07-2029 (SFD)rr• - -
P.O. BOX 1504
78-495 CALLE TAMPICO,
LA QUINTA, CALIFORNIA 92253 BUILDING & SAFETY DEPARTMENT
BUILDING PERMIT
Application Number: `07_ -00 -002029 - Owner:
Property Address: 53664 VIA STRADA, STEVE KESSLER
APN: 772-540-046- - - J 76-906 TOMAHAWK RUN
Application description: DWELLING - SINGLE FAMILY DETACHED INDIAN WELLS_CA CA 92210
Property Zoning: LOW DENSITY RESIDENTIAL Other struct info
Application valuation: 443700
Contractor:
Applicant: Architect or Engineer: Owner
VOICE (760) 777-7012
- FAX (760) 777-7011
INSPECTIONS (760) 777-7153
C
DITION 2 01/2,005
of
"49
Date: 10/15/07
LQPERI111T
� w---------
-------------=---------------------------------------------7-------------------_ft
. LICENSED CONTRACTOR'S DECLARATION
WORKER'S COMPENSATION DECLARATIO
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with
I hereby affirm under penalty of perjury one of the following declarations:
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect.
I have and will maintain a certificate of consent to self -insure forworkers' compensa on, as provided
License Class: License No.:
_
for by Section 3700 of the Labor Code, for the performance of the work for which "this permit is
-
issued.
- Date: Contractor:
- _ I have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor
- r
Code, for the performance of the work for which this permit is issued. My workers' compensation -
- OWNER -BUILDER DECLARATION
insurance carrier and policy number are:
hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the
Carrier 3 .PA Policy Number NO -
' following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to
I certify that, in the perfor nce f the work for which this permit,js issued, I shall not employ any
- construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the
person in any manner oast become subject to the workers' compensation laws of California,
permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State
_
and agree that, if I s / ould b ome subject to the workers' compensation provisions of Section
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or
3700 of the abor ode, I all forthwith comply with those provisions.
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by
`
any applicant for a permit subjects the applicant to a civilpenalty of not more than five hundred dollars ($500).:
ate: sY) a Applicant: '
(_) I, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
- the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
Contractors' State License Law does not apply to an owner of property who builds or improves thereon,
SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
and who does the work himself or herself through his or her own employees, provided that the
DOLLARS J$1 00,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
-improvements are not intended or offered for sale. If, however, the building or improvement is sold within
SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. "
one year of completion, the owner -builder will have the burden of proving that he or she did not build or
L
improve for the purpose of sale.). ` '
- - APPLICANT ACKNOWLEDGEMENT
' () I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec.
IMPORTANT Application isherebymade to the Director of Building and Safety for a permit subject to the ,
' 7044, Business and Professions Code: Th on actors' State License Law does not apply to an owner of
conditions and restrictions set forth on this application.
property who builds or improves thereon nd w o contracts for the projects with a contractor(s) licensed
1 . Each person upon whose behalf this application is made, each person at whose request and for
pursuant to the Contractors' State Lic se Law
whose benefit work is performed under or pursuant to any permit issued as a result of this application,
(_ 1 I am exempt under Sec. , B.& .C. for t s reason
". the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
-
of La Quinta, its officers, agents and employees for any act or omission related to the work being
p, u
performed under or following issuance of this permit.
O
ate: 'i ner-
2. Any permit issued as a result of this application beco s null and void if work is not commenced -
within 180 days from date of issuance of such per i or cessation of work for 180 days will subject
CONSTRUCTION LENDING AGENCY
permit to cancellation. '
I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the -
1 certify that I have.read this application and state th4theov nformation is correct. Iagree to comply with all
work for which this permit is issued (Sec. 3097, Civ. C.).
city and county ordinances and state taws relating tnstruction, and hereby authorize representatives
Lender's Name:
. -
of this county to enter upontheove-mentioned prspection purposes.
t S' ature (Applicant or Agent):
. Lender's Address:
LQPERI111T
Application Number
07-00002029
Permit . . .
BUILDING PERMIT
Additional desc .
Permit Fee . . . .
1843.50
Plan Check Fee
1198.28
Issue Date
Valuation . . .
443700
Expiration Date
4/12/08
Qty Unit Charge
Per
Extension
BASE
FEE
639.50
344.00 3.5000
THOU BLDG
100,001-500,000
1204.00 .
Permit . .
MECHANICAL
Additional desc..
Permit Fee . .
126.00
Plan Check Fee :
'31.50
Issue Date . .
Valuation
0
Expiration Date '.
4/12/08..
Qty Unit Charge
Per
Extension
BASE
FEE
15.00
4:009.0000
EA MECH
FURNACE <=10.OK
36.00
4.00 9.0000
EA MECH
B/C <=3HP/100K BTU
36.00
5.00 6.5000
EA MECH
VENT FAN
32.50
1.00 6.5000
EA MECH
EXHAUST HOOD -
6.50
Permit . . .
ELEC.-NEW RESIDENTIAL
Additional desc .
Permit Fee
228.84;
Plan Check Fee
57.21
Issue Date
Valuation
0
Expiration Date
4/12/08
Qty Unit Charge
Per
Extension
BASE
-FEE
15.00.
5180:00 .0350
ELEC
NEW RES - 1 OR 2 FAMILY
181.30
877.00 .0200
ELEC
GARAGE OR NON-RESIDENTIAL
17.54
1.00 15.0000
EA 'ELEC
TEMPORARY POWER POLE
15.00
Permit . . .
PLUMBING
Additional desc
Permit Fee . . . . '.
219.00
Plan Check Fee
54.75
Issue Date : . . .
Valuation . . . .
0
Expiration Date
4/12/08
Qty Unit Charge
Per
Extension
BASE
FEE
15.00
.23.00 6.0000
EA PLB FIXTURE
138.00
LQPERMIT
Application Number
07-00002029
Permit . . . .
PLUMBING
Qty Unit Charge
Per
Extension
1.00 15.0000
EA PLB BUILDING SEWER
15.00
2.00 7.5000
EA • PLB .WATER HEATER/VENT
15.00
1.00 3.0000
EA PLB WATER INST/ALT/REP
3.00
1:00 9.0000
EA PLB. LAWN SPRINKLER SYSTEM
9.00
12.00 .7500
EA' PLB GAS PIPE >=5
9.00
1.00 15.0000
----------------------------------------------------------------------------
EA PLB GAS METER
15.00"
Permit
GRADING PERMIT
Additional desc .
Permit -Fee . . . .
15.00 Plan Check Fee
.00
Issue Date
Valuation
0
Expiration Date
4/12/08
Qty Unit,Charge
Per
Extension
BASE FEE
15.00
Special Notes and Comments
SFD - LOT 262, 5180 SF.
PERMIT DOES .NOT
INCLUDE POOL, SPA, BLOCK
WALLS OR
.DRIVEWAY APPROACH.
2001 CBC,,CMC, CPC, 2004
CEC, 2005
ENERGY CODES
Other Fees . . . .
ART IN PUBLIC PLACES=RES
609.25
DIF COMMUNITY CENTERS -RES
74.00
DIF CIVIC CENTER - RES
995.00
ENERGY REVIEW :FEE
119..83 -
DIF FIRE.PROTECTION-RES'
140.00
GRADING PLAN CHECK FEE
15.00
DIF LIBRARIES - RES
355.00
DIF`PARK MAINT FAC -. RES
22.00
DIF PARKS/REC - RES
892.00
STRONG MOTION (SMI) - RES
44:.37
DIF STREET MAINT FAC -RES
67.00
DIF TRANSPORTATION'- RES
1930.00 -
Fee summary Charged
Paid Credited
Due
Permit Fee Total
2432.34. .00 .00
2432.34
Plan Check Total
1341.74 .00 .00
1341.74
Other Fee Total
5263.45 .00 .00
5263.45.
