The URL can be used to link to this page

07-2793 (RC)r-' P.O. 'BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number_ 07-00002793 `Property Address: 78115 CALLE ESTADO STE 103 APN: 770-152-010- - - Application description: REMODEL - COMMERCIAL Property Zoning: VILLAGE COMMERCIAL Application valuation: 15000 T4,ht " - A___/ BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Applicant: Architect or Engineer: ----------------- LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and P ssionals Code, and my License is in full force and effect. enseJC/ascs: 814110 icense No.: B Y Date: / /7 ��ontractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars 1$500).: (_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec: 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). _) 1, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). 1 1 I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.1. Lender's Name: _ Lender's Address: LQPE%NIIT VOICE (760),777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 11/06/07 Owner: DEMAN RICHARD L 74140 EL PASEO NO 377 PALM DESERT, CA 92260 Contractor: /i V SANTA ROSA BUILDERS, IN�, 78115 CALLE ESTADO, # LA QUINTA, CA 92253 %sot,( cS� (760) 972-6494 �C"9 00% L i c . No.: B �p�O��y�o --------------------------------NV ------------ WORKER'S COMPENSATION DECLARATION % -/ hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier EXEMPT Policy Number EXEMPT I certify that, in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, . and agree that, if I should beco a subject to the workers' compensation provisions of Section 700 of the Labor Cod , I all or t comply with those provisions. �ate: � /SfV Applicant: WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL . SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of,(�is cou tyytto{eenter upon the above-mentioned prop erttfor�ction purposes. Date : ��+ V ignature (Applicant or Agent): •1�i e _ Application Number . . . . . 07-100002793 ------ Structure Information EXISTING SHELL SUITE 103 ----- Other struct info . . . . . CODE EDITION 0!BMP04E05EN FIRE SPRINKLERS YES MIXED-USE OCCUPANCY B OCCUPANT LOAD 5.00 1ST FLOOR SQUARE FOOTAGE 421.00 2ND FLOOR SQUARE FOOTAGE .00 ---------------------------------------------------------------------------- Permit . . . BUILDING PERMIT Additional desc . . SUITE 103 OFFICE T.I. Permit Fee . . . . 162.00 Plan Check Fee . Issue Date . . . . Valuation . . . Expiration Date . . 5/04/08 105.30 15000 Qty Unit Charge Per Extension BASE FEE 45.00 13.00 9.0000 THOU BLDG 2,001-25,000 117.00 ---------------------------------------------------------------------------- Permit . . . ELECT-- ADD/ALT/REM Additional desc . Permit Fee 18.75 Plan Check Fee 4.69 Issue Date . . . . Valuation . . . . 0 Expiration Date . . .5/04/08 Qty Unit Charge Per Extension' BASE FEE 15.00 5.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20 3.75 ---------------------------------------------------------------------------- Permit MECHANICAL Additional desc . Permit Fee . . . . 19.50 Plan Check Fee Issue Date . . . . Valuation . . Expiration Date . . 5/04/08 4.88 0 Qty Unit Charge Per Extension BASE FEE 15.00 1.00 4.5000 EA MECH VENT INST/ DUCT ALT 4.50 ---------------------------------------------------------------------------- Special Notes and Comments 421 SF OFFICE T.I. SUITE 103 "CROSS REALTY" "B" OCCUPANCY, TYPE V -N CONSTR. .00CUPANT LOAD = 5. 2001 CBC,CMC,CPC, 2004 CEC, 2005 ENERGY CODES -----_----------------------------------------------------------------------- Other Fees . . . . . . . . . ACCESSIBILITY PLAN REVIEW 10.53 LQPERMIT 0 s. s Application Number . . . . . 07-00002793 -_--------------------------------------------------------------------------- Other Fees . . . . . . . . . ENERGY REVIEW FEE 10.53 Fee summary Charged Paid ---------- Credited Due ----------------- Permit Fee Total ---------- 200.25 ---------- .00 ---------- .00 200.25 Plan Check Total 114.87 .00 .00 114.87 Other Fee Total 21.06 .00 .00 21.06 Grand Total 336.18 .00 .00 336.18 LQPE&IIT 407/o-) B'" # City of La Quinta Building U Safety Division P.O. Box 1504,78-495 Calle Tampico. La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # Project Address:�' 'L( -E FST " Owner's Name: A. P. Number: 152 0/ 6*0021,Address: ,SZ —.02-0 ,f/V,pVfr11 Legal Description: City, ST, Zip:, COAC:/ti��G��Q CA 9 Z 236 Contractor: Telephone: Address: Project Description: City, ST, zip: rEjl/id/Vr o ��MfrN7� _ To Telephone: State Lic. # : City Lic. #: Arch., Engr, ,Designer: S A/ty�' �/JoLfh�*Zfi _Ur./47 Address: .r 2d cA « 16:SF ,VZ) City, ST, Zip:.... A6 Telephone':'. .'. U State Lic. Name of Contact Person:%t��N ��- Construction Type: N4D,4-AW( ccupancy. "' pFF%GE Project type (circle one): New Add'n Alter Repair Demo Sq. Ft.: 'q-2 # Stories T# Units: Telephone # of Contact Person: L6'0 ,!5;d 74 7 Estimated Value of Project: APPLICANT: DO NOT WRITE BELOW THIS LINE.' # Submittal Req'd Rec'd TRACKING. PERMIT FEES Plan Sets Plan Check submitted 1 Item Amount Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Calcs. Called Contact Person Plan Check Balance Energy Calcs. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2"" Review, ready for corrections ssue Electrical Subcontactor List Called Contact Person Plumbing Grant Deed Plans picked up S.M.I. H.O.A. Approval Plans resubmitted Grading IN HOUSE:- '`" Review, ready for corrections/issue ` Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr' Date of permit issue 0 School Fees Total Permit Fees of Occupancy Safety Department This Certificate is issued pursuant to the requirements of Section 109 of the California Building Code, certifying that, at the time of issuance, this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/or use. BUILDING ADDRESS: 78-115 CALLE ESTADO STE #103 Use classification: COMMERCIAL ("CROSS REALTY11 Building Permit No.: 07 2793 Occupancy Group: B Owner of Building: CALLE ESTADO LLC Building Official Type of Construction: VN Land Use Zone: VC Address: 52-050 INDUSTRIAL WAY City, ST, ZIP: COACHELLA, CA 92236 By: STEVE TRAXEL Date: November 30, 2007 John R. Hawkins Fire Chief Proudly serving the unincorporated areas of Riverside County and the Cities of. Banning Beaumont :• Calimesa. Canyon Lake Coachella 4. Desert Hot Springs Indian Wells :• Indio 4. Lake Elsinore La Quinta Moreno Valley Palm Desert e. - Perris Rancho Mirage :• San Jacinto Temecula Board of Supervisors Bob Buster, District 1 John Tavaglione, District 2 Jeff Stone,. . District 3 Roy Wilson, District 4 Marion Ashley, District 5 RIVERSIDE COUNTY FIRE DEPARTMENT In cooperation with the California Department of Forestry and Fire Protection 77-933 Las Montanas Rd., Suite 201 • Palm Desert, California 92211 • (760) 863-8886 • Fax (760) 863-7072 October 30, 2007 Applicant: Calle Estado LLC #203 88 Lenora St Seattle Wa: (760) 972-6545 RE: TENANT IMPROVEMENT PLAN CHECK LAQ-07-TI-126 / Plaza Estado 78115 Calle Estado LaQuinta, Ca. 92253 You have been issued a release for a tenant improvement on an existing building. THIS IS NOT AN OCCUPANCY PERMIT. It is prohibited to use/process or store any materials in this occupancy that would classify it as an "H" occupancy per Sec. 307 of the 2000 UBC. THE FOLLOWING CONDITIONS MUST BE MET PRIOR TO INSPECTION: Install door hardware and exit signs as per Chapter 10 of the 2001 CBC. Fire sprinkler system plans for the tenant improvement area must be submitted to the Fire Department for review, along with a plan/inspection fee. A licensed C-16 contractor will have to submit plans for review and approval and modify the fire sprinkler system in accordance with NFPA 13, 1999 Edition. A licensed C-16 contractor shall do all sprinkler work and certification. The approved plans, with Fire Department Job card must beat the job site for all inspections. Provide keys to the tenant space for inclusion in the main building Knox Box. Key(s) shall have durable and legible tags affixed for identification of the correlating tenant space. Install Knox Lock Boxes, Models 4400, 3200 or 1300, mounted per recommended standard of the Knox Company. Plans must be submitted to the Fire Department for approval of mounting location/position and operating standards. Special forms are available from this office for the ordering of.the Key Lock Boxes. This form must be authorized and signed by this office for the correctly coded system to be purchased. If the building/facility is protected with a fire alarm system or burglar alarm system, the lock boxes will require "tamper' monitoring. Shelving, counters, etc., must be in place, however, no merchandise may be placed in the building prior to.inspection A minimum 2A10BC Fire Extinguisher, (State Fire Marshal Approved) must be mounted in a visible location within 75' walking distance from any point in your building or suite. Fire extinguishers can be installed by a licensed extinguisher company with a State Fire Marshal service tag attached to the extinguisher, or purchased from a retail store with a sales receipt attached. A licensed fire extinguisher company must service extinguisher yearly. 2300 Market Street, Suite 150 • Riverside, California • (951) 9554777 • Fax (951) 9554886 39493 Los Alamos Road, Suite A • Murrieta,'Califomia 92563 9 (951) 600-6160 • Fax (951) 600-6164 ELECTRICAL PANEL BOX: All breakers must be labeled and a clearance of 36 inches must be maintained around the panel at all times. OTHER REQUIREMENTS: Approved building address shall be placed in such a position as to be plainly visible and legible from the street and rear access if applicable. Building. address numbers shall be a minimum of 12" for building(s) up to 25' in height, and 24" in height for building(s) exceeding 25' in height. In multi -tenant buildings, businesses shall post the business name and suite number on back doors as well as the front. Suite numbers or letters must be a minimum of 6" in height. All addressing must be legible and of a contrasting color with the background and adequately'illuminated to be visible from the street at all hours. A durable sign stating "This door to remain unlocked during business hours" shall be placed on or adjacent to the front exit door. The sign shall be in letters not less than one inch high on a contrasting background. Appliicantlinstaller shall be responsible to contact the Fire Department to schedule inspections. A re -inspection fee will be required if more than one (1) inspection is necessary. Requests for inspections are to be made at least 72 hours in advance and may be arranged by calling (760) 863-8886. All questions regarding the meaning of these conditions should be referred to the Fire Department Planning & Engineering Staff at (760) 863-8886. Scerel , Colleen E. Estrada Fire Safety Specialist 2300 Market Street, Suite 150 • Riverside, California • (951) 955-4777 • Fax (951) 955-4886 39493 Los Alamos Road, Suite A • Murrieta, California 92563 • (951) 600-6160 • Fax (951) 600-6164 SOUTH WEST CONCEPTS Architectural Design & Development 78-120 Calle Estado, Suite 206 La Quinta, CA 92253 Tel (760) 564-4707 Fax (760) 564-4955 City of La Quinta 78-495 Calle Tampico La Quinta, CA 92247-1504 October 4, 2007 Summary of Tenant Improvements at Plaza Estado Building The following is a chronological summary of the TI'9 and client list for the Plaza Estado building located at 78-115 Calle Estado, La Quinta, CA 92253 up to October 4, 2007. • 6/20/07 (Approximately) Submitted TI's for Suites 201 & 202 with client "South West Concepts" and for Suite 206 with client."Howard L. Rasch, Attorney at Law" • 7/6/07. Submitted TI's for Suite 106 with client "Salon W Beauty Parlor". • '7/19/07 Submitted TI's for Suite 105 with client "Leather & Shoes & More" and for Suite 104 with client `.`American Mortgage Advisers". • 7/24/07 First Review Plan. check corrections for Suite 206 (Howard L. Rasch, Attorney at Law) received: • 7/26/07 First Review Plan check corrections for Suite 106 (Salon W Beauty Parlor) received. There was an issue that came up with Community Development (additional parking spaces required) that made it impossible for this TI to continue. The Beauty Parlor pulled out. • 8/2/07 FirstReview Plan Check corrections for Suite 104 (American Mortgage Advisers) received. • 8/15/07 Suite 106 became available again because the Beauty Parlor pulled .out. Then the whole situation changed and American Mortgage Advisers decidedto take Suites 106 & 107, and they wanted a doorway between the two suites. Leather & Shoes & More decided to take Suites 104 & 105, and they wanted a pre-engineered and approved opening between the suites. Suites 201, 202, and 206 remained unchanged. • 8/20/07 (Approximately) TI's for suites 201 & 202 (South West Concepts) approved and permit pulled. • 9/20/07 Submitted new TI's for Suites 104 & 105 (Leather & Shoes & More) and 106 & 107 (American Mortgage Advisers) • 10/1/07 TI's for suite 206 (Howard L. Rasch, Attorney at Law) approved and permit pulled. • 10/4/07 Three more sets of plans for Suites 104 & 105 submitted. One more set of plans for Suites 106 & 107 submitted. To: City of La Quints Building Dept. 10/23/07 From: Calle Estado LLC Re: Tenant Improvement Contractor This letter is to notify the building department that Santa Rosa Builders, Inc. (#814110) will be contractor of record on 78-115 Calle Estado ( also known as Plaza Estado)-Suite #'s 101, 102, 103, 104, 105, 106, 107, 203, 204, 205 Asaro Builders remains contractor of record on Suite # 206 Southwest Concepts (#523837) is contractor of record for Suites # 201 & 202. Thank You David Brudvik Partner Calle Estado, LLC (760)972-6494 October 22, 2007 Attn: Building Department C/o City of La Quinta 78-495 Calle Tampico La Quinta, CA 92253 Project: Plaza Estado, 78-115 Calle Estado, Za Quinta, CA 92253. RE: Tenant Improvement Permits . To Whom It May Concern, Asaro Builders, Inc. is hereby giving written notice to The City of La Quinta Building Department that we are NOT currently the "Contractor of Record" for the tenant improvements, for suites #201 & 202. Please remove are name from this permit. Additionally, please note we are NOT currently the "Contractor of Record" for suites #101, 102, 103, 104, 105, 106, .107, 203, 204 & 205. The only suite we ARE currently."The Contractor of Record" for, is suite #206 and we remain the "Contractor of Record" for the building shell. We hope this clears up any confusion that may arise. ,Respectfully, Asaro Builders Inc. Jim Huffman Sr. Project Manager cc: StanAsaro File D� Il OCi 2 2 2M7 42-220 GREEN WAY, SUITE H, PALM DESERT, CA 92211, (760) 776-0043 FAX (760) 837-1049 T @ T 0 -TT ocr 192007 TITLE 24 REPORT Title 24 Report for: Calle Estado, LLC Desert Club Dr. & Calle Estado La Quinta, CA 92253 Sul !0 Project Designer: South West Concects 78-120 Calle Estado, Suite 206 La Quinta, CA 92253 (760) 564-4707 Report Prepared By: Tim Scott Scott Design & Title 24 77085 Michigan Dr. Palm Desert, CA 92211 (760) 200-4780 Job Number: ` Date: CITY OF LA QUINTA BUILDING & SAFETY DEPT. APPROVED FOR CONSTRUCTION -1q 2.2 6/13/2007 ' The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.3 by EnergySoft Job Number: us tuber. 6712 I TABLE OF CONTENTS I Cover Page Table of Contents Nonresidential Performance Title 24 Forms Form ENV -MM Envelope Mandatory Measures Form LTG -7-C Room Cavity Ratio Worksheet Form OLTG- 1-C.Certificate of Compliance. Form OLTG-2-C Lighting Compliance Summary Form OLTG-3-C Illuminated Area Calculation Worksheet Form LTG -MM Lighting Mandatory Measures Form MECH-MM Mechanical Mandatory Measures HVAC System Heating and Cooling Loads Summary Room .Load Summary Room Heating Peak Loads Room Cooling Peak Loads Room Cooling Coil Loads 1 2 3 27 28 29 31 32 33 34 36 49 62 75 89 I EnergyPro 4.3 by EnergySoft Job Number: User Number. 6712 1 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 1 of 3 PERF -1 [PROJECT NAME 1 Calle Estado, LLC ` PROJECT ADDRESS Desert Club Dr. & Calle Estado La Quinta PRINCIPAL DESIGNER - ENVELOPE South West Concects DOCUMENTATION AUTHOR Scott Design & Title 24 TELEPHONE (760) 564-4707 200-4780 DATE 6/13/2007 GENERAL INFORMATION This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation Is accurate and complete. DOCUMENTATION AUTHOR DATE OF PLANSBUILDING DATE Tim Scott CONDITIONED FLOOR AREA 9,048 Sq.Ft. The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents is CLIMATE ZONE 1 15 BUILDING TYPE ® NONRESIDENTIAL HIGH RISE RESIDENTIAL E] HOTEL/MOTEL GUEST ROOM PHASE OF CONSTRUCTION ® NEW CONSTRUCTION D ADDITION ❑ EXISTING + ADDITIONIALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the building features and performance specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to a Building using the performance compliance approach. The documentation preparer hereby certifies that the documentation Is accurate and complete. DOCUMENTATION AUTHOR SIGNATURE DATE Tim Scott The Principal Designer hereby certifys that the proposed building design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building as designed meets the energy efficiency requirements contained in sections 110, 116, through 118, and 140, 142, 143 or 149 of Title 24, Part 6. ENV. LTG. MECH. p❑ ❑ 1. 1 hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to } sign this document as the person responsible for its preparation; and that I am licensed in the State of / California as a civil engineer, mechanical engineer, or I am a licensed architect. U El. El 2. 1 affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. QR R 3. 1 affirm that I am eligible under Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538, and 6737.1. (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) ENVELOPE COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures ENV -1 Required Forms PRINCIPAL ENVELOPE DESIGNER - NAME SIGNATURE LIC. NO. DATE South West Concects LIGHTING COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures LTG -1, LTG -2, LTG -3 Required Forms PRINCIPAL LIGHTING DESIGNER - NAME SIGNATURE LIC. NO. DATE He - e Electrical Contractors MECHANICAL COMPLIANCE Indicate location on plans of Note Block for Mandatory Measures MECH-1 MECH-2 MECH-3 MECH-5 Required Forms .PRINCIPAL MECHANICAL DESIGNER - NAME SIGNATURE LIC. NO. DATE H & H Air Conditioning EnergyPro 4.3 by EnergySoft_ User Number. 6712 Job Number. Pane:3 of 102 1 PERFORMANCE CERTIFICATE OF COMPLIANCE Part2 of PERF -1 DATE 6/1 Building Orientation Number of Stories Number of Systems Number of Zones PROJECT NAME � Calle Estado, LLC Conditioned Floor Area Unconditioned Floor Area Conditioned Footprint Area Fuel Type ANNUAL TDV ENERGY USE SUMMARY kBtuls ft- r sqft sqft. sqft. ENERGY COMPONENT Standard Design 14 Proposed Design 13 Compliance, Margin Space Heating Space Cooling Indoor Fans Heat Rejection Pumps & Misc. Domestic Hot Water Lighting Receptacle Process TOTALS: Percent better than Standard: 1.46 1.29 0.18 204.60 194.26 10.34 53.98 57.67 -3.69 0.00 0:00 0.00 0.00 0.00 0.00 16.17 16.31 -0.14 72.98 75.14 -2.16 81.78 81.781 0.00 4.90 4.90 0.00 435.87 431.34 4.53 1.0% 1.1% excl DATE 6/1 Building Orientation Number of Stories Number of Systems Number of Zones N o deg Conditioned Floor Area Unconditioned Floor Area Conditioned Footprint Area Fuel Type 9,048 sqft sqft. sqft. 2 .0 14 5,402 13 Natural Gas Left Elevation (E) 1,770 Orientation Gross Area Glazing Area Glazing Ratio Front Elevation N 3,065 sqft. 1,260 sqft. 41.1% Left Elevation (E) 1,770 sqft. 233 sqft. 13.2% Rear Elevation S 3,135 sqft. 586 sqft. 18.7% Right Elevation (W) 1,870 sgft. 80 sqft. 4.3% Total 1 9,840 sqft. 2,158 sqft Roof 5,411 sqft. sqft. 0.0% Standard Proposed Lighting Power Density 1:100 W/sgft. 1.133 W/sgft. Prescriptive Env. Heat Loss 2,192 Btu/h 2,075 Btu/h Prescriptive Env. Heat Gain 226,727 Btu/h-F 217,905 Btu/h-F Remarks: y EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page:4 of 102 PERFORMANCE CERTIFICATE OF COMPLIANCE Part 3 of PERF -1 PROJECT NAME DATE Calle Estado, LLC 6/13/2007 LONE INFORMATION Floor Inst. Area LPDGrAili+� mire _ r�13 ddadsy System Name Zone Name Occupancy Type (sgftJ „ (Wlsf)1 3 HVAC -4 Suite 101 Comp Bldg Office 820 0.794,11111.1, HVAC -2 Suite 102 Comp Bldg Office 433 1.28 It _.. "T HVAC-2.5 Suite 103 Comp Bldg Office 484 - VT..,.. 1.28 E:`:k=",44:'-ja HVAC -2 Suite 104 Comp Bldg Office 484 1.28 �" .: r 'rrl �F.==s '��Jt - HVAC -2 Suite 105 Comp Bldg Office 433 1.28 .( kJ�a Srrtl �# ' ;y am ,, 14k v... HVAC 2.5 Suite 106 Comp Bldg Office 578 ;_: 1.28 ' x+ . ' . ' ':q T : kpri HVAC 2 Suite 107 Comp Bldg Office 405 1.37 HVAC -3 Suite 201 Com Bld Office 619 1.05iz;; �ci t7 1 iJ ia.,T HVAC -3 Suite 202 Comp Bldg Office 728 1.02 taF` ��r"at t� HVAC -3 Suite 203 Com BldgOffice 781 1.27 �I f+':` �rF - HVAC -4 Suite 204 Comp Bldg Office 860 1.26 r.: sR". HVAC -4 Suite 205 Comp Bldg Office 1,733 0.93 HVAC -3.5 Suite 206 Comp Bldg Office 690 1.07 'r �.t'i• „ei- `.d'' -1-m �51. ,f,. :yit.