Loading...
14-0335 (AR)Applicant: Contractor: KELLNER JEFFREY P.O. BOX 245 RANCHO MARAGE, CA 92270 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 {commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class:— License No.: Date: —� Co 01 _ OWNER-Bd9JI'D CLARATION I hereby affirm under penalty of perj �at I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he orishe is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($S00).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_)1, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). �) I am exempt under Sec. . B.&P.C. for this reason Date Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Add (760)774-5333 Llc. No.: WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by -Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. _ I have and will maintain workers' compensation insurance, as required by 5action 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrierx_PoIicy Number-�!&q,76-,7-7—Y _ I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with those provisions. n A. , a Date — —1 Applic, _ D WARNING: FAILURE TO SECURE MPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES., APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city o ter upon the above- mentioned pr e". for inspection purposes. Date�Signature (Applicant or Agent), 78495 VOICE (760) 777-7125 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 D FAX (760) 777-7011 COMMUNITY DEVELOPMENT DEPARTMENT INSPECTIONS (760) 777-7153 BUILDING PERMIT Date: 7/3/2014 Application Number: AR -14-335 Owner: Property Address: 60855 FIRE BARREL DR NARVER MIKE APN: 764280999 60855 FIRE BARREL Application Description: 207SF CASITA ADDITION LA QUINTA, CA 92253 Property Zoning: Application Valuation: $16,725.60 Applicant: Contractor: KELLNER JEFFREY P.O. BOX 245 RANCHO MARAGE, CA 92270 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 {commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class:— License No.: Date: —� Co 01 _ OWNER-Bd9JI'D CLARATION I hereby affirm under penalty of perj �at I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he orishe is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($S00).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_)1, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). �) I am exempt under Sec. . B.&P.C. for this reason Date Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Add (760)774-5333 Llc. No.: WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by -Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. _ I have and will maintain workers' compensation insurance, as required by 5action 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrierx_PoIicy Number-�!&q,76-,7-7—Y _ I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith comply with those provisions. n A. , a Date — —1 Applic, _ D WARNING: FAILURE TO SECURE MPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES., APPLICANT ACKNOWLEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city o ter upon the above- mentioned pr e". for inspection purposes. Date�Signature (Applicant or Agent), DESCRIPTION FINANCIAL • /. ACCOUNT QTY AMOUNT PAID PAID DATE ADDITION, EA ADDITIONAL 500 SF *NONE* 0 $61.49 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE ADDITION, EA ADDITIONAL 500 SF PC *NONE* 0 $17.16 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE ADDITION, FIRST 100 SF *NONE* 0 $120.12 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE ADDITION, FIRST 100 SF PC *NONE* 0 $168.74 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forADDITION: $367.51 $0.00 DESCRIPTION A000.UNT QTY AMOUNT PAID PAID DATE BSAS SB1473 FEE 101-0000-20306 0 $1.00 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forBUILDING STANDARDS ADMINISTRATION BSA: $1.00 $0.00 DESCRIPTION -ACCOUNT %,QTY ",AMOUNT','- T PAID DATE FIXTURES, FIRST 20 101-0000-42403 1 $23.83 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT ". QTY AMOUNT PAID PAID DATE FIXTURES, FIRST 20 PC 101-0000-42403 1 $23.83 $0.00 PAID BY s- p METHOD. ,, RECEIPT #- CHECK # CLTD BY Total Paid forELECTRICAL: $47.66 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID ; PAID DATE HOURLY PLAN CHECK 10160003428200 $175.00 PAID BY . 