12-0796 (SOL)P'.-O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number: 12 -00000796_ -
Property Address: =49924__ VIA _KATALINA
APN: 602-160-027- -
Application description: SOLAR
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 9579
Applicant:
Architect or Engineer:
! i
4SGV- (00,�
VOICE (760) 7C 012
FAX (760) 777-70
BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153
BUILDING PERMIT
Date: 8/27/12
Owner:
MASTER ASSN FOR RANCHO
C/O JACKSON DEMARCO &
P O BOX 19704
IRVINE, CA 92623
Contractor:
-REVCO SOLAR
26631 CABOT
LA QUIN
PECKENPA
ENGINEERING
ROAD SUITE
LAGUNA HILLS, CA 92653
(949)367-0740
LiC. No.: 387219
LICENSED CONTRACTOR'S DECLARATION WORKER'S COMPENSATION DECLARATION -
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with. 1 hereby affirm under penalty of perjury one of the following declarations:
Section 7000) of Division 3 of theMuioess and P�fee sionals Code, and my License is in full force and effect. I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
License Class: B CIO C46
Date:
OWNER -BUILDER DECLAPATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500)•:
(_ I I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ I I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
(_ I I am exempt under Sec. , B.&P.C. for this reason
Date: Owner:
CONSTRUCTION LENDING AGENCY -
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERMIT
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued..
_ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier STATE FUND Policy Number 9003164-12
_ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any er so as to becor^subject to the workers' com sat ion laws of California,
and agree that if I s uld become s bj ct t the workers' compen ti provisions of Section
`0 of the La C , I shall fort w' h ly w' h tho a provis n .
Date: i Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAG IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is, hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1 . Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and statet he above information is correct. I agree to ply with all
city and county ordinances and state laws relating o bw ing
construcilkn, and ereby authorize r re entatives
of this co my Jo enter upon the above-mentionedropert for inspect n urp
Date: Signature (Applicant or Age ntl:
Application Number . . . . . 12-00000796
Permit SOLAR PERMIT
Additional desc .
Permit Fee . . . . 22.50 Pln Check Fee
5.63
Issue Date . . . . Valuation
9579
Expiration Date 2/23/13
Qty Unit Charge Per
Extension.,
BASE FEE
15`.00
1.00 4.5000 'EA SOLAR COLLECTOR < 1000
4.50
1.00 3.0000 EA SOLAR EQUIP MISCELLANEOUS
3.00
Permit ELEC-MISCELLANEOUS
Additional desc .
Permit Fee . . 18.75 Plan Check Fee
4.69
Issue Date Valuation . . .
. 0
Expiration Date 2/23/13
Qty Unit Charge Per
Extension
BASE FEE
15.00
1.00 .7500 PER ELEC DEVICE/FIXTURE 1ST 20
.75
1.0.0 3.0000 EA ELEC PWR APP <=1
3.00
Special Notes and Comments
SOLAR POOL WATER HEATING SYSTEM - 576SF
COLLECTOR, ELECTRICAL CONTROL, 15A/240V
BOOSTER PUMP AND PIPING TO EXISTING POOL
PLUMBING. ALL COLLECTORS ATTACHED TO
ENGINEERED CARPORT STRUCTURE, PERMIT NO.
12-0691. 2010•CALIFORNIA.BUILDING CODES.
August 27, 2012.4:52:49 PM AORTEGA
--------------- ------ ------------------------------------------------------
Other Fees - . . . BLDG STDS ADMIN (SB1473)
1.00
Fee summary Charged Paid Credited
Due
Permit Fee Total 41.25 .00 .00
41.25
Plan Check Total 10.32 .00 .00
10.32 .
Other Fee Total' 1.00 .00 .00
1.00
Grand Total -`• 52.57 .00 .00
52.57
LQPERMIT
PfaPC17
SUNSAVERv,-4A�
SOLAR HEAT EXCHANGER
DESCRIPTION:,
The SunSaverTM Solar Collector is manufactured in Chico, California. The collector is
a specially developed, highly stabilized polyolefin and is of parallel, circular channel
design. It is unglazed, un -insulated, and designed for low temperature applications
such as swimming pool heating, heat pumps, aquiculture, and hydroponics.
