08-1119 (RER)P.O. BOX 1504,- i ^' VOICE(760) 777-7012
78-495 CALLE TAMPICO FAX (760) 777-7011
,! LA QUINTA, CALIFORNIA 92.253 BUILDING & SAFETY DEPARTMENT INSPECTIONS (760) 777-7153
• BUILDING PERMIT
_ Date: 7/15/08
Application Number: 000-1:119 -r. { Owner:
Property Address: 25S_ VIA SIN PRISA GORDON & SHARON • SALMON
APN: 772-390-010- - - 50-255 VIA SIN PRISA
Application description: REMODEL —RESIDENTIAL LA QUINTA, CA 92253
Property Zoning: LOW DENSITY RESIDENTIAL
Application valuation: 100000
Contractor:
Applicant: Architect or Engineer:. HAR,-BRO INC
2750 SIGNAL PARKWAY/sem
SIGNAL HILL,.CA 9 7
\ (562)528-8000
�•1 Lic. No.: 2584.1
-------------------------------=-------------- ---- --- --- -97 -`----------------
LICENSED CONTRACTOR'S DECLARATION - - - ..-WORKER'S COM 1611 NDATIO - -
Ihereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with I hereby affirm under penalty of perjury one of the followin ions:000CCC//////�
Section 7000) of Division 3 of the Business and Professionals Code, and my License is in full force and effect. I have and will maintain a certificate of consent o ure for work ation, as provided
License Class: B License No.: 258441 for by Section 3700 of the Labor Code, for th perf nce of 6 hich this permit is
��((�'� -- nn issued. U
ate: 7 Contractor. .� Q _ SIS (/V ` - I have and will maintain workers' compensation insurance, a requi y Section 3700 of the Labor
Code, for the performance of the work for which th permit i ' sued. My workers' compensation
OWNER-BUILDER DECLARATION insurance carrier and policy number are: %� '
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law. for the Carrier ZURICH AMERICAN Policy Number WCC 7147
following reason (Sec. 7031..5, Business and Professions Code: Any city or county that requires a permit to _ I certify that, in the performance of the work for which this permit is issued, I shall not employ any
construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the person in any manner so as to become subject to the workers' compensation laws of California,
permit to file a signed statement that he or she is licensed pursuant to the provisions,of the Contractor's State and agree that, if I should become subject to the workers' compensation provisions of Section
License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or 3700 of the L or Code, I shall forthwith comply with those provisions.
that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section,7031.5 by ,,, /1
any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars (55001.: e: / Applicant: `L•-�i , V
1 _ I 1, as owner of the property, or my employees with wages as their sole compensation, will do the work, and
the structure is not intended or offered for sale (Sec. 7044, Business and Professions Code: The WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL, AND SHALL
Contractors' State License Law does'not apply to an owner of property who builds or improves thereon, SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND
and who does the work himself or herself through his or her own employees, provided that the' - DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN
improvements are not intended or offered for sale. If, however, the building or improvement is sold within SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES.
one year of completion, the owner-builder will have the burden of proving that he or'she did not build or
improve for the purpose of sale.). APPLICANT ACKNOWLEDGEMENT -
(_ )- I, as owner of the property, am exclusively contracting with licensed contractors to construct the project (Sec. IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the
.7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of conditions and restrictions set forth on this application.
property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed 1 . Each person upon whose behalf this application is made, each person at whose request and for °
pursuant to the Contractors' State License Law.). - - whose benefit work is performed under or pursuant to any permit issued as a result of this application,
1 _ 1 I am exempt under Sec. B.&P.C. for this reason the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City
of La Quinta, its officers, agents and employees for any act or omission related to the work being
performed under or following issuance of this permit.
Date: Owner: - - 2. Any permit issued as a result of. this application becomes null and void if workis not commenced
within 180 days from date of issuance of such permit, or cessation of work for,180 days will subject -
- CONSTRUCTION LENDING AGENCY permit to cancellation. -
. I hereby affirm under penalty of perjury that there is a construction lending agency for the performance of the I certify that I have read this application and state that the above information incorrect. I agree to comply with all
work for.which this permit is issued (Sec. 3097, Civ. C.).. -city and county ordinances and state laws relating to building construction, and hereby authorize representatives
• ' _ of this count o enter upon th bove-mentioned property for inspection urpos
- Lender's Name:
D gnature (Applicant or Agentl:;
_ . Lender's Address: -
LQPERMIT r - -
Application Number' 08-00001119
Permit ELECT -.ADD/ALT/REM
Additional desc..`.
