11-0428 (AR)P.O. BOX 1504 .4 VOICE (760) 777-7012
78-495 CALLE TAMPICO' FAX (760) 777-7011
LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760).777-7153
BUILDING PERMIT
Date: 8/25/11
Application Number: 11-00000428 Owner:
Property Address: 48680 FULL vMOON WY KAREN L GIORGI
APN: 623-470-015- - - 455 VISTA GRANDE
Application description: ADDITION - RESIDENTIAL GREENBRAE, CA 94904
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 25000
Contractor:
Applicant: Architect or Engineer: HIGGINS & LOVETT FIELD SERVI ,
399 TAYLOR BLVD, STE #222
PLEASANT HILL, CA 945231
` (925)849-4886 �) j
/� I Lic. No.: 900757 i-tlUO r✓ •a
Clyy_ OW j.;4 Q.UjRNTA
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
Licen a Class: B, C54 , Cl Li N 9 7
Date:A �"'� ntractor: -
OWNER -BUILDER DECLARATION '
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
(_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.)..
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
(_ ) I am exempt under Sec. B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name: I If
Lender's Address: P1 A
LQPERMIT
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier TRVL INS Policy Number WCCO1615800
_ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should become subject to the workers' compensation provisions of Section
t� x-3700 of the Labor Code, I shall forthwith comply with those provisions.
Date.
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS 1$100,0001• IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is.hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1 . Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or.pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is correct. I agree to comply with all
city and county ordinances and state laws relating to building construction, and hereby authorize representatives
of 3AIS county to enter upon a above-mentioned property for inspection purpo es.
Date: b1 nature (Applicant or Agent):
Application Number . . . . . 11-00000428
Structure Information
Construction Type . .
. . . TYPE V, UNPROTECTED
Occupancy Type . .
. . . DWELLG/LODGING/CONG <=10
Other struct info . .
. . . CODE EDITION 2010
# BEDROOMS
1.00
FLOOD ZONE NO
----------------------------------------------------------------------------
1ST FLOOR SQUARE FOOTAGE
266.00
Permit
BUILDING PERMIT
Additional desc .
Permit Fee . . . .
252.00 Plan Check Fee
163.80
Issue Date . . . .
Valuation . . . .
25000
Expiration Date
2/21/12
Qty Unit Charge
Per
Extension
BASE FEE
45.00
23.00 9.0000
---------------------------------------------------------
THOU BLDG 2,001-25,000
-------------------
207.00
Permit
ELECT - ADD/ALT/REM .
Additional desc . .
Permit Fee . .
24.31 Plan Check Fee
6.08
Issue Date
Valuation . . . .
0
Expiration Date
2/21/12
Qty Unit Charge
Per
Extension
BASE FEE
15.00
266.00 .0350
-----------------------------------------------------------------------------
ELEC NEW RES - 1 OR 2 FAMILY
9.31
Permit . . .
MECHANI_CAL
.Additional desc .
Permit Fee . . . .
24.00 Plan Check Fee
6.00
Issue Date . . . .
Valuation . . . .
0
Expiration Date
2/21/12
Qty Unit Charge
Per
Extension
BASE FEE
15.00
2.00 4.5000
----------------------------------------------------------------------------
EA MECH VENT INST/ DUCT ALT
9.00
Permit . . .
PLUMBING
Additional desc .
Permit Fee . . . .
33.00 Plan Check Fee
8.25
Issue Date . . . .
Valuation . . . .
0
Expiration Date . .
2/21/12
LQPERMIT
Application Number . . . . . 11-00000428
Permit . . . . PLUMBING
Qty Unit Charge Per
Extension
BASE FEE
15.00
3.00 6.0000 EA PLB FIXTURE
18.00
-----------------------------------------------------------------------------
Special Notes and Comments
266 SF ATTACHED CASITA W/ BAR SINK.,
REMODEL OF EXISTING BATHROOM AT -
CONNECTION OF NEW CASITA. 2010 CODES..
-----------------------------------------------------------------------------
Other Fees . . . . . . . . BLDG STDS ADMIN
(SB1473)
1.00
ENERGY REVIEW
FEE
16.38
STRONG MOTION
(SMI) - RES
2.50
Fee summary Charged Paid
Credited
Due
Permit'Fee,Total. 333.31- .00
.00
333.31
Plan Check Total 184.13 .00
.00
184.13
Other Fee Total 19.88 .00
.00
19.88
Grand Total 537.32 .00•
.00
537.32
LQPERMIT
Bin # ��
City of La Quinta
Building 8r Safety Division
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
Project Address: `" , &Q PAt-Apo Af
Owner's Name: Aoe)eQr f c- 61U tVol
A. P. Number:
Address:�1305o
Legal Description:
City, ST, Zip:
Contractor: 14CA"S V
Telephone: •:::)'}:4i� fn: �: f:;;:.4� is i>:ii: ......... :
Address: /� `�
Project Description: Co k/ U �--V-1, p L_ -F C
City, ST, Zip: 8
v&
f6
G FO U /"
Telephone:
>:<::<:;;a:s:<:<:.;;>,.;:�r
l•t�
State Lic. # :
City Lic.
