Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
BRES2015-0216
78-495 CALLE TAMPICO ' LA QUINTA, CALIFORNIA 92253 c&tit 4 4 Q" COMMUNITY DEVELOPMENT DEPARTMENT BUILDING PERMIT VOICE (760) 777-7125 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: - 6/8/2015 Application Number: BRES2015-0216 Owner: Property Address: 47.145 VIA LORCA REBERT PATTERSON � APN: 643160037 47145 VIA LORCA Application Description: PATTERSON / REPLACE FRONT ENTRY DOORS LA QUINTA, CA 92253e Property Zoning: E�31 z Application Valuation: $3,200.00 oT Applicant: Contractor: N ' ALLIANCE CONSTRUCTION ENTERPRI ALLIANCE CONSTRUCTION ENTER C 46267 MONTE VISTA'DRIVE 46267 MONTE VISTA DRIVE 35 c-7 INDIO, CA 92201 INDIO, CA 92201 M (760)222-8895 Llc. No.: 928697 LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my License is in full force and effect. License Class: B License No.: 928697 I� Dat eAr Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031:5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve,'demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: (� I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project. (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (� I am exempt under Sec. B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.), Lender's Na Lender's Add WORKER'S COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate -of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the'for which this permit is issued.. : J have and will maintain workers' compensation insurance, as required by Section 37 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier: _ Policy Number: _ I certify that in the performance of the work for which this permit is issued, I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that if I should become subject to the workers' compensation provisions of Section 3?00 of the Labor Code, I shall forthwith comply;with those provisions. (� //��/ Dat';+ l/ _ eA� Y i �1'cw Applica WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,0009. IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR :N SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. ' APPLICANT ACKNOALEDGEMENT IMPORTANT: Application is hereby made to the Building Official for a permit subject to the conditions and restrictions set forth on this application. 1. Each person upon whose behalf this applicrtion is made, each person at whose ' request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application , the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this applica tion becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellction. I certify that I have read this application and state that the above information is correct. I agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives of this city to'e�nter upon the above- mentioned property for inspection purposes. —�� -J Dat • � Signature (Applicant o- Agent):, INFORMATION tl a wsDESCRIFTION ACCOUNT�r =#� s QTY, �x AMOUNT, `f "PAID`PAID._DATE: `p F L BSAS SB1473 FEE 101-0000-20306 0 $1.00 $0.00 PAID.;BY ��� € h �tMEerste. C THOD RECEI ' P.,T #` CHECK #CLTD B Y L>* Total Paid forBUILDING STANDARDS ADMINISTRATION BSA '. $1.00 $0.00. x� DESCRIPTION ... d :'f QTY S' AMOUNT X PAID PAIDrDATE x�$s }*ACCOWNTAhv , ;x ; y+� , w SMI - RESIDENTIAL 101-0000-20308 0 $0.50 $0.00 t..V * � 544 PAYMETHOD 4 HEC_, K C vl; .a °CLTDBY Total Paid forSTRONG MOTION INSTRUMENTATION SMI: $0.50 $0.00 DESCRIPTIO .ACCOUNT;,.�' QTY, '� AMOUNTS � � 1D PAID DATE: { � a,; 1-P -A.- I* DOOR/WINDOW, REPLACE FIRST 7 101-0000-42400 0 $60.91 $0.00 PAIfD BYR ��z'METHOD ', € ';`,:RECEIPT #x CHECK #"y�aCLTD BY w"` sass x c i> .? . . J DESCRIPTION ACCOUNT " AMOUNT 4 PAID, .: PAID;DATE $ kQTY tip- DOOR/WINDOW, REPLACE, FIRST 7 PC 101-0000-42600 0 $110.22 $0.00 xtPAID BYE METHOD �'; 'RECEIPT #3„ CHECK # 4� CLTD Bl(r` $` "k -1 Total Paid forWINDOW/SLIDING GLASS DOOR/FENESTRATION: $171.13 $0.00 TOTALS:00 Y Description: PATTERSON / REPLACE FRONT ENTRY DOORS ADDITIONAL TT Type: BUILDING, RESIDENTIAL- Subtype: REMODEL Status: UNDER REVIEW Applied: 6/8/2015 SKH Approved: Parcel No: 643160037 Site Address: 47145 VIA LORCA LA QUINTA,CA 92253 Subdivision: TR 26152 Block: Lot: 163 Issued: . Lot Scl Ft: 0 Building Sq Ft: 0 Zoning: Finaled: 6/8/2015 ` RECEIVED Valuation: $3,200.00 Occupancy Type: Construction Type: Expired: No: Buildings: 0 No. Stories: 0 No. Unites: 0 , [Details: CHANGE OUT ENTRY DOUBLE DOORS LIKE FOR LIKE NO STRUCTURAL REQUIRED. [2013 ENERGY] 2013 CALIFORNIA BUILDING CODES. ADDITIONAL TT -'a. c.:F �.y--:'+� ,�, �.e;w�'x��3e'.ro •- CHRONOLOGY TYPE;`. STAFF NAME FACTION DATE GO.MPLETION DATE 1::.� NOTES„ .,. . 3.w. _ 4 G : . ;-, , ., � . ,,. PLAN CHECK SUBMITTAL STEPHANIE KHATAMI 6/8/2015 6/8/2015 RECEIVED CONTACTS' _. 'NAME TYPE < { 8�A r NAME`.,f'h ADDRESSl x.> = CITY+ STATE s ` ZIP''p PHONE ��.„ FAX _ , APPLICANT ALLIANCE CONSTRUCTION ENTERPRI 46267 MONTE VISTA INDIO CA `' 92201 _ '(760)449-0360 DRIVE CONTRACTOR ALLIANCE. CONSTRUCTION ENTERPRI 46267 MONTE VISTA INDIO ' CA 92201 (760)449-0360 DRIVE - OWNER REBERT PATTERSON 47145 VIA LORCA LA QUINTA CA 92253 (760)449-0360 I - ` ` Phnted`Monday, ]une0�ZO155�Z9�]4P�N ' Zof2 � C§~~~~~~ ^.'~~ BOND INFORMATION ATTACHMENTS BSAS SB1473 FEE 101-0000-20306 0 $1.00, $0.00 Total Paid forBUILDING STANDARDS ADMINISTRATION SMI - RESIDENTIAL 101-0000-20308 0 $0.50 177700 Total.Paid forSTRONG MOTION INSTRUMENTATION SMI: $0.50 $0.00. DOOR/WINDOW 101-0000-42400 0 $60.91 $0.00 REPLACE FIRST 7 DOOR/WINDOW, 101-0000-42600 0 $110.22 $0.06 REPLACE, FIRST 7 PC Total Paid forWINDOW/SLIDING GLASS $171.13 $6.00 DOOR/FENESTRATION: - ` ` Phnted`Monday, ]une0�ZO155�Z9�]4P�N ' Zof2 � C§~~~~~~ ^.'~~ BOND INFORMATION ATTACHMENTS - ` ` Phnted`Monday, ]une0�ZO155�Z9�]4P�N ' Zof2 � C§~~~~~~ ^.'~~ 1-�_'� La Qui ff �toYe 02 8 Fn+i(y dcor �el�oF-H-in� fb-NQ �g3�f�l-� Bin # City of La Quinta Building 8i' Safety Division P.O. Box 1504, 78-495 Calle Tampico La Quinta, CA 92253 - (760) 777-7012 Building Permit Application and Tracking Sheet Permit # Project Address: 41q5 .\41b Lorca Owner's Name: �� f-}- }�� ��►'� A. P. Number: �t �`7 —� Address: 4-7(I J �tC1 LQIroo Legal Description: lSJ► 1&3 M3 �,City, ST, Zip: LC3. GU, y -)-Vo I C, g2-2_5-75- . Contractor: A 1 I a ncc &-rr cxi i nc, 'Telephone; C71,CO> LAL4Q ©3(Do Address: 4(,01''l tl(Ac V(`J•D Or.,Project Description: City, ST, Zip: � V d (c) CA " •,I Z 01 1. C1CXJir -�1 O [(4+6n �.� �Qn Telephon �i� ZLLGCJ`� 5 <:ze<.<:> }; %y r State Lie. # : 92zs01 City Lie. #.-.- -.Arch., Arch.,Engr., Designer. ---- x Address: City, ST, Zip: Telephone:<:t .: •: >> ;.