Loading...
06-1598 (SFD)P.O. BOX 1504 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Application Number: Property Address: APN: Application description: Property Zoning: Application valuation: Applicant:. 06-00001598 52551 VIA SAVONA 772-4.10-999-9 -298943- DWELLING - SINGLE FAMILY LOW DENSITY RESIDENTIAL 562737 T,i&t 4 4 Q" BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Owner: BRIAN & DOREEN LONG 116611 SASKATEWAN DR NW DETACHED EDMONTON AB TGC2B5 Architect or Engineer: -------------------------------------------------- LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Busin s a Profession F�Co�1e, and my License is in full force and effect. License Class, B Elise No.: 683969 e: ontrac r: OWNER -BUILDER DECLARATION I hereby affirm under penal f pe at I am exempt from the Contractor's State License Law for the following reason (Sec. 7031.5, Bu in s and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: 1 _) 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). (_ 1 I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). (_ 1 I am exempt under Sec. , B.&P.C. for this reason Date: Owner: CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPERMIT VOICE (760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 7/19/06 Contractor: D CAL TECH DEVELOPMENT CORP 78150 CALLE TAMPICO STE 205 JUL 2 0 2006 LA QUINTA, CA 92253 (760)771-3738 Lic. No.: 683969 CITY OF LA QUINTA ----------------------------------------------- WORKER'S COMPENSATION COMPENSATION DECLARATION I hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. My workers' compensation insurance carrier and policy number are: Carrier STATE FUND Policy Number 1768839 I certify that, in the performance of the work for w ch this permit is issued, 1 shall not employ any person in any manner so as to become subjec the workers' compensation laws of California, and agree that, if I should b ome subject to e w rkers' compensation provisions of Section 3700 of the La Code, 2allJgrthwith mply, ith those provisions. WARNAVG: FAILURE TO SE UR 0 R COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL SUBJECT AN EMPLOYER T IMI 'MW AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITI THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of wo k for 180 days will subject permit to cancellation. I certify that I have read this application and state that the above information is co t. I agree to comply with all c n city and county ordinances and state laws relating to building struction, and b uthorize representatives of this /o�srr upon th"ove-mentioned propert o op�{io�p)pur s (Applicant or Application Number . . . . . 06-00001598 Permit . . . BUILDING PERMIT Additional desc . Permit Fee . . . . 2228.50 Plan Check Fee 1448.53 Issue Date . . . . Valuation 562737- 62737Expiration Expiration Date 1/15/07 Qty Unit Charge Per Extension BASE FEE 2039.50 63.00 ---------------------------------------------------------------------------- 3.0000 THOU BLDG 500,001-1,000,000 189.00 Permit MECHANICAL Additional desc . Permit Fee . . . . 144.00 Plan Check Fee 36.00 Issue Date Valuation . . . . 0 Expiration Date 1/15/07 Qty Unit Charge Per Extension BASE FEE 15.00 5.00 9.0000 EA MECH FURNACE <=100K 45.00 5.00 9.0000 EA MECH B/C <=3HP/100K BTU 45.00 5.00 6.5000 EA MECH VENT FAN 32.50 1.00 ----------------7----------------------------------------------------------- 6.5000 EA MECH EXHAUST HOOD 6.50 Permit . . . ELEC:--NEW RESIDENTIAL Additional desc . . Permit Fee . . . . 277.81 Plan Check Fee 69.45 Issue Date . . . .- Valuation . . . . 0 Expiration Date 1/15/07 Qty Unit Charge Per Extension BASE FEE 15.00 6319.00 .0350 ELEC NEW RES - 1 OR 2 FAMILY 221.17 1332.00 .0200 ELEC GARAGE OR NON-RESIDENTIAL 26.64 1.00 ----------------------------------------- 15.0000 EA ELEC TEMPORARY POWER POLE. ---------------------------------- 15.00 Permit . . . PLUMBING Additional desc . . Permit Fee . . . . 255.00 Issue Date Expiration Date 1/15/07 Qty Unit Charge Per BASE FEE 24.00 6.0000 EA PLB FIXTURE LQPERMIT Plan Check Fee . . 63.75 Valuation . . . . 0 Extension 15.00 144.00 Application Number . . . . . 06-00001598 Permit . . . . . . PLUMBING Qty Unit Charge Per BASE FEE 15.00 Extension 1.00 15.0000 EA PLB BUILDING SEWER 15.00 2.00 6.0000 EA PLB ROOF DRAIN 12.00 4.00 7.5000 EA PLB WATER HEATER/VENT 30.00 1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00 1.00 9.0000 EA PLB LAWN SPRINKLER SYSTEM 9.00 16.00 .7500 EA PLB GAS PIPE >=5 12.00 1.00 ---------------------------------------------------------------------------- 15.0000 EA PLB GAS METER 15.00 Permit . . Additional'desc . Permit Fee Issue Date Expiration Date . . GRADING PERMIT 15.00 1/15/07 Plan Check Fee . Valuation . . . Qty Unit Charge Per Extension BASE FEE 15.00 ---------------------------------------------------------------------------- Special Notes and Comments 6319 sq. ft. sfd this permit does not include pool & spa block walls or driveway approach.July 19, 2006 1:18:03 PM jjohnson ------------------------------ --------------------------------------------- Other Fees . . . . . . . . . ART IN PUBLIC PLACES -RES 906.84 DIF COMMUNITY CENTERS -RES 74.00 DIF CIVIC CENTER - RES 480.00 ENERGY REVIEW FEE 144.85 DIF FIRE PROTECTION -RES 140.00 GRADING PLAN CHECK FEE .00 DIF LIBRARIES - RES 355.00 DIF PARK MAINT FAC - RES 22.00 DIF PARKS/REC - RES 892.00 STRONG MOTION (SMI) - RES 56.27 DIF STREET MAINT FAC -RES 67.00 DIF TRANSPORTATION - RES 1666.00 Fee summary Charged --------------------------- Paid Credited ---------- Due Permit Fee Total 2920.31 -------------------- .00 .00 2920.31 Plan Check Total 1617.73 1000.00 .00 617.73 Other Fee Total 4803.96 .00 .00 4803.96 Grand Total 9342.00 1000.00 .00 8342.00 LQPERMIT Building��—���/ Address Owne Iling�� �/ Address City /p A, I Zip 4 4 " P.O. BOX 1504 r 78-495 CALLE TAMPICO QUINTA, CALIFORNIA 92253 Pp_0 resss/L,l,�C// �'✓� ©. Ah - 01Z d6-L//Siy- APPLICATION ONLY w BUILDING: TYPE -CONST. OCC. GRP. -ate N A.P. Number 7 moo) 9 Legal Description /U 7e 02 Project Description 17/ - s;15� 3811" & Classif. I Lic. # Arch., Engr., � _ Designer � A Address Tel. ,�- � - w • /// �7.�-Gas' City Z1' State //G� � Lic. # LICENSED CONTRACTOR'S DECLARATION I hereby affirm that I am licensed under provisions of Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, and my license is In full force and effect. SIGNATURE DATE OWNER -BUILDER DECLARATION I hereby affirm that I am exempt from the Contractor's License Law for the following reason: (Sec. 7031.5,Business and Professions Code: Any city or county which requires a Permit to construct, atter, improve, demolish, or repair any structure, prior to its Issuance also requires the applicant for such permit to file a signed statement that he is licensed pursuant to the provisions of the Contractor's License Law, Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code, or that. he is exempt therefrom, and the basis for the alleged exemption. Any violation of Section 7031.5 by 'any applicant for a permit subjects the applicant to a civil penalty or not more than five hundred dollars ($500). C., I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and the structure is not intended or offered for sale. (Sec. 7044, Buisness and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon and who does such work himself or through his own employees, provided that such improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he did not build or improve for the purpose of sale.) II I, as owner of the property, am exclusively contracting with licensed contractors to con- struct the project. (Sec. 7044, Business and Professions Code: The Contractor's License Law does not apply to an owner of property who builds or improves thereon, and who contracts for such projects with a contractor(s) licensed pursuant to the Contractor's License Law.) I am exempt under Sec. B. & P.C. for this reason Date Owner WORKERS' COMPENSATION DECLARATION I hereby affirm that I have a certificate of consent to self -insure, or a certificate of Worker's Compensation Insurance, or a certified copy thereof. (Sec. 3800, Labor Code.) Policy No. Company r7 Copy is filed with the city. O Certified copy is hereby furnished. CERTIFICATE OF EXEMPTION FROM WORKERS' COMPENSATION INSURANCE (This section need not be completed if the permit is for one hundred dollars ($100) valuation or less.) I certify that in the performance of thg work -for which this permit is issued, I shall not employ any person in any manner so as to become subject to the Workers' Compensation Laws of California. Date Owner NOTICE TO APPLICANT: If, after making this Certificate of Exemption you should become subject to the Workers' Compensation provisions of the Labor Code, you must forthwith comply with such provisions or this permit shall be deemed revoked. CONSTRUCTION LENDING AGENCY I hereby affirm that there is a construction lending agency for the performance of the work for which this permit is issued. (Sec. 3097, Civil Code.) Lender's Name Lender's Address This is a building permit when properly filled out, signed and validated, and is subject to expiration if work thereunder is suspended for 180 days. I certify that I have read this application and state that the above information is correct. 1 agree to comply with all city and county ordinances and state laws relating to building construction, and hereby authorize representatives -of this city to enter the above- mentioned property for inspection purposes. Signature of a0plicant —Date— Mailing ateMailing Address City, State, Zip Sq. Ft. No. No. Dw. Size 3 Stories Units New,41 Add ❑ Alter ❑ Repair ❑ Demolition ❑ PERMIT AMANT Plan Chk. Dep. �— Plan Chk. Bal. Const. Mech. Electrical Plumbing S.M.I. Grading III I Driveway c Infrastru tur TOTAL REMARKS ZONE: BY: Minimum Setback Distances: Front Setback from Center Line Rear Setback from Rear Prop. Line Side Street Setback from Center Line Side Setback from Property Line FINAL DATE INSPECTOR Issued by: Date Permit Validated by: Validation: WHITE = FINANCE