�. :f+T c:•�ii 'tti .t..r 'I:iiI "-1: ,I 01 ...S73ig , Notes: 1. See LTG -2-C 2. See LTG -4-C 3. See LTG -5-C 4. See LTG -6-C ltems7afipve feiZyie�SRte{cialiocii`menta'ti`%i (items marked with asterisk, see LTG -2 -C by others) (by others) EXCEPTIONAL CONDITIONS COMPLIANCE CHECKLIST The local enforcement agency should pay special attention to the Items specified in this checklist. These Items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. The HVAC System "Carrier 38YRA02433" includes Demand Control Ventilation per Standards Section 121. The HVAC System "Carrier 38YRA04833" includes Demand Control Ventilation per Standards Section 121. The HVAC System "Carrier 38YRA03033" includes Demand Control Ventilation per Standards Section 121. The HVAC System "Carrier 50JX0365" includes Demand Control Ventilation per Standards Section 121. The HVAC System "Carrier 50JX0485" includes Demand Control Ventilation per Standards Section 121. The HVAC System "Carrier 50JX0423" includes Demand Control Ventilation per Standards Section 121. The exceptional features listed in this performance approach application have specifically been reviewed. Adequate written justification and -icumentation for their use have been provided by the applicant Authorized EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Paae:5 of 102 1 CERTIFICATE OF COMPLIANCE ENV -1-C NAME Calle Estado, LLC DATE 6/13/2007 # Surface Type I Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 1 lWall / 1 171 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 101 2 lWall f 6 0.074 R-19 R-0.0 45 90 New 09-A5 Suite 101 3 Wall � 161 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 101 4 Wall J, 346 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 101 5 Wall 15 0.074 R-19 R-0.01 270 90 New 09-A5 Suite 101 6 Wall 6 . 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 102 7 Wall 70 116 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 102 8 Wall 13 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 103 9 Wall 18 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 103 10 Wall 24 0.074 R-19 R-0.0 270 90 New 09-A5 Suite 103 11 Door 2 1.450 None R-0.0 270 90 New 28-A1 Suite 103 12 Wall 13 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 104 13 Wall 26 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 104 14 Wall 18 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 104 15 lWall 6 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 105 16 Wall / 11 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 105 17Wall 11 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 106 18 Wall 3 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 106 19 Wall 29q 0.074 R-19 R-0.01 270 1 90 1 New 09-A5 Suite 106 20 Wall 9 0.074 R-19 R-0.01 90 1 90 1 New 09-A5 Suite 107 N. E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES 1 1 More than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either Issued by NFRC or provide a CEC Default Label Certificate using the default LI -factors from Standards Table 116-A and B. Certificate shall be filed in the contractors nmiacf offim durinn-tmctinn and in the hi ildinn mannnprs Mao„ aft- M. M.Hi- # Tvpe Area U -Fac' SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments Window Front N 24 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 101 Window Front N 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 101 ' 3 Window Front N 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 101 4 Window Front N 36 0.580 116 -Al 0.53 116-B 0 New Double Non Metal Tinted Suite 101 5 Window Front NE 36 0.580 116-A 0.53 116 -BI 45 New I Double Non Metal Tinted Suite 101 6 Window Left E 36 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 101 7 Window Rear S 20 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 101 8 Window Rear S 24 0.5801116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 101 9 Window Front N 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 102 10 Window Front N 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 102 11 Window Front N /. 24 0.580 116-A 0.53 116-B 01 New Double Non Metal Tinted Suite 102 12 Window Rear S 24 0.580 116 -Al 0.53 116-B 1 1801 New I Double Non Metal Tinted Suite 102 13 Window Rear S 25 0.580 116 -Al 0.53 1116-131 1801 New I Double Non Metal Tinted Suite 102 1 LI -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 1 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 2 None 1 0.76 8.0 6.0 2.0 0.1 2.0 2.0 3 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 4 None 0.76 6.0 6.0' 2.0 0.1 2.0 2.0 5 None / 0.76 6.0 6.0 2.0 0.1 2.0 2.0 6 None 0.76 6.0 6.0 2.0 0.1 2.0 2.0 7 None 0.76 5.0 4.0 10.0 0.1 10.0 10.0 8 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 9 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 10 None 0 0.76 8.0 6.0 2.0 0.1 2.0 2.0 11 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 12 1 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 13 1 None 0.76 5.0 5.0 10.0 0.1 10.0 10.0 IINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES I The proposed building Is In climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a calling height greater than 15 feet, and an LPD for general u lighting of at least 0.5 W1fl2. See Section 143(c). If this box Is checked, ENV -4•C must be filled ouL when submitting under the Prescriptive Compliance Approach. EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Paae:6 of 102 1 CERTIFICATE OF COMPLIANCE ENV -1-C 1,P.ROJECT NAME DATE 1 Calle Estado, LLC 6/13/2007 # Surface T Type Area U -Fac. Insulation Cay. Cont. Act. A. zm Tilt Cond: Status Joint Appendix IV Reference Location / Comments 21 Wall 4 Window 21 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 107 22 lWall 1 19C 0.074 R-19 R-0.0 270 90 New 09-A5 Suite 107 23 Roof 16 Window 61E 0.036 R-30 R-0.0 0 0 New 02-A9 Suite 201 24 Wall 17 Window 139, 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 201 25 Wall 18 Window 64 0.074 R-19 R-0.0 45 90 New 09-A5 Suite 201 26 Wall 19 Window 124 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 201 27 Wall 20 Window 286 0.074 R-19 R-0.01 180 90 New 09-A5 Suite 201 28 Roof 21 Window 72E 0.036 R-30 R-0.0 0 0 New 02-A9 Suite 202 29 lWall 22 Window 64 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 202 30 Wall s- 20 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 202 31 Wall i 15 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 202 32 Floor / 28 0.037 R-19 R-0.0 0 180 New 20-A4 Suite 202 33 Roof 26 Window 78 0.036 R-30 R-0.0 0 0 New 02-A9 Suite 203 34 Wall 13 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 203 35 Wall 17 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 203 36 Wall 36 0.074 R-19 R-0.0 270 90 New 09-A5 Suite 203 37 Door 0 None R-0.0 270 90 New 28-A1 Suite 203 38 Floor i�V860.036 7 R-19 R-0.0 0 180 New 20-A4 Suite 203 39 Roof R-30 R-0.0 0 0 New 02-A9 Suite 204 40 Wall 4 R-19 R-0.0 0 90 New 09-A5 Suite 204 N, E, A, R IMore than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either Issued by NFRC or provide a CEC Default Label Certificate using the default 11 -factors from Standards Table 116-A and B. Certificate shall be filed in the contractors project office during construction and in the building manager's once after construction # Tvpe Area U -Fac' SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments 4 Window Front N r 24 0.580 116-A 0.53 116-B 0 New Double on Metal Tinted Suite 103 Window Front N / 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 103 16 Window Front N / 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 103 17 Window Rear S < 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 103 18 Window Rear S 0.1 25 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 103 19 Window Front N i 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 104 20 Window Front N i 481 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 104 21 Window Front N / 24 0.5801116 -Al 0.53 116-B 0 New Double Non Metal Tinted Suite 104 22 Window Rear S 1 None 25 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 104 23 Window Rear S 2.0 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 104 24 Window Front N 24 0.580 116-A 0.53 116 -Bi 0New I Double Non Metal Tinted Suite 105 25 Window Front N 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 105 26 Window Front N 24 0.580 116-A 0.53 116-B 0 New I Double Non Metal Tinted I Suite 105 (1 U -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. (2) SHGC Type: 116-B Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type SHGC Window Hgt. Wd. Overhanq Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 14 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 15 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 16 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 17 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 18 None 0.76 5.0 5.0 10.0 0.1 10.0 10.0 19 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 20 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 21 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 22 None 0.76 5.0 5.0 10.0 0.1 10.0 10.0 23 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 24 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 25 1 None 1 0.76 1 8.0 6.0 2.0 0.1 2.0 2.0 26 1 None 1 0.76 1 8.0 3.0 2.0 0.1 2.0 2.0 IINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES •� The proposed building Is'In climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a U lighting of at least 0.5 W/ft2. See Section 143(c). If this box Is checked, ENV4-C must be filled out when submitting under the Pii greater than 15 feet, and an LPD for general EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:7 of 102 1 CERTIFICATE OF COMPLIANCE ENV -1-C NAME Calle Estado, LLC RFACES DATE 6/13/2007 # I Surface Type I Area U -Fac. Insulation Cay. Cont. Act. Am. Tilt Cond: Status Joint Appendix IV Reference Location / Comments 41 lWall 1 36 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 204 42 IDoor 11 2 1.450 None R-0.0 90 90 New 28-A1 Suite 204 43 lWall 24 0.580 116-A 24 0.074 R-19 R-0.0 180 1 90 New 09-A5 Suite 204 44 IFloor /1 26 0.037 R-19 R-0.0 0 180 New 20-A4 Suite 204 45 Roof 1 1.731 0.036 R-30 R-0.0 0 0 New 02-A9 Suite 205 46 lWall i 1 180 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 205 47 Wall s 9E 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 205 48 Wall Double Non Metal Tinted 307 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 205 49 Wall Suite 201 51C 0.074 R-19 R-0.0 270 90 New 09-A5 Suite 205 50 Floor 37 Window 26 0.037 R-19 R-0.01 0 180 New 20-A4 Suite 205 51 Roof Front 69 0.036 R-30 R-0.0 0 0 New 02-A9 Suite 206 52 Wall E) 32 0.074 R-19 R-0.0 0 90 New 09-A5 Suite 206 53 Wall i 17E 0.074 R-19 R-0.0 90 90 New 09-A5 Suite 206 54 Wall 23 0.074 R-19 R-0.0 180 90 New 09-A5 Suite 206 55 Wall 13C 0.074 R-19 R-0.0 270 90 New 09-A5 Suite 206 56 Floor 69 0.037 R-19 R-0.0 0 180 New 20-A4 Suite 206 N, E, A. R (New, Existing, Altered, Removed) FENESTRATION SURFACES FMore than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either Issued by NFRC or provide a CEC Default Label Certificate using the default LI -factors from Standards Table 116-A and B. Certificate shall be filed in the contractor's project office during construction and In the building manager's office after construction # TvPe Area U -Fac' SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments Window Rear S 24 0.5801116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 105 Window Rear S 24 0.5801116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 105 9 Window Front N 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 106 30 Window Front N v 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 106 31 Window Front N 24 0.580 116-A 0.53 116 -BI 0 New Double Non Metal Tinted Suite 106 32 Window Left E 24 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 107 33[Window Left E) 48 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 107 34 Window Left E d 24 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 107 35 Window Front N 24 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 201 36 Window Front N / 48 0.580 116-A 0.53 116-B 0 New I Double Non Metal Tinted Suite 201 37 Window Front N 24 0.580 116-A 0.53 116-B 0 New IDouble Non Metal Tinted I Suite 201 38 Window Front NE 36 0.580 116-A 0.53 116-B 1 45 New I Double Non Metal Tinted Suite 201 39 Window Left E) 36 0.580 116-A 0.53 116-B 1 90 New I Double Non Metal Tinted I Suite 201 �1Ll-factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2; Ll -factor SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 27 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 28 None 0.76 5.0 5.0 10.0 0.1 10.0 10.0 29 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 30 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 31 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 32 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 33 None 0.76 8.0 6.0 10.0 0.1 10.0 10.0 34 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 35 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 36 None 0.76 1 8.0 6.0 2.0 0.1 2.0 2.0 37 None 0.76 8.0 3.0 1 2.0 0.1 2.0 2.0 38 None 0.76 6.0 6.0 2.0 0.1 2.0 2.0 39 None 0.76 6.0 6.0 2.0 0.1 2.0 2.0 IINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is In climate zones 2 through 16 and contains an enclosed space with floor area greater than 25,000 ft2, a ceiling height greater than 15 feet, and an LPD for general • lighting of at least 0.5 W/ft2. See Section 143(c). H this box is checked, ENV -4-C must be filled out. when submitting under the Prescriptive Compliance Approach. EnergyPro 4.3 by EnergySoft User Number: 6712 . Job Number: Pane:8 of 102 1 8 CERTIFICATE OF COMPLIANCE ENV -1-C ROJECT NAME Calle Estado, LLC (OPAQUE SURFACES DATE 6/13/2007 • N. E. A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES FMore than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either Issued by NFRC or provide a CEC Default Label Certificate using the default LI -factors from Rtendards Table 116-A and R Certificate shall be filed In the contractors omlect office dudna construction and in the building managers office after construction # Type K�= Statu VAU-4 - -i 'Location Comments SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments Window Rear S None 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 201 Window Front N , 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 j'42 Window Front N i 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 43 Window Front N 0.76 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 44 Window Rear S 0.1 30 0.580 116-A 0.53 116 -BI 180 New Double Non Metal Tinted Suite 202 45 Window Rear S / 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 202 46 lWindow Front N 8.0 3.0 24 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 203 47 Window Front N 4.0 48 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 203 48 Window Front N None 24 0.580 116-A 0.53 116-B • N. E. A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES FMore than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either Issued by NFRC or provide a CEC Default Label Certificate using the default LI -factors from Rtendards Table 116-A and R Certificate shall be filed In the contractors omlect office dudna construction and in the building managers office after construction # Type Area U -Fac? SHGC2 Act. Am. Cond. Stat. Glazing Type Location/ Comments Window Rear S None 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 201 Window Front N , 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 j'42 Window Front N i 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 43 Window Front N 0.76 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 202 44 Window Rear S 0.1 30 0.580 116-A 0.53 116 -BI 180 New Double Non Metal Tinted Suite 202 45 Window Rear S / 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 202 46 lWindow Front N 8.0 3.0 24 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 203 47 Window Front N 4.0 48 0.5801116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 203 48 Window Front N None 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 203 49 Window Rear S 1 2.0 24 0.580 116-A 0.53 116-B 180 New I Double Non Metal Tinted Suite 203 50 Window Rear S / 30 0.580 116-A 0.53 116-B 1801 New I Double Non Metal Tinted Suite 203 51 Window Front N 24 0.580 116-A 0.53 116-B 1 01 New I Double Non Metal Tinted Suite 204 52 Window Front N 48 0.580 116 -'Al 0.53 116-B 1 01 New I Double Non Metal Tinted Suite 204 1 LI -factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Overhanq Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 40 None 0.76 8.0 3.0 10.0 0.1 10.0 10.0 41 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 42 None 0.76 8.0 6.0 2.0 0..1 2.0 2.0 43 None 0.76 8.0 3.0 2.0 0.1 • 2.0 2.0 44 None 0.76 5.0 6.0 4.0 0.1 4.0 4.0 45 None 0.76. 8.0 3.0 4.0 0.1 4.0 4.0 46 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 47 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 48 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 49 None 0.76 8.0 3.0 4.0 0.1 4.0 4.0 50 1 None 0.76 1 5.0 6.0 4.0 0.1 4.0 4.0 51 None 0.76 8.0 3.0 1 2.0 0.1 2.0 2.0 52 INone 1 0.76 1 8.0 6.0 1 2.0 0.1 2.0 2.0 ,INIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building Is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 ft2, a telling height greater than 15 feet, and an LPD for general lighting of at least 0.5 W/fl2. See Section 143(c). If this box Is checked, ENV41-C must be filled out. when submitting under the Prescriptive Compliance Approach. Run Initiation Time: 06113/07 13:20:10 Run Code: 1181766010 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:9 of 102 CERTIFICATE OF COMPLIANCE ENVA -C ECT NAME DATE Calle Estado, LLC 6/13/2007 Surface Insulation Act. Cond' Joint Appendix # Type Area U -Fac. Cay. Cont. Am. Tilt Status IV Reference Location / Comments N, E. A. R (New, Existing, Altered, Removed) FENESTRATION SURFACES FFI�I More than or equal to 10,000 sq.fL of site -built fenestration area must include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default Ll -factors from l Standards Table 116-A and B. Certificate shall be filed In the contractor's project office durinq construction and In the building manager's office after construction # T e Area U -Fac? SHGC2 Act. Am Cond. Stat. Glazing Type Location/ Comments %3 Window Front N O 24 0.580 116-A 0.531116-B 2.0 0 New Double Non Metal Tinted Suite 204 Window Rear S 4.0 30 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 204 55 Window Rear S 4.0 24 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 204 56 Window Front N 0.76 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 205 57 Window Front N 0.1 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 205 58 Window Front N 60 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 205 59 lWindow Front N 8.0 3.0 24 0.5801116-A 0.53 116-B 01 New Double Non Metal Tinted Suite 205 60 Window Front N 4.0 48 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 205 61 Window Front N None 24 0.580 116-A 0.53 116-B 0 New Double Non Metal Tinted Suite 205 62 Window Left E 30 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 205 63 Window Rear S 48 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 205 64 Window Rear S 25 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 205 65 Window Left E 18 0.580 116-A 0.53 116-B 90 New Double Non Metal Tinted Suite 206 1 L1 factor Type: 116-A Default Table from Standards, Table NI -1 Default Table from the ACM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist, Len. H t. 53 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 54 None 0.76 5.0 6.0 4.0 0.1 4.0 4.0 55 None 0.76 8.0 3.0 4.0 0.1 4.0 4.0 56 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 57 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 58 1 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 59 1 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 60 1 None 0.76 8.0 6.0 2.0 0.1 2.0 2.0 61 1 None 0.76 8.0 3.0 2.0 0.1 2.0 2.0 62 None 0.76 5.0 6.0 4.0 0.1 4.0 4.0 63 None 0.76 8.0 6.0 4.0 0.1 4.0 4.0 64 None 0.76 5.0 5.0 4.0 0.1 4.0 4.0 65 None 0.76 iINIMUM SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building is In climate zones 2 through 15 and contains an enclosed space with floor area greater than lighting of at least 0.5 WK. See Section 143(c). If this box Is checked, ENV4-C must be filled out. when submitting a ceiling height greater than 16 feet, and an LPD for general rescriptive Compliance Approach. EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page: 10 of 102 1 CERTIFICATE OF COMPLIANCE ENV -1-C _..PROJECT NAME DATE 1 Calle Estado, LLC 6/13/2007 (OPAQUE SURFACES N, E, A, R (New, Existing, Altered, Removed) FENESTRATION SURFACES F-1More than or equal to 10,000 sq.fL of silebuill fenestration area must Include a label certificate either issued by NFRC or provide a CEC Default Label Certificate using the default 1.1 -factors from Rtand-l. T.N. 11A -A and A Cedificate shall be filed in the contractors nrniect nfitra durinn construction and in the huildinn mananAes nffire after rnnstnirtinn # Type �.A;Window Area U -Fac' SHGC2 Act. Am. Cond. Stat. Glazinq Type Location/ Comments 0.76 Left E 18 0.580116-A 0.531116-13 90 New Double Non Metal Tinted Suite 206 Window Rear S 18 0.580 116-A 0.531116-B 70 1 None 180 New Double Non Metal Tinted Suite 206 68 Window Rear S 18 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 206 69 Window Rear S 181 0.580 116-A 0.53 116-8 180 New Double Non Metal Tinted Suite 206 70 Window Rear S 18 0.5801116-A 0.53 116 -BI 180 New I Double Non Metal Tinted Suite 206 71 lWindow Rear S 18 0.580 116-A 0.53 116-B 180 New Double Non Metal Tinted Suite 206 72 Window Right 16 0.580 116-A 0.53 116-B 270 New Double Non Metal Tinted Suite 206 73 Window Right 48 0.580 116-A 0.53 116-B 270 New Double Non Metal Tinted Suite 206 74 Window Right 16 0.580 116-A 0.53 116-B 270 New Double Non Metal Tinted Suite 206 1 u -tactor 1 ype: 11 ti -A UMUII I eDle from btanoaros, 111018 NI -1 Uetault I able from the AOM Manual Appendix, NFRC Labeled value. 