<:;:;.:; ::s::rk::rk?» >:;><;ri>Mi.:;;>:«> >>: >:!:«::<ri State Lie. # Construction TYPe• n� Occupancy: Project a circle one New Add'n Alter Repair Demos Name of Contact Person: Artadot Sq. FLDM5 # Stories:2 � # Units: Telephone # of Contact Person: 1 t(,v�Z�iZ �j n Estimated Value of Project: J ( GW APPLICANT: DO NOT WRITE BELOW THIS LINE # Submittal Req'd Recd TRACKING PERMIT FEES Plan Sets Plan Check submitted Item Amount Structural Calcs. Reviewed, ready for corrections Plan Check Deposit Truss Calcs. Called Contact Person Plan Check Balance. Title 24 Cales. Plans picked up Construction Flood plain plan Plans resubmitted Mechanical Grading plan 2"" Review, ready for correctio•nsrissue Electrical Subcontactor List Called Contact Person Plumbing Grant Deed ' . Plans picked up S.M.I. H.O.A. Approval . Plans resubmitted Grading IN HOUSE:- Jrd Review, ready for corrections/issue Developer Impact Fee Planning Approval Called Contact Person A.I.P.P. Pub. Wks. Appr Date of permit issue School Fees Total Permit Fees BUILDING ENERGY ANALYSIS'REPORT PROJECT: Patterson Residence 47-145 Via Lorca La Quinta; CA 92253 Project Designer: . Residence Remodel 47-145 Via Lorca La Quinta, CA 92253 (760) 449-0360 Report Prepared by: Tim Scott Scott Design and Title 24, Inc, 77085 Michigan Drive Palm Desert, CA 92211 r s (760) 200-4780 Job Number: . Date: 6/4/2015 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2013 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC -www.energysoft.com. EnergyPro 6.5 by Ener Soft User Number: 6712 /D: LM CERTIFI E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE N 'OD CF' ^ �iF-01 Project Name: Remodeled Residence Ca'Iculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 1 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xmi GENERAL.INFORMATION 01 Project Name Remodeled Residence Building Complies with Computer Performance 02 Calculation Description Title 24 Analysis 02 This building DOES NOT require HERS Verification 03 Project Location 47-145 Via Lorca 03 04 City La Quinta 05 Standards Version Compliance 2015 06 Zip Code 92253 07 Compliance Manager Version BEMCmpMgr 2013-3c (710) 08 Climate Zone CZ15 09 Software Version EnergyPro 6.5 10 Building Type Single Family 11 Front Orientation (deg/Cardinal) 90 12 Project Scope Addition and/or Alteration 13 Number of Dwelling Units 1 14 Total Cond. Floor Area (FT2) 2614 15 Number of Zones 1 16 CSlab Area (FT2) 2614' 17 Number of Stories 1 18 Addition Cond. Floor Area 0 19 Natural Gas Available Yes 20 Addition Slab Area (FT2) 0 21 Glazing Percentage (%) 18.0% COMPLIANCE RESULTS 01 Building Complies with Computer Performance 02 This building DOES NOT require HERS Verification 03 This building incorporates one or more Special Features shown below ENERGY USE SUMMARY 04 05 06 07 08 Energy Use (kTDV/ft2-yr) Standard Design Proposed Design Compliance Margin Percent Improvement Space Heating 7.76 7.65 0.11 1.4% Space Cooling 276.73 276.83 -0.10 0.0% 'IAQ Ventilation 0.00 0.00 0.00 0.0% Water Heating 9.45 9;45 0.00 0.0% Photovoltaic Offset -- 0.00 0.00 -- Compliance Energy Total 293.94 293.93 0.01 0.0% Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-06-04 16:38:22 CERTIFI� E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE h IOD CF' RF -01 Project Name: Remodeled Residence Calculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 2 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xml REQUIRED SPECIAL FEATURES The following are features that must be installed as condition for meeting the modeled energy performance for this computer analysis. HERS FEATURE SUMMARY The following is a summary of the features that must be field -verified by a certified HERS Rater as a condition for meeting the modeled energy performance for this computer analysis. Additional detail is provided in the building components tables below. Building -level Verifications: -- None — Cooling System Verifications: --None — HVAC Distribution System Verifications; -- None — - Domestic Hot Water System Verifications: None — ENERGY DESIGN RATING This is the sum of the, annual TDV energy consumption for energy use components included in the performance compliance approach for the Standard Design Building (Energy Budget) and the annual .TDV energy consumption for lighting and components not regulated by Title 24, Part 6 (such as domestic appliances and consumer electronics) and accounting for the annual TDV energy offset by an on-site renewable energy system. Reference Energy Use ai� Energy Design,RAing :` Margin Percent improvement Total Energy (kTDV/f2-yr)' 337.42 " ' 337 41 - ." } t 0.01 0.0% ' includes calculated Appliances and Miscellaneous Energy Use (AMEU) BUILDING - FEATURES INFORMATION 01 02 03 04 05 06 07 Project Name Conditioned Floor Area (ft2) Number of Dwelling Units Number of Bedrooms Number of Zones Number of Ventilation Cooling Systems Number of Water Heating Systems. Remodeled Residence 2614 1 3 1 1 1 ZONE INFORMATION 0 02 U3 U4' us u6 07 Zone Name Zone Type HVAC System Name Zone Floor Area (ft)Height Avg: Ceiling Water Heating System 1 Water Heating System 2 residence Conditioned HVAC1 2614 14 DHW Sys 1 Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2013 Residential Compliance: Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-06-04 16:38:22 CERTIFI` = OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE IV '•OD CF1 \iRF-01 Project Name: *Remodeled ResidenceCalculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 3 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 477145 Via Lorca -LQ Bob patterson-15.xmi OPAQUE SURFACES 01 02 03 04 05 06 07 08 09 10 Name Zone Construction Azimuth Orientation Gross Area (ft2) Window & Door Area (ft2) Tilt (deg) Status Verified . Existing Condition N Wall ex residence R-13 Wall 0 Right 1200 31.2 90 Existing No E Wall ex residence R-13 Wall 90 Front 1460 166.1 90 Existing No S Wall ex residence R-13 Wall 180 Left 1200- 88.8 90 Existing No W Wall ex residence R-13 Wall 270 Back 1460 203.3 90 Existing No Roof residence Defaul: 1978 to present 2614 _ Existing No ATTIC 01 02 03 04 OS 06 07-". 08 09- 10 Radiant Statu Verified Existing Name Construction Type Roof Rise Roof Reflectance Roof Emittance Barrier Cool Roof s Condition Attic residence Attic Roofresidence Ventilated 3 0.1 0.85 No No Existi No . ng Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-06-04 16:38:22 CERTIF�1- OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE A. 