Loading...
11-1098 (RER)rT P.O. BOX 1504 ^� VOICE (760) 777-7012 4 78-495 CALLE TAMPICO FAX (760) 777-701' 1 LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153 BUILDING PERMIT Dater 10/18/11 Application Number:Y 11 0000_1098��_-..> Owner: Property Address: J 44345 WILLOW CIR KELLY RICHARD "A APN: 604-092-014-52 -"22982 44345 WILLOW CIR Application description: REMODEL - RESIDENTIAL LA QUINTA, CA 92253 d Ji Property Zoning: LOW DENSITY RESIDENTIAL u Application valuation: 500 �-' T 20 2011 !� Contractor: � 6 Applicant: Architect or Engineer: Owner CITY or �U ---—------------------------------------------------------------------------------------——-------- LICENSED CONTRACTOR'S DECLARATION - WORKER'S COMPENSATION DECLARATION hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with 1 hereby affirm under penalty of perjury one of the following declarations: Section 7000) of Division of the Business and Professionals Code, and my License is in full force and effect._ - _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided License Class: License No.: for by Section 3700 of the Labor Code, for the performance of the work for which this permit is . issued. Date: Contractor:. _ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workerscompensation OWNER -BUILDER DECLARATION insurance carrier and policy number are: ' I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the Carrier Policy Number following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to I certify that, in the performance of the work for which this permit is issued, I shall not employ any construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the.. .. person in any manner so as to become subject to the workers' compensation laws of California, permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State - _ and agree that, if I should become subject to the workers' compensation provisions of Section License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions.Code) or 3700 of the Labor Code, I shall forthwith comply with those provisions. that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by anyapplicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: Ate: plicant: " 1 I, as owner of the property, or my employees with wages as their. sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL Contractors' State License Law does not apply to an owner of property who builds or improves thereon, SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND - and who does the work himself or herself through his or her own employees, provided that the DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN improvements are not intended or offered for sale. If, however, the building or improvement is sold within SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. ' one year of completion, the owner -builder will have the burden of proving that he or she.did not build or . • improve for the purpose of sale.). APPLICANT ACKNOWLEDGEMENT (_) I, as owner of the'property, am exclusively contracting with licensed contractors to construct the project -(Sec. IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of conditions and restrictions set forth on this application. property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed. - 1. Each person upon whose behalfthis application is made; each person at whose request and for pursuant to the Contractors' State License Law.). - whose benefit work is performed under or pursuant to any permit issued as a result of this application, (=1 I am exempt under Sec: , BAP.C. for this reason - the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. • Date: - wner: 2. Any permit issued as a result of this application becomes null and void if work is notcommenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject CONSTRUCTION LENDING AGENCY permit to cancellation. I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the I certify that.1 have read this application and state that the above information is correct. I agree to comply with all 'work for which this permit is issued (Sec. 3097, Civ. C.). - city and county ordinances and state laws relating to building construction, and hereby authorize representatives* " - of this county to enter upon a above-mentioned property for inspection purposes. Lender's Name: ie: ' S' . ature (Applicant or Agent(: Lender's Address: LQPERMIT Application Number . . 