Arch., Engr., Designer:
Address: p p 2Gj
City., ST, Zip:
Telephone: 70,D !� 7 _(0 D �� :;;t:;:;:;:::;:;::<:;s;: ::: ;;;;;;.
ii:..:i:.i:::le :...:::.
Yi i•I,.... ..�C lit :'..... }nj
State Lic. #: Z 1 #<'•:<>:s
G CT✓
Name of Contact Person: DvCC�"'
Construction Type: V /v Occupancy: " (/
Project a circle one • New dd' Alter Repair Demo
J type � )• � P
Sq. Ft.: 24ra# Stories: 1 # Units:
Telephone # of Contact Person: (
Estimated Value of Project: G-�^ 6vo
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd Reec'd
TRACKING
PERMIT FEES
Plan Sets
O'
Plan Check submitted
Item
Amount
Structural Calcs.
Reviewed, ready f corrections
!<
Plan Check Deposit
Truss Calcs.
Called Contact Pers
sj i,1'r
Plan Check Balance.
Title 24 Calcs.
Plans picked up
/4p
Construction
Flood plain plan
Plans resubmitted
Mechanical
2°" Review, ready for correction(lssue
Electrical
Subcontactor List
Called Contact Person
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
'"' Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.I.P.P.
Pub. Wks. Appr
Date of permit issue y
M
School FeesJV11w
y OW
I
Total Permit Fees
7 �-
iia ( \I� 'Bh*?&� d,"4
�/� A)S 1040V,601,
r
Date
8/17/11
No.
31083
Owner
Robert & Karen Giorgi .
Address
48680 Full Moon Way
City
La Quinta Zip 92253
Tract #
Type
Residential Addition
CERTIFICATE OF COMPLIANCE
Desert Sands Unified School District
47950 Dune Palms Road
La Quinta, CA 92253
(760) 771-8515
APN #
Jurisdiction
Permit #
No. of Units
4��N�FIEDSc�O
Q BERMUDA DUNES
RANCHO MIRAGE
INDIAN WELLS
�VPALM DESERT y
�T LA QUINTA
Q INDIO y�
623-470-015
La Quinta
1
Lot # No. Street S.F. Lot # No. Street S.F.
Unit 1 48680 Full Moon Way 266 Unit 6
Unit 2 Unit 7
Unit 3 Unit 8
Unit 4 Unit 9
Unit 5 Unit 10
Comments Aft. Garage Conversion to Casita
At the present time, the Desert Sands Unified School District does not collect fees on garages/carports, covered patios/walkways, residential additions under
500 square feet, detached accessory structures (spaces that do not contain facilities for living, sleeping, cooking, eating or sanitation) or replacement mobile
homes. It has been determined that the above-named owner is exempt from paying school fees at this time due to the following reason:
Residential Addition 500 Sq Feet or Less
EXEMPT
This certifies that school facility fees imposed pursuant to
Education Code Section 17620 and Government Code 65995 Et Seq.
in the amount of $0.00 X 266 S.F. or $0.00 have been paid for the property listed above and that
building permits and/or Certificates of Occupancy for this square footage in this proposed project may now be issued.
Fees Paid By Exempt - Bill Higgins Check No.
Name on the check Telephone
Funding Exempt
By Dr. Sharon P. McGehee
Superintendent
Fee collected /exemp by S r MC i rey Payment Recd �I�0.0� 0
_'Over/UpileF.
.r
Signature
NOTICE: Pursuant /to Government Code Section 66020(d)(1), this serve to notify you that the 90 -day approval period in which 'you may protest the fees
or other payment identified above will begin to run from the date on which the building or installation permit for this project is issued, or from the date on
which those amounts are paid to the Disti&ict(s) or to another public entity authorized to collect them on the District('s) behalf, whichever is earlier.
NOTICE: This Document NOT VALID without embossed seal
Embossed Original - Building Department Applicant Copy - Applicant/Receipt Copy - Accounting
L'a-coo Fvw k4emi
SWANSON & ASSOCIATES 17055 Via Del Campo SUITE 100 SAN DIEGO, CA 92127 (858) 487-7600
11. 042.8
Pt -w V/ -L -x
OAVEAL
I
REVISIONS
CLEEllT=
ATT•0 TO:
Pp -0A
FAX=
Com- P-010
App (2)
L-Tf+, NpR To
kIrIG STuh
M6Qt kI1JG STUB
V OFES,Sj��
Ci Z rn
rrEM NO.
