09-0329 (RER)P.O. BOX 1504
78-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
Application Number:
09-00000329
Property Address:
52245 VIA SAVONA
APN:
772-480-024- - -
Application description:
REMODEL - RESIDENTIAL
Property Zoning:
LOW DENSITY RESIDENTIAL
Application valuation:
44445
Ta�/ 4 4 Q"
Applicant: Amor Engineer:
BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed un r provisions of Chapter 9 (commencing with
Section 7000) of Division 3 of the Business an Professional Code, and my License is in full force and effect.
License las : B L' ense No.: 671203
DateV��Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
following reason (Sec. 7031.5, Business and Professions Code: Any city or county that requires a permit to
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).:
1 1 I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
and who does the work himself or herself through his or her own employees, provided that the
improvements are not intended or offered for sale. If, however, the building or improvement is sold within
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
improve for the purpose of sale.).
(_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed
pursuant to the Contractors' State License Law.).
( 1 I am exempt under Sec. , B.&P.C. for this reason
Date:
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the
work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's Name:
Lender's Address:
LQPERVIIT
Owner:
O'BRIEN MICHEAL & BILLIE JOE
52-245 VIA SAVONA
LA QUINTA, CA 92253
( O
Contractor:
PIERCE CORPORATION, ANDRE
P.O. BOX 3420
PALM DESERT, CA 92261-342
(760)346-3228
Lic. No.: 671203
VOICE (760) 777-7012
FAX (760) 777-7011
INSPECTIONS (760) 777-7153
Date: 7/17/09
fGii u .i 42C 2 L
CITY OF LA QUINTA
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
_ I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided
for by Section 3700 of the Labor Code, for the performance of the work for which this permit is
issued.
I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
Code, for the performance of the work for which this permit is issued. My workers' compensation
insurance carrier and policy number are:
Carrier DELOS INS CO Policy Number 02DKRM12003819
_ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
person in any manner so as to become subject to the workers' compensation laws of California,
and agree that, if I should beco a subject to th workers' compensation provisions of Section
3700ofthe Lab o Code,(II shal forth ' h com y with those provisions.
�e��.� Applicant: ./l
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
DOLLARS ($100,000) IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
conditions and restrictions set forth on this application.
1 . Each person upon whose behalf this application is made, each person at whose request and for
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is not commenced
within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject
permit to cancellation.
I certify that I have read this application and state that the above information is c rect. I agree to comply with all
city and county ordinances and state laws relating t wilding con ruction, and h reby authorize representatives
of this c unty to enter upon the above-mentioned pro rty fo s cti n rpos
i
Date Signature (Applicant or Agentl:
Application Number . . . . . 09-00000329
------ Structure Information 7773 SF RESIDENCE
-----
Other struct info . .
. . . CODE EDITION
2007
----------------------------------------------------------------------------
# BEDROOMS
.00
Permit . . .
BUILDING PERMIT
Additional desc
688 SF PATIO CONV TO LIVING
Permit Fee
382.00 Plan Check Fee
248.30
Issue Date . . . .
Valuation . .
. . 44445
Expiration Date
1/13/10
Qty Unit Charge
Per
Extension
BASE FEE
252.00
20.00 6.5000
----------------------------------------------------------------------------
THOU BLDG 25,001-50,000
130.00
Permit . . .
ELECT - ADD/ALT/REM
Additional desc . .
Permit Fee . . . .
34.50 Plan Check Fee
8.63
Issue Date . . . .
Valuation . .
. . 0
Expiration Date _
1/13/10
Qty Unit Charge
Per
Extension
BASE FEE
15.00
26.00 .7500
----------------------------------------------------------------------------
PER ELEC DEVICE/FIXTURE 1ST 20
19.50
Permit . .
MECHANICAL
Additional desc . .
Permit Fee . . . .
37.50 Plan Check Fee
9.38
Issue Date . . . .
Valuation . .
. . 0
Expiration Date . .
1/13/10
Qty Unit Charge
Per
Extension
BASE FEE
15.00
1.00 9.0000
EA MECH FURNACE <=100K
9.00
1.00 4.5000
EA MECH VENT INST/ DUCT ALT
4.50
1.00 9.0000
----------------------------------------------------------------------------
EA MECH B/C <=.3HP/100K BTU
9.00
Permit . . . . . . PLUMBING
Additional desc .
Permit Fee 21.00
Issue Date . . . .