Grand Total
9037.53 .00 .00
9037.53
LQPERAIIT
Bin #
,
City of La Quints
. Building & Safety Division
P.O. Box 1504, 78-495 Calle Tampico ' -
La Quinta, CA 92253 - (760) 777-7012 �•
Building- Permit Application and Tracking. Sheet
Permit #'
'
CO_�02c0i
Project Address: S3- �p.
�
O
Owner's Name: S
A: P. Number: D
Address: ILb Rim,
STi
!Telephone: (00. 960.Iq
Legal Description:-Zip:City,
Contractor:`
. '•� 's„
Address: "
Project Description:
City, ST, Zip: -
Telephoner
State Lic. # : r
Arch., Engr., Designer:
City Lic. #:
Address:
City, ST, Zip:
Telephone: 4_1
State Lic. #:
Name of Contact Person: !,
Construction Type: Occupancy:
Project type (circle one): New' Add'n Alter Repair
: Demo
Sq. Ft.:-.
# Stories:.
# Units:
Telephone # of Contact Person:Estimated
Value of Project:
`
APPLICANT:' DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Recd .
TRACKING .
PERMIT FEES
Plan Sets
°
Plan Check submitted
Item •
Amount
Structural Calcs.
Reviewed, ready for corrections+' .,
Plan Check Deposit
Truss Calcs.
Called Contact Person
Plan Check Balance
Energy Cales.
Plans picked up
Construction -
Flood plain plan
Plans` resubmitted
Mechanical
Grading plan
-
2°", Review; ready for corrections/issue
Electrical
'
i Subcontactor List
Called Contact Person ,
Plumbing
Grant Deed
Plans picked up
S.M.I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
''" Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.LP.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Permit Fees
M .. r • ' � ,• : � . ` �`• • . t , .� i tom. y � T T � ..
Coachella Valley Unified School District
83-733 Avenue 55, Thermal, CA 92274
(760) 398-5909 — Fax (760) 398-1224
ty .
This Box For District Use Only
DEVELOPER FEES PAID
AREA:
AMOUNT
LEVEL ONE AMOUNT:
LEVEL TWO AMOUNT:
MITIGATION AMOUNT:
COMM/IND. AMOUNT:
DATE:
RECEIPT:
CHECK #:
FNrnALS:
CERTIFICATE OF COMPLIANCE
(California Education Code 17620)
Project Name: Stev K ssler, Date: 10/05/07
Owner's Name: Steve Kessler Phone No. (760) 880-2919
Project Address: 53-664 Via Strada, La Quinta, CA
Project Description: 1 Single Family Dwelling
APN: 772-640-046 Tract #: Lot #'s:
Type of Development: Residential XXL Commercial Industrial
Total Square Feet of Building Area: 5,180 sq. Ft.
Certification of Applicant/Owners: The person signing certifies at a above information is correct and makes this statement under
penalty of perjury and further represents that he/she is authorize to si0i on behalf of the owner/developer.
Dated: 10/05/07
Signature:
SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN
ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE)
Education Code Gov. Code Project Agreement Existing
17620 65995 Approval Prior to 1/1/87
i
Number of Sq.Ft. 5,180.00 sq. ft.
Amount per Sq.Ft. $ 3.48
Amount Collected $ 18,026.40
Building Permit Application Completed: Yes/No
By: Carey M. Carlson, Asst. Supt., Support Services
Certificate issued by: Leticia C. Torres, Facilities Analyst
Not Subject to Fee
Requirement
Section 66020 of the Government Code asserted by Assembly Bill 3081, effective January 1, 1997, requires that this District provide (1) a written notice to the
project appellant, at the time of payment of school fees, mitigation payment or other exactions ("Fees"), of the 90 -day period to protest the imposition of these
Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code and other applicable law, this Notice shall serve to
advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other
requirements as described in section 66020 of the Government code. Additionally, the amount of the fees imposed is as herein set forth, whether payable at this
time or in whole or in part prior to issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on the date hereof. This Certificate of
Compliance is valid for thirty (30) days from the date of issuance. Extension will be granted only for good cause, as determined by the School District, and up
to three (3) such extensions may be granted. At such time as this Certificate expires, if a building permit has not been issued for the project that is the subject
of this Certificate, the owner will be reimbursed all fees that were paid to obtain this Certificate of Compliance.
LT:c/mydocs/devfees/certificate of compliance form tablesTO USE.doc 1/16/03 T
Permit # 6tLi hlBQ P
9
ap'ag
ty of La Quinta
Building tai Safety Division..
P.O. Box 1504, 78-495 Calle Tampico
l.a Quirita, CA-92253 - (760) 777-7012
Building Permit Application. and Tracking Sheet
[PftrojeAddr(ss:' !j- Owner's Name:
r: °�` )�
Lrd —� Address:
Legal Description:
Contractor: --
City, ST, Zip:
Telephone:7, t bb
Address: —
Project Description:
City,-ST-,Zip:--
Telephone:
State Lic. # •
Arch., Engr., Designer:
Address:City,
City Lic. #:.
ST, Zip:Telephone:
ADemo
rjConstruction
State Lic. #:
Type: Occupancy:
Project type (circle one): New Add'n Alter Repair '
Name of Contact Person:
Ft :
i_. ...... ... ......._.. .... ..._ - Sq.... [;#Stories:..
..... ..
.#-Units:.....: .
Telephone # of Contact?erson:
'7LO — �LEstimated Value.of Project:
APPLICANT: DO NOT WRITE BELOW THIS UNE
# Submittal Req'd Reed TRACKING .
PERMIT FEES
Plan Sets
z Plan Check submitted (o�
Item
Amount
Structure[ Calcs.
Reviewed; ready for orrections ��
Plan Check Deposit
Truss Cales.
�� Called Contact Person S
Plan Check Balance
Energy Calcs
Plans picked up /�
Construction
Flood plain plan ,.
Plans resubmitted
Mechanical
Grading. plan'
.2" Review, ready for eorrectio s/ ue
Electrical
Subcontactor.List '
Called Contact Person
Plumbing
Grant Deed
Plan §. picked up
S.M I.
H.O.A. Approval
Plans resubmitted
Grading
IN HOUSE:-
''� Review, ready for correctionslissue
Developer Impact Fee
Planning Approval
Called Contact Person
A.LP.P.
Pub. Wks. Appr
Date of permit issue
School Fees
Total Fermit Fees
SSS (raJ� Rk
.r • y
' CITY OF LA YQUINTA' SUB-CONT,iRACTO _ LIST
JOB ADDRESS93wo V S pA PERMIT NUMBER OWNER � -BUILDER S �Y-- ��•
This form shall be posted on the job with the Building Infection Card at all times in a conspicuous place. Only persons appearing on this list or their employees are authorized to work
on this job., Any changes to this list must be approved'by the Building Division prior to commencementof work. Failure, to comply will result in a stoppage of work and/or the voidance.
AV i
1.