azo.-.cT=
GI O WG
TATE=SHEET
-i1 •rz
:GALE= NTS ( of-
HIDDEN CANYON HOMEOWNERS ASSOCIATION
ARCHITECTURAL VARIANCE REQUEST
Avail Property Management 51350 Desert Club Dr. Suite 4, La Quints, CA 92253
(760) 711-546 760-771-1665 (tax) service@Availbea tom
PLEASE ALLOW A WNIMUM OF TWO WEEKS FOR APPROVAL
DATE •-1 I/ LOT NUMBER
HOMEOWNER NAME(S)�K
PROPERTY ADDRESS t.r 1
DRESS
PHONE NUMBER( 7 (a v U ��
y
EMAIL ADDRESS: i o 1-a I Cz In co
Refundable Security Deposit must be included with submittal to the committee (if applicable)
$1500.00 Check # 338'
VENDOR NAME/CONTACT/PHONE NUMBER:
UWe understand the following:
1. All necessary (Sty permits will be obtained prior to starting wort and the cost of the.Pmnits, the responsibility for obtaining
the permits and subsequent inspections will be borne by the applicant
2. No materialls will be stored in the street at anytime. All mumials an to be stared on a protective barrier an homeowner
property -
3. AU debris cams- be cleaned from the front yard on a daily basis.
4. Any dirftbris left in the at must be removed and/or swept up and washed clean at the and of each wort day.
S. 7bc site must be left in a safe and segue mama at the end of each wort day.
6. The homeowner wt71 be responsible for any damage to the common areas caused by the contractor during construction..
7. Homeowner6ere les. sr-ble far notilj ing all aT i I utility companies and properly marking the 'dig, areas
S. No equipment or construction vehicles will be left ov®iAt in the street or visible to the suet.
9. Comvuytiaa of alrwhobt beverages, controlled substances or illegal drugs is strictly prohibited and is anise of immediate
removal tram the property.
10. All dirt areas not landscaped or otherwise prepared mud be treated with an agent to prevent blowing dust ad;or sand. /We
err, alodge that all approved changes in the original design will be at our expense, that any damW to or relocation of
existing sprinkler systems, underground utilities, building structure -tenor landscaping err any other damage resulting
Som implemematioo of these permitted improvements will be at the applicants expense.
11. Wort must begin within 45 days from application approval and completed within 90 days of approval. Additional time
frames tmst be requested to the Board
12. It is the applicanfs responsibility to advise any stdrsequent owner of the modifications and any subsequent maintenance
13. 7bat should aryof the above f vroht- fine may be forthcoming.
Signature of _ - Dale
Date (f
Date
Page 1 of l
1-ECEIvEn
BY:
APR 2 9 2011
SPECIFICATIONS
SLSLEAI
` ��.r�� rrriu�r'Pfr�.Iwr�Y
rwwwrrrrr.rrrrrrw
.warwwrrrrrYr.
irewrrei.y~r r�r
�bwrn r l..rY rlrw... rtr rMrA
r.•rrrrwrrr
1 wrpr...�/rrr�.w�lrbr�.rrrr�wr..r
` wr.rYl�r r�.r.rrl/
rb.r riYr►.rw.rr r.•r
risr`rrr.rrrr•r.r
•1�'•rr�.ewrrr.rrwewrw
rr.�rrw.f•�.r.•o•r Ivrr
R1.rOw
rrr.rw.r.�rrrrw.
r.wrr.
fYT r �r
rrr.ar.rr rrrr
rrri rrrr.�i•rrrr�ir.s
r.r...rwr.rs+
-i: .rr.rr.rrrrr
e.ir.r.rbw.rr. w.r wr.r
Mr • p rr r r r •. r •.T. rrrr. w
11r1..r�r.. Y.brfb...lb..rnrr
` Yrr.•T.rrrlrr•Ir •wwrr
r1rr��r.r.r�lrr\•r
i 4w.I.>r.>•�rw.wrrrlll�r.r
YIT•1•
IY_rrr lr.rrr�r\Yrrwfrr•
rrwrrr..rrr.rrr .rrrrry
\ rr.. rwY� r•Yr.r.l.r YrrY
. iirrr�r.rrrrrr�.
.rr•\rr.r.r.rw.rrrrY.r.
1�+1� r�► °�.rr.rwr.
�Yr nr �Yyrywrrla.Yr.
' rYwiriO4YY~i+.wiY1:IwuL
C...LrT
rrr.rrrrr.
rrrrrwr.rrl rYrrrYr.rrt
• � srr. r.r.r�.r..wr.
• M.��. rrr~r.rrrrrrwr
• orrirrrrrrw.rrr.r
r rrr'i
1 a....rrry.....r..rr
Y.r/1..l.r.rrY...rrrrrlllrl
1 Trrrr.wwrr.rr�r.
\ Yr.i�irrr.rrr.w+rrYrr
1 rrtYrr/ rrrrrrrr.rr
• wry. rr+alw.wrrry.
1 1r�rlirrrolbo.r Y.rrr.Yr
\ ` rwllY./r.1rr..wrrrrl.•
.r rwrrrr.r rr.r. rrY Irw.
r �rJ.�i rrrrr.rrrrrrY
.wwrrrewrrrr
i� wrrr..IwgY+.rwwrr
�.rrr rr=� Y..rC�.✓•r•rr
1 rrrr.rs.rr•�
/ �Yr.•��Yr..u..r.r�u..w
�� + •rY.�b.Yr.1...Yrwrr
• .r.r.r�rrrrrrrr.
• lri~rrr rrrr.irinrwlr
ar.sr .wr.rr...wr
wrrrr..rrr......r wrr
\ eir.rr"r.�rw.rir►
r.