Expiration Date . . 1/13/10
Qty Unit Charge Per
LQPERAIIT
Plan Check Fee . . 5.25
Valuation . . . . 0
Extension
Application Number . . . . . 09-00000329
Permit . . . . . . PLUMBING
Qty Unit Charge Per
Extension
BASE FEE
15.00
1.00 3.0000 EA PLB WATER INST/ALT/REP
3.00
1.00 3.0000 EA PLB FIXTURE DRAIN/VENT
REP/ALT
3.00
----------------------------------------------------------------------------
Special Notes and Comments
688 SF PATIO CONVERSION TO LIVING AREA.
DWELLING SQUARE FOOTAGE 1NCRF $P.n TO
7773 SF. 2007 CODES
----------------------------------------------------------------------------
Other Fees . . . . . . . . . BLDG STDS ADMIN (SB1473)
2.00
ENERGY REVIEW FEE
24.83
STRONG MOTION (SMI)
- RES
4.44
Fee summary Charged Paid Credited
-----------------------------------------------
----------
Due
Permit Fee Total 475.00 .00
.00
475.00
Plan Check Total 271.56 .00
.00
271.56
Other Fee Total 31.27 .00
.00
31.27
Grand Total 777.83 .00
.00
777.83
LQPERNIIT
c,
Bin # City of La Quinta
Building U Safety Division
P.O. Box 1504, 78-495 Calle Tampico
Permit # La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Trackir:g Sheet
Project Address:' 04444A A S4,16a„ Owner's Name: k411Wt LLIp dl
A. P. Number: 11,� . �� OZ,d, $ Address:
Legal Description: TP/0. Ig9A ,O. ;11156. City; ST, Zip:*,UAqd0 A, eog
Contractor: ,Wolff �jf 0j2(?p#A Telephone:
Address: 44.194 i9f P eA4Y0 j *A&V Project Description: GpOA (a,
City, ST, Zip: MAW WAP -t. ��i� GOf�i2%)KNEW -
Telephone: '' 6o .3%2$
State Lic. # : City Lic. #: � fi�
Arch., Engr., Designer:
Address: Z 511 liviloe )WO. 43114(w
City, ST, Zip4wi—, x 9x14&
Telephone:14- 4 4 - ZC1Q6 Constivation Type: Occupancy:
State Lic. #: 09 fug Project type (circle one): New Add'n Alter epair Demo
Name of Contact Person: r,7joil V1 Sq. Ft.: Stories: # Units:
Telephone # of Contact-Person:160 • M6 0gs K - 30 Estimated Value of Project:4 215.o
APPLICANT: DO NOT WRITE BELOW THIS LINE
# Submittal Req'd Recd TRACIUNG PERMIT FEES
Plan Sets Plan Check submitted 3 Item Amount
Structural Calcs. Reviewed, ready for corrections Plan Check Deposit
Truss Calcs. Called Contact Person Plan Cheek Ealance
Energy .Calcs. Plans ' iiccked up _ -Construction_ -
FIQOd plain plan Plans resubmitted . Mechanical -
Grading. plan 2'" Review, ready for correctionsfissue Electrical
Subcontactor. List Called'Contact Person 1 1 Plumbing
Grant Deed Plans. picked up S.M.I.
H.O.A. Approval Plans resubmitted Grading
IN HOUSE:- '"Review, ready for corrections/issue Developer Impact Fee
Planning Approval Called Contact Person A.I.P.P.
Pub. Wks. Appr Date of permit issue
School Fees
A1C3ts '�/7 tfeSA- rta`c�
rho �n� �)r,)
Total Permit Fees
a 4
Coachella Valley Unified School District
83-733 Avenue 55, Thermal, CA 92274
(760) 398-5909 — Fax (760) 398-1224
This Box For District Use Only
DEVELOPER FEES PAID
AREA
AMOUNT
LEVEL ONE AMOUNT:
LEVEL Two AMOUNT:
MmcaTtON AMOUNT:
COMM/M. AMOUNT:
DATE:
RECEIPT:
CHECK #:
INITIALS:
CERTIFICATE OF COMPLIANCE
(California Education Code 17620)
Project Name: Michael Obrien Date: 08/14/09
Owner's Name: Michael Obrien Phone No. • (760) 880-0162
Project Address: 52-245 Via Savona, La Quinta, CA
Project Description: Covered Patio Conversion Living Area of Existing SFD
APN: 777-140-002 Tract #: Lot #'s: 118
Type of Development: Residential XXL Commercial Industrial
Total Square Feet of Building Area: 688 sq. ft.
Certification of Applicant/Owners: The person signing certifies that the above information is corre-.t and makes this statement under
penalty of perjury and further represents that he/she is authorized to sign on behalf offhe owner/developer.
Dated: 08/14/09
Signature:
•s*:ssss*sssssssss*s•�s*s*sssssss*•*s*ssss.#*:sss*ss«s�#ss**sss#*ss�vss
SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN
ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE)
Education Code Gov. Code Project Agreement Existing Not Subject to Fee
17620 65995 Approval Prior to 1/1/87 Requirement
Total Square Footage 688 Sg, Ft.
Amount per Sq.Ft. $ 2.97
Amount Collected $ 2,043.36
Building Permit Application Completed: Yes/No
By: Jamie T. Brown, Asst. Supt., Business Services
Certificate issued by: Leticia C. Torres, Facilities Analyst
Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires s Di-trict provide (1) a written notice to the
project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these
Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice 'shall serve to
advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other
requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as terein set forth, whether payable at this
time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts oo the date hereof. This Certificate of
Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up
to three (3) such extensions may be granted.
LT:c/mydocs/devfees/certificate of compliance form tablesTO USE.doc 9/11/08
i
TITLE 24 REPORT
Title 24 Report for:
Lot 118
Via Savona * The Hideaway
La Quinta, CA 92253
Project Designer:
BBG Architects
20-371 Irvin Ave., Suite 120
Santa Ana Heights, CA 92707-5651
(714) 434-2506
Report Prepared By:
Micah Combs
CM Energy Consulting
P.O. Box 4655
Palm Desert, CA 92261
(760) 449-1308 F
cz' i Y r LA QUINTA
� i UILDING & SAFETY DEPT.