'OD CF' �1RF-01 Project Name: Remodeled Residence Calculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 4 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xml WINDOWS 01 02 03 04 05 06 Name Side of Building Area (ft) U -factor Status Verified Existing Condition Door E Wall ex 20.1 0.50 Existing No 01 02 `03 04 05 06 07 08 09 10 11 Name Surface (Orientation -Azimuth) Multlplle Width(ft) Height (ft) r Area (ft) U -factor SHGC Exterior Shading Status Verified Existing Condition ex 6x5.2 BED 2 N Wall ex (Right -0) -- -- 1 31.2 0.71 0.60 Insect Screen (default) Existing No new6X10 E Wall ex (Front -90) -- -- 1 68.0 6.31 0.28 Insect Screen (default) New N/A ex 6x6 E Wall ex (Front -90) -- -- 1 36.0 0.71 0.60 Insect Screen (default) Existing No ex 6x7 E Wall ex (Front -90) -- -- 1 ` 42.0 0.71 0.60 Insect Screen (default) Existing No ex 4X2.5 RR S Wall ex (Left -180) -- --- 1 10.0 0.71 0.60 Insect Screen (default) Existing No ex 3.5X4.5 KIT S Wall ex (Left -180), - -- 1 15.8 0.71 0.60 Insect Screen (default) Existing No ex 3x7 DIN S Wall ex (Left -180) -- -- 1 21.0 0.71 0.60 Insect Screen (default) Existing No ex 3x7 DIN 2 S Wall ex (Left -180) -- -- 1 21.0 0.71 0.60 Insect Screen (default) Existing No ex 3x7 DIN 3. S Wall ex (Left -180) --- -- 1 21.0 0.71 0.60 Insect Screen (default) 'Existing No ex 5x8 DIN W.Wall ex (Back -270) -- -- 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 DIN 2 W Wall ex (Back -270) - -- 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 5x8 DIN 3 W Wall ex (Back -270) - -- 1 40.0 0.71 0.60 Insect Screen (default) Existing No ex 3.5x5.5 RR W Wall ex (Back -270) -- -- 1 19.3 0.71 0.60 Insect Screen (default) Existing No ex 3x8 BED W Wall ex (Back -270) -- -- 1 24.0 0.71 0.60 Insect Screen (default) I Existing No ex 6X7.8 BED W Wall ex (Back -270) - -- 1 40.0 1 0.71 0.60 Insect Screen (default) I Existing No DOORS 01 02 03 04 05 06 Name Side of Building Area (ft) U -factor Status Verified Existing Condition Door E Wall ex 20.1 0.50 Existing No Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-06-04 16:38:22 . CERTIFk • E OF COMPLIANCE -RESIDENTIAL PERFORMANCE COMPLIANCE A !OD CF' RF -01 • Project Name: Remodeled Residence Calc lation Date/Time: 16:37, Thu, Jun 04, 2015 Page 5 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xmI OPAQUE SURFACE CONSTRUCTIONS 01'' 02 03 04 05 06 07 08 09 Name Zone Total Cavity Winter Design Edge Insul. R -value Construction Name Surface Type Construction Type Framing R -value U -value Assembly Layers 182 None 0.8 No Existing No • Cavity/ Frame: no insul. / 2x4 Top Chrd 2x4 Top Chord of Roof Truss @ 24 Roof Deck: Wood Siding/sheathing/decking Attic Roofresidence Attic Roofs Wood Framed Ceiling in. O.C. none 0.644 Roofing: Light Roof (Asphalt Shingle) • Inside Finish: Gypsum Board Ceilings (below Cavity/Frame: R-9.1 /2x4 Defaul: 1978 to present attic) Wood Framed Ceiling 2x4 @ 16 in. O.C. R 11 0.083 Over Floor Joists: R-1.9 insul. • Inside Finish: Gypsum Board • Cavity / Frame: R-13 / 2x4 - • Exterior Finish: Wood R-13 Wall Exterior Walls Wood Framed Wall 2x4 @ 16 in. O.C. R 13 0.095 Siding/sheathing/decking SLAB FLOORS 01 02 03 04 05 06 07 08 09 Name Zone Area (ft2) Perimeter, (ft) Edge Insul. R -value Carpeted Fraction Heated Status Verified Existing•, Condition Coveted Slab residence 2614 182 None 0.8 No Existing No BUILDING ENVELOPE - HERS VERIFICATION 01 02 03 04 Quality Insulation Installation (QII) Quality Installation of Spray Foam Insulation Building Envelope Air Leakage ACH @ 50 Pa Not Required Not Required Not Required -- WATER HEATING SYSTEMS 01 02 03 04 05 .06 07 08 Name System Type Distribution Type Water Heater Number of Heaters Solar Fraction ` (%) Status Verified Existing. Condition DHW Sys 1 DHW Pipe Insulation, All Lines DHW Heater 1 1 Annual Existing No Registration Number: Registration Date/Time: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 HERS Provider: Report Generated at: 2015-06-04 16:38:22 CERTIFI� E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE h OD CF' �RF-01 .Project Name: Remodeled Residence Calculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 6 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xm1 WATER HEATERS 01 02 03 04 05 06 07 08 Name Heater Element Type Tank Type Tank Volume (gal) Energy Factor or Efficiency Input Rating Tank Exterior - Insulation R -value Standby Loss (Fraction) DHW Heater 1 Natural Gas Small Storage 50 0.61 EF 40000-Btu/hr 0 0 WATER HEATING - HERS VERIFICATION 01 02 03 04 05 06 07 Name Pipe Insulation Parallel Piping Compact. Distribution Point -of Use Recirculation with Manual Control Recirculation with Sensor Control DHW Sys 1 n/a n/a n/a n/a n/a n/a SPACE CONDITIONING SYSTEMS 01 02 03 04 OS 06 07 08 09 Name System Type Heating System Cooling System Compressor No HERS Verification N/A Cooling Component 1 . SplitAirCond - Split air conditioning System Distribution . Fan Floor Area Verified Existing Name System Type Name Ducted Name Ducted System System Served Status Condition HVAC1 Other Heating and Heating Yes Cooling Yes Air Distribution . HVAC Fan 2614 Existing No Cooling System Component 1 Component 1r i System 1 1 HVAC - HEATING SYSTEMS 01. 02 03 Name Type Efficiency Heating Component 1 CntrlFurnace - Fuel -fired central furnace 80 AFUE HVAC - COOLING SYSTEMS 01 02 03 04 . 05 06 07 Efficiency Multi -speed Name System Type EER SEER 10.42 12 Zonally Controlled No Compressor No HERS Verification N/A Cooling Component 1 . SplitAirCond - Split air conditioning System Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-06-04 16:38:22 CERTIF( E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE P,' IOD CF' RF -01 Project Name: Remodeled Residence Calculation Date/Time:,16:37, Thu, Jun 04,'2015 Pager7 of 8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xmi ' HVAC - DISTRIBUTION SYSTEMS 01 02 •03 04 05 06 07 08 09 10 Number of Fans WH Fan 1 61 Insulation Supply Duct Return Duct Verified Existing HERS Name Type Duct Leakage R -value Location Location Bypass Duct Status Condition Verification Air Distribution ° FDucts located in attic Existing (not 4.2 Attic Attic None Existing No N/A System 1 -specified)_J IAQ (Indoor Air Quality) FANS 01 02 03 04 05 Name IAQ CFM' IAQ Fan Type IAQ Recovery Effectiveness(%a) HERS Verification SFam IAQVentRpt 0 Default 0 Not Required COOLING VENTILATION 01 02 03 04 Name Cooling Vent CFM Cooling Vent Watts/CFM Number of Fans WH Fan 1 61 0.52459 1 Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version- CF1R-04012015-710 Report Generated at: 2015-06-04 16:38:22 CERTIF� E OF COMPLIANCE - RESIDENTIAL PERFORMANCE COMPLIANCE ft. 10D CF RF -01 Project Name: Remodeled Residence Calculation Date/Time: 16:37, Thu, Jun 04, 2015 Page 8 of'8 Calculation Description: Title 24 Analysis Input File Name: Res Remodel 47-145 Via Lorca -LQ Bob patterson-15.xm1 DOCUMENTATION AUTHOR'S DECLARATION STATEMENT 1. 1 certify that this Certificate of Compliance documentation is accurate and complete. Documentation Author Name: Documentation Author Signature: Tim Scott Company: Signature Date: Scott Design and Title 24, Inc, 6/4/2015 Address: CEA/HERS Certification Identification (If applicable).- pplicable):77085 77085Michigan Drive - City/State[Palm Desert, CA 92211 Phone: (760) 200-4780 RESPONSIBLE PERSON'S DECLARATION STATEMENT I certify the following under penalty of perjury, under the laws of the State of California: 1. 1 am eligible under Division 3 of the Business and Professions Code to accept responsibility for the building design identified on this Certificate of Compliance. 2. 