Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
06-2132 (SFD)
9 P.O. BOX 15.04 78-495 CALLE TAMPICO LA QUINTA, CALIFORNIA 92253 Tjht 4 4 Q" BUILDING & SAFETY DEPARTMENT BUILDING PERMIT Application Number" (6 '0'0002T32 Property Address: 80801 VISTA LAZO APN: 762-250-017- - - Application description: DWELLING - SINGLE FAMILY DETACHED Property Zoning: LOW-DENSITY RESIDENTIAL Application valuation: 353220 Applicant: Architect or Engineer: 6L44 74wc.- V_ irk LICENSED CONTRACTOR'S DECLARATION I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter 9 (commencing with Section 70001 of Division 3 of the Business and Professionals Code, and my License is in full force and effect. License Class: License No.: NO . Date: Contractor: OWNER -BUILDER DECLARATION I hereby affirm under penalty of perjury that I am exempt from the Contractor's State License Law for the following reason (Sec. 7031 .5, Business and Professions Code: Any city or county that requires a permit to construct, alter, improve, demolish, or repair any structure, prior to its issuance, also requires the applicant for the permit to file a signed statement that he or she is licensed pursuant to the provisions of the Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division 3 of the Business and Professions Code) or tt that he or she is exempt therefrom and the basis for the alleged exemption. Any violation of Section 7031.5 by Y� any applicant for a permit subjects the applicant to a civil penalty of not more than five hundred dollars ($500).: I 1 1, as owner of the property, or my employees.with wages as their sole compensation, will do the work, and the structure is not intended -or offered for sale (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, (^ and who does the work himself or herself through his or her own employees, provided that the improvements are not intended or offered for sale. If, however, the building or improvement is sold within one year of completion, the owner -builder will have the burden of proving that he or she did not build or improve for the purpose of sale.). ( 1 1, as owner of.the property, am exclusively contracting with licensed contractors to construct the project (Sec. 7044, Business and Professions Code: The Contractors' State License Law does not apply to an owner of property who builds or improves thereon, and who contracts for the projects with a contractor(s) licensed pursuant to the Contractors' State License Law.). ( 1 I am exempt under Sec. , B.&P .for this reason z2 of C/— /Owner. CONSTRUCTION LENDING AGENCY I hereby affirm under penalty of perjury that there is'a'construction lending -agency for the performance of the • work for which this permit is issued (Sec. 3097, Civ. C.). Lender's Name: Lender's Address: LQPEPM1IT Owner: L&D STIRRETT P.O. BOX 621 SILVERDALE, WA 98383 (760)564-9581 Contractor: Owner VOICE '(760) 777-7012 FAX (760) 777-7011 INSPECTIONS (760) 777-7153 Date: 8/08/06 f AUG 14 2006 CITY OF LA QUINTA r ' WORKER'S COMPENSATION DECLARATION hereby affirm under penalty of perjury one of the following declarations: I have and will maintain a certificate of consent to self -insure for workers' compensation, as provided for by Section 3700 of the Labor Code, for the performance of the work for which this permit is issued. XI have and will maintain workers' compensation insurance, as required by Section 3700 of the Labor "Code, for the pe formance of the work for which this permit is issued. My workers' compensation p nc rri and policy number are: /-r,70 Carrier d �'•' ` O1 Policy Number I certify that, in the performance of the work for which this permit is issued; I shall not employ any person in any manner so as to become subject to the workers' compensation laws of California, and agree that, if I sh d become subject to the workers' compensation provisions of Section 3700 of the Labo od�l shall fo wit omply �thoses. at pplicanr. _ WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UN FUL, AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE, INTEREST, AND ATTORNEY'S FEES. APPLICANT ACKNOWLEDGEMENT IMPORTANT Application is hereby made to the Director of Building and Safety for a permit subject to the conditions and restrictions set forth on this application. 1 . Each person upon whose behalf this application is made, each person at whose request and for whose benefit work is performed under or pursuant to any permit issued as a result of this application, the owner, and the applicant, each agrees to, and shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents and employees for any act or omission related to the work being- - performed under or following issuance of this permit. 2. Any permit issued as a result of this application becomes null and void if work is not commenced within 180 days from date of issuance of such permit, or cessation of work for 180 days will subject permit to cancellation. I certify that I have read this application and state that the bove information is correct.* I agree to comply with all city and county ordinances and state laws relating to i din const ruc ' n, hereby orize representatives sof thh'i' _°unty to enter upon the above-mentioned ope ty r inspe n oses. DaD�✓ —d� �/" gnature (Applicant or Age Application Number . . . 06-00002132 Permit . . . BUILDING PERMIT Additional desc . Permit Fee . . . . 1528.50 Plan Check Fee 993..53 Issue Date . . . . Valuation 353220 Expiration Date. 2/04/07 Qty Unit Charge Per Extension BASE FEE 639.50 254.00, 3.5000 ---------------------------------------------------------------------------- THOU BLDG 100,001-500,000 889..00 1, Permit ELEC-NEW RESIDENTIAL Additional desc . Permit Fee .187.21 Plan Check Fee :. 46.80 Issue Date -Valuation 0 Expiration Date... 2/04/07 �c Qty Unit Charge Extension .,Per BASE FEE 15.00 3978.00 .0350 ELEC NEW RES - 1 OR 2. FAMILY 139.23. 899.00 -.0200- ELEC GARAGE OR NON-RESIDENTIAL- 17.98 1.00. 15.0000 EA ELEC TEMPORARY POWER POLE ,. 15.00 Permit MECHANICAL Additional desc . Fee -123.00 Plan Check Fee 30.75 ...Permit Issue Date Valuation . . 0 ' Expiration Date 2/04/07 ' y Qty Unit Charge Per Extension BASE FEE 15.00 3.00. 9.0000 EA MECH FURNACE <=100K 27:00 1.00'•, 9.0000 EA. MECH B/C <=3HP/100K BTU 9.00 ` 2.00 16.5000 EA MECH B/C >3-15HP/>100K-500KBTU 3300 5.00 6.5000 EA MECH VENT FAN 32.50 1.00. .6.5000 EP, MECH EXHAUST HOOD 6.50 f -. Permit . . . PLUMBING . Additional desc . Permit Fee. 210.00 Plan Check Fee 52.50 Issue Date Valuation 0 Expiration Date .' 2/04/07 Qty Unit Charge Per Extension BASE FEE 15.00 _ LQPERMIT Application Number . . 06-00002132 Permit . . . PLUMBING Qty Unit -Charge Per Extension 18.00 6.0000 EA PLB FIXTURE 108.00 1.00 15.0000" EA PLB BUILDING SEWER 15.00 5.00 6.0000 EA PLB ROOF DRAIN 30.00 .1.00 7.5000 EA PLB WATER HEATER/VENT 7.50 1.00 3.0000 EA PLB WATER INST/ALT/REP 3.00 1.00' 9.0000'EA PLB LAWN SPRINKLER SYSTEM 9.00 1.00 3.0000 EA PLB GAS PIPE 1-4 OUTLETS 3.00' 6.00 .7500 EA PLB GAS PIPE >.=5 4.50 1.00 15.0000 EA PLB'GAS METER .15.00 -.-----------------------------=--------------------------------------------- Permit GRADING PERMIT Additional desc. . Permit Fee 15.00 Plan Check Fee '.. .00. Issue Date Valuation . . 0 ry!` Expiration Date': 2/04/07 i - Qty Unit Charge Per Extension 1 - _ BASE FEE ---------------------------------------------------------------------------- 15.,00- Special Notes and Comments 3978 SF SFD.R-3 OCC. TYPR V -N CONSTRUCTION. 2001 CBC,CMC,CPC, 2004 'CEC, 2005 ENERGY CODES.. ****PERMIT DOES NOT INCLUDE BLOCK, WALLS, FENCES, SWIMMING POOLS, SPA, WATER FEATURES and BBQ'S** " Other Fees ART IN PUBLIC PLACES -RES 383.05' DIF COMMUNITY CENTERS -RES 74.00 DIF CIVIC CENTER.- RES 480.00 ENERGY REVIEW FEE 99.35 - DIF FIRE PROTECTION -RES 140.00 - DIF LIBRARIES -.RES 355.00 DIF PARK MAINT FAC - RES 22.00 DIF'PARKS/REC - RES 892.00 STRONG 'MOTION (SMI) - RES 35.32 . DIF STREET MAINT FAC -RES 67.00 DIF TRANSPORTATION - RES 1666.00 Fee summary Charged Paid Credited Due --------------------------------------------------------- Permit Fee Total 2063.71 .00 .00 2063.71 Plan Check Total 1123.58 ;750.00 .00 373.58 Other Fee Total 4213.72 .00. .00 4213.72 Grand Total 7401.01. 750.00 00 6651.01 LQPEffi1IIT 4 ' Building Address/¢ !Qa,� Owner OW Vt5rA- 'Z,4 zo P.O. BOX 1504 APPLICATION ONLY 78-495 CALLE TAMPICO A 170A LA QUINTA, CALIFORNIA 92253 Address City Zip Tel. 76o J� .i T <?�-z � S6 I Contractor p & Classif. Lic. # Arch., Engr., Designer eoxd el kG L-U—T •�1 �$ cG Address Tel City �,r� Zip State 90,9/ A<,h 2 r Iie ���}- `F2 Z_ 60 Lic. # 1 LICENSED CONTRACTOR'S DECLARATION \11 eby affirm that I am licensed under provisions of Chapter 9 (commencing with Section/of Division 3 of the Business and Professions Code, and my license is in full force a \improvement WNER-BUILDER DECLARATION I hey affirm that I am exempt from the Contractor's License Law for the ollowing reason:. 7031.5, Business and Professions Code: Any city or county will equi res, a permit ttruct, alter, improve, demolish, or repair any structure, prior to its f uance also requires licant for such permit to lila a signed statement that he is licen d pursuant to the provns the Contractor's License Law, Chapter 9 (commencing with coon 7000) of Division/ the usiness and Professions Code, or that he is exempt there and the basis for the aed a ption. Any violation o/Section 7031.5 by any applicant f a permit subjects the appint to a 'vil penalty of not more than five hundred dollars ($50 ❑ I, as oer of Ih roperty, or my employees with wages as their sole ompensation, will do the worknd the str cture is not intended or offered for sale. (Sec. 70 , Business and Profes- sions C: The Con ctor's License Law does not apply to an ow r of property who builds or improthereon a who does such work himself or through hi wn employees, provided that sucmprovement are not intended or offered (or sale. If, wever, the building or im- provemis sold withi ne year o/ completion, the owner -b der will have [he burden o/ proving t he did not bu or improve for the purpose o/ sale .❑ I, as oer of the prope am exclusively contracting with censed contractors to construct the proj. (Sec. 7044, Busr ss and Professions Code: T Contractor's License Law does notappan owner of prop who builds or improves ereon, and who contracts for such projectsth a contractors) lic sed pursuant to the Co rector's License Law.) O 1 am exempt under Sec. \ B. & P.C. for ytis reason Date Owner WORKER'S CO PEN TION DECLARATION I hereby affirm that I have a certificat o onsent to self -insure, or a certificate of Worker's Compensation Insurance, or a certified c thereof. (Sec. 3800, Labor Code.) Policy No. Company Copy is filed lor ity. ❑ C iiia copy is hereby furnished. ERTIF ATE OF EMPTION FROM KE 'COMPEN TION INSURANCE (This section need nmp ted if the perms 's for one hundred dollars ($100) valuation or less). I certify that in ance of the work f which this Permit is issued, I shall not employ any person iner so as to becomes ject to Workers' Compensation Laws of California. Date NOTICE TO APPLICafter making this Certifica of Exemption you should become subject to the Workmpensation provisions of I Labor Code, you must forthwith comply with such pror this permit shall be for revoked. CONSTRUCTION LENDING AG Cy /LendeN ereby a rm that there is a construction lending agency r the performance of the work ch this ermit is issued. (Sec. 3097, Civil Code.) 's N e 's dressis ' a building permit when properly filled out, signed and lidated, and is subject to i if work thereunder is suspended for 180 days. rtify that I have read this application and state that the abov information is correct. to comply with all city and county ordinances and state la relating to building uction, and hereby authorize representatives of this city to enter a above-mentioned yforinspection purposes. ure of applicant Dat Addresstate, Zip WHITE = BUILDING DEPARTMENT BUILDING: TYPE CONST. A.P. Number ?j� Z OCC. GRP. 7 Legal Description LoT 7 Ti� Project Description S 2�r�34 Sq. Ft. �' Q No. Size D Stories No. Dw. Units New Add ❑ Alter 0 Repair ❑ Demolition ❑ �� Flo - s'f y - 95�/ Estimated Valuation PERMIT AMOUNT Plan Chk. Dep. Plan Chk. Bal. Const. Mech. Electrical Plumbing S.M.I. Grading Driveway Enc. Infrastructure TOTAL REMARKS ZONE: BY:_ Minimum Setback Distances: Front Se Rear Set Side Str( Side Set FINAL DATE Issued by: Validated by:— Validation: YELLOW = APPLICANT )m �Wfrty2l INSPECTOR CITY OF L PINK = FINANCE 'Coachella, ra11ey Unified School District This Box For District Use Only . 83-733 Aslenue 55, Thermal, CA 92274 DEVELOPER. FEES PAID .(760)..,398-5909.— Fax (760) 398-1224 AREA: - AMOUNT .. LEVEL ONE AMOUNT: LEVELTWOAMOUNT: - MITIGATION AMOUNT: COMM/MD. AMOUNT: DATE: - RECEIPT: CHECK #: INITIALS: CERTIFICATE OF COMPLIANCE / (California Education Code 17620) Project Name: Lee.S�tirrett Date: 05/11/06. Owner's Name: Lee Stirrett Phone No. (760) 564-9581 • Project Address: 80801 _Vista Lazo, La Quinta, CA Project Description: 1 Single Family Dwelling APN: 762-250-017 Tract #: Lot #'s: Type of Development: Residential !XX Commercial Industrial Total Square Feet of Building Area: 3,978 sq. Ft. Certitication of Applicant/Owners: The person signing certifies that the. above information is correct and makes this statement.under . penalty of perjury and further represents that he/she is authorized to sign on behalf of the owner/developer. Dated: 05/11/06 Signature: SCHOOL DISTRICT'S REQUIREMENTS FOR THE ABOVE PROJECT HAVE BEEN OR WILL BE SATISFIED IN ACCORDANCE WITH ONE OF THE FOLLOWING: (CIRCLE ONE) Education Code Gov: Code Project Agreement Existing Not Subject to Fee 17620 65995 • Approval Prior to 1/1/87 Requirement Number of Sq.Ft. 3,978 sq. ft. . Amount per Sq.Ft. $ 2.63 Amount Collected $ 10,462.14 Building Permit Application Completed: Yes/No By: Carey M. Carlson, Asst. Supt.; Business Services Certificate issued by: Leticia C. Torres, Facilities Analyst Signatur <' i NOTICE OF 90 DAY PERIOD FOR PROTEST OF FEES AND STATEF FEES Section 66020 of the Government Code asserted by Assembly'Bill 3081, effective January 1, 1997, requires that this "District provide (1) a written notice to the project appellant, at the time of payment of school fees, mitigation payment or other, exactions ("Fees"), of the 90 -day period to protest the imposition of these Fees and (2) the amount of the fees. Therefore, in accordance with section 66020 of the Government code.and other applicable law, this Notice shall serve to advise you that the 90 -day protest period in regard to such Fees or the validity thereof, commences with the payment of the fees or performance of any other requirements as describedin'section 66020 of the Government code. Additionally, the amount of the fees.imposed is as herein set forth, whether payable at this time or in whole or in part prior to: issuance of a Certificate of Occupancy. As in the latter, the 90 days starts on—the date hereof. This Certificate' of Compliance is valid for thirty (30) days.from the date of issuance. Extension will be granted only for good cause, as determined by the School. District, and up to three (3) such extensions may be granted. At such time as this Certificate expires, if a building permit has not been issued for the project that is the subject of this Certificate, the owner will be reimbursed all fees that paid to obtain this Certificate of Compliance. , LT'c/mvdocs/devfees/certificate-ofconipliance form tablesTO USEAOC 1/16/03 T `py ORANGE COAST TITLE CO. •,PECORDING REQUESTED BY AND WHEN RECORDED MAIL TO: LEE A:'STIRRETT DIANNE L: STIRRETT P.O. Box 621' Silverdale, WA 98383 A.P.N..: 762-250-017-8 TRA #: O"U. - 07 Order No.: I RANT Y DOC a 2003-539588' 07/18/2003 08:004 Fee: 13.00 Page 1 of 3 Doe T Tax Paid Recorded.in Official Records - County of Riverside Gary L. Orso Assessor, County Clerk 8 Recorder III Hill 11111111 I IIIIII IIIIII IIII l M $ U PAGE SIZE DA PC NOCOR SMF MISc.. A R. L COPY LONG REFUND NCHG EXAM THE UNDERSIGNED GRANTOR(s) DECLARE(s) THAT DOCUMENTARY TRANSFER TAX IS: COUNTY 192.50 ('J [ X ] computed on full value of property conveyed, or [[ ]] computed on full value less value of liens or encumbrances remaining at time of sale, unincorporated