APPROVED
FON CONSTRUCTION
Job Number: ; c�,arE
h Y*'Itq
Date:
6/22/2009
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This.pP
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy E
This program developed by EnergySoft, LLC - www.energysoft.com.
i has approo d is
a\andar
EnergyPro 4.4 by EnergySoft Job Number: User Qmber103
: 74
\I�► 1 sw D' f'1 .n
L'—'D < < L—&--
TABLE OF CONTENTS
Cover Page
Table of Contents
Form CF -1 R Certificate of Compliance
Form MF -1 R Mandatory Measures Summary
Form WS -5R Residential Kitchen Lighting
1
2
3
12
14
EnergyPro 4.4 by EnergySoft Job Number: User Number: 7403
Certificate Of Compliance : Residential
(Part 1 of 4) CF -1 R
Lot 118
Project Title
r7i22i20ng
Date
via gavona * The Hideaway
I a Ql inta
Project Address
Building Permit #
LA, Ener C In�ltinn
(760) 449-1308
Documentati Author
Telephone
plan Check/Date
Fnern
CompliNrice Method
CA
Cute lone 19
Climate Zone
Field Check/Date
TDV
Standard
Proposed Compliance
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
1.76
2.26
-0.51
Space Cooling
57.59
52.24
5.34
Fans
8.18
9.81
-1.63
Domestic Hot Water
3.52
3.96
-0.44
Pumps
0.00
0.07
-0.07
Totals
71.04
68.35
2.69
Percent better than Standard:
Building Type: iX� Single Family ❑ Addition
❑ Multi Family ❑ Existing + Add/Alt
Building Front Orientation: (E) 90 deg
Fuel Type: Natural Gas
Fenestration:
Area: 1,390 ft2 Avg. U: 0.37
Ratio: 19.1% Avg. SHGC: 0.32
BUILDING ZONE INFORMATION
Zone Name Floor Area Volume
HVAC #1 1,._x66 17 g
HVAr 99 1 744 17 4
HVAC #3 1 574 ?5"7
HVAC #4 1 326 13_?
OPAQUE SURFACES Insulation Act.
Type Frame Area LI -Fac. Cay. Cont. Azm. Tilt
Rnnf Wppxl 1 n55 n nr.1 R_lq -n n _0 n
Wall Wnnd 599 0110 R-11 R -nn n 90
Wall W and 63 o ] 1Jl 11 SIL _ILII
Wall Wnnd 214 o 11 n R-11 R -n n _90 An
Wall Wnnd 309 0110 R-11 R -n n 1 Rn _90
Wall WnrA 946 n_11n R_11 R -nn 97n gn
wall— Wnnd— 3R —n 11n R_11 R-0 0 97n An
Rnnf Wnrkl 1�334 nn51 R_lq R -nn n n
Wall Wnnd 130 0110 R_11 R -nn jj 90
Wall Wnnd 137 Q110 R_11 R-n_n gn 90
Wall Wnnd 9nn 0110 R_11 R_n0 An 90
wall WnnH inn o11n P-1 1 R-()0 ign gn
Wall Wnrxi 90 n 110 R_11 R-0.0 1Rn gn
Wall Wnnd 1R nun R_11 R-00 P70 gn
Rnnf Wnnd 1 574 n 051 R_1q R-0 n 0 n
Wall Wnod 111 n11n R_11 R -Q0 0 go
Wall Woori— 36 _0.110. R_11 R -n n n gn
nnor Nnna 94 n 600 Nnna R -n n a gn
Wal1 Wnnd 174 011n R_11 R -n n gn 90
Wall Wnnd 556 n_11n R_11 R -nn 180 qn
Wall Wond 60 0110 R_11 R -n n 1R0 gn
Wall wood 140 0110 R_11 R -n n P70 90
Rnnf Wnnd 1,396 0051 R-19 R-0 n _n
wall Wood— 364 n110 R_11 R -nn 0 gn
Wall WoWo—oad— 34R n11aR-11 R -nn 90LgD
Total Conditioned Floor Area:
Existing Floor Area:
Raised Floor Area:
Slab on Grade Area:
Average Ceiling Height:
Number of Dwelling Units:
Number of Stories:
# of Thermostat
Units Zone Type Type
n 97 rond6tionAd Sethark
X24 rnndifinned Sathark
022_ Conditioned Sethack
018 Conditioned Setback
7,294 ft2
n/a ft2
0 ft2
5,968 ft2
10.0 ft
1.00
Vent
Hgt. Area
n/a
—2 n/a
_2 n/a
_2 n/a
Gains Condition
Y / N Status JA IV Reference Location / Comments
I EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:3 of 14 1
Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R
Lot 118612/
009
Project Title
Date
gavnna * The Hideaway
I a Q, junta
_V_ia
Project Address
Building Permit #
Fn rnv Cnnsiiltinn
(760) 449-1308
DocumentatiW Author
Telephone
Plan Check/Date
FnernyPrn