1 certify that the energy features and performance specifications identified on this Certificate of Compliance conform to the requirements of Title 24,Part 1 and Part 6 of the California Code of Regulations. 3.' The building design features or system design features identified on this Certificate of Compliance are consistent with the information provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the. enforcement agency for approval with this building permit application. Responsible Designer Name: Responsible -Designer Signature: Patterson Residence Remodel Company: Date Signed: Residence Remodel' - Address:. License: 47-145 Via Lorca City/State/Zip: Phone: La Quinta, CA 92253 (760) 449-0360 Registration Number: Registration Date/Time: HERS Provider: CA Building Energy Efficiency Standards - 2013 Residential Compliance Report Version - CF1R-04012015-710 Report Generated at: 2015-06-04 16:38:22 . RESIDENTIAL MEASURES SUMMARY RMS -1 Project Name Patterson Residence Building Type m Single Family ❑ Addition Alone ❑ Multi Family m Existing+ AdditiontAlteration Date 6/4/2015 Project Address 47-145 Via Lorca La Quinta California Energy Climate Zone CA Climate Zone 15 Total Cond. Floor Area 2,614 Addition 0 # of Units 1 INSULATION Construction Type Area Cavity (ft) Special Features Status Roof Wood Framed Attic R 11 2,614 Existing Wall Wood Framed R 13 4,831 Existing Door Opaque Door - no insulation 20 Existing Slab Unheated Slab -on -Grade - no insulation 2,614 Perim = 182' Existing Demising Wood Framed R 13 511 New FENESTRATION I Total Area: 4691 Glazing Percentage: 18.0%1New/Altered Average U -Factor: 0.31 Orientation Area(ft) U -Fac SHGC Overhang Sidefins Exterior Shades Status Right (N) 31.2 0.710 0.60 none none Bug Screen Existing Front (E) 68.0 0.310 0.28 none none Bug Screen New Front (E) 78.0 0.710 0.60 none none Bug Screen Existing Left (S) 88.8 0.710 0.60 none none Bug Screen Existing Rear (W) 203.3 0.710 0.60 none none Bug Screen Existing HVAC SYSTEMS Qty. Heating Min. Eff Cooling Min. Eff Thermostat Status 2 Central Furnace 80% AFUE Split Air Conditioner 12.0 SEER Setback Existing HVAC DISTRIBUTION Location Heating Duct Cooling Duct Location R -Value Status HVAC Ducted Ducted Attic 4.2 Existing WATER HEATING Qty. Type Gallons Min. Eff Distribution Status EnergyPro 6.5 by Energ ySoft User Number: 6712 RunCode: 2015-06-04T16:47:32 /D: Pae 11 of 20 2013 Low -Rise Residential Mandatory Measures Summary NOTE: Low-rise residential buildings subject to the Standards must comply with all applicable mandatory measures listed, regardless of the . compliance approach used. Excentions may annly. Review the re cnerlive rnde cerlinn fnr mnre infnrmnlinn Building Envelope Measures: §I 10.6(a)1: Doors and windows between conditioned and unconditioned spaces are manufactured to limit air leakage. § 1 10.6(a)5: Fenestration products (except field -fabricated windows) have a label listing the certified U -Factor, ce--tified Solar Heat Gain Coefficient SHGC , and infiltration that meets the requirements of § 10-111 a . §1 10.7: Exterior doors and windows are weatherstripped; all joints and penetrations are caulked and sealed. §1 10.8(a): Insulation specified or installed meets Standards for Insulating Material. Indicate type and include on the CF2R. 110.8(i):The thermal emittance and aged solar reflectance values of the cool roofing material meets the requimments of § 110.8(i) when the installation of a cool roof is specified on the CFI R. § 110.80): A radiant barrier shall have an emittance of 0.05 or less when the installation of a radiant barrier is specified on the CF] R. Minimum R-30 insulation in wood -frame ceiling; or the weighted average U -factor shall not exceed 0.031. Minimum R-19 in a § I50.0(a): rafter roof alteration. Attic access doors shall have permanently attached insulation using adhesive on mechanical fasteners. The attic access shall be gasketed to prevent air leakage. §I50.0(b): Loose fill insulation shall conform with manufacturer's installed design labeled R -value. § 150.0(c): Minimum R-13 insulation in- 2x4 inch wood framing wall or have a U -factor of 0.102 or less (R-19 irk 2x6 or 0.074 maximum U - factor). §I50.0(d): Minimum R-19 insulation in raised wood -frame floor or 0.037 maximum U=factor. § 150.0(g)1: In Climate Zones 14 and 16 a Class 11 vapor retarder shall be installed on the conditioned space side of all insulation in all exterior walls, vented attics and unvented attics with air -permeable insulation. 150.0(g)2: In Climate Zones 1-16 with unvented crawl spaces the earth floor of the crawl space shall be covered with a Class I or Class II vapor retarder. In a building having a controlled ventilation crawl space, a Class I or Class II vapor retarder shall be placed over the earth floor of § 150.0(g)3: the crawl space to reduce moisture entry and protect insulation from condensation, as specified in tha exception to Section 150.0(d). § 150.0(1): Slab edge insulation shall: have a water absorption rate, for the insulation material alone without facings, no greater than 0.3%; have water vapor permeance rate is no greater than 2.0 perm/inch, be protected from physical damage and UV light deterioration; and when installed as part of a heated slab floor meets the requirements of § 110.8 150.0 § (q) Fenestration, including skylights, separating conditioned space from unconditioned space or outdoo-s shall have a maximum U- 1 factor of 0.58; or the weighted average U -factor of all fenestration shall not exceed 0.58. Fireplaces, Decorative Gas Appliances and Gas Log Measures: § 150.0(e) I A: Masonry or factory -built fireplaces have a closable metal or glass door covering the entire opening of the firebox. § 150.0(e) I B: Masonry or factory -built fireplaces have a combustion outside air intake, which is at least six square inches in area and is equipped with a readily accessible, operable, and tight -fitting damper or a combustion -air control device. §150.0(e)1C: Masonry or factory -built fireplaces have a flue damper with a readily accessible control. § I50.0(e)2: Continuous burning pilot lights and the use of indoor air for cooling a firebox jacket, when that indoor air is vented to the outside of the building, are prohibited. Space Conditioning, Water Heating and Plumbing System Measures: §110.0-§ 110.3: HVAC equipment, water heaters, showerheads, faucets and all other regulated appliances are certifxd to the.Energy Commission. § 1 10.3(c)5: Water heating recirculation loops serving multiple dwelling units meet the air release valve, backflow prevention, pump isolation valve, and recirculation loop connection requirements of § 110.3(c)5. Continuously burning pilot lights are prohibited for natural gas: fan -type central furnaces, household cooking appliances (appli- § 110.5: ance.s without an electrical supply voltage connection with pilot lights that consume less than 150 Etu/hr are exempt), and pool ands a heaters. §150.0(h)1: Heating and/or