The URL can be used to link to this page

06-3583 (CSCS)P.O. BOX 1504 78-495CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING& SAFETY DEPARTMENT BUILDING PERMIT ' Applicant: /Architect or EEnngiinnee/r-.160 C'Z77� LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that.) am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: B License No::. 355353 Date: Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury, that I am exempt from the Contractor's State License Law for the following reason ISec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees,. provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or ), improve for the purpose of sale.). I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.. T 7044, Business and Professions Code: The Contractors' State License Law does_not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the. Contractors' State License Law.). . (_ 1 I am exempt under Sec. , B.&P.C. for this reason \'Date: IV— 0 /—y-O�Vwner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued ISec. 3097, Civ. C.I. Lender's Name: Lender's Address: LQPER-sIIT Owner: WASHINGTON 111 LTD C/O JACK TAR 30240 RANCHO VIEJO RD. STE SAN JUAN C. Contractors WL BUTLER 7 GOODYEAR IRVINE, CA (949)587-2 Lic. No.: •VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 B ------------------ WORKER'S COMPENSATION DECLARATION Date: 4/04/07 I hereby affirm under penalty of.perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for. the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued: My on compensation _ insurance carrier and policy number are: Carrier R DWOOD FIRE Policy Number W7337560 certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the, workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, Inshall fo with comply with those provisions. Date: -d7 �4pplicant: I-,�Y WARNING: FAILURE TO SECURE WORKERS'. COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta; its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. ' 1 certify that I have read this application and state that the above information is correct. I agree to comply with all. city and county o inances and state laws relating to building construction, and hereby authorize representatives of this county to en r uponthe above-mentioned propert/►�/for/i/nylspectioJn�purposes. Date: _� -O Signature (Applicant or Agent): L`fl`1 / 1 Application Number 06-00003583 Property -Address: 46600 --WASHINGTON ST APN: 643-020-999-3 -30903 - Application description: NEW COMML - STORES . & CUSTOMER SERVICE Property Zoning: REGIONAL COMMERCIAL Application valuation: 410556 Applicant: /Architect or EEnngiinnee/r-.160 C'Z77� LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that.) am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: B License No::. 355353 Date: Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury, that I am exempt from the Contractor's State License Law for the following reason ISec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees,. provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or ), improve for the purpose of sale.). I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.. T 7044, Business and Professions Code: The Contractors' State License Law does_not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the. Contractors' State License Law.). . (_ 1 I am exempt under Sec. , B.&P.C. for this reason \'Date: IV— 0 /—y-O�Vwner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued ISec. 3097, Civ. C.I. Lender's Name: Lender's Address: LQPER-sIIT Owner: WASHINGTON 111 LTD C/O JACK TAR 30240 RANCHO VIEJO RD. STE SAN JUAN C. Contractors WL BUTLER 7 GOODYEAR IRVINE, CA (949)587-2 Lic. No.: •VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 B ------------------ WORKER'S COMPENSATION DECLARATION Date: 4/04/07 I hereby affirm under penalty of.perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for. the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued: My on compensation _ insurance carrier and policy number are: Carrier R DWOOD FIRE Policy Number W7337560 certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the, workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, Inshall fo with comply with those provisions. Date: -d7 �4pplicant: I-,�Y WARNING: FAILURE TO SECURE WORKERS'. COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta; its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. ' 1 certify that I have read this application and state that the above information is correct. I agree to comply with all. city and county o inances and state laws relating to building construction, and hereby authorize representatives of this county to en r uponthe above-mentioned propert/►�/for/i/nylspectioJn�purposes. Date: _� -O Signature (Applicant or Agent): L`fl`1 / 1 Application Number 06-00003583 Structure Information 9,355SF RETAIL SHELL/V-NR/SPRINKLERED- ---- Other struct info . . . CODE EDITION 2001/2005 FIRE SPRINKLERS YES MIXED-USE OCCUPANCY M/B/A-3 OCCUPANT LOAD .00 PATIO SQ FTG 220.00 1ST FLOOR SQUARE FOOTAGE 9355.00 Permit . . .. BUILDING PERMIT Additional desc RETAIL SHELL BUILDING Permit Fee 1728.00 Plan Check Fee 1123.20 Issue Date Valuation 410556 Expiration Date 10/01/07 . Qty Unit Charge Per Extension BASE FEE: 639.50 311.00 3.5000 THOU BLDG 100,001-500,000 1088.50 -------- Permit.. . . . . . ELEC-NEW COMMERCIAL Additional ec. Permit Fee 202:10 Plan Check Fee 50.53 Issue Date Valuation 0 Expiration Date. . 10/01/07 Qty Unit Charge Per Extension BASE FEE 15.00 9355.00 .0200 ELEC GARAGE OR NON-RESIDENTIAL 187.10 Permit . . MECHANICAL . Additional desc Permit Fee 242.50 Plan Check Fee 60.63 Issue Date Valuation 0 Expiration Date 10/01/07 Qty `Unit Charge Per Extension BASE FEE" .15.00 7.00 9.0000 EA MECH FURNACE <=100K 63.00 1.00 4.5000 EA MECH VENT INST/ DUCT ALT 4.50 1.00 9.0000 EA MECH B/C <=3HP/100K BTU 9.00' 6.00 16.5000 EA MECH B/C >3-15HP/>100K-500KBTU 99.00 8.00 6.5000 EA MECH VENT FAN 52.00• Permit . . PLUMBING LQPERAUT Application Number . . . . . 06-00003583 " Permit . . . PLUMBING Additional desc . Permit Fee .'. 264:00 Plan Check Fee 66-00 Issue Date . . . . Valuation . . . . 0 Expiration Date 10/01/07 Qty Unit Charge Per Extension BASE FEE 15.00 24.00 6.0000 EA PLB FIXTURE 144.00 1.00 15.0000 EA -PLB BUILDING SEWER .15.00 3.00 6.0000 EA PLB ROOF DRAIN 18.00 8.00 7.5000 EA PLB WATER HEATER/VENT 60.00 1.00 3.0000 EA PLB WATER INST/ALT/FEP 3.00 3.00 3.0000 EA PLB GAS PIPE:1-4 OUTLETS 9.0.0 Permit GRADING PERMIT Additional desc . Permit Fee 15.00 Plan Check Fee .00 Issue Date Valuation 0 Expiration Date 10/01/07 Qty Unit Charge_ Per Extension BASE FEE 15.00 ------ -------------------------------- ---------------------- 'Special Notes. and Comments 9,355SF COMMERCIAL SHELL/V=NR/FULLY SPRINKLERED. SHOPS 3 - (5.UNITS).. 2001. BUILDING, MECH, PLUMB, 2004 ELECTRICAL, 20.05 ENERGY. THIS PERMIT DOES NOT INCLUDE BLOCKWALLS, SITE LIGHTING, WATER FEATURES OR TRASH ENCLOSURES. February 20, 2007 3:27:-34 PM AORTEGA PERMIT 06-3583 REPLACES APPLICATION 05-1937 EXPIRED.ON 05/1.4/2006. April 3, 2007 10:56:17 AM bhanada Other Fees . . . . ACCESSIBILITY PLAN REVIEW 112.32. ART IN PUBLIC PLACES -COM 2032.78 DIF CIVIC CENTER - COMM 3012.31 ENERGY REVIEW FEE 112.32 DIF FIRE.PROTECTION-COMM 420.97 GRADING PLAN CHECK FEE 15.00 STRONG MOTION (SMI) _ COM 93.72 DIF STREET MAINT FAC -COMM 991.63 DIF TRANSPORTATION - COMM 28429.84 - Fee summary Charged Paid Credited Due LQPEPA11T Application Number 06-00003583 --- 'Permit Fee Total ------ - - -- 2451.'60 ---- - - - - - - ---------- .00' .00 -=-------- 2451.60 Plan Check Total 1300.36 900.00 .00 400.36 Other Fee Total 35220.89 .00 .00 35220.89 Grand Total 38972.85 900.00 .00 38072.85 LQPE"Hr CERTIFICATE OF COMPLIANCE 4�J� tIED Desert Sands Unified School District 47950 Dune Palms Road ¢ BERMUDADUNES O I) RANCHO MIRAGE Date 2/26/07 La QUmta, CA 92253 INDIAN WELLS ti No. 29260 (760) 771-8515 0, P LA QUINT Q INDIO y✓ O Owner Bill Sanchez APN # 643-020-999 Address Jurisdiction Palm Desert city Zip Permit # Tract # Study Area Type Commercial No. of Units 1 Lot #. No. Street S.F.' Lot # No. Street S.F. Unit 1 46600 Washington Street 9284 Unit 6 Unit 2 . Unit 7 Unit 3 Unit 8 Unit 4 Unit 9 Unit 5 Unit 10 Comments , At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/Walkways, residential additions under 5 00 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile ho mes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason: EXEMPTION NOT APPLICABLE This certifies that school facility fees imposed pursuant to Education Code Section 17620 and Government Code 65995 Et Seq. in the amount of $0.42 X 9,284 , S.F. or $3,899.28 have,been paid for the property listed above and that building permits and/or. Certificates of Occupancy for this square foota9e in this proposed project may now be issued. Fees Paid By OC/City National Bank - Bill Sanchez Check No. 240501846 Name on the check Telephone 342.2674 Funding Commercial By Dr. Doris Wilson Superintendent Fee collected lexemple y Sh O vrey Payment Recd U:00 $3,899.28 Over/Under -t Signature Y a e NOTICE: Pursuant to Government Code Section 66020(d)( , this wi serve to notify you that the 90 -day approval period In which you may protest the fees o r other payment identified above Will begin to run from the to on ich the building or installation permit for this project is issued, or from the date on which those amounts are paid to the District(s) or to another publ c entity uthorized to collect them on the District('s) behalf, whichever is earlier. NOTICE: This . ocument NOT VALID if Duplicated Embossed Original - Building Department/Applicant Copy - Applicant/Receipt Copy - Accounting 1 RECORDING REQUESTED BY: Washington -ill, LTD 80=1618 Declaration Ave Indio, CA 92201 t ORDER NO.: ` ESCROW NO.: AND WHEN RECORDED MAIL TO: Washington -111, LTD C/O Jack Tarr 80240 Rancho Viejo Road, Suite B San Juan Capistrano, CA 92675 A.P.N. 643-020-040,.643-020-037 and 643-020-043 DOC.