10635 (AR)Cf 4 4 • "
P.O. BOX 1504 No. 10635
Building 55-043 Firestone78-105 CALLE ESTADO
Address LA QUINTA, CALIFORNIA 92253
Owner
Narshall 11. Johnson
Mailing
BUILDING: TYPE CONST. OCC. GRP.
Address same A.P. Number
City Zip Tel.
Liz Quinta 92253 771-0125 Legal Description
Contractor Project Description
Mardav Construction Co. Expanding kitchen/dirnette area
Address
41995 Boardwalk Suite D
City Zip Tela
Palm Desert 92260 568-1793
State Lic. City
& Classif. 354179 Lic. # 1248 Sq. Ft. No. No. Dw.
Size Stories Units
Arch., Engr.,
Designer John Bund New ❑ Add ❑ Alter ❑ Repair ❑ Demolition ❑
Address Tel.
121 E. Cypress Ave 714/798--5785
City Zip State
Redlands 1 92373 Lic•# C 1.3625
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section
7000) of Division 3 of the Business and Professions Code, and my license is in full force and
effect.
SIGNATURE DATE
OWNER -BUILDER DECLARATION Estimated Valuation
I hereby affirm that I am exempt from the Contractor's License Law for the following 2,678.00
reason: (Sec. 7031.5,BusinesS and Professions Code: Any city or county which requires a
permit to construct, alter, Improve, demolish, or repair any structure, prior to its issuance also
requires the applicant for such permit to rile a signed statement that he is licensed pursuant to PERMIT AMOUNT
the provisions of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of
Division 3 of the Business and Professions Code, or that. he is exempt therefrom, and the basis
for the alleged exemption. Any violation of Section 7031.5 by 'any applicant for a permit Plan Chk. Dep.
subjects the applicant to a Civil penalty of not more than rive hundred dollars ($500).
O I, as owner of the property, or my employees with wages as their sole compensation, will Plan Chk. Bal. 35.10
do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and Const. Ijj
Professions Code: The Contractor's License Law does not apply to an owner of property who
builds or improves thereon and who does such work himself or through his own employees, Mech.
provided that such improvements are not intended or offered for sale. If, however, the building
or improvement is sold within one year of completion, the owner -builder will have the burden Electrical (�
of proving that he did not build or Improve for the purpose of sale.)
as' owner of the property, am exclusively contracting with licensed contractors to con- Plumbing
struct the project. (Sec. 7044• Business and Professions Code: The Contractor's License Law
does not apply to an owner of property who builds or Improves thereon, and who contracts for S.M.I. .3n
such projects with a contractor(s) licensed pursuant to the Contractor's License Law.)
Grading
❑ 1 am exempt under Sec. B. & P.C. for this reason
Driveway Enc.
Date Owner r f xf `rI_) 1_v f f` 'NVQ i Infrastructure
WORKERS' COMPENSATION DECLARATION
I hereby affirm that I have a certificate of consent to self -insure, or a certificate of
Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.)
Policy No. Company
❑"bopy is filed with the city. O Certified copy is hereby furnished.
TOTAL 107.40
CERTIFICATE OF EXEMPTION FROM REMARKS
WORKERS' COMPENSATION INSURANCE
(This section need not be completed if the permit is for one hundred dollars ($100) valuation
or lel certify that in the performance of thg work for which this permit is issued, I shall not
employ any person in any manner so as to become subject to the Workers' Compensation
Laws of California.
Date Owner
NOTICE TO APPLICANT: If, alter making this Certificate of Exemption youshould become ZONE: BY:
subject to the Workers' Compensation provisions of the Labor Code, you must forthwith Minimum Setback Distances:
comply with such provisions or this permit shall be deemed revoked.
Front Setback from Center Line
Rear Setback from Rear Prop. Line
CONSTRUCTION LENDING AGENCY Side Street Setback from Center Line
I hereby affirm that there is a construction lending agency for the performance of the
work for which this permit is issued. (Sec. 3097, Civil Code.) Side Setback from Property Line
Lender's Name
Lender's Address FINAL DATE INSPECTOR
This is a building permit when properly filled out, signed and validated, and is subject to
expiration if work thereunder is suspended for 180 days.
I certify that I have read this application and state that the above information is correct. Issued by: Date Permit
I agree to comply with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives -of this city to enter the above-.
mentioned property for inspection purposes. Validated by:
Signature of applicant Date
Mailing Address Validation:
City, State, Zip
CONSTRUCTION ESTIMATE
NO. ELECTRICAL FEES
NO. PLUMBING FEES
1ST FL. SQ. FT. ® $
UNITS
SLAB GRADE
2ND FL. SQ. FT.
BONDING
YARD SPKLR SYSTEM
STORAGE TANK
MOBILEHOME SVC.
BAR SINK
POR. SO. FT. ®
DUCT WORK
ROCK STORAGE
GAR. SO. FT. ®
POWER OUTLET
ROOF DRAINS
HEATING (FINAL)
OTHER APPJEQUIP.
DRAINAGE PIPING
CAR P. SO. FT.
TEMP. POLE
WALL SQ. FT.
GROUT
DRINKING FOUNTAIN
SQ FT ®
FINAL INSP.
URINAL
ESTIMATED CONSTRUCTION VALUATION $
WATER SYSTEM
WATER PIPING
NOTE: Not to be used as property tax valuation
FLOOR DRAIN
MECHANICAL FEES
AL INSP. S ,S y
WATER SOFTENER
VENT SYSTEM FAN EVAP.COOL HOOD
SIGN
WASHER(AUTO)(DISH)
APPLIANCE DRYER
GARBAGE DISPOSAL
FURNACE UNIT WALL FLOOR SUSPENDED
LAUNDRY TRAY
AIR HANDLING UNIT CFM
KITCHEN SINK
ABSORPTION SYSTEM B.T.U.
