06736 (SFD)P.O. BOX 1504
Building 78-105 CALLE ESTADO
Address 51`585 E"evhover LA QUINTA, CALIFORNIA 92253
Owner
fftd Zublic
Mailing
Address "
City Zip
Zip Tel.
State Lic. I City
& Classif. Lic. #
Arch:, Engr.,
Designer
Address Tel.
s.
CityI Zip I State I
Lic. #
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section
7000) of Division 3 of the Business and Professions Code, and my license is in full force and
effect. c! n ,^. rt.Y, `.' f' •-, /' ,' •--'�,,• _..-.
SIGNATURE DATE
OWNEWBUILDER DECLARATION
A hereby affirm that I am exempt from the Contractor's License Law for the following
reason: (Sec. 7031.5,Busfness and Professions Code: Any city or county which requires a
permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance also
requires the apprxant for such permit to rile a signed statement that he Is licensed pursuant to
the provisions or the Contractor's License Law, Chapter 9 (commencing with Section 7000) of
Division 3 of the Business and Professions Code, or that. he is exempt therefrom, and the basis
for the alleged exemption. Any violation or Section 7031.5 by any applicant for a permit
subjects the applicant to a ciwl penalty of not more than rive hundred dollars ($500).
❑ I, as owner of the property, or my employees with wages as their sole compensation, will
do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and
Professions Code: The Contractor's License Law does not apply to an owner of property who
builds or improves thereon and who does such work himself or through his own employees,
provided that such improvements are not intended or offered for sale. If, however, the budding
or improvement is sold within one year of completion, the owner -builder will have the burden
of proving that he did not build or improve for the purpose of sale.) . ,
❑ I, as owner of the property, am exclusively contracting with licensed contractors to con
struct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law
does not apply to an owner or property who builds or Improves thereon, and who contracts for
such projects with a contractor(s) licensed pursuant to the Contractor's License Law.)
❑ 1 am exempt under Sec. B. & P.C. for this reason
Date owner
WORKERS' COMPENSATION DECLARATION
I hereby affirm that I have a certificate of consent to self -insure, or a certificate of
Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.)
Policy No. Company
O Copy. is filed with the city. ❑ Certified copy is hereby furnished. -
CERTIFICATE OF EXEMPTION FROM
WORKERS' COMPENSATION INSURANCE
(This section need not be completed it the permit is for one hundred dollars ($100) valuation
or less.)
I certify that in the performance of the work for which this permit is issued, I shall not
employ any person in any manner so as to become subject to the Workers' Compensation
Laws of California.
Date owner
NOTICE TO APPLICANT: 11, alter making this Certificate or Exemption you should become
subject to the Workers' Compensation provisions of the Labor Code, you must forthwith
comply with such provisions or this permit shall be deemed revoked.
CONSTRUCTION LENDING AGENCY
Ihereby affirm trial there is a construction lending agency. for the performance of the
work for which this permit is issued. (Sec. 3097, Civil Code.)
Lender's Name
Lenders Address
This is a building permit when properly filled out, signed and validated, and is subject to
expiration if work thereunder is suspended for 180 days.
I certify that I have read this application and state that the above information is correct.
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives -of this city to enter the above-.
mentioned property for inspection purposes.
Signature of applicant Date
Mailing Address
City,. State, Zip
No. 06736
BUILDING: TYPE CONST. OCC: GRP. -
A.P. Number 773-134--015 LUT .�
Legal Description
Project Description .
Sq. Ft.
Size 1730
No. No. Dw.
Stories Units
New ❑ Add ❑
Alter ❑ Repair ❑ Demolition ❑
Estimated Valuation
$97,611
PERMIT
AMOUNT
Plan Chk. Dep.
$250.00
Plan Chk. Bal.
283.10
Const.
630.50
Mech.
53.50
Electrical
118..19
Plumbing
157.$0
S.M.I.
6.86
Grading
20.00
Driveway Enc.
20.00
Infrastructure
2,158.01
TOTAL
$.697.66
REMARKS
.5i' o
�
' .ti. Lt._•. iia .2 f!- i- rt.)i♦4i. 1 v`3 'JY,..v
ZONE: BY:
Minimum Setback Distances:
Front Setback from Center Line
Rear Setback from Rear Prop. Line
Side Street Setback from Center Line
Side Setback from Property Line
FINAL DATE INSPECTOR
12/12/89
Issued by: Date Permit
Validated by:
Validation:
CONSTRUCTION ESTIMATE
NO. ELECTRICAL FEES
NO. PLUMBING FEES
1ST FL. SQ. FT. ® $
UNITS
SLAB GRADE % 3 0' r✓
ROUGH LUM
BONDING
YARD SPKLR SYSTEM
2ND FL SQ. FT.
FORMSS
IC AW
ROUGH WIRING
MOBILEHOME SVC.
BAR SINK
POR. SQ, FT. ®
GAS (ROUGH) ///19/?/
METER LOOP
GAR. SQ. FT. ®
POWER OUTLET
ROOF DRAINS
GAS (FINAL) "19A,TEMP.
POLE
DRAINAGE PIPING
CAR P. I SQ. FT.
GROUT
WATER HEATER
WALL SQ. FT.
FINAL INSP.
DRINKING FOUNTAIN
BOND BEAM
WATER SYSTEM
FINAL INSP.
URINAL
FT ®
LUMBER GR.
ESTIMATED CONSTRUCTION VALUATION $
ROOFING
WATER PIPING
NOTE: Not to be used as property tax valuation
FLOOR DRAIN
MECHANICAL FEES
WATER SOFTENER
VENT SYSTEM FAN EVAP.COOL HOOD
SIGN
WASHER(AUTO)(DISH)
APPLIANCE DRYER
GARBAGE DISPOSAL
FURNACE UNIT WALL FLOOR SUSPENDED
LAUNDRY TRAY
AIR HANDLING UNIT CFM
KITCHEN SINK
ABSORPTION SYSTEM B.T.U.
TEMP USE PERMIT SVC
WATER CLOSET
COMPRESSOR HP
POLE, TEM/PERM
LAVATORY
HEATING SYSTEM FORCED GRAVITY
AMPERES SERV ENT
SHOWER
BOILER B.T.U.
SQ. FT. ® c
BATH TUB
SO. FT. ® c
WATER HEATER
MAX. HEATER OUTPUT, B.T.U.
SQ. FT. RESID ® 11/4 c
SEWAGE DISPOSAL
SQ.FT.GAR ® V4c
HOUSE SEWER
FINAL INSPECTIONAt
GAS PIPING
PERMIT FEE
PERMIT FEE
PERMIT FEE
DBL
TOTAL FEES
MICRO FEE
MECH.FEE PLCK.FEE
CONST. FEE ELECT. FEE
SMI FEE PLUMB. FEE
STRUCTURE PLUMBING ELECTRICAL HEATING 6 AIR COND. SOLAR
SETBACK 7 3
GROUND PLUMBING? O
UNDERGROUND
A.C. UNIT
COLL. AREA
SLAB GRADE % 3 0' r✓
ROUGH LUM
BONDING
HEATING (ROUGH)
STORAGE TANK
FORMSS
IC AW
ROUGH WIRING
DUCT WORK
ROCK STORAGE
FOUND. REINF.