VICINITY MAP 1111yy
SII LO6AIOovRrmmWel.Vam
SHEETINDEX
M MrIRARr71�Yr�.
M rwLa.rns
M QT�1{•
NOTES
I.Aalr•wplr.wrrrr•
L•Yr rlrNrrlllr.l.o.r
A.OI.I. r.wr W I W r iw b.t.
is.+ wwrw.rr.r
rlrf.rrrryV•
er.ir..rw w r • sr.rll r, r Y
AMrrrY..rr.wrrrpr.
wf.rr..w... Yp r.r.rw•r.. ~
Olw4rrsr.�Y
• rr�w w r �wwrl e.aYl wr....
1
1 ♦\
I ♦
1 \♦
I ♦
I �
I
I
II HOUSE2A30 son.
1 /1
AREA SUMMARY
I BUILDING CODE DATA LEGEND
PLOT PLAN
wm 17'-7'
LEGAL DESCRIPTION
AIR
FRT EASTIH6
CM2T OARAM
WALL LEGEND
. 1
0 00"M WAUS
- . Lr) KV RAU3
OCCUPARCTOROUP: fait"
OESgIRl1DN
OF UM SWU FAMILY VWW MQ
W ATTACHED MRAs!
TYPE OF COMITWCTM: VD
6PR2002ASIM OR RQr. No
STORIES: ,
HebHr.u'
(E) DARAQR • ma SM".
(E) WOO. 7A30 SQiT.
CONVERT OW CART MRAOE
TO (M) CABRA r 29 SQ.:T.
SCOPE OF VMW-
COUVFRT M OCLP CAR QARAC6 TO UVMa AREA f M Sa.FT.
AND NO= MERM ALTBIIATbR&
REMOVE Alb REPLACE EMTIRQ
Nm r, wRILDOLMS. UVMQ ROOM BLOMQ CLASS DOOR
#t
MOMM
"001M
g•
� M
m iueo
ro a.w
1
oYD s eoo �aooe
m a«oaw«soa
.�
r�Rramar
yl
� CLOG
BiM1
am
•
MASTER OEMWINO
IOTCNEN
HALL
LAYROR1i
ENT"
� HALL
MASTER 8A
O
'
gA/Z
Dtmwo
CLCSV Q
GARAGE
gCIL�R cgOCAC1W11M1vEIW1
O
K K /
La/
a M
1
yy
�
tai.
:3
i
ti:�.:?
e
NEW C
i '`�' §S
FLOOR PLAN
SCAM 1/6". 1'.r
WALL LEGEND
"001M
g•
� M
SECTION C EAST ELEVATION
(B)$WEST ELEVATION
NORTH ELEVATION
WCARM
ARCHITECTURAL VARIANCE Approval Form
LOT NUIm
PROPERTY
ARC A !
t =�Y % Date %
( � By —Y//—/
( )Pcnding Fmthw Date
aonimeu oi77--V-6�F /�J11/l�s �/t% lWIWZZ-S:, z
ARC ADDtoval 2
i (� By nate
( r mer uttoaaatioa Date
Commelft
Board Approva1
() AWoved By
( )Rejected By Date
( )P� r motion Date
Comte
Compk'oed Wo* by
ectad
Sec"Dqwsit
1/14/2009
Page I of 1
S
I BUILDING ENERGY ANALYSIS REPORT I
PROJECT:
Robert & Karen Giorgi Alteration/Addition
48-680 Full Moon Way
La Quinta, Ca 92253
Project Designer:
Coachella Valley Architects
P.O. Box 5291
La Quinta, Ca 92248
(760) 498-6881
Report Prepared by:
Tim Scott
Scott Design and Title 24, Inc,
77-085 Michigan Drive
Palm Desert, Ca 92211
(760) 200-4780
RECB E0
JUL 21 2011
BY:
Job Number:
Date:
6/7/2011
a «:
CITY OF LA QUINTA
BUILDING & SAFETY DEPT
APPROVED
FOR CONSTRUCTION
a • i0
I �
r '
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2008 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC — www.energysoft.com.
EnerovPm 5 1 by EnetavSoR User Number- 6712 RunCode: 2011-06-06T14.03:00 !D:
Vii,
C.
•
PERFORMANCE CERTIFICATE: Residential Part 1 of 5
CF -1 R
Project Name
Robert & Karen Giorgi Alteration/Addition
Building Type m Single Family ❑ Addition Alone
❑ Multi Family la Existing+ Addition/Alteration
Date
6/7/2011
Project Address
48-680 Full Moon Way La Quinta
California Energy Climate Zone
CA Climate Zone 15
Total Cond. Floor Area
2,696
Addition
266
# of Stories
1
FIELD INSPECTION ENERGY CHECKLIST
❑ Yes IZI No HERS Measures -- If Yes, A CF -413 must be provided per Part 2 of 5 of this form.
El Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details.