# 2007-0213040 03/29/2007 08:00A Fee:40.00 Page 1 of 12 Recorded in Official Records County of Riverside Larry W. Ward Assessor, County Clerk & Recorder. 1111111 1111111 (IIII VIII I III VIII IIIIII III VIII IIII IIII S R I U PAGE SIZE DA MISC LONG RFD COPY M A L 465 426 CO LCOR SMF NCHG EXAM C 1 806 USE) , - GRANT DEED (CORPORATION) THE UNDERSIGNED GRANTORS) DECLARE(S) THAT DOCUMENTARY TRANSFER TAX IS $ � (County) $ (City) [I computed on full value of property conveyed, or , ❑ computed on full value less liens or encumbrances remaining at time of sale . ❑ unincorporated area ❑ City of AND FOR A VALUABLE CONSIDERATION, RECEIPT OF WHICH IS HEREBY ACKNOWLEDGED, Washington -111 LTD A California Limited Partnership a Corporation, organized and existing under the laws of the State of California hereby GRANT(S) to Washington -111 LTD A California Limited Partnership the following described real property in the City of La Quinta ,.County of Riverside , State of California See Exhibits A and B attached hereto and by reference made a part hereof., Note: This grant deed implements the revised lot configurations pursuant to'Lot Line Adjustment 2006-469 as approved by the City of La Quinta. All Property subject to this lot line adjustment is owned by a single entity, hence ownership conveyance is a nonessential secondary function of this deed. The primary function of the deed is to provide constructive notice of the revised lot configurations pursuant to Government Code Section 66412 (d), and to perfect the intent of the Lot Line,Adjustment 2006-469 as approved. Washington -111, LTD A California Limited Partnership g By: Washington -111, LTD. Managing Member Dated BY: I I =1 V V-1 Jack Tarr, Authorize igner - Washington -111 LTD. BY: MAIL TAX STATEMENTS TO PARTY SHOWN ON THE FOLLOWING LINE; IF NO PARTY SHOWN, MAIL AS DIRECTED ABOVE Name Street Address• City & State Grant Deed - corporation 01.06 STATE OF CAI, i FO R.w r %} COUNTY OF _' 0 (LAT) CrE n ON 1 I A?Lra.� rl , a00 % BEFORE me M A-aT —T/� 6 A (7 i'U /5I•!e 11a ir3nU Mile Of Lne Officer) ` personally appeared 'thcy-- TiA4g— personally known tome (epmpfeued-to—meet ) to be the person(s)-whose name(,$) is/arc-subscribed to the within instrument and acknowledged to me that he/shq/thy executed the same in his/4�r/t#teir authorized capacity(ies), and that by his/her/t4eir signature(s) on the instrument the person(&) or the entity upon behalf of which the person(s) acted, executed the instrument. WITNESS my ha�d and official seal. MARTHA INGA Signature Commission # 1408921 -4 Notary Public - California Orange County My Comm. Expires Apt ), 20071(rnis area for official notary sea]) MAIL TAX STATEMENTS TO PARTY SHOWN ON THE FOLLOWING LINE; IF NO PARTY SHOWN, MAIL AS DIRECTED ABOVE Name Street Address City & State Grant Deed - Corporation 01-06 EXHIBIT "A" ' LOT LINE ADJUSTMENT 06-469 LEGAL DESCRIPTION ADJUSTED PARCEL "A" . IN THE CITY OF LA QUINTA, RIVERSIDE.COUNTY, STATE OF CALIFORNIA, BEING PARCEL 4 OF AMENDED PARCEL MAP NO. 32683-3 AS SHOWN IN PARCELMAP BOOK 219, PAGES 58 THROUGH 61, INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA. TOGETHER WITH THAT PORTION OF PARCEL 2 OF PARCEL MAP NO. 32683-2 AS SHOWN IN PARCEL MAP BOOK 213, PAGES 19 THROUGH 21, INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA, MORE PARTICULARLY DESCRIBED AS FOLLOWS: BEGINNING AT THE SOUTHEAST CORNER OF PARCEL 4 OF SAID AMENDED PARCEL MAP NO. 32683-3; THENCE NORTH 41008'18" WEST 202.03 FEET ALONG THE EASTERLY LINE OF SAID PARCEL 4; THENCE NORTH 48051'47" EAST 22.04 FEET; THENCE. SOUTH 41008 5 17" EAST 44.00 FEET; THENCE SOUTH 48051'42" WEST 20.51 FEET; THENCE SOUTH 41009'19" EAST 158.03 FEET; THENCE SOUTH 48°51'42" WEST 1.58 FEET ALONG THE PROLONGATION OF THE SOUTHERLY LINE OF PARCEL 4 TO THE POINT OF BEGINNING. SAID DESCRIBED PARCEL ."A" CONTAINS 1.33 ACRES, MORE OR LESS. FOR GRAPHICAL PURPOSES SEE EXHIBIT "B" ATTACHED HERETO AND BY THIS REFERENCE MADE A PART HEREOF. pared under the supervision of: LAND S�� ; - Date: z) vF� �P . E . p0 GFA . Angela Dorf, P.L.S. #8 10 �w� Expires 12/31/08 No. 8010 STANTEC CONSULTING _ EXP: 12/31/08 73-733 Fred Waring Dr., Suite 100: PalmgDesert, CA 92260 (760) 346-9844 OF CAQF��\P { LOT LINE ADJUSTMENT No.'. A = 46 9 APPROVED BY CITY OF LA OUINTA COMMUNITY -DEVELOPMENT DEPARTMENT BY , M6e, ¢✓ DATE Exhibit Ply cel . Page 2 of 7 + EXHIBIT «Ap, LOT LINE ADJUSTMENT,06-469 LEGAL DESCRIPTION EXISTING PARCEL "B" IN THE CITY OF LA QUINTA, RIVERSIDE COUNTY, STATE OF CALIFORNIA, BEING PARCEL 2 OF AMENDED PARCEL MAP NO. 32683-3 AS SHOWN IN.PARCEL MAP BOOK 219, PAGES 58 THROUGH 61, INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA. EXHIBIT "A LOT LINE ADJUSTMENT 06-469 LEGAL DESCRIPTION ADJUSTED PARCEL "B" IN THE CITY, OF LA QUINTA, RIVERSIDE COUNTY, STATE OF CALIFORNIA, BEING PARCEL 2 OF AMENDED PARCEL MAP NO. 3268373 AS SHOWN IN PARCEL MAP BOOK 219, PAGES 58 THROUGH 61, INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA. TOGETHER WITH THAT PORTION OF PARCEL 2 OF PARCEL MAP NO. 32683-2 AS SHOWN IN PARCEL MAP BOOK 213, PAGES 19 THROUGH 21, -INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA, MORE PARTICULARLY DESCRIBED AS FOLLOWS: BEGINNING AT THE NORTHEAST CORNER OF PARCEL 2 OF SAID AMENDED PARCEL MAP NO. 32683-3; THENCE SOUTH 41008'18" EAST 1.69 FEET; THENCE SOUTH 48046'58" WEST'85.15 FEET; THENCE SOUTH 41008'17" EAST 24.13 FEET; THENCE SOUTH 48°51'43" WEST 13.00 FEET; THENCE NORTH 41008'17" WEST 25.94 FEET; THENCE NORTH 48°51'42" EAST 98.16 FEET TO THE POINT OF BEGINNING. SAID DESCRIBED PARCEL "B" CONTAINS 27,380 SQUARE FEET, MORE OR LESS. FOR GRAPHICAL PURPOSES - SEE EXHIBIT "B". ATTACHED HERETO AND BY THIS REFERENCE MADE APART HEREOF. tired under the supervision of: T �,0 LAND- Dater w�\1 E' Op,F,GFo 3 " Angela JE. Dorf, P.L:S.' AM 10 Expires 12/31/08 No. 8010 STANTEC CONSULTING 73-733 Fred Waring Dr., Suite 100 Exp. 12/31/08 Palm Desert, CA 92260, (760) 346-9844 �TgTF OF 'LOT LINE ADJUSTMENT No. 06" q6 9 APPROVED BY CITY OF LA OUINTA COMMUNITY DEVELOPMENT DEPARTMENT BY A, Nbe12,S_�, DATE 3 •' Z $-off . Page 4 of 7 Exhibit A Pk C21 B EXHIBIT "A LOT LINE ADJUSTMENT 06-469 LEGAL DESCRIPTION Page 5 of 7 EXHIBIT «A" LOT LINE ADJUSTMENT 06-469 LEGAL DESCRIPTION ADJUSTED PARCEL "Cl) IN THE CITY OF LA QUINTA, RIVERSIDE COUNTY, STATE OF CALIFORNIA, BEING PARCEL 2 OF PARCEL MAP NO. 32683-2 AS SHOWN IN PARCELMAP BOOK 213, PAGES 19- THROUGH 21; INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA, EXCEPTING . THEREFROM THE FOLLOWING DESCRIBED AREA: BEGINNING AT THE SOUTHEAST CORNER OF PARCEL 4 OF AMENDED PARCEL MAP ' 32683-3 AS SHOWN IN PARCEL MAP BOOK 219„ PAGES 58 THROUGH 61, INCLUSIVE, RECORDS OF RIVERSIDE COUNTY, STATE OF CALIFORNIA; . . THENCE NORTH 41008'18" WEST 202.03 FEET ALONG THE EASTERLY LINE OF SAID PARCEL' 4;. THENCE NORTH 48°51'47" EAST 22.04 FEET; THENCE SOUTH 41008'17" EAST 44.00 FEET; THENCE SOUTH 48°51'42" WEST 20.51 FEET; THENCE SOUTH 41009'19" EAST 158.03 FEET; THENCE SOUTH 48°51'42" WEST 1.58 FEET ALONG THE PROLONGATION OF THE SOUTHERLY LINE OF PARCEL 4 TO THE POINT OF BEGINNING. ALSO EXCEPTING THEREFROM THE FOLLOWING DESCRIBED AREA: BEGINNING AT THE NORTHEAST CORNER OF PARCEL2 OF SAID AMENDED PARCEL MAP NO. 32683-3; THENCE SOUTH 41008'18" EAST 1.69. FEET;,' THENCE SOUTH 48046'58" WEST 85.15 FEET; THENCE SOUTH 41008'17" EAST 24.13 FEET; THENCE SOUTH 48°51'43" WEST 13.00 FEET; ' THENCE NORTH 41008'17" WEST 25.94 FEET; THENCE NORTH 48°51'42" EAST 98.16 FEET TO THE POINT OF BEGINNING. SAID DESCRIBED PARCEL "C" CONTAINS 3.61 ACRES, MORE OR LESS. LOT LINE ADJUSTMENT No. 06-q69 APPROVED BY CITY OF LA QUINTA COMMUNITY DEVELOPMENT DEPARTMENT BY 4 • mll&ser DATE '3.2$• o'7 Page 6 of 7 Exhibit A-ce 1 C EXHIBIT «A„ LOT LINE ADJUSTMENT 06-469 LEGAL DESCRIPTION FOR GRAPHICAL PURPOSES SEE, EXHIBIT "B" ATTACHED HERETO AND BY THIS REFERENCE MADE A PART HEREOF.' P e red under the supervision of: Date: 13 LAND Angela E. Dorf, P.L.S. #8b.10 Expires, 12/31/08 w STANTEC CONSULTING - No. 8010 73-733 Fred Waring Dr., Suite 100 Palm Desert, CA 92260 Exp..t 2/31 /os (760) 346-9844 qTF OF CA, � l LOT LINE ADJUSTMENT No. 06.%16 9 APPROVED BY CITY OF LA OUINTA COMMUNITY DEVELOPMENT DEPARTMENT BYP•Mo!aP.tSPi✓ DATE3'2$ o� Exhibit A. Page 7 of 7 AMENDED PARCEL MAP* NO. 32683-3 PMB 219158-61 i 17 N89'41''09"E 166.81' SHEET 1 OF 2 , kti y � � 69 •vo•`p�z 2?� ,-Ak,o�` 2 •a�I s�� _ �h� h�E nQ` �6� � I �9 . bh6. -9 n �.. / P P� R� LINE DATA 4C' 5 N89'41'36"E 161.34' N00-1871 "W 78.55' L1 'scow\ NO. BEARING DISTANCE L 1 N89'41'09"E 6.79' L2 N00'19'14"W 25.48' 13 N48'46 58"£ 85.15' . LOT LINE ADJUSTMENT No. 06'-f69 APPROVED BY CITY OF LA OUINTA CO MUNITY DEVELOPMENT DEPARTMENT BY • (n0 P,+sw DATE4K- oZ Exhibit I3 I of Z NEW LOT LINE ' EXISTING LOT LINE TO REMAIN NOTE- THIS LOT LINE ADJUSTMENT DOESN'T AFFECT OR SUPERCEDE ANY EXISTING LOT LINE EXISTING EASEMENTS ON THE - — - TO BE DELETED PROPERTY SCALE: 1" = 150' LOT. LINE ADJUSTMENT 06-469 LAND PREPARED UNDER THE �,kF �,P `' O� SUPERVISION OF. No.' 8010 ' E� 12/31/08 ANGELA DORF, P.L.S. 010 DATE CF CP,,01 20150889.00 STANTEC CONSULTING INC. 73-733 FRED WARING DRIVE. SUITE 100 PALM DESERT, CA. 92260 r Stant6C 760.346.9844 stanteu m EXHIBIT "B" SHEET 2' OF 2 y -O '' . • 'a 'mss .. %• �- � .•yam • r • /(1 �7;o-- . \ y -k , ' .. 'oma \ - • , OT LINE ADJUSTMENT No. 06 `4 6 9\ ti . :. t • \\ mss!• PPROVED BY CITY OF LA OUINTA OMMUNITY DEVELOPMENT DEPARTMENT \ Y 4 • M. DATE 2 Fs- o Xhibit 1 2 or Z- ,o \ 20150889.00 STANTEC CONSULTING INC. 73.733 FRED WARING DRIVE 100 LOT LINE ADJUSTMENT N0. 06-469 SCALE' 40, PALM DESERT, CA 92260 StanteC 760.346.9844 stamecc«n l John R. Hawkins Fire Chief Proudly serving the Unincorporated Areas of Riverside County and the Cities of:. Banning s• Beaumont Calimesa Canyon Lake Coachella Desert Hot Springs Indian Wells Indio Lake Elsinore La Quinta Moreno Valley Palm Desert Perri s Rancho Mirage San Jacinto Temecula Board of Supervisors Bob Buster, District I John Tavaglione, District 2 Jim Venable, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT In cooperation with the California Department of Forestry and Fire Protection 210 West San Jacinto Avenue • Perris, California 92570 • (909) 940-6900 • Fax (909) 940-6910 December 1, 2006 To: City of La Quints Building Department Re: Release for Building Permits LAQ-05-BP-047; LAQ-06-BP-027 & LAQ-06-010_/Washington Park "'V6-660 W,,J,;"• N -1 6--63o IJtsti. Jrr,y[ca Lu".