BMCH2016-006378-495 CALLE TAMPICO
LA QUINTA, CALIFORNIA 92253
T4hr 4 44lorw
COMMUNITY DEVELOPMENT DEPARTMENT
BUILDING PERMIT
Application Number:
BMCH2O16-0063
11111111111111111111
Property Address:,
57785 SEMINOLE DR 70
APN:
762380014
Application Description:
TRBOVICH RESIDENCE / HVAC CHANGE OUTS
Property Zoning:
Application Valuation:
$26,780.00
Applicant:
IE INC
31225 LA BAYA
WESTLAKE VILLAGE, CA 91362
LICENSED CONTRACTOR'S DECLARATION
I hereby affirm under penalty of perjury that I am licensed under provisions of Chapter
9 (commencing with Section 7000) of Division 3 of the Business and Professions Code,
and my License is in full force and effect.
License Class: C20 License No.: 763937
Date: 3LZ Ilo Contractor:
OWNER -BUILDER DECLARATION
I hereby affirm under penalty of perjury that I am exempt from the Contractor's State
License Law for the following reason (Sec. 7031.5, Business and Professions Code: Any
city or county that requires a permit to construct, alter, improve, demolish, or repair
any structure, prior to its issuance, also requires the applicant for the permit to file a
signed statement that he or she is licensed pursuant to the provisions of the
Contractor's State License Law (Chapter 9 (commencing with Section 7000) of Division
3 of the Business and Professions Code) or that he or she is exempt therefrom and the
basis for the alleged exemption. Any violation of Section 7031.5 by any applicant for a
permit subjects the applicant to a civil penalty of not more than five hundred dollars
($500).:
(1 I, as owner of the property, or my employees with wages as their sole
compensation, will do the work, and the structure is not intended or offered for sale.
(Sec. 7044, Business and Professions Code: The Contractors' State License Law does not
apply to an owner of property who builds or improves thereon, and who does the work
himself or herself through his or her own employees, provided that the improvements
are not intended or offered for sale. If, however, the building or improvement is sold
within one year of completion, the owner -builder will have the burden of proving that
he or she did not build or improve for the purpose of sale.).
(_) I, as owner of the property, am exclusively contracting with licensed contractors
to construct the project. (Sec. 7044, Business and Professions Code: The Contractors'
State License Law does not apply to an owner of property who builds or improves
thereon, and who contracts for the projects with a contractor(s) licensed pursuant to
the Contractors' State License Law.).
(_J I am exempt under Sec. . B.&P.C. for this reason
Date
Owner:
CONSTRUCTION LENDING AGENCY
I hereby affirm under penalty of perjury that there is a construction lending agency for
the performance of the work for which this permit is issued (Sec. 3097, Civ. C.).
Lender's
Lender's Add
=z�
'i
VOICE (760) 777j77125
1 ;�
21FU(.76U) 7.77-7011
IN5,P,.EICTIONS'(.760) 77-17153
Date- ° 3%2`2J2016
Owner:
TYRONE TRBOVICH
57785 SEMINOLE DR
LA QUINTA, CA 92253
Contractor:
VOTTA ENTERPRISES INC DBA COMFORT AIR
4803 E SUNNY DUNES RD
PALM SPRINGS, CA 92264
(760)320-5800
Llc. No.: 763937
WORKER'S COMPENSATION DECLARATION
I hereby affirm under penalty of perjury one of the following declarations:
I have and will maintain a certificate of consent to self -insure for workers'
compensation, as provided for by Section 3700 of the Labor Code, for the performance
of the work for which this permit is issued.
<<S I have and will maintain workers' compensation insurance, as required by
Section 3700 of the Labor Code, for the performance of the work for which this permit
is issued. My workers' compensation insurance carrier and polity number are:
Carrier:- Policy Number: _
I certify that in the performance of the work for which this permit is issued, I
shall not employ any person in any manner so as to become subject to the workers'
compensation laws of California, and agree that, if I should become subject to the
workers' compensation provisions of Section 3700 of the Labor Code, I shall forthwith
comply with those provisions.
