Loading...
07-0835 (SFD)4 P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Application Number: 07-00000835 Owner: Property Address: 80180 VIA PESSARO ANDREW LANDIS APN: 772-550-017- - - 77-933 LAS MONTANAS RD. Application description: DWELLING - SINGLE FAMILY DETACHED SUOTE 204 Property Zoning: LOW DENSITY RESIDENTIAL PALM DESERT, CA 92211 /application valuation: 320681 r_— Applicant: = Applicant: Architect or Engineer: Lic. No.: OOR SQUARE FOOT LICENSED ONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am Ii ___d under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and P fessionals Code, and my License is in full force and effect. License Class: B C10 Licencg[Vo.: 746198 Date: ~f Contractor: OWNER -BUILDER DECLARATION 1 hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (_ 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractorls) licensed pursuant to the Contractors' State License Law.). ( 1 I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPERAIIT Contractor: D A & M CONSTRUCTION P.O. BOX 366 LA QUINTA, CA 92247 (760)564-4832 LiC. No.: 746198 VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 U JUL, 17 2007 CITY QF LA QUINTA 17/AIA2J0%— ___ Date: 7/16/07 WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 0009232-2007 1 certify that, in the performanc of the work for which this permit is issued, I shall not employ any person in any manner so as o become subject to the workers' compensation laws of California, and agree that, ifJORKERS' me subject to the workers' compensation provisions of Section ) 3�7r0-f0 of the Labll forthwith comply with those provisions. Dater^L7 ` Applicant: WARNING: FAILURE TO SECURCOMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. 1 certify that I have read this application and state-th4abovormation is correct. 1 agree to comply with all city and county ordinances and state laws relating touction, and hereby authorize representatives of this county to enter upon the above-mentioned prction purposes. . Date: 7-1 ` Signature (Applicant or Agent): Application Number . . . . . 07-00000835 Permit BUILDING PERMIT Additional desc . . Permit Fee. . . . . 1413.00 Plan Check Fee 918.45 Issue Date . . . . Valuation 320681 Expiration Date 1/12/08 Qty Unit Charge Per Extension BASE FEE 639.50 221.00 3.5000 THOU BLDG 100,.001-500,000 773.50 Permit . . . ELEC-NEW RESIDENTIAL Additional desc . . Permit Fee . . . . 175.05 Plan Check Fee "43.76 Issue Date . . . . Valuation 0 Expiration Date . . 1/12/08 Qty Unit Charge Per Extension BASE FEE 15.00 3627.00 .0350 ELEC NEW RES - 1 OR 2 FAMILY 126.95 905.00 .0200 ELEC GARAGE OR NON-RESIDENTIAL 18.10 1.00 ---------------------------------------------------------------------------- 15.0000 EA ELEC TEMPORARY POWER POLE 15.00 Permit . . . GRADING PERMIT Additional desc . . Permit Fee . . . . 15.00 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 1/12/08 Qty Unit Charge Per Extension ------------------------- - BASE -------------------------------------------------- FEE 15.00 Permit . . . MECHANICAL Additional desc . Permit Fee . . . . 108.00 Plan Check Fee 27.00 Issue Date . . . . Valuation . . . . 0 Expiration Date 1/12/08 Qty Unit Charge Per Extension BASE FEE 15.00 3.00 9.0000 EA MECH FURNACE <=100K 27.00 3.00 9.0000 EA MECH B/C <=3HP/100K BTU 2.7.00. 5.00 6.5000 EA MECH VENT FAN 32.50 1.00 ----------------------------------------------------------------------------- 6.5000 EA MECH EXHAUST HOOD 6.50 LQPERMIT Application Number . . . . . 07-00000835 Permit . . . PLUMBING Additional desc . . Permit Fee . . . . 173.25 Plan Check Fee 43.31 Issue Date . . . . Valuation . . . . 0 Expiration Date . . 