Compli1rice Method
CA
Climate Zone 15
Climate Zone
Field Check/Date
TDV
Standard
Proposed
Compliance
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
1.76
2.26
-0.51
Space Cooling
57.59
52.24
5.34
Fans
8.18
9.81
-1.63
Domestic Hot Water
3.52
3.96
-0.44
Pumps
0.00
0.07
-0.07
Totals
71.04
68.35
2.69
Percent better than Standard:
Building Type: (J Single Family
❑ Multi Family
Building Front Orientation:
Fuel Type:
Fenestration:
❑ Addition
❑ Existing + Add/Alt
(E) 90 deg
Natural Gas
Area: 1,390 ft' Avg. U: 0.37
Ratio: 19.1% Avg. SHGC: 0.32
BUILDING ZONE INFORMATION
Zone Name
Total Conditioned Floor Area
Existing Floor Area:
Raised Floor Area:
Slab on Grade Area:
Average Ceiling Height:
Number of Dwelling Units:
Number of Stories:
# of
Floor Area Volume Units Zone Tvr)e
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay. Cont. Azm. Tilt
Wall Wnrwl 471 0 110 R_11 _n n ISO _90
Wall Wnnrl ;)Rg n 11d R_11 R -n n 270 9p
Rnnf Wnnrl 674 n 051 _E19 R -n 0
Wall Wood 70 _ 0110 P-1 113-0 n 0 90
Wall W nnrl 75 n11n R-11 R -n n 1 Rn Ap
Wall Wnnrl IRR 0110 R_11 R-n_n P70 Ap
Gains Condition
Y / N Status JA IV Reference
7,294
n/a
5,968
10.0
1.00
ft2
ft2
ft2
ft2
ft
Thermostat Vent
Type Hgt. Area
Setback— n/a
Location / Comments
i EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:4 of 14 1
Certificate Of Compliance :Residential (Part 2 of 4) CF -1 R
Lot 118 6/22/2009
Project Title Date
FENESTRATION SURFACES
True Cond.
# Type Area U -Factor' SHGC2 Azm. Tilt Stat. Glazing Type
Location/
Comments
1
2
Window
Window
Right
Right
(N) in n 018 NFRC n.o NFRC _0 i_ New Siarra Panifir. Clad (I n/F) (mnt
(N) 10.0 0.380 NFRC 0_30 NFRC 0 90 New 9(6k% Pacific Clad (Lo/E) Cmnt
70NF #1
ZONE #1
3
Window
Right
(N) 20.0 0.390 NFRC 0_28 NFRC 0 90 New W Pacific Clad (Lo/E) Frnch Dr ZONE #1
4
Window
Right
(N) 48.0 0.350 NFRC 0_38 NFRC 0 90 New Sierra Pacific Clad (Lo/E) Fxd Wdw ZONE #1
5
Window
Right
(N) 10.0 0.380 NFRC 0_30 NFRC 0 90 New Sierra Pacific Clad (Lo/E) Cmni
ZONE #1
-6-
Window
Right
(y) 10.0 0.380 NFRC 0_30 NFRC 1E) Cmnt
ZONE #1
Z
Window
Front
(E) 20.0 035350 NFRO_0 3 NFRC 90_ qQ New Pacific Clad ( o/ ) Fxd Wdw
ZONE #1
8
Window
Front
(E) 40.0 0.390 NFRC 0_28 NFRC 90 90 New Sierra Pacific Clad (Lo/E) Frnch Dr ZONE #1
3
Window
Front
(E) 20.0 0.350 NFRC 0"3g NFRC _90_ qQ New Sierra Pacific Clad (Lo/E) Fxd Wdw
ZONE #1
-M
Window
Front
(E) 48.0 0.350 NFRC 0.3g NFRC 90_ -0-New Sierra Pacific Clad (Lo/E) Fxd Wdw
ZONE #1
11
Window
Left
(S) 40.0 0.390 NFRC 0.28 NFRC 180 90 New Sierra Pacific Clad (o/E) Frnch
Dr ZONE #1
12
Window
Left
(S) 6.0 0.380 NFRC 0_30 NFR 180 90 New Sierra Pacific Clad (Lo/E) Cmnt
ZONE #1
13.
iA
Window
Window
I eft
Left
(S) F; 0_ 0.380 NFRC 00.30 NFRC 180 _Q- New a Pacific Clad (er) Cmnt
(S) 6.0 0.380 NFRC 0_30 NFRC 180 90 New 481d Pacific Clad (LoE Cmnt
ZONE #1
ZONE #1
15
Window
Rear
(W) 6.0 0.380 NFRC 0_30 NFRC 270 90 New 99% Pacific Clad Lo/E) Cmnt
ZONE #1
_a
Window
Rear
(W) 18.0 0.380 NFRC 0.30 NFRC 270 90 New Wa Pacific Clad (Lo/E) Cmnt
ZONE #1
17
Window
Rear
(W) 40.0 0.390 NFRC 0_28 NFgC 270 90 New gid% Pacific Clad (Lo/E) Frnch Dr ZONE #1
1$
Window
Rear
(W) 16.0 0.410 NFRC 0_32 NFRC 270 90 New Pozzi Clad (Lo/E) Fxd Wdw
ZONE #1
-M
Window
Rear
(W) 16.0 0.410 NFRO 032 NFRC 270 PIC) New Pozzi Clad (Lo/E) Fxd Wdw
ZONE #1
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B.