Date: 3 LZ Ilo
Applicant:
WARNING: FAILURE TO SECURE WORKERS' COMPENSATION COVERAGE IS UNLAWFUL,
AND SHALL SUBJECT AN EMPLOYER TO CRIMINAL PENALTIES AND CIVIL FINES UP TO
ONE HUNDRED THOUSAND DOLLARS ($100,000). IN ADDITION TO THE COST OF
COMPENSATION, DAMAGES AS PROVIDED FOR IN SECTION 3706 OF THE LABOR CODE,
INTEREST, AND ATTORNEY'S FEES.
APPLICANT ACKNOWLEDGEMENT
IMPORTANT: Application is hereby made to the Building Official for a permit subject to
the conditions and restrictions set forth on this application.
1. Each person upon whose behalf this application is made, each person at whose
request and for whose benefit work is performed under or pursuant to any permit
issued as a result of this application , the owner, and the applicant, each agrees to, and
shall defend, indemnify and hold harmless the City of La Quinta, its officers, agents, and
employees fo'r any act or omission related to the work being performed under or
following issuance of this permit.
2. Any permit issued as a result of this application becomes null and void if work is
not commenced within 180 days from date of issuance of such permit, or cessation of
work for 180 days will subject permit to cancellation.
I certify that I have read this application and state that the above information is correct.
I agree to comply'with all city and county ordinances and state laws relating to building
construction, and hereby authorize representatives of this city to enter upon the
above-mentioned property for inspection purposes.
Date: 3 �� Signature (Applicant or Agent): �
FINANCIAL INFORMATION
DESCRIPTION ACCOUNT QTY_ AMOUNT
PAID PAID DATE
BSAS SB1473 FEE 101-0000-20306 0 $2.00
$2.00 3/22/16
PAID BY 'METHOD " RECEIPT #
CHECK # CLTD BY
IE INC CHECK R14084
30396 MFA
Total Paid for BUILDING STANDARDS ADMINISTRATION BSA: $2.00 $2.00
DESCRIPTION
ACCOUNT
QTY `
AMOUNT
PAID
PAID DATE
HVAC CHANGEOUT - SPLIT -SYSTEM
101-0000-42402
0
$145.04
$145.04
3/22/16
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
IE INC
CHECK
R14084
30396
MFA
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
HVAC CHANGEOUT - SPLIT -SYSTEM PC
101-0000-42600
0
$72.52
$72.52
3/22/16
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
IE INC
CHECK
R14084
30396
MFA
Total Paid for CHANGEOUT: $217.56 $217.56
DESCRIPTION
ACCOUNT.
QTY:
AMOUNT _
'PAID
PAID DATE
PERMIT ISSUANCE
101-0000-42404
0
$91.85
$91.85
3/22/16
PAID BY
METHOD
RECEIPT #
CHECK #
CLTD BY
IE INC
CHECK
R14084
30396
MFA
Total Paid for PERMIT ISSUANCE: $91.85 $91.85
Description: TRBOVICH RESIDENCE / HVAC CHANGE OUTS
CHRONOLOGY
Type: MECHANICAL Subtype: Status: ISSUED
Applied: 3/22/2016 MFA
Approved: 3/22/2016 MFA
Parcel No: 762380014 Site Address: 57785 SEMINOLE DR LA QUINTA,CA 92253
Subdivision: TR 29147-2 Block: Lot: 55
Issued: 3/22/2016 MFA
Lot Sq Ft: 0 Building Sq Ft: 0 Zoning:
Finaled:
valuation: $26,780.00 Occupancy Type: Construction Type:
Expired: 9/18/2016 MFA
No. Buildings: 0 No. Stories: 0 No. Unites: 0
NAME TYPE
Details: (2) HVAC CHANGE OUTS - 25 SEER/80AFUE SPLIT SYSTEM (1) 5 TON AND (1) 4 TON [2013 ENERGY) CARBON MONOXIDE ALARM(S) TO
ODES.•
BE INSTALLED PRIOR TO FINAL INSPECTION. 2013 CALIFORNIA BUILDING CODES.-
•• • •
CONDITIONS
CONTACTS
NAME TYPE
NAME
ADDRESSI
CITY
STATE
ZIP
PHONE
FAX
EMAIL
APPLICANT
IE INC
31225 LA BAYA
WESTLAKE
VILLAGE
CA
91362
(760)771-2734
CONTRACTOR
VOTTA ENTERPRISES INC DBA
COMFORT AIR
4803 E SUNNY DUNES
RD
PALM SPRINGS
CA
92264
(760)771-2734
OWNER
TYRONE TRBOVICH
57785 SEMINOLE DR
LA QUINTA
CA
92253
(760)771-2734