'METHOD RECEIPT#`. , CHECK# � " CLTD`BY' Total Paid forHOURLY PLAN CHECK: $175.00 DESCRIPTION ACCOUNT QTY ,'"°" AMOUNT• PAID _ 'PAID DATE APPLIANCE REPAIR/ALTERATION 101-0000-42402 0 $11.92 $0.00 - PAID BY 'METHOD r'., "^`.RECEIPT #` CHECK # CLTD BY,- DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE APPLIANCE REPAIR/ALTERATION PC 101-0000-42402 0 $4.77 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE CONDENSER/COMPRESSOR 101-0000-42402 0 $35.75 $0.00 PAID BY METHOD, RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID" PAID DATE CONDENSER/COMPRESSOR PC 101-0000-42402 0 $23.83 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION 'ACCOUNT QTY AMOUNT PAID PAID DATE FURNACE 101-0000-42402 0 $35.75 $0.00 PAID BY METHOD RECEIPT #' CHECK # CLTD BY DESCRIPTION ACCOUNT' QTY AMOUNT PAID PAID DATE FURNACE PC 101-0000-42402 0 $23.83 $0.00 PAID BY .METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE VENT FAN 101-0000-42402 0 $11.92 $0.00 PAID BY METHOD' RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT QTY AMOUNT . PAID PAID DATE VENT FAN PC 101-0000-42402 0 $4.77 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY Total Paid forMECHANICAL: $152.54 $0.00 DESCRIPTION ACCOUNT QTY AMOUNT PAID PAID DATE FIXTURE/TRAP 101-0000-42401 0 $35.76 $0.00 PAID BY METHOD RECEIPT # CHECK # CLTD BY DESCRIPTION ACCOUNT - QTY ' ' AMOUNT PAID PAID DATE FIXTURE/TRAP PC 101-0000-42401 0 $35.76 $0.00 PAID BY METHOD RECEIPT # " CHECK # CLTD BY. DESCRIPTION : t 'ACCOUNT ,AMOUNT PAID; PAID DATE GAS SYSTEM, 1-4 OUTLETS 101-0000-42401 0 $11.92 $0.00 PAID BY ;' . " ` 'METHOD'� ' RECEIPT # CHECK # CLTD BY , DESCRIPTION AGCOUNT �.' , ; 'QTY AMOUNT, PAID PAID DATE GAS SYSTEM, 1-4 OUTLETS PC 101-0000-42401 0 $23.83 $0.00 PAID BY - _ - ;`R ,"METHOD'° RECEIPT # + CHECK # CLTD BY DESCRIPTION ACCOUNTCITY }c::' ` AMOUNT PAID PAID DATE WATER SYSTEM INST/ALT/REP 101-0000-42401 0 $11.92 $0.00 PAID BY, +. ,:..;�a' „ �: METHOD '.X ,, � , :RECEIPT # r , CHECK # CLTD BY. .DESCRIPTION -} ''` •ACCOUNT" w sQTY _y AMOUNT PAID "PAID DATE WATER SYSTEM INST/ALT/REP PC 101-0000-42401 0 $11.92 $0.00 PAID,BY' ' METHOD RECEIPTX' ' CHECK # a CLTD BY Total Paid forPLUMBING FEES: $131:11 $0.00 DESCRIPTION' ,' " i ACCOUNT w . IQTY ,k AMOUNT PAID PAID DATE SMI - RESIDENTIAL 101-0000-20308 0 $1.67 $0.00 PAID �NIETHOD I a RECEIPTS#,L' .• CHECK # _ CLTD BY Total Paid forSTRONG MOTION INSTRUMENTATION SMI: $1.67 $0.00 TOTALS:•0 Bin # `p City of La Quinta Building &r Safety Division Permit # P.O. Box 1504, 78-495 Calle Tampico b Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Project Address: Owner's Name: AA kC Q J A?P. Number: 74-Y— Z d— 0 Z C 7i Address: 6D q 7 r1 G 6A tL1 P - 4— L l Legal Description: City, ST, Zip: %z, 63 ' Coutract r. �C Telephone: <i;sw Address:sm Project Description: City, ST, Zip: �Q*c/4d 0-25, State Lic. # : Sys !a J City Lie. #; Arch., Engr., Designer: NO a Address: f Ls City, ST, Zip: Telephone: <:: z:::;>>:;::<;z»: <:::>::z:: Construction Type: Occupancy: State Lic. type ) Project a circle one): New Add'n Alter Repair Demo :::.....,. J Name of Contact Person: IV\ I KG A 12, V E tL < r Sq. Ft.:2 O # Stories: # Units: Telephone # of Contact Person: i J Estimated Value of Project `j Q , O 0.0 APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Rec'd TRACKING • PERMIT FEES Plan Sets Plan Check submitted 11118 Item Amount Structural Calcs. Reviewed, ready fr corrections Plan Check Deposit Truss Cales. Called Contact Person Plan Check Balance. Title 24 Cates. Pians picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2°" Review, ready for correctis/issue Electrical Subcontactor List Called Contact Person 2—Plumb g �� U Grant Deed Plans picked up i 1� , S. .1. H.O.A. Approval Plans resubmitted / 5 ading Com 24 C O IN HOUSE:- '"' Review, ready for correction rissue Developer Impact Fee Planning Approval Called Contact Person2 A.I.P.P. O Q N Pub. Wks. Appr Date of permit issue School Fees (' &;MC, fe Total Perini es 2.91L( Qa aojjL - : 4 1 U 1 141 �?� Z I ��lU yau�tg aw - / q - 4 Opp 411,e ([ SP - �., aachella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 This Box For District Use Only DEVELOPER FEES PAID AREA: AMOUNT LEVEL ONE AMOUNT: - LEVEL TWO AMOUNT: MITIGATION AMOUNT: COMM/MD. AMOUNT: DATE: RECEIPT: CHECK#: MITIALS CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Name: rtrt g Date: May 8, 2014 Owner's Name: ' Mike Narver Phone No. Project Address: 60-855 Fire Barrel, LaQuinta Project Description: . Attached Casita APN: 764-520-022 Tract #: Lot #'s: Type of Development: Residential XX1 Commercial Industrial Total Square Feet of Building Area: 207 Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: May 8, 2014 Signature: SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code Gov. Code Project Agreement Existing Not Subject to Fee 17620 65995 Approval Prior to 1/1/87. Requirement Note: Number of Sq.Ft. 207 Pursuant to AB 181 any room additions or enclosures of 500 sq. ft. or less are exempt from developer fees. Any mobile Amount per Sq.Ft. $0.00 homes being relocated within the same school district's Amount Collected $0.00 jurisdiction are exempt from developer fees. Building Permit Application Completed: Yes/No By: Elsa F. Esqueda, Director of Facilities and Maintenance w C j G n Certificate issued by: Laurie Howard, Secretary Signature: NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEMENT OF FEES Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of *uancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. n fti bG''" ed ga ,fo, r good cause, as determined by the School District, and up to three (3) such extensions may be granted. E� ®L K MV:c/mydoctildevfees/ceitilicate of compliance form updated 3-2007 ® v 11/2010 MAY 0 8 201 CITY OF LA QUANTA IMMUNITY DEVEmomm ,- G u�i�cv Building & Safety Department 78-495 Calle Tampico PO Box 1504 La Quinta, CA 92253 (760) 777-7012 voice — (760) 777-7011 fax To: Greg Butler, Building Official To PD: APRIL 10, 2014 From: Les Johnson, CDD Director Due date: APRIL 17, 2014 Permit # 14-0335 Status: 1ST REVIEW Building Plans Approval (This is an approval to issue a Building Permit) The Planning Division has reviewed the Building Plans for the following project: Description:. ATTACHED CASITA /PER JJ Address or general location: 60855 FIREBARREL Applicant Contact:MIKE NARVGER 503-538-6567 The Planning Division finds that: ❑ ...these Building Plans do not require Planning Division approval. . ...these Building Plans are approved by the Planning Division. ❑ ...these Building Plans require corrections. Please forward a copy of the attached corrections to the applicant. When the corrections are made please return them to the Planning Division for review. Les Johnson, Community Development Director �'ar Date Note: PLEASE RETURN PLANS WITH GREENSHEET TO THE BUILDING DIVISION. Trilogy at La Quinta 60-750 Trilogy Pkwy La Quinta, CA 92253 Ph: 760-777-6059 Fax: 760-777-1620 Friday, may ,14 Michael E. Narver / Pennie L Narver 21035 NE Sunnycrest Rd Newberg OR 97132 RE: Architectural Modification Conditionally Approved 60855 Fire Barrel Dr / Customer ID #: TRLAQ-0755-01 Dear Michael E. Narver / Pennie L Narver: Trilogy Irilogy at Lo Quinta Maintenance association We are pleased to inform you that your plans were Conditionally Approved, on May 1, 2014 by the Design Review Committee. Please ensure that you comply with the conditions noted below: See Conditions of Approval 7, 8, 9, 13, 19 and 23. The landscape plan is required before construction begins. (1) The Committee approves plans and specifications based on aesthetics and compliance with the community guidelines. They do not review for engineering design or structural integrity. Zoning and building permits are the responsibility of the homeowner. (2) The Committee has the right to inspect improvements, constructed or being constructed, to determine that such improvements have been or are being built in compliance with the plans and specifications approved. Thank you for your patience and cooperation. If you have any questions, please refer to your Community Policies or contact me at 760-777-6059 or at mima.hemandez@fsresidential.com. Thank you. Sincerely, Mirna Hernandez Asst Manager On -Site Property TRILOGY AT LA QUINTA Nceo-fd CONDITIONS OF APPROVAL Property Address: ��'>✓&Cdk—t Date Reviewed: Corhditions Your plans have been approved, provided drat you meet die items checked below and all .work is consistent with the of Approval Design Guidelines. The patio cover material mist be Alumna wood or other similar wood like construction. Rooting materials shall 1 match die roof material of die dwelling or be open wood lattice 'llhe color ot the patio cover matches Uie home s stucco, accent, ascia or white. 3 Any patio cover or awning to be installed and attached to the lhonhe must be installed Ili such a manner that it does not compromise die integrity of the water permeability of die home. Due to die patio covers size it must be constructed with variable heights or must be constructed ill two sections 4 with a separation inn between 5 The size of the patio cover is limited to the size of the proposed patio slab. The proposed retractable awning may not be a striped awning. It must be a neutral color dhat blends with die 6 lhonhe. Please submit a sample of the fabric. J7 Obtain services of a state licensed professional for consultation. J Obtain necessary building permits from the city of La Quiuta, meeting setback requirements per city code and 1 8 Inianitain die existing drainage. g Maintain positive drainage in accordance widl the Trilogy Design Guidelines (Section 3.8). 10 The screen door must be d7e color of die house stucco or be black. 11 unx ergroun c ranage is installed, the rain needs to terminate -Ili he grass swa e ane be h us with die tur and ca ed with a pop -up drain cover. Pool, spa, fountain, and air coaditioning equipment set backs must comply with City of La Quiuta codes. All 12 equipment shall be located, screened, or recessed ill a manner so as to not be viewable from ally lot. or street and die noise from die equipment attenuated for the adjacent property owners. Pool set backs are fi" for lhardscape and 18" for water line. ✓ 13 The. color of die proposed concrete is natural or a neutral tone. Rear yard may not exceed 70% lhardscape and must have a minimum of 3096 softscape, measured from die rear 14 building face of wall to die side property lines: Proposed planting meets widl the Trilogy Rear Yard Minimum Planting Requirements standards and all plants 15 are included oil die Revised Approved Plant List contained in the Design Guidetihhes. The proposed wall or iron work to match the existing developer retaining wall ill material, style annd color or shall 16 be die Frazee Paint color specified in the guidelines. Replace block wall per- Shea Homes standard block wall specification, if removing any portion of block wall to 17 gain access to rear or side yard (requires inspection of rebar: before cap is installed). 