2 SHGC Type: 116-8 Default Table from Standards, COG Center of Glass, NFRC Labeled Value EXTERIOR SHADING ## Exterior Shade Type SHGC Window Hgt. Wd. Overhang Left Fin Right Fin Len. H t. LExt.RExt. Dist. Len. H t. Dist. Len. H t. 66 None 0.76 67 None 0.76 68 None 0.76 69 None 0.76 70 1 None 0.76 71 None 0.76 72 None 0.76 8.0 2.0 10.0 0.1 10.0 10.0 73 None 0.76 8.0 6.0 10.0 0.1 10.0 10.0 74 None 0.76 8.0 2.0 10.0 0.1 10.0 10.0 MUM M SKYLIGHT AREA FOR LARGE ENCLOSED SPACES The proposed building Is in climate zones 2 through 15 and contains an enclosed space with floor area greater than 25,000 1912, a lighting of et least 0.5 W1112. See Section 143(c). If this box is checked, ENV -4-C must be filled out. when submitting under the Pn greater than 15 feet, and an LPD for general 1 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 11 of 102 1 CERTIFICATE OF COMPLIANCE (Part 1 of 3) LTG -1 -C NAME DATE Calle Estado, LLC I 6/13/2007 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING.METHOD (From LTG -5-C) ALLOWED ❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 10 248 � X PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 0 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION (Room #) CONTROL IDENTIFICATION CONTROLTYPE (Auto Time Switch, Dimming, etc.) Check if SPACE CONTROLLED Daylighting NOTES TO FIELD - For Building Department Use Only .:,;.,.!..,}__,:.::.r.;.::;. r;_::.:I_, .. ,-,., ..r,�. .. .. .. !_: .: ... .:.�•= .1;:! :�.' .'i...... .'.:: .. ttr ;•'ra : s ti•�_. '��ir:'! '. :,.!z ,:: '! .. c }*r. .kr^- - ,+ r ��` `1`it.l � •Lr ...._:...... ___,.::_ � .. a, tl.,..�:�,ri`,_T.'Ii .. _F_ _ _.� � - - '.yam �!.. E�::�`s: _''�.+?'F.1::��'f•;. !r.� ii}.�-_ :!. _l }�.. �7•I ' T;.,:. _-,-E•-�',;.,._.;_r.�•,�F. FF,�,,_ Lz �.,,��.-=, L_ �i'r"�=�.=�-z:=_!-!'„-.i- "-�-_�`.',?iT_"i' ,_:'�=:�r: �-�.�t --_— _ _;w "9 _c$c'';�'�:'',.N7'_ � _ _ p.- '4 �•�-f' .,;ktt ��?� „{ G �''• .,.} .: �-_ _>; ,rq :;_._':ii'-`!.., : � �..r ";: •. � � _ ..,. �'�- : ad �L . - ::a'S'T - - ' F � :{ � p+ .. 4 ?f =, � .a'I r.� �t .:_ .: ,.r 1, L '! _F. I__... JJ.;,•.,: :.:,ir'Y iFn .r "t t�' ! r � i�t� �! �j{ �! Ei st.. I�.i I'It�:,'.Ti`, � `I Run Initiation Time: 06/13/07 13:20:10 Run Code: 1181766010 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 12 of 102 INSTALLED WATTS INSTALLED LIGHTING, CONDITIONED SPACES (From LTG -2-C) 10 161 PORTABLE LIGHTING (From LTG -3-C) 87 LIGHTING CONTROL CREDIT, CONDITIONED SPACES (From LTG -4-C) 0 CONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 10,248 INSTALLED LIGHTING, UNCONDITIONED SPACES (From LTG -2-C) 0 LIGHTING CONTROL CREDIT, UNCONDITIONED SPACES (From LTG -4-C) 0 UNCONDITIONED SPACE ADJUSTED INSTALLED LIGHTING POWER 0 ALLOWED INDOOR LIGHTING POWER FOR CONDITIONED SPACES ❑ COMPLETE BUILDING.METHOD (From LTG -5-C) ALLOWED ❑ AREA CATEGORY METHOD (From LTG -5-C) WATTS ❑ TAILORED METHOD (From LTG -5-C) ALLOWED LIGHTING POWER 10 248 � X PERFORMANCE METHOD ❑ COMMMON LIGHTING SYSTEM (From LTG -8-C) ALLOWED INDOOR LIGHTING POWER FOR UNCONDITIONED SPACES From LTG -5-C) 0 MANDATORY INDOOR AND DAYLIGHTING AUTOMATIC CONTROLS CONTROL LOCATION (Room #) CONTROL IDENTIFICATION CONTROLTYPE (Auto Time Switch, Dimming, etc.) Check if SPACE CONTROLLED Daylighting NOTES TO FIELD - For Building Department Use Only .:,;.,.!..,}__,:.::.r.;.::;. r;_::.:I_, .. ,-,., ..r,�. .. .. .. !_: .: ... .:.�•= .1;:! :�.' .'i...... .'.:: .. ttr ;•'ra : s ti•�_. '��ir:'! '. :,.!z ,:: '! .. c }*r. .kr^- - ,+ r ��` `1`it.l � •Lr ...._:...... ___,.::_ � .. a, tl.,..�:�,ri`,_T.'Ii .. _F_ _ _.� � - - '.yam �!.. E�::�`s: _''�.+?'F.1::��'f•;. !r.� ii}.�-_ :!. _l }�.. �7•I ' T;.,:. _-,-E•-�',;.,._.;_r.�•,�F. FF,�,,_ Lz �.,,��.-=, L_ �i'r"�=�.=�-z:=_!-!'„-.i- "-�-_�`.',?iT_"i' ,_:'�=:�r: �-�.�t --_— _ _;w "9 _c$c'';�'�:'',.N7'_ � _ _ p.- '4 �•�-f' .,;ktt ��?� „{ G �''• .,.} .: �-_ _>; ,rq :;_._':ii'-`!.., : � �..r ";: •. � � _ ..,. �'�- : ad �L . - ::a'S'T - - ' F � :{ � p+ .. 4 ?f =, � .a'I r.� �t .:_ .: ,.r 1, L '! _F. I__... JJ.;,•.,: :.:,ir'Y iFn .r "t t�' ! r � i�t� �! �j{ �! Ei st.. I�.i I'It�:,'.Ti`, � `I Run Initiation Time: 06/13/07 13:20:10 Run Code: 1181766010 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 12 of 102 CERTIFICATE OF COMPLIANCE (Part 3 of 3) LTG -1-C PROJECT NAME Calle Estado, LLC DATE 6/13/2007 esigner: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for lighting systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that require an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: Before an occupancy permit is granted for a newly constructed building or space, or a new lighting system system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, LTG -1-A, Forms shall be submitted to the building department that: A. Certifies plans, specifications, installation certificates, and operating and maintenance information meet the requirements of§ 10-103(b) and Title 24 Part 6. Test Description Test Performed B ❑ LTG -2-A: Lighting Control Acceptance Document - Occupancy Sensor Acceptance - Manual Daylight Controls Acceptance 1 - Automatic Time Switch Control Acceptance Equipment requiring acceptance testing ❑ LTG -3-A: Automatic Daylighting Controls Acceptance Document Equipment requiring acceptance testing EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Paw 13 of 102 1 jCERTIFICATE OF COMPLIANCE MECH-1-C NAME Calle Estado, LLC DATE 6/13/2007 Jesigner: This form is to be used by the designer and attached to the plans. Listed below are all the acceptance tests for mechanical systems. The designer is required to check the boxes by all acceptance tests that apply and list all equipment that requires an acceptance test. If all equipment of a certain type requires a test, list the equipment description and the number of systems to be tested in parentheses. The NJ number designates the Section in the Appendix of the Nonresidential ACM Manual that describes the test. Also indicate the person responsible for performing the tests (i.e. the installing contractor, design professional or an agent selected by the owner). Since this form will be part of the plans, completion of this section will allow the responsible party to budget for the scope of work appropriately. Building Departments: SYSTEM ACCEPTANCE. Before an occupancy permit is granted for a newly constructed building or space, or a new space -conditioning system serving a building or space is operated for normal use, all control devices serving the building or space shall be certified as meeting the Acceptance Requirements for Code Compliance. In addition a Certificate of Acceptance, MECH-I-A Form shall be submitted to the building department that certifies plans, specifications, installation certificates. and ooeratina and maintenance information meet the requirements of Section 10-103(b) and Title 24 Part 6. STATEMENT OF COMPLIANCE ❑ MECH-2-A: Ventilation System Acceptance Document -Variable Air Volume Systems Outdoor Air Acceptance -Constant Air Volume Systems Outdoor Air Acceptance Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. ❑ MECH-3-A: Packaged HVAC Systems Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. MECH-4-A: Air -Side Economizer Acceptance Document Equipment requiring acceptance testing Test required on all New systems both New Construction and Retrofit. Units with economizers that are installed at the factory and certified with the commission do not require equipment testing but do require construction Inspection. ❑ MECH-5-A: Air Distribution Acceptance Document Equipment requiring acceptance testing This test required If the unit serves 5,000 82 of space or less and 25% or more of the ducts are in nonconditioned or semiconditioned space like an attic. New systems that meet the above requirements. Retrofit systems that meet the above requirements and either extend ducts, replace ducts or replace the packaged unit. ❑ MECH-6-A: Demand Control Ventilation Acceptance Document Equipment requiring acceptance testing All new DCV controls installed on new or existing packaged systems must be tested. ❑ MECH-7-A: Supply Fan Variable Flow Control Acceptance Document Equipment requiring acceptance testing All new VA fan volume controls installed on new or existing systems must be tested ❑ MECH-8-A: -Hydronic System Control Acceptance Document -Variable Flow Controls Applies to chilled and hot water systems. -Automatic Isolation Controls Applies to new boilers and chillers and the primary pumps are connected to a common header. -Supply Water Temperature Reset Controls Applies to new constant flow chilled and hot water systems that have a design capacity greater than or equal to 500,000 Btulhr. -Water-loop Heat Pump Controls Applies to all new watedoop heat pump systems where the combined loop pumps are greater than 5 hp. -Variable Frequency Controls Applies to all new distribution pumps on new variable Bow chilled, hydronic heat pump or condenser water systems where the pumps motors are greater than 5 hp. Equipment re uiring acceptance testing EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page:14 of 102 INDOOR LIGHTING SCHEDULE (Part 1 of 2) LTG -2-C ECT NAME Calle Estado, LLC INSTALLED LIGHTING POWER FOR CONDITIONED SPACES DATE 3/2007 Luminaire Lamps/Ballasts Installed Watts C D E F G H I J Name Type Description �r �3 ro U c 5yv N.-0 m m o r 3m� p y r- CO �'mv ! 7.� ro ro m o c �'� NCH m M ivm _ (7 � Yas No r 3 c m.�Q _ ro m y X m - N ro n Metallux 2G-3-32ED F32T8 3 32 1.5 93.0 X 105 9.765 Metallux 6313 1 30 1.0 29.0 116 Portfolio C6032 F 32WGX24 -3 1 32 1.0 35.0 X 8 280 PAGE TOTAL 10 161 BUILDING TOTAL (sum of all pages) 10,161 PORTABLE LIGHTING (From LTG -3-C) 87 CONTROL CREDIT (From LTG -4-C) O ADJUSTED ACTUAL WATTS 10 248 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Pape: 15 of 102 1 PORTABLE LIGHTING WORKSHEET LTG -3-C PROJECT NAME DATE Calle Estado, LLC 1 6/13/2007 (TABLE 1 - PORTABLE LIGHTING NOT SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET I A B C D ROOM # DEFAULT OR ZONE ID Wls ft AREA TOTAL WATTS SF B X C Suite 102 0.2 433 87 G ROOM # PORTABLE LIGHTING OR ZONE ID Description # OF FIXT. LUMIN. WATTS PER FIXTURE TASK AREA (SF) # OF TASK AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) Suite 104 484 1 484 TOTAL 433 87 TABLE 2 - PORTABLE LIGHTING SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET A B TOTAL WATTS C D E F G ROOM # PORTABLE LIGHTING OR ZONE ID Description # OF FIXT. LUMIN. WATTS PER FIXTURE TASK AREA (SF) # OF TASK AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) Suite 104 484 1 484 Suite 105 433 1 433 Suite 106 1 578 1 578 ite 107 405 1 405 quite 201 619 1 619 Suite 202 728 1 728 Suite 203 1 781 1 781 Suite 204 860 1 860 TOTAL 4,888 0 TABLE 3 - PLANS SHOW PORTABLE LIGHTING IS NOT REQUIRED FOR OFFICE AREAS > 250 SQUARE FEET ROOM # TOTAL AREA OR ZONE ID (SF) TOTAL 0 Designer needs to provide detailed documentation that the lighting level provided by the overhead lighting meets the needs of the space. The details Include luminaire types and mounting locations relative to work areas. BUILDING SUMMARY - PORTABLE LIGHTING 7771 BUILDING SUMMARY TOTAL AREA (SF) (FROM TABLES 1+2+3) TOTAL WATTS BUILDING TOTAL 7,744 87 I EnergvPro 4.3 by EnergvSoft User Number: 6712 Job Number: Page: 16 of 102 1 PORTABLE LIGHTING WORKSHEET LTG -3-C NAME Calle Estado, LLC DATE 6/13/2007 ITABLE 1 - PORTABLE LIGHTING NOT SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET A B C D ROOM # OR ZONE ID DEFAULT W/s ft AREA TOTAL WATTS SF B X C ROOM # OR ZONE ID PORTABLE LIGHTING Description # OF FIXT. LUMIN. WATTS PER FIXTURE TASK # OF AREA TASK (SF) AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) Suite 205 1,733 1 1,733 Suite 206 690 1 690 TOTAL 0 0 TABLE 2 - PORTABLE LIGHTING SHOWN ON PLANS FOR OFFICE AREAS >250 SQUARE FEET A B BUILDING TOTAL C D E F G ROOM # OR ZONE ID PORTABLE LIGHTING Description # OF FIXT. LUMIN. WATTS PER FIXTURE TASK # OF AREA TASK (SF) AREAS TOTAL AREA (SF) (D x E) TOTAL WATTS (C x E) Suite 205 1,733 1 1,733 Suite 206 690 1 690 TOTAL 2.423 0 a 1 P%LJL-G J - rLP%IyV JI IVYY rVr\I P11_11 -G LIVrI I IIYV IJ ROOM # TOTAL AREA OR ZONE ID (SF) TOTALI 0 BUILDING SUMMARY - PORTABLE LIGHTING Designer needs to provide detailed documentation that the lighting level provided by the overhead lighting meets the needs of the space. The details include luminaire types and mounting locations relative to work areas. BUILDING SUMMARY TOTAL AREA (SF) (FROM TABLES 1+2+3) TOTAL WATTS BUILDING TOTAL 7,744 87 ..In. EnergyPro 4.3 by Energy5oft User Number. 6712 Job Number: Page: 17 of 102 1 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C NAME Calle Estado, LLC ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation . Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation )uct Insulation PRESCRIPTIVE MEASURES DATE 6/13/2007 AIR SYSTEMS, Central or Single Zone HVAC -4 HVAC -2 HVAC -2.5 1 1 1 Reference on Plans or Specification 1 112(a) 8.60 HSPF 7.50 HSPF 7.70 HSPF 112(a) 12.5 SEER / 10.8 EER 12.5 SEER / 10.9 EER 12.3 SEER / 10.7 EER 112(b) Yes Yes Yes 112(c), 115(a) n/a n/a n/a 121(b) Yes Yes Yes 121 b 123 cfm 108 cfm 121 cfm 121 c No No No 121c Yes Yes Yes 121 c 122(e) Programmable Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Require 122 Auto Auto Auto 122 n/a n/a n/a 123 124 R-4.2 R-4.2 R4.2 Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. 144 a & b n/a n/a n/a 144 a & b 29,355 btuh 14,990 btuh 18,737 btuh 144 a & b n/a n/a n/a 144 a & b 29,312 btuh 17,616 btuh 21,538 btuh 144 c Constant Volume Constant Volume Constant Volume 144 c 144 c Yes Yes Yes 144 d No No No 144 a No Economizer No Economizer No Economizer 144 Constant Temp Constant Temp Constant Tem 144(f) Constant Temp Constant Temp Constant Temp 144 k No No No I EneravPro 4.3 by EneravSoft User Number: 6712 Job Number. Pane: IS of 102 , I AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C PROJECT NAME DATE 1 Calle Estado, LLC 1 6/13/2007 ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation )uct Insulation PRESCRIPTIVE MEASURES AIR SYSTEMS, Central or Single Zone HVAC -2 HVAC -2 HVAC 2.5 1 1 1 Reference on Plans or Specification 1 112(a) 7.50 HSPF 7.50 HSPF 7.70 HSPF 112(a) 12.5 SEER / 10.9 EER 12.5 SEER 110.9 EER 12.3 SEER / 10.7 EER 112(b) Yes Yes Yes 112 c , 115(a) n/a n/a n/a 121(b) Yes Yes Yes 121 b 121 cfm 108 cfm 144 cfm 121 c No No No 121 c Yes Yes Yes 121(c), 122 a Pro rammable Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Auto Auto Auto 122(g) n/a n/a n/a 123 124 R-4.2 R-4.2 R-4.2 Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. ' 144 a & b n/a n/a n/a 144 a & b 14,990 btuh 14,990 btuh 18,737 btuh 144 a & b n/a n/a n/a 144 a & b 18,790 btuh 18,760 btuh 22,916 btuh 144 c Constant Volume Constant Volume Constant Volume 144 c 144 c Yes Yes Yes 144 d No No No 144 a No Economizer No Economizer No Economizer 144 Constant Temp Constant Temp Constant Tem 144(f) Constant Temp Constant Temp Constant Temp 144 k No No No I EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page:19 of 102 1 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C ECT NAME Calle Estado, LLC ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation )uct Insulation PRESCRIPTIVE MEASURES DATE 6/13/2007 AIR SYSTEMS Central or Single Zone HVAC 2 HVAC -3 HVAC -3 1 1 1 Reference on Plans or Specification t 112(a) 7.50 HSPF 7.10 HSPF 7.10 HSPF 112(a) 12.5 SEER / 10.9 EER 12.0 SEER / 10.5 EER 12.0 SEER / 10.5 EER 112(b) Yes Yes Yes 112(c), 115(a),n/a 18,765 btuh n/a n/a 121(b) Yes Yes Yes 121 b 101 cfm 155 cfm 182 cfm 121 c No No No 121 c Yes Yes Yes 121(c), 122(e) Programmable Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Required Heating & Cooling Required 122 Auto Auto Auto 122 n/a n/a n/a 123 124 R-4.2 R-4.2 R4.2 Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant -Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. 144 a & b n/a n/a n/a 144 a & b 14,990 btuh 21,860 btuh 21,860 btuh 144 a & b n/a n/a n/a 144 a & b 18,765 btuh 26,872 btuh 26,916 btuh 144 c Constant Volume Constant Volume Constant Volume 144 c 144 c Yes Yes Yes 144 d No No No 144 a No Economizer No Economizer No Economizer 144 Constant Temp Constant Temp Constant Tem 144 (f) Constant Temp Constant Temp Constant Temp 144 k No No No Kun initiation lime: 06/13/07 13:20:10 KUn Code: 1181766010 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:20 of 102 AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C ECT NAME Calle Estado, LLC ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones Pipe Insulation )uct insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.432 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sqft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. DATE 6/13/2007 AIR SYSTEMS, Central or Sln le Zone HVAC -3 HVAC -4 HVAC -4 1 1 2 Reference on Plans or Specification 1 112(a) 7.10 HSPF 7.20 HSPF 7.20 HSPF 112(a) 12.0 SEER 110.5 EER 12.0 SEER / 10.5 EER 12.0 SEER / 10.5 EER 112(b) Yes Yes Yes 112(c), 115(a) n/a n/a n/a 121(b) Yes Yes Yes 121 b 195 cfm 215 cfm 433 cfm 121 c No No No 121 c Yes Yes Yes 121(c), 122(e) Program able Switch Programmable Switch Programmable Switch 122(e) Heating & Cooling Required Heating & Cooling Require Heating & Cooling Require 122 Auto Auto Auto 122 n/a n/a n/a 123 124 R-4.2 I R-4.2 R-4.2 144 a & b n/a n/a n/a 144 a & b 21,860 btuh 29,355 btuh 58,710 btuh 144 a & b n/a n/a n/a 144 a & b 27,047 btuh 37,514 btuh 74,956 btuh 144 c Constant Volume Constant Volume Constant Volume 144 c 144 c Yes Yes Yes 144 d No No No 144 a No Economizer No Economizer No Economizer 144 Constant Temp Constant Temp Constant Tem 144 (f) Constant Temp Constant Temp Constant Temp 144 k No No No AIR SYSTEM REQUIREMENTS Part 1 of 2 MECH-2-C NAME Calle Estado, LLC DATE 6/13/2007 AIR SYSTEMS, Central or Sin le Zone ITEM OR SYSTEM TAG(S) HVAC -3.5 Number of Systems 1 T-24 MANDATORY MEASURES Section Reference on Plans or Specification 1 Heating Equipment Efficiency Cooling Equipment Efficiency Heat Pump Thermostat Furnace Controls Natural Ventilation Minimum Ventilation VAV Minimum Position Control Demand Control Ventilation Time Control Setback and Setup Control Outdoor Damper Control Isolation Zones _Pipe Insulation )uct Insulation PRESCRIPTIVE MEASURES Calculated Heating Capacity x 1.43 2 Proposed Heating Capacity 2 Calculated Sensible Cooling Capacity x 1.212 Proposed Sensible Cooling Capacity 2 Fan Control DP Sensor Location Supply Pressure Reset (DDC only) Simultaneous Heat/Cool Economizer Heating Air Supply Reset Cooling Air Supply Reset Duct Sealing for Prescriptive Compliance 112(a) 7.20 HSPF 112(a) 12.0 SEER / 10.4 EER 112(b) Yes 112c,115a n/a 121(b) Yes 121 b 172 cfm 121 c No 121 c Yes 121(c), 122(e), Programmable Switch 122(e) Heating & Cooling Required 122 Auto 122(g) n/a 123 124 R-4.2 144 a & b n/a 144 a & b 25,607 btuh 144 a & b n/a 144 a & b 32,259 btuh 144 c Constant Volume 144 c) 144 c Yes 144 d No 144 a No Economizer 144 Constant Tem 144 (f) Constant Temp 144 k No 1: For each central and single zone air systems (or group of similar units) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Not required for hydronic heating and cooling. Either enter a value here or put in reference of plans and specificatons per footnote 1. 3: Enter Yes if System is: Constant Volume, Single Zone; Serves < 5,000 sgft; Has > 25% duct in unconditioned space. Duct sealing is required for Prescriptive Compliance, see PERF -1 for performance method duct sealing requirements. I EnergyPro 4.3 by EnerovSoft User Number: 6712 Job Number: Paae:22 of 102 1 WATER SIDE SYSTEM REQUIREMENTS Part 2 of 2. MECH-2-C PROJECT NAME DATE r Calle Estado, LLC 6/13/2007 2 WATER SIDE SYSTEMS: Chillers, Towers, Boilers, H dronic Loops ITEM OR SYSTEM TAG(S) Number of Systems T-24 MANDATORY MEASURES Section Reference on Plans or Specification Equipment Efficiency 112(a) Pipe Insulation 1123 PRESCRIPTIVE MEASURES Calculated Capacity Proposed Capacity Tower Fan Controls Tower Flow Controls Variable Flow System Design Chiller and Boiler Isolation CHW and HHW Reset Controls WLHP Isolation Valves VSD on CHW, CW & WLHP Pumps > 5 HP DP Sensor Location 144 (a & b) AO SMITH ELJF-10 144 (a & b) 99% 144 h 144 h n/a 144 it n/a 144 ' n/a 144 0) n/a 144 ' 144 6) 144 ' 1: For each chiller, cooling tower, boiler, and hydronic loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" in the column. 