N
rTITLE.24 REPORT
Title 24 Report for:
Steve Kessler
53-664 Via Strada
a La Quinta, -CA 92253 _
Project Designer:
Stephen Nieto
78-120 Calle, Estado Suite 206
- La Quinta, CA 92253
.760-564-4707
Report Prepared By:
Stephen Nieto
South West Concepts_
78-115 Calle Estado, Suite 201
'La Quinta, CA 92253
0
(76 ,564-4707
5 . t) QUANTA
CITY OF SA
DEPT•
- . BUILDING & SA
a APPROVED
FOR CONST UCTION
Job Number: oATe- i
Date:
5/6/2008
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
.authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.4 by EnergySoft Job Number: 262 User Number: 5970
Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R
Steve Kessler
5,166
ft2
Existing Floor Area:
516/2008
Project Title
Raised Floor Area:
0
ft2
Date
�3-6.64�Lia-Strada-Ig
Q «ta
Average Ceiling Height:
11.0
ft
Project Address
1.00
Building Permit #
Seth W -SL-oncep_ts
(760) 564-4707
Documentation Author
Telephone
Plan Check/Date
_Fn.ergyPro
Complia ce Method
CA
Climate Zone 15
Climate Zone
Field Check/Date
TDV
Standard
Proposed
Compliance
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
0.91
1.68
-0.77
Space Cooling
46.11
38.33
7.78
Fans
6.54
5.53
1.02
Domestic Hot Water
4.97
5.95
-0.98
Pumps
0.00
0.00
0.00
Totals
58.53
51.49
7.04
than Standard:
Building Type: [k Single Family
❑ Multi Family
Building Front Orientation:
Fuel Type:
Fenestration:
❑ Addition
❑ Existing + Add/Alt
(W) 270 deg
Natural Gas
Area: 793 ft2 Avg. U: 0.38
0%
Total Conditioned Floor Area:
5,166
ft2
Existing Floor Area:
n/a
ft2
Raised Floor Area:
0
ft2
Slab on Grade Area:
5,165
ft2
Average Ceiling Height:
11.0
ft
Number of Dwelling Units:
1.00
Ratio: 15.4% Avg. SHGC: 0.35 Number of Stories: 1
BUILDING ZONE INFORMATION # of Thermostat Vent
Zone Name Floor Area Volume Units Zone Type Type Hgt. Area
HVAC UNIT 1 9 407407 25 274 _04.7 Sleeping- _Sleeping.Stat- 2 -n/a
JiVJ� UNITS 2&3 2 75+9 3172 0_53 Living LivingStat- _2 _nLa
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay. Cont. Azm. Tilt
Wall Wnnd 72 _0-069 -R21 R-0 0_-135- 9.0
Wall_ WcLod_ _294 0..069 _R21 X0_0_-270 go
Wall_ Wood 80.8 0.06.9 R-21 _R-0_0- 0 gn
Wall Wnod 202 X069 -B21 -B_0 0 _9.0 9.0
Wall_ Wood 6620.069 R_21 R`0.0 180 _ 90
Wall Wand_ 542 _0._0.69 _R21 -B-0-0_ 270 90
IIO.oL None_ 48_ _0-.50.0_ _Non>, _B=0-0_ 270_ 90
Wall Wnod 378 -O-G6.9- -R21 0_ 0_ 90
Wall Wood 402 -U69_R21R-0.0_ 90_ 90
Wall Wood_ 858 _0...069 R_21 X0.0_ 180 _90
Gains Condition
Y / N Status JA IV Reference Location / Comments
IX ❑New D9 -A6 SI FFPING_ZONE
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Paoe:3 of 14 1
Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R
Steve Kessler 5/6/2008
Project Title Date -
FENESTRATION SURFACES
# Type Area U -Factor' - SHGCZ
True
Azm. Tilt
Cond.
Stat. Glazing Type
Location/
Comments
1-
Window Rear
(SE) 48.0 0.340_NFRG JIM AERO X135 _90- New
Andersen Permashield
_SL FFFING ZONE
2
Window
Front
(W)
25.0 0.340 NFRC 0_33 NFRC -
270 90 New
Andersen Permashield
SLEEPING ZONE
3
Window
Front
(W)
15.0 0.340 NFRC 0_33 NFRC
270 90 New
Andersen Permashield
SLEEPING ZONE
4
Window
Front
(W)
6.0 0.340 NFRC 0_33 NFRC
270 90 New
Andersen Permashield
SLEEPING ZONE
5
Window
Left
(N)
12.4 0.990 116-A 0_74 116-B
0 90 New
Single Non Metal Clear
SLEEPING ZONE
6
Window
Left
(N)
4.0 0.340 NFRC 0.33 NFRC
0 90 New
Andersen Permashield
SLEEPING ZONE
L
Window
Left
(N)
22.0 0.340 NFRC 0.33 NFRC
0 90 New Andersen Permashield
SLEEPING ZONE
8
Window
Left
(N)
21.3 1.280 116-A 0.80 116-B
0 90 New
Single Metal Clear
SLEEPING ZONE
9
Window
Left
(N1
4.0 0.340 NFRC 0.33 NFRC
0 90New Andersen Permashield
SLEEPING ZONE
10
Window
Left
(N)
4.0 0_340 NFRC 0_33 NFRC 0 90 New
Andersen Permashield
SLEEPING ZONE
11
Window
Left
(N)
4.0 0.340 NFRC 0_33 NFRC
0 90 New
Andersen Permashield
SLEEPING ZONE
12
Window
Rear
(E)
20.0 0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
SLEEPING ZONE
1a
Window
Rear
(E)
48.0 3� NFRC 0.33 NFRC _90
-9Q New.
Andersen Permashield
SLEEPING_ZONE
14
Window
Right
(S)
48.0 0.340 NFRC 0_33 NFRC
180 90 New
Andersen Permashield
SLEEPING ZONE '
15
Window
front
(W)
30.0 0.340 NFRC 0_33 NFRC
270 90 New
Andersen Permashield
LIVING ZONE
16
Window
Front
(W)
30.0 0.340 NFRC 0_33 NFRC
270 90 New
Andersen Permashield
LIVING ZONE
17
Window
Front
(W)
30.0 0.340 NFRC 0_33 NFRC:
270 90 New
Andersen Permashield
LIVING ZONE
18
Window
Left
(N)
6.0 0.340 NFRC 0_33 NFRC
0 90 New
Andersen Permashield
LIVING ZONE
19
Window
Left
U
48.0 0.340 NFRC 0.33 NFRC
0 90 New Andersen Permashield
LIVING ZONE
1. Indicate source either from NFRC or Table 116A. - 2. Indicate source either from NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING
Insulation <
Condition
Location/
Type Length
R -Val. Location JA IV Reference
Status
Comments
Slab Perimeter 269
None No Insulation 26-A1
Window
SLEEPING ZONE
Overhang
Left Fin Right Fin
#
Exterior Shade Type
SHGC
Hgt.
VVd.
Len.
Hgt.
LExt
.
REA Dist Len Hgt Dist Len Hgt
1
Bug Screen
0.76
8.0
6.0
1.0
1.0
2.0
2.0
2
Bug Screen
0.76
5.0
5.0
1.0
1.0
2.0
2.0
3
Bug Screen
0.76
5.0
3.0
1.0
1.0
2.0
2.0
4
Bug Screen
0.76
2.0
3.0
1.0
1.0
2.0
2.0
5
Bug Screen
0.76
4.6
2.6
1.0
1.0
2.0
2.0
6
Bug Screen
0.76
2.0
2:0
1.0
1.0
2-0
2.0
7
Bug Screen
0.76
5.5
- 4.0
1.0
1.0
2.0
2.0
8
Bug Screen
0.76
5.3
4.0
1.0
1.0
2.0
2.0
9
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0
10
Bug Screen
0.76
2.0
2.0
•1.0
1.0
2.0
` 2.0
11
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0.