18 Refer to. Exhibit "F' uh die Design Guidelines. (Block Wall Desighi). x 19 lWhen work is completed, please submit Notice of Completion form attached. 20 Make sure rear yard property Bile pins (markers) remain during construction (applies to golf course lots only) 21 All contractors must meet the Association representative prior to commencing construction. 22 Resubmit showing drainage flow/plans. 23 See notes on plans (if any) 24 Ani independent irrigation controller must be used for die rear yard, it cannot be tied into the front yard. Notesl - L-,4,0 0 �GhPG R—AO Q�aUV P�t� C� GFo�£ STA pT C) cel-��T2uL�to� . HAASSOCIATIONS%Trlboa al La OuinfalARCHiTECTURALORC Forms%ConAitinne of Aoorovnf .t t BUILDING ENERGY ANALYSIS REPORT PROJECT:- NARVER's Residence 60855 Fire Barrel Dr. - A.P.N.: 764-520-022 La Quinta, Ca 92253 Project Designer: Mike Narver 60855 Fire Barrel Dr. La Quinta, Ca 92253 Report Prepared by: Santiago Lopez-Ocampo P.O. Box 1018 La Quinta, Ca 92247 760.485.8927 Job Number: LQ031814 Date: 5/8/2014 The EnergyPro computer program has been used to perform the calculations summarized in authorized by the California Energy Commission for use with both the Residential and Nor This program developed by EnergySoft, LLC — www EneravPro 5.1 by EnerovSoff User Number: 5732 Run Code: 2014-05-08T0&F R E C" E I %VE D' MAY ® 8.21914 C1Y OF LA Qi9l.NT iergysoft(coM. ROVED RQ 1. T w r^Tinl 9 ID: LQ031814 DATE ((*— g is PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name NARVER's Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family la Existing+ Addition/Alteration Date 5/8/2014 Project Address 60855 Fire Barrel Dr. - A.P.N.: 764-520-02 California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 2,043 Addition 207 # of Stories 1 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity (ft) Features see Part 2 of 5 Status Slab Unheated Slab -on -Grade None 1,836 Perim = 0' Existing Wall Wood Framed R-13 1,179 Existing Door Opaque Door None 38 Existing Roof Wood Framed Attic R-38 1,836 Existing Slab Unheated Slab -on -Grade None 207 Perim = 0' New Wall Wood Framed R-15 427 New Door Opaque Door None 20 New Roof Wood Framed Attic R-30 207 New FENESTRATION U- Orientation Area Factor Exterior SHGC Overhang Sidefins Shades Status Right (NE) 12.0 0.340 0.30 none none Bug Screen Removed Right (NE) 82.0 0.340 0.30 none none Bug Screen Existing Right (NE) 15.0 0.390 0.37 none none Bug Screen New Rear (M 72.0 0.340 0.30 none none Bug Screen Existing Rear (tom 120.0 0.340 0.30 12.0 none Bug Screen Existing Front (E) 18.5 0.340 0.30 none none Bug Screen Removed Right (N) 8.0 0.390 0.37 none none Bug Screen New Front (E) 24.3 0.390 0.37 none none Bug Screen New HVAC SYSTEMS Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status 1 Central Furnace 78% AFUE Split Air Conditioner 12.0 SEER Setback Existing 1 Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER Setback New HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status HVAC System Ducted Ducted Attic, Ceiling Ins, vented 8.0 Existing Guest Ducted Ducted Attic, Ceiling Ins, vented 8.0 New WATER HEATING Ot . Type Gallons Min. Eff Distribution Status A 1 L;UIL-L.�IIv:A a omr c Ener Pro 5.1 by Ener Soft User Number. 5732 Run Code: 2014-05-08 70 8:25:30 t- U'l/WLQ.63.1.814 Hl)(-; 177) l"q Pa& 3 of 13 DATE BY PERFORMANCE CERTIFICATE: Residential (Part 2 of 5) CF -1 R Project Name Building Type ® Single Family ❑ Addition Alone Date NARVER's Residence ❑ Multi Family ® Existing+ Addition/Alteration 5/8/2014 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special 'ustification and documentation submitted. The Existing Furnace Default FAU/AC 2006 and Later has an AFUE less than the Vintaqe Defaults. Field verification is required. IThe HVAC System Guest must serve only Sleeping Areas. The non -closable area between zones cannot exceed 40 sf and each zone must have a I separate thermostat. In addition the air flow requirements and fan watt draw requirements in Residential Appendix RA3.3 must be met. HIGH MASS Design - Verify Thermal Mass: 207.0 ft2 Exposed Slab Floor, 4.000" thick at Addition HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF -4R form for each of the measures listed below for final to be given. CITE( OF LA 0 I �lTA BUILDING & SAFETY DEPT. FOR rQN'5;TP1 It^.