area; ['X ] City of La Quinta , and FOR A VALUABLE CONSIDERATION, Receipt.of which is hereby acknowledged, 1(S ALAN AUSTIN, TRUSTEE.OF THE ALAN AUSTIN LIVING TRUST, DATED FEBRUARY 7, 2002 hereby GRANT(S) to LEE A. STIRRETT and DIANNE L. STIItRETT,. Husband and Wife as Community. Property the following described property in the City of. La Quinta, County of Riverside State of California;. See Exhibit "A" attached hereto and made a part hereof. In ; OBJ - THE ALAN AUSTIN- LIVING TRUST, DATED FEBRUARY 7, 2002 ALAN AUSTIN, TRUSTEE. C Document Date: June 25, 2003 r • STATE OF C IF RN )SS COUNTY OF ) ( /` . On before me, A L Z_G per ally appeared A-14-y'- personally -1it-,ti ersonall known to'me P Y ) to be the persono whose name/are subscribed to the within instrument and acknowledged to me that a he/they executed the same in] her/their authorized capacit)(0 �} and that by i her/their signature(jrj on the instrument the person(�yor the entityup6n Uehalf of which the person(.4 acted, executed the instrument. WITNESS y hand and official se Signature �. MB E. LEGGET This area for official notarial seal. Cm.ft la 01286755. Nottsy Public Cdf nib .Mail Tax.Stateinen'ts to: SAME AS ABOVE . or Address Noted Below LIMITED POWER OF ATTORNEY Notice: This is an important document. Before signing this document, you should know these important facts. By signing this doc- ument, you are not giving up any powers or rights to control your finances and property yourself. In addition to your own powers and rights, you may be giving another person, your attorney-in-fact, broad powers to handle your finances and property. This lim- ited power of attorney may give the person whom you designate (your "attorney-in-fact") broad powers to handle your finances and property, which may include powers to encumber, sell or otherwise dispose of any real or personal property without advance notice to you or approval by you. Thepowers will not exist after you become disabled, or incapacitated. This document does not author- ize anyone to make medical or other health care decisions for you. If you own complex or special assets such as a business, or if there is anything -about this form thatyou•do not•understand, you should ask a lawyer,to explain this form to you before you; sign it. If you wish to change your, limited power of attorney, you must complete anew document and revoke this one., You may revoke' this document at any time by destroying it, by directing another person to destroy,it in your presence or by signing a written and dated.statement expressing your intent to revoke this'document. If you revoke this document, you should notify -your attorney-in- fact and any other.person to whom you have given a copy of the form." You also should notify all parties having custody of your assets.. These parties have no responsibility to you unless you actually notify them of the revocation. If your attorney-in-fact is your spouse and your marriage is'annulled, or you are divorced after signing.this document; this document may be invalid. Since some 3rd paes o eat ediI of permit use of.this document, it is advisable.to check in advance, if -possible, for any spe- cial re wire eria a, . atm ose You should sign this form.only if the attorney-in-fact you name is reliable, trustworthy and `�`� compefint to Tpaa eV9nn:W9i s: A i 3T�3 iYg ��1 H o aTxf—v, .. ns� 9"7 as Grantor, of S�if %J�Pc� �� Tfi&.Q/ T� , City of �J4 4:;i� C//n 1-19 State of G'�G:44o .tit .4 grant a limited and specific power of attorney to ZJ2/JE-5-7- �cZ of �=—.2T f•>l, 53,e ✓!sS Cityof ;State of go��O.e�i.4 to act as my attomey-in-fact and to have the full power and authority to.perform:only the following acts on my behalf to the same extent that I could do so personally: A.48u,1z:,elC; / -/' To ,r3 E esS��� �3� 7 c 7� d �.� ��,� < CDS My attorney-in-fact accepts this appointment and agrees to act in my best interest as he or she considers advisable. This grant of authori- ty shall include the power and authority to perform any incidental acts which may be reasonably required in order to perform the specific acts stated above. This limited grant of authority does not authorize my attomey-in-fact to make any decisions regarding my medical or health care. This power of attorney may be revoked by me at any time and.is automatically revoked on my death, incapacity; or incompetency. VI - ` � 1 -r— Y State of A 17H i NG ".'D 1) County of K � � t S A. On the grantor, e.,e ,4-. S / /�� / % -,came before me personally: and, under oa tat at he is th rs //desed in the above.document and -he/she signed the above document in my presence. NATALYA P.UGH Notary Signature NOTARY PUBLIC STATE OF WASHINGTON Public, , COMMISSION EXPIRES In and for the County of I l S /9 �. State of +� v/9 SN l N(`l�7/1/ NOVEMBER 29,2008 My commission ekpires: 1 oA/, �" 2_100S ' Seal ' 4 I accept my appointment as Attorney -in -Fact. l . v NO M A*RK i Geo -Engineers and Geologisfs a DBEJMBEISBE Company 780 N. 4th Street EI Centro, CA 92243 (760) 370-3000 (760) 337-8900 fax 77-948 Wildcat. Drive August 24, 2006 Palm Desert, CA 92211 (760) 360-0665 (760) 360-0521 fax Mr. Ernie Sanchez - Ernie Sanchez Construction 68-075 Via Domingo Desert Hot Springs, CA 92240 r Subject: Compaction Test Report Lot 17 Vista Lazo @ Lyons Gate La Quinta, California LCI Project No. LP06178 Dear Mr. Sanchez: Attached is a summary report of compaction tests made of fill within the building pad on the subject project site. Placement and compaction of fill soils were not observed by our firm. The compaction tests were made in conformance to In-place Density by Nuclear. Methods (ASTM 2922 & D3017) on August 18 , 2006 the test results are attached. LIMITATIONS The tests results summarized in this report present the moisture and density only at the locations . and elevations tested on the specified dates. The density testing was performed according to the generally accepted, geotechnical engineering standards of practice that existed in the Coachella Valley of Riverside County at the time the report was prepared. No opinion is expressed as to the uniformity of the material, compaction, nor`"adequacy of the material to perform as intended. No guaranty or warranty of the contractor's work is made or implied. The test locations are approximate, determined by pacing, and sighting from distinguishable field features. In doing our work, we have ' relied on topographic and surveying information provided by others. L Ernie Sanchez Construction LCI Project No •LP06178 Natural or imported soils (if any) at one foot or below existing pad grade, were not investigated, or tested by our firm. No warranty is made as to the stability/density of these soils. - With any manufactured prodi4ct, there are statistical variations in its uniformity and in the accuracy of tests used to determine its quality. As compared to other manufactured products, field placement of materials usually presents large statistical variations in its uniformity and in the accuracy of the test results. Thus, even with careful observation and testing, all parts of the constructed product may not comply with the job requirements: Therefore, our opinion means that there is only a statistically-'based probability that the densities obtained comply with the job requirements. This report is issued. with the understanding that the owner or his representative has the . responsibility to insure that this report.is submitted to the appropriate governing agencies. Please review the test results and contact our office with any questions or comments. Since rel yours, Landm rk Consultants, Ing Gre X I. Chandr P.E. jSt-7,r Pri lipal Engineer Landmark Consultants, Inc. } Summary of Laboratory Tests Maximum Density - Optimum Moisture (ASTM D1557) i Client: Ernie Sanchez Construction Project Name: Lot 17 Vista Lazo @ Lyons Gate • Project No.: LP06178 Y Max. Opt. Mat. Density Moisture Type Description USCS (pct) (%) t Brown silty sand SM 108.5 10.0 y Vi . Landmark Consultants, Inc. Compaction Test Summary Client: Ernie Sanchez Construction Project No.: LP06178 Project: Lot 17 Vista Lazo @ Lyons Gate Test of: House Pads -47':Field" Ws 1 1" Fie vcf)-.� —.4 >Max. 'Relative Note. 4o' rTest 1 08/18/06. Middle of pad 1 55.2 105.5. 13.7 108.5 97 P N 2 08/18/06 East side of pad 1 56.2 103.6 12.6 108.5 .95 P N 3 08/18/06 West side of pad 1 56.2 102.4 13.5- 108.5 94 T 'N R® -SURVEYING JEREMY D. CROSSWHfiE - LAND PLANNING C.E.O. / DESIGN CONSULTANT - ENGINEERING CONSULTING (909)890_ 43029 (909)3845987 - CAD DRAMNG e - DIGITAL TERRAIN MODELS 8-30-06 r County of Riverside ' Building and Safety Department w . 4080 Lemon St. 12`t Floor.- P.O. Box 1440 Riverside, Ca. 92502-1440. Attn: Building & Safety Department s 8>0- go U-3� L�Zo RE: Lee Stirrett residence I ; Project address: A.P:N 762-250-017 Permit number: Gentlemen: This letter shall confirm that the above site has been graded in accordance with the approved grading plan including: location of property comers for proper building location, completion of retaining walls, location and slope ratio for all manufactured slopes, construction of earth berms, installation of all drainage devices shown on the approved grading plans, location and elevation of building pads and positive building pad drainage. The placement of the building pad and the pad elevation as shown below are in conformance with the grading plans as approved by the County of Riverside. A field inspection has been performed and shows that the pad has been graded to be in conformance with the plans as follows:,. As -Built Elevation 'Pad Elevation Approved plan Elevation 556 ZS t { The pad. elevationand pad placement fall within the. standards of care for grading practices and tolerance. The building pad is suitable for building construction as related to the preceding items. Sincerely, + r l •. eR®�0"Ssr�� z cfsi%� Copy 1 JCM Inspections Copy 2 Project SuperintendentCopy 31 ,Governing Agency . ' Page _ of r • ..: `jJCM Inspections�q,: Y• , . .�• z 39725.Garand Lane Suite F Palm Desert: CA 92211 t INSPECTIONS �f_ "Phone: 760-345-5554_ - . Fax: 7606772-3895 INSPECTIONS WELDING INSPECTION, REPORT. 'Project Name: .� ." \ ' Project No: Date: Project Address: \, ,is , City: AWS _ "IBC .Title 24 QD1.3- , O' Shop Field I Client: ; Sub -Contractor: ❑ D1.4 Other ' General Contractor: Architect: C. L $ Structural Engineer: /^ 11-T ���r, e"�Gc � ��f"1G.rt.2�G. vJ•c�n . � a..� _ l�-�pC� `YrSSvelo,i�es, RS i Description of Work InspectedCoO 6�fl Weather: , W %n 4 s COJ2C' •e 'lib t,LM J wvNn u. Unresolved Items: ®Noris See Below. . Ca�uMnC Cin 1C3� r� oZ� � �. �-Qr: c��r : � ' . 3l0 5��: a. a �. ' Q � � �s :,.w •e��_ '�"o c d c , �o� 51 C 1' Cert on File Electrode Process' Welder Detail(s) Location/Comments ; Yes No Type Size C v�, �v��p�t►i v c' bes ✓ Ol $ y, Y \1 C VA \A",r7,(,-) �ece'�v I hereby certify that I have inspected all of the above work, unless otherwise noted, and to the best of my ability I have found this work'to comply with the approved plans, specifications _applicable building laws. Final report issued at project completion. J Inspector: Jack C. Millin ICC Certification No: •0842216-8� Contractor's.Representative: C. t P r Copy 1 JCM Inspections Copy 2 Project SuperintendentCopy 31 ,Governing Agency . ' Page _ of r �a CMLES D. MCNITECT. Architecture, Interiors, Space and Land Planning, and Structural Design Principle: Charles D. Garland, Architect Associate: Efraln Cardenas, Engineer,in Training ' 13 November 2006 + The City of La Quinta y • i Department of Building and Safety, 78.495 Calle Tampico La Quinta, CA 92253 - Project: The Single Family Residence for, = , Lee Stirrett at: , • . '80-801 Vista Lazo , La Quinta, California Regarding: Structural Construction Observation r ' To Whom It May Concern, I am a licensed. Architect in the State of Califomia'and the structural 'design.professional of record for the noted project's structural system. On 9 November 2006 1 visited the noted project site to perform code mandated structural observations prior to City's final framing inspection. `' I found the structure to be in substantial conformance with the structural design intent of the structural construction documents of record. . hereby state therefore, that the project is ready to wrap.. If you have any further questions regarding this project please do not hesitate in contacting me. . Sincerely,D. • - , , • ' •� - � ' t, No. 011.991 � Charles D. Galland Architect. 1®/,31 /2007 F'XP DATE , FOF cgll , LEGACY REPORT NER-216 Re -Issued March 1, 2004 ' ICC Evaluation Service, Inc.I Business/Regional Office ■ 5360 Workman Mill Road, Whittier, California 90601 ■ (562) 699-0543 www.icc-es.org Regional Office ■ 900 Montclair Road, Suite A, Birmingham, Alabama 35213 ■ (205) 5939800 Regional Office ■ 4051 West Flossmoor Road, Country Club Hills, Illinois 60478 ■ (708) 7932305 Legacy report on the 2000 International Building Code®, 2000 International Residential Code®, the 2002 Accumulative Supplement to the International Codes TM, the BOCA' National Building Code/1999, the 1999 Standard Building Code° and the 1997 Uniform Building CodeTm DIVISION 08 - DOORS AND WINDOWS Section 08620 - Unit Skylights VELUX AMERICA, INC. PO BOX 5001 GREENWOOD, SC 29648-5001 1.0 SUBJECT VELUX Roof Windows and Skylights 2.0 PROPERTY FOR WHICH EVALUATION IS SOUGHT Structural Performance 3.0 DESCRIPTION VELUX skylights are available in Model VS, VSE, FS, and FCM. Various outside frame dimensions are available, ranging in orientation from 15 5/16 inches (389 mm) in width to 55 inches (1397 mm) in length. The VELUX VS, VSE., and FS skylights are constructed of laminated nordic pine wood framing having a specific gravity of 0.47, encased on the exterior in No. 22 gage,aluminum cladding. The VS skylight is hinged at the top, and is crank operated to open. The VSE skylight is hinged at the top, and utilizes a production mounted electric chain to open. The FS skylight is a fixed skylight with integral frame. Refer to Figure 1 at the end of this reportfor typical cross sectional view of the VS, VSE, and FS skylights. Refer to Tables 1 and 2 at the end of this report for sizes and allowable loads for VS, VSE, and FS skylights. The VELUX FCM skylights are curb mounted fixed skylights constructed of an exterior roll -formed aluminum frame. Refer to Figure 3 at the end of this report for typical cross sectional view of the FCM skylights. Refer to Tables 3 and 4 at the end of this report for sizes and allowable loads for FCM skylights. VELUX skylights are available in two glazing options: Glazing Type 0074 consists of a V, -inch (3.0 mm) thick fully tempered glass exterior pane, a '/,,-inch (8.1 mm) to'/,s inch (11.1 mm) thick airspace, and a 1%, -inch (5.2 mm) laminated heat -strengthened glass interior pane. The laminated heat - strengthened interior pane consists of two plies of '/32 -inch -thick (2.2 mm) heat -strengthened glass laminated together with a 0.030 -inch (0.76 mm) polyvinyl butyral interlayer. Glazing Type 9910 consists of a'/e inch (3.0 mm) thick fully tempered glass exterior pane, a 5/16 -inch (8.1 mm) to'/,s inch (11.1 mm) thick airspace, and a 1/4 -inch (6.4 mm) laminated tempered glass interior pane. The laminated tempered glass interior pane consists of two plies of/e inch -thick (3.0 mm) fully tempered glass laminated together with a 0.030 -inch - thick (0.76 mm) polyvinyl butyral interlayer. 