INTERIOR AND EXTERIOR SHADING
Area Thick. Heat Inside
Window Overhang Left Fin Right Fin
#
Exterior Shade Type
SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len. Hgt. Dist. Len. Hgt.
1
Bug Screen
0.76
2
Bug Screen
0.76 _
3
Bug Screen
0.76
4
Bug Screen
0.76
5
Bug Screen
0.76
6
Bug Screen
0.76
7
Bug Screen
0.76 _
8
Bug Screen
0.76
9
Bug Screen
_
0.76
10
Bug Screen
0.76
11
Bug Screen
0.76
12
Bug Screen
_
0.76
13
Bug Screen
0.76
14
Bug Screen
_
0.76
15
Bug Screen
0.76
16
Bug Screen
0.76
17
Bug Screen
_
0.76
18
Bug Screen
0.76
19
Bug Screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
Run Initiation Time: 06/22/09 09.34.44 Run Code- 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:5 of 14
Area Thick. Heat Inside
Condition
Location/
Type
(sf)
(in.) Cap. Cond. R -Val.
JA IV Reference
Status
Comments
Tile in Mortar
390
0.75 24 0_67 0
n/a
New
ZONE #1 / Interior Mass
Concrete, Heavyweight
390
4.00 28 0_98 0
26-A1
New
ZONE #1 / Slab on Grade
Concrete, Heavyweight
1.576
4.00 28 0_98 2
26-A1
New
ZONE #1 / Slab on Grade
Tile in Mortar
340
0.75 24 0_67 0
n/a
New
ZONE #2 / Interior Mass
Concrete, Heavyweight
340
4.00 28 0_98 0
26-A1
New
ZONE #2 / Slab on Grade
PERIMETER LOSSES
Insulation
Condition
Location/
Type
Length
R -Val. Location
JA IV Reference
Status
Comments
Slab Perimeter
193
None No Insulation
26-A1
New
ZONE #1
Slab Perimeter
54
None No Insulation
26-A1
New
ZONE #2
Slab Perimeter
118
None No Insulation
26-A1
New
ZONE #3
Slab Perimeter
49
None No Insulation
26-A1
New
ZONE #5
Run Initiation Time: 06/22/09 09.34.44 Run Code- 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:5 of 14
Certificate Of Compliance :Residential (Part 2 of 4) CF -1 R
Lot 118 6/22/2009
Project Title Date
FENESTRATION SURFACES
True Cond.
# Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type
Location/
Comments
20.
21
Windnw
Window
Right
Front
(N) 1120 nn n .36 NERC ngNFRC �_ -9L Naw Sierra Pnrifir. Clad (I n/F) siring
(El 100.0 0.360 NFRC 0_32 NFRC 90 90 New Sierra Pacific Clad (Lo/E) Sldng
Dr ZQNF #9
Dr ZONE #2
22
Window
Front
(E) 28.0 0.530 116-A 0_53 116-B 90 90 New Double Wood Default (Clear)
ZONE #2
23
Window
Left
(S) 10.0 0.380 NFRC 0_30 NFRC 180 90 New Sierra Pacific Clad Lo/E) Cmnt
ZONE #2
24
Window
Left
(S) 10.0 0_380 NFRC 0_30 N F R -C 180 90 New Pacific Clad (Lo/E) Cmnt
ZONE #2
25
Window
Rear
(W) 80.0 0_360 NFRC 0_32 NFRC 270 90 New (Lo/E) Sldng
Dr ZONE #2
2a
Window
Front
(E) 8.0 0y380 NFRC 03 NFRC qQ _gQ New Sierra Pacific Clad (Lo/E) Cmnt
ZONE #3
27
Window
Front
(E) 18.0 0.380 NFRC 0_30 NFRC 90 90 New W6K%Pacific Clad Lo/E) Cmnt
ZONE #3
2$
_Window
Front
(Fa 18.0 0_380 NFRC 03 NFRG 90 qQ New Pa .. .lad (Lo/ ) Cmnt
ZONE #3
2a
_Window
Front
(F) 12.0 0_350 NFRC 0038 NFRC 90 qn New W4ffi Pacific Clad (Lo/E) Fxd Wdw
ZONE #3
M
Window
Left
(S) 19.0 0_390 NFRC 0_28 NFRC 180 90 New Sierra Pacific Clad (Lo/E) Frnch
Dr ZONE #3
31
Window
Left
(S) 12.5 0_380 NFRC 0_30 NFRC 180 90 New Sierra Pacific Clad (Lo/E) Cmnt
ZONE #3
22
33
Window
Window
I eft
Left
(S) 15.0 X50 NFRC 03 NFRC 180 q0_ New Pacific Clad (I n/E) Fxd Wdw_ZONE #3
(S) 6.0 0_350 NFRC 0_38 NFRC 180 90 New Sierra Pacific Clad (Lo/E) Fxd Wdw ZONE #3
34
Window
Rear
(W) 50.0 0.390 NFRC 0_28 NFRC 270 90 New Sierra Pacific Clad (Lo/E) Frnch
Dr ZONE #3
25
Window
Rear
(W) 25.0 0.350 NFRC 0_38 NFRC 270 90 New Sierra Pacific Clad (Lo/E) Fxd Wdw ZONE #3
3
Window
Rear
(W) 25.0 0.350 NFRC 0_38 NFRC 270 90 New Sierra Pacific Clad (Lo/E) Fxd Wdw ZONE #3
2Z
Window
Right
(N) 10.0 0.380 NFRC 0_30 NFRC 0 90 New Sierra Pacific Clad (Lo/E) Cmnt
ZONE #4
-M
Window
Right
()y) 13.5 0.380 NFRC 03 NFRC 0 qQ New §W(A% Pacific Clad (J o/E) Cmnt
ZONE #4
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1 IN.w
INTERIOR AND EXTERIOR SHADING
Bug
Screen
Window Overhang Left Fin Right Fin
#
Exterior Shade Type
SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len. Hgt. Dist. Len. Hgt.