GAS (ROUGH) ///19/?/
METER LOOP
HEATING (FINAL)
OTHER APPJEQUIP.
REINF. STEEL
GAS (FINAL) "19A,TEMP.
POLE
GROUT
WATER HEATER
SERVICE
FINAL INSP.
BOND BEAM
WATER SYSTEM
FINAL INSP.
FINAL INSP. O
$
GRADING
cu. yd.
-Plus-x$-=$
LUMBER GR.
FRAMING
ROOFING
�
`/%C'�
S
d
p
���A
Jfl 0o
REMARKS:
VENTILATION
FIRE ZONE ROOFING
FIREPLACE
SPARK ARRESTOR
GAR. FIREWALL
_ O /
LATHING
MESH
INSULATIONISOUND 6
FINISH GRADING
FINAL INSPECTIONAt
CERT. OCC.
FENCE FINAL
INSPECTOR'S SIGNATURESIINITIALS'
GARDEN WALL FINAL
'1_-�. �� �-,L ..-•-•�:��.�-���cs"'�r+,-_�.��i.Y"'tr��+L�'I:•Ar"�.'���7ryi,'4!'vl�. . i,i�- �"-.. •�:i-i-_.. j•...i[,.-�-+�, t" _ •,--�' •�+ � .-."�
/If UV O / 0 �a �UY Date/
RECEIPT NO. Issued By
DISTRICT: ❑ Riverside, ❑ Indio ❑ Hemet q Perris ❑ Rancho Calif. ❑ Blythe
DOH -SAN -122 (Rev. 7/89) DISTRIBUTION: WHITE - Office file YELLOW - Applicant PINK - Bldg. Dept GOLDENROD - Plans/Records
COUNTY OF RIVERSIDE ENVIRONMENTAL Asefteors moral No.
HEALTH SERVICES DIVISION
PERMIT APPLICATION FOR A SUBSURFACE SEWAGE DISPOSAL SYSTEM
Applicant: Submit this form with four copies of a scaled plot plan (1-20 scale) drawn to County speculations as indicated on the attached check list
A non-refundable filing fee (see below) is required when the application is submitted. Check must be made payable to the County of
Riverside. Approval of this application shall remain valid for a period not to exceed one year from date of approval.
Q
VERIFY ITEMS IN SECTION A FROM BUILDING & SAFETY APPLICATION BUILDING DEPARTMENT APPLICATION LOG #
Z
�
t, Contractor, Contact Person
&Firm j�ES"�,43Z<• S�•N.�,..r4DDY2�%,
67r
b/g-GIbM/ -/A/
EAddress
Owner
Phone
Mailing Address 5i-c�a� G�YLYtAr.\7^Jk•
U)
TJ D zU �z i L
- T
LA tsar l �+-rc► , ca q zzs 3
City
State
Zip
Job Property Address
Legal Description Prop. (PM, Tract, Lot)
Ldo2wA 1 P\TA
'9'Z-rJ 3
LoMr 4 G= 15Ly— ) IS U N n
Lot Size
Water Agency/Well
Use of Perron P/P, CU, etc.
4-&k►FA G,e mA+ k rA- T"e-T
ts-r vert- l�Caut►.\7'A.
S 001
nDw.11ingMH Site Prep, etc.
—e) —BO
L
Signature of Applicant
Date
CATEGORY: REV CODE FEE
CATEGORY: REV CODE FEE
SUBSURFACE DISPOSAL 1238 $ 57.00
❑ SITE EVALUATION UPON REQUEST 7349 $ 43.00
m
❑ MULTIPLE PARCELS WITHIN SAME
(NO PLOT PLAN)
LAND DIVISION
❑ SEWER/SEPTIC VERIFICATION 7348 $ 17.00
Z
O
a. 1 st 4 Parcels (Each) 1238 $ 57.00
(Less than 1 year)
b. Each Parcel after 4 7344 $ 24.00
❑ PRELIMINARY ELECTIVE 7352 $ 23.00
W
❑ Rereview (2nd review same parcel) 7344 $ 24.00
EVALUATION (Attach DOH SAN 53)
CO'
❑ Site Evaluation in Conjunction with
❑ HOLDING TANK 7351 $ 47.00
Critical Area 7346 $111.00
❑ ALTERNATIVE/EXPERIMENTAL 7345 $222.00
❑ Site Evaluation Lot Less than
SYSTEM
10,000 Sq. Ft. 7347 $ 87.00
DATE
r^INITIAL
t
Holding Tank Agreements Completed - ❑ Yes 0 No 1
Certification of Existing S.D. System Required ❑ Yes ❑ No
WQCB Clearance required. (Attach Form ❑ Yes ❑ No
DOH SAN 007, Santa Ana Region Only)
Solis Percolation Report Required. ❑ Yes ❑ No
Special Feasibility Boring Report Required. ❑ Yes No 7'
Detailed Contour Plot Plans Required (1 to 5 ft. interval) ❑ Yes No
Other ❑ Yes No
Staff Specialist Lot Inspection Required ❑ Yes No
Lot Inspection Dads
Soils boring report by �/ �2 Project Date
l T
Soils Map Page Soil Type Approved by Date
0
No. of Systema
Type of System(s)
No. Dwelling Unita
(1) Septic Tank
Soil Rate
Grease/Sand
Z
❑ Holding Tank ❑ Existing
Bedrooms, Fixture Unita
7,k 2
"'(
Grease IntcpO
New ❑ Replacement
&aX
a
j
GelU
UJ
U)
�
(2) Leech Line Sq. FL .
Sidewall allowarice
Install Line(s) ft long �.f with
Leach Bed eq.
Bottom trench
_ fL rook/ sq. fL
min. inches rode below It or
of bolt
per running ft.
NA
Leachlines/bed special design for slope:
(3) Pit Diameter
No. Pita
Pit Below
Seepage Pith Total Depth
Other.
bl
Applicae
Inlet (BI)
(TD) 4'µ P -
Max. AI owaFDepth
N/A _,X_ Overburden factor
❑ 5 !0 6
U/,
ff''
No. 2 System
REMARKS: C r�
�/ �-
Pe
0 (S u r7 f PP /c e /S 111-1
This application i APPROVE /DENIED for the category checked in SECTION B above; regarding the design of a subsurface disposal system as indicated
on the accompa plan, using the requirements set forth in SECTION C above. A building permit is necessary for the installation of the
Z
above -designed system. No construction is permitted in the required reserved 100% expansion area.
