The URL can be used to link to this page

13-0885 (RER)P.O. BOX 1504 78-495 CALLE TAMPICO t LA QUINTA, CALIFORNIA 92253 Application Number: 13-00000885 Property Address: 81140 GOLF VIEW DR APN: 762-280-024- - - Application description: REMODEL - RESIDENTIAL Property Zoning: LOW DENSITY RESIDENTIAL Application valuation: 15000 T-4,tit 4 W BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Owner: BRENT TAYLOR 81140 GOLF VIEW DRIVE LA QUINTA, CA 92253 ID r ( I Applicant: Architect or Engineer: LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: License No.: Date: Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any scant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars (5500).: p I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.)• as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). ^ ') I am exempt under Sec. , B.&P.C. for this reason Date: &119113 Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued ISec. 3097, Civ. C.). Lender's Name: _ Lender's Address: LQPERMIT Contractor: Owner VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 8/09/13 ZX U RU(i 18 2013 L INTA WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: _ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier 2010 Policy Number - - - - - - - - - - - - - - - I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I should become subject to the workers' compensation provisions of Section 3?700 of the Labor Code shat orthwit o/imply with those provisions. Date: �3 �J Applicant: "m WARNING: FAILURE TO SECURE WORKERS' COMP SATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO'CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS (5100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. I . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this county to enter upon the above-mentioned property fo ingpon Pur ses. Date: l3 73 Signature (Applicant or Agentl: G/- Application Number . . . . . 13-00000885 Permit . . ELECTRICAL 2013 Additional desc . . Permit Fee . . . . 23.83 Plan Check Fee .00 Issue Date . . . . Valuation . . . . 0 Expiration Date 2/05/14 Qty Unit Charge Per Extension 1.00 23.8300 LS ELEC DEVICES, FIRST 20 ---------------------------- ----------------------------------------------- 23.83 Permit . . . REMODEL 2013 Additional desc . Permit Fee 60.06 Plan Check Fee .00 Issue Date . . . . Valuation 0 - Expiration Date 2/05/14 Qty Unit Charge Per Extension 1.00 60.0600 LS- MISC DR/WIN, REPL, 1-7 60.06 ---------------------------------------------------------------------------- Special Notes and Comments REPLACE WINDOWS WITH SLIDING GLASS AND ADD EXT LIGHTING . PER 2010 CALIF BUILDING CODES. July 23, 2013 2:28:16 PM jjohnson. this permit does not include alum -wood patio July 24, 2013 10:22:56 AM jjohnson. ---------------------------------------------------------------------------- Other Fees, . . . . . . . . . BLDG STDS ADMIN (SB1473) 1.00 HOURLY PLAN CHECK 70.00 PLAN CHECK, REMODEL 108.68 STRONG MOTION (SMI) - RES 1.50 Fee summary Charged Paid Credited ---------------------------------------=------------ Due - ----- Permit Fee Total 83.89 .00 .00 83.89' Plan Check Total ..00 .00 .00 .00 Other Fee Total 181.18 .00 .00 181.18 Grand Total 265.07 .00 .00 265.07 LQPERMIT REED Bin A-13 City of La Quinta JUL 01 Building a Safety Division 2 13 P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 COMMUNITY DE Q NT Building Permit Application an Tracking Sheet Permit # Project Address: �l -- 40 GCC..F V1 a�W Owner's Name: A. P. Number: %� Z Z �%Q Address: t G;' Q G.i/UC FVIE\� 2 Legal DescriptionU r' 6( 2�6 7 �� City, ST, Zip: Contractor:' Telephone: Address: Project Description: City, ST, Zip: Telephone: xulc State Lic. # : City Lie. Designer: jt:;7( G Ll C%1( MO G (A[' S t�70dP—S Address: 7 7 —6 ZZ Cpo1., rpi-(auo City, ST, Zip -Pt m tw! . (3 Z v Telephone: "760 346Z5 :.�-:'� „> ry ''�spc--i<<> I CuF>,Si:?•%- v:ii;4i�:State Lic. #:; ht! fg Wiz; Name of Contact Person: t �Z) Construction Type: Occupancy: Project type (circle one): New Add' Alter Repair Demo Sq. Ft.: t4b #Stories: 1 #Units: Telephone # of Contact Person: Estimated Value of Project. coo APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Recd TRACKING PERMIT FEES Plan Sets Plan Check submitted Item Amount Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Calcs. Called Contact Person Plan Check Balance Tide 24 Cales. Plans picked up '�I 3 Construction Flood plain plan Plans resubmitted / Mechanical Grading plan 2•" Review, ready for corjecti /issue Electrical Subcontactor List Called Contact Person Plumbing Grant Deed Plans picked up l0 .M.I. Plans resubmitted Grading H.O.A. Approval IN HOUSE:- 7rd Review, ready for co ectiol Isfissuc) Z1 Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issues ��TO [+,qV 6e " r-1 IN School Fees 2- s E� P An) S \ (LAJ 2 S6 S S P.vc Total Permit Fees 7/1,5/3 A)19 A P pP.oL)A61 G' '�-15-13 St'nfi'••b�OJir�t� . 