11-00001098 ------ Structure Information WINDOW CHANGEOUT TO FRENCH DOORS,-[ENG],.--'--- Other struct info . . . .. CODE'EDITION 2010 Permit ._ BUILDING PERMIT Additional desc . Permit Fee . . . . 15.00 Plan Check Fee 9.75 Issue..Date Valuation 500 Expiration Date.. 4/15/12 Qty Unit Charges Pei Extension BASE FEE 15.00 Permit ELECT - ADD/ALT/REM Additional desc : Permit Fee 16.50 Plan Check Fee 4.13 Issue Date . . . . Valuation . . . . 0 Expiration Date 4/15/12 Qty Unit Charge Per Extension BASE FEE 15.00 2.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20 1.50 Special Notes and Comments CHANGEOUT EXISTING WINDOWS TO FRENCH- DOORS [ENGINEERED.] FRAMING ALTERATIONS AND EXTERIOR DOOR LIGHT AND SWITCH REQUIRED. 2010 CALIFORNIA BUILDING CODES. October 18, 2011 8:45:51 AM AORTEGA -------------------- Other_Fees BLDG STDS ADMIN (SB1473) -------------- 1.00 ENERGY REVIEW FEE .98 STRONG MOTION (SMI) -'RES .50 Fee summary Charged Paid Credited Due ---------------------- Permit Fee Total 31.50 .00 .00, 31.50 Plan Check Total 13.88 .00 .00 13.88 Other Fee Total. 2.48 .00.00 2.48 Grand Total 47.86 .00 .00 47.86. LQPERMIT -.. - .. P.O. Box 1504 LA QUINTA, CALIFORNIA 92247-1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILD[ -4G & SAFETY DEPARTMENT PROPERTY OWNER'S PACKAGE (760) 777-7012 FAX (760) 777-7011 Disclosures & Forms for Owner -Builders Applying for Construction Permits NOWE Tn PROPERTY OMFR Dear Property Owner. An. application for a building t has been submitted. in your name listing yourself as the builder of the :property imptovememts_specified at .We are providing you with an owner -Builder Acknowledgment and. information Verifies ' n Eonn to make you avraia.of your responsibilities and possible risk you may incur by having this permit•issued. in your name as .the Ove -Builder. We Will not issue a buiiding.piermit until yewhave read, initialed your. tmderstandurg of each:prevision, signed, and returned this form to us at our official address indicated. An agent of the owner cannot execute this -notice unless you, the property owner, obtain the prior approval of the permitting authority. RLRECTIONS.* bead and initial each statement -below -to signify you uridw.ztand or very this a tformation. 1. I understand a frequent practice of unlicensed persons is to have the. property owner obtain an "Owner -Builder" building permit that erroneously implies that the property owner is providing his or her own lzbor and material personafi. I, as an Owner -Builder, may be held liable and subject to serious. financial risk for. any injuries sustained by an unlicensed person and his or her employees while working on my property. My homeowner's insurance may not provide coverage for those mjunes. I am willfully acting as an Owner -Builder and am aware of the limits of my insurance coverage for injuries to workers on my Party. *-2. 1 understand building permits are not required to be signed by property owners unless they are responsible for the construction and are not htnng a licensed Contractor to assume this responsibility.. A_____3- I understand as an "Owner -Builder" I am' .the responsible.party of record on the permit. I understand that I may protect myself from potential financial risk by hiring a licensed Contractor and having the permit file.] in his or her name instead of my own. �4. I understand Contractors are required b law to be licensed their license num . q Y ed and bonded in CaliforniaCahforua and to list th hers on pe is and contracts. 