1/12/08 Qty Unit Charge Per Extension BASE FEE 15.00 18.00 6.0000 EA PLB FIXTURE 108.00 7..nn 7.5000 FA PTR WATER HEATER/VENT 15.00 1.00 3.0000"EA PLB WATER INST/ALT/REP 3.00 1.00 9.0000 EA PLB LAWN SPRINKLER SYSTEM 9.00 11.00 .7500 EA PLB GAS PIPE >=5 8.25 1.00 15.0000 EA PLB GAS METER 15.00 ---------------------------------------------------------------------------- Special Notes and Comments 3627 SQ. FT. SFD THIS PERMIT DOES NOT INCLUDE POOL & SPA BLOCK WALLS OR DRIVEWAY APPROACH.July 16, 2007 12:08:19 PM jjohnson ---------------------------------------------------------------------------- Other Fees . . . . . . . ART IN PUBLIC PLACES -RES 301.70 DIF COMMUNITY CENTERS -RES 74.00 DIF CIVIC CENTER - RES 995.00 ENERGY REVIEW FEE 91.85 DIF FIRE PROTECTION -RES 140.00 GRADING PLAN CHECK FEE 15.00 DIF LIBRARIES - RES 355.00 DIF PARK MAINT FAC - RES 22.00 DIF PARKS/REC - RES 892.00 STRONG'MOTION (SMI) - RES 32.06 DIF STREET MAINT FAC -RES 67.00 DIF TRANSPORTATION - RES 1930.00 Fee summary Charged ---------- Paid Credited ------------------------------ Due ----------------- Permit Fee Total 1884.30 .00 .00 1884.30 Plan Check Total 1032.52 750.00 .00 282.52 Other Fee Total 4915.61 .00 .00 4915.61 Grand Total 7832.43 750.00 .00 7082.43 LQPERIIIIT P.O. BOX 1504 07, 3 Building 'Il ' / 1 h oQ , Q 78-495 CALLE TAMPICO APPLICATION ONLY Address r</ x/75 �'�1 LA QUINTA, CALIFORNIA 92253 Owner \' BUILDING: TYPE CONST. v OCC. GRP. S Mailing LAS �1 _2 Address �– �j'�j LA 1b,n N 5 04d. L A.P. Number ��� I � r Cit l Zip9 2A I T� J L 0 1 Legal Description / Contralctor Project Description rofl Address �� b City Zip Tel. State Lic. City Sq. Ft. ,'7 I�►,`J No. /) No. Dw. & Classif. Lic. # Size L Stories Units Arch., Engr., l New Add ❑ Alter ❑ Repair ❑ Demolition ❑ Designer City Zip )2-b� State 04 1 Lic. # C `j LICENSED CONTRACTOR'S DECLARATION I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Secvon 7000) of Division 3 of the Business and Professions Code, and my license is in full forc/&nd effect. OWNER -BUILDER DECLARATION hereby affirm that I am exempt from the Contractor's License Law for the following reaso : (Sec. 7031.5, Business and Professions Code: Any city or county whicli requires a permit construct, alter, improve, demolish, or repair any structure, prior to its issuance also requires a applicant for such permit to file a signed statement that he is licensed pursuant to the provis ns of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of Division 3 the Business and Professions Code, or that he is exempt therefrom", and the basis for the alleg exemption. Any violation of Section 7031.5 by any applicant forep permit subjects the applicant a civil penalty of not more than live hundred dollars ($500 ❑ I, as owner o the property, or my employees with wages as their sole c pensation, will do the work, and th structure is not intended or offered for sale. (Sec. 7044, usiness and Profes- sions Code: The ntractor's License Law does not, to an owner property who builds or improves thereoVwnworkho does such work himself or through his ow employees, provided that such improvere not intended or o/%red for sale. If, how ver the building or im- provement is soldne year of completion, the owner-builde willhave the burden of proving that he didld or improve for the purpose of sale). ❑ I, as owner of thy, am exclusively contracting with licen ed contractors to construct the project. (Sec. smess and Pro/essions Code: The C ntractor's License Law does not apply to an owarty who buildsorimproves there ,and who contracts for such projects with a cons) 'caned pursuant to the Contract is License Law) ❑ 1 am exempt un. B. & P.C. for this rea on WORKER'S C MPENSAT'ON 4'ECLARATION I hereby affirm that I have a certific to of consent 6 self -insure, or a certificate of Worker's Compensation Insurance, or a certified 6Rpy thereof. (Sec. 3800, Labor Code.) Policy No. Company O Copy is filed with the city. O Cer ifi CERTIFICATE OF WORKERS'COMPE (This section need not be completed if the p4 or less). I certify that in the performance of the0� employ any person in any manner so as to qei California. / Date Owner hereby furnished. for one hundred dollars ($100) valuation