cooling loads are calculated in accordance with ASHRAE, SMACNA or ACCA usfing design conditions specified in§I50.Oh2. § 150.0(h)3A: Installed air conditioner and heat pump outdoor condensing units shall have a clearance of at least =ive feet from the outlet of any dryer vent. §I50.0(i): Heating systems are equipped with thermostats that meet the setback requirements of §] 10.2(c). §150.00)1A: Storage gas water heaters with an energy factor equal to or less than the federal minimum standard; shall be externally wrapped with insulation having an installed thermal resistance ofR-12 or greater. § 150.00)1B: Unfired hot water tanks, such as storage tanks and backup storage tanks for solar water -heating systems, have R-12 external insulation or R-16 internal insulation where the internal insulation R -value is indicated on the exterior of the tank. For domestic hot water.system piping, whether buried or unburied: the first 5 feet of hot and cold water pipes from the storage tank, all piping with a nominal diameter of 3/4 inch or larger, all piping associated with a domestic hot water recirculation system § I50.0Q)2A: regardless of the pipe diameter, piping from the heating source to storage tank or between tanks, p ping buried below grade, and all hot water pipes from the heating source to kitchen fixtures must be insulated according to the requirements of TABLE 120.3- A. § 150.00)2B: All domestic hot water pipes that are buried below grade must be installed in a water proof and no -i-crushable casing or sleeve that allows for installation, removal, and replacement of the enclosed pipe and insulation. 2013 Low -Rise Residential Mandatory Measures Summary §I50.0Q)2C: Pipe for cooling system lines shall be insulated as specified in §I50.00)2A. Piping insulation for steam and hydronic heating systems or hot waters stems with pressure > 15 psig shall meet the requirements in TABLE 120.3-A. § 150.00)3: Insulation is protected from damage, including that due to sunlight, moisture, equipment maintenance, and wind. Insulation exposed to weather shall either be rated for outdoor use or installed with a cover suitable for outdoor service. For § I50.00)3A: example, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation protected as specified or painted with coating that is water retardant and provides shielding from solar radiation that degrades -:he material. Insulation covering chilled water piping and refrigerant suction piping located outside the conditioned space shall have a Class I § I50.00)3B: or Class II vapor retarding facing, or the insulation shall be installed at the thickness that qualifies as s Class I or Class 11 vapor retarder. Systems using gas or propane water heaters to serve individual dwelling units shall include: a 120V electrical receptacle within 3 feet of the water heater; a Category III or IV vent, or a Type B vent with straight pipe between the outside termination and the § 150.0(n)] : space where the water heater is installed; a condensate drain that is no more than 2 inches higher than the base of the installed water heater, and allows natural draining without pump assistance; and a gas supply line with a capacity of at least 200,000 Btu/hr. § 150.0(n)2: Recirculating loops serving multiple dwelling units shall meet the requirements of § 110.3(c)5. § I50.0(n)3: Solar water -heating systems and collectors shall be certified and rated by the Solar Rating and Certif cation Corporation (SRCC) or by a testing agency approved by the Executive Director. Ducts and Fans Measures: All air -distribution system ducts and plenums installed are sealed and insulated to meet the requirem,-nts of CMC §601.0, §602.0, §603.0, §604.0, §605.0 and ANSI/SMACNA-006-2006 HVAC Duct Construction Standards Metal and Flexible 3rd Edition. Supply -air and return -air ducts and plenums are insulated to a minimum installed level of R-6.0 (or tigher if required by CMC §605.0) or enclosed entirely in directly conditioned space as confirmed through field verification and diagnostic testing (RA3.1.4.3.8). Connections of metal ducts and inner core of flexible ducts are mechanically fastene 9. Openings shall be sealed §I50.0(m)1: with mastic, tape, or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than '/4 inch, the combination of mastic and either mesh or tape shall be used. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts. installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. Factory -Fabricated Duct Systems shall comply with specified requirements for duct construction, connections, and closures; joints § 150.0(m)2: and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive duct tapes unless such tape is used in combination with mastic and draw bands. § 150.0(m)3-6: Field -Fabricated Duct Systems shall comply with requirements for: pressure -sensitive tapes, mastic, sealants, and other requirements specified for duct construction; duct insulation R -value ratings; duct insulation thickness; and duct labeling. § 150.0(m)7: All fan systems that exchange air between the conditioned space and the outside of the building must have backdraft or automatic ' dampers. § I50.0(m)8: Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operated.dampers except combustion inlet and outlet air openings and elevator -shaft vents. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment mairtenance, and wind but not § I50.0(m)9: limited to the following: insulation exposed to weather shall be suitable for outdoor service. For exEmple, protected by aluminum, sheet metal, painted canvas, or plastic cover. Cellular foam insulation shall be protected as above of painted with a coating that is water retardant and provides shielding from solar radiation. §I50.0(m)10: Flexible ducts cannot have porous inner cores. When space conditioning systems use forced air duct systems to supply conditioned air to an occupiable space, the ducts shall be §I50.0(m)11: sealed and duct leakage tested, as confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Mechanical systems that supply air to an occupiable space through ductwork exceeding 10 feet in I:ngth and through a thermal §I50.0(m)12: conditioning component, except evaporative coolers, shall be provided with air filter devices that meet the requirements of §150.0 m 12. Space conditioning systems that utilize forced air ducts to supply cooling to an occupiable space shall have a hole for the placement of a static pressure probe (HSPP), or a permanently installed static pressure probe (PSPI) in the supply plenum. The § I50.0(m)13: space conditioning system must also demonstrate airflow 2:350 CFM per ton of nominal cooling capacity through the return grilles, and an air=handling unit fan efficacy:5 0.58 W/CFM as confirmed by field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Zonally controlled central forced air cooling systems shall be capable of