TEMP USE PERMIT SVC
WATER CLOSET'
COMPRESSOR HP
POLE,TEM/PERM
LAVATORY
HEATING SYSTEM FORCED GRAVITY
AMPERES SERV ENT
SHOWER
BOILER B.T.U.
SO. FT. ® c
BATH TUB
GAR. FIREWALL
SQ. FT. ® c
WATER HEATER
MAX. HEATER OUTPUT, B.T.U.
SO. FT. RESID ® 1% c
SEWAGE DISPOSAL
MESH
SQ.FT.GAR ® V4c
HOUSE SEWER
GAS PIPING
PERMIT FEE
PERMIT FEE
PERMIT FEE
DBL
TOTAL FEES
MICRO FEE
MECH.FEE PL.CK.FEE
CONST. FEE ELECT. FEE
SMI FEE PLUMB. FEE
STRUCTURE PLUMBING ELECTRICAL HEATING & AIR COND. SOLAR
SETBACK
GROUND PLUMBING
UNDERGROUND
A.C. UNIT
COLL. AREA
SLAB GRADE
ROUGH PLUMB.
BONDING
HEATING (ROUGH)
STORAGE TANK
FORMS
SEWER OR SEPTIC TANK
ROUGH WIRING
DUCT WORK
ROCK STORAGE
FOUND. REINF.
GAS (ROUGH)
METER LOOP
HEATING (FINAL)
OTHER APPJEQUIP.
REINF. STEEL
GAS (FINAL)
TEMP. POLE
GROUT
WATER HEATER
SERVICE
FINAL INSP.
BOND BEAM
WATER SYSTEM
GRADING
cu. yd.
$ Plus -x$_=$
LUMBER GR.
AL INSP. S ,S y
AMING 3�-
FINAL INSP.
ROOFING
REMARKS:
VENTILATION
FIRE ZONE ROOFING
FIREPLACE
SPARK ARRESTOR
GAR. FIREWALL
LATHING
MESH
/
INSULATION/SOUND
LLL
FINISH GRADING
FINAL INSPECTION
CERT. OCC.
FENCE FINAL
INSPECTOR'S SIGNATURES11NITIALS
GARDEN WALL FINAL
ARCBIUCTURILL APPROVAL. MPLIC&TXM
ALL CONSTAOCTION OE*A18.CP2ATZD BY TRIS MOMCA:IO9
MOST 9E AEIIOM FROM THS COMPLEX DAILY
Date )
Homeowner Applicant Name (a) -M,4RSN%gLL-
Address 's• O ti! 3 / i /l Es le #A 1-i4 Pu car fA CA 9 22'5 3
(Primary Residence) .
Telephone / q` r% /• O 1 2 S /Y��
(PGA West) (Lona Distance)
PGA West Address /%t ,2EST0-YE Tract Lot l.+ U& i r ,3 Q/Al
Modifications) Requested X -r a yJ go Y o r r -as t N'eat�
C /1100rc 30 LEGE"m 1 --710 /3,.dF r'a`u&ctt Wirtif lettcyE&y
+�
.( OS(- WALL - .) p e 6 /l 44 NS
Work Schedule Commencement Date 1,//'7/ 4 2 Completion Date It 7 �gZ
Contractor(s) /'Y AIZ,pA✓ r,61yS'7-/LucTt0-1y CU
TO THE ARCHITECTURAL COMMITTEE%
You are hereby advised that the above work is proposed and approval is requested. Attached
is a arawing of the work to be done and types of materials to be used as indicated on the
drawings. We understand that building permits for home improvements are required by the
City of La Quints and that the cost of the permits and responsibility of obtaining permits,
and subsequent inspection will be borne by the applicant.
We acknowledge that all approved changes in the original design will be at our expense)
that any and all damage to building structure, or other damage resulting from the
construction of the proposed improvement shall be at our (owner's) expense. Additionally,
any maintenance of the permitted improvements shall be at the applicant's expense and the
applicant agrees to hold the PGA West Residential Association harmless for the cost of
maintenance of same. Homeowner agrees to. indemnify, defend and hold harmless PGA West
Residential Association, its officers, agents and employees from any liability arising from
execution of this application.
Signatures of /
all owners riYt �. _ c= Jam✓ .� �•-�
ARCHITECTURAL CONTROL COMMITTEE
Approved Conditionally Approved Disapproved
Reason for Conditional Approval or Disapproval
Date 0.1J A y Slgnatu
Architkcturalliontroi committee Chairman
In addition to this approval, you must obtain Ciiy approval for the requested modification
as well as any other necessary building permits. You are required to submit evidence of
the Association approval to obtain the building permit. For this purpose, all blueprints
ana dans will be embossed with the Association's seal, the signature of the Property
Manager, and the date of the approval.
Complexed Work S:gnea cff by Date
PGA WEST RESIDENTIAL ASSOCIATION, INC.
bate:
M,2 /�JR.f /�1�/1 sNA G& Z70HA)d'oiJ
1_4 i2uIA) rA C 922_Sa
RE: STATUS OF ARCHITECTURAL VARIANCE REQUEST FOR:
Dear PGA West Homeowner:
We are in 'receipt of your Architectural Variance Request, dated
2 - /O- 9 Z , for the following:
[ JSide Pool [ ] Golf Ball Protection Screen
[ ] Side Spa [ ] Wall Addition
[ J .Rear Pool Room Addition
[ ] Rear Spa [ ] Atrium Enclosure
[ j Tiling of the Patio [ j Custom Landscape/Irrigation
[ ] Patio Extension [ ] TV Satelite Dish
[ ] Automatic Exterior Shutters [ ] Other
Your Architectural Variance Request for the above change(s) was
approved by the Architectural Committee on 2 -,;z S-9 -z--
When
When all work has been completed, please notify Property
Management, who will, in turn, notify the Architectural Committee
who will sign off on your original request so that your deposit
(if applicable) may be returned to you.