2: Water side systems include wet side system using other liquids such as glycol or brine. Service Hot Water, Pool Heating ITEM OR SYSTEM TAG(S) DHW Heater Number of Systems 2 MANDATORY MEASURES Reference on Plans or Specification Water Heater Certification Water Heater Efficiency Service Water Heating Installation Pool and Spa Efficiency and Control Pool and Spa Installation Pool Heater - No Pilot Light Spa Heater - No Pilot Light 113 (a) AO SMITH ELJF-10 113 b 99% 113 (c) 114 a n/a 114 b n/a 115 (c) n/a 115 d n/a 1: For each water heater, pool heat and domestic water loop (or groups of similar equipment) fill in the reference to sheet number and/or specification section and paragraph number where the required features are documented. If a requirement is not applicable, put "N/A" ins the column. I EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page:23 of 102 1 MECHANICAL VENTILATION MECH-3-C NAME Calle Estado, LLC DATE 6/13/2007 PRESCRIPTIVE REHEAT LIMITATION Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E I F G H I J I K L M N ZONEISYSTEM0 D O m .o n N -n �'� x D ; n m 3 o- V N M 0-00 C O m n x cni C n 19 o x ID 0 �, C n>� -n r. rn U2 7 O m 0 -n cn C O V O 3 W x y O w 3 m o 3 x O U, %° v O U) ren fD Suite 101 82C 0.15 123 1 1 123 123 HVAC -4 Total 123 123 Suite 102 43 0.15 65 65 108 HVAC -2 Total 65 108 Suite 103 484 0.15 73 73 121 HVAC -2.5 Total 73 121 Suite 104 484 0.15 73 73 121 HVAC -2 Total 73 121 Suite 105 432 0.15 65 65 108 HVAC -2 Total 65 108 Suite 106 57E 0.151 87 87 144 VAC 2.5 Total 87 144 Suite 107 40 0.15 61 61 101 HVAC 2 Total 61 101 Suite 201 61S 0.15 93 93 155 HVAC -3 Total 93 155 Suite 202 72E 0.151 109 109 182 HVAC -3 Total 109 182 Suite 203 78 0.15 117 117 195 HVAC -3 Total 117 195 Suite 204 86C 0.15 129 129 215 HVAC -4 Total 129 215 Suite 205 1,73 0.15 260 260 433 HVAC -4 Total 260 433 Suite 206 69C 0.151 104 104 172 C Minimum ventilation rate per Section 121 Table 121-A E Based on fb(ed seat or the greater of the expected number of occupants and 50% of the CBC occupant load foregress purposes fors aces without fixed seatin . H Required Ventilation Air REO'D V.A. is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS column D or G). I Must b0 greater than orequal to H or use Transfer Air column N to make up the difference. J Design fan supply dm Fan CFM x 30%; or K Condition area fl. sq.) x 04 dm/fL sq.: or L Maximum of Columns H, J. K or 300 dm M This must be less than orequal to Column L and greater that orequal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 24 of 102 MECHANICAL VENTILATION MECH-3-C PROJECT NAME Calle Estado, LLC DATE 6/13/2007 PRESCRIPTIVE REHEAT LIMITATION Section 144(d)) MECHANICAL VENTILATION Section 121(b)2) AREA BASIS OCCUPANCY BASIS VAV MINIMUM A B C D E F G H I J K L M N ZONE/SYSTEM o D T� R G fn c aon @ n T °o �'� x D o n A 'il v °1 m3 °a m I o v m n o 3 7 m O x c n T'O T v'� v3rn y10 o x %i M C "' D m O f) ro 3 r. (n D 7 N W �' n o 3 c o 'O fD ' o TW M N o A rP c c wad o y x 0 M -n _ 3t CO)T.of ::3 o 3 3 7 D ai m D HVAC -3.5 Total 104 172 C Minimum ventilation rate per Section 121 Table 121-A E Based on fixed seat or the greater of the expected number of occupants and 50% of the CBC occupant load fore ress purposes fors aces without fixed sealing. H Required Ventilation Air REO'D VA. is the larger of the ventilation rates calculated on and AREA or OCCUPANCY BASIS column D or G). I Must be greater than orequal to H or use Transfer Air column N to make up the difference. J Design fan supply cfm Fan CFM x 30%; or K Condition area ft. sq.) x 04 cfm/fL sq.: or L Mabmum of Columns H, J. K, or 300 cfm M This must be less than orequal to Column L and greater that arequal to the sum of Columns H + N. N Transfer air must be provided where the Required Ventilation Air (column 1) is greater.than the Design Minimum Air (column M). Where required, transfer air must be greater than or equal to the difference between the Required Ventilation Air (column 1) and the Design Minimum Air (column M), column H - M. EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page: 25 of 102 MECHANICAL EQUIPMENT DETAILS Part 1 of 2 MECH-S-C� PROJECT NAME DATE Calle Estado LLC 6/13/2007 HILLER ND TOWER SUMMARY Energy Factor or RE Efficiency Tons PUMPS System Type Distribution Type Equipment Name Equipment Type Qty. Tot Qty GPM BHP Motor Eff. Drive Eff. Pump Control 5,120 10 New 0.95 n/a n/a 8.60 HSPF 47,500 12.5 SEER / 10.8 EER New No Economizer Carrier 3BYRA02433 Split DX 4 24,000 0.0 7.50 HSPF 24,000 12.5 SEER / 10.9 EER New No Economizer Carrier 38YRA03033 Split DX 2 30,000 0.0 MULTI -FAMILY CENTRAL WATER HEATING DETAILS Hot Water P mp Hot Water Piping Len th ft New Control # HP Type In Plenum Outside Buried DHW / B I ER SUMMARY ',ENTRAL SYSTEM RATINGS Energy Factor or RE Standby Loss or Pilot TANK INSUL. System Name System Type Distribution Type Qty Rated Input Vol. Gals.) Condition Status Ext. R -Val. O SMITH ELJF-10 Small Elec. All Pipes Ins 2 5,120 10 New 0.95 n/a n/a 8.60 HSPF 47,500 12.5 SEER / 10.8 EER New No Economizer Carrier 3BYRA02433 Split DX 4 24,000 0.0 7.50 HSPF 24,000 12.5 SEER / 10.9 EER New No Economizer Carrier 38YRA03033 Split DX 2 30,000 0.0 MULTI -FAMILY CENTRAL WATER HEATING DETAILS Hot Water P mp Hot Water Piping Len th ft New Control # HP Type In Plenum Outside Buried Add 1/2" Insulation 12.0 SEER / 10.5 EER New No Economizer Carrier 50JX0485 Packaged DX 3 47,000 0.0 7.20 HSPF 48,000 12.0 SEER / 10.5 EER New No Economizer Carrier 50JX0423 Packaged DX 1 41,000 0.0 7.20 HSPFj 41,500 12.0 SEER / 10.4 EER New No Economizer ',ENTRAL SYSTEM RATINGS Fan Type HEATING CFM I BHP COOLING Drive Eff. System Name System Type Qtv Output Aux. kW Eff. output Efficienc Condition Status Economizer Type Carrier 38YRA04833 Split DX 1 47,000 0.0 8.60 HSPF 47,500 12.5 SEER / 10.8 EER New No Economizer Carrier 3BYRA02433 Split DX 4 24,000 0.0 7.50 HSPF 24,000 12.5 SEER / 10.9 EER New No Economizer Carrier 38YRA03033 Split DX 2 30,000 0.0 7.70 HSPF 28,600 12.3 SEER / 10.7 EER New No Economizer Carrier 50JX0365 Packa ed DX 3 35,000 0.0 7.10 HSPF 35,000 12.0 SEER / 10.5 EER New No Economizer Carrier 50JX0485 Packaged DX 3 47,000 0.0 7.20 HSPF 48,000 12.0 SEER / 10.5 EER New No Economizer Carrier 50JX0423 Packaged DX 1 41,000 0.0 7.20 HSPFj 41,500 12.0 SEER / 10.4 EER New No Economizer CENTRAL SYSTEM FAN SUMMARY Clippl V FAN 109M IRN FAN System Name Fan Type Motor Location CFM I BHP Motor Eff. Drive Eff. CFM BHP Motor Eff. Drive Eff. Carrier 38YRA04833 Constant Volume Draw -Through 1,600 0.50 76.00 97.0% none Carrier 3$YRA02433 Constant Volume Draw -Through 800 0.25 64.0% 97.0% none Carrier 38YRA03033 Constant Volume Draw -Through 1,000 0.33 64.0% 97.0% none Carrier 50JX0365 Constant Volume Blow -Through 1,200 0.33 64.0% 97.0% none Carrier 50JX0485 Constant Volume Blow -Through 1,600 0.50 76.0% 97.0% none Carrier 50JX0423 Constant Volume Blow -Through 1,400 0.501 76.0%1 97.0%1 none Run Initiation Time: 06/13/07 13:20:10 Run Code: 1181766010 EnergyPro 4.3 by Energysoft User Number: 6712 Job Number: Page: 26 of 102 ENVELOPE MANDATORY MEASURES ENV-MM ECT NAME Calle Estado, LLC DATE 6/13/2007 DESCRIPTION Designer Enforcement ❑X §118(a) Installed Insulating Material shall have been certified by the manufacturer to comply with the California Quality Standards for insulating material, Title 20, Chapter 4, Article 3. F§118(c) All Insulating Materials shall be installed In compliance with the flame spread rating and smoke density requirements of Sections 2602 and 707 of Title 24, Part 2. a§ 117(a) All Exterior Joints and openings in the building that are observable sources of air leakage shall be caulked, gasketed, weatherstripped or otherwise sealed. §116(b) Site Constructed Doors, Windows and Skylights shall be caulked between the unit and the building, and shall be weatherstripped (except for unframed glass doors and fire doors). FX -1 § 116(a)1 Manufactured Doors and Windows installed shall have air Infiltration rates not exceeding those shown in Table Number 1-E. of the Standards. Manufactured, fenestration products must be labeled for U -value according to NFRC procedures. RX §118(e) Demising Walls in Nonresidential Buildings: The opaque portions of framed demising walls in nonresidential buildings shall have insulation with an installed R -value of no less than R-13 between framing members. EnergyPro By EnergySoft User Number: User Job Number: Page:27 of 102 BROOM CAVITY RATIO WORKSHEET (RCR>=3.5) LTG -7-C ROJECT NAME Calle Estado, LLC CUMENTATION AUTHOR DATE ANGULAR SPACES -r A B C D E F Room Name Task/Activity Description Room Length (L) ft Room Width (W) ft Room Cavity Height (H) (ft) Room Cay. Ratio 5xHx(L+W) /(LXW) A B C D E F Room Name Task/Activity Description Room Area (A) (sf) Room Perimeter (P) (ft) Room Cavity Height (H) (ft) Room Cay. Ratio 2.5 x H x P /A 'I EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:28 of 102 CERTIFICATE DF COMPLIANCE (Part 1 of 2) OLTG-1-C PROJECT NAME DATE Calle Estado, LLC 6/13/2007 ,-ROJECT ADDRESS ,a Desert Club Dr. & Calle Estado La Quinta-' PRINCIPAL DESIGNER - LIGHTING TELEPHONE Hegge Electrical Contractors 760 775-4855`:.�y�;4�'�::;..t,"-' DOCUMENTATION AUTHOR TELEPHONECecke:.bl .a"f Scott Design & Title 24 (760) 200-4780 GENERAL INFORMATION DATE OF PLANS OUTDOOR LIGHTING ZONE 0 LZ1 0 LZ2 © LZ3 ❑ LZ4 FUNCTION TYPE OUTDOOR LIGHTING �' OUTDOOR SIGNS INDOOR SIGNS PHASE OF CONSTRUCTION ® NEW CONSTRUCTION 0 ADDITION 0 ALTERATION STATEMENT OF COMPLIANCE This Certificate of Compliance lists the outdoor lighting system specifications need to comply with Title 24, Parts 1 and 6 of the California Code of Regulations. This certificate applies only to building lighting requirements. The documentation preparer hereby certifies that the documentation is accurate and complete. DOCUMENTATION AUTHOR SIGNATURE DATE Tim Scott The Principal Lighting Designer hereby certifies that the proposed outdoor lighting and signs design represented in this set of construction documents is consistent with the other compliance forms and worksheets, with the specifications, and with any other calculations submitted with this permit application. The proposed building has been designed to meet the lighting requirements contained in Sections 110, 119, 130 through 132, and 146,and 149 of Title 24, Part 6. .Tease Check One: (These sections of the Business and Professions Code are printed in full in the Nonresidential Manual.) F] I hereby affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code to sign this document as the person responsible for its preparation; and that I am licensed in the State of California as a civil engineer or electrical engineer, or I am a licensed architect. I affirm that I am eligible under the provisions of Division 3 of the Business and Professions Code by Section 5537.2 or 6737.3 to sign this document as the person responsible for its preparation; and that I am a licensed contractor performing this work. ❑ I affirm that I am eligible under the exemption to Division 3 of the Business and Professions Code to sign this document because it pertains to a structure or type of work described as exempt pursuant to Business and Professions Code Sections 5537, 5538 and 6737.1. Heqqe Electrical Contractors SIGNATURE box if worksheet is LIC. # ®OLTG-1-C: Certificate of Compliance. Required on plans for all submittals for outdoor lighting. Part 2 of 2 maybe incorporated in schedules on the Either LTG -1-C or OLTG-I-C may be used for signs as follows: 1. Use LTG -1-C if the project consists solely of indoor signs. 2. Use LTG -1-C if the project consists of indoor lighting, outdoor or indoor signs, but no other outdoor lighting. 3. Use OLTG-1-C if the project consists solely of outdoor signs. 4. Use OLTG-I-C if the project consists of outdoor lighting, outdoor or indoor signs, but no other indoor lighting. ®OLTG-2-C: LIGHTING COMPLIANCE SUMMARY. Applicable parts required for ALL outdoor lighting allowances (Except Signs). OLTG-3-C: AREA CALCULATIONS WORKSHEET. Applicable parts required for all outdoor area calculations. OLTG-4-C: SIGN LIGHTING COMPLIANCE. Required for all internally and externally illuminated signs, for both indoor and outdoor signs. I EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:29 of 102 1 CERTIFICATE OF COMPLIANCE (Part 2 of 2) OLTG-1-C ROJECT NAME Calle Estado. LLC h ' S d I Plans Sh w that Otd uoor L' hY Meets Allowed Li htin P LA tih DATE 6/13/2007 n C e U VOW" o I In ower ❑ Lighting power allowance for general site illumination on OLTG-2-C Part 1 of 4 ❑X Not Applicable ❑ ❑X Lighting power allowance for local ordinances or for security multipliers on OLTG-2-C Part 2 of 4 Not Applicable ❑X ❑ Lighting power allowances for specific applications, other than vehicle service stations with canopies on OLTG-2-C Part 3 of 4 Not Applicable ❑ X ❑ Lighting power allowances for vehicle service station canopies on OLTG-2-C part 4 of 4 Not Applicable ❑ ❑X Sign lighting compliance on OLTG-4-C Not Applicable Mandatory Measures on Plans Show that Outdoor Liahtina Meets Outdoor Lightinci Controls And Eauinment ❑X ❑ Installed lighting power has been determined in accordance with Section 130(c)1 Not Applicable ❑X ❑ All permanently installed luminaires with lamps rated over 100 Watts either have a lamp efficacy of at least 60 lumins per Watt or are controlled by a motion sensor per Section 132(a) Not Applicable ❑X All Luminaires with lamps rated greater than 175 Watts in hardscape area, including parking lots, building entrances, canopies, and all outdoor sales areas meet the Cutoff Requirements of Section 132(b) Not Applicable ❑X ❑ All permanently Installed outdoor lighting meets the control requirements of Section 132(c)l Not Applicable ❑X ❑ Building facades, parking lots, garages, canopies, and outdoor sales areas meet the Multi -Level Lighting Requirements of Section 132(c) Not Applicable MANDATORY AUTOMATIC CONTROLS CONTROL IDENTIFICATION =F10 T #F CE16 - CONTROL LOCATION (Room #) CONTROL TYPE (Auto Time Switch, Dimming, etc.) AREA CONTROLLED EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page: 30 of 102 LIGHTING COMPLIANCE SUMMARY (Part 3 of 4) OLTG-2-C Name Calle Estado, LLC Date 6/13/2007 LIGHTING POWER ALLOWANCE FOR SPECIFIC APPLICATIONS able 147-B - Other than Vehicle Station without Canopies Allotted Watts Luminalre Lam s/Ballasts Design Watts A B C D E F G H I J K L M N O P Lighting Application Category (Table 147.13)i r D a o..� �.w a n r'� D �° m rmc. MP ry o o c oo# m xo. 0 c� d n o a ru Description v y.n rcc �-' °� � o ' -fid .� v3 m � d 3 Sm 0) m ra d 3 ^ v m oo o" 3y 5 E-0 o m c m 3 0 E m m -• = m f1 p cD c c Z 3° .3 Mc q m N° `) u', xm5'i Z am .. ° � o ' f om L G � , IN v O Ext Task 1,87 0.35 655 50w Low Voltage Halogen 50 Watt 1 50 1.0 54.0 X 43 43 Ext Task 27 38.50 10,626 50w Low Voltage Halogen L L�'Watt 1 50 1.0 54.0 X 18 97 97 Lamp EnergyPro 4.3 by EnergySoft User Number: 6712 - Job Number: Pane: 31 of 102 1 ILLUMINATED AREA CALCULATION WORKSHEET (Part 3 of 5) OLTG-3-C DJECT NAME Calle Estado, LLC outdoor Sales Lot Frontage and Sales Lot Area DATE 6M W2007 A B I C I D I E I F G H Gross Illuminated Area (sq. ft.) If an Outdoor Sales Frontage Allotment was used, subtract that area from the Gross Illuminated Area Overlapping Areas of Another Application Sales Lot Area (A - F - G) Mounting height of Sales Frontage Luminaires (feet) 3 x B Distance (In pla view) from the frontagge luminaire to fron edge of Sales Lot Sales Lot Frontage Length (feet) Sales Frontage Area (C - D) x E (sq. ft.) Area for which Illumination is Net Area Designated Name and Orientation Length Height Gross Area (B x C) Areas covered by signs Obstructed by Other Objects and Area Not Illuminated Sub total (E + F) Available for Facade Lightin (g - G? Ext Task 1 156 1 12 1.872 a t? 1 1.872 ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. Q Section 147 (c)2 B - Measured in plan view, only illuminated sections of outdoor sales frontage areas that are immediately adjacent to the principle viewing location and unobstructed viewing length, and are within 3 mounting heights of the frontage have been used. Luminaires qualifying for this allowance are located in plan view between the principle viewing location and the frontage sales. r 'IB. Buildina Facade Area A B C D E I F I G H Areas (SF) to Subtract from within the Illuminated Area Area for which Illumination is Net Area Designated Name and Orientation Length Height Gross Area (B x C) Areas covered by signs Obstructed by Other Objects and Area Not Illuminated Sub total (E + F) Available for Facade Lightin (g - G? Ext Task 1 156 1 12 1.872 a t? 1 1.872 Checklist ❑ Section 147 (c)1 B - Each portion of all illuminated areas has been assigned only one lighting application, and the applications are consistent with actual use of the areas. ] Section 147 (c)2 A - Only facades areas that are illuminated without obstruction or interference, by one or more luminaires, have been used. EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page:32 of 102 1 LIGHTING MANDATORY MEASURES LTG -MM NAME Calle Estado, LLC DATE 6/13/2007 DESCRIPTION Designer Enforcement FX §131(d)1 For every floor, all interior lighting systems shall be equipped with a separate automatic control to shut off the lighting. This automatic control shall meet the requirements of Section 119 and may be an occupancy sensor, automatic time switch, or other device capable of automatically shutting off the lighting. §131 (d)2 Override for Building Lighting Shut-off: The automatic building shut-off system is provided with a manual, accessible override switch in sight of the lights. The area of override is not to exceed 5,000 square feet. FX §119(h) §119(h) Automatic Control Devices Certified: All automatic control devices specified are certified, all alternate equipment shall be certified and installed as directed by the manufacturer. X❑ §111 Fluorescent Ballast and Luminaires Certified: All fluorescent fixtures specified for the project are certified and listed in the Directory. All installed fixtures shall be certified. R§132 Tandem Wiring for One and Three Lamp Fluorescent Fixtures: All one and three lamp fluorescent fixtures are tandem wired with two lamp ballasts where required by Standards Section 132; or all one and three lamp fluorescent fixtures are specified with electronic high -frequency ballasts and are exempt from tandem wiring requirements. FX §131(a) §131(a) Individual Room/Area Controls: Each room and area in this building is equipped with a separate switch or occupancy sensor device for each area with floor -to - ceiling walls. §131(b) Uniform Reduction for Individual Rooms: All rooms and areas greater than 100 square feet and more than 0.8 watts per square foot of lighting load shall be controlled with bi-level switching for uniform reduction of lighting within the room. §131(c) Daylight Area Control: All rooms with windows and skylights that are greater than 250 square feet and that allow for the effective use of daylight in the area shall have 50% of the lamps in each daylit area controlled by a separate switch; or the effective use of daylight cannot be accomplished because the windows are continuously shaded by a building on the adjacent lot. Diagram of shading during different times of the year is included on plans. ❑ §131(e) Display Lighting. Display lighting shall be separately switched on circuits that are 20 amps or less. EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page:33 of 102 MECHANICAL MANDATORY MEASURES Part 1 of 2 MECH-MM ECT NAME Calle Estado, LLC DATE 6/13/2007 DESCRIPTION Designer Enforcement Equipment and Systems Efficiencies R§111 Any appliance for which there is a California standard established In the Appliance Efficiency Regulations will comply with the applicable standard. ❑ § 115(a) Fan type central furnaces shall not have a pilot light. 