YELLOW = APPLICANT PINK = BUILDING DIVISION ,'oihella Valley Unified School District 83-733 Avenue 55, Thermal, CA 92274 (760) 398-5909 — Fax (760) 398-1224 Project Name: Owner's Name: Brian & Doreen This Box For District Use Only DEVELOPER FEES PAID AREA: J AMOUNT LEVEL ONE AMOUNT: LEVEL TWO AMOUNT: MITIGATION AMOUNT: COMWIND. AMOUNT: DATE: RECEIPT: CHECKM INITIALS: CERTIFICATE OF COMPLIANCE (California Education Code 17620) Project Address: 52-551 Via Savona, La Quinta, CA Project Description: 1 Single Family Dwelling APN: 772-410-027 Tract #: Date: 05/10/06 Phone No. (760) 771-3738 Lot #'s: Type of Development: Residential Xx Commercial Industrial Total Square Feet of Building Area: 6,319 sq. Ft. Certification of Applicant/Owners: The person signing certifies that the above information is correct and makes this statement under penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: 05/10/06 Signature: *********************************************************************** SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code Gov. Code Project Agreement Existing Not Subject to Fee 17620 65995 Approval Prior to 1/1/87 Requirement Number of Sq.Ft. 6,319 sq. ft. Amount per Sq.Ft. $ 2.63 Amount Collected $ 16,618.97 Building Permit Application Completed: Yes/No By: Carey M. Carlson, Asst. Supt., Business Services Certificate issued by: Leticia C. Torres, Facilities Analyst Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other'applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up to three (3) such extensions may be granted. At such time as this Certificate expires, if a building permit has not been issued for the project that is the subject of this Certificate, the owner will be reimbursed all fees that were paid to obtain this Certificate of Compliance. I_'C:c/mydocs/devfees/certificate of compliance form tablesTO USE.doc 1/16/03.T i Certificate ofOccupancy. I.•caavonnhn y� G� OF Building Y p & Safety Department This Certificateis issued pursuant to the requirements of Section 109 ,of the California Building Code, certifying that, at the time of issuance, this structure was in compliance with the provisions of the Building Code and the various ordinances of the City regulating building construction and/or use. BUILDING ADDRESS: 52-551 VIA SAVONA Use classification: SINGLE FAMILY DWELLING Building Permit No.: 06-1598 Occupancy Group: R3 Type of Construction: VN Land Use Zone: RL Owner of Building: BRIAN & DOREEN LONG Address: 116611 SASKATEWAN DR NW City, ST, ZIP: EDMONTON AB TGC2135 By: STEVE TRAXEL Date: Novenber 29, 2007 Building Official POST IN A CONSPICUOUS PLACE I TITLE 24 REPORT I Title 24 Report for: Long Residence 52-551 Via Savona La Quinta, CA CITY OF LA QUINTA BUILDING & SAFETY DEPT• APPROVED FOR CO Project Designer: Report Prepared By: Joan D. Hacker Insu-form, Inc. 41-921 Beacon Hill, Suite A Palm Desert, CA 92211 (760) 779-0657 Job Number: DateJUL 1 02006 D : 6/8/2006 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.1 by EnergySoft Job Number: User Number: 2655 TABLE OF CONTENTS I Cover Page 1 Table of Contents 2 Form CF -1 R Certificate of Compliance 3 Form MF -1 R Mandatory Measures Summary 9 Form WS -5R Residential Kitchen Lighting 11 HVAC System Heating and Cooling Loads Summary 12 Room Load Summary 15 EnergyPro 4.1 by EnergySoft Job Number: User Number: 2655 Certificate Of Compliance: Residential ❑ Addition (Part 1 of 4) CF -1 R Projec Title ❑ Multi Family ❑ Existing + Add/Alt 6/8/2006 Date ,2-551 Via $Rvona Project Address La Qlllntc'i (E) 90 deg Raised Floor Area: Building Permit # Inc_ Ing Natural Gas (760) 779-0657 5,505 ft2 t_form Documentation Author Telephone Plan Check/Date FnprqyPrn 1,710 ft 2 Avg. U: 0.57 15 Field Check/Date Complil6ce Method 27.1% Avg. SHGC: 0.41 Number of Stories: Climate Zone BUILDING ZONE TDV Energy Use Standard Proposed Compliance Vent (kBtu/sf-yr-) Design Design Margin Hgt. Area 2 n!a n/a n/a Space Heating 3.00 3.93 -0.93 Space Cooling 61.42 57.39 4.03 Fans 9.30 9.74 -0.44 Domestic Hot Water 4.06 6.70 -2.64 Pumps 0.00 0.00 0.00 Totals 77.79 77.77 0.02 Pe 0.0% Building Type: FX] Single Family ❑ Addition Total Conditioned Floor Area: 6,319 ft2 ❑ Multi Family ❑ Existing + Add/Alt Existing Floor Area: n/a ft2 Building Front Orientation: (E) 90 deg Raised Floor Area: 814 ft2 Fuel Type: Natural Gas Slab on Grade Area: 5,505 ft2 Fenestration: Average Ceiling Height: 11.7 ft Area: 1,710 ft 2 Avg. U: 0.57 Number of Dwelling Units: 1.00 Ratio: 27.1% Avg. SHGC: 0.41 Number of Stories: 1 BUILDING ZONE INFORMATION # of Thermostat Vent Zone Name Guest First Floor Second Floor Floor Area Volume 9nn 9nnn 460 55 260 814 9,768 Units Zone Type Type n 14 Conditioned Setback 0.73 Cnnditioned Setback 0.13 Conditioned Setback Hgt. Area 2 n!a n/a n/a OPAQUE SURFACES Insulation Act. Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Wall Wnnd 86 n 074 -R-1 g R -n (L An An Wall Wood 171 _0_QZ4 R_19 R-0.0 180 An Wall wood 222 0074 R-19 R-0 0 270 An Wall Wnnd 282 n 074 R-19 R_n n n qn Roof Wood 900 0 025 X38 R-0.0 270 n Wall Wood 63 0.074 R-19 R-0 0 A0 A Wall Wnnd 15 n n74 R-19 R_n n 135 gn Wall Wnnd 718 n n74 R_19 R -n n 18n An Wall Wood 56 0.074 R-19 R-0 0 270 _q Wall Wand 1 174 0.074 R_19 R -n o _n gn Wall Wnnd 15 n n74 R-19 R_n n 45 An Rnnf Wnnd x,92 n n9s _$_38 R -n d 0 n Floor Wood 814 0048 R_19 R-0.0 _0 180 Wall Wood 338 0 074 R_19 R-0 0 gn An Wall Wood 19 0 074 R-19 R-0 0 135 An Wall Wnnd 1000 0 074 R_19 R-0.0 180 g0 Wall Wnnd 413 a n74 R-1 S R-Qn 97n An Wall Wnnd 1 3nn n n74 X11 R-0 0 n qn Wall Wnnd 19 n n74 R-19 R_n n 45 gn Roof Wood 814 n n25 R_38 R-0 0 n n Gains Condition Y / N Status JA IV Reference Location / Comments EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:3 of 17 Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Long Residence 6/8/2006 Project Title Date FENESTRATION SURFACES True Cond. # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Location/ Comments 1_ 2 3 4 5 Window Window Window Window Window Front Front Front Left Left (F.) (E) (E) (S) (S) 48.0 057 NI --11L38 SQG 0_ _90- New PPr, R01 ARRAN 60 (2) 18.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) 48.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) 24.0 0.570 NI -1 0_38 COG 180 90 New PPG SOLARBAN 60 (2) 5.0 0.570 NI -1 0_38 COG 180 90 New PPG SOLARBAN 60 (2) Clear Clear Clear Clear Clear Guest Guest Guest Guest Guest 6 Z Window Window Rear Rear on (W) 10.0 0.570 NI -10.38 COG 270 90 New PPG SOLARBAN 60 (22) 64.0 0.57 NI -1-0-W . COG AZO_ 90 New PEG SOLARBAN 60 (2) Clear Clear Guest Guest 8 Window Rear (W) 36.3 0.570 NI -1 0.38 COG 270 90 New PPG SOLARBAN 60 (2) Clear Guest 6 Window Rear (W) 48.0 0.57 NI-1JQM COG _270 90 New PPG SOLARBAN 60 (2) Clear Guest 1Q Window Rear ON) 20.0 0.57 NI -1Q3$ COG 270 90 New PPG SOLARBAN 60 (2) Clear Guest 11 12 Window Window Right Front (N) (E) 18.0 0.570 NI.10 38 COG 0 90 New PPG SOLARBAN 60 (2)2 40.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) Clear Clear Guest First Floor 13. Window Front (E) 9110 057 NI -1 J .3B MG 90_ _9k New PPG SOLARBAN 60 (2) Clear First Floor 14 Window Front (E) 54.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) Clear First Floor 15 Window Front (E) 28.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (22) Clear First Floor 16 Window Front (E) 40.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) Clear First Floor 17 Window Front (E) 29.3 0.570 NI -1 0_38 ro 90 90 New PPG SOLARBAN 60 (2) Clear First Floor 18 Window Front (E) 48.0 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) Clear First Floor J9 Window Front (SE) 15.1 0.579 -NIA -0-W COG 135 90 New PPG SOLARBAN 60 (2) Clear First Floor 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 11613. INTERIOR AND EXTERIOR SHADING Condition Status Location/ Comments New Guest New First Floor Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LEA. RExt. Dist. Len. Hgt. Dist. Len. Hgt. 1 Bug Screen 0.76 8.0 3.0 2.0 0.1 2.0 2.0 2 Bug Screen 0.76 3.0 1.5 2.0 0.1 2.0 2.0 3 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 4 Bug Screen 0.76 8.0 3.0 2.0 0.1 2.0 2.0 5 Bug Screen 0.76 2.5 2.0 2.0 0.1 2.0 2.0 6 Bug Screen 0.76 5.0 2.0 2.0 0.1 2.0 2.0 7 Bug Screen 0.76 8.0 4.0 12.0 0.1 12.0 12.0 8 Bug Screen 0.76 2.5 14.6 2.0 0.1 2.0 2.0 9 Bug Screen 0.76 8.0 3.0 2.0 0.1 2.0 2.0 10 Bug Screen 0.76 5.0 2.0 2.0 0.1 2.0 2.0 11 Bug Screen 0.76 4.5 4.0 2.0 0.1 2.0 2.0 12 Bug Screen 0.76 8.0 2.5 2.0 0.1 2.0 2.0 13 Bug Screen 0.76 8.0 3.5 2.0 0.1 2.0 2.0 14 Bug Screen 0.76 9.0 3.0 2.0 0.1 2.0 2.0 15 Bug Screen 0.76 8.0 3.5 2.0 0.1 2.0 2.0 16 Bug Screen 0.76 8.0 2.5 2.0 0.1 2.0 2.0 17 Bug Screen 0.76 9.9 1.5 2.0 0.1 2.0 2.0 18 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 19 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (so (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Type Length R -Val. Location JA IV Reference Slab Perimeter 18 None No Insulation 26-A1 Slab Perimeter 90 None No Insulation 26-A1 Run Initiation Time: 06/08/06 15:27:26 Run Code: 1149805646 EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:4 of 17 Condition Status Location/ Comments New Guest New First Floor Run Initiation Time: 06/08/06 15:27:26 Run Code: 1149805646 EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:4 of 17 Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Long Residence 6/8/2006 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Comments 2Q 21 Window Window Left Left (S) (S) 15 1 057 NI -1 38 9.0 0.570 NI -1 0_38 22 Window Left (S) 18.0 0.570 NI -1 0_38 23 Window Left (S) 2.0 0.570 NI -1 0_38 24 Window Left (S) 22.0 0.570 NI -1 0_38 25 Window Left (S) 48.0 0.57 0_38 ?