SA 2006-948 (SIGN)QgMrC4V
a,
P.O.~Box 1504
r, �• L.A QUINTA, CALIFORNIA 92247-1504
.
oFtN78-495 CAL.LE TAMPIco: 4 (760) 777-700,0
LA QUINTA, CALIFORNIA 9225:3: FAX (760) 777-7.1.01
February 24, 2006 ;
Mr. Eddie Vidales
Donco & Sons Inca !
1410 North Daly Street . ,
Anaheim, CA 92806
SUBJECT: SIGN PERMIT 2006-948 (ARCO MONUMENT)
Dear,mr. Vidales:
The Community Development Department has reviewed and approved .your, request to
replace the existing permanent business identification monument sign at 46-150
Washington Street. -The approval is subject to the following Conditions:
1. This sign permit grants one.permanent monument.sign. The materials for the
sign are per the approved'plans on file with the;Community Development
Department.
2. If necessary, a.building permit shall be obtained from .the Building &_,Safety
Department prior to installation of the sign:
I have enclosed two stamped approved copies of the plans. One .is for your submittal to
the Building & Safety Department and the other is for your. records.
Should you have any* questions . or need :additional information, please feel. free to
contact me at (760).777-7125. ?
Sincerely,
JA UU ..
Assistant Planner , 1
c: Building & Safety Department'
CERTIFICATE
OF COMPLIANCE (Part 1 of 2)
OLTG-1-C
OLTG-1-C
Certificate of Compliance. Required on plans for all submittals for outdoor lighting. Part 2 of 2 may be incorporated in
PROJECT NAME
Aero eYv)c `tj ,/1
DATE
;2-
PROJECT ADDRESS
Cr
/NE
Bwldina Permit ,
r -,Checked v ate
Enforcement Agency Use `
PRINCIPAL DESIGNER -LIGHTING
add;Vi dA
TELEPHO
DOCUMENTATION AUTHOR -e
�� i e v"G 0.4- 5
TELEPHONE
GENERAL INFORMATION
4. Use OLTG-I-C if the project consists of outdoor lighting,and indoor or outdoor signs, but no other indoor lighting
❑ OLTG-2-C
DATE OF PLANS
I OUTDOOR LIGHTING ZONE (✓ One) ❑ LZ1 ' ❑ LZ2 ❑ LZ3
❑ LZ4
FUNCTION TYPE
❑ OUTDOOR LIGHTING OUTDOOR SIGNS ❑ INDOOR SIGNS
PHASE OF CONSTRUCTION
❑ NEW CONSTRUCTION ❑ ADDITIONS ❑ ALTERATIONS
STATEMENT OF COMPLIANCE
I nls uertlticate of compliance lists outdoor lighting system specifications need to comply with Title 24, Parts 1 and 6 of the California Code of. Regulations.
This certificate applies only to building lighting requirements.
The documentation prepares hereby certifies that the documentation is accurate and complete.
DOCUMENTATION AUTHOR SIGNATURE DATE
The Principal Lighting Designer hereby certifies that the proposed outdoor lighting and signs design represented in this set of construction documents is
consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application.
The proposed building has been designed to meet the lighting requirements contained in the applicable parts of Sections 110, 119,130 through 132, 146,
and 149 of Title 24, Part 6. Please ✓ one:
❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person
responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect.
❑ I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by section 5537.2 or 6737.3 to sign this document
as the person responsible for its preparation; and that I am a licensed contractor performing this work.
❑ I affirm -that I am eligible under the provisions of Division 3 of the Business and Professions Code. to sign this document because it pertains to a
structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537,5538 and 6737.1.
(These sections of the Business and Professions Code are printed'in full in the Nonresidential Manual.
P CIPAL LIGHTING DESIGNER -NAME SIGNATURE DATE
VAX co 7510-44—
INSTRUCTIONS TO APPLICANT OUTDOOR LIGHTING COMPLIANCE & WORKSHEETS (✓ boz If worksheet Is Included)
For de ailed instructions on the use of this and all Energy Efficiency. Standards compliance forms, please refer to the Nonresidential
Ma al published by the California Energy Commission.
OLTG-1-C
Certificate of Compliance. Required on plans for all submittals for outdoor lighting. Part 2 of 2 may be incorporated in
schedules on the plans.