20
Bug Screen
0.76
21
Bug Screen
0.76 _
22
Bug Screen
0.76
23
Bug Screen
0.76
24
Bug Screen
0.76
25
Bug Screen
0.76 _
26
Bug Screen
0.76
27
Bug Screen
0.76
28
Bug Screen
0.76
29
Bug Screen
0.76
30
Bug Screen
0.76
31
Bug Screen
0.76
32
Bug Screen
0.76
33
Bug Screen
0.76
34
Bug Screen
_
0.76
35
Bug
Screen
0.76
36
Bug
Screen
0.76
37
Bug
Screen
0.76
38
Bug
Screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
Run Initiation Time: 06/22/09 09:34:44 Run Code: 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:6 of 14
Area Thick. Heat
Inside
Condition
Location/
Type
(sf)
(in.)
Cap.
Cond. R -Val.
JA IV Reference
Status
Comments
Concrete, Heavyweight
1.409
4.00
28
0_98 2
26-A1
New
ZONE #2 / Slab on Grade
Tile in Mortar
310
0.75
24
0_67 0
n/a
New
ZONE #3 / Interior Mass
Concrete, Heavyweight
310
4.00
28
0_98 0
26-A1
New
ZONE #3 / Slab on Grade
Concrete, Heavyweight
1.264
4.00
28
0_98 2
26-A1
New
ZONE #3 / Slab on Grade
Tile in Mortar
260
0.75
24
0_67 0
n/a
New
ZONE #4 / Interior Mass
PERIMETER LOSSES
Insulation
Condition
Location/
Type
Length
R -Val.
Location
JA IV Reference
Status
Comments
Run Initiation Time: 06/22/09 09:34:44 Run Code: 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:6 of 14
Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R
Lot 118 6/22/2009
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U-Factorl SHGCZ Azm. Tilt Stat. Glazing Type Comments
M
40
Windnw
Window
Frnnt
Front
(F)
(E)
20_0 n_39n NFRC 1 9 NFRC qQ_ An New Siarra Parifir. Clad (I n/F) Frnch Or ZQNF #4
4.5 0.380 NFRC 0_30 NFRC 90 90 New Sierra Pacific Clad Lo/E) Cmnt ZONE #4
41
Window
Front
(E)
4.5 0.380 NFRC 0_30 NFRC 90 90 New Pacific Clad Lo/E) Cmnt ZONE #4
42
Window
Front
(E)
4.5 0.380 NFRC 0.30 NFRC 90 90 New 96 Pacific Clad Lo/E) Cmnt ZONE #4
43_
Window
Front
(E)
6.0 0.38 NFRC 0_30 NFRC 90 90 New WA Pacific Clad (Lo/E) Crnnt ZONE #4
44
Window
Left
(S)
10.0 0_380 NFRC 0_30 NFRC. 180 90 New Pacific Clad (Lo/E) Cmnt ZONE #4
45.
Window
Left
(S)
6.3 038 NFRC 01 NFRC 180 qQ_ New Pacific Clad (Lo/F) Cmnt ZONE #4
46
Window
Rear
(W)
8.0 0.380 NFRC 0.30 NFRC 270 90 New 9Oft Pacific Clad Lo/E) Cmnt ZONE #4
4Z
Window
Rear
(W)
10.0 0=380 NFRC 0_30 NFRC 270 510 New Pacific Clad ( o/E) Cmnt ZONE #4
48_
Window
Rear
OyJ
40.0 0=390 NFRC 0_28 NFRC 270 gQ_New WO& Pacific Clad (Lo/F) Frnch Dr ZONE #4
4q
Window
Rear
-(WI
40.0 0_390 NFRC 0_28 NFRC 270 90 New Sierra Pacific Clad-(L(21E) Frnch Dr ZONE #4
50
Window
Left
(S)
48.0 0_360 NFRC 0_32 NFRC 180 90 New Sierra Pacific Clad (Lo/E) Sldng Dr ZONE #5
51
Window
Rear
(W)
227.5-50360 NFRC 032 NFRC 270 _g.Q- New Sierra Pacific Clad (I o/F) SIdnB Dr ZONF #5
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B.
INTERIOR AND EXTERIOR SHADING
Area Thick. Heat
Inside
Window Overhang Left Fin Right Fin
#
Exterior Shade Type
SHGC Hgt. Wd. Len. Hgt. LExt. RExt. Dist. Len. Hgt. Dist. Len. Hgt.