Your Architectural Variance Request was approved by the
Architectural Committee subject to the following conditions:
1.
2.
3.
Your Architectural Variance Request has been denied by the
Architectural Committee for the following reason(s):
1.
2.
3.
ARCH/Rev 10-91
TITLE 24 REPORT FOR:
Johnson Addition -Existing + Addition
55043 Firestone
LaDuinta, Ca. 92253
PROJECT DESIGNER:
John Robert Bund Architect
P.O. Box 1575
La Quinta, Ca. 92253
(619)564-3363 ' .
OWNER:
Jackie and Marshall Johnson
55043 Firestone
La Quinta, Ca. 92253
REPORT PREPARED BY:
John Bund
P.O. Box 1575
La Quinta, Ca. 92253
(619)564-3363
Job Number: 9122E+A
Date: 10/7/1991
The COMPLY 24 computer program has been used to perform the calculations
summarized in this compliance report. This program has interim approval
and is authorized by the California Energy Commission for use with the
Second Generation Nonresidential Building Energy Efficiency Standards
for Nonresidential Occupancies. Second Generation Residential Occupancies
shown to comply with this program conform to the results produced by the
Public Domain Point System, developed by the California Energy Commission.
This program developed by Gabel Dodd Associates (415) 428-0803. -
Table Of Contents for Title 24 Report
-------------------------------------
CoverPage ............................................................. 1
Table of Contents ....... ................... .................. 2
Form CF -1R Cortificate of Compliance: Residential ................. 3
Form MF -1R Mandatory Measures Checklist: Residential ................ b
Form P -2R Point System Summary. ...................................... 8
Form WS -1R Points Thermal.Mass Worksheet ............................ 9
Form WS -2R Interpolation Worksheet ..................................- 10
Form S Shading Coefficient (SC) Worksheet ........................... 11
Form CF -3 Construction Assemblies ................... 13
Domestic Hot Water Worksheet ....................................:.... 19
LCR t lr 1LFi T C 1:.1r LITT'TY C:�
--------------------- - - - - - - - - - - - - - - - - - - - - - - - - - - - -------------------------
Project:
------------------------
Project: Johnson Addition -Existing + Addition ; COMPLY 24 v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date.: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
7 -----------------------------------------------------------------
PROJECT ADDRESS
55043 Firestone
La Quinta, Ca. 92253
GENERAL INFORMATION
Compliance Method:
Climate Zone:
Total Conditioned Floor Area:
Building Occupancy:
Front Entry Orientation:
Number of Dwelling Units:
Floor Construction Type:
Infiltration Control:
BUILDING SHELL INSULATION
Job #: 9122E+A
Point System
15
2897 sqf t
Single Fam Att
North
1
Slab
Standard
Component
---------
Area.
----
U -Value
-------
Location/Comments
------------------------------------
R-19 Frame Wall
2002
- 0.0655
1st.
floor
space
R-38 Roof/Gyp Ceiling
2897
0.0290
1st.
floor
space
Exposed Slab
1118
0.9000
1st.
floor
space/Insul= R-0.0
Carpeted Slab
1779
0.7200
.1st.
floor
space/Insul= R-0.0
THERMAL MASS
Thick
Mass Material
---------------------
Area
(in)
Type
Location/Description
Concrete, Heavyweight
----
1118
------------
3.500 Exposed
------------------------------
1st.
floor space/Ext Mass
Concrete, Heavyweight
1779
3.500 Covered
1st.
floor space/Ext Mass
Lr-t� rIrZ LATt vF esraen2rax j -part r off) 1Lr=1R Fsa-ge 4 or
Project: Johnson Addition -Existing + Addition ; COMPLY 24 v 3.10
Designer: John Robert Bund Architect ; Building Permit No
Location: Palm Desert Date: 10/7/1991 ; Checked By
Documentation: John Bund ; Date (User # 2258)
---=-----------------------------------------------------------------------
GLAZING Glass w/Int
Location Oriftnt Area Type U -Val Sc Shade Description
--------- ------ ----- ------ ----- ----- ----- -----------------------
lst. floor space
North 76.0 Double 0.65 0.88 0.33 Double/Light Blinds
North 24.0 Double 0.65 0.88 0.33 Oouble/Light Blinds
North 87.0 Double 0.65 0.88 0.33 Double/Light Blinds
North 45.0 Double 0.65 0.88 0..33' Double/Light Blinds
East 33.0 Double 0.65 0.88 0.33 Double/Light Blinds
East 12.0 Double 0.65 0.88 "0.33 Double/Light Blinds
South 47.0 Double 0.65 0.88 0.33 Double/Light Blinds
West -53.0 Double 0.65 0.88 0.33 Double/Light Blinds
Wcst 133.0 Double 0.65 0.88 0.33 Double/Light Blinds
West 48.0 Double 0.65 0.88 0.33 Double/Light Blinds
SHADING (for Glazing above) Over
Location Exterior Device SC hang Framing Type
--------- ------------------------ ---- ---- -----------------------
1st. floor space
50 % Bug Screen 0.84 3.0 Metal w/o Mullions
None 1.00 3.0 Metal w/o Mullions
50 % Bug Screen 0.84 3.0 Metal w/o Mullions
None 1.00 6.0 Metal w/o Mullions
50 % Bug Screen 0.84 3.0 Metal w/o Mullions
None 1.00 3.0 Metal w/o Mullions
50 % Bug Screen 0.84 3.0 Metal w/o Mullions
50 % Bug Screen 0.84 3.0 Metal w/o Mullions
50 % Bug Screen 0.84 6.0 Metal w/o Mullions
50 % Bug Screen 0.84 6.0 Metal 'w/o Mullions
CERTIFICATE OF COMPLI' 'CE: Residential'(part 3 o'
--------------------- •--------------------------
Project: Johnson Addition -Existing + Addition
Designer: John Robert Bund Architect
Location: Palm Desert
3 ) CF -1R :page 5 of 19
COMPLY 24 v 3.10
Date: 10/7/1991'
Building Permit Nol
Checked By
Documentation: John Bund ; Date (User # 2258)
HVAC SYSTEMS'4inimum Output Duct Duct Manufacturer/Model No.