-riniN ID: LQ031814 Page 4 i M DATE BY f13 PERFORMANCE CERTIFICATE: Residential I (Part 3 of 5) CF -1 R Project Name Building Type m Single Family ❑ Addition Alone Date NARVER's Residence ❑ Multi Family m Existing+ Addition/Alteration 51812014 ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/ft2- r Space Heating 6.56 6.09 0.47 Space Cooling 84.43 80.79 3.64 Fans 18.61 18.14 0.47 Domestic Hot Water 16.17 16.17 0.00 Pumps 0.00 0.00 0.00 Totals 125.77 121.19 4.58 Percent Better Than Standard: 3.6% BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (E) 90 deg Ext. Walls/Roof Wall Area Area Number of Dwelling Units: 1.00 (E) 151 24 Fuel Available at Site: Natural Gas (S) 126 0 Raised Floor Area: 0 (VV) 716 192 Slab on Grade Area: 2,043 (N) 993 105 Average Ceiling Height: 9.0 Roof 2,043 0 Fenestration Average U -Factor: 0.35 TOTAL: 321 Average SHGC: 0.31 Fenestration/CFA Ratio: 15.7% REMARKS STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and complete. Documentation Author Company Santiago Lopez-Ocampo 5/8/2014 Address P.O. Box 1018 Name City/State/ZipCity/State/Zip La Quinta, Ca 92247 Phone 760.485.8927 Signed Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application, and recognizes that compliance using duct design, duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require installer testingand rtification and field verification by an approved HERS rater. Designer or w er (per Business & Professions Code) Company Mike Narver Address 60855 Fire Barrel Dr. Name CITMme- I Ani ii NIT . City/State/Zip La Quinta, Ca 92253 Phone BUILSigAMG & SA)^PL 6-99EDYEPT. ate Ener Pro 5.1 by Ener Soft User Number: 5732 Runcode: 2014-05-0 8 708:25:30 tD: Lg03-18147 t t 11 i I Pa e 5 of 13 DATE BY CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name NARVER's Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family la Existing+ Addition/Alteration Date 5/8/2014 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Joint Appendix Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Slab 1,836 0.730 None 0 180 Existing 4.4.7-A1 Existing Wall 397 0.102 R-13 45 90 Existing 4.3.1-A3 Existin Wall 198 0.102 R-13 270 90 Existin 4.3.1-A3 Existing Wall 374 0.102 R-13 45 90 Existing 4.3.1-A3 Existing Wall 99 0.102 R-13 90 90 Removec 4.3.1-A3 Existing Wall 211 0.102 0-13 270 90 Existing 4.3.1-A3 Existing Door 20 0.500 None 270 90 Existing 4.5.1-A4 Existing Door 18 0.500 None 270 90 Existing 4.5.1-A4 Existing Roof 1,836 0.025 R-38 0 0 Existing 4.2.1-A21 Existing Slab 207 0.730 None 0 180 New 4.4.7-A1 Addition Wall 98 0.095 R-15 0 90 New 4.3.1-A4 Addition Door 20 0.500 None 0 90 New 4.5.1-A4 Addition Wall 77 0.095 R-15 270 90 New 4.3.1-A4 Addition Wall 126 0.095 R-15 180 90 New 4.3.1-A4 Addition Wall 1271 0.095 R-15 90 90 New 4.3.1-A4 lAddition Roof 2071 0.031 R-30 0 0 New 4.2.1-A20 lAddition FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGC2 Azm Status Glazing Type Location/Comments 1 Window 12.0 0.340 NFRC 0.30 NFRC 45 Removed U -Factor 0.34 SHGC 0.30 (E) Existing 2 Window 5.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 3 Window 5.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 4 Window 12.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 5 Window 15.0 0.390 NFRC 0.37 NFRC 45 New Milgard Classic Low -E Vinyl Existing 6 Window 12.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 7 Window 36.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 8 Window 12.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 9 Window 36.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 10 Window 48.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 11 Window 36.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 12 Window 20.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 13 Window 36.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 14 Window 4.0 0.340 NFRC 0.30 NFRC 45 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 15 Window 15.0 0.340 NFRC 0.30 NFRC 90 Removed U -Factor 0.34 SHGC 0.30 (E) Existing 16Window 1 3.5 0.340 NFRC 0.30 NFRC 90 Removed U -Factor 0.34 SHGC 0.30 (E) Existing (1) 1.1 -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Ove hang Left Fin Ri ht Fin Len H t LExt RExt Dist Len H t Dist Len I H t 1 Bug Screen 0.76 2 Bug Screen 0.76 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 9 Bug Screen 0.76 6.0 6.0 12.0 1.0 6.0 6.0 10 Bug Screen 0.76 8.0 6.0 12.0 1.0 6.0 6.0 11 Bug Screen 0.76 6.0 6.0 12.0 1.0 6.0 6.0 12 Bug Screen 0.76 13 Bug Screen 0.76 14 Bug Screen 0.76 r 15 Bug Screen 0.76 1-T V f"% e-* A A A Ft AT 16 Bu Screen 0.76 OUIL_L)IINJU & 6AF-ETY DEPT. Ener Pro 5.1 by Ener Soft User Number: 5732 RunCode: 2014-05-08T08:25:30 ;14:'LQ031844 ,;, r ". ' "` Page 6 • f 13 DATE __ By CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R Project Name NARVER's Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family m Existing+ Addition/Alteration Date 5/8/2014 OPAQUE SURFACE DETAILS Surface U- Insulation Joint Appendix Type Area Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments FENESTRATION SURFACE DETAILS ID Type Area U -Factor SHGC Azm Status Glazing Type Location/Comments 17 Window 12.0 0.340 NFRC 0.30 NFRC 270 Existing U -Factor 0.34 SHGC 0.30 (E) Existing 18 Window 8.0 0.390 NFRC 0.37 NFRC 0 New Milgard Classic Low -E Vinyl Addition 19 Window 18.0 0.390 NFRC 0.37 NFRC 90 New Milgard Classic Low -E Vinyl Addition 20 Window 6.3 0.390 NFRC 0.37 NFRC 90 New Milgard Classic Low -E Vinyl Addition (1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS Window ID Exterior Shade Type SHGC Hot Wd Ove hang Left Fin Right Fin Len H t LExt RExt Dist Len H t Dist Len H t 17 Bug Screen 0.76 18 Bug Screen 0.76 19 Bug Screen 0.76 20 Bug Screen 0.76 .