12
Bug Screen
0.76
5.0
4.0
1.0
1.0
2.0
2.0
13
Bug Screen
0.76
8.0
6.0
1.0
1.0
2.0
2.0
14
Bug Screen
0.76
8.0
6.0 .
1.0
1.0
2.0
2.0
15
Bug Screen
0.76
6.0
50
-71.0
1.0
2.0
2.0
16
Bug Screen
0.76
6.0
. 5.0
r 1.0
1.0
2.0
2.0
17
Bug Screen
0.76
6.0
5.0
1.0
1.0
2.0
2.0
18
Bug Screen
0.76
" 2.0
3.0
1.0
1.0
2.0
2.0
19
Bug Screen
0.76
8.0
6.0
1.0
.1.0
2.0
2.0
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick.Heat Inside Condition Location/
Type 'of) fin.) Cap. Cond. R -Val. ' JA IV Reference Status Comments
PERIMETER LOSSES
Insulation <
Condition
Location/
Type Length
R -Val. Location JA IV Reference
Status
Comments
Slab Perimeter 269
None No Insulation 26-A1
New
SLEEPING ZONE
Slab Perimeter 305
None No Insulation 26-A1
New
LIVING ZONE
Run Initiation Time: 05/06/08 09:06:02 Run Code: 1210089962
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page:4 of 14
Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R
Steve Kessler 5/6/2008
Project Title Date
FENESTRATION SURFACES
#
Type
Area U -Factor' ' SHGCZ
True
Azm. Tilt
Cond.
Stat. Glazing Type
Location/
Comments
2Q
Window
Overhang
480 -0.34.0_NERr__QM _NFRC () _9.0_ New
Andersen Permashield
LIVING 70NF
21
Window
Rear
(E)
200.0 0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
22
Window
Rear
(E)
19.5 0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
23
Window
Rear
(E)
39.0 0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
24
Window
Rear
(E)
19.5 0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
25
Window
Right
(S)
24.0 0.340 NFRC 0_33 NFRC
180 90 New
Andersen Permashield
LIVING ZONE
26
Window
Right
(S,)
17.5 0.340 NFRC 0.33 _NFRC 180 90 New Andersen Permashield
LIVING ZONE
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 11613.
INTERIOR AND EXTERIOR SHADING
Window
Overhang
Left Fin Right Fin
#
Exterior Shade Type
SHGC
Hgt.
Wd.
Len. Hgt.
LExt.
REA Dist. Len. Hgt. Dist. Len. Hgt.
20
Bug Screen
0.76
8.0
6.0
1.0 1.0
2.0
2.0
21
Bug Screen
0.76
10.0
20.0
1.0 1.0
2.0
2.0
22
Bug Screen
0.76
6.5
3.0
1.0 1.0
2.0
2.0
23
Bug Screen
0.76
6.5
6.0
1.0 1.0
2.0
2.0
24
Bug Screen
0.76
6.5
3.0
1.0 1.0
2.0
2.0
25
Bug Screen
0.76
8.0
3.0
1.0 1.0
2.0
2.0
26
Bug Screen
0.76
5.0
3.5
1.0 1.0
2.0
2.0
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val. Location JA IV Reference Status Comments
Run Initiation Time: 05106/08 09.06.02 Run Code: 1210089962
L. EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page:5 of 14
Certificate Of Compliance: Residential (Part 3 of 4) CF -1 R
Steve Kessler 5/6/2008
Project Title Date
HVAC SYSTEMS
Heating Minimum Cooling Minimum Condition Thermostat
Location Type Eff Type Eff Status Type
HVAC UNIT 1
Central Furnace
93% AFUE
Split Air Conditioner
14.0 SEER New
Setback
HVAC UNITS 2&3
Central Furnace
93% AFUE
Split Air Conditioner
14.0 SEER New
Setback
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution
Syst. (Btu/hr)
(gal)
HVAC DISTRIBUTION
Loss (%) Ext.
A O Smith Water Products CTG -50- Small Gas No Pipe Insulation
_227—
2 37,000
50
New 0.62
n/a n/a
Duct
Duct Condition
Ducts
Location
Heating
Cooling
Location
R -Value Status
Tested?
HVAC UNIT 1
Ducted
Ducted
Attic
4.2 New
Yes
HVAC UNITS 2&3
Ducted
Ducted
Attic
4.2 New
Yes
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS
Rated
Tank
Energy
Tank Insul.
Water Heater
# in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution
Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext.
A O Smith Water Products CTG -50- Small Gas No Pipe Insulation
_227—
2 37,000
50
New 0.62
n/a n/a
Multi-Family Central Water Heating Details
Hot Water Pump Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
REMARKS
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Title/Firm: Stephen Nieto
Address: 78-120 Calle Estado Suite 206
La Quinta. CA 92253
Telephon 760-564-4707 Lic. #:
d d"I J
(sign e) (date)
Enforcement Agency
Name:
Title/Firm:
Address:
Telephone:
(signature) (date)
Documentation Author
Name: Stephen Nieto
Title/Firm: South West Concepts
Address: 78-115 Calle Estado, Suite 201
La Quinta, CA 92253
Teleph 760 564-4707
(si ture) (date)
Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R
Steve Kessler 5/6/2008
Project Title Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local
enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies
uaseu vn me auequacy or ine speciai jusuncation ana aocumentation suomittea. Plan I Field
The HVAC System "HVAC UNIT 1" must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Areas.
The HVAC System "HVAC UNITS 2&Y must meet all CEC Criteria for a Zonally Controlled system servinq only Livinq Areas.
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a
�..., r,. ,....`. w,...y apvlw.�..— ung a..u,u. vers canon nieuwua.
Plan
Field
The HVAC System "HVAC UNIT 1" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the
CF -4R.
The HVAC System "HVAC UNITS MY incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on
the CF -4R.
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page:7 of 14
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (•) below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE -
permit application documentation. N/A DESIGNER MENT
Building Envelope Measures
§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
❑X
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
§ 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor.
❑
❑
❑
§ 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
1. Masonry and factory -built fireplaces have:
❑
❑
❑
a. closable metal or glass door covering the entire opening of the firebox
❑
❑X
❑
b. outside air intake with damper and control, flue damper and control
❑
❑X
❑
2. No continuous burning gas pilot lights allowed.
❑
❑
❑
§ 150(0: Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
❑
❑
❑
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include
❑
❑
El
Form:
§ 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
❑
❑
❑
,1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
❑
❑
❑
Coefficient (SHGC), and infiltration certification.
❑
❑X
❑
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑
❑
ISpace Conditioning, Water Heating and Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262
Page:8 of 14
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (`) below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE -
applicable. N/A DESIGNER MENT
ISpace Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑ ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or
tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed ❑
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support
platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions
in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
❑ ❑
n ❑
❑ ❑
❑ ❑
❑ ❑
❑ ❑
❑ ❑
■❑
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ❑ ❑
b. Cover for outdoor pools or outdoor spas.
❑ ❑ ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑ ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ❑ ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ 0 ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric
and have an output frequency no less than 20 kHz.
§ 150(k)1: HIGHEFFICACY OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
LU ll
1:1 El El
luminaire has ins a ed HIDla
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑ Fx] ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑ ❑
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are controlled
❑ ❑ ❑
by an occupant sensor that complies with Section 119(d) that does not turn on automatically or have an always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑X ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ ❑ ❑
same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 680
locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d).