0 § 123 Piping, except that conveying fluids at temperatures between 60 and 105 degrees Fahrenheit, or within HVAC equipment, shall be insulated in accordance with Standards Section 123. R § 124 Air handling duct systems shall be installed and Insulated in compliance with Sections 601, 602, 603, 604, and 605 of the 2001 CMC Standards. Controls § 122(e) Each space conditioning system shall be installed with one of the following: R§ 122(e)1A Each space conditioning system serving building types such as offices and manufacturing facilities (and all others not explicitly exempt from the requirements of Section 112 (d)) shall be installed with an automatic time switch with an accessible manual override that allows operation of the system during off -hours for up to 4 hours. The time switch shall be capable of programming different schedules for weekdays and weekends and have program backup capabilities that prevent the loss of the device's program and time setting for at least 10 hours If power is interrupted; or §122(e)IB An occupancy sensor to control the operating period of the system; or F] § 122(e)1C A 4 -hour timer that can be manually operated to control the operating period of the system. a§ 122(e)2 Each space conditioning system shall be installed with controls that temporarily restart and temporarily operate the system as required to maintain a setback heating and/or a setup cooling thermostat setpoint. . F] § 122(g) Each space conditioning system serving multiple zones with a combined conditioned floor area more than 25,000 square feet shall be provided with Isolation zones. Each zone: shall not exceed 25,000 square feet; shall be provided with Isolation devices, such as valves or dampers, that allow the supply of heating or cooling to be setback or shut off Independently of other isolation areas; and shall be controlled by a time control device as described above. ® § 122(a&b) Each space conditioning system shall be controlled by an individual thermostat that responds to temperature within the zone. Where used to control heating, the control shall be adjustable down to 55 degrees F or lower. For cooling, the control shall be adjustable up to 85 degrees F or higher. Where used for both heating and cooling, the control shall be capable of providing a deadband of at least 5 degrees F within which the supply of heating and cooling is shut off or reduced to a minimum. X❑ § 122(c) Thermostats shall have numeric setpoints In degrees Fahrenheit (F) and adjustable setpoint stops accessible only to authorized personnel. §112(b) Heat pumps shall be installed with controls to prevent electric resistance supplementary heater operation when the heating load can be met by the heat pump alone. EnergyPro By EnergySoft User Number: User Job Number: Page: 34 of 102 MECHANICAL MANDATORY MEASURES Part'2 of 2 MECH-MM NAME Calle Estado, LLC DATE 6/13/2007 Description Designer Enforcement Ventilation a§ 121(e) Controls shall be provided to allow outside air dampers or devices to be operated at the ventilation rates as specified on these plans. F] § 122(q Gravity or automatic dampers interlocked and closed on fan shutdown shall be provided on the outside air intakes and discharges of all space conditioning and exhaust systems. X❑ § 122(f) All gravity ventilating systems shall be provided with automatic or readily accessible manually operated dampers In all openings to the outside, except for combustion air openings. ❑ § 121(f)1 Air Balancing: The system shall be balanced in accordance with the National Environmental Balancing Bureau (NEBB) Procedural Standards (1983), or Associated Air Balance Council (AABC) National Standards (1989); or ❑ § 121(f)2 Outside Air Certification: The system shall provide the minimum outside air as shown on the mechanical drawings, and shall be measured and certified by the Installing licensed C-20 mechanical contractor and certified by (1) the design mechanical engineer, (2) the installing licenced C-20 mechanical contractor, or (3) the person with overall responsibility for the design of the ventilation system; or F§ 121(f)3 Outside Air Measurement: The system shall be equipped with a calibrated local or remote device capable of measuring the quantity of outside air on a continuous basis and displaying that quantity on a readily accessible display divice; or § 121(f)4 Another method approved by the Commission. Service Water Heating Systems ❑ § 113(b)2 If a circulating hot water system is installed, it shall have a control capable of automatically turning off the circulating pump(s) when hot water Is not required. 0 § 113(c) Lavatories in restrooms of public facilities shall be equipped with controls to limit the outlet temperature to 110 degrees F. EnergyPro By EnergySoft User Number: User Job Number. Page: 35 of 102 1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 YSTEM NAME FLOOR AREA I HVAC -4 820 crm per system -i,duu Airflow (cfm) 1,600 Airflow (cfm/sgft) . 1.95 Airflow (cfm/Ton) 404.2 Outside Air (%) 7.7 Outside Air (cfm/sgft) 0.15 Note: values above given at ARI conditions 26.0 OF Outside Air 123 cfm 69.6 OF 12.0 177.9 OF Outside —�-7 123 cfm 74.7 / 65.0 OF 4.3 —. n, Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM I Sensible Latent 'CFM I Sensible 1,613 22,363 3,743 1,097 15,174 0 1,118 759 0 0 123 4,888 1,052 123 5,70 0 0 1,118 759 29,4881 7 4=795 22 392 Carrier 38YRA04833 29,312 13,743 29,355 Total Adjusted System Output 28,312 13,743 29,355 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am earn Temperatures at Time of Heating Peak) 83.4 OF 83.4 OF Heating Coil Supply Air Ducts Supply Fan 83.0 OF 1600 cfm ROOMS 70.0 OF Return Air Ducts I i,irstream Temperatures at 77.5 / 66.2 OF ® 60.3 / 59.4 OF User Number: 6712 Cooling Coil of Cooling Peak) 60.3 / 59.4 of a Supply Air Ducts Supply Fan 61.0 / 59.7 °F 1600 cfm 61.6% R.H. ROOMS 74.0/64.8°F irl Return Air Ducts I Job Number: of 102 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 STEM NAME FLOOR AREA HVAC -2 433 ENGINEERING CHECKS SYSTEM LOAD 836 Number of Systems . 1 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts COIL COOLING PEAK COIL HTG. PEAK 11 4doatinn SvctAm CFM I Sensiblel Latent I I CFM I Sensible 836 Output per System 24,000 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts Total Output (Btuh) 24,000 Output (Btuh/sgft) 55.4 Cooling System Output per System 24,000 Total Output (Btuh) 24,000 Total Output (Tons) 2.0 836 12,608 1,977 609 7,052 12 779 0 216.5 630 353 0 0 108 4,292 1,215 108 5,02 800 0 1.85 0 630 353 12.0 / 77.9 of Outside Air 108 cfm 74.7164.3 a 79.8/66.40F M 59.1 / 58.0 of Cooling Coil Supply Fa 800 cfm 59.1 / 58.0 of Supply Air Ducts Fan 59.8 / 58.3 of 58.6% R.H. ROOMS 74.0 / 64.0 of 11 Return Air Ducts 4 Energypro 4.3 by EnergySoft User Number: 6712 Job Number. Page:37 of 102 1 Total Output (Btuh/sqft) 55.4 TOTAL SYSTEM LOAD 1 18,1621 3 19 12 779 Total Output (sgft/Ton) 216.5 Air System HVAC EQUIPMENT SELECTION CFM per System 800 Carrier 3BYRA02433 17,616 4,197 Total Adjusted System Output 17,616 4,197 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm 14,990 F 14,990 Jan 12 am Airflow (cfm) 800 Airflow (cfm/sgft) 1.85 Airflow (cfm/Ton) 400.0 Outside Air (%) 13.5 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 63.7 OF 81.3 OF 81.3 OF Supply Air Ducts Outside Air Hi 108 cfm o Heating Coil Supply Fan 80.9 F 800 cfm ROOMS 69.6 of 70.0 of Return Air Ducts I DOLING SYSTEM PSYCHROMETRICS (Airstream Temueratures at Time of Cooling Peakl 12.0 / 77.9 of Outside Air 108 cfm 74.7164.3 a 79.8/66.40F M 59.1 / 58.0 of Cooling Coil Supply Fa 800 cfm 59.1 / 58.0 of Supply Air Ducts Fan 59.8 / 58.3 of 58.6% R.H. ROOMS 74.0 / 64.0 of 11 Return Air Ducts 4 Energypro 4.3 by EnergySoft User Number: 6712 Job Number. Page:37 of 102 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 {STEM NAME FLOOR AREA I HVAC -2.5 484 Total Room Loads eturn Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts 'OTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM I Sensible Latent I CFM I Sensible 1,196 17,886 2,209 924 11,115 0 894 556 0 0 12 4,785 1,382 121 5,599 0 0 894 556 24,4651 3=592 17 825 Carrier 38YRA03033 21,538 4,356 18,737 Total Adjusted System Output 21,538 4,356 18,737 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm an 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 64.2 OF 81.8 OF 81.8 OF Q Supply Air Ducts s�. Outside Air 121 cfm o Heating Coil Supply Fan 81.3 F 1000 cfm ROOMS 70.0 of 69.5 of TOOLING SYSTEM 12.0 / 77.9 of Outside Air 121 cfm 174.8 / 64.2 of ETRICS h Return Air Ducts drstream Temperatures at Time of Cooling Peak) 79.3 / 66.2 of 59.1 / 58.0 of 59.1 / 58.0 of Supply Air Ducts Cooling Coil Supply Fan 59.9 / 58.4 of 1000 cfm 58.4% R.H. ROOMS 74.0 / 64.0 of 4.3 by EnergySoft User Number. 6712 Return Air Ducts Job Number: of 102 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME Calle Estado, LLC STEM NAME I HVAC -2 ATING SYSTEM PSYCHROMETRICS 26.0 of 62.9 of Outside Air 121 cfm 69.4 OF 12.0 / 77.9 OF out— j--� side Air 121 cfm - 178.7/66.81F Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA 484 COIL COOLING PEAK COIL HTG. PEAK CFM I Sensible Latent CFM Sensible 759 12,567 11957 917 9,662 0 628 483 0 0 12 4,283 833 121 5,593 0 0 628 483 18,107 2,79 16 22 Carrier 38YRA02433 18,790 3,870 14,990 Total Adjusted System Output18 790 3,870 14,990 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am Heating Coil 80.5 of Supply Fan 800 cfm 80.5 of —� Supply Air Ducts 79.9 of ROOMS 70.0 of �% Return Air Ducts 4 83.8/68.70F = 61.7/60.50F Cooling Coil Supply Fa 800 cfm 61.7 / 60.5 of --,j Supply Air Ducts Fan 62.4 / 60.7 of 55.6% R.H. ROOMS 78.0/66 6 °F o a..... A;. In.. EnergyPro 4.3 by Energysoft User Number. 6712 Job Number. Page: 39 of 102 I HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME Calle Estado, LLC STEM NAME I HVAC -2 Fair ay5tem CFM per System 800 Airflow (cfm) 800 Airflow (cfm/sgft) 1.85 Airflow (cfm/Ton) 400.0 Outside Air (%) 13.5 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions 26.0 OF Outside Air 108 cfm r,Q 7 OP Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA COIL COOLING PEAK COIL HTG. PEAK CFM I Sensible Latent I CFM I Sensible 628 10,857 1,75 607 7,030 0 543 352 0 0 108 3,843 895 -10 8 5,02 0 0 543 352 15,7861 2,6461 12 754 Carrier 38YRA02433 18,760 3,696 14,990 Total Adjusted System Output 18,760 3,696 14,990 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm I an 12 am Cream Temperatures at Time of Heating Peak) 81.3 OF 81.3 OF Supply Air Ducts Heating Coil Supply Fan 809 OF 800 cfm ROOMS 69.6 of 70.0 of Return Air Ducts I TOOLING SYSTEM PSYCHROMET 12.0 / 77.9 of �> V0 4 Outside Air 108 cfm 78.6166.4 of 83.2/68.10F W 61.1/59.90F Cooling Coil Supply Fa 800 cfm 61.1 / 59.9 of —� Supply Air Ducts Fan 61.8/60.1OF 54.2% R.H. ROOMS 78.0 / 66.2 of h Return Air Ducts 4 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page: 40 of 102 1 EVAC SYSTEM HEATING AND COOLING LOADS SUMMARY NAME Calle Estado, LLC NAME HVAC 2.5 Number of Systems Heating System Output per System Total Output (Btuh) Output (Btuh/sqft) Cooling System Output per System Total Output (Btuh) Total Output (Tons) Total Output (Btuh/sgft) Total Output (sgft/Ton) Air System CFM per System Airflow (cfm) Airflow (cfm/sqft) Airflow (cfm/Ton) Outside Air (%) Outside Air (cfm/sgft) Note: values above given at ARI conditions JEATING SYSTEM PSYCHROMETR 1 30,000 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts 30,000 51.9 Latent 28,600 28,600 2.4 L' -"1I I TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA COIL COOLING PEAK COIL HTG. PEAK CFM Sensiblel Latent I CFM I Sensible 72 11,955 2,337 695 7,82 0 598 39 0 0 144 5,142 953 144 6,710 0 0 598 391 18,2991 3,2901 15 313 1,000 1,000 Carrier 3BYRA03033 22,916 4,064 18,737 1.73 419.6 14.4 Total Adjusted System Output A22 916 4,064 18,737 (Adjusted for Peak Design Conditions) 0.25 TIME OF SYSTEM PEAK Jul 3 F Jan 12 am (Airstream Temperatures at Time of Heatina Peak) 26.0 of 63.3 of im Outside Air 144 cfm Heating Coil 69.6 of :.00LING SYSTEM PSYCHROMETRI 112.0 / 77.9 of Outside Air 144 cfm 78.6/66.9 of 4.3 80.9 of Supply Fan 1000 cfm 80.9 of —� Supply Air Ducts 80.6 of ROOMS 70.0 of �% Return Air Ducts 4 183.4/68.60F W 61.9/60.60F User Number. 6712 Cooling Coil Supply Fa 1000 cfm 61.9 / 60.6 of Supply Air Ducts Fan 62.4 / 60.8 of 55.9% R.H. ROOMS 78.0 / 66.7 of Return Air Ducts Job Number: 1 of 102 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 ,:(STEM NAME FLOOR AREA HVAC 2 405 Airflow (cfm/sgft) 1.98 Airflow (cfm/Ton) 400.0 Outside Air (%) 12.7 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS Airs1 26.0 OF 64.0 OF mo Outside Air 101 cfm Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM ISensiblel Latent I CFM Sensible 60 10,595 1,638 632 7,534 0 530 377 0 0 10 3,597 9111 10,4,693 0 r 0 530 377 15 25 7275491 12 98 arrier 38YRA02433 18,765 3,583 14,990 Total Adjusted System Output 18,765 3,583 14,990 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am Time of Heating Peak) 81.7 of SupplyAir Ducts Heating Coil Supply Fan 81'2 of 800 cfm ROOMS 69.6 of 70.0 of Return Air Ducts I �OOLING S 12.0 / 77.9 of Outside �� 101 cfm 178.6 / 66.2 of CS (Airstream Temperatures at Time 82.8/67.90F 60.8/59.60F y. Cooling Coil Supply Fa 800 cfm of Cooling Peak) 60.8 / 59.6 of Supply Air Ducts Fan 61.4/59.8OF 53.5% R.H. ROOMS 78.0 / 66.0 OF Return Air Ducts EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Pane:42 of 102 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME Calle Estado, LLC YSTEM NAME 1 HVAC -3 Number of Output per System Total Output (Btuh) Output (Btuh/sgft) ooling System Output per System Total Output (Btuh) Total Output (Tons) Total Output (Btuh/sqft) Total Output (sgft/Ton) 35,000 Total Room Loads 35,000 Return Vented Lighting 56.5 CFM per System Airflow (cfm) Airflow (cfm/sgft) Airflow (cfm/Ton) Outside Air (%) Outside Air (cfm/sgft) Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS 26.0 of 64.0 of 64.0 of Outside Air 155 cfm OOLING S 112.0 / 77.9 of Outside _.-'"� 155 cfm 78.7 l 66.9 of DATE 6/13/2007 FLOOR AREA 619 COIL COOLING PEAK - Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD CFM 35,000 35,000 2.9 56.5 212.2 CFM per System Airflow (cfm) Airflow (cfm/sgft) Airflow (cfm/Ton) Outside Air (%) Outside Air (cfm/sgft) Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS 26.0 of 64.0 of 64.0 of Outside Air 155 cfm OOLING S 112.0 / 77.9 of Outside _.-'"� 155 cfm 78.7 l 66.9 of DATE 6/13/2007 FLOOR AREA 619 COIL COOLING PEAK I COIL HTG. PEAK CFM Sensible Latent CFM F Sensible 1,102 17,990 2,503 905 10,292 0 899 515 0 0 155 5,483 1,02 155 7,180 0 0 899 515 25,2771 7 3:57241 18 50 1200 1,200 Carrier 50JX0365 26,872 6,066 21,860 1.94 411.4 12 9 Total Adjusted System Output 26,872 6,066 21,860 (Adjusted for Peak Design Conditions) 0.25 TIME OF SYSTEM PEAK Jul 3 pm I Jan 12 am (Airstream Temperatures at Time of Heatina Peak) Supply Fan Heating Coil 1200 cfm 81.10F PSYCHROMETRICS (Airstream T 83.0 / 68.5 of ` 83.0 / 68.5 of ,si, Supply Air Ducts 80.7 of ROOMS 70.0 of . Return Air Ducts eratures at Time of Cooling Peak) 62.0 / 60.8 of S I A' D t Supply Fan Cooling Coil 1200 cfm 1 Return Air Ducts upp y Ir uc s 62.7 / 61.0 of 55.9% R.H. ROOMS 78.0/66.7OF I EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. . Paae:43 of 102 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 STEM NAME FLOOR AREA HVAC -3 728 Number of Systems 1 Heating System Output per System 35,000 Total Output (Btuh) 35,000 Output (Btuh/sgft) 48.1 Cooling System Output per System 35,000 Total Output (Btuh) 35,000 Total Output (Tons) 2.9 Total Output (Btuh/sgft) 48.1 Total Output (sgft/Ton) 249.6 Air System CFM per System 1,200 Airflow (cfm) 1,200 Airflow (cfm/sqft) 1.65' Airflow (cfm/Ton) 411.4 Outside Air (%) 15.2 Outside Air (cfm/sgft) 0.25 69.6 OF 12.0 / 77.9 OF Outside Air 182 cfm 78.7/67.4 °F Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent I CFM Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS Airs1 837 26.0 OF 63.0 OF 63.0 °F 0 i5Y �y� Outside Air 182 182 cfm 69.6 OF 12.0 / 77.9 OF Outside Air 182 cfm 78.7/67.4 °F Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent I CFM I Sensible 1,070 16,748 2,944 928 9,629 0 837 48 0 0 182 6,458 888 182 8,449 0 0 837 481 24,8d --37831 1 19,04 arrier 50JX0365 26,916 6,382 21,860 Total Adjusted System Output 26,916 6,382 21,860 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am am Temperatures at Time of Heating Peak) 80.1 OF Supply Fan Heating Coil 1200 cfm MA; n....a. as at Time of Cc 83.7 / 69.1 OF 83.7/69.10F HE 62.6/61.40F Supply Fan 1200 cfm I Cooling Coil �..F..rr. A:. r%.._i Supply Air Ducts 79.7 OF ROOMS 70.0 OF Supply Air Ducts 63.3 / 61.7 of 57.6% R.H. ROOMS 78.0 / 67.2 OF EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page:44 of 102 MVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado, LLC 6/13/2007 STEM NAME FLOOR AREA HVAC -3 781 k.rm per aysrnm 1,/ -UV Airflow (cfm) 1,200 Airflow (cfm/sgft) 1.54 Airflow (cfm/Ton) 411.4 Outside Air (%) 16.3 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent CFM Sensible 1,408 21,167 3,158 1,271 12,278 0 1,058 614 0 0 195 6,893 760 195 9,043 0 0 1,058 614 30,1761 3-9181 22 549 Carrier 50JX0365 27,047 6,468 21,860 Total Adjusted System Output 27047 6,468 21,860 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 62.4 OF 62.40 79.6 °F °rtl Supply Air Ducts Outside Air 195 cfm'` 79.1 OF Supply Fan Heating Coil 1200 cfm , ROOMS 69.5 OF 70.0 OF Return Air Ducts I 12.0 177.9 OF Outside Air 195 cfm 78.8/67.7 °F 84.2/69.5°F ' 84.2/69.5°F M 63.0/61.8°F N4�% t Supply Fan 1200 cfm t• t. 4.3 by EnergySoft User Number: 6712 Cooling Coil h Return Air Ducts '*I Job Number. n Supply Air Ducts 63.9/62.1°F 58.6% R.H. ROOMS 78.0 / 67.5 OF I of 102 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Calle Estado LLC 6/13/2007 kSTEM NAME FLOOR AREA I' HVAC -4 860 Number of Systems I 1 Output per System 47,000 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD Total Output(Btuh) 47,000 Output (Btuh/sgft) 54.7 ioling System Output per System 48,000 Total Output (Btuh) 48,000 Total Output (Tons) 4.0 Total Output (Stuh/sgft) 55.8 Total Output (sgft/Ton) 215.0 Air System CFM per System 1,600 Airflow (cfm) 1,600 Airflow (cfm/sgft) 1.86 Airflow (cfm/Ton) 400.0 Outside Air (%) 13.4 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions 26.0 OF )� Outside Air 215 cfm 69.6 of 12.0 / 77.9 of �-7 Outside Air 215 cfm 178.6 / 66.4 of 63.8 of 63.8 of COIL COOLING PEAK COIL HTG. PEAK CFM I Sensible Latent CFM I Sensible 1,223 21,219 3,477 1,145 12,939 0 1,061 647 0 0 215 7,637 1,796 215 9,98 0 0 1,061 647 30.9781 5274 24 214 Carrier 50JX0485 37,514 7,370 29,355 Total Adjusted System Output 37,514 7,370 29,355 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm I an 12 am ream Temperatures at Time of Heatina Peak) 81.0 of Supply Fan Heating Coil 1600 cfm EM PSYCHROMETRICS (Airstream Tem 83.1 / 68.1 of 83.1/68.10F M Supply Air Ducts 80.6 of ROOMS 70.0 of Return Air Ducts I watures at Time of Cooling Peak) 61.1 / 59.8 of S I A' D t Supply Fan Cooling Coil 1600 cfm h Return Air Ducts "I upp y lr uc s 61.7 / 60.1 of 54.1% R.H. ROOMS 78.0 66.2 of I EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page:46 of 102 1 1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY I.PROJECT NAME Calle Estado, LLC STEM NAME I HVAC -4 Outside Air (%)13.5 COIL HTG. PEAK Outside Air (cfm/sgft) 0.25 69.7 of 112.0 / 77.9 of Outside er—� 433 cfm 78.6166.4 o f Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA 1.733 COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent I CFM Note: values above given at ARI conditions EATING SYSTEM PSYCHROMETRICS Airsti 1,901 26.0 of 63.8 of 63.8 of 0 Outside Air 433 cfm W ' 15,419 69.7 of 112.0 / 77.9 of Outside er—� 433 cfm 78.6166.4 o f Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA 1.733 COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent I CFM I Sensible 2,182 38,013 7,008 1,847 21,046 0 1,901 1,052 0 0 433 15,419 3,61 433 20,145 0 0 11901 1,052 57,233 10,618 F 43-2951 Carrier 50JX0485 74,956 14,815 58,710 Total Adjusted System Output 74,956 14,815 58,710 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Jul 3 pm Jan 12 ann Supply Fan Heating Coil 3200 cfm h Return Air Ducts 15 20METRICS (Airstream Temperatures at Time of Cool 83.1 / 68.1 of 83.1/68.1'F M 61.1/59.80F Supply Fan Cooling Coil 3200 cfm n_...