5,p,) C, �tA,),s tjfJ60 Ta �� SfGN 4-6 1�0A- f oT a r2--- � PGRtc�l I� 1�TE �f�>�sc� v�� • � k 1ENT it 2 •r'rtt 2/00 / 1 ' P.O_ Box 1504 LA QUINTA, CALIFORNIA 92 247-1 504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT PROPERTY OWNER'S PACKAGE (7 60) 777-7012 FAX (760) 777-7011 Disclosures & Forms for Owner -Builders Applying for Construction Permits iW-P TAIYTt NOWE TO PROPERTY.OWNER Dear Property Owner. An. application for a building permit has been submitted in your name listing yourself as the builder of the property improvements specified at Y/!yo Goll V/,,j c)�ryU, Co_G1ur,.� !c %2Z5�3 We are Mviding you with an Owner -Builder Acknowledgment and Information Verification Foran to make you aware of your responsibilities and possible tisk you may incur by having this permit issued in your mane as the Owner -Builder. We will not issue a building permit until you have read, initialed your understanding of each provision, signed, and returned this form to us at our official address indicated. An agent of the owner cannot execute this notice unless you, the property owner, obtain the prior approval of the permitting authority. DiREMONS. Read and initial each statement below to signify you understand or verify this information. 1. 1 understand a frequent practice of unlicensed persons is to have the property owner obtain an "Owner -Builder' building permit that erroneously implies that the property owner is providing his or her own labor and material personally. 1, as an Owner -Builder, may be held liable and subject to serious financial risk for any injuries sustained by an unlicensed person and his or her employees while working on my property. My homeowner's insurance may not provide coverage for those injuries. I am willfully acting as an Owner -Builder and am aware of the limits of my insurance coverage for injuries to workers on my property. J/ 2. I understand building permits are not required to be signed by property owners unless they are responsible for the construction and are not hiring a licensed Contractor to assume this responsibility. 461'3. 1 understand as an "Owner -Builder" I am the responsible party of record on the permit. I understand that I may protect myself from potential financial risk by hiring a licensed Contractor and having the permit filed in his or her name instead of my own. /,UC_4. I understand Contractors are required by law to be licensed and bonded in California and to list their license numbers on permits and contracts. 4,6r5. l understand if I employ or otherwise engage any persons, other than California licensed Contractors, and the total value of my construction is at least five hundred dollars ($500), including labor and materials, I may be considered an "employer" under state and federal law. a66. I understand if I am considered an "employer" under state and federal law, I must register with the stale and federal government, withhold payroll taxes, provide workers' compensation disability insurance, and contribute to unemployment compensation for each "employee." I also understand my failure to abide by these laws may subject me to serious financial risk. �7. I understand under California Contractors' State License Law, an Owner -Builder who builds single-family residential structures cannot legally build them with the intent to offer them for sale, unless all work is performed by licensed subcontractors and the number of structures does not exceed four within any calendar year, or all of the work is performed under contract with a licensed general building Contractor. 46�r8. I understand as an Owner -Builder if 1 sell the property for which this permit is issued, I may be he'd liable, for any, financial or personal_ injjuries sustained by any subsequent owners) that result from any latent construction defects in the workmanship or materials. Jr IVK9. I understand I may obtain more information regarding my obligations as an "employer" from the Internal Revenue Service, the United States Small Business Administration, the California Department of Benefit Payments, and the California Division of Industrial Accidents. I also understand I may contact the California Contractors' State License Board (CSSLB) at 1- 800-321-CSLB (2752) or www.csib.ca.gov for more information about licensed contractors. G 10_ I am aware of and consent to an Owner -Builder building permit applied for in my name, and understand that I am the party legally and Ynancially respous;fir proposed construction activity at the following address: T kV11. 1 agree that, as the party legally and financially responsible for this proposed construction activity, I will abide by all applicable laws and requirements that govern Owner -Builders as well as employers. 12. 