Permit Fee 140.20 Plan Check
Fee
35.05
Issue Date Valuation
. .
0
Expiration Date 1/1,1/09
Qty Unit`Charge Per,
Extension
BASE FEE
15.00
3577.00 0350ELEC NEW RES - 1 OR 2
FAMILY
125.20
Permit ... BUILDING PERMIT
Additional desc .
Permit Fee . . . 639.50 ` Plan Check
Fee._
415.68
Issue Date . . Valuation
100000
'Expiration Date 1/11/09
Qty, Unit Charge Per
Extension
BASE FEE
414.50
50.00 4.5000 THOU BLDG 50,001-100,00,0
225.00
Permit ' MECHANICAL
Additional desc .
Permit Fee 63.00 Plan Check
Fee
15.75
Issue Date Valuation
. . . .
0
Expiration Date 1/11/09
Qty Unit Charge. Per
Extension
' BASE FEE
15.00
1.00 9.0000 EA MECH APPL REP/ALT/ADD
9.00
5.00 6.5000 EA MECH VENT FAN
32.50
1.00 6.5000 EA MECH EXHAUST HOOD
----------------------------------------------------------------------------
6.50
Permit . . . PLUMBING
Additional desc ..
Permit Fee . . 24.00 Plan Check,Fee..
6.00
Issue Date Valuation
0
Expiration Date 1/11/09
Qty Unit Charge Per.
Extension
BASE FEE
15.00
1.00 6.0000 EA PLB FIXTURE
6.00
1.00 3.0000 EA PLB WATER INST/ALT/REP'
3.00
----------------- ---------------------------------------------------------
Special Notes and Comments
FIRE DAMAGE REPAIR 2/3 OF EXISTING ROOF ..
LQPERMTT
Application Number 08-00001119
---------------. -------------
Special Notes and Comments ----
----------------
WITH LIKE-MATERIALS,FRAMING,TRUSS
REPLACEMENT AND REPAIR, MECH AND ELEC.
REPLACEMENT PER APPROVED PLANS
Other Fees . . . ENERGY REVIEW
FEE
41.57
STRONG MOTION
(SMI) - RES
10.00
Fee summary Charged Paid
Credited
Due
---------- ---------- ----------
Permit Fee Total- 866.70 .00
----------
.00
866.70
Plan Check Total. 472.48 00
.00
472.48
Other Fee Total 51.57 .00
.00
51.57
Grand Total- 1390.75 .00
.00
1390.75,,
LQPERMTT
Bin # Il, l
City Of La QUint'a
Bttidiing & Safety Divislon
P.O. Box 1504, 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #
rr
' I i
Project Address: V(� I
A. P. Number: ,
Owner's Name: oVZON �, SNARoN N_VXC)J4
Address: 602-56 y O A 511A VIZI5�
Legal Description: �
Contractor:
Address: tf
City, ST, Zip: L1\ QUI KTA �►'Z253
Tel h n -
Project Description:
City, ST, Zip:
Joel p
Telephone:
s.c Vis,: <:
State Lic. # :
City Lie. M.
Arc Eng , Designer:
Address:
City, ST, Zip: vGq t a 'T 2-:97�!
''?
:<<: ;:>::?:?`:•:?:»> <::<;.
Telephone: .L :y:...:...•:::.:.s: nr�
P �0 N —021 �:«•�:....:a,;,.<.. ?,:
State Lic. #:i>>:: ''?'' > "%>:..=.:.:.::....•..
Construction Type: Occupancy:
Project tYPa (circle one): New Add'n Alter a ai Demo
Name of Contact Person:
Sq. FL:
*Stories:
# Units:
Telephone # of Contact Person: 01v —D ► Z
Estimated Value of Project: Bd ry O D
APPLICANT: DO NOT WRITE BELOW THIS LINE
#
Submittal
Req'd
Recd
0E n
PERMIT FEES
Sets
aPian
Plan Check submitte
em Amount
Structural Cales.