4.0. INSTALLATION VELUX skylights, Models VS, VSE, and FS with integral frame, shall be attached to roof framing members by L-shaped mounting brackets. Four brackets shall be used with Models FS skylights except size 112, which requires six brackets. Six brackets shall be used with all sizes of Model VS and VSE skylights, except four brackets are required for the 211/2 -inch by 381/, -inch (546 mm by 978 mm) and the 21'/, -inch by 27'/2 -inch (546 mm by 698 mm) VS and VSE skylight models. The brackets are zinc -chromate -coated steel angles 21/32 inches (51.6 mm) by 111/32 inches (34 mm) by 23/64 inches (52 mm), V6 inch (3.2 mm) in thickness. The bracket shall be positioned and premounted on the skylight frame with two No. 8 by 11/e inch -long (28.6 mm) stainless steel wood screws. At the jobsite, the bracket shall be bent over, tab inserted into the slot, and bent over to lock. See Figure 2. The other leg of the bracket shall be attached with three V/4 -inch long ring shank nails with 0.150 (3.8 mm) body diameter a 3/6(9.5 mm) diameter head. Where roof sheathing exceeds Y2 inch (12.7 mm) in thickness, fasteners attaching the brackets to the roof deck shall have sufficient length to penetrate wood structural framework a minimum of 3/4 inch (19 mm). The bracket shall be replaced if fractured or broken while being bent at the jobsite. No. 22 gage aluminum or copper flashing shall be attached over the fasteners at the perimeter of the skylights. See Figure 1 for typical installation details for Models FS, VS, and VSE (integral frames). Models FS skylights shall be installed in accordance with the VELUX Installation Instructions, No. V -USA -1171-1200, dated 2000. Model VS skylights shall be installed in accordance with the VELUX Installation Instructions, No. V -USA -1714-0201, dated 2001. Model VSE skylights shall be installed in accordance with the VELUX Installation Instructions, No. V -USA -1715- 0201, dated 2001. ICC -ES legacv reports are not to be construed as representing aesthetics or anv other attributes not specifically addressed, nor are they to be construed as an endorsement ofihe subject of the report or a recommendation jbr its use. There is no warranty by ICC Evaluation Service, Inc., express or implied as to amifinding or other matter in this. report, or as to anv product covered by the report. Im- VIZZNTO�' Copyright © 2004 Page 1 of 8 ItO& OPI Page 2 of 8 NER-216 Model FCM skylights, curb mounted, shall be mounted to site - built wood curbs by attaching the aluminum frame of the skylight to the site -built curb (evaluation of the attachment of the wood curb to the roof deck is outside the scope of this report). The wood curb shall have a minimum specific gravity of 0.42 and a minimum dowel bearing strength F. of 3350 psi. The skylights are attached to the curb with corrosion resistant fasteners (stainless steel wood screws) furnished by VELUX America Inc. The fasteners shall achieve full penetration into the wood curb. Tables 3 and 4 indicate the number of fasteners to be installed for each skylight model size. See Figure 3 for typical installation details or Model FCM skylights. Model FCM skylights shall be installed in accordance with the VELUX Installation Instructions, No. V -USA -1501-0202, dated 2002. In cases of conflict, installation details described in this report govern over the manufacturer's installation instructions. 5.0 IDENTIFICATION The VELUX skylights are identified with the name and address of the manufacturer, the glazing types and the ICC - ES Legacy report number (NER-216). The type of laminated pane shall be identified by a numerical code in the production code which is stamped into the stainless steel spacer between the panes, located in the upper left corner. The numerical code for the laminated heat - strengthened pane is 74 (VELTERM G'74) and the numerical code for the laminated tempered pane is 9910 (VELTERMG-9910). 6.0 EVIDENCE SUBMITTED 6.1 Manufacturer's brochure, 2002 edition (V -USA -1517- 0502 ©1997, 2002). 6.2 Manufacturer's installation instructions: 1. Models FS skylights: VELUX Installation Instructions, No. V -USA -1171-1200, dated 2000. 2. Model VS skylights: VELUX Installation Instructions, No. V -USA -1714-0201, dated 2001. 3. Model VSE skylights: VELUX Installation Instructions, No. V -USA -1715-0201, dated 2001. 4. Model FCM skylights: VELUX Installation Instructions, No. V -USA -1501-0202, dated 2002. 6.3 Reports of structural tests in accordance with ASTM E 330, prepared by Architectural Testing, Inc: 1. Report No. 01-39585.01, dated September 14, 2001, on Model VS 01 with 0074 glazing. 2. Report No. 01-39585.02, dated September 14, 2001, on Model VS 01 with 9910 glazing. 3. Report No. 01-37435.01, dated November 29, 2000, on Model VS 2000 with MVA 2000 brackets and 0074 glazing. 4. Report No. 01-35572.01, dated July 14, 2000, on Model VS with 0074 glazing. 5. Report No. 01-35573.01, dated July 13, 2000, on Model VS (2000) with 9910 glazing. 6. Report No. 01-36653.02, dated December 28, 2000, on Model FS with MVA 2000 brackets and 0074 glazing. 7. Report No. 01-35569.01, dated July 7, 2000, on Model FS with 0074 glazing. 8. Report No. 01-35570.01, dated July 7, 2000, on Model FS with 9910 glazing. 9. Report No. 01 -35575.01, dated July 14, 2000, on Model FCM with 0074 glazing. 10. Report No. 01-35576.01, dated July 17, 2000, on Model FCM with 9910 glazing. 11. Report No. 01-42322.02, dated November 4, 2003, on Model FCM with 0074 glazing. 6.4 Structural calculations submitted by Architectural Testing, Inc.: 1. dated December 27, 2000, revised October 28, 2001, signed and sealed by Allan N. Reeves. 2. dated July 27, . 2000, revised December 26, 2000, signed and sealed by Allan N. Reeves. 6.5 Letter prepared by Architectural Testing, Inc., dated August 25, 2003, signed and sealed by Allan N. Reeves. 7.0 CONDITIONS OF USE The ICC -ES Subcommittee for the National Evaluation Service finds that the VELUX-America Roof Windows and Skylights described in this report comply with, or are suitable alternatives to that specified in the 2000 International Building Code®, 2000 International Residential Code®, the 2002 Accumulative Supplement to the International CodesTA°, the BOLA® National Building Code/1999, the 1999 Standard Building Code®, and the 1997 Uniform Building Code T"" subject to the following conditions: 7.1 Roof windows and skylights are limited to loads indicated in this report. The allowable loads in Tables 1, 2, 3, and 4 shall not be increased for duration of load. 7.2 Installation conforms with the applicable code and this report. 7.3 For FCM skylights, the evaluation of the attachment of the wood curb to the roof deck is outside the scope of this report. 7.4 Installations of roof windows and skylights are limited to the following types of construction: 7.4.1 Types III, IV, and V construction in areas where the International Building Code is enforced. 7.4.2 Types III, V, and VI construction in areas where the Standard Building Code is enforced. 7A.3 Types III, IV, and V construction in areas where the Uniform Building Code is enforced. 7.4.4 Types 3, 4, and 5 construction in areas where the BOCA National Building Code is enforced. 7.5 The glazing of units set at an angle of less than 45 degrees from the horizontal shall be mounted at least 4 inches (102 mm) above the plane of the roof. Exception: In areas using the BOCA National Building Code, the Standard Building Code, or the International Residential Code curbs for skylights are not required on one or two family dwellings when the roof slope is a minimum of 3:12. 1 . 7.6 This report is subject to periodic reexamination. For information on the current status of this report, consult the ICC -ES website. Page 3 of 8 NER-216 Shtrgtes - 4' is required for proper Sheathing' - drainage whore snow .. ueaumulaton ie poseibie Underlayrtrent - . , 1 VEWX EDL Head Flaehteg VERTICAL CROSS SECTION Insulation Interior trim r - Headers or blocking as required per coda(s) ". r giti `I - Vapor bmrtere: N (Note: o Y ft be used to -ld motetuna �� ` • Horizontal ,soffit fining . VELUX EDL Sill Fla HORIZONTAL CROSS SECTION VELUX EDL •- Step Flashing Vnderloyment _ Llountinq bracket Vertical. all lining Sheathing ShInglett-. .. - • ' - _ Outside frame width Rough opening Rnlsh framing dimension . - Header Model VSE Sodding Note: Model VSE shown for illustration purposes. For SI: 1 inch =.25.4 mm Figure 1, Typical Installation Detail for Model VS; VSE and FS Skylights *THIS DRAWING IS FOR-ILLUSTRATION PURPOSES ONLY.. IT IS NOT INTENDED FOR USE AS A CONSTRUCTION DOCUMENT FOR THE PURPOSE OF DESIGN, FABRICATION OR ERECTION. h} r ' Page 4 of 8 x�" NER 216 . y ti ` 8rackat attached in Production with f_sp@ + 2 #6 x 1 1 A' Wood Screws. � r t % Y J MRS r Rotate Bracket Insert & bend 1 Tab over, r } s,k,4 h s p ir 3 - 9,1W Ring Shank Nails in deck. _ ) i R 4 41 Y- _ `' d.. i• L�...r ter r+� c � � . t. �' x� . # (�i � ,�•� Y Figure 2 c 7n # Y V °-Brackefto•Skyligfit.Frame Installation Detail'' 7. *THIS DRAWING IS FOR ILLUSTRATION'PURP,OSES ONLY. 'IT IS„NOT INTENDED FOR. USE AS A'CONSTRUCTION DOCUMENT FOR THE PURPOSE OF DESIGN, FABRICATION ERECTION. -OR Page 5 of 8 NER-216 EXTRUDED' , ALUMINUM FRAME . f STAINLESS � - t CONDENSATION f. STEEL WOOD • _ = GUTTER SCREW .7 (CONDENSATE WEEP HOLES ® CORNERS) ROUGH OPENING ^ UNDERLAYMENT STEP FLASHING I OUTSIDE CURB SHINGLE j ' 1-1/2" WOODEN CURB 2"X4" MINIMUM DECKING . Figure 3 Typical Installation Detail for Model FCM Skylights 'THIS DRAWING IS FOR ILLUSTRATION PURPOSES ONLY. IT ISNOT INTENDED FOR USE AS A CONSTRUCTION DOCUMENT FOR THE PURPOSE OF DESIGN; FABRICATION OR ERECTION. ` i Page 6 of 8 NER-216 Table 1— Models VS, VSE and FS f; Interior Pane - Laminated Tempered Pane (9910) Unit Size in Inches (and Model #) 155/,,,x463/,,(056)' Skylight,Model and Design Pressures (pounds per square foot) Venting Skylight VS (manual) Venting Skylight Fixed Skylight VSE (electric) FS Downward Wend Uplift NA NA Wind Uplift Downward Wind Uplift NA i NA NA NA 21%x27% 101 174 63 174 63 174 63 211/2 x 38'/2 104 123 37 123 37 123 37 21'/2 x 463/ 106- - 155 46 105. 40 155 46 21172 x 55 108 129 48 . 129 48 129 48 21'/2 x 70'/ 112 NA NA NA NA NA NA 235/16 x 23 9/16 (150) NA NA NA NA NA NA 235/ x46 3/ 156 NA NA NA NA NA NA .305/ x 305/ 302 NA NA NA NA NA NA 305/ x 38'/2 304 85 32 85 32 85 32 305/ x46 3/ 306 , 100 31 72 28 100 31 305/ x 55 308 89 27 89 27 89'- 27 443/ x 27'/2 601 81 25 81 25, 81 . 25 443/ x 46Y2 606 72 23, 72 23 72 23 47 5/ x 463/ 656 NA NA NA NA NA NA Page 7 of 8 )`;: s NER-216 Table 2 — Models VS, VSE and FS Interior Pane - Laminated Heat -Strengthened Pane (74) Unit Size in Inches (and Model #) 15 5/ x 463/ 056 Skylight Model and Design Pressures (pounds per square foot) Venting Skylight Venting Skylight. Fixed Skylight VS (manual) VSE (electric) FS Downward Downward Wind Uplift Downward Wend Uplift NA NA NA NA 144 53 211%x27% 101 135 63 135 63 121 63 21'/2 x 38'/2 104 121' 31 121 45 100 45 211/2 x 463/ 106 114 39 101 38 93 38 21 Y2 x 55 108 107 48. 107 48 85 32 211/2 x 70'/ 112 NA NA NA NA 77 37 235/,6 x 23 9/18 (150) NA NA NA NA 188 68 235/ x 463/ 156 NA NA NA NA 93 35 305/ x 305/ 302 NA NA NA NA 108 40 305/ x 38'/2 304 85 32 85.. 32 85 32 305/ x46 3& 306 82 26 72 28 70 26 305/ x 55 308 66 23 66 33 58 22 443/ x 27'/2 601 81 26 81 30 81 30 443/ x 46Y2 606 59 23 59 37 46 18 47 5/ x 463/ 656 NA NA NA NA NA I NA Notes 1. 1 in. = 25.4 mm F 2. Number of fasteners used to attach the unit to curb. Fasteners shall be #8 x 1-1/2 inch (38.1 mm) long stainless steel wood screws. 3. Downward Load (including dead load) shall be determined from the largest of the following combinations: 1)Downward Wind Load + 0.5 (Snow Load) 2)0.5 (Downward Wind Load) + Snow Load . 4. . _ 1 psf = 6.895 kPa Table 3 Model FCM Interior Pane - Laminated Tempered (9910) Model Number Size' Fasteners 2 Downward Load Wind Uplift Load 2222 265/8 in x.265/e,in 2 per side '• 121 psf 1.10 psf 8 total 2246 or 4622 265/t in x 505/9 in or ° 50 /8 in 26 /8 in 2 per short side 79 psf 84 psf x 3 per long side 10 total 3030 345/8 in x 345/8 in 3 per side . 100 psf 105 psf 12 total 4646 505/8 in x 505/8 in3 per side 40 psf 45 psf 12 total Notes: 1. 1 in. = 25.4 mm 2. Number of fasteners used to attach the unit to curb. Fasteners shall be #8 x 1-1/2 inch (38.1 mm) long stainless steel wood screws. 3. Downward Load (including dead load) shall be determined from the largest of the following combinations: 1)Downward Wind Load + 0.5 (Snow Load) 2)0.5 (Downward Wind Load) +Snow Load 4. 1 psf = 6.895 kPa Page 8 of 8 NER-216 Table 4 — Model FCM Interior Pane - Laminated Heat -Strengthened (74) Model Number .Size' Fasteners 2 Downward Load 3 Wind Uplift Load 2222 265/8 in x 265/8 in 2 per side 121 psf 110 psf, 8 total 2246 or 4622 265/ in x 505/ in or in 269/8 in 2 per short side 79 psf 84 psf 509/8 x 3 per long side 10 total 3030 345/8 in x 345/8 in, 3 per, side 100 psf 105 psf 12 total 4646 ' 505/8 in x 505/8 in 3 per side 40 psf 45 psf 12 total A' - - � , � ! � ' .t ` k ' a _::tt., k 1 � i ! ♦'' .- ' +:` _ �_ b - '. n • 4 * r.�s �,Ii ' �,4 ."�2, fa ' i } TM 7, T t-LJ1 'Exhausts kr L®lce & Turbine with No, M, ®a�®n CITY OF l-p``C�INTA 'a.3"X a'r' ., L rie ;r .BUILDING ;& SAFETY DEPT. t• ,! � t'- � �'i� �. •��9��a�� t3f� ���i �, �. t ��Y °i �""'���'���tt kr � t � tl ���� : '6x ''.i ,.YG, r i4 k rt ;. AP k,®,. j - 3 ! - I i <p�3 i�,°%3a r..7,{" {y rlr �a{Krjy+S • . 1?'.� ,'e ,. rl '� t '' �,e.'` '`'' „..4 7'��,''siv` �"7°3¢ x 1� ;FOR`CON8TRUCTION � •- : � x �, f= �� � _-.(,�v , � t.3�: '� , T DIB ' BY� - 1' j4` -'. Fp `�o.-�D.I. V , N a Vt, J ,Tj}$gyJ1 � 'Y a a 'a.. i' j � z fit. A t �r:1 nR r � } '• s x! knu, f 3 C Y v Y, .�, l 5,77.9;539 l is 19,'EXHAUSTS WITWN0 W10VMNG Outside air moving ,against the Auramentilator s,louv'erswill produce a continuous draw from an attic` or building; driving obt ,heat in the summer and moisture in the winte 6 }® I ; '- ;Manufactured.from heavy gaugetaluminum ,.the Aura Vent has'a lowlprofde and does not require any .field'a'sse ' bly "_ 3 � • �. 4 s . y.... -The,-Aura Ventilator can;be''usedon shingle, tile, and metal. roofs: Diameter sizes from'4" * .' • art ILI �a "L, ,q Ik/j, �i 3`'�rF _ x 4 A - PRACTICAL F3v4 -CHOM C� x; pr # 1 d ...a q } n i ��et ^R , i _ Can be, installed on. pitched roofs Unthout' the:: need °of an:`adlustable base, and has been used extensively on flat and pitched ,roofs,.To. increase 3stack heights .1'; 18" collars are available The Aura Ventilator is an effective 'substitute for thee turbine `and :other. vents: , 'F. y { _ FOR NEW. ROOM AND Can be retrofitted onto existing turl)ine bases,-,vent'pipes, and chirimneys.:Thermostatically con , trolled dampers ape- also available *. h Tested at,sustained wind„speeds of 110:mph;.and is; made in the, USA. Dade County approved models and powder coated vents` in:various colors ,"are also. available.', C. 1 ISL IPRODUCTS,h� ,Cm .427-34L,";-845-565-777 . :� \ -'... �;•r 'fir .: ,~" a ” �''. {.` ... r , ' ` •� � . , � www.roofvents.com 3kE`rnail: roofvents@aol.com F:ax 845-5fi2-8963 r ' �r 71 •�' ;r{ i..' n ..:r.,� �. "I,yi''C r.r r- .Z._` " w..�"+,, z� '- k `-..'r-.s fix° ,ct'-,k,.. z, ,.. ! DIMENSIONS IN INCHES" AV -6. AV 8' Av-12 `�►v-14 . AV -118 i rev -24 ` 8 12 .��.14 18 24 i Inside Diameter 6. Outside Diameter `9 . `. «} 11.5: K Y 16'` ~-18 24 29 i< Height 6.5 ' •�� 6.5 6:5 6 5 8.+ _ ,10 Sq�iare'Flange L R 1/V - {+ �' 12. 13.5 18 �,; 19 24 30 t Max. Pitch Capacit 5/12 , 5/12 ' 7/12 V12 "6/12 5/12 . 4 Net Free Vent-A'r'ea"iri'Sq, ln." 28 , w 50 113- � � 144�� 254. -452 4° Additional Collar Heights 1 2�4 or 6 ; also collars can, be combine E_g two 6" collars c rnbine fora 12" stock:', It ;4pplication . One Vent'pi* 3 ,-� ;100 sq' ft" ::200 sq ft, 450 sq ft 600 sq ft 1050 sq ft 1880 sq, ft. -SHIPPING DATA Est. Weight./ Verit in Lbs 2. r• 3 4 10 15 ` Also available in,4`; • 10'; 46", 26 ; i� INSTALLATION CERTIFICATE (Page 4 of 12) CF -6R Site Address. Permit Number INSTALLER COMPLIANCE STATEMENT FOR DUCT LEAKAGE INSTALLER COMPLIANCE STATEMENT The building was: ✓ [DIrested at Final ✓ E3 Tested at Rough -in INVALLER VISUAL INSPECTION AT FINAL CONSTRUCTION STAGE: Remove at least one supply and one return register, and verify that the spaces between the register boot and the interior Wishing wall are properly sealed. If the house rough -in duct leak2ge test was conducted without an air handler installed, inspect the connection points tween the air handler and the supply and return plenums to verify that the connection points are properly sealed. nspecs all joints to ensure that no cloth backed rubber adhesive duct tape is used ✓ 9DUCT LEAKAGE REDUCTION Procedures or reld veri ication and dia nostic testing of air distributions stems are available in RACM Annendix RC4 3 NEW CONSTRUCTION: i /7/� 6-v Duct Pressurization Test Results (CFM @ 25 Pa) Measured cy Values r°ri�`•; I Enter Tested Leakage Flow in CFM: S-7 lmv. v. 