INSULATION
Construction Type
Area Special
Cavity (ft) Features see Part 2 of 5 Status
Roof Wood Framed Attic R-13 2,430 Existing
Wall Wood Framed R-11 1,935 Existing
Door Opaque Door None 24 Existing
Slab Unheated Slab -on -Grade None 2,430 Perim = 260' Existing
Roof Wood Framed Attic R-38 266 New
Wall Wood Framed R-21 386 New
Slab Unheated Slab -on -Grade None 266 Perim = 48' New
FENESTRATION U- Exterior
Orientation Area(ft) Factor SHGC Overhang Sidefins Shades Status
Rear (N) 93.8 0.450 0.39 none none Bug Screen New
Rear (N) 81.2 0.820 0.71 none none Bug Screen Existing
Rear (N) 120.0 0.530 0.39 10.0 none Bug Screen New
Right (E) 48.0 0.530 0.39 none none Bug Screen Altered
Right (E) 75.3 0.820 0.71 none none Bug Screen Existing
Front (S) 59.6 0.820 0.71 none none Bug Screen Existing
Left (tM 32.5 0.820 0.71 none none Bug Screen Existing
Left (W) 40.2 0.530 0.39 none none Bug Screen New
Right (E) 53.6 0.530 0.39 none none Bug Screen New
Front (S) 30.0 0.710 0.73 none none Bug Screen Existing
HVAC SYSTEMS
Ot . Heating Min. Eff
Cooling Min. Eff Thermostat Status
1 Central Furnace 80% AFUE
Split Air Conditioner 13.0 SEER Setback Existing
HVAC DISTRIBUTION
Location Heating
Duct
Cooling Duct Location R -Value Status
Existing HVAC Ducted
Ducted Attic, Ceiling Ins, vented 4.2 Existing
WATER HEATING
Ot . Type Gallons Min. Eff Distribution Status
EnergyPro 5.1 by EnergySoft User Number: 6712
Run Code: 2011-06-06714:03:00 ID:
Page 3 of 12
•
•
•
PERFORMANCE CERTIFICATE: Residential (Part 2 of 5) CF -1 R
Project Name
Robert & Karen Giorgi Alteration/Addition
Building Type m Single Family ❑ Addition Alone
1 ❑ Multi Family m Existing+ Addition/Alteration
I Date
6/7/2011
SPECIAL FEATURES INSPECTION CHECKLIST
The enforcement agency should pay special attention to the items specified in this checklist. These items require special written
justification and documentation, and special verification to be used with the performance approach. The enforcement agency
determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of
the special justification and documentation submitted.
The Existing Roof Roof Exisitng has a U -Factor greater than the Vintage Defaults. Field verification is required.
HERS REQUIRED VERIFICATION
Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a
completed CF -4R form for each of the measures listed below for final to be given.
EnergyPro 5. 1 by EnemySoft User Number: 6712 Run Code: 2011-06-06714:03:00 /D: Page 4 of 12
C
•
PERFORMANCE CERTIFICATE: Residential (Part 3 of 5) CF -1 R
Project Name
Building Type m Single Family 0 Addition Alone
Date
Robert & Karen Giorgi Alteration/Addition
❑ Multi Family m Existing+ Addition/Alteration
6/7/2011
ANNUAL ENERGY USE SUMMARY
Standard Proposed Margin
TDV kBtu/ft2- r
Space Heating 16.16 14.71 1.45
Space Cooling 120.96 121.78 -0.82
Fans 26.96 27.04 -0.08
Domestic Hot Water 13.92 13.92 0.00
Pumps 0.00 0.00 0.00
Totals 178.00 177.44 0.55
Percent Better Than Standard: 0.3%
BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED
Fenestration
Building Front Orientation: (S) 180 deg Ext. Walls/Roof Wall Area Area
Number of Dwelling Units: 1.00 (S) no 90
Fuel Available at Site: Natural Gas (w) 742 73
Raised Floor Area: 0 (N) 684 295
Slab on Grade Area: 2,696 (E) 854 177
Average Ceiling Height: 9.7 Root 2,696 0
Fenestration Average U -Factor: 0.64 TOTAL: 634
Average SHGC: 0.53 Fenestration/CFA Ratio: 23.5%
REMARKS
The Vintage
STATEMENT OF COMPLIANCE
This certificate of compliance lists the building features and specifications needed
to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the
Efficiency Standards of the California Code of Regulations.
The documentation author hereby certifies that the documentation is accurate and complete.
Documentation Author
Company Scott Design and Title 24, Inc,
&I
61712011
Address 77-085 Michigan Drive Name Tim Scott
City/State/ZipCity/State/Zip Palm Desert, Ca 92211 Phone (760) 200-4780 Signed Date
The individual with overall design responsibility hereby certifies that the proposed building design represented in this set
of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and
with any other calculations submitted with this permit application, and recognizes that compliance using duct design,
duct sealing, verification of refrigerant charge, insulation installation quality, and building envelope sealing require.
installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Company Coachella Valley Architects
Address P.O. Box 5291 Name Jerry Dohn
City/State/Zip La Quinta, Ca 92248 Phone (760) 498-6881 Signed License # Date
Ene Pro 5.1 6 Ene Soft User Number: 6712 RunCode: 2011-06-06714:03:00 ID: Pa e 5 of 12
•
•
CERTIFICATE OF COMPLIANCE: Residential (Part 4 of 5) CF -1 R
Project Name
Robert & Kahn Giorgi Alteration/Addition
Building Type m Single Family ❑ Addition Alone
❑ Multi Family 10 Existing+ Addition Alteration
Date
6/7/2011
OPAQUE SURFACE DETAILS
Surface
Type Area
U- Insulation Joint Appendix
Factor Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
Roof
2,430
0.071 R-13
0 0 Existing 4.2.1-A3
Existing Residence
Wall
389
0.110 R-11
0 90 Existing 4.3.1-A2
Existing Residence
Wall
591
0.110 R-11
90 90 Existing 4.3.1-A2
Existing Residence
Wall
450
0.110 R-11
180 90 Existing 4.3.1-A2
Existing Residence
Wall
190
0.110 R-11
180 90 Removec 4.3.1-A2
Existing Residence
Wall
505
0.110 R-11
270 90 Existing 4.3.1-A2
Existin2 Residence
Door
24
0.500 None
270 90 Existing 4.5.1-A4
Existing Residence
Slab
2,430
0.730 None
0 180 Existing 4.4.7-A1
Existing Residence
Roof
266
0.026 R-38
0 20 New 4.2.1-A9
Addition
Wall
86
0.069 R-21
90 90 New 4.3.1-A6
Addition
Wall
160
0.069 R-21
180 90 New 4.3.1-A6
Addition
Wall
140
0.069 R-21
270 90 New 4.3.1-A6
Addition
Slab
266
0.730 None
0 180 New 4.4.7-A1
Addition
FENESTRATION SURFACE DETAILS
ID
Type
Area U -Factor
SHGC
Azm Status Glazing Type
Location/Comments
1
Window
18.0 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
2
Window
18.0 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
3
Window
53.6 0.450 NFRC
0.39 NFRC 0 New Double TB -Tint -Fixed
Existing Residence
4
Window
8.0 0.820 NFRC
0.71 NFRC 0 Existing Dual Metal Clear
Existing Residence
5
1 Window
18.0 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
6
Window
18.0 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
7
Window
40.2 0.450 NFRC
0.39 NFRC 0 New Double TB -Tint -Fixed
Existing Residence
8
Window
19.2 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
9
Window
48.0 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
10
Window
19.2 0.820 NFRC
0.71 NFRC 0 Removed Dual Metal Clear
Existing Residence
11
Window
120.0 0.530 NFRC
0.39 NFRC 0 New Double TB Tinted-Oper
Existing Residence
12
Window
12.6 0.820 NFRC
0.71 NFRC 0 Existing Dual Metal Clear
Existing Residence
13
Window
48.0 0.820 NFRC
0.71 NFRC 0 Existing Dual Metal Clear
Existing Residence
14
Window
12.6 0.820 NFRC
0.71 NFRC 0 Existing Dual Metal Clear
Existing Residence
15
Window
48.0 0.530 NFRC
0.39 1 NFRC 90 Altered Double TB Tinted-Oper
Existing Residence
16
Existing
0.820 NFRC
0.71 NFRC Dual Metal Clear
pre -altered for above
(1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value
2 SHGC Type: 116-13 = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type SHGC
Window
Hot Wd
Ove hang Left Fin
Len H t LExt RExt Dist Len
Ri ht Fin
Hot Dist Len H t
1
Bug Screen
0.76
2
Bug Screen
0.76
3
Bug Screen
0.76
4
Bug Screen
0.76
5
Bug Screen
0.76
6
Bug Screen
0.76
7
Bug Screen
0.76
8
Bug Screen
0.76
6.0 3.2 10.0 0.1 10.0 10.0
9
Bug Screen
0.76
8.0 6.0 10.0 0.1 10.0 10.0
10
Bug Screen
0.76
6.0 3.2 10.0 0.1 10.0 10.0
11
Bug Screen
0.76
8.0 15.0 10.01 0.1 10.0 10.0
12
Bug Screen
0.76
13
Bug Screen
0.76
14
Bug Screen
0.76
15
Bug Screen
0.76
16
JBug Screen
1 0.761
1
EnemyPro
5.1 by EnergySoft User Number: 6712
RunCode: 2011-06-06714:03:00 ID:
Page 6 of 12
•
•
CERTIFICATE OF COMPLIANCE:
Residential (Part 4 of 5) CF -1 R
Project Name
Robert & Karen Giorgi Alteration/Addition
Building Type m Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
6/7/2011
OPAQUE SURFACE DETAILS
Surface u-
Type Area Factor
Insulation Joint Appendix
Cavity Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments
FENESTRATION SURFACE DETAILS