__ A:. M._a. Supply Air Ducts 80.7 of ROOMS 70.0 of Supply Air Ducts 61.6 / 60.0 of 54.2% R.H. ROOMS 78.0/66.2OF I I EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Pane:47 of 102 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME Calle Estado LLC STEM NAME I HVAC -3.5 Airflow (cfm/sgft) 2.03 Airflow (cfmlTon) 404.8 Outside Air (%) 12.3 Outside Air (cfm/sgft) 0.25 Note: values above given at ARI conditions (EATING SYSTEM PSYCHROM 26.0 of 64.2 of 4 Outside Air 172 cfm 69.6 OF Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD DATE 6/13/2007 FLOOR AREA 690 COIL COOLING PEAK I COIL HTG. PEAK CFM ISensiblel Latent I CFM I Sensible 1,348 22,915 2,790 1,104 12,869 0 1,146 643 0 0 172 6,097 1,415 172 7,998 0 0 1,146 643 31,3671 4 205 22 154 Carrier 50JX0423 32,259 6,511 25,607 Total Adjusted System Output 32,259 6,51 25,607 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 3 pm an 12 am 64.2 of 81.4 of Supply Fan Heating Coil 1400 cfm res at h Return Air Ducts 'I Supply Air Ducts 81.0 of ROOMS 70.0 of DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 112.0 / 77.9 of 82.9 / 68.0 of 82.9 / 68.1 of 61.2 / 60.O of sir _ Supply Air Ducts Outside Air 172 cfm Supply Fan Cooling Coil 62.0 / 60.3 OF 1400 cfm 54.3% R.H. ROOMS 78.8/66.50F 78.0/66.2OF Return Air Ducts I EnergyPro 4.3 by Energy5oft User Number: 6712 Job Number: Page:48 of 102 1 ROOM LOAD SUMMARY :7::] PROJECT NAME Calle Estado, LLC DATE 6/13/2007 STEM NAME HVAC -4 FLOOR AREA 820 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM I SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 101 Suite 101 1 1,613 22,363 3,743 1,613 22,363 •3 743 1,097 15,174 PAGE TOTAL 1 1,613 22,363 3,743 1,097 15,174 TOTAL 1 1,613 22,363 3,743 1,097 15,174 EnergyPro By EnergySoft User Number: User Job Number: Page:49of 1 22 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 STEM NAME HVAC -2 FLOOR AREA 433 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 102 Suite 102 1 836 12,608 1,977 836 12,608 1,977 609 7,052 .ry PAGE TOTAL 1 836 12,608 1,977 6091 7,052 TOTAL 836 12,608 1 1,977 609 7,052 EnergyPro By Energysoft User Number: User Job Number. Page -.50 of 102 ROOM LOAD SUMMARY NAME DATE Calle Estado, LLC 6/13/2007 STEM NAME HVAC -2.5 TFLOOR AREA 484 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 103 Suite 103 1 1,199 17,938 2,211 1,196 17,886 2,209 924 11,115 EnergyPro By EnergySoft User Number. User Job Number: Page:51 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 . STEM NAME HVAC -2 FLOOR AREA 484 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 104 Suite 104 1 759 12,567 1,957 759 12,567 1,957 917 9,662 H. EnergyPro By EnergySoft User Number. User Job Number. Page:52 of 102 ROOM LOAD SUMMARY 1. PROJECT NAME Calle Estado, LLC DATE 6/13/2007 (STEM NAME HVAC -2 FLOOR AREA 433 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 105 Suite 105 1 628 10,857 1,751 628 10,857 1 751 607 7,030 PAGE TOTAL 1 628 10,857 1,751 607 F 7,030 TOTAL L. 628 10,857 1,751 607 7,030 EnergyPro By EnergySoft User Number. User Job Number. Page:53 of 102 ROOM LOAD SUMMARY PROJECT NAME DATE Calle Estado, LLC - 1 6/13/2007 - STEM NAME HVAC 2.5 FLOOR AREA 578 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 106 Suite 106 1 725 12,022 1,943 721 11,955 2,337 695 7,821 EnergyPro By EnergySoft User Number: User Job Number: Page:54 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 STEM NAME HVAC 2 FLOOR AREA 405 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 107 Suite 107 1 601 10,595 1,638 601 10,595 1,638 632 7,534 EnergyPro By EnergySoft User Number. User Job Number: Page:55 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 KSTEM NAME HVAC -3 FLOOR AREA 619 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 201 Suite 201 1 1,106 18,046 2,505 1,102 17,990 2,503 905 10,292 Ener9YPro By EnergySoft User Number: User Job Number: Page:56of 102 ROOM LOAD SUMMARY (NAME Calle Estado, LLC NAME HVAC -3 DATE 6/13/2007 FLOOR AREA 728 EnergyPro By EnergySoft User Number: User Job Number: Page:57 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 . STEM NAME HVAC -3 FLOOR AREA 781 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 203 Suite 203 1 1,408 21,167 3,158 1,408 21,167 3,158 1,271 12,278 EnergyPro By EnergySoft User Number. User Job Number. Page:58 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 STEM NAME HVAC -4 FLOOR AREA 860 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 204 Suite 204 1 1,223 21,219 3,477 1,223 21,219 3,477 1 145 12,939 EnergyPro By EnergySoft User Number. User Job Number. Page:59 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 NSTEM NAME HVAC -4 FLOOR AREA 1,733 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 205 Suite 205 1 2,182 38,013 7,008 2,182 3-80-13- 7,008 1 847 21,046 PAGE TOTAL 1 2,182 38,013 7,008 1,847 21,046 TOTAL 2082 F 38,013 7,008 1,847 21,046 Energ Pro By EnergySoft User Number: User Job Number: Page:60 of 102 ROOM LOAD SUMMARY PROJECT NAME Calle Estado, LLC DATE 6/13/2007 STEM NAME HVAC -3.5 FLOOR AREA 690 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Suite 206 Suite 206 1 1,385 23,555 2,079 1,348 22,915 2,790 1,104 12,869 PAGE TOTAL 1 1,348 22,915 2,790 1,104 12,869 TOTAL 1 1,348 22,915 2,790 1,104 12,869 Eneropm By EnergySoft User Number. User Job Number. Pege:61 of 102 a00M HEATING PEAK LOADS Project Title Date )alle Estado LLC 16/13/2007 Room Information Desi n Conditions Room Name Suite 101 Time of Peak Jan 12 am Floor Area 820 Outdoor Dry Bulb Temperature 26OF Indoor Dry Bulb Temperature 70°F Conduction Metal Tinted Area U -Value X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 0.0740 X X X X X X X X X X X X X X X X X X X X x X X X X X X X X X X X X X X X X X X 0.5800 0.5800 0.5800 0.5800 0.0740 0.5800 0.0740 0,5800 0.0740 0.5800 0.5800 0.0740 0.7300 OT OF Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room: page Total: 11 974 Infiltration: r 1.001 X 1.064 X 820 X 10.00 X 0.500 / 6] X I = 3200 schedule Air Sensible Area Ceiling Height ACH 6T Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7 15174 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 62 of 102 ROOM HEATING PEAK LOADS Title Room Name Floor Area Indoor Dry Bulb Temperature Conduction uesic n conditions Suite 102 Time of Peak 433 Outdoor Dry Bulb Temperature 70 OF Area U -Value AT OF 3/2007 Jan 12 am 26 OF Items shown with an asterisk (•r) denote conduction through an interior surface to another room. Page Total: 5 363 Infiltration: 1.00 x 1.064 x 433 x 10.00 x 0.500 / 60] x 44 = 1 690 cheduie Air Sensible Area Ceiling Height ACH 6T Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7 052 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page:63 of 102 69.0 X X X X X X X X X x x X X X x X X x X X x X X x x X x X X x x X X X X X X x X 0.0740 X X X X X X X X X X X X X X X X X X X x X X X X X X X X X X X X X X X X X X X 44 = = = = = = = = = = = = 225 24.0 0.5800 44 612 48.0 0.5800 44 1,225 24.0 0.5800 44 612 116.0 0.0740 44 378 24.0 0.5800 44 612 25.0 0.5800 44 638 perimeter = 33.0 0.7300 44 1,060 Items shown with an asterisk (•r) denote conduction through an interior surface to another room. Page Total: 5 363 Infiltration: 1.00 x 1.064 x 433 x 10.00 x 0.500 / 60] x 44 = 1 690 cheduie Air Sensible Area Ceiling Height ACH 6T Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7 052 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page:63 of 102 ROOM HEATING PEAK LOADS - project Title Date .}aIle Estado, LLC 6/13/2007 Room Information Desi n Conditions Room Name suite 103 Time of Peak Jan 12 am Floor Area 484 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70 OF Conduction Area U -Value 134.0 X X X X x X X X X X x X X x X X X X X X X X X X X X X X X X X X X X x X X X X 0.0740 X X X X x x x X X X x X X X X X x X x x x x x x X X X X x X x X X x X X x X j X 24.0 0.5800 48.0 0.5800 24.0 0.5800 181.0 0.0740 24.0 0.5800 25.0 0.5800 241.0 0.0740 24-0 perimeter = 68.0 0.7300 AT OF Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 9 226 Infiltration: 1 1.00 x 1.064 x a84 x 10.00 x o.500 / 60]x 44 = 188s schedule Air Sensible Area Ceiling Height ACH pT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 11,115 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 64 of 102 R®®M HEATING PEAK LOADS Project Title Date jalle Estado LLC 16/13/2007 Room Information Desi n Conditions Room Name Suite 104 Time of Peak Jan 12 am Floor Area 484 Outdoor Dry Bulb Temperature 26OF Indoor Dry Bulb Temperature 70 OF Conduction Area LI -Value 134.0 X X x X x X X X X X X X x X X X X X X X X X X X x X X X X X X X X X X X x X X 0.0740 x X X X x X X X X x x X X x x X X x X x x x X x x X x X X x x X X x X x X x J X 24.0 0.5800 48.0 0.5800 24.0 0.5800 265.0 0.0740 181.0 0.0740 25.0 0.5800 24.0 0.5800 perimeter68.0 0 Z�T of Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 7 773 Infiltration: 1.001 X 1.064 X 484 X 10.00 X 0.500 / 60] X 44 = 1 889 chedule Air Sensible Area Ceiling Height ACH pT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 9,662 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 65 of 102 ROOM HEATING PEAK LOADS roject Title %colla Fctarin I I C; Date Room Information Desi n Conditions Room Name Suite 105 Time of Peak Jan 12 am Floor Area 433 Outdoor Dry Bulb Temperature 26 OF Indoor Dry Bulb Temperature 70 OF 48.0 Conduction Area U -Value 69.0 x X X X x X X x x x X X X X x X X X X X x X X X X X x X X X X x X X X X X X x 0.0740 X X X X x X X x x X x x x X X x X x X x x X X x x X x X X x X x X x X X X X x 24.0 0.5800 48.0 0.5800 24.0 0.5800 117.0 0.0740 24.0 0.5800 24.0 0.5800 erimeter = 33.0 0.7300 AT of Btu/hr 225 612 1,225 612 381 612 612 1.060 Items shown with an asterisk ('r) denote conduction through an interior surface to another room. Page Total: 5340 Infiltration: 1.00 x 1.064 x 433 x Height x 0.500 / 6] x 44 = 1 690 chedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7,030 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page: 66 of 102 ROOM HEATING PEAK LOADS Project Title Date balle Estado, LLC 6/13/2007 Room Information Desi n Conditions Room Name Suite 106 Time of Peak Jan 12 am Floor Area 578 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70 OF Conduction Area X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X U -Value X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X R-19 Wall .19.2x6.16 114.0 0.0740 Double Non Metal Tinted 24.0 0.5800 Double Non Metal Tinted 48.0 0.5800 Double Non Metal Tinted 24.0 0.5800 30.0 0.0740 R-19 Wal .19 2 6 16 290.0 0.0740 perimeter = 53.0 0.7300 Btu/hr 371 612 1,225 612 98 944 1,702 Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 5 565 Infiltration: r 1.00l X 1.064 X 578 X 10.00 X 0.500 16] X 44 = 2 255 schedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7,821 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page: 67 of 102 ROOM HEATING PEAK LOADS Project Title Date 1►alla Fctarin I I C; R/1 */7nn7 Room Information Desicin Conditions Room Name Suite 107 Time of Peak Jan 12 am Floor Area 405 Outdoor Dry Bulb Temperature 26OF Indoor Dry Bulb Temperature 70 OF R-19 Wall .19.2x6.16 Conduction Area X X X x X X x x X x x X X X X X X X x x X X x X x X X X X x X X x X X X X x XF U -Value X X X x X X X x x x x X X x X X x x X x X X X x X X x X X x X X X x X x X x x R-19 Wall .19.2x6.16 94.0 0.0740 Double Non Metal Tinted 24.0 0.5800 nnubip Non Metal Tinted 48.0 0.5800 Double Non Metal Tinted 24.0 0.5800 R-1AWaII (W.192616) 210.0 0.0740 - 9 Wall .19 2x6.16 190.0 0.0740 perimeter = 59.0 0.7300 AT OF Btu/hr Items shown with an asterisk (•rr) denote conduction through an interior surface to another room. Page Total: 5 953 Infiltration: I1.00 x 1.064 x 405 x 10.00 x 0.500 / 60] x 0 = 1 580 cheduie Air Sensible Area Ceiling Height ACH QT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7,534 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page: 68 of 102 ROOM HEATING PEAK LOADS act Title Ila Fctarin I I Date F/1,/gM7 Room Information Desicin Conditions Room Name Suite 201 Time of Peak Jan 12 am Floor Area 619 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70 OF X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X AT of Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 7,8761 Infiltration: r 1.001 X 1.064 X 619 X 10.00 X 0.500 / 6] X 44 = 2415 `schedule Alr Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 10 292 EnergyPro 4.3 by Energysoft User Number. 6712 Job Number: Page: 69 of 102 Conduction Area X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X U -Value X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X R-30 Roof R.30.2x12.16 619.0 0.0360 R-19 Wall .19.2x6.16 139.0 0.0740 Double Non Metal Tinted 24.0 0.5800 Double Non Metal Tinted 48.0 0.5800 24.0 0.5800 R-19 Wa I .19.2x6.16 64.0 0.0740 Double Non Metal Tented 36.0 0.5800 R-19 Wall W.19.2x6.16 124.0 0.0740 36 5800 R-19 Wall 19.2x6.16 286.0 0.0740 nntjhlp Non Metal Twntpd 24.0 0.5800 AT of Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 7,8761 Infiltration: r 1.001 X 1.064 X 619 X 10.00 X 0.500 / 6] X 44 = 2415 `schedule Alr Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 10 292 EnergyPro 4.3 by Energysoft User Number. 6712 Job Number: Page: 69 of 102 ROOM HEATING PEAK LOADS Project Title Date `%ally Fctnrin I I (' R/13/�nn7 Room Information Desi n Conditions Room Name Suite 202 Time of Peak Jan 12 am Floor Area 728 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70°F Conduction Area 728.0 64.0 24.0 48.0 24.0 200.0 151.0 30.0 24.0 280.0 U -Value Btu/hr Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 6 788 Infiltration: r 1.00 X Sensible X 728 X 10.00 X 0.500 / 6] X 44 = 2841 schedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7 9,629 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page: 70 of102 ROOM HEATING PEAK LOADS 3ject Title ally Fctarin I 1 C Date A/1 ,/9nm Room Information Desicin Conditions Room Name Suite 203 Time of Peak Jan 12 am Floor Area 781 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70°F 24.0 Conduction Non Area U -Value 781.0 X X X X X X X x X X X x X X X X X X X X X X X X X X X X X X X X X X X X X X X 0.0360 X X X X X X X X X X X X x x X X X X X X X X X x X X X X X X X X X X X X X X X 134.0 0.0740 24.0 0.5800 48.0 0.5800 24.0 0.5800 176.0 0.0740 24.0 0.5800 30.0 0.5800 366.0 0-0740 24.0 1.4500 266.0 0.0370 OT of Btu/hr 1.237 436 612 1,225 612 573 612 766 1,192 1.531 Items shown with an asterisk ('r) denote conduction through an interior surface to another room. Page Total: 9 230 Infiltration: I 1.001 x 1A64 x 781 x 10.00 x 0.500 / 6] x 44 = 3 048 chedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 7 12,278 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number. Page: 71 of 102 ROOM HEATING PEAK LOADS ct Title le Es on Room Name Floor Area Indoor Dry Bulb Temperature Conduction uesl n t;onaitions Suite 204 Time of Peak Jan 12 am 860 Outdoor Dry Bulb Temperature 26OF 70 of AT of R-30 Roof R.30.2x12.16 860.0 X X X x X X X x X X X X x x x X X x X x x X X x x X x X X x x X X X X x X x X x Height 0.0360 X X X X X X X x X X X X X X X X X X X X X X X X X X X X X X X x X X x X X X X x 44 = 44 = 44 = 44 = 44 = 44 = 44 = 44 = 44 = 44 = 44= = = Page Total: 44 = pT 1,362 R-19 Wall W.19.2x6.16 134.0 0.0740 436 Double blon Metal Tinted 24.0 0.5800 612 Double Non Metal Tinted 48.0 0.5800 1,225 nnuhlp. Nnn Metal Tinted 24.0 0.5800 612 - 9 W I I (W.19.24.16) 366.0 0.0740 1,192 Solid Wood Dox 24.0 1.4500 1.53 R-19 Wall .19.2x6.16 246.0 0.0740 801 nniffilp Non Metal Tinted 30 0,5800 766 Double Non Metal Tinted 24.0 0.5800 612 R-1 A Floor Assemhly 266.0 0.0370 Items shown with an asterisk (•r) denote conduction through an interior Infiltration: 1.00 x 1.064 x chedule Air Sensible Fraction surface to another room. 860 x 10.00 Area Ceiling 0.500 / 60] ACH 9 583 3 356 TOTAL HOURLY HEAT LOSS FOR ROOM 12,939 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number. Page: 72 of 102 ROOM HEATING PEAK LOADS Title Room Information Desi - n Conditions Room Name Suite 205 Time of Peak Jan 12 am Floor Area 1,733 Outdoor Dry Bulb Temperature 26°F Indoor Dry Bulb Temperature 70 OF Conduction AT OF Btu/hr EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 73 of 102 R-30 Roof R.30.2x12.16 1733.0 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Height 0.0360 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 44 = = = = = = = = = = = = = = = = 2,745 R-19 Wall .19.2x6.16 188.0 0.0740 44 612 Double Non Metal Tinted 24.0 0.5800 44 612 Double Non Metal Tinted 48.0 0.5800 44 1,225 ndiffilp Non MPIM Tinted 24.0 0.5800 44 612 Double on Me Tinted 24.0 0.5800 44 612 Double 48.0 0.5800 44 1,225 Double Non Metal Tinted 24.0 0.5800 44 612 0 0 44= 309 Double o etal Tinte4 30.0 0.5800 44 766 - 307.0 0.0740 44= Double Non Metal Tinted 48.0 0.5800 44 1,225 Doub a Non Metal Tinted 25.0 0.5800 44 638 R-19 Wall 9.2x6.6 510.0 0.0740 44= 1.661 R-1 A Flonr Assembly 263.0X 0.0370 44= Hems shown with an asterisk (') denote conduction through an interior Infiltration: r 1.001X 1.064 X `Schedule Air Sensible Fraction surface to another room. 1 733 X 10.00 Area Ceiling 0.500 /6] ACH Page Total: 44 AT 14 283 6762 TOTAL HOURLY HEAT LOSS FOR ROOM 21,046 EnergyPro 4.3 by EnergySoft User Number: 6712 Job Number: Page: 73 of 102 LR OOM HEATING PEAK LOADS Project Title Date ¢aIle Estado, LLC 6/13/2007 Room Information Desi n Conditions Room Name Suite 206 Time of Peak Jan 12 am Floor Area 690 Outdoor Dry Bulb Temperature 26OF. Indoor Dry Bulb Temperature 70 OF Conduction Area U -Value 690.0 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X 0.0360 X X X X X X X X X X X X X X x X X X X X X X X X X X X X X X X X X X X X X X X 320.0 0.0740 175.0 0.0740 17.5 0.5800 17.5 0.5800 232.5 0.0740 17.5 0.5800 17.5 0.5800 175 0 17.5 0.5800 17.5 0.5800 130.0 0.0740 16.0 0,5800 8.0 0.5800 6 0.5800 690.0 0.0370 AT of Btu/hr 1.0931 1,042 570 447 447 757 447 447 447 447 423 408 1,225 1,123 Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total: 10 176 Infiltration: r 1.00 x 1.064 x sso x 10.00 x 0.500 I6] x ® = 2992 schedule Air Sensible Area Ceiling Height ACH pT Fraction TOTAL HOURLY HEAT LOSS FOR ROOM 12,869 EnergyPro 4.3 by EnergySoft User Number. 6712 Job Number: Page: 74 of 102 ROOM COOLING PEAK LOADS Title Date Calle Estado, LLC I 6/13/2007 Room Name Suite 101 Time of Peak Jul 3 pm Floor Area 820 Outdoor Dry Bulb Temperature 112 9F Indoor Dry Bulb Temperature 74`k Outdoor Wet Bulb Temperature 78 cl� Conduction -19 Wall .19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted -19 Wall .19.2x6.16 19 Wall .19.2x6.16 -19 Wall .19.2x6.16 -19 Wall .19.2x6.16 41 X 0.590 X Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.07401 Orientation Area SGF SC DETD 1 X X X X X X X X X 37.8 = = = = = = = = = 27.9 27.9 39.2 40.1 40.2 58.2 48.0 (N) 24.0 X 41 X 0.590 X (N) 48.0 X 41 X 0.590 X (N) 24.0 X 41 X 0.590 x (N) 36.0 X 41 X 0.590 x (NE) 36.0 X 41 x 0.590 x (E) 36.0 X 4 X 0.590 X (S) 20.0 X 42 X 0.590 X (S) 24.0 X 42 X 0.590 X X X X X X X Page Total Weighting Factor 0.811 = 0.811 = 0.811 = 0.807 = 1.217 = 1.532 = 0.793 = 0.793 = Page Total Btu/hr 498 2,266 1,748 185 487 1,030 65 6 277 Btu/hr 471 942 471 703 1.060 1,334 393 471 5 845 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c x 820 x 0.794 Watts/sqft x 3.41 Btuh/Waft x 0.999 = 2,219 ccu ants 1.0c x 820 X 300 Btuh/occ. / 10 Sgft/occ. x 1.00 = 2,460 Receptacle 1.0c x 820 X 1.000 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 2,799 rocess 1.0c x 820 x 0.000 Watts/sqft x 3.41 Btuh[Watt x 1.00 = 0 Infiltration: 1.00 x 1.064 x 820 x 1 10.00 x 0.50 /601 x 38 = 2 763 chedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 22,363 Sched. Latent Gain Frac. Area Heat Gain Btu/hr occupants 1.00 x 820 x 300 Btuh/occ. / 100 sgft/occ. = 2 460 Receptacle 1.00 x x 0 non Watts/sqft x Btuh/Watt = Process 1.00 x 820 X 0.000 Watts/sgft x 1 3.413 Btuh/Watt = o Infiltration: n0J x x szo x x � l6] x chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING PEAK LOADS Title Date Calle Estado, LLC I 6/13/2007 Room Name Suite 102 Floor Area 433 Indoor Dry Bulb Temperature 74c� Time of Peak Jul 3 pm Outdoor Dry Bulb Temperature 112 9F Outdoor Wet Bulb Temperature 78 c� Conduction Area X X X X X X X X X U -Value X X X X X X X X X DETD 1 = = = = = = = = = Btu/hr -19 Wall .19.2x6.16 69.0 0.0740 37.8 193 Double Non Metal Tinted 120.0 0.5800 27.9 1,942 -19 Wall .19.2x6.16 116.0 0.0740 40.2 345 Double Non Metal Tinted 25.0 0.5800 27.9 405 25.0 .42 0.590 0.793 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Page Total 2,885 Solar Gain Window Window Window Window llindow Orientation Area X X X X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = (N) 24.0 4 0.590 0.811 (N) 48.0 4 0.590 0.811 (N) 24.0 4 0.590 0.811 (S) 24.0 42 0.590 0.793 (S) 25.0 .42 0.590 0.793 Page Total Btu/hr 471 942 471 472 -491 2,8471 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 433 X 1.289 Watts/sgft X 3.41 Btuh[Watt X 0.999 = 1,902 ccu ants 1.0c X 433 X 300 Btuh/OCC. / 10 sgft/OCc. X 1.00 = 1,29 Receptacle 1.0 x 433 X 1.