Reviewed, ready for tio�AY 2 9
Ian Check Deposit
Truss Calls.
. Called Contact Pers CAW I Ian Check Balance.
Tide 24 Calcs.
Plans picked up Y onstrucdon
Flood plain plan
Plans resubmitted 5 Mechanical
Grading plan
2' Review, ready fo corrections/is ue Electrical
Subcontactor List
Called Contact Perso Plumbing
Grant Deed
Plans picked up
S,M,I,H.O.A.
Approval
Plans resubmitted GradingIN
HOUSE:-
'`" Review, ready for correctionsfissueDeveloper Impact Fee
AL4(
Planning Approval
Called Contact PersonA.I.P.P. ,
Pub. Wks. Appr
Date of permit issue
School Fees
Permit Fees
7�z 015VIR -1-0 L)CFQiz�q
�PP��ace
ftrl G fRou (DG &V,5PV6bRs RbPOO OJ coI)or710, a� R002 x15>rNS
9Naqo2 t36LT Uo(,U DOW.) S)pqps p(unp�Ns
? R�Oru S I`62. Tv 1240 B0 &,UU
Gr- PP' -0u Pop- Pepo,1()
0
a0
N
O
�
N
Q
M
�M
l
Jco
CITY OF LA QUINTA
PLAN CHECK CORRECTION LIST
Hadley EngineersJuly 11,2008
(919) 446-0712
PLAN CHECK NO. 08-1119 SECOND CHECK/ APPROVED
ADDRESS. 50-255 Via Sin Prisa OCCUPANCY R -3/U
SCOPE OF WORK Fire Damage TYPE -OF -CONST. VB
(Structural Review Only) ,
The submitted •plans and specifications have been reviewed by the VCA CODE GRoup. In our '
professional opinion, the plans are in substantial conformance with the building 'codes and
regulations adopted by the CITY OF LA QUINTA'and the State•of California Amendment.
APPROVAL FOR A BUILDING PERMIT IS 'HEREBY RECOMMENDED SUBJECT TO, "
OBTAINING APPROVALS/CLEARANCES FROM ALL APPLICABLE, CITY .s
DEPARTMENTS, AGENCIES,.AND ASSOCIATIONS:
Plans checked by: Hue C. Luu, P.E. �+
' _VCA CODE GROUP.
2200 W Orangewood Ave, Ste ,155
Orange, CA 92868
` (714) 3 63 -4700 ext. VCA File No. LQ -20992.
:.
TITLE 24 REPORT
Title 24 Report for:
Fire .Restoration for the Salmon Residence
50255 Via Sin Prisa
La Q u i nta, CA 92253 s
"....�. QUINTA
CITfi
Y Of: sOEV DEPT.
ev PP�� ED
Project Desi er: FORSTR CTION
J g z -
Hadley Enginee rte► ��
13584 Country Cree
Yucaipa, CA 92399
(909).446-0712
Report Prepared By:
Vincent Miranda
A. D.E. -Consulting
370 W. 6th Street, Suite 210
San Bernardino, CA 92401
(909) 884-9484
0801=0237
Date:
3/24/2008
The EnergyPro computer program has been used to perforn'i the calculations summarized in this compliance report. This program has approval and is
4authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards.
This program developed by EnergySoft, LLC - www.energysoft.com.
EnergyPro 4:4 by EnergySoft Job Number: 0801-0237 User Number: 3854
V
+t
5.