DIMENSIONS:
Header Length = 50.875 in. (1.29 m)
Width (Panel body) = 47.5 in. (1.21 m)
Overall Dimensions Effective Area
4ft. X 8 ft. (1.22 X 2.44 m) 31.6 (2.94 m)
4 ft. X 10 ft. (1.22 X 3.05 m) 39.5 ft2 (3.67 m2)
4 ft. X 12 ft. (1.22 X 3:66 m) 47.8 ft2 (4.40 m2)
ROOF MOUNTING SPACE:
Width = (Number of panels X 50.875 in. (129 cm)] +24 in. (61 cm)
Length.= Panel length + 24 in. (61 cm)
RACK SPACE:
Width = (Number of panels X 50.875 in. (129 cm)]+2 in. (5 cm)
Length = Panel length + 6 in. (15 cm)
FLOW:
Maximum recommended flow = 8 gpm per panel
3.47 psi head loss (1,817 I/hr, 0.244 kg/cm2)
Minimum recommended flow = 3 gpm per panel
0.48 psi head loss (681 I/hr, 0.034 kg/cm2)
Recommended flow = 4 gpm per panel
0.87 psi head loss (908 I/hr, 0.061 kg/cm2)
PANELS PER BANK:
12 panels single end feed
(maximum)
17 panels .diagonal feed -
PRESSURE:,
NORMAL OPERATING MAXIMUM INTERMITTENT,
PRESSURE PRESSURE
80°F (27°C)
0 to 30 psi45 psi
(0 - 2.11 kg/cm2) (3.16 kg/cm2)
212°F (100°C)
0 to 5 psi 5 psi
(0 - 0.35 kg/cm2) (0.35 kg/cm2)
70°F (21°C)
Measured burst pressure of panel body = Over 300 psi (21.1 kg/cm2)
TEMPERATURE:
Normal operating temperature = 60°F to 90°F (16°C to 32°C)
Maximum continuous operating temperature = 212°F (100°C)
Maximum intermittent temperature (un -pressured) = 250°F (121°C)
Melt temperature = 338°F (170°C)
CHEMICAL RESISTANCE:
Compatible with common collector fluids
CORROSION:
Non -corrosive
FREEZING:
The system should be drained before freezing conditions occur.
WEATHERABILITY:
Weatherometer, accelerated outdoor exposure, and other extensive laboratory testing
demonstrates long-term weatherability of SunSaverTM collectors (see warranty).
Additionally, FAFCO's experience of 30+ years and over 1,000,000 collectors installed
confirms that the proprietary stabilization and high mechanical strength results in
negligible warranty over the TWELVE-YEAR warranty period.
ABSORPTIVITY: 0.96
EMISSIVITY: 0.90
TIME CONSTANT: 64 seconds
TESTED OUTPUT: 1,014 BTU/ft2 (Florida Solar Energy Center)
PERFORMANCE CURVES:
MEASURED EFFICIENCY
INCIDENT ANGLE Average flow rate 4.9 gpm (1113 Vhr)
CHARACTERISTICS Average wind velocity 2.4 mph (3.9 km/hr)
1.05
1
W
z X 0.95
<W
W U 0.9
D �
U
0.85
0.8 1 I
0 0.2 0.4 0.6 0.8 1
(1/(COS INCANG))-1
PRESSURE vs. FLOW
8
y 6
d
04
J
Q
x 2
0
90
so
70
> 60
U
Z 50
LL u 40
W 30
20
10
0
0.80
> 0.70
U
Z
W
U
W 0.60
0.50
0 1 2 3
0 1 2 3 4 5 6 7 8 FLOW RATE (gpm)
FLOW RATE (gpm per panel)
All specifications and dimensions set forth above are as estimated by FAFCO Inc., but are not intended to
be precise and should not be relied upon as precise without independent verification. These estimated
specifications and dimensions are subject to change without notice. Nothing contained herein is intended
or should be construed to expand or extend FAFCO Inc.'s warranty, or establish any express or implied
warranties of any nature, other than as contained in the Twelve Year Warranty Agreement. (FAFCO Inc.
disclaims any other warranties and assumes no duty to provide notice if it becomes aware of any
deficiencies in these estimates.) The reader accepts full responsibility for any use or application of these
estimates and specifically understands and acknowledges the limited reliability of these estimates.