5.1 understand if I employ or otherwise engage any persons other than California licemed Contractors, and the total value of my construction is at least five hundred dollars ($500), including labor and materials, I may be considered an "employer" under state and federal law. 6. I understand if I am considered an "employer" under state and federal law, I must register with the state and federal government, withhold payroll taxes, provide woirkers' compensation disability insurance, and contribute .to unemployment compensation for each "employee." I also understand my failure to abide by these laws may subject me to serious financial ` 7. I understand under California Contractors' State License Law, an Owner -Builder who builds single-family residential structures cannot .legally build them with the .intent to offer them for sale, unless aH work is performed by licensed subcontractors and the number of structures does not exceed four within any calendar year, or all of the work is performed under contract with a licensed general building Contractor. I understand asan Owner -Builder if I sell the property for which this peTQ►it is issued, I may be held liable for any financial or personal. 4uries tustained• by any subsequent owner(s) that result from any latent construction defects in the workmanship or materials. 9. I understand I may obtain more information regarding my obligations as an "employer" from the internal Revenue Service, the United States Small Business Administration, the California Department of Benefit Payments, and the California Division of Industrial Accidents. I also understand I may contact the California Contractors' State License Board (CSLB) at I- 80 -321-CSLB (2752) or www.csib.ca.gov for more information about licensed contractors. • 1Q. I am aware of and consent to an Owner -Builder building permit applied for in my name, and understand that I am the party l ally and an financially nsible for. pressed construction activity at the following address: W agree that, as the party legally and financially responsible for this proposed construction activity,.( will abide by all ap licable laws and requirements that govern Ow'rier-Builders as well as employers. 12.1 to notify the issuer of this form to any of the information I agree trfy immediately of any additions; deletions, or changes y have provided on this form.. Licensed contractors are regulated by laws designed to protect the public. If you contract with someone who does not have a license, the Contractors' State License Board may be unable to assist you with any finaneial loss you may sustain as a result of a complaint. Your only remedy against unlicensed Contractors may be in'civil- court. It is also important for you to, understand that if an unlicensed Contractor or employee of that individual or firm is injured while working on your property; you may be held liable for damages. If you obtain a permit as Owner -Builder and wish to hire Cont mors, You will be responsible for verifying whether: or not those Coutractors are properly licensed and the status of tha'ir workers' compensation insurance coverage. Before a building permit can be issued, this form must be completed and signed by the property owner and returned to the agency responsible for issuing; tlhe.permit, NOW A copy of tke property owner's dklvea'slice4ae, form notadotttMn; or other verification acceptable to eY is to be presented when the permit is ismed to verify the property owner's signature. Signature of property owner Date: 10 %g ` Note: The following Authorization Form is required to be completed by the property owner only when designating an agent of the property owner to apply for a construction permit for the Owner -Builder. AUTHORIZATION OF AGENT TO ACT ON PROPE'RTY OWNER'S BEHALF Excluding the Notice to Property Owner, the execution of which I understand is my personal responsibility, I hereby authorize the following person(s) to act as my agent($) to apply for, sign, and file the documents necessary to obtain ari Owner -Builder Permit for my project. Scope of Construction Project (or Description of Work): Project Location or Address: Name of Authorized Agent: Address of Authorized Agent: Tel No I declare under penalty of perjurythat I am the property owner for the address listed