1 agree to notify the issuer of this form immediately of any additions; deletions, or changes to any of the information I have provided on this form Licensed contractors are regulated by laws designed to protect the public. If you contract with someone who does not have a license, the Contractors' State License Board may be unable to assist you with any financial loss you may sustain as a result of a complaint. Your only remedy against unlicensed Contractors may be in civil court. It is also important for you tounderstand that if an unlicensed Contractor or employee of that individual or firm is injured while working on your property; you may be heldliable for damages. If you obtain a permit as Owner -Builder and wish to hire Contractors, you will be responsible for verifying whether or not those Contractors are properly licensed and the status of their workers' compensation insurance coverage. Before a building permit can be issued, this form must be completed and signed by the property owner and returned to the agency responsible for issui"Ahe..permiL Node: A copy of theproperty owner's driver's1kense, forret rtotaritMIM or other verification acceptable to the agency is req' aired to be presented when die permit is issued to verify the property owner's signature. Signature of property owner Date: Note: The following Authorization Form is required to be completed by the property owner only when designating an agent of the property owner to apply for a construction permit for the Owner -Builder. AUTHORIZATION OF AGENT TO ACT ON PROPERTY OWNER'S BEHALF Excluding the Notice to Property Owner, the execution of which I understandis my personal responsibility, I hereby authorize the following person(s) to act as my agent(s) to apply for, sign, and file the documents necessary to obtain an Owner -Builder Permit for my project. Scope of Construction Project (or Description of Work): Project Location or Address: Name of Authorized Agent: Address of Authorized Agent: Tel No I declare under penalty of perjury that I am the property owner for the address listed above and I personally filled out the above information and certify its accuracy. Note: A copy of the owner's driver's license, form notarization, or other verification acceptable to the agency is required to be presented when the permit is issued to verify the property owner's signature_ Property Owner's Signature: Date: *-AAA PGA WEST FAIRWAY'S ASSOCIATION July 9, 2013 Willford and Kathy Taylor 217 17`h Street Manhattan Beach, CA 90266 Re: Architectural Application — 81140 Golf View Drive Dear Willford and Kathy Taylor: The Architectural Committee :has reviewed your request.for the modification to the rear yard of your residence. I am pleased to inform you that the Architectural Committee has approved the application as submitted. Enclosed is Exhibit C — the Compliance Review Request form. Please complete this form after the work is completed and return it by mail or fax to the address below so the completed project can be inspected. If you have any questions, please contact Cassie Gertz, Operations Manager at 760-776-5100 Ext. 345 or email Cass ie.Gertz cr,Managementtrust.com. Sincerely, For the Architectural Committee PGA WEST Fairways Association CCAM, PCAM ibit C — Compliance Review Request cc: Lot File Architectural Committee Post Office Box 1690 • La Quinta, California 92247 - Phone (760) 776-5100 - Fax (760) 776-5111 CITY* OF LA QUINTA4SUB-CONTR �TOR LI$T . JOB ADDRESS �j��a�//�✓ l///��- PERMIT NUMBER ' •gj$� OWNER n��/� /o•�' BUILDER This form shall be posed on the Job with the Building Inspection Card at all times in a consaicuous place. Only person appearing on this list or their employees are authorized to wor on this job. Any -changes to this list must be approved by -the Building Division prior to commencement of .work. Failure to comply will. result in a stoppage of work and/or the voidanc. of building permit. For each applicable trade, all information requested below must be completed by applicant. "On File" is not an acceptable response. i catio Trade /Class fi n r o - :::. .:.:::.::; Cont act ::<::'>'.':<:>::::.,>;.: ::. :.:•., ::...: . State..Contractot s License ::" <::':' ::::;<; :.: : W.orkeis_Comperlsation:�nsuraoce:°' >:;,.::'::.::_ :Cit . Biisrie s License: y. 5 Company Name Classification (e.g. A, B, C-8) License Number (xxxxxx) Exp. Date (xx/xx/xx) Carrier Name (e.g. State Fund, CalComp) Policy Number (Format Varies) Exp. Date (xx/xx/xx) License Number (xxxx) Exp. Date (xx/xx/xx) EARTHWORK (C-12) .. -8) CONCRETE (C17 FRAMING ;(C-5) .'.: ' O L S/o J S/R l 1 /r oA I / %� C 6 L t�tYy'� (7 / �� l7 A - AV/'r G: n . �S - Ce . G �7a� 6 .3 lol, / L ��U % ii; .2� /Y STRUCT.:STEEL- (C-51) - MASONRY id .2"9) PLUMBING (C -36)- LATH; PLASTER iC=351 r G �ro �l s �l(k o �I C(� ��i% ryi /�Hc YumS : - �'72� �D 3 DRYWALL (C-9).-- L �J/a �1d��.� r / -G Gr��i� /� ��/TPic/Yuvr -Lkt • 4, 5/?