� The Riverside County Fire Department hereby releases the above referenced project for issuance of a building permit at the discretion of the Building Department. Respectfully, Tracy Hobday Chief Fire Department Planner By pt Sonia CooleFire Safety Specialis HIPEPGENERALTORMSOdg Pomtil Release - LQ.doc EMERGENCY SERVICES DIVISION • PLANNING SECTION • INDIO OFFICE 82-675 Highway 111, tad FI., Indio, CA 92201 • (760) 863-8886 • Fax (760) 863-7072 John R. Hawkins Fire Chief Proudly serving tJ Unincorporated Areas of Riversid County and the Cities of: Banning Beaumont Calimesa Canyon Lake Coachella Desert Hot Spring Indian Wells Indio Lake Elsinore La Quinta Moreno Valley Palm Desert Perris Rancho Mirage San Jacinto Temecula Board of Supervisoi Bob Buster, District I John Tavaglione, District 2 Jim Venable, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT In cooperation with the California Department of Forestry and Fire Protection 210 West San Jacinto Avenue • Perris, California 92570 • (909) 940-6900 • Fax (909)-640-6910 December 1, 2006 Washington 111, Ltd 3i- i ✓, s�<<,�7 s 30240 Rancho Viejo Road, Bldg B San Juan Capistrano, CA 92675 y6 1,/, 4 ineTbn •S; FSilys Re: Water System Plan Review PM 32683 (LAQ-05-BP-047, LAQ-06-BP-027, LAQ-06-BP-010) Washington Park, La Quinta, CA The above referenced water plans have been reviewed and are acceptable by the Riverside County Fire Department. The County Fire Department must witness the following tests: 1: A hydrostatic test of 200 -psi pressure for two (2) hours or at 50 psi in excess of the maximum static pressure when it is in excess of 150 psi shall be witnessed by a fire inspector prior to covering piping joints. 2.. System flush inspection. 3. A final inspection is required. Blue retro -reflective pavement markers shall be mounted on private streets, public streets and driveways to indicate location of fire hydrants. All questions regarding the meaning of these conditions should be referred to the Fire Department Planning & Engineering staff at (760) 863-8886. Sincerely, Tracy Hobday Chief Fire Department Planner By. �SoniaCooley Fire Safety Specialist _ EMERGENCY SERVICES DIVISION • PLANNING SECTION • INDIO OFFICE 82-675 Highway 111, 21d FI., Indio, CA 92201 • (760) 863-8886 • Fax (760) 863-7072 Craig E. Anthony Fre Chief Proudly serving the uninoorporated areas of Riverside County and the Cities of: BwMing Beaumont O Calimesa c Canyon Lake O Coachella Desert Hot Springs 46 Indian Wells v Indio Lake Elsiaore c La Quinta Moreno Valley 4 Palm Desert O Penis O Rancho Mirage 0 San Jacinto 4. Temecula Board of Supe vism I Dob Buster, . District t John Tavaglione, District 2 Jeff stme, District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT 82-675 HighwM 111, 2- H., IrOo. CA 92201 . (160y8634W -0- Fax (760)163-7072 May 25, 2005 KKE Architects, Inc. 20321 SW Birch Street Newport Beach, CA 92660 Re: Non -Structural Building Plan Review LAO -05 -BP -047 / 46-600 Washington St. Sh•ps - 3 Fre Department personnel have reviewed and approved the plans you submitted for the above referenced project. Please be advised the following conditions apply as a part of the conditions for the issuance of a building permit. 1) These conditions are for a shell building and will receive a shell final only. No fire and life safety clearance will be issued for a tenant space until the specific occupancy classification has been established and tenant improvement plans have been reviewed and conditioned by the Riverside County Fre Department. 2) Fre Department approval is based upon the 2001 CBC requirements for Group B or M occupancies. It is prohibited to use, process or store any materials in the occupancy that would classify it as a Group H occupancy per Sec. 307 of the 2001 CBC. 3) The Fre Department is required to set a minimum fire flow for the remodel or construction of all commercial buildings using the procedure estabrished in the 2001 CFC. A fire flow of 1500 gpm for a 2 -hour duration at 20 psi residual operating pressure must be available before any combustible material is placed on the job site. 4) The required fire flow shall be available from a Super hydrant(s) (6" x4* x 21/2"x 21/27 located not less than 25 or more than 165 from any portion of the building(s) as measured along approved vehicular travel ways. 5) Prior to the issuance of a building permit, applicant/developer shall furnish one blueline copy of the water system plans to the Fre Department for review. Plans shall conform to the fire hydrant types, location and spacing, and the system shall meet the fire flow requirements. Plans must be signed by a registered CM Engineer and/or the local water company with the following certification: "I certify that the design of the water system is in accordance with the requirements prescribed by the Riverside County Fire Department'. 6) Install a complete fire sprinkler system per NFPA 13. The post indicator valve and fire department connection shall be located to the front within 25' to 50' of a hydrant, and a minimum of 25' from the building. System plans must be submitted to the Fre Department for review, along with a plan/inspection fee. The approved ptans,.with Fire Department Job card must be at the job site for all inspections. 7) Whenever sprinkler overhead mains of.4' size or larger are provided, the Riverside County Fre Department requires documentation from a structural engineer that the roof structural members will be capable of supporting the weight of the water filled mains and attached Ones. Provide appropriate detailed documentation, with a wet stamp and signature, by the project structural engineer. EMERGENCY SERVICES DIVISION • PLANNING SECTION • INDIO OFFICE' 82-675 Highway 111, 2M FI., Indio, CA 92201 • (7 60) 863-8866 • Fax (760) 863-7072 8 Install an alarm monitoring.,' µ system for fire sprinkler`systems)s) with 100 or more heads (20 or more in Group I, Division 1.1 and 12 occupancies)' Valve monitoring, water -flow alarm and trouble signals shall be automatically transmitted to an approved central station, remote station or proprietary monitoring station to accordance with 2001 CBC, Sec. 904.3.1. An approved audible sprinkler flow alarm shall be provided on the exterior in an approved location and also in the interior in a normally occupied location. A C-10 licensed contractor. must submit plans, designed in accordance with NFPA 72, 1999 Edition, to the. Fire Department for review and approval prior to installation. 9) Install Knox Key,Lock box, Model 3200, mounted per recommended standard of the Knox Company. If the building/facility is protected with a fire alarm system or burglar alarm system, the lock boxes will require "tamper" monitoring. Special forms are available from this office for the ordering of the Key Switch. This form must be authorized and signed by this office for the'correctly coded system to be purchased. 10) All egress doors shall comply with CBC Sec. 1003.3.1.8 for proper door hardware and as noted on Sht. A501 of the building plans. Egress door hardware shall consist of single -operation, common knowledge type hardware. Double -keyed or thumb latch cylinder locks are not permissible on doors noted. 11) Install portable fire extinguishers per Title 19, but not less than 2A1 OBC in rating. Contact certified extinguisher, company for proper. placement of equipment. 12) Approved buikfing address shall be placed in such a position.as to be plainly visible and legible from the street and rear access if appricable. Bumirig address numbers shall be a minimum of 12' for buildings) up to. 25' in height, and 24' in height for build rigs) exceeding 25' in height. In multi -tenant buildings, businesses shall post the business name and suite number on back doors as well as the front. Suite numbers or letters must be a minimum of 6' In height All addressing must be legible and of a contrasting color with the background. 13) Electrical room door shall be posted 'ELECTRICAL ROOM' on the outside of door. Please contact the Fire Department Planning & Engineering staff for final inspection prior to occupancy. Applicantlinstaller shall be responsible to contact the Fire Department to schedule inspections. Requests for inspections are to be made at least 72 hours in advance and may be arranged by calling (760) 863- 8886. All questions regarding the meaning of these conditions should be'referred to the Fire Department Planning & Engineering staff at (760) 863-8M., Sincerely, *FRANK KAWASAKI Chief Fire Department Planner BY Wafter Brandes Fire Safety Specialist Cc: City of La Quinta.— Building Dept t TITLE 24 REPORT Title 24 Report for. Washington Park : Shops 3 46-600 Washington Street La Quinta, CA 92253 Project Designer: KKE Archite'c 'ts, Inc 4 Executive Circle,', -Suite 190 Irvine, CA -9261'4 .(949) 222-11233 Report Prepared By: SIA GARESTANI, P.E. SPEC Engineering 6800 Owensmouth Ave. #140 Woodland Hills, CA 91303, (818) 592-6643 - CITY OF LA QUINTA BUILDING& SAFETY DEPT. .,,bb Number: APPROVED.. 05-127 FOR CONSTRUCTION DATES I Date: 3/7/2007 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy. Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed, by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: 05-127 User Number: 3358 EnergyPro 4.3 by EnergySoft Job Number• 05-127 User Number: 3358 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 1 of 3 PERF -1 ROJECT NAME _ _Washington_Park Shops 3 ROJECT ADDRESS _ _ 46-600 Washington Street La Quinta RINCIPAL DESIGNER - ENVELOPE KKE Architects, Inc DOCUMENTATION AUTHOR SPEC Engineers ENERAL INFORMATION ---- — - — - - DATE .