The URL can be used to link to this page

BRES2015-018978-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 4 sefv Qa!A& COMMUNITY DEVELOPMENT DEPARTMENT BUILDING PERMIT Application Number: BRES2015-0189 Property Address: 53749 VIA PISA APN: 777190011 Application Description: FRANA RESIDENCE / PATIO ENCLOSURE TO LIVING SPACE 230 SF Property Zoning: Application Valuation: $50,000.00 Applicant: G L SCRIVENS CONSTRUCTION INC P 0 BOX 13302 PALM DESERT, CA 92255 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class: B License No.: 807645 A Date: O /.O to 7 Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: ( ) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). ( ) I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_J I am exempt under Sec. . B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of•the work for which this permit is issued (Sec. 3097,.Civ. C.). Lender's Name: Lender's Owner: JACQUELINE -FRANA VOICE (760) 777-7125 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 6/10/2015 6055 LAKE GENEVA DR 18- a= RENO, NV 92253 c z L 0 Contractor: S A C G•L SCRIVENS CONSTRU IN� P 0 BOX 13302 on PALM DESERT, CA.922 _O Z3; (760)837-9918 Llc. No.: 807645 WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one ofthe following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 37001of the Labor Code, for the performance of the wgck•Pbr which this permit is issued. V I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the perfornance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier: _ Policy Number: _ I certify that in the performance of fie work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3'0 he Labor Code, I s all forthwith comply with those provisions. Date: !� l d Applicant: WARNING: FAILURE TO SECURE WORKERS' CONI ENS N COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,0013). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this_ application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application , the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the Zity of La Quinta, its officers, agents, and employees for any act or omission related to tF a work being performed under or following issuance of this permit. 2. Any permit issued as a result of this appliotion becomes null and void if work is not commenced within 180 days from date of Cssuance of such permit, or cessation of work for 180 days will subject permit to cancel.ation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this cityto/Rter upon the�llbove- mentioned property for inspection purposes. Y Date:O�� ignature (Applicant or Agent) FINANCIAL INFORMATION DESCRIPTION ACCOUNT QTY AMOUNT 1 PAID PAID DATE HOURLY PLAN CHECK - YES 101-0000-42600 1.75 $122.50 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forBLDG CITY STAFF - PER HOUR: $122.50 $0.00 - DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE BSAS SB1473 FEE 101-0000-20306 0 $2.00 $0.00 PAID BY METHOD RECEIPT # = CHECK # 'CLTD BY Total Paid forBUILDING STANDARDS ADMINISTRATION BSA: $2.00 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RESIDENTIAL, FIRST 1,000SF 101-0000-42403 0 $145.03 $0.00 PAID BY` METHOD RECEIPT # CHECK # CLTD BY .DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RESIDENTIAL, FIRST 1,000SF, PC 101-0000-42600 0 $47.86 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forELECTRICAL - NEW CONSTRUCTION: $192.89 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE APPLIANCE REPAIR/ALTERATION 101-00.00-42402 0 $12.09 $0.00 PAID BY METHOD RECEIPT # = CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE APPLIANCE REPAIR/ALTERATION PC 101-0000-42600 0 $4.83 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid for MECHANICAL: $16.92 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE NEW CONSTRUCTION PERMIT 101-0000-42400. 0 $458.49 $0.00 PAID BY METHOD RECEIPT # - CHECK # CLTD BY Total Paid forNEW CONSTRUCTION PERMIT: $458.49 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE NEW CONSTRUCTION PLAN CHECK 101-0000-42600 0 $828.66 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forNEW CONSTRUCTION PLAN CHECK: $828.66 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT = PAID PAID DATE GAS SYSTEM, 1-4 OUTLETS 101-0000-42401 1 0 $12.09 $0.00 y M., W'1- - I -, 'PPAID'-'B ETHODf; A e B il"M gg'R K� 'N =17i�'/-E� 5. t P41, # 1 4, -*-."Acc R3 `QTY ,N) -DESCRIKTIOW t iT.s AMOUNT TE GAS SYSTEM, 1-4 OUTLETS PC 101-0000-42600 0 $24.17 $0.00 J' RECEIPT eavtl, Total Paid for PLUMBING FEES: $36.26 $0.00 up ACCOUNT 'p'qN z. `--IIAMOUN MILE W; REMODEL, EA ADDITIONAL 500 SF 101-0000-42400 0 $21.75 $0.00 d4R : T;' METHOD K'CLTD T iW� T, BY NE &1W K R, B1t';N1i' A CO U N T— I "N 2 ma e4 seug" '�'-PAIWDAW' .'x- W, "IR 5 REMODEL, EA ADDITIONAL 500 SF PC 101-0000-42600.. 0 $17.40 $0.00 `METHOD.i:K, 'K PUS W ACCOUNTS AMI 2;'�!,�z` PAIM-t �PAIDDATE; REIVIODEL-, FIRST 100 SF 0 $49.31 $6.00 i-�'CLTDZYK yu E R l) SC IPTION" ACCOUNT, 20� QTY AMOUNTSs "'� T." t REMODEL, FIRST 500 SF PC 101-0000-42600 0✓ $134.88 $0.00 �jl PAID BY Um 0, I .;9 3j14{YjufTD-13y'101, NY V %METHODS w! W, -��RECEIPT, r W. IECK4,1U,% 61 I —7 Total Paid forREMODEL: $223.34 $0.00 DESCRIPTIOWt� COUNT AMOUNT, PAID tp SMI - RESIDENTIAL ..101-0000-20308 0 $6.50 $0.00 gi METHOD'1'0"'� R ft I'OT #1 -�&HEC -�-,QT ,BY— L j'� M gg H I i� % Total Paid forSTRONG MOTION INSTRUMENTATION SMI:' $6.50 $0.00 TOTALS: $1,887.56 $0.00'_ Description: FRANA RESIDENCE / PATIO ENCLOSURE TO LIVING SPACE 230 SF Type: BUILDING, RESIDENTIAL Subtype: REMODEL Status: APPROVED Applied: 5/11/2015 MFA Approved: 6/10/2015 JJO Parcel No: 777190011 Site Address: 53749 VIA PISA LA QUINTA,CA 92253 Subdivision: TR 29894-2 Block: Lot: 286 Issued: Lot Sq Ft: 0 Building Sq Ft: 0 Zoning: Finaled: Valuation: $50,000.00 Occupancy Type: Construction Type: Expired: No. Buildings: 0 No. Stories: 0 No. Unites: 0 Details: CONVERT CABANA TO OFFICE, CONVERT LOFT TO BEDROOM AND ADD BBQ AREA AND PATIO. PER 2013 CRC CODES ADDITIONAL CHRONOLOGY. CHRONOLOGY TYPE STAFF NAME ACTION DATE COMPLETION DATE NOTES NOTE JIM JOHNSON 6/5/2015 6/10/2015 PENDING STRUC CORRECTIONS NO STRUCTURAL CALCS WERE INCLUDED. JAKE NOTIFIED NOTE MARY FASANO 5/11/2015 5/11/2015 ANTON AND PLANS ARE SITTING ON KAY'S PROCESSING DESK. PLAN CHECK COMMENTS FROM CONSULTANT MARY FASANO 6/8/2015 6/8/2015 APPROVED BY YOUNG RECEIVED PUBLIC COUNTER VISIT MARY FASANO 5/20/2015 5/20/2015 CALCS WERE BROUGHT IN BY ANTON. PLAN CHECK NOW BEING PROCESSED TO YOUNG ENGINEERING. TELEPHONE CALL JIM JOHNSON 6/10/2015 6/10/2015 CALLED SCRIVENS CONST. TO INFORM HIM, SCHOOL FEES AND ASSESSORS SET REQUIRED TO ISSUE. CONDITIONS Printed: Wednesday, June 10, 2015 3:17:40 PM 1 of 4 SYSTEMS FINANCIAL INFORMATION R4141 CLTD. NAME TYPE NAME ADDRES51 CITY STATE ZIP PHONE FAX EMAIL APPLICANT G L SCRIVENS CONSTRUCTION INC P 0 BOX 13302 PALM DESERT CA 92255 CONTRACTOR G L SCRIVENS CONSTRUCTION INC P 0 BOX 13302 PALM DESERT CA 92255 OWNER JACQUELINE FRANA 6055 LAKE GENEVA DR RENO NV 92253 FINANCIAL INFORMATION CLTD. DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY BY HOURLY PLAN CHECK - 101-0000-42600 1.75 $122.50 $0.00 YES Total Paid forBLDG CITY STAFF - PER HOUR: $122.50 $0.00 BSAS SB1473 FEE 101-0000-20306 0 $2.00 $0.00 Total Paid forBUILDING STANDARDS ADMINISTRATION $2.00 $0.00 BSA: RESIDENTIAL, FIRST 101-0000-42403 0 $145.03 $0.00 1,000SF RESIDENTIAL, FIRST 101-0000-42600 0 $47.86 $0.00 1,000SF, PC Total Paid for ELECTRICAL -NEW CONSTRUCTION: $192.89 $0.00 APPLIANCE 101-0000-42402 0 $12.09 $0.00 REPAIR/ALTERATION APPLIANCE 101-0000-42600 0 $4.83 $0.00 REPAIR/ALTERATION Pt Total Paid for MECHANICAL: $16.92 $0.00 NEW CONSTRUCTION 101-0000-424000 $458.49 $0.00 PERMIT Total Paid for NEW CONSTRUCTION PERMIT: $458.49 $0.00 Printed: Wednesday, June 10, 201513:17:40 PM 2 of 4 J SYS TEhAS INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED ] COMPLETED DATE DATE RESULT REMARKS NOTES FINAL" BLD CLTD DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE RECEIPT # CHECK # METHOD PAID BY BY NEW CONSTRUCTION 101-0000-42600 0 $828.66 $0.00 PLAN CHECK Total Paid forNEW CONSTRUCTION PLAN CHECK: $828.66 $0.00 GAS SYSTEM, 1-4 101-0000-42401 0 $12.09 $0.00 OUTLETS GAS SYSTEM, 1-4 101-0000-42600 0 $24.17 $0.00 OUTLETS PC ' Total Paid for PLUMBING FEES: $36.26 $0.00 REMODEL, EA 101-0000-42400 0 $21.75 $0.00 ADDITIONAL 500 SF REMODEL, EA 101-0000-42600 0 $17.40 $0.00 ADDITIONAL 500 SF PC REMODEL, FIRST 100 SF 101-0000-42400 0 $49.31 $0.00 REMODEL, FIRST 500 SF j 101-0000-426000 $134.88 $0.00 PC Total Paid for REMODEL: $223.34 $0.00 SMI - RESIDENTIAL, 101-0000-20308 0. $6.50 $0.00 Total Paid forSTRONG MOTION INSTRUMENTATION SMI $6.50 $0.00 TOTALS:$0.00 INSPECTIONS SEQID INSPECTION TYPE INSPECTOR SCHEDULED ] COMPLETED DATE DATE RESULT REMARKS NOTES FINAL" BLD PARENT PROJECTS Printed: Wednesday, June 10, 2015 3:17:40 PM 3 of 4 ?SYSTEMS Permit Details � PERMIT NUMBER City of La Quinta BRES2015=01$9 STRUCTURAL . YOUNG 5/20/2015 6/10/2015 6/8/2015 READY FOR APPROVAL ENGINEERING NON-STRUCTURAL JJIMJOHNSONJ 5/20/2015 1 6/10/2015 1 6/10/2015 1 APPROVED BOND INFORMATION Printed: Wednesday, June 10, 2015 3:17:40 PM 4 of 4EAS §? SYSTEMS ein # City of La Quinta Building 8t Safety Division 6 P.O. Box 1504, 78-495 Calle Tampico �� La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # 7�e— . - g� W Project Address: 6—S7 V 1 Owner's Name: A. P. Number: 7 . S1G Address: S -'g cjc U1. Legal Description: e5a y? Contractor: L. S City, ST, Zip: G/7S4 G T ele hone: P 72L Address: 7 4-5-6,10^q b tzProject Description: City, ST, Zip: ele h one: TP � AlU ' Oma,! 