System Type Efficiency (Btuh) Location RVal (or approved equal)
Max. Furnace.Output: 45000 Btuh!
Cooling Exception: CFM Cooling (see Load Calcs) requires Btuh
HOT WATER, SYSTEMS Tank Manufacturer/Model No. # of Energy R-12
System Type Volume (or approved equal) Sys Credits"'Blanket
------------------- ----------------------------- ----- ------- -------
Gas Fired - 50.0 Std Gas.50 gal or less 1 0 Y
SPECIAL FEATURES/REMARKS (Add extra sheets if necessary)
COMPLIANCE STATEMENT
This Certificate of Compliance lists the building features and performance
specifications needed to comply with Title 24, Chapter 2-53 and Title 20,
Chapter 2, Subchapter 4, Article 1 of the California Administrative Code.
This certificate has been signed by the individual with overall design
responsibility and the building owner, who shall retain a copy of it and
transmit the certificate to any subsequent purchaser of the building. When
this Certificate of Compliance is submitted for a single building plan to
be built in multiple orientations, all building conservation features which
vary are indicated in the Special Features/Remarks section.
DESIGNER
John Robert Bund Architect
P.O. Bo x 1575
La Quinta, Ca. 92253
(.619)564-3363
License No:
Signed:
( Date )
DOCUMENTATION AUTHOR
John Bund
P.O. Box 1575
La Quinta, Ca. 92253
(619)564-3363
BUILDING OWNER
Jackie and Marshall Johnson
55043 Firestone
La Quinta, Ca. 92253
Signed:
( Date )
ENFORCEMENT
Name:
Agency:
Telephone:_
AGENCY
Signed: Signed:
(Date) ( DateT)
MANDATORY
MEASURES CF•' -KLIST ( part
'l
of 2 )
MF -1R
page
6 of 19
Project:
Johnson Addition -Existing
+
Addition
; COMPLY
24
, v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------------------------------------------------------------
NOTE: Lowrit3,residential buildings subject to the Standards must contain
these measures regardless of the compliance approach used. Items marked
with an asterisk (*) may be superseded by more stringent compliance
requirements listed on the Certificate of Compliance. When this checklist
is incorporated into the permit documents, the features noted shall be
considered by all parties as binding minimum component performance
specifications for the mandatory measures whether they are shown elsewhere
in the documents or on this checklist only.
BUILDING ENVELOPE MEASURES
o Sec. 2-5352(a): Minimum ceiling insulation R-19
weighted average. *
o Sec. 2-5352(b): Loose fill insulation manufacturers
labeled R -Value.
o Sec. 2-5352(c): Minimum wall insulation in framed walls R-11
weighted average (does not apply to exterior mass walls). *
o Sec. 2-5352(k): Slab edge insulation - water absorption rate
no greater than 0.3%, water vapor transmission rate no
greater than 2.0 perm/inch.
o Sec. 2-5311: Insulation specified or installed meets
California Energy Commission (CEC) quality standards.
Indicate type and form.
o Sec. 2-5352(f): Vapor barriers mandatory in Climate Zones 14
and 16 only.
o Sec. 2-5317: Infiltration/Exfiltration Controls
a. Doors and windows between conditioned and unconditioned
spaces designed to limit air leakage.
b. Doors -and windows certified.
c. Doors and windows weatherstripped; all joints and
penetrations caulked and sealed.
o Sec. 2-5352(e): Special infiltration barrier installed to
comply with Sec. 2-5351 meets CEC quality standards.
o Sec. 2-5352(d): Installation of Fireplaces
1. Masonry and factory -built fireplaces have:
a. Tight fitting, closeable metal or glass door
b. Outside air intake with damper- and control
c. Flue damper and control
2. No continuous burning gas pilots allowed.
Enforcement
MANDATORY
MEASURES CF -KLIST (part
2
of 2)
MF -1R page
7 of 19
---------------------
Project:
-----------------------------------------------------
Johnson Addition -Existing
+
Addition
; COMPLY 24
v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------------------------------------------------------------
HVAC AND PLUMBJNG SYSTEM MEASURES Enforcement
o Sec. 2-5352(8) and 2-5303: Space conditioning equipment
sizing: attach calculations..
o Sec. 2-5352(h) and 2-5315: Setback thermostat on all
applicable heating systems.
o Sec. 2-5316(a): Ducts constructed, installed and insulated
per Chapter 10, 1976 UMC.
o Sec. 2-5316(b)! Exhaust systems have damper controls.
o Sec. 2-5314(c): Gas-fired space heating equipment has
intermittent ignition devices.
o Sec. 2-5314: HVAC equipment, water heaters, showerheads and
faucets certified by the CEC.
o Sec. 2-5352(i): Water heater insulation blanket (R-12 or
greater) for storage & backup tanks for solar water heating
systems; first 5 feet of pipes closest to tank insulated
(R-3 or greater) .
o Sec. 2-5312(Exception I): Pipe insulation on steam and steam
condensate return & recirculating piping.
o Sec. 2-5318(d): Swimming Pool Heating
1. System has:
a. On/off switch on heater.
b. Weatherproof instruction plate on heater.
c. Plumbed to allow for solar.
2. 75 percent thermal efficiency.
3. Pool cover.
4. Time clock.
5. Directional water inlet.
LIGHTING AND APPLIANCE MEASURES
o Sec. 2-5352(j): Lighting - 25 lumens/watt or greater for
general lighting in kitchens and bathrooms.
o.Sec..2-5314(c): Gas fired appliances equipped with
intermittent ignition devices.
o Sec. 2-5314(a): Refrigerators, refrigerator -freezers, •
freezers and fluorescent lamp ballasts certified by the CEC.