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 2,217 rocess 1.0c X 433 X 0.000 Watts/sgft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration: 1.00 X 1.064 X 433 X 10.00 X 0.50 /601 X 38 = 1 459 chedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 12,608 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 433 X 3001 Btuh/OCc./ 100 sqft/occ. = 1 299 Receptacle 1 on x x Watts/sgft x Btuh/Watt = Process 1.00 X 433 X 0.000 Watts/sgft x 1 3.413 Btuh/Watt = 0 Infiltration:L 100 xx x 1000 x �0 /6] x chedule Air Latent Area Ceiling Height ACH pW ROOM COOLING PEAK LOADS project Title ROOM INFO'. Room Name Calle Estado, LLC Floor Area Indoor Dry Bulb Temperature Conduction -19 Wall .19.2x6.16 ouble Non Metal Tinted -19 Wall .19.24.16 ouble Non Metal Tinted -19 Wall .19.2x6.16 Solid Wood Door Suite 103 1 Time of Peak 484 Outdoor Dry Bulb Temperature 749k Outdoor Wet Bulb Temperature Area 1 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain indow Window Window Window indow U -Value 0.0740 0.5800 Date 6/13/2007 DETD 1 38.4 = 28.3 = 39.0 = 28.3 = 61.5 = 58.3 = Page Total Orientation Area X X X X X X X X X x SGF X X X X x X X X X X SC Weighting X X x X X X X X X X Factor = = = = = (N) 24.0 35 0.590 1.011 (N) 48.0 35 0.590 1.011 (N) 24.0 35 0.590 1.011 (S) 24.0 33 0.590 1.071 S 25.0 33 0.590 1.071 Page Total Jul 4 pm 111 9F 78 OF Btu/hr 381 1,966 522 410 1,097 2,028 6 404 Btu/hr 501 1,002 501 500 521 3 025 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c x 484 x 1.285 Watts/sgft x 3.41 Btuh/Waft x 1.000 = 2,123 ccu ants 1.0c X 484 X 300 Btuh/occ. / 10 sgft/occ. X 1.00 = 1,452 Receptacle 1.0 x 484 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 826 rocess 1.0 X 484 X 1.500 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 2,478 Infiltration: 1.00 X 1.064 X 484 X 10.00 x 0.50 /601 X 38 = 1 631 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 17,938 Sched. Latent Gain Frac. Area Heat Gain Btu/hr Occupants 1.00 X 484 x 30ol Btuh/oCC. / 100 sgft/occ. = 1452 Receptacle 1.0o x x Watts/sgft x BtuhlWatt = Process E1.00 x 484 X 0.000 Watts/sgft x 1 3.413 Btuh/Watt = 0 Infiltration: x x � x x � / 6] x ! _ chedule Air Latent Area Ceiling Height ACH pgll ROOM COOLING PEAK LOADS ..Project Title Date j Calle Estado, LLC 6/13/2007 r ROOM INFORMATION DESIGN CONDITIONS Room Name suite 104 Time of Peak Jul 3 pm Floor Area 484 Outdoor Dry Bulb Temperature 112 97 Indoor Dry Bulb Temperature 78OFOutdoor Wet Bulb Temperature 78 OF Conduction k -19 Wall M.19.2x6.16) Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. U -Value 1 0.07401 DETD 1 Btulhr X 34.4 = 341 X 24.5 = 1,704 X 36.8 = 722 X 37.1 = 497 X 24.5 = 355 Page Total 1 3.619 Solar Gain Orientation Area X X X x x X X X X X SGF X X X X x X X X X X SC Weighting X X x X x x X X X X Factor = = = = = = Btu/hr Window (N) 24.0 4 0.590 0.876 509 i dow (N) 48.0 4 0.590 0.876 1,018 Window (N) 24.0 4 0.590 0.876 509 Window (S) 25.0 42 0.590 0.868 538 indow (S) 24.0 42 0.590 0.868 516 ' Page Total 3 obs Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c X 484 X 1.285 Watts/sgft X 3.41 Btuh/Watt X 1.000 = 2,123 ccu ants 1.0c X 484 X 300 Btuh/OCC. / 10 sgft/OCc. X 1.00 = 1,452 Receptacle 1.0c X 484 X 0.500 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 826 rocess 1.0c X 484 X 0.000 Watts/sqft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration:1.00 x 1.064 x 484 x 10.00 x 0.50 /601 x 34 = 1 459 Ledule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 12,567 Sched. Btulhr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 484 x 3001 Btuh/OCC. / 100 sgft/occ. = 1452 Receptacle 10 x x 0 nn Watts/sgft x 1 3.413 Btuh/Watt = Process 1.00 x 484 x 0.000 Watts/sgft x 3.413 Btuh/Watt = o Infiltration: _1.00 x[ x x 1n on x H / 6] x l = C� chedule Air Latent Area Ceiling Height ACpW ROOM COOLING PEAK LOADS ,_ Project Title Date `� Calle Estado, LLC I 6/13/2007 7 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 105 Time of Peak Jul 3 pm Floor Area 433 Outdoor Dry Bulb Temperature 112 9F Indoor Dry Bulb Temperature 7a`k Outdoor Wet Bulb Temperature 78 9F Conduction h-19 Wall (W.19.2x6.16) ouble Non Metal Tinted Area 117 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (•) denote conduction through an interior surface to another room. U -Value 1 0.07401 X X X X X X X X X DETD 1 = = = = = = = = = 34.4 24.5 37.1 SC Weighting X X X X X X X X X X Factor = = = = = Window (N) Page Total Solar Gain Orientation Area X X X X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = Window (N) 24.0 41 0.590 0.876 Window (N) 48.0 41 0.590 0.876 Window (N) 24.0 41 0.590 0.876 Window (S) 24.0 42 0.590 0.868 indow (S) 24.0 42 0.590 0.868 Page Total Btu/hr 176 2,045 321 2 541 Btu/hr 509 1,018 509 516 516 3 067 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c x 433 X 1.289 Watts/sqft x 3.41 Btuh/Watt X 1.000 = 1,904 ccu ants 1.0c X 433 X 300 Btuh/occ. / 10 sqft/occ. X 1.00 = 1,299 Receptacle 1.0c X 433 X 0.500 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 739 rocess 1.0 x 433 X 0.000 Watts/sqft x 3.41 Btuh/Watt x f�1.00I = 0 Infiltration: 1.00 x 1.064 x 433 x 1 10.00 x 0.50 /601 x I 341 = 1 306 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 10,857 Sched. Btu/hr Latent Gain Frac. Area Heat Gain ccu ants 1.00 X 433 X 300 Btuh/OCC. / 100 sgft/occ. = 1299 Receptacle 1.nn x x Watts/sgft x Btuh/Watt = rocess 1.00 X 433 X 0.000 Watts/sgft x��3.413 Btuh/Watt = 0 Infiltration:L x�� XE x� x I p,50f l60] x _ chedule Air Latent Area Ceiling Height ACH pgy ROOM COOLING PEAK LOADS Title Date 1 Calle Estado, LLC 1 6/13/2007 1 ROOM INFORMATION Room Name Floor Area Indoor Dry Bulb Temperature Conduction 19 Wall W.19.2x6.16 Double Non Metal Tinted -19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Suite 106 578 78OF Time of Peak Outdoor Dry Bulb Temperature Outdoor Wet Bulb Temperature Area X X X X X X X X X U -Value X X X X X X X X X 114.0 0.0740 96.0 0.5800 30.0 0.0740 290.0 0.0740 (N) 48.0 57 0.590 0.733 (N) 24.0 57 0.590 0.733 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (•) denote conduction through an interior surface to another room. Solar Gain Window Window Window '1 DETD 33.6 = 30.4 52.0 Page Total Orientation Area X X X X X X x X x X SGF X X X x X X X X X X SC Weighting X X x X X X x X x X Factor = = = = = = = (N) 24.0 57 0.590 0.733 (N) 48.0 57 0.590 0.733 (N) 24.0 57 0.590 0.733 Page Total Jun 5 pm 106 9F 74 OF Btu/hr 283 1,188 68 1,115 2 655 Btu/hr 591 1,183 591 2,366 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0 x 578 x 1.287 Watts/sgft X 3.4V Btuh/Watt x 1.000 = 2,539 ccu ants 1.0c X 578 X 300 Btuh/OCC. / 10 sgft/occ. X 1.00 = 1,734 Receptacle 1.0 X 578 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 986 rocess r1.0 X 578 X 0.000 Watts/sqft X 3.41 BtuhNVatt X 1.00 = 0 Infiltration: I 1.00 x 1.064 x 578 x 10.00 x 1 0.50 /601 x 34 = 1 743 "`--- chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 12,022 Sched. Btulhr Latent Gain Frac. Area Heat Gain ccu ants 1.00 X 578 X 300 Btuh/occ. / 100 sqft/occ. = 1 734 Receptacle 1.00 x x 0000 Wafts/sgft x1 3.41il Btuh/Waft = rocess 1.00 x 578 X 0.000 Wafts/sgft X 3.413 Btuh[Watt = 0 Infiltration: 1.00 xx 57A x E=o nn x n.5o / 60] x _ chedule Air Latent Area Ceiling Height . ACH pW ROOM COOLING PEAK LOADS .�roject Title Date Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 107 Time of Peak Jul 3 pm Floor Area 405 Outdoor Dry Bulb Temperature 112 tF Indoor Dry Bulb Temperature 78`1= Outdoor Wet Bulb Temperature 78 `k Conduction -19 Wall (W.19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted Double Non Metal Tinted 19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Area X X X X X X X X X U -Value 94.0 0.0740 24.0 0.5800 48.0 0.5800 24.0 0.5800 210.0 0.0740 190.0 0.0740 48.0 41 0.590 1.116 (E) 24.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (•) denote conduction through an interior surface to another room. Solar Gain Window Window Window DETD 1 X X X X X X X X X 36.8 = = = = = = = = = 24.5 24.5 24.5 37.1 55.1 = = = = = = 1E) 24.0 Page Total Orientation Area X X X X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = 1E) 24.0 41 0.590 1.116 (E) 48.0 41 0.590 1.116 (E) 24.0 41 0.590 1.116 Page Total Btu/hr 256 341 682 341 576 775 2 971 Btu/hr 648 1,296 648 2 593 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 405 X 1.378 Watts/sqft X 3.41 BtuhfWatt X 1.000 = 1,904 ccu ants 1.0 X 405 X 300 Btuh/OCC. / 10 sgft/occ. X 1.00 = 1,215 Receptacle 1.0 X 405 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 691 rocess r1.0x 405 x 0.000 Watts/sgft X 3.41 BtuhlWatt x 1.00 = 0 Infiltration: I 1.00 x 1.064 x 405 x 1 10.00 x 0.50 /601 x = 1 221 chedule Air Sensible Area Ceiling Height ACH OT • Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 10,595 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 405 X 300 Btuh/occ. / lool sgft/occ. = 1215 Receptacle 1 o x x Watts/sgft x 1 3 4131 BtuhlWatt = rocess 1.00 X 405 X 0.000 Wafts/sgft x 1 3.413 Btuh[Watt = o Infiltration: xx L ----m2 x x a50 / 60] x ®= 473 chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING PEAK LOADS Project Title ROOM INFOI Room Name Calle Estado, LLC Floor Area Indoor Dry Bulb Temperature Conduction -30 Roof R.30.2x12.16 19 Wall .19.24.16 ouble Non Metal Tinted -19 Wall .19.2x6.16 Double Non Metal Tinted -19 Wall .19.24.16 Double Non Metal Tinted -19 Wall .19.2x6.16 Suite 201 1 Time of Peak 619 1 Outdoor Dry Bulb Temperature 780F Outdoor Wet Bulb Temperature Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value Date 6/13/2007 DETD 1 74.2 = 32.9 = 23.2 = 34.5 = 23.2 = 35.7 = 23.2 = 38.9 = Page Total Orientation Area x x X X X X X X X X SGF X x X X X X X x X X SC Weighting X x X X x X x X X X Factor = = = = = = = = (N) 24.0 46 0.590 0.773 (N) 48.0 46 0.590 0.773 (N) 24.0 46 0.590 0.773 (NE) 36.0 46 0.590 1.182 (E) 36.0 46 0.590 1.510 (S) 24.0 49 0.590 0.739 I I= Page Total Jul 2 pm 111 OF 78 OF Btulhr 1,654 338 1,612 163 483 327 483 823 5-8861 Btu/hr 504 1,008 504 1,155 1,476 512 ;,15 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btulhr fights 1.0c X 619 x 1.052 Watts/sqft x 3.41 Btuh/Watt X 1.000 = 2,222 ccu ants 1.0 X 619 X 300 Btuh/OCC. / 10 sgft/acc. x 1.00 = 1,857 Receptacle 1.0 x 619 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 1,056 rocess 1.0 x 619 X 0.000 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 0 Infiltration:Cedule 1.00 x 1.osa x 619 x 10.00 x 0.50 / 6] x 34 = 1 866 Air Sensible Area Ceiling Height ACH &T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 18,046 Sched. Latent Gain Frac. Area Heat Gain Btulhr Dccu ants 1.00 X 619 X 3001 Btuh/OCC. / 100 sgft/occ. = 1 857 Receptacle 1.00 x x Watts/sgft x BtuhlWatt = rocess 1.00 X 619 x 0.000 Watts/sqft X 3.413 Btuh/Watt = 0 Infiltration:1 x x x �� x�/ 60] x Ledule Air Latent Area Ceiling Height ACH Z�,W ROOM COOLING PEAK LOADS Project Title Date 'a Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 202 Time of Peak Jul 3 pm Floor Area 728 Outdoor Dry Bulb Temperature 112 `F Indoor Dry Bulb Temperature 78OF Outdoor Wet Bulb Temperature 78 `k Conduction -30 Roof R.30.2x12.16 19 Wall .19.2x6.16 ouble Non Metal Tinted -19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Double Non Metal Tinted -19 Floor Assembly Area 1 280.01 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Window Window Window Window do� U -Value DETD X X X X X X X X X 70.3 = = = = = = = = = 34.4 24.5 36.8 37.1 24.5 28.6 (N) 24.0 Page Total Orientation Area X X X X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = (N) 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N)_ 24.0 41 0.590 0.876 (S) 30.0 42 0.590 0.868 U 24.0 42 0.590 0.868 Page Total Btulhr 1,842 163 1,704 545 414 426 297 5 391 Btulhr 509 1,018 509 645 516 3 196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c X 728 X 1.022 Watts/sqft X 3.41 Btuh/Watt X 1.000 = 2,539 ccu ants 1.0 X 728 x 300 Btuh/occ. / 101 sgftlocc. x 1.00 = 2,184 Receptacle 1.0 x 728 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 1,242 rocess 1.0c X 728 X 0.000 Watts/sgft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration: 1.00 X 1.064 X 728 X 10.00 X 0.50 160] X 34 = 2195 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 16,748 Sched. Btulhr Latent Gain Frac. Area Heat Gain Dccu ants 1.00 X 728 X 3001 Btuhiocc. / 100 sgft/occ. = 2184 ece tacle 1.00 x x ri onrij Watts/sgft x L 3.4131 Btuh/Watt = rocess 1.00 X 728 X 0.000 Watts/sgft x 3.413 Btuh/Watt = o Infiltration: xx 72s /6 x x � ] x cheduie Air Latent Area Ceiling Height ACH pN/ ROOM COOLING PEAK LOADS Project Title Date Calle Estado, LLC 6/13/2007 Room Name Suite 203 Time of Peak Jul 3 pm Floor Area 781 Outdoor Dry Bulb Temperature 112 OF Indoor Dry Bulb Temperature 78`k Outdoor Wet Bulb Temperature 78 �: Conduction 30 Roof R.30.2x12.16 19 Wall .19.2x6.16 Double Non Metal Tinted 19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Solid Wood Door -19 Floor Assembly Area 781.0 134.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (•) denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.03601 1 0.03701 Orientation Area X X x X x X x x x x SGF x X X x X x x x x x SC (N) 24.0 41 0.590 (N) 48.0 41 0.590 (N) 24.0 41 0.590 (S) 24.0 42 0.590 (S) 30.0 42 0.590 DETD 1 70.3 = 34.4 = 24.5 = 37.1 = 55.1 = 52.9 Page Total Weighting Factor x 0.876 = X 0.876 = X 0.876 = x 0.868 = x 0.868 = x = X x = x = x = Page Total Btu/hr 1,976 341 2,130 483 1.493 1 842 282 8 548 Btu/hr 509 1,018 509 516 645 3 196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btulhr fights 1.0c X 781 x 1.273 Watts/sgft X 3.41 Btuh/Watt x 1.000 = 3,392 ccu ants 1.0 X 781 X 300 Btuh/occ. / 10 sgft/OCc. x 1.00 = 2,343 Receptacle 1.0 x 781 X 0.500 Wafts/sqft X 3.41 Btuh/Watt x 1.00 = 1,333 rocess 1.0 x 781 x 0.000 Watts/sqft x 3.41 Btuh/Watt x X1.0000 = 0 Infiltration: 1.00 x 1.064 x 781 x 10.00 x 0.50 / 6U] X I _341 = 2,355 Schedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 21,167 Sched. Btu/hr Latent Gain Frac. Area Heat Gain ccu ants 1.00 x 781 x 3001 Btuh/occ. / 100 sgft/occ. = 2 343 Receptacle 1-00 x x nnn Wattslsgft x i 4n Btuh/Watt = rocess 1.00 x 781 x 0.000 Watts/sgft x 3.413 Btuh/Watt = 0 Infiltration: 1 Do x x 781 x 10 Do x / 60] x n 00262_ _ chedule Air Latent Area Ceiling Height ACH zSW I EnemvPro By EnemySoft User Number: User Page:84 of 102 1 ROOM COOLING PEAK LOADS project Title Date Calle Estado, LLC 6/13/2007 Room Name suite 204 Time of Peak Jul 3 pm Floor Area 860 Outdoor Dry Bulb Temperature 112 `F Indoor Dry Bulb Temperature 78`F Outdoor Wet Bulb Temperature 78 c� Conduction -30 Roof R.30.2x12.16 19 Wall .19.2x6.16 Double Non Metal Tinted -19 Wall .19.2x6.16 Solid Wood Door -19 Wall .19.2x6.16 -19 Floor Assembly Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 0.0360 0.0740 DETD 1 70.3 = 34.4 = 24.5 = 36.8 = 30.8 = 37.1 = 28.6 = Page Total Orientation Area X X X X X. X X X X X SGF X X X X x X x X X X SC Weighting X X X X X X X X X X Factor = = = = = (N) 24.0 4 0.590 0.876 (N) 48.0 4 0.590 0.876 (N) 24.0 4 0.590 0.876 (S) 30.0 42 0.590 0.868 (S) 24.0 42 0.590 0.868 Page Total Btulhr 2,176 341 2,130 997 1,071 675 282 7 s72 Btu/hr 509 1,018 509 645 516 3 196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 860 X 1.264 Watts/sgft X 3.41z Btuh/Watt X 1.000 = 3,709 ccu ants 1.0c x 860 X 300 Btuh/occ. / 10C sgft/occ. x 1.00 = 2,580 Receptacle 1.0 x 860 X 0.500 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 1,468 rocess 1.0 x 860 x 0.000 Watts/sgft x 3.41 Btuh/Watt x 1.00 = 0 Infiltration:1.00 X 1.064 X 860 x 10.00 X 0.50 /601 X 34 = 2,593 Ledule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 21,219 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 860 X 3001 Btuh/OCc. / 100 sgft/occ. = 2 580 Receptacle 1.00 x x parinj Wattslsqft x BtuhlWatt - Process 1.00 x 860 x o.000l Watts/sgft x 1 3.4131 Btuhfwatt = 0 Infiltration: xC x 860 x��0� x n sn / 60] x n oo2s2_ = chedule Air Latent Area Ceiling Height ACH pyy c o TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 3.477 Ener yPro By Ener ySoft User Number: User Page: 85 of 102 ROOM COOLING PEAK LOADS Title Date Calle Estado, LLC 1 6/13/2007 Room Name Suite 205 Time of Peak Jul 3 pm Floor Area 1,733 Outdoor Dry Bulb Temperature 112 'F Indoor Dry Bulb Temperature 789k Outdoor Wet Bulb Temperature 78 `F Conduction -30 Roof R.30.2x12.16 -19 Wall .19.24.16 Double Non Metal Tinted -19 Wall W.19.2x6.16 Double Non Metal Tinted -19 Wall W.19.2x6.16 Double Non Metal Tinted -19 Wall .19.24.16 -19 Floor Assembly Area 1,733.0 188.0 240.0 95.0 30.0 307.0 25.0 510.0 263.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 0.0360 0.0740 0.5800 0.0740 0.5800 0.0740 0.5800 0.0740 0.0370 DETD 1 X X X X X X X X X 70.3 = = = = = = = = = 34.4 24.5 36.8 24.5 37.1 24.5 55.1 28.6 Page Total Orientation Area X X X X X X X X X x SGF X X X X X X X X X x SC Weighting X X X X x x X X X x Factor = = = = = = = = = (N) 24.0 4 0.590 0.876 (N) 48.0 4 0.590 0.876 (N) 24.0 4 0.590 0.876 (N) 24.0 4 0.590 0.876 (N) 48.0 4 0.590 0.876 (N) 24.0 4 0.590 0.876 (E) 30.0 4 0.590 1.270 (S) 48.0 42 0.590 0.868 (S) 25.0 42 0.590 0.868 Page Total Btu/hr 4,385 479 3,408 259 426 843 355 2,080 279 12 513 Btu/hr 509 1,018 509 509 1,018 509 922 1,032 538 6 562 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 1,733 X 0.939 Watts/sqft X 3.41 Btuh/Watt X 1.000 = 5,556 ccu ants 1.0c X 1,733 X 300 Btuh/OCC. / -10C sgftlocc. X 1.00 = 5,199 Receptacle 1.0 x 1,733 X 0.500 Watts/sqft X 3.41 Btuh/Watt X 1.00 = 2,957 rocess r1.0 X 1,733 X 0.000 Watts/sqft X 3.41 Btuh[Waft X 1.00 = 0 Infiltration: I 1.00 x 1.064 x 1 733 x 10.00 x 0.50 / 60] x 34 = 5,2251 chedule Air Sensible Area Ceiling Height ACH &T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 38,013 Sched. Btu/hr Latent Gain Frac. Area Heat Gain ccu ants 1.00 X 1 733 X 3001 Btuh/occ. / F 100 sgft/occ. = 5199 Receptacle 1.00 x 1 1.7331 x 0 pool Watts/sgft x Btuh/Watt = rocess 1.00 X 1,733 x 0.000 Watts/sgft x 3.413 Btuh/Watt = 0 Infiltration: xx x1c onj x 60] x n� chedule Air Latent Area Ceiling Height ACH Zsw JR00M COOLING PEAK LOADS [!!,roject Title Date , Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 206 Time of Peak Sep 3 pm Floor Area 690 Outdoor Dry Bulb Temperature 107 `k Indoor Dry Bulb Temperature 789k Outdoor Wet Bulb Temperature 74 `k Conduction -30 Roof R.30.2x12.16 -19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted -19 Wall .19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted Double Non Metal Tinted Area 690.0 320.0 175.0 17.5 17.5 232.5 17.5 17.5 17.5 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 0.0360 0.0740 0.0740 0.5800 0.5800 0.0740 0.5800 0.5800 0.5800 X X X X X X X X X DETD 1 = = = = = = = = = 51.6 27.5 29.8 20.4 20.4 41.6 20.4 20.4 20.4 Page Total Orientation Area X X X X X X X X X x SGF 27 X 27 X 112 X 112 X 112 X 112 X 112 X 76 X 76 X 1 76 x SC Weighting X X X x X X X X X X Factor = = = = = = = = = (E) 17.5 0.590 2.331 _(E) 17.5 0.590 2.331 (S) 17.5 0.590 1.055 (S) 17.5 0.590 1.055 (S) 17.5 0.590 1.055 ( ) 17.5 0.590 1.055 (S) 17.5 0.590 1.055 (W) 16.0 0.590 0.495 (W) 48.0 0.590 0.495 16.0 1 0.590 0.495 Page Total Btu/hr 1,283 652 385 207 207 716 207 207 207 4 072 Btu/hr 650 650 1,220 1,220 1.22 1,220 1,220 354 1,062 354 9 171 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0 X 690 X 1.078 Watts/sqft X 3.41 BtuhfWatt X 1.000 = 2,539 ccu ants 1.0c x 690 X 300 Btuh/occ. / 10 sqft/occ. X 1.00 = 2,07 Receptacle 1.0c x 690 X 0.500 Watts/sgft x 3.41 BtuhfWatt X 1.00 = 1,177 rocess 1.0 X 690 X 0.000 Watts/sgft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration: 1.00 x 1.064 x 690 x 10.00 x 0.50 /601 x 34 = 2,081 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 23,555 Sched. Btulhr Latent Gain Frac. Area Heat Gain ccu ants 1.00 x 690 X 3001 Btuh/OCC. / 100 sgft/occ. = 2 070 Receptacle 100 x x 0 00 Watts/sgft x Btuh/Watt = rocess 1.00 x 690 X 0.000 Watts/sgft xi 3.4131 Btuh/Watt = 0 Infiltration: xx x x ICJ / 6] x ®_ chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING PEAK LOADS Project Title Date 1 Calle Estado, LLC 1 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 206 Time of Peak Sep 3 pm Floor Area 690 Outdoor Dry Bulb Temperature 107 OF Indoor Dry Bulb Temperature 78`k Outdoor Wet Bulb Temperature 74 9F Conduction Area 17.5 X 17.5 X 130.0 X 16.0 X 413.0 X 16.0 X 690.0 X X X 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (`) denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.58001 X X X X X X X X X DETD 1 = = = = = = = = = 20.4 20.4 50.0 20.4 20.4 20.4 23.6 Page Total Weighting Orientation Area SGF SC Factor x x x = x x x = x x x = X x x = x x x = x x x x x x = x x x xx x = x x x = Page Total Btu/hr 207 207 481 189 568 189 603 2 446 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c x 690 x 1.078 Watts/sqft x 3.41 Btuh/Watt x 1.000 = 2,539 ccu ants 1.0c X 690 X 300 Btuh/OCC. / 10 sgft/occ. X 1.00 = 2,07 Receptacle 1.0 x 690 x 0.500 Watts/sqft X 3.41 Btuh/Watt x 1.00 = 1,177 rocess 1.0 x 690 x 0.000 Watts/sqft X 3.41 Btuh/Watt x 1.00 = 0 Infiltration:1.00 X 1.064 X 690 X 10.00 X 0.50 /601 X 34 = 2 OS Ledule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 23,555 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 X L 690 I X 3001 Btuh/OCC. / 100 sgft/occ. = 2 070 Receptacle 1.00 x I 69al x 0 0001 Watts/sgft x Btuh/Watt = Process_ 1.00 x 690 x 0.000 Watts/sgft XF 3.413 Btuh/Watt = o Infiltration: 1 0o x x x 10 on x �� / 6] x z = C� chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING COIL LOADS Project Title Calle Estado, LLC KOOM INFORMATION Room Name Floor Area Indoor Dry Bulb Temperature Conduction -19 Wall .19.24.16 Double Non Metal Tinted Double Non Metal Tinted -19 Wall .19.24.16 -19 Wall .19.2x6.16 -19 Wall .19.24.16 -19 Wall W.19.24.16 0.590 0.811 U 48.0 Suite 101 1 Time of Peak 820 1 Outdoor Dry Bulb Temperature 74T Outdoor Wet Bulb Temperature Area 1 178.01 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.58001 Date 6/13/2007 DETD 1 x x x X x x x x x 37.8 = = = = = = = = = 27.9 27.9 39.2 40.1 40.2 58.2 (N) 24.0 Page Total Orientation Area X x X X X x X X x X SGF X X X X X X X X X X SC Weighting X X X x X X X X X x Factor = = = = = = = = = (N) 24.0 4 0.590 0.811 U 48.0 4 0.590 0.811 (N) 24.0 4 0.590 0.811 (N) 36.0 4 0.590 0.807 (NE) 36.0 4 0.590 1.217 (E) 36.0 4 0.590 1.532 (S) 20.0 42 0.590 0.793 5 24.0 42 0.590 0.793 I Page Total Jul 3 pm 112 9F 78 OF Btu/hr 498 2,266 1,748 185 487 1,030 65 s 277 Btulhr 471 942 471 703 1.060 1,334 393 471 5 845 Sched. Weighting Btu/hr Internal Gain Frac. Area Heat Gain Factor fights 1.0 x 820 X 0.794 Watts/sgft X 3.41 Btuh/WWatt X 0.999 = 2,219 ccu ants 1.0c x 820 x 300 Btuh/occ. I 10C sgftlocc. x 1.00 = 2,460 Receptacle 1.01 x 820 X 1.000 Watts/sgft x 3.4V Btuh[ Watt X 1.00 = 2,799 rocess 1.0 x 820 x o.o0o Watts/sgft x 3.41 BtuhMlatt x 1.00 = 0 Infiltration: FE:1.00 x 1.064 x 820 x 10.00 x 0.50 /601 x 38 = 2 763 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 22,363 Sched. Btu/hr Latent Gain Frac. Area Heat Gain ccu ants 1.00 x 820 x 3001 Btuh/occ. / 100 sgft/occ. = 2 460 Receptacle 1.00 x x Watts/sgft x I mn Btuh[Watt = Process 1.00 X 820 x 0.000 Watts/sgft X 3.413 Btuh/Watt = 0 Infiltration: 1 OD x 4.771 x 82 x x �� / 6] x chedule Air Latent Area Ceiling Height ACH &W EneravPra By EnergySaft User Number: User Page:89 of 102 1 ROOM COOLING COIL LOADS Project Title JOM INFO - - Room Name Calle Estado, LLC Area r Dry Bulb Temperature Conduction �-19 Wall rvV.19.2x6.16) Suite 102 1 Time of Peak 433 1 Outdoor Dry Bulb Temperature 740F Outdoor Wet Bulb Temperature Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Orientation Area (N) 37.8 24.0 (N) 40.2 48.0 (N) 24.0 (S) 24.0 (S) 25.0 U -Value 1 0.07401 SGF X 4 X 4 X 4 x 42 X 42 X X X x X 001 Date 6/13/2007 DETD 1 X X X X X X X X X 37.8 = = = = = 27.9 40.2 27.9 X 0.590 X 0.590 X 0.590 X 0.590 X 0.590 X X x X X Page Total Weighting Factor X 0.811 = X 0.811 = X 0.811 = x 0.793 = X 0.793 = X X = X = X. X Page Total Jul 3 pm 112 9F 78 OF Btu/hr 193 1,942 345 405 2 885 Btu/hr 471 942 471 472 491 2 847 Sched. Weighting Btu/hr Internal Gain Frac. Area Heat Gain Factor fights 1.0c x 433 X 1.289 Watts/sqft X 3.41 Btuh/Watt x 0.999 = 1,902 ccu ants 1.0 X 433 X 300 Btuh/OCC. / 101 sgft/OCc. X 1.00 = 1,29 eceptacle 1.0 X 433 X 1.