ID
Type Area
LI -Factor'
SHGC
Azm Status Glazing Type
Location/Comments
17
Window 21.3
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
18
Window 4.0
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
19
Window 4.0
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
20
Window 6.0
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
21
Window 20.0
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
22
Window 20.0
0.820 NFRC
0.71 NFRC
90 Existing Dual Metal Clear
Existing Residence
23
Window 4.0
0.820 NFRC
0.71 NFRC
180 Existing Dual Metal Clear
Existing Residence
24
Window 15.8
0.820 NFRC
0.71 NFRC
180 Existing Dual Metal Clear
Existing Residence
25
Window 24.0
0.820 NFRC
0.71 NFRC
180 Existing Dual Metal Clear
Existing Residence
26
Window 15.8
0.820 NFRC
0.71 NFRC
180 Existing Dual Metal Clear
Existing Residence
27
Window 32.5
0.820 NFRC
0.71 NFRC
270 Existing Dual Metal Clear
Existing Residence
28
Window 18.0
0.820 NFRC
0.71 NFRC
270 Removed Dual Metal Clear
Existing Residence
29
Window 18.0
0.820 NFRC
0.71 NFRC
270 Removed Dual Metal Clear
Existing Residence
30
Window 40.2
0.530 NFRC
0.39 NFRC
270 New Double TB Tinted-Oper
Existing Residence
31
Window 53.6
0.530 NFRC
0.39 NFRC
90 New Double TB Tinted-Oper
JAddition
32
Window 15.0
0.710 Default
0.73 Default
180 Existing I Double Metal Clear
JAddition
(1) Ll -Factor Type:
2 SHGC Type:
116-A = Default Table from Standards, NFRC = Labeled Value
116-B = Default Table from Standards, NFRC = Labeled Value
EXTERIOR SHADING DETAILS
ID
Exterior Shade Type
SHGC
Window
H t Wd
Ove hang Left Fin
Len H91_ LExt RExt Dist Len
Right Fin
H t Dist Len H t
17
Bug Screen
0.76
18
Bug Screen
0.76
19
Bug Screen
0.76
20
Bug Screen
0.76
21
Bug Screen
0.76
22
Bug Screen
0.76
23
Bug Screen
0.76
24
Bug Screen
0.76
25
Bug Screen
0.76
26
Bug Screen
0.76
27
Bug Screen
0.76
28
Bug Screen
0.76
6.0 3.2
10.0 0.1 10.0 10.0
29
Bug Screen
0.76
6.0 3.2
10.0 0.1 10.0 10.0
30
Bug Screen
0.76
31
Bug Screen
0.76
32
Bug Screen
1 0.76
EnergyPro
5.1 by EnergySoft
User Number. 6712 Run Code: 2011-06-06T14:03:00 ID:
Page 7 of 12
•
1 ,
CERTIFICATE OFCOMPLIANCE:
Project•
,Robert• • AlterationlAddition
• Type f•I Single Family ■ Addition Alone
■Multi Family Pi • `•• • •
••
OPAQUE SURFACE DETAILS
IVIII Joint Appendix
4 Location/Comments
FENESTRATION11F.1
Metal Clear
(1) U -Factor Type: 11 6-A = Default Table from Standards, NFRC = Labeled Value
(2y_SHGC Type; 11 6-B = Default Table from Standards, NFRC = Labeled Value
EXTERIORDouble
MF -
Exterior Shade Type
- • - • • - - I 1. 1. I 11 •
EnergyPro 5.1 FyEnergySoft User Number: 6712 Run Code: 2011-06-06714:03:00 ID: Page 9 of 12
CERTIFICATE OF COMPLIANCE: Residential (Part 5 of 5) CF -1 R
dh
Project Name
Robert & Karen Giorgi Alteration/Addition
Building Type D Single Family ❑ Addition Alone
❑ Multi Family m Existing+ Addition/Alteration
Date
6/7/2011
BUILDING ZONE INFORMATION
System Name Zone Name
Floor Area
New Existinq Altered Removed Volume Year Built
Existing HVAC Existing Residence
2,430 23,571 1998
Addition
266 2,660
Totals 1 2661 2,4301 01 0
HVAC SYSTEMS
System Name Qty. Heating Type
Min. Eff. Cooling Type Min. Eff. Thermostat Type Status
Existing HVAC 1 Central Furnace
80% AFUE Split Air Conditioner 13.0 SEER Setback Existing
HVAC DISTRIBUTION
System Name Heating
Duct Ducts
Cooling Duct Location R -Value Tested? Status
Existing HVAC Ducted
Ducted Attic, Ceiling Ins, vented 4.2 ❑ Existing
WATER HEATING SYSTEMS
S stem Name
Qty.
Type
Distribution
Rated
Input
Btuh
Tank
Cap.
al
Energy
Factor
or RE
Standby
Loss or
Pilot
Ext.
Tank
Insul. R-
Value
Status
Standard Gas 50 gal or Le
1
Small Gas
No Pipe Insulation
40,000
50
0.57
n/a
n/a
Existing
MULTI -FAMILY WATER
HEATING
DETAILS
HYDRONIC
HEATING SYSTEM
PIPING
Control
Hot Water Piping Length
(ft)
o
i�
En
a —
System Name
Pipe
Length
Pipe
Diameter
Insul.
Thick.