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262
Page:9 of 14
Residential Kitchen Lighting Worksheet WS -5R
Steve Kessler 5/6/2008
Project Title Date
At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires
as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately.
Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens.,
. High Efficacy
Luminaire Type High Efficacy? Watts Quantity Watts Other Watts
(1) 28w Compact Fluorescent 2D Elec Yes X ' No 28.0 x 5 = 140 or
1 57w Compact Fluorescent Tri /Quad Tpin Yes X No 62.0 X'. 4 - 248 or
WeCRecessed Incandescent Yes No X 60.0 x 3 or 180
Yes No x_ or
Yes No x = or
Yes No x = or
Yes No x or
Yes No x = or
Yes No x - or
Yes No z _ or
Yes No x _ or
Yes No x = or
Yes No - x = " or
Yes No x - or
Yes No x - or
` Yes No
x - or
Yes No x = or
Yes No x = or
Yes No X = or
Yes' No x = or
Total A: 388 B: 180
COMPLIES IF A z B YES ® NO El.
x
4
F-EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page: 10 of 14
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Steve Kessler 5/6/2008
SYSTEM NAME FLOOR AREA
HVAC UNIT 1 2,407
Number of Systems
1
Heating System
Output per System
56,000
Total Output (Btuh)
56,000
Output(Btuh/sgft)
23.3
Cooling System
Output per System
47,500
Total Output (Btuh)
47,500
Total Output (Tons)
4.0
Total Output (Btuh/sgft)
19.7
Total Output (sgft/Ton)
608.1
Air System
CFM per System
1,545
Airflow (cfm)
1,545
Airflow (cfm/sgft)
0.64
Airflow (cfm/Ton)
390.3
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
Note: values above given at ARI conditions
EATING SYSTEM PSYCHROME
26.0 of 68.5 of
Outside Air
0 cfm
Supply Fan
1545 cfm
68.5 of
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
Sensiblel
Latent
CFM
I Sensible
1,084
20,092
2,458
820
27,075
0
2,414
2,499
0
0
0
0
0
0
0
0
0
2,414
2,499
24 920 2 458 F7 32,073
Bryant 556AN048-B/350MAV048060 33,459 9,324 56,000
Total Adjusted System Output 33,459 9,324 56,000
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am
Cream Temperatures at Time of Heatina Peak)
68.5 of 0 102.5 of
Heating Coil
h Return Air Ducts 'I
Supply Air Ducts
101.0 of
ROOMS
70.0 of
COOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak
111.0 / 77.6 of 79.5 / 65.5 of 79.5 / 65.5 of 59.1 / 58.0 of
O Supply Air Ducts
Outside Air
0 cfm Supply Fan Cooling Coil 60.6 / 58.5 of
1545 cfm 50.2% R.H. ROOMS
79.5/65.5 of 78.0 / 65.0 of
h Return Air Ducts �1
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page: 11 of 14
1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Steve Kessler 5/6/2008
SYSTEM NAME FLOOR AREA
HVAC UNITS 2&3 2,759
Number of Systems
2
Heating System
Output per System
56,000
Total Output (Btuh)
112,000
Output (Btuh/sqft)
40.6
Cooling System
Output per System
36,000
Total Output (Btuh)
72,000
Total Output (Tons)
6.0
Total Output (Btuh/sgft)
26.1
Total Output (sgft/Ton)
459.8
Air System
CFM per System
1,200
Airflow (cfm)
2,400
Airflow (cfm/sgft)
0.87
Airflow (cfm/Ton)
400.0
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
Note: values above gi
HEATING SYSTEM
26.0 OF
Outside Air
0 cfm
68.8 OF
at ARI conditions
68.8 OF
Supply Fan
2400 cfm
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
I Sensible
Latent
CFM
I Sensible
1,687
30,032
2,70
F 746
32,915
0
3,608
3,038
0
0
0
0
0
0
0
0
0
3,6081
3,038
37,2 2 70 38 992
Bryant 556AN036-E/350MAV036060 49,945 15,188 112,000
Total Adjusted System Output49,945 15,188 112,000
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm I W12 am
RICS (Airstream Temperatures at Time of Heating Peak)
68.8 OF ® 112.70F
Heating Coil
N Return Air Ducts 4
Supply Air Ducts
111.5°F
ROOMS
70.0 OF
DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak
111.0/77.6°F 79.4/65.7°F 79.4/65.8°F 59.9/58.7°F
O Supply Air Ducts
Outside Air
0 cfm Supply Fan Cooling Coil 61.3 / 59.3 OF
2400 cfm 51.1% R.H. ROOMS
79.4/65.7 F
° 78.0 / 65.3 OF
h Return Air Ducts �
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page: 12 of 14 1
ROOM LOAD SUMMARY
PROJECT NAME
Steve Kessler
DATE
5/6/2008
SYSTEM NAME
HVAC UNIT 1
FLOOR AREA
2,407
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
SLEEPING ZONE
SLEEPING ROOMS
1
1,084
20,092
2,458
1,084
20,092
2,458
820
27,075
I
'
1
PAGE TOTAL 1 1,084 20,092 2,458 820 27,075
TOTAL 1,084 20,092 2,458 820 27,075
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262Page: 13 of 14
ROOM LOAD SUMMARY
PROJECT NAME
Steve Kessler
DATE
5/6/2008
SYSTEM NAME
HVAC UNITS 2&3
FLOOR AREA
2,759
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LIVING ZONE
LIVING AREA
1
1,687
30,032
2,701
1,687
30,032
2,701
746
32,915
PAGE TOTAL 1 1,687 30,032 2,701 746 32,915
TOTAL 1 1,687 30,032 2,701 746 32,915
EnergyPro 4.4 by EnergySoft User Number: 5970 Job Number: 262 Page: 14 oFT7771
TITLE 24 REPORT
Title 24 Report for:
Steve Kessler
53-664 Via Strada
La Quinta, CA 92253
DATE !2 /6-2 BY
Project Designer:
Stephen Nieto
78-120 Calle Estado Suite 206
La Quinta, CA 92253
760-564-4707
CITY OF LA QUINTA
BUILDING & SAFETY DEPT.
APPROVED
FOR CONST CTION
Report Prepared By:
Stephen Nieto
South West,Concepts
78120 Calle Estado, Suite 206
La Quinta, CA 92253
(760) 564-4707.
Job Number:
a 262
Date:
2/5/2007
The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is
authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4.3 by EnergySoft Job Number: 262 User Number - 5970
j
TABLE OF CONTENTS
Cover Page 1
Table of Contents 2
Form CF -1 R Certificate of Compliance 3
Form MF -1 R Mandatory Measures Summary 8
Form WS -5R Residential Kitchen Lighting 10
HVAC System Heating and Cooling Loads Summary 11
Room Load Summary 13
EnergyPro 4.3 by EnergySoft Job Number: 262 User Number: 5970
Certificate Of Compliance: Residential (Part 1 of 4) CF -1 R
Steve Kessler
5,166
ft2
Existing Floor Area:
2L512Q07
Project Title
Raised Floor Area:
0
ft2
Date
_5.3-664 Via S.trad.a-I a_Qllinta
ft2
Average Ceiling Height:
11.0
Project Address
Number of Dwelling Units:
1.00
Call_ Wood- 6.62
Building Permit #
Snuth WesLCDn.Cep_ts
Wall_ Wood_ 542
_0_0-6.9 -&21 _R -0.O_
(760) 564-4707
Doo>- None 48_
Documentation Author
_27.090
Wall Wood 3Z8_
Telephone
plan Check/Date
_EnergyPrn
Compliance Method
94_ 90.