above and I personally filled out the above information and certify its accuracy. Note: A copy of the owner's driver's license, form notarization, or other verification acceptable to the agency is required to be presented when the permit is issued to verify the property owner's signature.. Property Owner's Signature: Date: Bin , � Cit7' of La Q uin to Building & Safety Division Box'1504, 78-495 Calle Tampico La Quinta; CA 92253 - (760) 12. Building Permit.Application and Track!ng Sheet Permit,#P.O. t S Project Address: 4 - 3 LL Owner's Name: A. P. Number: - P% /- o / Address: :3 YsJ� l�D Legal Description: OW 7-9' 2 2 17,6Z to f .' S? City, ST, Zip: QU N Contractor: Address: eph acd,`:b. Telephone: ..."1 Project Description: N City, ST, Zip: iii�y N © D Telephone: Y1; < 6-V l State Lic. # : City Lic. #: Arch., Engr., Designer. ScfieiJ Address: 4q- 9,yo J(5FFtQsbw s . sir, 130`211 City, ST, Zip:/c7CA f2U I Telephon . We) e) o - (o ° State Lic. Name of Contact Person: 44 fr ('� Construction Type: Occupancy: -- I Project type (circle one): New Add'n Alter Repair Demo Sq. Fc: # Storie< #Units: Telephone # of Contact Person: (7&0) $$O•- 6'7 % Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS UNE # Submittal Pian Sets Req'd Rcc'd 2. '[RACKING PERMIT FEES Plan Check submitted Item Amount Structural Cates. Reviewed, ready for corrections Plan Check Deposit Truss Cala. Called Contact Person Plan Check Balance This 24 Cala 'r Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2'' Review, ready for correctionsame Electrical Subcoutactor List Called Contact Person Plumbing Grant Deed Plans picked cep S.M.I. H.O.A. Approval APP Plana resubmitted Grading IN HOUSE:- ''' Review, ready for correcdon&rMue Developer Impact Fee Planning Approval Called Contact Person A.LP.P. Pub. Wks. Appr Date of permit issue School Fees aim Tctal Permit Fees ►o��� �ryo�� — QGcp�f do •� s •-, ,✓ v�-w�--- � r t BUILDING ENERGY ANALYSIS REPORT PROJECT: Mr. & Mrs. Kelly's Residence Alteration's 44-345 Willow Cir. La Quinta, CA 92253 t Project Designer: Sergio H. Garcia Design Consultants 49-950 Jefferson St., Ste.#130-219 - Indio, CA 92201 .' 76-880-6796 Report Prepared by: Sergio H. Garcia Consulting MOM i -CITY OF LA QUINTA OCT o s toll BUILDING & SAFETY DEPT. By APPROVE® FOR CONSTRUCTION Job Number: } T-03-2011 DATE:;, 8Y __A9== Date: 9/26/2011 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC — www.energysoft.com. EnergyPro 5.1 by EnerqySoft User Number. 6079 RunCode: 2011-09-26T15:42:26 ID: T-03-2011 n ,�. `< ' ` ;t� _ i ��• _. i.,:�= ` r , .. .: .. .� PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name Mr. & Mrs. Kelly's Residence Alteration's Building Type 10 Single Family ❑ Addition Alone ❑ Multi Family ® Existing+ Additon/Afteration 1912612011 Date Project Address 44-345 Willow Cir. La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Ares 1, 887 Addition 0 # of Stories 1 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes El No HERS Measures -- If Yes, A CF -4R must be provided per Par. 2 of 5 of this form. ❑ Yes El No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity Features see Part 2 of 5 Status Roof Wood Framed Attic R-19 1,887 Existing Wall Wood Framed R-11 1,310 Existing Door Opaque Door None 18 Existing Slab Unheated Slab -on -Grade None 1,887 Perim = 211' Existing FENESTRATION U- Exterior Orientation Area Factor SHGC Overhang Sidefins Shades Status Front (E) 51.9 0.710 0.73 2.0 none Bug Screen Existing Front (E) 40.0 0.710 0.73 4.0 none Bug Screen Existing Left (S) 13.3 0.710 0.73 none none Bug Screen Removed Left (S) 13.0 0.710 0.73 none none Bug Screen Existing Left (S) 13.3 0.370 0.39 2.0 none Bug Screen Altered Left (SW) 10.0 0.710 0.73 6.0 none Bug Screen Existing Rear (149 73.3 0.710 0.73 6.0 none Bug Screen Existing Rear (NW) 10.0 0.710 0.73 6.0 none Bug Screen Existing Right (N) 40.0 0.590 0.45 8.0 none Bug Screen Existing Rear (1/10 26.4 0.710 0.73 10.0 none Bug Screen Existing Right (N) 53.0 0.710 0.73 2.0 none Bug Screen Existing HVAC SYSTEMS Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status 