simultaneously delivering in every zonal control mode, §I50.0(m)l5: an airflow from the dwelling, through the air handler fan and delivered to the dwelling, of> 350 C -M per ton of nominal cooling capacity, and operating at an air -handling unit fan efficacy of <_ 0.58 W/CFM as confirmed by fielc verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. All dwelling units shall meet the requirements of ASHRAE Standard 62.2. Neither window operat.on nor continuous operation of § 150.0(0): central forced air system air handlers used in central fan integrated ventilation systems are permissible methods of providing the Whole Building Ventilation. §150.0(o)]A: Whole Building Ventilation airflow shall be confirmed through field verification and diagnostic testing, in accordance with Reference Residential Appendix RA3. Pool and.Spa Heating Systems and Equipment Measures: Any pool or spa heating system shall be certified to have: a thermal efficiency that complies with the Appliance Efficiency § 110.4(a): Regulations; an on-off switch mounted outside of the heater. that allows shutting off the heater wifiout adjusting the thermostat setting; a permanent weatherproof plate or card with operating instructions; and shall not use elecric resistance heating. 2013 Low -Rise Residential Mandatory Measures Summary § 1 10.4(b)1: Any pool or spa heating equipment shall be installed with at least 36 inches of pipe between filter and heater or dedicated suction and return lines, or built-up connections for future solar heating. § 1 10.4(b)2: Outdoor pools or spas that have a heat pump or gas heater shall have a cover. § 110.4(b)3: Pools shall have directional inlets that adequately mix the pool water, and a time switch that will allow all pumps to be set or pro - rammed to run only during off-peak electric demand periods. §1 10.5: Natural gas pool and spa heaters shall not have a continuous burning pilot light. § 150.0(p): Residential pool systems or equipment shall meet specified pump sizing, flow rate, piping, filters, and valve requirements. Lighting Measures: § 110.9: All lighting control devices and systems, ballasts, and luminaires shall meet the applicable requirements of § 110.9. 150.0(k) I A: Installed luminaires shall be classified as high -efficacy or low -efficacy for compliance with § 150.0(k) in accordance with TABLE 150.0-A or TABLE 150.0-13, as applicable. § 150.0(k)I B: When a high efficacy and low efficacy lighting system are combined in a single luminaire, each system shall separately comply with the applicable provisions of § 150.0(k).- The wattage and classification of permanently installed luminaires in residential kitchens shall be determined in accordance with § I50.0(k)I C: § I30.0(c). In residential kitchens, the wattage of electrical boxes finished with a blank cover or where no electrical equipment has been installed, and where the electrical box can be used for a luminaire or a surface mounted ceiling fan, shall be calculated as 180 watts of low efficacy lighting er electrical box. § 150.0(k)I D: Ballasts for fluorescent lamps rated 13 watts or greater shall be electronic and shall have an output frequency no less than 20 kHz. Permanently installed night lights and night lights integral to installed luminaires or exhaust fans shall be rated to consume no § I50.0(k)I E: more than 5 watts of power per luminaire or exhaust fan as determined in accordance with § I30.0(c). Night lights do not need to be controlled by vacancy sensors. § 150.0(k) I F: Lighting integral to exhaust fans (except when installed by the manufacturer in kitchen exhaust hoods) shall meet the applicable requirements of §150.0(k). § 150.0(k)2A: High efficacy luminaires must be switched separately from low efficacy luminaires. §150.0(k)2B: Exhaust fans shall be switched separately from lighting systems. §I50.0(k)2C: Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF. §.150.0(k)2D: Controls and equipment are installed in accordance with manufacturer's instructions. § 150.0(k)2E: No control shall bypass a dimmer or vacancy sensor function if the control is installed to comply with § I50.0(k). i § 150.0(k)2F: Lighting controls comply with applicable requirements of § 110.9. An Energy Management Control System (EMCS) may be used to comply with dimmer requirements if: it functions as a dimmer § I50.0(k)2G: according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of §130.5; and all other requirements in §150.0(k)2. An Energy Management Control System (EMCS) may be used to comply with vacancy sensor requirements of § I50.0(k) if: it § 150.0(k)2H: functions as a vacancy sensor according to § 110.9; meets Installation Certificate requirements of § 130.4; the EMCS requirements of § 130.5; and all other requirements in §150.0(k)2. § 150.0(k)21: A multiscene programmable controller may be used to comply with dimmer requirements of this section if it provides the functionality of a dimmer according to §110.9, and complies with all other applicable requirements in §150.0(k)2. § I50.0(k)3A: A minimum of 50 percent of the total rated wattage of permanently installed lighting in kitchens shall be high efficacy. Kitchen lighting includes all permanently installed lighting in the kitchen except internal lighting in cabinets that illuminate only § I50.0(k)3B: the inside of the cabinets. Lighting in areas adjacent to the kitchen, including but not limited to dining and nook areas, are considered kitchen lighting if they are not separately switched from kitchen lighting. § 150.0(k)4: Permanently installed lighting that is internal to cabinets shall use no more than 20 watts of power per linear foot of illuminated cabinet. § I50.0(k)5: A minimum of one high efficacy luminaire shall be installed in each bathroom; and all other lighting installed in each bathroom shall be high efficacy or controlled by vacancy sensors. § 150.0(k)6: Lighting installed in attached and detached garages, laundry rooms, and utility rooms shall be high efficacy luminaires and controlled by vacancy sensors. § I50.0(k)7: Lighting.installed in rooms or areas other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy, or shall be controlled by either dimmers or vacancy sensors. Luminaires recessed into ceilings shall: be listed for zero clearance insulation contact (IC) by Underwriters Laboratories or other nationally recognized testing/rating laboratory; have a label that certifies that the luminaire is airtight with air leakage less than 2.0 CFM at 75 Pascals when tested in accordance with ASTM E283; be sealed with a gasket or caulk between the luminaire housing §150.0(k)8: and ceiling, and shall have all air leak paths between conditioned and unconditioned spaces sealed with a gasket or caulk; and allow ballast maintenance and replacement without requiring cutting holes in the ceiling. For recessed compact fluorescent luminaries with ballasts to