Indicate -make and model number.
POINTS SYSTEM SUMMARY -.CLIMATE ZONE 15
P -2R page
8 of 19
--------------------- -----------------------------------------------------
Project: Johnson Addition -Existing
+ Addition
; COMPLY 24
v 3.10
Designer: John Robert Bund Architect
; Building Permit No
Location: Palm Desert
Date: 10/7/1991
; Checked By
Documentation: John Bund
---------------------------------------------------------------------------
; Date (User
# 2258)
BUILDING DATA;-
-------------
Conditioned Floor Area 2897
sgft
Number of
Stories 1
Occupancy Type Single Fam
Att
SCORE CARD Measure
Points
------------------------- -------
1. Roof Insulation
0.0290
(U -Value)
------
0
2. Wall Insulation
0.0655
(U -Value)
0
3. Raised Floor Insulation
0.0000
(U -Value)
3a. Controlled Vent Crawlspace
0.0
(R -Value)
;-> -1
4. Slab Edge Insulation
0.7858
(f2 factor)_;
5. Infiltration Standard
0
6. Glass Heat Loss
0.65
19.3%
-4
Sum
1-6 -5
7. Shade Open Area % Glass
Sc
OH Eff
%
------------
a.North 232.0 8.0 x
----
---a.
0.75
=
6.0 -2
b. East 45.0 1.6 x
0.75
x 0.88 =
1.0 0
c. South 47.0 1.6 x
0.74
x 0.85 =
1.0 O
d. West 234.0 8.1 x
0.74
x 0.76 =
4.5 1
e. Skylight 0.0 0.0 x
0.00
=
0.0 0
8. Shade Closed Area % Glass
Sc
OH Eff
%
------------
a. North 232.0 8.0 x
--------
0.28
-----
=
2.3 0
b. East 45.0 1.6 x
0.28
x 0.79 =
0.3 3
c. South 47.0 1.6 x
0.28
x 0.65 =
0.3 5
d. West 234.0 8.1 x
0.28
x 0.67 =
1.5 -1
e. Skylight 0.0 0.0 x
0.00
=
0.0 O
9. Interior Thermal Mass
0.00
-7
10. Exterior Wall Mass
0.00
0
Sum 7-10 -1
11. Heating System 0.000 HSPF
x 0.00 -Duct Eff =
0.00 Eff HSPF
-19
Zonal Control: No
12. Cooling System 0.000 SEER
x 0.00
Duct Eff =
0.00 Eff SEER
-37
13. Water Heating (see DHW Worksheet)
= 0
Point Total:
-62
Point Goal:
-62
THERMAL
MASS WORKSHEF"'
WS -1R
page
9 of 19
Project:
Johnson Addition -Existing + Addition
:COMPLY
24
v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
-------------------------------------------------------------------
INTERIOR THEI�Mi4L MASS
Mass Material
----------------------
Concrete, Heavyweight
Concrete, Heavyweight
NONE
* Mass listed above with a Wall U -Value denotes the Interior Mass credit
for Exterior Mass Walls, and are repeated below for Exterior Mass credit.
0 Sides Exposed -indicates mass covered with surface material >= R-2.
EXTERIOR MASS WALLS Exterior Exterior
Mass Material
----------------------
Concrete, Heavyweight
Concrete, Heavyweight
NONE
Sides
Wall
Mass
Interior
Interior
Sides
Wall
Mass
Mass
Mass
Thick Exposed
U -Value.
Area
Factor
Capacity
3.50 1
0.0655
1118:0
x 0.0 =
0.0
3.50 0
0.0655
1779.0
x 0.0 =
0.0
* Mass listed above with a Wall U -Value denotes the Interior Mass credit
for Exterior Mass Walls, and are repeated below for Exterior Mass credit.
0 Sides Exposed -indicates mass covered with surface material >= R-2.
EXTERIOR MASS WALLS Exterior Exterior
Mass Material
----------------------
Concrete, Heavyweight
Concrete, Heavyweight
NONE
Sides
Wall
Mass
Mass
Mass
Thick Exposed
U -Value
Area
------
Factor
--------
Capacity
--------
3.50 1
0.0655
1118.0
x 0.0 =
0.0
3.50 0
0.0655
-1779.0
x 0.0
0.0
INTERPOLATION, WEIGHT'- AVERAGE &
ADDITION WORKS =T
WS -2R page
10 of'19
Project: Johnson Addition -Existing
+ Addition
; COMPLY 24
v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit Nol
Checked By
Documentation: John Bund ' Date (User # 2258)I
-------------- ----- ----- ------------------------------------ ------ --------
INTERPOLATION.
POINT GOAL OF EXISTING PLUS ADDITION
( -63 points Exist x 2846 sqft Exist) / 2897 sqft Exist+Add = -62
Point
Point
Point
Score
Actual
Value
Score
Score
Value
Value
Point
Item
1
Value
1
2
1
2
=----
1
Score
-------
Roof
-----
4
+(
------
0.0290
-----
- 0.02)
x
-----
(
-4 -
-----
4 )
/(
0.04
-----
- 0.02)
-----
= 0
Wall
1
+(
0.0655
- 0.06)
x
(
-2 -
1 )
/(
0.08
- 0.06)
= 0
Slab Edge
2
+(
0.7858
- 0.70)
x
(
-1 -
2 )
/(
0.80
- 0.70)
_ -1
Glass Type
2
-3
+(19.2613
-19.00)
x
(
-5 -
-3)
/(20.00
-19.00)
_` -4
N Shade
Open
-2
+(
6.0273
- 6.00)
x
(
-3 -
-2)
/(
7.00
- 6.00)
_ -2
E Shade
Open
0-+(
1.0312
- 1.00)
x
(
0 -
O )
/(
2.00
- 1.00)
= 0
S Shade
Open
0
+(
1.0278
- 1.00)
x
(
0 -
0 )
/(
2.00
- 1.00)
= 0
W Shade
Open
1
+(
4.5464
- 4.00)
x
(
1 -
1 )
/(
5.00
- 4.00)
= 1
N Shade
Clsd
0
+(
2.2602
-*2.00)
x
(
-1 -
0 )
/(
3.00
- 2.00)
_ -0
E Shade
Clsd
4
+(
0.3461
- 0.00)
x
(
1 -
4 )
/(
1.00
- 0.00)
= 3
S Shade .