612S State Lic. # : D7,0y City Lic. Arch., Engr., Designer: Address: -S77-- (/l1l,Py`- City., ST, Zip: 5 f: e Telephone: 7 �G on truct i e• n TY P OecuP an cY: U Troject State Lie. #: hPa (circle one • New Add'n Repair Demo Name of Contact Person: Sq. Ft.:�25O57't-- # Stories: 2 # Units: Telephone # of Contact Person: Estimated Value of Project: sQ Oct:) CC APPLICANT: DO NOT WRITE BELOW THIS LINE t! Submittal Req'd Rec'd TRACKING PERMIT FEES Plan Sets Plan Check submitted Item Amount Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Calcs. Called Contact Person Plan Check Balance Title 24 Cales. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2". Review, ready for corrections/issue Electrical Subcontactor List Called ContactPerson Plumbing Grant Deed Plans picked up S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- '"' Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue School Fees . Total Permit Tees kib �- 651 is Coachella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVELONEAMOUNT: LEVELTWOAMOUNT: IV ITIGATION AMOUNT: COMMAND. AMOUNT: DATE: RECEIPT: CHECK #: INITIALS CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Name: Hid�ea Owner's Name: Gary Frana Project Address: 53-749 Via Pisa, LaQuinta Project Description: Convert Patio to A/C Space APN: 772-530-011 Tract #: Type of Development: Residential XX Total Square Feet of Building Area: Certification of Applicant/Owners: The person signing certifies penalty of perjury and further represents that he/she is authorize44 Dated: June 9, 2015 Signature: Commercial 230 Date: June 9, 2015 Phone No. 760-831-7439 Lot #'s: Industrial the above information is correct and makes this statement under tyon behalf of the owner/developer. ************************************4a** * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PR9J`ECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code Gov. Code Project Agreement Existing Not Subject to Fee 17620 65995 Approval Prior to 1/1/87 Requirement Number of Sq.Ft. Amount per Sq - Ft -Amount Collected 230 $0.00 $0.00 Building Permit Application Completed: Yes/No By: Elsa F. Esqueda, Director of Facilities and Maintenance Certificate issued by: Laurie Howard, Secreta Note: Pursuant to AB 181 any room additions or enclosures of 500 sq. ft. or less are exempt from developer fees. Any mobile homes being relocated within the same school district's jurisdiction are exempt from developer fees. Signature: NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. M V:c/nrydocs/devfees/cettilicate of compliance fonn updated 3-2007 11/2010 • Tf 68 Country iub is Ste. B Paim Reser# GA 92 Ph (FO) 772 :5107 01 17 5-76�U Email in +o@valuengr:com eb www_valuer+gr,cam Letter of Transmittal To: City of La Quinta Today's Date: 6-8-15 78-495 Calle Tampico City Due Date: 6-3-15 La Quinta, CA 92253 Project Address: 53749 Via Pisa Attn: Kay Plan Check #: BRES 2015-0189 Submittal: ® 1st ❑ 4th ❑ 2nd ❑ 55th ❑ 3rd ❑ Other: We are forwarding: ® By Messenger ❑ By Mail (Fed Ex or UPS) ❑ Your Pickup Includes: # Of Descriptions: Includes: # Of Descr ptions: Copies: Copies: ® 1 Structural Plans ❑ Revised Structural Plans ® 1 Structural Calculations ❑ Revised Struct. Calcs ❑ Truss Calculations Floor and Roof ❑ Revised Truss ❑ Soils Report ❑ Revissd Soils Report ® 1 Structural Comment List ❑ Apprcved Structural Plans ❑ Redlined Structural Plans ❑ Apprcved Structural Calcs ❑ ' Redlined Structural Calcs ❑ Apprcved Truss Calcs ❑ Redlined Truss Calcs ❑ Apprcved Soils Report ❑ Redlined Soils Reports ❑ Other. Comments: Structural content is approvable. If you have any questions, please call. Time = 1.75 HR This Material Sent for: ❑ Your Files ❑ Your Review ❑ Checking Other: ❑ BY: Kathryn Samuel Palm Desert Office: ® (760) 772-510; Other: ❑Et ® Per Your Request ❑ Approval ❑ At the request of: CIT Y OF LA, QUINTA COMMUNITY DEVELOPMENT Ih_..- I BUILDING ENERGY ANALYSIS REPORT I PROJECT: Frana Residence Lot 286 The Hideaway La Quinta, CA 92253 Project Designer: Stracts Architecture 550 S. Oleander Palm Springs, CA 92662 (760) 636-8951 Report Prepared by: Jon Scott Scott Design and Title 24, Inc, 77-085 Michigan Drive Palm Desert, CA 92211 (760) 200-4780 C, 1-y eU Di' QUINT APP & SAFETY DEP FOR COR®,/E® VCTION DATe 61 J[A/rte ,- __ Job Number: MAY 11 2015 Date: CITY OF LA QUINTA 4/23/2015 COMMUNITY DEVELOPMENT The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC — www.energysoft.com. viol CERTI*E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF&F-01 Page 1 of 9 GENERAL INFORMATION 01 Project Name Frana Residence 02 This building incorporates features that require field testing and/orverification by a certified HERS rater under the supervision of a CEC-approved HERS provider. 02 Calculation Description Title 24 Analysis 03 Project Location Lot 286 The Hideaway ENERGY USE SUMMARY 04 City La Quinta 05 Standards Version Compliance 2015 06 Zip Code 92253 07 Compliance Manager Version BEMCmpMgr 2013-3c (710) 08 Climate Zone CZ15 09 Software Version EnergyPro 6.5 10 Building Type Single Family 11 Front Orientation (deg/Cardinal) 315 12 Project Scope Addition and/or Alteration 13 1i Number of Dwelling Units 1 14 Total Cond. Floor Area (FT2) 4357 15 'tjo Number of Zones 3 16 Slab Area (FT2) 3677 0.00 Number of Stories 2 18 Addition Cond. Floor Area 240 �1�91, Natural Gas Available Yes 20 Addition Slab Area (FT2) 240 .2�1 Glazing Percentage (%) 18.7% Aw COMPLIANCE RESULTS t v 01 Building Complies with Computer Performance AtW; 02 This building incorporates features that require field testing and/orverification by a certified HERS rater under the supervision of a CEC-approved HERS provider. 03 This building incorporates one or more Special Features shown below ENERGY USE SUMMARY 04 O!Q®; 06 07 08 Energy Use Standard (kTDV/ft2-yr) Design Proposed Design Compliance Margin Percent Improvement Space Heating fj12.25 9.51 2.74 22.4% Space Cooling 287.68 268.82 18.86 6.6% IAQ Ventilation w 0.00 Water Heating 7.55 0.00 7.55 0.00 0.00 0.0% U.U% Photovoltaic Offset — 0.00 0.00 — Compliance Energy Totaly 307.48 tWC 285.88 21.60 7.0% .0 Registration Number: CA Building Energy Efficiency StanbaMs - 2013 Residential Compliance Registration Date/Time: Report Version - CFIR-04012015-710 HERS Provider: Report Generated at: 2015-04-23 09:37:24 CERTIFW OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. CFIOF-01 Page 2 of 9 HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: High Quality Insulation Installation (QII) Cooling System Verifications: • — None — HVAC Distribution System Verifications: • -- None — Domestic Hot Water System Verifications: • — None — ENERGY DESIGN RATING This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an on-site renewable energy system. �A► Reference Energy Use �` Energy Design Rating Margin Percent Improvement Total Energy (kTDV/f2-yr)* 345.62 . 324.02 1 21.60 6.2% ` Includes calculated Appliances and Miscellaneous Energy Use (AMEU) A ; a# _v. BUILDING - FEATURES INFORMATION V 01 02 `03 04 05 06 07 �♦►•�• Numb"er of Dwelling Zone Floor Area Avg. Ceiling Number of Ventilation Number of Water Project Name Conditioned Floor Area (ft2) �� Units Number of Bedrooms Number of Zones Cooling Systems Heating Systems Frana Residence 4357 r 1 9 3 1 1 V ZONE INFORMATION _W 01 02 03 04 0S 06 07 �♦►•�• Zone Floor Area Avg. Ceiling Zone Name Zone Typ Q HVAC System Name (ft2) Height Water Heating System 1 Water Heating System 2 residence Condittioned HVAC1 3437 14 DHW Sys 1 addition Conckioned HVAC1 240 14 DHW Sys 1 2nd floor Conditioned HVAC1 680 14 1 DHW Sys 1 Registration Number: ,� CA Building Energy Efficiency Standa ds - 2013 Residential Compliance Registration Date/Time: Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-04-23 09:37:24 g oueA&Y CERTI*E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xmi CFI•RF-01 Page 3 of 9 OPAQUE SURFACES 01 02 03 04 05 06 07 08 01 02 03 04 05 06 07 08 09 10 Name Zone Construction Azimuth Orientation Gross Area (ft) Window & Door Area (ft2) Tilt (deg) Status Verified Existing Condition NE Wall ex residence R-13 Wall 45 Left 2350 116.6 90 Existing No SE Wali ex residence R-13 Wall 135 Back 2620 253 90 Existing No SW Wall ex residence R-13 Wall 225 Right 2350 71.3 90 Existing No NW Wall ex residence R-13 Wall 315 Front 2620 112.1 90 Existing No Roof residence Defaul: 1978 to present 2757 Existing No NE Wall addition R-21 Wall (W.21.2x6.16) 45 Left 340 3 90 New N/A SE Wall addition R-21 Wall (W.21.2x6.16) 135 Back 260 56 90 New N/A SW Wall addition R-21 Wall (W.21.2x6.16) 225% Right 340 88 90 New N/A NW Wall addition R-21 Wall (W.21.2x6.16) 31 Front 80 90 New N/A Roof 2 addition R-38 Roof Attic 240 New N/A NE Wall ex 2 2nd floor R-13 Wall cj 45 Left 600 12.5 90 Existing No SE Wall ex 2 2nd floor R-13 Wall 135 Back 570 65 90 Existing No SW Wall ex 2 2nd floor R-13 Wail v 225 Right 600 3.8 90 Existing No NW Wall ex 2 2nd floor R-13 Wall `� 315 Front 520 58 90 Existing No Roof 3 2nd floor Defaul: 1978 tnresent1 680 Existing No n ATTIC �v 01 02 03 04 05 06 07 08 09 10 Radiant Statu Verified Existing Name Construction Type Roof Rise Roof Reflectance Roof Emittance Barrier Cool Roof s Condition Ex9 ti Attic residence Attic Roofresidence� Ventilated 3 0.1 0.85 No No No Attic addition Attic Roofaddition*v Ventilated 3 0.1 0.85 No No New No Eng t� Attic 2nd floor Attic Roof2nd��r Ventilated 3 0.1 0.85 No No No �O! Registration Number: CA Building Energy Efficiency Stands - 2013 Residential Compliance Registration Date/Time: Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-04-23 09:37:24 CERTIFO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE II*OD - Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CFIIOF-01 Page 4 of 9 WINDOWS 01 02 03 04 06 06 07 08 09 10 11 Name Surface (Orientation -Azimuth) Width(ft) Multiplie Height (ft) r Area (ft2) U -factor SHGC Exterior Shading Status Verified Existing Condition ex 2.5x4.5 NE Wall ex (Left -45) - - 1 11.3 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 NE Wall ex (Left -45) - - 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2.5x4.5 2 NE Wall ex (Left -45) - - 1 11.3 0.71 0.60 Insect Screen (default) Existing No ex 2x4.5 NE Wall ex (Left -45) - - 1 9.