39
Bug Screen
0.76
40
Bug Screen
0.76
41
Bug Screen
0.76 _
42
Bug Screen
0.76
43
Bug Screen
0.76
44
Bug Screen
0.76 _
45
Bug Screen
0.76
46
Bug Screen
0.76
47
Bug Screen
0.76 _
48
Bug Screen
0.76
49
Bug Screen
0.76
50
Bug Screen
0.76
51
Bug Screen
0.76
THERMAL MASS FOR HIGH MASS DESIGN
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Time: 06/22/09 09.34.44 Run Code: 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:7 of 14
Area Thick. Heat
Inside
Condition
Location/
Type
(sf)
(in.)
Cap. Cond. R -Val. JA IV Reference
Status
Comments
Tile in Mortar
679
0.75
24
0_67 0 n/a
New
ZONE #5 / Interior Mass
Concrete, Heavyweight
612
4.00
28
0_98 0 26-A1
New
ZONE #5 / Slab on Grade
Concrete, Heavyweight
67
4.00
28
0_98 2 26-A1
New
ZONE #5 / Slab on Grade
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Time: 06/22/09 09.34.44 Run Code: 1245688484
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:7 of 14
A -ti
Certificate Of Compliance : Residential (Part 3 of 4) CF -1 R
Lot 118
Tank
Energy
Duct
Duct Condition
6/22/2009
Project Title
Heating
Cooling
Location
Date
Tested?
HVAC SYSTEMS
Ducted
Ducted
Attic
8.0 New
No
HVAC #2
Heating
Minimum
Cooling
Minimum
Condition Thermostat
Location
Type
Eff
Type
Eff
Status Type
HVAC #1
Central Furnace
92% AFUE
Split Air Conditioner
15.0 SEER
New Setback
HVAC #2
Central Furnace
92% AFUE
Split Air Conditioner
15.0 SEER
New Setback
HVAC #3
Central Furnace
92% AFUE
Split Air Conditioner
15.0 SEER
New Setback
HVAC DISTRIBUTION
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS Rated
Tank
Energy
Duct
Duct Condition
Ducts
Location
Heating
Cooling
Location
R -Value Status
Tested?
HVAC #1
Ducted
Ducted
Attic
8.0 New
No
HVAC #2
Ducted
Ducted
Attic
8.0 New
No
HVAC #3
Ducted
Ducted
Attic
8.0 New
No
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS Rated
Tank
Energy
Tank Insul.
Water Heater # in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext.
Rheem HE80-199 Large Gas Recirc/Time+Temp 2 199,000
78
New 0.92
1.17% 0.0
Multi -Family Central Water Heating Details
Hot Water Pump Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (p1r Busi ess8A Professions Code)
Name: V� t7 _ W
Title/Firm: BBG Architects
Address: 20-371 Irvin Ave., Suite 120
Santa Ana Hei hts CA 707-5651
Telephone: 14 4 4-2 O6 I I Lic. #:
(signature) W$ (date)
Enforcement Agency
Name:
Title/Firm:
Address:
Telephone:
(signature) (date)
Documentation Author
Name: Micah Combs
Title/Firm: CM Energy Consulting
Address: P.O. Box 4655
Palm Desert, CA 92261
Tel phon 760 449-1308
774 -
(sign (date)
Certificate Of Compliance : Residential (Part 3 of 4) CF -1 R
Lot 118
Duct Condition
Ducts
Location Heating Cooling Location
R -Value Status
6/22/2009
Project Title
8.0 New
No
HVAC #5 Ducted Ducted Attic
Date
No
HVAC SYSTEMS
Heating
Minimum
Cooling
Minimum
Condition Thermostat
Location
Type
Eff
Type
Eff
Status Type
HVAC #4
Central Furnace
92% AFUE
Split Air Conditioner
15.0 SEER
New Setback
HVAC #5
Central Furnace
80% AFUE
Split Air Conditioner
13.0 SEER
New Setback
HVAC DISTRIBUTION
Duct
Duct Condition
Ducts
Location Heating Cooling Location
R -Value Status
Tested?
HVAC #4 Ducted Ducted Attic
8.0 New
No
HVAC #5 Ducted Ducted Attic
8.0 New
No
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS Rated Tank Energy Tank Insul.
Water Heater # in Input Cap. Condition Factor Standby R -Value
System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext.
Multi -Family Central Water Heating Details
Hot Water Pump Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
REMARKS
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (peBusing
Name: tCX-IIVI V ss & rofessions Code)
�IIr�L�
Title/Firm: BBG Architects
Address: 20-371 Irvin Ave.. Suite 120
Santa Ana Hei hts CA 2707-5651
Telephone: 714 *-150q 50 Lic. #:
(signature) (date)
Enforcement Agency
Name:
Title/Firm:
Address:
Telephone:
(signature) (date)
Documentation Author
Name: Micah Combs
Title/Firm: CM Energy Consulting
Address: P.O. Box 4655
Palm Desert, CA 92261
Telephone: 760 449-1308
-7'
(sign (date) '
Certificate Of Compliance :Residential (Part 4 of 4) CF -1 R
Project Title
6/22/2009
Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local
enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies
based on the adequacy of the special justification and documentation submitted. I Plan I Field
The Roof "R-38 Roof (R.38.2x14.16)" includes a Radiant Barrier.
The DHW System "Rheem HE80-199"
is a Large Gas water heater with Pilot Loss = 0 btuh.