0(1
Septic tank and sewer lines,must be 50' minimum from any wells
F-
2 Leach lines must be 100' minimum from any wells, including expansion area
UJ
(3 Seepage pits must be 150' minimum from any wells, including expansion area
C/)
Le I
Signature of Health Offx:ial Date
/If UV O / 0 �a �UY Date/
RECEIPT NO. Issued By
DISTRICT: ❑ Riverside, ❑ Indio ❑ Hemet q Perris ❑ Rancho Calif. ❑ Blythe
DOH -SAN -122 (Rev. 7/89) DISTRIBUTION: WHITE - Office file YELLOW - Applicant PINK - Bldg. Dept GOLDENROD - Plans/Records
III 111,1 Uf
A�iuc:vl. i WAL mmISSIOMLll
�VI:IC;1`I 15���h'1la�SUlt1:5
1i9-61� IINr 116 Ilnite II -12
Concl�elln� CA 921')6
619-J42-0'191
ll�3D—S9 -
�e� z
1Jk,VCLAJU1;. lift! 1 W 1 t
/��111tE55 �
1-3z
E. !Eat+ SI'nttGY
to••��nwu:•tn
)n�If.S U V:nt.1At:F.
ILLUME?11 UF.NvEhI51E
st.utn
�� —
'l•r•.L,Grin.)1•ICI 1 �. �—
s 3 C3
War vevelUper1 •
1lttllt 1031erlal listed In lwt 1.11
)After teviewilly your 10110scttllllxl 11101111, t1t1 i lE subst•ltutivtls
11t nclleria, ,sled, tills uLElce must be 11vtiEied
Vit)lat1UI1 vE yt1a:Ul1t1118 ltl'4s %p el.1111►y tint CU,cllella valley.
dv occur told ti►ey dLEEer ELL"' I
bluedlately.
U1 UIId 11Eeservllly llle Coachella) valley's East -[gee ellvirv1111L'nt.
'111a1tk you Lor protect y
nyx cul.tutal �anl
11g8�011 t �Ce
CCI 111d1v alld Itiverslde UEE1ce
Point System Summary: Climate Zone 15 P -2R
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Project Title:
Stein
Date:
11/29/89
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Building Data
Glass Area
% Glass
Conditioned Floor Area:
1730.00
North
77.28
4.47
Number of Stories:
One
East
45.00
2.60
Slab/Raised Floor:
Slab
South
24.00
1.39
Single Family Detached (X)
West
33.00
1.91
Single Family Attached t )
Skylight
0.00
0.00
Multi -Family ( )
Totals:
179.28
10.36
Addition Alone ( )
Existing Building ( )
Existing Plus Addition ( >
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Score Card
Point
Scores
1. Ceiling Insulation
R:
30.00
U:
-2.00
2. Wall Insulation
R:
19.00
U:
0.00
3. Raised Floor Insulation
R:
0.00
U:
0.00
4. Slab Edge Insulation
R:
0.00
U:
0.00
5. Infiltration: Standard
6. Glass Heat Loss Type: Double
U: 0.65
% Glass
10.36
7.00
5.00
Sum
1-6
7. Shading (Shade Open)
Glass
X SC= Eff. %
Glass
a. North
4.47
.77
3.44
-1.00
b. East
2.60
.77
2.00
0.00
c. South
1.39
.77
1.07
0.00
d. West
1.91
.77
1.47
0.00
e. Skylight
0.00
.77
0.00
0.00
8. Shading (Shade Closed)
SC=
.48 White
Drape
a. North
4.47
.48
2.14
0.00
b. East
2.60
.48
1.25
1.00
c. South
1.39
.48
.67
2.00
d. West
1.91
.48
,.92
2.00
e. Skylight
0.00
.48
0.00
0.00
9. Interior Thermal Mass
4.20
-1.00
10.Exterior Wall Mass
0.00
0.00
3.00
Heating System (SE X Duct Ef=Eff SE)
SE X
Duct Eff = Eff
SE
Sum
7-10
Zonal Control? No
.72
.78
.56
0.00
Cooling System
Zonal Control? No SEER=
9.20
-3.00
Water Heating Type: Storage Gas
Credit:
None
0.00
Point Total
5.00
Certificate of Compliance: Residential (Page 1 of 2) CF -1R
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Project Title: Stein Project Address: La'9uinta Date: 11/29/89
Documentation Author: Residential Energy Consultants Telephone: (714) 659 5826
Compliance Method: Point System Climate Zone: 15
Building Permit # Checked by: Date:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
General Information
Total Conditioned Floor Area (S9.Ft.) 1730.00
Building Type: (X) Single Family ( ) Hotel/Motel
( ) Multi -Family ( ) Addition
( ) Existing Plus Addition
Front Entry Orientation: South
Number of Dwelling Units:One
Floor Construction Type: Slab
Infiltration: Standard
Building Shell Insulation
Component Insulation Location/ Comments
Type R -Value (attic, typical, etc.)
Wall
19
typical fiberglass batts in studs
Roof
30
typical fiberglass
batts in rafters
Floor
0
Slab Edge
0
Glazing
Glazing
Area
Glass Type
Shading Devices Overhang
Framing Type
Orientation
(Sq.Ft.)
(double)
Interior Exterior (yes/no)
(metal/wood)
Front (S)
24.00
Double
White Drape None no
Metal
Left (W)
33.00
Double
White Drape None no
Metal
Rear (N)
77.28
Double
White Drape None no
Metal
Right (E)
45.00
Double
White Drape None no
Metal
Skylight
0.00
Double
Metal
Thermal Mass
Type/Covering
Area
Thickness
Location/Description
(slab/tile)
(Sq.Ft.)
Inches
(kitchen,bath,etc.)
Type I:Tile
440.00
3.50
Entry/Bath/Kitchen/Matr. Closet/Laundry
Type II:Carpet
1290.00
3.50
Rest of the House
CERTIFICATE OF
COMPLIANCE: RESIDENTIAL
(page 2 of 2)
CF -1R
Project Title:
---------------------------------------------------------------------
Stein
Date:
11-30-89
HVAC SYSTEMS:
Minimum Duct
Type(furnace, Efficiency Location Duct Output Mfgr/Model#
a/c, hp, etc)(SE,SEER,HSPF)(attic,etc) R -Value (Btuh) (or apvd equal)
------------ ---------------------------- ---- -------------
Furnace .72 attic 2.1 75000
Air conditioner 9.20 SEER attic 2.1
Maximum Furnace Heating Output: 75000 Btuh
HOT WATER SYSTEMS:
Tank Manufacturer/Model#
System Type Capacity (or approved equal) Special Feature(s)
-------------------------------------- ------------------
Storage 40 American R-12
SPECIAL FEATURES/REMARKS: None
COMPLIANCE STATEMENT:
This certificate of compliance lists the building features and perform-
ance specifications needed to comply with Title 24, Chapter 2-53 and
Title 20,. Chapter 2, Subchapter 4, Article 1 of the California Admin-
istrative code. This certificate has been signed by the individual
with overall design responsibility and the building owner, who shall
retain a copy of it and transmit the certificate to any subsequent
purchaser of the building. When this certificate of compliance is
submitted for a single building plan to be built in multiple
orientations, all building conservation features which vary are
indicated in the Special Features/Remarks section.