'A � n�ti�atakf>1: Fan Flow: Calculated (Nominal: v"❑ Cooling ✓ ❑ Heating) or ✓ easured' 2 If Fan Flow is Calculated as 400 cfm/ton x number of tons or as 21.7 cfm/(kBtu/hr) x Heating +� Capacity in Thousands of Btu/hr, enter total calculated or measured fan flow in CFM here: 17,00 ✓ V/ 3 Pass if Leakage Percentage:5 6% for Final or:5 4% at Rough -in: -7 ass ❑ Fail 100 x Line # l / Line # 2 ALTERATIONS: Duct System and/or HVAC Equipment Change -Out 4 Enter Tested Leakage Flow in CFM from Pre -Test of Existing Duct System Prior to Duct' System Alteration and/or Equipment Change -Out. Enter Tested Leakage Flow in CFM from Final Test of New Duct System or Altered Duct'' 5 S DSystem System for Duct Alteration and/or E ui ment Chan a -Out. WE x i. �.�:. Enter Reduction in Leakage for Altered Duct System 6�.; Line # 4 Minus Line # 5 —(Only if Applicable) 7 Enter Tested Leakage Flow in: CFM to Outside (Only if Applicable) ✓ d/ Entire New Duct System - Pass if Leakage Percentage S 6% for Final ors 4% at Rough -in ❑Pass 11 Fail 8 100 x Line # 5 / Line # 2 TEST OR VERIFICATION STANDARDS: For Altered Duct System and/or HVAC Equipment Change - Out Use one of the following four Test or Veriflcation Standards for compliance: 9 Pass if Leakage Percentage S 15% [100 x [ (Line # 5) / (Line # 2)]] ❑ Pass ❑ Fail 10 Pass if Leakage to Outside Percentage S 10% [100 x [(Line # 7) / (Line # 2)]] ❑ Pass ❑ Fail Pass if Leakage Reduction Percentage �: 60% [100 x r _(Line # 6) / (Line # 4)]] ❑ Pass ❑ Fail 11 and Verification by Smoke Test and Visual Inspection 12 Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual'lns ection i _ fs-m m. ❑ Pass ❑ Fail Pass if One of Lines # 9 through # 12 pass ' ❑ Pass ❑ Fail ✓ 19,6the undersigned, verify that the above diagnostic test results were performed in conformance with the requirements for compliance credit. 1, the undersigned, also certify that the newly installed or retrofit Air -Distribution System Ducts, Plenums and Fans comply with Mandatory requirements specified in Section 150 (m) of the 2005 Building Energy Efficiency standards. Installing S contract r (C Name) G eral Contracto (Co. Nam ) 0 caner i /7/� 6-v Signatur : Date: 312 D t V Copies to: BUIL ING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY Residential Compliance Fornrs April 2005 CERTIFICATE OF FIELD VERIFICATION & DIAGNOSTIC TESTING (Pagel of 8) CF -4R Project Address / I D D La o Duct Diagnostic Leakage Testing Results BuilderName Builder Contact e ,LO- Telephone - 2,3 Plan Number HERS Rater �— Telephone Sam le Group Number Compliance Method P esc ' tive Measured Climate Zone Certifying SignatureI Duct Pressurization Test Results (CFM @ 25 Date Sample House Number Finn -: HE Provider Street Address: l ity/State/Zip: Rc� o :opies to: BUILDER, HERS PROVIDER AND BUILDING DEPARTMENT. HERS RATER COWLIANCE STATEMENT The house was: ✓ EkTested ✓ ❑ Approved as part of sample testing, but was not tested As the HERS rater providing diagnostic testing and field verification, I certify that the house identified on this form complies with the diagnostic tested compliance requirements as checked ✓Ion this form. The HERS rater must check and verify that the new distribution system is fully ddcted and correct tape is used before a CF -4R may be released on every tested building. The HERS rater mut not release the CF -4R until a properly completed and signed CF -6R has been received for the sample and tested buildi s. W,Ahe installer has provided a copy of CF -6R (Installation Certificate). Ll/ New Distribution system is fully ducted (i.e., does not use building cavities as plenums or platform returns in lieu of ducts). ii New systems where cloth backed, rubber adhesive duct tape is installed, mastic and draw bands are used in _ combination with cloth backed, rubber adhesive duct tape to seal leaks at duct connections. ✓MUNIMUM REQUIREMENTS FOR 6,UCT LEAKAGE REDUCTION COMPLIANCE CREDIT Proceduresjorpetd verywatron ana atagnosttciresrmg of air arstnounan systems are uvuttaum in r wvi, /1F.Pc/Iu1A Duct Diagnostic Leakage Testing Results NEW CONSTRUCTION: Measured Duct Pressurization Test Results (CFM @ 25 Pa) I Values -: 1 Enter Tested Leakage Flow in CFM: l l - 5-7. ' .� ,,` Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓ GKAeasured ✓ V. 2 Enter Total Fan Flow in CFM: I I 'I Zoo 3 Pass if Leakage Percentage 5 6% [ 100' L (Line # 1) / (Line # 2)]] -L ass ❑ Fail ALTERATIONS: Duct System and/or HVAC Equipment Change -Out e.; Enter Tested Leakage Flow in CFM from CF -6R: Pre -Test of Existing Duct System Prior to { W.W1111 4 Duct System Alteration and/or Equipment Change-Out.1 . Enter Tested Leakage Flow in CFM: Final i est of Newl Duct System or Altered. Duct System=, WON! 5 for Duct System Alteration and/or Equipment Chan a-Qut. Enter Reduction in Leakage for Altered Duct, System [ # 4) Minus (Line # 5)] fi • . 6 _(Line (Only if Applicable) 7. Enter Tested Leakage Flow in CFM to Outside (Only iflApplicable) ✓ `� Entire New Duct System - Pass if Leakage Percentage 6% ❑Pass ❑Fail 8 100 x Line # 5 / Line # 2)11 TEST OR VERIFICATION STANDARDS: For Altered Duct System and/or HVAC Equipment Change -Out Use one of the followin four Test or Verification Standards for compliance: Pass if Leakage Percentage:5 15% [ 100 x,L--(Line # 5) / (Line # 2)]] ❑ Pass ❑ Fail 9 10 Pass if Leakage to Outside Percentage 5 10% [ 100 x _(Line 1# 7) / (Line # 2)]] ❑ Pass ❑ Fail Pass if Lcakagc Reduction Percentage Z 60°/ [100 x [ __.__�Llne # 6) / (Line # 4)11 . ❑pass 0, Fail 11 12 and Verification by Smoke Test and Visual Inspection I Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual In{s ection i s u~xc •': "'` ❑ Pass ❑ Fail Pass if One of Lines # 9 through # 12 pass _°. ❑Pass 13 Fail Residentiol Compliance Forms INSTALLATION CERTIFICATE (Page 4 of 12) CF -6R Site Address V i S)m L4,,-7iU Permit Number INSTALLER COMPLIANCE STATEMENT FOR DUCT LEAKAGE INSTALLER COMPLI CE STATEMENT The building was: ✓ EVested at Final ✓ El Tested at Rough -in 7IN ALLER VISUAL INSPECTION AT FINAL CONSTRUCTION STAGE: Re ove at least one supply and one return register, and verify that the spaces between the register boot and the interior is ng wall are properly sealed. f a house rough -in duct leakage test was conducted without an air handler installed, inspect the connection points /1'nspe5,all ween the air handler and the supply and return plenums• to verify that the connection points are properly sealed. joints to ensure that no cloth backed rubber adhesive duct tape is used ✓ Lei DUCT LEAKAGE REDUCTION Procedures for field verification and diagnostic testing, of air distributinn .w.ctomc aro availahto i,r RArn-r Annown-e Ari i NEW CONSTRUCTION: Duct Pressurization Test Results@ 25 ( Pa) CFMValues Measured Signatur Date: 0 1 Enter Tested Leakage Flow in CFM:.o Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓ easured 2 If Fan Flow is Calculated as 400 cfTdton x number of tons or as 21.7 cfm/(kBtu/hr) x Heating Capacity in Thousands of Btu/hr, enter total calculated or measured fan flow in CFM here: ✓ ✓ 3 Pass if Leakage Percentage<— 6% for Final or:5 4% at Rough-in:ass 100 x Line # t / Line # 2)11 ❑Fail ALTERATIONS: Duct System and/or HVAC Equipment Change -Out .M. Enter Tested Leakage Flow in CFM from Pre -Test of Existing Duct System Prior to em DAMI 4 System Alteration and/or Equipment Change -Out, in 'CFM Tested Leakage Flow iCFM from Final Test of New Duct System or Altered Duct 5 S stem for Duct System Alteration and/or Equipment ment Chan a -Out. ...x;, Enter Reduction in Leakage for Altered Duct System [d� r RV 6 Line # 4 Minus Line # 5 — Onl if A licable ". 4r 7 Enter Tested Leakage Flow in. CFM to Outside (Only if Applicable) ✓ �/ Entire New Duct System - Pass if Leakage Percentage:5 6% for Final ors 4% at Rough -in 8 100 x Line # 5 / Line # 2 11 Pass ❑Fail TEST OR VERIFICATION STANDARDS: For Altered Duct System and/or HVAC Equipment Change- ✓ Out Use one of the following four Test or Verification Standards for compliance: 9 Pass if Leakage Percentages 15% [ 100 x [ (Line # 5) / (Line # 2)]] ❑ Pass ❑ Fail to Pass if Leakage to Outside Percentages 10% [100 x [(Line # 7) / (Line # 2)]] ❑ Pass ❑ Fail 11 Pass if Leakage Reduction Percentage 260% [100 x `_(Line # 6) / (Line # 4)]] ❑ Pass ❑ Fail and Verification by Smoke Test and Visual Inspection 12 Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual'lns ection _ EMS -;- ❑ Pass ❑ Fail Pass if One of Lines # 9 through # 12 pass = ❑ Pass ❑ Fail ✓ Gif, the undersigned, verify that the above diagnostic test results were performed in conformance with the requirements for compliance credit. 1, the undersigned, also certify that the newly installed or retrofit Air -Distribution System Ducts, Plenums and Fans comply with Mandatory requirements specified in Section 150 (m) of the 2005 Building Energy Efficiency standards. InstallingS contract r (C Name) G eral Contracto (Co. Nam) 0 caner Signatur Date: 0 Copies to: BUIL INC DEPARTMENT, HE RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY Residential Compliance Forms April 2005 I CERTIFICATE OF FIELD VERIFICATION & DIAGNOSTIC TESTING (Page 1 of 8) CF -4R Project Address Duct Pressurization Test Results (CFM @ 25 Pa) Builder Name Builder Contact Telephone Plan Number HERS Rater _ Telephone --7 Sample Group Number Compliance Method Pr cri ive Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓. easured Climate Zone Certifying Signature / D to 06 Sample House Number Firm li ¢ HERS eider Street Address: S, Z� ity/State/ tp: 7 :opies to: BUILDER, HERS PROVIDER AND, BUILVINU UNrAKI MEN t V HERS RATER C��IANCE STATEMENT The house was: -/ested ✓ D Approved as pa� of sample testing, but was not tested As the HERS rater providing diagnostic testing and field verification, I certify that the house identified on this form complies with the diagnostic tested compliance requirements as checked "ion this form. The HERS rater must check and verify that the new distribution system is fully ducted and correct tape is used before a CF -411 may be released on every tested building. The HERS rater mut not release the CF4R until a properly completed i nd signed CF -6R has been received for ti� a sample and tested buildi s. T installer has provided a copy of CF -6R (Installation Certificate). lV ew Distribution system is fully ducted (i.e., does no. use building cavities as plenums or platform returns in lieu of ducts). New systems where cloth backed, rubber adhesive duct tape is installed, mastic and draw bands are used in combination with cloth backed, rubber adhesive duct tape to seal leaks at duct connections. ✓ Q41NIMUM REQUIREMENTS FOR IDUCT LEAKAGE REDUCTION COMPLIANCE CREDIT Procedures for field verification and diagnostic' testing of air distribution systems are available in RA CM, Appendix RC4.3. T)unt T)iaannctic T.eakAae Testinv Results NEW CONSTRUCTION: Duct Pressurization Test Results (CFM @ 25 Pa) Measured Values 1 Enter Tested Leakage Flow in CFM: 105 Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓. easured 2 Enter Total Fan Flow in CFM: 3 Pass if Leakage Percentage 5 6% [ 100 x (_ !(Line # 1) / (Line # 2)]] S, Z� ass ❑ Fail ALTERATIONS: Duct System and/or HVAC E ui meni Change -Out e < Enter Tested Leakage Flow in CFM from CF -611: Pre-' :est of Existing Duct System Prior to 4 Duct System Alteration and/or Equipment Change -Out. I �t Enter Tested Leakage Flow in CFM: Final Test of New Duct System or Altered Duct System 5 for Duct System Alteration and/or E ui ment Change -Out. 1 - Enter Reduction in Leakage for Altered Duct System (Line # 4) Minus (Line # 5)] 6 (Only if Applicable) 7 Enter Tested Leakage Flow in CFM to Outside (Only if Applicable) Entire New Duct System - Pass if Leakage Percentage S 6% ❑ Pass ❑.Fail 8 100 x Line # 5 / Line # 2)11 TEST OR VERIFICATION STANDARDS: For Altered Duct System and/or HVAC Equipment Change -Out Use one of the followin four Test or Verification Standards for compliance: Pass if Leakage Percentage:5 15% [100'x;L__�_(�ine # 5) / (Line # 2)]] ❑ Pass ❑ Fail 9 10 Pass if Leakage to Outside Percentage S 10% [100 x [J__(Line # 7) / (Line # 2)]] ❑ Pass ❑ Fail Pass if Lcakagc Reduction Percentage 2 600/. [100 x L ._..__(Line # 6) / (Line # 4)11 ❑pass E3 Fail t land Verification b Smoke Test and Visual fns ection� 12 Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual Ins ection r,''*<� ❑ Pass O Fail 12 # h throwg ass Pass If One of Lines # 9 P e�^� Prr4f".', ❑ Pass ❑ Fail A....:/ Inns Residential Compliance Forms INSTALLATION CERTIFICATE (Page 4 of 12) CF -6R Site Address Permit Number 5�10'Zo ( 11-1 c" I -- INSTALLER COMPLIANCE STATEMENT FOR DUCT LEAKAGE INSTALLER COMPLIANCE STATEMENT The building was: ✓ E ested at Final ✓ El Tested at Rough -in IINV<LLER VISUAL INSPECTION AT FINAL CONSTRUCTION STAGE: COY Remove at least one supply and one return register, and verify that the spaces between the register boot and the interior fishing wall are properly sealed. EK If the house rough -in duct leakage test was conducted without an air handler installed, inspect the connection points �etwcen the air handler and the, supply and return plenums to verify that the connection points are properly sealed. nspec�*l joints to ensure that no cloth backed rubber adhesive duct tape is used ✓ 1Z DUCT LEAKAGE REDUCTION PrnrpdurOf rnr.!)P;d VOrifirnl;nn nni/ X- -4, /eo11...n n i/+Ai NEW CONSTRUCTION: 610 Duct Pressurization Test Results (CFM @ 25 Pa) Measured,.,t.."; stit� � Values ,•��` ` ..jjti..��" 1 Enter Tested Leakage Flow in CFM: O E v .4fi% Y:5 Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or ✓ easured 2 If Fan Flow is Calculated as 400 cfm/ton x number of tons or as 21.7 cfm/(kBtu/hr) x Heating Capacity in Thousands of Btu%hr, enter total calculated or measured fan flow in CFM here: �© 3 Pass if Leakage Percentages 6% for Final or:5 4% at Rough -in: 100 x Line # t / Line # 2 , (e ass ❑Fail ALTERATIONS: Duct System and/or HVAC Equipment Change -Out Enter Tested Leakage Flow in CFM from Pre -Test of Existing Duct System Prior to Duct' System Alteration and/or Equipment Change -Out. 5 Enter Tested Leakage Flow in' CFM from Final Test of New Duct System or Altered Duct �`N;; System for Duct System Alteration and/or Equipment Chan a -Out.` .'"'f'- 6 Enter Reduction in Leakage for Altered Duct System" �,t e �,' Rom Line # 4 Minus Line # 5 — Onl if A licable) i ~ ?R t' ' 7 Enter Tested Leakage Flow in: CFM to Outside (Only if Applicable) ✓ o/ Entire New Duct System - Pass if Leakage Percentage S 6% for Final or:5 4% at Rough -in li 100 x Line # 5 / Line # 2 ❑ Pass ❑ Fail TEST OR VERIFICATION STANDARDS: For Altered Duct System and/or HVAC Equipment Change - Vol Out Use one of the following four Test or Verification Standards for compliance: 9 Pass if Leakage Percentage:5 15% [100 x [ (Line # 5)1(Line # 2)]] ❑ Pass ❑ Fail 10 Pass if Leakage to Outside Percentage S 10%[100x [(Line # 7) / (Line # 2)]] ❑ Pass ❑ Fail 11 Pass if Leakage Reduction Percentage'a 60% [100 x _(Line # 6) / (Line # 4)]] ❑ Pass ❑ Fail and Verification by Smoke Test and Visual Inspection 12 Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual lns ection� 69_ ❑ Pass ❑ Fail Pass if One of Lines # 9 through # 12 ass ❑ Pass ❑ Fail ✓ L' i, the undersigned, verify that the above diagnostic test results were performed in conformance with the requirements for compliance credit. 1, the undersigned, also certify that the newly installed or retrofit Air -Distribution System Ducts, Plenums and Fans comply with Mandatory requirements specified in Section 150 (m) of the 2005 Building Energy Efficiency standards, Installing S contract r (C Name) G era) Contracto (Co. Nam) 0 wner 610 Signatur : Date: -3)n I 0-i Copies to: BUIL ING DEPARTMENT, HERS RATER (IF APPLICABLE) BUILDING OWNER AT OCCUPANCY Residential Compliance Forms April 2005 CERTIFICATE OF FIELD VERIFICATION k DIAGNOSTIC TESTING (Page 1 of 8) CF -4R Project Address z Builder Name Builder Contact Telephone Plan Number HERS Rater p Telephone Sample Grou2 Number Enter Tested Leakage Flow in CFM: Compliance Method Pres ' five y ` - •' Climate Zone Certifying Signature L IL ate Sample House Number Finn I HER ovider Street Address: �ktO— I try/S te/Z. C�t,CCc 9! 