which this permit is issued, I shall not Ipject to Workers' Compensation Laws of NOTICE TO APPLICANT If, after makin this Certifice subject to the Workers' Compensatio provisions of comply with such provisions or this pe&it shall be dee r Exemption you should become abor Code, you must forthwith ?voked. CONSTjiUCTION LENDING AGENC I hereby affirm that there is a nstruction lending agency fort performance of the work for which this permit is issued. (S6c. 3097, Civil Code.) Lender's Name Lender's Address This is a building permits(When properly filled out, signed and v\1awsrelat d is subject to expiration if work thereunder is suspended for 180 days. I certify that I have read this application and state that the abotion is correct. I agree to comply with all city and county ordinances and state QQg to building construction, and hereby authorize representatives of this city to enter the abode -mentioned property for ins pactionrpurposes. Signature of applicant Date Mailing Address City, State, Zip WHITE = BUILDING DEPARTMENT Estimated Valuation I 41vd , O J PERMIT Plan Chk. Dep. Plan Chk. Bal. Const. Mech. Electrical Plumbing S.M.I. Grading Driveway Enc. Infrastructure E t TOTAL REMARKS AMOUNT ZONE: BY: Minimum Setback Distances: Front Setback frim Center Line Rear Setback from Rear Prop. Line Side Street SetIzack from Center Line r Side Setback from Property Line FINAL DATE INSPECTOR Issued by: Validated by:— Validation: YELLOW = APPLICANT Date Permit PINK = FINANCE Coachella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVEL ONE AMOUNT: LEVEL TWO AMOUNT: AITIGATION AMOUNT: COMMAND. AMOUNT: DATE: RECEIPT: --HECK #: INITIALS: CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Name:Res'ideiice�isattLthe Hideaway, Date: 7-9-2007 Owner's Name: Andrew Landis Phone No. 564-4832 Project Address: 80-180 Via Pessaro Project Description: 1 SFD APN: 777-210-017 La Quinta, CA Tract #: Type of Development: Residential XX Commercial Lot #'s: Total Square Feet of Building Area: 3,627 sq, ft, sq. ft. Certification of Applicant/Owners: The person signing certifies that .penalty of perjury and further represents that he/she is authorized to sig Dated: 7-9-07 Signature: Industrial bove information is correct and makes this statement under behalf of the owner/deveroper. f 1 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * k * * * * * * * * * * * * * * * * SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code 17620 Number of Sq.Ft. Amount per Sq.Ft. Amount Collected Gov. Code 65995 3,627 sq. ft. $ 3.48 $ 12,621.96 Project Agreement Existing Not Subject to Fee Approval Prior to 1/1/87 Requirement Note: Building Permit Application Completed: Yes/No By: Carey M. Carlson, Asst. Supt., Business Services Certificate issued by: Maria L. Angulo, Facilities Secretary Signature: NOTICE OF 9.0 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this D.strict provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day (period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts )n the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions maybe granted. At such time as this Certificate. expires, if a building permit has not been issued for the project that is the subject of this Certificate, the owner will be reimbursed all fees that were paid to obtain this Certificate of Compliance. MV:c/mydoesfdevfees/certificate of compliance form tablesTO USE.doc 1/16/03 T Certificate of Occupancy Tjht 4 4 Q" Building & Safety Department This Certificate is issued pursuant to the requirements of Section 1.09 of the California Building Code, certifying that, at the time of issuance, this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/or use. BUILDING ADDRESS: 80-180 VIA PESSARO Use classification: SINGLE FAMILY DWELLING Occupancy Group: R-3 Owner of Building: ANDREW LANDIS Building Official Type of Construction: VN Building Permit No.: 07-835 Land Use Zone: RL Address: 77-933 LAS