DESIGNER:
5
(signature) (date)
DOCUMENTATION AUTHOR:
William J. Finnell #473969
Residential Energy Consultants
Indian Hills Box 34F
Mountain Center, CA 92361
714-659-3961
(signature) (date)
BUILDING OWNER:
W --- �_
(signature) (date)
ENFORCEMENT AGENCY:
Name:
Title:
Agency:
Telephone:
(signature/stamp) (date)
Calculation Procedures A, B, C, D for Manual J
Procedure A: Summer Infiltration for Entire House
1. Air Changes/Hour per Table 5 = .40 AC/HR.
2. Volume of Conditioned Space = Floor Area X Ceiling Height
1730.00 X 8.00 = 13840.00 Cu. Ft.
3. Total Infiltration .40 X 13840.00 X .02 = 92.45 CFM
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure B: Summer Infiltration Htm For Windows and Doors
1. Design Temp. Difference = Design Temp.- Room Temp.
112.00 - 78.00 = 34.00 Degrees
2. Total Infiltration (from "A") = 92.45 CFM
3. Sensible Gain = 1.1 X 34.00 Degrees X 92.45 CFM = 3457.67 Btuh
4. Total Areas of Windows = 179.28 SQ. Ft.
5. Htm = 3457.67 Btuh / 179.28 SQ. Ft. = 19.29 Btuh/SgFt
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure C: Latent Infiltration Gain For The Entire House
1. Grains of Moisture Difference (Table 1) = 0.00 Gr.
2. Total Infiltration (procedure "A") = 92.45 CFM
3. Total Latent Load =.068 X 0.0 Gr X 92.45 CFM = 0.00 Btuh
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure D: Equipment Sizing Calculation
Mechanical Ventilation = 400.00 Vent CFM
Design Temp. Diff. No. 1 (Proc. B) 34.00 Degrees
Design Grains No. 1 (Proc. C) 0.00
Desired Temp. Swing (3 Degrees)
Temp. Swing Multiplier (TSM) = 1.10
Sensible Ventilation Load = 1.10 X 400.00 Vent CFM X 34.00 = 14960.00 Btuh
Sensible Load for Structure (From Heat Gain Worksheet) = 23724.75 Btuh
Total Sensible Load (Sum of the Above) 38684.75 Btuh
Total Sensible Load X 1.10 TSM = Equipment Sizing Load = 42553.23 Btuh
Latent Load for Appliances and People =230 X 6 People = 1380.00 Btuh
Latent Ventilation Load = .68 X Vent CFM 400.00 X 0.0 Gr = 0.00 Btuh
Latent Infiltration Load (Proc. C) = 0.00 Btuh
Latent Equipment Sizing Load = 1380.00 Btuh
Note: The loads shown are only one of the criteria affecting the selection of HVAC
equipment. Other relevant design factors must also be considered. It is the HVAC
designers responsibility to consider all factors when selecting HVAC equipment.
HEAT LOSS CALCULATIONS
Proposed Residence In: La Quints
Winter Design Temperature 29.00
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I. Transmission Losses
A.
Windows
179.28Sq. Ft. X
.65Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
4777.81
B.
Walls
1268.72Sq. Ft. X
.09Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
4681.58
C.
Floor (Slab)
181.00Ln. Ft. X
.81Btu/ Ft /Hr/Degree
41.00Degrees
X
1.0
Hr
6011.01
Floor (Raised)
0.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
0.00
D.
Ceiling
1730.00Sq. Ft. X
.03Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
2127.90
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
E.
Total Transmission
Losses
17598.30
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
II. Infiltration Losses
14920.00 Cubic Ft @ One Air Change/Hr
14920.00 Cubic Ft .02Btu/CuFt/Hr/Degree 41.00Degrees X 1.0 Hr 11010.96
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
III. Total Losses (Transmission Losses,+ Infiltration -Losses) 28609.26
Btu's per Hour
@ Winter Design
Temperature
HEAT GAIN CALCULATIONS
Proposed Residence In: La 9uinta
Summer Design Temperature 112.00
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I. Transmission Gain a
A.
Windows
179.28Sq. Ft. X
.65Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
3962.09
B.
Walls
1268.72Sq. Ft. X
.09Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
3882.28
C.
Floor (Slab)
181.00Ln. Ft. X
.81Btu/ Ft /Hr/Degree
34.00Degrees
X
1.0
Hr.
4984.74
Floor (Raised)
0.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
0.00
D.
Ceiling
1730.00Sq. Ft. X
.03Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
1764.60
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
E.
Total Transmission
Gains
14593.71
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
II. Infiltration Gains
14920.00 Cubic Ft @ One Air Change/Hr
14920.00 Cubic Ft .02Btu/CuFt/Hr/Degree 34.00Degrees X 1.0 Hr. 9131.04
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
III. Total Gains (Transmission Gains + Infiltration Losses) 23724.75
Btu's per Hour
@ Summer Design
Temperature
MANDATORY MEASURES CHECKLIST: RESIDENTIAL MF -1R
-----------I--------------------------------------------------------------------------------------------------------------------
Note: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach
used. Items marked with an asterisk ($) may be superseded by more stringent compliance requirements listed on the
Certificate of Compliance. When this checklist is incorporated into the permit documents, the features noted shall be
considered by all parties as binding minimum component performance specifications for the mandatory measures whether they
are shown elsewhere in the documents or on this checklist only.
--------------------------------------------------------------------------------------------------------------------------------
DESCRIPTION DESIGNER ENFORCEMENT
--------------------------------------------------------------------------------------------------------------------------------
Building Envelope Measures
$2-5352(a): Minimum ceiling insulation R-19 weighted average.
YES
2-5352(b): Loose fill insulation manufacturer's labeled R -Value.
YES
$2-5352(c): Minimum wall insulation in framed walls R-11 weighted average (does not apply to
YES
exterior mass walls).
YES
2-5352(k): Slab edge insulation -water absorption rate no greater then 0.3%, water vapor
YES
transmission rate no greater than 2.0 perm/inch.
YES
2-5311: Insulation specified or installed meets California Energy Commission (CEC) quality
standards. Indicate type and form. Fiberglass--batts
YES
2-5352(f): Vapor barriers mandatory in Climate tones 14 and 16 only.
2-5317: Infiltration/Exfiltration Controls
a. Doors and windows between conditioned and unconditioned spaces designed to limit air
leakage.
YES
b. Doors and windows certified.
YES
c. Doors and windows weatherstripped; all joints and penetrations caulked and sealed.
YES
2-5352(e): Special infiltration barrier installed to comply with 2-5351 meets CEC quality
standards.