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 NE Wall ex (Left -45) - - 1 '*40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 2 NE Wall ex (Left -45) - -- 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x6 SE Wall ex (Back -135) -- - ,1 30.0 0.71 0.60 Insect Screen (default) Existing No ex 5x6 2 SE Wall ex (Back -135) - - �1r1 30.0 0.71 0.60 Insect Screen (default) Existing No ex 6x8 SE Wall ex (Back -135) - - 1 48.0 0.71 0.60 Insect Screen (default) Existing No ex6x4.5 SE Wall ex (Back -135) - - 1 27.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 3 SE Wall ex (Back -135) - 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 2x3 SE Wall ex (Back -135) - 1 6.0 0.71 0.60 Insect Screen (default) Existing No ex 2x3 2 SE Wall ex (Back -135) - G `- 1 6.0 0.71 0.60 Insect Screen (default) Existing No ex 2x3 3 SE Wall ex (Back -135) - a - 1 6.0 0.71 0.60 Insect Screen (default) Existing No ex 7.5x8 SE Wall ex (Back -135) - * - 1 60.0 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 2 SW Wall ex (Right -225) M� - 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2.5x8 SW Wall ex (Right -225) fir- 1 20.0 0.71 0.60 Insect Screen (default) Existing No ex 1.5x2.5 SW Wall ex (Right -225) �`�- - 1 3.8 0.71 0.60 Insect Screen (default) Existing No ex 2.5x5 SW Wall ex (Right -225) j v - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No ex 2.5x5 2 SW Wall ex (Right -225), , - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No ex 2.5x5 3 SW Wall ex (Right -225) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 3 SW Wall ex (Right -2,,220* - - 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 7.5x8 2 NW Wall ex (Fron,:0, 15) - - 1 60.0 0.71 0.60 Insect Screen (default) Existing No ex 4x8 NW Wall ex (Front 315) - - 1 32.0 0.71 0.60 Insect Screen (default) Existing No new 7x8.46.24 SE Wal,(B'a,&135) - -- 1 56.0 0.46 0.24 Insect Screen (default) New N/A new 8x8.46.24 SW Wall;(Right-225) - -- 1 64.0 0.46 0.24 Insect Screen (default) New N/A new 3x8.46.24 SWZOS11 (Right -225) - - 1 24.0 0.46 0.24 Insect Screen (default) New N/A ex 2.5x5 4 KN(t "Nall ex 2 (Left -45) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No ex 5x5 AFS'tWall ex 2 (Back -135) - - 1 25.0 0.71 0.60 Insect Screen (default) Existing No Registration Number: Registration Date/Time: CA Building Energy Efficiency Stands - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-04-23 09:37:24 CERTI*E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xm1 CFWF-01 Page 5 of 9 ex 5x8 4 SE Wall ex 2 (Back -135) — — 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 12.5x2.5 SW Wall ex 2 (Right -225) — — 1 3.8 0.71 0.60 Insect Screen (default) Existing No ex 5x8 5 NW Wall ex 2 (Front -315) — — 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 2x4 NW Wall ex 2 (Front -315) — — 1 8.0 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 4 NW Wall ex 2 (Front -315) — — 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 5 NW Wall ex 2 (Front -315) — — 1 5.0 0.71 0.60 Insect Screen (default) Existing No DOORS 01 02 03,0., 04 05 06 ',- Name Side of Building Area (ftZ) U -factor Status Verified Existing Condition Door NW Wall ex i 0.1 0.50 Existing No C71 OPAQUE SURFACE CONSTRUCTIONS '�V Z14111; 01 02 03 04 A 05 06 07 V Total Cavity Winter Design Construction Name Surface Type Construction Type Framing R -value U -value Assembly Layers d Cavity/Frame: no insul. /2x4 Top Chrd 2x4 Top Cho of Roof Truss @ 24 Roof Deck. Wood Siding/sheathing/decking Attic Roofresidence Attic Roofs Wood Framed Ceiling ..� in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board Ceilings (below�►•� Cavity/Frame: R-9.1 /2x4 Defaul: 1978 to present attic) Wood Framed Ceiling ��/ 2x4 @ 16 in. O.C. R11 0.083 Over Floor Joists: R-1.9 insul. l!v Inside Finish: Gypsum Board `> Cavity/Frame: R -13/2x4 Exterior Finish: Wood R-13 Wall Exterior Walls Wood Framed W�alli 2x4 @ 16 in. O.C. R 13 0.095 Siding/sheathing/decking `r- O • Cavity/Frame: no insul. /2x4 Top Chrd * 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Roofing. Roof Shingle) Attic Roofaddition Attic Roofs Wood FrariCeiling in. O.C. none 0.644 Light (Asphalt O Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-9.1 /2x4 R-38 Roof Attic attic)Wo�Framed Ceiling 2x4 @ 16 in. O.C. R 38 0.025 Over Floor Joists: R-28.9 insul. Inside Finish: Gypsum Board • Cavity/Frame: R-21 /2x6 ' Exterior Finish: Wood R-21 Wall (,21.2x6.16) Exterior Walls% Wood Framed Wall 2x6 @ 16 in. O.C. R 21 0.066 Siding/sheathing/decking S` Cavity/Frame: no insul. /2x4 Top Chrd '0 0 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Attic Roof2nd floor Attic Roofs Wood Framed Ceiling in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) .y Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CFiR-04012015-710 Report Generated at: 2015-04-23 09:37:24 CERTIFO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE MOOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF10-F-01 Page 6 of 9 SLAB FLOORS 01 02 03 04 05 06 07 08 09 Name Zone Area (ft) Perimeter (ft) Edge Insul. R -value Carpeted Fraction Heated Status Verified Existing Condition Covered Slab residence 3437 316 None 0.8 No Existing No Covered Slab 2 addition 240 47 None 0.8 No New No BUILDING ENVELOPE - HERS VERIFICATION %_ 1, 01 02 '-IV 03 04 Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation,� > Building Envelope Air Leakage ACH @ 50 Pa Required Not Required �i Not Required Y=� WATER HEATING SYSTEMS 00 01 02 03 tj 04 05 06 07 08 ® Tank Volume Energy Factor or Solar Tank Exterior Standby Loss Name Heater Element Type 4an7c Type(gal) Point -of Use Number of Fraction Insulation R -value Verified Existing Name System Type Distribution Type Water Heater Heaters N Status Condition DHW Sys 1 DHW Pipe Insulation, All Ling4,V DHW Heater 1 2 Annual Existing No A WATER HEATERS 01 02 003V 04 05 06 07 08 �`�" Tank Volume Energy Factor or Recirculation with Tank Exterior Standby Loss Name Heater Element Type 4an7c Type(gal) Point -of Use Efficiency Input Rating Insulation R -value (Fraction) DHW Heater 1 Natural Gas 4Smiil Storage 50 0.61 EF 40000-Btu/hr 0 0 O WATER HEATING - HERS VERIFICATION 01 02 '� 03 04 05 06 07 Recirculation with Recirculation with Name Pipe Insulation Parallel Piping Compact Distribution Point -of Use Manual Control Sensor Control DHW Sys 1 n/a& n/a n/a n/a n/a n/a •� Registration Number: 1%, Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standdaa"Fds - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-23 09:37:24 CERTIfE OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE IOD Project ame. Frana Residence Ca culation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xm1 CFPRF-01 Page 7 of 9 SPACE CONDITIONING SYSTEMS 01 02 03 04 05 06 07 08 09 10 Multi -speed Heating System Cooling System System Type EER 40V6 SEER Zonally Controlled Compressor HERS Verification Cooling Component 1 SplitAirCond - Split air conditioning 10.42V 12 Distribution Fan Floor Area Location Verified Existing Name System Type Name Ducted Name Ducted System System Served Status Condition HVAC1 Other Heating and Heating Yes Cooling Yes Air Distribution HVAC Fan 4357 Existing No Cooling System Component 1 Component 1 System 1 1 HVAC - HEATING SYSTEMS 01 02 03 Name Type a� Efficiency Heating Component 1 CntrlFurnace - Fuel -fire reentral furnace 80 AFUE .71' HVAC - COOLING SYSTEMS �r 01 02 03 �`-�� 04 06 06 07 07 08 Efficiency 10 Multi -speed Name System Type EER 40V6 SEER Zonally Controlled Compressor HERS Verification Cooling Component 1 SplitAirCond - Split air conditioning 10.42V 12 No No N/A Location system Status Condition Verification Air Distribution Ducts located in attic v HVAC - DISTRIBUTION SYSTEMS 01 02 03 044f�`i' 05 06 07 08 09 10 Insulation Supply Duct Return Duct Verified Existing HERS Name Type Duct Leakage k value Location Location Bypass Duct Status Condition Verification Air Distribution Ducts located in attic Existing (not 4.2 Attic Attic None Existing No N/A System 1 specified) s w IAQ (indoor Air Quality) FANS 4lobf 01 " 02 03 04 05 IAQ an Type IAQ Recovery Effectiveness(%) HERS Verification Name IAQ CFM SFam IAQVentRpt'`'� 0 Default 0 Not Required Ci COOLING VENTILATION 01 02 03 04 Name Cooling Vent CFM Cooling Vent Watts/CFM Number of Fans WH Fan 1 `� 61 0.52459 1 �O°7 Registration Number: ,�� Registration Date/Time: HERS Provider: CA Building Energy Efficiency Stanrda ds - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-23 09:37:24 CERTIF10 OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE D Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Fran a-Stracts-1 5. xm I �0 ®fir .40 .�� Registration Number: ,�� CA Building Energy Efficiency Standards - 2013 Residential Compliance Registration Date/Time: Report Version - CF1R-04012015-710 CF1�F-01 Page 8 of 9 HERS Provider: Report Generated at: 2015-04-23 09:37:24 CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE �OD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF1�F-07 Page9of9 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: d. Scott lJon Jon Scott Company: Signature Date: Scott Design and Title 24, Inc, 4/23/2015 Address: CEA/HERS Certification Identification (If applicable): 77-085 Michigan Drive City/State ip: Falco Desert, CA 92211 Phone:+ (60) 200-4780 RESPONSIBLE PERSON'S DECLARATION STATEMENT% I certify the following under penalty of perjury, under the laws of the State of California: �� 1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility fo�thhe building design identified on this Certificate of Compliance. 