-i 1 N bDILDING & SAFETY DEPT. AR"' Ene Pro 5.1 6 Ener Soft User Number 5732 Run Code: 2014-05-08708:25:30 I ID:,L.Q0318.1_4 `Ys' E B Pa e 7 0 13 -- , vviv0 o r-fUl, I JUN DATE BY CERTIFICATE OF COMPLIANCE: Residential Part 5 of 5 CF -1 R Project Name NARVER's Residence Building Type D Single Family ❑ Addition Alone ❑ Multi Family p Existing+ Addition/Alteration Date 5/8/2014 BUILDING ZONE INFORMATION System Name Zone Name Floor Area ft New Existing Altered Removed Volume Year Built HVAC System Existing 1,836 16,524 2006 Guest Addition 207 1,863 Totals 1 2071 1,8361 0 01 1 HVAC SYSTEMS System Name Qty. Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type. Status HVAC System 1 Central Furnace 78% AFUE Split Air Conditioner 12.0 SEER Setback Existing Guest 1 Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER Setback New HVAC DISTRIBUTION System Name Heating Duct Ducts Cooling Duct Location R -Value Tested? Status HVAC System Ducted Ducted Attic, Ceiling Ins, vented 8.0 ❑ Existing Guest Ducted Ducted Attic, Ceiling Ins, vented 8.0 ❑ New ❑ WATER HEATING SYSTEMS S stem Name at . Tvpe Distribution Rated Input Btuh Tank Cap. al Energy Factor or RE Standby Loss or Pilot Ext. Tank Insul. R- Value Status Standard Gas 50 gal or Le 1 Small Gas Kitchen Pipe Ins 40,000 50 0.58 n/a n/a Existing MULTI -FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control Hot Water Piping Length (ft)o C0 Q — System Name Pipe Length Pipe Diameter Insul. Thick. Ot . HP Plenum Outside Buried ❑ _ 13 ❑ I eaF g Y UF LA T-JUINT-A I ❑ BUILDING & .qar-=-v nrr� - ❑ yyy1 y A M A 3 Ayr --%y tv J' P� I y1 yr Ener Pro 5.1 by Ener Soft User Number: 5732 RunCode: 2014-05-08T08:25:301 1 : L-Q039.8941VJI H L a e 8 0 13 DATE ___ 8Y MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R Project Name Date NARVER's Residence 5/8/2014 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF - 1 R -ALT Form) shall supersede the items marked with an asterisk (') below. This Mandatory Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R Form with plans. Building Envelope Measures: 116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified LI -Factor, certified Solar Heat Gain Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form. §118(i): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(1) when the installation of a Cool Roof is specified on the CF -1 R Form. *§1 50 a : Minimum R-19 insulation in wood -frame ceiling orequivalent Ll -factor. §150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value. *§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent Ll -factor. *§1 50 d : Minimum R-13 insulation in raised wood -frame floor orequivalent Ll -factor. 150(f): Air retarding wrap is tested labeled, and installed according to ASTM E1677-95 2000 when specified on the CF -1 R Form. §150(g): Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 e 1 A: Mason or factory -built fireplaces have a closable metal or lass door coveringthe entire opening of the firebox. §150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and ti ht -f itting damper and or a combustion -air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5. §115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. 150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA. §150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c). §150(j)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §150(j)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. §150(j)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of recirculating sections of hot water pipes are insulated per Standards Table 150-13. §150(j)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. §150(j)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table 123-A. 150(i)3A: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. §150(j)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant-or=is=enclosed-entirely-in conditioned space. i CITY Y n I= I A X i I I N t A w Y v I 150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Ratinq and C;ertificatio,nlCor ,oration,, APPROVED EnergyPro 5.1 by EnergySoft User Number.' 5732 Run Code: 2014-05-08708:25:30 1 ID LQb3,1.814 t h��' I I age 9 of 13 DATE E3y MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date NARVER's Residence 5/8/2014 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. 