0 0.05 0.1 0.15 0.2 0.25 0.3
(Ti-Ta)/I (F sgfl hr/ffn )
EFFICIENCY vs. FLOW
(for typ. conditions)
Additional test data available on request P/N 06359G
09/06
4
y w
t
WEIGHT: Without Water:
4 ft. X 8 ft.
13.5 lbs (5.04 kg) or 0.42 lbs/ft2 (2.05 kg/m2)
4 ft. X 10 ft.
15.9 lbs (5.93 kg) or 0.40 lbs/ft2 (1.95 kg/m2)
4 ft. X 12 ft.
18.3 lbs (6.83 kg) or 0.38 lbs/ft2 (1.86 kg/m2)
With Water:
4 ft. X 8 ft.
51.1 lbs (19.1 kg) or 1.60 lbs/ft2 (7.81 kg/m2)
4 ft. X 10 ft.
59.8 lbs (22.3 kg) or 1.50 lbs/ft2 (7.32 kg/m2)
4 ft. X 12 ft.
68.5 lbs (25.6 kg) or 1.43 lbs/ft2 (6.98 kg/m2)
ABSORPTIVITY: 0.96
EMISSIVITY: 0.90
TIME CONSTANT: 64 seconds
TESTED OUTPUT: 1,014 BTU/ft2 (Florida Solar Energy Center)
PERFORMANCE CURVES:
MEASURED EFFICIENCY
INCIDENT ANGLE Average flow rate 4.9 gpm (1113 Vhr)
CHARACTERISTICS Average wind velocity 2.4 mph (3.9 km/hr)
1.05
1
W
z X 0.95
<W
W U 0.9
D �
U
0.85
0.8 1 I
0 0.2 0.4 0.6 0.8 1
(1/(COS INCANG))-1
PRESSURE vs. FLOW
8
y 6
d
04
J
Q
x 2
0
90
so
70
> 60
U
Z 50
LL u 40
W 30
20
10
0
0.80
> 0.70
U
Z
W
U
W 0.60
0.50
0 1 2 3
0 1 2 3 4 5 6 7 8 FLOW RATE (gpm)
FLOW RATE (gpm per panel)
All specifications and dimensions set forth above are as estimated by FAFCO Inc., but are not intended to
be precise and should not be relied upon as precise without independent verification. These estimated
specifications and dimensions are subject to change without notice. Nothing contained herein is intended
or should be construed to expand or extend FAFCO Inc.'s warranty, or establish any express or implied
warranties of any nature, other than as contained in the Twelve Year Warranty Agreement. (FAFCO Inc.
disclaims any other warranties and assumes no duty to provide notice if it becomes aware of any
deficiencies in these estimates.) The reader accepts full responsibility for any use or application of these
estimates and specifically understands and acknowledges the limited reliability of these estimates.