�� (rB `� 6 i !3 L1�0 �7 2 ,� l�/y . HVAC. (C-201':... ELECTRICAL. (C=10Y . / Gee '_ 4ZeClr/� L - /0 �l! % Ci pis c�3/ / � iGIC' /rc f � c a.r1 . G (�J K,y �� # /O(r / SHEET.METAL FL0041RING GLAZING (C-17)"> INSULATIOU:(C-2): "..;:. SEWAGE DISP - (G-42). PAINTING (C=33)' ' CERAMIC TILE (C-54) CABINETS (C-6) FENCING (C713) LANDSCAPING (C=27) .; POOL (C-53) • • 0■ um BUILDING ENERGY ANALYSIS REPORT I PROJECT: Taylor Residence Remodel 81-140 Golf View La Quinta, CA 92253 Project Designer: Robert A. Pitchford Design and Drafting 77-622 Country Club Dr. Suite O Palm Desert, Ca 92211 (760) 346-2856 Report Prepared by: Tim Scott Scott Design and Title 24, Inc, 77-085 Michigan Drive Palm Desert, Ca 92211 (760) 200-4780 Job Number: RECEIVED JUL 0;12013 CITY OF LA QUINTA COMMUNITY DEVELOPMENT Date: CITU' OF LA QUINTA BUILDING & SAFETY DEPT. 6/20/2013 APPROVED F® CONSTRU TION The EnergyPro computer program has been used to perform the calculations summarized in this c mplianj�oLngy amapproval andis authorized by the California Energy Commission for use with both the Residential and Nonresid nggl -Cffi a cy Standards. Y This program developed by EnergySoft, LLC — www.energys ftx EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-06-20715:48:17 /D: • uj • • • • PERFORMANCE CERTIFICATE: Residential Part 1 of 5 CF -1 R Project Name Taylor Residence Remodel Building Type m Single Family O Addition Alone ❑ Multi Family ® Existing+ Addition/Alteration Date 6/20/2013 Project Address 81-140 Golf View La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 2,943 Addition 0 # of Stories 1 FIELD INSPECTION ENERGY CHECKLIST ❑ Yes ❑ No HERS Measures -- If Yes, A CF -4R must be provided per Part 2 of 5 of this form. ❑ Yes ❑ No Special Features -- If Yes, see Part 2 of 5 of this form for details. INSULATION Construction Type Area Special Cavity Features see Part 2 of 5 Status Roof Wood Framed Attic R-19 2,943 Existing Wall Wood Framed R-11 683 Existing wall Wood Framed None 1,816 Existing Door Opaque Door None 24 Existing Slab Unheated Slab -on -Grade None 2,943 Perim = 321' Existing FENESTRATION U- Exterior Orientation Area Factor SHGC Overhang Sidefins Shades Status Right (N) 211.9 0.710 0.60 none none Bug Screen Existing Front (E) 148.0 0.710 0.60 none none Bug Screen Existing Left (S) 173.2 0.710 0.60 none none Bug Screen Existing Rear (VV) 90.4 0.710 0.60 none none Bug Screen Existing Rear (W) 328.0 0.710 0.60 none none Bug Screen Removed Rear (W) 118.6 0.550 0.27 none none Bug Screen New HVAC SYSTEMS Ot . Heating Min. Eff Cooling Min. Eff Thermostat Status 2 Central Furnace 80% AFUE Split Air Conditioner 10.0 SEER Setback Existing HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status Existing HVAC Ducted Ducted Attic, Ceiling Ins, vented 4.2 Existing WATER HEATING UI �t�s Qt Type Gallons Min. Eff Distribu it on�yo�A� BUILUI►v 5r~ Ai' FOR CONb EnerqyPfo 5.1 by EnergySoft User Number.- 6712 RunCode: 2013-06-20T15:48:17 J¢: BY ae� of 2 0 0 • PERFORMANCE CERTIFICATE: Residential Part 2 of 5 CF -1 R Project Name Taylor Residence Rem ode/ Building Type ® Single Family ❑ Addition Alone 1 ❑ Multi Family ® Existing+ Addition/Alteration Date 6/20/2013 SPECIAL FEATURES INSPECTION CHECKLIST The enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. HERS REQUIRED VERIFICATION Items in this section require field testing and/or verification by a certified HERS Rater. The inspector must receive a completed CF -4R form for each of the measures listed below for final to be given. _;II nt Q. C t 1 n� uv APPROVED FOR CONST CTION Y . Ene Pro 5.1 b Ene Soft User Number: 6712 RunCode: 2013-06-20715:48:117 IDL Pae of 12 n�JJ98=57AC • C PERFORMANCE CERTIFICATE: Residential Part 3 of 5 CF -1 R Project Name Building Type m Single Family ❑ Addition Alone Date Taylor Residence Rem ode/ ❑ Multi Family m Existing+ Addition/Alteration 6/20/2013 ANNUAL ENERGY USE SUMMARY Standard Proposed Margin TDV kBtu/ftz- r Space Heating 20.60 19.40 1.20 Space Cooling 254.34 222.94 31.40 Fans 46.79 41.19 5.59 Domestic Hot Water 12.75 12.75 0.00 Pumps 0.00 0.00 0.00 Totals 334.47 296.28 38.19 Percent Better Than Standard: 11.4%. BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED Fenestration Building Front Orientation: (E) 90 deg Ext. Walls/Roof Wall Area Area Number of Dwelling Units: 1.00 (E) 726 148 Fuel Available at Site: Natural Gas (S) 880 173 Raised Floor Area: o (tM 764 209 Slab on Grade Area: 2,943 (N) 895 212 Average Ceiling Height: 10.5 Roof 2,943 0 Fenestration Average U -Factor: 0.68 TOTAL: 742 Average SHGC: 0.55 Fenestration/CFA Ratio: 25.2% REMARKS STATEMENT OF COMPLIANCE This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 the Administrative Regulations and Part 6 the Efficiency Standards of the California Code of Regulations. The documentation author hereby certifies that the documentation is accurate and comp) te. Documentation Author Company Scott Design and Title 24, Inc, 620/2013 Address 77-085 Michigan Drive Name Tim Scoff xr City/State/ZipCity/State/Zip Palm Desert, ca 92211 Phone (760) 200-4780 Signed Date The individual with overall design responsibility hereby certifies that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application, and recognizes that compliance using duct design, duct sealing, verification of refrigerant charge, insulation installation quality, and buildin I e se 'ng require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code Company Robert A. Pitchford Design and Drafting � " 1 Address 77-622 Country Club