2. 1 certify that the energy features and performance specifications identified on this Certificate Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 3. The building design features or system design features identified on this Certificate of Comp it ante are consistent with the information provided on other applicable compliance documents, YN— worksheets, calculations, plans and specifications submitted to the enforcement agency- oapproval with this building permit application. Responsible Designer Name: Responsible Designer Signature: Stracts Architecture Company: v Date Signed: Stracts Architecture (� Address: �r0 License: 550 S. Oleander City/State/Zip: Phone: Palm Springs, CA 92662 ,�� (760) 636-8951 0� Registration Number: CA Building Energy Efficiency Standards - 2013 Residential Compliance Registration Date/Time: Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-04-23 09:37:24 • • RESIDENTIAL MEASURES SUMMARY RMS -1 Project Name Frana Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family m Existing+ Addition/Alteration Date 4/23/2015 Project Address Lot 286 The Hideaway La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 4,357 Addition 240 # of Units 1 INSULATION Construction Type Area Cavi(ft) Special Features Status Roof Wood Framed Attic R11 3,437 Existing Wall Wood Framed R 13 11,538 Existing Door Opaque Door - no insulation 20 Existing Slab Unheated Slab -on -Grade - no insulation 3,437 Perim = 316' Existing Demising Wood Framed R 13 1,035 New Roof Wood Framed Attic R 38 240 New Wall Wood Framed R 21 876 New Slab Unheated Slab -on -Grade - no insulation 240 Perim = 47' New FENESTRATION I Total Area: 816 Glazing Percentage: 18.7 % New/Altered Average U -Factor: 0.46 Orientation Areaftz U -Fac SHGC Overhang Sidefins Exterior Shades Status Left (NE) 129.1 0.710 0.60 none none Bug Screen Existing Rear (SE) 318.0 0.710 0.60 none none Bug Screen Existing Right (SW) 75.1 0.710 0.60 none none Bug Screen Existing Front (NVt9 150.0 0.710 0.60 none none Bug Screen Existing Rear (SE) 56.0 0.460 0.24 none none Bug Screen New Right (SW) 88.0 0.460 0.24 none none Bug Screen New HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 4 Central Furnace 80% AFUE Split Air Conditioner 12.0 SEER Setback Existing HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status HVAC Ducted Ducted Attic 4.2 Existing WATER HEATING Qty. Type Gallons Min. Eff Distribution Status EnerqvPro 6.5 by EnemySoft User Number.- 6712 Run Code: 2015-04-23T09:38:06 ID: Pae 12 of 26 2013 Low -Rise Residential Mandatory Measures Summary Ak 4 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the CamDliance aDDroach used. EXCeDtions may annly. Review the resnertive rnde serlinn fnr mnre infnrmntinn Building Envelope Measures: §I 10.6(a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. § 110.6(a)5: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain Coefficient SHGC and infiltration that meets the requirements of § 10-111 a . § 110.7: Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed. §I 10.8(a): Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R. § 110.8(i): The thermal emittance and aged solar reflectance values of the cool roofing material meets the requirements of §I 10.8(1) when the installation of a cool roof is specified on the CFIR. § 110.80): A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CFIR. Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a § I50.0(a): rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive or mechanical fasteners. The attic access shall be gasketed to prevent air leakage. §150.0(6): Loose fill insulation shall conform with manufacturer's installed design labeled R -value. § 150.0(c): Minimum R-13 insulation in 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 in 2x6 or 0.074 maximum U - factor). § I50.0(d): Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U -factor. In Climate Zones 14 and 16 a Class II vapor retarder shall be installed on the conditioned space side of all insulation in all exterior §150.0(g)l: walls, vented attics and unvented attics with air -permeable insulation. § 150.0(g)2: In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II vapor retarder. In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of § I50.0(g)3: the crawl space to reduce moisture entry and protect insulation from condensation, as specified in the exception to Section 150.0(d). §150.0(1): Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%; have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration; and when installed as part of a heated slab floor meets the requirements of § 110.8 150.0 § (q)' Fenestration, including skylights, separating conditioned space from unconditioned space or outdoors shall have a maximum U- factor of 0.58; or the weighted average U -factor of all fenestration shall not exceed 0.58. Fireplaces, Decorative Gas Appliances and Gas Log Measures: § I50.0(e)IA: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §I50.0(e)IB: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a readily accessible operable, and tight -fitting damper or a combustion -air control device. §I50.0(e)IC: Masonry or factory -built fireplaces have a flue damper with a readily accessible control. § I50.0(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110.0-§110.3: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified to the Energy Commission. § 110.3(c)5: Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of § 110.3(c)5. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli- §110.5: ances without an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool ands a heaters. §150.0(h)I: Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA using design conditions specified in§150.Oh2. § 150.0(h)3A: Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least five feet from the outlet of any dryer vent. § I50.0(i): Heating systems are equipped with thermostats that meet the setback requirements of § 110.2(c). §150.00)IA: Storage gas water heaters with an energy factor equal to or less than the federal minimum standards shall be externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §150.00)1 B: Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. For domestic hot water system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system § 150.00)2A: regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, piping buried below grade, and all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3- A. § I50.00)2B: All domestic hot water pipes that are buried below grade must be installed in a water proof and non -crushable casing or sleeve that allows for installation, removal, and replacement of the enclosed pipe and insulation. In 4 2013 Low -Rise Residential Mandatory Measures Summary §150.00)2C: Pipe for cooling system lines shall be insulated as specified in §150.00)2A. Piping insulation for steam and hydronic heating systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A. §150.00)3: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For § I50.00)3A: example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or hinted with coating that is water retardant and provides shielding from solar radiation that degrades the material. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I §150.00)3B: or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as a Class I or Class II vapor retarder. Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the § I50.0(n)1: space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr. § I50.0(n)2: Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5. § I50.0(n)3: Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certification Corporation (SRCC) or by a testing agency approved by the Executive Director. Ducts and Fans Measures: All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirements of CMC §601.0, §602.0, §603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or higher if required by CMC §605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing (RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastened. Openings shall be sealed § ] 50.0(m)1: with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 'A inch, the combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints § 150.0(m)2: and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. §150.0(m)3-6: Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastics, sealants, and other requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling. §150.0(m)7: All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic dampers. § I50.0(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers except combustion inlet and outlet air openings and elevator shaft vents. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind but not § 150.0(m)9: limited to the following: insulation exposed to weather shall be suitable for outdoor service. For example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation. § I50.0(m)10: Flexible ducts cannot have porous inner cores. When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be §I50.0(m)11: sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in length and through a thermal §I50.0(m)12: conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of §150.0 m 12. Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPP) in the supply plenum. The §] 50.0(m)13: space conditioning system must also demonstrate airflow >_ 350 CFM per ton of nominal cooling capacity through the return grilles, and an air -handling unit fan efficacy <_ 0.58 W/CFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering, in every zonal control mode, §I50.0(m)15: an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of> 350 CFM per ton of nominal cooling capacity, and operating at an air -handling unit fan efficacy of <_ 0.58 W/CFM as confirmed by field verification and diagnostic testing,in accordance with Reference Residential Appendix RA3. All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operation nor continuous operation of § 150.0(0): central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the Whole Building Ventilation. §150.0(o)]A: Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Pool and Spa Heating Systems and Equipment Measures: Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency § 110.4(a): Regulations; an on-off switch mounted outside of the heater that allows shutting off the heater without adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating. 4 2013 Low -Rise Residential Mandatory Measures Summary § 110.4(b)1: Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction and return lines, or built-up connections for future solar heating. § 110.4(b)2: Outdoor pools or spas that have a heat pump or gas heater shall have a cover. § 110.4(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro - rammed to run only during off-peak electric demand periods. § 110.5: Natural gas pool and spa heaters shall not have a continuous burning pilot light. § 150.0(p): Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements. Lighting Measures: § 110.9: All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9. § ] 50.0(k)I A: Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with § 150.0(k) in accordance with TABLE 150.0-A or TABLE 150.0-B, as applicable. §150.0(k)]B: When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply with the applicable provisions of § 150.0(k). The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with §150.0(k)IC: § 130.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180 watts of low efficacy lighting er electrical box. §I50.0(k)ID: Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no §I50.0(k)]E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with §130.0(c). Night lights do not need to be controlled by vacancy sensors. §150.0(k)1F: Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable requirements of § ] 50.0(k). § I50.0(k)2A: High efficacy luminaires must be switched separately from low efficacy luminaires. §150.0(k)2B: Exhaust fans shall be switched separately from lighting systems. § I50.0(k)2C: Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF. § 150.0(k)2D: Controls and equipment are installed in accordance with manufacturer's instructions. § I50.0(k)2E: No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with § I50.0(k). §I50.0(k)2F: Lighting controls comply with applicable requirements of §110.9. An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if. it functions as a dimmer §] 50.0(k)2G: according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of §130.5; and all other requirements in §150.0(k)2. An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of §I50.0(k) if: it § 150.0(k)2H: functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5 • and all other requirements in ' 150.0(k)2. § I50.0(k)2I: A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the functionality of a dimmer according to § 110.9, and complies with all other applicable requirements in §150.0(k)2. § 150.0(k)3A: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only § 150.0(k)3B: the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are considered kitchen lighting if they are not separately switched from kitchen lighting. § 150.0(k)4: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. § I50.0(k)5: A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom shall be high efficacy or controlled by vacancy sensors. §150.0(k)6: Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and controlled by vacancy sensors. § I50.0(k)7: Lighting installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy, or shall be controlled by either dimmers or vacancy sensors. Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing §150.0(k)8: and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and allow ballast maintenance and replacement without requiring cutting holes in the ceiling. For recessed compact fluorescent luminaries with ballasts to qualify as high efficacy for compliance with § 150.0(k), the ballasts shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9. For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements: i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and § I50.0(k)9A: ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically reactivates the motion sensor within 6 hours; and iii. Controlled by one of the following methods: 2013 Low -Rise Residential Mandatory Measures Summary 0 a. Photocontrol not having an override or bypass switch that disables the photocontrol; or b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is programmed to automatically turn the outdoor lighting OFF during daylight hours; or c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of an astronomical time clock in accordance with §110.9; meets the Installation Certification requirements in §130.4; meets the requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and, is programmed to automatically turn the outdoor lighting OFF during daylight hours. For low-rise multifamily residential buildings, outdoor lighting for private patios, entrances, balconies, and porches; and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site shall comply with one of the §I50.0(k)9B: following requirements: i. Shall comply with §I50.0(k)9A; or ii. Shall comply with the applicable requirements in §110.9, §130.0, §130.2, 130.4, 140.7 and §141.0. § 150.0(k)9C: For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by § 150.0(k)9B or 150.0(k)9D shall comply with the applicable requirements in 110.9 '130.0 130.2 '130.4, 140.7 and §141.0. § I50.0(k)9D: Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply with the applicable requirements in § 110.9 130.0, § 130.2, § 130.4, § 140.7 and $141.0. §150.0(k)10: Internally illuminated address signs shall comply with § 140.8; or shall consume no more than 5 watts of power as determined ' according to 130.0(c). § I50.0(k)1 l: Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for ' ' ' ' nonresidential garages in 110.9 130.0 130.1 130.4 § 140.6 and ' 141.0. In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of § I 50.0(k) I 2A: the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or controlled by an occupant sensor. In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building shall: §150.0(k)12B: i. Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and Off from all designed paths of ingress and egress. Solar Ready Buildings: Single family residences located in subdivisions with ten or more single family residences and where the application for a § 110.10(a)l: tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014, shall comply with the requirements of $110.10 b through §110.10(e). § 110.10(a)2: Low-rise multi -family buildings shall comply with the requirements of § 110.10 6 through § 110.10(d). The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less than 160 square feet each for §I 10.10(b)1: buildings with roof areas greater than 10,000 square feet. For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof or overhang of the building or on the roof or overhang of another structure located within 250 feet of the building or on covered parking installed with the building project and have a total area no less than 15 percent of the total roof area of the building excluding any skylight area. § 110.10(b)2: All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north. §110.10(b)3A: No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mounted equipment, shall be located in the solar zone. Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice § 110.10(b)3B: the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal ro'ection of the nearest point of the solar zone measured in the vertical plane. §I 10.10(b)4: For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof live load shall be clearly indicated on the construction documents. The construction documents shall indicate: a location for inverters and metering equipment and a pathway for routing of conduit § 110.10(c): from the solar zone to the point of interconnection with the electrical service (for single family residences the point of interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating system. § 110.10(d): A copy of the construction documents or a comparable document indicating the information from § 110.10(b) through §110. 10(c) shall be provided to the occupant. § 110.10(e)1: The main electrical service panel shall have a minimum busbar rating of 200 amps. The main electrical service panel shall have a reserved space to allow for the installation of a double pole circuit breaker for a § 110.10(e)2: future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or main circuit location, and permanently marked as "For Future Solar Electric". 