& Window Left (S) 48.0 0_570 NI -1 0.38 27 Window Left (S) 20.0 0.570 NI -1 0.38 2$ Window Rear (W) 48.0 0.57 NI-1-0-W ?,Q Window Rear ON) 37.5 0-57 NI-1Ji8 3 Window Rear COG 270 90 New PPG SOLARBAN 60 (2) 48.0 0.570 NI.10 38 31 Window Rear (W) 28.0 0.570 NI -1 0_38 2.0 Window Rear (W) 9.0 0.570 NI -1 0"38 33 Window Rear on 48.0 0.570 NIA 0_38 34 Window Rear (W) 216.0 0.570 NI -1 0_38 35 Window Rear (W) 48.0 0.570 NI -1 0_38 36 Window Rear (W) 28.0 0.570 NI -1 0_38 37 Window Rear (W) 30.0 0.570 NI -1 0_38 -$ Window Rear (W) 48.0 0.570 I-1 0.38 COG 180 _0_ New PPG SOI ARRAN 60 (2) COG 180 90 New PPG SOLARBAN 60 (22) Clear Clear First Floor First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 180 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 -;3Q New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor rOG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor COG 270 90 New PPG SOLARBAN 60 (2) Clear First Floor 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len. Hgt. Dist. Len. Hgt. 20 Bug Screen 0.76 6.5 2.4 2.0 0.1 2.0 2.0 21 Bug Screen 0.76 4.5 2.0 2.0 0.1 2.0 2.0 22 Bug Screen 0.76 4.5 2.0 2.0 0.1 2.0 2.0 23 Bug Screen 0.76 1.0 2.0 2.0 0.1 2.0 90 24 Bug Screen 0.76 5.5 2.0 2.0 0.1 3.0 2.0 25 Bug Screen 0.76 8.0 6.0 43.0 0.1 43.0 43.0 26 Bug Screen 0.76 8.0 6.0 10.0 0.1 10.0 10.0 27 Bug Screen 0.76 8.0 1.3 10.0 0.1 10.0 10.0 28 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 29 Bug Screen 0.76 3.0 12.5 2.0 0.1 2.0 2.0 30 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 31 Bug Screen 0.76 8.0 1.9 20.0 0.1 20.0 20.0 32 Bug Screen 0.76 1.5 6.0 20.0 0.1 20.0 20.0 33 Bug Screen 0.76 8.0 6.0 20.0 0.1 20.0 20.0 34 Bug Screen 0.76 9.0 12.0 15.0 0.1 15.0 15.0 35 Bug Screen 0.76 2.0 12.0 15.0 0.1 15.0 15.0 36 Bug Screen 0.76 8.0 1.9 4.0 0.1 4.0 4.0 37 Bug Screen 0.76 3.0 10.0 4.0 0.1 4.0 4.0 38 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (so (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Type L Insulation R -Val. Location JA IV Reference Condition Location/ Status Comments Run Initiation Time: 06/08/06 15:27:26 Run Code: 1149805646 EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:5 of 17 Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Long Residence 6/8/2006 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area LI -Factor" SHGCZ Azm. Tilt Stat. Glazing Type Comments M Window Rear (W) 5.0 057 NI -1_38 ('o.G AZO_ _90_ New PPG SO ARRAN BO (9) cigar First Floor 40 Window Right (N) 18.0 0.570 NI -1 0_38 COG 0 90 New PPG SOLARBAN 60 (2) Clear First Floor 41 Window Right (N) 22.5 0.570 NI -1 0_38 COG 0 90 New PPG SOLARBAN 60 (2) Clear First Floor 42 Window Right (N) 17.5 0.570 NI -1 0_38 COG 0 90 New PPG SOLARBAN 60 (2) Clear First Floor 43 Window Right (N) 2.0 0.570 NI -1 0_38 COG 0 90 New PPG SOLARBAN 60 (2) Clear First Floor 44 Window Right (N) 48.0 0.570 NI.10 38 COG 0 90 New PPG SOLARBAN 60 (2) Clear First Floor -45 Window Right (N) 18.0 0-57 NI -1 -0-M SLOG 0 90 New -PPG SOLARBAN 60 (2) Clear First Floor 46 Window Right (NE) 15.1 0.570 NI -1 0_38 COG 45 90 New PPG SOLARBAN 60 (2) Clear First Floor 9Z Window Front (E) 11.3 0.57 1L -1 -QM COG 90 90 NewL-PPG SOLARBAN 60 (2) Clear Second Floor g$ Window Front (E) 24.0 O 557 1L -1 -QM COG 90 90 New PPG SOLARBAN 60 (2) Clear Second Floor 49 Window Front (E) 24.0 0.570 NI.10 38 COG 90 90 New PPG SOLARBAN 60 (2) Clear Second Floor 50 Window Front (E) 2.3 0.570 NI -1 0_38 COG 90 90 New PPG SOLARBAN 60 (2) Clear Second Floor 51 Window Front (SE) 11.3 0.57 N1-1 0.38 COG 135 -0- New PPG SOLARBAN 60 (2) Clear Second Floor 52 Window Rear an 2.3 0.570 NI -1 0_38 COG 270 90 New PPG SOLARBAN 60 (2) Clear Second Floor 53 Window Rear (W) 28.0 0.570 NI -1 0_38 COG 270 90 New PPG SOLARBAN 60 (2) Clear Second Floor 54 Window Rear (W) 9.0 0.570 NI -1 0_38 COG 270 90 New PPG SOLARBAN 60 (2) Clear Second Floor 55 Window Rear (W) 48.0 0.570 NI -1 0_38 nor, 270 90 New PPG SOLARBAN 60 (2) Clear Second Floor 56 Window Right (NE) 11.3 0.570 NI -1 0_38 COG 45 90 New PPG SOLARBAN 60 (2) Clear Second Floor 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA. Dist. Len. Hgt. Dist. Len. Hgt. 39 Bug Screen 0.76 2.0 2.5 2.0 0.1 2.0 2.0 40 Bug Screen 0.76 4.5 4.0 2.0 0.1 2.0 2.0 41 Bug Screen 0.76 4.0 2.5 2.0 0.1 2.0 2.0 42 Bug Screen 0.76 1.9 10.0 3.0 0.1 3.0 2.0 43 Bug Screen 0.76 2.0 1.0 2.0 0.1 2.0 2.0 44 Bug Screen 0.76 8.0 6.0 2.0 0.1 3.0 2.0 45 Bug Screen 0.76 9.5 4.0 2.0 0.1 2.0 2.0 46 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 47 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 48 Bug Screen 0.76 8.0 3.0 2.0 0.1 2.0 2.0 49 Bug Screen 0.76 8.0 3.0 2.0 0.1 2.0 2.0 50 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 51 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 52 Bug Screen 0.76 1.5 1.5 2.0 0.1 2.0 2.0 53 Bug Screen 0.76 8.0 1.9 2.0 0.1 2.0 2.0 54 Bug Screen 0.76 1.5 6.0 2.0 0.1 2.0 2.0 55 Bug Screen 0.76 8.0 6.0 2.0 0.1 2.0 2.0 56 Bug Screen 0.76 4.5 2.5 2.0 0.1 2.0 2.