Certificate Of Compliance: Residential
(Part 1 of 4) CF -1 R
Fir? E2estoration for the
Project Title
Sa_�n Residence
3,577
ft2
3/24/2008
Date
Via Sin Prisa
I a_Qttinta
ft2
Building Front Orientation: (N) 0 deg
Raised Floor Area:
_50255
Project Address
ft2
Fuel Type: Natural Gas
Slab on Grade Area:
Building Permit #
ADConsulting
Fenestration:
Average Ceiling Height:
(909) 884-9484
ft
_F_
Documentation Author
Number of Dwelling Units:
1.00
Telephone
Plan Check/Date
_F�vPro
Compliance Method
1
C A
Climate lone 15
Climate Zone
Field Check/Date
TDV
Standard
Proposed Compliance
Area
n/a
n/a
(kBtu/sf-yr)
Design
Design
Margin
Space Heating
1.09
1.56
-0.47
Space Cooling
66.11
63.54
2.58
Fans
9.11
8.74
0.37
Domestic Hot Water
8.04
8.04
0.00
Pumps
0.00
0.00
0.00
Totals
84.36
81.88
2.48
Percent better than Standard: 2.9%
I BUILDING COMPLIES - NO HERS VERIFICATION REQUIRED
I
Building Type: [j] Single Family ❑ Addition
Total Conditioned Floor Area:
3,577
ft2
❑ Multi Family Q Existing + Add/Alt
Existing Floor Area:
3,577
ft2
Building Front Orientation: (N) 0 deg
Raised Floor Area:
0
ft2
Fuel Type: Natural Gas
Slab on Grade Area:
3,577
ft2
Fenestration:
Average Ceiling Height:
10.4
ft
Area: 760 ft 2 Avg. U: 0.41
Number of Dwelling Units:
1.00
Ratio: 21.2% Avg. SHGC: 0.40
Number of Stories:
1
BUILDING ZONE INFORMATION '
# of Thermostat Vent
Zone Name Floor Area Volume
Cl 1-9 & F-9 161 15 657
CU -1 & F-1 1969 21 582
Units Zone Type Type
n 45 Cnnditinned Rathack
0.55 Conditioned Setback
Hgt.
2
2
Area
n/a
n/a
OPAQUE SURFACES Insulation Act.
Type Frame Area U -Fac. Cay. Cont. Azm. Tilt
Roof Wood 493 _n p25 R_38 R-0 0 n n
Wall Wood 54 0.060 R-13 R-7.0 315 gn
Wall Wood 36 0.060 R-13 R_7.0. 90 90
Wall Wood 191 n oso R-13 R-7.0 _QqQ
Roof Wood 1,199 0.025 R_38 R-0.0 0 n
Wall Wood 54 0.060 R-13 R-7.0 135 90
Wall Wond m n nso R-13 R-7.0 An An
Wall Wood 416 0.060 R_13 R-7 0 0 gn
.Wall Wood 84 0060 R-13 R-7.0 180 go
Wall Wood 223 0060 -R-10 R-7.0 270 90
Wall Wnnd 394 _0 060 R-13 R_7 0 4.5 90
Roof Wood 1 qF;9 0 025 R_38 R-0 0 n n
Wall Wood 10 0060 R-13 R-7.0 gn go
Wall Wood 395 0.060 R-13 R-7.0 180 90
Wall Wood 258 _0_06.0 -B13 R-7.0 270 AQ
Gains Condition
Y / N Status JA IV Reference Location / Comments
EnergyPro 4.4 by EnergySoft User Number: 3854 Job Number: 0801-0237 Page:3 of 10 1
Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R
Fire Restoration for the Salmon Residence 3/24/2008
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U -Factor' SHGC2 Azm. Tilt Stat. Glazinq Tvr)e Comments
1_
__Window
Front
(N)
9.0 0.390 NFRC 0-37 NERC 0 SO Existing Dual Metal Low -E
Bedroom Areas
2
Window
Front
(N)
52.0
0.390 NFRC 0_37 NFRC
0
90 Existing Dual Metal Low -E
Bedroom Areas
3
Window
Left
(E)
52.0
0.390 NFRC 0_37 NFRC
90
90 Existing Dual Metal Low -E
Bedroom Areas
4
Window
Front
(N)
11.2