- -- - — - 3/7/2007 —'TELEPHONE Building Permit # _ (949) 222-1_233 TELEPHONE _ � _ (818) 592-6643 Checked by/Date Enforcement Agency Use_ _ j Ivra i r_ yr rLANQ 'BUILDING CONDITIONED FLOOR AREA :CLIMATE ZONE 03-06-07I _ 9,284Sq.Ft. _ _ 15 _ BUILDING TYPE NONRESIDENTIAL HIGH RISE RESIDENTIAL HOTEL/MOTEL GUEST ROOM - PHASE OF CONSTRUCTION FXI NEW CONSTRUCTION E] ADDITION — L_ EXISTING + ADDITION/ALTERATION ISTATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation is accurate and c tDAf mplete.DOCUMENTATION AUTHOR SIGNATURE E SIA GARESTANI, P.E./'`� �'�� The Principal Designer hereby certifys that the proposed building digs' n rep ented in this set of construction documents is consistent with the other compliance forms and worksheets, with tt e specifications, and with any other calculations submitted with this permit application. The proposed building as designed meets Te energy efficiency requirements contained in sections 110, 116, through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ENV. LTG_. MECH. J jUd I 11VICUy 01111111 UIL , dill eny1Uie unuer ine provisions or ulvlslon 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer, mechanical engineer, or I am a licensed architect. ❑ 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. (� F_ 3. 1 affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ENVELOPE COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures - — - - _ Required Forms ENV -1 _ PRINCIPAL ENVELOPE DESIGNER - NAME SIGNATURE - iLIC. NO FbATE - KKE Architects Inc i LIGHTING COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures (Lighting Compliance Not In The Scope Of Required F s I MS Submittal---- — -- --- - — -- --- PRINCIPAL LIGHTING DESIGNER - NAME SIGN LIC. NO. DATE MECHANICAL COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures Required Forms MECK-1, MECH-2 MECH-3- MECH-5 _-- - PRINCIPAL MECHANICAL DESIGNER -NAME SIGNATURE iLIC. NO. DAT SIA GARESTANI, P.E. iM M g�-2hn I I -I -- - - - EnergyPro 4.3 by EnergySoft _ - User Number: 58Job Number: 05-127 - _ — _ _ - — Page:3 of 22 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 2 of'3 PERF -1 PROJECT NAMEDATE Washin ton Park Sho s 3 3/7/2007 ANNUAL TDV ENERGY USE SUMMARY (kBtu/sgft-yr) Standard Proposed Compliance ENERGY COMPONENT ..Design Design Margin Space Heating _1.50. 0.89 • 0.61• Space Cooling 391.97 ' • 385.85 ' . 6.12 Indoor Fans .42.11 46.84 -4.73 Heat Rejection. 0.00 0.00 0.00 Pumps & Misc. 0.00 0.00 0.00 Domestic Hot Water 58.87 55.80 3.06 Lighting 165.27 165.27 • 0.00 Receptacle 82.19 82.19 0.00 Process o.00 o.o0 0.00 • w - TOTALS: 741.90 736.84 5:06 i) standard:'Pt°' ' po »ads,d�aH� � 0.�� 'tea• �8 , "� �+'0 X30 `x'605 90 120,150 180 210'240 270T300 330r380 390 ketwsgnyr Percent better than Standard: - 0.7°/d ( 0.7°/d excluding process) BUILDING COMPLIES GENERAL INFORMATION - - -- -- .. Building Orientation_ (NW) 315 deg Conditioned Floor Area -- - -9,284 sqft. i Number of Stories 1 Unconditioned Floor Area Number of Systems, 7 Conditioned Footprint Area o 0 sqft. sqft. „` Number of Zones 6 Fuel Type Natural Gas Orientation Gross Area _Glazing Area . Glazing Ratio r Front Elevation (NW) 1,706 sqft. 933 sqft. 54.7% j • Left Elevation (NE) 1,089 263 sqft. 24.1/o sqft-. i ° ; Rear Elevation (SE) .. 831 sqft. �. 0 sqft. ! 0.0%� Right Elevation (SW j 859 sqft. 523 sqft.' 60.9°/d1 � - , Total 4 485d sgft.. � _ � 1,719 sqft. 38./o 3 , Roof 8,962 sqft. [__ sgft. !- o.o°id Standard Proposed Lighting Power Density 1.500 wisgft. 1.500 wisgfc. 1 _ -Prescriptive Env. Heat Loss 1,466 Btu/h 1,756 etu/h _ l Prescriptive Env. Heat Gain 160,923 Btu/h-F ` t 226,621 Btu/h-F l Remarks: ---- - =_ - -__-- - Run Initiation Time: 03/06/07 10:45:56 Run Code: 1173206756 l EnergyPro 4.3 by EnergySoft User Number: 3358 Job Number: 05-127 Page:4 of 22 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 3 of 3 PERF-' PROJECT NAME DATE Washington Park Shops 3 '_ 3/7_/2007 _ _ ZONE INFORMATION Floor Inst. , ;CtrL ^ 14Allo' d LPD f 41?roc. - Area LPD Credits Area 1 Tailored Loads System Name Zone Name Occupancy Type (sgft.) (W/sf)1 !(W/sf)?. (W/sf)3 _"(W.`.(W/gf) RTU -1 Suite 1' Comp Bldg Retail and Wholesale 1,400 ; "1.50 ' A k a , + 4 RTU -2 Suite 1 Comp Bldg Retail and Wholesale 908 '1.50 t RTU -3 _ Suite 2 Comp Bldg Retail and Wholesale 1,228 *1.50 RTU-4 Suite 3 Comp Bldg Retail and Wholesale 1,300 "1.50 .» '.3), RTU -5 Suite 4 Comp Bldg Retail and Wholesale 1,895. '1.50 RTU -6 & RTU -7 Suite 5 Comp Bldg Retail and Wholesale = 2,553 - `1.50 0?;ttt`+ I x **fit t7t7 tk 14 lit _ } } Notes: 1. See LTG -2-C 2. See LTG -4-C '-3. See LTG -5-C • 4. See LTG -6-C Items above require speaal documentation), (items marked with asterisk, see LTG -2 -C by others) • (by others) _ EXCEPTIONAL CONDITIONS COMPLIANCE CHECKLIST Yk., 1---1 ....s - -�- -�-••--•. 1--Y-p`�l-• .....11.1.,11 .V 1110 ne111w specmea in inls cnecKnst. I nese items require special written justification and documentation, and special verification to be used with the performance approach.. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. I - The HVAC System "CARRIER 50HJQ005" is designated as 3 Phase, or is Exempted from the N_AECA 13 SEER requirement. The HVAC System "CARRIER 50HJQ004" is designated as 3 Phase, or is Exempted from the_N_AECA 13 SEER requirement. The HVAC System "CARRIER 50HJQ006" is designated as 3 Phase,- or is Exempted from the NAECA 13 SEER requirement. The Zone "Suite 1" has a North/East/South Display Perimeter Credit of 15 ft. --+--' - ---- The Zone Zone "Suite 1" has a West Display Perimeter. Credit of 22 ft. T The Zone "Suite 1 " has a North/East/South Display Perimeter Credit of 18 ft. The Zone "Suite 2" has a West Display Perimeter Credit of 12 ft.' The Zone "Suite 3" has a West Display Perimeter Credit of 12 ft. " The Zone "Suite 4" has a West Display Perimeter Credit of 51 ft. The Zone "Suite 5" has a North/East/South Display Perimeter Credit of 24 ft. The Zone "Suite 5" has a West Display Perimeter Credit of 28 ft. ThP PYronfinn'JI f—#.— 1;c#- 1 :. 41.: -- - - - - ---rr•-�-•• �rr••�a•l�11 11uvc aFcwlcauy ween reVleWeO. Adequate written justification and documentation for their use have been provided by the applicant. Authorized Signature or Stam Run Initiation Time: 03/06/07 10.45.56 Run Code' 1173206756 EnergyPro 4.3 by EnergySoft User Number: 3358 Job Number: 05-127 _Page:5 of 22 1 --- CERTIFICATE OF COMPLIANCE ENV -1 -CI PROJECT NAME DATE Washington Park Shops 3 3/_7/20.0.7 -J OPAQUE SURFACES Surface Insulation Act. Cond: Joint Appendix -- - •- # Type Area U - Fac. Jr, N, E. r, R (New, Existing, Anerea, rcemovetl) FENESTRATION SURFACES �l More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from �f Standards Table 116-A and B. Certificate shall be file tl in the contractor's project office during construction and in the building manager's office after construction # IType Cont. Azm. Tilt Status IV Reference 02-A10 -__- Cond. Stat. I Location / Comments Suite 1 Roof 1,4-0C 0.035 R-30 R-0.0 0 0 New 2 all 205 0.074 R-19 R-0.0 45 90 New 09-A5- 60 0.720 116-A 3 Wall 21 0.074 R-19 R-0.0 315 90 New 09-A5 0.720 116-A-0.70 ISuite 1 ISuite 1 Suite 1 4 Roof 908 0.035 R-30 R-0.0 0 0 New 02-A10_ NE 5 lWall 391 0.074 R-19 R-0.0 135 90 New 09-A5 _ New - 6 Wall 1 24 0.074 R-19 R-0.0 45 90 New 09-A5 _ Suite 1 7 Roof 907 0.035 R-30 R-0.0 0 0 New 02-A10 _ Suite 2 _ Suite 2 8 Wall 220 0.074 R-19 R-0.0 135 90 New 09-A5 116 -BI 9 Wall 100 0.074 R-19 R-0.0 315 90 New 09-A5_ _ Suite 2 10 Roof 1,300 0.035 R-30 R-0.0 0 0 New 02 A10 --_ Suite 3 11 Wall 220 0.074 R-19 R-0.0 135 90 New 09-A5 Suite 3 12 lWall 100 0.074 R-19 R-0.0 315 90 New 09-A5 12 Suite 3 Suite 4 13 IRoof 1,895 0.035 R-30 R-0.0 0 0 New _ 02-A10 _ 14 Wall 32Z 0.074_ R-19 R-0.0 270 90 New _ 09-A5 116-B Suite 4 15 Wall 1771 0.074 R-19 R-0.0 315 90 New 09-A5 Suite 4 16 Wall 104 0.074 R-19 R-0.0 225 90 New _ 09-A5 Suite 4 17 Roof 2,553 0.035 R-30 R-0.0 0 0 New 02-A10 Suite 5 Suite 5 18 Wall 32 0.074 R-19 R-0.0 315 90 New 09-A5 _ 19 Wall 153 0.074 R-19 R-0.0 0 90 New 09-A5 09-A5_-- I Suite 5 Suite 5 20 Wall 200 0.074 R-19 R-0.0 _2_7_01 90 New N, E. r, R (New, Existing, Anerea, rcemovetl) FENESTRATION SURFACES �l More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from �f Standards Table 116-A and B. Certificate shall be file tl in the contractor's project office during construction and in the building manager's office after construction # IType I Comments Area U -Fac' I SHGC2 Act. Azm. Cond. Stat. 1 Window Left (NE) 153 0.720 116-A 0.70 116-B 45 New 2 Window Front (NW) 60 0.720 116-A 0.70 116-B 315 New 3 Window Front (NW) 120 0.720 116-A-0.70 116-B 315 _ New 4 Window Left NE 110 0.720 116-A 0.70 116-B 45 _ New - 5 Window Front NW 120 0.720 116-A 0.70 116-B 315 New 6 Window Front (NW) 120 0.720 116-A 0.70 116-B 315 New 7 Window Right (W) 40 0.7201116 -Al 0.70 116 -BI 270 New 8 Window Front NVJ 230 0.7201116-A 0.70 116-B 315 New 9 Window Right SW 243 0.720 116-A 0.70 116-B 225 New 10 Window Front (NW) 40 0.720 116-A 0.70 116-B 315 New 11 Window Front (N) 243 0.720 116-A 0.70 116-B 0 New 12 Window Right (W 120 0.720 116-A 0.70 116-B 270 New 13 Window Right (W) (_ 120 0.720 116 A 0.70 116-B _ 270 New 1 Glazing Ty_pi Double Clear DE Do_uble Clear Df Double Clear DE }Double Clear Df Double Clear DE Double Clear DE Do_uble Clear DE Double Clear DE _Do_uble Clear DE Double Clear DE Double Clear DE Double Clear DE Double Clear DE (1)U -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value M1`_ _ 'Suite 5 M) ___ ;Suite 5 EXTERIOR Location/ I Comments M) -, Suite 1 M) Suite 1 M)-_•• - - --- - - -� Suite 1-_-_ Wd. 15.3 - __ Suite 2 MM) Suite 3 --- - -__ -_-- M) Suite 4 M) Suite 4 M Suite 4 M) Suite 5 M) __ _- Suite 5 M1`_ _ 'Suite 5 M) ___ ;Suite 5 EXTERIOR SHADING # Exterior Shade Type SHGC 0.76 Window Hgt. 10.0 Wd. 15.3 Len. 23.0 Overhang-_ Hgt. LExt.RExt_ 0.1 23.0 - Left Fin Dist. Len. Hat. 2_3.0 Right Fin_ _ I 1 None 2 1 None 0.76 6.0 10.0 11.0 0.1 11.0 ; - - - - 3 None ----0.76 10.0 12.0 11.0 0.1 11.0 - 10.0 12.0 4.0 0.1 10.0 12.0 3.5 0.1 3.5 10.0 4.0 3.5 0.1 3.5 _11.0 11.0- 3.5 3.5 4 None _ 5 None - -0.76 0.76 6 None 0.76 7 None 0.76 8 None 0.76 10.0 22.8 3.5 0.1 3.5 3.5_ - 9 None 0.76 10.0 24.3 3.5 0.1 3.5 3_5-- - '-_ - -- - - 10 None 0.76 10.0 4.0 3.5 0.1 3.5 3.5 11 None 0.76 10.0 24.3 3.5 0.1 3.5 3.5.