30 �oples to: BUILDER, HERS PROVIDER AND; BUILDING DEPARTMENT HERS RATER COM LIANCE STA'fEMEN7 The house was: ✓ U4ested ✓ ❑ Approved as pat As the HERS raterproviding diagnostic testing and field ve the diagnostic tested compliance requirements as checked V distribution system is fully ducted and correct tape is used b rater m t not release the CF -4R until a properly completed build}'gs. Q/T�e installer has provided a copy of CF -6R (Installat ■'.,Kew Distribution system is fully ducted (i.e., does nc IV New systems where cloth backed, rubber adhesi tnbination with cloth backed, rubber adhesive of sample testing, but was not tested fication, I certify that the house identified on this form complies with on this form. The HERS rater must check and verify that the new .fore a CF -411 may be released on every tested building. The HERS ind signed CF -6R has been received for t ii a sample and tested n Certificate). use building cavities as plenums or platform returns in lieu of ducts). duct tape is installed, mastic and draw bands are used in uct tape to seal leaks at duct connections. ✓GKMINIMUM REQUIREMENTS FOR DUCT LEAKAGE REDUCTION COMPLIANCE CREDIT Procedures for field verification and diagnostic: testing of air distribution systems are available in RA CM, Appendix RC4.3. Duct Diagnostic Leakage Testing Results NEW CONSTRUCTION: Duct Pressurization Test Results (CFM Q 25 Pa) I Measuredt Values I Enter Tested Leakage Flow in CFM: I 90 y ` - •' Fan Flow: Calculated (Nominal: ✓ ❑ Cooling ✓ ❑ Heating) or V'easured 2 Enter Total Fan Flow in CFM: 3 Pass if Leakage Percentage:5 6% [ 100 x [_ (Line # 1) / (Line # 2)]) 2 mss ❑Fail -r" ALTERATIONS: Duct System and/or HVAC Equi meni Change -Out Enter Tested Leakage Flow in CFM from C_F-611: Pre-Tlest of Existing Duct System Prior to a 4 Duct System Alteration and/or Equipment Change -Out. Enter Tested Leakage Flow in CFM: Final Test of Newl Duct System or Altered Duct System 5 for Duct System Alteration and/or Equipment Chan a -Out. +_- Enter Reduction in Leakage for Altered Duct System (Line # 4) Minus (Line # 5)] ..' 6 (Only if Applicable) 7 Enter Tested Leakage Flow in CFM to Outside (Only if Applicable) ✓ `� Entire New Duct System - Pass if Leakage Percentage 6% ❑ Pass ❑ Fail 8 100 x Line # 5 / Line d# 2 TEST OR VERIFICATION STANDARDS: For AlteredlDuct System and/or HVAC Equipment Change -Out Use one of the followin four Test or Verification Standards for compliance: Pass if Leakage Percentage 5 15% [100 x;L_(Line # 5) / (Line # 2)]] ❑ Pass ❑ Fail 9 Pass if Leakage to Outside Percentage 5 10% [100 x t1,__(Line # 7) / (Line # 2)11 ❑ Pass ❑ Fail 10 Pass if Leakage Reduction Percentage z 600/n [100 x f_, - .__.__(Line # 6) / (bine # 4)11 ❑ Pass ❑Fail 11 12 and Verification by Smoke Test and Visual Ins ectioni Pass if Sealing of all Accessible Leaks and Verification by Smoke Test and Visual Inspection ;v z>IrMl ❑ Pass ❑ Fail Pass If One of Lines # 9 through # 12 pass `.. ,`.. ❑ Pass ❑ Fail i .linos Residential Compliance Foy -ins 9prt TITLE 24 REPORT Title 24 Report for: Lee Stirrette Main Residence MB 258/69-70 APN 762-250-017, Lot 17 Vista Lazo La Quinta, Ca. 92253 Project Designer: Gabriel Lujan & Associates 45-175 Panorama Drive, Suite A Palm Desert, Ca. 92260 760-674-8100 -CITY OF LA QUI' Report Prepared By: BUILDING & SAFETY DEPT.. APPROVED Edgar Torres ' FOR CONSTRUCTION E.D.S. 1310 2nd Street SAT D BY �to T . Coachella, CA 92236 t l (760) 469-6195 Job Number: EM 03142006 Date: 7/10/2006 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.energysoft.com. EnergyPro 4.1 by EnergySoft Job Number: 03142006 User Number: 6688 k - 0MM (we GAP 9 � ". � �. r ..c r Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R _Lee_Stir_r_ette_Main_R.e.sid.e.nce_M.B2.5.8/_6.9-7_0 ❑ Addition 7/1.0/20-0-6, Project Title - ❑ Multi Family ❑ Existing + Add/Alt Date _A P_N_7_622.5.0-01.7_,_Lot 17 V_ista_Lazo-La_Q.uin.ta ft2 Building Front Orientation: (N) 0 deg Project Address 0 ft2 Fuel Type: Building Permit # Slab on Grade Area: 3,978 ft2 760) 469-6195 _0..0.74_ -E.-D.S. Documentation Author 11.0 ft Telephone Plan Check/Date _En.e.r_g_y_P_r_o 1.00 -R_19_ 15 SHGC: 0.39 Field Check/Date Compliance Method 60_ BUILDING ZONE INFORMATION Climate Zone # of Thermostat TDV Energ Use Standard Proposed Compliance Hgt. (kBtu/sf-yr� Design Design Margin 2 Space Heating 2.01 2.44 -0.42 2 Space Cooling 60.38 50.95 9.43 2 Fans 9.09 7.91 1.18 459_ Domestic Hot Water 6.45 6.40 0.06 _Roof Pumps 0.00 0.00 0.00 _R=0.0_ Totals 77.94 67.69 10.25 _0...0.7.4_ Percent better than 13.2% Building Type: nJ Single Family ❑ Addition Total Conditioned Floor Area: 3,978 ft2 ❑ Multi Family ❑ Existing + Add/Alt Existing Floor Area: n/a ft2 Building Front Orientation: (N) 0 deg Raised Floor Area: 0 ft2 Fuel Type: Natural Gas Slab on Grade Area: 3,978 ft2 Fenestration: _0..0.74_ Average Ceiling Height: 11.0 ft Area: 979 ft2 Avg. U: 0.52 Number of Dwelling Units: 1.00 -R_19_ Ratio: 24.6% Avg. SHGC: 0.39 Number of Stories: 1 60_ BUILDING ZONE INFORMATION _R_1.9_ # of Thermostat Vent Zone Name Floor Area Volume Units Zone Type Type Hgt. Area .HVAC_System 1_(Zone_I) 1.,035 1.0,350 -0.26_ Sleeping _SleepingStat_ 2 _n/a .HVA C_System_2_(Zone_II) 1.,.9.5.0 _23,40.0 _0..49_ -Conditioned- -Setback- 2 _n/a .HVA. C_System_3_(Zone_I.11) 993 9,930 0.2.5_ Sleeping _S.IeepingStat_ 2 _n/.a OPAQUE SURFACES ix IN IX [X IN Insulation Act. Type Frame Area U -Fac. Cay. Cont. Azm. Roof- Wood_ 1.,031 _0.025_ -R=38_ _R=0.0_ _270- Wall- Wood_ 1.9.5_ _0..0.74_ -R19_ _R=0.0_ 0_ Wall_ Wood_ 4.4_ _0.:024_ -R_19_ _R=0.0_ _9.0_ Wall- Wood- 60_ _0.0.7_4_ _R_1.9_ _R=0.0_ 0_ Wall_ Wood_ 9.0_ _0..07-4_ _R_1.9_ _R=0.0. 9.0_ Wall_ Wood_ 25_ _0..07-4_ -R_1.9_ _R=0.0_ 1.35_ Wall_ Wood_ 7.0_ _0.0.74_ _R_1.9_ _R=0.0_ 1.80_ Wall_ Wood_ 459_ _0.0.74_ -R_1.9_ _R=0..0_ _27.0_ _Roof Wood_ 1.,9.5.0_ _0..025_ -R=3.8_ _R=0.0_ 1.80_ Wall_ Wood_ 29_ _0...0.7.4_ -R_1.9 _R=0.0_ 0_ .Door None- 48_ _0.500_ _None_ _R=0.0_ 0_ Wall_ Wood_ 7.8_ _0.024_ _R_1.9_ _R=0.0_ _270- Wall- Wood_ 1.08_ _0...024_ -R_19_ _R=0._0_ 0_ Wall_ Wood_ 72_ _0..0.7_4_ -R_1.9 _R=0...0. 9.0_ Wall_ Wood_ 1.08_ _0.0.7-4_ _R_1.9 _R=0..0_ 0_ Wall_ Wood_ 4.5_ _0.0.7-4_ -R_1.9_ _R=0..0_ 0_ Wall_ Wood_ 1.7.0_ _0.0.74_ _R_1.9_ _R=0.0_ 0. Wall_ Wood_ 114_ _0.0.74_ -R-1.9_ _R=0.0_ 0_ Wall_ Wood_ 36_ _0..07_4_ _R_1.9_ _R=0.0_ 1.80_ Wall_ Wood_5.4_ _0...07-4_ -R_1.9 _R=0.0_ _27.0_ Wall_ Wood_ 7.8_ _0..07-4_ _R_1.9_ _R=0.0_ 1.80_ _Roof Wood_ 9.85_ _0..025_ -R=3.8_ _R=0.0. 9.0_ Wall_ Wood_ 824_ _0...024_ _R_1.9_ _R=0..0_ -0- .Door- None- 21 _0.500_ -None_ _R=0.0_ 0_ Wall_ Wood_ 3.4.8_ _0.0.7_4_ -R_1.9_ _R=0.0. 9.0_ Gains Condition Tilt Y / N Status JA IV Reference Location / Comments 0 9.0 9.0 -90 ix IN IX [X IN ❑New ❑New ❑New El ❑New _01-1.8 Zone_I_Master_Bedroom 0.9=A5 Zone-1-Master-B-edroom 0.9_A5 Zone -1 -Master -Bedroom New- .09=A5 Zone_I_Master-Bed room _90 9.0 IN ❑New 0.9=A5 Zone -1 -Master -Bedroom 9.0 [XI ❑New _0.9=A5 Zo.ne_I_Master_B.edr_oom 9.0 IX ❑New _09=A5 Zone -1 -Master -Bedroom 0 [X� ❑New 09=A5 Zone_I_Master_Bedroom 9.0 [X ❑New _01_A1.8 Zone_ll_Lvg.Eam..Dng.Ki 90 IX ❑New 0.9=A5 Zo.ne_I1_Lvg.F_am.Dng.Ki 90 DK ❑New .28=A4 Zone_ll_Lvg.Eam.Dng.Ki 9.0 [X [-]New _09=A5 Zone_LI_Lvg_Eam_D.ng_Ki AXI El _0.9=A5 Zone_II_Lvg.F_am_Dng_Ki New- _.9.0 9.0 X [:]New _0.9_A_5 Zone_ll_Lvg.F_am.Dng.Ki 9.0 X [:]New _0.9=A5 Zone_I1_Lvg.F_am.Dng.Ki 90 IX ❑New _0.9=A5 Zone_I1_Lvg.F_am..Dng.Ki 9.0 DK [:]New _09=A5 Zone_LI_Lvg.Eam.Dng_Ki 90 [X� ❑New _0.9=A5 Zone_ll_Lvg.Eam.Dng.Ki IX ❑N.ew _0.9=A5 Zone_ll_Lvg.F_am.D.ng_Ki _90 [X ❑New 0.9=A5 Zo.ne_I.I_Lvg.F_am.Dng.Ki _9.0 0 � _Q [X ❑New ❑New _0.9=A5 Zone_I.I_Lvg.F_am.Dng.Ki _0_1-A1.8 Zo.ne_III_B.R_1_,2/Laun 0.9=A5 9.0 [X ❑New Zone_III_BR_1,2/Lawn -9.0 90 [X F1 .28-4 Zone_lll_BRZ1_,2/.Laun New- 09-A5 7nnp III RP -1 9/1 nim . EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page:3 of 15 1 I Certificate Of Compliance : Residential (Part 1 of 4) CF -1 R _LeeSti r_r_ette_M a i n_Res id.e.n.C.e_M.B2.5.8L6.9-7_0 [-X] Single Family 7/1.0%2 QQ6 Project Title - _AP_NJ_622.5.0=017_,_Lot 17 V_ista_Lazo-La_Q.uinta ❑ Multi Family ❑ Existing + Add/Alt Date Project Address Fuel Type: Slab on Grade Area: Natural Gas Building Permit # Average Ceiling Height: 11.0 Area: 469-6195 Avg. U: 0.52 -E.-D.S.(760) Documentation Author 24.6% Avg. SHGC:.. 0.39 BUILDING ZONE INFORMATION Telephone plan Check/Date _En.e.r_q��//P_r_o Floor Area Volume 15 Field Check/Date Compligrice Method Climate Zone TDV EnergyUse Standard Proposed Compliance (kBtu/sf-yr Design Design Margin Space Heating 2.01 2.44 -0.42 Space Cooling 60.38 50.95 9.43 Fans 9.09 7.91 1.18 Domestic Hot Water 6.45 6.40 0.06 Pumps 0.00 0.00 0.00 Totals 77.94 67.69 10.25 Percent better than Standard: 13.2% Building Type: [-X] Single Family ❑ Addition Existing Floor Area: ❑ Multi Family ❑ Existing + Add/Alt Building Front Orientation: (N) 0 deg Fuel Type: Slab on Grade Area: Natural Gas Fenestration: Average Ceiling Height: 11.0 Area: 979 ft2 Avg. U: 0.52 Ratio: 24.6% Avg. SHGC:.. 0.39 BUILDING ZONE INFORMATION Zone Name Floor Area Volume OPAQUE SURFACES Insulation Act. Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Wall- Wood- 1.89_ _0.0.74_ _R_1.9_ _R=0.0_ 1.80__9.0 Wall_ Wood_ 55_ _0..0.74_ -R_1.9_ _R=0.0_ 0__9.0 Total Conditioned Floor Area: 3,978 ft2 Existing Floor Area: n/a ft2 Raised Floor Area: 0 ft2 Slab on Grade Area: 3,978 ft2 Average Ceiling Height: 11.0 ft Number of Dwelling Units: 1.00 Number of Stories: 1 # of Thermostat Vent Units Zone Type Type Hgt. Area Gains Condition Y / N Status JA IV Reference Location / Comments X ❑New 0.9=A5 Zone_III_13R_1,2/.Laun K ❑N.ew 0.9=A5 Zone_III_B.R_1,2/Laura EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page:4 of 15 1 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 Project Title Overhang Left Fin Right Fin Date 7/10/2006 FENESTRATION SURFACES # Type Area U-Factorl SHGC2 True Azm. Tilt Cond. Stat. Glazing Type Location/ Comments _L 2 -Skylight-Right-(.W.)- Window Left (E)_ 4..0_ 3.0 _0-440_NERC_035 -NFRC. _27-0_ 0.490 NFRC 0_40 NFRC 90 _0- NewV_elux-F_CM Comfort_7.5-LowE2__Zone-I-Master-B.edroom- 90 New Milgard 3310,AL-DP/FIX Zone I Master Bedroom 3 Window Left (SE) 64.0 0.570 NFRC 0_38 NFRC 135 90 New Milgard 450.AL-DP-TB/SLDG Zone I Master Bedroom 4 Window Left (SE)_ 16.0 0.490 NFRC 0_40 NFRC 135 90 New Milgard 3310,AL-DP/FIX Zone I Master Bedroom 5 Window Rear (S)_ 40.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310 AL-DP/FIX Zone I Master Bedroom 6 Window Right (W)- 36.0 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310 AL-DP/FIX Zone I Master Bedroom 7 8 Window Window Front_(N)_ Front (N) 20 0 5.0 0.490 NFRC 0.40 NFRC 0.490 NFRC 0.40 NFRC 0 0' 99 NewMilgard 90 New Z310.AL-DP/FIX Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki Zone II Lvg.Fam.Dng.Ki 9 _1.0. 11 Window Window Window Frcnt_(N)_ Front -(N)_ Front (N)_ 12_0 12,0 48.0 0.490 NFRC 0.40 NFRC 0.490 NFRC 0.40 NFRC 0.490 NFRC 0_40 NFRC 0 0 0 90 New 90 New 90 New Milgard 3310,AL-DP/FIX Milgard 3310,AL-DP/FIX Milgard 3310.AL-DP/FIX Zone II Lvg.Fam.Dng.Ki_ Zone II Lvg_Fam.Dna.Ki Zone II Lvg.Fam.Dng.Ki 12 Window Front (N)_ 30.0 0.570 NFRC 0_38 NFRC 0 90 New Milgard 450,AL-DP-TB/SLDG Zone II Lvg.Fam.Dng.Ki 13 14 Window Window Rear (S.)_ Rear (S)_ _8.0.0 16.0 0.57.0 NERC 0.38 NERC 1-8.0_ 0.490 NFRC 0_40 NFRC 180 _90- NewMilgard 450,AL_DP=TB/_S.LDG 90 New Milgard 3310 AL-DP/FIX _Zone-I.I_Lvg,Fam..Dng..Ki_ Zone II Lvg.Fam.Dng.Ki 15 Window Rear (S)_ 35.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone 11 Lvg.Fam.Dng.Ki 16 Window Rear (S)_ 7.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310.AL-DP/FIX Zone 11 Lvg.Fam.Dng.Ki 17 Window Rear (S)_ 80.0 0.570 NFRC 0_38 -NERC. 180 90 New Milgard 450,AL-DP-TB/SLDG Zone II Lvg.Fam.Dng.Ki 18 Window Rear (S) 16.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310 AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 19 Window Rear (S)_ 25_0 0.490 BFRC 0.40 NFRC 180 20_ New Milgard 3310 AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 11613. INTERIOR AND EXTERIOR SHADING Window None No Insulation Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 None 1.00 2 Bug Screen 0.76 3 Bug Screen 0.76 8.0 8.0 8.0 4.0 8.0 8.0 4 Bug Screen 0.76 -2.0 8.0 8_0 2.0 8_0 -0--0 5 Bug Screen 0.76 6 Bug Screen 0.76 7 Bug Screen 0.76 8.0 2.5 9.0 4.0 9.0 9.0 8 Bug Screen 0.76 2.0 2.5 9.0 4.0 9.0 9.0 9 Bug Screen 0.76 2.0 6.0 9.0 4.0 9.0 9.0 10 Bug Screen 0.76 11 Bug Screen 0.76 12 Bug Screen 0.76 ' 13 Bug Screen 0.76 10.0 8.0 8.0 4.0 8.0 8.0 14 Bug Screen 0.76 1.5 8.0 8.0 2.0 8.0 8.0 15 Bug Screen 0.76 10.0 3.5 8.0 4.0 8.0 8.0 16 Bug Screen 0.76 1.5 3.5 8.0 2.0 8.0 8.0 17 Bug Screen 0.76 10.0 8.0 12.0 4.0 8.0 8.0 18 Bug Screen 0.76 2.0 8.0 - 12.0 2.0 8.0 8.0 19 Bug Screen 0.76 10.0 2.5 12.0 4.0 8.0 8.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Slab Perimeter 109 Slab Perimeter 128 Slab Perimeter 90 Insulation R -Val. Location JA IV Reference None No Insulation 26-A1 None No Insulation 26-A1 None No Insulation 26-A1 Condition Location/ Status Comments New Zone I Master Bedroom New Zone II Lvg.Fam.Dng.Ki New Zone III BR-1.2/1-aun Run Initiation Time: 07/06/06 15:09:12 Run Code: 1152223752 EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page:5 of 15 Certificate Of Compliance : Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 7/10/2006 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area U-Factorl SHGCZ Azm. Tilt Stat. Glazinq Type Comments 20. WindowRear(S)_ 21 Window Rear (S) _5..0. 70.0 _0.-4.9.0_NF_RC_0.4.0 -NERC 0.490 NFRC 0_40 NFRC 18.0_ 180 _9.0- NewMilgard-3310.,ALLDP_/F_IX 90 New Milgard 3310,AL-DP/FIX Zone_ll-Lvg.F_am.Dng.Ki_ Zone II Lvg.Fam.Dng.Ki 22 Window Rear (S)_ 14.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 23 Window Right (W) 35.0 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310 AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 24 Window Right (W)_ 7.0 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 25 Window Right (W)- 30.0 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310 AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 26 27 Window Window Right_(W)-6 Right (Wj 0 30.0 0.490 NFRC 0.40 NFRC 0.490 NFRC 0.40 NFRC 270 270 90 New 90 New Milgard a310AL-DP/FIX Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki Zone II Lvg.Fam.Dng.Ki 28 .19 30 Window Window Window Right_(W)- Rear Rear (S)_ (S)_ 6_0 80_0 16.0 0.490 NFRC 0.40 NFRC ---Q 570 NFRC --Q.38 NFRC 0.490 NFRC 0`40 NFRC 270 180 180 90 New 90 New 90 New Milgard 3310 AL-DP/FIX Milgard 450AL-DP-TB/SLDG Milgard 3310.AL-DP/FIX Zone II Lvg.Fam:Dng.Ki Zone II Lvg.Fam.Dng.Ki Zone II Lvg.Fam.Dng.Ki 31 Skylight Left (E)_ 4.0 0.440 NFRC 0_35 NFRC 90 0 New Velux FCM Comfort 75 LowE2 Zone III BR-1,2/1-aun 32 33 -Skylight-Left-(E)- Window Left (E)_ 4..0 10.0 0-4_4.0 NFRC 0:35 -NERC 0.570 NFRC 0_38 NFRC _90_ 90 Q NewVe.l.ux-F_CM Comfort7_5 Low.E2__Zone 90 New Milgard 450.AL-DP-TB/SLDG I.I.I_BR_1_,21aun Zone III BR-1.2/1-aun 34 Window Left (E) 3.0 0.570 NFRC 0_38 NFRC 90 90 New Milgard 450,AL-DP-TB/SLDG Zone III BR-1,2/Laun 35 Window Left (E)_ 24.0 0.570 NFRC 0_38 NFRC 90 90 New Milgard 450.AL-DP-TB/SLDG Zone III BR-1.2/Laun 36 Window Left (E) 10.0 0.570 NFRC 0_38 _NERC. 90 90 New Milgard 450,AL-DP-TB/SLDG Zone III BR-1,2/Laun 37 Window Rear (S)_ '12.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310 AL-DP/FIX Zone III BR-1,2/1-aun 38 1. Indicate Window Rear (S)_ source either from NFRC 48_0 -Q.570 NFRC -Q-.38 NFRC 180 or Table 116A. 2. Indicate source either from 80 New Milgard 450,AL-DP-TB/SLDGZone NFRC or Table 116B. III BR-1,2/Laun INTERIOR AND EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Len. Overhang Hgt. LExt. RExt. Left Fin Right Fin Dist.. Len. Hgt. Dist. Len. Hgt. 20 Bug Screen 0.76 2.0 2.5 12.0 2.0 8.0 8.0 21 Bug Screen 0.76 10.0 7.0 15.0 4.0 8.0 8.0 22 Bug Screen 0.76 2.0 7.0 15.0 2.0 8.0 8.0 23 Bug Screen 0.76 1Q0 3_5 _8_0 4.0 -OLO 8 0 24 Bug Screen 0.76 2.0 3.5 8.0 2.0 8.0 8.0 25 Bug Screen 0.76 10_0 3_0 12.0 4.0 8_0 8_0 26 Bug Screen 0.76 2.0 3.0 12.0 2.0 8.0 8.0 27 Bug Screen 0.76 10.0 3.0 16.0 4.0 8.0 8.0 28 Bug Screen 0.76 2.0 3.0 16.0 2.0 8.0 8.0 29 Bug Screen 0.76 10.0 8.0 23.0 4.0 8.0 8.0 30 Bug Screen 0.76 2.0 8.0 23.0 2.0 8.0 8.0 31 None 1.00 32 None 1.00 _ 33 Bug Screen 0.76 34 Bug Screen 0.76 35 Bug Screen 0.76 36 Bug Screen 0.76 _ 37 Bug Screen 0.76 _ 38 Bug Screen 0.76 8.0 6.0 8.0 4.0 8.0 8.