2-5352(d): Installation of Fireplaces
1. Masonry and factory -built fireplaces have:
a. Tight fitting, closeable metal or glass door
YES
b. Outside air intake with damper and control
YES
c. Flue damper and control
YES
2. No continuous burning gas pilots allowed.
YES
HVAC and Plumbing System Measures
2-5352(g) and 2-5303: Space conditioning equipment sizing: attach calculations.
YES
2-5352(h) and 2-5315: Setback thermostat on all applicable heating systems.
YES
$2-5316(a): Ducts constructed, installed and insulated per Chapter 10, 1976 UMC.
YES
2-5316(b): Exhaust systems have damper controls.
YES
2-5314(c): Gas-fired space heating equipment has intermittent ignition devices.
YES
2-5314: HVAC equipment, water heaters, showerheads and faucets certified by the CEC.
YES
2-5352(i): Water heater insulation blanket (R-12 or greater) or combined interior/exterior
insulation (R-16 or greater); first 5 feet of pipes closest to tank insulated (R-3 or greater).
YES
2-5312(Exception I): Pipe insulation on steam and steam condensate return & recirculating
piping.
2-5318(d): Swimming Pool Heating
1. System has:
a. On/off switch on heater.
b. Weatherproof instruction plate on heater.
c. Plumbed to allow for solar.
2. 75 percent thermal efficiency.
3. Pool cover.
4. Time clock.
5. Directional water inlet.
Lighting and Appliance Measures
2-5352(j): Lighting -25 lumens/watt or greater for general lighting in kitchens and bathrooms. YES
2-5314(c): Gas fired appliances equipped with intermittent ignition devices. YES
2-5314(a): Refrigerators, refrigerator -freezers, freezers and fluorescent lamp ballasts certified
by the CEC. Indicate make and model number. YES
INSULATION CERTIFICATE
Address: Stein, La Quinta, CA
ROOF
DESCRIPTION OF INSTALLATION
Material:
Thickness(inches):
EXTERIOR WALL
Material:
Thickness(inches):
CEILING
Brand Name:
Thermal Resistance(R-Value):
Brand Name:
Thermal Resistance(R-Value):
Batt or Blanket Type: Brand Name:
Thickness(inches): Thermal Resistance(R-Value):
Loose Fill Type: Brand Name:
Contr' min inst wt/wt2 lb. Minimum thickness inches.
Manufacturer's installed weight per square foot to achieve
Thermal Resistance (R -Value):
RAISED FLOOR
Material:
Thickness(inches):
SLAB FLOOR
Material:
Thickness(inches):
Width(inches):
FOUNDATION WALL
Material:
Thickness(inches):
Brand Name:
Thermal Resistance(R-Velue):
Brand 'Name :
Thermal Resistance(R-Value):
Brand Name:
Thermal Resistance(R-Value):
DECLARATION
I hereby certify that the above insulation was installed in the
building at the above location in conformance with the current Building
Energy Efficiency Standards for new residential buildings contained in
Title 24 of the California Administrative Code.
General Contractor (Builder):
License Number:
(signature and title) (date)
Sub -Contractor (Insulation Installer):
License Number:
(signature and title) (date)
THERMAL MASS WORKSHEET WS -1R
Project Title: Stein Date: 11-30-89
-----------------------------------------------------------------------
Interior Thermal Mass:
Use one of the two following options for calculating interior mass
as explained in Section 4.2 of the Energy Conservation Manual (ECM).
Method B must be used for mass elements that have an interior unit mass
capacity less than 1.7.
Method A: Look up the Interior Mass/CFA value from ECM Table 4-7 Type
I mass has a Unit Interior Mass Capacity (UIMC) greater than or equal
to 4.2. Type 2 mass has an UIMC greater than or equal to 1.7 and less
than 4.2. Mass % is the mass surface area divided by conditioned floor
area (CFA). For mass elements exposed on both (two) sides to condi-
tioned space, enter the area of only one side to calculate the
percentage.
Mass
Type 1 Mass Area: 440.0 = 25
Type 2 Mass Area: 1290.0 = 75
Interior Mass/CFA from Table 4-7: 2.3
Method B: Calculate the Interior Mass/CFA value using the worksheet
space below. Look up the Unit Interior Mass Capacity (UIMC) for each
interior mass surface in ECM Tables 4-8a, 4-8b and 4-9 reprinted on the
attachment. Include the interior surfaces of exterior mass walls. For
interior mass walls exposed on both (two) sides to conditioned space,
enter the surface area of only one side. Include surfaces of exterior
mass walls as explained in Section 4.2 of the ECM.
Unit Interior Interior
Description Mass Area x Mass Capacity = Mass Capacity
----------- --------- ------------- -------------
(Intentionally left blank)
Total / CFA Interior
Mass/CFA
EXTERIOR WALL THERMAL MASS
Calculate the Exterior Wall Mass of all exterior walls. Look up the
Exterior Mass Factor for each opaque wall element from ECM Table 4-9
reprinted on the Attachment. Only exterior mass wall surfaces may be
included in this calculation.
Opaque Exterior
Description Wall Area x Mass Factor =
----------- --------- -----------
(Intentionally left blank)
Total / Total Opaque Ext Wall
Wall Area Mass
Point System Summary: Climate Zone
15
P -2R
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Project Title:
WOOPW wM1,.1
Date:
11/20/89
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Building Data
Glass Area
% Glass
Conditioned Floor Area:
3118.00
North
38.66
1.24
Number of Stories:
One
East
372.66
11.95
Slab/Raised Floor:
Slab
South
79.00
2.53
Single Family Detached (X)
West
114.66
3.68
Single Family Attached ( )
Skylight
0.00
0.00
Multi -Family ( )
Totals:
604.98
19.40
Addition Alone ( )
Existing Building ( )
Existing Plus Addition ( )
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Score Card
Point
Scores
1. Ceiling Insulation
R:
38.00
U:
0.00
2. Wall Insulation
R:
19.00
U:
0.00
3. Raised Floor Insulation
R:
0.00
U:
0.00
4. Slab Edge Insulation
R:
0.00
U:
0.00
5. Infiltration: Standard
6. Glass Heat Loss Type: Double
U: 0.65
x Glass
19.40
-3.00
-3.00
Sum 1-6
7. Shading (Shade Open)
% Glass
X SC= Eff. x
Glass
a. North
1.24
.77
.95
0.00
b. East
11.95
.77
9.20
-3.00
c. South
2.53
.77
1.95
0.00
d. West
3.68
.77
2.83
1.00
e. Skylight
0.00
.77
0.00
0.00
i
S. Shading (Shade Closed)
SC=
.29Lt Venetian
a. North
1.24
.29
.36
1.00
b. East
11.95
.29
3.47
-5.00
c. South
2.53
.29
.73
2.00
d. West
3.68
.29
1.07
2.00
e. Skylight
0.00
.29
0.00
0.00
9. Interior Thermal Mass
2.50
0.00
10.Exterior Wall Masa
0.00
0.00
-2.00
Heating System (SE X Duct Ef=Eff SE)
SE X
Duct Eff = Eff
SE
Sum 7-10
.72
.78
.56
0.00
Zonal Control Yes
0.00
Cooling System Seer=
1.0.00
0.00
Zonal Control Yes
9.00
Water Heating Type: Storage Gas
Credit:
None
0.00
Point Total
4.00
Certificate of Compliance: Residential (Page 1 of 2) CF-iR
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Project Title: WAWPVM 40,-q1p,kty Project Address: Date: 11/20/89
Documentation Author: Residential Energy Consultants Telephone: (714) 659 5826
Compliance Method: Point System
Climate Zone: 15
Building Permit # Checked by: Date:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
General Information
Total Conditioned Floor Area (SO.Ft.) 3118.00
Building Type: C0 Single Family ( ) Hotel/Motel
( ) Multi -Family ( ) Addition
( ) Existing Plus Addition
Front Entry Orientation: West
Number of Dwelling Units:One
Floor Construction Type: Slab
Infiltration: Standard
Building Shell Insulation
Component Insulation Location/ Comments
Type R -Value (attic, typical, etc.)