Printed: Tuesday, March 22, 2016 12:28:34 PM 1 of 2 ce
SYS7Cti1S
REVIEWS
REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED STATUS REMARKS NOTES
DATE
INFORMATION
ATTACHMENTS
LTD
CBY
DESCRIPTION
ACCOUNT
QTY
AMOUNT
PAID
PAID DATE
RECEIPT #
CHECK #
METHOD
PAID BY
BY
BSAS SB1473 FEE
101-0000-20306
0
$2.00
$2.00
3/22/16
R14084
30396
CHECK
IE INC
MFA
Total Paid for BUILDING STANDARDS ADMINISTRATION
$2.00 $2.00
BSA:
HVAC CHANGEOUT -
101-0000-42402
0
$145.04
$145.04
3/22/16
R14084
30396
CHECK
IE INC
MFA
SPLIT -SYSTEM
HVAC CHANGEOUT -
101-0000-42600
0
$72.52
$72.52
3/22/16
R14084
30396
CHECK
IE INC
MFA
SPLIT -SYSTEM PC
Total Paid for CHANGEOUT: $217.56 $217.56
PERMIT ISSUANCE
101-0000-42404
0.
$91.85
$91.85
3/22/16
R14084
30396
CHECK
IE INC
MFA
Total Paid for PERMIT ISSUANCE: $91.85 $91.85
TOTALS: $311.41 $311.41
REVIEWS
REVIEW TYPE REVIEWER SENT DATE DUE DATE RETURNED STATUS REMARKS NOTES
DATE
Printed: Tuesday, March 22, 2016 12:28:34 PM 2 of 2
SYSTEMS
BOND
INFORMATION
ATTACHMENTS
Printed: Tuesday, March 22, 2016 12:28:34 PM 2 of 2
SYSTEMS
STATE OF CALIFORNIA
ALTERATIONS - HVAC
r
CEC-CFIR-ALT-04-E Revised 03/15 CALIFORNIA ENERGY COMMISSION 'WSW
CERTIFICATE OF COMPLIANCE CFIR-ALT-04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Da Pre
Permit#:
C; �� L� Qu►n c.
tared:
3 ZZ
I
Equipment Type
Equipment Efficiency
New Ducting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged
[Evaporator Coil$0•AFUE
COP
2, ❑ R-6 (CZ 8-13) Ducting
Served by system
X Setback
System
><Condensing Unit
❑ R-8' (CZ 11, 14, 15) Ducting
210 to sgft
(If not already
XSplit System
❑ Compressor
-2S SEER
HSPF
❑ R-6 (all CZ's) Plenums
present, must
❑ Mini Split
❑ Lineset
EER
❑ R-5 or R7.5) Lineset"
be installed)
(Furnace
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
X1. HVAC Changeout/Repair
Required Compliance Documents to be left on site for Final:
All Equipment,
CFIR-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24)' -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24)-HERS2, MECH-25-HERS'
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (< 15%, or < 10% to outside, or seal all accessible leaks), Air Flow >_ 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if:
❑ 1. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building
❑ 2. New HVAC System
Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts'
CF1R-ALT-02-E
including Mini Split
CF2R: MECH-01, MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
CF3R: MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24)-HERS2, MECH-25-HERS'
Mini Splits require CF1R-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement
Required Compliance Documents to be left on site for Final:
All New Ducts' and one or more of the following
CF1R-ALT-02-E
replaced: Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace'
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Air Flow z 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: ❑ 1. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet
Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts'
CF1R-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
Installer Required to: Duct leakage (< 15% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos.
' All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls, between floors etc.
' Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
' All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5-2T-2%", 2.5-3T-2%", 3.5 to 4T-2%", 5T-4%"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR).