0 4 4 4 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Tana Residence Date 4/23/2015 System Name HVAC Floor Area 4,357 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 4 COIL CFM Total ROOM Loads 9,100 Return Vented Lighting Return Air Ducts Return Fan Ventilation 1,017 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK Sensible 118,533 0 8,100 01 44,411 0 8,100 179,145 COIL HTG. Latent CFM 10,861 3,416 16,222 1,017 27,083 PEAK Heating System Sensible Output per System 89,000 125,328 Total Output Btuh 356,000 Output Btuh/s ft 81.7 6,788 Cooling System 0 Output per System 57,800 48,906 Total Output Btuh 231,200 0 Total Output Tons 19.3 6,788 Total Output Btuh/s ft 53.1 Total Output s ft/Ton 226.1 187,808 Air System CFM per System 2,000 HVAC EQUIPMENT SELECTION Airflow cfm 8,000 Existing HVAC 164,821 37,200 356,000 Airflow cfm/s ft 1.84 Airflow cfmrron 415.2 Outside Air % 12.7% Total Adjusted System Output (Adjusted for Peak Design conditions) I TIME OF SYSTEM PEAK 164,821 37,200 356,000 Aug 3 PM Jan 1 AM Outside Air cfm/s ft 0.23 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 65 OF Outside Air 1,017 cfm Supply Fan 8,000 cfm 71 OF 65 OF 107 OF Heating Coil -� 106 OF ROOM 72 OF 1 COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 76/64°F 76/64°F 57/56°F Outside Air c 1,017 cfm Supply Fan Cooling Coil 8,000 cfm 71/61°F 60.9% 58 / 56 OF ROOM 11 70/61°F Energ Pro 6.5 by Energ Soft User Number., 6712 RunCode: 2015-04-23709:38:06 ID: Page 17 of 26 • • • ROOM LOAD SUMMARY Project Name Frana Residence Date 4/23/2015 System Name HVAC Floor Area 4,357 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING 'EAK COIL HTG. PEAK Zone Name Room Name Mult. CFM Sensible Latent CFM Sensible Latent CFM Sensible residence altered residence 1 6,935 90,331 8,568 6,935 90,331 8,568 2,636 96,726 addition new addition 1 540 7,032 598 540 7,032 598 237 8,683 2nd floor 2nd floor res 1 1,625 21,171 1,695 1,625 21,171 1,695 543 19,918 1 Total includes ventilation load for zonal systems. PAGE TOTAL TOTAL ' 9,100 9,100 118, 533 10,8611 118, 53 10,8611 3,416 125,328 3,416 125,328 EnergyPro 6.5 by EnergySoft User Number. 6712 Run Code: 2015-04-23T09:38:06 ID: Pae 18 of 26 C] • • ROOM HEATING PEAK LOADS Project Name Frana Residence Date 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Floor Area 3,437.0 f' Indoor Dry Bulb Temperature 72 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction Area U -Value Defaul: 1978 to present 2,757.0 X 0.0790 R-13 Wall 9,387.0 X 0.1020 Existing Window 532.9 X 0.7100 Wood Door 20.1 X 0.5000 Slab -On -Grade perim = 316.0 X 0.7300 'R-13 Wall 722.0 X 0.1020 X X X X X X X X X X X X X X X X X X X X X X X X X Items shown with an asterisk (•) denote conduction through an interior surface to another room Infiltration:[ 1.00 X 1.064 X 3,437 X 14.00 X 0.361 Schedule Air Sensible Area Ceiling Height ACH Fraction X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X AT OF Btu/hr = 10,019 = 44,044 c 17,405 = 462 = 10,611 = 0 = = = = = = = = = = = = = = = = = = = = = = 82,541 46 = 14,185 46 46 46 46 46 0 Page Total /60] X AT TOTAL HOURLY HEAT LOSS FOR ROOM 96,726 EnergyPro 6.5 by EnergySoft User Number: 6712 Run Code: 2015-0423709:38:06 ID: Page 19 of 26 • • LJ ROOM HEATING PEAK LOADS Project Name Frana Residence ROOM INFORMATION Room Name Floor Area Indoor Dry Bulb Temperature Conduction R-38 Roof Attic R-21 Wall (W.21.2x6.16) LowE METAL .46.24 Slab -On -Grade "R-13 Wall DESIGN CONDITIONS new addition Time of Peak 240.0 ft' Outdoor Dry Bulb Temperature 72 OF Area 240.0 876.0 144.0 perim = 47.0 101.0 U -Value X 0.0260 X X X 0.0690 X X 0.4600 X 0.7300 X X X X X X 0.1020 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Items shown with an asterisk (') denote conduction through an interior surface to another room Infiltration:[ 1.00 X 1.064 X 240 X 14.00 X 0.361 Schedule Air Sensible Area Ceiling Height ACH Fraction TOTAL HOURLY HEAT LOSS FOR ROOM AT *F 46 46 46 46 0 Page Tc /60] XC Al 4/23/2015 Jan 1 AM 26 OF Btu/hr 287 2,780 c 3,047 1,578 c 0 'till 7,693 46 0 991 6831 EnergyPro 6.5 by EnergySoft User Number: 6712 Run Code: 2015-04-23T09:38:06 ID: Page 20 of 26 • C 1 U ROOM HEATING PEAK LOADS Project Name Frana Residence Date 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name 2nd floor res Floor Area 680.0 ft2 Indoor Dry Bulb Temperature 72 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 OF Conduction Area U -Value 680.0 X 0.0790 2,150.7 X 0.1020 139.3 X 0.7100 212.0 X 0.1020 X X X X X X X X X X X X X X X X X X X X X X X X X X X through an interior surface to another room X 680 X 14.00 X 0.361 Area Ceiling Height ACH AT °F Btu/hr X 46 c 2,471 X 46 c 10,091 X 46 = 4,550 X 0 = 0 X X = X = X X o X X = X = X X = X = X = X = X = X = X = X = X X = X = X = X = X = X = X = X = X = Page Total 17,112 /60] X 46 = 2,806 AT Default 1978 to present R-13 Wall Existing Window 'R-13 Wall Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X 1.064 Schedule Air Sensible Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 19,918 EnergyPro 6.5 by EnergySoft User Number: 6712 Run Code: 2015-0423709:38:06 ID: Page 21 of 26 • RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Frana Residence 1 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Outdoor Dry Bulb Temperature 112 OF Floor Area 3,437.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF Outdoor Daily Ranqe: 34 OF Opaque Surfaces Defauh. 1978 to present R-13 Wall R-13 Wall R-13 Wall R-13 Wall Wood Door 'R-13 Wall Orientation (►M (NE) (SE) (SK9 (NW) (NW) Area X X X X X X X X X U -Factor X X X X X X X X X CLTD' = = = = = = = = = Z757.0 0.0790 56.0 2,233.4 0.1020 29.0 2,367.0 0.1020 31.0 2,278.7 0.1020 31.0 2,507.9 0.1020 30.2 20.1 0.5000 30.2 722.0 0.1020 0.0 55.8 0.0 36.5 40.0 55.8 0.0 36.5 30.0 Page Total Items shown'with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fpnpctratinn ex 2.5x4.5 ex 2x2.5 ex 2.5x4.5 ex 2x4.5 ex 5x8 ex 5x8 ex 5x6 ex 5x6 ex 6x8 Orientation (NE) (NE) (NE) (NE) (NE) (NE) (SE) (SE) (SE) Shaded Unshaded Area X X X X X X X GLF + + + + + + + Area X .X X X X X X GLF = = = = = = = 0.0 36.5 11.3 55.8 0.0 36.5 5.0 55.8 0.0 36.5 11.3 55.8 0.0 36.5 9.0 55.8 0.0 36.5 40.0 55.8 0.0 36.5 40.0 55.8 0.0 36.5 30.0 50.3 0.0X 36.5+ 30.0X 50.3= 0.0X 36.5+ 48.0X 50.3= Page Total Btu/hr 12,197 7, 7, 7, 41 Btu/hr 630 279 630 502 2,230 2,230 1,508 1,508 2,413 11,931 Internal Gain Btu/hr Occupants 10.3 Occupants X 245 Btuh/occ. 2,; Equipment 3,437 Floor Area X 0.50 w/sgft = Infiltration: 1.064 X 1.27 X 220.52 X 42 = C Air Sensible CFM ELA AT I TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 90.331 Latent Gain Btu/hr Occupants 10.3 Occupants X 155 Btuh/occ. = 1,598 Infiltration: 4,771 X 1.27 X 220.52 X 0.00523 = 6,969 Air Sensible CFM ElA AW • TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1.598 I EnemyPro 6.5 by EneMySoR User Number: 6712 RunCode: 2015-04-23709:38:06 ID: Paae 22 of 26 1 • • • RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Frana Residence 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Outdoor Dry Bulb Temperature 112 OF Floor Area 3,437.0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF Outdoor Dailv Ranae: 34 OF ue Surfaces Orientation Area U -Factor CLTD' X X = X X = X X = X X = X X = X X = X X = X X = X X = Page Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Fenestration ex6x4.5 ex 5x8 ex 2x3 ex 2x3 ex 2x3 ex 7.5x8 ex 2x2.5 ex 2.5x8 ex 1.5x2.5 Orientation (SE) (SE) (SE) (SE) (SE) (SE) (SM (SIM (SIAL Shaded Unshaded Area X X X X X X X X GLF + + + + + + + + Area X X X X X X X X GLF = = = = = = = = 0.0 36.5 27.0 50.3 0.0 36.5 40.0 50.3 0.0 36.5 6.0 50.3 0.0 36.5 6.0 50.3 0.0 36.5 6.0 50.3 0.0 36.5 60.0 50.3 0.0 36.5 5.0 50.3 0.0 36.5 20.0 50.3 0.0X 36.5+ 3.8X 50.3= Page Total Btu/hr 01 Btu/hr 1,357 2,011 302 302 302 3,017 251 1,006 191 8,7381 rnal Gain Btu/hr ants 10.3 Occupants X 245 Btuh/occ. = 2,! ment 3,437 Floor Area X 0.50 w/sgft = 5 Infiltration: 1.064 X 1.27 X 220.52 X 42 = Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 90,331 Latent Gain Btu/hr Occupants 10.3 Occupants X 155 Btuh/occ. = 1,598 Infiltration: 4,771 X 1.27 X 220.52 X 0.00523 = 6,969 Air Sensible CFM ELA AW ROOM 1 1 EnergyPro 6.5 by EnergVSoft User Number: 6712 Run Code: 2015-0423709:38:06 ID: Page 23 of 26 F- � LA C • RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Frana Residence 1 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Outdoor Dry Bulb Temperature 112 OF Floor Area 3,43 7. 0 ft' Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF I Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor GLTD' Btu/hr X X = X X = X X = X X = X X = X X = X X = X X = X X = Page Total 1 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr ex 2.5x5 I's V109 0.0 X 36.5 + 12.5 X 50.3 = 628 ex 2.5x5 (SVV) 0.0 X 36.5 + 12.5 X 50.3 = 628 ex 2.5x5 (S K9 0.0 X 36.5 + 12.5 X 50.3 = 628 ex 2x2.5 (S K9 0.0 X 36.5 + 5.0 X 50.3 = 251 ex 7.5x8 (NKK 0.0 X 36.5 + 60.0 X 55.8 = 3,346 ex 4x8 (NVIO 0.0 X 36.5 + 32.0 X 55.8 = 1,784 X + X = X + X = X + X = Page Total 7,26 Internal Gain Btu/hr Occupants 10.3 Occupants X 245 Btuh/occ. = 2,526 Equipment 3,437 Floor Area X 0.50 w/sgft = 5,865 Infiltration: 1.064 X 1.27 X 220.52 X 42 = 12,473 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 90,331 Latent Gain Btu/hr Occupants 10.3 Occupants X 155 Btuh/occ. = 1,598 Infiltration: 4,771 X 1.27 X 220.52 X 0.00523 = 6,969 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,598 EnemyPro 6.5 by EneMySoft User Number: 6712 Run Code: 2015-04-23T09:38:06 ID: Page 24 of 26 0 RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Frana Residence 1 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name new addition Outdoor Dry Bulb Temperature .1120F Floor Area 240.