Wall 19 typical fiberglass batts in studs
Roof 38 attic
Floor 0
Slab Edge 0
Glazing
Glazing
Area
Glass Type
Shading Devices Overhang
Framing Type
Orientation
(Sq.Ft.)
(double)
Interior Exterior (yes/no)
(metal/wood)
Front (14)
114.66
Double
Lt Venetian None no
Metal
Left (N)
38.66
Double
Lt Venetian None no
Metal
Rear (E)
372.66
Double
Lt Venetian None no
Metal
Right (S)
79.00
Double
Lt Venetian None no
Metal
Skylight
0.00
Double
Metal
Thermal Mass
Type/Covering
Area
Thickness
Location/Description
(slab/tile)
(Sq.Ft.)
Inches
(kitchen,bath,etc.)
Type I:Tile
935.50
3.50
Kitchen/Baths/Entry/Utility/Halls
Type II:Carpet
2182.60
3.50 Rest of the House
Certificate of Compliance: Residential (Page 2 of 2) CF -1R
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Project Title: Date: 11/20/89
^W%41-4.
HVAC Systems
Type
Minimum
Duct
Duct
Output Manufacturer/Model Number
(furnace,etc.)
Efficiency
Location
R -Value
(Btuh) ( or approved equal)
Furnace
.72
attic
2.1
.75000.00 Lennox 7604-75
Air Conditioner
10.00
attic
2.1
Lennox HS- 16461
Maximum Heating
Output:(Btuh)
75000.00
Hot Water Systems
System Type Tank Capacity Manufacturer/Model Special Features
Storage Gas 40 Gallons American GFX 454T R-12 Minimum
Special Features/Remarks:
Two HVAC Systems with Zonal Control
Note: 30%c of Conditioned Floor Area is Tile.
Compliance Statement
This certificate of compliance lists the building features and performance specifications
needed to comply with Title 24, Chapter Two, Subchapter 4, Article 1 of the California
Administrative code. This certificate has been signed by the individual with overall design
responsibility and the building owner, who shall retain a copy of it and transmit the certi-
ficate to any subsequent purchaser of the building. When this certificate of compliance
is submitted for a single building plan to be built in multiple orientations, all building
conservation measures which vary are indicated in the Special Features/Remarks section.
Designer
Name:
Title/Firm:
Address:
Telephone:
License #:
Signature:
Date:
Documentation Author
Name: Eric A. Olson .
Title/Firm: Residential Energy Consultants
Address: Indian Hills Box 34F
Mountain Center.Calif. 92361
Telephone: (714) 659 5826
License #: 473969
Signature:
Date:
Building Owner
Name:.
Title/Firm:
Address:
Telephone
Signature:
Date:
Enforcement Agency
Name:
Agency:
Telephone
Signature:
Date:
INIU11tialOIs iliCaSUI S (AICLo:ttst: o:C.. 'L.ataul NIF-IIZ
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance
approach used. Items marked with an asterisk (*) may be superseded by more stringent compliance requirements listed
on the Certificate of Compliance. When this checklist is incorporated into the permit documents, the features noted shall
be considered by all parties as binding minimum component performance specifications for the mandatory measures
whether they are shown elsewhere in the documents or on this checklist only.
DESCREMON
DESIGNER I-ENFORCEhtENT
Building Envelope Measures
* §2-5352(a): Minimum ceiling insulation R-19 weighted average.. v e s
§2-5352(b): Loose fill insulation manufacturer's labeled R -Value. vo G
* §2-5352(c): Minimum wall insulation in framed walls R-11 weighted average (does not apply to
exterior mass walls). Yes
§2=5352(k): Slab edge insulation - water absorption rate no greater than 0.3%, water vapor
transmission rate no greater than 2.0 perm/inch. v e s
§2-5311: Insulation specified or installed meets California Energy Commission (CEC) quality
standards. Indicate type and form. F i be r x12. s s-- b t t s Y e s
§2-5352(f): Vapor barriers mandatory in Climate Zones 14 and 16 only.
§2-5317: Infiltration/Exfiltration Controls
a. Doors and windows between conditioned and unconditioned spaces designed to limit air
leakage.
b: Doors and windows certified
C. Doors and windows weatherstripped; all joints and penetrations caulked and sealed. Yes
§2-5352(e): Special infiltration barrier installed to comply with §2-5351 meets CEC quality
standards. Yes
§2-5352(d): Installation of Fireplaces .
1. Masonry and factory -built fireplaces have:
a. Tight fitting, closeable metal or glass door
b. Outside air intake with damper and control
c. Flue damper and control
2. No continuous burning gas pilots allowed.
HVAC and Plumbing System Measures
§2-5352(8) and 2-5303: Space conditioning equipment sizing: attach calculations.
t +c hd .
Ye s
§2-5352(h) and 2-5315: Setback thermostat on all applicable heating systems.
Yes
* §2-5316(x): Ducts constructed, installed and insulated per Chapter.10, 1976 UMC.
Ye s
§2-5316(b): Exhaust systems have damper controls. .
ve s
§2-5314(c): Gas-fired space heating equipment has intermittent ignition devices.
Yes
§2-5314: HVAC equipment, water heaters, showerheads and faucets certified by the CEC.
§2-5352(1): Water heater insulation blanket (R-12 or greater) or combined interior/exterior
insulation (R-16 or greater); fust 5 feet of pipes closest to tank insulated (R-3 or greater).
Yes
§2-5312(Exception I): Pipe insulation on steam and steam condensate return & recirculating
piping.
§2-5318(d): Swimming Pool Heating
1. System has:
a. On/off switch on heater.
b. Weatherproof instruction plate on heater.
c. Plumbed to allow for solar.