C1 sd
6
+(
0.2962
- 0.00)
x
(
2 -
6 )
/(
1.00
- 0.00)
= 5
W Shade
Clsd
2
+(
1.5163
- 1.00)
x
(
-3 -
2 )
/(
2.00
- 1.00)
_ -1
WEIGHTED
AVERAGE
POINTS
Type 1
Type
2
Type
3
Total
Average
Item
---------
Points
------
Area Points
---- ------
Area
----
Points
------
Area
----
Area
---=-
Points
-------
POINT GOAL OF EXISTING PLUS ADDITION
( -63 points Exist x 2846 sqft Exist) / 2897 sqft Exist+Add = -62
K
--------------------- -----------------------
Project: Johnson Addition -Existing + Addition
Designer: John Robert Bund Architect
------------------------
COMPLY 24 v 3.10
' Building Permit No
Location: Palm Desert Date: 10/7/1991
Documentation: John Bund
--------------------------------------------------------
GENERAL INFORMATION
Checked By
Date ( User # 2258 )
--------------------
1.
Glazing
Type:
Double
Glass
3.
Framing
Type:
Metal
w/o Mullions
5.
Framing/Mullion
Factor:
0.88
(from Table G-10)
6.
Interior
Shade Type:
Double/Light
Blinds
7.
SC Shade
Open:
0.88
(from Table G-9 or show calculation)
8.
SC Shade
Closed:
0.33
(from Table G-9 or -show calculation)
GLAZING, INTERIOR SHADE & FRAMING
9a. 0.88 (SC #7) 3c 0.88 (FMF #5) = 0.77 SC Shade _ Open
10a .0 .33 (SC #8) x 0.88 (FMF #5) = 0.29 SC Shade Closed
EXTERIOR SHADE Exterior Shade Type: 50 v Bug Screen
11. SC Exterior Shade: 0.84 (from Table G-11 or manufacturer's data)
12. [(0.84 (SC #11) x 0.25) + 0.75] x 0.77 (,SC #9a) = 0.74 SC Shade Open
13.'[(0.84 (SC #11) x 0.25) + 0.75) x 0.29 (SC #10a) = 0.28 SC Shade Close
OVERHANG FACTOR
Glass
Ovrhng
Dist-
Glass
Proj
OH Factor
OH Factor
Orientation
-----------
Area
-----
Depth
------
Above
-----
Height
Ratio
-----
Shade Open
Shade Clsd.,
East
33.0
3.0
/ ( 0.2
------
+ 6.7)
= 0.44
----------
0.89
----------
0.81
South
47.0
3.0
/ (,0.2
+ 6.7)
= 0.44
0.85
0.65
West
53.0
3.0
/ ( 0.2
+ 6.7)
= 0.44
0.87
0.81
West
133.0
6.0
/ ( 1.0
+ 6.7)
= 0.78
0.75
0.67
West
48.0
6.0
/ ( 1.0
+ 4.0)
= 1.20
0.65
0.54
SHADING COEFFICIENT ( ') WORKSHEET FORM S page 12 of 19
Project: Johnson Addition -Existing +.Addition ; COMPLY 24 v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------------------------------------------------------------
GENERAL INFORMATION
1. Glazing Type:
3. Framing Type:
5. Framing/Mullion Factor:
6. Interior Shade Type:
7. SC Shade Open:
8. SC Shade Closed:
Double
Metal w/o Mullions
0.88 (from Table G-10)
Double/Light Blinds
0.88 (from Table G-9 or show calculation)
0.33 (from Table G-9 or show calculation)
GLAZING, INTERIOR SHADE & FRAMING
9a. 0.88 (SC #7) x 0.88 (FMF #5) = 0.77 SC Shade Open
10a.0.33 (SC #8) x 0.88 (FMF #5) = 0.29 SC Shade Closed
EXTERIOR SHADE
Exterior Shade Type: NO EXTERIOR SHADE
OVERHANG FACTOR
Glass Ovrhng Dist Glass Proj OH Factor OH Factor
Orientation Area Depth Above Height Ratio Shade Open Shade Clsd
East 12.0 3.0 / ( 0.2 + 5 .0) = 0.58 0.86 0.75--
CONSTRUCTION ASSEMBLY'.OMPLIANCE FORM
--------------------- --------------------------
Project: Johnson Addition -Existing + Addition
Designer: John Robert Bund Architect
Location: Palm Desert
CF -3 page 13 of 19
-------------------------
COMPLY 24 v 3.10
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------------------------------------------------------------
Y-
Assembly Name: R-19 Frame Wall
Assembly Type: Wall
Assembly Tilt: 90 deg (Vertical)
Framing Percentage: 15.0 %
Framing Material: Softwood, Douglas Fir -Larch
-------=----------------------- Calculation for Framing Adjustment
Summer U -Value
0.0515 x 0.85 + 0.1416 x 0.15 = 0.0650
Winter U -Value
0.0517 x 0.85 + 0.1433 x 0.15 = 0.0655
OVERALL VALUES ADJUSTED FOR FRAMING
----------- --------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Stucco, Wood Shingles
Weight: 13.2 lb/sgft
Heat Capacity: 3.23
R -Value
15.38 15.28•
U -Value 0.0650 0.0655
Th
R=Value
Construction Components
Fr (in)
Summer
Winter
---------------------------------------------------------------------------
Outside Air Film
0.25
" 0.17
1. Stucco
0.875
0.17
0.17
2. Membrane, Vapar-Permeable Felt
0.010
0.06
0.06
3. Insulation, Mineral Wool, R-17.8
* 5.500
17.80
17.80
4. Gypsum or Plaster Board
'0.500
0.45
0.45
5.