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
�Res onsible Designer Name:
Res Bible Designer Signature:
�� A
Dat Signed:
license:
7b3931
�eveh Schr�iexeir
-Z,
3 Z.2 1v
-
Company:
Coy --X04 A; -
Address:
y?,b3 FSmarr 1�►-�s�
City/State/Zip:
►��1
Phone:
•760-3za s -SCO
z
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300
14+oy-, S�j s� e-vy,
STATE OF CALIFOWA
ALTERATIONS - HVAC
iy
CEC-CFIR-ALT-04-E Revised 03/15 CALIFORNIA ENERGY COMMISSION '%W'
CERTIFICATE OF COMPLIANCE CF1R-ALT-04-E
Alterations - HVAC CZ 2, and 8-15 (formerly CF -IR -ALT -HVAC) (Page 1 of 1)
Site Address:
Enforcement Agency:
Dae
Prepared:
Permit#:
5%7S spm; O,e
Ci Z ,;,r� c.
3
-
Equipment Type
Equipment Efficiency
New ucting, Plenums, Lineset:
Conditioned
Thermostat
Required R -value
Floor Area (sq ft)
❑ Packaged
j8( Evaporator Coil
AFUE
COP
❑ R-6 (CZ 2, 8-13) Ducting
Served by system
XSetback
System
;KCondensing Unit
❑ R-8' (CZ 11, 14, 15) Ducting
2%C)C:> sgft
(If not already
Split System
❑ Compressor
SEER
HSPF
❑ R-6 (all CZ's) Plenums
present must
❑ Mini Split
❑ Lineset
EER
❑ R-5 or R7.5) Lineset'
be installed)
)g( Furnace
❑ TXV
HERS VERIFICATION SUMMARY Installer determines work to be completed and matches to one of the options below. At permit application this
form is allowed to be filled out by hand. For final inspection all forms are to be registered (no hand filled forms allowed) and a copy left on site.
1. HVAC Changeout/Repair
Required Compliance Documents to be left on site for Final:
All Equipment,
CFIR-ALT-02-E
Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24)' -HERS, MECH-25-HERS'
Compressor, TXV, Lineset,
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Air Handler/Furnace' (Can include new ducting)
Installer Requirement: Duct leakage (< 15%, or < 10% to outside, or seal all accessible leaks), Air Flow >_ 300 CFM/ton, Refrigerant Charge.
Exempted from duct leakage testing if:
❑ 1. Duct system registered with HERS provider as previously sealed, or ❑ 2. There is less than 40 linear feet of duct in unconditioned space, or
❑ 3. Existing duct systems are constructed, insulated or sealed with asbestos (list manufacture date of building1
❑ 2. New HVAC System Required Compliance Documents to be left on site for Final:
All new equipment and All New Ducts' CF1R-ALT-02-E
including Mini Split CF2R: MECH-01, MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
CF3R: MECH-20-HERS, MECH-22-HERS, MECH-(23 or 24) -HERS', MECH-25-HERS'
Mini Splits require CF1R-ALT-02-E, CF2R-MECH-01, and (CF2R-CF3R) MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Fan Efficacy (.58W/CFM), Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
❑ 3. All New Ducts with Replacement
Required Compliance Documents to be left on site for Final:
All New DuctS3 and one or more of the following
CF1R-ALT-02-E
replaced: Condenser Unit, Evaporator Coil,
CF2R: MECH-01, MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Compressor, TXV, Lineset, Furnace'
CF3R: MECH-20-HERS, MECH-(23 or 24) -HERS, MECH-25-HERS
Installer Requirement: Duct leakage < 6%, Air Flow >_ 350 CFM/ton (or alternative), Refrigerant Charge
Exempted from duct leakage testing if: ❑ 1. Existing duct systems are constructed, insulated or sealed with asbestos
❑ 4. New Ducting over 40 feet
Required Compliance Documents to be left on site for Final:
New ducting but less than All New Ducts'
CF1R-ALT-02-E, CF2R: MECH-20-HERS, CF3R: MECH-20-HERS
Installer Required to: Duct leakage (< 15% or, < 10% to outside or, or seal all accessible leaks)
❑ EXCEPTION: Existing duct systems constructed, insulated or sealed with asbestos.
'All new ducting R-8 required when more than 40 ft installed and R-6 when less than 40 ft installed. This includes in walls, between floors etc.