2. 75 percent thermal efficiency.
3. Pool cover.
4. Time clock.
5. Directional water inlet.
Ligbting and Appliance Measures
§2-53520: Lighting - 25 lumens/watt or greater for general lighting in kitchens and bathrooms. Yes
§2-5314(c): Gas fired appliances equipped with intermittent ignition devices. Yes
§2-5314(a): Refrigerators, refrigerator -freezers, freezers and fluorescent lamp ballasts certified
by the CEC. Indicate make and model number. Yes
Form Revised December 1987
INSULATION CERTIFICATE
Address:
Pia f�1 1�- g�jl NT.a.,
DESCRIPTION OF INSTALLATION
ROOF
Material: Brand Name:
Thickness(inches): Thermal Resistance(R-Value):
EXTERIOR WALL
Material: Brand Name:
Thickness(inches): Thermal Resistance(R-Value):
CEILING
Batt or Blanket.Type: Brand Name:
Thickness(inches): Thermal Resistance(R-Value):
Loose Fill Type: Brand Name:
Contr' min inst wt/wt2 lb. Minimum thickness inches.
Manufacturer's.installed weight per square foot to achieve
Thermal Resistance (R -Value):
RAISED FLOOR
Material:
Thickness(inches):
SLAB FLOOR
Material:
Thickness(inches):
Width(inches):
FOUNDATION WALL
Material:
Thickness(inches):
Brand Name:
Thermal Resistance(R-Velue):
Brand Name:
Thermal Resistance(R-Value):
Brand Name:
Thermal Resistance(R-Value):
DECLARATION
I hereby certify that the above insulation .was installed in the
building at the above location in conformance with the current Building
Energy Efficiency Standards for new residential buildings contained in
Title 24 of the California Administrative Code.
General Contractor (Builder):
License Number:
(signature and title) (date)
Sub -Contractor (Insulation Installer):
License Number:
(signature and title) (date)
Calculation Procedures A, B, C, D for Manual J
Procedure A: Summer Infiltration for Entire House
1. Air Changes/Hour per Table 5
2. Volume of Conditioned Space
Floor Area X Ceiling Height ,_
3118.00 X 9.00 =
.40 AC/HR.
28062.00 Cu. Ft.
3. Total Infiltration .40 X 28062.00 X .02 = 187.45 CFM
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure B: Summer Infiltration Htm For Windows and Doors
1. Design Temp. Difference = Design Temp.- Room Temp.
112.00 - 78.00 = 34.00 Degrees
2. Total Infiltration (from "A") = 187.45 CFM
3. Sensible Gain = 1.1 X 34.00 Degrees X 187.45 CFM = 7010.79 Btuh
4. Total Areas of Windows = 604.98 SA. Ft.
5. Htm = 7010.79 Btuh / 604.98 SO. Ft. = 11.59 Btuh/SgFt
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure C: Latent Infiltration Gain For The Entire House
1. Grains of Moisture Difference (Table 1) = 0.00 Gr.
2. Total Infiltration (procedure "A") i = 187.45 CFM
3. Total Latent Load =.068 X 0.0 Gr X 187.45 CFM = 0.00 Btuh
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Procedure D: Equipment Sizing Calculation
Mechanical Ventilation = 1000.00 Vent CFM
Design Temp. Diff. No. 1 (Proc. B) 34.00 Degrees
Design Grains No. 1 (Proc. C) 0.00
Desired Temp. Swing (3 Degrees)
Temp. Swing Multiplier (TSM) = 1.10
Sensible Ventilation Load = 1.10 X 1000.00 Vent CFM X 34.00 = 37400.00 Btuh
Sensible Load for Structure (From Heat Gain Worksheet) = 44605.38 Btuh
Total Sensible Load (Sum of the Above) 82005.38 Btuh
Total Sensible Load -X 1.10 TSM = Equipment Sizing Load = 90205.92 Btuh
Latent Load for Appliances and People =230 X 6 People = 1380.00 Btuh
Latent Ventilation Load = .68 X Vent CFM 1000.00 X 0.0 Gr = 0.00 Btuh
Latent Infiltration Load (Proc. C) = 0.00 Btuh
Latent Equipment Sizing Load = 1380.00 Btuh
Note: The loads shown are only one of the criteria affecting the selection of HVAC
equipment. Other relevant design factors must also be considered. It is the HVAC
designers responsibility to consider all factors when selecting HVAC equipment.
HEAT GAIN CALCULATIONS
Proposed Residence In: 40M—M��
&,^. 6M%Y I
Summer Design Temperature 112.00
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I. Transmission Gain s
A.
Windows
604.98Sq. Ft. X
.65Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
13370.06
B.
Walls
18.97.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
3224.90
C.
Floor (Slab)
-
278.00Ln. Ft. X
.81Btu/ Ft /Hr/Degree
34.00Degree8
X
1.0
Hr.
7656.12
Floor (Raised)
0.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
0.00
D.
Ceiling
3118.00Sq. Ft. X
.03Btu/SgFt/Hr/Degree
34.00Degrees
X
1.0
Hr.
3180.36
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX.XXXXXXXXXXXXXXXXXXXX
E.
Total Transmission
Gains
27431.44
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
II. Infiltration Gains
28062.00 Cubic Ft W One Air Change/Hr
28062.00 Cubic Ft .02Btu/CuFt/Hr/Degree 34.00egrees X 1.0 Hr. 17173.94
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
III. Total Gains (Transmission Gains * Infiltration Losses) 44605.38
Btu's per Hour
Q Summer Design
Temperature
HEAT LOSS CALCULATIONS
Proposed Residence In: `2
L-A- Z=La 1 r1T,,
Winter Design Temperature 29.00
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
I. Transmission Losses
A.
Windows
604.98Sq. Ft. X
.65Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
16122.72
B.
Walls
1897.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
3888.85
C.
Floor (Slab)
278.00Ln. Ft. X
.81Btu/ Ft /Hr/Degree
41.00Degrees
X
1.0
Hr
9232.38
Floor (Raised)
0.00Sq. Ft. X
.05Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
0.00
D.
Ceiling
3118.00Sq. Ft. X
.03Btu/SgFt/Hr/Degree
41.00Degrees
X
1.0
Hr
3835.14
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
E.
Total Transmission
Losses
33079.09
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
II. Infiltration Losses
28062.00 Cubic Ft ® One Air Change/Hr
28062.00 Cubic Ft .02Btu/CuFt/Hr/Degree 41.00Degrees X 1.0 Hr 20709.76
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXxXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
III. Total Losses (Transmission Losses + Infiltration Losses) 53788.84
Btu's per Hour
® Winter Design
Temperature
" THERMAL MASS WORKSHEET
WS -1R
Project Title: imanow AXT*JNI. Date: 11-20-89
-----------------------------------------------------------------------
Interior Thermal Mass:
Use one of the two following options for calculating interior mass
as explained in Section 4.2 of the Energy Conservation Manual (ECM).
