla4 "Ptovidi at least one 20 -ampere branch circuit to serve bathroom receptacles. Such circuit(s) I
t i''abilhtia5 A other�butleis." (CEC § ) 210.11(CW), 210.52(D)
a. e tP 4'�
ec c Pltm:'Branch circuits that supply 125 -volt, single phase, 15- and 20 -ampere reeepiwlraAP
y
P
ed in dwel unit bedrooms shall be protected by an arc -fault circuit interrupter." 1 `'
ri�'iC0F
TR=,,;All HV C equipment shall be approved prior to installation by nationally recognized
dented y the listing and label of an approved agency." (CMC §302.1)
Nett oo Ports: "Appli es designed to be fixed in position shall be securely fastened in place." (CMC I
DATE BY -P" �,�_
Note on Plans: "ill construction shall comply with the 2001 California Building, Plumbing, Mechanical, 2004 1
1 Electrical, and 2005 Energy Codes and all other local codes and ordinances." Remove notes referencing other
J
codes
I
2: 1
Ila/rmOr
m
0
u
�/1141 1�
zo /
Y,
70
>
ry —n cr,
�•M , s^•.—_ —1 — iiii 11111
X-2
Aw
� K i
ds
AR—
, (:Al1> C3
.-
..,....� moo'' -;r- -.-,� �;•f•�.
�7�7/�Io yIOZ
;i' ..gi
ats�..•.ir.�� . � 3
5mm
.I y�
{'
01,
1
f M 0, f*
1
S 2- sss /) vclmt �,oz
r
4 i • -
n