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF I Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr R-38 Roof Attic (IM 240.0 X 0.0260 X 56.0 = 349 R-21 Wall (W.21.24.16) (NE) 340.0 X 0.0690 X 29.0 = 680 R-21 Wall (W.21.2x6.16) (SE) 204.0 X 0.0690 X 31.0 = 436 R-21 Wall (W.21.24.16) (SW) 252.0 X 0.0690 X 31.0 = 539 R-21 Wall (W.21.2x6.16) (NIM 80.0 X 0.0690 X 30.2 = 167 *R-13 Wall 101.0 X 0.1020 X 0.0 = 0 X X = X I X = X X = Page Total 2,172 Items shown with an asterisk (`) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr new 7x8.46.24 (SE) 0.0 X 18.1 + 56.0 X 23.6 = 1,323 new 8x8.46.24 (SW) 0.0 X 18.1 + 64.0 X 23.6 = 1,512 new 3x8.46.24 (SW) 0.0 X 18.1 + 24.0 .X 23.6 = 567 X + X = X + X = X + X = X + X = X + X = X + X = Page Total 3,403 Internal Gain Btu/hr Occupants 0.7 Occupants X 245 Btuh/occ• = 176 Equipment 240 Floor Area X 0.50 w/ggft = 410 Infiltration: 1.064 X 1.27 X 15.40 X 42 = 871 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 7,032 Latent Gain Btu/hr Occupants 0 7 Occupants X 155 Btuh/oca = 112 Infiltration: 4,771 X 1.27 X 15.40 X 0.00523 = 487 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 112 EnemvPro 6.5 by EnemySoft User Number. 6712 Run Code: 2015-04-23T09:38:06 ID: Page 25 of 26 • �J RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Frana Residence 4/23/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name 2nd floor res Outdoor Dry Bulb Temperature 112 OF Floor Area 680.0 ft2 Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF I Outdoor Daily Range: 34 OF Opaque Surfaces Orientation Area U -Factor t1TD' Btulhr Default 1978 to present (W) 680.0 X 0.0790 X 56.0 = 3,008 R-13 Wall (NE) 587.5 X 0.1020 X 29.0 = 1,738 R-13 Wall (SE) 505.0 X 0.1020 X 31.0 = 1,597 R-13 Wall (SlM 596.2 X 0.1020 X 31.0 = 1,885 R-13 Wall (NW) 462.0 X 0.1020 X 30.2 = 1,425 `R-13 Wall 212.0 X 0.1020 X 0.0 = 0 X X = X X = X X = Page Total 9,653 Items shown with an asterisk (`) denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF Btu/hr ex 2.5x5 (NE) 0.0 X 36.5 + 12.5 X 55.8 = 697 ex 5x5 (SE) 0.0 X 36.5 + 25.0 X 50.3 = 1,257 ex 5x8 (SE) 0.0 X 36.5 + 40.0 X 50.3 = 2,011 ex 12.5x2.5 (SIM 0.0 X 36.5 + 3.8 X 50.3 = 191 ex 5x8 (NM 0.0 X 36.5 + 40.0 X 55.8 = 2,230 ex 2x4 (NW) 0.0 X 36.5 + 8.0 X 55.8 = 446 ex 2x2.5 (NIAq 0.0 X 36.5 + 5.0 X 55.8 = 279 ex 2x2.5 (NW) 0.0 X 36.5 + 5.0 X 55.8 = 279 X + X = Page Total 1 7,390 Internal Gain Btu/hr Occupants 2.0 Occupants X 245 Btuh/occ_ = 500 Equipment 680 Floor Area X 0.50 w/sgft = 1,160 Infiltration: 1.064 X 1.27 X 43.63 X 42 = 2,468 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 21,171 Latent Gain Btu/hr Occupants 2 0 Occupants X 155 Btuh/occ. = 316 Infiltration: 4,771 X 1.27 X 43.63 X 0.00523 = 1,379 Air Sensible CFM Et.A AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 316 EnemvPro6.5 by EnemySoft User Number: 6712 Run Code: 2015.04-23709:38:06 ID: Page 26 of 26 CERTIFIO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE 410D Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xmi CF10F-01 Pagel of 9 GENERAL INFORMATION 01 Project Name Frana Residence Building Complies with Computer Performance 02 Calculation Description Title 24 Analysis r . • .. r � • � This building incorporates features that requirexv field tes�tingr f+and/orv veri,,,,.-.fication by ai certified HERS rateri untder�.the supervision of a CEC-approved HERS provider. 03 03 Project Location Lot 286 The Hideaway 04 City La Quinta 05 Standards Version Compliance 2015 06 Zip Code 92253 07 Compliance Manager Version BEMCmpMgr 2013-3c (710) 08 Climate Zone CZ15 09 Software Version EnergyPro 6.5 10 Building Type Single Family 11 Front Orientation (deg/Cardinal) 315 12 Project Scope Addition and/or Alteration 13 Number of Dwelling Units 1 14 Total Cond. Floor Area (FT2) 4357 15 Number of Zones 3 16 Slab Area (FT2) 3677 17 Number of Stories 2 18 Addition Cond. Floor Area 240 19 Natural Gas Available Yes 20 Addition Slab Area (FT2) 240 21 Glazing Percentage (%) 18.7% COMPLIANCE RESULTS 01 Building Complies with Computer Performance 02 r . • .. r � • � This building incorporates features that requirexv field tes�tingr f+and/orv veri,,,,.-.fication by ai certified HERS rateri untder�.the supervision of a CEC-approved HERS provider. 03 This building incorporates one'oi more Special Features s_hown;below� Ia t i t.. f A J f 1 V t L --F i.. i A ENERGY USE SUMMARY 04 05 06 07 08 Energy Use M (kTDV/ft2-yr) Standard Design Proposed Design Compliance Margin Percent Improvement n Space a 12.25 9.51 2.74 22.4% R7 Spao9C0�1 287.68 268.82 18.86 6.6% r 1 jirent o 0.00 0.00 7.55 0.00 0.00 0.0% 0.0% a Q H–egin 7.55 Pi�%�I O et — 0.00 0.00 — ire 9derhy Total 307.48 285.88 21.60 7.0% : U5 -1b. m -77 - zOCY �z n Numbe,, 0) Standards - 2013 Residential Compliance Registration Date/Time: 2015-04-23 09:51:07 Report Version - CF1R-04012015-710 HERS Provider: CaICERTS inc. Report Generated at: 2015-04-23 09:37:30 CERTIF& OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD CF10F-01 Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Page 2 of 9 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: • High Quality Insulation Installation (QII) Cooling System Verifications: — None — HVAC Distribution System Verifications: • — None — Domestic Hot Water System Verifications: • —None -- ENERGY DESIGN RATING This is the sum of the annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual TDV energy consumption for lighting and components not regulated by Tide 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an on-site renewable energy system. rt y-... — _ Reference Energy Usef Energy Design Rating Margin Percent Improvement Total Energy (kTDV/f2-yr)* y 345.62 {{ i 324.02 21.60 6.2% NZA includes calculated Appliances and Miscellaneous EnergytU�se (AMEU) ERS PROVIDER BUILDING —FEATURES INFORMATION D 01 02 03 04. 05 06 07 M 1 Zone Type Number of Dwelling Zone Floor Area (ft2) Avg. Ceiling Height Number of Ventilation Number of Water C Project Name= __q Conditioned Floor Area (ft2) Units Number of Bedrooms Number of Zones Cooling Systems Heating Systems Fran. ate -side k 1 4357 1 9 3 1 1 = I ��J Z INFU N� Ti _< r Cn 02 03 04 05 06 07 C -n ZoQi .0 Zone Type HVAC System Name Zone Floor Area (ft2) Avg. Ceiling Height Water Heating System 1 Water Heating System 2 r e Conditioned HVAC1 3437 14 DHW Sys 1 fTi Z Conditioned HVAC1 240 14 DHW Sys 1 2nd floo" K Conditioned HVAC1 680 14 DHW Sys 1 Registration Number: 215-A0106559A-000000000-0000 Registration Date/Time: 2015-04-23 09:51:07 HERS Provider: CaICERTS inc. CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-23 09:37:30 CERTIF* OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE MOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xmi CF1�F-01 Page 3 of 9 OPAQUE SURFACES 01 02 03 04 05 06 07 08 09 01 02 03 04 05 06 07 08 09 10 Name Zone Construction Azimuth Orientation Gross Area (ft2) Window & Door Area (ft) Tilt (deg) Status Verified Existing Condition NE Wall ex residence R-13 Wall 45 Left 2350 116.6 90 Existing No SE Wall ex residence R-13 Wall 135 Back 2620 253 90 Existing No SW Wall ex residence R-13 Wall 225 Right 2350 71.3 90 Existing No NW Wall ex residence R-13 Wall 315 Front 2620 112.1 90 Existing No Roof residence Defaul: 1978 to present 2757 Existing No NE Wall addition R-21 Wall (W.21.2x6.16) 45 Left 340 90 New N/A SE Wall addition R-21 Wall (W.21.2x6.16) 135 Back 260 56 90 New N/A SW Wall addition R-21 Wall (W.21.2x6.16) 225 Right 340 88 90 New N/A NW Wall addition R-21 Wall (W.21.2x6.16) 315 Front 80 90 New N/A Roof 2 addition R-38 Roof Attic 240 New N/A NE Wall ex 2 2nd floor R-13 Wall 45 Left 600 12.5 90 Existing No SE Wall ex 2 2nd floor r�' _ J�y13 Waller` d - � 4135 w ((Back ! [ y�.57,0 C:Z� 65 90 Existing No SW Wall ex 2 2nd floor., tR-13 Wally € 1*�225�i I Right_ 11 fJ 600 {( 3.8 90 Existing No NW Wall ex 2 2nd floor) 'R=13 Wall "`" 315- _ —Front/ -'V � 520 �'` " 58 90 Existing No Roof 3 2nd floor Defaul:11978`tO present I— r1 1IL-.,' 680 rN I Existing No ATTIC 01 02 03 04 05 06 07 08 09 10 Radiant Statu Verified Existing Name Construction Type Roof Rise Roof Reflectance Roof Emittance Barrier Cool Roof s Condition DAttic residence Attic Roofresidence Ventilated 3 0.1 0.85 No No En9ti No MY 0 A additi& Attic Roofaddition Ventilated 3 0.1 0.85 No No New No 4 r d flzr Attic Roof2nd floor Ventilated 3 0.1 0.85 No No Ex9 ti No Z U . —1 Q < �O� C -n M JO oho egistration Numb—��: A Building Energy Ef 106559A-000000000-0000 Registration Date/Time: 2015-04-23 09:51:07 Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: CaICERTS inc. Report Generated at: 2015-04-23 09:37:30 CERTIF•E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE F*OD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CFOF-01 Page 4 of 9 WINDOWS 01 02 03 04 05 06 07 08 09 10 11 Name Surface (Orientation -Azimuth) Width(ft) Multiplie Height (ft) r Area (ft) U -factor SHGC Exterior Shading Status Verified Existing Condition ex 2.5x4.5 NE Wall ex (Left -45) - - 1 11.3 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 NE Wall ex (Left -45) - -- 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2.5x4.5 2 NE Wall ex (Left -45) - - 1 11.3 0.71 0.60 Insect Screen (default) Existing No ex 2x4.5 NE Wall ex (Left -45) - - 1 9.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 NE Wall ex (Left -45) - - 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 2 NE Wall ex (Left -45) - - 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x6 SE Wall ex (Back -135) - - 1 30.0 0.71 0.60 Insect Screen (default) Existing No ex 5x6 2 SE Wall ex (Back -135) - - 1 30.0 0.71 0.60 Insect Screen (default) Existing No ex 6x8 SE Wall ex (Back -135) - - 1 48.0 0.71 0.60 Insect Screen (default) Existing No ex6x4.5 SE Wall ex (Back -135) - - 1 27.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 3 SE Wall ex (Back -135) - - 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 2x3 SE Wall ex (Back -135) f� i 1 l� ,- ((! 1-#i (it 6.0 i 0. 