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page:6 of 15 1 Certificate Of Compliance : Residential . (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 7/10/2006 Project Title Date FENESTRATION SURFACES True Cond. Location/ # Type Area U-Factorl SHGC2 Azm. Tilt Stat. Glazing Type Comments .3.9. Windo-w—Rear (.S.)_ 16.0_ _0.4.9.0NF_RC__0.40 _NERC 1-8.0_ _9.0_ NewMilgard_3.310.,AL-DP_/F_IX _Zone_Ill_BR_1.,2/.Lau❑ 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LEA REA Dist. Len. Hgt. Dist. Len. Hgt. 39 Bug Screen 0.76 1.5 . 8.0 8.0 2.0 8.0 8.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (so (in.) Cap. Cond. R -Val. JA IV Reference Status Comments PERIMETER LOSSES Insulation Condition Location/ Type Length R -Val. Location JA IV Reference Status Comments EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Paae:7 of 15 1 Certificate Of Compliance : Residential (Part 3 of 4) CF -1 R Lee Stirrette Main Residence .MB 258/69-70 Project Title HVAC SYSTEMS Date 7/10/2006 HVAC DISTRIBUTION Heating Minimum Cooling Minimum Condition Thermostat Location Type Eff Type Eff Status Type HVAC System 1 (Zone 1) Central Furnace 80% AFUE Split Air Conditioner 15.5 SEER New Setback HVAC System 2 Zone II) Central Furnace 80% AFUE Split Air Conditioner 13.5 SEER New Setback HVAC System 3 (Zone III) Central Furnace 80% AFUE Split Air Conditioner 15.5 SEER New Setback HVAC DISTRIBUTION WATER HEATING SYSTEMS Rated Tank Energy Duct Duct Condition Ducts Location Heating_ Cooling Location R -Value Status Tested? HVAC System 1 (Zone 1) Ducted Ducted Outdoors 6.0 New Yes HVAC System 2 (Zone ll) Ducted Ducted Outdoors 6.0 New Yes HVAC System 3 (Zone III) ' Ducted Ducted Outdoors 6.0 New Yes Hydronic Piping Pipe Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Rated Tank Energy Standby' Tank Insul. Water Heater # in Input Cap. Condition Factor Loss R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE' (%) Ext. A O Smith Water Products FPSH-75 Large Gas No Pipe Insulation 1 80,000 74 New 0.78 - 1.91% 0.0 Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length U— Add 1/2" Control # HP Type In Plenum Outside Buried Insulation 1 For small gas storage (rated input — 75000 Btu/hr), electric resistance and heat pump water heaters, list energy factor. For large gas storage water heaters (rated input > 75000 Btu/hr), list Rated Input, Recovery Efficiency and Standby Loss. For instantaneous gas water heaters, list Rated Input, and Recovery Efficiency. Contents EMS 2006 COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them.This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Name: Title/Firm: Gabriel Lujan & Associates Address: 45-175 Panorama Drive, Suite A Telephone: 760-674-8100 Lic. #: t0 I Enforcement Agency Name: Title/Firm: Address: Telephone Documentation Author Name: Edgar Torres Title/Firm: E.D.S. Address: 1310 2nd Street Coachella, CA 92236 Telephone: (760) 469-6195 (signature) (date) Certificate Of Compliance: Residential (Part 4 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 7/10/2006 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agency determines the adequacy of the justification, and may reject a building or design that otherwise complies based on the adequacy of the special tustitication and documentation suomitteo. Plan Field The DHW Svstem "A O Smith Water Products FRSH-75" is a Larqe Gas water heater with Pilot Loss = 0 btuh. The Roof "R-38 Roof Attic" includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual. The HVAC System "HVAC System 1 (Zone 1)" must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Areas. The HVAC System "HVAC System 3 (Zone Ill)' must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Areas, HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- approved HERS provider using CEC approved testing and/or verification methods and must be reported on the CF -4R installation certificate. Plan Field The HVAC System "HVAC System 1 (Zone 1)" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF4R. The HVAC System "HVAC System 1 (Zone 1)" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The HVAC System "HVAC System 2 (Zone II)" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF4R. The HVAC System "HVAC System 2 (Zone 11)" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The HVAC System "HVAC System 3 (Zone Ill)' incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "HVAC System 3 (Zone Ill)' incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. I-- EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Paoe:9 of 15 1 Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not DESCRIPTION ENFORCE - N/A DESIGNER MENT Building Envelope Measures § 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in metal frame ceiling. ❑ ❑X ❑ § 150(b): Loose fill insulation manufacturer's labeled R -Value: ❑ ❑ ❑ § 150(c): Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not ❑ ❑x ❑ apply to exterior mass walls). § 150(d): Minimum R-13 raised floor insulation in framed floors or equivalent U -factor. ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. 1. Masonry and factory -built fireplaces have: a. closable metal or glass door covering the entire opening of the firebox ❑ ❑x ❑ b. outside air intake with damper and control, flue damper and control ❑ ❑x ❑ 2. No continuous burning gas pilot lights allowed. ❑ ❑x ❑ § 150(f): Air retarding wrap installed to comply with§ 151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16 only. 1, ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor F] El ❑ permeance rate no greater than 2.0 perm/inch. § 118: - Insulation specified or installed meets insulation installation quality standards. Indicate type and ❑ O El CF -6R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. ❑ ❑x ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain Coefficient (SHGC), and infiltration certification. ❑ ❑x ❑ 3. Exterior doors and windows weatherstripped; all joints and penetrations caulked and sealed. ❑ ❑x ❑ Space Conditioning, Water Heating and Plumbing System Measures • r § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ ❑x ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACCA. ❑ ❑X ❑ § 150(i): Setback thermostat on all applicable heating and/or cooling systems. ❑ ❑x ❑ § 1500): Water system pipe and tank insulation and cooling systems line insulation. 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with ❑ ❑x ❑ insulation having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ ❑ ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire El❑x El length of recirculating sections of hot water pipes shall be insulated to Table 1506. 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source ❑ ❑x ❑ and indirect hot water tank shall be insulated to Table 150-B and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A.• ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due, to sunlight, moisture, equipment ❑ ❑x ❑ maintenance, and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ ❑ EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page: 10 of 15 0 Mandatory Measures Summary: Residential (Page 2 of 2) MF -1 R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supersede the items marked with an asterisk (*) below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Instructions: Check or initial applicable boxes when completed or check N/A if not applicable. ENFORCE - N/A DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604,191 ❑ 605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181 B or aerosol sealant that meets the requirements § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh ❑ or tape shall be used. Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than ❑ ❑X ❑ sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause ❑ reductions in the cross-sectional area of the ducts. dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ x ❑ duct tapes unless such tape is used in combination with mastic and draw bands. 119(d). ❑ a ❑ 4. Exhaust fan systems have back draft or automatic dampers. EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ ❑X ❑ dampers. 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ © ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. ❑ 0 ❑ 7. Flexible ducts cannot have porous inner cores. § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ Q . ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. 2. System is installed with: a. At least 36" of pipe between filter and heater for future solar heating. ❑ ❑ ❑ b. Cover for outdoor pools or outdoor spas. ❑ ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch. ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ❑ ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria ❑ ❑ ❑ Lighting Measures § 150(k)1: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table❑ X❑ ❑ 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ Q ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ ❑X ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ Q ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ Q ❑ controlled by an occupant sensor that complies with Section 1) 9(d) that does not turn on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are ❑ X❑ ❑ certified to ASTM E283 and labeled as air tight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ X❑ ❑ same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensor(s) certified to comply with Section 119(d). EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page: 11 of 15 Residential Kitchen Lighting Worksheet WS -SR Lee Stirrette Main Residence MB 258/69-70 - 7/10/2006 Project Title Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. a High Efficacy Luminaire Type High Efficacy? Watts Quantity Watts Other Watts (1) 26w Cmpct Fluor Triple 4 Pin Electronic Yes X No 28.0 x 8 = 224 or (1) 2 ft Fluorescent T8 Electronic Yes X1 No 1 22.0 x 4 88 or Yes No x = or Yes No x _ or Yes No x = or Yes No x = or Yes No- x = or Yes No x = or Yes No x or Yes No x. = or Yes No x = or Yes No ; x . = or Yes No - x' or Yes No x - or Yes 'No. x = or Yes No x = or Yes No. _ x _ or Yes No x = or Yes No x - or Yes No x = or • Total A: 312 B: 0 COMPLIES IF A >_ B YES L- NO ❑ ff HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Lee Stirrette Main Residence MB 258/69-70 7/10/2006 SYSTEM NAME FLOOR AREA HVAC System 1 (Zone 1) 1,035 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 Heating System Output per System 80,000 Total Output (Btuh) 80,000 Output (Btuh/sqft) 77.3 Cooling System Output per System 35,500 Total Output (Btuh) 35,500 Total Output (Tons) 3.0 Total Output (Btuh/sqft) 34.3 Total Output (sgft/Ton) 349.9 Air System CFM per System 1,200 Airflow (cfm) 1,200 Airflow (cfm/sqft) 1.16 Airflow (cfm/Ton) 405.6 Outside Air (%) I 0.0 Outside Air (cfm/sqft) 0.00 ote: values above given at ARI conditions :ATING SYSTEM PSYCHROMETRICS 26.0 of 69.1 of 71.0 OF Outside Air 0 cfm 69.1 of COOLING S 111.0 / 77.6 of Outside Air 0 cfm 76.9/62.9 of Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM Sensiblel Latent CFM I Sensible 658 13,303 1,630 226 15,089 0 1,208 1,202 0 0 0 0 0 01 0 2,480 -2,480 1,208 1,202 18,198 1,6301. 15,013 York CZE36/PV8B16100/G1FA48 29,151 1,835 80,000 Total Adjusted System Output 29 151 1,835 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am -earn Temperatures at Time of Heating Peak) 133.6 of Supply Fan Heating Coil 1200 cfm Return Air Ducts CHROMETRICS (Airstream Temperatures at Time of Cc 0 76.9 / 62.9 F 78.9 / 63.6 of M 56.1 / 54.8 °F Supply Fan Cooling Coil 1200 cfm Supply Air Ducts 132.7 of ROOMS 70.0 of Supply Air Ducts 57.0 / 55.2 of 47.5% R.H. ROOMS 76.0 / 62.6 of Return Air Ducts IEI EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page: 13 of 15 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME i DATE Lee Stirrette Main Residence MB 258/69-70 7/10/2006 SYSTEM NAME FLOOR AREA HVAC System 2 Zone II) 1,950 SYSTEM LOAD I I EATING S 26.0 of >0 Outside Air 0 cfm 68.6 of 68.6 of 70.3 of --(�7� Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts COIL COOLING PEAK . COIL HTG. PEAK CFM I Sensible Latent CFM I Sensible 1,353 29,966 2,718 729 32,814 0 77.5 l 61.9 of 79.2 / 62.5 of 53.7 / 52.4 of 2,721 2,614 0 0 0 0 0 0 0 3,086 55.2 / 53.0 of -3,086 2,721 2,614 TOTAL SYSTEM LOAD 38,494 2,718 34,955 York CZE60/PV8C20100/G2FD60 46,833 0 80,000 Total Adjusted System Output x6,833 0 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am eam Temperatures at Time of Heating Peak) 113.70F Supply Fan Heating Coil 1730 cfm Return Air Ducts Supply Air Ducts 112.3 of ROOMS 70.0 of (COOLING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak) 111.0 / 77.6 of 77.5 l 61.9 of 79.2 / 62.5 of 53.7 / 52.4 of Supply Air Ducts Outside Air O f 0 cfm Supply Fan Cooling Coil 55.2 / 53.0 of 1730 cfm '43.5% ROOMS R.H. 77.5/61.90F 76.0/61.4OF Return Air Ducts EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page: 14 of 15 ' - 1 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Lee Stirrette Main Residence -MB 258/69-70 7/10/2006 SYSTEM NAME FLOOR AREA HVAC System 3 (Zone III) 993 Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM I Sensible Latent CFM I Sensible 837 16,476 1,780 238 15,859 0 1,496 1,263 0 0 o' 0 0 0 0 2,480 -2,480 1,496 1,263 21,948 1,780 15,906 HVAC EQUIPMENT SELECTION York CZE36/PV8B161 00/G1 FA48- 29,100 2,010 80,000 Total Adjusted System Output29,100 2,010 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am 1HEATING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Heating Peak) 0 26.0 OF 69.0 OF 71.0 OF 133.6 OF Supply Air Ducts Outside Air ` '� 0 cfm 132.6 °F Supply Fan Heating Coil 1200 cfm ROOMS 69.0 OF 70.0 °F Return Air Ducts 1000LING SYSTEM PSYCHROMETRICS (Airstream Temperatures at Time of Cooling Peak) 111.0/77.60E- 77.2 ! 63.1 OF 79.1 / 63.8 OF 56.3 / 55.1 OF O Supply Air Ducts Outside Air 0 cfm Supply Fan Cooling Coil 57.5 / 55.5 of 1200 cfm 48.1% R.H. ROOMS 77.2/63.1 °F 76.0 162.7 OF I I% Return Air Ducts `S EnergyPro 4.1 by EnergySoft User Number: 6688 Job Number: 03142006 Page:15 of 15 1 TITLE 24 REPORT Title 24 Report for:. Lee Stirrette Main Residence—MB 258/69-70 APN,762-250-017, Lot 17 Vista Lazo La QUinta, Ca. 92253 9065, Zo 90 I V1 "TA Project Designer: Gabriel Lujan & Associates 45-175 Panorama Drive, Suite A Palm Desert, Ca. 92260 760-674-8100 Report Prepared By: Dave Border Desert City's Plan Review & 2 Title '01W A C 30209 San El Jay CITY OV LA Q fy, DEPT. Cathedral City, CA-9223 BUILDING & SAVE N. 13 F& (760) 8614-7311 ®V E® CONSTRUCTS FOR CQ DAT E Job Number: 03142006 Date: 12/1/2006 The EnergyPro computer program has been used to perform the calculations summarized in this compliance report. This program has approval and is authorized by the California Energy Commission for use with both the Residential and Nonresidential 2005 Building Energy Efficiency Standards. This program developed by EnergySoft, LLC - www.e nergysoft. coin. EnergyPro 4.3 by EnergySoft Job Number. 03142006 User Number: 6774 ' TABLE OF CONTENTS Cover Page 1 Table of Contents 2 Form CF -1 R Certificate of Compliance 3 Form MF -1 R Mandatory Measures Summary 10 Form WS -5R Residential Kitchen Lighting 12 HVAC System Heating and Cooling Loads Summary. 13 EnergyPro 4,3 by EnergySoft Job Number: 03142006 User Number: 6774 t t ' TABLE OF CONTENTS Cover Page 1 Table of Contents 2 Form CF -1 R Certificate of Compliance 3 Form MF -1 R Mandatory Measures Summary 10 Form WS -5R Residential Kitchen Lighting 12 HVAC System Heating and Cooling Loads Summary. 13 EnergyPro 4,3 by EnergySoft Job Number: 03142006 User Number: 6774 t ' TABLE OF CONTENTS Cover Page 1 Table of Contents 2 Form CF -1 R Certificate of Compliance 3 Form MF -1 R Mandatory Measures Summary 10 Form WS -5R Residential Kitchen Lighting 12 HVAC System Heating and Cooling Loads Summary. 