0.390 NFRC 0_37 NFRC
0
90 Existing Dual Metal Low -E
Bedroom Areas
5
Window
Front
(N)
11.2
0.390 NFRC 0_37 NFRC
0
90 Existing Dual Metal Low -E
Bedroom Areas
6
Window
Front
(N)
3.0
0.580 116-A 0_65 116-B
0
90 Existing Double Non Metal Clear
Bedroom Areas
7
Window
Front
(N)
3.0
0.580 116-A0.65, 116-B
0
90 Existing Double Non Metal Clear
Bedroom Areas
8
Window
Front
(N)
15.0
0.580 116-A 0.65 116-B
0
90 Existing Double Non Metal Clear
Bedroom Areas
9
Window
Front
(N)
21.0
0.580 116-A0.65 116-B
0
90 Existing Double Non Metal Clear
Bedroom Areas
1Q
Window
Rear
(S)
26.0
0.390 NFRC 0_37 NFRC 180
90 Existing Dual Metal Low -E
Bedroom Areas
11
Window
Right
(W)
81.0
0.390 NFRC 0_37 NFRC
270
90 Existing Dual Metal Low -E
Bedroom Areas
12
Window
Right
(W)
36.0
0.580 116-A 0_65 116-B
270
90 Existing Double Non Metal Clear
Bedroom Areas
Aa
Window
Front
(NEE)
24.0
0.390 NFRC 0.37 NFRC 45
90 Existing Dual Metal Low -E
living Area
14
Window
Left
(E)
12.0
0.390 NFRC 0_37 NFRC
90
90 Existing Dual Metal Low -E
Living Area
15
Window
Rear
(S)
118.0
0.390 NFRC 0_37 NFRC
180
90 Existing Dual Metal Low -E
Living Area
16
Window
Rear
(S)
52.0
0.390 NFRC 0_37 NFRC
180
90 Existing Dual Metal Low -E
Living Area
17
Window
Rear
(S)
24.0
0.390 NFRC 0_37 NFR .
180
90 Existing Dual Metal Low -E
Living Area
18
Window
Rear
(S)
24.0
0.390 NFRC 0_37 NFRC
180
90 Existing Dual Metal Low -E
Living Area
19
Window
Rear
(S)
25.00
399 NFRC0 37 NFRC 180
90 Existing Dual Metal Low -E
Living Area
1. Indicate source either from NFRC or Table 116A. 2. Indicate source eitherfrom NFRC or Table 1168.
INTERIOR AND EXTERIOR SHADING Window
# Exterior Shade Twe SHGC Hgt. Wd.
Overhang Left Fin
Len. Hgt. LExt. REA Dist. Len. Hgt.
Right Fin
Dist. Len. Hgt.
1 Bug Screen
0.76
2 Bug Screen
0.76
3 Bug Screen
0.76
4 Buq Screen
0.76
4.5
25
2.0
0.1 2.0
2.0
5 Bug Screen
0.76
4.5
2.5
2.0
0.1
2.0
2.0
6 Bug Screen
0.76
1.5
1.5
2.0
0.1
2.0
2.0
0.1
2.0 0
0.0
0.0
0
7 Bug Screen
0.76
1.5
1.5
2.0
0.1
2.0
2.0
0.0
0.0 0
0.1
2.0
0
8 Bug Screen
0.76
6.0
2.5
2.0
0.1
2.0
2.0
9 Bug Screen
0.76
6.0
3.5
6.0
0.1
6.0
6.0
0.1
2.0 0
0.0
0.0
0
10 Bug Screen
0.76
11 Bug Screen
0.76
9.0
9.0
2.0
0.1
2.0
2.0
0.1
6.0 0
0.0
0.0
0
12 Bug Screen
0.76
6.0
6.0
6.0
0.1
6.0
6.0
0.1
2.0 0
0.0
0.0
0
13 Bug Screen
0.76
8.0
3.0
2.0
0.1
2.0
2.0
14 Bug Screen
0.76
8.0
1.5
4.0
0.1
4.0
4.0
0.1
4.0 0
0.0
0.0
0
15 Bug Screen
0.76
10.0
11.5
10.0
0.1
10.0
10.0
16 Bug Screen
0.76
8.0
6.0
10.0
0.1
10.0
10.0
0.0
0.0 0
2.0
10.0
0
17 Bug Screen
0.76
8.0
3.0
2.0
0.1
2.0
2.0
18 Bug Screen
0.76
8.0
3.0
2.0
0.1
2.0
2.0
19 Bug Screen
0.76
5.0
5.0
4.0
0.1
4.0
4.0
2.0
2.0 0
2.0
2.0
0
THERMAL MASS FOR HIGH MASS DESIGN
Area
Thick. Heat
Inside
Condition
Location/
Type
(sf)
(in.) Cap.
Cond.
R -Val.
JA IV Reference
Status
Comments
PERIMETER LOSSES
Insulation
Condition
Location/
Type
Length
R -Val.