Wall_ Wood 8.58
15
Climate Zone
-180_ 90
Field Check/Date
TDV
Standard
Proposed
Compliance
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
0.91
0.52
0.38
Space Cooling
46.11
43.76
2.35
Fans
6.54
6.28
0.26
Domestic Hot Water
4.97
5.95
-0.98
Pumps
0.00
0.00
0.00
Totals
58.53
56.52
2.01
Percent better
Building Type: [jd Single Family
[:)Multi Family
Building Front Orientation:
Fuel Type:
Fenestration:
❑ Addition
❑ Existing + Add/Alt
(W) 270 deg
Natural Gas
Area: 793 ft 2 Avg. U: 0.38
Ratio: 15.4% Avg. SHGC: 0.35
Total Conditioned Floor Area:
5,166
ft2
Existing Floor Area:
n/a
ft2
Raised Floor Area:
0
ft2
Slab on Grade Area:
5,165
ft2
Average Ceiling Height:
11.0
ft
Number of Dwelling Units:
1.00
Call_ Wood- 6.62
Number of Stories:
1
Wall_ Wood_ 542
BUILDING ZONE INFORMATION # of
Zone Name Floor Area Volume Units
HVAC UNIT 1 2407 25 274 047
HV2 756 _3J-728 X53_
OPAQUE SURFACES
Insulation
Act.
Type Frame Area
U -Fac. Cay. Cont.
Azm. Tilt
Will Wood 72
_0.0.&90_91_B-00_-13590
Wall_ Wood_ _294
_0_069_ R-21 R-0 0
270 90
/.all_ Wood 8Q8_
_0..0.6.9 _R-21 R-0 0
2_9.0
Wall Wood _202
0_0.69 R-21 R-0 0
90__90
Call_ Wood- 6.62
O_0,6.9_ R_21 R-0.0
180 9Q
Wall_ Wood_ 542
_0_0-6.9 -&21 _R -0.O_
X7.0_ 9Q
Doo>- None 48_
_0_5.0.0_ -None_ _B -Q 0_
_27.090
Wall Wood 3Z8_
-0_06.9 R-21 _B-0 0 0_90
Wall_ Wood X02
0..069 R-21 _R-0 0
94_ 90.
Wall_ Wood 8.58
0_0.69 _R21 R-0 0
-180_ 90
Zone Type
Sleeping
Living
Gains Condition
Y / N Status JA IV Reference
Thermostat Vent
Type Hgt. Area
-SleepingStaL 2 -n1a
-
Iivin fat_ _2 _n1a
Location / Comments
New 0.9_A6
3LEEPJNG_Z0NF
New 09-A6
S.LEEPJN.G_ZONE
New 09-A6
SLEEPING ZONE
New 09-A6
SLEEPJNGZONF
New 09-A6
SLEEEI&GZONE
New -O9 -A6
New 28-A4
LUJUG7-O.NE
LLVINGZONE
New 09-A6
LLV_LN.G7QNF
New 09-A6
LLVIN.GZONE
New 09-A6
C, 70
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Paae:3 of 14 1
Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R
Steve Kessler 2/5/2007
Project Title Date
FENESTRATION SURFACES
# Type Area U -Factor' SHGC2
True
Azm. Tilt
Cond.
Stat. Glazing Type
Location/
Comments
1
Mftdow-Rear (SES 48 0 -340 _NERC -QM -NER0 x.3.5 90 New
Andersen Permashield
SLEEPING ZONE
2
Window
Front
(W)
25.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
SLEEPING ZONE
3
Window
Front
(W)
15.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
SLEEPING ZONE
4
Window
Front
(W)
6.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
SLEEPING ZONE
5
Window
Left
(N)
12.4 0.990 116-A 0_74 116-B
0
90 New
Single Non Metal Clear
SLEEPING ZONE
6
Window
Left
(N)
4.0 0.340 NFRC 0_33 NFRC
0
90 New
Andersen Permashield
SLEEPING ZONE
7
Window
Left
(N)
22.0 0.340 NFRC 0_33 NFRC
0
90 New Andersen Permashield
SLEEPING ZONE
8
Window
Left
(N)
21.3 1.280 116-A 0.80 116-B
0
90 New
Single Metal Clear
SLEEPING ZONE
9
Window
Left
(N)
4.0 0.340 NERC0 33 NFRC
0
90 New Andersen Permashield
SLEEPING ZONE
1Q
Window
Left
(N)
4.0 0,34 NFRC 0_33 NFRC
0
90 New
Andersen Permashield
SLEEPING ZONE
11
Window
Left
(N)
4.0 0.340 NFRC 0_33 NFRC
0
90 New
Andersen Permashield
SLEEPING ZONE
12
Window
Rear
(E)
20.0 0.340 NFRC 0_33 NFRC
90
90 New
Andersen Permashield
SLEEPING ZONE
1a
Window Rear (E) 48.0 0.340 NFRC 0.33 NFRC 90 --9k New
Andersen Permashield
SLEEPINGZONE
14
Window
Right
(S)
48.0 0.340 NFRC 0_33 NFRC
180
90 New
Andersen Permashield
SLEEPING ZONE
15
Window
Front
(W)
30.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
LIVING ZONE
16
Window
Front
(W)
30.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
LIVING ZONE
17
Window
Front
(W)
30.0 0.340 NFRC 0_33 NFRC
270
90 New
Andersen Permashield
LIVING ZONE
18
Window
Left
(N)
6.0 0.340 NFRC 0_33 NFRC
0
90 New
Andersen Permashield
LIVING ZONE
19
Window
Left
(N)
48.0 0.340 NFRC 0_33 NFRC
0
90 New Andersen Permashield
LIVING ZONE
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either
from NFRC or Table 11613.
1.0
INTERIOR AND EXTERIOR SHADING
Area Thick. Heat Inside
(sf) (in.) Cap. Cond. R -Val.
JA IV Reference
Condition
Status
Location/
Comments
PERIMETER LOSSES
Insulation
Condition
Window
Type
Overhang
R -Val. Location
Left Fin Right Fin
#
Exterior Shade Type
SHGC
Hgt.
Wd.
Len.
Hgt.
LExt.
RExt. Dist. Len. Hgt. Dist. Len. Hgt
1
Bug Screbn
0.76
8.0
6.0
1.0
1.0
2.0
2.0
2
Bug Screen
0.76
5.0
5.0
1.0
1.0
2.0
2.0
3
Bug Screen
0.76
5.0
3.0
1.0
1.0
2.0
2.0
4
Bug Screen
0.76
2.0
3.0
1.0
1.0
2.0
2.0
5
Bug Screen
0.76
4.6
2.6
1.0
1.0
2.0
2.0
6
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0
7
Bug Screen
0.76
5.5
4.0
1.0
1.0
2.0
2.0
8
Bug Screen
0.76
5.3
4.0
1.0
1.0
2.0
2.0
9
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0
10
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0
11
Bug Screen
0.76
2.0
2.0
1.0
1.0
2.0
2.0
12
Bug Screen
0.76
5.0
4.0
1.0
1.0
2.0
2.0
13
Bug Screen
0.76
8.0
6.0
1.0
1.0
2.0
2.0
14
Bug Screen
0.76
8.0
6.0
1.0
1.0
2.0
2.0
15
Bug Screen
0.76
6.0
5.0
1.0
1.0
2.0
2.0
16
Bug Screen
0.76
6.0
5.0
1.0
1.0
2.0
2.0
17
Bug Screen
0.76
6.0
5.0
1.0
1.0
2.0
2.0
18
Bug Screen
0.76
2.0
3.0
1.0
1.0
2.0
2.0
19
Bug Screen
0.76
8.0.