Dr. Suite O Name Robert Pitch City/State/Zip Palm Desert, Ca 92211 Phone (760) 346-2856 -ig d P (R®Vers K D to - —I r V iv EnergyPro 5.1 by Ene Soft User Number: 6712 RunCode: 2013-06-20T15:48:17 1 Pa e 5 • f 12 'FAR 155 •j. 0 • • CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CF -1 R Project Name Taylor Residence Rem ode/ Building Type m Single Family ❑ Addition Alone ❑ Multi Family m Existing+ Addition/Alteration Date 1612012013 OPAQUE SURFACE DETAILS Surface Type Area U- Insulation Joint Appendix Factor Cav*itv7 Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments Roof 2,943 0.049 R-19 0 20 Existing 4.2.1-A4 Altered Residence Wall 683 0.110 R-11 0 90 Existing 4.3.1-A2 Altered Residence Wall 554 0.356 None 90 90 Existing 4.3.1-A1 Altered Residence Door 24 0.500 None 90 90 Existing 4.5.1-A4 Altered Residence Wall 707 0.356 None 180 90 Existing 4.3.1-A1 Altered Residence Wall 555 0.356 None 270 90 Existing 4.3.1-A1 Altered Residence Slab 2,943 0.730 None 0 180 Existing 4.4.7-A1 Altered Residence LEI I I I FENESTRATION SURFACE DETAILS ID Type Area LI -Factor' SHGCz Azm Status Glazing Type Location/Comments 1 Window 21.8 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 2 Window 21.8 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 3 Window 36.5 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 4 Window 23.0 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 5 Window 5.0 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 6 Window 23.0 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 7 Window 21.8 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 8 Window 59.0 0.710 Default 0.60 Default 0 Existing Double Metal Tinted Altered Residence 9 Window 38.0 0.710 Default 0.60 Default 90 Existing Double Metal Tinted Altered Residence 10 Window 48.0 0.710 Default 0.60 Default 90 Existing Double Metal Tinted Altered Residence 11 Window 24.0 0.710 Default 0.60 Default 90 Existing Double Metal Tinted Altered Residence 12 Window 38.0 0.710 Default 0.60 Default 90 Existing Double Metal Tinted Altered Residence 13 Window 8.7 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 14 Window 8.7 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 15 Window 8.7 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 16 Window 8.7 0.710 Default 0.60 Default 180 Existing I Double Metal Tinted Altered Residence (1) U -Factor Type: 116-A = Default Table from Standards, NFRC = Labeled Value 2 SHGC Type: 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t Wd Ove hang Left Fin Right Fin Len H t LExt I RExt Dist Len Hot Dist Len Hot 1 Bug Screen 0.76 2 Bug Screen 0.76 3 Bug Screen 0.76 4 Bug Screen 0.76 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8 Bug Screen 0.76 9 Bug Screen 0.76 10 Bug Screen 0.76 11 Bug Screen 0.76 . 12 Bug Screen 0.76 13 Bug Screen 0.76 14 Bug Screen 0.76 15 Bug Screen 0.76 v 16 JBug Screen 0.76 FOR CONS R Ene Pro 5.1 b Ene Soft User Number.' 6712 RunCode: 2013-06-20T15:48:17 I ID: Page 6 of 2 11 • 0 CERTIFICATE OF COMPLIANCE: Residential Part 4 of 5 CF -1 R Project Name Taylor Residence Remodel Building Type m Single Family O Addition Alone O Multi Family m Existing+ Addition/Alteration Date 1612012013 OPAQUE SURFACE DETAILS Surface U- Insulation Joint Appendix Type Area Factor Cavity7Exterior Frame Interior Frame Azm Tilt Status 4 Location/Comments 1E FENESTRATION SURFACE DETAILS ID Type Area Ll -Factor' SHGC Azm Status Glazing Type Location/Comments 17 Window 3.1 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 18 Window 22.9 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 19 Window 22.9 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 20 Window 22.9 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 21 Window 46.6 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 22 Window 20.0 0.710 Default 0.60 Default 180 Existing Double Metal Tinted Altered Residence 23 Window 45.2 0.710 Default 0.60 Default 270 Existing Double Metal Tinted Altered Residence 24 Window 45.2 0.710 Default 0.60 Default 270 Existing Double Metal Tinted Altered Residence 25 Window 72.0 0.710 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 26 Window 8.0 0.710 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 27 Window 72.0 0.710 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 28 Window 8.0 0.710 1 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 29 Window 80.0 0.710 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 30 Window 8.0 0.710 Default 0.60 Default 270 Removed Double Metal Tinted Altered Residence 31 Window 18.6 0.550 NFRC 0.27 NFRC 2701 New Dual Metal Tint Altered Residence 32 Window 80.0 0.710 Default 0.60 1 Default 2701 Removed Double Metal Tinted I Altered Residence (1) U -Factor Type: 2 SHGC Type: 116-A = Default Table from Standards, NFRC = Labeled Value 116-B = Default Table from Standards, NFRC = Labeled Value EXTERIOR SHADING DETAILS ID Exterior Shade Type SHGC Window H t TWd Ove hanq Left Fin Ri ht Fin Len I H t LExt RExt Dist Len H t Dist Len H t 17 Bug Screen 0.76 