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (so (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments Run Initiation Time: 06/08/06 15:27:26 Run Code: 1149805646 EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:6 of 17 Certificate Of Compliance: Residential (Part 3 of 4) CF -1 R Long Residence 6/8/2006 Project Title Date HVAC SYSTEMS Guest Ducted Ducted Outdoors 4.2 New Yes First Floor Ducted Ducted Attic 4.2 New Yes Second Floor Ducted Ducted Attic 4.2 New Yes Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Ratedl Tank Energy Standbyl Tank Insul. Water Heater # in Input Cap. Condition Factor Loss R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE 1 (%) Ext. A O SMITH PGCG-50-246 Small Gas Kitchen Pipe Ins 4 40,000 50 New 0.62 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (ft) Add 1/2" Control # HP Tvpe In Plenum Outside Buried Insulation 1 For small gas storage (rated input — 75000 Btu/hr), electric resistance and heat pump water heaters, list energy factor. For large gas storage water heaters (rated input > 75000 Btu/hr), list Rated Input, Recovery Efficiency and Standby Loss. For instantaneous gas water heaters, list Rated Input, and Recovery Efficiency. REMARKS COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Name: Title/Firm: Address: Telephone: Lic. #: (signature) (date) Enforcement Agency Name: Title/Firm: Address: Telephone: Documentation Author Name: Joan D. Hacker Title/Firm: I nsu-form. Inc. Address: 41-921 Beacon Hill. Suite A Palm Desert, CA 92211 Telephone: (760) 779-0657 pp ++ AA ^ o� UW (signatur)t 9 (date) (signature/stamp) (date) Heating Minimum Cooling Minimum Condition Thermostat Location Type Eff Type Eff Status Type Guest Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback First Floor Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback Second Floor Central Furnace 80% AFUE Split Air Conditioner 13.0 SEER New Setback HVAC DISTRIBUTION Duct Duct Condition Ducts Location Heating Cooling Location R -Value Status Tested? Guest Ducted Ducted Outdoors 4.2 New Yes First Floor Ducted Ducted Attic 4.2 New Yes Second Floor Ducted Ducted Attic 4.2 New Yes Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Ratedl Tank Energy Standbyl Tank Insul. Water Heater # in Input Cap. Condition Factor Loss R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE 1 (%) Ext. A O SMITH PGCG-50-246 Small Gas Kitchen Pipe Ins 4 40,000 50 New 0.62 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (ft) Add 1/2" Control # HP Tvpe In Plenum Outside Buried Insulation 1 For small gas storage (rated input — 75000 Btu/hr), electric resistance and heat pump water heaters, list energy factor. For large gas storage water heaters (rated input > 75000 Btu/hr), list Rated Input, Recovery Efficiency and Standby Loss. For instantaneous gas water heaters, list Rated Input, and Recovery Efficiency. REMARKS COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Name: Title/Firm: Address: Telephone: Lic. #: (signature) (date) Enforcement Agency Name: Title/Firm: Address: Telephone: Documentation Author Name: Joan D. Hacker Title/Firm: I nsu-form. Inc. Address: 41-921 Beacon Hill. Suite A Palm Desert, CA 92211 Telephone: (760) 779-0657 pp ++ AA ^ o� UW (signatur)t 9 (date) (signature/stamp) (date) Certificate Of Compliance: Residential (Part.4 of 4) CF -1 R Long Residence 6/8/2006 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement aaencv determines the adeauacv of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special justification and documentation submitted. I Plan Field The Roof "R-38 Roof Attic" includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual. HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- approved HERS provider using cec approves testing anaior venncation metnoss ans must oe reponea on the t:r-411 installation certificate. Plan Field The HVAC System "Guest" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "Guest" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. This building has credit for Insulation Quality Installation. A certified HERS rater must visually verify the installation of all Insulation. The Cooling System "Carrier 38ETG04230" includes credit for a 11.6 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System "First Floor' incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF - 4R. The HVAC System "First Floor' incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. This building has credit for Insulation Quality Installation. A certified HERS rater must visually verify the installation of all Insulation. The Cooling System "Carrier 38TXA06033" includes credit for a 10.8 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. The HVAC System "Second Floor' incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "Second Floor' incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. This building has credit for Insulation Quality Installation. A certified HERS rater must visually verify the installation of all Insulation. The Cooling System "Carrier 38ETG04230" includes credit for a 11.6 EER Condenser. A certified HERS rater must field verify the installation of the correct Condenser. I EneravPro 4.1 by EneravSoft User Number: 2655 Job Number: Page:8 of 17 I Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (7 below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - applicable. N/A DESIGNER MENT Building Envelope Measures § 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ ❑x ❑ § 150(b): Loose fill insulation manufacturers labeled R -Value: ❑ ❑ ❑ R§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not ❑ ❑X ❑ apply to exterior mass walls). R§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. 