-_�- 12 INone 0.76 1 10.0 12.0 3.5 0.1 3.5 1 10.0 12.0 3.5 0.1 3.5 3.5 13 1 None 1 0.76 IMINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES E�I�II The proposed building Is In climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general l�I lighting of at least 0.5 Wift2. See Section 143(c). If this box Is checked, ENV4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.3 by EnergySoft User Number: 3358 Job Number: 05-127 Page.'6 of 22 CERTIFICATE OF COMPLIANCE ENVA -C PROJECT NAME--- — -- — --- -DATE—_l Washington Park Shops 3 _ 3/7/20_0_7 _ OPAQUE SURFACES Surface Insulation # Type Area U -Fac. Cay. Cont. Act. Cond' Joint Appendix Azm. Tilt Status IV Reference —� Location / Comments_ 21 Wall 374 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 5 — I -- - ---- --- - — — - -- --- ---- -- - — tMINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES --1 —I I I - N, E. A. K (New, txisting, Altered, Removed) - -- FENESTRATION SURFACES ❑More than or equal to 10,000 sq.ft. of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default U -factors from Standards Table 116-A and B. Certificate shall be filed in the contractor's proiect office durino construction and in the buildinn mananer's off,,. actor—On fi „ # Type Area U -Fac. SHG[2 Am. on. Stat [lazing Type — Comments_ — —. Dist. Len. Hgt__ I -- - ---- --- - — — - -- --- ---- -- - — tMINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES —I 1 u-ractor I ype: 1 lb -A uetault Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type Window Overhang—_— SHGC Hgt. Wd. , Len. Hgt. LExt.RExt__ Left Fin__ Dist. Len. Hgt. Right Fin Dist. Len. Hgt__ I -- - ---- --- - — — - -- --- ---- -- - — tMINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES ❑ The proposed building Is In climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a telling height greater than 15 feet, and an LPD for general lighting of at least 0.5 WI142. See Section 143(c). If this box is checked, ENV4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.3 by EnergySoft User Number: 3358 Job Number: 05-127 Page:7 of 22 CERTIFICATE OF COMPLIANCE MECH-1-C PROJECT NAME DATE Washington Park Shops 3 3/7/2007 J .Designer: --- ------- This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: SYSTEM ACCEPTANCE. Before an occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, MECH-I-A Form shall be submitted to the building department that certifies plans, specifications, installation certificates.e nd ooeratina and maintenanre infnrmntinn meet rhe ren niremente of Corfinn 1n_1n1IM -A TBle oe 0—i c STAT MENT OF COMPLIANCE [NPOMECH-2-A: Ventilation System Acceptance Document -Variable Air Volume Systems Outdoor Air Acceptance Air Volume Systems �ig (% -Constant Outdoor Air Acceptance PTV, Equipment requiring acceptance testing l" �rj� Test mguirdd on all New systems both New Construction and Retrofit.- [MECH-3-A: Packaged HVAC Systems Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. ❑ MECH-4-A: Air -Side Economizer Acceptance Document - Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. Units with economizers that are installed at the factory and certified with the commission do not require equipment testing but do require construction inspection. [`MECH-5-A: Air Distribution Acceptance Document I� (` Equipment requiring acceptance testing _ - This test required If the unit serves 5, 000 fi2 of space or less and 25% or more or the ducts are in nonconditioned or semiconditioned space like an attic. New systems that meet the above requirements. Retrofit systems that meet the above requirements and either extend ducts. replace ducts or replace the packaged unit. ❑ MECH-6-A: Demand Control Ventilation Acceptance Document u Equipment requiring acceptance testing All new DCV controls installed on new or existing packaged systems must be tested. ❑ MECH-7-A: Supply Fan Variable Flow Control Acceptance Document Equipment requiring acceptance testingAll new VA Ian volume controls installed on new or existing systems must be tested ❑ MECH-8-A:-Hydronic System Control Acceptance Document _- I -Variable Flow Controls Applies to chilled and hot water systems. -Automatic Isolation Controls Applies to new boilers and chillers and the primary pumps are connected to a common header. -Supply Water Temperature Reset Controls Applies to new constant flow chilled and hot water systems -that have a design capacity greater than or equal to 500,000 StWhr. -Water-loop Heat Pump Controls Applies to all new watertoop heat pump systems where the combined loop pumps are greater than 5 hp. -Variable Frequency Controls Applies to all new distribution pumps on new variable flow chilled, hydronic heat pump or condenser water systems where the pumps motors are greater than 5 hp. Equipment requiring acceptance_ testing `— - — - ^ _ EnergyPro 4.3 by EnergySoft User Number: 3358 Job Number: 05-127 _- Page:8 of 22 FAIR SYSTEM REQUIREMENTS Part 1 of 2 • MECH-2-C PROJECT NAME- -- DATE - Washington Park Shops 3 ' ' _3/7/2007 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems AIR_SYSTEMS, Central or Single Zone RTU -1 i RTU -2 - RTU -3 7.80 HSPF i 7.80 HSPF_ T-24 MANDATORY MEASURES ' Section Reference on Plans or Specification 1 Heating Equipment Efficiency f Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation ` VAV Minimum Position Control Demand Control Ventilation r Time Control t Setback and Setup Control ' Outdoor Damper Control Isolation Zones' Pipe Insulation Duct Insulation 112(a) 7.80 HSPF 7.70 HSPF . ` 7.80 HSPF_ 112(a) 13.0 SEER % 11.9 EER j '11.3"1 SEER / 11.9 EER _ 13.Q SEER / 11.9 EER 112(b) Yes Yes Yes 112(c), 115(a) n/a n/a - -n/a -- — - - - 144 () Constant Volume ' ' _- Constant Volume _ Constant Volume 144 (c) _�_ - _ L- 121(b) _' 477 cfm y 309 cfm - _ 1419 cfm' J 144 U No. } No ------- No 144 U No Economizer`' - _ _I ' No Economizer • 121(c) No No No 121 c122 a Programmable Switch ; Programmable Switch Programmable Switch 122(e) Heating & Cooling Required -I , Heating & Cooling Required Heating & Cooling Required 122(� Auto " , Auto - — Auto___ 122(g) n/a I ` n/a _ n/a -- 123-- 124 R-4.2 R-4.2 R-4.2 PRESCRIPTIVE MEASURES ~ ' Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calcuiated Sensible Cooling Capacity z 1.212 Proposed Sensible Cooling Capacity 2 Fan Control y DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance „ 144 (a & b)._ T - - n/a % - n/a- n/a 144 a & b " . 28,730 btuh ' ` 21,735 btuh J�-- 28,730 btuh 144 (a& b) n/a n/a 144 a( & b) 40,082 btuh,,. _ _ I 30,977 btuh _ -n/a -- - 3_8,510_bluh_ 144 () Constant Volume ' ' _- Constant Volume _ Constant Volume 144 (c) _�_ - _ L- 144 U Yes -I T Yes=_ -- -- -- _ Yes J 144 U No. } No ------- No 144 U No Economizer`' - _ _I ' No Economizer • No Economizer 144 Constant Temp Constant Temp Constant Temp 144 (f) Constant Temp _-� - Constant Temp Constant Temp , 144 (k) '. No -� , _ f No -_�_ -_ No 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the — required features are documented. If a requirement is not applicable, put "N/A" in the column. ` 2: Not required for hydronic heating and cooling.. Either•enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Sirigle Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. - z NOTES TO FIELD - For Building Department Use Only R. �x`d �: X' i"3 , 4 ' a, ,�.,,t v3x tis a y ' �4•i r' �,� i �,, :"Al Run Initiation Time: 03/06/07 10:45:56 Run Code: 1173206756 ' EnergyPro 4.3 by EnergySoft User Number 3358 Job Number: 05-127, -- Page:9 of 22 -- AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C (PROJECT NAME DATE — --� Washington Park Shops 3 _ 3/7/2007 SYSTEM FEATURES ITEM OR SYSTEM TAG(S) Number of Systems AIR SYSTEMS, Central or Single Zone = RTU -4 — RTU -5 _ _— RTU -6 & RTU -7 i _ . -- --- — T-24 i MANDATORY MEASURES Section Reference on Plans or Specification 1 Heating Equipment Efficiency Y Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control - Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation Duct Insulation = 112(a) 7.70 HSPF I 3.40 COP 7.80 HSPF -13.0 SEER / 11.9 EER 2(a)_____t__ 13.0 SEER / 10.3 EER �__—_ 10.5 EER Yes 112(b) a Yes 112(c), 115(a) n/a _ I n/a _ _Yes _ n/a 51,494 btuh :'_1--- 65,730 btuh _ 78,165 btuh 144 U 121(b) ' r—_ '443 cfm `" 646 cfm_ cfm 121(c) No No __870 No 121(c) No No No 121(c), 122(e) _ Programmable Switch 1 _ I__ Programmable Switch _ Programmable Switch 122(e) Heating & Cooling Required_ Heating & Cooling Requiredl —� Heating &_Cooling Required 1220 -Auto Auto Auto 122(9) n/a n/a — n/a 123-- 124 * R-4.2 - R-4.2 R-4.2 T y PRESCRIPTIVE MEASURES , Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity z Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 144 (L& b)_ n/a _I_ - n/a - — —_n/a - ---- - 144 a & b 34,352 btuh I 43,096 btuh 57,461 btuh_ 144 a& b n/a I _ n/a _ 'n/a 144 (a & b) 51,494 btuh :'_1--- 65,730 btuh _ 78,165 btuh 144 U Constant volume _ Volume _ _Constant volume 144 (c)- _ 144 U Yes Yes Yes 144 U No ' No _ No 144 U No Economizer No Economizer No Economizer 144 (f) Constant Temp_ __ I_ •-- Constant Temp Constant Temp _ I -Constant Tem Constant Temp 144(f) Constant Temp I 144 (k)No I • -_ No �— No --- 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. INOTES TO FIELD - For Ruildinn fU art a Use r)nIv Run Initiation Time- 03/06/07 111•a5.56 plan r.,.ao• 44747nc7ec. EnergyPro 4.3 • by EnergySoft User Number 3358 Job Number: 05-127 _— _ — Page: 10 of 22,J NATER SIDE SYSTEM REQUIREMENTS - Part 2 of 2 MECH-2-C PROJECT NAME DATE. Washington Park Shops 3 3/7/2007 SYSTEM FEATURES 2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, H dronic Loops ITEM OR SYSTEM TAG(S) Number of Systems - T-24 MANDATORY MEASURES Section Reference on Plans or Specification?, Equipment Efficiency 112(a) Pipe Insulation 123 PRESCRIPTIVE MEASURES Calculated Capacity 144 (a & b) Proposed Capacity 144 (a & b) . Tower Fan Controls 144 h Tower Flow Controls 144 h Variable Flow System Design 144 0) Chiller and Boiler Isolation 144 ' CHW and HHW Reset Controls 144 0) WLHP Isolation Valves VSD on CHW, CW & WLHP Pumps > 5 HP s E�' DP Sensor Location " 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. �. Service Hot Water, Pool Heating ITEM OR SYSTEM TAGS) DHW Heater Number of Systems 'g MANDATORY MEASURES Reference on Plans or Specification' Water Heater Certification 113 (a) Water Heater Efficiency 1.13 (b " Service Water Heating Installation 113 (c) Pool and Spa Efficiency and Control 114 a Pool and Spa Installation N " 115 (c) Spa Heater - No Pilot Light 115 d r 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. �. Service Hot Water, Pool Heating ITEM OR SYSTEM TAGS) DHW Heater Number of Systems 'g MANDATORY MEASURES Reference on Plans or Specification' Water Heater Certification 113 (a) Water Heater Efficiency 1.13 (b " Service Water Heating Installation 113 (c) Pool and Spa Efficiency and Control 114 a Pool and Spa Installation 114 b Pool Heater - No Pilot Light 115 (c) Spa Heater - No Pilot Light 115 d r 1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" ins the column. iIOTES TO FIELD - For Butldlna eDartmenf Use Only K.