6.0
1.0
1.0
2.0
2.0
THERMAL MASS FOR HIGH MASS DESIGN
Type
Area Thick. Heat Inside
(sf) (in.) Cap. Cond. R -Val.
JA IV Reference
Condition
Status
Location/
Comments
PERIMETER LOSSES
Insulation
Condition
Location/
Type
Length
R -Val. Location
JA IV Reference
Status
Comments
Slab Perimeter
269
None No Insulation
26-A1
New
SLEEPING ZONE
Slab Perimeter
305
None No Insulation
26-A1
New
LIVING ZONE
Run Initiation Time: 02/05/07 11.21.13 Run Code: 1170703273
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page•4 of 14
Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R
Steve Kessler 2/5/2007
Project Title Date
FENESTRATION SURFACES
# Type Area U -Factor' SHGCZ
True
Azm. Tilt
Cond.
Stat. Glazing Type
Location/
Comments
20.
-Window--Left--(N)-
--A8-0-
_0 340 NERC -U3 NERC 0_ -9.0_ New fln.denw Lee.rmashield 1LVING_ZO-NF
21
Window
Rear
(E) 200.0
0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
22
Window
Rear
(E) 19.5
0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
23
Window
Rear
(E) 39.0
0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
24
Window
Rear
(E) 19.5
0.340 NFRC 0_33 NFRC
90 90 New
Andersen Permashield
LIVING ZONE
25
Window
Right
(S) 24.0
0.340 NFRC 0_33 NFRC
180 90 New
Andersen Permashield
LIVING ZONE
26
Window
Right
(S,) 17.5
0.340 NFRC 0.33 NFRC 180 90 New Andersen Permashield
LIVING ZONE
0.76
6.5
3.0
1.0
1.0 2.0
2.0
25
Bug Screen
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING
Window
Overhang
Left Fin Right Fin
#
Exterior Shade Type
SHGC
Hgt.
Wd.
Len.
Hgt. LExt.
REA. Dist. Len. Hgt. Dist Len Hgt
20
Bug Screen
0.76
8.0
6.0
1.0
1.0 2.0
2.0
Ti
Bug Screen
0.76
10.0
20.0
1.0
1.0 2.0
2.0
22
Bug Screen
0.76
6.5
3.0
1.0
1.0 2.0
2.0
23
Bug Screen
0.76
6.5
6.0
1.0
1.0 2.0
2.0
24
Bug Screen
0.76
6.5
3.0
1.0
1.0 2.0
2.0
25
Bug Screen
0.76
8.0
3.0
1.0
1.0 2.0
2.0
26
Bug Screen
0.76
5.0
3.5
1.0
1.0 2.0
2.0
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick.Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES
Type L
Insulation
R -Val. Location
Condition Location/
JA IV Reference Status Comments
Run Initiation Time: 02/05/07 11.21.13 Run Code: 1170703273
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page:5 of 14
Certificate Of Compliance: Residential _ (Part 3 of 4) CF -1 R
Steve Kessler
Duct Condition
Ducts
Location Heating Cooling Location
R -Value Status
2/5/2007
HVAC UNIT 1 Ducted Ducted Attic
Project Title
Yes
HVAC UNITS 2&3 Ducted Ducted Attic
4.2 New
Date
Cap.
Condition Factor
HVAC SYSTEMS
System Name Type Distribution
Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext
A O Smith Water Products CTG -50- Small Gas No Pipe Insulation
-22
2 37,000
Heating
Minimum
Cooling
Minimum
Condition
Thermostat
Location
Type
Eff
Type
Eff
Status
Type
HVAC UNIT 1
Central Furnace
93% AFUE
Split Air Conditioner
14.0 SEER
New
Setback
HVAC UNITS 2&3
Central Furnace
93% AFUE
Split Air Conditioner
14.0 SEER
New
Setback
HVAC DISTRIBUTION
Duct
Duct Condition
Ducts
Location Heating Cooling Location
R -Value Status
Tested?
HVAC UNIT 1 Ducted Ducted Attic
4.2 New
Yes
HVAC UNITS 2&3 Ducted Ducted Attic
4.2 New
Yes
Hydronic Piping Pipe Pipe Insul.
System Name Length Diameter Thick.
WATER HEATING SYSTEMS
Rated
Tank
Energy
Tank Insul.
Water Heater
# in Input
Cap.
Condition Factor
Standby R -Value
System Name Type Distribution
Syst. (Btu/hr)
(gal)
Status or RE
Loss (%) Ext
A O Smith Water Products CTG -50- Small Gas No Pipe Insulation
-22
2 37,000
50
New 0.62
n/a n/a
Multi -Family Central Water Heating Details
Hot Water Pump . Hot Water Piping Length (ft) Add 1/2"
Control # HP Type In Plenum Outside Buried Insulation
4
REMARKS
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
Designer or Owner (per Business & Professions Code)
Name:
Title/Firm: Stephen Nieto
Address: 78-120 Calle Estado Suite 206 _
Miw#
(signature)
Enforcement Agency
Name:
Title/Firm:
Address:
Telephone:
(signature)
(date)
Documentation Author
Name: Stephen Nieto
Title/Firm: South West Concepts
Address: 78120 Calle Estado, Suite 206
La Quinta CA 92253
,Telephone: 760 564-4707 _
Z-�—o
(signature) (date)
STAMP
Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R
Steve Kessler 2/5/2007
Project Title Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local enforcement
agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the
ruequacy or ine 5peciai fusuncauon ana aocumentaaon suomntea. Plan I Field
The HVAC System "HVAC UNIT 1" must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Areas.
The HVAC System "HVAC UNITS 2&Y must meet all CEC Criteria for a Zonally Controlled system serving only Living Areas.
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC-
••rr••,•"• �••• r�.. 4-1 ua—tj — aNNIvvcu aoauny dnuwr venncduan rneUMU15 ana mu5t oe reporEeo on ine L,?--4Kplan
installation certificate.
Field
The HVAC System "HVAC UNIT 1" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the
CF -4R.
The HVAC System "HVAC UNITS 2&Y incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on
the CF -4R.
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page:7 of 14 1
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE -
permit application documentation. N/A DESIGNER MENT
Building Envelope Measures
§ 150(a):
Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
❑
❑
§ 150(b):
Loose fill insulation manufacturer's labeled R -Value:
❑
❑
❑
§ 150(c):
Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
❑X
❑
apply to exterior mass walls).
❑
❑
❑
§ 150(d):
Minimum R-13 raised Floor insulation in framed Floors or equivalent U -factor.
❑
❑
❑
§ 150(e):
Installation of Fireplaces, Decorative Gas Appliances and Gas Logs.
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
1. Masonry and factory -built fireplaces have:
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
a. closable metal or glass door covering the entire opening of the firebox
❑
❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
b. outside air intake with damper and control, Flue damper and control
❑
❑X
❑
❑
2. No continuous burning gas pilot lights allowed.
❑
❑
❑
§ 150(f):
Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual.
❑
❑
❑
§ 150(g):
Vapor barriers mandatory in Climate Zones 14 and 16 only.
❑
❑
❑
§ 150(1):
Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
❑
entirely in conditioned space.
§ 118: Insulation
specified or installed meets insulation installation quality standards. Indicate type and include
E]
El
1:1CF-6R
❑
Form:
Page:8 of 14
§ 116-17:
Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls.