1. Masonry and factory -built fireplaces have: ❑ ❑X ❑ a. closable metal or glass door covering the entire opening of the firebox ❑ ❑X ❑ b. outside air intake with damper and control, flue damper and control ❑ ❑X ❑ 2. No continuous burning gas pilot lights allowed. ❑ 1K ❑ § 150(f): Air retarding wrap installed to comply wits 151 meets requirements specified in the ACM Residential Manual. ❑ ❑X ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ permeance rate no greater than 2.0 perm/inch. ❑ ❑ ❑ § 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and El 1K El CF -6R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfillration Controls. ❑ ❑ ❑ 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ ❑X ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain ❑ 1K ❑ Coefficient (SHGC), and infiltration certification. Page:9 of 17 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ ❑X ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ❑X ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ ❑X ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑X ❑ § 1500): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with ❑ ❑X ❑ insulation having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ ❑X ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150 -AIB or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire ❑ ❑X ❑ length of recirculating sections of hot water pipes shall be insulated to Table 150B. 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source ❑ o ❑ and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment ❑ ❑ ❑ maintenance, and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page:9 of 17 Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (7 below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - applicable. N/A DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ X❑ ❑ 605, and Standard 6-5; supply -air and retum-air ducts and plenums are insulated to a minumum installed level of R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ X❑ ❑ sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and ❑ ❑ ❑ support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause ❑ © ❑ reductions in the cross-sectional area of the ducts. ❑ ❑ ❑ 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ ® ❑ duct tapes unless such tape is used in combination with mastic and draw bands. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ X❑ ❑ same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article ❑ ® ❑ 4. Exhaust fan systems have back draft or automatic dampers. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ ® ❑ dampers. EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page: 10 of 17 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ ® ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. ❑ ® ❑ 7. Flexible ducts cannot have porous inner cores. § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ ❑ ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. 2. System is installed with: a. At least 36" of pipe between filter and heater for future solar heating. b. Cover for outdoor pools or outdoor spas. 3. Pool system has directional inlets and a circulation pump time switch. § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria Lighting Measures § 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ © ❑ ❑ ❑ ❑ ❑ ® ❑ § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ Q ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ X❑ ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ Q ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ X❑ ❑ controlled by an occupant sensor that complies with Section i 19(d) that does not turn on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are❑ X❑ ❑ certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ X❑ ❑ same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page: 10 of 17 Residential Kitchen Lightin- Worksheet WS -5R Long Residence 6/8/2006 Project Title Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-0. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. High Efficacy Luminaire Type High Efficacy? Watts Quantity Watts Other Watts (1) 38w Compact Fluorescent 2D Elec Yes X No 37.0 x 15 = 555 or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Total A: 555 B: 0 COMPLIES IF A >_ B YES® NO ❑ EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page: 11 of 17 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Long Residence 6/8/2006 SYSTEM NAME FLOOR AREA Guest 900 ENGINEERING CHECKS 11SYSTEM LOAD Number of Systems 1 Heating System Output per System 70,000 Total Output (Btuh) 70,000 Output (Btuh/sqft) 77.8 Cooling System Output per System 41,500 Total Output (Btuh) 41,500 Total Output (Tons) 3.5 Total Output (Btuh/sqft) 46.1 Total Output (sgft/Ton) 260.2 Air System CFM per System 1,395 Airflow (cfm) 1,395 