13 EnergyPro 4,3 by EnergySoft Job Number: 03142006 User Number: 6774 Certificate Of Compliance: Residential (Part 1 of 4) CF -1 R I pA Stirrette Main Residence MR Project Title — APN 762-250-017, 1 17 Vista I azo 258/69-70 I a Qijinta 12/1/2006 Date at Project Address Building Permit # Desert Qity's Plan Review R Title 24's (760) 864-7311 Documentation Author Telephone Plan Check/Date FnP_rgyPro Compliance Method 15 Field Check/Date Climate Zone TDV Standard Proposed Compliance (kBtu/sf-yr) Design Design Margin Space Heating 2.01 2.40 -0.39 Space Cooling 63.98 55.54 8.44 Fans 9.09 8.14 0.96 Domestic Hot Water 6.45 8.67 -2.22 Pumps 0.00 0.14 -0..14 Totals 81.54 74.89 6.65 Percent better than Standard: 8.2% BUILDING COMPLIES - HERS VERIFICATION REQUIRED Building Type: W Single Family ❑ Addition Total Conditioned Floor Area: 3,978 ft2 ❑ Multi Family ❑ Existing + Add/Alt Existing Floor Area: n/a ft2 Building Front Orientation: I (N) 0 deg Raised Floor Area: 0 ft2 Fuel Type: Natural Gas Slab on Grade Area: 3,978 ft2 Fenestration: ' Average Ceiling Height: 11.0 ft Area: 988 ft2 Avg. U: 0.52 Ratio: 24.8% Avg. SHGC: 0.39 BUILDING ZONE INFORMATION Zone Name Floor Area Volume Number of Dwelling Units: 1.00 Number of Stories: 1 # of Units Thermostat Vent Zone Type Type Hgt. Area Cleeping Sleep*ngStaf n/a Conditioned Setback _� n/a Sleeping SleepinaStat n/a OPAQUE SURFACES Insulation Act. Gains Condition Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Y / N Status JA IV Reference Location / Comments i Certificate Of Compliance: Residential Existing Floor Area: (Part 1 of 4) CF -1 R IPP Stirrette Mall] Resi enrp—MR 958169-70 Project Title QPN 769-250-01711ot 17 Vista I I Quinta 0 12/1/2006 Date azo Project Address a ft2 Building Permit # Desert rite's Plan Review & Title 24's ft (760) 864-7311 1.00 Documentatiort Author Number of Stories: Telephone Plan Check/Date FnprgyPrn Compliance Method 15 Climate Zone Field Check/Date TDV Standard Proposed Compliance (kBtu/sf-yr) Design Design Margin Space Heating 2.01 2.40 -0.39 Space Cooling 63.98. 55.54 8.44 Fans' 9.09 8.14 0.96 Domestic Hot Water 6.45 8.67 -2.22 Pumps 0.00 0.14 -0.14 Totals 81.54 74.89 6.65 Percent better than Standard: 8.2% Building Type: W Single Family ❑ Addition ❑ Multi Family ❑ Existing + Add/Alt Building Front Orientation: (N) 0 deg Fuel Type: Natural Gas Fenestration: Area: 988 ft2 , Avg. U: Ratio: 24.8% Avg. SHGC: BUILDING ZONE INFORMATION Zone Name Floor Area 0.52 0.39 Total Conditioned Floor Area: 3,978 ft2 Existing Floor Area: n/a ft2 Raised Floor Area: 0 ft2 Slab on Grade Area: 3,978 ft2 Average Ceiling Height: 11.0 ft Number of Dwelling Units: 1.00 Number of Stories: 1 # of Thermostat Vent Volume Units Zone Type Type Hgt. Area OPAQUE SURFACES Insulation Act. Gains Condition Type Frame Area U -Fac. Cay. Cont. Azm. Tilt Y / N Status JA IV Reference Location / Comments Wall Wood 55 0 074 R-19 RR n 0 _0 40 a ❑New ng -AS Zone III RR -1,2/1 nun ❑ ❑❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ HH F-1 r-1 ❑❑ ❑❑ ❑❑ F1 F-1 ❑❑ F] F1 i Run Initiation Time: 12/01/06 10:30:28 Run Code: 1164997828 EnergyPro 4.3 by EnergySoft User Number. 6774 Job Number: 03142006 - Page:4 of 15 - � sr Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Left Fin Right Fin # Exterior Shade Type SHGC Date Wd. FENESTRATION SURFACES Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 None 1.00 True Cond. Location/ # Type Area LI -Factor' CZ Azm. Tilt Stat. Glazing Type Comments L Skylight Right (WI -SHG 4.0 0.440 NFRC JLU NFRC AZO_ �4_ New Velux FCM Comfort 75 LowF2 7nnp I Master Bedroom 2 Skylight Right (W) 4.0 0.440 NFRC 0_35 NFRC 270 0 New Velux FCM Comfort 75 LowE2 Zone I Master Bedroom 3 Window Left (SE) 64.0 0.570 NFRC 0_38 NFRC 135 90 New Milgard 450.AL-DP-TB/SLDG Zone I Master Bedroom 4 Window Left (SE) 13.3 0.490 NFRC 0_40 NFRC 135 90 New Milgard 3310,AL-DP/FIX Zone I Master Bedroom 5 Window Rear (S) 32.0 0.490 NFRC 0040 NFRC 180 90 New Milgard 3310.AL-DP/FIX Zone I Master Bedroom 6 Window Right (M 36.0 0.490 NFRC 0040 NFRC 270 90 New Milgard 3310.AL-DP/FIX Zone I Master Bedroom Z Window Front (N) 12.0 0.490 NFRC 0.40 NFRC 0 90 New Milgard 3310.AL-13P/FIX Zone II Lvg.Fam.Dng.Ki 8 Window Front (N) 18.0 0.490 NFRC 0_40 NFRC 0 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 9 Window Front (N) 1200 00490 NFRC X40 NFRC 0 90 New Milgard 3310.AL-DP/FIX Zone II Lvg.Fam.Dng.Ki -M Window Front (N) 48.0 0.49 QFRC 0.40 NFRC 0 90 New Milgard 3310.AL-DP Zone II Lvg.Fam.Dng.Ki 11 Window Front (N) 10.0 0.490 NFRC 0_40 NFRC 0 90 New Milgard 3310.AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 12 Window Front (N) 30.0 0.490 NFRC 0040 NFRC 0 90 New Milgard 3310.AL-DP/FIX Zone II Lvg.Fam.Dng.Ki -1a Window Front (N) 30.0 0.570 NFRC0.38 NFRC 0 9Q New Mjlgard 450 -AL -DP -TR/ -';I DG Zone II LQ-Fam.Dng.Ki 14 Window Rear (S) 80.0 0.570 NFRC 0_38 NFRC 180 90 New Milgard 450,AL-DP-TB/SLDG Zone II Lvg.Fam.Dng.Ki 15 Window Rear (S) 13.3 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone II Lvq.Fam.Dnq.Ki 16 Window Rear (S) 35.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone II Lvq.Fam.Dnq.Ki 17 Window Rear (S) 5.8 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone II Lvq.Fam.Dnq.Ki 18 Window Rear (S) ' 80.0 0.570 NFRC 0_38 NFRC 180 90 New Milgard 450,AL-DP-TB/SLDG Zone II Lvg.Fam.Dng.Ki 19 Window Rear (S) 13.3 0.490 NFRC 0.40 NFRC 180 90 New Milgard 3310 AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B. INTERIOR AND EXTERIOR SHADING Window Overhang Left Fin Right Fin # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Dist. Len. Hgt. Dist. Len. Hgt. 1 None 1.00 2 None 1.00 3 Bug Screen 0.76 8.0 8.0 8.0 4.0 8.0 8.0 4 Bug Screen 0.76 1.8 8.0 8.0 2.0 8.0 8.0 5 Bug Screen 0.76 _ 6 Bug Screen 0.76 7 Bug Screen 0.76 8.0 1.6 9.0 4.0 9.0 9.0 8 Bug Screen 0.76 9.0 2.0 9.0 4.0 9.0 9.0 _ 9 Bug Screen 0.76 CO 1.6 9.0 4.0 9.0 9.0 10 Bug Screen 0.76 8.0 6.0 9.0 4.0 9.0 9.0 11 Bug Screen 0.76 1.8 6.0 12.0 2.0 8.0 8.0 12 Bug Screen 0.76 13 Bug Screen 0.76 14 Bug Screen 0.76 10.0 _8.0 8.0 4.0 8.0 8.0 15 Bug Screen 0.76 1.8 8.0 8.0 2.0 8.0 8.0 16 Bug Screen 0.76 10.0 3.5 8.0 4.0 8.0 8.0 17 Bug Screen 0.76 1.8 3.5 8.0 _2.0 8.0 8.0 18 Bug Screen 0.76 10.0 8.0 12.0 4.0 8.0 8.0 19 Bug Screen 0.76 1.8 8.0 12.0 2.0 8.0 8.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments Insulation Condition Location/ PERIMETER LOSSES Type Length R -Val. Location JA IV Reference Status Comments Slab Perimeter 109 None No Insulation 26-A1 New Zone I Master Bedroom Slab Perimeter 128 None No Insulation 26-A1 New Zone II Lvg.Fam.Dng.Ki Slab Perimeter 90 None No Insulation .26 -Al New Zone III BR-1.2/1-aun Run Initiation Time: 12/01/06 10:30:28 Run Code: 1164997828 EnergyPio*3 by EnergySoft User Number: 6774 Job Number: 03142006 Page:5 of 15 Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Date FENESTRATION SURFACES # Type Area U -Factor' SHGCZ True Cond. + Azm. Tilt Stat. Glazing Type Location/ Comments Overhang Hgt. LExt. 2Q 21 Window Window Rear Rear (S) (S) 250 049 NFRC 04 NFRC 180 4.2 0.490 NFRC 0.40 NFRC 180 A0_ New Milgard 3310 AL-DP/FIX 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki Zone II Lvq.Fam.Dnq.Ki 4.0 8.0 22 Window Rear (S) 70.0 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310.AL-DP/FIX Zone II Lvg.Fam.Dnq.Ki 22 23 Window Rear (S) 11.7 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone II Lvq.Fam.Dnq.Ki 0.76 24 Window Right (W) 35.0 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki 3.5 25 Window Right (W) 5.8 0.490 NFRC 0_40 NFRC 270 90 New Milgard 3310.AL-DP/1FIX Zone II Lvq.Fam.Dnq.Ki 2..4 8.0 24 Window Right (a 30.0 0.490 NFRC__.40 NFRC 270 90 New Milgard 3310.AL-DP/FIX Zone II Lyg.Fam.Dnq Ki 27 Window Right (W) 5.0 0.490 NFRC 0.40 NFRC 270 90 New Milgard 3310,AL-DP/FIX Zone II Lvg.Fam.Dng.Ki Bug Screen 288 Window RightV(M 16.0 30.0 0.490 NFRC 0.40 NFRC 270 90 New Milgard 3310.AL-DP/FIX Zone II Lyg.Fam.Dng.Ki 0.76 2,Q Window Right (UVB 5.0 0.499NFRQ240 NFRC 270 90 New Milgard 3310.AL-DP/FIX Zone II Lyg.Fam.Dng.Ki 10.0 30 Window Rear (S) 80.0 0.570 NFRC 0_38 NFRC 180 90 New Milgard 450.AL-DP-TB/SLDG Zone II Lvg.Fam.Dng.Ki 23.0 31 Window Rear (S) 13.3 0.490 NFRC 0_40 NFRC 180 90 New Milgard 3310.AL-DP/FIX Zone II Lvq.Fam.Dnq.Ki Skylight Left (Fa 4.0 0.449 NFIRQ _QM NFRC _90 0_ New Velux FCM Comfort 75 LowF9 Zone III BR-11,2/1-aun 33 Skylight Left (E) 4.0 0.440 NFRC 0_35 NFRC 90 0 New Velux FCM Comfort 75 LowE2 Zone III BR-1.2/1-aun 34 Window Left (E) 10.0 0.480 NFRC 0_40 NFRC 90 90 New Pacificaccent Glass Block 8x8x3 Zone III BR-1,2/Laun 35 Window Left (E) 4.0 0.480 NFRC 0_40 NFRC 90 90 New Pacificaccent Glass Block 8x8x3 Zone III BR-1,2/Laun 36 Window Left (E) 30.0 0.570 NFRC 0_38 NFRC: 90 90 New Milgard 450,AL-DP-TB/SLDG Zone III BR-1,2/Laun 37 Window Left (E) 10.0 0.480 NFRC 0_40 NFRC 90 90 New Pacificaccent Glass Block 8x8x3 Zone III BR-1,2/Laun 38 Window Rear (S) 12.0 0.48 NFRC 0.40 NFRC 180 90 New Pacificaccent Glass Block 8x8x3 Zone III BR-1.2/Laun 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 116B. INTERIOR AND EXTERIOR SHADING # Exterior Shade Type SHGC Window Hgt. Wd. Len. Overhang Hgt. LExt. Left Fin Right Fin REA Dist. Len. Hgt. Dist. Len. Hgt. 20 Bug Screen 0.76 10.0 2.5 12.0 4.0 8.0 8.0 21 Bug Screen 0.76 1.8 2.0 12.0 2.0 8.0 8.0 22 Bug Screen 0.76 10.0 7.0 15.0 4.0 8.0 8.0 23 Bug Screen 0.76 1.8 7.0 15.0 2 0 8.0 8.0 _ 24 Bug Screen, 0.76 10.0 3.5 8.0 4.0 8.0 8.0 _ 25 Bug Screen 0.76 1.83 5 8.0 2..4 8.0 8.0 26 Bug Screen 0.76 10.0 3.0 12.0 4.0 8.0 8.0 27 Bug Screen 0.76 1.8 3.0 12.0 2.0 8.0 8.0 28 Bug Screen 0.76 10.0 3.0 16.0 4.0 8.0 8.0 29 Bug Screen 0.76 1.8 3.0 16.0 2.0 8.0 8.0 30 Bug Screen 0.76 10.0 8.0 23.0 4.0 8.0 8.0 31 Bug Screen 0.76 1.8 8.0 23.0 2.0 8.0 8.0 32 None 1.00 33 None 1.00 34 Bug Screen 0.76 35 Bug Screen 0.76 36 Bug Screen 0.76 37 Bug Screen 0.76 38 Bug Screen 0.76 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Condition Location/ Type (sf) (in.) Cap. Cond. R -Val. JA IV Reference Status Comments Insulation Location/ _ Condition PERIMETER LOSSES Type Length R -Val. Location JA IV Reference Status Comments Run Initiation Time: 12/01/06 10:30:28 Run Code: 1164997828 EnergyPro 4.3 by EnergySoft User Number: 6774 Job Number: 03142006 Page:6 of 15 R Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Date FENESTRATION SURFACES ' True Cond. Location/ # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Comments M Window Rear (S) 48.0 _0 57p NFRC -0-M FRC- 180_ _ 90 New Milgard 450-AL-DP-TR/SI DG Zone III BR-1,2/Laun 40 Window Rear (S) 10.0 0.490 NFRC 0.40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone III BR-1,2/1-aun c R Certificate Of Compliance: Residential (Part 2 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Date FENESTRATION SURFACES ' True Cond. Location/ # Type Area U -Factor' SHGCZ Azm. Tilt Stat. Glazing Type Comments M Window Rear (S) 48.0 _0 57p NFRC -0-M FRC- 180_ _ 90 New Milgard 450-AL-DP-TR/SI DG Zone III BR-1,2/Laun 40 Window Rear (S) 10.0 0.490 NFRC 0.40 NFRC 180 90 New Milgard 3310,AL-DP/FIX Zone III BR-1,2/1-aun Run Initiation Time: 12/01/06 10:30:28 Run Code: 1164997828 EnergyPro 4.3 by EnergySoft User Number: 6774 Job Number: 03142006 Page:7 of 15 1. Indicate source either from NFRC or Table 116A. 2. Indicate source either from NFRC or Table 1168. INTERIOR AND EXTERIOR SHADING Window Overhang # Exterior Shade Type SHGC Hgt. Wd. Len. Hgt. LExt. REA Left Fin Right Fin Dist. Len. Hgt. Dist. Len. Hgt. 39 Bug Screen 0.76 8.0 6.0 40 Bug Screen 0.76 1.8 6.0 THERMAL MASS FOR HIGH MASS DESIGN Area Thick. Heat Inside Type (sf) (in.) Cap. Cond. R -Val. 8.0 4.0 8.0 8.0 8.0 2.0 8.0 8.0 JA IV Reference-' Condition Status _ Location/ Comments PERIMETER LOSSES Type Length R -Val. Insulation Location JA IV Reference Condition Status Location/ Comments Run Initiation Time: 12/01/06 10:30:28 Run Code: 1164997828 EnergyPro 4.3 by EnergySoft User Number: 6774 Job Number: 03142006 Page:7 of 15 WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext. Takagi T -K2 Large Gas All Pipes Ins Certificate Of Compliance .1Ke di ential (Part 3 of 4) CF -1 R 0.0— .0Rheem Rhe rnRHGPRO 75-75 Small Gas Recirc/Time+Temp 1 75.000 75 New 0.49 n/a ;- Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Multi -Family Central Water Heating Details Date j = HVAC SYSTEMS Hot Water Pump Hot Water Piping Length (ft) Add 1/2" t. Heating ' Minimum Cooling Minimum Condition Thermostat Location Type Eff Type Eff Status Type HVAC System 1 (Zone q Central Furnace 80% AFUE Split Air Conditioner 15.5 SEER New Setback HVAC System 2 (Zone ll) .'Central Furnace 80% AFUE Split Air Conditioner 13.5 SEER New Setback HVAC System 3 (Zone III) Central Furnace 80% AFUE Split Air Conditioner 15.5 SEER New Setback HVAC DISTRIBUTION Duct Duct Condition , Ducts Location Heating Cooling Location R -Value Status Tested? ' HVAC System 1 (Zone 1) Ducted Ducted Outdoors 4.2 New Yes HVAC System 2 (Zone II) "Ducted Ducted Outdoors 4.2 New Yes HVAC System 3 (Zone III) Ducted Ducted 'Outdoors 4.2 New Yes Hydronic Piping Pipe' , . Pipe Insul. System Name Length Diameter Thick. WATER HEATING SYSTEMS Rated Tank Energy Tank Insul. Water Heater # in Input Cap. Condition Factor Standby R -Value System Name Type Distribution Syst. (Btu/hr) (gal) Status or RE Loss (%) Ext. Takagi T -K2 Large Gas All Pipes Ins 1 185,000 0 New 0.85 0.00% 0.0— .0Rheem Rhe rnRHGPRO 75-75 Small Gas Recirc/Time+Temp 1 75.000 75 New 0.49 n/a n/a Multi -Family Central Water Heating Details Hot Water Pump Hot Water Piping Length (ft) Add 1/2" Control # HP Type In Plenum Outside Buried Insulation REMARKS :opyright Contents EMS 2006 COMPLIANCE STATEMENT This certificate of compliance lists the building features and specifications needed to comply with Title 24, Parts 1 and 6 of the California Code of Regulations, and the administrative regulations to implement them. This certificate has been signed by the individual with overall design responsibility. The undersigned recognizes that compliance using duct design, duct sealing, verification of refrigerant charge and TXVs, insulation installation quality, and building envelope sealing require installer testing and certification and field verification by an approved HERS rater. Designer or Owner (per Business & Professions Code) Documentation Author , Name: z Name: Dave Border Title/Firm: Gabriel Wan & Associates Title/Firm: Desert City's Plan Review & Title 24's Address:' 45-175 Panorama Drive, Suite A Address: 30209 San EI Jay Palm Desert, Ca. 92260 Cathedral City, CA 92234 Telephone: 760-674-8100 Lic. #: Telephone: 760 864-731 GYo d/ D (signature) (date) (sign (date) Enforcement Agency �. Name: Title/Firm: Address: _ STAMP Telephone: ' (signature) (date) I EnergyPro 4.3 by EnergySoft User Number. 