HIGH MASS Design - Thermal Mass:
390 sqft Tile in Mortar Interior Mass, 0.75" thick at Master Suite and Guest Suite
HIGH MASS Design - Thermal Mass:
390 sqft Exposed Slab Floor, 4.00" thick at Master Suite and Guest Suite
HIGH MASS Design - Thermal Mass:
1576 sqft Covered Slab Floer, 4.00" thick at Master Suite and Guest Suite
HIGH MASS Design - Thermal Mass:
340 sqft Tile in Mortar Interior Mass, 0.75' thick at Living Area
HIGH MASS Design - Thermal Mass:
340 sqft Exposed Slab Floor, 4.00" thick at Living Area
HIGH MASS Design - Thermal Mass: 1409 scift Covered Slab Floor, 4.00" thick at Living Area
HIGH MASS Design - Thermal Mass: 310 sqft Tile in Mortar Interior Mass, 0.75' thick at Guest Bedroom and Kitchen
HIGH MASS Design - Thermal Mass:
310 sgft Exposed Slab Floor, 4.00" thick at Guest Bedroom and Kitchen
HIGH MASS Design - Thermal Mass:
1264 sqft Covered Slab Floor, 4.00" thick at Guest Bedroom and Kitchen
HIGH MASS Design - Thermal Mass:
260 sgft Tile in Mortar Interior Mass, 0.75' thick at Upstairs Guest Suite
HIGH MASS Design - Thermal Mass:
679 sgft Tile in Mortar Interior Mass, 0.75' thick at Loggia
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a
HERS provider using approved testing and/or verification methods. Plan Field
The HVAC System "HVAC #1" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion
Valve.
The Cooling System "MAYTAG PSA4BF/ PGF1 TC (5 Ton)" includes credit for a 13.0 EER Condenser.
The HVAC System "HVAC #2" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion
Valve.
The Cooling System "MAYTAG PSA4BF / PGFITC (5 Ton)" includes credit for a 13.0 EER Condenser.
The HVAC System "HVAC #3" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion
Valve.
The Cooling System "MAYTAG PSA4BF / PGF1 TC (5 Ton)' includes credit for a 13.0 EER Condenser.
The HVAC System "HVAC #4" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion
Valve.
The Cooling System "MAYTAG PSA4BF / PGF1 TC (5 Ton)' includes credit for a 13.0 EER Condenser.
The HVAC System "HVAC #5" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion
Valve.
The Cooling System "MAYTAG PSA1 BD / PGC1 RA (2 Ton)' includes credit for a 11.0 EER Condenser.
L EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page: 10 of 14 1
Certificate Of Compliance :Residential (Part 4 of 4) CF -1 R
Lot 118 6/22/2009
Project Title Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local
enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies
)asea on the aaequacy of the special fustmcauon ana aocumentauon submittea.
HIGH MASS Design - Thermal Mass: 612 sqft Exposed Slab Floor, 4.00" thick at Loggia
HIGH MASS Desiqn - Thermal Mass: 67 soft Covered Slab Floor, 4.00" thick at Loaaia
Plan I Field
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a
HERS provider using approved testing and/or verification methods. Plan Field
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Paae:11 of 14 1
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the
ENFORCE -
permit application documentation.
N/A
DESIGNER
MENT
Building Envelope Measures
*§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
Q
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
•§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
,§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor.
❑
❑
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
1. Masonry and factory -built fireplaces have:
a. closable metal or glass door covering the entire opening of the firebox
❑
❑X
❑
b. outside air intake with damper and control, flue damper and control
❑
❑X
❑
2. No continuous burning gas pilot lights allowed.
❑
0
❑
§ 150(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include
❑
FX1
❑
CF -6R Form:
§ 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑X
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
❑
❑X
❑
Coefficient (SHGC), and infiltration certification.
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑X
❑
Space Conditioning, Water Heating and Plumbing System Measures
§ 110.13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑X
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑X
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑X
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number:
Page: 12 of 14
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE -
applicable. N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑X ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181 A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or
tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed ❑ ❑X ❑
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support
platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions
in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑ ® ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers.
❑ ® ❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑ ® ❑
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑ ® ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ ® ❑
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
❑ ❑X ❑
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ® ❑
b. Cover for outdoor pools or outdoor spas.
❑ ® ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑X ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ® ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ® ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Wafts or greater are electric
and have an output frequency no less than 20 kHz.
§ 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ ❑ ❑
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑ ❑X ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑X ❑
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are controlled
❑ ❑X ❑
by an occupant sensor that complies with Section 119(d) that does not turn on automatically or have an always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑X ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ a ❑
same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 680
locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d).
EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number:
Page: 13 of 14
Residential Kitchen Liahting Worksheet WS -5R
Lot 118 6/22/2009
Project Title Date
At least 50%of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires
as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately.
Kitchell Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens.
High Efficacy
Luminaire Type High Efficacy? Watts Quantity Watts Other Watts
(1) 28w Compact Fluorescent Quad 2 Pin Yes X No 34.0 x 13 = 442 or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No 11 x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Total A: 442 B: 0
COMPLIES IF A i B YES ® NO ❑
L_ EnergyPro 4.4 by EnergySoft User Number: 7403 Job Number: Page:14 of 14 1