qualify. as high efficacy for compliance with §I50.0(k), the ballasts shall be certified to the Energy Commission to comply with the applicable requirements in § 110.9. For single-family residential buildings, outdoor lighting permanently mounted to a residential building or other buildings on the same lot shall be high efficacy, or may be low efficacy if it meets all of the following requirements: i. Controlled by a manual ON and OFF switch that does not override to ON the automatic actions of Items ii or iii below; and § I50.0(k)9A: ii. Controlled by a motion sensor not having an override or bypass switch that disables the motion sensor, or controlled by a motion sensor having a temporary override switch which temporarily bypasses the motion sensing function and automatically reactivates the motion sensor within 6 hours; and iii. Controlled by one of the following methods: 2W Low -Rise Residential Mandatory Measures Summary a. Photocontrol not having an override or bypass switch that disables the photocontrol; or b. Astronomical time clock not having an override or bypass switch that disables the astronomical time clock, and which is programmed to automatically turn the outdoor lighting OFF during daylight hours; or c. Energy management control system which meets all of the following requirements: At a minimum provides the functionality of an astronomical time clock in accordance with §1 10.9; meets the Installation Certification requirenter..ts in §130.4; meets the requirements for an EMCS in §130.5; does not have an override or bypass switch that allows the luminaire to be always ON; and, is programmed to automatically turn the outdoor lighting OFF during daylight hours. For low=rise multifamily residential buildings, outdoor lighting for private patio's, entrances, balconieE, and porches: and outdoor lighting for residential parking lots and residential carports with less than eight vehicles per site shall :omply with one of the § 150.0(k)9B: following requirements: i. Shall comply with §I50.0(k)9A; or ii. Shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141 0. §I50.0(k)9C: For low-rise residential buildings with four or more dwelling units, outdoor lighting not regulated by 5150.0(k)9B or 150.0(k)9D shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0. § 150.0(k)9D: Outdoor lighting for residential parking lots and residential carports with a total of eight or more vehicles per site shall comply with the applicable requirements in §110.9, §130.0, §130.2, §130.4, §140.7 and §141.0. § I50.0(k)10: Internally illuminated address signs shall comply with §140.8; or shall consume no more than 5 watts -of power as determined according to § 130.0(c). §I50.0(k)11: Lighting for residential parking garages for eight or more vehicles shall comply with the applicable requirements for nonresidential garages in §110.9 130.0, 130.1, §130.4 140.6, and 141.0. In a low-rise multifamily residential building where the total interior common area in a single building equals 20 percent or less of §1 50.0(k)12A: the floor area, permanently installed lighting for the interior common areas in that building shall be high efficacy luminaires or controlled by an occupant sensor. In a low-rise multifamily residential building where the total interior common area in a single building equals more than 20 percent of the floor area, permanently installed lighting in that building shall: §I50.0(k)1213: i• Comply with the applicable requirements in §110.9, §130.0, §130.1, §140.6 and §141.0; and ii. Lighting installed in corridors and stairwells shall be controlled by occupant sensors that reduce the lighting power in each space by at least 50 percent. The occupant sensors shall be capable of turning the light fully On and C ff from all designed paths of ingress and egress. Solar Ready Buildings: Single family residences located in subdivisions with ten or more single family residences and where the application for a § 110.10(a)l: tentative subdivision map for the residences has been deemed complete, by the enforcement agency, on or after January 1, 2014, shall comply with the requirements of §110.10 b through §110.10(e). 1 §I 10.10(a)2: Low-rise multi -family buildings shall comply with the requirements of §110.10(b) through §110.10(c). The solar zone shall have a minimum total area as described below. The solar zone shall comply with access, pathway, smoke ventilation, and spacing requirements as specified in Title 24, Part 9 or other Parts of Title 24 or in any requirements adopted by a local jurisdiction. The solar zone total area shall be comprised of areas that have no dimension less than 5 feet and are no less than 80 square feet each for buildings with roof areas less than or equal to 10,000 square feet or no less then 160 square feet each for §110.10(b)l: buildings with roof areas greater than 10,000 square feet. For single family residences the solar zone shall be located on the roof or overhang of the building and have a total area no less than 250 square feet. For low-rise multi -family buildings the solar zone shall be located on the roof o- overhang of the building or on the roof or overhang of another structure located within 250 feet of the building or on covered par.1ing installed with the building project and have a total area no less than 15 percent of the total roof area of the building exc-uding any skylight area. § 110.10(b)2: All sections of the solar zone located on steep -sloped roofs shall be oriented between 110 degrees and 270 degrees of true north. 1 10.10(b)3A: No obstructions, including but not limited to, vents, chimneys, architectural features, and roof mountcd equipment, shall be located in the solar zone. Any obstruction, located on the roof or any other part of the building that projects above a solar zone shall be located at least twice § 1 10.10(b)3B: the distance, measured in the horizontal plane, of the height difference between the highest point of the obstruction and the horizontal projection of the nearest point of the solar zone measured in the vertical plane. § 110.10(b)4: For areas of the roof designated as solar zone, the structural design loads for roof dead load and roof five load shall be clearly indicated on the construction documents. The construction documents shall indicate: a location for inverters and metering equipment and a pafiway for routing of conduit § 1 10.10(c): from the solar zone to the point of interconnection with the electrical service (for single family residences the point of interconnection will be the main service panel); a pathway for routing of plumbing from the solar zone to the water -heating system. § 1 10.10(d): A copy of the construction documents or a comparable document indicating the information from § 1 10.10(6) through § 110.10(c) shall be provided to the occupant. §I 10.10(e)1: The main electrical service panel shall have