� . ? 3 S� t b Y i w,: w # i z C 4+j $a }t} ql • g'. � F:. S: f;7s. ylii'4. .�f%. .a 65✓r� S .c 1,� `� .,5,'9" 'y.r 1'�.a�-* 4 :T.' .. +i r. "3�'� f :r�'''�,.r..�"4.��i.. if�1 S f.'fr" d Run Initiation Time: 03/06/07 10:45:56 Run Code: 1173206756 EnergyPro 4.3. by EnergySoft User Number: 3358 Job Number: 05-127 Page: 11 of 22 MECHANICAL VENTILATION MECH-3-C PROJECT NAME Washin n Park Shops 3 DATE 3/7/2007 user Nunuer: job Number: 05-121 -_-.- Page: 12 of 22-- _j PRESCRIPTIVE REHEAT LIMITATION (Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) A AREA B BASIS C D OCCUPANCY E F BASIS _1 .__ G r H I I _ VAV MINIMUM- _ J K L M N O fA c C' z C U Cr 1< I t ..., m v NW 7 -- f7 --- C ---� N N• -- N D0 Nva tv o n 0 W W� xD li m g o. Q m n DoT R(o m0-' n� x C1 n v 3 odA x Q c��m T .+ y n o -71 cn 3x X g w3 v :Rm o ai d 0 T 3 � n tD T �" 3 'TI9 �1 ! O DID � A � O y 0 000. O i ZONE/SYSTEM o °o y 3 0 3 -- 0,y ' 10 y. x a T : "" �. ? D .. I m � - Suite 1 1,400 -' 0.22 308 31.8 15.0 477 — I 477 I -477 477-- -- 4771 -- i --- -I.- (— -- ' - --� RTU -1 Total Suite 1 908 0.22 200 20.6 15.0 309 ( 309 -- RTU -2 Total L 309 3091-- --- Suite 2 1,228 0.22 270 27.9 15.0 .419' 419 419 --- -- - _� - RTU -3 Total_ _419 419 443! l Suite 3 I 1,300 0.22 286 29.5 15.0 4431 RTU 4 — Total —443 I I 443 - 443 ---- -- -- -- ---- --� I i Suite 4 1,895 0.22 417 43.1 15.0 6461 646 646 — --- _ - -- RTU -5 Total I 646 646 Suite 5 2,553 0.22 562 58.0 15.0 870-jr 8708701- - _- - -- — - - - -� RTU -6 & RTU -7 _— Total � 870 , 870 : , _ - l -- - - - t I -I-- - -4 I C Minimum ventilation rate per Section 121, Table 121-A — -----' --- — --"— E Based on fixed seat or the greater of the expected number of occupants and 50% of the CBC occupant load for evess-purposes for spaces without fixed seating_ H Required Ventilation Air (REO'D V.A.) is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS (column D or G). -- I Must be greater than or equal to H, or use Transfer Air (column N) to make up the difference. - - --- J Design fan supply cfm (Fan CFM) x 30%; or —---"------- '"'---- K Condition area (ft. sq.) x 04 cfnVh. sq.; or -'-------"—`— —' '`-"--'—"'---- L Maximum of Columns H. J. K, or 300 cfm --- -- -- M IThis must be less than or equal to Column L and greater that or equal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. P-1-0— A Q Mr C-- 0 -A .. �.. user Nunuer: job Number: 05-121 -_-.- Page: 12 of 22-- _j MECHANICAL EQUIPMENT DETAILS Fan Type_ Constant Volume Part 1 of 2 MECH-S-C PROJECT NAME Washington Park Shops 3 — _ _ _� DATE j 3/7/2007 _J CHILLER AND TOWER SUMMARY System Type Distribution Type Qty Rated Vol. Input j (Gals.) Efficiency Tons _ Tot. ! Qty 1GPM _PUMPS Motor BHP Eff. Drive Eff. Pump I Control Equipment Name Equipment Type Qty. i 1v! !&• i yyILLa JV W121/1a I I MUL i i-rAtvnLT ULN I KAL WA I ER HEATING DETAILS Hot Water Pump _Hot Water Piping Length (ft) _ Add 1/2r' Control # HP Type In Plenum _ Outside _ Buried_ Insulation 1i CENTRAL SYSTEM RATINGS HEATING COOLING Aux. Condition Efficiency System Name System Type Qty Output_ kW Eff. Output_I —, __— tatus _L Economizer Type CARRIER 50HJ0005 —S 1 Packaged DX 4 46,000 0.0 7.80 HSPF 47,400 13.0 SEER / 11.9 EER New No Economizer CARRIER 50HJQ004 —---"--------'------' i � CARRIER 50HJ0006 Packaged DX 1 34,800 0.0 7.70 HSPF 36,700- 13.1 SEER / 11.9 EER New jNo Economizer I --- — - Packaged DX 1 55,000 0.0 7.70 HSPF 63,800 F13.0 SEER / 10.3 EER— New No Economizer 1 CARRIER 50HJQ007 — New No - -- — - --' Packaged DX 1 69,000 0.0 3.40 COP 76,000 10.5 EER New No Economizer —j - ------ III_ ----- _ __— ..-I— -- - ---�-- I System Name CARRIER 50HJQ005 Fan Type_ Constant Volume Motor Location Draw -Through aurrLi CFM 1,600 CARRIER 50HJQ004 Condition Status Energy Factor or RE Standby Loss or Pilot_ TANK IN!WL� Ext. R -Val. System Name System Type Distribution Type Qty Rated Vol. Input j (Gals.) CHRONOMITE S-30 LP Instant Elec No Pipe Insulation 8 9,4291 0 New 0.98 n/a n/al MUL i i-rAtvnLT ULN I KAL WA I ER HEATING DETAILS Hot Water Pump _Hot Water Piping Length (ft) _ Add 1/2r' Control # HP Type In Plenum _ Outside _ Buried_ Insulation 1i CENTRAL SYSTEM RATINGS HEATING COOLING Aux. Condition Efficiency System Name System Type Qty Output_ kW Eff. Output_I —, __— tatus _L Economizer Type CARRIER 50HJ0005 —S 1 Packaged DX 4 46,000 0.0 7.80 HSPF 47,400 13.0 SEER / 11.9 EER New No Economizer CARRIER 50HJQ004 —---"--------'------' i � CARRIER 50HJ0006 Packaged DX 1 34,800 0.0 7.70 HSPF 36,700- 13.1 SEER / 11.9 EER New jNo Economizer I --- — - Packaged DX 1 55,000 0.0 7.70 HSPF 63,800 F13.0 SEER / 10.3 EER— New No Economizer 1 CARRIER 50HJQ007 — New No - -- — - --' Packaged DX 1 69,000 0.0 3.40 COP 76,000 10.5 EER New No Economizer —j - ------ III_ ----- _ __— ..-I— -- - ---�-- I System Name CARRIER 50HJQ005 Fan Type_ Constant Volume Motor Location Draw -Through aurrLi CFM 1,600 CARRIER 50HJQ004 Constant Volume _ Constant Volume Draw -Through - 1,200 CARRIER 50HJQ006 `-- Draw -Through 2,000, CARRIER 50HJ0007 Constant Volume --" Draw -Through 2,400 4.3 by )n Ilme: 03A User Number: 3358 -FAN _— _ _RETU-R_N_-FANS Motor Drive ; Motor I Drive I. BHP Eff. Eff. CFM 0.40 66.0% 97.0% none 0.301 64.0%°1 97.0% - none -0.40 66.0%1 97.0%1 none 0.50 76.0%I 97.0% none Run Coc Job Number: 057127 —_— _ - Page: 13of22--- ENVELOPE MANDATORY MEASURES ENV -MM name Washi Park .Shops 3 TE 3/7/2007 __ J DESCRIPTION _ _ —[Designer Enforcement-dI • 0 §118(,) Installed Insulating Material shall have been"certified by the manufacturer to comply with the California Quality, Standards for insulating material, Title 20, Chapter 4, Article L — 3. i I �( § 118(c) All Insulating Materials shall be installed in compliance with the flame spread rating I and smoke density requirements of Sections 2602 and 707 of Title 24, Part 2. R § 117(a) All Exterior Joints and openings in the building that are observable sources of air leakage shall be caulked, gasketed, weatherstripped or otherwise sealed. ` I� 1 — RX § 116(b) Site Constructed Doors, Windows and Skylights shall be caulked between the unit and the building, and shall be weatherstripped (except for unframed glass doors and fire doors). ------- - ---- ❑ § 116(a)1 Manufactured Doors and Windows installed shall have air infiltration rates not exceeding those shown in Table.Number 1-E. of the Standards. Manufactured fenestration products must be labeled for U -value according to NFRC procedures. --- — —� ❑ §i18(e) Demising Walls in Nonresidential Buildings: I1I 7 The opaque portions of framed demising walls in nonresidential buildings shall have insulation with an installed R -value of no less than R-13 between framing.members. � [ i I i i EnergyPro By Energysoft _ User Number: User Job Number: 05-127 _ — Page: 14 of 22`� MECHANICAL MANDATORY MEASURES Part 1 of 2 MECH-MM PROJECT NAME --- -�-- ------ � DATE -------- - Washington Park Shops 3 _ _ _� 3/7/2007 _ DESCRIPTION _pesi ner Enforcement Equipment and Systems Efficiencies 0 §111 Any appliance for which there is a California standard established in the Appliance Efficiency Regulations will comply with the applicable standard. ❑ § 115(a) Fan type central furnaces shall not have a pilot light. F] § 123 Piping, except that conveying fluids at temperatures between 60 and 105 degrees Fahrenheit, or within HVAC equipment, shall be insulated in accordance with i Standards Section 123. _ X❑ § 124 Air handling duct systems shall be installed and insulated in compliance with i Sections 601, 602, 603, 604, and 605 of the 2001 CMC Standards. Controls j ---- — --- § 122(e) Each space conditioning system shall be installed with one of the following: X❑ § 122(e)1A Each space conditioning system serving building types such as offices and manufacturing facilities (and all others not explicitly exempt from the requirements of Section 112 (d)) shall be installed with an automatic time switch with an accessible manual override that allows operation of the system during off -hours for i up to 4 hours. The time switch shall be capable of programming different schedules for weekdays and weekends and have program backup capabilities that prevent the loss of the device's program and time setting for at least 10 hours if power is interrupted; or § 122(e)1 B An occupancy sensor to control the operating period of the system; or § 122(e)1 C A 4 -hour timer that can be manually operated to control the operating period of the -- - - -- -- -- system. X❑ § 122(e)2 Each space conditioning system shall be installed with controls that temporarily i restart and temporarily operate the system as required to maintain a setback heating and/or a setup cooling thermostat setpoint. L ❑ § 122(g) Each space conditioning system serving multiple zones with a combined conditioned floor area more than 25,000 square feet shall be provided with isolation zones. Each zone: shall not exceed 25,000 square feet; shall be provided with isolation devices, such as valves or dampers, that allow the supply of heating or i cooling to be setback or shut off independently of other isolation areas; and shall —• - -- -- --- - - - - --- --- be controlled by a time control device as described above. § 122(a&b) Each space conditioning system shall be controlled by an individual thermostat that responds to temperature within the zone. Where used to control heating, the control shall be adjustable down to 55 degrees F or lower. For cooling, the control -- — -"- shall be adjustable up to 85 degrees F or higher. Where used for both heating and cooling, the control shall be capable of providing a deadband of at least 5 degrees F within which the supply of heating and cooling is shut off or reduced to a — - minimum. 