150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. §150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water,retardant and provides shielding from solar radiation that can cause degradation of the material. §150(m)10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and Spa Heating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating ora pilot light. §114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. 150 : Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150 Residential Lighting Measures: §150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2. 150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. 150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k). 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. §150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. — CITY ®F LA QUINTA BUILDING & SAFETY DEPT. AP PROVED EnergyPro 5.1 by EnergySoft User Number: 5732 RunCode: 2014-05-08T08:25:301 FID RQC0.3zo.8s R G I I r age 10 f 13 DATE BY—] MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF-1 R Project Name Date NARVER's Residence 5/8/2014 §150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual-on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a manual-on occupancy sensor. §150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual- on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less than 1000 square feet located on a residential site is not required to comply with §150 k 11. §150(k)l2: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptionl to §150(k)l3 may be controlled by a temporary override switch which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not be hi h efficacy luminaires. §150(k)l4: Internally illuminated address signs shall comply with Section 148; OR not contain a screw-base socket, and consume no more than five watts of power as determined according to §130(d). §150(k)15: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130, 131, 134, and 146. §150(k)16: Permanently installed lighting in the enclosed, non-dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119. CITY OF IA. QUINTA BUILDING & SAFETY DEPT. A PNROVED FOR CONSTRUCTION EnergyPro 5.1 by EnergySoft User Number: 5732 RunCode: 201405-08708:25:30 ' ID: LQ031814 Page 11 of 3 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name NARVER's Residence Date 5/8/2014 System Name HVAC System Floor Area 1,836 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation F Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL CFM 1,367 0 COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per System 0 26,786 2,674 451 17,350 Total Output Btuh 0 0 Output Stuh/s tt 0.0 1,546 853 Cooling System 0 0 Output per System 1 0 0 0 0 Total Output Btuh 1 0 2,674 0 Total Output ons 0.0 1,5461 853 Total Output Btuh/s tt 0.0 Total Output s tt/Ton 22,032,000.0 1 29,878 19,056 Air System CFM per System 0 HVAC EQUIPMENT SELECTION Airflow cfm 0 Default FAU/AC 2006 and Later 1 0 0 Airflow cfm/s ft 0.00 Airflow cfm/Ton 0.0 Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 1 0 0 Aug 3 PM Jan 1 AM Outside Air % 0.0% Outside Air cfm/s tt 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF Outside Air 0 cfm 67 OF 67 OF 105 OF Heating Coil Ut –J-- ---- �- 104 OF ROOM in IL 68 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112 / 78 OF Outside AirA r 0 cfm 77 / 63 °F 77163 IF 55 / 54 OF Cooling Coil _ _ � � 1 7'� �f 1 i 494 BUILDING �5 / 62 °F FOR CONSTRUCTIO } EnergyPro 5.1 by EnergySoff User Number: 5732 RunCode: 2014-05-08708:25:30 I ID: LQ031814 Pa _12 f 13 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name NARVER's Residence Date 5/8/2014 System Name Guest Floor Area 207 ENGINEERING CHECKS SYSTEM LOAD Number of Systems. 1 COIL CFM ' Total Room Loads 174 Return Vented Lighting Return Air Ducts Return Fan Ventilation 0 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per S stem 32,000 3,662 405 88 3,459 Total Output Btuh 32,000 0 Output Btuh/s ft 154.6 211 170 Cooling System 0 0 Output per System 23,200 0 0 0 0 Total Output Btuh 23,200 0 1 211 4,084T--405] 0 Total Output Tons 1.9 170 Total Output Btuh/s ft 112.1 Total Output s ft/Ton 107.1 3,799 Air System CFM per System 800 HVAC EQUIPMENT SELECTION Airflow cfm 800 YorkCZB24.PS8Al2N40.800cfm 16,818 2,726 32,000 Airflow cfm/s ft 3.86 Airflow cfm/Ton 413.8 Outside Air % 0.0% Total Adjusted System Output (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 16,818 2,726 32,000 Aug 3 PM Jan 1 AM Outside Air cfm/s ft 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26 OF 68 IF Outside Air 0 cfm Supply Fan 800 cfm 68 OF 68 OF 105 OF — - Heating Coil _ 105 OF ROOM 68 OF COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 75/62°F Outside Air 0 cfm 75 / 62 OF 75/62°F 55/54°F r Supply I Fan Cooling Coil 800 cfm 1 46.7% 55 / 54 OF ROOM 75 / 62 OF EnergyPro 5.1 by