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 2,217 rocess 1.0 x 433 x 0.000 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 0 Infiltration: 1.00 x 1.064 x 433 x 10.00 x 0.50 /601 x 38 = 1 459 chedule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 12,608 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 x 433 X 3001 Btuh/OCC. / 100 sgft/occ. = 1 299 Receptacle 1 00 x x o nnni Watts/sgft x Btuh/Watt = Process 1.00 X 433 x 0.000 Watts/sgft X 1 3.413 Btuh/Watt = 0 Infiltration: xx 433 x x � H / 6] x &W = 67A chedule AIr latent Area Gelling Height AC [TOTAL HOURLY LATENT HEAT GAIN FOR ROOM1.977 Energ Pro 6 EnergySoft User Number: User Page: 90 of 102 ROOM COOLING COIL LOADS (Project Title � ,OOM INFO1 Room Name Calle Estado, LLC Floor Area Indoor Dry Bulb Temperature Conduction 19 Wall W.19.24.16 Double Non Metal Tinted 19 Wall .19.24.16 Double Non Metal Tinted 19 Wall .19.2x6.16 Solid Wood Door Suite 103 jime of Peak 484 I Outdoor Dry Bulb Temperature 74c= `Outdoor Wet Bulb Temperature Area 1. Design Equivalent Temperature Difference (DETO) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 0. Date 6/13/2007 DETD 1 X X X X X X X X X 38.4 = = = = = = = = 28.3 41.1 28.3 59.1 55.2 = = = = = = = (N) 24.0 Page Total Orientation Area X X X X X X X X X X SGF X X X X X X X X XX X SC Weighting X X X X X X X X X Factor = = = = = = = (N) 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 (S) 24.0 42 0.590 0.868 (S) 25.0 42 0.590 0.868 Page Total Jul 3 pm 112 9= 78 '� Btu/hr 381 1,971 550 411 1,054 1,921 6 288 Btu/hr 509 1,018 509 516 538 3 089 Sched. Weighting Btu/hr Internal Gain Frac. Area Heat Gain Factor i hts 1.0c X 484 X 1.285 Watts/sgft X 3.41 BtuhfWatt X 1.000 = 2,123 ccu ants 1.0c X 484 X 300 Btuh/OCC. / 10 sgft/occ. X 1.00 = 1.452 Receptacle 1.0 x 484 X 0.500 Watts/sgft x 3.41 BtuhfWatt x 1.00 = 826 rocess 1.0c X 484 X 1.500 Watts/sgft X 3.41 BtuhfWatt X 1.00 = 2,478 Infiltration: 1.00 X 1.064 X 484 X 10.00 X 0.50 /601 X 38 = 1 631 chedule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 17,886 Sched. Btu/hr Latent Gain Frac. Area Heat Gain ccu ants 1.00 X 484 X 3001 Btuh/OCC. / 100 sgft/occ. = 1 452 Receptacle 1.00 x x Watts/sgft x Btuh/Watt = rocess 1.00 X�--484 X� 0.000 Watts/sgft X 3.413 Btuh[Watt = 0 Infiltration: 1 no x AtL--�7Z1I x E-4� x Ceiling x A�a / 6] x � A = 757 I EnerovPro 8v EnerovSoft User Number: User Page:91 of 102 1 ROOM COOLING COIL LOADS Conduction -19 Wall (W.19.2x6.16) Area 181 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.07401 Orientation Area X X X X X x X X x X SGF (N) 24.0 4 (N) 48.0 4 (N) 24.0 4 (S) 25.0 42 (S) 24.0 42 SC DETD 1 X X X X X X X X X 34.4 = = = = = = = = = 24.5 36.8 37.1 24.5 X 0.590 X 0.590 X 0.590 x 0.590 x 0.590 X X X X X Page Total Weighting Factor X 0.876 = X 0.876 = X 0.876 = x 0.868 = X 0.868 = X X X = X X Page Total Btu/hr 341 1,704 722 497 355 3 619 Btu/hr 509 1,018 509 538 516 3 089 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 484 X 1.285 Watts/sgft X 3.41 Btuh/Watt X 1.000 = 2,123 ccu ants 1.0c X 484 X 300 Btuh/occ. / 10 sgft/occ. X 1.00 = 1,452 Receptacle 1.0 x 484 x 0.500 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 826 rocess r1.0 X 484 X 0.000 Watts/sgft X 3.41 Btuh[Watt X 1.00 = 0 Infiltration: I 1.00 x 1.064 x 484 x 10.00 x 0.50 /601 x 34 = 1 459 chedula Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 12,567 Sched. Btulhr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 484 x 3001 Btuh/OCC. / 100 sgft/occ. = 1 452 Receptacle 1.00 x xWatts/sgft x 1 3413 BtuhfWatt = Process 1.00 x 484 x 0.000 Watts/sqft x 3.413 BtuhfWatt = o Infiltration: xx x �o2 x / 6] x[__ _�2 = chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING COIL LOADS Title Date Calle Estado, LLC 6/13/2007 Room Name Suite 105 Time of Peak Jul 3 P;Floor Area 433 Outdoor Dry Bulb Temperature 112 Indoor Dry Bulb Temperature 780F Outdoor Wet Bulb Temperature 78 9F Conduction �-19 Wall M/.19.2x6.16) 9 Wall M/.1 Area 69.01 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain indow indow indow indow indow U -Value DETD 1 34.4 = 24.5 = 37.1 = Page Total Orientation Area X X X X X x x X x X SGF X X X X X x x X xX X SC Weighting X X X X X x X X X Factor = = = = = = = = = (N) 24.0 41 - 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 (S) 24.0 42 0.590 0.868 (S) 24.0 42 0.590 0.868 Page Total Btu/hr 176 2,045 321 2 541 Btu/hr 509 1,018 509 516 516 3 067 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c x 433 x 1.289 Watts/sqft x 3.41 Btuh/Watt x 1.000 = 1,904 ccu ants 1.0c X 433 X 300 Btuh/OCC. / 10 sgftlocc. X 1.00 = 1,299 Receptacle 1.0 x 433 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 739 rocess 1.0 x 433 x 0.000 Watts/sqft x 3.41 Btuh[Watt x 1.00 = 0 Infiltration:1.00 x 1.064 X 433 X 10.00 x 0.50 /601 X 34 = 1 306 Ledule Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 10,857 Sched. Latent Gain Frac. Area Heat Gain Btu/hr occupants 1.00 x 433 x 300 Btuh/occ. / 100 sgft/occ. = 1 299 Receptacle 1.00 x x n nan Watts/sgft x L 3.4131 Btuh/Watt = Process E1.00 x 433 X 0.000 Watts/sgft x 3.413 Btuh/Watt = o Infiltration: 1_no x xE:� x x/ 60] x ®_ chedule Alr Latent Area Ceiling Height ACH ILW [ROOM COOLING COIL LOADS Project Title Date Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 106 Time of Peak Jul 3 pm Floor Area 578 Outdoor Dry Bulb Temperature 112 OF Indoor Dry Bulb Temperature 78OFOutdoor Wet Bulb Temperature 78 CIF Conduction h-19 Wall (W.19.2x6.16) ouble Non Metal Tinted Area 1 290.01 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Window Window Window U -Value 1 0.07401 DETD 1 X X X X X X X X X 34.4 = = = = = = = 24.5 36.8 55.1 Weighting X X X X X X X X X X Factor = = = = = = = (N) 24.0 Page Total Orientation Area X X X x X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = (N) 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 Page Total Btu/hr 290 1,363 82 1,183 2 918 Btu/hr 509 1,018 509 2 035 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c x 578 x 1.287 Watts/sgft x 3.41 Btuh/Watt x 1.000 = 2,539 ccu ants 1.0 X 578 X 300 Btuh/occ. / 10C sgft/occ. X 1.00 = 1,734 Receptacle 1.0 x 578 X 0.500 Watts/sgft x 3.41 BtuhlWatt X 1.00 = 986 rocess 1.0 x 578 x 0.000 Watts/sqft X 3.41 Btuh/Watt x 1.00 = 0 Infiltration: 1.00 X 1.064 X 578 X 1 10.00 X 0.50 / 60] X 34 = 1 743 chedule Air Sensible Area Ceiling Height ACH ZST Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 11,955 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 x 578 x 3001 Btuhlocc. / 100 sgft/occ. = 1734 ece tate -1.001 x xa 00oj Watts/sgft x Btuh/Watt = Process 1.00 x 578 x 0.000 Watts/sgft x 3.413 Btuh/Watt = o Infiltration:L x x 57A x 10 0o x 50 / 60] x0 = chedule Air Latent Area Ceiling Height ACH &W ROOM COOLING COIL LOADS Project Title Date Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 107 Time of Peak Jul 3 pm Floor Area 405 Outdoor Dry Bulb Temperature 112 OF Indoor Dry Bulb Temperature 78`k Outdoor Wet Bulb Temperature 78 Conduction -19 Wall .19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted Double Non Metal Tinted 19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Area 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Window Window Window U -Value 0. DETD t X X X X X X X X X 36.8 = = = = = = = = 24.5 24.5 24.5 37.1 55.1 = = = = = = (E) 24.0 Page Total Orientation Area X x X x X X X X x X SGF X X X x X X X X X X SC Weighting X X X x x X X X X X Factor = = = = = = (E) 24.0 41 0.590 1.116 1E) 48.0 4 0.590 1.116 (E) 24.0 41 0.590 1.116 Page Total Btu/hr 256 341 682 341 576 775 2 971 Btu/hr 648 1,296 648 2 593 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0 x 405 X 1.378 Watts/sqft x 3.41 Btuh/Watt x 1.000 = 1,904 Occupants 1.0c X 405 X 300 Btuh/OCC. / 10 sqft/occ. X 1.00 = 1,21 Receptacle 1.0 X 405 X 0.500 Watts/sgft x 3.41 Btuh[Watt X 1.00 = 691 rocess 1.0c X 405 X 0.000 Watts/sgft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration: 1.00 X 1.064 X 405 X 10.00 X 6] X 34 = 1 221 chedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 10,595 Sched. Btulhr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 405 X 3001 Btuh/OCC. / 100 sgft/occ. Receptacle 1.00 x x 0 Watts/sgft x 3 413l Btuhfwatt = Process 1.00 x 405 x 0.000 Watts/sgft x 1 3.413 Btuh/Watt = o Infiltration: xx A Area x x �� / 6] x � = 4?3 chedule Air Latent Area Ceiling Height ACH DW ROOM COOLING COIL LOADS (Project Title ROOM INFO Room Name Calle Estado, LLC r Area or Dry Bulb Temperature Conduction -30 Roof(R.30.2x12.16) -19 Wall W.19.2x6.16 Double Non Metal Tinted -19 Wall .19.2x6.16 Double Non Metal Tinted -19 all .19.24.16 Double Non Metal Tinted -19 Wall .19.2x6.16 Date 6/13/2007 Suite 201 619 780F Time of Peak Outdoor Dry Bulb Temperature Outdoor Wet Bulb Temperature Area X X X X X X X X X U -Value X X X X X X X X X DETD 1 = = = = = = = = = 619.0 0.0360 70.3 139.0 0.0740 34.4 120.0 0.5800 24.5 64.0 0.0740 35.8 36.0 0.5800 24.5 124.0 0.0740 36.8 36.0 0.5800 24.5 286.0 0.0740 37.1 0.590 1.594 (S) 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain indow Window Window Window indow vJindow Page Total Orientation Area X X X x X X X X X X SGF X X X X X X X X X X SC Weighting X X x X X X x X X X Factor = = = = = = = = (N) 24.0 4 0.590 0.876 (N) 48.0 4 0.590 0.876 _(N) 24.0 4 0.590 0.876 (NE) 36.0 4 0.590 1.274 Q 36.0 4 0.590 1.594 (S) 24.0 42 0.590 0.868 Page Total Jul 3 pm 112 9F 78 9F Btu/hr 1,566 354 1,704 170 511 338 511 785 5 939 Btu/hr 509 1,018 509 1,110 1,388 516 5 049 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c X 619 X 1.052 Watts/sgft X 3.41 Btuh/Watt x 1.000 = 2,222 ccu ants 1.0c X 619 X 300 Btuhlocc. / 10 sgft/occ. X 1.00 = 1,857 Receptacle 1.0 x 619 X 0.500 Watts/sqft x 3.41 Btuh[Watt x 1.00 = 1,056 rocess 1.0c X 619 X 0.000 Watts/sqft X 3.41 Btuh/Watt X X1.000 = 0 Infiltration:1.00 x 1.064 x F 619 x 10.00 x 0.50 /601 x I 341 = 1 866 Ledule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 17,990 Sched. Btulhr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 619 x 3001 Btuh/OCC. / r 100 sqft/occ. = 1857 ecetacle 1.00 x x 0,000j Watts/sgft x 1 3 413 Btuh/Watt = rocess 1.00 x 619 x 0.000 Watts/sgft x 1 3.413 Btuh/Watt = 0 Infiltration: x x x x l 6] x L�02H27 = chedule Air Latent Area Ceiling Height ACH pW ROOM COOLING COIL LOADS Project Title kOOM INFO Room Name Calle Estado, LLC =1oor Area ndoor Dry Bulb Temperature Conduction 30 Roof(R.30.2x12.16 19 Wall W.19.24.16 Double Non Metal Tinted -19 Wall .19.24.16 -19 Wall .19.24.16 Double Non Metal Tinted -19 Floor Assembly Suite 202 728 78OF Time of Peak Outdoor Dry Bulb Temperature Outdoor Wet Bulb Temperature Area X X X X X X X X X U -Value X X X X X X X X X 728.0 0.0360 64.0 0.0740 120.0 0.5800 200.0 0.0740 151.0 0.0740 30.0 0.5800 280.0 0.0370 24.0 41 0.590 0.876 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Date 6/13/2007 DETD 1 70.3 = 34.4 = 24.5 = 36.8 = 37.1 = 24.5 = 28.6 = Page Total Orientation Area X X X X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X x X X X X X Factor = = = = = = = (N) 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 (S) 30.0 42 0.590 0.868 (S) 24.0 42 0.590 0.868 Page Total Jul 3 pm 112 9F 78 OF Btu/hr 1,842 163 1,704 545 414 426 297 5 391 Btu/hr 509 1,018 509 645 516 3196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor. Btu/hr i hts 1,0C x 728 X 1.022 Wattsisqft X 3.41 BtuhfWatt X 1.000 = 2,539 ccu ants 1.0c x 728 X 300 Btuh/OCC. / 10 sqft/occ. x 1.00 = 2,184 Receptacle 1.0 X 728 X 0.500 Wafts/sgft x 3.41 Btuh/Watt X 1.00 = 1,242 rocess 1.0 X 728 X 0.000 Watts/sqft X 3.41 Btuh/Watt x 1.00 = 0 Infiltration: 1.00 X 1.064 x 728 X 10.00 X 0.50 /601 X 34 = 2 195 `schedule Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 16,748 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 x 728 x 3001 Btuh/occ. / 100 sgft/occ. = 2184 Receptacle 1.00 x x Watts/sgft x 1 3 4131 Btuh/Watt = Process 1.00 X 728 x 0.000 Watts/sgft X 1 3.413 Btuh/Watt = 0 Infiltration: xx x � x 60] x ®_ chedule AIr Latent Area Ceiling Height ACH pW ROOM COOLING COIL LOADS !Project Title Date Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 203 Time of Peak Jul 3 pm Floor Area 781 Outdoor Dry Bulb Temperature 112 `k Indoor Dry Bulb Temperature 78'� Outdoor Wet Bulb Temperature 78 97 Conduction -30 Roof(R.30.2x12.16 -19 WO .19.2x6.16 Double Non Metal Tinted -19 Wall W.19.2x6.16 -19 Wall .19.2x6.16 Solid Wood Door 19 Floor Assembly Area 781 134 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain Window Window Window indow indow U -Value 1 0.03601 X X X x X X X X X DETD 1 = = = = = = = = = 70.3 34.4 24.5 37.1 55.1 52.9 28.6 24.0 41 Page Total Orientation Area X X X X X x X X X x SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = U 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 (S) 24.0 42 0.590 0.868 (S) 30.0 42 0.590 0.868 Page Total Btu/hr 1,976 341 2,130 483 1,493 1,842 282 8 548 Btu/hr 509 1,018 509 516 645 3,196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c x 781 x 1.273 Watts/sqft x 3.41 Btuh/Watt x 1.000 = 3,392 ccu ants 1.0c x 781 x 300 Btuh/occ. / 10 sgft/occ. x 1.00 = 2,343 Receptacle 1.0 X 781 X 0.500 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 1,333 rocess 1.0 X 781 X 0.000 Watts/sgft X 3.41 Btuh/Watt x 1.00 = 0 Infiltration: I 1.00 x 1.064 x 781 x 1 10.00 x 0.50 /601 x = 2 355 a Air Sensible Area Ceiling Height ACH OT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 21,167 Sched. Btulhr Latent Gain Frac. Area Heat Gain Occupants 1.00 X 781 X 3001 Btuh/OCC./ 100 sqft/occ. = 2 343 Receptacle 1.00 x xJ Watts/sgft x Btuh/Watt = Process 1.00 x 781 X 0.000 Wafts/sgft x 3.413 Btuh/Watt = 0 Infiltration: 10o x x 7A1 x x � / 60] x ®_ chedule Air Latent Area Ceiling Height ACH pyy ROOM COOLING COIL LOADS Title Date Calle Estado, LLC 6/13/2007 Room Name Suite 204 Time of Peak Jul 3 pm Floor Area 860 Outdoor Dry Bulb Temperature 112 OF Indoor Dry Bulb Temperature 78OF Outdoor Wet Bulb Temperature 78 `F Conduction -30 Roof(R.30.2x12.16) -19 Wall .19.2x6.16 Double Non Metal Tinted -19 Wall .19.2x6.16 olid Wood Door 19 Wall .19.2x6.16 -19 Floor Assembly Area 860.0 134.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain indow indow indow indow 'lindow U -Value 1 0.03601 DETD X X X X X X X X X 70.3 = = = = = = = = = 34.4 24.5 36.8 30.8 37.1 28.6 N 24.0 Page Total Orientation Area X X X X X X X X XX X SGF X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = N 24.0 41 0.590 0.876 (N) 48.0 41 0.590 0.876 (N) 24.0 41 0.590 0.876 (S) 30.0 42 0.590 0.868 (S) 24.0 42 0.590 0.868 Page Total Btu/hr 2,176 341 2,130 997 1.071 675 282 7 s72 Btu/hr 509 1,018 509 645 516 3 196 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c X 860 X 1.264 Watts/sgft x 3.41 Btuh/Watt X 1.000 = 3,709 ccu ants 1.0 x 860 X 300 Btuh/occ. / 10sgft/occ. x 1.00 = 2,58 Receptacle 1.0 X 860 x 0.500 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 1,468 rocess 1.0c x 860 X 0.000 Watts/sqft X 3.41 Btuh/Watt X 1.00 = 0 Infiltration:Lodule 1.00 x 1.064 x 860 x 10.00 x 0.50 / 6] x 34 = 2 593 Air Sensible Area Ceiling Height ACH DT Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 21,219 Sched. Latent Gain Frac. Area Heat Gain Occupants 1 1.00 x 8601 x 3001 Btuh/occ. / 100 Sgftlocc. ece tacle1-oD x x Watts/sgft x Btuh/Watt = Process E1.0o x 860 x o.00 1 Watts/sgft x 1 3.4131 Btuh/Watt = Infiltration: L x 4 77 x aso x 10 on x � / 6] x �� _ chedule Air Latent Area Ceiling Height ACH pyy Btulhr 2 580 0 ROOM COOLING COIL LOADS ]project Title ROOM INFO Room Name Calle Estado, LLC Floor Area Indoor Dry Bulb Temperature Conduction -30 Roof R.30.2xl2.16 -19 Wall .19.24.16 Double Non Metal Tinted -19 Wall .19.24.16 ouble Non Metal Tinted -19 Wall W.19.24.16 ouble Non Metal Tinted -19 Wall .19.2x6.16 -19 Floor Assembly Suite 205 1 Time of Peak 1,733 1 Outdoor Dry Bulb Temperature 78`k Outdoor Wet Bulb Temperature Area 1,733.0 188.0 240.0 95.0 30.0 307.0 25.0 510.0 263.0 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 1 0.03601 0.03701 Orientation Area SGF SC (N) 24.0 X 4 X 0.590 (N) 48.0 X 4 X 0.590 (N) 24.0 X 4 X 0.590 (N) 24:0 X 4 X 0.590 (N) 48.0 x 4 X 0.590 (N) 24.0 X 41 X 0.590 E 30.0 X 4 X 0.590 (S) 48.0 X 42 X 0.590 (S) 25.0 X 42 X 0.590 X X Date 6/13/2007 DETD 1 70.3 = 34.4 = 24.5 = 36.8 = 24.5 = 37.1 = 24.5 = 55.1 = 28.6 = Page Total Weighting Factor X 0.876 = X 0.876 = X 0.876 = x 0.876 = x 0.876 = x 0.876 = X 1.270 = x 0.868 = x 0.868 = X Page Total Jul 3 pm 112 '' 78 9F Btu/hr 4,385 479 3,408 259 426 843 355 2,080 279 12 513 Btu/hr 509 1,018 509 509 1.018 509 922 1,032 538 6 562 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0 x 1,733 x 0.939 Watts/sqft X 3.41 Btuh/Watt x 1.000 = 5,556 ccu ants 1.0c X 1,733 X 300 Btuh/occ. / 10 sgft/occ. x 1.00 = 5,199 Receptacle 1.0c x 1,733 x 0.500 Watts/sgft X 3.41 Btuh/Watt X 1.00 = 2,957 rocess 1.0c X 1,733 X 0.000 Watts/sqft x 3.41 Btuh/Watt X 1.00 = 0 Infiltration:1.00 X 1.064 X 1 733 X 10.00 X 0.50 1601 x 34 = 5,225 Ledule Air Sensible Area Ceiling Height ACH T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 38,013 Sched. Latent Gain Frac. ccu ants 1.00 Receptacle 1.00 rocess 1.00 Infiltration: ch� Area Heat Gain Btu/hr X L 1,7331 X 3001 Btuh/OCC. / 100 sqft/occ. = 5199 x x 0 0001 Watts/sgft x 1 3 4131 Btuh[Watt = x 1,733 X 0.000 Watts/sgft x 3.413 Btuh/Watt = o x Air x Area x Ceiling Height 1t) n0 X ACH l 6] X 600 ROOM COOLING COIL LOADS Project Title 7Date Calle Estado, LLC 6/13/2007 ROOM INFORMATION DESIGN CONDITIONS Room Name Suite 206 Time of Peak Aug 3 pm Floor Area 690 Outdoor Dry Bulb Temperature 112 of Indoor Dry Bulb Temperature 78C� Outdoor Wet Bulb Temperature 78 9F Conduction -30 Roof(R.30.2x12.16) -19 Wall .19.2x6.16 -19 Wall .19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted -19 Wall W.19.2x6.16 Double Non Metal Tinted Double Non Metal Tinted Double Non Metal Tinted Area 690.0 320.0 175.0 17.5 17.5 232.5 17.5 17.5 17.5 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value 0.0360 0.0740 0.0740 0.5800 0.5800 0.0740 0.5800 0.5800 0.5800 DETD 1 X X X X X X X X X 65.2 = = = = = = = = 33.5 35.9 24.5 24.5 41.7 24.5 24.5 24.5 Page Total Orientation Area X X x X X X X X X X SGF X X X X X X X X X X SC Weighting X X X X X X X X X X Factor = = = = = = = = (E) 17.5 36 0.590 2.078 (El 17.5 36 0.590 2.078 (S) 17.5 70 0.590 1.112 (S) 17.5 70 0.590 1.112 (S) 17.5 70 0.590 1.112 (S) 17.5 70 0.590 1.112 (S) 17.5 70 0.590 1.112 (M 16.0 5 0.590 0.730 (W) 48.0 5 0.590 0.730 16.0 5 0.590 0.730 Page Total Btu/hr 1,619 792 465 248 248 717 248 248 248 4 835 Btu/hr 772 772 804 804 B04 804 804 351 1 054 351 7 319 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr fights 1.0c x 690 x 1.078 Watts/sqft X 3.41 Btuh/Watt x 1.000 = 2,539 ccu ants 1.0 x 690 x 300 Btuh/occ. / 10 sgft/occ. X 1.00 = 2,070 Receptacle 1.0 X 690 X 0.500 Watts/sgft x 3.41 Btuh/Watt X 1.00 = 1,177 rocess 1.0 x 690 x 0.000 Watts/sqft X 3.41 Btuh/Watt x 1.00 = 0 Infiltration: I 1.00 X 1.064 x 690 X 1 10.00 X 0.50 /601 X 34 = 2 08 schedule Air Sensible Area Ceiling Height ACH n T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 22,915 Sched. Latent Gain Frac. Area Heat Gain Btu/hr Occupants 1.00 x 690 X 3001 Btuh/OCC. / F 100 sgft/OCc. = 2 070 Receptacle 1.on x x 00 Watts/sgft x Btuh/Watt = Process E1.00 x 690 X 0.000 Watts/sqft x 3.413 Btuh/Watt = 0 Infiltration: L 10oJ x a 77 x 690 x x ACH / 6] x I_ Air Latent Area Ceiling Height CH pyy ROOM COOLING COIL LOADS IFroject Title t ROOO Room Name Calle Estado, LLC Floor Area Indoor Dry Bulb Temperature Conduction Suite 206 1 Time of Peak 690 1 Outdoor Dry Bulb Temperature 78`k Outdoor Wet Bulb Temperature Area 17 1. Design Equivalent Temperature Difference (DETD) Items shown with an asterisk (') denote conduction through an interior surface to another room. Solar Gain U -Value Date 6/13/2007 DETD ' 24.5 = 24.5 = 55.0 = 24.5 = 24.5 = 24.51 = 28.61 = Page Total Weighting Orientation Area SGF SC Factor x x x = x x x = x x x = x x x = x x x = X x x = x x x = X x x = x x x = x x x = Page Total Aug 3 pm 112 78 OF Btu/hr 248 248 529 227 682 227 731 2 893 Sched. Weighting Internal Gain Frac. Area Heat Gain Factor Btu/hr i hts 1.0c x 690 x 1.078 Watts/sqft x 3.41 Btuh/Watt x 1.000 = 2,539 ccu ants 1.0c x 690 x 300 Btuh/occ. / 10 Sgftlocc. x 1.00 = 2,07 Receptacle 1.0 x 690 x 0.500 Watts/sqft x 3.41 Btuh/Watt x 1.00 = 1,177 Process Chedule 1.0 x 690 x o.000 Watts/sgft x 3.41 Btuh/Watt x 1.00 = 0 Infiltration: 1.00 x 1.064 x 690 x 10.00 x 0.50 /6] x 34 = 2081 Air Sensible Area Ceiling Height ACH &T Fraction TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 22,915 Sched. Btu/hr Latent Gain Frac. Area Heat Gain Occupants 1.00 x 690 x 3001 Btuh/occ./ sqft/occ. = 2 070 Receptacle 1.00 x x Watts/sgft x 100 Btuh/Watt = Process 1.00 x 690 x 0.000 Watts/sgft xi 3.413 Btuh/Watt = 0 Infiltration: x[ x E:::� x x �_ -1601 x( _ chedule Air Latent Area Ceiling Height ACH OW