18 Bug Screen 0.76 19 Bug Screen 0.76 20 Bug Screen 0.76 21 Bug Screen 0.76 22 Bug Screen 0.76 23 Bug Screen 0.76 24 Bug Screen 0.76 25 Bug Screen 0.76 26 Buo Screen 0.76 27 Bug Screen 0.76 28 Bug Screen 0.76 _ 29 Bug Screen 0.76 f ` , _ ,- . r Iltsl 30 Bu Screen 0.76 ' 31 Bu Screen 0.76 1 1 1r n Ifs 1 32 Bu Screen 0.76 M ,... FOR CONSTpUCTION EnergyPro 5.1 by Enemvsoft User Number: 6712 RunCode: 2013-06-20715:48:17 ID: Page 7 of 2 • • 0 CERTIFICATE OFCOMPLIANCE: Residential (Part 4 , Project Name ,Taylor Residence Rem ode/ Building Type 0 Single Family 0 Addition Alone 0 Multi Family 0 Existing+ Addition/Alteration OEM OPAQUE KEE) Joint Appendix 4 Location/Comments FENESTRATION SURFACE DETAILS ocation/Comments Dual Metal Tint Altered Residence ... . -. Iff-I 11 EXTERIOR��Mafz=�� DETAILS Exterior Shade Type— am]t � .d-WTl:i_87tm OR CONS WNr ? -..-:.m guar "I PO i r� • • CERTIFICATE OF COMPLIANCE: Residential Part 5 of 5 CF -1 R Project Name Taylor Residence Rem ode/ Building Type ® Single Family ❑ Addition Alone ❑ Multi Family m Existing+ Addition/Alteration Date 1612012013 BUILDING ZONE INFORMATION System Name Zone Name New Floor Area Existina Altered I Removed Volume Year Built Existing HVAC Altered Reidence 2,943 30,902 1975 Totals 01 2,943 0 0 HVAC SYSTEMS System Name Qty. Heating Type Min. Eff. Cooling Type Min. Eff. Thermostat Type Status Existing HVAC 2 Central Furnace 80 % AFUE Split Air Conditioner 10.0 SEER Setback Existing HVAC DISTRIBUTION System Name Heating Cooling Duct Duct Location R -Value Ducts Tested? Status Existing HVAC Ducted Ducted Attic, Ceiling Ins, vented 4.2 ❑ Existing ❑ WATER HEATING SYSTEMS S stem Name Qty. Type Distribution Rated Input (Btu h) Tank Cap. al Energy Factor or RE Standby Loss or Pilot Ext. Tank Insul. R- Value Status Standard Gas 50 gal or Le 1 Small Gas No Pipe Insulation 40,000 50 0.57 n/a n/a Existing MULTI -FAMILY WATER HEATING DETAILS HYDRONIC HEATING SYSTEM PIPING Control Hot Water Piping Length ft o 0Pipe <— System Name Len th Pipe Diameter Insul. Thick. Oty. HP Plenum Outside Buried ❑ G I �-, ❑ >z DEP - ❑ ' 110-1 Ene Pro 5.1 b Ene Soft User Number: 6712 RunCode: 2013-06-20T15: 8:17 r Pa 9 of 12 LDATE2L]��[( B , • 0 • MANDATORY MEASURES SUMMARY: Residential Pae 1 of 3 MF -1 R Project Name Taylor Residence Rem ode/ Date 6/20/2013 NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the compliance approach used. More stringent energy measures listed on the Certificate of Compliance (CF -1 R, CF -1 R -ADD, or CF - 1 R -ALT Form) shall supersede the items marked with an asterisk (`) below. This Mandatory Measures Summary shall be incorporated into the permit documents, and the applicable features shall be considered by all parties as minimum component performance specifications whether they are shown elsewhere in the documents or in this summary. Submit all applicable sections of the MF -1 R Form with plans. Building Envelope Measures: 116(a)l: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. §116(a)4: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, certified Solar Heat Gain Coefficient SHGC and infiltration that meets the requirements of 10-111 (a). 117: Exterior doors and windows are weather-stripped; all joints and penetrations are caulked and sealed. 118(a): Insulationspecified or installed meets Standards for Insulating Material. Indicate type and include on CF -6R Form. §118(i): The thermal emittance and solar reflectance values of the cool roofing material meets the requirements of §118(i) when the installation of a Cool Roof is specified on the CF -1 R Form. 150(a): Minimum R-19 insulation in wood -frame ceiling orequivalent U -factor. 150(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -Value. *§1 50 c : Minimum R-13 insulation in wood -frame wall orequivalent U -factor. *§150(d): Minimum R-13 insulation in raised wood -frame floor orequivalent U -factor. §150(f): Air retarding wrap is tested labeled and installed according to ASTM E1677-95(2000) when specified on the CF -1 R Form. §150(g): Mandatory Vapor barrier installed in Climate Zones 14 or 16. §150(1): Water absorption rate for slab edge insulation material alone without facings is no greater than 0.3%; water vapor permeance rate is no greater than 2.0perm/inch and shall be protected from physical damage and UV light deterioration. Fireplaces, Decorative Gas Appliances and Gas Log Measures: 150 a 1A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. §150(e)1 B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a with a readily accessible, operable, and tight -fitting damper and or a combustion -air control device. §150(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the --outside of the building,are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: .