6.
7.
8.
9.
Inside Air Film
---------------------------------------------------------------------------
0.68
0.68
Total
19.42
19.33
Framing Percentage: 15.0 %
Framing Material: Softwood, Douglas Fir -Larch
-------=----------------------- Calculation for Framing Adjustment
Summer U -Value
0.0515 x 0.85 + 0.1416 x 0.15 = 0.0650
Winter U -Value
0.0517 x 0.85 + 0.1433 x 0.15 = 0.0655
OVERALL VALUES ADJUSTED FOR FRAMING
----------- --------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Stucco, Wood Shingles
Weight: 13.2 lb/sgft
Heat Capacity: 3.23
R -Value
15.38 15.28•
U -Value 0.0650 0.0655
CONSTRUCTION ASSEMBLY 'OMPLIANCE FORM CF -3 page 14 of 19
----------------------------------------------------------------------------
Project: Johnson Addition -Existing + Addition ; COMPLY 24 v 3.10
.Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------------------------------------------------------------
Assembly Name: R-38 Roof/Gyp Ceiling
Assembly Type: Roof
Assembly Tilt: 0 deg (Horizontal Roof)
Framing Percentage: 10.0 %
Framing Material: Softwood, Douglas Fir -Larch
Calculation for Framing Adjustment
Summer U -Value
0.0241 x 0.90 + 0.0674 x 0.10 = 0.0284
Winter U -Value
0.0245 x 0.90 + 0.0702 x 0.10 = 0.0290
OVERALL VALUES ADJUSTED FOR FRAMING
-------------------------------
Sketch.of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 9.9 lb/sqft
Heat Capacity: 2.95
R -Value
35.15 34.43
U -Value 0.0284 0.0290
Th
R -Value
Construction Components
Fr *(in)
Summer
Winter
---------------------------------------------------------------------------
Outside Air Film
0.25
0.17
1. Roofing, Asbestos -Cement Shingles
0.250
0.21
0.21
2. Plywood _
0.500
0.63.
0.63
3. Air Space
12.000
1.00
0.93
4. Insulation, Mineral Wool, R-38
* 11.500
38.00
38.00
S. Gypsum or Plaster Board
0.500
0.45
0.45
6.
7.
8.
9.
Inside Air Film
--------------=------------------------------------------------------------
0.92
0.61
Total
41.46
40.87
Framing Percentage: 10.0 %
Framing Material: Softwood, Douglas Fir -Larch
Calculation for Framing Adjustment
Summer U -Value
0.0241 x 0.90 + 0.0674 x 0.10 = 0.0284
Winter U -Value
0.0245 x 0.90 + 0.0702 x 0.10 = 0.0290
OVERALL VALUES ADJUSTED FOR FRAMING
-------------------------------
Sketch.of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 9.9 lb/sqft
Heat Capacity: 2.95
R -Value
35.15 34.43
U -Value 0.0284 0.0290
CONSTRUCTION ASSEMBLY `OMPLIANCE FORM
--------------------- ---------------------------
Project: Johnson Addition -Existing + Addition
Designer: John Robert Bund Architect
Location: Palm Desert
CF -3 page 15 of 19
-------------------------
COMPLY 24 v 3.10
Date:- 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
�s
Assembly Name: Carpeted Slab
Assembly Type: Floor
Assembly Tilt: 180 deg (Horizontal Floor)
Framing Percentage: 0.0 %
Framing Material: NONE
OVERALL VALUES ADJUSTED FOR FRAMING
R -Value 3.22 3.45.
-------------------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sqft
Heat Capacity: 9.01
U -Value 0.3106 0.2899
Th
0 -value
Construction Components
Fr ('in)
Summer
Winter
---------------------------------------------------------------------------
Outside Air Film
0.25
" 0.17
1. Concrete, 140 lb, Not Dried
3.500
0.28
0.28
2. Flooring, Carpet and Fibrous Pad
0.250
2.08
2.08
3.
4.
5.
6.
7.
8.
9.
Inside Air, Film
=--------------------------------------------------------------------------
,
0.61
0.92
Total
3.22
3.45
Framing Percentage: 0.0 %
Framing Material: NONE
OVERALL VALUES ADJUSTED FOR FRAMING
R -Value 3.22 3.45.
-------------------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sqft
Heat Capacity: 9.01
U -Value 0.3106 0.2899
CONSTRUCTION ASSEMBLY-OMPLIANCE FORM CF -3 page 16 of 19
---------------------------------------------------------------------------
Project: Johnson Addition -Existing t Addition ; COMPLY 24 v 3.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit No
Checked By
Documentation: John Bund ; Date (User # 2258)
Assembly Name: Exposed Slab
Assembly Type: Floor
Assembly Tilt: 180 deg (Horizontal Floor)
Framing Percentage: 0.0
Framing Material: NONE
OVERALL VALUES ADJUSTED FOR FRAMING
-------------------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sqft
Heat Capacity: 9.00
R -Value
1.19 1.42
U -Value 0.8403 •0.7042
Th
R -Value
Construction Components
Fr (in)
Summer
Winter
---------------------------------------------------------------------------
Outside Air Film
0.25
0.17
1. Concrete, 140 Ib, Not Dried
3.500
0.28
0.28
2. Flooring, Asphalt, Lino, Vinyl or Rubber
0.010
0.05
0.05
3.
4.
5.
6.
7.
8.
9.