7,1 0.6_Ot Insect Screen (default) Existing No ex 2x3 2 SE Wall ex (Back-135)V,,f I f �i 1 11 '6`.0 10.7 1 10; 60 Insect Screen (default) Existing No ex 2x3 3 SE Wall ez'(Back-135) `" `'' �_ - _ 1 "_ `_"6.011 '0.71 _ 6'60' ' Insect Screen (default) Existing No ex 7.5x8 SE Wall ex (Ba6k-`.135) 1-1 C rN -t- Ei 1 60.0 1 L0:71 t 0:60 Insect Screen (default) Existing No ex 2x2.5 2 SW Wall ex (Right -225) - - 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2.5x8 SW Wall ex (Right -225) - - 1 20.0 0.71 0.60 Insect Screen (default) Existing No ex 1.5x2.5 SW Wall ex (Right -225) - - 1 3.8 0.71 0.60 Insect Screen (default) Existing No ex 2.5x5 SW Wall ex (Right -225) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No D ex 2.5x5 2 SW Wall ex (Right -225) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No m ex 2.5x5 SW Wall ex (Right -225) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No 2 F 7.. 8 SW Wall ex (Right -225) NW Wall ex (Front -315) - -- - 1 - 1 5.0 60.0 0.71 0.71 0.60 0.60 Insect Screen (default) Insect Screen (default) Existing Existing No No Qex 80 NW Wall ex (Front -315) - - 1 32.0 0.71 0.60 Insect Screen (default) Existing No n63 SE Wall (Back -135) - - 1 56.0 0.46 0.24 Insect Screen (default) New N/A < '9 x8 .42 SW Wall (Right -225) - - 1 64.0 0.46 0.24 Insect Screen (default) New N/A 2 SW Wall (Right -225) - - 1 24.0 0.46 0.24 Insect Screen (default) New N/A NE Wall ex 2 (Left -45) - - 1 12.5 0.71 0.60 Insect Screen (default) Existing No x xrFi7 77 rri SE Wall ex 2 (Back -135) - - 1 25.0 0.71 0.60 Insect Screen (default) Existing No R gistration Numbgri --'A 106559A-000000000-0000 Registration Date/Time: 2015-04-23 09:51:07 HERS Provider: CaICERTS inc. Efficien Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-23 09:37:30 CERTIFO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE MOOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF1�F-01 Page 5 of 9 ex 5x8 4 SE Wall ex 2 (Back -135) — — 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 12.5x2.5 SW Wall ex 2 (Right -225) — — 1 3.8 0.71 0.60 Insect Screen (default) Existing No ex 5x8 5 NW Wall ex 2 (Front -315) — — 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 2x4 NW Wall ex 2 (Front -315) — — 1 8.0 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 4 NW Wall ex 2 (Front -315) — — 1 5.0 0.71 0.60 Insect Screen (default) Existing No ex 2x2.5 5 NW Wall ex 2 (Front -315) — — 1 1 5.0 0.71 1 0.60 1 Insect Screen (default) Existing No DOORS 01 02 03 04 05 06 Name Side of Building Area (W) U -factor Status Verified Existing Condition Door NW Wall ex 20.1 0.50 Existing No OPAQUE SURFACE CONSTRUCTIONS 01 02 03 04 05 06 07 Total Cavity Winter Design Construction Name Surface Type Construction Type Framing R -value U -value Assembly Layers /� j i i ( — �� , I C -)) � - I I � . (: 2x4>Top Chord of Roof Truss @ 24- "P C _— f � 0.644 • Cavity / Frame: no insul. / 2x4 Top Chrd Roof Deck. Wood Siding/sheathing/decking Attic Roofresidence Attic Roofs `Wood Framed Ceifn") in. O.C. ri (none Roofing: Light Roof (Asphalt Shingle) �# E �} R S R 0 x �, I D�: R Inside Finish: Gypsum Board Ceilings (below i 1 i" �f Cavity/Frame: R -9.1/2x4 Defaul: 1978 to present attic) Wood Framed Ceiling 2x4 @ 16 in. O.C. R11 0.083 Over Floor Joists: R-1.9 insul. • Inside Finish: Gypsum Board • Cavity/Frame: R -13/2x4 • Exterior Finish: Wood R-13 Wall Exterior Walls Wood Framed Wall 2x4 @ 16 in. O.C. R 13 0.095 Siding/sheathing/decking • Cavity/ Frame: no insul. / 2x4 Top Chrd DAttic 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Roofadditi(M n Attic Roofs Wood Framed Ceiling in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) r Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-9.1 /2x4 R-38 oofti attic) Wood Framed Ceiling 2x4 @ 16 in. O.C. R 38 0.025 Over Floor Joists: R-28.9 insul. 0!7 Inside Finish: Gypsum Board z iso Cavity / Frame: R-21 / 2x6 IJ) (1) • Exterior Finish: Wood [- R�1 Wa 21 2$6.1 Exterior Walls Wood Framed Wall 2x6 16 in. O.C. @ R 21 0.066 Siding/sheathing/decking C M.0 1V • Cavity/ Frame: no insul. / 2x4 Top Chrd � JLAtfttic'LM 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking ffd C: Attic Roofs Wood Framed Ceiling in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) zum J6559A-000000000-0000 R istration Number.Registration Date�me: 2015-04-23 09:51:07 HERS Provider: CaICERTS inc. uildin EnergyEfficieandards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-04-23 09:37:30 CERTIF•E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE OOD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF*F-01 Page 6 of 9 SLAB FLOORS 01 02 03 04 05 06 07 08 09 Name Zone Area (ft) Perimeter (ft) Edge Insul. R -value Carpeted Fraction Heated Status Verified Existing Condition Covered Slab residence 3437 316 None 0.8 No Existing No Covered Slab 2 addition 240 j 47 j None 0.8 No New j No BUILDING ENVELOPE - HERS VERIFICATION 01 02 03 04 Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage ACH @ 50 Pa Required Not Required Not Required — WATER HEATING SYSTEMS 01 02 03 04 05 06 07 08 Name System Type li�Number (Distribution Typ �� lWater.Heater of Heaters Solar Fraction (°/a) Status Verified Existing Condition DHW Sys 1 DHWPipe;I isuleGon All Lin`es�o LL -.-t, 3 t, jDHW.He6ter1 U2a 0.61 EF Annual Existing No � % I % r r -v. r^ r -r rt rte.: % r r WATER HEATERS ti 4 40 — 4 . " . 01 02 03 04 05 06 07 08 Name Heater Element Type Tank Type Tank Volume (gal) Energy Factor or Efficiency Input Rating Tank Exterior Insulation R -value Standby Loss (Fraction) DHW Heater 1 Natural Gas Small Storage 50 0.61 EF 40000-Btu/hr 0 0 WATE DATING - ATION T 01 l-I o !— 02 Pipe Insulation 03 04 05 06 07 Parallel Piping Compact Distribution Point -of Use R6dlreulatiort wlttt Manual Control Recirculailun with Sensor Control DFLq z n/a n/a n/a n/a n/a n/a v v vi CyXQ C -n M On C ,Istration;aui rm2 0, i Building Energy FACi�r t 0000000-0000 Registration Date/Time: 2015-04-23 09:51:07 - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: CaICERTS inc. Report Generated at: 2015-04-23 09:37:30 CERTIF* OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE &WD Project Name: Frana Residence Calculation Date/Time: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF1�F-01 Page 7 of 9 SPACE CONDITIONING SYSTEMS 01 02 03 04 05 06 07 08 09 Zonally Controlled Multi -speed Compressor Heating System Cooling System S IitAirCond - Split air cjonditioriin p ys 1 ��g s stem i Bypass Duct rlp', t1 ilii 11� 1 Verified Existing Condition 1112 ] f i N �r No N/A Distribution Fan Floor Area No Verified Existing Name System Type Name Ducted Name Ducted System System Served Status Condition HVAC1 Other Heating and Heating Yes Cooling Yes Air Distribution HVAC Fan 4357 Existing No Cooling System Component 1 Component 1 System 1 1 HVAC - HEATING SYSTEMS 01 02 03 Name Type Efficiency Heating Component 1 CntrlFurnace - Fuel -fired central furnace 80 AFUE HVAC - COOLING SYSTEMS 01 02 03 04 05 06 07 Name System Type J«1~ Efficiency 7 i1 EERY ram (7_ --,,, ;SEER, Zonally Controlled Multi -speed Compressor HERS Verification Cooling Component 1 S IitAirCond - Split air cjonditioriin p ys 1 ��g s stem i Bypass Duct rlp', t1 ilii 11� 1 Verified Existing Condition 1112 ] f i N �r No N/A HVAC - DISTRIBUTION SYSTEMS `A t' -"t I-- t"( �> t-1 ti U V ! U t K 01 02 03 04 05 06 07 08 09 10 Name Type Duct Leakage Insulation R -value Supply Duct Location Return Duct Location Bypass Duct Status Verified Existing Condition HERS Verification Q istrib�ttio located in attic ysystem 1 Existing (not specified) 4.2 Attic Attic None Existing No N/A m - t J 1 I (Indoo iP'4uz113y)F 02 03 04 05 IAQ CFM IAQ Fan Type IAQ Recovery Effectiveness(%) HERS Verification I 4W IftVent 0 Default 0 Not Required r% V J L OLIN Lig I 02 03 04 0— Cooling Vent CFM Cooling Vent Watts/CFM Number of Fans a 1 61 0.52459 1 I L �NuZ0106559A-000000000-0000 Registration Date/Time: 2015-04-2309:51:07 CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: CaICERTS inc. Report Generated at: 2015-04-23 09:37:30 f ` y U C_ N d' W U U L w O L CL N K w 2 Gl 0 C O 00 G1 cc O M n M 01 O M N V O Ln r-1 O N Y CLI Y I cu C cu (9y O O. w W- CITY OF LA QUINT BUILDING & SAFETY DEPT,N APPROVED � � FOR CONSTRUCTION Z = w to O C DATE BY N Q U CERTIFO OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE JOD Project Name: Frana Residence ation DatefTime: 09:35, Thu, Apr 23, 2015 Calculation Description: Title 24 Analysis Input File Name: Frana-Stracts-15.xml CF1*F-01 Page 9 of 9 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: Tim Scott Company: Signature Date: Scott Design and Title 24, Inc. 2015-04-23 09:51:07 Address: CEA/HERS Certification Identification (If applicable): 77085 Michigan Drive City/State/Zip: Phone: Palm Desert, CA 92211 (760) 200-4780 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. I am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance. 2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the California Code of Regulations. 3. The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted!jo-the enforcement agencyJor approval with this building permit application. Responsible Designer Name: Responsible Designer Signature1 %uXi.�cai Tim Scott L.�-� r, Company: Date, Signed, 09:51:07 Scott Design and Title 24, Inc. 2M15-042 Address: License: 77085 Michigan Drive na City/State/Zip: Phone: Palms -B (760) 200-4780 M WO 71 c- 00Do ��z o�g ca C) Digit 11 5gned a RAS. s t c m info tion. � z°O'1M.Z� Reg ation Number: 24-01 6 CA er Efficiency Sta signature is provided in order to secure the content of this registered document and in noway implies Registration Provider responsibility for the accuracy of the Registration Date/Time: 2015-04-23 09:51:07 ards - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: CaICERTS inc. Report Generated at: 2015-04-23 09:37:30