0 § 122(c) Thermostats shall have numeric setpoints in degrees Fahrenheit (F) and adjustable r setpoint stops accessible only to authorized personnel. I § 112(b) Heat pumps shall be installed with controls to prevent electric resistance � supplementary heater operation when the heating load can be met by the heat pump alone. EnergyPro By EnergySoft User Number: User Job Number: 05-127 -- - -Page: 15 of 22 - CERTIFICATE OF COMPLIANCE (Part 1 of 4) LTG -1-C PROJECT NAME DATE SHOPS 3 3/7/2007 PROJECT ADDRESS - - -- 46-600 WASHINGTON STREET LA QUINTA PRINCIPAL DESIGNER - LIGHTING TELEPHONE Building Permit # KKE ARCHITECT (626) 796-8230 DOCUMENTATION AUTHOR TELEPHONE Checked by/Date TEK Engineering Group, Inc. 818 592-6643 11 Enforcement Agency use GENERAL INFORMATION UX IL DATE OF PLANS BUILDING CONDITIONED FLOOR -AR EA CLIMATE ZONE 08-01-06- . 9,283 sra.Ft. 15 BUILDING TYPE ❑X NONRESIDENTIAL ❑ HIGH RISE RESIDENTIAL ❑ HOTEL/MOTEL GUEST ROOM ❑X CONDITIONED SPACESX❑ UNCONDITIONED SPACES ❑ INDOOR & OUTDOOR SIGNS PHASE OF CONSTRUCTION NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION METHOD OF LIGHTING ❑ COMPLETE BUILDING ❑X AREA CATEGORY ❑ TAILORED ❑ PERFORMANCE COMPLIANCE ❑ COMMON LIGHTING STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements. The documentation preparer hereby certifies that the documentation is accurate and complete. DOCUMENTATION AUTHOR SIGNATURE L / DATE MASOUD NARIMAN (V 3 -`l -o`7 The Principal Lighting Designer hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the lighting requirements contained in Sections 110, 119, 130 - 132, 146, 148 & 149 of Title 24, Part 6. ❑ The plans & specifications meet the requirements of Part 6 (Sections 10-103a). ❑ The installation certificates meet the requirements of Part 6 (10-103a 3). ❑ The operation & maintenance information meet the requirements of Part 6 (10-103c). Please Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect. ❑ I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538 and 6737.1. PRINCIPAL LIGHTING DESIGNER -NAME SIGNATURE. // DATE LIC. # KKE ARCHITECT '' N�-0? (S29 LIGHTING MANDATORY MEASURES Indicate location on plans of Note Block for Mandatory Measures LIGHTING COMPLIANCE FORMS & WORKSHEETS Check box if worksheet is included ®LTG -1-C, Parts 1 of 4 and 2 of 4: Certificate of Compliance. Part 1 of 4 and 2 of 4 are required for all submittals ❑LTG -1-C, Part 3 of 4: Certificate of Compliance. Part 3 of 4 submittal is required only if Control Credits are claimed ® LTG- 1-C, Part 4 of 4: Certificate of Compliance. Part 4 of 4 submittal is required when lighting controls are installed (9 LTG -2-C: Indoor Lighting Schedule 13.0 LTG -3-C: Portable Lighting Worksheet IR LTG -4-C: Lighting Controls Credit Worksheet I/- /O®LTG-5-C: QROF 19 LTG-5-C:Indoor Lighting Power Allowance NARIMq�"`<(�'L ❑LTG -6-C: Tailored Method Worksheet CoQ ❑LTG -7-C: Room Cavity Ratio Worksheet co .09 = m ❑LTG -8-C: Common Lighting Systems Method Worksheet N0. 15286 El LTG -9-C: Line Voltage Track Lighting Worksheet Exp• 03/31/ EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 * ��Cn�. v('Q� * Page:1 of 12 oTq� OF�AU��\P 4 CERTIFICATE OF COMPLIANCE (Part 2 of 4) LTG -1 -C] PROJECT NAME DATE .. SHOPS 3 - 3/7/2007 INSTALLED INDOOR LIGHTING POWER FOR CONDITIONED AND UNCONDITIONED SPACES INSTALLED - WATTS INSTALLED LIGHTING; CONDITIONED SPACES (From LTG -2-C) 10,600 ' °_,PORTABLE LIGHTING (From LTG -3-C) 0 LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 0 CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 10,600 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 1 214 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 0 y; UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 214 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES Q COMPLETE BUILDING METHOD (From LTG -5-C) ALLOWED ❑X AREA CATEGORY METHOD (From LTG -5-C)"• _ . WATTS 0 TAILORED METHOD (From LTG -5-C) '+ ALLOWED LIGHTING POWER 11 789 ALTERNATE COMPLIANCE Q PERFORMANCE METHOD COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 229 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL CONTROL -- IDENTIFICATION w . . CONTROLTYPE (Auto Time Switch, Dimming, -etc.) k - Check if SPACE CONTROLLED Daylighting NOTES TO FIELD - For Building Department Use Only EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:2 of 12 CERTIFICATE OF COMPLIANCE (Part 4 of 4) LTG-1-C PROJECT NAME SHOPS 3 DATE 3/7/2007 Designer: This form is to be used by the designer and attached to,the plans. Listed below are all the acceptance tests for lighting systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Before an occupancy permit is granted for a newly constructed building or space, or a new lighting system system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, LTG-1-A, Forms shall be submitted to the building department that: A. Certifies plans, specifications, installation certificates, and operating-and maintenance information meet the requirements of§ 10-103(b) and Title 24 Part 6. Test D cri tion Test Performed By: LTG-2-A: Lighting Control Acceptance Document - Occupancy Sensor Acceptance - Manual Daylight Controls Acceptance - Automatic Time Switch Control Acceptance 1 I Equipment requiring acceptance testing • LTG-3-A: Automatic Daylighting Controls Acceptance Document Equipment requiring acceptance testing I EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:3 of 12 1 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C PROJECT NAME DATE SHOPS 3 I 3/7/2007 INSTALLED LIGHTING POWER FOR CONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J Name Type Description �nri 3 cdc 3.33oriv� gym fD `� °' B`qx cn cmi' 3.w3 ��m m `� `� c 30y �� m 0 dm cn r Z x'03 m "v CD H 0) E; x�— _ A,A1 (4) 4 ft Fluorescent T8 Rapid Start Elec F32T8 4 32 1.0 114.0 X 92 10,488 B P) 13w Compact Fluorescent Quad 4 Pin lec 1 13 1.0 14.0 X 8 112 PAGE TOTAL 10 600 BUILDING TOTAL (sum of all pages) 10,600 PORTABLE LIGHTING (From LTG -3-C) D CONTROL CREDIT (From LTG -4-C) D ADJUSTED ACTUAL WATTS 10 600 EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:4 of 12 1 INDOOR LIGHTING SCHEDULE (Part 2 of 2) LTG -2-C (PROJECT NAME DATE SHOPS 3 3/7/2007 INSTALLED LIGHTING POWER FOR UNCONDITIONED SPACES Luminaire Lamps/Ballasts Installed Watts C D E F G H I J Name Type Description �3 �� --Zcmc �yCrmy �� m `� 3mni ��y 3, - 3 ��v �� " `, 0 r- c 3v 0 �m N m v fD n �� •J Yes T No r z 3• C X03 N (A 5 x�ni vyC. C,C1 (2) 4 ft Fluorescent T8 Rapid Start Elec F32T8 2 32 1.01 62.0 X 3 186 1 26w Compact Fluorescent Triple 4 Pin P) 1 26 1.01 28.0 X 1 28 PAGE TOTAL 214 BUILDING TOTAL (sum of all pages) 214 CONTROL CREDIT (From LTG -4-C) D ADJUSTED ACTUAL WATTS 214 EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number. 06-248 Page:5 of 12 1 PORTABLE LIGHTING WORKSHEET LTG -3-C] PROJECT NAME SHOPS 3 DATE I 3/7/2007 FEET A TABLE 1 - PORTABLE LIGHTING NOT SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET A B C D ROOM # OR ZONE ID DEFAULT AREA (W/sqJ SF TOTAL WATTS B X C # OF FIXT. LUMIN. WATTS PER FIXTURE TASK # OF AREA TASK (SF) AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) SUITE 1&3 3,458 1 3,458 SUITE 5 1 2,453 1 2,453 BATH 400 1 TOTAL 0 0 TABLE 2 - PORTABLE LIGHTING SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET A B 0 C D E F G ROOM # OR ZONE ID PORTABLE LIGHTING Descri tion # OF FIXT. LUMIN. WATTS PER FIXTURE TASK # OF AREA TASK (SF) AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) SUITE 1&3 3,458 1 3,458 SUITE 5 1 2,453 1 2,453 BATH 400 1 400 SUITE 2&4 2,972 1 2,972 TOTALI 9.283 0 TABLE 3 - PLANS SHOW PORTABLE LIGHTING IS NOT REQUIRED FOR OFFICE AREAS > 250 SQUARE FEET ROOM # TOTAL AREA OR ZONE ID (SF) TOTALI 0 BUILDING SUMMARY - PORTABLE LIGHTING Designer needs to provide detailed documentation that the lighting level provided by the overhead lighting meets the needs of the space. The details include luminaire types and mounting locations relative to work areas. BUILDING SUMMARY TOTAL AREA (SF) (FROM TABLES 1+2+3) TOTAL WATTS BUILDING TOTAL 9,283 0 EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:6 of 12 INDOOR LIGHTING POWER ALLOWANCE .. LTG -5 -Cl PROJECT NAME SHOPS 3 DATE 3/7/2007 ALLOWED LIGHTING POWER (Choose One Method) COMPLETE BUILDING METHOD - CONDITIONED SPACES ALLOWED WATTS WATTS PER SF COMPLETE BLDG. AREA ALLOWED WATTS BUILDING CATEGORY (From Section 146 Table 146-B) 229 AREA CATEGORY METHOD - CONDITIONED SPACES AREA (SF) ALLOWED WATTS AREA CATEGORY (From Section 146 Table 146-0) WATTS PER SF Retail Sales,.Wholesale 1.70 3,458. 