Qt . HP
Plenum Outside Buried
❑
EnergyPro 5.1 FyEnergySoft User Number: 6712 Run Code: 2011-06-06714:03:00 ID: Page 9 of 12
4
MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R
Project Name
obert & Karen Giorgi Alteration/Addition
Date
6/7/2011
NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of
the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF -
1 R -ALT Form) shall supersede the items marked with an asterisk (') below. This Mandatory Measures Summary shall be incorporated
into the permit documents, and the applicable features shall be considered by all parties as minimum component performance
specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R
Form with plans.
Building Envelope Measures:
116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage.
§116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain
Coefficient SHGC , and infiltration that meets the requirements of 10-111 (a).
117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed.
118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -611 Form.
§118(1): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(i) when the
installation of a Cool Roof is specified on the CF -1 R Form. -
* 150(a): Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor.
150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value.
150(c): Minimum R-13 insulation in wood -frame wall orequivalent LI -factor.
150(d): Minimum R-13 insulation in raised wood -frame floor orequivalent U -factor.
150(f): Air retarding wrap is tested, labeled, and installed according to ASTM El677-95 2000 when specified on the CF -1 R Form.
150 : Mandato Vapor barrier installed in Climate Zones 14 or 16.
§150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance
rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration.
Fireplaces, Decorative Gas Appliances and Gas Log Measures:
e 1 A: Mason or factory -built fireplaces have a closable metal or lass door coveringthe entire opening of the firebox.
(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is
El ed with a with a readil accessible, o erable, and ti ht-fittin dam er and or a combustion -air control device.
(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the
de of the building, are prohibited.
Space Conditioning, Water Heating and Plumbing System Measures:
§110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy
Commission.
§113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release
valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of §113(c)5.
§115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances
(appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and
spa heaters.
150(h): Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA.
150(i): Heating system s are equipped with thermostats that meet the setback requirements of Section 112(c).
§1500)1A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped
with insulation having an installed thermal resistance of R-12 or greater.
§1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water
tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the
tank.
§1500)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of
recirculating sections of hot water pipes are insulated per Standards Table 150-B.
§1500)2: Cooling system piping (suction, chilled water, or brine lines),and piping insulated between heating source and indirect hot
water tank shall be insulated to Table 150-B and Equation 150-A.
§1500)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table
123-A.
150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture equipment maintenance and wind.
§1500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor retardant or is enclosed entirely in
conditioned space.
150(j)4: Solar water -heating systems and/or collectors are certified by the Solar Rating and Certification Corporation.
EnergyPro 5.1 by EnergySolf User Number: 6712 Run Code: 2011-06-06T14:03:00 ID: Page 10 of 12
4
MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R
Project Name
Date
obert & Karen Giorgi Alteration/Addition
6/7/2011
§150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections
601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-
4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the
applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is
used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used
§150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may
contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area
of the ducts.
§150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes
unless such tape is used in combination with mastic and draw bands.
150(m)7: Exhaust fans stems have back draft or automatic dampers.
§150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated
dampers.
§150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind.
Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar
radiation that can cause degradation of the material.
150 m 10: Flexible ducts cannot have porous inner cores.
§150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2=2007 Ventilation and Acceptable Indoor Air
Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation
required in Section 4 of that Standard.
Pool and S a Heating Systems and Equipment Measures:
§114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency
Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and
shall not use electric resistance heating ora pilot light.
§114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction
and return lines or built-up connections for future solar heating.
114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover.
§114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or
programmed to run only during off-peak electric demand periods.
150 : Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150 .
Residential Lighting Measures:
§150(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies
contained in Table 150-C and is not a low eff icacy luminaire asspecified by §150(k)2.
150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d).
§150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than
20 kHz.
§150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain
only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line -
voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a
medium screw -base socket.
150(k)6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k).
150(k)7: All switching devices and controls shall meet the requirements of §150(k)7.
§150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy.
EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be
exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant
sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed
luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a
manual -on occupant sensor.
§150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of
illuminated cabinet.
EnergyPro 5.1 by EnergySoft User Number: 6712 Run Code: 2011-06-06714:03:00 ID: Page 11 of 12
4
MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R
Project Name
Date
obert & Karen Giorgi Alteration/Addition
1 6/7/2011
§150(k)10: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms
shall be high efficacy.
EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on
occupant sensor certified to comply with the applicable requirements of §119.
EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a
manual -on occupancy sensor.
§150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms,
closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be
allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual -
on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less
than 1000 square feet located on a residential site is not required to comply with §150 k 11.
§150(k)l2: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters
Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air
leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between
the luminaire housing and ceiling.
§150(k)l3: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more
dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the
same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that
they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor,
and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an
astronomical time clock not having an override or bypass switch that disables the astronomical time clock; OR an energy management
control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor
luminaires used to comply with Exceptionl to §150(k)l3 may be controlled by a temporary override switch which bypasses the motion
sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed
luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not
be high efficacy luminaires.
§150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no
more than five watts of power as determined according to §130(d).
§150(k)l5: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable
requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable
requirements of Sections 130, 131, 134, and 146.
§150(k)l6: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided
that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119.
EnergyPro 5.1 by EnergySoft User Number.- 6712 RunCode: 2011-06-06T14:03:00 ID: Page 12 of 12