MONTANAS RD. #204 City, ST, ZIP: PALM DESERT, CA 92211 By: STEVE TRAXEL Date: MAY 5, 2008 IN A CONSPICUOUS PLACE I I TITLE 24 REPORT I Title 24 Report for: Andrew Landis 80-180 Via Pessaro La Quinta, CA 92253 Project Designer: Stephen Nieto 78-120 Calle Estado Suite 206 La Quinta, CA 92253 760-564-4707 Report Prepared By: Stephen Nieto South West Concepts 78120 Calle Estado, Suite 206 La Quinta, CA 92253 (760) 564-4707 Job Number: 4532 D 72007[ Date: MAR <2 1/10/2007 OF -A QUINTA The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: 4532 User Number 5970 I TABLE OF CONTENTS I Cover Page 1 Table of Contents 2 Form CF -1 R Certificate of Compliance 3 Form MF -1 R Mandatory Measures Summary 8 Form WS -5R Residential Kitchen Lighting 10 HVAC System Heating and Cooling Loads Summary 11 Room Load Summary 12 L_ EnergyPro 4.3 by EnergySoft Job Number: 4532 User Number 5970 Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R Andrew l and*.-, Project Title 1/10/2007 Date 80-180 Via PesSarn I a Qijinta Project Address Building Permit # SOL1th West Conre._pts (760) 564-4707 Documentation Author Telephone Plan Check/Date FneWyPro Complfrice Method 15 Climate Zone Field Check/Date TDV Standard Proposed Compliance (kBtu/sf-yr) Design Design Margin Space Heating 1.61 0.99 0.62 Space Cooling 56.07 52.34 3.74 Fans 7.94 7.39 0.55 Domestic Hot Water 6.66 7.95 -1.29 Pumps 0.00 0.00 0.00 Totals 72.29 68.68 3.61 Percent better than Standard: 5.0% Building Type: [X-] Single Family ❑ Multi Family Building Front Orientation: Fuel Type: Fenestration: ❑ Addition ❑ Existing + Add/Alt (S)180 deg Natural Gas Area: 617 ft2 Avg. U: Ratio: 17.0% Avg. SHGC: BUILDING ZONE INFORMATION Zone Name 0.36 0.34 Floor Area Volume OPAQUE SURFACES Insulation Act. Type Frame Area U -Fac. Cay. Cont. Azm. Tilt /all— Wnnd 365 a n6a R_91 R-0 n 1R0 _gn Wall Wnnd 456 0.069 R_21 R-0.0 270 gn Wall Wood 470 0.069 R_21 R-0.0 _n gn Wall Wnnd dd9 n 089 R-91 R_n_0 An gn Roof Wood x,744 0 021 R_38 R-0 0 _nn Wall Wnnd RO 0.069 R_21 R-0.0 1R0 go Wall Wnnd 2nn n n69 X21 R_n n 97n gp Wall Wnnd 123 n n6s R_91 R -n n _n gn Wall Wood 163 n 069 R-21 R-0.0 gn gn Roof Wood 414 _0 025_ R_3g R -0 _n 0 n Total Conditioned Floor Area: Existing Floor Area: Raised Floor Area: Slab on Grade Area: Average Ceiling Height: Number of Dwelling Units: Number of Stories: # of Units Zone Type Thermostat Type sathark 3,627 ft2 n/a ft2 0 ft2 3,213 ft2 10.0 ft 1.00 2 Vent Hgt. Area S n/a Gains Condition Y / N Status JA IV Reference Location / Comments EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Pane:3 of 12 1 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Andrew Landis 1/10/2007 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area U-Factorl SHGCZ Azm. Tilt Stat. Glazing Type Comments J-- Window Front (S) 51.0 0.340 FRC 0.33 NFRC 180 _9.Q -New Andersen Permashield 1st Floor 2 Window Front (S) 144.0 0.340 NFRC 0_33 NFRC 180 90 New Andersen Permashield 1st Floor 3 Window Left (W) 19.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield 1st Floor 4 Window Left (W) 19.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield 1st Floor 5 Window Left (W) 16.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield 1st Floor 6 Window Rear (N) 8.0 0.340 NFRC 0_33 NFRC 0 90 New Andersen Permashield 1st Floor L Window Rear (N) 12.0 0.340 NFRC 0.33 NFRC 0 90 New Andersen Permashield 1st Floor 8 Window Rear (N) 12.0 0.340 NFRC 0.33 NFRC 0 90 New Andersen Permashield 1st Floor 6 Window Rear (N) 48.0 0.340 NFRC 0.33 NFRC 0 90 New Andersen Permashield 1st Floor 1Q Window Rear ()w 64.0 0_340 NFRC 0_33 NFRC 0 90 New Andersen Permashield 1st Floor 11 Window Rear (N) 30.0 0.340 NFRC 0_33 NFRC 0 90 New Andersen Permashield 1st Floor 12 Window Rear (N) 16.0 1.280 116-A 0_67 116-B 0 90 New Single Metal Tinted 1st Floor -U Window Right (F) 10.6 0.340 NFRC 0.33 NFRC 90 -,U New Andersen Permashield 1st Floor 14 Window Right (E) 10.6 0.340 NFRC 0_33 NFRC 90 90 New Andersen Permashield 1st Floor 15 Window Right (E) 20.2 0.340 NFRC 0_33 NFRC 90 90 New Andersen Permashield 1st Floor 16 Window Front (S) 4.0 0.340 NFRC 0_33 NFRC 180 90 New Andersen Permashield 2nd Floor 17 Window Front (S) 4.0 0.340 NFRC 0_33 NFRC 180 90 New Andersen Permashield 2nd Floor 18 Window Front (S) 4.0 0.340 NFRC 0.33 NFRC 180 90 New Andersen Permashield 2nd Floor 12 Window Front (S) 4.0 0.340 NFRC 0.33 NFRC 180 90 New Andersen Permashield 2nd Floor 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 11613. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fig Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 Bug Screen 0.76 2 Bug Screen 0.76 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 9 Bug Screen 0.76 10 Bug Screen 0.76 11 Bug Screen 0.76 12 Bug Screen 0.76 13 Bug Screen 0.76 14 Bug Screen 0.76 15 Bug Screen 0.76 16 Bug Screen 0.76 17 Bug Screen 0.76 18 Bug Screen 0.76 19 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick.Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Run Initiation Time: 01/10/07 13:10:20 Run Code: 1168463420 EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Page:4 of 12 Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Andrew Landis 1/10/2007 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area U-Factorl SHGC2 Azm. Tilt Stat. Glazing Type Comments 2(1 21 Window Window Left Left () (W) 40 0_340 NFRC JU3 NFRC 270 qp_ New 4.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield Andersen Permashield 2nd Floor 2nd Floor 22 Window Left (W) 4.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield 2nd Floor 23 Window Left (W) 4.0 0.340 NFRC 0_33 NFRC 270 90 New Andersen Permashield 2nd Floor 24 Window Rear (N) 48.0 0.340 NFRC 0_33 NFRC 0 90 New Andersen Permashield 2nd Floor 25 Window Rear (N) 5.0 0.340 NFRC 0_33 NFRC 0 90 New Andersen Permashield 2nd Floor 2E Window Rear (N) 40.0 0_340 NFRC 0_33 NFRQ _0 90 New Andersen Permashield 2nd Floor 27 Window Right (E) 4.0 0.340 NFRC 0_33 NFRC 90 90 New Andersen Permashield 2nd Floor a$ Window Right ()a 4.0 0340_NFRC 0_33 NFRQ 90 90 New Andersen Permashield 2nd Floor 2R Window Right (E) 4.0 0_340 NFRC 0_33 NFRC 90 90 New Andersen Permashield _ 2nd Floor 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LEA REA Dist Len Hgt Dist Len Hgt. 20 Bug Screen 0.76 Ti Bug Screen 0.76 22 Bug Screen 0.76 23 Bug Screen 0.76 24 Bug Screen 0.76 25 Bug Screen 0.76 26 Bug Screen 0.76 27 Bug Screen 0.76 28 Bug Screen 0.76 29 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments Insulation PERIMETER LOSSES Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Run Initiation Time: 01/10/07 13.10.20 Run Code: 1168463420 EnergyPro 4.3 by Energysoft User Number: 5970 Job Number 4532 Page:5 of 12 Certificate Of Compliance : Residential (Part 3 of 4) CFJ R Andrew Landis Project Title Water Heater # in Input Cap. Condition Factor 1/10/2007 Date HVAC SYSTEMS Location Heating Type Minimum Eff Cooling Type Minimum Condition Eff Status Thermostat Type HVAC System Central Furnace 93% AFUE Split Air Conditioner 14.0 SEER New Setback HVAC DISTRIBUTION Location Heating Cooling Duct Location Duct Condition R -Value Status Ducts Tested? HVAC System Ducted Ducted Attic 8.0 New Yes Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext. A O Smith Water Products CTG -50- Small Gas No Pipe Insulation 2 37,000 50 New 0.62 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (ft) Add 1/2" Control # HP Type In Plenum Outside Buried Insulation REMARKS COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Documentation Author Name: Name: Stephen Nieto Title/Firm: Stephen Nieto Title/Firm: South West Concepts Address: 78-120 Calle Estado Suite 206 Address: 78120 Calle Estado, Suite 206 La Quinta, CA 92253 La Quinta, CA 92253 Telephone: 763-564-4707 Lic. #: Telee: 760 564-4707 ph aG �c (signatur date) (si aI (date) Enforcement Agency Name: Title/Firm: Address: Telephone: (signature) (date) Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R Andrew Landis 1/10/2007 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The focal enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies 3ased on the auequacy or ine speciai jusuncation ano aocumen[a[ion suommea. HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervisio i of a CEC- Plan I Field .