Either LTG -1-C or OLTG-1-C may be used for signs as follows:
1. Use LTG -1-C if the project consists solely of indoor signs
2. Use LTG -1-C if the project consists of indoor lighting, and.outdoor or indoor signs, but no other outdoor lighting.
3. Use OLTGA-C if the project consists solely of outdoor signs
4. Use OLTG-I-C if the project consists of outdoor lighting,and indoor or outdoor signs, but no other indoor lighting
❑ OLTG-2-C
LIGHTING COMPLIANCE SUMMARY. Applicable Parts required for ALL outdoor lighting allowances (Except for Signs)
❑ OLTG-3-C
AREA CALCULATIONS WORKSHEETS. Applicable parts required for all outdoor area calculations.
OLTG-4-C.
SIGN LIGHTING COMPLIANCE. Required for all intemally and extemally illuminated signs, for both indoor and outdoor ,
signs.
2005 Nonresidential Compliance Forms Manch 2005
CERTIFICATE OF COMPLIANCE (Part 2 of 2). OLTG-1-C
PROJECT NAME
Lighting Schedules on Plans Show that Outdoor Lighting Meets Allowed Lighting Power
✓
❑ Lighting power allowances for general site illumination on OLTG-2-C Part 1 of 4
❑ Not Applicable
❑ Lighting power allowances for local ordinances or for security multipliers on OLTG-2-C. Part 2 of 4
❑ Not Applicable
❑ Lighting 'p wer allowances for specific applications, otherthan vehicle service stations with canopies on,OLTG-2-C. Part 3 of 4
❑ Not Applicable
❑ Lighting power allowances for vehicle service station canopies on OLTG-2-C Part 4 of 4
❑ Not Applicable -
❑ Sign lighting compliance on OLTG-4-C
❑ Not Applicable .
Mandatory. Measures on.Plans Show that Outdoor Lighting Meets Outdoor Lighting Controls and Equipment
Indicate, location on plans of Note Block for Mandatory Measure
❑ Installed lighting power has been determined in,accordance'with § 130(c)1
❑ Not Applicable
All permanently installed luminaires•with lamps rated over 100 watts either have a lamp efficacy of at least 60 lumens per wattor are
controlled by a motion sensor § 132(a)
Not Applicable
AII.Luminaires. with lamps rated greater than 175 watts in hardscape areas, including parking lots, building entrances, canopies, and all
outdoor sales areas meet the Cutoff Requirements of § 132(b)
❑ Noj Applicable
All permanently installed outdoor lighting meets the Control Requirements of § 132(c)1
❑ Not Applicable } .
❑ Building facades, parking lots, garages, .canopies, and outdoor sales areas meet the Multi -Level Lighting Requirements of §.132(6)2 .
❑ Not Applicable
MANDATORY AUTOMATIC CONTROLS
CONTROL LOCATION
CONTROL
IDENTIFICATION
CONTROL TYPE
Auto Time Switch/Photosensor, etc
AREA CONTROLLED
NOTE TO
FIELD
2005 Nonresidential Compliance Forms Match 2005
SIGN .LIGHTING COMPLIANCE OLTG-4-C
PROJECT NAME cc
rC0 V'% C 2
DATE
Alternative 1 -.Lighting Power Allowances
Alternative 2 - For Signs that ONLY use one or more of the
technologies listed in M through S
Check all that ap 1
A
B
C
D E F G
H I J
K L
M
N
O
P
O
R
S
cn
3
C,
°
�_
Allotted Watts
Lamp I Ballast
Design Watts
c
et
m
a
�o
CL
A n
z
n
0
n
m�
1
M
m
a-
G
VyLocation
3 m
m$
nc _.
mac
co
Oo
o
va
&T
c"
30
��
m
T to
m
^> 5
oT
Nn.d
HnO
,n
o f.
f9
cn
i6
vO
3
m�
�
o
Nv0
M
m z
c
-3
m
3O
N
3
o
�o '�
�o
Ste'
fn
7
Z
F 'For Allotted LPD use 12 watts/square foot for Internally Illuminated Signs,
and us 2.3 watts/ft
for Externally
Illuminated
Signs.
Note: If an Internally Illuminated or Externally Illuminated sign contains light sources and ballasts other than those included in columns (M).through (S), such
• as incandescent lamps, .medium base sockets, magnetic ballasts, etc, then the sign must comply. under Alternative 1.. However, unfiltered signs, and
unfiltered portions of Internally and Externally illuminated signs, are not required to meet these Standards. '
2005 Nonresidential Compliance Forms
April 2005