0 0.05 0.1 0.15 0.2 0.25 0.3
(Ti-Ta)/I (F sgfl hr/ffn )
EFFICIENCY vs. FLOW
(for typ. conditions)
Additional test data available on request P/N 06359G
09/06
4
WEIGHT: F' Without Water:
4 ft. X 8 ft. 13.5,lbs (5.04 kg) or 0.42 lbs/fe (2.05 kg/M)
4 ft. X 10 ft. 15.9 lbs (5.93 kg) or 0.40 Ibs/fe (1.95 kg/m )
l 4 ft. X 12 ft. 18.3 lbs (6.83 kg) or 0.38 lbs/fe (1.86 kg/m2)
With Water:
4 ft. X 8 ft. 51.1 lbs (19.1 kg) or 1.60 lbs/ft2 (7.81 kg/m2)
4 ft. X 10 ft.. 59.8 lbs (22.3 kg) or 1.50 lbs/fe (7.32 kg/m2)
4 ft. X 12 ft. 68.5 lbs (25.6 kg) or 1.43 lbs/ft2 (6.98 kg/m2)
ABSORPTIVITY: 0.96 F
EMISSIVITY: 0.90
TIME CONSTANT: 64 seconds
TESTED OUTPUT: 1,014 BTU/ft2 (Florida Solar Energy Center)
PERFORMANCE CURVES: }
MEASURED EFFICIENCY
INCIDENT ANGLE Average flow rate 4.9 gpm (1113 Vhr)
CHARACTERISTICS Average wind velocity 2.4 mph (3.9 kndhr)
1
W
J
` Z K - 0.95
aw
F LL
W p 0.9
02
U
0.85
0.8
90
so
70
> 60
Z
,L a 50
LL 40
LL
W 30
L , 20
10
0
'0 0.2 - 0.4 0.6 0.8 1 -. 0 0.05 0.1 0.15 0.2 0.25 0.3 `
+� (1/(COS INCANG))-1 (rFTa)A(F scfl WnJ) -
PRESSURE vs. FLOW EFFICIENCY vs. FLOW
(for typ. conditions)
8.
6
04,
J j
Q
2
0
o.ao
0.70
.. 0' 1 2 3 4
0 1 2 3 4 5 6 7 8 FLOW RATE (gpm)
FLOW RATE (gpm per panel).
All specifications and dimensions set forth above are as estimated by FAFCO Inc., but are not intended to
be.precise and should not be relied upon as precise without independent verification. These estimated
specifications and dimensions are subject to change without notice. Nothing contained herein is intended
or should be construed to expand or extend FAFCO Inc.'s warranty, or establish any express or implied
warranties of any nature, other than as contained in the Twelve Year Warranty Agreement. (FAFCO Inc.
disclaims any other warranties and assumes no duty to provide notice if it becomes aware of any y
deficiencies in these estimates.) The reader accepts full responsibility for any use or application of these
estimates and specifically understands and acknowledges the limited reliability of these estimates.
Additional test data available on request P/N 06359G
j 09/06
Bin.#
City. of La Quiilta
Buiidiag U Safety Division
P.O. Box 1504,78-495 Calle Tampico
L.a.Quinta, CA 92253- (760) 777-7012
Building Permit Application and Tracking Sheet
Permit # (,>�(p `
Project Address:
Owner's Name:. G
A. P. Number.
Address: k&, UA
Legal Description:
Contractor. `
S
City, ST, Zip:LrAQ),3f . Z zs- 3
_ r
Telephone: "� N'j`(�r�fs •
'
Address: 7QZwo ,
ProjectDescription:
City, ST, Zip:fo
2 Z
Telephone:76o ��&\
State Lic. # : 3 8? Z City Lic. #;
Arch., Engr., Designer
Address:
City., ST, Zip:
Telephone:
State Lic. #: . w y u �'
Name of Contact Person: o
Construction Type:. Occupancy:
Project type (circle one): New Add'n Ater Repair Demo
Sq. Ft.:
# Stories:
#Univ:
Telephone # of Contact Person: (jp — �,
Estimated Value of Project
APPLICANT: DO NOT
N
Submittal
Req'd
Rec'd
TRACKING PERMfi' FEES
Plan Sets
Plan Check submitted ini?Item Amount
Structural Calm
Reviewed, ready for corrections L Ad Ian Chcck Deposit. .
Truss Calcs.
Called Contact Person an Check Balance
Tithe 24 Cales.
Pians pickeduP Construction
Flood plain plan
Plans resubmitted Methariital
Grading plan
2a1 Review, ready for correctionsfissue Electrical
Subcontattor List
Called Contact Person Plumbing
Grant Deed
Plans picked up S,M.L
H.O.A. Approval
Plans resubmitted Grading
IN HOUSE:-
'^' Review; ready for correctionsfissue Developer Impact Fee
Planning Approval
Called Contact Person
Pub. Wks. Appr '
Date of permit Issue
School Fees
Total Permit Feer