Location
JA IV Reference
Status
Comments
Slab Perimeter
50
None No Insulation
26-A1
Existing
Bedroom Areas
Slab Perimeter
120
None No Insulation
26-A1
Existing
Bedroom Areas
Slab Perimeter
100
None No Insulation
26-A1
Existing
Living Area
Run Initiation Time: 03/24/08 11:21:13 Run Code: 1206386473
EnergyPro 4.4 by EnergySoft User Number: 3854 Job Number: 0801-0237 Page:4 of 10
Certificate Of Compliance : Residential (Part 2 Of 4) CF -1 R
Fire Restoration for the Salmon Residence 3/24/2008
Project Title Date
FENESTRATION SURFACES
True Cond. Location/
# Type Area U-Factorl SHGCZ Azm. Tilt . Stat. Glazing Type Comments
2Q Window Right 42.0 o-390 NF$O 0_37 NFRC 270 q0 Existino Dual Metal Low -E Living Area
21 Window Right (W) 118.0 0.390 NFRC 0_37 NFRC 270 90 Existing Dual Metal Low -E Living Area
1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B.
INTERIOR AND EXTERIOR SHADING Window Overhanq Left Fin Right Fin'
# Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. WE—xi. Dist. Len. Hgt. Dist. Len. Hgt.
20 Bug Screen 0.76 7.0 6.0 4.0 0:1 4.0 4.0 0.0 0.0 0 0.1 10.0 0
Ti Bug Screen 0.76 10.0 11.5 4.0 0.1 4.0 4.0
THERMAL MASS FOR HIGH MASS DESIGN
Area Thick. Heat Inside Condition Location/
Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments
PERIMETER LOSSES Insulation Condition Location/
Type Length R -Val, Location JA IV Reference Status Comments
Run Initiation Time: 03/24/08 11:21:13 Run Code: 1206386473
EnergyPro 4.4 by Energysoft User Number: 3854 Job Number: 0801-0237 Page:5 of 10
WATER HEATING SYSTEMS
Water Heater
System Name Type Distribution
Rated
# in Input
Syst. (Btu/hr)
Tank
Cap.
(gal)
Energy
Condition Factor
Status or RE
Tank Insul.
Standby R -Value
Loss (%). Ext.
(E) Water Heater Small Gas No Pipe Insulation
Certificate Of Compliance : Residential
(Part 3 of 4)
CF -1 R
Fire Restoration for the Salmon Residence
3/24/2008
Project Title '
Date
HVAC SYSTEMS
Multi -Family Central Water Heating .Details
Hot Water Pump
Control # HP Type
Hot Water Piping Length (ft) Add 1/2"
In Plenum Outside Buried Insulation
Heating
Minimum
Cooling
Minimum Condition
Thermostat
Location
Type
Eff
Type
Eff Status
Type
CU -2 & F-2
Central Furnace
80% AFUE
Split Air Conditioner
12.0 SEER Existing
Setback
CU -1 & F-1
Central Furnace
80% AFUE
Split Air Conditioner
12.0 SEER Existing
Setback
HVAC -DISTRIBUTION
Duct
Duct Condition
Ducts
Location
Heating
Cooling
Location
R -Value Status
Tested?
CU -2 & F-2
Ducted
Ducted
Attic
8.0 New
No
CU -1 & F-1 -
Ducted
Ducted
Attic
8.0 New
No
Hydronic Piping
Pipe Pipe
Insul.
System Name
Length Diameter
Thick.
WATER HEATING SYSTEMS
Water Heater
System Name Type Distribution
Rated
# in Input
Syst. (Btu/hr)
Tank
Cap.
(gal)
Energy
Condition Factor
Status or RE
Tank Insul.
Standby R -Value
Loss (%). Ext.
(E) Water Heater Small Gas No Pipe Insulation
2 40,000
50
Existing 0.65
n/a n/a
Multi -Family Central Water Heating .Details
Hot Water Pump
Control # HP Type
Hot Water Piping Length (ft) Add 1/2"
In Plenum Outside Buried Insulation
REMARKS
COMPLIANCE STATEMENT
This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of
Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility.
The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality,
and building envelope sealing require installer testing and certification and field verification by an approved HERS rater.