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
Coefficient (SHGC), and infiltration certification.
❑
❑R
❑
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑
❑
Space Conditioning, Water Heating and Plumbing System Measures
§ 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission.
❑
❑
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or RCCA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
❑
§ 1500): Water system pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
❑
having an installed thermal resistance of R-12 or greater.
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external
❑
❑
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value.
3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
0
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation.
❑
❑
❑
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262
Page:8 of 14
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent
compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated
into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory
measures whether they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not
ENFORCE -
applicable.
N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,
❑ ❑ ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh
or tape shall be used. _.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than
❑ ❑ ❑
sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and
support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause
reductions in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑ ® ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers.
❑ ❑ ❑
5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating
❑ ❑ ❑
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑ ❑ ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ ❑ ❑
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
❑ ❑ ❑
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ❑ T ❑
b. Cover for outdoor pools or outdoor spas.
❑ ❑ ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑ ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ❑ ❑
burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ® ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are
electric and have an output frequency no less than 20 kHz.
§ 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ ❑ ❑
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined❑
x❑ ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑ ❑
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are
❑ ❑ ❑
controlled by an occupant sensor that complies with Section 1) 9(d) that does not turn on automatically or have an
always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑X ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ ❑ ❑
same lot shall be high efficacy luminaires (not including lighting around swimming pools/water features or other Article
680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section
119(d).
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262
Page:9 of 14
• h
Residential Kitchen Liqhtinq Worksheet WS-5R
Steve Kessler 2/5/2007
Project Title Date
At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires
as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. t
Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens.
High Efficacy
Luminaire Type High Efficacy? -• Watts . Quantity Watts Other Watts
1 57w Com act Fluorescent Tri /Quad 4 in Yes X No 62.0 x 6 = 372 or
Recessed Incandescent Yes No X 60.0 x 2
or 120
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x _ or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Yes No x = or
Total A: 372 B: 120
COMPLIES IF Az B YES X❑ NO ❑
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page: 10 of 14
HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Steve Kessler 2/5/2007
SYSTEM NAME FLOOR AREA
HVAC UNIT 1 2,407
ENGINEERING CHECKS
Number of Systems
1
Heating System
Output per System
56,000
Total Output (Btuh)
56,000
Output (Btuh/sgft)
23.3
Cooling System
Output per System
47,500
Total Output (Btuh)
47,500
Total Output (Tons)
4.0
Total Output (Btuh/sgft)
19.7
Total Output (sgft/Ton)
608.1
Air System
CFM per System
1,545
Airflow (cfm)
1,545
Airflow (cfm/sgft)
0.64
Airflow (cfm/Ton)
390.3
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
ote: values above given at ARI conditions
:ATING SYSTEM PSYCHROMETRICS
26.0 of 68.4 of 68.4 of
Outside Air
0 cfm
Supply Fan
1545 cfm
68.4 of
COOLING
111.0 / 77.6 of
Outside Air
0 cfm
79.6/65.8 of
LOAD
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
Sensible
Latent
I CFM
I Sensible
1,204
21,728
3,026
870
28,579
0
2,611
2,638
0
0
0
0
0
0
0
0
0
2,6111
2,638
26,949 3,026 33,855
Bryant 556AN048-B/350MAV048060 33,108 9,918 56,000
Total Adjusted System Output33,108 9,918 56,000
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am
'earn Temaeratures at Time of Heatina Peak)
102.5 of
Heating Coil
K Return Air Ducts `{
of Cooli
79.6 165.8 of 79.6 / 65.9 of 59.5 / 58.3 of
Supply Fan Cooling Coil
1545 cfm
h Return Air Ducts 4
Supply Air Ducts
100.8 of
ROOMS
70.0 of
I
Supply Air Ducts
61.0 / 58.9 OF
51.2% R.H. ROOMS
78.0 / 65.3 of
I
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page:11 of 14 1
1HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY
PROJECT NAME DATE
Steve Kessler 2/5/2007
SYSTEM NAME FLOOR AREA
HVAC UNITS 2&3 2,759
Number of Systems
2
Heating System
Output per System
56,000
Total Output (Btuh)
112,000
Output (Btuh/sgft)
40.6
Cooling System
Output per System
36,000
Total Output (Btuh)
72,000
Total Output (Tons)
6.0
Total Output (Btuhlsgft)
26.1
Total Output (sgft/Ton)
459.8
Air System
CFM per System
1,200
Airflow (cfm)
2,400
Airflow (cfmisgft)
0.87
Airflow (cfm/Ton)
400.0
Outside Air (%)
0.0
Outside Air (cfm/sgft)
0.00
Total Room Loads
Return Vented Lighting
Return Air Ducts
Return Fan
Ventilation
Supply Fan
Supply Air Ducts
TOTAL SYSTEM LOAD
COIL COOLING PEAK
COIL HTG. PEAK
CFM
I Sensiblel
Latent
CFM
I ensible
1,828
31,907
3,35
787
34,639
0
3,834
3,197
0
0
0
0
01
0
0
0
0
3,8341
3,197
39,575 3,35 41,034
Bryant 556AN036-E/350MAV036060 49,561 15,844 112,000
Total Adjusted System Output 49,561 15,844 112,000
(Adjusted for Peak Design Conditions)
TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am
Note: values above given at ARI conditions I L-
JEATING SYSTEM PSYCHROMETRICS (Airstream Tei
26.0 of 68.7 of 68.7 of n 112,60F
Outside Air
0 cfm
Supply Fan
2400 cfm
68.7 of
111.0/77.6OF 79.5/66.0
Outside Air
0 cfm
79.5/66.0 of
Heating Coil
Tem
Heatina Pea
h Return Air Ducts '4
79.5/ 66.0 of 0 60.1 / 59.0 of
0
Supply Fan
2400 cfm
Cooling Coil
h Return Air Ducts 4
Supply Air Ducts
111.3 of
ROOMS
70.0 of
Supply Air Ducts
61.6 / 59.5 of
51.9% R.H. ROOMS
78.0 / 65.5 of
EnergyPro 4.3 by EnergySoft User Number: 5970 Job Number: 262 Page: 12 of 14
ROOM LOAD SUMMARY
PROJECT NAME
Steve Kessler
DATE
2/5/2007
SYSTEM NAME
HVAC UNIT 1
FLOOR AREA
2,407
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
SLEEPING ZONE
SLEEPING ROOMS
1
1,204
21,728
3,026
1,204
21,728
3,026
870
28,579
PAGE TOTAL 1,204 21,728 3,026 870 28,579
TOTAL 1 1,204 21,728 3,02]6[::;1:: 28,579
EnergyPro By EnergySoft User Number: User Job Number: 262 Page: 13 of 14
ROOM LOAD SUMMARY
PROJECT NAME
Steve Kessler
DATE
2/5/2007
SYSTEM NAME
HVAC UNITS 2&3
FLOOR AREA
2,759
ROOM LOAD SUMMARY
ROOM COOLING PEAK
COIL COOLING PEAK
COIL HTG. PEAK
ZONE NAME
ROOM NAME
Mult.
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LATENT
CFM
SENSIBLE
LIVING ZONE
LIVING AREA
1
1,828
31,907
3,351
1,828
31,907
3,351
787
34,639
PAGE TOTAL 1 1,828 31,907 3,351
TOTAL 1,828 31,907 3,351
787
34,639
787
34,639
EnergyPro By EnergySoft User Number: User Job Number: 262 Page:14 of 14