Inside Air Film
-----------------------------------------=---------------------------------
0.61
0.92
Total
1:19
1.42
Framing Percentage: 0.0
Framing Material: NONE
OVERALL VALUES ADJUSTED FOR FRAMING
-------------------------------
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Concrete, Asph. Shingles
Weight: 40.9 lb/sqft
Heat Capacity: 9.00
R -Value
1.19 1.42
U -Value 0.8403 •0.7042
CONSTRUCTION ASSEMBLY ,OMPLIANCE FORM CF -3 page 17 of 19
--------------------- =-------------------------- -------------------------
Project: Johnson Addition -Existing + Addition ; COMPLY 24 v 3.10
Designer: John Robert Bund Architect ; Building Permit No
Location: Palm Desert Date: 10/7/1991
Documentation: John Bund
--------------------------------------------------------
Assembly Name: Solid Wood Door
Assembly Type: Door
Assembly Tilt: 90 deg (Vertical)
Checked By
Date .( User # 2258 )
--------------------
Th R -Value
Construction Components, Fr. (in) Summer Winter
---------------------------------------------------------------------------
Outside Air Film 0.25 0.17
1. Hardwood, Maple 1.750 1.54 1.54
2.
3.
4.
5.
6.
7.
8.
9.
Inside Air Film 0.68 0.68
--------------------------------- ------------------------------------------
Framing Percentage: 0.0 %
Framing Material: NONE
Total 2.47
2.39
OVERALL VALUES ADJUSTED FOR FRAMING
R -Value
------------------------------- U -Value
Sketch of Construction Assembly
Absorptivity: 0.70
Roughness: Clear Pine
Weight: 6.1 lb/sqf t
Heat Capacity: 2.39
2.47 2.39
0.4049 0.4184
CONSTRUCTION ASSEMBLY '.OMPLIANCE FORM CF -3 page 18 of 19
Project: Johnson Addition -Existing t Addition ; COMPLY 24 v 3.10
Designer: John'Robert Bund Architect
Location: Palm Desert Date: 10/7/1991
Documentation: John Bund
--------------------------------------------------------
r-.
1
Assembly Name: Double/Light Blinds
Assembly Type: Glazing
Building Permit No
Checked By
Date ( User # 22.58 )
--------------------
Th R -Value
Construction Components Fr (in) Summer Winter
--------------------------------------------------------------------------
Outside Air Film 0.25 0.17
1. CEC Double Glazing 0.500 0.69 0.69
2.
3.
4.
S.
6.
7.
8. .
9.
Inside Air Film 0.68 0.68
---------------------------------------------------------------------------
Framing Percentage: 0.0 v
Framing Material: NONE
--------------------------------
Sketch of Construction Assembly
Winter Shading Coefficient: 0.88
Summer Shading Coefficient: 0.33
Total 1.62 1.54
OVERALL VALUES ADJUSTED FOR FRAMING
R -Value
1.-62 1.54
U -Value 0.6179 0.6500
DHW WORKSHEET ONE: ST,''.`AGE TYPE GAS OR ELECTRIC page 19 of '19
--------------------- - - - - - - - - - - - - - - - - - - - - - - - -1-----------------------------
Project:
------------------------ -
Project: Johnson Addition -Existing + Addition ; COMPLY 24 v 3,.10
Designer: John Robert Bund Architect
Location: Palm Desert
Date: 10/7/1991
Building Permit -No
Checked By
Documentation: John Bund ; Date (User # 2258)
---------------------=-----------------------------------------------------
A EQUIPMENT'Z�ATA
1
Water heater type
SG
Enter SG or SE'
2
Manufacturer &
18700
KBtu/yr/unit, see Table 1
3
Model number
140
Std Gas 50 gal or less
4
Ignition device
GP
GP, gas pilot or IID, int. ignition device
5
Tank volume
50.0
Total gallons, from CEC Appliance Directory
6
Recovery efficiency
76.0
Percent from CEC Appliance Directory
7
Standby loss
3.1
Percent/hour, from CEC Appliance Directory
8
Rated input
55000
Btu/hr, from CEC Appliance Directory
9
Number of pumps
0
( 1 kWh = 3413 Btu)
9
_
Number of Heaters
1
From building pians (total)
10
Insulation Jacket
Y
(Y/N) R-12 insulating jacket on the plans
B OPERATING DATA
1
Climate.Zone
15
See Appendix 0
2
Water heating budget
18700
KBtu/yr/unit, see Table 1
3
Tank set temp.
140
F, fixed input
4
Water main temp.
70.0
F, see Table 1.
5
Daily hot water load
50
50 or 35 gallons/unit, see Table 1
6
Ambient air temp.
72.6
F, see Table 1
7
Adj Standby Losses
0.0205
See Table 2 or Appendix B
8
No. dwelling units
1
From building plans (total)
9
Number of pumps
0
From building plans
10
Pumping energy
0.0
Watt-hr/yr per Pump, see Table 3
C
WATER HEATING ENERGY
CREDITS
SYSTEMS:
----------------------------------------------------------------------------
1
Credit name
/ B8
See Table 5
2
Annual savings
0.0
KBtu/yT/dwelling unit, see Table 5
D CALCULATE ANNUAL WATER HEATING ENERGY (KBtu/yr)
1 Recovery
load
10539.4
{ {B5
x 8.25
x( 140-B4 )x
365 x
0.0011 -C2 )x 88
2 Recovery
energy
13867.6
D1 /
A6
3 Standby
loss energy
4839.6
{ 24
- [(D2 x
1000 )/(A8
x A9
x 365 )]) x 8.25
x A5
x B7 x
365 x( 140-86) x
0.001.x A9
4 Pumping
energy
0.0
69 x
B10 -x 3.413
x 3 x
0.001
5 Total energy
18707.2
GAS
SYSTEMS:
(D2 + D3
+ D4)
/ B8
ELECTRIC: { [(D2 + D3) x 31 + D4) / 88
6 Water heating budget'
comparison -7.2 KBtu/yr/unit B2 - D5
7 Water heating budget -0.0 Points (D6 / Floor Area) x 2 x 88