EnergySoft User Number: 5732 RunCode: 2014-05.08708:25:30 ID: LQ031814 Page 13 of 13 JCM Inspections 39725 Garand Lane Suite F Palm Desert, CA 92211 INSPECTIONS Phone: 760-345-5554 - Fax: 760-772-3895 INSPECTIONS COMPRESSION STRENGTH TEST RESULTS Client: Shea La Quinta, LLC Date: 11127106 Project: Trilogy @ La Quinta - Shea Homes Project No: 02-1109 60-800 Triolgy Parkway La Quinta, CA 92253 Set ID Structure Age of Test Compression Strength JCM ID Locadon Date Cast Cylinder ID (days) (psi) Set A Phase 15C - Lot # 5059 Slab on Grade 6-30-06 Concrete 273-786 Great Room Required psi: 4000 4097 7 3600 4098 28 5070 4099 28 5030 CERTIFIED: Page 1 of 1 JCM Inspections supplies the service of compression strength test results only. Per ASTMC39 JCM Inspections l - 39725 Garand Lane Suite F j Palm Desert, CA 92211 Phone: 760-345-5554 - Fax: 760-772-3895 REINFORCED CONCRETE INSPECTION REPORT Dates: Noted Below Project Name: Project No: Trilogy @ La Quinta - Shea Homes 02-1109 Project Address: City: �✓ IBC 60-800 Triolgy Parkway La Quinta, CA Title 24 Client: Sub -Contractor: Shea La Quinta, LLC DCCCC Other: General Contractor: Architect: Structural Engineer: Shea Homes for Active Adults Bassenian Lagoni Borm & Associates, Inc./ Suncoast Post Tensi Slump (inches): �� - == Supplier: Superior Weather: Time Sampled: ° ` �'� ` Mix Design: D83625P Time in Mixer (min,): Specified Strength (PSI): 4000 Unresolved Items: Water Added @ Jobsite (gals.): t' Addmixture: POZZ 322N ,' `; " ., Concrete Temperature (F): - Truck #: ' Ticket #: ❑ None Ambient Air Temperature (F): Field ID Marking: Set A - 4 cylinders ❑see Below Location of Sample:- ❑ No samples Taken Description of Work Inspected: Phase Lot# _ ' -� Product Plan -' 9 z. 1) Received mill certifications for rebar and tendons placed. 2) Typical exterior Footings including Garage Footings/Door (11,12,13/SD-1), Tie Beams (20/SD-1), Typical Interior Footings/Rib including step (15,18/SD-1), Seven Strand Tendons (4,10,12,13,16/SD-1), Simpson Strong Walls (24/SD-1), Anchor Bolts and Holdowns (6,7,8/SD-1), Pad Footings and additional rebar placed as per these details and as noted on'e� Also, typical details 2, 3/SD-1 and Notes on SN -1 apply. Checked rebar for grade, size, placement, coverage and splices. Rebar and tendons were securely tied and supported off the earth. Accepted for concrete placement. 1) The placement of concrete for areas noted above except Garage Interior Footing and Slab on Grade. Total cubic yards placed: approx ; A mechanical vibrator was used to consolidate the concrete. Approved #4 rebar slab dowels were placed @ 18" o.c. 2) Molded 4 cylinders for compression tests with breaks at 7 days (1), 28 days (2) and one for holding purposes. 1) The placement of concrete for Garage Interior Footings and Slab on Grade Total cubic yards placed: approx - Verified correct mix design. I hereby certify that I have inspected all of the above work, unless otherwise noted, and to the best of my ability I have found this work to comply with the approved plans, specifications. applicable building laws. Final report issued at project completion. Inspector: Jack C. Millin ICC Certification No: 0842216-80 Contractor's Representative: Copy 1 JCM Inspections Copy 2 Project Superintendent Copy 3 Governing Agency Page All DE" 'JCM Inspections 39725-Garand Lane Suite F Palm Desert, CA 92211 - R=M=A INSPECTIONS Phone: 760-345-5554 - Fax: 760-772-3895 INSPECTION S PRESTRESSED CONCRETE INSPECTION REPORT Date: _1,4_,)(n Project Name: Project No: Trilogy @ La Quinta - Shea Homes 02-1109 Project Address: City: 60-800 Triolgy Parkway La Quinta, CA Client: fJ Sub -Contractor: Shea La Quinta, LLC Sun Coast Tensioning General Contractor: Architect: Structural Engineer: Shea Homes for Active Adults Bassenian Lagoni Borm & Associates, Inc./ Suncoast Post Tensi Size and Type of Tendons: 1/2" Diameter Seven Strand Stress -Relieved Tendons ❑✓ IBC ❑ Title 24 Jack Machine Calibration: Received Sheet from Sun Coast -Gage Pressure in psi to Machine Load in kips Other: Hoo psi to 33.04 kips/33,000 lbs ' ' Unresolved Items: Calibration Date: Machine # S None Phase ,rte C Lot#0 Product 1. Plan t4a in c o Fi c •e a c c �4 ❑See Below Description of Work Inspected: Actual Elongation (in) Specified Complies within 7% +/- of specified elongation. Lot # Location Tendons Elongation (in) Reference 11h/SN2. '- •("^-Or--1 1. Yes No w ❑ IN 0 C, n Si 4 _ E�I El❑ e 'NJ ❑ W ` ❑ , e, -10'C M ck, R. X Q L4 � ❑ ❑ ❑ ❑ ❑ ❑ ❑ I hereby certify that I have inspected all of the above work, unless otherwise noted, and to the best of my ability I have found this work to comply with the approved plans, specifications _applicable building laws. Final report issued at project completion. Inspector: Jack C. Millin ICC Certification No: 0842216-89 Contractor's Representative: Copy 1 JCM Inspections Copy 2 Project Superintendent Copy 3 Governing Agency Page ___Aof