Method B must be used for mass elements that have an interior unit mass
capacity less than 1.7.
Method A: Look up the Interior Mass/CFA value from ECM Table 4-7 Type
I mass has a Unit Interior Mass Capacity (UIMC) greater than or equal
to 4.2. Type 2 mass has an UIMC greater than or equal to 1.7 and less
than 4.2. Mass % is the mass surface area divided by conditioned floor
area (CFA): For mass elements exposed on both (two) sides to condi-
tioned space, enter the area of only one side to calculate the
percentage.
Mass %
Type 1 Mass Area: 935.5 = 30
Type 2 Mass Area: 2182.6 = 70
Interior Mass/CFA from Table 4-7: 2.5
Method B: Calculate the Interior Mass/CFA value using the worksheet
space below. Look up the Unit Interior Mass Capacity (UIMC) for each,
interior mass surface in ECM Tables 4-8a, 4-8b and 4-9 reprinted on the
attachment. Include the interior surfaces of exterior mass walls. For
interior mass walls exposed on both (two) sides to conditioned space,
enter the surface area of only one side. Include surfaces of exterior
mass walls as explained in Section 4.2 of the ECM.
Unit Interior Interior
Description Mass Area x Mass Capacity = Mass Capacity
----------- --------- ------------- -------------
(Intentionally left blank)
Total / CFA Interior
Mass/CFA
EXTERIOR WALL THERMAL MASS
Calculate the Exterior Wall Mass of all exterior walls. Look up the
Exterior Mass Factor for each opaque wall element from ECM Table 4-9
reprinted on the Attachment. Only exterior mass wall surfaces may be
included in this calculation.
Opaque Exterior
Description Wall Area x Mass Factor =
----------- --------- -----------
(Intentionally left blank)
Total / Total Opaque
Wall Area
Ext Wall
Mass
D
9
San Diego
Modesto
Corona
4— Yucca Valley
American Engineering Laboratories, Inc. Palm Desert
42240 Green.Way, Suite C, Palm Desert, CA 92260 (619) 341-5791
June 21, 19:90
Account No. 81040
Jerry Lugo
'79860 Boqueron Way
Bermuda Dunes, CA 9220.1
Subject: In Place Density Testing
S' ple Family Residence
51-535 E•isEnhowP'r�D`ri
a Quin a, alifornia
On June 20, 1990 a representative of this company visited the
above referenced project and performed in place density
tests.
The results of our testing indicate that the embankment
placed as compacted fill was compacted to at least 90 percent
of maximum density at the locations tested.
The maximum density..:was.determined per ASTM Test Method D1557
and the field density tests were performed in accordance with
ASTM D2922.
Please call this office if you have any questions regarding
the above referenced project.
Sincerely,
AM, ICAN NN'INEERING LABORATORIES, INC.
Paul Hoerst t
Vice sident De.ert Division
cc: Lugo (-2 )
PRH/kc
7940 Arjons Dr., Suite A, San Diego, CA 92126 (619) 695-3730
515 Galaxy Way, Modesto, CA 95356 (209) 576-0813
1490 Rincon St., Unit Z, Corona, CA 91720 (714) 272-4230
58945 Business Center Dr. Unit A, Yucca Valley, CA 92284, (619) 228-1754
AMERICAN ENGINEERING LABORATORIES, INC.
a' P4D
0 7940 Arjons Dr., Suite A 0 350 S. Maple St., Unit K 0• 515 Galaxy Way 0 58945 Business Center Dr., Unit A
San Diego, CA 92126 Corona, CA 91720 Modesto, CA 95356 Yucca Valley, CA 92284
(619)695-3730 (714)272-4230 (209)576-0813 (619)228-1754
CLIENT: PROJECT: DATE: (:.-/ZG��o
reIr k' y S 1 —,:;3- _ I.D. NO.:
L uGv PROJECT NO.: Q 04 Q
SFS t�
REPORT OF FIELD COMPACTION TEST
TEST is
LOCATION OF TEST - 5/
C•C rit,� !'
C-� o'n
/C
/GZV'/"
fJ
FIELD
OPTIMUM
FIELD
MAXIMUM
PERCENT
PERCENT
REMARKS: l
MOISTURE
MOISTURE
DRY DENSITY
DRY DENSITY
RELATIVE
REL COMP.
� I t./
%
%
P.C.F.
P.C.F.
COMPACTION
REQUIRED
REOUIREO
L
145
10.7.
l O �i. 3
l S
9 S
90
TEST a
LOCATION OF TEST
J /'�
C•C rit,� !'
C-� o'n
/C
/GZV'/"
1�j/�,�
r Z cY
��-7
FIELD
OPTIMUM
FIELD
MAXIMUM
PERCENT
PERCENT
REMARKS: J / /
MOISTURE
MOISTURE
DRY DENSITY
DRY DENSITY
RELATIVE
REL COMP.
/r �'y/ ue
e
P.C.F.
COMPACTION
REOUIREO
L
l O �i. 3
l S
9 S
90
TEST p
LOCATION OF TEST
5 ee_ :�-� ,•�, ( �,
C-� o'n
�� Vii-r<Ivv/ •= f (.� �(
��-7
FIELD
OPTIMUM
FIELD
MAXIMUM
PERCENT
PERCENT
REMARKS:/( J
MOISTURE
MOISTURE
DRY DENSITY
DRY DENSITY
RELATIVE
REL. COMP.
/f.Tt( Ve
���---FFF==="'
%
P.C.F.
COMPACTION
REQUIRED
��'
l O �i. 3
l S
9 S
90
TEST 4
LOCATION OF TEST �- 85
5 ee_ :�-� ,•�, ( �,
C-� o'n
FIELD
FIELD
MOISTURE
OPTIMUM
MOISTURE
FIELD
DRY DENSITY
P.CC..F.
MAXIMUM
DRY DENSITY
PERCENT
RELATIVE
COMPACTION
PERCENT
REL COMP.
RE�O(�U'IIRED
REMARKS: /
Po
//-%
11 S
DRY DENSITY
1
REL. COMP.
TEST p
LOCATION OF TEST S/ :56 j
e.
r, 4/ dH ,
FIELD
OPTIMUM
FIELDMAXIMUM
PERCENT
PERCENT
REMARKS:
MOISTURE
MOISTURE
DRY DENSITY
DRY DENSITY
RELATIVE
REL. COMP.
P.C.F.
COMPACTION
REOUIREO
`P.a s�
l O �i. 3
l S
9 S
90
�LRR,y L -o
5 5 85 .0\SCm\mwGR DR.
• \ SC ZJ \-\Q,
dCZJuiCS Of -NS \�`I rt'�S� �.OGP•�1��]
American Engineerinsg Iavoratories, Inc
58945 Business Cencer Dr- Unic A
Yucca Vallev. CA 9Z234
ir.l91 '_29-1771L