-.-- ..-..- ..-..- ...a _ . .� . w .w.y m.aa.v. •a nna uuvn u.cuwua aanaa u�YJa Yc Il `lVlll Y VII Lilt w-Yn I Plan Field nstallation certificate. CF -4R. ct Leakage. Target leakage is calculated and documented on mno EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Paoe:7 of 12 1 Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approac:i used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checUst is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE - permit application documentation. N/A DESIGNER MENT Building Envelope Measures § 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ ❑X ❑ § 150(b): Loose fill insulation manufacturer's labeled R -Value: ❑ ❑ ❑ f§ 150(.): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not ❑ ❑X ❑ apply to exterior mass walls). ❑ ❑ ❑ § 150(d): Minimum R-13 raised floor insulation in framed Floors or equivalent U -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 1. Masonry and factory -built fireplaces have: 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: a. closable metal or glass door covering the entire opening of the firebox ❑ ❑X ❑ length of recirculating sections of hot water pipes shall be insulated to Table 150B. b. outside air intake with damper and control, flue damper and control ❑ ❑X ❑ ❑ 2. No continuous burning gas pilot lights allowed. ❑ ❑ ❑ § 150(0: Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ ❑ permeance rate no greater than 2.0 perm/inch. ❑ entirely in conditioned space. § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include El ❑ El ❑ Form: EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ ❑ ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain Coefficient (SHGC), and infiltration certification. ❑ ❑X ❑ 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ ❑ ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ❑ ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ OR ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑X ❑ § 1500): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation ❑ ❑ ❑ having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ ❑ ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire ❑ ❑X ❑ length of recirculating sections of hot water pipes shall be insulated to Table 150B. 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and ❑ ❑ ❑ indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, ❑ ❑ ❑ and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Page:8 of 12 Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (•) below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - applicable. NIA DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑ ❑ 605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ X❑ ❑ sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ❑ ❑ support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause § 118 (i): Cool Roof material meets specified criteria ❑ ❑ ❑ reductions in the cross-sectional area of the ducts. § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ © ❑ 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ X❑ ❑ duct tapes unless such tape is used in combination with mastic and draw bands. ❑ ❑ ❑ luminaire has factory installed HID ballast. 4. Exhaust fan systems have back draft or automatic dampers. ❑ FXI ❑ 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ ❑ ❑ dampers. § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ ❑ ❑ 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ ❑ ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water ❑ X ❑ F1 certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. retardant and provides shielding from solar radiation that can cause degradation of the material. ❑ X❑ ❑ same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 7. Flexible ducts cannot have porous inner cores. ❑ ❑ ❑ § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ ❑ ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. 