§110-§113: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certified by the Energy Commission. §113(c)5: Water heating recirculation loops serving multiple dwelling units and High -Rise residential occupancies meet the air release valve backflow prevention, pump isolation valve, and recirculation loop connection requirements of § 1 13 c 5. §115: Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appliances with an electrical supply voltage connection with pilot lights that consume less than 150 Btu/hr are exempt), and pool and spa heaters. §150(h): Heating and/or coolinq loads are calculated in accordance with ASHRAE, SMACNA or ACCA. 150(i): Heating systems are equipped with thermostats that meet the setback requirements of Section 112(c). §1506)1 A: Storage gas water heaters rated with an Energy Factor no greater than the federal minimal standard are externally wrapped with insulation having an installed thermal resistance of R-12 or greater. §1500)1 B: Unfired storage tanks, such as storage tanks or backup tanks for solar water -heating system, or other indirect hot water tanks have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. "§1506)2: First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire length of sections of hot water pipes are insulated per Standards Table 150-B. _,-recirculating §1500)2: Cooling system piping (suction, chilled water, or brine Iines),and piping insulated between heating source and indirect hot tank shall be insulated to Table 150-B and Equation 150-A. _-water §1506)2: Pipe insulation for steam hydronic heating systems or hot water systems >15 psi, meets the requirements of Standards Table -123-A. 150(j)3A: Insulation is protected from damage, including that due to sunlight, moisture equipment maintenance and_win §1 500)3A: Insulation for chilled water piping and refrigerant suction lines includes a vapor-retardant-oreo�MiblY T conditioned space. T 150 ' 4: Solar water-heatin s stems and/or collectors are certified b the Solar Ratin and, Certificatio Cg • , a io�in. APpROVEDOTihi ►v EnergyPro 5.1 by EnergySoft User Number: 6712 RunCode: 2013-06-20715:48:17 rD Page 10 of A& MANDATORY MEASURES SUMMARY: Residential (Page 2 of 3 MF -1 R Project Name Date Taylor Residence Remodel 1612012013 §150(m)1: All air -distribution system ducts and plenums installed, are sealed and insulated to meet the requirements of CMC Sections 601, 602, 603, 604, 605 and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minimum installed level of R- 4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings reater than 1/4 inch, the combination of mastic and either mesh or tape shall be used §150(m)1: Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. §150(m)2D: Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes ..unless such tae is used in combination with mastic and draw bands. 150(m)7: Exhaust fans stems have back draft or automatic dampers. §150(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated dampers. '•§150(m)9: Insulation shall be protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar -radiation that can cause degradation of the material. 150 m 10: Flexible ducts cannot have porous inner cores. §150(o): All dwelling units shall meet the requirements of ANSI/ASHRAE Standard 62.2-2007 Ventilation and Acceptable Indoor Air Quality in Low -Rise Residential Buildings. Window operation is not a permissible method of providing the Whole Building Ventilation required in Section 4 of that Standard. Pool and Spa Heating Systems and Equipment Measures: §114(a): Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency Regulations; an on-off switch mounted outside of the heater; a permanent weatherproof plate or card with operating instructions; and shall not use electric resistance heating ora pilot light. §114(b)1: Any pool or spa heating equipment shall be installed with at least 36" of pipe between filter and heater, or dedicated suction and return lines, or built-up connections for future solar heating. 114(b)2: Outdoor pools ors as that have a heat pump or gas heater shall have a cover. §114(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or programmed to run only during off-peak electric demand periods. _§150(p): Residential pool systems orequipment meet the pump sizing, flow rate, piping, filters, and valve requirements of §150(p). Residential Lighting Measures: T1 50(k)1: High efficacy luminaires or LED Light Engine with Integral Heat Sink has an efficacy that is no lower than the efficacies contained in Table 150-C and is not a low efficacy luminaire asspecified by §150(k)2. 150(k)3: The wattage of permanently installed luminaires shall be determined asspecified by §130(d). §150(k)4: Ballasts for fluorescent lamps rated 13 Watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. §150(k)5: Permanently installed night lights and night lights integral to a permanently installed luminaire or exhaust fan shall contain only high efficacy lamps meeting the minimum efficacies contained in Table 150-C and shall not contain a line -voltage socket or line - _voltage lamp holder; OR shall be rated to consume no more than five watts of power as determined by §130(d), and shall not contain a medium screw -base socket. -.