Airflow (cfm/sqft) 1.55 Airflow (cfm/Ton) 403.4 Outside Air (%) 0.0 Outside Air (cfm/sqft) 0.00 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM ISensiblel Latent CFM I Sensible 1,164 20,241 1,632 325 15,658 0 2,099 1,445 0 0 0 0 0 0 0 0 0 2,099 1,445 24 439 1 632 Carrier 38ETGO4230 28,449 9,247 Total Adjusted System Output 28,4491 9 247 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK I Aug 2 pm 70,000 70,000 Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0°F 69.0°F 69.0°F = 116.20F Supply AirEw Ducts Outside Air * '' 0 cfm 115.2 OF Supply Fan Heating Coil 1395 cfm ROOMS 70.0 OF 69.0 °F i f% Return Air Ducts `S DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 111.0/77.6°F 79.4/66.0°F 79.4/66.0°F 60.3/59.2°F Supply Air Ducts Outside Air t� 0„»::>: 0 cfm Supply Fan Cooling Coil 61.7 / 59.7 OF 1395 cfm 52.0% R.H. ROOMS 79.4/66.0°F 78.0/65.5°F k Return Air Ducts 4 EnergyPro 4.1 by EnergySoft User Number: 2655 Job Number: Page: 12 of 17 1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Long Residence 6/8/2006 SYSTEM NAME FLOOR AREA First Floor 4,605 Number of Systems 2 Heating System Output per System 60,000 Total Output (Btuh) 120,000 Output (Btuh/sqft) 26.1 Cooling System Output per System 59,000 Total Output (Btuh) 118,000 Total Output (Tons) 9.8 Total Output (Btuh/sqft) 25.6 Total Output (sgft/Ton) 468.3 Air System CFM per System 1,395 Airflow (cfm) 2,790 Airflow (cfm/sqft) 0.61 Airflow (cfm/Ton) 283.7 Outside Air (%) 0.0 Outside Air (cfm/sqft) 0.00 Note: values above given at ARI conditions EATING SYSTEM 26.0 OF Outside Air 0 cfm 68.1 of 68.1 OF 68.1 OF Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM I Sensiblel Latent I I CFM I Sensible 2,097 63,240 5,059 1,527 59,661 0 6,558 5,507 0 0 0 0 0 0 0 0 0 6,558 5,507 76,355[777; 059 70 676 Carrier 38TXA06033 97,259 0 120,000 Total Adjusted System Output 97 259 0 120,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am 108.60F Supply Fan Heating Coil 2790 cfm in Return Air Ducts `i Supply Air Ducts 106.7 of ROOMS 70.0 of I DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 111.0/77.6OF 80.2/60.0OF 80.2/60.OoF 47.5/45.8OF Supply Air Ducts Outside Air 0 cfm Supply Fan Cooling Coil 49.7 / 46.9 OF 2790 cfm 31.8% R.H. FROOMS 80.2/60.0 of 78.0/59.2OF k Return Air Ducts `i I EneravPro 4.1 by EnerovSoft User Number: 2655 Job Number: Page:13 of 17 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Long Residence 6/8/2006 SYSTEM NAME FLOOR AREA Second Floor 814 INEERI Number of Systems 1 Heating System Output per System 70,000 Total Output (Btuh) 70,000 Output (Btuh/sqft) 86.0 Cooling System Output per System 41,500 Total Output (Btuh) 41,500 Total Output (Tons) 3.5 Total Output (Btuh/sqft) 51.0 Total Output (sgftrTon) 235.4 Air System CFM per System 1,395 Airflow (cfm) 1,395 Airflow (cfm/sqft) 1.71 Airflow (cfm/Ton) 403.4 Outside Air (%) 0.0 Outside Air (cfm/sqft) 0.00 Note: values above given at ARI conditions EATING S' 26.0 OF 0 Outs 0 cfm 68.8 of Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK I COIL HTG. PEAK CFM I Sensiblel Latent I I CFM I Sensible 1,123 19,655 1,553 416 19,779 0 2,038 1,826 0 0 0 0 0 0 0 0 0 2,038 1,826 23,7311 1 553 23 431 Carrier 3BETG04230 28,484 9,171 70,000 Total Adjusted System Output 28 484 9,171 70,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am 68.8 OF 68.8°F 115.90F Supply Fan Heating Coil 1395 cfm OOLING SYSTEM PSYCH 11.0 / 77.6 of >---J Outside Air_ 0 cfm 79.4/65.9 of res at Time of H �% Return Air Ducts 4 79.4/65.9OF 79.4/66.OcF M 60.2/59.10F Supply Fan Cooling Coil 1395 cfm �% Return Air Ducts 11 Supply Air Ducts 114.7 of ROOMS 70.0 of Supply Air Ducts 61.6 / 59.6 OF 51.8°% R.H. ROOMS 78.0 / 65.5 OF EnergyPro 4.1 by EnergySoff User Number: 2655 Job Number: Page: 14 of 17 ROOM LOAD SUMMARY PROJECT NAME Long Residence DATE 6/8/2006 SYSTEM NAME Guest FLOOR AREA 900 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE Guest Guest 1 1 164 20,241 1,632 1,164 20,241 1,632 325 15,658 PAGE TOTAL 1 1,164 20,241 1,632 325 15,658 TOTAL 1 1,164 20,241 1,63211 325 15,658 EnergyPro By EnergySoft User Number: User Job Number: Page:15 of 17 ROOM LOAD SUMMARY :1 PROJECT NAME Long Residence DATE 6/8/2006 SYSTEM NAME First Floor FLOOR AREA 4,605 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENT CFM SENSIBLE LATENT CFM SENSIBLE First Floor First Floor 1 2,097 63,240 5,059 2,097 63,240 5,059 1,527 59,661 PAGE TOTAL 1 2,097 63,240 5,059 1,527 59,661 TOTAL 1 2,097 63,240 5,05911 11527 59,661 EnergyPro By EnergySoft User Number: User Job Number: Page:16 of 17 71 ROOM LOAD SUMMARY PROJECT NAME Long Residence DATE 6/8/2006 SYSTEM NAME Second Floor FLOOR AREA 814 ROOM LOAD SUMMARY ROOM COOLING PEAK COIL COOLING PEAK COIL HTG. PEAK ZONE NAME ROOM NAME Mult. CFM SENSIBLE LATENTSecond SENSIBLE LATENT CFM SENSIBLE Second Floor Floor 1 1,123 19,655 1,553 19,655 1,553 416 19,779 r1l PAGE TOTAL 1 1,123 19,655 1,553 416 19,779 TOTAL 1 1,123 19,655 1,553 416 19,779 EnergyPro By EnergySoft User Number: User Job Number: Page:17 of 17