2. System is installed with: a. At least 36" of pipe between filter and heater for future solar heating. ❑ ❑ ❑ b. Cover for outdoor pools or outdoor spas. ❑ ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ❑ ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria ❑ ❑ ❑ Lighting Measures § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ © ❑ 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)l: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ ❑ ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ X❑ ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ ❑ ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ ❑ ❑ controlled by an occupant sensor that complies with Section 1' 9(d) that does not turn on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are ❑ X ❑ F1 certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ X❑ ❑ same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Page:9 of 12 Residential Kitchen Liqhtinq Worksheet WS -5R Andrew Landis 1/10/2007 Project Title Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. Luminaire Type High Efficacy? Wafts High Efficacy Quantity Watts Other Watts 2 42w Com act Fluorescent Trip/Quad 4 in Yes X No F 94.0 x 5 1 470 or Recessed Incandescent Yes I No IX 40.0 x 2 or 80 60w Recessed Incandescent Yes I No IX 60.0 x 1 = or 60 Yes I No I x = or Yes I No I x = or Yes I No I x = or Yes I No I x = or Yes I No I x = or Yes I No I x = or Yes I No x = or Yes I No x = or Yes I No x = or Yes I No x = or Yes I No x = or Yes I No x = or Yes I No Ix = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Total A: 470 B: 140 COMPLIES IF A;-,, B YES ® NO ❑ EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Paae:10 of 12 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Andrew Landis 1/10/2007 SYSTEM NAME FLOOR AREA HVAC System 3,627 ENGINEERING CHECKS IISYSTEM LOAD Number of Systems 3 Heating System Output per System 56,000 Total Output (Btuh) 168,000 Output (Btuh/sgft) 46.3 Cooling System Output per System 47,500 Total Output (Btuh) 142,500 Total Output (Tons) 11.9 Total Output (Btuh/sgft) 39.3 Total Output (sgft/Ton) 305.4 Air System CFM per System 1,545 Airflow (cfm) 4,635 Airflow (cfm/sgft) 1.28 Airflow (cfm/Ton) 390.3 Outside Air (%) 0.0 Outside Air (cfm/sgft) 0.00 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM ISensiblel Latent CFM I Sensible 2,000 40,438 5,618 1,003 35,416 0 3,430 2,164 0 0 0 0 0 0 0 0 0 3,4301 2,164 47,298F---57618 39 744 Bryant 556AN048-B/350MAV048060 100,563 26,140 168,000 Total Adjusted System Output 100,563 26,140 168,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm I Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 69.6 OF 69.6 OF 103.6 OF O Supply Air Ducts Outside Air 0 cfm 103.2 of Supply Fan Heating Coil 4635 cfm ROOMS 69.6 of 70.0 of Return Air Ducts I DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 111.0 / 77.6 of 78.7 / 64.7 of 78.7 / 64.7 of 58.3 / 57.2 of O Supply Air Ducts Outside Air 0 cfm Supply Fan Cooling Coil 59.0 / 57.4 of 4635 cfm 43.3% R.H. I ROOMS 78.7/64.7 F 0 78.0 / 64.5 of Return Air Ducts I EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 4532 Page: 11 of 12 1 ROOM LOAD SUMMARY PROJECT NAME Andrew Landis DATE 1/10/2007 SYSTEM NAME HVAC System FLOOR AREA 3,627 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE 1st Floor 1st Floor 1 1,568 31,692 4,359 1,568 31,692 4,359 835 29,483 2nd Floor 2nd Floor 1 433 8,746 1,259 433 8,746 1,259 168 5,934 PAGE TOTAL 1 2,000 40,438 5,618 1,003 35,416 TOTAL 1 2,000 40,438 5,618 1,003 35,416 EnergyPro By EnergySoft User Number: User Job Number: 4532 Page: 12 of 12