5,879 2,698 Dininq 1.10 2,453 Corridor/Restroom/Support 0.60 400 240 Tenant Lease Space 1.00 2,972 2,972 TAILORED METHOD - UNCONDITIONED SPACES TOTAL UNCONDITIONED SPACES ALLOWED WATTS (From LTG -5-C and LTG -6-C) 0 PAGE TOTAL BUILDING TOTAL 9,283 9,283 AREA 11,789 11,789 WATTS TAILORED METHOD - CONDITIONED SPACES TOTAL ALLOWED WATTS (From LTG -"or from computer run.) D UNCONDITIONED SPACES Complete Building and Area Catagory Methods Category (From Section 146 Table 146 -B&C) WATTS PER SF AREA ' (SF) ALLOWED WATTS Electrical Mechanical Room 0.70 327 229 PAGE TOTAL BUILDING TOTAL 327 327 AREA 229 229 WATTS TAILORED METHOD - UNCONDITIONED SPACES TOTAL UNCONDITIONED SPACES ALLOWED WATTS (From LTG -5-C and LTG -6-C) 0 I EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:7 of 12 1 CERTIFICATE OF COMPLIANCE (Part 1 of 2) OLTG-1-C PROJECT NAME DATE SHOPS 3 3/7/2007 PROJECT ADDRESS 46-600 WASHINGTON STREET LA QUINTA PRINCIPAL DESIGNER - LIGHTING TELEPHONE Building Permit # KKE ARCHITECT (626) 796-8230 DOCUMENTATION AUTHOR TELEPHONE Checked by/Date TEK Engineering Group, Inc. (818) 592-6643 Enforcement Agency Use GENERAL INFORMATION DATE OF PLANS OUTDOOR LIGHTING ZONE 08-01-06 ❑ LZ1 LZ2 ❑ LZ3 ❑ LZ4 FUNCTION TYPE ❑X OUTDOOR LIGHTING ❑ OUTDOOR SIGNS ❑ INDOOR SIGNS PHASE OF CONSTRUCTION ® NEW CONSTRUCTION ❑ ADDITION ❑ ALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the outdoor lighting system specifications need to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements. The documentation preparer hereby certifies that the documentation is accurate and complete. DOCUMENTATION AUTHOR SIGNATURE DATE MASOUD NARIMAN The Principal Lighting Designer hereby certifies that the proposed outdoor lighting and signs design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the lighting requirements contained in Sections 110, 119, 130 through 132, and 146,and 149 of Title 24, Part 6. Please Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ❑ I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect. ❑ I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538 and 6737.1. PRINCIPAL LIGHTING DESIGNER - NAME SIGNATURE DATE KKE ARCHITECT LIGHTING COMPLIANCE FORMS & WORKSHEETS Check box if worksheet is included MOLTG-1-C: Certificate of Compliance. Required on plans for all submittals for outdoor lighting. Part 2 of 2 maybe incorporated in schedules on the Either LTG -1-C or OLTG-I-C may be used for signs as follows: 1. Use LTG -1-C if the project consists solely of indoor signs. 2. Use LTG -1-C if the project consists of indoor lighting, outdoor or indoor signs, but no other outdoor lighting. 3. Use OLTG-1-C if the project consists solely of outdoor signs. 4. Use OLTG-I-C if the project consists of outdoor lighting, outdoor or indoor signs, but no other indoor lighting. MOLTG-2-C: LIGHTING COMPLIANCE SUMMARY. Applicable parts required for ALL outdoor lighting allowances (Except Signs). MOLTG-3-C: AREA CALCULATIONS WORKSHEET. Applicable parts required for all outdoor area calculations. ❑OLTG-4-C: SIGN LIGHTING COMPLIANCE. Required for all internally and externally illuminated signs, for both indoor and outdoor signs. EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:8 of 12 plans CERTIFICATE OF COMPLIANCE (Part 2 of 2) OLTG-1-C PROJECT NAME DATE SHOPS 3 1 3/7/2007 Lighting Schedules on Plans Show that Outdoor Li-ghtin-q Meets Allowed Lightinq Power ❑ ❑X Lighting power allowance for general site illumination on OLTG-2-C Part 1 of 4 Not Applicable ❑ ❑X Lighting power allowance for local ordinances or for security multipliers on OLTG-2-C Part 2 of 4 Not Applicable ❑X ❑ Lighting power allowances for specific applications, other than vehicle service stations with canopies on OLTG-2-C Part 3 of 4 Not Applicable ❑ ❑X Lighting power allowances for vehicle service station canopies on OLTG-2-C part 4 of 4 Not Applicable ❑ ❑X Sign lighting compliance on OLTG-4-C Not Applicable Mandatory ❑X ❑ Measures o Show that Outdoor Liahtina Meets Outdoor Liahtina Controls Installed lighting power has been determined in accordance with Section 130(c)1 Not Applicable ❑X ❑ All permanently installed luminaires with lamps rated over 100 Watts either have a lamp efficacy of at least 60 lumins per Watt or are controlled by a motion sensor per Section 132(a) Not Applicable ❑X ❑ All Luminaires with lamps rated greater than 175 Watts In hardscape area, including parking lots, building entrances, canopies, and all outdoor sales areas meet the Cutoff Requirements of Section 132(b) Not Applicable ❑X ❑ All permanently installed outdoor lighting meets the control requirements of Section 132(c)1 Not Applicable ❑X ❑ Building facades, parking lots, garages, canopies, and outdoor sales areas meet the Multi -Level Lighting Requirements of Section 132(c) Not Applicable MANDATORY AUTOMATIC CONTROLS CONTROL LOCATION (Room #) NOTE TO FIELD CONTROL IDENTIFICATION CONTROL TYPE (Auto Time Switch, Dimming, etc.) AREA CONTROLLED EnergyPro 4.3 by Energysoft User Number: 6448 Job Number: 06-248 Page:9 of 12 _IGHTING COMPLIANCE SUMMARY (Part 3 of 4) OLTG-2-C Project Name Date SHOPS 3 3/7/2007 LIGHTING POWER ALLOWANCE FOR SPECIFIC APPLICATIONS Table 147-B - Other than Vehicle Station without Cano ies Allotted Watts Luminaire Lam s/Ballasts Design Watts A B C D E F G H I J K L M N O P Lighting Application 9 9 PPr Category (Table 147-13)i r D CD orioox .•o-,� S .0 T x D 0 Ta a oe D 1D x o c1 � �+ n o a a Description p yc� me ' °; 0 c �� Jm 0 3 rev r c3 3 y 0) �!; rm r 3i '0,0 m �°' 3�, °'.� ®0 �m 3 &�, d.a ®� m n v' m c rD 3� 3 Q Ho' r r'n L` x °' z 9 m a 'i oID -" a v $d ALL MOUNTED DECORAT 3,120 0.18 562 G 50w Low Voltage Halogen 50 Watt 1 50 1.0 54.0 X 8 432 56 H 50w Low Voltage Halogen LL M Watt 1 50 1.0 54.0 X 14 756 ALL MOUNTED FLR 3,760 0.18 677 E (3) 13w Compact Fluorescent Twin 4 Pin Ele Lamp 3 13 3.0 39.0 X 25 975 67 ALL PACKS 2,58 0.18 464 . D 250w Metal Halide Mag: X M250 1 250 1.01 295.0 X 3 885 464 _ T EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page: 10 of 12 .4 ILLUMINATED AREA CALCULATION WORKSHEET (Part 3 of 5) OLTG-3-C PROJECT NAME DATE SHOPS 3 3/7/2007 A. Outdoor Sales Lot Frontage and Sales Lot Area A B I C I D I E F G H Gross Illuminated Area (sq. ft.) If an Outdoor Sales Frontage Allotment was used, subtract that area from the Gross Illuminated Area Overlapping Areas Of Another Application Sales Lot Area (A - F - G) Mounting height of Sales Frontage Luminaires (feet) 3 x B Distance (In plan view) from the frontagge luminaire f0 frontSales edge of Sales Lot Lot Frontage Length (feet) Sales Frontage Area (C - D) x E (sq. ft.) ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. ❑ Section 147 (c)2 B - Measured in plan view, only illuminated sections of outdoor sales frontage areas that are immediately adjacent to the principle viewing location and unobstructed viewing length, and are within 3 mounting heights of the frontage have been used. Luminaires qualifying for this allowance are located in plan view between the principle viewing location and the frontage sales. B. Building Facade Area A B C D E F G H Designated Name and Orientation Length Height Gross Area (B x C) Areas (SF) to Subtract from within the Illuminated Area Net Area Available for Facade Ligghting (D - G) Area for which Illumination is Obstructed by Other Objects Areas covered and Area Not by signs Illuminated Sub total (E + F) WALL MOUNTED DECORAT 390 8 3 120 0 0 3,120 WALL MOUNTED FLR 470 8 3,760 0 0 3,760 WALL PACKS 215 12 2,580 0 0 2,580 Checklist ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. ❑ Section 147 (c)2 A - Only facades areas that are illuminated without obstruction or interference, by one or more luminaires, have been used. EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Paae:11 of 12 1 LIGHTING MANDATORY MEASURES LTG -MM PROJECT NAME DATE SHOPS 3 3/7/2007 DESCRIPTION r Designer Enforcement ❑X §131(d)1 For every floor, all interior lighting systems shall be equipped with a separate automatic control to shut off the lighting. This automatic control shall meet the requirements of Section 119 and maybe an occupancy sensor, automatic time switch, or other device y capable of automatically shutting off the' lighting. X] §131(d)20verride for Building Lighting Shut-off: The automatic building shut-off system is provided with a manual, accessible override switch in sight of the lights. The area of override is not to exceed 5,000 square feet. 0 §119(h) Automatic Control Devices Certified: All automatic control devices specified are certified, all alternate equipment shall be certified and installed as directed by the manufacturer. .' X❑ §111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the project are certified and listed in the Directory. All installed fixtures shall be certified. < 3 X❑ §132 Tandem Wiring for One and Three Lamp Fluorescent fixtures: All one and three' lamp fluorescent fixtures are tandem wired with two lamp ballasts where required by Standards Section 132; or all one and three lamp fluorescent fixtures are - specified with electronic high -frequency ballasts and are exempt from tandem , wiring requirements. X❑ §131(a) Individual Room/Area Controls: •Each room and area in this building is equipped with a separate switch or occupancy sensor device for each area with floor -to - ceiling walls. §131(b) Uniform Reduction for Individual Rooms: All rooms and areas greater than 100 square feet and more than 0.8 watts per square foot of lighting load shall be controlled with bi-level switching for uniform reduction of lighting within the room. §131(c) Daylight Area Control: All rooms with windows and skylights that are greater than 250 square feet and that allow for the effective use of daylight in the area shall have 50% of the lamps in each daylit area controlled by a separate switch; or the effective use of daylight"cannot be accomplished because the windows are - continuously shaded by a building on the adjacent lot. Diagram of shading during different times of the year is included on plans. El §131(e) Display Lighting. Display lighting shall be separately switched on circuits that are 20 amps or less. EnergyPro 4.3 by EnergySoft User Number: 6448 Job Number: 06-248 Page:12 of 12