+Designer or Owner (per Business & Professions Code) Documentation Author
Name: Name: Vincent Miranda
Title/Firm: •Hadley Engineering Title/Firm: A.D.E. Consulting
Address: 13584 Country Creek Court Address: 370 WAth Street, Suite 210
Yucaipa, CA 92399 'San Bernardi C 92401
Telephone: 909 446 0712 Lic. #: Tel h e: 909 -
O(ate)?
(signature) (sig tur) (date)
Enforcement Agency .
Name:
Title/Firm:
Address:
Telephone:
(signature) .(date)
Certificate Of Compliance : Residential (Part 4 of 4) CF -1 R
Fire Restoration.for the Salmon Residence 3/24/2008
Project Title . I a Date
Special Features and Modeling Assumptions
The local enforcement agency should pay special attention to the items specified in this checklist. These items require special
written justification and documentation, and special verification to be used with the performance approach. The local
enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies
uaseu on Me auequacy or Lne speciai fusuncauon ana aocumenwuon suomiaea. Plan Field
The Roof "R-36 Roof Attic" includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual.
7.
r ,
HERS Required Verification
Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a
HERS provider using approved testing and/or verification methods. Plan Field
Run Initiation. Time: 03/24/08 11:21:13 Run Code: 1206386473
EnergyPro 4'A by EnergySoft User Number: 3854 Job Number: 0801-0237 Page:7 of 10
x 4
Mandatory Measures Summary: Residential (Page 1 of 2) MF -1R
NOTE: Lowdse residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
• requirements from the Certificate of Compliance supercede the items marked with an asterisk (•) below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Check or initial applicable boxes or check NA'if not applicable and included with the
ENFORCE -
permit application documentation.
NIA
DESIGNER
MENT
Building Envelope Measures
§ 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling.
❑
.N
❑
§ 150(b): Loose fill insulation manufacturer's labeled R -Value:
❑
0
❑,
§ 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not
❑
0
❑
apply to exterior mass walls).
-
§ 150(d) :' Minimum R-1'3 raised floor insulation in framed floors or equivalent U -factor.
❑
❑
❑
§, 150(e): Installation of Fireplaces, Decorative Gas.Appliances and Gas Logs.
1. Masonry and factory -built fireplaces have:
a. closable metal or glass door covering the entire opening of the firebox
❑'
❑X
❑ '
.b. outside air intake with damper and control, flue damper and control
❑
❑X
❑
2..No continuous burning gas pilot lights allowed.
❑-"
❑X
❑
§ 150(0: Air retarding wrap installed to comply with.§151 meets requirements specified in the ACM Residential Manual.
❑
' ❑
- ❑
§ 150(g): Vapor barriers mandatory in Climate Zones 14 and, 16 only.
❑
❑
❑
§ 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor
❑
❑
❑
permeance rate no greater than 2.0 perm/inch.
§ 118: Insulation specified or installed meets insulation installation quality standards. Indicate type and include
El
❑
CF -6R Form:
§ 116-17: Fenestration'Products, Exterior Doors, and Infiltration/Exfiltration Controls.
1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage.
❑
❑X
❑
2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain
Coefficient (SHGC), and infiltration certification.
❑
El
El
3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed.
❑
❑X
❑
Space Conditioning, Water Heating and Plumbing System Measures
4.110-13: HVAC equipment, water heaters,•showerheads and faucets certified by the Energy Commission.
❑
❑X
❑
§ 150(h): Heating and/or cooling loads calculated in accordance with ASH RAE, SMAC NA or ACCA.
❑
❑
❑
§ 150(i): Setback thermostat on all applicable heating and/or cooling systems.
❑
❑X
-❑
§ 1500): Water system.pipe and tank insulation and cooling systems line insulation.
1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation
❑
❑
❑
having an installed thermal resistance of R-12 or greater. '
2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks'have R-12 external
❑
ET
❑
insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. .
3. The following. pipingis insulated according to Table 150-A/B or Equation 150-A Insulation Thickness:
1.'First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire
❑
- ❑X
❑
length of recirculating sections of hot water pipes shall be insulated to Table 150B.