§1 50 k 6: Lighting integral to exhaust fans, in rooms other than kitchens, shall meet the applicable requirements of §150(k). 150(k)7: All switching devices and controls shall meet the requirements of §150(k)7. ..§150(k)8: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. :EXCEPTION: Up to 50 watts for dwelling units less than or equal to 2,500 ft2 or 100 watts for dwelling units larger than 2,500 ft2 may be exempt from the 50% high efficacy requirement when: all low efficacy luminaires in the kitchen are controlled by a manual on occupant sensor, dimmer, energy management system (EMCS), or a multi -scene programmable control system; and all permanently installed luminaries in garages, laundry rooms, closets greater than 70 square feet, and utility rooms are high efficacy and controlled by a manual -on occupant sensor. §150(k)9: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power peer l eaLfoot of illuminated cabinet. .-rtei r CiTY BUILDING & SAFETY DEP APPROVED CONSTR CTION _FOR EnergyPro 5.1 by EnergySoR User Number: 6712 RunCode: 2013-06-20715:48:17 ID: 1 1. JPOge 11 of 12 1� MANDATORY MEASURES SUMMARY: Residential (Page 3 of 3 MF -1 R Project Name Date Taylor Residence Rem ode/ 6/20/2013 §150(k)l0: Permanently installed luminaires in bathrooms, attached and detached garages, laundry rooms, closets and utility rooms shall be high efficacy. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by a manual -on occupant sensor certified to comply with the applicable requirements of §119. EXCEPTION 2: Permanently installed low efficacy luminaires in closets less than 70 square feet are not required to be controlled by a manual -on occupancy sensor. §150(k)l 1: Permanently installed luminaires located in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, -closets, and utility rooms shall be high efficacy luimnaires. EXCEPTION 1: Permanently installed low efficacy luminaires shall be allowed provided they are controlled by either a dimmer switch that complies with the applicable requirements of §119, or by a manual - on occupant sensor that complies with the applicable requirements of §119. EXCEPTION 2: Lighting in detached storage building less ..than 1000 square feet located on a residential site is not required to comply with 4150 k 11. §150(k)l2: Luminaires recessed into insulated ceilings shall be listed for zero clearance insulation contact (IC) by Underwriters .Laboratories or other nationally recognized testing/rating laboratory; and have a label that certifies the lumiunaire is airtight with air leakage less then 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; and be sealed with a gasket or caulk between the luminaire housing and ceiling. §150(k)13: Luminaires providing outdoor lighting, including lighting for private patios in low-rise residential buildings with four or more dwelling units, entrances, balconies, and porches, which are permanently mounted to a residential building or to other buildings on the same lot shall be high efficacy. EXCEPTION 1: Permanently installed outdoor low efficacy luminaires shall be allowed provided that they are controlled by a manual on/off switch, a motion sensor not having an override or bypass switch that disables the motion sensor, and one of the following controls: a photocontrol not having an override or bypass switch that disables the photocontrol; OR an astronomical time clock not having an override or bypass switch that disables the astronomical lime clock; OR an energy management control system (EMCS) not having an override or bypass switch that allows the luminaire to be always on EXCEPTION 2: Outdoor luminaires used to comply with Exceptionl to §150(k)13 may be controlled by a temporary override switch which bypasses the motion sensing function provided that the motion sensor is automatically reactivated within six hours. EXCEPTION 3: Permanently installed luminaires in or around swimming pool, water features, or other location subject to Article 680 of the California Electric Code need not -be high efficacy luminaires. §150(k)14: Internally illuminated address signs shall comply with Section 148; OR not contain a screw -base socket, and consume no -more than five watts of power as determined according to §130(d). §150(k)l5: Lighting for parking lots and carports with a total of for 8 or more vehicles per site shall comply with the applicable requirements in Sections 130, 132, 134, and 147. Lighting for parking garages for 8 or more vehicles shall comply with the applicable requirements of Sections 130, 131, 134 and 146. §150(k)l6: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more dwelling units shall be high efficacy luminaires. EXCEPTION: Permanently installed low efficacy luminaires shall be allowed provided that they are controlled by an occupant sensors certified to comply with the applicable requirements of 119. CITY ®F LA QUINTA BDILDIIVG &SAFE TY DEPT rp VE P"PPROVEn - EnergyPro 5.1 by EnergySoR User Number. 6712 RunCode: 2013-06-20T15:48:17 ID: lalUCTJ, e 12 of 12 DgTF __�►�C /f �