1 None n/a Split Air Conditioner 15.3 SEER No SEtback Existing HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status HVAC System Ducted Ducted Attic, Ceiling Ins, vented 8.0 Existing WATER HEATING Ot . Type Gallons Min. Eff Distribution Status EnergyPro 5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26715:42:26 ID: T-03-2011 Page 3 of 12 PERFORMANCE CERTIFICATE: Residential Part 2 of 5 CF -1 R Project Name Mr. & Mrs. Kelly's Residence Alteration's Building Type ® Single Family O Addition Alone 0 Multi Family ® Existing+ Addition/Alteration Date 912612011 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. HERS REQUIRED VERIFICATION , Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF -4R form for each of the measures listed below for final to be given. EnemyPro 5.1 by EnergySoft User Number: 6079 RunCode: 2011-09-26715:42:26 ID: T-03-2011 Page 4 of 12 PERFORMANCE CERTIFICATE: Residential Part 3 of 5 CF -1 R Project Name Building Type 0 Single Family ❑ Addition Alone Date Mr. & Mrs. Kelly's Residence Alteration's ❑ Multi Family 0 Existing+ Addition/Alteration 1912612011 ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/fiz- yi Space Heating 9.61 9.75 -0.14 Space Cooling 116.89 114.71 2.17 Fans 26.13 25.63 0.50 Domestic Hot Water 0:00 0.00 0.00 Pumps 0.00 0.00 0.00 Totals 152.63 150.10 2.53 Percent Better Than Standard: 1.7% BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (E) 90 deg Ext. Walls/Roof Wall !krea Area Number of Dwelling Units: 1.00 (E) 251 92 Fuel Available at Site: Natural Gas (S) 452 36 Raised Floor Area: 0 (►M 373 110 Slab on Grade Area: 1,867 (N) 583 93 Average Ceiling Height: 6.0 Roof 1,887 0 Fenestration Average U -Factor. 0.66 TOTAL: 331 Average SHGC: 0.66 Fenestration/CFA Ratio: 17.5% REMARKS Copyright 2011 Sergio H. Garcia STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and spec fications needed to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and complete: Documentation Author Company Sergio H. Garcia Consulting •9/26/2011 Address Name City/State/ZipCity/State/Zip Phone Sind Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, wii:h the specifications, and with any other calculations submitted with this permit application, and recognizes that complance using duct design, duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Company Sergio H. Garcia Design Consultants Address 49-950 Jefferson St., Ste.#130-219 Name Sergio H. Garcia City/State/Zip Indio, CA 92201 Phone 76-880-6796 Signed UL cense # Date EnemvPro 5.1 by EnemySoft User Number. 6079 RunCode: 2011-09-26715:42:26 ID: T-03-20" Page—To—f12 CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CF -1 R Project Name Mr. & Mrs. Kelly's Residence Alteration's Building Type ® Single Family O Addition Alone O Multi Family m Existing+ Addition/Alteration Date 1912612011 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Factor Cav' Exterior Frame Interiorl Frame Azm I Joint Appendix Tilt Status 4 Location/Comments Roof 1,887 0.049 R-19 901 18 Existing 4.2.1-A4 Zone 1 Wall 64 0.110 R-11 901 90 Existing 4.3.1-A2 Zone 1 Wall 11 0.110 R-11 1801 90 Existing 4.3.1-A2 Zone 1 Wall 5 0.110 R-11 90 90 Existing 4.3.1-A2 Zone 1 Wall 28 0.110 R-11 0 90 Existing 4.3.1-A2 Zone 1 Wall 27 0.110 R-11 90 90 Existing 4.3.1-A2 Zone 1 Wall 11 0.110 R-11 0 90 Existing 4.3.1-A2 Zone 1 Wall 37 0.110 R-11 90 90 Existing 4.3.1-A2 Zone 1 Wall 11 0.110 R-11 180 90 Existing 4.3.1-A2 Zone 1 Wall 27 0.110 R-11 90 90 Existing 4.3.1-A2 Zone 1 Wall 264 0.110 R-11 180 90 Existing 4.3.1-A2 Zone 1 Wall 19 0.110 R-11 225 90 Existing 4.3.1-A2 Zone 1 Wall 28 0.110 R-11 270 90 Existing 4.3.1-A2 Zone 1 Wall 19 0.110 R-11 315 90 Existing 4.3.1-A2 Zone 1 Wall 23 0.110 R-11 0 90 Existing 4.3.1-A2 Zone 1 Wall 30 0.110 R-11 270 90 Existing 4.3.1-A2 JZone 1 FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGCz Azm Status Glazing Type Location/Comments 1 Window 18.6 0.710 Default 0.73 Default 90 Existing Double Metal Clear Zone 1 2 Window 40.0 0.710 Default 0.73 Default 90 Existing Double Metal Clear Zone 