2. Cooling system piping (suction,'chilled water, or brine lines), piping insulated between heating source and
❑
❑
❑
indirect hot water tank shall be insulated to Table 150-B and Equation 150-A.
4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.
❑
❑
❑
5. Insulation mustibe protected from damage, including that due to sunlight, moisture, equipment maintenance,
❑
❑
❑
and wind.
6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed •
❑
❑
❑
entirely in conditioned space.
7. Solar water -heating systems/collectors are certified by the Solar Rating and Certcation Corporation.
❑
❑
❑
EnergyPro 4.4 by EnergySoft User Number: 3854 Job Number:. 0801-0237
Page:8 of 10
Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R
NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance
requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit
documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether
they are shown elsewhere in the documents or on this checklist only.
DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not
ENFORCE -
applicable.
N/A DESIGNER MENT
Space Conditioning, Water Heating and Plumbing System Measures: (continued)
§ 150(m): Ducts and Fans
1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,
❑ ❑ ❑
605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of
R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system
that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements
of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or
tape shall be used.
2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than sealed
❑ ❑ ❑
sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support
platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions
in the cross-sectional area of the ducts.
3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive
❑ ❑X ❑
duct tapes unless such tape is used in combination with mastic and draw bands.
4. Exhaust fan systems have back draft or automatic dampers.
❑ 0 ❑
5. Gravity ventilating systems serving conditioned space have either automatic or r readily accessible, manually operating
❑ ® ❑
dampers.
6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment
❑ ❑X ❑
maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water
retardant and provides shielding from solar radiation that can cause degradation of the material.
7. Flexible ducts cannot have porous inner cores.
❑ ❑X ❑
§ 114: Pool and Spa Heating Systems and Equipment
1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the
❑ ❑ ❑
heater, weatherproof operating instructions, no electric resistance heating and no pilot light.
2. System is installed with:
a. At least 36" of pipe between filter and heater for future solar heating.
❑ ❑ ❑
b. Cover for outdoor pools or outdoor spas.
❑ ❑ ❑
3. Pool system has directional inlets and a circulation pump time switch.
❑ ❑ ❑
§ 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously
❑ ❑ ❑
burning pilot light (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr)
§ 118 (i): Cool Roof material meets specified criteria
❑ ❑ ❑
Lighting Measures
§ 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table
❑ ❑
150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric
and have an output frequency no less than 20 kHz.
§ 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C,
❑ ❑ ❑
luminaire has factory installed HID ballast.
§ 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined
❑ ❑ ❑
in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires,
provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires.
§ 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires.
❑ ❑ ❑
OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d).
§ 150(k)4: Permanently installed luminaires located other than in kitchens, bathrooms, garages, laundry rooms, and utility rooms
shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are controlled
❑ ❑ ❑ '
by an occupant sensor that complies with Section 119(d) that does not tum on automatically or have an always on option.
§ 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are
❑ ❑ ❑
certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals.
§ 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the
❑ ❑ ❑
same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 680
locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d).
§ 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147.
❑ ❑ ❑
Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146.
§ 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more
❑ ❑ ❑
dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d).
EnergyPro 4.4 by EnergySoft User Number: 3854 Job Number: 0801-0237
Page:9 of 10
Residential -Kitchen Lighting Worksheet WS -5R
Fire Restoration for the Salmon Residence 3/24/2008' '
Project Title Date
At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires
as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately.
Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens.
High Efficacy
Luminaire Type High Efficacy? Watts Quantity Wafts Other Watts
(2) 13w Compact Fluorescent Quad 2 Pin Yes X No 36.0 x 6 = 216 or ,
60w Surface Mount Incandescent. Yes No X 60A x 3 = or 180
Yes No x _ or
Yes No x = or
Yes No x = or
Yes No x _ or
Yes No x = or
Yes No x _ or
Yes No x = or
Yes No x = or
Yes No x= ;or.
Yes No x = r or
Yes No x = or
Yes No x _ or
Yes No x = or
Yes No x = or
YesNo x = or
- - Yes No X = or
Yes No x = or
Yes No x = or
Total A: 216 B: 180
COMPLIES IF Aa B YES FXI NO ❑
f
Energypro 4.4 by Energysoft User Number: 3854 Job Number: 0801-0237