a minimum busbar rating of 200 amps. The main electrical service panel shall have a reserved space to.allow for the installation of a double pole circuit breaker for a § 110.10(e)2: future solar electric installation. The reserved space shall be: positioned at the opposite (load) end from the input feeder location or main circuit location, and permanently marked as "For Future Solar Electric". HVAC HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY Project Name Date `Patterson Residence 6/4/2015 System Name Floor Area HVAC 2,614 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 2 COIL CFM Total Room Loads 3,020 Return Vented Lighting Return Air Ducts Return Fan Ventilation 610 Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COOLING PEAK COIL HTG. PEAK Heating System Sensible Latent CFM Sensible Output per System 89,000 66,488 5,133 1,211 60,762 Total Output Btuh 178,000 0 Output Btuh/s ft 68.1 5,638 4,317 Cooling System 0 0 Output per System 58,000 26,034 187245 610 28,918 Total Output Btuh 116,000 0 23,377 0 Total Output ons 9.7 5,638 4,317 Total Output Stuh/s ft 44.4 Total Output. s ft/Ton 270.4 103,798 98,314 Air System CFM per System 1,400 HVAC EQUIPMENT SELECTION Airflow cfm 2,800 -Existing HVAC 98,954 0 178,000 Airflow cfm/s ft 1.07 'Airflow cfmrron 289.7 Outside Air % 21.8% Total Adjusted System Output 98,954 (Adjusted for Peak Design conditions) TIME OF SYSTEM PEAK 0 Aug 3 PM 178,000 Jan 1 AM Outside Air cfm/s ft • 0.23 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 26 OF 61 OF 61 OF 121 OF Outside Air 610 cfm Supply Fan Heating Coil 119 OF 2,800 cfm � ROOM 71 °F Return Fan 71 °F 72 OF 2,800 cfm COOLING SYSTEM PSYCHROMETICS Airstream Temperatures at Time of Cooling Peak 112/78°F 81/62°F 81/62°F 47/46°F Outside Air c 610 cfm Supply Fan Cooling Coil 49 / 47 °F 2,800 cfm 42.7 ��° ROOM • Return Fan 72/57°F 72/57°F 70/56°F } 2,800 cfm EnergyPro 6.5 by EnergySoft User Number: 6712 Run Code: 2015-06-04T16:47:32 /D: Page 16'of 20 ROOM LOAD SUMMARY 66,488 5,133 Project Name Patterson Residence 60,762 Date 6/4/2015 System Name. HVAC 1,'2111 Floor Area 2,614 ROOM LOAD,SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK Zone Name Room Name Mult. CFM [=Sensible Latent CFM Sensible Latent CFM Sensible residence altered residence 1 3,020 66,488 5,133 3,020 66,4881 5,1331 1,211 60,762 I� PAGE TOTAL TOTAL ' Total includes ventilation load for zonal systems. EnergyPro 6.5 by EnerqySoft User Number., 6712 RunCode: 2015-06-04T16.4 3,020 66,488 5,133 1,211 60,762 '3,0201 • 66,4881 5,133 1,'2111 60,7622 17 of 20 ( I—) ROOM HEATING PEAK LOADS Project Name Patterson Residence Date 6/4/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Floor Area 2,614..0 ft-- Indoor Dry Bulb Temperature 72 OF Time of Peak Jan 1 AM Outdoor Dry Bulb Temperature 26 °F Conduction Area X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X to Ceiling U -Value AT of X 46 X 46 X 46 X 46 X 46 .X 46 X X X X X X X X X X X X X X X X X X X X X X X X X Page Total / 60 AT Btu/hr = 9,499 = 22,665 = 13,106 = 462 = 970 = 6,112 = - = = _ = - _ _ = = = - = = = = - = = = _ = - = 52,814 Default 1978 to present 2,614.0 0.0790 R-13 Wall 4,830.6 0.1020 Existing Window 401.3 0.7100 Wood Door 20.1 0.5000 or LowE NON METAL .31..28 68.0 0.3100 Slab -On -Grade perim = 182:0 0.7300 Items shown with an asterisk (') denote conduction Infiltration:[ 1.00 X 1.064 Schedule Air Sensible Fraction through an interior surface X 2,614 X . Area another room 14.00 X - 0.266 Height ACH TOTAL HOURLY HEAT LOSS FOR ROOM 60,762 EnergyPro 6.5 by EnergySoft User Number.- 6712 Run Code: 2015-06-04T16:47:32 /D: Page 18 of 20 A RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name Date Patterson Residence 6/4/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Outdoor Dry Bulb Temperature 112 OF Floor Area 2,614.0 ftz Outdoor Wet Bulb Temperature 78 OF Indoor Dry Bulb Temperature 70 OF Outdoor Dailv Ranae: 34 OF Opaque Surfaces Orientation Area U -Factor CL -1-D' Default 1978 to present R-13 Wall R-13 Wall Wood Door R-13 Wall R-13 Wall 2,614. 0 1,168.8 X X X ' X X X X X X 0.0790 X X X X X X X X X 56.0 = = = = = = = = = 0.1020 23.0 1,293.9 0.1020 33.0 20.1 0:5000 33.0 1,111.2 0.1020 26.0 1,256.7 0.1020 33.0 36.6 36.5 15.8 36.6 36.5 21.0 36.6 36.5 21.0 Pag-- Total Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) Shaded Unshaded Fenestration Orientation Area GLF Area GLF ex 6x5.2 BED 2 new 6X10 ex 6x6 ex 6x7 ex 4X2.5 RR ex 3.5X4.5 KIT ex 3x7 DIN ex 3x7 DIN ex 3x7 DIN (N) (E) (E) (E) (S) (S) (S) (S) (S) 0.0 X X X X X X X X X 36.5 + + + + + + + + + 31.2 X X X X X X X } }_ 36.5 = = = = = _ = = 0.0 0.0 0.0 0.0 0.0 0.0 0.0 16.6 68.0 33.2 36.5 36.0 72.1 36.5 42.0 72.1 36.5 10.0 36.6 36.5 15.8 36.6 36.5 21.0 36.6 36.5 21.0 36.6 0.0 36.5 21.0 Btu/hr 11,564 2,742 4,355 332 2,947 4, 230 26,1 Btu/hr 1,138 2,259 2,595 3,028 .366 578 769 Page Total 12,270 Internal Gain Btu/hr Occupants 78 Occupants X 245 Btuh/occ. = 1,821 Equipment 2,614 Floor Area X 0.50 w/sgft Infiltration: 1.064 X 0.94 X 167.71 X 42 = 7,010 Air Sensible CFM ECA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 66,488 Latent Gain Btu/hr Occupants 7 8 Occupants X 1551 Btuh/occ. _ 1,216 Infiltration: 4,771 X 0.94 X 167.71. X 0.00523 = 3,917 Air Sensible CFM ELA AW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,216 I EneMyPro 6.5 by EnergySoft User Number: 6712 Run Code: 2015-06-04T16:47:32 ID: Page 19 of 20 1 i J RESIDENTIAL ROOM COOLING LOAD SUMMARY Project Name : Date Patterson Residence 6/4/2015 ROOM INFORMATION DESIGN CONDITIONS Room Name altered residence Outdoor Dry Bulb Temperature 112 OF Floor Area 2,614. 0 ft' Outdoor Wet Bulb Temperature' 78 OF Indoor Dry Bulb Temperature 70 OF I Outdoor Daily Range: 34 °F Opaque Surfaces Orientation Area U -Factor CLTD' Btu/hr, y X X _ X X _ X X _ X X - X X - X X _ X X - X X = X X _ Page Total 0 Items shown with an asterisk (') denote conduction through an interior surface to another room. 1. Cooling Load Temperature Difference (CLTD) . Shaded Unshac;ed Fenestration Orientation Area GLF Area GLF Btu/hr ex 5x8 DIN (IM 0.0 X 36.5 + 40.0 X 72.1 = 2,883 ex 5x8 DIN (lM 0.0 X 36.5 + 40.0 X 72.1 = 21883 ex 5x8 DIN 0.0 X 36.5 + 40.0 X 72.1 = 2,883 ex 3.5x5.5 RR (W) 0.0 X 36.5 + 19.3 X. 72.1 = 1,391 ex 3x8 BED -0.0 X 36.5 + 24.0 X 72.1 = 1,730 ex 6X7.8 BED 0.0 X 36.5 + 40.0 X 72.1 _ 2,883 X + h _ X X + x _ Page Total 14,65 Internal Gain Btu/hr Occupants ? 8 Occupants X 245 Btuh/occ. = 1,921 Equipment 2.614 Floor Area X 0.50 N,/sgft = 4,461 Infiltration: 1.064 X 0.94 X 167.71 X 42 = 7,010 Air Sensible CFM ELA AT TOTAL HOURLY SENSIBLE HEAT GAIN FOR ROOM 66,488 Latent Gain Btu/hr Occupants 78 Occupants X 155 Btuh/occ. Infiltration_: 4,771 X 0.94 X 167.71 X 0.00523 = +3,917 Air Sensible CFM ELA OW TOTAL HOURLY LATENT HEAT GAIN FOR ROOM 1,216 Ener Pro 6.5 by EnerqySoft User Number: 6712 Run Code: 2015-06-04T16:47:32 ID: Page 20 of 20