6774 Job Number: 03142006 Certificate Of Compliance_ : Residential (Part 4 of 4) CF -1 R Lee Stirrette Main Residence MB 258/69-70 12/1/2006 Project Title Date Special Features and Modeling Assumptions The local enforcement agency should pay special attention to the items specified in this checklist. These items require special written justification and documentation, and special verification to be used with the performance approach. The local enforcement agencv determines the adequacy of the justification, and may refect a building or design that otherwise complies based on the Idequacy of the special justification and documentation submitted. Plan I Field The DHW System 'Takagi T -K2" is a Large Gas water heater with Pilot Loss = 0 btuh. The Roof "R-38 Roof Attic" includes credit for a Radiant Barrier installed per Section 3.3.3 of the Residential Manual. The HVAC System "HVAC System 1 (Zone 1)" must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Areas. The HVAC System "HVAC System 3 (Zone III)" must meet all CEC Criteria for a Zonally Controlled system serving only Sleeping Area . HERS Required Verification Items in this section require field testing and/or verification by a certified home energy rater under the supervision of a CEC- approved HERS provider using CEC approved testing and/or verification methods and must be reported on the CF -4R Plan Field inefalla}i— — ifi—ta The HVAC System "HVAC System 1 (Zone 1)" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "HVAC System 1 (Zone 1)" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The HVAC System "HVAC System 2 (Zone 11)" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "HVAC System 2 (Zone II)" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. The HVAC System "HVAC System 3 (Zone III)" incorporates HERS verified Duct Leakage. Target leakage is calculated and documented on the CF -4R. The HVAC System "HVAC System 3 (Zone III)" incorporates a HERS verified Refrigerant Charge test or a HERS verified Thermostatic Expansion Valve. EnergyPro 4.3 by EnergySoft User Number: 6774 Job Number: 03142006 Page:9 of 15 •Y i 1 Mandatory Measures Summary: Residential (Page 1 of 2) MF -1 R NOTE:. Lownse residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance Y requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether ' ...w they are shown elsewhere in the documents or on this checklist only. DESCRIPTION Check or initial applicable boxes or check NA if not applicable and included with the ENFORCE - permit application documentation., NIA DESIGNER MENT Building Envelope Measures § 150(a): Minimum R-19 in wood ceiling insulation or equivalent U -factor in'metal frame ceiling. ❑ 0 ❑ § 150(b): Loose fill insulation manufacturers labeled R -Value ' ❑ ❑ ❑ § 150(c):. Minimum R-13 wall insulation in wood framed walls or equivalent U -factor in metal frame walls (does not. ❑ ❑x ❑ apply to exterior mass walls). r �§ 150(d): Minimum R-13 raised floor insulation in framed Floorsor equivalent U-fac tor. , ❑ ❑ ❑ § 150(e): Installation of Fireplaces, Decorative Gas Appliances and Gas Logs. r 1: Masonry and factory -built fireplaces have: a. closable metal or glass door covering the entire opening of the firebox w' ❑ Q . ❑ b, outside air intake with damper and control, flue damper and control ❑ 0 ❑ 2. No continuous burning gas pilot lights allowed. -M m,. ❑ ❑X ❑ § I50(f): Air retarding wrap installed to comply with §151 meets requirements specified in the ACM Residential Manual. ❑ ❑ ❑ § 150(g): Vapor barriers mandatory in Climate Zones 14 and 16,only. " ❑ ❑ ❑ § 150(1): Slab edge insulation - water absorption rate for the insulation alone without facings no greater than 0.3%, water vapor ❑ ❑ ❑ ' permeance rate no greater than 2.0 pem-dinch. a . § 118: Insulation specked or installed meets insulation installation quality standards. Indicate type and include ❑ a ❑+ CF -6R Form: § 116-17: Fenestration Products, Exterior Doors, and Infiltration/Exfiltration Controls. 1. Doors and windows between conditioned and unconditioned spaces designed to limit air leakage. - ❑ ❑ 2. Fenestration products (except field fabricated) have label with certified U -Factor, certified Solar Heat Gain ❑ Q ❑ Coefficient (SHGC), and infiltration certification. 3. -Exterior doorsand windows weatherstripped; all joints and penetrations caulked and sealed. r ❑ ❑X ❑ Space Conditioning, Water Heating and Plumbing System Measures § 110-13: HVAC equipment, water heaters, showerheads and faucets certified by the Energy Commission. ❑ Q ❑ § 150(h): Heating and/or cooling loads calculated in accordance with ASHRAE, SMACNA or ACOA, ❑ E ❑, § 150(i): Setback thermostat on all applicable heating and/or cooling systems., ❑ ❑X ❑ - - t § 1500): Water system pipe and tank insulation and cooling systems line insulation. , 1. Storage gas water heaters rated with an Energy Factor less than 0.58 must be externally wrapped with insulation' ❑ ER ❑ • having an installed thermal resistance of R-12 or greater. 2. Back-up tanks for solar systems, unfired storage tanks, or other indirect hot water tanks have R-12 external ❑ ❑ ❑ insulation or R-16 internal insulation and indicated on the exterior of the tank showing the R -value. 3. The following piping is insulated according to Table 150-A/B or Equation 150-A Insulation Thickness: 1. First 5 feet of hot and cold water pipes closest to water heater tank, non -recirculating systems, and entire 4 ❑ ❑x ❑ length of recirculating sections of hot water pipes shall be insulated to Table 1508. ❑ ❑X ❑ 2. Cooling system piping (suction, chilled water, or brine lines), piping insulated between heating source and indirect hot water tank shall be insulated to Table 150-6 and Equation 150-A. 4. Steam hydronic heating systems or hot water systems > 15 psi, meet requirements of Table 123-A. ❑ ❑ ❑ 5. Insulation must be protected from damage, including that due to sunlight, moisture, equipment maintenance, ❑ 0 ❑ and wind. 6. Insulation for chilled water piping and refrigerant suction piping includes a vapor retardant or is enclosed ❑ ❑ ❑ entirely in conditioned space. 7. Solar water -heating systems/collectors are certified by the Solar Rating and Certification Corporation. ❑ ❑ - • ❑ EnergyPro 4.3 by EnergySoft User Number. 6774* Job Number: 03142006 Page: 10 of 15 Mandatory Measures Summarv: Residential (Page 2 of 2) MFA R NOTE: Lowrise residential buildings subject to the Standards must contain these measures regardless of the compliance approach used. More stringent compliance requirements from the Certificate of Compliance supercede the items marked with an asterisk (') below. When this checklist is incorporated into the permit documents, the features noted shall be considered by all parties as minimum component performance specifications for the mandatory measures whether they are shown elsewhere in the documents or on this checklist only. Instructions: Check or initial applicable boxes when completed or check N/A if not ENFORCE - DESCRIPTION applicable. NIA DESIGNER MENT Space Conditioning, Water Heating and Plumbing System Measures: (continued) § 150(m): Ducts and Fans 1. All ducts and plenums installed, sealed and insulated to meet the requirements of the CMC Sections 601, 602, 603, 604, ❑ ❑X ❑ 605, and Standard 6-5; supply -air and return -air ducts and plenums are insulated to a minumum installed level of R-4.2 or enclosed entirely in conditioned space. Openings shall be sealed with mastic, tape or other duct -closure system that meets the applicable requirements of UL 181, UL 181A, or UL 181B or aerosol sealant that meets the requirements of UL 723. If mastic or tape is used to seal openings greater than 1/4 inch, the combination of mastic and either mesh or tape shall be used. + 2. Building cavities, support platforms for air handlers, and plenums defined or constructed with materials other than 11 ❑X El + sealed sheet metal, duct board or flexible duct shall not be used for conveying conditioned air. Building cavities and support platforms may contain ducts. Ducts installed in cavities and support platforms shall not be compressed to cause reductions in the cross-sectional area of the ducts. 3. Joints and seams of duct systems and their components shall not be sealed with cloth back rubber adhesive ❑ X❑ ❑ duct tapes unless such tape is used in combination with mastic and draw bands. ❑ ® ❑ 4. Exhaust fan systems have back draft or automatic dampers. 5. Gravity ventilating systems serving conditioned space have either automatic or readily accessible, manually operating ❑ Q ❑A dampers. 6. Protection of Insulation. Insulation shall be protected from damage, including that due to sunlight, moisture, equipment ❑ X❑ ❑ maintenance, and wind. Cellular foam insulation shall be protected as above or painted with a coating that is water retardant and provides shielding from solar radiation that can cause degradation of the material. ❑ ❑ 7: Flexible ducts cannot have porous inner cores. § 114: Pool and Spa Heating Systems and Equipment 1. A thermal efficiency that complies with the Appliance Efficiency Regulations, on-off switch mounted outside of the ❑ Q ❑ heater, weatherproof operating instructions, no electric resistance heating and no pilot light. 2. System is installed with: ❑ - ❑ ❑ a. At least 36" of pipe between filter and heater for future solar heating. b. Cover for outdoor pools or outdoor spas. ❑ ❑ ❑ 3. Pool system has directional inlets and a circulation pump time switch.' ❑ ❑ ❑ § 115: Gas fired fan -type central furnaces, pool heaters, spa heaters or household cooking appliances have no continuously ❑ ® ❑ burning pilot light. (Exception: Non -electrical cooking appliances with pilot < 150 Btu/hr) § 118 (i): Cool Roof material meets specified criteria . ` ❑ ❑ ❑ Lighting Measures § 150(k)l: HIGH EFFICACY LUMINAIRES OTHER THAN OUTDOOR HID: contain only high efficacy lamps as outlined in Table ❑ X❑ ❑ 150-C, and do not contain a medium screw base socket (E24/E26). Ballasts for lamps 13 Watts or greater are electric and have an output frequency no less than 20 kHz. § 150(k)1: HIGH EFFICACY LUMINAIRES - OUTDOOR HID: contain only high efficacy lamps as outlined in Table 150-C, ❑ X❑ ❑ luminaire has factory installed HID ballast. § 150(k)2: Permanently installed luminaires in kitchens shall be high efficacy luminaires. Up to 50% of the Wattage, as determined ❑ ❑ in Section 130(c), of permanently installed luminaires in kitchens may be in luminaires that are not high efficacy luminaires, provided that these luminaires are controlled by switches separate from those controlling the high efficacy luminaires. § 150(k)3: Permanently installed luminaires in bathrooms, garages, laundry rooms, utility rooms shall be high efficacy luminaires. ❑ ❑X ❑ OR are controlled by an occupant sensor(s) certfied to comply with Section 119(d). § 150(k)4: Permanently installed luminaires located other than in kichens, bathrooms, garages, laundry rooms, and utility rooms shall be high efficacy luminaires (except closets less than 70 ft) OR are controlled by a dimmer switch OR are ❑ X❑ ❑ controlled by an occupant sensor that complies with Section 11 9(d) that does not tum on automatically or have an always on option. § 150(k)5: Luminaires that are recessed into insulated ceilings are approved for zero clearance insulation cover (IC) and are ❑ ❑X ❑ certified to ASTM E283 and labeled as air fight (AT) to less than 2.0 CFM at 75 Pascals. § 150(k)6: Luminaires providing outdoor lighting and permanently mounted to a residential building or to other buildings on the ❑ ❑X ❑ same lot shall be high efficacy luminaires (not including lighting around swimming poolstwater features or other Article 680 locations) OR are controlled by occupant sensors with integral photo control certified to comply with Section 119(d). § 150(k)7: Lighting for parking lots for 8 or more vehicles shall have lighting that complies with Sections 130, 132, and 147. ❑ ❑ ❑ Lighting for parking garages for 8 or more vehicles shall have lighting that complies with Section 130, 131, and 146. § 150(k)8: Permanently installed lighting in the enclosed, non -dwelling spaces of low-rise residential buildings with four or more ❑ ❑ ❑ dwelling units shall be high efficacy luminaires OR are controlled by occupant sensors) certified to comply with Section 119(d). t EnergyPro 4.3 by EnergySoft User Number. 6774, Job Number. 03142006 Page: 11 of 15 Residential Kitchen Lighting Worksheet WS -5R Lee Stirrette Main Residence MB 258/69-70 _ 12/1/2006 Project Title _ Date At least 50% of the total rated wattage of permanently installed luminaires in kitchens must be in luminaires that are high efficacy luminaires as defined in Table 150-C. Luminaires that are not high efficacy must be switched separately. Kitchen Lighting Schedule. Provide the following information for all luminaires to be installed in kitchens. High Efficacy Luminaire Type High Efficacy? Watts Quantity Watts Other Watts (1) 26w Cmpct Fluor Triple 4 Pin Electronic Yes X No 28.0 x 8 = 224 or (1) 2 ft Fluorescent T8 Electronic Yes X1 No I 1 22.0 x 4 = 88 or Yes No x = or Yes No x - or Yes No X = or Yes No x - or Yes No x= or Yes No x - or Yes No x = or Yes No x = or Yes. No x • = or Yes No x = or Yes No z - or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x = or Yes No x _ or Yes No x = or " Total A: 312 B: <' 0 COMPLIES IF AZ B YES ® NO ❑ 0 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Lee Stirrette Main Residence MB 258/69-70 12/1/2006 SYSTEM NAME ' FLOOR AREA HVAC System 1 Zone 1 1,035 INEERING C Number of Systems 1 Heating System Output per System 80,000 Total Output (Btuh) 80,000 Output (Btuh/sgft) 77.3 Cooling System Output per System 35,500 Total Output (Btuh) 35,500 Total Output (Tons) 3.0 Total Output (Btuh/sgft) 34.3 Total Output (sgft/Ton) 349.9 Air System CFM per System 1,200 Airflow (cfm) 1,200 Airflow (cfm/sgft) 1.16 Airflow (cfm/Ton) 405.6 Outside Air (%) 0.0 Outside Air (cfm/sgft) 0.00 Note: values above given at ARI conditions (EATING SYSTEM PSYCHROMETRICS 26.0 of 68.9 of 70.9 of Outside Air 0 cfm 68.9 of 11.0 / 77.6 of Outside �� 0 cfm COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent CFM Sensible Total Room Loads 1 661 Return Vented Lighting Return Air Ducts Return Fan Ventilation o Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD 13,197 1,630 0 1,368 o 0 0 2,480 1,368 18 414 1,630 HVAC EQUIPMENT SELECTION York CZE36/PV8B16100/G1FA48 29,187 1,842 80,000 Total Adjusted System Output �9 187 1 8az 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am rstream t e 133.5 OF Supply Fan Heating Coil 1200 cfm 77.1/63.0 of se Y EnergyPro 4.3 by EnergySoft 1% Return Air Ducts `S ROMETRICS (Airstream Temperatures at Time of Cooli 77.1 163.0 of 79.0/63.70F ® 56.2/54.90F Supply Fan 1200 cfm User Number. 6774 Cooling Coil Return Air Ducts " Job Number: 03142006 Supply Air Ducts 132.4 of ROOMS 70.0 of I Supply Air Ducts 57.2 / 55.3 of 47.6% R.H. ROOMS 76.0/62.6OF I 3of15 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Lee Stirrette Main Residence MB 258/69-70 12/1/2006 SYSTEM NAME FLOOR AREA HVAC System 2 Zone II , 1,950 ENGINEERING CHECKS SYSTEM LOAD Number of Systems 1 Heating System Output per System 80,000 Total Output (Btuh) 80,000 Output (Btuh/sgft) 41.0 Cooling System Output per System 54,600 Total Output (Btuh) 54,600 Total Output (Tons) 4.6 Total Output (Btuh/sgft) 28.0 Total Output (sgft/Ton) 428.6 Air System CFM per System 1,730 Airflow (cfm) 1,730 Airflow (cfm/sgft) 0.89 Airflow (cfmlTon) 380.2 Outside Air (%) 0.0 Outside Air (cfm/sgft) 0.00 Note: values above given at ARI conditions HEATING SYSTEM PSYCHROMETRICS 26.0 of 68.4 of 70.1 of Outside Air 4 0 cfm Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK 11COILHTG.PEAK CFM Sensiblel Latent I I CFM I Sensible 39,190 2,718 35,100 York CZE60/PV8C20100/G2FD60 46,933 0 80,000 Total Adjusted System Output x6,933 0 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am ream Temperatures at Time of Heating Peak) 113.5 of Supply Air Ducts Supply Fan Heating Coil 111.9 of 1730 cfm ROOMS 70.0 of 68.4 of Return Air Ducts DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 111.0 / 77.6 OF 77.7 / 62.0 OF 79.4 162.6 of 53.9 / 52.5 OF Supply Air Ducts Outside Air 0 cfm Supply Fan Cooling Coil 55.6/53.2 °F 1730 cfm 43.7% R.H. ROOMS 77.7/62.00F 76.0/61.4 OF 4.3 User Number: 6774 i Return Air Ducts Job Number: 03142006 MWIM 7 HVAC SYSTEM HEATING AND COOLING LOADS SUMMARY PROJECT NAME DATE Lee Stirrette Main Residence MB 258/69-70 12/1/2006 SYSTEM NAME FLOOR AREA • HVAC System 3 Zone III 993 ENGINEERING CHECKS ISYSTEM LOAD Number of Systems 1 Heating System Output per System 80,000 Total Output (Btuh) 80,000 Output (Btuh/sgft) 80.6 Cooling System Output per System 35,500 Total Output (Btuh) 35,500 Total Output (Tons) 3.0 Total Output (Btuh/sgft) 35.8 Total Output (sgft/Ton) 335.7 Air System CFM per System 1,200 Airflow (cfm) 1,200 Airflow (cfm/sgft) 1.21 Airflow (cfm/Ton) 405.6 Outside Air (%) 0.0 Outside Air (cfm/sqft) 0.00 Note: values above given at ARI conditions Total Room Loads Return Vented Lighting Return Air Ducts Return Fan Ventilation Supply Fan Supply Air Ducts TOTAL SYSTEM LOAD COIL COOLING PEAK COIL HTG. PEAK CFM Sensible Latent CFM Sensible 867 16,762 1,780 238 15,802 0 68.9 OF 70.8 OF 133.4 OF 1,738 1,459 0 0 0 0 0 0 0 2,480 0 cfm -2,480 1,738 1,459 2,718 1,780 16,239 York CZE36/PV8B16100/G1 FA48 29,155 2,020 80,000 Total Adjusted System Output29,155 2,020 80,000 (Adjusted for Peak Design Conditions) TIME OF SYSTEM PEAK Aug 2 pm Jan 12 am EATING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Heating Peak 26.0 OF 68.9 OF 70.8 OF 133.4 OF Supply Air Ducts x Outside Air : 0 cfm 132.3 of Supply Fan Heating Coil ROOMS 1200 cfm 70.0 of 68.9 of I Return Air Ducts DOLING SYSTEM PSYCHROMETRICS Airstream Temperatures at Time of Cooling Peak 111.0 / 77.6 OF 77.4 / 63.3 OF 79.3 / 64YF 56.5/55.20F Supply Air Ducts r�s, Outside Air 0 cfm Supply Fan Cooling Coil 57.8 / 55.8of 1200 cfm ROOMS 48.3% R.H. 76.0/62.8OF 77.4/63.3OF D.+,.— Air r,..,+. EnergyPro 4.3 by EnergySoft User Number. 6774 Job Number: 03142006 Page: 15 of 15