' Heating only systems and Air Handler/Furnace changes do not require Air Flow MECH-(23 or 24), or Refrigerant Charge verification MECH-25
3 All New Ducts is when at least 75 percent of the duct system is new duct material, and up to 25 percent may consist of reused parts from the
dwelling unit's existing duct system (e.g., registers, grilles, boots, air handler, coil, plenums, duct material)
° R-5 (1" thick insulation) for linesets 1" and less. R-7.5 (1.5" thick insulation) for linesets over 1 inch. Most mfg will require Suction line Diameter
with insulation as the following 1.5 -2T -2%/e", 2.5-3T-23/<", 3.5 to 4T -2%a", 5T-4%"
Contractor (Documentation Author's /Responsible Designer's Declaration Statement)
I certify the following under penalty of perjury, under the laws of the State of California:
1. The information provided on this Certificate of Compliance is true and correct.
2. 1 am eligible under Division 3 of the California Business and Professions Code to accept responsibility for the information on this document.
3. That the energy features and performance specifications for the design identified on this Certificate of Compliance conform to the
requirements of Title 24, Parts 1 and 6 of the California Code of Regulations (CCR).
4. That the energy features and performance specifications, materials, components, and manufactured devices for the building design or
system design identified on this Certificate of Compliance conform to the requirements of Title 24, Part 1 and Part 6 of the CCR.
5. The building design features or system design features identified on this Certificate of Compliance are consistent with the information
provided on other applicable compliance documents, worksheets, calculations, plans and specifications submitted to the enforcement
agency for approval with this building permit application.
Responsible Designer Name:
Re 'ble Designer Si nature:
Da[ Sign
license:
U/Gl'\JG� �G
3 �Co
763#3—%
Company:
Address:
City/State/Zip:
Phone:
I
�b :
y8b3 E 5.- meS-Q d
GZ.Z64
710n-3ZD-SSOO
For assistance or questions regarding the Energy Standards, contact the Energy Hotline at: 1-800-772-3300
13in
City of La Quinta
Building ez Safety Division '
. 78-495 Calle Tampico
La Quinta, CA 92253 - (760) 777-7012
Building Permit Application and Tracking Sheet
Permit #f
Project Address: S-"25 S
Owner's Name: • V
A. P. Number:
Address': 5`77$5 Se-bhp\�
Legal Description:
City, ST, Zip: La7 s3
Q�thJ a. GA q2
Contractor; C
Tcicplioiic. 7 (0O- 7-7) - z 13'+
c ��`; '<";a
s�,,�rf:.f: ✓ rte ,.
Address: id3 E Sv(.�n ovr'e�s
ProjeciDescription: �� 1 5�p��• g0,eno e
City, ST, Zip: m S '. GZZcdt
�3`cv:..Cow. Ic��i-N�/AC $Ula,.
Telephone: -7(,(>-3-2r10GLO
a
9TV_ e .kVQ.0
State Lic. # : 7103 q 3-7
City Lie. #
Arch., Engr., Designer:
`
Address: V
„
City, ST, Zip:
Telephone:
6s3s
Construction Type: Occupancy:.
Project type (circle one New Add'n Alter Repair Demo
State Lic. #:
Name of Contact Person: e ��Y1t
Sq Ft--# Slones::
# Units:
Telephone # of Contact Person: Elg --73S-7S7(,
Estimated Value of Project: p.•720, pO
APPLICANT: DO NOT WRITE BELOW THIS LINE
11
Submittal
Req'd
Recd
TRACKING
PERMIT FEES
Plan Sets
Plan Check submitted ,
Item
Amount
Structural Calcs.
Reviewed, ready for corrections
Pian Check Deposit
,
Truss C21cs.
Called Contact Person
Plan Check Balance
Title 24 Calcs.
Plans picked up
Construction °
Flood plain plan
Plans resubmitted
Mechanical
Grading plan
2°' Review, ready for corrcclions/issue
Electrical
Subcontactor List
Called Contact Person •
Plumbing
Grant Deed
`'
Plans picked up
S.1.4.I.
H.O.A. Approval
Plans resubmitted
Grading
IN ROUSE:-
'`'. Review, ready for corrections/issue
Developer Impact Fee
Planning Approval
Called Contact Person
A.1.P.P.
Pub, Wks. Appr
Date of permit issue
Total Permit Fees
A