1 3 Window 33.3 0.710 Default 0.73 Default 90 Existing Double Metal Clear Zone 1 4 Window 13.3 0.710 Default 0.73 Default 180 Removed Double Metal Clear Zone 1 5 Window 13.0 0.710 Default 0.73 Default 180 Existing Double Metal Gear Zone 1 6 Window 13.3 0.370 NFRC 0.39 NFRC 180 Altered Geld Wen Zone 1 7 Existing 0.710 Default 0.73 Default Double Metal Clear pre -altered for above 8 Window 10.0 0.710 Default 0.73 Default 225 Existing Double Metal Gear Zone 1 9 Window 28.3 0.710 Default 0.73 Default 270 Existing Double Metal Clear Zone 1 10 Window 10.0 0.710 Default 0.73 Default 315 Existing Double Metal Clear Zone 1 11 Window 40.0 0.590 NFRC 0.45 NFRC 0 Existing IWC 6200 Alumkow-E Zone 1 12 Window 26.4 0.710 Default 0.73 Default 270 Existing Double Metal Clear Zone 1 13 Window 5.0 0.710 Default 0.73 Default 270 ExistingDouble Metal Clear Zone 1 14 Window 40.0 0.710 Default 0.73 Default 270 Existing Double Metal Clear Zone 1 15 Window 10.0 0.710 Default 0.73 Default 0 Existing Double Metal Clear Zone 1 16 Window 10.0 0.710 Default 0.73 Default 0 Existing Double Metal Clear Zone 1 (1) LI -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window Hat Wd Ove ang Left Fin Right Fin Len Hqt LExt REM Dist Len H t Dist Len I Hot 1 Bug Screen 0.76 4.0 4.7 2.0 0.1 2.0 2.0 2 Bug Screen 0.76 6.7 5.0 4.0 0.1 4.0 4.0 3 Bug Screen 0.76 50.0 6.7 2.0 0.1 2.0 2.0 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 6.7 6.0 2.0 0.1 2.0 2.0 7 Bug Screen 0.76 6.7 6.0 2.0 0.1 2.0 2.0 8 Bug Screen 0.76 5.0 2.0 6.0 0.1 6.0 6.0 9 Bug Screen 0.76 5.0 5.7 6.0 0.1 6.0 6.0 10 Bug Screen 0.76 5.0 2.0 6.0 0.1 6.0 6.0 11 Bug Screen 0.76 6.7 6.0 8.0 0.1 8.0 8.0 12 Bug Screen 0.76 4.7 5.7 10.0 0.1 10.0 10.0 13 BuScreen 0.76 1.3 3.7 6.0 0.1 6.0 6.0 14 Bu Screen 0.76 6.7 6.0 6.0 0.1 6.06.0 15 1Bug Screen 0.76 5.0 2.0 2.0 0.1 2.0 2.0 16 Bu Screen 0.76 5.0 2.0 2.0 0.1 2.0 2.0 EnergyPro 5.1 by EnergySoft User Number- 6079 RunCode: 2011-09-26715:42:26 ID: T-03-201 Page 6 of 12 CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CFA R Project Name Mr. & Mrs. Kelly's Residence Alteration's Building Type ® Single Family ❑ Multi Family ❑ Addition Alone G3 Existing+ Addition/Alteration Date 1912612011 OPAQUE SURFACE DETAILS Surface U- Insulation Joint Appendix Type Area Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Wall 16 0.110 R-11 180 90 Existing 4.3.1-A2 Zone 1 Wall 51 0.110 R-11 270 90 Existing 4.3.1-A2 Zone 1 Wall 96 0.110 R-11 180 90 Existing 4.3.1-A2 Zone 1 Wall 135 0.110 R-11 270 90 Existing 4.3.1-A2 Zone 1 Wall 294 0.110 R-11 0 90 Existing 4.3.1-A2 Zone 1 Wall 115 0.110 R-11 0 90 Existing 4.3.1-A2 Zone 1 Door 18 0.500 None 0 90 Existing 4.5.1-A4 Zone 1 Slab 1,887 0.730 None 0 180 Existing 4.4.7-A1 Zone 1 FENESTRATION SURFACE DETAILS ID Type Area 1.11 -Factor' SHGC Azm Status Glazing Type Location/Comments 17 Window 16.5 0.710 Default 0.73 Default 0 Existing Double Metal Clear Zone 1 18 Window 16.5 0.710 Default 0.73 Default 0 Existing Double Metal Clear Zone 1 (1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-13 = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS Window ID Exterior Shade Type SHGC Hat Wd Ove hang Len H t LExt RExt Left Fin Right Fin Dist Len Hat Dist Len H t 17 Bug Screen 0.76 3.7 4.5 2.0 0.1 2.0 2.0 18 Bug Screen 0.76 3.7 4.5 2.0 0.1 2.0 2.0 EnergyPro 5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26T15:42:26 ID: T-03-2011 Page 7 of 12 CERTIFICATE OF COMPLIANCE: Residential Part 5 of 5 CF -1 R Project Name Mr. & Mrs. Kelly's Residence Alteration's Building Type ® Single Family ❑ Addition Alone ❑ Multi Family ® Existing+ Addition/Alteration Date 1912612011 BUILDING ZONE INFORMATION System Name Zone Name Floor Area New Existina Altered Removed Volume Year Built HVAC System Room 1 1,887 15,096 1989 Totals 01 01 1,8871 0 HVAC SYSTEMS System Name Qty. Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status HVAC System 1 None n/a Split Air Conditioner 15.3 SEER No Setback Existing HVAC DISTRIBUTION System Name Heating Duct Cooling Duct Location R -Value Ducts Tested? Status HVAC System Ducted Ducted Attic, Ceiling Ins, vented 80 ❑ Existing WATER HEATING SYSTEMS S stem Name Qty. Type Distribution Rated Input Btuh Tank Cap. al Energy Standby Factor Loss or or RE Pilot Ext. Tank Insul. R- Value Status CEC Standard MULTI -FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control Hot Water Piping Length (ft) C O ftl aPipe — System Name Length Pipe Diameter Insul. Thick. Qty. HP Plenum Outside Buried 1 01 ❑ EnergyPro 5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26T15:42:26 ID: T-03-2011 Page 8 of 12 MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3). MF -1 R Project Name I I -Date Mr. & Mrs. Kelly's Residence Alteration's t `' 9/26/2011 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF - 1 R -ALT Form) shall supersede the items marked with an asterisk (•) below. This Mandatory Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R Form with plans. Building Envelope Measures: 116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form' ' §118(i): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(i) when the installation of a Cool Roof is specified on the CF -1 R Form. *§1 50 a : Minimum R-19 insulation in wood -frame ceiling or equivalent U -factor. - 150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value. *§1 50 c : Minimum R-13 insulation in wood -frame wall or equivalent U -factor. *§1 50 d : Minimum R-13 insulation in raised wood -frame floor or equivalent U -factor. §150(0: Air retarding wrap is tested, labeled, and installed according to ASTM E1677-95(2000) when specified on the CF -1 R Form. §150(g): Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.30%; water vapor permeance rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 a 1A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. . §150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release valve backflow prevention, pump isolation valve and recirculation loop connection requirements of §113(c)5. - §115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances' (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. -� 150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.. §150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112 c s §1506)1A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. §1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of recirculating sections of hot water pipes are insulated per Standards Table 150-B. §1500)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. §1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table' 123-A. 150(50(WA: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance and wind. §1500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in conditioned space. §1500)4: Solar water-heatinq systems and/or collectors are certified b the Solar Rating and Certification Corporation. T, EnergyPro 5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26715:42:26 ID: T-03-2011 Page 9 of 12 MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date Mr. & Mrs. Kelly's Residence Alteration's L 9/26/2011 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings reater than 1/4 inch the combination of mastic and either mesh or tape shall be-ised ' §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. • ' §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes . unless such tape is used in combination with mastic and draw bands. 150(m)7: Exhaust fan systems have back draft or automatic dampers. or. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. §150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. §150(m)10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and S a Heating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card wth operating instructions; and shall not use electric resistance heating ora pilot light §114(b)1: Any pool or spa heating equipment shall be installed with at least_ 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools or spas that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. . §150(p): Residential pool systems or equipment meet the pump sizing, flow rate, piping, filters, and valae requirements of §150 . Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies .. contained in Table 150-C and is not a low efficacy luminaire as specified by §150(k)2. 0 d - 150(k)3: The wattage of permanently installed luminaires shall be determined as specified by §130(d) - §150(k)4: §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminairE or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - voltage tamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. §150(k)6: Lighting inte ral to exhaust fans in rooms other than kitchens shall meet the applicable requirements of §156(k). ' 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. 41 §150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 1t2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. - - _ §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. z. EnergyPro 5.1 by Energysoft User Number. 6079 RunCode: 2011-09-26T15:42:26 ID: T-03-22011 Page 10 of 12 . , , .• r � .. Y .� a �•w i. * �.. a ,' �. � 3. •, •. t - � _ , }} `•_ _- MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R Project Name Date Mr. & Mrs. Kelly's Residence Alteration's 1912612011 §150(k)l0: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not.required to be controlled by a manual -on occupancy sensor. §150(k)l1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual - on occupant sensor that complies with the applicable requirements of §1.19. EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site is not required to comply with 150 k 11. §150(k)12: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testingtrating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed Wth a gasket or caulk between the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires strall be allowed provided that they are controlled by a manual ontoff switch, a motion sensor not having an override or bypass switch Mat disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptionl to §150(k)13 may be controlled by a temporary override swiMh which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the Calfomia Electric Code need not be high efficacy luminaires. §150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no more than five watts of power as determined according to §130(d). §150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130,132; 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130 131, 134, and 146. §150(k)16: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminares shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements o9 119. EnergyPio 5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26715:42:26 ID: T-03-201 I Page 11 of 12 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Mr. & Mrs. Kelly's Residence Afteration's Date 9/26/2011 System Name HVAC System Floor Area 1,887 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 COIL CFM Total Room Loads 1,608 Return Vented Lighting Return Air Ducts Return Fan Ventilation F 0 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK Sensible 32,717 0 1,889 0 0 492 1,889 1 36,986 COIL HTG. Latent CFM 2,871 1,034 0 0 2,871 PEAK Heating em Sensible Output per Syswm 0 31,126 Total O Btuh) 0 Output Btuh/ 0.0 1,530 Cooling System 0 Output r System 58,000 0 Total Output Btuh 58,000 -492 Total Output ons 4.8 1,530 Total Output Btuh/ 30.7 Total Output on 390.4 33,693 Air System CFM per System 2,000 HVAC EQUIPMENT SELECTION Airflow ctm 2,000 Lennox HSXA16-060-230` 40,344 8,966 0 Airflow cfm/ 1.06 Airflow cfm/Ton 413.8 Total Adjusted System Output (Adjusted for Peak Design conditions) I TIME OF SYSTEM PEAK 1 40,344 8,966 0 Aug 3 PM F Jan 1 AM Outside Air % 0.0% Outside Air cfm/ 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 67 OF �T Outside Air 0 cfm Supply Fan 2,000 cfm 67 OF 68 OF 97 OF Heating Coil 96 ,F ROOM 68 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 76/62°F Do Outside Air 0 cfm 76/62°F 76/62°F 55/54°F oT , Supply Fan Cooling Coil 2,000 cfm 47.7% 56 / 54 OF ROOM 75/62°F I EnergyPro5.1 by EnergySoft User Number. 6079 RunCode: 2011-09-26T15:42:26 ID: T-03-20`• 1 Page 12 of 12